diff options
Diffstat (limited to 'debian/changelog')
| -rw-r--r-- | debian/changelog | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/debian/changelog b/debian/changelog index 13e7360e95..5931e65982 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,193 @@ +linux (6.10.3-1) unstable; urgency=medium + + * New upstream stable update: + https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.10.2 + https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.10.3 + - ext4: don't track ranges in fast_commit if inode has inlined data + (Closes: #1039883) + + [ Salvatore Bonaccorso ] + * [rt] Update to 6.10.2-rt14 + - Refresh patches and drop patches applied upstream + * [arm64] drivers/net/ethernet/microsoft: Enable MICROSOFT_MANA as module + * drivers/net/ethernet/pensando: Enable IONIC as module (Closes: #1041893) + + [ Vincent Blut ] + * [arm64] drivers/phy/marvell: Enable PHY_MVEBU_CP110_UTMI as module + (Closes: #1076934) + + [ Ben Hutchings ] + * net: drop bad gso csum_start and offset in virtio_net_hdr (regression in + 6.10.3) + * spi: spidev: Add missing spi_device_id for bh2228fv (regression in 6.10.3) + + -- Ben Hutchings <benh@debian.org> Sun, 04 Aug 2024 22:10:58 +0200 + +linux (6.10.1-1~exp1) experimental; urgency=medium + + * New upstream stable update: + https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.10.1 + + [ Diederik de Haas ] + * [arm64] Add MediaTek MT7986a SoC support + - [arm64] drivers/net/ethernet/mediatek: Enable NET_VENDOR_MEDIATEK + - [arm64] drivers/net/ethernet/mediatek: Enable NET_MEDIATEK_SOC as module + - [arm64] drivers/net/wireless/mediatek/mt76/mt7915: Enable MT798X_WMAC + - [arm64] drivers/pwm: Enable PWM_MEDIATEK as module + - [arm64] drivers/thermal/mediatek: Enable MTK_SOC_THERMAL as module + * [arm64] Add Bananapi BPI-R3 support (Closes: #1072968) + - [arm64] drivers/mtd/nand: Enable MTD_NAND_ECC_MEDIATEK as module + - [arm64] drivers/mtd/nand/spi: Enable MTD_SPI_NAND as module + - [arm64] drivers/net/dsa: Enable NET_DSA_MT7530, NET_DSA_MT7530_MDIO and + NET_DSA_MT7530_MMIO as modules + - [arm64] drivers/spi: Enable SPI_MTK_SNFI as module + * [arm64] Enable support for Pine64's PineTab2: + - drivers/iio/accel: Enable IIO_ST_ACCEL_I2C_3AXIS as module + - [arm64] drivers/gpu/drm/panel: Enable DRM_PANEL_BOE_TH101MB31UIG002_28A + as module + - [arm64] drivers/media/i2c: Enable VIDEO_OV5648 and VIDEO_DW9714 as module + * [arm64] drivers/gpu/drm/bridge/synopsys: Enable DRM_DW_HDMI_I2S_AUDIO as + module + * drivers/devfreq: Enable PM_DEVFREQ + * [arm64,armhf] drivers/devfreq: Make DEVFREQ_GOV_SIMPLE_ONDEMAND builtin + + [ Emanuele Rocca ] + * [arm64] Enable support for Renesas boards RZ/G3S (ARCH_R9A08G045) and + RZ/V2H (ARCH_R9A09G057). (Closes: #1072574) + * [arm64] Re-enable RELR, kernels built with binutils 2.42.90.20240720 boot + fine. (Cf. #1074111). + + [ Bastian Blank ] + * [ppc64*] Switch default kernel to 4k page size. (closes: #1074217) + * [ppc64*] Add additional kernel with 64k page size. + * Remove unused check for image size. + * [arm64] Add additional kernel with 16k page size. + + [ Ben Hutchings ] + * d/b/test-patches: Handle kernel release strings without ABI number + * d/b/test-patches: Stop looking for featuresets other than rt + * d/b/test-patches: Update config overrides for the current format + * d/b/buildcheck.py: Restore reading of config to pass to check classes + * d/b/buildcheck.py, d/rules.real: Run buildcheck.py in setup as well + * d/b/buildcheck.py: Restore config checks on kernels to be signed + * [alpha] scsi: Disable SCSI_IMM (fixes FTBFS) + + [ Aurelien Jarno ] + * [riscv64] Enable CONFIG_ARCH_CANAAN to support Canaan Kendryte SoCs. + * [riscv64] Enable CONFIG_CLK_SOPHGO_CV1800 as a module. + * [riscv64] Enable CONFIG_ACPI_CPPC_CPUFREQ as a module. + + [ Vincent Blut ] + * [amd64/cloud] drivers/watchdog: Enable I6300ESB_WDT as module + (Closes: #1067908) + * [x86] drivers/platform/x86: Enable MSI_EC as module + + [ Salvatore Bonaccorso ] + * drivers/md/dm-vdo: Enable DM_VDO as module (Closes: #1076457) + * drivers/net: Enable NETKIT (BPF-programmable network device) (except for + sh4/sh7785lcr) (Closes: #1076962) + * fs/erofs: Enable more EROFS compression algorithms (Closes: #1076570) + - Enable EROFS_FS_ZIP_LZMA + - Enable EROFS_FS_ZIP_DEFLATE + - Enable EROFS_FS_ZIP_ZSTD + + [ Richard Hansen ] + * [x86] sound/soc/intel/avs/boards: Enable SND_SOC_INTEL_AVS_MACH_MAX98927 as + a module (Closes: #1076062) + + [ YunQiang Su ] + * [mips64el] Add mips64r6el flavor. + * [mips*] Enable R2 to R6 emulator for all R6 flavors. + + [ Sergio Durigan Junior ] + * Enable debuginfod support. (Closes: #1072311) + libdebuginfod is dual-licensed LGPL-3+ and GPL-2+, which makes it + possible for perf to link against the library. + - d/rules.d/t/perf/Makefile: Remove NO_LIBDEBUGINFOD=1. + - d/templates/tools-unversioned.control.in: B-D on libdebuginfod-dev. + + [ Dmitry Baryshkov ] + * [arm64] Enable config options for Qualcomm boards: + - Enable INTERCONNECT_QCOM_MSM8996, INTERCONNECT_QCOM_QCM2290, + INTERCONNECT_QCOM_SC7280, INTERCONNECT_QCOM_SM6115, and + INTERCONNECT_QCOM_SM8250 as built-in, this is required to get serial + console early during bootup + - Enable pincontrol PINCTRL_MSM8998, PINCTRL_QCM2290, PINCTRL_SC7280, + PINCTRL_SC7280_LPASS_LPI, PINCTRL_SM6115, PINCTRL_SM6115_LPASS_LPI, + PINCTRL_SM8250, PINCTRL_SM8250_LPASS_LPI as modules + - Enable clock controllers MSM_GCC_8998, QCOM_CLK_APCC_MSM8996, + QCOM_CLK_APCS_MSM8916, CLK_GFM_LPASS_SM8250, QCM_DISPCC_2290, + QCM_GCC_2290, QCOM_A53PLL, SC_CAMCC_7280, SC_DISPCC_7280, SC_GPUCC_7280, + SC_LPASS_CORECC_7280, SC_VIDEOCC_7280, SM_CAMCC_8250, SM_DISPCC_6115, + SM_DISPCC_8250, SM_GCC_6115, SM_GPUCC_6115, SM_GPUCC_8250, + SM_VIDEOCC_8250, SDM_LPASSCC_845 as modules + - Enable Audio drivers MFD_WCD934X, SLIM_QCOM_CTRL, SLIM_QCOM_NGD_CTRL, + SND_SOC_MSM8916_WCD_ANALOG, SND_SOC_MSM8916_WCD_DIGITAL, + SND_SOC_MSM8996, SND_SOC_SC7280, SND_SOC_SDM845, SND_SOC_SM8250, + SND_SOC_WCD9335, SND_SOC_WCD934X, SND_SOC_WSA881X as modules + - Enable other Qualcomm-specific drivers ARM_QCOM_CPUFREQ_NVMEM, + ATH10K_SNOC, CHARGER_QCOM_SMB2, I2C_QCOM_CCI, INTERCONNECT_QCOM_MSM8916, + MSM_GPUCC_8998, MSM_MMCC_8998, GPIO_WCD934X, QCOM_IPA, + PHY_QCOM_PCIE2, QCOM_GPI_DMA, QCOM_MPM, QCOM_RMTFS_MEM, QCOM_SOCINFO, + QCOM_WCNSS_PIL, REGULATOR_QCOM_USB_VBUS, RESET_QCOM_PDC, + TYPEC_QCOM_PMIC, UCSI_PMIC_GLINK as modules + - Enable DRM_LONTIUM_LT9611, DRM_LONTIUM_LT9611UXC, TYPEC_MUX_NB7VPQ904M + as moudles for devices present both on Qualcomm and non-Qualcomm + platforms + * [arm64] enable CONFIG_QCOM_LMH, another SDM845-related option + + [ Jochen Sprickerhof ] + * Enable snd_soc_pcm5102a as a module on armhf/arm64 + + [ Dylan Aïssi ] + * debian/rules: sort control.md5sums to improve reproducibility + + -- Ben Hutchings <benh@debian.org> Fri, 26 Jul 2024 17:53:15 +0200 + +linux (6.10-1~exp1) experimental; urgency=medium + + * New upstream release: https://kernelnewbies.org/Linux_6.10 + + [ Ben Hutchings ] + * d/l/p/debian_linux/firmware.py: Handle RawFile fields + * d/l/p/debian_linux/firmware.py: Correctly handle multiple licences per + section + * d/l/p/debian_linux/firmware.py: Handle quoted filenames + * Update to 6.10: + - Drop patches applied upstream: + - "alpha: Fix missing symbol versions for str{,n}{cat,cpy}" + - Refresh patches: + - Adjust context in "Include package version along with kernel release + in stack traces" + - Adjust context in "Documentation: Drop sphinx version check" + - Change "arm64/acpi: Add fixup for HPE m400 quirks" to not restructure + acpi_boot_table_init() + - Adjust context in "phy/marvell: disable 4-port phys" + * [rt] Update to 6.10-rc6-rt11 + * d/config: Update with the help of kconfigeditor2: + - Disable BASE_SMALL instead of enabling BASE_FULL + - drm/display: Enable DRM_DISPLAY_DP_AUX_CHARDEV instead of + DRM_DP_AUX_CHARDEV + - [arm64] Enable USB_ONBOARD_DEV instead of USB_ONBOARD_HUB + - [armel,armhf] Enable ARM_PAN instead of CPU_SW_DOMAIN_PAN + - [riscv64] Enable ARCH_MICROCHIP, ARCH_SIFIVE, ARCH_VIRT instead of + SOC_MICROCHIP_POLARFIRE, SOC_SIFIVE, SOC_VIRT + - [x86] drm/display: Enable DRM_DISPLAY_DP_AUX_CEC instead of DRM_DP_CEC + - [x86] staging/wlan-ng: Remove PRISM2_USB + * hyperv-daemons: Update for upstream removal of hv_fcopy_daemon + * [x86] linux-cpupower: Update turbostat Makefile to define BUILD_BUG_HEADER + * linux-bpf-dev: Set O to absolute directory in bpftool build + + [ Bastian Blank ] + * Use debhelper compatibility level 13. + * Add linux-bpf-dev package for BPF header. + * Replace dh-exec with static files everywhere. + + [ Punit Agrawal ] + * drivers/vfio: Enable VFIO configuration for all supported architectures + + -- Ben Hutchings <benh@debian.org> Thu, 18 Jul 2024 02:14:35 +0200 + linux (6.9.12-1~progress7.99u1) graograman-backports; urgency=medium * Uploading to graograman-backports, remaining changes: |