diff options
Diffstat (limited to 'arch/powerpc/platforms/83xx/usb_834x.c')
-rw-r--r-- | arch/powerpc/platforms/83xx/usb_834x.c | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/83xx/usb_834x.c b/arch/powerpc/platforms/83xx/usb_834x.c new file mode 100644 index 0000000000..3a8d6c662d --- /dev/null +++ b/arch/powerpc/platforms/83xx/usb_834x.c @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Freescale 83xx USB SOC setup code + * + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Author: Li Yang + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/io.h> + +#include <sysdev/fsl_soc.h> + +#include "mpc83xx.h" + +int __init mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl, sicrh; + void __iomem *immap; + struct device_node *np = NULL; + int port0_is_dr = 0, port1_is_dr = 0; + const void *prop, *dr_mode; + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -ENOMEM; + + /* Read registers */ + /* Note: DR and MPH must use the same clock setting in SCCR */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK; + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK; + sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI; + + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr"); + if (np) { + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + + prop = of_get_property(np, "phy_type", NULL); + port1_is_dr = 1; + if (prop && + (!strcmp(prop, "utmi") || !strcmp(prop, "utmi_wide"))) { + sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; + sicrh |= MPC834X_SICRH_USB_UTMI; + port0_is_dr = 1; + } else if (prop && !strcmp(prop, "serial")) { + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) { + sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; + port0_is_dr = 1; + } else { + sicrl |= MPC834X_SICRL_USB1; + } + } else if (prop && !strcmp(prop, "ulpi")) { + sicrl |= MPC834X_SICRL_USB1; + } else { + pr_warn("834x USB PHY type not supported\n"); + } + of_node_put(np); + } + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph"); + if (np) { + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + + prop = of_get_property(np, "port0", NULL); + if (prop) { + if (port0_is_dr) + pr_warn("834x USB port0 can't be used by both DR and MPH!\n"); + sicrl &= ~MPC834X_SICRL_USB0; + } + prop = of_get_property(np, "port1", NULL); + if (prop) { + if (port1_is_dr) + pr_warn("834x USB port1 can't be used by both DR and MPH!\n"); + sicrl &= ~MPC834X_SICRL_USB1; + } + of_node_put(np); + } + + /* Write back */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + out_be32(immap + MPC83XX_SICRH_OFFS, sicrh); + + iounmap(immap); + return 0; +} |