diff options
Diffstat (limited to 'drivers/crypto/cavium/nitrox/nitrox_main.c')
-rw-r--r-- | drivers/crypto/cavium/nitrox/nitrox_main.c | 582 |
1 files changed, 582 insertions, 0 deletions
diff --git a/drivers/crypto/cavium/nitrox/nitrox_main.c b/drivers/crypto/cavium/nitrox/nitrox_main.c new file mode 100644 index 0000000000..65114f766e --- /dev/null +++ b/drivers/crypto/cavium/nitrox/nitrox_main.c @@ -0,0 +1,582 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include "nitrox_dev.h" +#include "nitrox_common.h" +#include "nitrox_csr.h" +#include "nitrox_hal.h" +#include "nitrox_isr.h" +#include "nitrox_debugfs.h" + +#define CNN55XX_DEV_ID 0x12 +#define UCODE_HLEN 48 +#define DEFAULT_SE_GROUP 0 +#define DEFAULT_AE_GROUP 0 + +#define DRIVER_VERSION "1.2" +#define CNN55XX_UCD_BLOCK_SIZE 32768 +#define CNN55XX_MAX_UCODE_SIZE (CNN55XX_UCD_BLOCK_SIZE * 2) +#define FW_DIR "cavium/" +/* SE microcode */ +#define SE_FW FW_DIR "cnn55xx_se.fw" +/* AE microcode */ +#define AE_FW FW_DIR "cnn55xx_ae.fw" + +static const char nitrox_driver_name[] = "CNN55XX"; + +static LIST_HEAD(ndevlist); +static DEFINE_MUTEX(devlist_lock); +static unsigned int num_devices; + +/* + * nitrox_pci_tbl - PCI Device ID Table + */ +static const struct pci_device_id nitrox_pci_tbl[] = { + {PCI_VDEVICE(CAVIUM, CNN55XX_DEV_ID), 0}, + /* required last entry */ + {0, } +}; +MODULE_DEVICE_TABLE(pci, nitrox_pci_tbl); + +static unsigned int qlen = DEFAULT_CMD_QLEN; +module_param(qlen, uint, 0644); +MODULE_PARM_DESC(qlen, "Command queue length - default 2048"); + +/** + * struct ucode - Firmware Header + * @id: microcode ID + * @version: firmware version + * @code_size: code section size + * @raz: alignment + * @code: code section + */ +struct ucode { + u8 id; + char version[VERSION_LEN - 1]; + __be32 code_size; + u8 raz[12]; + u64 code[]; +}; + +/* + * write_to_ucd_unit - Write Firmware to NITROX UCD unit + */ +static void write_to_ucd_unit(struct nitrox_device *ndev, u32 ucode_size, + u64 *ucode_data, int block_num) +{ + u32 code_size; + u64 offset, data; + int i = 0; + + /* + * UCD structure + * + * ------------- + * | BLK 7 | + * ------------- + * | BLK 6 | + * ------------- + * | ... | + * ------------- + * | BLK 0 | + * ------------- + * Total of 8 blocks, each size 32KB + */ + + /* set the block number */ + offset = UCD_UCODE_LOAD_BLOCK_NUM; + nitrox_write_csr(ndev, offset, block_num); + + code_size = roundup(ucode_size, 16); + while (code_size) { + data = ucode_data[i]; + /* write 8 bytes at a time */ + offset = UCD_UCODE_LOAD_IDX_DATAX(i); + nitrox_write_csr(ndev, offset, data); + code_size -= 8; + i++; + } + + usleep_range(300, 400); +} + +static int nitrox_load_fw(struct nitrox_device *ndev) +{ + const struct firmware *fw; + const char *fw_name; + struct ucode *ucode; + u64 *ucode_data; + u64 offset; + union ucd_core_eid_ucode_block_num core_2_eid_val; + union aqm_grp_execmsk_lo aqm_grp_execmask_lo; + union aqm_grp_execmsk_hi aqm_grp_execmask_hi; + u32 ucode_size; + int ret, i = 0; + + fw_name = SE_FW; + dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name); + + ret = request_firmware(&fw, fw_name, DEV(ndev)); + if (ret < 0) { + dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name); + return ret; + } + + ucode = (struct ucode *)fw->data; + + ucode_size = be32_to_cpu(ucode->code_size) * 2; + if (!ucode_size || ucode_size > CNN55XX_MAX_UCODE_SIZE) { + dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n", + ucode_size, fw_name); + release_firmware(fw); + return -EINVAL; + } + ucode_data = ucode->code; + + /* copy the firmware version */ + memcpy(&ndev->hw.fw_name[0][0], ucode->version, (VERSION_LEN - 2)); + ndev->hw.fw_name[0][VERSION_LEN - 1] = '\0'; + + /* Load SE Firmware on UCD Block 0 */ + write_to_ucd_unit(ndev, ucode_size, ucode_data, 0); + + release_firmware(fw); + + /* put all SE cores in DEFAULT_SE_GROUP */ + offset = POM_GRP_EXECMASKX(DEFAULT_SE_GROUP); + nitrox_write_csr(ndev, offset, (~0ULL)); + + /* write block number and firmware length + * bit:<2:0> block number + * bit:3 is set SE uses 32KB microcode + * bit:3 is clear SE uses 64KB microcode + */ + core_2_eid_val.value = 0ULL; + core_2_eid_val.ucode_blk = 0; + if (ucode_size <= CNN55XX_UCD_BLOCK_SIZE) + core_2_eid_val.ucode_len = 1; + else + core_2_eid_val.ucode_len = 0; + + for (i = 0; i < ndev->hw.se_cores; i++) { + offset = UCD_SE_EID_UCODE_BLOCK_NUMX(i); + nitrox_write_csr(ndev, offset, core_2_eid_val.value); + } + + + fw_name = AE_FW; + dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name); + + ret = request_firmware(&fw, fw_name, DEV(ndev)); + if (ret < 0) { + dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name); + return ret; + } + + ucode = (struct ucode *)fw->data; + + ucode_size = be32_to_cpu(ucode->code_size) * 2; + if (!ucode_size || ucode_size > CNN55XX_MAX_UCODE_SIZE) { + dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n", + ucode_size, fw_name); + release_firmware(fw); + return -EINVAL; + } + ucode_data = ucode->code; + + /* copy the firmware version */ + memcpy(&ndev->hw.fw_name[1][0], ucode->version, (VERSION_LEN - 2)); + ndev->hw.fw_name[1][VERSION_LEN - 1] = '\0'; + + /* Load AE Firmware on UCD Block 2 */ + write_to_ucd_unit(ndev, ucode_size, ucode_data, 2); + + release_firmware(fw); + + /* put all AE cores in DEFAULT_AE_GROUP */ + offset = AQM_GRP_EXECMSK_LOX(DEFAULT_AE_GROUP); + aqm_grp_execmask_lo.exec_0_to_39 = 0xFFFFFFFFFFULL; + nitrox_write_csr(ndev, offset, aqm_grp_execmask_lo.value); + offset = AQM_GRP_EXECMSK_HIX(DEFAULT_AE_GROUP); + aqm_grp_execmask_hi.exec_40_to_79 = 0xFFFFFFFFFFULL; + nitrox_write_csr(ndev, offset, aqm_grp_execmask_hi.value); + + /* write block number and firmware length + * bit:<2:0> block number + * bit:3 is set AE uses 32KB microcode + * bit:3 is clear AE uses 64KB microcode + */ + core_2_eid_val.value = 0ULL; + core_2_eid_val.ucode_blk = 2; + if (ucode_size <= CNN55XX_UCD_BLOCK_SIZE) + core_2_eid_val.ucode_len = 1; + else + core_2_eid_val.ucode_len = 0; + + for (i = 0; i < ndev->hw.ae_cores; i++) { + offset = UCD_AE_EID_UCODE_BLOCK_NUMX(i); + nitrox_write_csr(ndev, offset, core_2_eid_val.value); + } + + return 0; +} + +/** + * nitrox_add_to_devlist - add NITROX device to global device list + * @ndev: NITROX device + */ +static int nitrox_add_to_devlist(struct nitrox_device *ndev) +{ + struct nitrox_device *dev; + int ret = 0; + + INIT_LIST_HEAD(&ndev->list); + refcount_set(&ndev->refcnt, 1); + + mutex_lock(&devlist_lock); + list_for_each_entry(dev, &ndevlist, list) { + if (dev == ndev) { + ret = -EEXIST; + goto unlock; + } + } + ndev->idx = num_devices++; + list_add_tail(&ndev->list, &ndevlist); +unlock: + mutex_unlock(&devlist_lock); + return ret; +} + +/** + * nitrox_remove_from_devlist - remove NITROX device from + * global device list + * @ndev: NITROX device + */ +static void nitrox_remove_from_devlist(struct nitrox_device *ndev) +{ + mutex_lock(&devlist_lock); + list_del(&ndev->list); + num_devices--; + mutex_unlock(&devlist_lock); +} + +struct nitrox_device *nitrox_get_first_device(void) +{ + struct nitrox_device *ndev = NULL, *iter; + + mutex_lock(&devlist_lock); + list_for_each_entry(iter, &ndevlist, list) { + if (nitrox_ready(iter)) { + ndev = iter; + break; + } + } + mutex_unlock(&devlist_lock); + if (!ndev) + return NULL; + + refcount_inc(&ndev->refcnt); + /* barrier to sync with other cpus */ + smp_mb__after_atomic(); + return ndev; +} + +void nitrox_put_device(struct nitrox_device *ndev) +{ + if (!ndev) + return; + + refcount_dec(&ndev->refcnt); + /* barrier to sync with other cpus */ + smp_mb__after_atomic(); +} + +static int nitrox_device_flr(struct pci_dev *pdev) +{ + int pos = 0; + + pos = pci_save_state(pdev); + if (pos) { + dev_err(&pdev->dev, "Failed to save pci state\n"); + return -ENOMEM; + } + + pcie_reset_flr(pdev, PCI_RESET_DO_RESET); + + pci_restore_state(pdev); + + return 0; +} + +static int nitrox_pf_sw_init(struct nitrox_device *ndev) +{ + int err; + + err = nitrox_common_sw_init(ndev); + if (err) + return err; + + err = nitrox_register_interrupts(ndev); + if (err) + nitrox_common_sw_cleanup(ndev); + + return err; +} + +static void nitrox_pf_sw_cleanup(struct nitrox_device *ndev) +{ + nitrox_unregister_interrupts(ndev); + nitrox_common_sw_cleanup(ndev); +} + +/** + * nitrox_bist_check - Check NITROX BIST registers status + * @ndev: NITROX device + */ +static int nitrox_bist_check(struct nitrox_device *ndev) +{ + u64 value = 0; + int i; + + for (i = 0; i < NR_CLUSTERS; i++) { + value += nitrox_read_csr(ndev, EMU_BIST_STATUSX(i)); + value += nitrox_read_csr(ndev, EFL_CORE_BIST_REGX(i)); + } + value += nitrox_read_csr(ndev, UCD_BIST_STATUS); + value += nitrox_read_csr(ndev, NPS_CORE_BIST_REG); + value += nitrox_read_csr(ndev, NPS_CORE_NPC_BIST_REG); + value += nitrox_read_csr(ndev, NPS_PKT_SLC_BIST_REG); + value += nitrox_read_csr(ndev, NPS_PKT_IN_BIST_REG); + value += nitrox_read_csr(ndev, POM_BIST_REG); + value += nitrox_read_csr(ndev, BMI_BIST_REG); + value += nitrox_read_csr(ndev, EFL_TOP_BIST_STAT); + value += nitrox_read_csr(ndev, BMO_BIST_REG); + value += nitrox_read_csr(ndev, LBC_BIST_STATUS); + value += nitrox_read_csr(ndev, PEM_BIST_STATUSX(0)); + if (value) + return -EIO; + return 0; +} + +static int nitrox_pf_hw_init(struct nitrox_device *ndev) +{ + int err; + + err = nitrox_bist_check(ndev); + if (err) { + dev_err(&ndev->pdev->dev, "BIST check failed\n"); + return err; + } + /* get cores information */ + nitrox_get_hwinfo(ndev); + + nitrox_config_nps_core_unit(ndev); + nitrox_config_aqm_unit(ndev); + nitrox_config_nps_pkt_unit(ndev); + nitrox_config_pom_unit(ndev); + nitrox_config_efl_unit(ndev); + /* configure IO units */ + nitrox_config_bmi_unit(ndev); + nitrox_config_bmo_unit(ndev); + /* configure Local Buffer Cache */ + nitrox_config_lbc_unit(ndev); + nitrox_config_rand_unit(ndev); + + /* load firmware on cores */ + err = nitrox_load_fw(ndev); + if (err) + return err; + + nitrox_config_emu_unit(ndev); + + return 0; +} + +/** + * nitrox_probe - NITROX Initialization function. + * @pdev: PCI device information struct + * @id: entry in nitrox_pci_tbl + * + * Return: 0, if the driver is bound to the device, or + * a negative error if there is failure. + */ +static int nitrox_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct nitrox_device *ndev; + int err; + + dev_info_once(&pdev->dev, "%s driver version %s\n", + nitrox_driver_name, DRIVER_VERSION); + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + /* do FLR */ + err = nitrox_device_flr(pdev); + if (err) { + dev_err(&pdev->dev, "FLR failed\n"); + goto flr_fail; + } + + if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { + dev_dbg(&pdev->dev, "DMA to 64-BIT address\n"); + } else { + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, "DMA configuration failed\n"); + goto flr_fail; + } + } + + err = pci_request_mem_regions(pdev, nitrox_driver_name); + if (err) + goto flr_fail; + pci_set_master(pdev); + + ndev = kzalloc(sizeof(*ndev), GFP_KERNEL); + if (!ndev) { + err = -ENOMEM; + goto ndev_fail; + } + + pci_set_drvdata(pdev, ndev); + ndev->pdev = pdev; + + /* add to device list */ + nitrox_add_to_devlist(ndev); + + ndev->hw.vendor_id = pdev->vendor; + ndev->hw.device_id = pdev->device; + ndev->hw.revision_id = pdev->revision; + /* command timeout in jiffies */ + ndev->timeout = msecs_to_jiffies(CMD_TIMEOUT); + ndev->node = dev_to_node(&pdev->dev); + if (ndev->node == NUMA_NO_NODE) + ndev->node = 0; + + ndev->bar_addr = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!ndev->bar_addr) { + err = -EIO; + goto ioremap_err; + } + /* allocate command queus based on cpus, max queues are 64 */ + ndev->nr_queues = min_t(u32, MAX_PF_QUEUES, num_online_cpus()); + ndev->qlen = qlen; + + err = nitrox_pf_sw_init(ndev); + if (err) + goto pf_sw_fail; + + err = nitrox_pf_hw_init(ndev); + if (err) + goto pf_hw_fail; + + nitrox_debugfs_init(ndev); + + /* clear the statistics */ + atomic64_set(&ndev->stats.posted, 0); + atomic64_set(&ndev->stats.completed, 0); + atomic64_set(&ndev->stats.dropped, 0); + + atomic_set(&ndev->state, __NDEV_READY); + /* barrier to sync with other cpus */ + smp_mb__after_atomic(); + + err = nitrox_crypto_register(); + if (err) + goto crypto_fail; + + return 0; + +crypto_fail: + nitrox_debugfs_exit(ndev); + atomic_set(&ndev->state, __NDEV_NOT_READY); + /* barrier to sync with other cpus */ + smp_mb__after_atomic(); +pf_hw_fail: + nitrox_pf_sw_cleanup(ndev); +pf_sw_fail: + iounmap(ndev->bar_addr); +ioremap_err: + nitrox_remove_from_devlist(ndev); + kfree(ndev); + pci_set_drvdata(pdev, NULL); +ndev_fail: + pci_release_mem_regions(pdev); +flr_fail: + pci_disable_device(pdev); + return err; +} + +/** + * nitrox_remove - Unbind the driver from the device. + * @pdev: PCI device information struct + */ +static void nitrox_remove(struct pci_dev *pdev) +{ + struct nitrox_device *ndev = pci_get_drvdata(pdev); + + if (!ndev) + return; + + if (!refcount_dec_and_test(&ndev->refcnt)) { + dev_err(DEV(ndev), "Device refcnt not zero (%d)\n", + refcount_read(&ndev->refcnt)); + return; + } + + dev_info(DEV(ndev), "Removing Device %x:%x\n", + ndev->hw.vendor_id, ndev->hw.device_id); + + atomic_set(&ndev->state, __NDEV_NOT_READY); + /* barrier to sync with other cpus */ + smp_mb__after_atomic(); + + nitrox_remove_from_devlist(ndev); + + /* disable SR-IOV */ + nitrox_sriov_configure(pdev, 0); + nitrox_crypto_unregister(); + nitrox_debugfs_exit(ndev); + nitrox_pf_sw_cleanup(ndev); + + iounmap(ndev->bar_addr); + kfree(ndev); + + pci_set_drvdata(pdev, NULL); + pci_release_mem_regions(pdev); + pci_disable_device(pdev); +} + +static void nitrox_shutdown(struct pci_dev *pdev) +{ + pci_set_drvdata(pdev, NULL); + pci_release_mem_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_driver nitrox_driver = { + .name = nitrox_driver_name, + .id_table = nitrox_pci_tbl, + .probe = nitrox_probe, + .remove = nitrox_remove, + .shutdown = nitrox_shutdown, + .sriov_configure = nitrox_sriov_configure, +}; + +module_pci_driver(nitrox_driver); + +MODULE_AUTHOR("Srikanth Jampala <Jampala.Srikanth@cavium.com>"); +MODULE_DESCRIPTION("Cavium CNN55XX PF Driver" DRIVER_VERSION " "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_FIRMWARE(SE_FW); |