diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive/jh7100.dtsi')
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100.dtsi | 289 |
1 files changed, 289 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi new file mode 100644 index 0000000000..35ab54fb23 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2021 StarFive Technology Co., Ltd. + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include <dt-bindings/clock/starfive-jh7100.h> +#include <dt-bindings/reset/starfive-jh7100.h> + +/ { + compatible = "starfive,jh7100"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + U74_0: cpu@0 { + compatible = "sifive,u74-mc", "riscv"; + reg = <0>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + riscv,isa = "rv64imafdc"; + tlb-split; + + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_1: cpu@1 { + compatible = "sifive,u74-mc", "riscv"; + reg = <1>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + riscv,isa = "rv64imafdc"; + tlb-split; + + cpu1_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&U74_0>; + }; + + core1 { + cpu = <&U74_1>; + }; + }; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <15000>; + + thermal-sensors = <&sfctemp>; + + trips { + cpu_alert0 { + /* milliCelsius */ + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit { + /* milliCelsius */ + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + osc_sys: osc_sys { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + osc_aud: osc_aud { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + gmac_rmii_ref: gmac_rmii_ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* Should be overridden by the board when needed */ + clock-frequency = <0>; + }; + + gmac_gr_mii_rxclk: gmac_gr_mii_rxclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* Should be overridden by the board when needed */ + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&plic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clint: clint@2000000 { + compatible = "starfive,jh7100-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 + &cpu1_intc 3 &cpu1_intc 7>; + }; + + plic: interrupt-controller@c000000 { + compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9 + &cpu1_intc 11 &cpu1_intc 9>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + riscv,ndev = <133>; + }; + + clkgen: clock-controller@11800000 { + compatible = "starfive,jh7100-clkgen"; + reg = <0x0 0x11800000 0x0 0x10000>; + clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>; + clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk"; + #clock-cells = <1>; + }; + + rstgen: reset-controller@11840000 { + compatible = "starfive,jh7100-reset"; + reg = <0x0 0x11840000 0x0 0x10000>; + #reset-cells = <1>; + }; + + i2c0: i2c@118b0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x118b0000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C0_CORE>, + <&clkgen JH7100_CLK_I2C0_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C0_APB>; + interrupts = <96>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@118c0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x118c0000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C1_CORE>, + <&clkgen JH7100_CLK_I2C1_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C1_APB>; + interrupts = <97>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gpio: pinctrl@11910000 { + compatible = "starfive,jh7100-pinctrl"; + reg = <0x0 0x11910000 0x0 0x10000>, + <0x0 0x11858000 0x0 0x1000>; + reg-names = "gpio", "padctl"; + clocks = <&clkgen JH7100_CLK_GPIO_APB>; + resets = <&rstgen JH7100_RSTN_GPIO_APB>; + interrupts = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart2: serial@12430000 { + compatible = "starfive,jh7100-uart", "snps,dw-apb-uart"; + reg = <0x0 0x12430000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_UART2_CORE>, + <&clkgen JH7100_CLK_UART2_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&rstgen JH7100_RSTN_UART2_APB>; + interrupts = <72>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@12440000 { + compatible = "starfive,jh7100-uart", "snps,dw-apb-uart"; + reg = <0x0 0x12440000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_UART3_CORE>, + <&clkgen JH7100_CLK_UART3_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&rstgen JH7100_RSTN_UART3_APB>; + interrupts = <73>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c2: i2c@12450000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12450000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C2_CORE>, + <&clkgen JH7100_CLK_I2C2_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C2_APB>; + interrupts = <74>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@12460000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12460000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C3_CORE>, + <&clkgen JH7100_CLK_I2C3_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C3_APB>; + interrupts = <75>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + watchdog@12480000 { + compatible = "starfive,jh7100-wdt"; + reg = <0x0 0x12480000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_WDTIMER_APB>, + <&clkgen JH7100_CLK_WDT_CORE>; + clock-names = "apb", "core"; + resets = <&rstgen JH7100_RSTN_WDTIMER_APB>, + <&rstgen JH7100_RSTN_WDT>; + }; + + sfctemp: temperature-sensor@124a0000 { + compatible = "starfive,jh7100-temp"; + reg = <0x0 0x124a0000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_TEMP_SENSE>, + <&clkgen JH7100_CLK_TEMP_APB>; + clock-names = "sense", "bus"; + resets = <&rstgen JH7100_RSTN_TEMP_SENSE>, + <&rstgen JH7100_RSTN_TEMP_APB>; + reset-names = "sense", "bus"; + #thermal-sensor-cells = <0>; + }; + }; +}; |