diff options
Diffstat (limited to 'arch/powerpc/include/asm/reg_8xx.h')
| -rw-r--r-- | arch/powerpc/include/asm/reg_8xx.h | 83 |
1 files changed, 83 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h new file mode 100644 index 000000000..299ee7be0 --- /dev/null +++ b/arch/powerpc/include/asm/reg_8xx.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Contains register definitions common to PowerPC 8xx CPUs. Notice + */ +#ifndef _ASM_POWERPC_REG_8xx_H +#define _ASM_POWERPC_REG_8xx_H + +/* Cache control on the MPC8xx is provided through some additional + * special purpose registers. + */ +#define SPRN_IC_CST 560 /* Instruction cache control/status */ +#define SPRN_IC_ADR 561 /* Address needed for some commands */ +#define SPRN_IC_DAT 562 /* Read-only data register */ +#define SPRN_DC_CST 568 /* Data cache control/status */ +#define SPRN_DC_ADR 569 /* Address needed for some commands */ +#define SPRN_DC_DAT 570 /* Read-only data register */ + +/* Misc Debug */ +#define SPRN_DPDR 630 +#define SPRN_MI_CAM 816 +#define SPRN_MI_RAM0 817 +#define SPRN_MI_RAM1 818 +#define SPRN_MD_CAM 824 +#define SPRN_MD_RAM0 825 +#define SPRN_MD_RAM1 826 + +/* Special MSR manipulation registers */ +#define SPRN_EIE 80 /* External interrupt enable (EE=1, RI=1) */ +#define SPRN_EID 81 /* External interrupt disable (EE=0, RI=1) */ +#define SPRN_NRI 82 /* Non recoverable interrupt (EE=0, RI=0) */ + +/* Debug registers */ +#define SPRN_CMPA 144 +#define SPRN_COUNTA 150 +#define SPRN_CMPE 152 +#define SPRN_CMPF 153 +#define SPRN_LCTRL1 156 +#define LCTRL1_CTE_GT 0xc0000000 +#define LCTRL1_CTF_LT 0x14000000 +#define LCTRL1_CRWE_RW 0x00000000 +#define LCTRL1_CRWE_RO 0x00040000 +#define LCTRL1_CRWE_WO 0x000c0000 +#define LCTRL1_CRWF_RW 0x00000000 +#define LCTRL1_CRWF_RO 0x00010000 +#define LCTRL1_CRWF_WO 0x00030000 +#define SPRN_LCTRL2 157 +#define LCTRL2_LW0EN 0x80000000 +#define LCTRL2_LW0LA_E 0x00000000 +#define LCTRL2_LW0LA_F 0x04000000 +#define LCTRL2_LW0LA_EandF 0x08000000 +#define LCTRL2_LW0LADC 0x02000000 +#define LCTRL2_SLW0EN 0x00000002 +#ifdef CONFIG_PPC_8xx +#define SPRN_ICTRL 158 +#endif +#define SPRN_BAR 159 + +/* Commands. Only the first few are available to the instruction cache. +*/ +#define IDC_ENABLE 0x02000000 /* Cache enable */ +#define IDC_DISABLE 0x04000000 /* Cache disable */ +#define IDC_LDLCK 0x06000000 /* Load and lock */ +#define IDC_UNLINE 0x08000000 /* Unlock line */ +#define IDC_UNALL 0x0a000000 /* Unlock all */ +#define IDC_INVALL 0x0c000000 /* Invalidate all */ + +#define DC_FLINE 0x0e000000 /* Flush data cache line */ +#define DC_SFWT 0x01000000 /* Set forced writethrough mode */ +#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ +#define DC_SLES 0x05000000 /* Set little endian swap mode */ +#define DC_CLES 0x07000000 /* Clear little endian swap mode */ + +/* Status. +*/ +#define IDC_ENABLED 0x80000000 /* Cache is enabled */ +#define IDC_CERR1 0x00200000 /* Cache error 1 */ +#define IDC_CERR2 0x00100000 /* Cache error 2 */ +#define IDC_CERR3 0x00080000 /* Cache error 3 */ + +#define DC_DFWT 0x40000000 /* Data cache is forced write through */ +#define DC_LES 0x20000000 /* Caches are little endian mode */ + +#endif /* _ASM_POWERPC_REG_8xx_H */ |