diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts new file mode 100644 index 0000000000..6a99816600 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2024 Uwe Kleine-König + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "rk3568.dtsi" + +/ { + model = "Qnap TS-433-4G NAS System 4-Bay"; + compatible = "qnap,ts433", "rockchip,rk3568"; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + rx_delay = <0x2f>; + tx_delay = <0x3c>; + status = "okay"; +}; + +&i2c0 { + pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + status = "okay"; + + rtc@51 { + compatible = "microcrystal,rv8263"; + reg = <0x51>; + wakeup-source; + }; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x1 { + /* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */ + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + status = "okay"; +}; + +/* + * Pins available on CN3 connector at TTL voltage level (3V3). + * ,_ _. + * |1234| 1=TX 2=VCC + * `----' 3=RX 4=GND + */ +&uart2 { + status = "okay"; +}; |