summaryrefslogtreecommitdiffstats
path: root/arch/m68k/fpsp040/bugfix.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/fpsp040/bugfix.S')
-rw-r--r--arch/m68k/fpsp040/bugfix.S495
1 files changed, 495 insertions, 0 deletions
diff --git a/arch/m68k/fpsp040/bugfix.S b/arch/m68k/fpsp040/bugfix.S
new file mode 100644
index 000000000..3bb9c84bb
--- /dev/null
+++ b/arch/m68k/fpsp040/bugfix.S
@@ -0,0 +1,495 @@
+|
+| bugfix.sa 3.2 1/31/91
+|
+|
+| This file contains workarounds for bugs in the 040
+| relating to the Floating-Point Software Package (FPSP)
+|
+| Fixes for bugs: 1238
+|
+| Bug: 1238
+|
+|
+| /* The following dirty_bit clear should be left in
+| * the handler permanently to improve throughput.
+| * The dirty_bits are located at bits [23:16] in
+| * longword $08 in the busy frame $4x60. Bit 16
+| * corresponds to FP0, bit 17 corresponds to FP1,
+| * and so on.
+| */
+| if (E3_exception_just_serviced) {
+| dirty_bit[cmdreg3b[9:7]] = 0;
+| }
+|
+| if (fsave_format_version != $40) {goto NOFIX}
+|
+| if !(E3_exception_just_serviced) {goto NOFIX}
+| if (cupc == 0000000) {goto NOFIX}
+| if ((cmdreg1b[15:13] != 000) &&
+| (cmdreg1b[15:10] != 010001)) {goto NOFIX}
+| if (((cmdreg1b[15:13] != 000) || ((cmdreg1b[12:10] != cmdreg2b[9:7]) &&
+| (cmdreg1b[12:10] != cmdreg3b[9:7])) ) &&
+| ((cmdreg1b[ 9: 7] != cmdreg2b[9:7]) &&
+| (cmdreg1b[ 9: 7] != cmdreg3b[9:7])) ) {goto NOFIX}
+|
+| /* Note: for 6d43b or 8d43b, you may want to add the following code
+| * to get better coverage. (If you do not insert this code, the part
+| * won't lock up; it will simply get the wrong answer.)
+| * Do NOT insert this code for 10d43b or later parts.
+| *
+| * if (fpiarcu == integer stack return address) {
+| * cupc = 0000000;
+| * goto NOFIX;
+| * }
+| */
+|
+| if (cmdreg1b[15:13] != 000) {goto FIX_OPCLASS2}
+| FIX_OPCLASS0:
+| if (((cmdreg1b[12:10] == cmdreg2b[9:7]) ||
+| (cmdreg1b[ 9: 7] == cmdreg2b[9:7])) &&
+| (cmdreg1b[12:10] != cmdreg3b[9:7]) &&
+| (cmdreg1b[ 9: 7] != cmdreg3b[9:7])) { /* xu conflict only */
+| /* We execute the following code if there is an
+| xu conflict and NOT an nu conflict */
+|
+| /* first save some values on the fsave frame */
+| stag_temp = STAG[fsave_frame];
+| cmdreg1b_temp = CMDREG1B[fsave_frame];
+| dtag_temp = DTAG[fsave_frame];
+| ete15_temp = ETE15[fsave_frame];
+|
+| CUPC[fsave_frame] = 0000000;
+| FRESTORE
+| FSAVE
+|
+| /* If the xu instruction is exceptional, we punt.
+| * Otherwise, we would have to include OVFL/UNFL handler
+| * code here to get the correct answer.
+| */
+| if (fsave_frame_format == $4060) {goto KILL_PROCESS}
+|
+| fsave_frame = /* build a long frame of all zeros */
+| fsave_frame_format = $4060; /* label it as long frame */
+|
+| /* load it with the temps we saved */
+| STAG[fsave_frame] = stag_temp;
+| CMDREG1B[fsave_frame] = cmdreg1b_temp;
+| DTAG[fsave_frame] = dtag_temp;
+| ETE15[fsave_frame] = ete15_temp;
+|
+| /* Make sure that the cmdreg3b dest reg is not going to
+| * be destroyed by a FMOVEM at the end of all this code.
+| * If it is, you should move the current value of the reg
+| * onto the stack so that the reg will loaded with that value.
+| */
+|
+| /* All done. Proceed with the code below */
+| }
+|
+| etemp = FP_reg_[cmdreg1b[12:10]];
+| ete15 = ~ete14;
+| cmdreg1b[15:10] = 010010;
+| clear(bug_flag_procIDxxxx);
+| FRESTORE and return;
+|
+|
+| FIX_OPCLASS2:
+| if ((cmdreg1b[9:7] == cmdreg2b[9:7]) &&
+| (cmdreg1b[9:7] != cmdreg3b[9:7])) { /* xu conflict only */
+| /* We execute the following code if there is an
+| xu conflict and NOT an nu conflict */
+|
+| /* first save some values on the fsave frame */
+| stag_temp = STAG[fsave_frame];
+| cmdreg1b_temp = CMDREG1B[fsave_frame];
+| dtag_temp = DTAG[fsave_frame];
+| ete15_temp = ETE15[fsave_frame];
+| etemp_temp = ETEMP[fsave_frame];
+|
+| CUPC[fsave_frame] = 0000000;
+| FRESTORE
+| FSAVE
+|
+|
+| /* If the xu instruction is exceptional, we punt.
+| * Otherwise, we would have to include OVFL/UNFL handler
+| * code here to get the correct answer.
+| */
+| if (fsave_frame_format == $4060) {goto KILL_PROCESS}
+|
+| fsave_frame = /* build a long frame of all zeros */
+| fsave_frame_format = $4060; /* label it as long frame */
+|
+| /* load it with the temps we saved */
+| STAG[fsave_frame] = stag_temp;
+| CMDREG1B[fsave_frame] = cmdreg1b_temp;
+| DTAG[fsave_frame] = dtag_temp;
+| ETE15[fsave_frame] = ete15_temp;
+| ETEMP[fsave_frame] = etemp_temp;
+|
+| /* Make sure that the cmdreg3b dest reg is not going to
+| * be destroyed by a FMOVEM at the end of all this code.
+| * If it is, you should move the current value of the reg
+| * onto the stack so that the reg will loaded with that value.
+| */
+|
+| /* All done. Proceed with the code below */
+| }
+|
+| if (etemp_exponent == min_sgl) etemp_exponent = min_dbl;
+| if (etemp_exponent == max_sgl) etemp_exponent = max_dbl;
+| cmdreg1b[15:10] = 010101;
+| clear(bug_flag_procIDxxxx);
+| FRESTORE and return;
+|
+|
+| NOFIX:
+| clear(bug_flag_procIDxxxx);
+| FRESTORE and return;
+|
+
+
+| Copyright (C) Motorola, Inc. 1990
+| All Rights Reserved
+|
+| For details on the license for this file, please see the
+| file, README, in this same directory.
+
+|BUGFIX idnt 2,1 | Motorola 040 Floating Point Software Package
+
+ |section 8
+
+#include "fpsp.h"
+
+ |xref fpsp_fmt_error
+
+ .global b1238_fix
+b1238_fix:
+|
+| This code is entered only on completion of the handling of an
+| nu-generated ovfl, unfl, or inex exception. If the version
+| number of the fsave is not $40, this handler is not necessary.
+| Simply branch to fix_done and exit normally.
+|
+ cmpib #VER_40,4(%a7)
+ bne fix_done
+|
+| Test for cu_savepc equal to zero. If not, this is not a bug
+| #1238 case.
+|
+ moveb CU_SAVEPC(%a6),%d0
+ andib #0xFE,%d0
+ beq fix_done |if zero, this is not bug #1238
+
+|
+| Test the register conflict aspect. If opclass0, check for
+| cu src equal to xu dest or equal to nu dest. If so, go to
+| op0. Else, or if opclass2, check for cu dest equal to
+| xu dest or equal to nu dest. If so, go to tst_opcl. Else,
+| exit, it is not the bug case.
+|
+| Check for opclass 0. If not, go and check for opclass 2 and sgl.
+|
+ movew CMDREG1B(%a6),%d0
+ andiw #0xE000,%d0 |strip all but opclass
+ bne op2sgl |not opclass 0, check op2
+|
+| Check for cu and nu register conflict. If one exists, this takes
+| priority over a cu and xu conflict.
+|
+ bfextu CMDREG1B(%a6){#3:#3},%d0 |get 1st src
+ bfextu CMDREG3B(%a6){#6:#3},%d1 |get 3rd dest
+ cmpb %d0,%d1
+ beqs op0 |if equal, continue bugfix
+|
+| Check for cu dest equal to nu dest. If so, go and fix the
+| bug condition. Otherwise, exit.
+|
+ bfextu CMDREG1B(%a6){#6:#3},%d0 |get 1st dest
+ cmpb %d0,%d1 |cmp 1st dest with 3rd dest
+ beqs op0 |if equal, continue bugfix
+|
+| Check for cu and xu register conflict.
+|
+ bfextu CMDREG2B(%a6){#6:#3},%d1 |get 2nd dest
+ cmpb %d0,%d1 |cmp 1st dest with 2nd dest
+ beqs op0_xu |if equal, continue bugfix
+ bfextu CMDREG1B(%a6){#3:#3},%d0 |get 1st src
+ cmpb %d0,%d1 |cmp 1st src with 2nd dest
+ beq op0_xu
+ bne fix_done |if the reg checks fail, exit
+|
+| We have the opclass 0 situation.
+|
+op0:
+ bfextu CMDREG1B(%a6){#3:#3},%d0 |get source register no
+ movel #7,%d1
+ subl %d0,%d1
+ clrl %d0
+ bsetl %d1,%d0
+ fmovemx %d0,ETEMP(%a6) |load source to ETEMP
+
+ moveb #0x12,%d0
+ bfins %d0,CMDREG1B(%a6){#0:#6} |opclass 2, extended
+|
+| Set ETEMP exponent bit 15 as the opposite of ete14
+|
+ btst #6,ETEMP_EX(%a6) |check etemp exponent bit 14
+ beq setete15
+ bclr #etemp15_bit,STAG(%a6)
+ bra finish
+setete15:
+ bset #etemp15_bit,STAG(%a6)
+ bra finish
+
+|
+| We have the case in which a conflict exists between the cu src or
+| dest and the dest of the xu. We must clear the instruction in
+| the cu and restore the state, allowing the instruction in the
+| xu to complete. Remember, the instruction in the nu
+| was exceptional, and was completed by the appropriate handler.
+| If the result of the xu instruction is not exceptional, we can
+| restore the instruction from the cu to the frame and continue
+| processing the original exception. If the result is also
+| exceptional, we choose to kill the process.
+|
+| Items saved from the stack:
+|
+| $3c stag - L_SCR1
+| $40 cmdreg1b - L_SCR2
+| $44 dtag - L_SCR3
+|
+| The cu savepc is set to zero, and the frame is restored to the
+| fpu.
+|
+op0_xu:
+ movel STAG(%a6),L_SCR1(%a6)
+ movel CMDREG1B(%a6),L_SCR2(%a6)
+ movel DTAG(%a6),L_SCR3(%a6)
+ andil #0xe0000000,L_SCR3(%a6)
+ moveb #0,CU_SAVEPC(%a6)
+ movel (%a7)+,%d1 |save return address from bsr
+ frestore (%a7)+
+ fsave -(%a7)
+|
+| Check if the instruction which just completed was exceptional.
+|
+ cmpw #0x4060,(%a7)
+ beq op0_xb
+|
+| It is necessary to isolate the result of the instruction in the
+| xu if it is to fp0 - fp3 and write that value to the USER_FPn
+| locations on the stack. The correct destination register is in
+| cmdreg2b.
+|
+ bfextu CMDREG2B(%a6){#6:#3},%d0 |get dest register no
+ cmpil #3,%d0
+ bgts op0_xi
+ beqs op0_fp3
+ cmpil #1,%d0
+ blts op0_fp0
+ beqs op0_fp1
+op0_fp2:
+ fmovemx %fp2-%fp2,USER_FP2(%a6)
+ bras op0_xi
+op0_fp1:
+ fmovemx %fp1-%fp1,USER_FP1(%a6)
+ bras op0_xi
+op0_fp0:
+ fmovemx %fp0-%fp0,USER_FP0(%a6)
+ bras op0_xi
+op0_fp3:
+ fmovemx %fp3-%fp3,USER_FP3(%a6)
+|
+| The frame returned is idle. We must build a busy frame to hold
+| the cu state information and setup etemp.
+|
+op0_xi:
+ movel #22,%d0 |clear 23 lwords
+ clrl (%a7)
+op0_loop:
+ clrl -(%a7)
+ dbf %d0,op0_loop
+ movel #0x40600000,-(%a7)
+ movel L_SCR1(%a6),STAG(%a6)
+ movel L_SCR2(%a6),CMDREG1B(%a6)
+ movel L_SCR3(%a6),DTAG(%a6)
+ moveb #0x6,CU_SAVEPC(%a6)
+ movel %d1,-(%a7) |return bsr return address
+ bfextu CMDREG1B(%a6){#3:#3},%d0 |get source register no
+ movel #7,%d1
+ subl %d0,%d1
+ clrl %d0
+ bsetl %d1,%d0
+ fmovemx %d0,ETEMP(%a6) |load source to ETEMP
+
+ moveb #0x12,%d0
+ bfins %d0,CMDREG1B(%a6){#0:#6} |opclass 2, extended
+|
+| Set ETEMP exponent bit 15 as the opposite of ete14
+|
+ btst #6,ETEMP_EX(%a6) |check etemp exponent bit 14
+ beq op0_sete15
+ bclr #etemp15_bit,STAG(%a6)
+ bra finish
+op0_sete15:
+ bset #etemp15_bit,STAG(%a6)
+ bra finish
+
+|
+| The frame returned is busy. It is not possible to reconstruct
+| the code sequence to allow completion. We will jump to
+| fpsp_fmt_error and allow the kernel to kill the process.
+|
+op0_xb:
+ jmp fpsp_fmt_error
+
+|
+| Check for opclass 2 and single size. If not both, exit.
+|
+op2sgl:
+ movew CMDREG1B(%a6),%d0
+ andiw #0xFC00,%d0 |strip all but opclass and size
+ cmpiw #0x4400,%d0 |test for opclass 2 and size=sgl
+ bne fix_done |if not, it is not bug 1238
+|
+| Check for cu dest equal to nu dest or equal to xu dest, with
+| a cu and nu conflict taking priority an nu conflict. If either,
+| go and fix the bug condition. Otherwise, exit.
+|
+ bfextu CMDREG1B(%a6){#6:#3},%d0 |get 1st dest
+ bfextu CMDREG3B(%a6){#6:#3},%d1 |get 3rd dest
+ cmpb %d0,%d1 |cmp 1st dest with 3rd dest
+ beq op2_com |if equal, continue bugfix
+ bfextu CMDREG2B(%a6){#6:#3},%d1 |get 2nd dest
+ cmpb %d0,%d1 |cmp 1st dest with 2nd dest
+ bne fix_done |if the reg checks fail, exit
+|
+| We have the case in which a conflict exists between the cu src or
+| dest and the dest of the xu. We must clear the instruction in
+| the cu and restore the state, allowing the instruction in the
+| xu to complete. Remember, the instruction in the nu
+| was exceptional, and was completed by the appropriate handler.
+| If the result of the xu instruction is not exceptional, we can
+| restore the instruction from the cu to the frame and continue
+| processing the original exception. If the result is also
+| exceptional, we choose to kill the process.
+|
+| Items saved from the stack:
+|
+| $3c stag - L_SCR1
+| $40 cmdreg1b - L_SCR2
+| $44 dtag - L_SCR3
+| etemp - FP_SCR2
+|
+| The cu savepc is set to zero, and the frame is restored to the
+| fpu.
+|
+op2_xu:
+ movel STAG(%a6),L_SCR1(%a6)
+ movel CMDREG1B(%a6),L_SCR2(%a6)
+ movel DTAG(%a6),L_SCR3(%a6)
+ andil #0xe0000000,L_SCR3(%a6)
+ moveb #0,CU_SAVEPC(%a6)
+ movel ETEMP(%a6),FP_SCR2(%a6)
+ movel ETEMP_HI(%a6),FP_SCR2+4(%a6)
+ movel ETEMP_LO(%a6),FP_SCR2+8(%a6)
+ movel (%a7)+,%d1 |save return address from bsr
+ frestore (%a7)+
+ fsave -(%a7)
+|
+| Check if the instruction which just completed was exceptional.
+|
+ cmpw #0x4060,(%a7)
+ beq op2_xb
+|
+| It is necessary to isolate the result of the instruction in the
+| xu if it is to fp0 - fp3 and write that value to the USER_FPn
+| locations on the stack. The correct destination register is in
+| cmdreg2b.
+|
+ bfextu CMDREG2B(%a6){#6:#3},%d0 |get dest register no
+ cmpil #3,%d0
+ bgts op2_xi
+ beqs op2_fp3
+ cmpil #1,%d0
+ blts op2_fp0
+ beqs op2_fp1
+op2_fp2:
+ fmovemx %fp2-%fp2,USER_FP2(%a6)
+ bras op2_xi
+op2_fp1:
+ fmovemx %fp1-%fp1,USER_FP1(%a6)
+ bras op2_xi
+op2_fp0:
+ fmovemx %fp0-%fp0,USER_FP0(%a6)
+ bras op2_xi
+op2_fp3:
+ fmovemx %fp3-%fp3,USER_FP3(%a6)
+|
+| The frame returned is idle. We must build a busy frame to hold
+| the cu state information and fix up etemp.
+|
+op2_xi:
+ movel #22,%d0 |clear 23 lwords
+ clrl (%a7)
+op2_loop:
+ clrl -(%a7)
+ dbf %d0,op2_loop
+ movel #0x40600000,-(%a7)
+ movel L_SCR1(%a6),STAG(%a6)
+ movel L_SCR2(%a6),CMDREG1B(%a6)
+ movel L_SCR3(%a6),DTAG(%a6)
+ moveb #0x6,CU_SAVEPC(%a6)
+ movel FP_SCR2(%a6),ETEMP(%a6)
+ movel FP_SCR2+4(%a6),ETEMP_HI(%a6)
+ movel FP_SCR2+8(%a6),ETEMP_LO(%a6)
+ movel %d1,-(%a7)
+ bra op2_com
+
+|
+| We have the opclass 2 single source situation.
+|
+op2_com:
+ moveb #0x15,%d0
+ bfins %d0,CMDREG1B(%a6){#0:#6} |opclass 2, double
+
+ cmpw #0x407F,ETEMP_EX(%a6) |single +max
+ bnes case2
+ movew #0x43FF,ETEMP_EX(%a6) |to double +max
+ bra finish
+case2:
+ cmpw #0xC07F,ETEMP_EX(%a6) |single -max
+ bnes case3
+ movew #0xC3FF,ETEMP_EX(%a6) |to double -max
+ bra finish
+case3:
+ cmpw #0x3F80,ETEMP_EX(%a6) |single +min
+ bnes case4
+ movew #0x3C00,ETEMP_EX(%a6) |to double +min
+ bra finish
+case4:
+ cmpw #0xBF80,ETEMP_EX(%a6) |single -min
+ bne fix_done
+ movew #0xBC00,ETEMP_EX(%a6) |to double -min
+ bra finish
+|
+| The frame returned is busy. It is not possible to reconstruct
+| the code sequence to allow completion. fpsp_fmt_error causes
+| an fline illegal instruction to be executed.
+|
+| You should replace the jump to fpsp_fmt_error with a jump
+| to the entry point used to kill a process.
+|
+op2_xb:
+ jmp fpsp_fmt_error
+
+|
+| Enter here if the case is not of the situations affected by
+| bug #1238, or if the fix is completed, and exit.
+|
+finish:
+fix_done:
+ rts
+
+ |end