1 files changed, 0 insertions, 103 deletions
diff --git a/debian/patches-rt/0040-serial-mps2-uart-Use-port-lock-wrappers.patch b/debian/patches-rt/0040-serial-mps2-uart-Use-port-lock-wrappers.patch
deleted file mode 100644
index a626bdb03..000000000
--- a/debian/patches-rt/0040-serial-mps2-uart-Use-port-lock-wrappers.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From: Thomas Gleixner <tglx@linutronix.de>
-Date: Thu, 14 Sep 2023 20:43:57 +0206
-Subject: [PATCH 040/134] serial: mps2-uart: Use port lock wrappers
-Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
-
-When a serial port is used for kernel console output, then all
-modifications to the UART registers which are done from other contexts,
-e.g. getty, termios, are interference points for the kernel console.
-
-So far this has been ignored and the printk output is based on the
-principle of hope. The rework of the console infrastructure which aims to
-support threaded and atomic consoles, requires to mark sections which
-modify the UART registers as unsafe. This allows the atomic write function
-to make informed decisions and eventually to restore operational state. It
-also allows to prevent the regular UART code from modifying UART registers
-while printk output is in progress.
-
-All modifications of UART registers are guarded by the UART port lock,
-which provides an obvious synchronization point with the console
-infrastructure.
-
-To avoid adding this functionality to all UART drivers, wrap the
-spin_[un]lock*() invocations for uart_port::lock into helper functions
-which just contain the spin_[un]lock*() invocations for now. In a
-subsequent step these helpers will gain the console synchronization
-mechanisms.
-
-Converted with coccinelle. No functional change.
-
-Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-Signed-off-by: John Ogness <john.ogness@linutronix.de>
-Link: https://lore.kernel.org/r/20230914183831.587273-41-john.ogness@linutronix.de
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
----
- drivers/tty/serial/mps2-uart.c |   16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/tty/serial/mps2-uart.c
-+++ b/drivers/tty/serial/mps2-uart.c
-@@ -188,12 +188,12 @@ static irqreturn_t mps2_uart_rxirq(int i
- 	if (unlikely(!(irqflag & UARTn_INT_RX)))
- 		return IRQ_NONE;
- 
--	spin_lock(&port->lock);
-+	uart_port_lock(port);
- 
- 	mps2_uart_write8(port, UARTn_INT_RX, UARTn_INT);
- 	mps2_uart_rx_chars(port);
- 
--	spin_unlock(&port->lock);
-+	uart_port_unlock(port);
- 
- 	return IRQ_HANDLED;
- }
-@@ -206,12 +206,12 @@ static irqreturn_t mps2_uart_txirq(int i
- 	if (unlikely(!(irqflag & UARTn_INT_TX)))
- 		return IRQ_NONE;
- 
--	spin_lock(&port->lock);
-+	uart_port_lock(port);
- 
- 	mps2_uart_write8(port, UARTn_INT_TX, UARTn_INT);
- 	mps2_uart_tx_chars(port);
- 
--	spin_unlock(&port->lock);
-+	uart_port_unlock(port);
- 
- 	return IRQ_HANDLED;
- }
-@@ -222,7 +222,7 @@ static irqreturn_t mps2_uart_oerrirq(int
- 	struct uart_port *port = data;
- 	u8 irqflag = mps2_uart_read8(port, UARTn_INT);
- 
--	spin_lock(&port->lock);
-+	uart_port_lock(port);
- 
- 	if (irqflag & UARTn_INT_RX_OVERRUN) {
- 		struct tty_port *tport = &port->state->port;
-@@ -244,7 +244,7 @@ static irqreturn_t mps2_uart_oerrirq(int
- 		handled = IRQ_HANDLED;
- 	}
- 
--	spin_unlock(&port->lock);
-+	uart_port_unlock(port);
- 
- 	return handled;
- }
-@@ -356,12 +356,12 @@ mps2_uart_set_termios(struct uart_port *
- 
- 	bauddiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
- 
--	spin_lock_irqsave(&port->lock, flags);
-+	uart_port_lock_irqsave(port, &flags);
- 
- 	uart_update_timeout(port, termios->c_cflag, baud);
- 	mps2_uart_write32(port, bauddiv, UARTn_BAUDDIV);
- 
--	spin_unlock_irqrestore(&port->lock, flags);
-+	uart_port_unlock_irqrestore(port, flags);
- 
- 	if (tty_termios_baud_rate(termios))
- 		tty_termios_encode_baud_rate(termios, baud, baud);