diff options
Diffstat (limited to 'drivers/clk/pxa')
| -rw-r--r-- | drivers/clk/pxa/Makefile | 5 | ||||
| -rw-r--r-- | drivers/clk/pxa/clk-pxa.c | 251 | ||||
| -rw-r--r-- | drivers/clk/pxa/clk-pxa.h | 162 | ||||
| -rw-r--r-- | drivers/clk/pxa/clk-pxa25x.c | 341 | ||||
| -rw-r--r-- | drivers/clk/pxa/clk-pxa27x.c | 484 | ||||
| -rw-r--r-- | drivers/clk/pxa/clk-pxa2xx.h | 58 | ||||
| -rw-r--r-- | drivers/clk/pxa/clk-pxa3xx.c | 463 |
7 files changed, 1764 insertions, 0 deletions
diff --git a/drivers/clk/pxa/Makefile b/drivers/clk/pxa/Makefile new file mode 100644 index 0000000000..da663c215d --- /dev/null +++ b/drivers/clk/pxa/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-y += clk-pxa.o +obj-$(CONFIG_PXA25x) += clk-pxa25x.o +obj-$(CONFIG_PXA27x) += clk-pxa27x.o +obj-$(CONFIG_PXA3xx) += clk-pxa3xx.o diff --git a/drivers/clk/pxa/clk-pxa.c b/drivers/clk/pxa/clk-pxa.c new file mode 100644 index 0000000000..ebee2afd05 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa.c @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Marvell PXA family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Common clock code for PXA clocks ("CKEN" type clocks + DT) + */ +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/soc/pxa/smemc.h> + +#include <dt-bindings/clock/pxa-clock.h> +#include "clk-pxa.h" + +#define KHz 1000 +#define MHz (1000 * 1000) + +#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ +#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ +#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ +#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ +#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ +#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ +#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ +#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ +#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ +#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ +#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ +#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ +#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ +#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ +#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) +#define MDREFR_DRI_MASK 0xFFF + +static DEFINE_SPINLOCK(pxa_clk_lock); + +static struct clk *pxa_clocks[CLK_MAX]; +static struct clk_onecell_data onecell_data = { + .clks = pxa_clocks, + .clk_num = CLK_MAX, +}; + +struct pxa_clk { + struct clk_hw hw; + struct clk_fixed_factor lp; + struct clk_fixed_factor hp; + struct clk_gate gate; + bool (*is_in_low_power)(void); +}; + +#define to_pxa_clk(_hw) container_of(_hw, struct pxa_clk, hw) + +static unsigned long cken_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct pxa_clk *pclk = to_pxa_clk(hw); + struct clk_fixed_factor *fix; + + if (!pclk->is_in_low_power || pclk->is_in_low_power()) + fix = &pclk->lp; + else + fix = &pclk->hp; + __clk_hw_set_clk(&fix->hw, hw); + return clk_fixed_factor_ops.recalc_rate(&fix->hw, parent_rate); +} + +static const struct clk_ops cken_rate_ops = { + .recalc_rate = cken_recalc_rate, +}; + +static u8 cken_get_parent(struct clk_hw *hw) +{ + struct pxa_clk *pclk = to_pxa_clk(hw); + + if (!pclk->is_in_low_power) + return 0; + return pclk->is_in_low_power() ? 0 : 1; +} + +static const struct clk_ops cken_mux_ops = { + .determine_rate = clk_hw_determine_rate_no_reparent, + .get_parent = cken_get_parent, + .set_parent = dummy_clk_set_parent, +}; + +void __init clkdev_pxa_register(int ckid, const char *con_id, + const char *dev_id, struct clk *clk) +{ + if (!IS_ERR(clk) && (ckid != CLK_NONE)) + pxa_clocks[ckid] = clk; + if (!IS_ERR(clk)) + clk_register_clkdev(clk, con_id, dev_id); +} + +int __init clk_pxa_cken_init(const struct desc_clk_cken *clks, + int nb_clks, void __iomem *clk_regs) +{ + int i; + struct pxa_clk *pxa_clk; + struct clk *clk; + + for (i = 0; i < nb_clks; i++) { + pxa_clk = kzalloc(sizeof(*pxa_clk), GFP_KERNEL); + if (!pxa_clk) + return -ENOMEM; + pxa_clk->is_in_low_power = clks[i].is_in_low_power; + pxa_clk->lp = clks[i].lp; + pxa_clk->hp = clks[i].hp; + pxa_clk->gate = clks[i].gate; + pxa_clk->gate.reg = clk_regs + clks[i].cken_reg; + pxa_clk->gate.lock = &pxa_clk_lock; + clk = clk_register_composite(NULL, clks[i].name, + clks[i].parent_names, 2, + &pxa_clk->hw, &cken_mux_ops, + &pxa_clk->hw, &cken_rate_ops, + &pxa_clk->gate.hw, &clk_gate_ops, + clks[i].flags); + clkdev_pxa_register(clks[i].ckid, clks[i].con_id, + clks[i].dev_id, clk); + } + return 0; +} + +void __init clk_pxa_dt_common_init(struct device_node *np) +{ + of_clk_add_provider(np, of_clk_src_onecell_get, &onecell_data); +} + +void pxa2xx_core_turbo_switch(bool on) +{ + unsigned long flags; + unsigned int unused, clkcfg; + + local_irq_save(flags); + + asm("mrc p14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + clkcfg &= ~CLKCFG_TURBO & ~CLKCFG_HALFTURBO; + if (on) + clkcfg |= CLKCFG_TURBO; + clkcfg |= CLKCFG_FCS; + + asm volatile( + " b 2f\n" + " .align 5\n" + "1: mcr p14, 0, %1, c6, c0, 0\n" + " b 3f\n" + "2: b 1b\n" + "3: nop\n" + : "=&r" (unused) : "r" (clkcfg)); + + local_irq_restore(flags); +} + +void pxa2xx_cpll_change(struct pxa2xx_freq *freq, + u32 (*mdrefr_dri)(unsigned int), + void __iomem *cccr) +{ + unsigned int clkcfg = freq->clkcfg; + unsigned int unused, preset_mdrefr, postset_mdrefr; + unsigned long flags; + void __iomem *mdrefr = pxa_smemc_get_mdrefr(); + + local_irq_save(flags); + + /* Calculate the next MDREFR. If we're slowing down the SDRAM clock + * we need to preset the smaller DRI before the change. If we're + * speeding up we need to set the larger DRI value after the change. + */ + preset_mdrefr = postset_mdrefr = readl(mdrefr); + if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(freq->membus_khz)) { + preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK); + preset_mdrefr |= mdrefr_dri(freq->membus_khz); + } + postset_mdrefr = + (postset_mdrefr & ~MDREFR_DRI_MASK) | + mdrefr_dri(freq->membus_khz); + + /* If we're dividing the memory clock by two for the SDRAM clock, this + * must be set prior to the change. Clearing the divide must be done + * after the change. + */ + if (freq->div2) { + preset_mdrefr |= MDREFR_DB2_MASK; + postset_mdrefr |= MDREFR_DB2_MASK; + } else { + postset_mdrefr &= ~MDREFR_DB2_MASK; + } + + /* Set new the CCCR and prepare CLKCFG */ + writel(freq->cccr, cccr); + + asm volatile( + " ldr r4, [%1]\n" + " b 2f\n" + " .align 5\n" + "1: str %3, [%1] /* preset the MDREFR */\n" + " mcr p14, 0, %2, c6, c0, 0 /* set CLKCFG[FCS] */\n" + " str %4, [%1] /* postset the MDREFR */\n" + " b 3f\n" + "2: b 1b\n" + "3: nop\n" + : "=&r" (unused) + : "r" (mdrefr), "r" (clkcfg), "r" (preset_mdrefr), + "r" (postset_mdrefr) + : "r4", "r5"); + + local_irq_restore(flags); +} + +int pxa2xx_determine_rate(struct clk_rate_request *req, + struct pxa2xx_freq *freqs, int nb_freqs) +{ + int i, closest_below = -1, closest_above = -1; + unsigned long rate; + + for (i = 0; i < nb_freqs; i++) { + rate = freqs[i].cpll; + if (rate == req->rate) + break; + if (rate < req->min_rate) + continue; + if (rate > req->max_rate) + continue; + if (rate <= req->rate) + closest_below = i; + if ((rate >= req->rate) && (closest_above == -1)) + closest_above = i; + } + + req->best_parent_hw = NULL; + + if (i < nb_freqs) { + rate = req->rate; + } else if (closest_below >= 0) { + rate = freqs[closest_below].cpll; + } else if (closest_above >= 0) { + rate = freqs[closest_above].cpll; + } else { + pr_debug("%s(rate=%lu) no match\n", __func__, req->rate); + return -EINVAL; + } + + pr_debug("%s(rate=%lu) rate=%lu\n", __func__, req->rate, rate); + req->rate = rate; + + return 0; +} diff --git a/drivers/clk/pxa/clk-pxa.h b/drivers/clk/pxa/clk-pxa.h new file mode 100644 index 0000000000..7ec2d2821d --- /dev/null +++ b/drivers/clk/pxa/clk-pxa.h @@ -0,0 +1,162 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Marvell PXA family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Common clock code for PXA clocks ("CKEN" type clocks + DT) + */ +#ifndef _CLK_PXA_ +#define _CLK_PXA_ + +#define CLKCFG_TURBO 0x1 +#define CLKCFG_FCS 0x2 +#define CLKCFG_HALFTURBO 0x4 +#define CLKCFG_FASTBUS 0x8 + +#define PARENTS(name) \ + static const char *const name ## _parents[] __initconst +#define MUX_RO_RATE_RO_OPS(name, clk_name) \ + static struct clk_hw name ## _mux_hw; \ + static struct clk_hw name ## _rate_hw; \ + static const struct clk_ops name ## _mux_ops = { \ + .get_parent = name ## _get_parent, \ + .set_parent = dummy_clk_set_parent, \ + }; \ + static const struct clk_ops name ## _rate_ops = { \ + .recalc_rate = name ## _get_rate, \ + }; \ + static struct clk * __init clk_register_ ## name(void) \ + { \ + return clk_register_composite(NULL, clk_name, \ + name ## _parents, \ + ARRAY_SIZE(name ## _parents), \ + &name ## _mux_hw, &name ## _mux_ops, \ + &name ## _rate_hw, &name ## _rate_ops, \ + NULL, NULL, CLK_GET_RATE_NOCACHE); \ + } + +#define RATE_RO_OPS(name, clk_name) \ + static struct clk_hw name ## _rate_hw; \ + static const struct clk_ops name ## _rate_ops = { \ + .recalc_rate = name ## _get_rate, \ + }; \ + static struct clk * __init clk_register_ ## name(void) \ + { \ + return clk_register_composite(NULL, clk_name, \ + name ## _parents, \ + ARRAY_SIZE(name ## _parents), \ + NULL, NULL, \ + &name ## _rate_hw, &name ## _rate_ops, \ + NULL, NULL, CLK_GET_RATE_NOCACHE); \ + } + +#define RATE_OPS(name, clk_name) \ + static struct clk_hw name ## _rate_hw; \ + static const struct clk_ops name ## _rate_ops = { \ + .recalc_rate = name ## _get_rate, \ + .set_rate = name ## _set_rate, \ + .determine_rate = name ## _determine_rate, \ + }; \ + static struct clk * __init clk_register_ ## name(void) \ + { \ + return clk_register_composite(NULL, clk_name, \ + name ## _parents, \ + ARRAY_SIZE(name ## _parents), \ + NULL, NULL, \ + &name ## _rate_hw, &name ## _rate_ops, \ + NULL, NULL, CLK_GET_RATE_NOCACHE); \ + } + +#define MUX_OPS(name, clk_name, flags) \ + static struct clk_hw name ## _mux_hw; \ + static const struct clk_ops name ## _mux_ops = { \ + .get_parent = name ## _get_parent, \ + .set_parent = name ## _set_parent, \ + .determine_rate = name ## _determine_rate, \ + }; \ + static struct clk * __init clk_register_ ## name(void) \ + { \ + return clk_register_composite(NULL, clk_name, \ + name ## _parents, \ + ARRAY_SIZE(name ## _parents), \ + &name ## _mux_hw, &name ## _mux_ops, \ + NULL, NULL, \ + NULL, NULL, \ + CLK_GET_RATE_NOCACHE | flags); \ + } + +/* + * CKEN clock type + * This clock takes it source from 2 possible parents : + * - a low power parent + * - a normal parent + * + * +------------+ +-----------+ + * | Low Power | --- | x mult_lp | + * | Clock | | / div_lp |\ + * +------------+ +-----------+ \+-----+ +-----------+ + * | Mux |---| CKEN gate | + * +------------+ +-----------+ /+-----+ +-----------+ + * | High Power | | x mult_hp |/ + * | Clock | --- | / div_hp | + * +------------+ +-----------+ + */ +struct desc_clk_cken { + struct clk_hw hw; + int ckid; + int cken_reg; + const char *name; + const char *dev_id; + const char *con_id; + const char * const *parent_names; + struct clk_fixed_factor lp; + struct clk_fixed_factor hp; + struct clk_gate gate; + bool (*is_in_low_power)(void); + const unsigned long flags; +}; + +#define PXA_CKEN(_dev_id, _con_id, _name, parents, _mult_lp, _div_lp, \ + _mult_hp, _div_hp, is_lp, _cken_reg, _cken_bit, flag) \ + { .ckid = CLK_ ## _name, .name = #_name, \ + .cken_reg = _cken_reg, \ + .dev_id = _dev_id, .con_id = _con_id, .parent_names = parents,\ + .lp = { .mult = _mult_lp, .div = _div_lp }, \ + .hp = { .mult = _mult_hp, .div = _div_hp }, \ + .is_in_low_power = is_lp, \ + .gate = { .bit_idx = _cken_bit }, \ + .flags = flag, \ + } +#define PXA_CKEN_1RATE(dev_id, con_id, name, parents, cken_reg, \ + cken_bit, flag) \ + PXA_CKEN(dev_id, con_id, name, parents, 1, 1, 1, 1, \ + NULL, cken_reg, cken_bit, flag) + +struct pxa2xx_freq { + unsigned long cpll; + unsigned int membus_khz; + unsigned int cccr; + unsigned int div2; + unsigned int clkcfg; +}; + +static inline int dummy_clk_set_parent(struct clk_hw *hw, u8 index) +{ + return 0; +} + +extern void clkdev_pxa_register(int ckid, const char *con_id, + const char *dev_id, struct clk *clk); +extern int clk_pxa_cken_init(const struct desc_clk_cken *clks, + int nb_clks, void __iomem *clk_regs); +void clk_pxa_dt_common_init(struct device_node *np); + +void pxa2xx_core_turbo_switch(bool on); +void pxa2xx_cpll_change(struct pxa2xx_freq *freq, + u32 (*mdrefr_dri)(unsigned int), + void __iomem *cccr); +int pxa2xx_determine_rate(struct clk_rate_request *req, + struct pxa2xx_freq *freqs, int nb_freqs); + +#endif diff --git a/drivers/clk/pxa/clk-pxa25x.c b/drivers/clk/pxa/clk-pxa25x.c new file mode 100644 index 0000000000..0a4da519d7 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa25x.c @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Marvell PXA25x family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Heavily inspired from former arch/arm/mach-pxa/pxa25x.c. + * + * For non-devicetree platforms. Once pxa is fully converted to devicetree, this + * should go away. + */ +#include <linux/clk-provider.h> +#include <linux/clk.h> +#include <linux/clk/pxa.h> +#include <linux/clkdev.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/soc/pxa/smemc.h> +#include <linux/soc/pxa/cpu.h> + +#include <dt-bindings/clock/pxa-clock.h> +#include "clk-pxa.h" +#include "clk-pxa2xx.h" + +#define KHz 1000 +#define MHz (1000 * 1000) + +enum { + PXA_CORE_RUN = 0, + PXA_CORE_TURBO, +}; + +#define PXA25x_CLKCFG(T) \ + (CLKCFG_FCS | \ + ((T) ? CLKCFG_TURBO : 0)) +#define PXA25x_CCCR(N2, M, L) (N2 << 7 | M << 5 | L) + +/* Define the refresh period in mSec for the SDRAM and the number of rows */ +#define SDRAM_TREF 64 /* standard 64ms SDRAM */ + +/* + * Various clock factors driven by the CCCR register. + */ +static void __iomem *clk_regs; + +/* Crystal Frequency to Memory Frequency Multiplier (L) */ +static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, }; + +/* Memory Frequency to Run Mode Frequency Multiplier (M) */ +static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 }; + +/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */ +/* Note: we store the value N * 2 here. */ +static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 }; + +static const char * const get_freq_khz[] = { + "core", "run", "cpll", "memory" +}; + +static u32 mdrefr_dri(unsigned int freq_khz) +{ + u32 interval = freq_khz * SDRAM_TREF / pxa2xx_smemc_get_sdram_rows(); + + return interval / 32; +} + +/* + * Get the clock frequency as reflected by CCCR and the turbo flag. + * We assume these values have been applied via a fcs. + * If info is not 0 we also display the current settings. + */ +unsigned int pxa25x_get_clk_frequency_khz(int info) +{ + struct clk *clk; + unsigned long clks[5]; + int i; + + for (i = 0; i < ARRAY_SIZE(get_freq_khz); i++) { + clk = clk_get(NULL, get_freq_khz[i]); + if (IS_ERR(clk)) { + clks[i] = 0; + } else { + clks[i] = clk_get_rate(clk); + clk_put(clk); + } + } + + if (info) { + pr_info("Run Mode clock: %ld.%02ldMHz\n", + clks[1] / 1000000, (clks[1] % 1000000) / 10000); + pr_info("Turbo Mode clock: %ld.%02ldMHz\n", + clks[2] / 1000000, (clks[2] % 1000000) / 10000); + pr_info("Memory clock: %ld.%02ldMHz\n", + clks[3] / 1000000, (clks[3] % 1000000) / 10000); + } + + return (unsigned int)clks[0] / KHz; +} + +static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long cccr = readl(clk_regs + CCCR); + unsigned int m = M_clk_mult[(cccr >> 5) & 0x03]; + + return parent_rate / m; +} +PARENTS(clk_pxa25x_memory) = { "run" }; +RATE_RO_OPS(clk_pxa25x_memory, "memory"); + +PARENTS(pxa25x_pbus95) = { "ppll_95_85mhz", "ppll_95_85mhz" }; +PARENTS(pxa25x_pbus147) = { "ppll_147_46mhz", "ppll_147_46mhz" }; +PARENTS(pxa25x_osc3) = { "osc_3_6864mhz", "osc_3_6864mhz" }; + +#define PXA25X_CKEN(dev_id, con_id, parents, mult, div, \ + bit, is_lp, flags) \ + PXA_CKEN(dev_id, con_id, bit, parents, mult, div, mult, div, \ + is_lp, CKEN, CKEN_ ## bit, flags) +#define PXA25X_PBUS95_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \ + PXA25X_CKEN(dev_id, con_id, pxa25x_pbus95_parents, mult_hp, \ + div_hp, bit, NULL, 0) +#define PXA25X_PBUS147_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)\ + PXA25X_CKEN(dev_id, con_id, pxa25x_pbus147_parents, mult_hp, \ + div_hp, bit, NULL, 0) +#define PXA25X_OSC3_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \ + PXA25X_CKEN(dev_id, con_id, pxa25x_osc3_parents, mult_hp, \ + div_hp, bit, NULL, 0) + +#define PXA25X_CKEN_1RATE(dev_id, con_id, bit, parents, delay) \ + PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ + CKEN, CKEN_ ## bit, 0) +#define PXA25X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay) \ + PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ + CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED) + +static struct desc_clk_cken pxa25x_clocks[] __initdata = { + PXA25X_PBUS95_CKEN("pxa2xx-mci.0", NULL, MMC, 1, 5, 0), + PXA25X_PBUS95_CKEN("pxa2xx-i2c.0", NULL, I2C, 1, 3, 0), + PXA25X_PBUS95_CKEN("pxa2xx-ir", "FICPCLK", FICP, 1, 2, 0), + PXA25X_PBUS95_CKEN("pxa25x-udc", NULL, USB, 1, 2, 5), + PXA25X_PBUS147_CKEN("pxa2xx-uart.0", NULL, FFUART, 1, 10, 1), + PXA25X_PBUS147_CKEN("pxa2xx-uart.1", NULL, BTUART, 1, 10, 1), + PXA25X_PBUS147_CKEN("pxa2xx-uart.2", NULL, STUART, 1, 10, 1), + PXA25X_PBUS147_CKEN("pxa2xx-uart.3", NULL, HWUART, 1, 10, 1), + PXA25X_PBUS147_CKEN("pxa2xx-i2s", NULL, I2S, 1, 10, 0), + PXA25X_PBUS147_CKEN(NULL, "AC97CLK", AC97, 1, 12, 0), + PXA25X_OSC3_CKEN("pxa25x-ssp.0", NULL, SSP, 1, 1, 0), + PXA25X_OSC3_CKEN("pxa25x-nssp.1", NULL, NSSP, 1, 1, 0), + PXA25X_OSC3_CKEN("pxa25x-nssp.2", NULL, ASSP, 1, 1, 0), + PXA25X_OSC3_CKEN("pxa25x-pwm.0", NULL, PWM0, 1, 1, 0), + PXA25X_OSC3_CKEN("pxa25x-pwm.1", NULL, PWM1, 1, 1, 0), + + PXA25X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, clk_pxa25x_memory_parents, 0), + PXA25X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC, + clk_pxa25x_memory_parents, 0), +}; + +/* + * In this table, PXA25x_CCCR(N2, M, L) has the following meaning, where : + * - freq_cpll = n * m * L * 3.6864 MHz + * - n = N2 / 2 + * - m = 2^(M - 1), where 1 <= M <= 3 + * - l = L_clk_mult[L], ie. { 0, 27, 32, 36, 40, 45, 0, }[L] + */ +static struct pxa2xx_freq pxa25x_freqs[] = { + /* CPU MEMBUS CCCR DIV2 CCLKCFG */ + { 99532800, 99500, PXA25x_CCCR(2, 1, 1), 1, PXA25x_CLKCFG(1)}, + {199065600, 99500, PXA25x_CCCR(4, 1, 1), 0, PXA25x_CLKCFG(1)}, + {298598400, 99500, PXA25x_CCCR(3, 2, 1), 0, PXA25x_CLKCFG(1)}, + {398131200, 99500, PXA25x_CCCR(4, 2, 1), 0, PXA25x_CLKCFG(1)}, +}; + +static u8 clk_pxa25x_core_get_parent(struct clk_hw *hw) +{ + unsigned long clkcfg; + unsigned int t; + + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + if (t) + return PXA_CORE_TURBO; + return PXA_CORE_RUN; +} + +static int clk_pxa25x_core_set_parent(struct clk_hw *hw, u8 index) +{ + if (index > PXA_CORE_TURBO) + return -EINVAL; + + pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO); + + return 0; +} + +static int clk_pxa25x_core_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + return __clk_mux_determine_rate(hw, req); +} + +PARENTS(clk_pxa25x_core) = { "run", "cpll" }; +MUX_OPS(clk_pxa25x_core, "core", CLK_SET_RATE_PARENT); + +static unsigned long clk_pxa25x_run_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long cccr = readl(clk_regs + CCCR); + unsigned int n2 = N2_clk_mult[(cccr >> 7) & 0x07]; + + return (parent_rate / n2) * 2; +} +PARENTS(clk_pxa25x_run) = { "cpll" }; +RATE_RO_OPS(clk_pxa25x_run, "run"); + +static unsigned long clk_pxa25x_cpll_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long clkcfg, cccr = readl(clk_regs + CCCR); + unsigned int l, m, n2, t; + + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + l = L_clk_mult[(cccr >> 0) & 0x1f]; + m = M_clk_mult[(cccr >> 5) & 0x03]; + n2 = N2_clk_mult[(cccr >> 7) & 0x07]; + + return m * l * n2 * parent_rate / 2; +} + +static int clk_pxa25x_cpll_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + return pxa2xx_determine_rate(req, pxa25x_freqs, + ARRAY_SIZE(pxa25x_freqs)); +} + +static int clk_pxa25x_cpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + int i; + + pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate); + for (i = 0; i < ARRAY_SIZE(pxa25x_freqs); i++) + if (pxa25x_freqs[i].cpll == rate) + break; + + if (i >= ARRAY_SIZE(pxa25x_freqs)) + return -EINVAL; + + pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, clk_regs + CCCR); + + return 0; +} +PARENTS(clk_pxa25x_cpll) = { "osc_3_6864mhz" }; +RATE_OPS(clk_pxa25x_cpll, "cpll"); + +static void __init pxa25x_register_core(void) +{ + clkdev_pxa_register(CLK_NONE, "cpll", NULL, + clk_register_clk_pxa25x_cpll()); + clkdev_pxa_register(CLK_NONE, "run", NULL, + clk_register_clk_pxa25x_run()); + clkdev_pxa_register(CLK_CORE, "core", NULL, + clk_register_clk_pxa25x_core()); +} + +static void __init pxa25x_register_plls(void) +{ + clk_register_fixed_rate(NULL, "osc_3_6864mhz", NULL, + CLK_GET_RATE_NOCACHE, 3686400); + clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL, + clk_register_fixed_rate(NULL, "osc_32_768khz", NULL, + CLK_GET_RATE_NOCACHE, + 32768)); + clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0); + clk_register_fixed_factor(NULL, "ppll_95_85mhz", "osc_3_6864mhz", + 0, 26, 1); + clk_register_fixed_factor(NULL, "ppll_147_46mhz", "osc_3_6864mhz", + 0, 40, 1); +} + +static void __init pxa25x_base_clocks_init(void) +{ + pxa25x_register_plls(); + pxa25x_register_core(); + clkdev_pxa_register(CLK_NONE, "system_bus", NULL, + clk_register_clk_pxa25x_memory()); +} + +#define DUMMY_CLK(_con_id, _dev_id, _parent) \ + { .con_id = _con_id, .dev_id = _dev_id, .parent = _parent } +struct dummy_clk { + const char *con_id; + const char *dev_id; + const char *parent; +}; +static struct dummy_clk dummy_clks[] __initdata = { + DUMMY_CLK(NULL, "pxa25x-gpio", "osc_32_768khz"), + DUMMY_CLK(NULL, "pxa26x-gpio", "osc_32_768khz"), + DUMMY_CLK("GPIO11_CLK", NULL, "osc_3_6864mhz"), + DUMMY_CLK("GPIO12_CLK", NULL, "osc_32_768khz"), + DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"), + DUMMY_CLK("OSTIMER0", NULL, "osc_3_6864mhz"), + DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"), +}; + +static void __init pxa25x_dummy_clocks_init(void) +{ + struct clk *clk; + struct dummy_clk *d; + const char *name; + int i; + + /* + * All pinctrl logic has been wiped out of the clock driver, especially + * for gpio11 and gpio12 outputs. Machine code should ensure proper pin + * control (ie. pxa2xx_mfp_config() invocation). + */ + for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) { + d = &dummy_clks[i]; + name = d->dev_id ? d->dev_id : d->con_id; + clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1); + clk_register_clkdev(clk, d->con_id, d->dev_id); + } +} + +int __init pxa25x_clocks_init(void __iomem *regs) +{ + clk_regs = regs; + pxa25x_base_clocks_init(); + pxa25x_dummy_clocks_init(); + return clk_pxa_cken_init(pxa25x_clocks, ARRAY_SIZE(pxa25x_clocks), clk_regs); +} + +static void __init pxa25x_dt_clocks_init(struct device_node *np) +{ + pxa25x_clocks_init(ioremap(0x41300000ul, 0x10)); + clk_pxa_dt_common_init(np); +} +CLK_OF_DECLARE(pxa25x_clks, "marvell,pxa250-core-clocks", + pxa25x_dt_clocks_init); diff --git a/drivers/clk/pxa/clk-pxa27x.c b/drivers/clk/pxa/clk-pxa27x.c new file mode 100644 index 0000000000..2bea89874e --- /dev/null +++ b/drivers/clk/pxa/clk-pxa27x.c @@ -0,0 +1,484 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Marvell PXA27x family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Heavily inspired from former arch/arm/mach-pxa/clock.c. + */ +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/soc/pxa/smemc.h> +#include <linux/clk/pxa.h> + +#include <dt-bindings/clock/pxa-clock.h> +#include "clk-pxa.h" +#include "clk-pxa2xx.h" + +#define KHz 1000 +#define MHz (1000 * 1000) + +enum { + PXA_CORE_13Mhz = 0, + PXA_CORE_RUN, + PXA_CORE_TURBO, +}; + +enum { + PXA_BUS_13Mhz = 0, + PXA_BUS_RUN, +}; + +enum { + PXA_LCD_13Mhz = 0, + PXA_LCD_RUN, +}; + +enum { + PXA_MEM_13Mhz = 0, + PXA_MEM_SYSTEM_BUS, + PXA_MEM_RUN, +}; + +#define PXA27x_CLKCFG(B, HT, T) \ + (CLKCFG_FCS | \ + ((B) ? CLKCFG_FASTBUS : 0) | \ + ((HT) ? CLKCFG_HALFTURBO : 0) | \ + ((T) ? CLKCFG_TURBO : 0)) +#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L) + +/* Define the refresh period in mSec for the SDRAM and the number of rows */ +#define SDRAM_TREF 64 /* standard 64ms SDRAM */ + +static void __iomem *clk_regs; + +static const char * const get_freq_khz[] = { + "core", "run", "cpll", "memory", + "system_bus" +}; + +static u32 mdrefr_dri(unsigned int freq_khz) +{ + u32 interval = freq_khz * SDRAM_TREF / pxa2xx_smemc_get_sdram_rows(); + + return (interval - 31) / 32; +} + +/* + * Get the clock frequency as reflected by CCSR and the turbo flag. + * We assume these values have been applied via a fcs. + * If info is not 0 we also display the current settings. + */ +unsigned int pxa27x_get_clk_frequency_khz(int info) +{ + struct clk *clk; + unsigned long clks[5]; + int i; + + for (i = 0; i < 5; i++) { + clk = clk_get(NULL, get_freq_khz[i]); + if (IS_ERR(clk)) { + clks[i] = 0; + } else { + clks[i] = clk_get_rate(clk); + clk_put(clk); + } + } + if (info) { + pr_info("Run Mode clock: %ld.%02ldMHz\n", + clks[1] / 1000000, (clks[1] % 1000000) / 10000); + pr_info("Turbo Mode clock: %ld.%02ldMHz\n", + clks[2] / 1000000, (clks[2] % 1000000) / 10000); + pr_info("Memory clock: %ld.%02ldMHz\n", + clks[3] / 1000000, (clks[3] % 1000000) / 10000); + pr_info("System bus clock: %ld.%02ldMHz\n", + clks[4] / 1000000, (clks[4] % 1000000) / 10000); + } + return (unsigned int)clks[0] / KHz; +} + +static bool pxa27x_is_ppll_disabled(void) +{ + unsigned long ccsr = readl(clk_regs + CCSR); + + return ccsr & (1 << CCCR_PPDIS_BIT); +} + +#define PXA27X_CKEN(dev_id, con_id, parents, mult_hp, div_hp, \ + bit, is_lp, flags) \ + PXA_CKEN(dev_id, con_id, bit, parents, 1, 1, mult_hp, div_hp, \ + is_lp, CKEN, CKEN_ ## bit, flags) +#define PXA27X_PBUS_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \ + PXA27X_CKEN(dev_id, con_id, pxa27x_pbus_parents, mult_hp, \ + div_hp, bit, pxa27x_is_ppll_disabled, 0) + +PARENTS(pxa27x_pbus) = { "osc_13mhz", "ppll_312mhz" }; +PARENTS(pxa27x_sbus) = { "system_bus", "system_bus" }; +PARENTS(pxa27x_32Mhz_bus) = { "osc_32_768khz", "osc_32_768khz" }; +PARENTS(pxa27x_lcd_bus) = { "lcd_base", "lcd_base" }; +PARENTS(pxa27x_membus) = { "lcd_base", "lcd_base" }; + +#define PXA27X_CKEN_1RATE(dev_id, con_id, bit, parents, delay) \ + PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ + CKEN, CKEN_ ## bit, 0) +#define PXA27X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay) \ + PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ + CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED) + +static struct desc_clk_cken pxa27x_clocks[] __initdata = { + PXA27X_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 2, 42, 1), + PXA27X_PBUS_CKEN("pxa2xx-uart.1", NULL, BTUART, 2, 42, 1), + PXA27X_PBUS_CKEN("pxa2xx-uart.2", NULL, STUART, 2, 42, 1), + PXA27X_PBUS_CKEN("pxa2xx-i2s", NULL, I2S, 2, 51, 0), + PXA27X_PBUS_CKEN("pxa2xx-i2c.0", NULL, I2C, 2, 19, 0), + PXA27X_PBUS_CKEN("pxa27x-udc", NULL, USB, 2, 13, 5), + PXA27X_PBUS_CKEN("pxa2xx-mci.0", NULL, MMC, 2, 32, 0), + PXA27X_PBUS_CKEN("pxa2xx-ir", "FICPCLK", FICP, 2, 13, 0), + PXA27X_PBUS_CKEN("pxa27x-ohci", NULL, USBHOST, 2, 13, 0), + PXA27X_PBUS_CKEN("pxa2xx-i2c.1", NULL, PWRI2C, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-ssp.0", NULL, SSP1, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-ssp.1", NULL, SSP2, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-ssp.2", NULL, SSP3, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-pwm.0", NULL, PWM0, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-pwm.1", NULL, PWM1, 1, 24, 0), + PXA27X_PBUS_CKEN(NULL, "MSLCLK", MSL, 2, 13, 0), + PXA27X_PBUS_CKEN(NULL, "USIMCLK", USIM, 2, 13, 0), + PXA27X_PBUS_CKEN(NULL, "MSTKCLK", MEMSTK, 2, 32, 0), + PXA27X_PBUS_CKEN(NULL, "AC97CLK", AC97, 1, 1, 0), + PXA27X_PBUS_CKEN(NULL, "AC97CONFCLK", AC97CONF, 1, 1, 0), + PXA27X_PBUS_CKEN(NULL, "OSTIMER0", OSTIMER, 1, 96, 0), + + PXA27X_CKEN_1RATE("pxa27x-keypad", NULL, KEYPAD, + pxa27x_32Mhz_bus_parents, 0), + PXA27X_CKEN_1RATE(NULL, "IMCLK", IM, pxa27x_sbus_parents, 0), + PXA27X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, pxa27x_lcd_bus_parents, 0), + PXA27X_CKEN_1RATE("pxa27x-camera.0", NULL, CAMERA, + pxa27x_lcd_bus_parents, 0), + PXA27X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC, + pxa27x_membus_parents, 0), + +}; + +/* + * PXA270 definitions + * + * For the PXA27x: + * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG. + * + * A = 0 => memory controller clock from table 3-7, + * A = 1 => memory controller clock = system bus clock + * Run mode frequency = 13 MHz * L + * Turbo mode frequency = 13 MHz * L * N + * System bus frequency = 13 MHz * L / (B + 1) + * + * In CCCR: + * A = 1 + * L = 16 oscillator to run mode ratio + * 2N = 6 2 * (turbo mode to run mode ratio) + * + * In CCLKCFG: + * B = 1 Fast bus mode + * HT = 0 Half-Turbo mode + * T = 1 Turbo mode + * + * For now, just support some of the combinations in table 3-7 of + * PXA27x Processor Family Developer's Manual to simplify frequency + * change sequences. + */ +static struct pxa2xx_freq pxa27x_freqs[] = { + {104000000, 104000, PXA27x_CCCR(1, 8, 2), 0, PXA27x_CLKCFG(1, 0, 1) }, + {156000000, 104000, PXA27x_CCCR(1, 8, 3), 0, PXA27x_CLKCFG(1, 0, 1) }, + {208000000, 208000, PXA27x_CCCR(0, 16, 2), 1, PXA27x_CLKCFG(0, 0, 1) }, + {312000000, 208000, PXA27x_CCCR(1, 16, 3), 1, PXA27x_CLKCFG(1, 0, 1) }, + {416000000, 208000, PXA27x_CCCR(1, 16, 4), 1, PXA27x_CLKCFG(1, 0, 1) }, + {520000000, 208000, PXA27x_CCCR(1, 16, 5), 1, PXA27x_CLKCFG(1, 0, 1) }, + {624000000, 208000, PXA27x_CCCR(1, 16, 6), 1, PXA27x_CLKCFG(1, 0, 1) }, +}; + +static unsigned long clk_pxa27x_cpll_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long clkcfg; + unsigned int t, ht; + unsigned int l, L, n2, N; + unsigned long ccsr = readl(clk_regs + CCSR); + + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + ht = clkcfg & (1 << 2); + + l = ccsr & CCSR_L_MASK; + n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT; + L = l * parent_rate; + N = (L * n2) / 2; + + return N; +} + +static int clk_pxa27x_cpll_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + return pxa2xx_determine_rate(req, pxa27x_freqs, + ARRAY_SIZE(pxa27x_freqs)); +} + +static int clk_pxa27x_cpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + int i; + + pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate); + for (i = 0; i < ARRAY_SIZE(pxa27x_freqs); i++) + if (pxa27x_freqs[i].cpll == rate) + break; + + if (i >= ARRAY_SIZE(pxa27x_freqs)) + return -EINVAL; + + pxa2xx_cpll_change(&pxa27x_freqs[i], mdrefr_dri, clk_regs + CCCR); + return 0; +} + +PARENTS(clk_pxa27x_cpll) = { "osc_13mhz" }; +RATE_OPS(clk_pxa27x_cpll, "cpll"); + +static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned int l, osc_forced; + unsigned long ccsr = readl(clk_regs + CCSR); + unsigned long cccr = readl(clk_regs + CCCR); + + l = ccsr & CCSR_L_MASK; + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) { + if (cccr & (1 << CCCR_LCD_26_BIT)) + return parent_rate * 2; + else + return parent_rate; + } + + if (l <= 7) + return parent_rate; + if (l <= 16) + return parent_rate / 2; + return parent_rate / 4; +} + +static u8 clk_pxa27x_lcd_base_get_parent(struct clk_hw *hw) +{ + unsigned int osc_forced; + unsigned long ccsr = readl(clk_regs + CCSR); + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) + return PXA_LCD_13Mhz; + else + return PXA_LCD_RUN; +} + +PARENTS(clk_pxa27x_lcd_base) = { "osc_13mhz", "run" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_lcd_base, "lcd_base"); + +static void __init pxa27x_register_plls(void) +{ + clk_register_fixed_rate(NULL, "osc_13mhz", NULL, + CLK_GET_RATE_NOCACHE, + 13 * MHz); + clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL, + clk_register_fixed_rate(NULL, "osc_32_768khz", NULL, + CLK_GET_RATE_NOCACHE, + 32768 * KHz)); + clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0); + clk_register_fixed_factor(NULL, "ppll_312mhz", "osc_13mhz", 0, 24, 1); +} + +static u8 clk_pxa27x_core_get_parent(struct clk_hw *hw) +{ + unsigned long clkcfg; + unsigned int t, ht, osc_forced; + unsigned long ccsr = readl(clk_regs + CCSR); + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) + return PXA_CORE_13Mhz; + + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + ht = clkcfg & (1 << 2); + + if (ht || t) + return PXA_CORE_TURBO; + return PXA_CORE_RUN; +} + +static int clk_pxa27x_core_set_parent(struct clk_hw *hw, u8 index) +{ + if (index > PXA_CORE_TURBO) + return -EINVAL; + + pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO); + + return 0; +} + +static int clk_pxa27x_core_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + return __clk_mux_determine_rate(hw, req); +} + +PARENTS(clk_pxa27x_core) = { "osc_13mhz", "run", "cpll" }; +MUX_OPS(clk_pxa27x_core, "core", CLK_SET_RATE_PARENT); + +static unsigned long clk_pxa27x_run_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long ccsr = readl(clk_regs + CCSR); + unsigned int n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT; + + return (parent_rate / n2) * 2; +} +PARENTS(clk_pxa27x_run) = { "cpll" }; +RATE_RO_OPS(clk_pxa27x_run, "run"); + +static void __init pxa27x_register_core(void) +{ + clkdev_pxa_register(CLK_NONE, "cpll", NULL, + clk_register_clk_pxa27x_cpll()); + clkdev_pxa_register(CLK_NONE, "run", NULL, + clk_register_clk_pxa27x_run()); + clkdev_pxa_register(CLK_CORE, "core", NULL, + clk_register_clk_pxa27x_core()); +} + +static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long clkcfg; + unsigned int b, osc_forced; + unsigned long ccsr = readl(clk_regs + CCSR); + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + b = clkcfg & (1 << 3); + + if (osc_forced) + return parent_rate; + if (b) + return parent_rate; + else + return parent_rate / 2; +} + +static u8 clk_pxa27x_system_bus_get_parent(struct clk_hw *hw) +{ + unsigned int osc_forced; + unsigned long ccsr = readl(clk_regs + CCSR); + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) + return PXA_BUS_13Mhz; + else + return PXA_BUS_RUN; +} + +PARENTS(clk_pxa27x_system_bus) = { "osc_13mhz", "run" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_system_bus, "system_bus"); + +static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned int a, l, osc_forced; + unsigned long cccr = readl(clk_regs + CCCR); + unsigned long ccsr = readl(clk_regs + CCSR); + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + a = cccr & (1 << CCCR_A_BIT); + l = ccsr & CCSR_L_MASK; + + if (osc_forced || a) + return parent_rate; + if (l <= 10) + return parent_rate; + if (l <= 20) + return parent_rate / 2; + return parent_rate / 4; +} + +static u8 clk_pxa27x_memory_get_parent(struct clk_hw *hw) +{ + unsigned int osc_forced, a; + unsigned long cccr = readl(clk_regs + CCCR); + unsigned long ccsr = readl(clk_regs + CCSR); + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + a = cccr & (1 << CCCR_A_BIT); + if (osc_forced) + return PXA_MEM_13Mhz; + if (a) + return PXA_MEM_SYSTEM_BUS; + else + return PXA_MEM_RUN; +} + +PARENTS(clk_pxa27x_memory) = { "osc_13mhz", "system_bus", "run" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_memory, "memory"); + +#define DUMMY_CLK(_con_id, _dev_id, _parent) \ + { .con_id = _con_id, .dev_id = _dev_id, .parent = _parent } +struct dummy_clk { + const char *con_id; + const char *dev_id; + const char *parent; +}; +static struct dummy_clk dummy_clks[] __initdata = { + DUMMY_CLK(NULL, "pxa27x-gpio", "osc_32_768khz"), + DUMMY_CLK(NULL, "pxa-rtc", "osc_32_768khz"), + DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"), + DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"), +}; + +static void __init pxa27x_dummy_clocks_init(void) +{ + struct clk *clk; + struct dummy_clk *d; + const char *name; + int i; + + for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) { + d = &dummy_clks[i]; + name = d->dev_id ? d->dev_id : d->con_id; + clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1); + clk_register_clkdev(clk, d->con_id, d->dev_id); + } +} + +static void __init pxa27x_base_clocks_init(void) +{ + pxa27x_register_plls(); + pxa27x_register_core(); + clkdev_pxa_register(CLK_NONE, "system_bus", NULL, + clk_register_clk_pxa27x_system_bus()); + clkdev_pxa_register(CLK_NONE, "memory", NULL, + clk_register_clk_pxa27x_memory()); + clk_register_clk_pxa27x_lcd_base(); +} + +int __init pxa27x_clocks_init(void __iomem *regs) +{ + clk_regs = regs; + pxa27x_base_clocks_init(); + pxa27x_dummy_clocks_init(); + return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks), regs); +} + +static void __init pxa27x_dt_clocks_init(struct device_node *np) +{ + pxa27x_clocks_init(ioremap(0x41300000ul, 0x10)); + clk_pxa_dt_common_init(np); +} +CLK_OF_DECLARE(pxa_clks, "marvell,pxa270-clocks", pxa27x_dt_clocks_init); diff --git a/drivers/clk/pxa/clk-pxa2xx.h b/drivers/clk/pxa/clk-pxa2xx.h new file mode 100644 index 0000000000..94b03d0e32 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa2xx.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __CLK_PXA2XX_H +#define __CLK_PXA2XX_H + +#define CCCR (0x0000) /* Core Clock Configuration Register */ +#define CCSR (0x000C) /* Core Clock Status Register */ +#define CKEN (0x0004) /* Clock Enable Register */ +#define OSCC (0x0008) /* Oscillator Configuration Register */ + +#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ + +#define CCCR_CPDIS_BIT (31) +#define CCCR_PPDIS_BIT (30) +#define CCCR_LCD_26_BIT (27) +#define CCCR_A_BIT (25) + +#define CCSR_N2_MASK CCCR_N_MASK +#define CCSR_M_MASK CCCR_M_MASK +#define CCSR_L_MASK CCCR_L_MASK +#define CCSR_N2_SHIFT 7 + +#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ +#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ +#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ +#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ +#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ +#define CKEN_IM (20) /* Internal Memory Clock Enable */ +#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ +#define CKEN_USIM (18) /* USIM Unit Clock Enable */ +#define CKEN_MSL (17) /* MSL Unit Clock Enable */ +#define CKEN_LCD (16) /* LCD Unit Clock Enable */ +#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ +#define CKEN_I2C (14) /* I2C Unit Clock Enable */ +#define CKEN_FICP (13) /* FICP Unit Clock Enable */ +#define CKEN_MMC (12) /* MMC Unit Clock Enable */ +#define CKEN_USB (11) /* USB Unit Clock Enable */ +#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ +#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ +#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ +#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ +#define CKEN_I2S (8) /* I2S Unit Clock Enable */ +#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ +#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ +#define CKEN_STUART (5) /* STUART Unit Clock Enable */ +#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ +#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ +#define CKEN_SSP (3) /* SSP Unit Clock Enable */ +#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ +#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ +#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ +#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ + +#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ +#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ + +#endif diff --git a/drivers/clk/pxa/clk-pxa3xx.c b/drivers/clk/pxa/clk-pxa3xx.c new file mode 100644 index 0000000000..621e298f10 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa3xx.c @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Marvell PXA3xxx family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Heavily inspired from former arch/arm/mach-pxa/pxa3xx.c + * + * For non-devicetree platforms. Once pxa is fully converted to devicetree, this + * should go away. + */ +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/soc/pxa/cpu.h> +#include <linux/soc/pxa/smemc.h> +#include <linux/clk/pxa.h> + +#include <dt-bindings/clock/pxa-clock.h> +#include "clk-pxa.h" + +#define KHz 1000 +#define MHz (1000 * 1000) + +#define ACCR (0x0000) /* Application Subsystem Clock Configuration Register */ +#define ACSR (0x0004) /* Application Subsystem Clock Status Register */ +#define AICSR (0x0008) /* Application Subsystem Interrupt Control/Status Register */ +#define CKENA (0x000C) /* A Clock Enable Register */ +#define CKENB (0x0010) /* B Clock Enable Register */ +#define CKENC (0x0024) /* C Clock Enable Register */ +#define AC97_DIV (0x0014) /* AC97 clock divisor value register */ + +#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */ +#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */ +#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */ +#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */ +#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */ + +#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */ +#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */ +#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */ +#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */ +#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */ +#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */ +#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */ + +#define ACCR_SMCFS(x) (((x) & 0x7) << 23) +#define ACCR_SFLFS(x) (((x) & 0x3) << 18) +#define ACCR_XSPCLK(x) (((x) & 0x3) << 16) +#define ACCR_HSS(x) (((x) & 0x3) << 14) +#define ACCR_DMCFS(x) (((x) & 0x3) << 12) +#define ACCR_XN(x) (((x) & 0x7) << 8) +#define ACCR_XL(x) ((x) & 0x1f) + +/* + * Clock Enable Bit + */ +#define CKEN_LCD 1 /* < LCD Clock Enable */ +#define CKEN_USBH 2 /* < USB host clock enable */ +#define CKEN_CAMERA 3 /* < Camera interface clock enable */ +#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ +#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ +#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ +#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ +#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ +#define CKEN_BOOT 11 /* < Boot rom clock enable */ +#define CKEN_MMC1 12 /* < MMC1 Clock enable */ +#define CKEN_MMC2 13 /* < MMC2 clock enable */ +#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ +#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ +#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ +#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ +#define CKEN_TPM 19 /* < TPM clock enable */ +#define CKEN_UDC 20 /* < UDC clock enable */ +#define CKEN_BTUART 21 /* < BTUART clock enable */ +#define CKEN_FFUART 22 /* < FFUART clock enable */ +#define CKEN_STUART 23 /* < STUART clock enable */ +#define CKEN_AC97 24 /* < AC97 clock enable */ +#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ +#define CKEN_SSP1 26 /* < SSP1 clock enable */ +#define CKEN_SSP2 27 /* < SSP2 clock enable */ +#define CKEN_SSP3 28 /* < SSP3 clock enable */ +#define CKEN_SSP4 29 /* < SSP4 clock enable */ +#define CKEN_MSL0 30 /* < MSL0 clock enable */ +#define CKEN_PWM0 32 /* < PWM[0] clock enable */ +#define CKEN_PWM1 33 /* < PWM[1] clock enable */ +#define CKEN_I2C 36 /* < I2C clock enable */ +#define CKEN_INTC 38 /* < Interrupt controller clock enable */ +#define CKEN_GPIO 39 /* < GPIO clock enable */ +#define CKEN_1WIRE 40 /* < 1-wire clock enable */ +#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ +#define CKEN_MINI_IM 48 /* < Mini-IM */ +#define CKEN_MINI_LCD 49 /* < Mini LCD */ + +#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ +#define CKEN_MVED 43 /* < MVED clock enable */ + +/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ +#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */ +#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */ + + +enum { + PXA_CORE_60Mhz = 0, + PXA_CORE_RUN, + PXA_CORE_TURBO, +}; + +enum { + PXA_BUS_60Mhz = 0, + PXA_BUS_HSS, +}; + +/* crystal frequency to HSIO bus frequency multiplier (HSS) */ +static unsigned char hss_mult[4] = { 8, 12, 16, 24 }; + +/* crystal frequency to static memory controller multiplier (SMCFS) */ +static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, }; +static const char * const get_freq_khz[] = { + "core", "ring_osc_60mhz", "run", "cpll", "system_bus" +}; + +static void __iomem *clk_regs; + +/* + * Get the clock frequency as reflected by ACSR and the turbo flag. + * We assume these values have been applied via a fcs. + * If info is not 0 we also display the current settings. + */ +unsigned int pxa3xx_get_clk_frequency_khz(int info) +{ + struct clk *clk; + unsigned long clks[5]; + int i; + + for (i = 0; i < 5; i++) { + clk = clk_get(NULL, get_freq_khz[i]); + if (IS_ERR(clk)) { + clks[i] = 0; + } else { + clks[i] = clk_get_rate(clk); + clk_put(clk); + } + } + if (info) { + pr_info("RO Mode clock: %ld.%02ldMHz\n", + clks[1] / 1000000, (clks[0] % 1000000) / 10000); + pr_info("Run Mode clock: %ld.%02ldMHz\n", + clks[2] / 1000000, (clks[1] % 1000000) / 10000); + pr_info("Turbo Mode clock: %ld.%02ldMHz\n", + clks[3] / 1000000, (clks[2] % 1000000) / 10000); + pr_info("System bus clock: %ld.%02ldMHz\n", + clks[4] / 1000000, (clks[4] % 1000000) / 10000); + } + return (unsigned int)clks[0] / KHz; +} + +void pxa3xx_clk_update_accr(u32 disable, u32 enable, u32 xclkcfg, u32 mask) +{ + u32 accr = readl(clk_regs + ACCR); + + accr &= ~disable; + accr |= enable; + + writel(accr, clk_regs + ACCR); + if (xclkcfg) + __asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg)); + + while ((readl(clk_regs + ACSR) & mask) != (accr & mask)) + cpu_relax(); +} + +static unsigned long clk_pxa3xx_ac97_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long ac97_div, rate; + + ac97_div = readl(clk_regs + AC97_DIV); + + /* This may loose precision for some rates but won't for the + * standard 24.576MHz. + */ + rate = parent_rate / 2; + rate /= ((ac97_div >> 12) & 0x7fff); + rate *= (ac97_div & 0xfff); + + return rate; +} +PARENTS(clk_pxa3xx_ac97) = { "spll_624mhz" }; +RATE_RO_OPS(clk_pxa3xx_ac97, "ac97"); + +static unsigned long clk_pxa3xx_smemc_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long acsr = readl(clk_regs + ACSR); + + return (parent_rate / 48) * smcfs_mult[(acsr >> 23) & 0x7] / + pxa3xx_smemc_get_memclkdiv(); + +} +PARENTS(clk_pxa3xx_smemc) = { "spll_624mhz" }; +RATE_RO_OPS(clk_pxa3xx_smemc, "smemc"); + +static bool pxa3xx_is_ring_osc_forced(void) +{ + unsigned long acsr = readl(clk_regs + ACSR); + + return acsr & ACCR_D0CS; +} + +PARENTS(pxa3xx_pbus) = { "ring_osc_60mhz", "spll_624mhz" }; +PARENTS(pxa3xx_32Khz_bus) = { "osc_32_768khz", "osc_32_768khz" }; +PARENTS(pxa3xx_13MHz_bus) = { "osc_13mhz", "osc_13mhz" }; +PARENTS(pxa3xx_ac97_bus) = { "ring_osc_60mhz", "ac97" }; +PARENTS(pxa3xx_sbus) = { "ring_osc_60mhz", "system_bus" }; +PARENTS(pxa3xx_smemcbus) = { "ring_osc_60mhz", "smemc" }; + +#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? CKENB : CKENA) +#define PXA3XX_CKEN(dev_id, con_id, parents, mult_lp, div_lp, mult_hp, \ + div_hp, bit, is_lp, flags) \ + PXA_CKEN(dev_id, con_id, bit, parents, mult_lp, div_lp, \ + mult_hp, div_hp, is_lp, CKEN_AB(bit), \ + (CKEN_ ## bit % 32), flags) +#define PXA3XX_PBUS_CKEN(dev_id, con_id, bit, mult_lp, div_lp, \ + mult_hp, div_hp, delay) \ + PXA3XX_CKEN(dev_id, con_id, pxa3xx_pbus_parents, mult_lp, \ + div_lp, mult_hp, div_hp, bit, pxa3xx_is_ring_osc_forced, 0) +#define PXA3XX_CKEN_1RATE(dev_id, con_id, bit, parents) \ + PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ + CKEN_AB(bit), (CKEN_ ## bit % 32), 0) + +static struct desc_clk_cken pxa3xx_clocks[] __initdata = { + PXA3XX_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 1, 4, 1, 42, 1), + PXA3XX_PBUS_CKEN("pxa2xx-uart.1", NULL, BTUART, 1, 4, 1, 42, 1), + PXA3XX_PBUS_CKEN("pxa2xx-uart.2", NULL, STUART, 1, 4, 1, 42, 1), + PXA3XX_PBUS_CKEN("pxa2xx-i2c.0", NULL, I2C, 2, 5, 1, 19, 0), + PXA3XX_PBUS_CKEN("pxa27x-udc", NULL, UDC, 1, 4, 1, 13, 5), + PXA3XX_PBUS_CKEN("pxa27x-ohci", NULL, USBH, 1, 4, 1, 13, 0), + PXA3XX_PBUS_CKEN("pxa3xx-u2d", NULL, USB2, 1, 4, 1, 13, 0), + PXA3XX_PBUS_CKEN("pxa27x-pwm.0", NULL, PWM0, 1, 6, 1, 48, 0), + PXA3XX_PBUS_CKEN("pxa27x-pwm.1", NULL, PWM1, 1, 6, 1, 48, 0), + PXA3XX_PBUS_CKEN("pxa2xx-mci.0", NULL, MMC1, 1, 4, 1, 24, 0), + PXA3XX_PBUS_CKEN("pxa2xx-mci.1", NULL, MMC2, 1, 4, 1, 24, 0), + PXA3XX_PBUS_CKEN("pxa2xx-mci.2", NULL, MMC3, 1, 4, 1, 24, 0), + + PXA3XX_CKEN_1RATE("pxa27x-keypad", NULL, KEYPAD, + pxa3xx_32Khz_bus_parents), + PXA3XX_CKEN_1RATE("pxa3xx-ssp.0", NULL, SSP1, pxa3xx_13MHz_bus_parents), + PXA3XX_CKEN_1RATE("pxa3xx-ssp.1", NULL, SSP2, pxa3xx_13MHz_bus_parents), + PXA3XX_CKEN_1RATE("pxa3xx-ssp.2", NULL, SSP3, pxa3xx_13MHz_bus_parents), + PXA3XX_CKEN_1RATE("pxa3xx-ssp.3", NULL, SSP4, pxa3xx_13MHz_bus_parents), + + PXA3XX_CKEN(NULL, "AC97CLK", pxa3xx_ac97_bus_parents, 1, 4, 1, 1, AC97, + pxa3xx_is_ring_osc_forced, 0), + PXA3XX_CKEN(NULL, "CAMCLK", pxa3xx_sbus_parents, 1, 2, 1, 1, CAMERA, + pxa3xx_is_ring_osc_forced, 0), + PXA3XX_CKEN("pxa2xx-fb", NULL, pxa3xx_sbus_parents, 1, 1, 1, 1, LCD, + pxa3xx_is_ring_osc_forced, 0), + PXA3XX_CKEN("pxa2xx-pcmcia", NULL, pxa3xx_smemcbus_parents, 1, 4, + 1, 1, SMC, pxa3xx_is_ring_osc_forced, CLK_IGNORE_UNUSED), +}; + +static struct desc_clk_cken pxa300_310_clocks[] __initdata = { + + PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0), + PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0), + PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents), +}; + +static struct desc_clk_cken pxa320_clocks[] __initdata = { + PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 6, 0), + PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA320_GCU, 1, 1, 1, 1, 0), + PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents), +}; + +static struct desc_clk_cken pxa93x_clocks[] __initdata = { + + PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0), + PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0), + PXA3XX_CKEN_1RATE("pxa93x-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents), +}; + +static unsigned long clk_pxa3xx_system_bus_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long acsr = readl(clk_regs + ACSR); + unsigned int hss = (acsr >> 14) & 0x3; + + if (pxa3xx_is_ring_osc_forced()) + return parent_rate; + return parent_rate / 48 * hss_mult[hss]; +} + +static u8 clk_pxa3xx_system_bus_get_parent(struct clk_hw *hw) +{ + if (pxa3xx_is_ring_osc_forced()) + return PXA_BUS_60Mhz; + else + return PXA_BUS_HSS; +} + +PARENTS(clk_pxa3xx_system_bus) = { "ring_osc_60mhz", "spll_624mhz" }; +MUX_RO_RATE_RO_OPS(clk_pxa3xx_system_bus, "system_bus"); + +static unsigned long clk_pxa3xx_core_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return parent_rate; +} + +static u8 clk_pxa3xx_core_get_parent(struct clk_hw *hw) +{ + unsigned long xclkcfg; + unsigned int t; + + if (pxa3xx_is_ring_osc_forced()) + return PXA_CORE_60Mhz; + + /* Read XCLKCFG register turbo bit */ + __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg)); + t = xclkcfg & 0x1; + + if (t) + return PXA_CORE_TURBO; + return PXA_CORE_RUN; +} +PARENTS(clk_pxa3xx_core) = { "ring_osc_60mhz", "run", "cpll" }; +MUX_RO_RATE_RO_OPS(clk_pxa3xx_core, "core"); + +static unsigned long clk_pxa3xx_run_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long acsr = readl(clk_regs + ACSR); + unsigned int xn = (acsr & ACCR_XN_MASK) >> 8; + unsigned int t, xclkcfg; + + /* Read XCLKCFG register turbo bit */ + __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg)); + t = xclkcfg & 0x1; + + return t ? (parent_rate / xn) * 2 : parent_rate; +} +PARENTS(clk_pxa3xx_run) = { "cpll" }; +RATE_RO_OPS(clk_pxa3xx_run, "run"); + +static unsigned long clk_pxa3xx_cpll_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long acsr = readl(clk_regs + ACSR); + unsigned int xn = (acsr & ACCR_XN_MASK) >> 8; + unsigned int xl = acsr & ACCR_XL_MASK; + unsigned int t, xclkcfg; + + /* Read XCLKCFG register turbo bit */ + __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg)); + t = xclkcfg & 0x1; + + pr_info("RJK: parent_rate=%lu, xl=%u, xn=%u\n", parent_rate, xl, xn); + return t ? parent_rate * xl * xn : parent_rate * xl; +} +PARENTS(clk_pxa3xx_cpll) = { "osc_13mhz" }; +RATE_RO_OPS(clk_pxa3xx_cpll, "cpll"); + +static void __init pxa3xx_register_core(void) +{ + clk_register_clk_pxa3xx_cpll(); + clk_register_clk_pxa3xx_run(); + + clkdev_pxa_register(CLK_CORE, "core", NULL, + clk_register_clk_pxa3xx_core()); +} + +static void __init pxa3xx_register_plls(void) +{ + clk_register_fixed_rate(NULL, "osc_13mhz", NULL, + CLK_GET_RATE_NOCACHE, + 13 * MHz); + clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL, + clk_register_fixed_rate(NULL, "osc_32_768khz", NULL, + CLK_GET_RATE_NOCACHE, + 32768)); + clk_register_fixed_rate(NULL, "ring_osc_120mhz", NULL, + CLK_GET_RATE_NOCACHE, + 120 * MHz); + clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0); + clk_register_fixed_factor(NULL, "spll_624mhz", "osc_13mhz", 0, 48, 1); + clk_register_fixed_factor(NULL, "ring_osc_60mhz", "ring_osc_120mhz", + 0, 1, 2); +} + +#define DUMMY_CLK(_con_id, _dev_id, _parent) \ + { .con_id = _con_id, .dev_id = _dev_id, .parent = _parent } +struct dummy_clk { + const char *con_id; + const char *dev_id; + const char *parent; +}; +static struct dummy_clk dummy_clks[] __initdata = { + DUMMY_CLK(NULL, "pxa93x-gpio", "osc_13mhz"), + DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"), + DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"), + DUMMY_CLK(NULL, "pxa3xx-pwri2c.1", "osc_13mhz"), +}; + +static void __init pxa3xx_dummy_clocks_init(void) +{ + struct clk *clk; + struct dummy_clk *d; + const char *name; + int i; + + for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) { + d = &dummy_clks[i]; + name = d->dev_id ? d->dev_id : d->con_id; + clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1); + clk_register_clkdev(clk, d->con_id, d->dev_id); + } +} + +static void __init pxa3xx_base_clocks_init(void __iomem *oscc_reg) +{ + struct clk *clk; + + pxa3xx_register_plls(); + pxa3xx_register_core(); + clk_register_clk_pxa3xx_system_bus(); + clk_register_clk_pxa3xx_ac97(); + clk_register_clk_pxa3xx_smemc(); + clk = clk_register_gate(NULL, "CLK_POUT", + "osc_13mhz", 0, oscc_reg, 11, 0, NULL); + clk_register_clkdev(clk, "CLK_POUT", NULL); + clkdev_pxa_register(CLK_OSTIMER, "OSTIMER0", NULL, + clk_register_fixed_factor(NULL, "os-timer0", + "osc_13mhz", 0, 1, 4)); +} + +int __init pxa3xx_clocks_init(void __iomem *regs, void __iomem *oscc_reg) +{ + int ret; + + clk_regs = regs; + pxa3xx_base_clocks_init(oscc_reg); + pxa3xx_dummy_clocks_init(); + ret = clk_pxa_cken_init(pxa3xx_clocks, ARRAY_SIZE(pxa3xx_clocks), regs); + if (ret) + return ret; + if (cpu_is_pxa320()) + return clk_pxa_cken_init(pxa320_clocks, + ARRAY_SIZE(pxa320_clocks), regs); + if (cpu_is_pxa300() || cpu_is_pxa310()) + return clk_pxa_cken_init(pxa300_310_clocks, + ARRAY_SIZE(pxa300_310_clocks), regs); + return clk_pxa_cken_init(pxa93x_clocks, ARRAY_SIZE(pxa93x_clocks), regs); +} + +static void __init pxa3xx_dt_clocks_init(struct device_node *np) +{ + pxa3xx_clocks_init(ioremap(0x41340000, 0x10), ioremap(0x41350000, 4)); + clk_pxa_dt_common_init(np); +} +CLK_OF_DECLARE(pxa_clks, "marvell,pxa300-clocks", pxa3xx_dt_clocks_init); |