1 files changed, 106 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
new file mode 100644
index 000000000..757811155
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Routines common to most mpc85xx-based boards.
+ */
+
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/fsl_pm.h>
+#include <soc/fsl/qe/qe.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "mpc85xx.h"
+
+const struct fsl_pm_ops *qoriq_pm_ops;
+
+static const struct of_device_id mpc85xx_common_ids[] __initconst = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,qe", },
+	{ .compatible = "fsl,cpm2", },
+	{ .compatible = "fsl,srio", },
+	/* So that the DMA channel nodes can be probed individually: */
+	{ .compatible = "fsl,eloplus-dma", },
+	/* For the PMC driver */
+	{ .compatible = "fsl,mpc8548-guts", },
+	/* Probably unnecessary? */
+	{ .compatible = "gpio-leds", },
+	/* For all PCI controllers */
+	{ .compatible = "fsl,mpc8540-pci", },
+	{ .compatible = "fsl,mpc8548-pcie", },
+	{ .compatible = "fsl,p1022-pcie", },
+	{ .compatible = "fsl,p1010-pcie", },
+	{ .compatible = "fsl,p1023-pcie", },
+	{ .compatible = "fsl,p4080-pcie", },
+	{ .compatible = "fsl,qoriq-pcie-v2.4", },
+	{ .compatible = "fsl,qoriq-pcie-v2.3", },
+	{ .compatible = "fsl,qoriq-pcie-v2.2", },
+	{ .compatible = "fsl,fman", },
+	{},
+};
+
+int __init mpc85xx_common_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc85xx_common_ids, NULL);
+}
+#ifdef CONFIG_CPM2
+static void cpm2_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int cascade_irq;
+
+	while ((cascade_irq = cpm2_get_irq()) >= 0)
+		generic_handle_irq(cascade_irq);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+
+
+void __init mpc85xx_cpm2_pic_init(void)
+{
+	struct device_node *np;
+	int irq;
+
+	/* Setup CPM2 PIC */
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+		return;
+	}
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		of_node_put(np);
+		printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+	irq_set_chained_handler(irq, cpm2_cascade);
+}
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+void __init mpc85xx_qe_par_io_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_name(NULL, "par_io");
+	if (np) {
+		struct device_node *ucc;
+
+		par_io_init(np);
+		of_node_put(np);
+
+		for_each_node_by_name(ucc, "ucc")
+			par_io_of_config(ucc);
+
+	}
+}
+#endif