diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 816 |
1 files changed, 767 insertions, 49 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index b849648d51..61a634afaa 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -9,8 +9,8 @@ * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 */ -#include "k3-am654.dtsi" #include <dt-bindings/phy/phy.h> +#include <dt-bindings/net/ti-dp83867.h> / { aliases { @@ -27,6 +27,8 @@ spi0 = &mcu_spi0; mmc0 = &sdhci1; mmc1 = &sdhci0; + ethernet1 = &icssg0_emac0; + ethernet2 = &icssg0_emac1; }; chosen { @@ -111,9 +113,498 @@ #clock-cells = <0>; clock-frequency = <19200000>; }; + + /* Dual Ethernet application node on PRU-ICSSG0 */ + icssg0_eth: icssg0-eth { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_rgmii_pins_default>; + sram = <&msmc_ram>; + + ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, + <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>; + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; + + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + + ti,mii-g-rt = <&icssg0_mii_g_rt>; + ti,mii-rt = <&icssg0_mii_rt>; + ti,iep = <&icssg0_iep0>, <&icssg0_iep1>; + + interrupt-parent = <&icssg0_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + + dmas = <&main_udmap 0xc100>, /* egress slice 0 */ + <&main_udmap 0xc101>, /* egress slice 0 */ + <&main_udmap 0xc102>, /* egress slice 0 */ + <&main_udmap 0xc103>, /* egress slice 0 */ + <&main_udmap 0xc104>, /* egress slice 1 */ + <&main_udmap 0xc105>, /* egress slice 1 */ + <&main_udmap 0xc106>, /* egress slice 1 */ + <&main_udmap 0xc107>, /* egress slice 1 */ + <&main_udmap 0x4100>, /* ingress slice 0 */ + <&main_udmap 0x4101>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + icssg0_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg0_eth0_phy>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4100>; + ti,half-duplex-capable; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + icssg0_emac1: port@1 { + reg = <1>; + phy-handle = <&icssg0_eth1_phy>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4104>; + ti,half-duplex-capable; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; }; &wkup_pmx0 { + pinctrl-names = + "default", + "d0-uart0-rxd", "d0-gpio", "d0-gpio-pullup", "d0-gpio-pulldown", + "d1-uart0-txd", "d1-gpio", "d1-gpio-pullup", "d1-gpio-pulldown", + "d2-uart0-ctsn", "d2-gpio", "d2-gpio-pullup", "d2-gpio-pulldown", + "d3-uart0-rtsn", "d3-gpio", "d3-gpio-pullup", "d3-gpio-pulldown", + "d10-spi0-cs0", "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown", + "d11-spi0-d0", "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown", + "d12-spi0-d1", "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown", + "d13-spi0-clk", "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown", + "a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown", + "a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown", + "a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown", + "a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown", + "a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown", + "a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown"; + + pinctrl-0 = <&d0_uart0_rxd>; + pinctrl-1 = <&d0_uart0_rxd>; + pinctrl-2 = <&d0_gpio>; + pinctrl-3 = <&d0_gpio_pullup>; + pinctrl-4 = <&d0_gpio_pulldown>; + pinctrl-5 = <&d1_uart0_txd>; + pinctrl-6 = <&d1_gpio>; + pinctrl-7 = <&d1_gpio_pullup>; + pinctrl-8 = <&d1_gpio_pulldown>; + pinctrl-9 = <&d2_uart0_ctsn>; + pinctrl-10 = <&d2_gpio>; + pinctrl-11 = <&d2_gpio_pullup>; + pinctrl-12 = <&d2_gpio_pulldown>; + pinctrl-13 = <&d3_uart0_rtsn>; + pinctrl-14 = <&d3_gpio>; + pinctrl-15 = <&d3_gpio_pullup>; + pinctrl-16 = <&d3_gpio_pulldown>; + pinctrl-17 = <&d10_spi0_cs0>; + pinctrl-18 = <&d10_gpio>; + pinctrl-19 = <&d10_gpio_pullup>; + pinctrl-20 = <&d10_gpio_pulldown>; + pinctrl-21 = <&d11_spi0_d0>; + pinctrl-22 = <&d11_gpio>; + pinctrl-23 = <&d11_gpio_pullup>; + pinctrl-24 = <&d11_gpio_pulldown>; + pinctrl-25 = <&d12_spi0_d1>; + pinctrl-26 = <&d12_gpio>; + pinctrl-27 = <&d12_gpio_pullup>; + pinctrl-28 = <&d12_gpio_pulldown>; + pinctrl-29 = <&d13_spi0_clk>; + pinctrl-30 = <&d13_gpio>; + pinctrl-31 = <&d13_gpio_pullup>; + pinctrl-32 = <&d13_gpio_pulldown>; + pinctrl-33 = <&a0_gpio>; + pinctrl-34 = <&a0_gpio_pullup>; + pinctrl-35 = <&a0_gpio_pulldown>; + pinctrl-36 = <&a1_gpio>; + pinctrl-37 = <&a1_gpio_pullup>; + pinctrl-38 = <&a1_gpio_pulldown>; + pinctrl-39 = <&a2_gpio>; + pinctrl-40 = <&a2_gpio_pullup>; + pinctrl-41 = <&a2_gpio_pulldown>; + pinctrl-42 = <&a3_gpio>; + pinctrl-43 = <&a3_gpio_pullup>; + pinctrl-44 = <&a3_gpio_pulldown>; + pinctrl-45 = <&a4_gpio>; + pinctrl-46 = <&a4_gpio_pullup>; + pinctrl-47 = <&a4_gpio_pulldown>; + pinctrl-48 = <&a5_gpio>; + pinctrl-49 = <&a5_gpio_pullup>; + pinctrl-50 = <&a5_gpio_pulldown>; + + d0_uart0_rxd: d0-uart0-rxd-pins { + pinctrl-single,pins = < + /* (P4) MCU_UART0_RXD */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) + >; + }; + + d0_gpio: d0-gpio-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7) + >; + }; + + d0_gpio_pullup: d0-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7) + >; + }; + + d0_gpio_pulldown: d0-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d1_uart0_txd: d1-uart0-txd-pins { + pinctrl-single,pins = < + /* (P5) MCU_UART0_TXD */ + AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) + >; + }; + + d1_gpio: d1-gpio-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pullup: d1-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pulldown: d1-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d2_uart0_ctsn: d2-uart0-ctsn-pins { + pinctrl-single,pins = < + /* (P1) MCU_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) + >; + }; + + d2_gpio: d2-gpio-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pullup: d2-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pulldown: d2-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d3_uart0_rtsn: d3-uart0-rtsn-pins { + pinctrl-single,pins = < + /* (N3) MCU_UART0_RTSn */ + AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) + >; + }; + + d3_gpio: d3-gpio-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pullup: d3-gpio-pullup-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pulldown: d3-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d10_spi0_cs0: d10-spi0-cs0-pins { + pinctrl-single,pins = < + /* (Y4) MCU_SPI0_CS0 */ + AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) + >; + }; + + d10_gpio: d10-gpio-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pullup: d10-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pulldown: d10-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d11_spi0_d0: d11-spi0-d0-pins { + pinctrl-single,pins = < + /* (Y3) MCU_SPI0_D0 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) + >; + }; + + d11_gpio: d11-gpio-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pullup: d11-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pulldown: d11-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d12_spi0_d1: d12-spi0-d1-pins { + pinctrl-single,pins = < + /* (Y2) MCU_SPI0_D1 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) + >; + }; + + d12_gpio: d12-gpio-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pullup: d12-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pulldown: d12-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d13_spi0_clk: d13-spi0-clk-pins { + pinctrl-single,pins = < + /* (Y1) MCU_SPI0_CLK */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) + >; + }; + + d13_gpio: d13-gpio-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pullup: d13-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pulldown: d13-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a0_gpio: a0-gpio-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pullup: a0-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pulldown: a0-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a1_gpio: a1-gpio-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pullup: a1-gpio-pullup-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pulldown: a1-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a2_gpio: a2-gpio-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pullup: a2-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pulldown: a2-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a3_gpio: a3-gpio-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pullup: a3-gpio-pullup-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pulldown: a3-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a4_gpio: a4-gpio-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pullup: a4-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pulldown: a4-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a5_gpio: a5-gpio-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7) + >; + }; + + a5_gpio_pullup: a5-gpio-pullup-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7) + >; + }; + + a5_gpio_pulldown: a5-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7) + >; + }; + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < /* (AC7) WKUP_I2C0_SCL */ @@ -146,23 +637,6 @@ >; }; - arduino_uart_pins_default: arduino-uart-default-pins { - pinctrl-single,pins = < - /* (P4) MCU_UART0_RXD */ - AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) - /* (P5) MCU_UART0_TXD */ - AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) - >; - }; - - arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins { - pinctrl-single,pins = < - /* (P1) WKUP_GPIO0_31 */ - AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7) - /* (N3) WKUP_GPIO0_33 */ - AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7) - >; - }; arduino_io_oe_pins_default: arduino-io-oe-default-pins { pinctrl-single,pins = < @@ -242,6 +716,220 @@ }; &main_pmx0 { + pinctrl-names = + "default", + "d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown", + "d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown", + "d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown", + "d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown", + "d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown", + "d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown"; + + pinctrl-0 = <&d4_ehrpwm0_a>; + pinctrl-1 = <&d4_ehrpwm0_a>; + pinctrl-2 = <&d4_gpio>; + pinctrl-3 = <&d4_gpio_pullup>; + pinctrl-4 = <&d4_gpio_pulldown>; + + pinctrl-5 = <&d5_ehrpwm1_a>; + pinctrl-6 = <&d5_gpio>; + pinctrl-7 = <&d5_gpio_pullup>; + pinctrl-8 = <&d5_gpio_pulldown>; + + pinctrl-9 = <&d6_ehrpwm2_a>; + pinctrl-10 = <&d6_gpio>; + pinctrl-11 = <&d6_gpio_pullup>; + pinctrl-12 = <&d6_gpio_pulldown>; + + pinctrl-13 = <&d7_ehrpwm3_a>; + pinctrl-14 = <&d7_gpio>; + pinctrl-15 = <&d7_gpio_pullup>; + pinctrl-16 = <&d7_gpio_pulldown>; + + pinctrl-17 = <&d8_ehrpwm4_a>; + pinctrl-18 = <&d8_gpio>; + pinctrl-19 = <&d8_gpio_pullup>; + pinctrl-20 = <&d8_gpio_pulldown>; + + pinctrl-21 = <&d9_ehrpwm5_a>; + pinctrl-22 = <&d9_gpio>; + pinctrl-23 = <&d9_gpio_pullup>; + pinctrl-24 = <&d9_gpio_pulldown>; + + d4_ehrpwm0_a: d4-ehrpwm0-a-pins { + pinctrl-single,pins = < + /* (AG18) EHRPWM0_A */ + AM65X_IOPAD(0x0084, PIN_OUTPUT, 5) + >; + }; + + d4_gpio: d4-gpio-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + d4_gpio_pullup: d4-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) + >; + }; + + d4_gpio_pulldown: d4-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d5_ehrpwm1_a: d5-ehrpwm1-a-pins { + pinctrl-single,pins = < + /* (AF17) EHRPWM1_A */ + AM65X_IOPAD(0x008C, PIN_OUTPUT, 5) + >; + }; + + d5_gpio: d5-gpio-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT, 7) + >; + }; + + d5_gpio_pullup: d5-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7) + >; + }; + + d5_gpio_pulldown: d5-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d6_ehrpwm2_a: d6-ehrpwm2-a-pins { + pinctrl-single,pins = < + /* (AH16) EHRPWM2_A */ + AM65X_IOPAD(0x0098, PIN_OUTPUT, 5) + >; + }; + + d6_gpio: d6-gpio-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d6_gpio_pullup: d6-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7) + >; + }; + + d6_gpio_pulldown: d6-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d7_ehrpwm3_a: d7-ehrpwm3-a-pins { + pinctrl-single,pins = < + /* (AH15) EHRPWM3_A */ + AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5) + >; + }; + + d7_gpio: d7-gpio-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT, 7) + >; + }; + + d7_gpio_pullup: d7-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7) + >; + }; + + d7_gpio_pulldown: d7-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d8_ehrpwm4_a: d8-ehrpwm4-a-pins { + pinctrl-single,pins = < + /* (AG15) EHRPWM4_A */ + AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5) + >; + }; + + d8_gpio: d8-gpio-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT, 7) + >; + }; + + d8_gpio_pullup: d8-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7) + >; + }; + + d8_gpio_pulldown: d8-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d9_ehrpwm5_a: d9-ehrpwm5-a-pins { + pinctrl-single,pins = < + /* (AD15) EHRPWM5_A */ + AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5) + >; + }; + + d9_gpio: d9-gpio-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT, 7) + >; + }; + + d9_gpio_pullup: d9-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7) + >; + }; + + d9_gpio_pulldown: d9-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7) + >; + }; + + main_pcie_enable_pins_default: main-pcie-enable-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ + >; + }; + main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ @@ -283,17 +971,6 @@ >; }; - arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */ - AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */ - AM65X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (AH16) GPIO0_38 */ - AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7) /* (AH15) GPIO0_43 */ - AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7) /* (AG15) GPIO0_48 */ - AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7) /* (AD15) GPIO0_51 */ - >; - }; - dss_vout1_pins_default: dss-vout1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ @@ -339,6 +1016,43 @@ AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ >; }; + + icssg0_mdio_pins_default: icssg0-mdio-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */ + AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */ + >; + }; + + icssg0_rgmii_pins_default: icssg0-rgmii-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */ + AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */ + AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */ + AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */ + AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */ + AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */ + AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */ + AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */ + AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */ + AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */ + AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */ + AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */ + + AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */ + AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */ + AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */ + AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */ + AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */ + AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */ + AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */ + AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */ + AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */ + AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */ + AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */ + AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */ + >; + }; }; &main_pmx1 { @@ -355,12 +1069,6 @@ AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ >; }; - - ecap0_pins_default: ecap0-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ - >; - }; }; &wkup_uart0 { @@ -376,13 +1084,9 @@ &mcu_uart0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&arduino_uart_pins_default>; }; &main_gpio0 { - pinctrl-names = "default"; - pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>; gpio-line-names = "main_gpio0-base", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", @@ -392,10 +1096,14 @@ "", "IO9"; }; +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_pcie_enable_pins_default>; +}; + &wkup_gpio0 { pinctrl-names = "default"; pinctrl-0 = - <&arduino_io_d2_to_d3_pins_default>, <&arduino_i2c_aio_switch_pins_default>, <&arduino_io_oe_pins_default>, <&push_button_pins_default>, @@ -557,13 +1265,8 @@ status = "disabled"; }; -&ecap0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap0_pins_default>; -}; - &sdhci1 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; @@ -584,9 +1287,6 @@ &mcu_spi0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_spi0_pins_default>; - #address-cells = <1>; #size-cells = <0>; ti,pindir-d0-out-d1-in; @@ -726,3 +1426,21 @@ <&mcu_r5fss0_core1_memory_region>; mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; + +&icssg0_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_mdio_pins_default>; + + icssg0_eth0_phy: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + + icssg0_eth1_phy: ethernet-phy@1 { + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; |