diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi')
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 584 |
1 files changed, 1 insertions, 583 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index ccd0ce55aa..9d70f21c86 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -5,188 +5,11 @@ */ /dts-v1/; -#include "jh7110.dtsi" -#include "jh7110-pinfunc.h" -#include <dt-bindings/gpio/gpio.h> +#include "jh7110-common.dtsi" / { aliases { - ethernet0 = &gmac0; ethernet1 = &gmac1; - i2c0 = &i2c0; - i2c2 = &i2c2; - i2c5 = &i2c5; - i2c6 = &i2c6; - mmc0 = &mmc0; - mmc1 = &mmc1; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - timebase-frequency = <4000000>; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0x1 0x0>; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; - priority = <224>; - }; - - pwmdac_codec: pwmdac-codec { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - }; - - sound-pwmdac { - compatible = "simple-audio-card"; - simple-audio-card,name = "StarFive-PWMDAC-Sound-Card"; - #address-cells = <1>; - #size-cells = <0>; - - simple-audio-card,dai-link@0 { - reg = <0>; - format = "left_j"; - bitclock-master = <&sndcpu0>; - frame-master = <&sndcpu0>; - - sndcpu0: cpu { - sound-dai = <&pwmdac>; - }; - - codec { - sound-dai = <&pwmdac_codec>; - }; - }; - }; -}; - -&dvp_clk { - clock-frequency = <74250000>; -}; - -&gmac0_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&gmac0_rmii_refin { - clock-frequency = <50000000>; -}; - -&gmac1_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&gmac1_rmii_refin { - clock-frequency = <50000000>; -}; - -&hdmitx0_pixelclk { - clock-frequency = <297000000>; -}; - -&i2srx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2srx_lrck_ext { - clock-frequency = <192000>; -}; - -&i2stx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2stx_lrck_ext { - clock-frequency = <192000>; -}; - -&mclk_ext { - clock-frequency = <12288000>; -}; - -&osc { - clock-frequency = <24000000>; -}; - -&rtc_osc { - clock-frequency = <32768>; -}; - -&tdm_ext { - clock-frequency = <49152000>; -}; - -&camss { - assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, - <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; - assigned-clock-rates = <49500000>, <198000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - - camss_from_csi2rx: endpoint { - remote-endpoint = <&csi2rx_to_camss>; - }; - }; - }; -}; - -&csi2rx { - assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; - assigned-clock-rates = <297000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - /* remote MIPI sensor endpoint */ - }; - - port@1 { - reg = <1>; - - csi2rx_to_camss: endpoint { - remote-endpoint = <&camss_from_csi2rx>; - }; - }; - }; -}; - -&gmac0 { - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; }; }; @@ -206,411 +29,6 @@ }; }; -&i2c0 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&i2c5 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; - status = "okay"; - - axp15060: pmic@36 { - compatible = "x-powers,axp15060"; - reg = <0x36>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - vcc_3v3: dcdc1 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_3v3"; - }; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1540000>; - regulator-name = "vdd-cpu"; - }; - - emmc_vdd: aldo4 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "emmc_vdd"; - }; - }; - }; -}; - -&i2c6 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - status = "okay"; -}; - &mmc0 { - max-frequency = <100000000>; - assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; - assigned-clock-rates = <50000000>; - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; non-removable; - cap-mmc-hw-reset; - post-power-on-delay-ms = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&emmc_vdd>; - status = "okay"; -}; - -&mmc1 { - max-frequency = <100000000>; - assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; - assigned-clock-rates = <50000000>; - bus-width = <4>; - no-sdio; - no-mmc; - broken-cd; - cap-sd-highspeed; - post-power-on-delay-ms = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - status = "okay"; -}; - -&pwmdac { - pinctrl-names = "default"; - pinctrl-0 = <&pwmdac_pins>; - status = "okay"; -}; - -&qspi { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - nor_flash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - cdns,read-delay = <5>; - spi-max-frequency = <12000000>; - cdns,tshsl-ns = <1>; - cdns,tsd2d-ns = <1>; - cdns,tchsh-ns = <1>; - cdns,tslch-ns = <1>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - spl@0 { - reg = <0x0 0x80000>; - }; - uboot-env@f0000 { - reg = <0xf0000 0x10000>; - }; - uboot@100000 { - reg = <0x100000 0x400000>; - }; - reserved-data@600000 { - reg = <0x600000 0xa00000>; - }; - }; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm_pins>; - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - status = "okay"; - - spi_dev0: spi@0 { - compatible = "rohm,dh2228fv"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; - -&sysgpio { - i2c0_pins: i2c0-0 { - i2c-pins { - pinmux = <GPIOMUX(57, GPOUT_LOW, - GPOEN_SYS_I2C0_CLK, - GPI_SYS_I2C0_CLK)>, - <GPIOMUX(58, GPOUT_LOW, - GPOEN_SYS_I2C0_DATA, - GPI_SYS_I2C0_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c2_pins: i2c2-0 { - i2c-pins { - pinmux = <GPIOMUX(3, GPOUT_LOW, - GPOEN_SYS_I2C2_CLK, - GPI_SYS_I2C2_CLK)>, - <GPIOMUX(2, GPOUT_LOW, - GPOEN_SYS_I2C2_DATA, - GPI_SYS_I2C2_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c5_pins: i2c5-0 { - i2c-pins { - pinmux = <GPIOMUX(19, GPOUT_LOW, - GPOEN_SYS_I2C5_CLK, - GPI_SYS_I2C5_CLK)>, - <GPIOMUX(20, GPOUT_LOW, - GPOEN_SYS_I2C5_DATA, - GPI_SYS_I2C5_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c6_pins: i2c6-0 { - i2c-pins { - pinmux = <GPIOMUX(16, GPOUT_LOW, - GPOEN_SYS_I2C6_CLK, - GPI_SYS_I2C6_CLK)>, - <GPIOMUX(17, GPOUT_LOW, - GPOEN_SYS_I2C6_DATA, - GPI_SYS_I2C6_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - mmc0_pins: mmc0-0 { - rst-pins { - pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - mmc-pins { - pinmux = <PINMUX(64, 0)>, - <PINMUX(65, 0)>, - <PINMUX(66, 0)>, - <PINMUX(67, 0)>, - <PINMUX(68, 0)>, - <PINMUX(69, 0)>, - <PINMUX(70, 0)>, - <PINMUX(71, 0)>, - <PINMUX(72, 0)>, - <PINMUX(73, 0)>; - bias-pull-up; - drive-strength = <12>; - input-enable; - }; - }; - - mmc1_pins: mmc1-0 { - clk-pins { - pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - mmc-pins { - pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, - GPOEN_SYS_SDIO1_CMD, - GPI_SYS_SDIO1_CMD)>, - <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, - GPOEN_SYS_SDIO1_DATA0, - GPI_SYS_SDIO1_DATA0)>, - <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, - GPOEN_SYS_SDIO1_DATA1, - GPI_SYS_SDIO1_DATA1)>, - <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, - GPOEN_SYS_SDIO1_DATA2, - GPI_SYS_SDIO1_DATA2)>, - <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, - GPOEN_SYS_SDIO1_DATA3, - GPI_SYS_SDIO1_DATA3)>; - bias-pull-up; - drive-strength = <12>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; - - pwmdac_pins: pwmdac-0 { - pwmdac-pins { - pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT, - GPOEN_ENABLE, - GPI_NONE)>, - <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <2>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - }; - - pwm_pins: pwm-0 { - pwm-pins { - pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, - GPOEN_SYS_PWM0_CHANNEL0, - GPI_NONE)>, - <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, - GPOEN_SYS_PWM0_CHANNEL1, - GPI_NONE)>; - bias-disable; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - }; - - spi0_pins: spi0-0 { - mosi-pins { - pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - - miso-pins { - pinmux = <GPIOMUX(53, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_SPI0_RXD)>; - bias-pull-up; - input-enable; - input-schmitt-enable; - }; - - sck-pins { - pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK, - GPOEN_ENABLE, - GPI_SYS_SPI0_CLK)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - - ss-pins { - pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS, - GPOEN_ENABLE, - GPI_SYS_SPI0_FSS)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - }; - - uart0_pins: uart0-0 { - tx-pins { - pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(6, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_UART0_RX)>; - bias-disable; /* external pull-up */ - drive-strength = <2>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&usb0 { - dr_mode = "peripheral"; - status = "okay"; -}; - -&U74_1 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_2 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_3 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_4 { - cpu-supply = <&vdd_cpu>; }; |