4 files changed, 31 insertions, 49 deletions

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 19e0681f04..d04371e851 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -231,9 +231,7 @@ static bool __get_mem_config_intel(struct rdt_resource *r)
 static bool __rdt_get_mem_config_amd(struct rdt_resource *r)
 {
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
-	union cpuid_0x10_3_eax eax;
-	union cpuid_0x10_x_edx edx;
-	u32 ebx, ecx, subleaf;
+	u32 eax, ebx, ecx, edx, subleaf;
 
 	/*
 	 * Query CPUID_Fn80000020_EDX_x01 for MBA and
@@ -241,9 +239,9 @@ static bool __rdt_get_mem_config_amd(struct rdt_resource *r)
 	 */
 	subleaf = (r->rid == RDT_RESOURCE_SMBA) ? 2 :  1;
 
-	cpuid_count(0x80000020, subleaf, &eax.full, &ebx, &ecx, &edx.full);
-	hw_res->num_closid = edx.split.cos_max + 1;
-	r->default_ctrl = MAX_MBA_BW_AMD;
+	cpuid_count(0x80000020, subleaf, &eax, &ebx, &ecx, &edx);
+	hw_res->num_closid = edx + 1;
+	r->default_ctrl = 1 << eax;
 
 	/* AMD does not use delay */
 	r->membw.delay_linear = false;
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index a4f1aa15f0..52e7e7deee 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -18,7 +18,6 @@
 #define MBM_OVERFLOW_INTERVAL		1000
 #define MAX_MBA_BW			100u
 #define MBA_IS_LINEAR			0x4
-#define MAX_MBA_BW_AMD			0x800
 #define MBM_CNTR_WIDTH_OFFSET_AMD	20
 
 #define RMID_VAL_ERROR			BIT_ULL(63)
@@ -296,14 +295,10 @@ struct rftype {
  * struct mbm_state - status for each MBM counter in each domain
  * @prev_bw_bytes: Previous bytes value read for bandwidth calculation
  * @prev_bw:	The most recent bandwidth in MBps
- * @delta_bw:	Difference between the current and previous bandwidth
- * @delta_comp:	Indicates whether to compute the delta_bw
  */
 struct mbm_state {
 	u64	prev_bw_bytes;
 	u32	prev_bw;
-	u32	delta_bw;
-	bool	delta_comp;
 };
 
 /**
@@ -395,6 +390,8 @@ struct rdt_parse_data {
  * @msr_update:		Function pointer to update QOS MSRs
  * @mon_scale:		cqm counter * mon_scale = occupancy in bytes
  * @mbm_width:		Monitor width, to detect and correct for overflow.
+ * @mbm_cfg_mask:	Bandwidth sources that can be tracked when Bandwidth
+ *			Monitoring Event Configuration (BMEC) is supported.
  * @cdp_enabled:	CDP state of this resource
  *
  * Members of this structure are either private to the architecture
@@ -409,6 +406,7 @@ struct rdt_hw_resource {
 				 struct rdt_resource *r);
 	unsigned int		mon_scale;
 	unsigned int		mbm_width;
+	unsigned int		mbm_cfg_mask;
 	bool			cdp_enabled;
 };
 
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index f136ac0468..3a6c069614 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -440,9 +440,6 @@ static void mbm_bw_count(u32 rmid, struct rmid_read *rr)
 
 	cur_bw = bytes / SZ_1M;
 
-	if (m->delta_comp)
-		m->delta_bw = abs(cur_bw - m->prev_bw);
-	m->delta_comp = false;
 	m->prev_bw = cur_bw;
 }
 
@@ -520,11 +517,11 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 {
 	u32 closid, rmid, cur_msr_val, new_msr_val;
 	struct mbm_state *pmbm_data, *cmbm_data;
-	u32 cur_bw, delta_bw, user_bw;
 	struct rdt_resource *r_mba;
 	struct rdt_domain *dom_mba;
 	struct list_head *head;
 	struct rdtgroup *entry;
+	u32 cur_bw, user_bw;
 
 	if (!is_mbm_local_enabled())
 		return;
@@ -543,7 +540,6 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 
 	cur_bw = pmbm_data->prev_bw;
 	user_bw = dom_mba->mbps_val[closid];
-	delta_bw = pmbm_data->delta_bw;
 
 	/* MBA resource doesn't support CDP */
 	cur_msr_val = resctrl_arch_get_config(r_mba, dom_mba, closid, CDP_NONE);
@@ -555,49 +551,31 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 	list_for_each_entry(entry, head, mon.crdtgrp_list) {
 		cmbm_data = &dom_mbm->mbm_local[entry->mon.rmid];
 		cur_bw += cmbm_data->prev_bw;
-		delta_bw += cmbm_data->delta_bw;
 	}
 
 	/*
 	 * Scale up/down the bandwidth linearly for the ctrl group.  The
 	 * bandwidth step is the bandwidth granularity specified by the
 	 * hardware.
-	 *
-	 * The delta_bw is used when increasing the bandwidth so that we
-	 * dont alternately increase and decrease the control values
-	 * continuously.
-	 *
-	 * For ex: consider cur_bw = 90MBps, user_bw = 100MBps and if
-	 * bandwidth step is 20MBps(> user_bw - cur_bw), we would keep
-	 * switching between 90 and 110 continuously if we only check
-	 * cur_bw < user_bw.
+	 * Always increase throttling if current bandwidth is above the
+	 * target set by user.
+	 * But avoid thrashing up and down on every poll by checking
+	 * whether a decrease in throttling is likely to push the group
+	 * back over target. E.g. if currently throttling to 30% of bandwidth
+	 * on a system with 10% granularity steps, check whether moving to
+	 * 40% would go past the limit by multiplying current bandwidth by
+	 * "(30 + 10) / 30".
 	 */
 	if (cur_msr_val > r_mba->membw.min_bw && user_bw < cur_bw) {
 		new_msr_val = cur_msr_val - r_mba->membw.bw_gran;
 	} else if (cur_msr_val < MAX_MBA_BW &&
-		   (user_bw > (cur_bw + delta_bw))) {
+		   (user_bw > (cur_bw * (cur_msr_val + r_mba->membw.min_bw) / cur_msr_val))) {
 		new_msr_val = cur_msr_val + r_mba->membw.bw_gran;
 	} else {
 		return;
 	}
 
 	resctrl_arch_update_one(r_mba, dom_mba, closid, CDP_NONE, new_msr_val);
-
-	/*
-	 * Delta values are updated dynamically package wise for each
-	 * rdtgrp every time the throttle MSR changes value.
-	 *
-	 * This is because (1)the increase in bandwidth is not perfectly
-	 * linear and only "approximately" linear even when the hardware
-	 * says it is linear.(2)Also since MBA is a core specific
-	 * mechanism, the delta values vary based on number of cores used
-	 * by the rdtgrp.
-	 */
-	pmbm_data->delta_comp = true;
-	list_for_each_entry(entry, head, mon.crdtgrp_list) {
-		cmbm_data = &dom_mbm->mbm_local[entry->mon.rmid];
-		cmbm_data->delta_comp = true;
-	}
 }
 
 static void mbm_update(struct rdt_resource *r, struct rdt_domain *d, int rmid)
@@ -813,6 +791,12 @@ int __init rdt_get_mon_l3_config(struct rdt_resource *r)
 		return ret;
 
 	if (rdt_cpu_has(X86_FEATURE_BMEC)) {
+		u32 eax, ebx, ecx, edx;
+
+		/* Detect list of bandwidth sources that can be tracked */
+		cpuid_count(0x80000020, 3, &eax, &ebx, &ecx, &edx);
+		hw_res->mbm_cfg_mask = ecx & MAX_EVT_CONFIG_BITS;
+
 		if (rdt_cpu_has(X86_FEATURE_CQM_MBM_TOTAL)) {
 			mbm_total_event.configurable = true;
 			mbm_config_rftype_init("mbm_total_bytes_config");
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 69a1de9238..2b69e560b0 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1620,12 +1620,6 @@ static int mbm_config_write_domain(struct rdt_resource *r,
 	struct mon_config_info mon_info = {0};
 	int ret = 0;
 
-	/* mon_config cannot be more than the supported set of events */
-	if (val > MAX_EVT_CONFIG_BITS) {
-		rdt_last_cmd_puts("Invalid event configuration\n");
-		return -EINVAL;
-	}
-
 	/*
 	 * Read the current config value first. If both are the same then
 	 * no need to write it again.
@@ -1663,6 +1657,7 @@ out:
 
 static int mon_config_write(struct rdt_resource *r, char *tok, u32 evtid)
 {
+	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	char *dom_str = NULL, *id_str;
 	unsigned long dom_id, val;
 	struct rdt_domain *d;
@@ -1686,6 +1681,13 @@ next:
 		return -EINVAL;
 	}
 
+	/* Value from user cannot be more than the supported set of events */
+	if ((val & hw_res->mbm_cfg_mask) != val) {
+		rdt_last_cmd_printf("Invalid event configuration: max valid mask is 0x%02x\n",
+				    hw_res->mbm_cfg_mask);
+		return -EINVAL;
+	}
+
 	list_for_each_entry(d, &r->domains, list) {
 		if (d->id == dom_id) {
 			ret = mbm_config_write_domain(r, d, evtid, val);