1 files changed, 456 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
new file mode 100644
index 000000000..ef985ba2b
--- /dev/null
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Authors: Kip Walker, PA Semi
+ *	    Olof Johansson, PA Semi
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on arch/powerpc/platforms/maple/setup.c
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/gfp.h>
+#include <linux/irqdomain.h>
+
+#include <asm/iommu.h>
+#include <asm/machdep.h>
+#include <asm/i8259.h>
+#include <asm/mpic.h>
+#include <asm/smp.h>
+#include <asm/time.h>
+#include <asm/mmu.h>
+#include <asm/debug.h>
+
+#include <pcmcia/ss.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#include "pasemi.h"
+
+/* SDC reset register, must be pre-mapped at reset time */
+static void __iomem *reset_reg;
+
+/* Various error status registers, must be pre-mapped at MCE time */
+
+#define MAX_MCE_REGS	32
+struct mce_regs {
+	char *name;
+	void __iomem *addr;
+};
+
+static struct mce_regs mce_regs[MAX_MCE_REGS];
+static int num_mce_regs;
+static int nmi_virq = 0;
+
+
+static void __noreturn pas_restart(char *cmd)
+{
+	/* Need to put others cpu in hold loop so they're not sleeping */
+	smp_send_stop();
+	udelay(10000);
+	printk("Restarting...\n");
+	while (1)
+		out_le32(reset_reg, 0x6000000);
+}
+
+#ifdef CONFIG_PPC_PASEMI_NEMO
+void pas_shutdown(void)
+{
+	/* Set the PLD bit that makes the SB600 think the power button is being pressed */
+	void __iomem *pld_map = ioremap(0xf5000000,4096);
+	while (1)
+		out_8(pld_map+7,0x01);
+}
+
+/* RTC platform device structure as is not in device tree */
+static struct resource rtc_resource[] = {{
+	.name = "rtc",
+	.start = 0x70,
+	.end = 0x71,
+	.flags = IORESOURCE_IO,
+}, {
+	.name = "rtc",
+	.start = 8,
+	.end = 8,
+	.flags = IORESOURCE_IRQ,
+}};
+
+static inline void nemo_init_rtc(void)
+{
+	platform_device_register_simple("rtc_cmos", -1, rtc_resource, 2);
+}
+
+#else
+
+static inline void nemo_init_rtc(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SMP
+static arch_spinlock_t timebase_lock;
+static unsigned long timebase;
+
+static void pas_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	hard_irq_disable();
+	arch_spin_lock(&timebase_lock);
+	mtspr(SPRN_TBCTL, TBCTL_FREEZE);
+	isync();
+	timebase = get_tb();
+	arch_spin_unlock(&timebase_lock);
+
+	while (timebase)
+		barrier();
+	mtspr(SPRN_TBCTL, TBCTL_RESTART);
+	local_irq_restore(flags);
+}
+
+static void pas_take_timebase(void)
+{
+	while (!timebase)
+		smp_rmb();
+
+	arch_spin_lock(&timebase_lock);
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	arch_spin_unlock(&timebase_lock);
+}
+
+static struct smp_ops_t pas_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.kick_cpu	= smp_generic_kick_cpu,
+	.setup_cpu	= smp_mpic_setup_cpu,
+	.give_timebase	= pas_give_timebase,
+	.take_timebase	= pas_take_timebase,
+};
+#endif /* CONFIG_SMP */
+
+static void __init pas_setup_arch(void)
+{
+#ifdef CONFIG_SMP
+	/* Setup SMP callback */
+	smp_ops = &pas_smp_ops;
+#endif
+
+	/* Remap SDC register for doing reset */
+	/* XXXOJN This should maybe come out of the device tree */
+	reset_reg = ioremap(0xfc101100, 4);
+}
+
+static int __init pas_setup_mce_regs(void)
+{
+	struct pci_dev *dev;
+	int reg;
+
+	/* Remap various SoC status registers for use by the MCE handler */
+
+	reg = 0;
+
+	dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL);
+	while (dev && reg < MAX_MCE_REGS) {
+		mce_regs[reg].name = kasprintf(GFP_KERNEL,
+						"mc%d_mcdebug_errsta", reg);
+		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730);
+		dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev);
+		reg++;
+	}
+
+	dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
+	if (dev && reg+4 < MAX_MCE_REGS) {
+		mce_regs[reg].name = "iobdbg_IntStatus1";
+		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438);
+		reg++;
+		mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg";
+		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454);
+		reg++;
+		mce_regs[reg].name = "iobiom_IntStatus";
+		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10);
+		reg++;
+		mce_regs[reg].name = "iobiom_IntDbgReg";
+		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c);
+		reg++;
+	}
+
+	dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL);
+	if (dev && reg+2 < MAX_MCE_REGS) {
+		mce_regs[reg].name = "l2csts_IntStatus";
+		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200);
+		reg++;
+		mce_regs[reg].name = "l2csts_Cnt";
+		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214);
+		reg++;
+	}
+
+	num_mce_regs = reg;
+
+	return 0;
+}
+machine_device_initcall(pasemi, pas_setup_mce_regs);
+
+#ifdef CONFIG_PPC_PASEMI_NEMO
+static void sb600_8259_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned int cascade_irq = i8259_irq();
+
+	if (cascade_irq)
+		generic_handle_irq(cascade_irq);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+
+static void __init nemo_init_IRQ(struct mpic *mpic)
+{
+	struct device_node *np;
+	int gpio_virq;
+	/* Connect the SB600's legacy i8259 controller */
+	np = of_find_node_by_path("/pxp@0,e0000000");
+	i8259_init(np, 0);
+	of_node_put(np);
+
+	gpio_virq = irq_create_mapping(NULL, 3);
+	irq_set_irq_type(gpio_virq, IRQ_TYPE_LEVEL_HIGH);
+	irq_set_chained_handler(gpio_virq, sb600_8259_cascade);
+	mpic_unmask_irq(irq_get_irq_data(gpio_virq));
+
+	irq_set_default_host(mpic->irqhost);
+}
+
+#else
+
+static inline void nemo_init_IRQ(struct mpic *mpic)
+{
+}
+#endif
+
+static __init void pas_init_IRQ(void)
+{
+	struct device_node *np;
+	struct device_node *root, *mpic_node;
+	unsigned long openpic_addr;
+	const unsigned int *opprop;
+	int naddr, opplen;
+	int mpic_flags;
+	const unsigned int *nmiprop;
+	struct mpic *mpic;
+
+	mpic_node = NULL;
+
+	for_each_node_by_type(np, "interrupt-controller")
+		if (of_device_is_compatible(np, "open-pic")) {
+			mpic_node = np;
+			break;
+		}
+	if (!mpic_node)
+		for_each_node_by_type(np, "open-pic") {
+			mpic_node = np;
+			break;
+		}
+	if (!mpic_node) {
+		pr_err("Failed to locate the MPIC interrupt controller\n");
+		return;
+	}
+
+	/* Find address list in /platform-open-pic */
+	root = of_find_node_by_path("/");
+	naddr = of_n_addr_cells(root);
+	opprop = of_get_property(root, "platform-open-pic", &opplen);
+	if (!opprop) {
+		pr_err("No platform-open-pic property.\n");
+		of_node_put(root);
+		return;
+	}
+	openpic_addr = of_read_number(opprop, naddr);
+	pr_debug("OpenPIC addr: %lx\n", openpic_addr);
+
+	mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET;
+
+	nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
+	if (nmiprop)
+		mpic_flags |= MPIC_ENABLE_MCK;
+
+	mpic = mpic_alloc(mpic_node, openpic_addr,
+			  mpic_flags, 0, 0, "PASEMI-OPIC");
+	BUG_ON(!mpic);
+
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000);
+	mpic_init(mpic);
+	/* The NMI/MCK source needs to be prio 15 */
+	if (nmiprop) {
+		nmi_virq = irq_create_mapping(NULL, *nmiprop);
+		mpic_irq_set_priority(nmi_virq, 15);
+		irq_set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING);
+		mpic_unmask_irq(irq_get_irq_data(nmi_virq));
+	}
+
+	nemo_init_IRQ(mpic);
+
+	of_node_put(mpic_node);
+	of_node_put(root);
+}
+
+static void __init pas_progress(char *s, unsigned short hex)
+{
+	printk("[%04x] : %s\n", hex, s ? s : "");
+}
+
+
+static int pas_machine_check_handler(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	unsigned long srr0, srr1, dsisr;
+	int dump_slb = 0;
+	int i;
+
+	srr0 = regs->nip;
+	srr1 = regs->msr;
+
+	if (nmi_virq && mpic_get_mcirq() == nmi_virq) {
+		pr_err("NMI delivered\n");
+		debugger(regs);
+		mpic_end_irq(irq_get_irq_data(nmi_virq));
+		goto out;
+	}
+
+	dsisr = mfspr(SPRN_DSISR);
+	pr_err("Machine Check on CPU %d\n", cpu);
+	pr_err("SRR0  0x%016lx SRR1 0x%016lx\n", srr0, srr1);
+	pr_err("DSISR 0x%016lx DAR  0x%016lx\n", dsisr, regs->dar);
+	pr_err("BER   0x%016lx MER  0x%016lx\n", mfspr(SPRN_PA6T_BER),
+		mfspr(SPRN_PA6T_MER));
+	pr_err("IER   0x%016lx DER  0x%016lx\n", mfspr(SPRN_PA6T_IER),
+		mfspr(SPRN_PA6T_DER));
+	pr_err("Cause:\n");
+
+	if (srr1 & 0x200000)
+		pr_err("Signalled by SDC\n");
+
+	if (srr1 & 0x100000) {
+		pr_err("Load/Store detected error:\n");
+		if (dsisr & 0x8000)
+			pr_err("D-cache ECC double-bit error or bus error\n");
+		if (dsisr & 0x4000)
+			pr_err("LSU snoop response error\n");
+		if (dsisr & 0x2000) {
+			pr_err("MMU SLB multi-hit or invalid B field\n");
+			dump_slb = 1;
+		}
+		if (dsisr & 0x1000)
+			pr_err("Recoverable Duptags\n");
+		if (dsisr & 0x800)
+			pr_err("Recoverable D-cache parity error count overflow\n");
+		if (dsisr & 0x400)
+			pr_err("TLB parity error count overflow\n");
+	}
+
+	if (srr1 & 0x80000)
+		pr_err("Bus Error\n");
+
+	if (srr1 & 0x40000) {
+		pr_err("I-side SLB multiple hit\n");
+		dump_slb = 1;
+	}
+
+	if (srr1 & 0x20000)
+		pr_err("I-cache parity error hit\n");
+
+	if (num_mce_regs == 0)
+		pr_err("No MCE registers mapped yet, can't dump\n");
+	else
+		pr_err("SoC debug registers:\n");
+
+	for (i = 0; i < num_mce_regs; i++)
+		pr_err("%s: 0x%08x\n", mce_regs[i].name,
+			in_le32(mce_regs[i].addr));
+
+	if (dump_slb) {
+		unsigned long e, v;
+		int i;
+
+		pr_err("slb contents:\n");
+		for (i = 0; i < mmu_slb_size; i++) {
+			asm volatile("slbmfee  %0,%1" : "=r" (e) : "r" (i));
+			asm volatile("slbmfev  %0,%1" : "=r" (v) : "r" (i));
+			pr_err("%02d %016lx %016lx\n", i, e, v);
+		}
+	}
+
+out:
+	/* SRR1[62] is from MSR[62] if recoverable, so pass that back */
+	return !!(srr1 & 0x2);
+}
+
+static const struct of_device_id pasemi_bus_ids[] = {
+	/* Unfortunately needed for legacy firmwares */
+	{ .type = "localbus", },
+	{ .type = "sdc", },
+	/* These are the proper entries, which newer firmware uses */
+	{ .compatible = "pasemi,localbus", },
+	{ .compatible = "pasemi,sdc", },
+	{},
+};
+
+static int __init pasemi_publish_devices(void)
+{
+	/* Publish OF platform devices for SDC and other non-PCI devices */
+	of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
+
+	nemo_init_rtc();
+
+	return 0;
+}
+machine_device_initcall(pasemi, pasemi_publish_devices);
+
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init pas_probe(void)
+{
+	if (!of_machine_is_compatible("PA6T-1682M") &&
+	    !of_machine_is_compatible("pasemi,pwrficient"))
+		return 0;
+
+#ifdef CONFIG_PPC_PASEMI_NEMO
+	/*
+	 * Check for the Nemo motherboard here, if we are running on one
+	 * change the machine definition to fit
+	 */
+	if (of_machine_is_compatible("pasemi,nemo")) {
+		pm_power_off		= pas_shutdown;
+		ppc_md.name		= "A-EON Amigaone X1000";
+	}
+#endif
+
+	iommu_init_early_pasemi();
+
+	return 1;
+}
+
+define_machine(pasemi) {
+	.name			= "PA Semi PWRficient",
+	.probe			= pas_probe,
+	.setup_arch		= pas_setup_arch,
+	.discover_phbs		= pas_pci_init,
+	.init_IRQ		= pas_init_IRQ,
+	.get_irq		= mpic_get_irq,
+	.restart		= pas_restart,
+	.get_boot_time		= pas_get_boot_time,
+	.progress		= pas_progress,
+	.machine_check_exception = pas_machine_check_handler,
+};