1 files changed, 94 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
new file mode 100644
index 000000000..c10efc458
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Based on MPC8560 ADS and arch/ppc stx_gp3 ports
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * Dan Malek <dan@embeddededge.com>
+ * Copyright 2004 Embedded Edge, LLC
+ *
+ * Copied from mpc8560_ads.c
+ * Copyright 2002, 2003 Motorola Inc.
+ *
+ * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc85xx.h"
+
+#ifdef CONFIG_CPM2
+#include <asm/cpm2.h>
+#endif /* CONFIG_CPM2 */
+
+static void __init stx_gp3_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+
+	mpc85xx_cpm2_pic_init();
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init stx_gp3_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("stx_gp3_setup_arch()", 0);
+
+	fsl_pci_assign_primary();
+
+#ifdef CONFIG_CPM2
+	cpm2_reset();
+#endif
+}
+
+static void stx_gp3_show_cpuinfo(struct seq_file *m)
+{
+	uint pvid, svid, phid1;
+
+	pvid = mfspr(SPRN_PVR);
+	svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: RPC Electronics STx\n");
+	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	/* Display cpu Pll setting */
+	phid1 = mfspr(SPRN_HID1);
+	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+}
+
+machine_arch_initcall(stx_gp3, mpc85xx_common_publish_devices);
+
+define_machine(stx_gp3) {
+	.name			= "STX GP3",
+	.compatible		= "stx,gp3-8560",
+	.setup_arch		= stx_gp3_setup_arch,
+	.init_IRQ		= stx_gp3_pic_init,
+	.show_cpuinfo		= stx_gp3_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.progress		= udbg_progress,
+};