diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts')
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts | 22 |
1 files changed, 21 insertions, 1 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts index e82af72f1a..692c696e1a 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts +++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts @@ -6,7 +6,6 @@ /dts-v1/; #include "jh7100-common.dtsi" -#include <dt-bindings/gpio/gpio.h> / { model = "StarFive VisionFive V1"; @@ -18,3 +17,24 @@ priority = <224>; }; }; + +&gmac { + phy-handle = <&phy>; +}; + +/* + * The board uses a Motorcomm YT8521 PHY supporting RGMII-ID, but requires + * manual adjustment of the RX internal delay to work properly. The default + * RX delay provided by the driver (1.95ns) is too high, but applying a 50% + * reduction seems to mitigate the issue. + * + * It is worth noting the adjustment is not necessary on BeagleV Starlight SBC, + * which uses a Microchip PHY. Hence, most likely the Motorcomm PHY is the one + * responsible for the misbehaviour, not the GMAC. + */ +&mdio { + phy: ethernet-phy@0 { + reg = <0>; + rx-internal-delay-ps = <900>; + }; +}; |