summaryrefslogtreecommitdiffstats
path: root/debian/patches-rt/0048-serial-pxa-Use-port-lock-wrappers.patch
diff options
context:
space:
mode:
Diffstat (limited to 'debian/patches-rt/0048-serial-pxa-Use-port-lock-wrappers.patch')
-rw-r--r--debian/patches-rt/0048-serial-pxa-Use-port-lock-wrappers.patch150
1 files changed, 0 insertions, 150 deletions
diff --git a/debian/patches-rt/0048-serial-pxa-Use-port-lock-wrappers.patch b/debian/patches-rt/0048-serial-pxa-Use-port-lock-wrappers.patch
deleted file mode 100644
index b0df211b6f..0000000000
--- a/debian/patches-rt/0048-serial-pxa-Use-port-lock-wrappers.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From: Thomas Gleixner <tglx@linutronix.de>
-Date: Thu, 14 Sep 2023 20:44:05 +0206
-Subject: [PATCH 048/134] serial: pxa: Use port lock wrappers
-Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
-
-When a serial port is used for kernel console output, then all
-modifications to the UART registers which are done from other contexts,
-e.g. getty, termios, are interference points for the kernel console.
-
-So far this has been ignored and the printk output is based on the
-principle of hope. The rework of the console infrastructure which aims to
-support threaded and atomic consoles, requires to mark sections which
-modify the UART registers as unsafe. This allows the atomic write function
-to make informed decisions and eventually to restore operational state. It
-also allows to prevent the regular UART code from modifying UART registers
-while printk output is in progress.
-
-All modifications of UART registers are guarded by the UART port lock,
-which provides an obvious synchronization point with the console
-infrastructure.
-
-To avoid adding this functionality to all UART drivers, wrap the
-spin_[un]lock*() invocations for uart_port::lock into helper functions
-which just contain the spin_[un]lock*() invocations for now. In a
-subsequent step these helpers will gain the console synchronization
-mechanisms.
-
-Converted with coccinelle. No functional change.
-
-Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-Signed-off-by: John Ogness <john.ogness@linutronix.de>
-Link: https://lore.kernel.org/r/20230914183831.587273-49-john.ogness@linutronix.de
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
----
- drivers/tty/serial/pxa.c | 30 +++++++++++++++---------------
- 1 file changed, 15 insertions(+), 15 deletions(-)
-
---- a/drivers/tty/serial/pxa.c
-+++ b/drivers/tty/serial/pxa.c
-@@ -225,14 +225,14 @@ static inline irqreturn_t serial_pxa_irq
- iir = serial_in(up, UART_IIR);
- if (iir & UART_IIR_NO_INT)
- return IRQ_NONE;
-- spin_lock(&up->port.lock);
-+ uart_port_lock(&up->port);
- lsr = serial_in(up, UART_LSR);
- if (lsr & UART_LSR_DR)
- receive_chars(up, &lsr);
- check_modem_status(up);
- if (lsr & UART_LSR_THRE)
- transmit_chars(up);
-- spin_unlock(&up->port.lock);
-+ uart_port_unlock(&up->port);
- return IRQ_HANDLED;
- }
-
-@@ -242,9 +242,9 @@ static unsigned int serial_pxa_tx_empty(
- unsigned long flags;
- unsigned int ret;
-
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
-
- return ret;
- }
-@@ -295,13 +295,13 @@ static void serial_pxa_break_ctl(struct
- struct uart_pxa_port *up = (struct uart_pxa_port *)port;
- unsigned long flags;
-
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- if (break_state == -1)
- up->lcr |= UART_LCR_SBC;
- else
- up->lcr &= ~UART_LCR_SBC;
- serial_out(up, UART_LCR, up->lcr);
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
- }
-
- static int serial_pxa_startup(struct uart_port *port)
-@@ -346,10 +346,10 @@ static int serial_pxa_startup(struct uar
- */
- serial_out(up, UART_LCR, UART_LCR_WLEN8);
-
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- up->port.mctrl |= TIOCM_OUT2;
- serial_pxa_set_mctrl(&up->port, up->port.mctrl);
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
-
- /*
- * Finally, enable interrupts. Note: Modem status interrupts
-@@ -383,10 +383,10 @@ static void serial_pxa_shutdown(struct u
- up->ier = 0;
- serial_out(up, UART_IER, 0);
-
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- up->port.mctrl &= ~TIOCM_OUT2;
- serial_pxa_set_mctrl(&up->port, up->port.mctrl);
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
-
- /*
- * Disable break condition and FIFOs
-@@ -434,7 +434,7 @@ serial_pxa_set_termios(struct uart_port
- * Ok, we're now changing the port state. Do it with
- * interrupts disabled.
- */
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
-
- /*
- * Ensure the port will be enabled.
-@@ -504,7 +504,7 @@ serial_pxa_set_termios(struct uart_port
- up->lcr = cval; /* Save LCR */
- serial_pxa_set_mctrl(&up->port, up->port.mctrl);
- serial_out(up, UART_FCR, fcr);
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
- }
-
- static void
-@@ -608,9 +608,9 @@ serial_pxa_console_write(struct console
- if (up->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
-- locked = spin_trylock(&up->port.lock);
-+ locked = uart_port_trylock(&up->port);
- else
-- spin_lock(&up->port.lock);
-+ uart_port_lock(&up->port);
-
- /*
- * First save the IER then disable the interrupts
-@@ -628,7 +628,7 @@ serial_pxa_console_write(struct console
- serial_out(up, UART_IER, ier);
-
- if (locked)
-- spin_unlock(&up->port.lock);
-+ uart_port_unlock(&up->port);
- local_irq_restore(flags);
- clk_disable(up->clk);
-