diff options
Diffstat (limited to 'drivers/block/mtip32xx')
| -rw-r--r-- | drivers/block/mtip32xx/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/block/mtip32xx/Makefile | 6 | ||||
| -rw-r--r-- | drivers/block/mtip32xx/mtip32xx.c | 4089 | ||||
| -rw-r--r-- | drivers/block/mtip32xx/mtip32xx.h | 467 |
4 files changed, 4572 insertions, 0 deletions
diff --git a/drivers/block/mtip32xx/Kconfig b/drivers/block/mtip32xx/Kconfig new file mode 100644 index 0000000000..bf22135856 --- /dev/null +++ b/drivers/block/mtip32xx/Kconfig @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# mtip32xx device driver configuration +# + +config BLK_DEV_PCIESSD_MTIP32XX + tristate "Block Device Driver for Micron PCIe SSDs" + depends on PCI + help + This enables the block driver for Micron PCIe SSDs. diff --git a/drivers/block/mtip32xx/Makefile b/drivers/block/mtip32xx/Makefile new file mode 100644 index 0000000000..bff32b5d3c --- /dev/null +++ b/drivers/block/mtip32xx/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for Block device driver for Micron PCIe SSD +# + +obj-$(CONFIG_BLK_DEV_PCIESSD_MTIP32XX) += mtip32xx.o diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c new file mode 100644 index 0000000000..b200950e8f --- /dev/null +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -0,0 +1,4089 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for the Micron P320 SSD + * Copyright (C) 2011 Micron Technology, Inc. + * + * Portions of this code were derived from works subjected to the + * following copyright: + * Copyright (C) 2009 Integrated Device Technology, Inc. + */ + +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/ata.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/uaccess.h> +#include <linux/random.h> +#include <linux/smp.h> +#include <linux/compat.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/blkdev.h> +#include <linux/blk-mq.h> +#include <linux/bio.h> +#include <linux/dma-mapping.h> +#include <linux/idr.h> +#include <linux/kthread.h> +#include <../drivers/ata/ahci.h> +#include <linux/export.h> +#include <linux/debugfs.h> +#include <linux/prefetch.h> +#include <linux/numa.h> +#include "mtip32xx.h" + +#define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32) + +/* DMA region containing RX Fis, Identify, RLE10, and SMART buffers */ +#define AHCI_RX_FIS_SZ 0x100 +#define AHCI_RX_FIS_OFFSET 0x0 +#define AHCI_IDFY_SZ ATA_SECT_SIZE +#define AHCI_IDFY_OFFSET 0x400 +#define AHCI_SECTBUF_SZ ATA_SECT_SIZE +#define AHCI_SECTBUF_OFFSET 0x800 +#define AHCI_SMARTBUF_SZ ATA_SECT_SIZE +#define AHCI_SMARTBUF_OFFSET 0xC00 +/* 0x100 + 0x200 + 0x200 + 0x200 is smaller than 4k but we pad it out */ +#define BLOCK_DMA_ALLOC_SZ 4096 + +/* DMA region containing command table (should be 8192 bytes) */ +#define AHCI_CMD_SLOT_SZ sizeof(struct mtip_cmd_hdr) +#define AHCI_CMD_TBL_SZ (MTIP_MAX_COMMAND_SLOTS * AHCI_CMD_SLOT_SZ) +#define AHCI_CMD_TBL_OFFSET 0x0 + +/* DMA region per command (contains header and SGL) */ +#define AHCI_CMD_TBL_HDR_SZ 0x80 +#define AHCI_CMD_TBL_HDR_OFFSET 0x0 +#define AHCI_CMD_TBL_SGL_SZ (MTIP_MAX_SG * sizeof(struct mtip_cmd_sg)) +#define AHCI_CMD_TBL_SGL_OFFSET AHCI_CMD_TBL_HDR_SZ +#define CMD_DMA_ALLOC_SZ (AHCI_CMD_TBL_SGL_SZ + AHCI_CMD_TBL_HDR_SZ) + + +#define HOST_CAP_NZDMA (1 << 19) +#define HOST_HSORG 0xFC +#define HSORG_DISABLE_SLOTGRP_INTR (1<<24) +#define HSORG_DISABLE_SLOTGRP_PXIS (1<<16) +#define HSORG_HWREV 0xFF00 +#define HSORG_STYLE 0x8 +#define HSORG_SLOTGROUPS 0x7 + +#define PORT_COMMAND_ISSUE 0x38 +#define PORT_SDBV 0x7C + +#define PORT_OFFSET 0x100 +#define PORT_MEM_SIZE 0x80 + +#define PORT_IRQ_ERR \ + (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | PORT_IRQ_CONNECT | \ + PORT_IRQ_PHYRDY | PORT_IRQ_UNK_FIS | PORT_IRQ_BAD_PMP | \ + PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_NONFATAL | \ + PORT_IRQ_OVERFLOW) +#define PORT_IRQ_LEGACY \ + (PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) +#define PORT_IRQ_HANDLED \ + (PORT_IRQ_SDB_FIS | PORT_IRQ_LEGACY | \ + PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR | \ + PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY) +#define DEF_PORT_IRQ \ + (PORT_IRQ_ERR | PORT_IRQ_LEGACY | PORT_IRQ_SDB_FIS) + +/* product numbers */ +#define MTIP_PRODUCT_UNKNOWN 0x00 +#define MTIP_PRODUCT_ASICFPGA 0x11 + +/* Device instance number, incremented each time a device is probed. */ +static int instance; + +/* + * Global variable used to hold the major block device number + * allocated in mtip_init(). + */ +static int mtip_major; +static struct dentry *dfs_parent; + +static u32 cpu_use[NR_CPUS]; + +static DEFINE_IDA(rssd_index_ida); + +static int mtip_block_initialize(struct driver_data *dd); + +#ifdef CONFIG_COMPAT +struct mtip_compat_ide_task_request_s { + __u8 io_ports[8]; + __u8 hob_ports[8]; + ide_reg_valid_t out_flags; + ide_reg_valid_t in_flags; + int data_phase; + int req_cmd; + compat_ulong_t out_size; + compat_ulong_t in_size; +}; +#endif + +/* + * This function check_for_surprise_removal is called + * while card is removed from the system and it will + * read the vendor id from the configuration space + * + * @pdev Pointer to the pci_dev structure. + * + * return value + * true if device removed, else false + */ +static bool mtip_check_surprise_removal(struct driver_data *dd) +{ + u16 vendor_id = 0; + + if (dd->sr) + return true; + + /* Read the vendorID from the configuration space */ + pci_read_config_word(dd->pdev, 0x00, &vendor_id); + if (vendor_id == 0xFFFF) { + dd->sr = true; + if (dd->disk) + blk_mark_disk_dead(dd->disk); + return true; /* device removed */ + } + + return false; /* device present */ +} + +static struct mtip_cmd *mtip_cmd_from_tag(struct driver_data *dd, + unsigned int tag) +{ + return blk_mq_rq_to_pdu(blk_mq_tag_to_rq(dd->tags.tags[0], tag)); +} + +/* + * Reset the HBA (without sleeping) + * + * @dd Pointer to the driver data structure. + * + * return value + * 0 The reset was successful. + * -1 The HBA Reset bit did not clear. + */ +static int mtip_hba_reset(struct driver_data *dd) +{ + unsigned long timeout; + + /* Set the reset bit */ + writel(HOST_RESET, dd->mmio + HOST_CTL); + + /* Flush */ + readl(dd->mmio + HOST_CTL); + + /* + * Spin for up to 10 seconds waiting for reset acknowledgement. Spec + * is 1 sec but in LUN failure conditions, up to 10 secs are required + */ + timeout = jiffies + msecs_to_jiffies(10000); + do { + mdelay(10); + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) + return -1; + + } while ((readl(dd->mmio + HOST_CTL) & HOST_RESET) + && time_before(jiffies, timeout)); + + if (readl(dd->mmio + HOST_CTL) & HOST_RESET) + return -1; + + return 0; +} + +/* + * Issue a command to the hardware. + * + * Set the appropriate bit in the s_active and Command Issue hardware + * registers, causing hardware command processing to begin. + * + * @port Pointer to the port structure. + * @tag The tag of the command to be issued. + * + * return value + * None + */ +static inline void mtip_issue_ncq_command(struct mtip_port *port, int tag) +{ + int group = tag >> 5; + + /* guard SACT and CI registers */ + spin_lock(&port->cmd_issue_lock[group]); + writel((1 << MTIP_TAG_BIT(tag)), + port->s_active[MTIP_TAG_INDEX(tag)]); + writel((1 << MTIP_TAG_BIT(tag)), + port->cmd_issue[MTIP_TAG_INDEX(tag)]); + spin_unlock(&port->cmd_issue_lock[group]); +} + +/* + * Enable/disable the reception of FIS + * + * @port Pointer to the port data structure + * @enable 1 to enable, 0 to disable + * + * return value + * Previous state: 1 enabled, 0 disabled + */ +static int mtip_enable_fis(struct mtip_port *port, int enable) +{ + u32 tmp; + + /* enable FIS reception */ + tmp = readl(port->mmio + PORT_CMD); + if (enable) + writel(tmp | PORT_CMD_FIS_RX, port->mmio + PORT_CMD); + else + writel(tmp & ~PORT_CMD_FIS_RX, port->mmio + PORT_CMD); + + /* Flush */ + readl(port->mmio + PORT_CMD); + + return (((tmp & PORT_CMD_FIS_RX) == PORT_CMD_FIS_RX)); +} + +/* + * Enable/disable the DMA engine + * + * @port Pointer to the port data structure + * @enable 1 to enable, 0 to disable + * + * return value + * Previous state: 1 enabled, 0 disabled. + */ +static int mtip_enable_engine(struct mtip_port *port, int enable) +{ + u32 tmp; + + /* enable FIS reception */ + tmp = readl(port->mmio + PORT_CMD); + if (enable) + writel(tmp | PORT_CMD_START, port->mmio + PORT_CMD); + else + writel(tmp & ~PORT_CMD_START, port->mmio + PORT_CMD); + + readl(port->mmio + PORT_CMD); + return (((tmp & PORT_CMD_START) == PORT_CMD_START)); +} + +/* + * Enables the port DMA engine and FIS reception. + * + * return value + * None + */ +static inline void mtip_start_port(struct mtip_port *port) +{ + /* Enable FIS reception */ + mtip_enable_fis(port, 1); + + /* Enable the DMA engine */ + mtip_enable_engine(port, 1); +} + +/* + * Deinitialize a port by disabling port interrupts, the DMA engine, + * and FIS reception. + * + * @port Pointer to the port structure + * + * return value + * None + */ +static inline void mtip_deinit_port(struct mtip_port *port) +{ + /* Disable interrupts on this port */ + writel(0, port->mmio + PORT_IRQ_MASK); + + /* Disable the DMA engine */ + mtip_enable_engine(port, 0); + + /* Disable FIS reception */ + mtip_enable_fis(port, 0); +} + +/* + * Initialize a port. + * + * This function deinitializes the port by calling mtip_deinit_port() and + * then initializes it by setting the command header and RX FIS addresses, + * clearing the SError register and any pending port interrupts before + * re-enabling the default set of port interrupts. + * + * @port Pointer to the port structure. + * + * return value + * None + */ +static void mtip_init_port(struct mtip_port *port) +{ + int i; + mtip_deinit_port(port); + + /* Program the command list base and FIS base addresses */ + if (readl(port->dd->mmio + HOST_CAP) & HOST_CAP_64) { + writel((port->command_list_dma >> 16) >> 16, + port->mmio + PORT_LST_ADDR_HI); + writel((port->rxfis_dma >> 16) >> 16, + port->mmio + PORT_FIS_ADDR_HI); + set_bit(MTIP_PF_HOST_CAP_64, &port->flags); + } + + writel(port->command_list_dma & 0xFFFFFFFF, + port->mmio + PORT_LST_ADDR); + writel(port->rxfis_dma & 0xFFFFFFFF, port->mmio + PORT_FIS_ADDR); + + /* Clear SError */ + writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR); + + /* reset the completed registers.*/ + for (i = 0; i < port->dd->slot_groups; i++) + writel(0xFFFFFFFF, port->completed[i]); + + /* Clear any pending interrupts for this port */ + writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT); + + /* Clear any pending interrupts on the HBA. */ + writel(readl(port->dd->mmio + HOST_IRQ_STAT), + port->dd->mmio + HOST_IRQ_STAT); + + /* Enable port interrupts */ + writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK); +} + +/* + * Restart a port + * + * @port Pointer to the port data structure. + * + * return value + * None + */ +static void mtip_restart_port(struct mtip_port *port) +{ + unsigned long timeout; + + /* Disable the DMA engine */ + mtip_enable_engine(port, 0); + + /* Chip quirk: wait up to 500ms for PxCMD.CR == 0 */ + timeout = jiffies + msecs_to_jiffies(500); + while ((readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON) + && time_before(jiffies, timeout)) + ; + + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + return; + + /* + * Chip quirk: escalate to hba reset if + * PxCMD.CR not clear after 500 ms + */ + if (readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON) { + dev_warn(&port->dd->pdev->dev, + "PxCMD.CR not clear, escalating reset\n"); + + if (mtip_hba_reset(port->dd)) + dev_err(&port->dd->pdev->dev, + "HBA reset escalation failed.\n"); + + /* 30 ms delay before com reset to quiesce chip */ + mdelay(30); + } + + dev_warn(&port->dd->pdev->dev, "Issuing COM reset\n"); + + /* Set PxSCTL.DET */ + writel(readl(port->mmio + PORT_SCR_CTL) | + 1, port->mmio + PORT_SCR_CTL); + readl(port->mmio + PORT_SCR_CTL); + + /* Wait 1 ms to quiesce chip function */ + timeout = jiffies + msecs_to_jiffies(1); + while (time_before(jiffies, timeout)) + ; + + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + return; + + /* Clear PxSCTL.DET */ + writel(readl(port->mmio + PORT_SCR_CTL) & ~1, + port->mmio + PORT_SCR_CTL); + readl(port->mmio + PORT_SCR_CTL); + + /* Wait 500 ms for bit 0 of PORT_SCR_STS to be set */ + timeout = jiffies + msecs_to_jiffies(500); + while (((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0) + && time_before(jiffies, timeout)) + ; + + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + return; + + if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0) + dev_warn(&port->dd->pdev->dev, + "COM reset failed\n"); + + mtip_init_port(port); + mtip_start_port(port); + +} + +static int mtip_device_reset(struct driver_data *dd) +{ + int rv = 0; + + if (mtip_check_surprise_removal(dd)) + return 0; + + if (mtip_hba_reset(dd) < 0) + rv = -EFAULT; + + mdelay(1); + mtip_init_port(dd->port); + mtip_start_port(dd->port); + + /* Enable interrupts on the HBA. */ + writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, + dd->mmio + HOST_CTL); + return rv; +} + +/* + * Helper function for tag logging + */ +static void print_tags(struct driver_data *dd, + char *msg, + unsigned long *tagbits, + int cnt) +{ + unsigned char tagmap[128]; + int group, tagmap_len = 0; + + memset(tagmap, 0, sizeof(tagmap)); + for (group = SLOTBITS_IN_LONGS; group > 0; group--) + tagmap_len += sprintf(tagmap + tagmap_len, "%016lX ", + tagbits[group-1]); + dev_warn(&dd->pdev->dev, + "%d command(s) %s: tagmap [%s]", cnt, msg, tagmap); +} + +static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer, + dma_addr_t buffer_dma, unsigned int sectors); +static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, + struct smart_attr *attrib); + +static void mtip_complete_command(struct mtip_cmd *cmd, blk_status_t status) +{ + struct request *req = blk_mq_rq_from_pdu(cmd); + + cmd->status = status; + if (likely(!blk_should_fake_timeout(req->q))) + blk_mq_complete_request(req); +} + +/* + * Handle an error. + * + * @dd Pointer to the DRIVER_DATA structure. + * + * return value + * None + */ +static void mtip_handle_tfe(struct driver_data *dd) +{ + int group, tag, bit, reissue, rv; + struct mtip_port *port; + struct mtip_cmd *cmd; + u32 completed; + struct host_to_dev_fis *fis; + unsigned long tagaccum[SLOTBITS_IN_LONGS]; + unsigned int cmd_cnt = 0; + unsigned char *buf; + char *fail_reason = NULL; + int fail_all_ncq_write = 0, fail_all_ncq_cmds = 0; + + dev_warn(&dd->pdev->dev, "Taskfile error\n"); + + port = dd->port; + + if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) { + cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL); + dbg_printk(MTIP_DRV_NAME " TFE for the internal command\n"); + mtip_complete_command(cmd, BLK_STS_IOERR); + return; + } + + /* clear the tag accumulator */ + memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); + + /* Loop through all the groups */ + for (group = 0; group < dd->slot_groups; group++) { + completed = readl(port->completed[group]); + + dev_warn(&dd->pdev->dev, "g=%u, comp=%x\n", group, completed); + + /* clear completed status register in the hardware.*/ + writel(completed, port->completed[group]); + + /* Process successfully completed commands */ + for (bit = 0; bit < 32 && completed; bit++) { + if (!(completed & (1<<bit))) + continue; + tag = (group << 5) + bit; + + /* Skip the internal command slot */ + if (tag == MTIP_TAG_INTERNAL) + continue; + + cmd = mtip_cmd_from_tag(dd, tag); + mtip_complete_command(cmd, 0); + set_bit(tag, tagaccum); + cmd_cnt++; + } + } + + print_tags(dd, "completed (TFE)", tagaccum, cmd_cnt); + + /* Restart the port */ + mdelay(20); + mtip_restart_port(port); + + /* Trying to determine the cause of the error */ + rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ, + dd->port->log_buf, + dd->port->log_buf_dma, 1); + if (rv) { + dev_warn(&dd->pdev->dev, + "Error in READ LOG EXT (10h) command\n"); + /* non-critical error, don't fail the load */ + } else { + buf = (unsigned char *)dd->port->log_buf; + if (buf[259] & 0x1) { + dev_info(&dd->pdev->dev, + "Write protect bit is set.\n"); + set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag); + fail_all_ncq_write = 1; + fail_reason = "write protect"; + } + if (buf[288] == 0xF7) { + dev_info(&dd->pdev->dev, + "Exceeded Tmax, drive in thermal shutdown.\n"); + set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag); + fail_all_ncq_cmds = 1; + fail_reason = "thermal shutdown"; + } + if (buf[288] == 0xBF) { + set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag); + dev_info(&dd->pdev->dev, + "Drive indicates rebuild has failed. Secure erase required.\n"); + fail_all_ncq_cmds = 1; + fail_reason = "rebuild failed"; + } + } + + /* clear the tag accumulator */ + memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); + + /* Loop through all the groups */ + for (group = 0; group < dd->slot_groups; group++) { + for (bit = 0; bit < 32; bit++) { + reissue = 1; + tag = (group << 5) + bit; + cmd = mtip_cmd_from_tag(dd, tag); + + fis = (struct host_to_dev_fis *)cmd->command; + + /* Should re-issue? */ + if (tag == MTIP_TAG_INTERNAL || + fis->command == ATA_CMD_SET_FEATURES) + reissue = 0; + else { + if (fail_all_ncq_cmds || + (fail_all_ncq_write && + fis->command == ATA_CMD_FPDMA_WRITE)) { + dev_warn(&dd->pdev->dev, + " Fail: %s w/tag %d [%s].\n", + fis->command == ATA_CMD_FPDMA_WRITE ? + "write" : "read", + tag, + fail_reason != NULL ? + fail_reason : "unknown"); + mtip_complete_command(cmd, BLK_STS_MEDIUM); + continue; + } + } + + /* + * First check if this command has + * exceeded its retries. + */ + if (reissue && (cmd->retries-- > 0)) { + + set_bit(tag, tagaccum); + + /* Re-issue the command. */ + mtip_issue_ncq_command(port, tag); + + continue; + } + + /* Retire a command that will not be reissued */ + dev_warn(&port->dd->pdev->dev, + "retiring tag %d\n", tag); + + mtip_complete_command(cmd, BLK_STS_IOERR); + } + } + print_tags(dd, "reissued (TFE)", tagaccum, cmd_cnt); +} + +/* + * Handle a set device bits interrupt + */ +static inline void mtip_workq_sdbfx(struct mtip_port *port, int group, + u32 completed) +{ + struct driver_data *dd = port->dd; + int tag, bit; + struct mtip_cmd *command; + + if (!completed) { + WARN_ON_ONCE(!completed); + return; + } + /* clear completed status register in the hardware.*/ + writel(completed, port->completed[group]); + + /* Process completed commands. */ + for (bit = 0; (bit < 32) && completed; bit++) { + if (completed & 0x01) { + tag = (group << 5) | bit; + + /* skip internal command slot. */ + if (unlikely(tag == MTIP_TAG_INTERNAL)) + continue; + + command = mtip_cmd_from_tag(dd, tag); + mtip_complete_command(command, 0); + } + completed >>= 1; + } + + /* If last, re-enable interrupts */ + if (atomic_dec_return(&dd->irq_workers_active) == 0) + writel(0xffffffff, dd->mmio + HOST_IRQ_STAT); +} + +/* + * Process legacy pio and d2h interrupts + */ +static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat) +{ + struct mtip_port *port = dd->port; + struct mtip_cmd *cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL); + + if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) && cmd) { + int group = MTIP_TAG_INDEX(MTIP_TAG_INTERNAL); + int status = readl(port->cmd_issue[group]); + + if (!(status & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL)))) + mtip_complete_command(cmd, 0); + } +} + +/* + * Demux and handle errors + */ +static inline void mtip_process_errors(struct driver_data *dd, u32 port_stat) +{ + if (unlikely(port_stat & PORT_IRQ_CONNECT)) { + dev_warn(&dd->pdev->dev, + "Clearing PxSERR.DIAG.x\n"); + writel((1 << 26), dd->port->mmio + PORT_SCR_ERR); + } + + if (unlikely(port_stat & PORT_IRQ_PHYRDY)) { + dev_warn(&dd->pdev->dev, + "Clearing PxSERR.DIAG.n\n"); + writel((1 << 16), dd->port->mmio + PORT_SCR_ERR); + } + + if (unlikely(port_stat & ~PORT_IRQ_HANDLED)) { + dev_warn(&dd->pdev->dev, + "Port stat errors %x unhandled\n", + (port_stat & ~PORT_IRQ_HANDLED)); + if (mtip_check_surprise_removal(dd)) + return; + } + if (likely(port_stat & (PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR))) { + set_bit(MTIP_PF_EH_ACTIVE_BIT, &dd->port->flags); + wake_up_interruptible(&dd->port->svc_wait); + } +} + +static inline irqreturn_t mtip_handle_irq(struct driver_data *data) +{ + struct driver_data *dd = (struct driver_data *) data; + struct mtip_port *port = dd->port; + u32 hba_stat, port_stat; + int rv = IRQ_NONE; + int do_irq_enable = 1, i, workers; + struct mtip_work *twork; + + hba_stat = readl(dd->mmio + HOST_IRQ_STAT); + if (hba_stat) { + rv = IRQ_HANDLED; + + /* Acknowledge the interrupt status on the port.*/ + port_stat = readl(port->mmio + PORT_IRQ_STAT); + if (unlikely(port_stat == 0xFFFFFFFF)) { + mtip_check_surprise_removal(dd); + return IRQ_HANDLED; + } + writel(port_stat, port->mmio + PORT_IRQ_STAT); + + /* Demux port status */ + if (likely(port_stat & PORT_IRQ_SDB_FIS)) { + do_irq_enable = 0; + WARN_ON_ONCE(atomic_read(&dd->irq_workers_active) != 0); + + /* Start at 1: group zero is always local? */ + for (i = 0, workers = 0; i < MTIP_MAX_SLOT_GROUPS; + i++) { + twork = &dd->work[i]; + twork->completed = readl(port->completed[i]); + if (twork->completed) + workers++; + } + + atomic_set(&dd->irq_workers_active, workers); + if (workers) { + for (i = 1; i < MTIP_MAX_SLOT_GROUPS; i++) { + twork = &dd->work[i]; + if (twork->completed) + queue_work_on( + twork->cpu_binding, + dd->isr_workq, + &twork->work); + } + + if (likely(dd->work[0].completed)) + mtip_workq_sdbfx(port, 0, + dd->work[0].completed); + + } else { + /* + * Chip quirk: SDB interrupt but nothing + * to complete + */ + do_irq_enable = 1; + } + } + + if (unlikely(port_stat & PORT_IRQ_ERR)) { + if (unlikely(mtip_check_surprise_removal(dd))) { + /* don't proceed further */ + return IRQ_HANDLED; + } + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, + &dd->dd_flag)) + return rv; + + mtip_process_errors(dd, port_stat & PORT_IRQ_ERR); + } + + if (unlikely(port_stat & PORT_IRQ_LEGACY)) + mtip_process_legacy(dd, port_stat & PORT_IRQ_LEGACY); + } + + /* acknowledge interrupt */ + if (unlikely(do_irq_enable)) + writel(hba_stat, dd->mmio + HOST_IRQ_STAT); + + return rv; +} + +/* + * HBA interrupt subroutine. + * + * @irq IRQ number. + * @instance Pointer to the driver data structure. + * + * return value + * IRQ_HANDLED A HBA interrupt was pending and handled. + * IRQ_NONE This interrupt was not for the HBA. + */ +static irqreturn_t mtip_irq_handler(int irq, void *instance) +{ + struct driver_data *dd = instance; + + return mtip_handle_irq(dd); +} + +static void mtip_issue_non_ncq_command(struct mtip_port *port, int tag) +{ + writel(1 << MTIP_TAG_BIT(tag), port->cmd_issue[MTIP_TAG_INDEX(tag)]); +} + +static bool mtip_pause_ncq(struct mtip_port *port, + struct host_to_dev_fis *fis) +{ + unsigned long task_file_data; + + task_file_data = readl(port->mmio+PORT_TFDATA); + if ((task_file_data & 1)) + return false; + + if (fis->command == ATA_CMD_SEC_ERASE_PREP) { + port->ic_pause_timer = jiffies; + return true; + } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) && + (fis->features == 0x03)) { + set_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); + port->ic_pause_timer = jiffies; + return true; + } else if ((fis->command == ATA_CMD_SEC_ERASE_UNIT) || + ((fis->command == 0xFC) && + (fis->features == 0x27 || fis->features == 0x72 || + fis->features == 0x62 || fis->features == 0x26))) { + clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); + clear_bit(MTIP_DDF_REBUILD_FAILED_BIT, &port->dd->dd_flag); + /* Com reset after secure erase or lowlevel format */ + mtip_restart_port(port); + clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + return false; + } + + return false; +} + +static bool mtip_commands_active(struct mtip_port *port) +{ + unsigned int active; + unsigned int n; + + /* + * Ignore s_active bit 0 of array element 0. + * This bit will always be set + */ + active = readl(port->s_active[0]) & 0xFFFFFFFE; + for (n = 1; n < port->dd->slot_groups; n++) + active |= readl(port->s_active[n]); + + return active != 0; +} + +/* + * Wait for port to quiesce + * + * @port Pointer to port data structure + * @timeout Max duration to wait (ms) + * + * return value + * 0 Success + * -EBUSY Commands still active + */ +static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout) +{ + unsigned long to; + bool active = true; + + blk_mq_quiesce_queue(port->dd->queue); + + to = jiffies + msecs_to_jiffies(timeout); + do { + if (test_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags) && + test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) { + msleep(20); + continue; /* svc thd is actively issuing commands */ + } + + msleep(100); + + if (mtip_check_surprise_removal(port->dd)) + goto err_fault; + + active = mtip_commands_active(port); + if (!active) + break; + } while (time_before(jiffies, to)); + + blk_mq_unquiesce_queue(port->dd->queue); + return active ? -EBUSY : 0; +err_fault: + blk_mq_unquiesce_queue(port->dd->queue); + return -EFAULT; +} + +struct mtip_int_cmd { + int fis_len; + dma_addr_t buffer; + int buf_len; + u32 opts; +}; + +/* + * Execute an internal command and wait for the completion. + * + * @port Pointer to the port data structure. + * @fis Pointer to the FIS that describes the command. + * @fis_len Length in WORDS of the FIS. + * @buffer DMA accessible for command data. + * @buf_len Length, in bytes, of the data buffer. + * @opts Command header options, excluding the FIS length + * and the number of PRD entries. + * @timeout Time in ms to wait for the command to complete. + * + * return value + * 0 Command completed successfully. + * -EFAULT The buffer address is not correctly aligned. + * -EBUSY Internal command or other IO in progress. + * -EAGAIN Time out waiting for command to complete. + */ +static int mtip_exec_internal_command(struct mtip_port *port, + struct host_to_dev_fis *fis, + int fis_len, + dma_addr_t buffer, + int buf_len, + u32 opts, + unsigned long timeout) +{ + struct mtip_cmd *int_cmd; + struct driver_data *dd = port->dd; + struct request *rq; + struct mtip_int_cmd icmd = { + .fis_len = fis_len, + .buffer = buffer, + .buf_len = buf_len, + .opts = opts + }; + int rv = 0; + + /* Make sure the buffer is 8 byte aligned. This is asic specific. */ + if (buffer & 0x00000007) { + dev_err(&dd->pdev->dev, "SG buffer is not 8 byte aligned\n"); + return -EFAULT; + } + + if (mtip_check_surprise_removal(dd)) + return -EFAULT; + + rq = blk_mq_alloc_request(dd->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_RESERVED); + if (IS_ERR(rq)) { + dbg_printk(MTIP_DRV_NAME "Unable to allocate tag for PIO cmd\n"); + return -EFAULT; + } + + set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); + + if (fis->command == ATA_CMD_SEC_ERASE_PREP) + set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + + clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); + + if (fis->command != ATA_CMD_STANDBYNOW1) { + /* wait for io to complete if non atomic */ + if (mtip_quiesce_io(port, MTIP_QUIESCE_IO_TIMEOUT_MS) < 0) { + dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n"); + blk_mq_free_request(rq); + clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); + wake_up_interruptible(&port->svc_wait); + return -EBUSY; + } + } + + /* Copy the command to the command table */ + int_cmd = blk_mq_rq_to_pdu(rq); + int_cmd->icmd = &icmd; + memcpy(int_cmd->command, fis, fis_len*4); + + rq->timeout = timeout; + + /* insert request and run queue */ + blk_execute_rq(rq, true); + + if (int_cmd->status) { + dev_err(&dd->pdev->dev, "Internal command [%02X] failed %d\n", + fis->command, int_cmd->status); + rv = -EIO; + + if (mtip_check_surprise_removal(dd) || + test_bit(MTIP_DDF_REMOVE_PENDING_BIT, + &dd->dd_flag)) { + dev_err(&dd->pdev->dev, + "Internal command [%02X] wait returned due to SR\n", + fis->command); + rv = -ENXIO; + goto exec_ic_exit; + } + mtip_device_reset(dd); /* recover from timeout issue */ + rv = -EAGAIN; + goto exec_ic_exit; + } + + if (readl(port->cmd_issue[MTIP_TAG_INDEX(MTIP_TAG_INTERNAL)]) + & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL))) { + rv = -ENXIO; + if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { + mtip_device_reset(dd); + rv = -EAGAIN; + } + } +exec_ic_exit: + /* Clear the allocated and active bits for the internal command. */ + blk_mq_free_request(rq); + clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); + if (rv >= 0 && mtip_pause_ncq(port, fis)) { + /* NCQ paused */ + return rv; + } + wake_up_interruptible(&port->svc_wait); + + return rv; +} + +/* + * Byte-swap ATA ID strings. + * + * ATA identify data contains strings in byte-swapped 16-bit words. + * They must be swapped (on all architectures) to be usable as C strings. + * This function swaps bytes in-place. + * + * @buf The buffer location of the string + * @len The number of bytes to swap + * + * return value + * None + */ +static inline void ata_swap_string(u16 *buf, unsigned int len) +{ + int i; + for (i = 0; i < (len/2); i++) + be16_to_cpus(&buf[i]); +} + +static void mtip_set_timeout(struct driver_data *dd, + struct host_to_dev_fis *fis, + unsigned int *timeout, u8 erasemode) +{ + switch (fis->command) { + case ATA_CMD_DOWNLOAD_MICRO: + *timeout = 120000; /* 2 minutes */ + break; + case ATA_CMD_SEC_ERASE_UNIT: + case 0xFC: + if (erasemode) + *timeout = ((*(dd->port->identify + 90) * 2) * 60000); + else + *timeout = ((*(dd->port->identify + 89) * 2) * 60000); + break; + case ATA_CMD_STANDBYNOW1: + *timeout = 120000; /* 2 minutes */ + break; + case 0xF7: + case 0xFA: + *timeout = 60000; /* 60 seconds */ + break; + case ATA_CMD_SMART: + *timeout = 15000; /* 15 seconds */ + break; + default: + *timeout = MTIP_IOCTL_CMD_TIMEOUT_MS; + break; + } +} + +/* + * Request the device identity information. + * + * If a user space buffer is not specified, i.e. is NULL, the + * identify information is still read from the drive and placed + * into the identify data buffer (@e port->identify) in the + * port data structure. + * When the identify buffer contains valid identify information @e + * port->identify_valid is non-zero. + * + * @port Pointer to the port structure. + * @user_buffer A user space buffer where the identify data should be + * copied. + * + * return value + * 0 Command completed successfully. + * -EFAULT An error occurred while coping data to the user buffer. + * -1 Command failed. + */ +static int mtip_get_identify(struct mtip_port *port, void __user *user_buffer) +{ + int rv = 0; + struct host_to_dev_fis fis; + + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + return -EFAULT; + + /* Build the FIS. */ + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + fis.type = 0x27; + fis.opts = 1 << 7; + fis.command = ATA_CMD_ID_ATA; + + /* Set the identify information as invalid. */ + port->identify_valid = 0; + + /* Clear the identify information. */ + memset(port->identify, 0, sizeof(u16) * ATA_ID_WORDS); + + /* Execute the command. */ + if (mtip_exec_internal_command(port, + &fis, + 5, + port->identify_dma, + sizeof(u16) * ATA_ID_WORDS, + 0, + MTIP_INT_CMD_TIMEOUT_MS) + < 0) { + rv = -1; + goto out; + } + + /* + * Perform any necessary byte-swapping. Yes, the kernel does in fact + * perform field-sensitive swapping on the string fields. + * See the kernel use of ata_id_string() for proof of this. + */ +#ifdef __LITTLE_ENDIAN + ata_swap_string(port->identify + 27, 40); /* model string*/ + ata_swap_string(port->identify + 23, 8); /* firmware string*/ + ata_swap_string(port->identify + 10, 20); /* serial# string*/ +#else + { + int i; + for (i = 0; i < ATA_ID_WORDS; i++) + port->identify[i] = le16_to_cpu(port->identify[i]); + } +#endif + + /* Check security locked state */ + if (port->identify[128] & 0x4) + set_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); + else + clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); + + /* Set the identify buffer as valid. */ + port->identify_valid = 1; + + if (user_buffer) { + if (copy_to_user( + user_buffer, + port->identify, + ATA_ID_WORDS * sizeof(u16))) { + rv = -EFAULT; + goto out; + } + } + +out: + return rv; +} + +/* + * Issue a standby immediate command to the device. + * + * @port Pointer to the port structure. + * + * return value + * 0 Command was executed successfully. + * -1 An error occurred while executing the command. + */ +static int mtip_standby_immediate(struct mtip_port *port) +{ + int rv; + struct host_to_dev_fis fis; + unsigned long __maybe_unused start; + unsigned int timeout; + + /* Build the FIS. */ + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + fis.type = 0x27; + fis.opts = 1 << 7; + fis.command = ATA_CMD_STANDBYNOW1; + + mtip_set_timeout(port->dd, &fis, &timeout, 0); + + start = jiffies; + rv = mtip_exec_internal_command(port, + &fis, + 5, + 0, + 0, + 0, + timeout); + dbg_printk(MTIP_DRV_NAME "Time taken to complete standby cmd: %d ms\n", + jiffies_to_msecs(jiffies - start)); + if (rv) + dev_warn(&port->dd->pdev->dev, + "STANDBY IMMEDIATE command failed.\n"); + + return rv; +} + +/* + * Issue a READ LOG EXT command to the device. + * + * @port pointer to the port structure. + * @page page number to fetch + * @buffer pointer to buffer + * @buffer_dma dma address corresponding to @buffer + * @sectors page length to fetch, in sectors + * + * return value + * @rv return value from mtip_exec_internal_command() + */ +static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer, + dma_addr_t buffer_dma, unsigned int sectors) +{ + struct host_to_dev_fis fis; + + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + fis.type = 0x27; + fis.opts = 1 << 7; + fis.command = ATA_CMD_READ_LOG_EXT; + fis.sect_count = sectors & 0xFF; + fis.sect_cnt_ex = (sectors >> 8) & 0xFF; + fis.lba_low = page; + fis.lba_mid = 0; + fis.device = ATA_DEVICE_OBS; + + memset(buffer, 0, sectors * ATA_SECT_SIZE); + + return mtip_exec_internal_command(port, + &fis, + 5, + buffer_dma, + sectors * ATA_SECT_SIZE, + 0, + MTIP_INT_CMD_TIMEOUT_MS); +} + +/* + * Issue a SMART READ DATA command to the device. + * + * @port pointer to the port structure. + * @buffer pointer to buffer + * @buffer_dma dma address corresponding to @buffer + * + * return value + * @rv return value from mtip_exec_internal_command() + */ +static int mtip_get_smart_data(struct mtip_port *port, u8 *buffer, + dma_addr_t buffer_dma) +{ + struct host_to_dev_fis fis; + + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + fis.type = 0x27; + fis.opts = 1 << 7; + fis.command = ATA_CMD_SMART; + fis.features = 0xD0; + fis.sect_count = 1; + fis.lba_mid = 0x4F; + fis.lba_hi = 0xC2; + fis.device = ATA_DEVICE_OBS; + + return mtip_exec_internal_command(port, + &fis, + 5, + buffer_dma, + ATA_SECT_SIZE, + 0, + 15000); +} + +/* + * Get the value of a smart attribute + * + * @port pointer to the port structure + * @id attribute number + * @attrib pointer to return attrib information corresponding to @id + * + * return value + * -EINVAL NULL buffer passed or unsupported attribute @id. + * -EPERM Identify data not valid, SMART not supported or not enabled + */ +static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, + struct smart_attr *attrib) +{ + int rv, i; + struct smart_attr *pattr; + + if (!attrib) + return -EINVAL; + + if (!port->identify_valid) { + dev_warn(&port->dd->pdev->dev, "IDENTIFY DATA not valid\n"); + return -EPERM; + } + if (!(port->identify[82] & 0x1)) { + dev_warn(&port->dd->pdev->dev, "SMART not supported\n"); + return -EPERM; + } + if (!(port->identify[85] & 0x1)) { + dev_warn(&port->dd->pdev->dev, "SMART not enabled\n"); + return -EPERM; + } + + memset(port->smart_buf, 0, ATA_SECT_SIZE); + rv = mtip_get_smart_data(port, port->smart_buf, port->smart_buf_dma); + if (rv) { + dev_warn(&port->dd->pdev->dev, "Failed to ge SMART data\n"); + return rv; + } + + pattr = (struct smart_attr *)(port->smart_buf + 2); + for (i = 0; i < 29; i++, pattr++) + if (pattr->attr_id == id) { + memcpy(attrib, pattr, sizeof(struct smart_attr)); + break; + } + + if (i == 29) { + dev_warn(&port->dd->pdev->dev, + "Query for invalid SMART attribute ID\n"); + rv = -EINVAL; + } + + return rv; +} + +/* + * Get the drive capacity. + * + * @dd Pointer to the device data structure. + * @sectors Pointer to the variable that will receive the sector count. + * + * return value + * 1 Capacity was returned successfully. + * 0 The identify information is invalid. + */ +static bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors) +{ + struct mtip_port *port = dd->port; + u64 total, raw0, raw1, raw2, raw3; + raw0 = port->identify[100]; + raw1 = port->identify[101]; + raw2 = port->identify[102]; + raw3 = port->identify[103]; + total = raw0 | raw1<<16 | raw2<<32 | raw3<<48; + *sectors = total; + return (bool) !!port->identify_valid; +} + +/* + * Display the identify command data. + * + * @port Pointer to the port data structure. + * + * return value + * None + */ +static void mtip_dump_identify(struct mtip_port *port) +{ + sector_t sectors; + unsigned short revid; + char cbuf[42]; + + if (!port->identify_valid) + return; + + strscpy(cbuf, (char *)(port->identify + 10), 21); + dev_info(&port->dd->pdev->dev, + "Serial No.: %s\n", cbuf); + + strscpy(cbuf, (char *)(port->identify + 23), 9); + dev_info(&port->dd->pdev->dev, + "Firmware Ver.: %s\n", cbuf); + + strscpy(cbuf, (char *)(port->identify + 27), 41); + dev_info(&port->dd->pdev->dev, "Model: %s\n", cbuf); + + dev_info(&port->dd->pdev->dev, "Security: %04x %s\n", + port->identify[128], + port->identify[128] & 0x4 ? "(LOCKED)" : ""); + + if (mtip_hw_get_capacity(port->dd, §ors)) + dev_info(&port->dd->pdev->dev, + "Capacity: %llu sectors (%llu MB)\n", + (u64)sectors, + ((u64)sectors) * ATA_SECT_SIZE >> 20); + + pci_read_config_word(port->dd->pdev, PCI_REVISION_ID, &revid); + switch (revid & 0xFF) { + case 0x1: + strscpy(cbuf, "A0", 3); + break; + case 0x3: + strscpy(cbuf, "A2", 3); + break; + default: + strscpy(cbuf, "?", 2); + break; + } + dev_info(&port->dd->pdev->dev, + "Card Type: %s\n", cbuf); +} + +/* + * Map the commands scatter list into the command table. + * + * @command Pointer to the command. + * @nents Number of scatter list entries. + * + * return value + * None + */ +static inline void fill_command_sg(struct driver_data *dd, + struct mtip_cmd *command, + int nents) +{ + int n; + unsigned int dma_len; + struct mtip_cmd_sg *command_sg; + struct scatterlist *sg; + + command_sg = command->command + AHCI_CMD_TBL_HDR_SZ; + + for_each_sg(command->sg, sg, nents, n) { + dma_len = sg_dma_len(sg); + if (dma_len > 0x400000) + dev_err(&dd->pdev->dev, + "DMA segment length truncated\n"); + command_sg->info = cpu_to_le32((dma_len-1) & 0x3FFFFF); + command_sg->dba = cpu_to_le32(sg_dma_address(sg)); + command_sg->dba_upper = + cpu_to_le32((sg_dma_address(sg) >> 16) >> 16); + command_sg++; + } +} + +/* + * @brief Execute a drive command. + * + * return value 0 The command completed successfully. + * return value -1 An error occurred while executing the command. + */ +static int exec_drive_task(struct mtip_port *port, u8 *command) +{ + struct host_to_dev_fis fis; + struct host_to_dev_fis *reply = (port->rxfis + RX_FIS_D2H_REG); + unsigned int to; + + /* Build the FIS. */ + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + fis.type = 0x27; + fis.opts = 1 << 7; + fis.command = command[0]; + fis.features = command[1]; + fis.sect_count = command[2]; + fis.sector = command[3]; + fis.cyl_low = command[4]; + fis.cyl_hi = command[5]; + fis.device = command[6] & ~0x10; /* Clear the dev bit*/ + + mtip_set_timeout(port->dd, &fis, &to, 0); + + dbg_printk(MTIP_DRV_NAME " %s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n", + __func__, + command[0], + command[1], + command[2], + command[3], + command[4], + command[5], + command[6]); + + /* Execute the command. */ + if (mtip_exec_internal_command(port, + &fis, + 5, + 0, + 0, + 0, + to) < 0) { + return -1; + } + + command[0] = reply->command; /* Status*/ + command[1] = reply->features; /* Error*/ + command[4] = reply->cyl_low; + command[5] = reply->cyl_hi; + + dbg_printk(MTIP_DRV_NAME " %s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n", + __func__, + command[0], + command[1], + command[4], + command[5]); + + return 0; +} + +/* + * @brief Execute a drive command. + * + * @param port Pointer to the port data structure. + * @param command Pointer to the user specified command parameters. + * @param user_buffer Pointer to the user space buffer where read sector + * data should be copied. + * + * return value 0 The command completed successfully. + * return value -EFAULT An error occurred while copying the completion + * data to the user space buffer. + * return value -1 An error occurred while executing the command. + */ +static int exec_drive_command(struct mtip_port *port, u8 *command, + void __user *user_buffer) +{ + struct host_to_dev_fis fis; + struct host_to_dev_fis *reply; + u8 *buf = NULL; + dma_addr_t dma_addr = 0; + int rv = 0, xfer_sz = command[3]; + unsigned int to; + + if (xfer_sz) { + if (!user_buffer) + return -EFAULT; + + buf = dma_alloc_coherent(&port->dd->pdev->dev, + ATA_SECT_SIZE * xfer_sz, + &dma_addr, + GFP_KERNEL); + if (!buf) { + dev_err(&port->dd->pdev->dev, + "Memory allocation failed (%d bytes)\n", + ATA_SECT_SIZE * xfer_sz); + return -ENOMEM; + } + } + + /* Build the FIS. */ + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + fis.type = 0x27; + fis.opts = 1 << 7; + fis.command = command[0]; + fis.features = command[2]; + fis.sect_count = command[3]; + if (fis.command == ATA_CMD_SMART) { + fis.sector = command[1]; + fis.cyl_low = 0x4F; + fis.cyl_hi = 0xC2; + } + + mtip_set_timeout(port->dd, &fis, &to, 0); + + if (xfer_sz) + reply = (port->rxfis + RX_FIS_PIO_SETUP); + else + reply = (port->rxfis + RX_FIS_D2H_REG); + + dbg_printk(MTIP_DRV_NAME + " %s: User Command: cmd %x, sect %x, " + "feat %x, sectcnt %x\n", + __func__, + command[0], + command[1], + command[2], + command[3]); + + /* Execute the command. */ + if (mtip_exec_internal_command(port, + &fis, + 5, + (xfer_sz ? dma_addr : 0), + (xfer_sz ? ATA_SECT_SIZE * xfer_sz : 0), + 0, + to) + < 0) { + rv = -EFAULT; + goto exit_drive_command; + } + + /* Collect the completion status. */ + command[0] = reply->command; /* Status*/ + command[1] = reply->features; /* Error*/ + command[2] = reply->sect_count; + + dbg_printk(MTIP_DRV_NAME + " %s: Completion Status: stat %x, " + "err %x, nsect %x\n", + __func__, + command[0], + command[1], + command[2]); + + if (xfer_sz) { + if (copy_to_user(user_buffer, + buf, + ATA_SECT_SIZE * command[3])) { + rv = -EFAULT; + goto exit_drive_command; + } + } +exit_drive_command: + if (buf) + dma_free_coherent(&port->dd->pdev->dev, + ATA_SECT_SIZE * xfer_sz, buf, dma_addr); + return rv; +} + +/* + * Indicates whether a command has a single sector payload. + * + * @command passed to the device to perform the certain event. + * @features passed to the device to perform the certain event. + * + * return value + * 1 command is one that always has a single sector payload, + * regardless of the value in the Sector Count field. + * 0 otherwise + * + */ +static unsigned int implicit_sector(unsigned char command, + unsigned char features) +{ + unsigned int rv = 0; + + /* list of commands that have an implicit sector count of 1 */ + switch (command) { + case ATA_CMD_SEC_SET_PASS: + case ATA_CMD_SEC_UNLOCK: + case ATA_CMD_SEC_ERASE_PREP: + case ATA_CMD_SEC_ERASE_UNIT: + case ATA_CMD_SEC_FREEZE_LOCK: + case ATA_CMD_SEC_DISABLE_PASS: + case ATA_CMD_PMP_READ: + case ATA_CMD_PMP_WRITE: + rv = 1; + break; + case ATA_CMD_SET_MAX: + if (features == ATA_SET_MAX_UNLOCK) + rv = 1; + break; + case ATA_CMD_SMART: + if ((features == ATA_SMART_READ_VALUES) || + (features == ATA_SMART_READ_THRESHOLDS)) + rv = 1; + break; + case ATA_CMD_CONF_OVERLAY: + if ((features == ATA_DCO_IDENTIFY) || + (features == ATA_DCO_SET)) + rv = 1; + break; + } + return rv; +} + +/* + * Executes a taskfile + * See ide_taskfile_ioctl() for derivation + */ +static int exec_drive_taskfile(struct driver_data *dd, + void __user *buf, + ide_task_request_t *req_task, + int outtotal) +{ + struct host_to_dev_fis fis; + struct host_to_dev_fis *reply; + u8 *outbuf = NULL; + u8 *inbuf = NULL; + dma_addr_t outbuf_dma = 0; + dma_addr_t inbuf_dma = 0; + dma_addr_t dma_buffer = 0; + int err = 0; + unsigned int taskin = 0; + unsigned int taskout = 0; + u8 nsect = 0; + unsigned int timeout; + unsigned int force_single_sector; + unsigned int transfer_size; + unsigned long task_file_data; + int intotal = outtotal + req_task->out_size; + int erasemode = 0; + + taskout = req_task->out_size; + taskin = req_task->in_size; + /* 130560 = 512 * 0xFF*/ + if (taskin > 130560 || taskout > 130560) + return -EINVAL; + + if (taskout) { + outbuf = memdup_user(buf + outtotal, taskout); + if (IS_ERR(outbuf)) + return PTR_ERR(outbuf); + + outbuf_dma = dma_map_single(&dd->pdev->dev, outbuf, + taskout, DMA_TO_DEVICE); + if (dma_mapping_error(&dd->pdev->dev, outbuf_dma)) { + err = -ENOMEM; + goto abort; + } + dma_buffer = outbuf_dma; + } + + if (taskin) { + inbuf = memdup_user(buf + intotal, taskin); + if (IS_ERR(inbuf)) { + err = PTR_ERR(inbuf); + inbuf = NULL; + goto abort; + } + inbuf_dma = dma_map_single(&dd->pdev->dev, inbuf, + taskin, DMA_FROM_DEVICE); + if (dma_mapping_error(&dd->pdev->dev, inbuf_dma)) { + err = -ENOMEM; + goto abort; + } + dma_buffer = inbuf_dma; + } + + /* only supports PIO and non-data commands from this ioctl. */ + switch (req_task->data_phase) { + case TASKFILE_OUT: + nsect = taskout / ATA_SECT_SIZE; + reply = (dd->port->rxfis + RX_FIS_PIO_SETUP); + break; + case TASKFILE_IN: + reply = (dd->port->rxfis + RX_FIS_PIO_SETUP); + break; + case TASKFILE_NO_DATA: + reply = (dd->port->rxfis + RX_FIS_D2H_REG); + break; + default: + err = -EINVAL; + goto abort; + } + + /* Build the FIS. */ + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + + fis.type = 0x27; + fis.opts = 1 << 7; + fis.command = req_task->io_ports[7]; + fis.features = req_task->io_ports[1]; + fis.sect_count = req_task->io_ports[2]; + fis.lba_low = req_task->io_ports[3]; + fis.lba_mid = req_task->io_ports[4]; + fis.lba_hi = req_task->io_ports[5]; + /* Clear the dev bit*/ + fis.device = req_task->io_ports[6] & ~0x10; + + if ((req_task->in_flags.all == 0) && (req_task->out_flags.all & 1)) { + req_task->in_flags.all = + IDE_TASKFILE_STD_IN_FLAGS | + (IDE_HOB_STD_IN_FLAGS << 8); + fis.lba_low_ex = req_task->hob_ports[3]; + fis.lba_mid_ex = req_task->hob_ports[4]; + fis.lba_hi_ex = req_task->hob_ports[5]; + fis.features_ex = req_task->hob_ports[1]; + fis.sect_cnt_ex = req_task->hob_ports[2]; + + } else { + req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; + } + + force_single_sector = implicit_sector(fis.command, fis.features); + + if ((taskin || taskout) && (!fis.sect_count)) { + if (nsect) + fis.sect_count = nsect; + else { + if (!force_single_sector) { + dev_warn(&dd->pdev->dev, + "data movement but " + "sect_count is 0\n"); + err = -EINVAL; + goto abort; + } + } + } + + dbg_printk(MTIP_DRV_NAME + " %s: cmd %x, feat %x, nsect %x," + " sect/lbal %x, lcyl/lbam %x, hcyl/lbah %x," + " head/dev %x\n", + __func__, + fis.command, + fis.features, + fis.sect_count, + fis.lba_low, + fis.lba_mid, + fis.lba_hi, + fis.device); + + /* check for erase mode support during secure erase.*/ + if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf && + (outbuf[0] & MTIP_SEC_ERASE_MODE)) { + erasemode = 1; + } + + mtip_set_timeout(dd, &fis, &timeout, erasemode); + + /* Determine the correct transfer size.*/ + if (force_single_sector) + transfer_size = ATA_SECT_SIZE; + else + transfer_size = ATA_SECT_SIZE * fis.sect_count; + + /* Execute the command.*/ + if (mtip_exec_internal_command(dd->port, + &fis, + 5, + dma_buffer, + transfer_size, + 0, + timeout) < 0) { + err = -EIO; + goto abort; + } + + task_file_data = readl(dd->port->mmio+PORT_TFDATA); + + if ((req_task->data_phase == TASKFILE_IN) && !(task_file_data & 1)) { + reply = dd->port->rxfis + RX_FIS_PIO_SETUP; + req_task->io_ports[7] = reply->control; + } else { + reply = dd->port->rxfis + RX_FIS_D2H_REG; + req_task->io_ports[7] = reply->command; + } + + /* reclaim the DMA buffers.*/ + if (inbuf_dma) + dma_unmap_single(&dd->pdev->dev, inbuf_dma, taskin, + DMA_FROM_DEVICE); + if (outbuf_dma) + dma_unmap_single(&dd->pdev->dev, outbuf_dma, taskout, + DMA_TO_DEVICE); + inbuf_dma = 0; + outbuf_dma = 0; + + /* return the ATA registers to the caller.*/ + req_task->io_ports[1] = reply->features; + req_task->io_ports[2] = reply->sect_count; + req_task->io_ports[3] = reply->lba_low; + req_task->io_ports[4] = reply->lba_mid; + req_task->io_ports[5] = reply->lba_hi; + req_task->io_ports[6] = reply->device; + + if (req_task->out_flags.all & 1) { + + req_task->hob_ports[3] = reply->lba_low_ex; + req_task->hob_ports[4] = reply->lba_mid_ex; + req_task->hob_ports[5] = reply->lba_hi_ex; + req_task->hob_ports[1] = reply->features_ex; + req_task->hob_ports[2] = reply->sect_cnt_ex; + } + dbg_printk(MTIP_DRV_NAME + " %s: Completion: stat %x," + "err %x, sect_cnt %x, lbalo %x," + "lbamid %x, lbahi %x, dev %x\n", + __func__, + req_task->io_ports[7], + req_task->io_ports[1], + req_task->io_ports[2], + req_task->io_ports[3], + req_task->io_ports[4], + req_task->io_ports[5], + req_task->io_ports[6]); + + if (taskout) { + if (copy_to_user(buf + outtotal, outbuf, taskout)) { + err = -EFAULT; + goto abort; + } + } + if (taskin) { + if (copy_to_user(buf + intotal, inbuf, taskin)) { + err = -EFAULT; + goto abort; + } + } +abort: + if (inbuf_dma) + dma_unmap_single(&dd->pdev->dev, inbuf_dma, taskin, + DMA_FROM_DEVICE); + if (outbuf_dma) + dma_unmap_single(&dd->pdev->dev, outbuf_dma, taskout, + DMA_TO_DEVICE); + kfree(outbuf); + kfree(inbuf); + + return err; +} + +/* + * Handle IOCTL calls from the Block Layer. + * + * This function is called by the Block Layer when it receives an IOCTL + * command that it does not understand. If the IOCTL command is not supported + * this function returns -ENOTTY. + * + * @dd Pointer to the driver data structure. + * @cmd IOCTL command passed from the Block Layer. + * @arg IOCTL argument passed from the Block Layer. + * + * return value + * 0 The IOCTL completed successfully. + * -ENOTTY The specified command is not supported. + * -EFAULT An error occurred copying data to a user space buffer. + * -EIO An error occurred while executing the command. + */ +static int mtip_hw_ioctl(struct driver_data *dd, unsigned int cmd, + unsigned long arg) +{ + switch (cmd) { + case HDIO_GET_IDENTITY: + { + if (copy_to_user((void __user *)arg, dd->port->identify, + sizeof(u16) * ATA_ID_WORDS)) + return -EFAULT; + break; + } + case HDIO_DRIVE_CMD: + { + u8 drive_command[4]; + + /* Copy the user command info to our buffer. */ + if (copy_from_user(drive_command, + (void __user *) arg, + sizeof(drive_command))) + return -EFAULT; + + /* Execute the drive command. */ + if (exec_drive_command(dd->port, + drive_command, + (void __user *) (arg+4))) + return -EIO; + + /* Copy the status back to the users buffer. */ + if (copy_to_user((void __user *) arg, + drive_command, + sizeof(drive_command))) + return -EFAULT; + + break; + } + case HDIO_DRIVE_TASK: + { + u8 drive_command[7]; + + /* Copy the user command info to our buffer. */ + if (copy_from_user(drive_command, + (void __user *) arg, + sizeof(drive_command))) + return -EFAULT; + + /* Execute the drive command. */ + if (exec_drive_task(dd->port, drive_command)) + return -EIO; + + /* Copy the status back to the users buffer. */ + if (copy_to_user((void __user *) arg, + drive_command, + sizeof(drive_command))) + return -EFAULT; + + break; + } + case HDIO_DRIVE_TASKFILE: { + ide_task_request_t req_task; + int ret, outtotal; + + if (copy_from_user(&req_task, (void __user *) arg, + sizeof(req_task))) + return -EFAULT; + + outtotal = sizeof(req_task); + + ret = exec_drive_taskfile(dd, (void __user *) arg, + &req_task, outtotal); + + if (copy_to_user((void __user *) arg, &req_task, + sizeof(req_task))) + return -EFAULT; + + return ret; + } + + default: + return -EINVAL; + } + return 0; +} + +/* + * Submit an IO to the hw + * + * This function is called by the block layer to issue an io + * to the device. Upon completion, the callback function will + * be called with the data parameter passed as the callback data. + * + * @dd Pointer to the driver data structure. + * @start First sector to read. + * @nsect Number of sectors to read. + * @tag The tag of this read command. + * @callback Pointer to the function that should be called + * when the read completes. + * @data Callback data passed to the callback function + * when the read completes. + * @dir Direction (read or write) + * + * return value + * None + */ +static void mtip_hw_submit_io(struct driver_data *dd, struct request *rq, + struct mtip_cmd *command, + struct blk_mq_hw_ctx *hctx) +{ + struct mtip_cmd_hdr *hdr = + dd->port->command_list + sizeof(struct mtip_cmd_hdr) * rq->tag; + struct host_to_dev_fis *fis; + struct mtip_port *port = dd->port; + int dma_dir = rq_data_dir(rq) == READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + u64 start = blk_rq_pos(rq); + unsigned int nsect = blk_rq_sectors(rq); + unsigned int nents; + + /* Map the scatter list for DMA access */ + nents = blk_rq_map_sg(hctx->queue, rq, command->sg); + nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir); + + prefetch(&port->flags); + + command->scatter_ents = nents; + + /* + * The number of retries for this command before it is + * reported as a failure to the upper layers. + */ + command->retries = MTIP_MAX_RETRIES; + + /* Fill out fis */ + fis = command->command; + fis->type = 0x27; + fis->opts = 1 << 7; + if (dma_dir == DMA_FROM_DEVICE) + fis->command = ATA_CMD_FPDMA_READ; + else + fis->command = ATA_CMD_FPDMA_WRITE; + fis->lba_low = start & 0xFF; + fis->lba_mid = (start >> 8) & 0xFF; + fis->lba_hi = (start >> 16) & 0xFF; + fis->lba_low_ex = (start >> 24) & 0xFF; + fis->lba_mid_ex = (start >> 32) & 0xFF; + fis->lba_hi_ex = (start >> 40) & 0xFF; + fis->device = 1 << 6; + fis->features = nsect & 0xFF; + fis->features_ex = (nsect >> 8) & 0xFF; + fis->sect_count = ((rq->tag << 3) | (rq->tag >> 5)); + fis->sect_cnt_ex = 0; + fis->control = 0; + fis->res2 = 0; + fis->res3 = 0; + fill_command_sg(dd, command, nents); + + if (unlikely(command->unaligned)) + fis->device |= 1 << 7; + + /* Populate the command header */ + hdr->ctba = cpu_to_le32(command->command_dma & 0xFFFFFFFF); + if (test_bit(MTIP_PF_HOST_CAP_64, &dd->port->flags)) + hdr->ctbau = cpu_to_le32((command->command_dma >> 16) >> 16); + hdr->opts = cpu_to_le32((nents << 16) | 5 | AHCI_CMD_PREFETCH); + hdr->byte_count = 0; + + command->direction = dma_dir; + + /* + * To prevent this command from being issued + * if an internal command is in progress or error handling is active. + */ + if (unlikely(port->flags & MTIP_PF_PAUSE_IO)) { + set_bit(rq->tag, port->cmds_to_issue); + set_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags); + return; + } + + /* Issue the command to the hardware */ + mtip_issue_ncq_command(port, rq->tag); +} + +/* + * Sysfs status dump. + * + * @dev Pointer to the device structure, passed by the kernrel. + * @attr Pointer to the device_attribute structure passed by the kernel. + * @buf Pointer to the char buffer that will receive the stats info. + * + * return value + * The size, in bytes, of the data copied into buf. + */ +static ssize_t mtip_hw_show_status(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct driver_data *dd = dev_to_disk(dev)->private_data; + int size = 0; + + if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag)) + size += sprintf(buf, "%s", "thermal_shutdown\n"); + else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag)) + size += sprintf(buf, "%s", "write_protect\n"); + else + size += sprintf(buf, "%s", "online\n"); + + return size; +} + +static DEVICE_ATTR(status, 0444, mtip_hw_show_status, NULL); + +static struct attribute *mtip_disk_attrs[] = { + &dev_attr_status.attr, + NULL, +}; + +static const struct attribute_group mtip_disk_attr_group = { + .attrs = mtip_disk_attrs, +}; + +static const struct attribute_group *mtip_disk_attr_groups[] = { + &mtip_disk_attr_group, + NULL, +}; + +static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf, + size_t len, loff_t *offset) +{ + struct driver_data *dd = (struct driver_data *)f->private_data; + char *buf; + u32 group_allocated; + int size = *offset; + int n, rv = 0; + + if (!len || size) + return 0; + + buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + size += sprintf(&buf[size], "H/ S ACTive : [ 0x"); + + for (n = dd->slot_groups-1; n >= 0; n--) + size += sprintf(&buf[size], "%08X ", + readl(dd->port->s_active[n])); + + size += sprintf(&buf[size], "]\n"); + size += sprintf(&buf[size], "H/ Command Issue : [ 0x"); + + for (n = dd->slot_groups-1; n >= 0; n--) + size += sprintf(&buf[size], "%08X ", + readl(dd->port->cmd_issue[n])); + + size += sprintf(&buf[size], "]\n"); + size += sprintf(&buf[size], "H/ Completed : [ 0x"); + + for (n = dd->slot_groups-1; n >= 0; n--) + size += sprintf(&buf[size], "%08X ", + readl(dd->port->completed[n])); + + size += sprintf(&buf[size], "]\n"); + size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n", + readl(dd->port->mmio + PORT_IRQ_STAT)); + size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n", + readl(dd->mmio + HOST_IRQ_STAT)); + size += sprintf(&buf[size], "\n"); + + size += sprintf(&buf[size], "L/ Commands in Q : [ 0x"); + + for (n = dd->slot_groups-1; n >= 0; n--) { + if (sizeof(long) > sizeof(u32)) + group_allocated = + dd->port->cmds_to_issue[n/2] >> (32*(n&1)); + else + group_allocated = dd->port->cmds_to_issue[n]; + size += sprintf(&buf[size], "%08X ", group_allocated); + } + size += sprintf(&buf[size], "]\n"); + + *offset = size <= len ? size : len; + size = copy_to_user(ubuf, buf, *offset); + if (size) + rv = -EFAULT; + + kfree(buf); + return rv ? rv : *offset; +} + +static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf, + size_t len, loff_t *offset) +{ + struct driver_data *dd = (struct driver_data *)f->private_data; + char *buf; + int size = *offset; + int rv = 0; + + if (!len || size) + return 0; + + buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n", + dd->port->flags); + size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n", + dd->dd_flag); + + *offset = size <= len ? size : len; + size = copy_to_user(ubuf, buf, *offset); + if (size) + rv = -EFAULT; + + kfree(buf); + return rv ? rv : *offset; +} + +static const struct file_operations mtip_regs_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = mtip_hw_read_registers, + .llseek = no_llseek, +}; + +static const struct file_operations mtip_flags_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = mtip_hw_read_flags, + .llseek = no_llseek, +}; + +static int mtip_hw_debugfs_init(struct driver_data *dd) +{ + if (!dfs_parent) + return -1; + + dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent); + if (IS_ERR_OR_NULL(dd->dfs_node)) { + dev_warn(&dd->pdev->dev, + "Error creating node %s under debugfs\n", + dd->disk->disk_name); + dd->dfs_node = NULL; + return -1; + } + + debugfs_create_file("flags", 0444, dd->dfs_node, dd, &mtip_flags_fops); + debugfs_create_file("registers", 0444, dd->dfs_node, dd, + &mtip_regs_fops); + + return 0; +} + +static void mtip_hw_debugfs_exit(struct driver_data *dd) +{ + debugfs_remove_recursive(dd->dfs_node); +} + +/* + * Perform any init/resume time hardware setup + * + * @dd Pointer to the driver data structure. + * + * return value + * None + */ +static inline void hba_setup(struct driver_data *dd) +{ + u32 hwdata; + hwdata = readl(dd->mmio + HOST_HSORG); + + /* interrupt bug workaround: use only 1 IS bit.*/ + writel(hwdata | + HSORG_DISABLE_SLOTGRP_INTR | + HSORG_DISABLE_SLOTGRP_PXIS, + dd->mmio + HOST_HSORG); +} + +static int mtip_device_unaligned_constrained(struct driver_data *dd) +{ + return (dd->pdev->device == P420M_DEVICE_ID ? 1 : 0); +} + +/* + * Detect the details of the product, and store anything needed + * into the driver data structure. This includes product type and + * version and number of slot groups. + * + * @dd Pointer to the driver data structure. + * + * return value + * None + */ +static void mtip_detect_product(struct driver_data *dd) +{ + u32 hwdata; + unsigned int rev, slotgroups; + + /* + * HBA base + 0xFC [15:0] - vendor-specific hardware interface + * info register: + * [15:8] hardware/software interface rev# + * [ 3] asic-style interface + * [ 2:0] number of slot groups, minus 1 (only valid for asic-style). + */ + hwdata = readl(dd->mmio + HOST_HSORG); + + dd->product_type = MTIP_PRODUCT_UNKNOWN; + dd->slot_groups = 1; + + if (hwdata & 0x8) { + dd->product_type = MTIP_PRODUCT_ASICFPGA; + rev = (hwdata & HSORG_HWREV) >> 8; + slotgroups = (hwdata & HSORG_SLOTGROUPS) + 1; + dev_info(&dd->pdev->dev, + "ASIC-FPGA design, HS rev 0x%x, " + "%i slot groups [%i slots]\n", + rev, + slotgroups, + slotgroups * 32); + + if (slotgroups > MTIP_MAX_SLOT_GROUPS) { + dev_warn(&dd->pdev->dev, + "Warning: driver only supports " + "%i slot groups.\n", MTIP_MAX_SLOT_GROUPS); + slotgroups = MTIP_MAX_SLOT_GROUPS; + } + dd->slot_groups = slotgroups; + return; + } + + dev_warn(&dd->pdev->dev, "Unrecognized product id\n"); +} + +/* + * Blocking wait for FTL rebuild to complete + * + * @dd Pointer to the DRIVER_DATA structure. + * + * return value + * 0 FTL rebuild completed successfully + * -EFAULT FTL rebuild error/timeout/interruption + */ +static int mtip_ftl_rebuild_poll(struct driver_data *dd) +{ + unsigned long timeout, cnt = 0, start; + + dev_warn(&dd->pdev->dev, + "FTL rebuild in progress. Polling for completion.\n"); + + start = jiffies; + timeout = jiffies + msecs_to_jiffies(MTIP_FTL_REBUILD_TIMEOUT_MS); + + do { + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, + &dd->dd_flag))) + return -EFAULT; + if (mtip_check_surprise_removal(dd)) + return -EFAULT; + + if (mtip_get_identify(dd->port, NULL) < 0) + return -EFAULT; + + if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) == + MTIP_FTL_REBUILD_MAGIC) { + ssleep(1); + /* Print message every 3 minutes */ + if (cnt++ >= 180) { + dev_warn(&dd->pdev->dev, + "FTL rebuild in progress (%d secs).\n", + jiffies_to_msecs(jiffies - start) / 1000); + cnt = 0; + } + } else { + dev_warn(&dd->pdev->dev, + "FTL rebuild complete (%d secs).\n", + jiffies_to_msecs(jiffies - start) / 1000); + mtip_block_initialize(dd); + return 0; + } + } while (time_before(jiffies, timeout)); + + /* Check for timeout */ + dev_err(&dd->pdev->dev, + "Timed out waiting for FTL rebuild to complete (%d secs).\n", + jiffies_to_msecs(jiffies - start) / 1000); + return -EFAULT; +} + +static void mtip_softirq_done_fn(struct request *rq) +{ + struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); + struct driver_data *dd = rq->q->queuedata; + + /* Unmap the DMA scatter list entries */ + dma_unmap_sg(&dd->pdev->dev, cmd->sg, cmd->scatter_ents, + cmd->direction); + + if (unlikely(cmd->unaligned)) + atomic_inc(&dd->port->cmd_slot_unal); + + blk_mq_end_request(rq, cmd->status); +} + +static bool mtip_abort_cmd(struct request *req, void *data) +{ + struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req); + struct driver_data *dd = data; + + dbg_printk(MTIP_DRV_NAME " Aborting request, tag = %d\n", req->tag); + + clear_bit(req->tag, dd->port->cmds_to_issue); + cmd->status = BLK_STS_IOERR; + mtip_softirq_done_fn(req); + return true; +} + +static bool mtip_queue_cmd(struct request *req, void *data) +{ + struct driver_data *dd = data; + + set_bit(req->tag, dd->port->cmds_to_issue); + blk_abort_request(req); + return true; +} + +/* + * service thread to issue queued commands + * + * @data Pointer to the driver data structure. + * + * return value + * 0 + */ + +static int mtip_service_thread(void *data) +{ + struct driver_data *dd = (struct driver_data *)data; + unsigned long slot, slot_start, slot_wrap, to; + unsigned int num_cmd_slots = dd->slot_groups * 32; + struct mtip_port *port = dd->port; + + while (1) { + if (kthread_should_stop() || + test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags)) + goto st_out; + clear_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); + + /* + * the condition is to check neither an internal command is + * is in progress nor error handling is active + */ + wait_event_interruptible(port->svc_wait, (port->flags) && + (port->flags & MTIP_PF_SVC_THD_WORK)); + + if (kthread_should_stop() || + test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags)) + goto st_out; + + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, + &dd->dd_flag))) + goto st_out; + + set_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); + +restart_eh: + /* Demux bits: start with error handling */ + if (test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags)) { + mtip_handle_tfe(dd); + clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); + } + + if (test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags)) + goto restart_eh; + + if (test_bit(MTIP_PF_TO_ACTIVE_BIT, &port->flags)) { + to = jiffies + msecs_to_jiffies(5000); + + do { + mdelay(100); + } while (atomic_read(&dd->irq_workers_active) != 0 && + time_before(jiffies, to)); + + if (atomic_read(&dd->irq_workers_active) != 0) + dev_warn(&dd->pdev->dev, + "Completion workers still active!"); + + blk_mq_quiesce_queue(dd->queue); + + blk_mq_tagset_busy_iter(&dd->tags, mtip_queue_cmd, dd); + + set_bit(MTIP_PF_ISSUE_CMDS_BIT, &dd->port->flags); + + if (mtip_device_reset(dd)) + blk_mq_tagset_busy_iter(&dd->tags, + mtip_abort_cmd, dd); + + clear_bit(MTIP_PF_TO_ACTIVE_BIT, &dd->port->flags); + + blk_mq_unquiesce_queue(dd->queue); + } + + if (test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) { + slot = 1; + /* used to restrict the loop to one iteration */ + slot_start = num_cmd_slots; + slot_wrap = 0; + while (1) { + slot = find_next_bit(port->cmds_to_issue, + num_cmd_slots, slot); + if (slot_wrap == 1) { + if ((slot_start >= slot) || + (slot >= num_cmd_slots)) + break; + } + if (unlikely(slot_start == num_cmd_slots)) + slot_start = slot; + + if (unlikely(slot == num_cmd_slots)) { + slot = 1; + slot_wrap = 1; + continue; + } + + /* Issue the command to the hardware */ + mtip_issue_ncq_command(port, slot); + + clear_bit(slot, port->cmds_to_issue); + } + + clear_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags); + } + + if (test_bit(MTIP_PF_REBUILD_BIT, &port->flags)) { + if (mtip_ftl_rebuild_poll(dd) == 0) + clear_bit(MTIP_PF_REBUILD_BIT, &port->flags); + } + } + +st_out: + return 0; +} + +/* + * DMA region teardown + * + * @dd Pointer to driver_data structure + * + * return value + * None + */ +static void mtip_dma_free(struct driver_data *dd) +{ + struct mtip_port *port = dd->port; + + if (port->block1) + dma_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ, + port->block1, port->block1_dma); + + if (port->command_list) { + dma_free_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ, + port->command_list, port->command_list_dma); + } +} + +/* + * DMA region setup + * + * @dd Pointer to driver_data structure + * + * return value + * -ENOMEM Not enough free DMA region space to initialize driver + */ +static int mtip_dma_alloc(struct driver_data *dd) +{ + struct mtip_port *port = dd->port; + + /* Allocate dma memory for RX Fis, Identify, and Sector Buffer */ + port->block1 = + dma_alloc_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ, + &port->block1_dma, GFP_KERNEL); + if (!port->block1) + return -ENOMEM; + + /* Allocate dma memory for command list */ + port->command_list = + dma_alloc_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ, + &port->command_list_dma, GFP_KERNEL); + if (!port->command_list) { + dma_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ, + port->block1, port->block1_dma); + port->block1 = NULL; + port->block1_dma = 0; + return -ENOMEM; + } + + /* Setup all pointers into first DMA region */ + port->rxfis = port->block1 + AHCI_RX_FIS_OFFSET; + port->rxfis_dma = port->block1_dma + AHCI_RX_FIS_OFFSET; + port->identify = port->block1 + AHCI_IDFY_OFFSET; + port->identify_dma = port->block1_dma + AHCI_IDFY_OFFSET; + port->log_buf = port->block1 + AHCI_SECTBUF_OFFSET; + port->log_buf_dma = port->block1_dma + AHCI_SECTBUF_OFFSET; + port->smart_buf = port->block1 + AHCI_SMARTBUF_OFFSET; + port->smart_buf_dma = port->block1_dma + AHCI_SMARTBUF_OFFSET; + + return 0; +} + +static int mtip_hw_get_identify(struct driver_data *dd) +{ + struct smart_attr attr242; + unsigned char *buf; + int rv; + + if (mtip_get_identify(dd->port, NULL) < 0) + return -EFAULT; + + if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) == + MTIP_FTL_REBUILD_MAGIC) { + set_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags); + return MTIP_FTL_REBUILD_MAGIC; + } + mtip_dump_identify(dd->port); + + /* check write protect, over temp and rebuild statuses */ + rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ, + dd->port->log_buf, + dd->port->log_buf_dma, 1); + if (rv) { + dev_warn(&dd->pdev->dev, + "Error in READ LOG EXT (10h) command\n"); + /* non-critical error, don't fail the load */ + } else { + buf = (unsigned char *)dd->port->log_buf; + if (buf[259] & 0x1) { + dev_info(&dd->pdev->dev, + "Write protect bit is set.\n"); + set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag); + } + if (buf[288] == 0xF7) { + dev_info(&dd->pdev->dev, + "Exceeded Tmax, drive in thermal shutdown.\n"); + set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag); + } + if (buf[288] == 0xBF) { + dev_info(&dd->pdev->dev, + "Drive indicates rebuild has failed.\n"); + set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag); + } + } + + /* get write protect progess */ + memset(&attr242, 0, sizeof(struct smart_attr)); + if (mtip_get_smart_attr(dd->port, 242, &attr242)) + dev_warn(&dd->pdev->dev, + "Unable to check write protect progress\n"); + else + dev_info(&dd->pdev->dev, + "Write protect progress: %u%% (%u blocks)\n", + attr242.cur, le32_to_cpu(attr242.data)); + + return rv; +} + +/* + * Called once for each card. + * + * @dd Pointer to the driver data structure. + * + * return value + * 0 on success, else an error code. + */ +static int mtip_hw_init(struct driver_data *dd) +{ + int i; + int rv; + unsigned long timeout, timetaken; + + dd->mmio = pcim_iomap_table(dd->pdev)[MTIP_ABAR]; + + mtip_detect_product(dd); + if (dd->product_type == MTIP_PRODUCT_UNKNOWN) { + rv = -EIO; + goto out1; + } + + hba_setup(dd); + + dd->port = kzalloc_node(sizeof(struct mtip_port), GFP_KERNEL, + dd->numa_node); + if (!dd->port) + return -ENOMEM; + + /* Continue workqueue setup */ + for (i = 0; i < MTIP_MAX_SLOT_GROUPS; i++) + dd->work[i].port = dd->port; + + /* Enable unaligned IO constraints for some devices */ + if (mtip_device_unaligned_constrained(dd)) + dd->unal_qdepth = MTIP_MAX_UNALIGNED_SLOTS; + else + dd->unal_qdepth = 0; + + atomic_set(&dd->port->cmd_slot_unal, dd->unal_qdepth); + + /* Spinlock to prevent concurrent issue */ + for (i = 0; i < MTIP_MAX_SLOT_GROUPS; i++) + spin_lock_init(&dd->port->cmd_issue_lock[i]); + + /* Set the port mmio base address. */ + dd->port->mmio = dd->mmio + PORT_OFFSET; + dd->port->dd = dd; + + /* DMA allocations */ + rv = mtip_dma_alloc(dd); + if (rv < 0) + goto out1; + + /* Setup the pointers to the extended s_active and CI registers. */ + for (i = 0; i < dd->slot_groups; i++) { + dd->port->s_active[i] = + dd->port->mmio + i*0x80 + PORT_SCR_ACT; + dd->port->cmd_issue[i] = + dd->port->mmio + i*0x80 + PORT_COMMAND_ISSUE; + dd->port->completed[i] = + dd->port->mmio + i*0x80 + PORT_SDBV; + } + + timetaken = jiffies; + timeout = jiffies + msecs_to_jiffies(30000); + while (((readl(dd->port->mmio + PORT_SCR_STAT) & 0x0F) != 0x03) && + time_before(jiffies, timeout)) { + mdelay(100); + } + if (unlikely(mtip_check_surprise_removal(dd))) { + timetaken = jiffies - timetaken; + dev_warn(&dd->pdev->dev, + "Surprise removal detected at %u ms\n", + jiffies_to_msecs(timetaken)); + rv = -ENODEV; + goto out2 ; + } + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) { + timetaken = jiffies - timetaken; + dev_warn(&dd->pdev->dev, + "Removal detected at %u ms\n", + jiffies_to_msecs(timetaken)); + rv = -EFAULT; + goto out2; + } + + /* Conditionally reset the HBA. */ + if (!(readl(dd->mmio + HOST_CAP) & HOST_CAP_NZDMA)) { + if (mtip_hba_reset(dd) < 0) { + dev_err(&dd->pdev->dev, + "Card did not reset within timeout\n"); + rv = -EIO; + goto out2; + } + } else { + /* Clear any pending interrupts on the HBA */ + writel(readl(dd->mmio + HOST_IRQ_STAT), + dd->mmio + HOST_IRQ_STAT); + } + + mtip_init_port(dd->port); + mtip_start_port(dd->port); + + /* Setup the ISR and enable interrupts. */ + rv = request_irq(dd->pdev->irq, mtip_irq_handler, IRQF_SHARED, + dev_driver_string(&dd->pdev->dev), dd); + if (rv) { + dev_err(&dd->pdev->dev, + "Unable to allocate IRQ %d\n", dd->pdev->irq); + goto out2; + } + irq_set_affinity_hint(dd->pdev->irq, get_cpu_mask(dd->isr_binding)); + + /* Enable interrupts on the HBA. */ + writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, + dd->mmio + HOST_CTL); + + init_waitqueue_head(&dd->port->svc_wait); + + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { + rv = -EFAULT; + goto out3; + } + + return rv; + +out3: + /* Disable interrupts on the HBA. */ + writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN, + dd->mmio + HOST_CTL); + + /* Release the IRQ. */ + irq_set_affinity_hint(dd->pdev->irq, NULL); + free_irq(dd->pdev->irq, dd); + +out2: + mtip_deinit_port(dd->port); + mtip_dma_free(dd); + +out1: + /* Free the memory allocated for the for structure. */ + kfree(dd->port); + + return rv; +} + +static int mtip_standby_drive(struct driver_data *dd) +{ + int rv = 0; + + if (dd->sr || !dd->port) + return -ENODEV; + /* + * Send standby immediate (E0h) to the drive so that it + * saves its state. + */ + if (!test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags) && + !test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag) && + !test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag)) { + rv = mtip_standby_immediate(dd->port); + if (rv) + dev_warn(&dd->pdev->dev, + "STANDBY IMMEDIATE failed\n"); + } + return rv; +} + +/* + * Called to deinitialize an interface. + * + * @dd Pointer to the driver data structure. + * + * return value + * 0 + */ +static int mtip_hw_exit(struct driver_data *dd) +{ + if (!dd->sr) { + /* de-initialize the port. */ + mtip_deinit_port(dd->port); + + /* Disable interrupts on the HBA. */ + writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN, + dd->mmio + HOST_CTL); + } + + /* Release the IRQ. */ + irq_set_affinity_hint(dd->pdev->irq, NULL); + free_irq(dd->pdev->irq, dd); + msleep(1000); + + /* Free dma regions */ + mtip_dma_free(dd); + + /* Free the memory allocated for the for structure. */ + kfree(dd->port); + dd->port = NULL; + + return 0; +} + +/* + * Issue a Standby Immediate command to the device. + * + * This function is called by the Block Layer just before the + * system powers off during a shutdown. + * + * @dd Pointer to the driver data structure. + * + * return value + * 0 + */ +static int mtip_hw_shutdown(struct driver_data *dd) +{ + /* + * Send standby immediate (E0h) to the drive so that it + * saves its state. + */ + mtip_standby_drive(dd); + + return 0; +} + +/* + * Suspend function + * + * This function is called by the Block Layer just before the + * system hibernates. + * + * @dd Pointer to the driver data structure. + * + * return value + * 0 Suspend was successful + * -EFAULT Suspend was not successful + */ +static int mtip_hw_suspend(struct driver_data *dd) +{ + /* + * Send standby immediate (E0h) to the drive + * so that it saves its state. + */ + if (mtip_standby_drive(dd) != 0) { + dev_err(&dd->pdev->dev, + "Failed standby-immediate command\n"); + return -EFAULT; + } + + /* Disable interrupts on the HBA.*/ + writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN, + dd->mmio + HOST_CTL); + mtip_deinit_port(dd->port); + + return 0; +} + +/* + * Resume function + * + * This function is called by the Block Layer as the + * system resumes. + * + * @dd Pointer to the driver data structure. + * + * return value + * 0 Resume was successful + * -EFAULT Resume was not successful + */ +static int mtip_hw_resume(struct driver_data *dd) +{ + /* Perform any needed hardware setup steps */ + hba_setup(dd); + + /* Reset the HBA */ + if (mtip_hba_reset(dd) != 0) { + dev_err(&dd->pdev->dev, + "Unable to reset the HBA\n"); + return -EFAULT; + } + + /* + * Enable the port, DMA engine, and FIS reception specific + * h/w in controller. + */ + mtip_init_port(dd->port); + mtip_start_port(dd->port); + + /* Enable interrupts on the HBA.*/ + writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, + dd->mmio + HOST_CTL); + + return 0; +} + +/* + * Helper function for reusing disk name + * upon hot insertion. + */ +static int rssd_disk_name_format(char *prefix, + int index, + char *buf, + int buflen) +{ + const int base = 'z' - 'a' + 1; + char *begin = buf + strlen(prefix); + char *end = buf + buflen; + char *p; + int unit; + + p = end - 1; + *p = '\0'; + unit = base; + do { + if (p == begin) + return -EINVAL; + *--p = 'a' + (index % unit); + index = (index / unit) - 1; + } while (index >= 0); + + memmove(begin, p, end - p); + memcpy(buf, prefix, strlen(prefix)); + + return 0; +} + +/* + * Block layer IOCTL handler. + * + * @dev Pointer to the block_device structure. + * @mode ignored + * @cmd IOCTL command passed from the user application. + * @arg Argument passed from the user application. + * + * return value + * 0 IOCTL completed successfully. + * -ENOTTY IOCTL not supported or invalid driver data + * structure pointer. + */ +static int mtip_block_ioctl(struct block_device *dev, + blk_mode_t mode, + unsigned cmd, + unsigned long arg) +{ + struct driver_data *dd = dev->bd_disk->private_data; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (!dd) + return -ENOTTY; + + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) + return -ENOTTY; + + switch (cmd) { + case BLKFLSBUF: + return -ENOTTY; + default: + return mtip_hw_ioctl(dd, cmd, arg); + } +} + +#ifdef CONFIG_COMPAT +/* + * Block layer compat IOCTL handler. + * + * @dev Pointer to the block_device structure. + * @mode ignored + * @cmd IOCTL command passed from the user application. + * @arg Argument passed from the user application. + * + * return value + * 0 IOCTL completed successfully. + * -ENOTTY IOCTL not supported or invalid driver data + * structure pointer. + */ +static int mtip_block_compat_ioctl(struct block_device *dev, + blk_mode_t mode, + unsigned cmd, + unsigned long arg) +{ + struct driver_data *dd = dev->bd_disk->private_data; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (!dd) + return -ENOTTY; + + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) + return -ENOTTY; + + switch (cmd) { + case BLKFLSBUF: + return -ENOTTY; + case HDIO_DRIVE_TASKFILE: { + struct mtip_compat_ide_task_request_s __user *compat_req_task; + ide_task_request_t req_task; + int compat_tasksize, outtotal, ret; + + compat_tasksize = + sizeof(struct mtip_compat_ide_task_request_s); + + compat_req_task = + (struct mtip_compat_ide_task_request_s __user *) arg; + + if (copy_from_user(&req_task, (void __user *) arg, + compat_tasksize - (2 * sizeof(compat_long_t)))) + return -EFAULT; + + if (get_user(req_task.out_size, &compat_req_task->out_size)) + return -EFAULT; + + if (get_user(req_task.in_size, &compat_req_task->in_size)) + return -EFAULT; + + outtotal = sizeof(struct mtip_compat_ide_task_request_s); + + ret = exec_drive_taskfile(dd, (void __user *) arg, + &req_task, outtotal); + + if (copy_to_user((void __user *) arg, &req_task, + compat_tasksize - + (2 * sizeof(compat_long_t)))) + return -EFAULT; + + if (put_user(req_task.out_size, &compat_req_task->out_size)) + return -EFAULT; + + if (put_user(req_task.in_size, &compat_req_task->in_size)) + return -EFAULT; + + return ret; + } + default: + return mtip_hw_ioctl(dd, cmd, arg); + } +} +#endif + +/* + * Obtain the geometry of the device. + * + * You may think that this function is obsolete, but some applications, + * fdisk for example still used CHS values. This function describes the + * device as having 224 heads and 56 sectors per cylinder. These values are + * chosen so that each cylinder is aligned on a 4KB boundary. Since a + * partition is described in terms of a start and end cylinder this means + * that each partition is also 4KB aligned. Non-aligned partitions adversely + * affects performance. + * + * @dev Pointer to the block_device strucutre. + * @geo Pointer to a hd_geometry structure. + * + * return value + * 0 Operation completed successfully. + * -ENOTTY An error occurred while reading the drive capacity. + */ +static int mtip_block_getgeo(struct block_device *dev, + struct hd_geometry *geo) +{ + struct driver_data *dd = dev->bd_disk->private_data; + sector_t capacity; + + if (!dd) + return -ENOTTY; + + if (!(mtip_hw_get_capacity(dd, &capacity))) { + dev_warn(&dd->pdev->dev, + "Could not get drive capacity.\n"); + return -ENOTTY; + } + + geo->heads = 224; + geo->sectors = 56; + sector_div(capacity, (geo->heads * geo->sectors)); + geo->cylinders = capacity; + return 0; +} + +static void mtip_block_free_disk(struct gendisk *disk) +{ + struct driver_data *dd = disk->private_data; + + ida_free(&rssd_index_ida, dd->index); + kfree(dd); +} + +/* + * Block device operation function. + * + * This structure contains pointers to the functions required by the block + * layer. + */ +static const struct block_device_operations mtip_block_ops = { + .ioctl = mtip_block_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mtip_block_compat_ioctl, +#endif + .getgeo = mtip_block_getgeo, + .free_disk = mtip_block_free_disk, + .owner = THIS_MODULE +}; + +static inline bool is_se_active(struct driver_data *dd) +{ + if (unlikely(test_bit(MTIP_PF_SE_ACTIVE_BIT, &dd->port->flags))) { + if (dd->port->ic_pause_timer) { + unsigned long to = dd->port->ic_pause_timer + + msecs_to_jiffies(1000); + if (time_after(jiffies, to)) { + clear_bit(MTIP_PF_SE_ACTIVE_BIT, + &dd->port->flags); + clear_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag); + dd->port->ic_pause_timer = 0; + wake_up_interruptible(&dd->port->svc_wait); + return false; + } + } + return true; + } + return false; +} + +static inline bool is_stopped(struct driver_data *dd, struct request *rq) +{ + if (likely(!(dd->dd_flag & MTIP_DDF_STOP_IO))) + return false; + + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) + return true; + if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag)) + return true; + if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag) && + rq_data_dir(rq)) + return true; + if (test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag)) + return true; + if (test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag)) + return true; + + return false; +} + +static bool mtip_check_unal_depth(struct blk_mq_hw_ctx *hctx, + struct request *rq) +{ + struct driver_data *dd = hctx->queue->queuedata; + struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); + + if (rq_data_dir(rq) == READ || !dd->unal_qdepth) + return false; + + /* + * If unaligned depth must be limited on this controller, mark it + * as unaligned if the IO isn't on a 4k boundary (start of length). + */ + if (blk_rq_sectors(rq) <= 64) { + if ((blk_rq_pos(rq) & 7) || (blk_rq_sectors(rq) & 7)) + cmd->unaligned = 1; + } + + if (cmd->unaligned && atomic_dec_if_positive(&dd->port->cmd_slot_unal) >= 0) + return true; + + return false; +} + +static blk_status_t mtip_issue_reserved_cmd(struct blk_mq_hw_ctx *hctx, + struct request *rq) +{ + struct driver_data *dd = hctx->queue->queuedata; + struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); + struct mtip_int_cmd *icmd = cmd->icmd; + struct mtip_cmd_hdr *hdr = + dd->port->command_list + sizeof(struct mtip_cmd_hdr) * rq->tag; + struct mtip_cmd_sg *command_sg; + + if (mtip_commands_active(dd->port)) + return BLK_STS_DEV_RESOURCE; + + hdr->ctba = cpu_to_le32(cmd->command_dma & 0xFFFFFFFF); + if (test_bit(MTIP_PF_HOST_CAP_64, &dd->port->flags)) + hdr->ctbau = cpu_to_le32((cmd->command_dma >> 16) >> 16); + /* Populate the SG list */ + hdr->opts = cpu_to_le32(icmd->opts | icmd->fis_len); + if (icmd->buf_len) { + command_sg = cmd->command + AHCI_CMD_TBL_HDR_SZ; + + command_sg->info = cpu_to_le32((icmd->buf_len-1) & 0x3FFFFF); + command_sg->dba = cpu_to_le32(icmd->buffer & 0xFFFFFFFF); + command_sg->dba_upper = + cpu_to_le32((icmd->buffer >> 16) >> 16); + + hdr->opts |= cpu_to_le32((1 << 16)); + } + + /* Populate the command header */ + hdr->byte_count = 0; + + blk_mq_start_request(rq); + mtip_issue_non_ncq_command(dd->port, rq->tag); + return 0; +} + +static blk_status_t mtip_queue_rq(struct blk_mq_hw_ctx *hctx, + const struct blk_mq_queue_data *bd) +{ + struct driver_data *dd = hctx->queue->queuedata; + struct request *rq = bd->rq; + struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); + + if (blk_rq_is_passthrough(rq)) + return mtip_issue_reserved_cmd(hctx, rq); + + if (unlikely(mtip_check_unal_depth(hctx, rq))) + return BLK_STS_DEV_RESOURCE; + + if (is_se_active(dd) || is_stopped(dd, rq)) + return BLK_STS_IOERR; + + blk_mq_start_request(rq); + + mtip_hw_submit_io(dd, rq, cmd, hctx); + return BLK_STS_OK; +} + +static void mtip_free_cmd(struct blk_mq_tag_set *set, struct request *rq, + unsigned int hctx_idx) +{ + struct driver_data *dd = set->driver_data; + struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); + + if (!cmd->command) + return; + + dma_free_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ, cmd->command, + cmd->command_dma); +} + +static int mtip_init_cmd(struct blk_mq_tag_set *set, struct request *rq, + unsigned int hctx_idx, unsigned int numa_node) +{ + struct driver_data *dd = set->driver_data; + struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); + + cmd->command = dma_alloc_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ, + &cmd->command_dma, GFP_KERNEL); + if (!cmd->command) + return -ENOMEM; + + sg_init_table(cmd->sg, MTIP_MAX_SG); + return 0; +} + +static enum blk_eh_timer_return mtip_cmd_timeout(struct request *req) +{ + struct driver_data *dd = req->q->queuedata; + + if (blk_mq_is_reserved_rq(req)) { + struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req); + + cmd->status = BLK_STS_TIMEOUT; + blk_mq_complete_request(req); + return BLK_EH_DONE; + } + + if (test_bit(req->tag, dd->port->cmds_to_issue)) + goto exit_handler; + + if (test_and_set_bit(MTIP_PF_TO_ACTIVE_BIT, &dd->port->flags)) + goto exit_handler; + + wake_up_interruptible(&dd->port->svc_wait); +exit_handler: + return BLK_EH_RESET_TIMER; +} + +static const struct blk_mq_ops mtip_mq_ops = { + .queue_rq = mtip_queue_rq, + .init_request = mtip_init_cmd, + .exit_request = mtip_free_cmd, + .complete = mtip_softirq_done_fn, + .timeout = mtip_cmd_timeout, +}; + +/* + * Block layer initialization function. + * + * This function is called once by the PCI layer for each P320 + * device that is connected to the system. + * + * @dd Pointer to the driver data structure. + * + * return value + * 0 on success else an error code. + */ +static int mtip_block_initialize(struct driver_data *dd) +{ + int rv = 0, wait_for_rebuild = 0; + sector_t capacity; + unsigned int index = 0; + + if (dd->disk) + goto skip_create_disk; /* hw init done, before rebuild */ + + if (mtip_hw_init(dd)) { + rv = -EINVAL; + goto protocol_init_error; + } + + memset(&dd->tags, 0, sizeof(dd->tags)); + dd->tags.ops = &mtip_mq_ops; + dd->tags.nr_hw_queues = 1; + dd->tags.queue_depth = MTIP_MAX_COMMAND_SLOTS; + dd->tags.reserved_tags = 1; + dd->tags.cmd_size = sizeof(struct mtip_cmd); + dd->tags.numa_node = dd->numa_node; + dd->tags.flags = BLK_MQ_F_SHOULD_MERGE; + dd->tags.driver_data = dd; + dd->tags.timeout = MTIP_NCQ_CMD_TIMEOUT_MS; + + rv = blk_mq_alloc_tag_set(&dd->tags); + if (rv) { + dev_err(&dd->pdev->dev, + "Unable to allocate request queue\n"); + goto block_queue_alloc_tag_error; + } + + dd->disk = blk_mq_alloc_disk(&dd->tags, dd); + if (IS_ERR(dd->disk)) { + dev_err(&dd->pdev->dev, + "Unable to allocate request queue\n"); + rv = -ENOMEM; + goto block_queue_alloc_init_error; + } + dd->queue = dd->disk->queue; + + rv = ida_alloc(&rssd_index_ida, GFP_KERNEL); + if (rv < 0) + goto ida_get_error; + index = rv; + + rv = rssd_disk_name_format("rssd", + index, + dd->disk->disk_name, + DISK_NAME_LEN); + if (rv) + goto disk_index_error; + + dd->disk->major = dd->major; + dd->disk->first_minor = index * MTIP_MAX_MINORS; + dd->disk->minors = MTIP_MAX_MINORS; + dd->disk->fops = &mtip_block_ops; + dd->disk->private_data = dd; + dd->index = index; + + mtip_hw_debugfs_init(dd); + +skip_create_disk: + /* Initialize the protocol layer. */ + wait_for_rebuild = mtip_hw_get_identify(dd); + if (wait_for_rebuild < 0) { + dev_err(&dd->pdev->dev, + "Protocol layer initialization failed\n"); + rv = -EINVAL; + goto init_hw_cmds_error; + } + + /* + * if rebuild pending, start the service thread, and delay the block + * queue creation and device_add_disk() + */ + if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC) + goto start_service_thread; + + /* Set device limits. */ + blk_queue_flag_set(QUEUE_FLAG_NONROT, dd->queue); + blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, dd->queue); + blk_queue_max_segments(dd->queue, MTIP_MAX_SG); + blk_queue_physical_block_size(dd->queue, 4096); + blk_queue_max_hw_sectors(dd->queue, 0xffff); + blk_queue_max_segment_size(dd->queue, 0x400000); + dma_set_max_seg_size(&dd->pdev->dev, 0x400000); + blk_queue_io_min(dd->queue, 4096); + + /* Set the capacity of the device in 512 byte sectors. */ + if (!(mtip_hw_get_capacity(dd, &capacity))) { + dev_warn(&dd->pdev->dev, + "Could not read drive capacity\n"); + rv = -EIO; + goto read_capacity_error; + } + set_capacity(dd->disk, capacity); + + /* Enable the block device and add it to /dev */ + rv = device_add_disk(&dd->pdev->dev, dd->disk, mtip_disk_attr_groups); + if (rv) + goto read_capacity_error; + + if (dd->mtip_svc_handler) { + set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); + return rv; /* service thread created for handling rebuild */ + } + +start_service_thread: + dd->mtip_svc_handler = kthread_create_on_node(mtip_service_thread, + dd, dd->numa_node, + "mtip_svc_thd_%02d", index); + + if (IS_ERR(dd->mtip_svc_handler)) { + dev_err(&dd->pdev->dev, "service thread failed to start\n"); + dd->mtip_svc_handler = NULL; + rv = -EFAULT; + goto kthread_run_error; + } + wake_up_process(dd->mtip_svc_handler); + if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC) + rv = wait_for_rebuild; + + return rv; + +kthread_run_error: + /* Delete our gendisk. This also removes the device from /dev */ + del_gendisk(dd->disk); +read_capacity_error: +init_hw_cmds_error: + mtip_hw_debugfs_exit(dd); +disk_index_error: + ida_free(&rssd_index_ida, index); +ida_get_error: + put_disk(dd->disk); +block_queue_alloc_init_error: + blk_mq_free_tag_set(&dd->tags); +block_queue_alloc_tag_error: + mtip_hw_exit(dd); /* De-initialize the protocol layer. */ +protocol_init_error: + return rv; +} + +/* + * Function called by the PCI layer when just before the + * machine shuts down. + * + * If a protocol layer shutdown function is present it will be called + * by this function. + * + * @dd Pointer to the driver data structure. + * + * return value + * 0 + */ +static int mtip_block_shutdown(struct driver_data *dd) +{ + mtip_hw_shutdown(dd); + + dev_info(&dd->pdev->dev, + "Shutting down %s ...\n", dd->disk->disk_name); + + if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) + del_gendisk(dd->disk); + + blk_mq_free_tag_set(&dd->tags); + put_disk(dd->disk); + return 0; +} + +static int mtip_block_suspend(struct driver_data *dd) +{ + dev_info(&dd->pdev->dev, + "Suspending %s ...\n", dd->disk->disk_name); + mtip_hw_suspend(dd); + return 0; +} + +static int mtip_block_resume(struct driver_data *dd) +{ + dev_info(&dd->pdev->dev, "Resuming %s ...\n", + dd->disk->disk_name); + mtip_hw_resume(dd); + return 0; +} + +static void drop_cpu(int cpu) +{ + cpu_use[cpu]--; +} + +static int get_least_used_cpu_on_node(int node) +{ + int cpu, least_used_cpu, least_cnt; + const struct cpumask *node_mask; + + node_mask = cpumask_of_node(node); + least_used_cpu = cpumask_first(node_mask); + least_cnt = cpu_use[least_used_cpu]; + cpu = least_used_cpu; + + for_each_cpu(cpu, node_mask) { + if (cpu_use[cpu] < least_cnt) { + least_used_cpu = cpu; + least_cnt = cpu_use[cpu]; + } + } + cpu_use[least_used_cpu]++; + return least_used_cpu; +} + +/* Helper for selecting a node in round robin mode */ +static inline int mtip_get_next_rr_node(void) +{ + static int next_node = NUMA_NO_NODE; + + if (next_node == NUMA_NO_NODE) { + next_node = first_online_node; + return next_node; + } + + next_node = next_online_node(next_node); + if (next_node == MAX_NUMNODES) + next_node = first_online_node; + return next_node; +} + +static DEFINE_HANDLER(0); +static DEFINE_HANDLER(1); +static DEFINE_HANDLER(2); +static DEFINE_HANDLER(3); +static DEFINE_HANDLER(4); +static DEFINE_HANDLER(5); +static DEFINE_HANDLER(6); +static DEFINE_HANDLER(7); + +static void mtip_disable_link_opts(struct driver_data *dd, struct pci_dev *pdev) +{ + unsigned short pcie_dev_ctrl; + + if (pci_is_pcie(pdev)) { + pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &pcie_dev_ctrl); + if (pcie_dev_ctrl & PCI_EXP_DEVCTL_NOSNOOP_EN || + pcie_dev_ctrl & PCI_EXP_DEVCTL_RELAX_EN) { + dev_info(&dd->pdev->dev, + "Disabling ERO/No-Snoop on bridge device %04x:%04x\n", + pdev->vendor, pdev->device); + pcie_dev_ctrl &= ~(PCI_EXP_DEVCTL_NOSNOOP_EN | + PCI_EXP_DEVCTL_RELAX_EN); + pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, + pcie_dev_ctrl); + } + } +} + +static void mtip_fix_ero_nosnoop(struct driver_data *dd, struct pci_dev *pdev) +{ + /* + * This workaround is specific to AMD/ATI chipset with a PCI upstream + * device with device id 0x5aXX + */ + if (pdev->bus && pdev->bus->self) { + if (pdev->bus->self->vendor == PCI_VENDOR_ID_ATI && + ((pdev->bus->self->device & 0xff00) == 0x5a00)) { + mtip_disable_link_opts(dd, pdev->bus->self); + } else { + /* Check further up the topology */ + struct pci_dev *parent_dev = pdev->bus->self; + if (parent_dev->bus && + parent_dev->bus->parent && + parent_dev->bus->parent->self && + parent_dev->bus->parent->self->vendor == + PCI_VENDOR_ID_ATI && + (parent_dev->bus->parent->self->device & + 0xff00) == 0x5a00) { + mtip_disable_link_opts(dd, + parent_dev->bus->parent->self); + } + } + } +} + +/* + * Called for each supported PCI device detected. + * + * This function allocates the private data structure, enables the + * PCI device and then calls the block layer initialization function. + * + * return value + * 0 on success else an error code. + */ +static int mtip_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rv = 0; + struct driver_data *dd = NULL; + char cpu_list[256]; + const struct cpumask *node_mask; + int cpu, i = 0, j = 0; + int my_node = NUMA_NO_NODE; + + /* Allocate memory for this devices private data. */ + my_node = pcibus_to_node(pdev->bus); + if (my_node != NUMA_NO_NODE) { + if (!node_online(my_node)) + my_node = mtip_get_next_rr_node(); + } else { + dev_info(&pdev->dev, "Kernel not reporting proximity, choosing a node\n"); + my_node = mtip_get_next_rr_node(); + } + dev_info(&pdev->dev, "NUMA node %d (closest: %d,%d, probe on %d:%d)\n", + my_node, pcibus_to_node(pdev->bus), dev_to_node(&pdev->dev), + cpu_to_node(raw_smp_processor_id()), raw_smp_processor_id()); + + dd = kzalloc_node(sizeof(struct driver_data), GFP_KERNEL, my_node); + if (!dd) + return -ENOMEM; + + /* Attach the private data to this PCI device. */ + pci_set_drvdata(pdev, dd); + + rv = pcim_enable_device(pdev); + if (rv < 0) { + dev_err(&pdev->dev, "Unable to enable device\n"); + goto iomap_err; + } + + /* Map BAR5 to memory. */ + rv = pcim_iomap_regions(pdev, 1 << MTIP_ABAR, MTIP_DRV_NAME); + if (rv < 0) { + dev_err(&pdev->dev, "Unable to map regions\n"); + goto iomap_err; + } + + rv = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (rv) { + dev_warn(&pdev->dev, "64-bit DMA enable failed\n"); + goto setmask_err; + } + + /* Copy the info we may need later into the private data structure. */ + dd->major = mtip_major; + dd->instance = instance; + dd->pdev = pdev; + dd->numa_node = my_node; + + memset(dd->workq_name, 0, 32); + snprintf(dd->workq_name, 31, "mtipq%d", dd->instance); + + dd->isr_workq = create_workqueue(dd->workq_name); + if (!dd->isr_workq) { + dev_warn(&pdev->dev, "Can't create wq %d\n", dd->instance); + rv = -ENOMEM; + goto setmask_err; + } + + memset(cpu_list, 0, sizeof(cpu_list)); + + node_mask = cpumask_of_node(dd->numa_node); + if (!cpumask_empty(node_mask)) { + for_each_cpu(cpu, node_mask) + { + snprintf(&cpu_list[j], 256 - j, "%d ", cpu); + j = strlen(cpu_list); + } + + dev_info(&pdev->dev, "Node %d on package %d has %d cpu(s): %s\n", + dd->numa_node, + topology_physical_package_id(cpumask_first(node_mask)), + nr_cpus_node(dd->numa_node), + cpu_list); + } else + dev_dbg(&pdev->dev, "mtip32xx: node_mask empty\n"); + + dd->isr_binding = get_least_used_cpu_on_node(dd->numa_node); + dev_info(&pdev->dev, "Initial IRQ binding node:cpu %d:%d\n", + cpu_to_node(dd->isr_binding), dd->isr_binding); + + /* first worker context always runs in ISR */ + dd->work[0].cpu_binding = dd->isr_binding; + dd->work[1].cpu_binding = get_least_used_cpu_on_node(dd->numa_node); + dd->work[2].cpu_binding = get_least_used_cpu_on_node(dd->numa_node); + dd->work[3].cpu_binding = dd->work[0].cpu_binding; + dd->work[4].cpu_binding = dd->work[1].cpu_binding; + dd->work[5].cpu_binding = dd->work[2].cpu_binding; + dd->work[6].cpu_binding = dd->work[2].cpu_binding; + dd->work[7].cpu_binding = dd->work[1].cpu_binding; + + /* Log the bindings */ + for_each_present_cpu(cpu) { + memset(cpu_list, 0, sizeof(cpu_list)); + for (i = 0, j = 0; i < MTIP_MAX_SLOT_GROUPS; i++) { + if (dd->work[i].cpu_binding == cpu) { + snprintf(&cpu_list[j], 256 - j, "%d ", i); + j = strlen(cpu_list); + } + } + if (j) + dev_info(&pdev->dev, "CPU %d: WQs %s\n", cpu, cpu_list); + } + + INIT_WORK(&dd->work[0].work, mtip_workq_sdbf0); + INIT_WORK(&dd->work[1].work, mtip_workq_sdbf1); + INIT_WORK(&dd->work[2].work, mtip_workq_sdbf2); + INIT_WORK(&dd->work[3].work, mtip_workq_sdbf3); + INIT_WORK(&dd->work[4].work, mtip_workq_sdbf4); + INIT_WORK(&dd->work[5].work, mtip_workq_sdbf5); + INIT_WORK(&dd->work[6].work, mtip_workq_sdbf6); + INIT_WORK(&dd->work[7].work, mtip_workq_sdbf7); + + pci_set_master(pdev); + rv = pci_enable_msi(pdev); + if (rv) { + dev_warn(&pdev->dev, + "Unable to enable MSI interrupt.\n"); + goto msi_initialize_err; + } + + mtip_fix_ero_nosnoop(dd, pdev); + + /* Initialize the block layer. */ + rv = mtip_block_initialize(dd); + if (rv < 0) { + dev_err(&pdev->dev, + "Unable to initialize block layer\n"); + goto block_initialize_err; + } + + /* + * Increment the instance count so that each device has a unique + * instance number. + */ + instance++; + if (rv != MTIP_FTL_REBUILD_MAGIC) + set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); + else + rv = 0; /* device in rebuild state, return 0 from probe */ + + goto done; + +block_initialize_err: + pci_disable_msi(pdev); + +msi_initialize_err: + if (dd->isr_workq) { + destroy_workqueue(dd->isr_workq); + drop_cpu(dd->work[0].cpu_binding); + drop_cpu(dd->work[1].cpu_binding); + drop_cpu(dd->work[2].cpu_binding); + } +setmask_err: + pcim_iounmap_regions(pdev, 1 << MTIP_ABAR); + +iomap_err: + kfree(dd); + pci_set_drvdata(pdev, NULL); + return rv; +done: + return rv; +} + +/* + * Called for each probed device when the device is removed or the + * driver is unloaded. + * + * return value + * None + */ +static void mtip_pci_remove(struct pci_dev *pdev) +{ + struct driver_data *dd = pci_get_drvdata(pdev); + unsigned long to; + + mtip_check_surprise_removal(dd); + synchronize_irq(dd->pdev->irq); + + /* Spin until workers are done */ + to = jiffies + msecs_to_jiffies(4000); + do { + msleep(20); + } while (atomic_read(&dd->irq_workers_active) != 0 && + time_before(jiffies, to)); + + if (atomic_read(&dd->irq_workers_active) != 0) { + dev_warn(&dd->pdev->dev, + "Completion workers still active!\n"); + } + + set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag); + + if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) + del_gendisk(dd->disk); + + mtip_hw_debugfs_exit(dd); + + if (dd->mtip_svc_handler) { + set_bit(MTIP_PF_SVC_THD_STOP_BIT, &dd->port->flags); + wake_up_interruptible(&dd->port->svc_wait); + kthread_stop(dd->mtip_svc_handler); + } + + if (!dd->sr) { + /* + * Explicitly wait here for IOs to quiesce, + * as mtip_standby_drive usually won't wait for IOs. + */ + if (!mtip_quiesce_io(dd->port, MTIP_QUIESCE_IO_TIMEOUT_MS)) + mtip_standby_drive(dd); + } + else + dev_info(&dd->pdev->dev, "device %s surprise removal\n", + dd->disk->disk_name); + + blk_mq_free_tag_set(&dd->tags); + + /* De-initialize the protocol layer. */ + mtip_hw_exit(dd); + + if (dd->isr_workq) { + destroy_workqueue(dd->isr_workq); + drop_cpu(dd->work[0].cpu_binding); + drop_cpu(dd->work[1].cpu_binding); + drop_cpu(dd->work[2].cpu_binding); + } + + pci_disable_msi(pdev); + + pcim_iounmap_regions(pdev, 1 << MTIP_ABAR); + pci_set_drvdata(pdev, NULL); + + put_disk(dd->disk); +} + +/* + * Called for each probed device when the device is suspended. + * + * return value + * 0 Success + * <0 Error + */ +static int __maybe_unused mtip_pci_suspend(struct device *dev) +{ + int rv = 0; + struct driver_data *dd = dev_get_drvdata(dev); + + set_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag); + + /* Disable ports & interrupts then send standby immediate */ + rv = mtip_block_suspend(dd); + if (rv < 0) + dev_err(dev, "Failed to suspend controller\n"); + + return rv; +} + +/* + * Called for each probed device when the device is resumed. + * + * return value + * 0 Success + * <0 Error + */ +static int __maybe_unused mtip_pci_resume(struct device *dev) +{ + int rv = 0; + struct driver_data *dd = dev_get_drvdata(dev); + + /* + * Calls hbaReset, initPort, & startPort function + * then enables interrupts + */ + rv = mtip_block_resume(dd); + if (rv < 0) + dev_err(dev, "Unable to resume\n"); + + clear_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag); + + return rv; +} + +/* + * Shutdown routine + * + * return value + * None + */ +static void mtip_pci_shutdown(struct pci_dev *pdev) +{ + struct driver_data *dd = pci_get_drvdata(pdev); + if (dd) + mtip_block_shutdown(dd); +} + +/* Table of device ids supported by this driver. */ +static const struct pci_device_id mtip_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320H_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320S_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P325M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420H_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P425M_DEVICE_ID) }, + { 0 } +}; + +static SIMPLE_DEV_PM_OPS(mtip_pci_pm_ops, mtip_pci_suspend, mtip_pci_resume); + +/* Structure that describes the PCI driver functions. */ +static struct pci_driver mtip_pci_driver = { + .name = MTIP_DRV_NAME, + .id_table = mtip_pci_tbl, + .probe = mtip_pci_probe, + .remove = mtip_pci_remove, + .driver.pm = &mtip_pci_pm_ops, + .shutdown = mtip_pci_shutdown, +}; + +MODULE_DEVICE_TABLE(pci, mtip_pci_tbl); + +/* + * Module initialization function. + * + * Called once when the module is loaded. This function allocates a major + * block device number to the Cyclone devices and registers the PCI layer + * of the driver. + * + * Return value + * 0 on success else error code. + */ +static int __init mtip_init(void) +{ + int error; + + pr_info(MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); + + /* Allocate a major block device number to use with this driver. */ + error = register_blkdev(0, MTIP_DRV_NAME); + if (error <= 0) { + pr_err("Unable to register block device (%d)\n", + error); + return -EBUSY; + } + mtip_major = error; + + dfs_parent = debugfs_create_dir("rssd", NULL); + if (IS_ERR_OR_NULL(dfs_parent)) { + pr_warn("Error creating debugfs parent\n"); + dfs_parent = NULL; + } + + /* Register our PCI operations. */ + error = pci_register_driver(&mtip_pci_driver); + if (error) { + debugfs_remove(dfs_parent); + unregister_blkdev(mtip_major, MTIP_DRV_NAME); + } + + return error; +} + +/* + * Module de-initialization function. + * + * Called once when the module is unloaded. This function deallocates + * the major block device number allocated by mtip_init() and + * unregisters the PCI layer of the driver. + * + * Return value + * none + */ +static void __exit mtip_exit(void) +{ + /* Release the allocated major block device number. */ + unregister_blkdev(mtip_major, MTIP_DRV_NAME); + + /* Unregister the PCI driver. */ + pci_unregister_driver(&mtip_pci_driver); + + debugfs_remove_recursive(dfs_parent); +} + +MODULE_AUTHOR("Micron Technology, Inc"); +MODULE_DESCRIPTION("Micron RealSSD PCIe Block Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(MTIP_DRV_VERSION); + +module_init(mtip_init); +module_exit(mtip_exit); diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h new file mode 100644 index 0000000000..f7328f19ac --- /dev/null +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -0,0 +1,467 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * mtip32xx.h - Header file for the P320 SSD Block Driver + * Copyright (C) 2011 Micron Technology, Inc. + * + * Portions of this code were derived from works subjected to the + * following copyright: + * Copyright (C) 2009 Integrated Device Technology, Inc. + */ + +#ifndef __MTIP32XX_H__ +#define __MTIP32XX_H__ + +#include <linux/spinlock.h> +#include <linux/rwsem.h> +#include <linux/ata.h> +#include <linux/interrupt.h> + +/* Offset of Subsystem Device ID in pci confoguration space */ +#define PCI_SUBSYSTEM_DEVICEID 0x2E + +/* offset of Device Control register in PCIe extended capabilites space */ +#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 + +/* check for erase mode support during secure erase */ +#define MTIP_SEC_ERASE_MODE 0x2 + +/* # of times to retry timed out/failed IOs */ +#define MTIP_MAX_RETRIES 2 + +/* Various timeout values in ms */ +#define MTIP_NCQ_CMD_TIMEOUT_MS 15000 +#define MTIP_IOCTL_CMD_TIMEOUT_MS 5000 +#define MTIP_INT_CMD_TIMEOUT_MS 5000 +#define MTIP_QUIESCE_IO_TIMEOUT_MS (MTIP_NCQ_CMD_TIMEOUT_MS * \ + (MTIP_MAX_RETRIES + 1)) + +/* check for timeouts every 500ms */ +#define MTIP_TIMEOUT_CHECK_PERIOD 500 + +/* ftl rebuild */ +#define MTIP_FTL_REBUILD_OFFSET 142 +#define MTIP_FTL_REBUILD_MAGIC 0xED51 +#define MTIP_FTL_REBUILD_TIMEOUT_MS 2400000 + +/* unaligned IO handling */ +#define MTIP_MAX_UNALIGNED_SLOTS 2 + +/* Macro to extract the tag bit number from a tag value. */ +#define MTIP_TAG_BIT(tag) (tag & 0x1F) + +/* + * Macro to extract the tag index from a tag value. The index + * is used to access the correct s_active/Command Issue register based + * on the tag value. + */ +#define MTIP_TAG_INDEX(tag) (tag >> 5) + +/* + * Maximum number of scatter gather entries + * a single command may have. + */ +#define MTIP_MAX_SG 504 + +/* + * Maximum number of slot groups (Command Issue & s_active registers) + * NOTE: This is the driver maximum; check dd->slot_groups for actual value. + */ +#define MTIP_MAX_SLOT_GROUPS 8 + +/* Internal command tag. */ +#define MTIP_TAG_INTERNAL 0 + +/* Micron Vendor ID & P320x SSD Device ID */ +#define PCI_VENDOR_ID_MICRON 0x1344 +#define P320H_DEVICE_ID 0x5150 +#define P320M_DEVICE_ID 0x5151 +#define P320S_DEVICE_ID 0x5152 +#define P325M_DEVICE_ID 0x5153 +#define P420H_DEVICE_ID 0x5160 +#define P420M_DEVICE_ID 0x5161 +#define P425M_DEVICE_ID 0x5163 + +/* Driver name and version strings */ +#define MTIP_DRV_NAME "mtip32xx" +#define MTIP_DRV_VERSION "1.3.1" + +/* Maximum number of minor device numbers per device. */ +#define MTIP_MAX_MINORS 16 + +/* Maximum number of supported command slots. */ +#define MTIP_MAX_COMMAND_SLOTS (MTIP_MAX_SLOT_GROUPS * 32) + +/* + * Per-tag bitfield size in longs. + * Linux bit manipulation functions + * (i.e. test_and_set_bit, find_next_zero_bit) + * manipulate memory in longs, so we try to make the math work. + * take the slot groups and find the number of longs, rounding up. + * Careful! i386 and x86_64 use different size longs! + */ +#define U32_PER_LONG (sizeof(long) / sizeof(u32)) +#define SLOTBITS_IN_LONGS ((MTIP_MAX_SLOT_GROUPS + \ + (U32_PER_LONG-1))/U32_PER_LONG) + +/* BAR number used to access the HBA registers. */ +#define MTIP_ABAR 5 + +#ifdef DEBUG + #define dbg_printk(format, arg...) \ + printk(pr_fmt(format), ##arg); +#else + #define dbg_printk(format, arg...) +#endif + +#define MTIP_DFS_MAX_BUF_SIZE 1024 + +enum { + /* below are bit numbers in 'flags' defined in mtip_port */ + MTIP_PF_IC_ACTIVE_BIT = 0, /* pio/ioctl */ + MTIP_PF_EH_ACTIVE_BIT = 1, /* error handling */ + MTIP_PF_SE_ACTIVE_BIT = 2, /* secure erase */ + MTIP_PF_DM_ACTIVE_BIT = 3, /* download microcde */ + MTIP_PF_TO_ACTIVE_BIT = 9, /* timeout handling */ + MTIP_PF_PAUSE_IO = ((1 << MTIP_PF_IC_ACTIVE_BIT) | + (1 << MTIP_PF_EH_ACTIVE_BIT) | + (1 << MTIP_PF_SE_ACTIVE_BIT) | + (1 << MTIP_PF_DM_ACTIVE_BIT) | + (1 << MTIP_PF_TO_ACTIVE_BIT)), + MTIP_PF_HOST_CAP_64 = 10, /* cache HOST_CAP_64 */ + + MTIP_PF_SVC_THD_ACTIVE_BIT = 4, + MTIP_PF_ISSUE_CMDS_BIT = 5, + MTIP_PF_REBUILD_BIT = 6, + MTIP_PF_SVC_THD_STOP_BIT = 8, + + MTIP_PF_SVC_THD_WORK = ((1 << MTIP_PF_EH_ACTIVE_BIT) | + (1 << MTIP_PF_ISSUE_CMDS_BIT) | + (1 << MTIP_PF_REBUILD_BIT) | + (1 << MTIP_PF_SVC_THD_STOP_BIT) | + (1 << MTIP_PF_TO_ACTIVE_BIT)), + + /* below are bit numbers in 'dd_flag' defined in driver_data */ + MTIP_DDF_SEC_LOCK_BIT = 0, + MTIP_DDF_REMOVE_PENDING_BIT = 1, + MTIP_DDF_OVER_TEMP_BIT = 2, + MTIP_DDF_WRITE_PROTECT_BIT = 3, + MTIP_DDF_CLEANUP_BIT = 5, + MTIP_DDF_RESUME_BIT = 6, + MTIP_DDF_INIT_DONE_BIT = 7, + MTIP_DDF_REBUILD_FAILED_BIT = 8, + + MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | + (1 << MTIP_DDF_SEC_LOCK_BIT) | + (1 << MTIP_DDF_OVER_TEMP_BIT) | + (1 << MTIP_DDF_WRITE_PROTECT_BIT) | + (1 << MTIP_DDF_REBUILD_FAILED_BIT)), + +}; + +struct smart_attr { + u8 attr_id; + __le16 flags; + u8 cur; + u8 worst; + __le32 data; + u8 res[3]; +} __packed; + +struct mtip_work { + struct work_struct work; + void *port; + int cpu_binding; + u32 completed; +} ____cacheline_aligned_in_smp; + +#define DEFINE_HANDLER(group) \ + void mtip_workq_sdbf##group(struct work_struct *work) \ + { \ + struct mtip_work *w = (struct mtip_work *) work; \ + mtip_workq_sdbfx(w->port, group, w->completed); \ + } + +/* Register Frame Information Structure (FIS), host to device. */ +struct host_to_dev_fis { + /* + * FIS type. + * - 27h Register FIS, host to device. + * - 34h Register FIS, device to host. + * - 39h DMA Activate FIS, device to host. + * - 41h DMA Setup FIS, bi-directional. + * - 46h Data FIS, bi-directional. + * - 58h BIST Activate FIS, bi-directional. + * - 5Fh PIO Setup FIS, device to host. + * - A1h Set Device Bits FIS, device to host. + */ + unsigned char type; + unsigned char opts; + unsigned char command; + unsigned char features; + + union { + unsigned char lba_low; + unsigned char sector; + }; + union { + unsigned char lba_mid; + unsigned char cyl_low; + }; + union { + unsigned char lba_hi; + unsigned char cyl_hi; + }; + union { + unsigned char device; + unsigned char head; + }; + + union { + unsigned char lba_low_ex; + unsigned char sector_ex; + }; + union { + unsigned char lba_mid_ex; + unsigned char cyl_low_ex; + }; + union { + unsigned char lba_hi_ex; + unsigned char cyl_hi_ex; + }; + unsigned char features_ex; + + unsigned char sect_count; + unsigned char sect_cnt_ex; + unsigned char res2; + unsigned char control; + + unsigned int res3; +}; + +/* Command header structure. */ +struct mtip_cmd_hdr { + /* + * Command options. + * - Bits 31:16 Number of PRD entries. + * - Bits 15:8 Unused in this implementation. + * - Bit 7 Prefetch bit, informs the drive to prefetch PRD entries. + * - Bit 6 Write bit, should be set when writing data to the device. + * - Bit 5 Unused in this implementation. + * - Bits 4:0 Length of the command FIS in DWords (DWord = 4 bytes). + */ + __le32 opts; + /* This field is unsed when using NCQ. */ + union { + __le32 byte_count; + __le32 status; + }; + /* + * Lower 32 bits of the command table address associated with this + * header. The command table addresses must be 128 byte aligned. + */ + __le32 ctba; + /* + * If 64 bit addressing is used this field is the upper 32 bits + * of the command table address associated with this command. + */ + __le32 ctbau; + /* Reserved and unused. */ + u32 res[4]; +}; + +/* Command scatter gather structure (PRD). */ +struct mtip_cmd_sg { + /* + * Low 32 bits of the data buffer address. For P320 this + * address must be 8 byte aligned signified by bits 2:0 being + * set to 0. + */ + __le32 dba; + /* + * When 64 bit addressing is used this field is the upper + * 32 bits of the data buffer address. + */ + __le32 dba_upper; + /* Unused. */ + __le32 reserved; + /* + * Bit 31: interrupt when this data block has been transferred. + * Bits 30..22: reserved + * Bits 21..0: byte count (minus 1). For P320 the byte count must be + * 8 byte aligned signified by bits 2:0 being set to 1. + */ + __le32 info; +}; +struct mtip_port; + +struct mtip_int_cmd; + +/* Structure used to describe a command. */ +struct mtip_cmd { + void *command; /* ptr to command table entry */ + + dma_addr_t command_dma; /* corresponding physical address */ + + int scatter_ents; /* Number of scatter list entries used */ + + int unaligned; /* command is unaligned on 4k boundary */ + + union { + struct scatterlist sg[MTIP_MAX_SG]; /* Scatter list entries */ + struct mtip_int_cmd *icmd; + }; + + int retries; /* The number of retries left for this command. */ + + int direction; /* Data transfer direction */ + blk_status_t status; +}; + +/* Structure used to describe a port. */ +struct mtip_port { + /* Pointer back to the driver data for this port. */ + struct driver_data *dd; + /* + * Used to determine if the data pointed to by the + * identify field is valid. + */ + unsigned long identify_valid; + /* Base address of the memory mapped IO for the port. */ + void __iomem *mmio; + /* Array of pointers to the memory mapped s_active registers. */ + void __iomem *s_active[MTIP_MAX_SLOT_GROUPS]; + /* Array of pointers to the memory mapped completed registers. */ + void __iomem *completed[MTIP_MAX_SLOT_GROUPS]; + /* Array of pointers to the memory mapped Command Issue registers. */ + void __iomem *cmd_issue[MTIP_MAX_SLOT_GROUPS]; + /* + * Pointer to the beginning of the command header memory as used + * by the driver. + */ + void *command_list; + /* + * Pointer to the beginning of the command header memory as used + * by the DMA. + */ + dma_addr_t command_list_dma; + /* + * Pointer to the beginning of the RX FIS memory as used + * by the driver. + */ + void *rxfis; + /* + * Pointer to the beginning of the RX FIS memory as used + * by the DMA. + */ + dma_addr_t rxfis_dma; + /* + * Pointer to the DMA region for RX Fis, Identify, RLE10, and SMART + */ + void *block1; + /* + * DMA address of region for RX Fis, Identify, RLE10, and SMART + */ + dma_addr_t block1_dma; + /* + * Pointer to the beginning of the identify data memory as used + * by the driver. + */ + u16 *identify; + /* + * Pointer to the beginning of the identify data memory as used + * by the DMA. + */ + dma_addr_t identify_dma; + /* + * Pointer to the beginning of a sector buffer that is used + * by the driver when issuing internal commands. + */ + u16 *sector_buffer; + /* + * Pointer to the beginning of a sector buffer that is used + * by the DMA when the driver issues internal commands. + */ + dma_addr_t sector_buffer_dma; + + u16 *log_buf; + dma_addr_t log_buf_dma; + + u8 *smart_buf; + dma_addr_t smart_buf_dma; + + /* + * used to queue commands when an internal command is in progress + * or error handling is active + */ + unsigned long cmds_to_issue[SLOTBITS_IN_LONGS]; + /* Used by mtip_service_thread to wait for an event */ + wait_queue_head_t svc_wait; + /* + * indicates the state of the port. Also, helps the service thread + * to determine its action on wake up. + */ + unsigned long flags; + /* + * Timer used to complete commands that have been active for too long. + */ + unsigned long ic_pause_timer; + + /* Counter to control queue depth of unaligned IOs */ + atomic_t cmd_slot_unal; + + /* Spinlock for working around command-issue bug. */ + spinlock_t cmd_issue_lock[MTIP_MAX_SLOT_GROUPS]; +}; + +/* + * Driver private data structure. + * + * One structure is allocated per probed device. + */ +struct driver_data { + void __iomem *mmio; /* Base address of the HBA registers. */ + + int major; /* Major device number. */ + + int instance; /* Instance number. First device probed is 0, ... */ + + struct gendisk *disk; /* Pointer to our gendisk structure. */ + + struct pci_dev *pdev; /* Pointer to the PCI device structure. */ + + struct request_queue *queue; /* Our request queue. */ + + struct blk_mq_tag_set tags; /* blk_mq tags */ + + struct mtip_port *port; /* Pointer to the port data structure. */ + + unsigned product_type; /* magic value declaring the product type */ + + unsigned slot_groups; /* number of slot groups the product supports */ + + unsigned long index; /* Index to determine the disk name */ + + unsigned long dd_flag; /* NOTE: use atomic bit operations on this */ + + struct task_struct *mtip_svc_handler; /* task_struct of svc thd */ + + struct dentry *dfs_node; + + bool sr; + + int numa_node; /* NUMA support */ + + char workq_name[32]; + + struct workqueue_struct *isr_workq; + + atomic_t irq_workers_active; + + struct mtip_work work[MTIP_MAX_SLOT_GROUPS]; + + int isr_binding; + + int unal_qdepth; /* qdepth of unaligned IO queue */ +}; + +#endif |