diff options
Diffstat (limited to 'arch/powerpc/platforms/powernv/opal.c')
| -rw-r--r-- | arch/powerpc/platforms/powernv/opal.c | 1251 |
1 files changed, 1251 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c new file mode 100644 index 000000000..cdf3838f0 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal.c @@ -0,0 +1,1251 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * PowerNV OPAL high level interfaces + * + * Copyright 2011 IBM Corp. + */ + +#define pr_fmt(fmt) "opal: " fmt + +#include <linux/printk.h> +#include <linux/types.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/interrupt.h> +#include <linux/notifier.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/kobject.h> +#include <linux/delay.h> +#include <linux/memblock.h> +#include <linux/kthread.h> +#include <linux/freezer.h> +#include <linux/kmsg_dump.h> +#include <linux/console.h> +#include <linux/sched/debug.h> + +#include <asm/machdep.h> +#include <asm/opal.h> +#include <asm/firmware.h> +#include <asm/mce.h> +#include <asm/imc-pmu.h> +#include <asm/bug.h> + +#include "powernv.h" + +#define OPAL_MSG_QUEUE_MAX 16 + +struct opal_msg_node { + struct list_head list; + struct opal_msg msg; +}; + +static DEFINE_SPINLOCK(msg_list_lock); +static LIST_HEAD(msg_list); + +/* /sys/firmware/opal */ +struct kobject *opal_kobj; + +struct opal { + u64 base; + u64 entry; + u64 size; +} opal; + +struct mcheck_recoverable_range { + u64 start_addr; + u64 end_addr; + u64 recover_addr; +}; + +static int msg_list_size; + +static struct mcheck_recoverable_range *mc_recoverable_range; +static int mc_recoverable_range_len; + +struct device_node *opal_node; +static DEFINE_SPINLOCK(opal_write_lock); +static struct atomic_notifier_head opal_msg_notifier_head[OPAL_MSG_TYPE_MAX]; +static uint32_t opal_heartbeat; +static struct task_struct *kopald_tsk; +static struct opal_msg *opal_msg; +static u32 opal_msg_size __ro_after_init; + +void __init opal_configure_cores(void) +{ + u64 reinit_flags = 0; + + /* Do the actual re-init, This will clobber all FPRs, VRs, etc... + * + * It will preserve non volatile GPRs and HSPRG0/1. It will + * also restore HIDs and other SPRs to their original value + * but it might clobber a bunch. + */ +#ifdef __BIG_ENDIAN__ + reinit_flags |= OPAL_REINIT_CPUS_HILE_BE; +#else + reinit_flags |= OPAL_REINIT_CPUS_HILE_LE; +#endif + + /* + * POWER9 always support running hash: + * ie. Host hash supports hash guests + * Host radix supports hash/radix guests + */ + if (early_cpu_has_feature(CPU_FTR_ARCH_300)) { + reinit_flags |= OPAL_REINIT_CPUS_MMU_HASH; + if (early_radix_enabled()) + reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX; + } + + opal_reinit_cpus(reinit_flags); + + /* Restore some bits */ + if (cur_cpu_spec->cpu_restore) + cur_cpu_spec->cpu_restore(); +} + +int __init early_init_dt_scan_opal(unsigned long node, + const char *uname, int depth, void *data) +{ + const void *basep, *entryp, *sizep; + int basesz, entrysz, runtimesz; + + if (depth != 1 || strcmp(uname, "ibm,opal") != 0) + return 0; + + basep = of_get_flat_dt_prop(node, "opal-base-address", &basesz); + entryp = of_get_flat_dt_prop(node, "opal-entry-address", &entrysz); + sizep = of_get_flat_dt_prop(node, "opal-runtime-size", &runtimesz); + + if (!basep || !entryp || !sizep) + return 1; + + opal.base = of_read_number(basep, basesz/4); + opal.entry = of_read_number(entryp, entrysz/4); + opal.size = of_read_number(sizep, runtimesz/4); + + pr_debug("OPAL Base = 0x%llx (basep=%p basesz=%d)\n", + opal.base, basep, basesz); + pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%d)\n", + opal.entry, entryp, entrysz); + pr_debug("OPAL Entry = 0x%llx (sizep=%p runtimesz=%d)\n", + opal.size, sizep, runtimesz); + + if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) { + powerpc_firmware_features |= FW_FEATURE_OPAL; + pr_debug("OPAL detected !\n"); + } else { + panic("OPAL != V3 detected, no longer supported.\n"); + } + + return 1; +} + +int __init early_init_dt_scan_recoverable_ranges(unsigned long node, + const char *uname, int depth, void *data) +{ + int i, psize, size; + const __be32 *prop; + + if (depth != 1 || strcmp(uname, "ibm,opal") != 0) + return 0; + + prop = of_get_flat_dt_prop(node, "mcheck-recoverable-ranges", &psize); + + if (!prop) + return 1; + + pr_debug("Found machine check recoverable ranges.\n"); + + /* + * Calculate number of available entries. + * + * Each recoverable address range entry is (start address, len, + * recovery address), 2 cells each for start and recovery address, + * 1 cell for len, totalling 5 cells per entry. + */ + mc_recoverable_range_len = psize / (sizeof(*prop) * 5); + + /* Sanity check */ + if (!mc_recoverable_range_len) + return 1; + + /* Size required to hold all the entries. */ + size = mc_recoverable_range_len * + sizeof(struct mcheck_recoverable_range); + + /* + * Allocate a buffer to hold the MC recoverable ranges. + */ + mc_recoverable_range = memblock_alloc(size, __alignof__(u64)); + if (!mc_recoverable_range) + panic("%s: Failed to allocate %u bytes align=0x%lx\n", + __func__, size, __alignof__(u64)); + + for (i = 0; i < mc_recoverable_range_len; i++) { + mc_recoverable_range[i].start_addr = + of_read_number(prop + (i * 5) + 0, 2); + mc_recoverable_range[i].end_addr = + mc_recoverable_range[i].start_addr + + of_read_number(prop + (i * 5) + 2, 1); + mc_recoverable_range[i].recover_addr = + of_read_number(prop + (i * 5) + 3, 2); + + pr_debug("Machine check recoverable range: %llx..%llx: %llx\n", + mc_recoverable_range[i].start_addr, + mc_recoverable_range[i].end_addr, + mc_recoverable_range[i].recover_addr); + } + return 1; +} + +static int __init opal_register_exception_handlers(void) +{ +#ifdef __BIG_ENDIAN__ + u64 glue; + + if (!(powerpc_firmware_features & FW_FEATURE_OPAL)) + return -ENODEV; + + /* Hookup some exception handlers except machine check. We use the + * fwnmi area at 0x7000 to provide the glue space to OPAL + */ + glue = 0x7000; + + /* + * Only ancient OPAL firmware requires this. + * Specifically, firmware from FW810.00 (released June 2014) + * through FW810.20 (Released October 2014). + * + * Check if we are running on newer (post Oct 2014) firmware that + * exports the OPAL_HANDLE_HMI token. If yes, then don't ask OPAL to + * patch the HMI interrupt and we catch it directly in Linux. + * + * For older firmware (i.e < FW810.20), we fallback to old behavior and + * let OPAL patch the HMI vector and handle it inside OPAL firmware. + * + * For newer firmware we catch/handle the HMI directly in Linux. + */ + if (!opal_check_token(OPAL_HANDLE_HMI)) { + pr_info("Old firmware detected, OPAL handles HMIs.\n"); + opal_register_exception_handler( + OPAL_HYPERVISOR_MAINTENANCE_HANDLER, + 0, glue); + glue += 128; + } + + /* + * Only applicable to ancient firmware, all modern + * (post March 2015/skiboot 5.0) firmware will just return + * OPAL_UNSUPPORTED. + */ + opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue); +#endif + + return 0; +} +machine_early_initcall(powernv, opal_register_exception_handlers); + +static void queue_replay_msg(void *msg) +{ + struct opal_msg_node *msg_node; + + if (msg_list_size < OPAL_MSG_QUEUE_MAX) { + msg_node = kzalloc(sizeof(*msg_node), GFP_ATOMIC); + if (msg_node) { + INIT_LIST_HEAD(&msg_node->list); + memcpy(&msg_node->msg, msg, sizeof(struct opal_msg)); + list_add_tail(&msg_node->list, &msg_list); + msg_list_size++; + } else + pr_warn_once("message queue no memory\n"); + + if (msg_list_size >= OPAL_MSG_QUEUE_MAX) + pr_warn_once("message queue full\n"); + } +} + +static void dequeue_replay_msg(enum opal_msg_type msg_type) +{ + struct opal_msg_node *msg_node, *tmp; + + list_for_each_entry_safe(msg_node, tmp, &msg_list, list) { + if (be32_to_cpu(msg_node->msg.msg_type) != msg_type) + continue; + + atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type], + msg_type, + &msg_node->msg); + + list_del(&msg_node->list); + kfree(msg_node); + msg_list_size--; + } +} + +/* + * Opal message notifier based on message type. Allow subscribers to get + * notified for specific messgae type. + */ +int opal_message_notifier_register(enum opal_msg_type msg_type, + struct notifier_block *nb) +{ + int ret; + unsigned long flags; + + if (!nb || msg_type >= OPAL_MSG_TYPE_MAX) { + pr_warn("%s: Invalid arguments, msg_type:%d\n", + __func__, msg_type); + return -EINVAL; + } + + spin_lock_irqsave(&msg_list_lock, flags); + ret = atomic_notifier_chain_register( + &opal_msg_notifier_head[msg_type], nb); + + /* + * If the registration succeeded, replay any queued messages that came + * in prior to the notifier chain registration. msg_list_lock held here + * to ensure they're delivered prior to any subsequent messages. + */ + if (ret == 0) + dequeue_replay_msg(msg_type); + + spin_unlock_irqrestore(&msg_list_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(opal_message_notifier_register); + +int opal_message_notifier_unregister(enum opal_msg_type msg_type, + struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister( + &opal_msg_notifier_head[msg_type], nb); +} +EXPORT_SYMBOL_GPL(opal_message_notifier_unregister); + +static void opal_message_do_notify(uint32_t msg_type, void *msg) +{ + unsigned long flags; + bool queued = false; + + spin_lock_irqsave(&msg_list_lock, flags); + if (opal_msg_notifier_head[msg_type].head == NULL) { + /* + * Queue up the msg since no notifiers have registered + * yet for this msg_type. + */ + queue_replay_msg(msg); + queued = true; + } + spin_unlock_irqrestore(&msg_list_lock, flags); + + if (queued) + return; + + /* notify subscribers */ + atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type], + msg_type, msg); +} + +static void opal_handle_message(void) +{ + s64 ret; + u32 type; + + ret = opal_get_msg(__pa(opal_msg), opal_msg_size); + /* No opal message pending. */ + if (ret == OPAL_RESOURCE) + return; + + /* check for errors. */ + if (ret) { + pr_warn("%s: Failed to retrieve opal message, err=%lld\n", + __func__, ret); + return; + } + + type = be32_to_cpu(opal_msg->msg_type); + + /* Sanity check */ + if (type >= OPAL_MSG_TYPE_MAX) { + pr_warn_once("%s: Unknown message type: %u\n", __func__, type); + return; + } + opal_message_do_notify(type, (void *)opal_msg); +} + +static irqreturn_t opal_message_notify(int irq, void *data) +{ + opal_handle_message(); + return IRQ_HANDLED; +} + +static int __init opal_message_init(struct device_node *opal_node) +{ + int ret, i, irq; + + ret = of_property_read_u32(opal_node, "opal-msg-size", &opal_msg_size); + if (ret) { + pr_notice("Failed to read opal-msg-size property\n"); + opal_msg_size = sizeof(struct opal_msg); + } + + opal_msg = kmalloc(opal_msg_size, GFP_KERNEL); + if (!opal_msg) { + opal_msg_size = sizeof(struct opal_msg); + /* Try to allocate fixed message size */ + opal_msg = kmalloc(opal_msg_size, GFP_KERNEL); + BUG_ON(opal_msg == NULL); + } + + for (i = 0; i < OPAL_MSG_TYPE_MAX; i++) + ATOMIC_INIT_NOTIFIER_HEAD(&opal_msg_notifier_head[i]); + + irq = opal_event_request(ilog2(OPAL_EVENT_MSG_PENDING)); + if (!irq) { + pr_err("%s: Can't register OPAL event irq (%d)\n", + __func__, irq); + return irq; + } + + ret = request_irq(irq, opal_message_notify, + IRQ_TYPE_LEVEL_HIGH, "opal-msg", NULL); + if (ret) { + pr_err("%s: Can't request OPAL event irq (%d)\n", + __func__, ret); + return ret; + } + + return 0; +} + +int opal_get_chars(uint32_t vtermno, char *buf, int count) +{ + s64 rc; + __be64 evt, len; + + if (!opal.entry) + return -ENODEV; + opal_poll_events(&evt); + if ((be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_INPUT) == 0) + return 0; + len = cpu_to_be64(count); + rc = opal_console_read(vtermno, &len, buf); + if (rc == OPAL_SUCCESS) + return be64_to_cpu(len); + return 0; +} + +static int __opal_put_chars(uint32_t vtermno, const char *data, int total_len, bool atomic) +{ + unsigned long flags = 0 /* shut up gcc */; + int written; + __be64 olen; + s64 rc; + + if (!opal.entry) + return -ENODEV; + + if (atomic) + spin_lock_irqsave(&opal_write_lock, flags); + rc = opal_console_write_buffer_space(vtermno, &olen); + if (rc || be64_to_cpu(olen) < total_len) { + /* Closed -> drop characters */ + if (rc) + written = total_len; + else + written = -EAGAIN; + goto out; + } + + /* Should not get a partial write here because space is available. */ + olen = cpu_to_be64(total_len); + rc = opal_console_write(vtermno, &olen, data); + if (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + if (rc == OPAL_BUSY_EVENT) + opal_poll_events(NULL); + written = -EAGAIN; + goto out; + } + + /* Closed or other error drop */ + if (rc != OPAL_SUCCESS) { + written = opal_error_code(rc); + goto out; + } + + written = be64_to_cpu(olen); + if (written < total_len) { + if (atomic) { + /* Should not happen */ + pr_warn("atomic console write returned partial " + "len=%d written=%d\n", total_len, written); + } + if (!written) + written = -EAGAIN; + } + +out: + if (atomic) + spin_unlock_irqrestore(&opal_write_lock, flags); + + return written; +} + +int opal_put_chars(uint32_t vtermno, const char *data, int total_len) +{ + return __opal_put_chars(vtermno, data, total_len, false); +} + +/* + * opal_put_chars_atomic will not perform partial-writes. Data will be + * atomically written to the terminal or not at all. This is not strictly + * true at the moment because console space can race with OPAL's console + * writes. + */ +int opal_put_chars_atomic(uint32_t vtermno, const char *data, int total_len) +{ + return __opal_put_chars(vtermno, data, total_len, true); +} + +static s64 __opal_flush_console(uint32_t vtermno) +{ + s64 rc; + + if (!opal_check_token(OPAL_CONSOLE_FLUSH)) { + __be64 evt; + + /* + * If OPAL_CONSOLE_FLUSH is not implemented in the firmware, + * the console can still be flushed by calling the polling + * function while it has OPAL_EVENT_CONSOLE_OUTPUT events. + */ + WARN_ONCE(1, "opal: OPAL_CONSOLE_FLUSH missing.\n"); + + opal_poll_events(&evt); + if (!(be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_OUTPUT)) + return OPAL_SUCCESS; + return OPAL_BUSY; + + } else { + rc = opal_console_flush(vtermno); + if (rc == OPAL_BUSY_EVENT) { + opal_poll_events(NULL); + rc = OPAL_BUSY; + } + return rc; + } + +} + +/* + * opal_flush_console spins until the console is flushed + */ +int opal_flush_console(uint32_t vtermno) +{ + for (;;) { + s64 rc = __opal_flush_console(vtermno); + + if (rc == OPAL_BUSY || rc == OPAL_PARTIAL) { + mdelay(1); + continue; + } + + return opal_error_code(rc); + } +} + +/* + * opal_flush_chars is an hvc interface that sleeps until the console is + * flushed if wait, otherwise it will return -EBUSY if the console has data, + * -EAGAIN if it has data and some of it was flushed. + */ +int opal_flush_chars(uint32_t vtermno, bool wait) +{ + for (;;) { + s64 rc = __opal_flush_console(vtermno); + + if (rc == OPAL_BUSY || rc == OPAL_PARTIAL) { + if (wait) { + msleep(OPAL_BUSY_DELAY_MS); + continue; + } + if (rc == OPAL_PARTIAL) + return -EAGAIN; + } + + return opal_error_code(rc); + } +} + +static int opal_recover_mce(struct pt_regs *regs, + struct machine_check_event *evt) +{ + int recovered = 0; + + if (regs_is_unrecoverable(regs)) { + /* If MSR_RI isn't set, we cannot recover */ + pr_err("Machine check interrupt unrecoverable: MSR(RI=0)\n"); + recovered = 0; + } else if (evt->disposition == MCE_DISPOSITION_RECOVERED) { + /* Platform corrected itself */ + recovered = 1; + } else if (evt->severity == MCE_SEV_FATAL) { + /* Fatal machine check */ + pr_err("Machine check interrupt is fatal\n"); + recovered = 0; + } + + if (!recovered && evt->sync_error) { + /* + * Try to kill processes if we get a synchronous machine check + * (e.g., one caused by execution of this instruction). This + * will devolve into a panic if we try to kill init or are in + * an interrupt etc. + * + * TODO: Queue up this address for hwpoisioning later. + * TODO: This is not quite right for d-side machine + * checks ->nip is not necessarily the important + * address. + */ + if ((user_mode(regs))) { + _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip); + recovered = 1; + } else if (die_will_crash()) { + /* + * die() would kill the kernel, so better to go via + * the platform reboot code that will log the + * machine check. + */ + recovered = 0; + } else { + die_mce("Machine check", regs, SIGBUS); + recovered = 1; + } + } + + return recovered; +} + +void __noreturn pnv_platform_error_reboot(struct pt_regs *regs, const char *msg) +{ + panic_flush_kmsg_start(); + + pr_emerg("Hardware platform error: %s\n", msg); + if (regs) + show_regs(regs); + smp_send_stop(); + + panic_flush_kmsg_end(); + + /* + * Don't bother to shut things down because this will + * xstop the system. + */ + if (opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR, msg) + == OPAL_UNSUPPORTED) { + pr_emerg("Reboot type %d not supported for %s\n", + OPAL_REBOOT_PLATFORM_ERROR, msg); + } + + /* + * We reached here. There can be three possibilities: + * 1. We are running on a firmware level that do not support + * opal_cec_reboot2() + * 2. We are running on a firmware level that do not support + * OPAL_REBOOT_PLATFORM_ERROR reboot type. + * 3. We are running on FSP based system that does not need + * opal to trigger checkstop explicitly for error analysis. + * The FSP PRD component would have already got notified + * about this error through other channels. + * 4. We are running on a newer skiboot that by default does + * not cause a checkstop, drops us back to the kernel to + * extract context and state at the time of the error. + */ + + panic(msg); +} + +int opal_machine_check(struct pt_regs *regs) +{ + struct machine_check_event evt; + + if (!get_mce_event(&evt, MCE_EVENT_RELEASE)) + return 0; + + /* Print things out */ + if (evt.version != MCE_V1) { + pr_err("Machine Check Exception, Unknown event version %d !\n", + evt.version); + return 0; + } + machine_check_print_event_info(&evt, user_mode(regs), false); + + if (opal_recover_mce(regs, &evt)) + return 1; + + pnv_platform_error_reboot(regs, "Unrecoverable Machine Check exception"); +} + +/* Early hmi handler called in real mode. */ +int opal_hmi_exception_early(struct pt_regs *regs) +{ + s64 rc; + + /* + * call opal hmi handler. Pass paca address as token. + * The return value OPAL_SUCCESS is an indication that there is + * an HMI event generated waiting to pull by Linux. + */ + rc = opal_handle_hmi(); + if (rc == OPAL_SUCCESS) { + local_paca->hmi_event_available = 1; + return 1; + } + return 0; +} + +int opal_hmi_exception_early2(struct pt_regs *regs) +{ + s64 rc; + __be64 out_flags; + + /* + * call opal hmi handler. + * Check 64-bit flag mask to find out if an event was generated, + * and whether TB is still valid or not etc. + */ + rc = opal_handle_hmi2(&out_flags); + if (rc != OPAL_SUCCESS) + return 0; + + if (be64_to_cpu(out_flags) & OPAL_HMI_FLAGS_NEW_EVENT) + local_paca->hmi_event_available = 1; + if (be64_to_cpu(out_flags) & OPAL_HMI_FLAGS_TOD_TB_FAIL) + tb_invalid = true; + return 1; +} + +/* HMI exception handler called in virtual mode when irqs are next enabled. */ +int opal_handle_hmi_exception(struct pt_regs *regs) +{ + /* + * Check if HMI event is available. + * if Yes, then wake kopald to process them. + */ + if (!local_paca->hmi_event_available) + return 0; + + local_paca->hmi_event_available = 0; + opal_wake_poller(); + + return 1; +} + +static uint64_t find_recovery_address(uint64_t nip) +{ + int i; + + for (i = 0; i < mc_recoverable_range_len; i++) + if ((nip >= mc_recoverable_range[i].start_addr) && + (nip < mc_recoverable_range[i].end_addr)) + return mc_recoverable_range[i].recover_addr; + return 0; +} + +bool opal_mce_check_early_recovery(struct pt_regs *regs) +{ + uint64_t recover_addr = 0; + + if (!opal.base || !opal.size) + goto out; + + if ((regs->nip >= opal.base) && + (regs->nip < (opal.base + opal.size))) + recover_addr = find_recovery_address(regs->nip); + + /* + * Setup regs->nip to rfi into fixup address. + */ + if (recover_addr) + regs_set_return_ip(regs, recover_addr); + +out: + return !!recover_addr; +} + +static int __init opal_sysfs_init(void) +{ + opal_kobj = kobject_create_and_add("opal", firmware_kobj); + if (!opal_kobj) { + pr_warn("kobject_create_and_add opal failed\n"); + return -ENOMEM; + } + + return 0; +} + +static ssize_t export_attr_read(struct file *fp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + return memory_read_from_buffer(buf, count, &off, bin_attr->private, + bin_attr->size); +} + +static int opal_add_one_export(struct kobject *parent, const char *export_name, + struct device_node *np, const char *prop_name) +{ + struct bin_attribute *attr = NULL; + const char *name = NULL; + u64 vals[2]; + int rc; + + rc = of_property_read_u64_array(np, prop_name, &vals[0], 2); + if (rc) + goto out; + + attr = kzalloc(sizeof(*attr), GFP_KERNEL); + if (!attr) { + rc = -ENOMEM; + goto out; + } + name = kstrdup(export_name, GFP_KERNEL); + if (!name) { + rc = -ENOMEM; + goto out; + } + + sysfs_bin_attr_init(attr); + attr->attr.name = name; + attr->attr.mode = 0400; + attr->read = export_attr_read; + attr->private = __va(vals[0]); + attr->size = vals[1]; + + rc = sysfs_create_bin_file(parent, attr); +out: + if (rc) { + kfree(name); + kfree(attr); + } + + return rc; +} + +static void opal_add_exported_attrs(struct device_node *np, + struct kobject *kobj) +{ + struct device_node *child; + struct property *prop; + + for_each_property_of_node(np, prop) { + int rc; + + if (!strcmp(prop->name, "name") || + !strcmp(prop->name, "phandle")) + continue; + + rc = opal_add_one_export(kobj, prop->name, np, prop->name); + if (rc) { + pr_warn("Unable to add export %pOF/%s, rc = %d!\n", + np, prop->name, rc); + } + } + + for_each_child_of_node(np, child) { + struct kobject *child_kobj; + + child_kobj = kobject_create_and_add(child->name, kobj); + if (!child_kobj) { + pr_err("Unable to create export dir for %pOF\n", child); + continue; + } + + opal_add_exported_attrs(child, child_kobj); + } +} + +/* + * opal_export_attrs: creates a sysfs node for each property listed in + * the device-tree under /ibm,opal/firmware/exports/ + * All new sysfs nodes are created under /opal/exports/. + * This allows for reserved memory regions (e.g. HDAT) to be read. + * The new sysfs nodes are only readable by root. + */ +static void opal_export_attrs(void) +{ + struct device_node *np; + struct kobject *kobj; + int rc; + + np = of_find_node_by_path("/ibm,opal/firmware/exports"); + if (!np) + return; + + /* Create new 'exports' directory - /sys/firmware/opal/exports */ + kobj = kobject_create_and_add("exports", opal_kobj); + if (!kobj) { + pr_warn("kobject_create_and_add() of exports failed\n"); + of_node_put(np); + return; + } + + opal_add_exported_attrs(np, kobj); + + /* + * NB: symbol_map existed before the generic export interface so it + * lives under the top level opal_kobj. + */ + rc = opal_add_one_export(opal_kobj, "symbol_map", + np->parent, "symbol-map"); + if (rc) + pr_warn("Error %d creating OPAL symbols file\n", rc); + + of_node_put(np); +} + +static void __init opal_dump_region_init(void) +{ + void *addr; + uint64_t size; + int rc; + + if (!opal_check_token(OPAL_REGISTER_DUMP_REGION)) + return; + + /* Register kernel log buffer */ + addr = log_buf_addr_get(); + if (addr == NULL) + return; + + size = log_buf_len_get(); + if (size == 0) + return; + + rc = opal_register_dump_region(OPAL_DUMP_REGION_LOG_BUF, + __pa(addr), size); + /* Don't warn if this is just an older OPAL that doesn't + * know about that call + */ + if (rc && rc != OPAL_UNSUPPORTED) + pr_warn("DUMP: Failed to register kernel log buffer. " + "rc = %d\n", rc); +} + +static void __init opal_pdev_init(const char *compatible) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, compatible) + of_platform_device_create(np, NULL, NULL); +} + +static void __init opal_imc_init_dev(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, IMC_DTB_COMPAT); + if (np) + of_platform_device_create(np, NULL, NULL); + + of_node_put(np); +} + +static int kopald(void *unused) +{ + unsigned long timeout = msecs_to_jiffies(opal_heartbeat) + 1; + + set_freezable(); + do { + try_to_freeze(); + + opal_handle_events(); + + set_current_state(TASK_INTERRUPTIBLE); + if (opal_have_pending_events()) + __set_current_state(TASK_RUNNING); + else + schedule_timeout(timeout); + + } while (!kthread_should_stop()); + + return 0; +} + +void opal_wake_poller(void) +{ + if (kopald_tsk) + wake_up_process(kopald_tsk); +} + +static void __init opal_init_heartbeat(void) +{ + /* Old firwmware, we assume the HVC heartbeat is sufficient */ + if (of_property_read_u32(opal_node, "ibm,heartbeat-ms", + &opal_heartbeat) != 0) + opal_heartbeat = 0; + + if (opal_heartbeat) + kopald_tsk = kthread_run(kopald, NULL, "kopald"); +} + +static int __init opal_init(void) +{ + struct device_node *np, *consoles, *leds; + int rc; + + opal_node = of_find_node_by_path("/ibm,opal"); + if (!opal_node) { + pr_warn("Device node not found\n"); + return -ENODEV; + } + + /* Register OPAL consoles if any ports */ + consoles = of_find_node_by_path("/ibm,opal/consoles"); + if (consoles) { + for_each_child_of_node(consoles, np) { + if (!of_node_name_eq(np, "serial")) + continue; + of_platform_device_create(np, NULL, NULL); + } + of_node_put(consoles); + } + + /* Initialise OPAL messaging system */ + opal_message_init(opal_node); + + /* Initialise OPAL asynchronous completion interface */ + opal_async_comp_init(); + + /* Initialise OPAL sensor interface */ + opal_sensor_init(); + + /* Initialise OPAL hypervisor maintainence interrupt handling */ + opal_hmi_handler_init(); + + /* Create i2c platform devices */ + opal_pdev_init("ibm,opal-i2c"); + + /* Handle non-volatile memory devices */ + opal_pdev_init("pmem-region"); + + /* Setup a heatbeat thread if requested by OPAL */ + opal_init_heartbeat(); + + /* Detect In-Memory Collection counters and create devices*/ + opal_imc_init_dev(); + + /* Create leds platform devices */ + leds = of_find_node_by_path("/ibm,opal/leds"); + if (leds) { + of_platform_device_create(leds, "opal_leds", NULL); + of_node_put(leds); + } + + /* Initialise OPAL message log interface */ + opal_msglog_init(); + + /* Create "opal" kobject under /sys/firmware */ + rc = opal_sysfs_init(); + if (rc == 0) { + /* Setup dump region interface */ + opal_dump_region_init(); + /* Setup error log interface */ + rc = opal_elog_init(); + /* Setup code update interface */ + opal_flash_update_init(); + /* Setup platform dump extract interface */ + opal_platform_dump_init(); + /* Setup system parameters interface */ + opal_sys_param_init(); + /* Setup message log sysfs interface. */ + opal_msglog_sysfs_init(); + /* Add all export properties*/ + opal_export_attrs(); + } + + /* Initialize platform devices: IPMI backend, PRD & flash interface */ + opal_pdev_init("ibm,opal-ipmi"); + opal_pdev_init("ibm,opal-flash"); + opal_pdev_init("ibm,opal-prd"); + + /* Initialise platform device: oppanel interface */ + opal_pdev_init("ibm,opal-oppanel"); + + /* Initialise OPAL kmsg dumper for flushing console on panic */ + opal_kmsg_init(); + + /* Initialise OPAL powercap interface */ + opal_powercap_init(); + + /* Initialise OPAL Power-Shifting-Ratio interface */ + opal_psr_init(); + + /* Initialise OPAL sensor groups */ + opal_sensor_groups_init(); + + /* Initialise OPAL Power control interface */ + opal_power_control_init(); + + /* Initialize OPAL secure variables */ + opal_pdev_init("ibm,secvar-backend"); + + return 0; +} +machine_subsys_initcall(powernv, opal_init); + +void opal_shutdown(void) +{ + long rc = OPAL_BUSY; + + opal_event_shutdown(); + + /* + * Then sync with OPAL which ensure anything that can + * potentially write to our memory has completed such + * as an ongoing dump retrieval + */ + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_sync_host_reboot(); + if (rc == OPAL_BUSY) + opal_poll_events(NULL); + else + mdelay(10); + } + + /* Unregister memory dump region */ + if (opal_check_token(OPAL_UNREGISTER_DUMP_REGION)) + opal_unregister_dump_region(OPAL_DUMP_REGION_LOG_BUF); +} + +/* Export this so that test modules can use it */ +EXPORT_SYMBOL_GPL(opal_invalid_call); +EXPORT_SYMBOL_GPL(opal_xscom_read); +EXPORT_SYMBOL_GPL(opal_xscom_write); +EXPORT_SYMBOL_GPL(opal_ipmi_send); +EXPORT_SYMBOL_GPL(opal_ipmi_recv); +EXPORT_SYMBOL_GPL(opal_flash_read); +EXPORT_SYMBOL_GPL(opal_flash_write); +EXPORT_SYMBOL_GPL(opal_flash_erase); +EXPORT_SYMBOL_GPL(opal_prd_msg); +EXPORT_SYMBOL_GPL(opal_check_token); + +/* Convert a region of vmalloc memory to an opal sg list */ +struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr, + unsigned long vmalloc_size) +{ + struct opal_sg_list *sg, *first = NULL; + unsigned long i = 0; + + sg = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!sg) + goto nomem; + + first = sg; + + while (vmalloc_size > 0) { + uint64_t data = vmalloc_to_pfn(vmalloc_addr) << PAGE_SHIFT; + uint64_t length = min(vmalloc_size, PAGE_SIZE); + + sg->entry[i].data = cpu_to_be64(data); + sg->entry[i].length = cpu_to_be64(length); + i++; + + if (i >= SG_ENTRIES_PER_NODE) { + struct opal_sg_list *next; + + next = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!next) + goto nomem; + + sg->length = cpu_to_be64( + i * sizeof(struct opal_sg_entry) + 16); + i = 0; + sg->next = cpu_to_be64(__pa(next)); + sg = next; + } + + vmalloc_addr += length; + vmalloc_size -= length; + } + + sg->length = cpu_to_be64(i * sizeof(struct opal_sg_entry) + 16); + + return first; + +nomem: + pr_err("%s : Failed to allocate memory\n", __func__); + opal_free_sg_list(first); + return NULL; +} + +void opal_free_sg_list(struct opal_sg_list *sg) +{ + while (sg) { + uint64_t next = be64_to_cpu(sg->next); + + kfree(sg); + + if (next) + sg = __va(next); + else + sg = NULL; + } +} + +int opal_error_code(int rc) +{ + switch (rc) { + case OPAL_SUCCESS: return 0; + + case OPAL_PARAMETER: return -EINVAL; + case OPAL_ASYNC_COMPLETION: return -EINPROGRESS; + case OPAL_BUSY: + case OPAL_BUSY_EVENT: return -EBUSY; + case OPAL_NO_MEM: return -ENOMEM; + case OPAL_PERMISSION: return -EPERM; + + case OPAL_UNSUPPORTED: return -EIO; + case OPAL_HARDWARE: return -EIO; + case OPAL_INTERNAL_ERROR: return -EIO; + case OPAL_TIMEOUT: return -ETIMEDOUT; + default: + pr_err("%s: unexpected OPAL error %d\n", __func__, rc); + return -EIO; + } +} + +void powernv_set_nmmu_ptcr(unsigned long ptcr) +{ + int rc; + + if (firmware_has_feature(FW_FEATURE_OPAL)) { + rc = opal_nmmu_set_ptcr(-1UL, ptcr); + if (rc != OPAL_SUCCESS && rc != OPAL_UNSUPPORTED) + pr_warn("%s: Unable to set nest mmu ptcr\n", __func__); + } +} + +EXPORT_SYMBOL_GPL(opal_poll_events); +EXPORT_SYMBOL_GPL(opal_rtc_read); +EXPORT_SYMBOL_GPL(opal_rtc_write); +EXPORT_SYMBOL_GPL(opal_tpo_read); +EXPORT_SYMBOL_GPL(opal_tpo_write); +EXPORT_SYMBOL_GPL(opal_i2c_request); +/* Export these symbols for PowerNV LED class driver */ +EXPORT_SYMBOL_GPL(opal_leds_get_ind); +EXPORT_SYMBOL_GPL(opal_leds_set_ind); +/* Export this symbol for PowerNV Operator Panel class driver */ +EXPORT_SYMBOL_GPL(opal_write_oppanel_async); +/* Export this for KVM */ +EXPORT_SYMBOL_GPL(opal_int_set_mfrr); +EXPORT_SYMBOL_GPL(opal_int_eoi); +EXPORT_SYMBOL_GPL(opal_error_code); +/* Export the below symbol for NX compression */ +EXPORT_SYMBOL(opal_nx_coproc_init); |