diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8550.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8550.dtsi | 56 |
1 files changed, 51 insertions, 5 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 3a228d4f0c..e15564ed54 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -5,11 +5,13 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-videocc.h> +#include <dt-bindings/clock/qcom,sm8550-camcc.h> #include <dt-bindings/clock/qcom,sm8550-gcc.h> #include <dt-bindings/clock/qcom,sm8550-gpucc.h> #include <dt-bindings/clock/qcom,sm8550-tcsr.h> #include <dt-bindings/clock/qcom,sm8550-dispcc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> @@ -580,7 +582,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; mpss_dsm_mem: mpss-dsm-region@d4d00000 { @@ -1064,6 +1066,20 @@ status = "disabled"; }; + uart14: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>; + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + i2c15: i2c@89c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0089c000 0 0x4000>; @@ -2044,7 +2060,7 @@ #sound-dai-cells = <1>; }; - swr3: soundwire-controller@6ab0000 { + swr3: soundwire@6ab0000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06ab0000 0 0x10000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; @@ -2090,7 +2106,7 @@ #sound-dai-cells = <1>; }; - swr1: soundwire-controller@6ad0000 { + swr1: soundwire@6ad0000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06ad0000 0 0x10000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; @@ -2155,7 +2171,7 @@ #sound-dai-cells = <1>; }; - swr0: soundwire-controller@6b10000 { + swr0: soundwire@6b10000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06b10000 0 0x10000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; @@ -2182,7 +2198,7 @@ status = "disabled"; }; - swr2: soundwire-controller@6d30000 { + swr2: soundwire@6d30000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06d30000 0 0x10000>; interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, @@ -2430,6 +2446,20 @@ #power-domain-cells = <1>; }; + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8550-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8550_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3508,6 +3538,22 @@ bias-disable; }; + qup_uart14_default: qup-uart14-default-state { + /* TX, RX */ + pins = "gpio78", "gpio79"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart14_cts_rts: qup-uart14-cts-rts-state { + /* CTS, RTS */ + pins = "gpio76", "gpio77"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-down; + }; + sdc2_sleep: sdc2-sleep-state { clk-pins { pins = "sdc2_clk"; |