diff options
Diffstat (limited to 'drivers/cdx/controller/mc_cdx_pcol.h')
-rw-r--r-- | drivers/cdx/controller/mc_cdx_pcol.h | 590 |
1 files changed, 590 insertions, 0 deletions
diff --git a/drivers/cdx/controller/mc_cdx_pcol.h b/drivers/cdx/controller/mc_cdx_pcol.h new file mode 100644 index 0000000000..4ccb7b5295 --- /dev/null +++ b/drivers/cdx/controller/mc_cdx_pcol.h @@ -0,0 +1,590 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Driver for AMD network controllers and boards + * + * Copyright (C) 2021, Xilinx, Inc. + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#ifndef MC_CDX_PCOL_H +#define MC_CDX_PCOL_H + +/* The current version of the MCDI protocol. */ +#define MCDI_PCOL_VERSION 2 + +/* + * Each MCDI request starts with an MCDI_HEADER, which is a 32bit + * structure, filled in by the client. + * + * 0 7 8 16 20 22 23 24 31 + * | CODE | R | LEN | SEQ | Rsvd | E | R | XFLAGS | + * | | | + * | | \--- Response + * | \------- Error + * \------------------------------ Resync (always set) + * + * The client writes its request into MC shared memory, and rings the + * doorbell. Each request is completed either by the MC writing + * back into shared memory, or by writing out an event. + * + * All MCDI commands support completion by shared memory response. Each + * request may also contain additional data (accounted for by HEADER.LEN), + * and some responses may also contain additional data (again, accounted + * for by HEADER.LEN). + * + * Some MCDI commands support completion by event, in which any associated + * response data is included in the event. + * + * The protocol requires one response to be delivered for every request; a + * request should not be sent unless the response for the previous request + * has been received (either by polling shared memory, or by receiving + * an event). + */ + +/** Request/Response structure */ +#define MCDI_HEADER_OFST 0 +#define MCDI_HEADER_CODE_LBN 0 +#define MCDI_HEADER_CODE_WIDTH 7 +#define MCDI_HEADER_RESYNC_LBN 7 +#define MCDI_HEADER_RESYNC_WIDTH 1 +#define MCDI_HEADER_DATALEN_LBN 8 +#define MCDI_HEADER_DATALEN_WIDTH 8 +#define MCDI_HEADER_SEQ_LBN 16 +#define MCDI_HEADER_SEQ_WIDTH 4 +#define MCDI_HEADER_RSVD_LBN 20 +#define MCDI_HEADER_RSVD_WIDTH 1 +#define MCDI_HEADER_NOT_EPOCH_LBN 21 +#define MCDI_HEADER_NOT_EPOCH_WIDTH 1 +#define MCDI_HEADER_ERROR_LBN 22 +#define MCDI_HEADER_ERROR_WIDTH 1 +#define MCDI_HEADER_RESPONSE_LBN 23 +#define MCDI_HEADER_RESPONSE_WIDTH 1 +#define MCDI_HEADER_XFLAGS_LBN 24 +#define MCDI_HEADER_XFLAGS_WIDTH 8 +/* Request response using event */ +#define MCDI_HEADER_XFLAGS_EVREQ 0x01 +/* Request (and signal) early doorbell return */ +#define MCDI_HEADER_XFLAGS_DBRET 0x02 + +/* Maximum number of payload bytes */ +#define MCDI_CTL_SDU_LEN_MAX_V2 0x400 + +#define MCDI_CTL_SDU_LEN_MAX MCDI_CTL_SDU_LEN_MAX_V2 + +/* + * The MC can generate events for two reasons: + * - To advance a shared memory request if XFLAGS_EVREQ was set + * - As a notification (link state, i2c event), controlled + * via MC_CMD_LOG_CTRL + * + * Both events share a common structure: + * + * 0 32 33 36 44 52 60 + * | Data | Cont | Level | Src | Code | Rsvd | + * | + * \ There is another event pending in this notification + * + * If Code==CMDDONE, then the fields are further interpreted as: + * + * - LEVEL==INFO Command succeeded + * - LEVEL==ERR Command failed + * + * 0 8 16 24 32 + * | Seq | Datalen | Errno | Rsvd | + * + * These fields are taken directly out of the standard MCDI header, i.e., + * LEVEL==ERR, Datalen == 0 => Reboot + * + * Events can be squirted out of the UART (using LOG_CTRL) without a + * MCDI header. An event can be distinguished from a MCDI response by + * examining the first byte which is 0xc0. This corresponds to the + * non-existent MCDI command MC_CMD_DEBUG_LOG. + * + * 0 7 8 + * | command | Resync | = 0xc0 + * + * Since the event is written in big-endian byte order, this works + * providing bits 56-63 of the event are 0xc0. + * + * 56 60 63 + * | Rsvd | Code | = 0xc0 + * + * Which means for convenience the event code is 0xc for all MC + * generated events. + */ + +/* + * the errno value may be followed by the (0-based) number of the + * first argument that could not be processed. + */ +#define MC_CMD_ERR_ARG_OFST 4 + +/* MC_CMD_ERR MCDI error codes. */ +/* Operation not permitted. */ +#define MC_CMD_ERR_EPERM 0x1 +/* Non-existent command target */ +#define MC_CMD_ERR_ENOENT 0x2 +/* assert() has killed the MC */ +#define MC_CMD_ERR_EINTR 0x4 +/* I/O failure */ +#define MC_CMD_ERR_EIO 0x5 +/* Already exists */ +#define MC_CMD_ERR_EEXIST 0x6 +/* Try again */ +#define MC_CMD_ERR_EAGAIN 0xb +/* Out of memory */ +#define MC_CMD_ERR_ENOMEM 0xc +/* Caller does not hold required locks */ +#define MC_CMD_ERR_EACCES 0xd +/* Resource is currently unavailable (e.g. lock contention) */ +#define MC_CMD_ERR_EBUSY 0x10 +/* No such device */ +#define MC_CMD_ERR_ENODEV 0x13 +/* Invalid argument to target */ +#define MC_CMD_ERR_EINVAL 0x16 +/* No space */ +#define MC_CMD_ERR_ENOSPC 0x1c +/* Read-only */ +#define MC_CMD_ERR_EROFS 0x1e +/* Broken pipe */ +#define MC_CMD_ERR_EPIPE 0x20 +/* Out of range */ +#define MC_CMD_ERR_ERANGE 0x22 +/* Non-recursive resource is already acquired */ +#define MC_CMD_ERR_EDEADLK 0x23 +/* Operation not implemented */ +#define MC_CMD_ERR_ENOSYS 0x26 +/* Operation timed out */ +#define MC_CMD_ERR_ETIME 0x3e +/* Link has been severed */ +#define MC_CMD_ERR_ENOLINK 0x43 +/* Protocol error */ +#define MC_CMD_ERR_EPROTO 0x47 +/* Bad message */ +#define MC_CMD_ERR_EBADMSG 0x4a +/* Operation not supported */ +#define MC_CMD_ERR_ENOTSUP 0x5f +/* Address not available */ +#define MC_CMD_ERR_EADDRNOTAVAIL 0x63 +/* Not connected */ +#define MC_CMD_ERR_ENOTCONN 0x6b +/* Operation already in progress */ +#define MC_CMD_ERR_EALREADY 0x72 +/* Stale handle. The handle references resource that no longer exists */ +#define MC_CMD_ERR_ESTALE 0x74 +/* Resource allocation failed. */ +#define MC_CMD_ERR_ALLOC_FAIL 0x1000 +/* V-adaptor not found. */ +#define MC_CMD_ERR_NO_VADAPTOR 0x1001 +/* EVB port not found. */ +#define MC_CMD_ERR_NO_EVB_PORT 0x1002 +/* V-switch not found. */ +#define MC_CMD_ERR_NO_VSWITCH 0x1003 +/* Too many VLAN tags. */ +#define MC_CMD_ERR_VLAN_LIMIT 0x1004 +/* Bad PCI function number. */ +#define MC_CMD_ERR_BAD_PCI_FUNC 0x1005 +/* Invalid VLAN mode. */ +#define MC_CMD_ERR_BAD_VLAN_MODE 0x1006 +/* Invalid v-switch type. */ +#define MC_CMD_ERR_BAD_VSWITCH_TYPE 0x1007 +/* Invalid v-port type. */ +#define MC_CMD_ERR_BAD_VPORT_TYPE 0x1008 +/* MAC address exists. */ +#define MC_CMD_ERR_MAC_EXIST 0x1009 +/* Slave core not present */ +#define MC_CMD_ERR_SLAVE_NOT_PRESENT 0x100a +/* The datapath is disabled. */ +#define MC_CMD_ERR_DATAPATH_DISABLED 0x100b +/* The requesting client is not a function */ +#define MC_CMD_ERR_CLIENT_NOT_FN 0x100c +/* + * The requested operation might require the command to be passed between + * MCs, and the transport doesn't support that. Should only ever been seen over + * the UART. + */ +#define MC_CMD_ERR_NO_PRIVILEGE 0x1013 +/* + * Workaround 26807 could not be turned on/off because some functions + * have already installed filters. See the comment at + * MC_CMD_WORKAROUND_BUG26807. May also returned for other operations such as + * sub-variant switching. + */ +#define MC_CMD_ERR_FILTERS_PRESENT 0x1014 +/* The clock whose frequency you've attempted to set doesn't exist */ +#define MC_CMD_ERR_NO_CLOCK 0x1015 +/* + * Returned by MC_CMD_TESTASSERT if the action that should have caused an + * assertion failed to do so. + */ +#define MC_CMD_ERR_UNREACHABLE 0x1016 +/* + * This command needs to be processed in the background but there were no + * resources to do so. Send it again after a command has completed. + */ +#define MC_CMD_ERR_QUEUE_FULL 0x1017 +/* + * The operation could not be completed because the PCIe link has gone + * away. This error code is never expected to be returned over the TLP + * transport. + */ +#define MC_CMD_ERR_NO_PCIE 0x1018 +/* + * The operation could not be completed because the datapath has gone + * away. This is distinct from MC_CMD_ERR_DATAPATH_DISABLED in that the + * datapath absence may be temporary + */ +#define MC_CMD_ERR_NO_DATAPATH 0x1019 +/* The operation could not complete because some VIs are allocated */ +#define MC_CMD_ERR_VIS_PRESENT 0x101a +/* + * The operation could not complete because some PIO buffers are + * allocated + */ +#define MC_CMD_ERR_PIOBUFS_PRESENT 0x101b + +/***********************************/ +/* + * MC_CMD_CDX_BUS_ENUM_BUSES + * CDX bus hosts devices (functions) that are implemented using the Composable + * DMA subsystem and directly mapped into the memory space of the FGPA PSX + * Application Processors (APUs). As such, they only apply to the PSX APU side, + * not the host (PCIe). Unlike PCIe, these devices have no native configuration + * space or enumeration mechanism, so this message set provides a minimal + * interface for discovery and management (bus reset, FLR, BME) of such + * devices. This command returns the number of CDX buses present in the system. + */ +#define MC_CMD_CDX_BUS_ENUM_BUSES 0x1 +#define MC_CMD_CDX_BUS_ENUM_BUSES_MSGSET 0x1 +#undef MC_CMD_0x1_PRIVILEGE_CTG + +#define MC_CMD_0x1_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_BUS_ENUM_BUSES_IN msgrequest */ +#define MC_CMD_CDX_BUS_ENUM_BUSES_IN_LEN 0 + +/* MC_CMD_CDX_BUS_ENUM_BUSES_OUT msgresponse */ +#define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_LEN 4 +/* + * Number of CDX buses present in the system. Buses are numbered 0 to + * BUS_COUNT-1 + */ +#define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT_OFST 0 +#define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT_LEN 4 + +/***********************************/ +/* + * MC_CMD_CDX_BUS_ENUM_DEVICES + * Enumerate CDX bus devices on a given bus + */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES 0x2 +#define MC_CMD_CDX_BUS_ENUM_DEVICES_MSGSET 0x2 +#undef MC_CMD_0x2_PRIVILEGE_CTG + +#define MC_CMD_0x2_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_BUS_ENUM_DEVICES_IN msgrequest */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_LEN 4 +/* + * Bus number to enumerate, in range 0 to BUS_COUNT-1, as returned by + * MC_CMD_CDX_BUS_ENUM_BUSES_OUT + */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_BUS_OFST 0 +#define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_BUS_LEN 4 + +/* MC_CMD_CDX_BUS_ENUM_DEVICES_OUT msgresponse */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_LEN 4 +/* + * Number of devices present on the bus. Devices on the bus are numbered 0 to + * DEVICE_COUNT-1. Returns EAGAIN if number of devices unknown or if the target + * devices are not ready (e.g. undergoing a bus reset) + */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT_OFST 0 +#define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT_LEN 4 + +/***********************************/ +/* + * MC_CMD_CDX_BUS_GET_DEVICE_CONFIG + * Returns device identification and MMIO/MSI resource data for a CDX device. + * The expected usage is for the caller to first retrieve the number of devices + * on the bus using MC_CMD_BUS_ENUM_DEVICES, then loop through the range (0, + * DEVICE_COUNT - 1), retrieving device resource data. May return EAGAIN if the + * number of exposed devices or device resources change during enumeration (due + * to e.g. a PL reload / bus reset), in which case the caller is expected to + * restart the enumeration loop. MMIO addresses are specified in terms of bus + * addresses (prior to any potential IOMMU translation). For versal-net, these + * are equivalent to APU physical addresses. Implementation note - for this to + * work, the implementation needs to keep state (generation count) per client. + */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG 0x3 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_MSGSET 0x3 +#undef MC_CMD_0x3_PRIVILEGE_CTG + +#define MC_CMD_0x3_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN msgrequest */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_LEN 8 +/* Device bus number, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_BUS_OFST 0 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_BUS_LEN 4 +/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE_OFST 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE_LEN 4 + +/* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT msgresponse */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN 88 +/* 16-bit Vendor identifier, compliant with PCI-SIG VendorID assignment. */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID_OFST 0 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID_LEN 2 +/* 16-bit Device ID assigned by the vendor */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID_OFST 2 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID_LEN 2 +/* + * 16-bit Subsystem Vendor ID, , compliant with PCI-SIG VendorID assignment. + * For further device differentiation, as required. 0 if unused. + */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_VENDOR_ID_OFST 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_VENDOR_ID_LEN 2 +/* + * 16-bit Subsystem Device ID assigned by the vendor. For further device + * differentiation, as required. 0 if unused. + */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_DEVICE_ID_OFST 6 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_DEVICE_ID_LEN 2 +/* 24-bit Device Class code, compliant with PCI-SIG Device Class codes */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS_OFST 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS_LEN 3 +/* 8-bit vendor-assigned revision */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION_OFST 11 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION_LEN 1 +/* Reserved (alignment) */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_RESERVED_OFST 12 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_RESERVED_LEN 4 +/* MMIO region 0 base address (bus address), 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_OFST 16 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_OFST 16 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_LBN 128 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_OFST 20 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_LBN 160 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_WIDTH 32 +/* MMIO region 0 size, 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_OFST 24 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_OFST 24 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_LBN 192 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_OFST 28 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_LBN 224 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_WIDTH 32 +/* MMIO region 1 base address (bus address), 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_OFST 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_OFST 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_LBN 256 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_OFST 36 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_LBN 288 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_WIDTH 32 +/* MMIO region 1 size, 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_OFST 40 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_OFST 40 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_LBN 320 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_OFST 44 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_LBN 352 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_WIDTH 32 +/* MMIO region 2 base address (bus address), 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_OFST 48 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_OFST 48 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_LBN 384 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_OFST 52 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_LBN 416 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_WIDTH 32 +/* MMIO region 2 size, 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_OFST 56 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_OFST 56 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_LBN 448 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_OFST 60 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_LBN 480 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_WIDTH 32 +/* MMIO region 3 base address (bus address), 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_OFST 64 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_OFST 64 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_LBN 512 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_OFST 68 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_LBN 544 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_WIDTH 32 +/* MMIO region 3 size, 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_OFST 72 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_OFST 72 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_LBN 576 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_OFST 76 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_LBN 608 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_WIDTH 32 +/* MSI vector count */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MSI_COUNT_OFST 80 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MSI_COUNT_LEN 4 +/* Requester ID used by device (SMMU StreamID, GIC ITS DeviceID) */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_OFST 84 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_LEN 4 + +/***********************************/ +/* + * MC_CMD_CDX_DEVICE_RESET + * After this call completes, device DMA and interrupts are quiesced, devices + * logic is reset in a hardware-specific way and DMA bus mastering is disabled. + */ +#define MC_CMD_CDX_DEVICE_RESET 0x6 +#define MC_CMD_CDX_DEVICE_RESET_MSGSET 0x6 +#undef MC_CMD_0x6_PRIVILEGE_CTG + +#define MC_CMD_0x6_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_DEVICE_RESET_IN msgrequest */ +#define MC_CMD_CDX_DEVICE_RESET_IN_LEN 8 +/* Device bus number, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_DEVICE_RESET_IN_BUS_OFST 0 +#define MC_CMD_CDX_DEVICE_RESET_IN_BUS_LEN 4 +/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ +#define MC_CMD_CDX_DEVICE_RESET_IN_DEVICE_OFST 4 +#define MC_CMD_CDX_DEVICE_RESET_IN_DEVICE_LEN 4 + +/* + * MC_CMD_CDX_DEVICE_RESET_OUT msgresponse: The device is quiesced and all + * pending device initiated DMA has completed. + */ +#define MC_CMD_CDX_DEVICE_RESET_OUT_LEN 0 + +/***********************************/ +/* + * MC_CMD_CDX_DEVICE_CONTROL_SET + * If BUS_MASTER is set to disabled, device DMA and interrupts are quiesced. + * Pending DMA requests and MSI interrupts are flushed and no further DMA or + * interrupts are issued after this command returns. If BUS_MASTER is set to + * enabled, device is allowed to initiate DMA. Whether interrupts are enabled + * also depends on the value of MSI_ENABLE bit. Note that, in this case, the + * device may start DMA before the host receives and processes the MCDI + * response. MSI_ENABLE masks or unmasks device interrupts only. Note that for + * interrupts to be delivered to the host, both BUS_MASTER and MSI_ENABLE needs + * to be set. MMIO_REGIONS_ENABLE enables or disables host accesses to device + * MMIO regions. Note that an implementation is allowed to permanently set this + * bit to 1, in which case MC_CMD_CDX_DEVICE_CONTROL_GET will always return 1 + * for this bit, regardless of the value set here. + */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET 0x7 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_MSGSET 0x7 +#undef MC_CMD_0x7_PRIVILEGE_CTG + +#define MC_CMD_0x7_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_DEVICE_CONTROL_SET_IN msgrequest */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_LEN 12 +/* Device bus number, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_LEN 4 +/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_DEVICE_OFST 4 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_DEVICE_LEN 4 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_FLAGS_OFST 8 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_FLAGS_LEN 4 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_OFST 8 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_LBN 0 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_WIDTH 1 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_OFST 8 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_LBN 1 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_WIDTH 1 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_OFST 8 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_LBN 2 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_WIDTH 1 + +/* MC_CMD_CDX_DEVICE_CONTROL_SET_OUT msgresponse */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET_OUT_LEN 0 + +/***********************************/ +/* + * MC_CMD_CDX_DEVICE_CONTROL_GET + * Returns device DMA, interrupt and MMIO region access control bits. See + * MC_CMD_CDX_DEVICE_CONTROL_SET for definition of the available control bits. + */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET 0x8 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_MSGSET 0x8 +#undef MC_CMD_0x8_PRIVILEGE_CTG + +#define MC_CMD_0x8_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_DEVICE_CONTROL_GET_IN msgrequest */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_LEN 8 +/* Device bus number, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_BUS_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_BUS_LEN 4 +/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_DEVICE_OFST 4 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_DEVICE_LEN 4 + +/* MC_CMD_CDX_DEVICE_CONTROL_GET_OUT msgresponse */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_LEN 4 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_FLAGS_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_FLAGS_LEN 4 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_LBN 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_WIDTH 1 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_LBN 1 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_WIDTH 1 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_LBN 2 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_WIDTH 1 + +/***********************************/ +/* MC_CMD_V2_EXTN - Encapsulation for a v2 extended command */ +#define MC_CMD_V2_EXTN 0x7f + +/* MC_CMD_V2_EXTN_IN msgrequest */ +#define MC_CMD_V2_EXTN_IN_LEN 4 +/* the extended command number */ +#define MC_CMD_V2_EXTN_IN_EXTENDED_CMD_LBN 0 +#define MC_CMD_V2_EXTN_IN_EXTENDED_CMD_WIDTH 15 +#define MC_CMD_V2_EXTN_IN_UNUSED_LBN 15 +#define MC_CMD_V2_EXTN_IN_UNUSED_WIDTH 1 +/* the actual length of the encapsulated command */ +#define MC_CMD_V2_EXTN_IN_ACTUAL_LEN_LBN 16 +#define MC_CMD_V2_EXTN_IN_ACTUAL_LEN_WIDTH 10 +#define MC_CMD_V2_EXTN_IN_UNUSED2_LBN 26 +#define MC_CMD_V2_EXTN_IN_UNUSED2_WIDTH 2 +/* Type of command/response */ +#define MC_CMD_V2_EXTN_IN_MESSAGE_TYPE_LBN 28 +#define MC_CMD_V2_EXTN_IN_MESSAGE_TYPE_WIDTH 4 +/* + * enum: MCDI command directed to versal-net. MCDI responses of this type + * are not defined. + */ +#define MC_CMD_V2_EXTN_IN_MCDI_MESSAGE_TYPE_PLATFORM 0x2 + +#endif /* MC_CDX_PCOL_H */ |