summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/nx/nx-common-powernv.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/crypto/nx/nx-common-powernv.c')
-rw-r--r--drivers/crypto/nx/nx-common-powernv.c1135
1 files changed, 1135 insertions, 0 deletions
diff --git a/drivers/crypto/nx/nx-common-powernv.c b/drivers/crypto/nx/nx-common-powernv.c
new file mode 100644
index 0000000000..8c859872c1
--- /dev/null
+++ b/drivers/crypto/nx/nx-common-powernv.c
@@ -0,0 +1,1135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for IBM PowerNV compression accelerator
+ *
+ * Copyright (C) 2015 Dan Streetman, IBM Corp
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "nx-842.h"
+
+#include <linux/timer.h>
+
+#include <asm/prom.h>
+#include <asm/icswx.h>
+#include <asm/vas.h>
+#include <asm/reg.h>
+#include <asm/opal-api.h>
+#include <asm/opal.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>");
+MODULE_DESCRIPTION("H/W Compression driver for IBM PowerNV processors");
+MODULE_ALIAS_CRYPTO("842");
+MODULE_ALIAS_CRYPTO("842-nx");
+
+#define WORKMEM_ALIGN (CRB_ALIGN)
+#define CSB_WAIT_MAX (5000) /* ms */
+#define VAS_RETRIES (10)
+
+struct nx842_workmem {
+ /* Below fields must be properly aligned */
+ struct coprocessor_request_block crb; /* CRB_ALIGN align */
+ struct data_descriptor_entry ddl_in[DDL_LEN_MAX]; /* DDE_ALIGN align */
+ struct data_descriptor_entry ddl_out[DDL_LEN_MAX]; /* DDE_ALIGN align */
+ /* Above fields must be properly aligned */
+
+ ktime_t start;
+
+ char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */
+} __packed __aligned(WORKMEM_ALIGN);
+
+struct nx_coproc {
+ unsigned int chip_id;
+ unsigned int ct; /* Can be 842 or GZIP high/normal*/
+ unsigned int ci; /* Coprocessor instance, used with icswx */
+ struct {
+ struct vas_window *rxwin;
+ int id;
+ } vas;
+ struct list_head list;
+};
+
+/*
+ * Send the request to NX engine on the chip for the corresponding CPU
+ * where the process is executing. Use with VAS function.
+ */
+static DEFINE_PER_CPU(struct vas_window *, cpu_txwin);
+
+/* no cpu hotplug on powernv, so this list never changes after init */
+static LIST_HEAD(nx_coprocs);
+static unsigned int nx842_ct; /* used in icswx function */
+
+/*
+ * Using same values as in skiboot or coprocessor type representing
+ * in NX workbook.
+ */
+#define NX_CT_GZIP (2) /* on P9 and later */
+#define NX_CT_842 (3)
+
+static int (*nx842_powernv_exec)(const unsigned char *in,
+ unsigned int inlen, unsigned char *out,
+ unsigned int *outlenp, void *workmem, int fc);
+
+/*
+ * setup_indirect_dde - Setup an indirect DDE
+ *
+ * The DDE is setup with the DDE count, byte count, and address of
+ * first direct DDE in the list.
+ */
+static void setup_indirect_dde(struct data_descriptor_entry *dde,
+ struct data_descriptor_entry *ddl,
+ unsigned int dde_count, unsigned int byte_count)
+{
+ dde->flags = 0;
+ dde->count = dde_count;
+ dde->index = 0;
+ dde->length = cpu_to_be32(byte_count);
+ dde->address = cpu_to_be64(nx842_get_pa(ddl));
+}
+
+/*
+ * setup_direct_dde - Setup single DDE from buffer
+ *
+ * The DDE is setup with the buffer and length. The buffer must be properly
+ * aligned. The used length is returned.
+ * Returns:
+ * N Successfully set up DDE with N bytes
+ */
+static unsigned int setup_direct_dde(struct data_descriptor_entry *dde,
+ unsigned long pa, unsigned int len)
+{
+ unsigned int l = min_t(unsigned int, len, LEN_ON_PAGE(pa));
+
+ dde->flags = 0;
+ dde->count = 0;
+ dde->index = 0;
+ dde->length = cpu_to_be32(l);
+ dde->address = cpu_to_be64(pa);
+
+ return l;
+}
+
+/*
+ * setup_ddl - Setup DDL from buffer
+ *
+ * Returns:
+ * 0 Successfully set up DDL
+ */
+static int setup_ddl(struct data_descriptor_entry *dde,
+ struct data_descriptor_entry *ddl,
+ unsigned char *buf, unsigned int len,
+ bool in)
+{
+ unsigned long pa = nx842_get_pa(buf);
+ int i, ret, total_len = len;
+
+ if (!IS_ALIGNED(pa, DDE_BUFFER_ALIGN)) {
+ pr_debug("%s buffer pa 0x%lx not 0x%x-byte aligned\n",
+ in ? "input" : "output", pa, DDE_BUFFER_ALIGN);
+ return -EINVAL;
+ }
+
+ /* only need to check last mult; since buffer must be
+ * DDE_BUFFER_ALIGN aligned, and that is a multiple of
+ * DDE_BUFFER_SIZE_MULT, and pre-last page DDE buffers
+ * are guaranteed a multiple of DDE_BUFFER_SIZE_MULT.
+ */
+ if (len % DDE_BUFFER_LAST_MULT) {
+ pr_debug("%s buffer len 0x%x not a multiple of 0x%x\n",
+ in ? "input" : "output", len, DDE_BUFFER_LAST_MULT);
+ if (in)
+ return -EINVAL;
+ len = round_down(len, DDE_BUFFER_LAST_MULT);
+ }
+
+ /* use a single direct DDE */
+ if (len <= LEN_ON_PAGE(pa)) {
+ ret = setup_direct_dde(dde, pa, len);
+ WARN_ON(ret < len);
+ return 0;
+ }
+
+ /* use the DDL */
+ for (i = 0; i < DDL_LEN_MAX && len > 0; i++) {
+ ret = setup_direct_dde(&ddl[i], pa, len);
+ buf += ret;
+ len -= ret;
+ pa = nx842_get_pa(buf);
+ }
+
+ if (len > 0) {
+ pr_debug("0x%x total %s bytes 0x%x too many for DDL.\n",
+ total_len, in ? "input" : "output", len);
+ if (in)
+ return -EMSGSIZE;
+ total_len -= len;
+ }
+ setup_indirect_dde(dde, ddl, i, total_len);
+
+ return 0;
+}
+
+#define CSB_ERR(csb, msg, ...) \
+ pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n", \
+ ##__VA_ARGS__, (csb)->flags, \
+ (csb)->cs, (csb)->cc, (csb)->ce, \
+ be32_to_cpu((csb)->count))
+
+#define CSB_ERR_ADDR(csb, msg, ...) \
+ CSB_ERR(csb, msg " at %lx", ##__VA_ARGS__, \
+ (unsigned long)be64_to_cpu((csb)->address))
+
+static int wait_for_csb(struct nx842_workmem *wmem,
+ struct coprocessor_status_block *csb)
+{
+ ktime_t start = wmem->start, now = ktime_get();
+ ktime_t timeout = ktime_add_ms(start, CSB_WAIT_MAX);
+
+ while (!(READ_ONCE(csb->flags) & CSB_V)) {
+ cpu_relax();
+ now = ktime_get();
+ if (ktime_after(now, timeout))
+ break;
+ }
+
+ /* hw has updated csb and output buffer */
+ barrier();
+
+ /* check CSB flags */
+ if (!(csb->flags & CSB_V)) {
+ CSB_ERR(csb, "CSB still not valid after %ld us, giving up",
+ (long)ktime_us_delta(now, start));
+ return -ETIMEDOUT;
+ }
+ if (csb->flags & CSB_F) {
+ CSB_ERR(csb, "Invalid CSB format");
+ return -EPROTO;
+ }
+ if (csb->flags & CSB_CH) {
+ CSB_ERR(csb, "Invalid CSB chaining state");
+ return -EPROTO;
+ }
+
+ /* verify CSB completion sequence is 0 */
+ if (csb->cs) {
+ CSB_ERR(csb, "Invalid CSB completion sequence");
+ return -EPROTO;
+ }
+
+ /* check CSB Completion Code */
+ switch (csb->cc) {
+ /* no error */
+ case CSB_CC_SUCCESS:
+ break;
+ case CSB_CC_TPBC_GT_SPBC:
+ /* not an error, but the compressed data is
+ * larger than the uncompressed data :(
+ */
+ break;
+
+ /* input data errors */
+ case CSB_CC_OPERAND_OVERLAP:
+ /* input and output buffers overlap */
+ CSB_ERR(csb, "Operand Overlap error");
+ return -EINVAL;
+ case CSB_CC_INVALID_OPERAND:
+ CSB_ERR(csb, "Invalid operand");
+ return -EINVAL;
+ case CSB_CC_NOSPC:
+ /* output buffer too small */
+ return -ENOSPC;
+ case CSB_CC_ABORT:
+ CSB_ERR(csb, "Function aborted");
+ return -EINTR;
+ case CSB_CC_CRC_MISMATCH:
+ CSB_ERR(csb, "CRC mismatch");
+ return -EINVAL;
+ case CSB_CC_TEMPL_INVALID:
+ CSB_ERR(csb, "Compressed data template invalid");
+ return -EINVAL;
+ case CSB_CC_TEMPL_OVERFLOW:
+ CSB_ERR(csb, "Compressed data template shows data past end");
+ return -EINVAL;
+ case CSB_CC_EXCEED_BYTE_COUNT: /* P9 or later */
+ /*
+ * DDE byte count exceeds the limit specified in Maximum
+ * byte count register.
+ */
+ CSB_ERR(csb, "DDE byte count exceeds the limit");
+ return -EINVAL;
+
+ /* these should not happen */
+ case CSB_CC_INVALID_ALIGN:
+ /* setup_ddl should have detected this */
+ CSB_ERR_ADDR(csb, "Invalid alignment");
+ return -EINVAL;
+ case CSB_CC_DATA_LENGTH:
+ /* setup_ddl should have detected this */
+ CSB_ERR(csb, "Invalid data length");
+ return -EINVAL;
+ case CSB_CC_WR_TRANSLATION:
+ case CSB_CC_TRANSLATION:
+ case CSB_CC_TRANSLATION_DUP1:
+ case CSB_CC_TRANSLATION_DUP2:
+ case CSB_CC_TRANSLATION_DUP3:
+ case CSB_CC_TRANSLATION_DUP4:
+ case CSB_CC_TRANSLATION_DUP5:
+ case CSB_CC_TRANSLATION_DUP6:
+ /* should not happen, we use physical addrs */
+ CSB_ERR_ADDR(csb, "Translation error");
+ return -EPROTO;
+ case CSB_CC_WR_PROTECTION:
+ case CSB_CC_PROTECTION:
+ case CSB_CC_PROTECTION_DUP1:
+ case CSB_CC_PROTECTION_DUP2:
+ case CSB_CC_PROTECTION_DUP3:
+ case CSB_CC_PROTECTION_DUP4:
+ case CSB_CC_PROTECTION_DUP5:
+ case CSB_CC_PROTECTION_DUP6:
+ /* should not happen, we use physical addrs */
+ CSB_ERR_ADDR(csb, "Protection error");
+ return -EPROTO;
+ case CSB_CC_PRIVILEGE:
+ /* shouldn't happen, we're in HYP mode */
+ CSB_ERR(csb, "Insufficient Privilege error");
+ return -EPROTO;
+ case CSB_CC_EXCESSIVE_DDE:
+ /* shouldn't happen, setup_ddl doesn't use many dde's */
+ CSB_ERR(csb, "Too many DDEs in DDL");
+ return -EINVAL;
+ case CSB_CC_TRANSPORT:
+ case CSB_CC_INVALID_CRB: /* P9 or later */
+ /* shouldn't happen, we setup CRB correctly */
+ CSB_ERR(csb, "Invalid CRB");
+ return -EINVAL;
+ case CSB_CC_INVALID_DDE: /* P9 or later */
+ /*
+ * shouldn't happen, setup_direct/indirect_dde creates
+ * DDE right
+ */
+ CSB_ERR(csb, "Invalid DDE");
+ return -EINVAL;
+ case CSB_CC_SEGMENTED_DDL:
+ /* shouldn't happen, setup_ddl creates DDL right */
+ CSB_ERR(csb, "Segmented DDL error");
+ return -EINVAL;
+ case CSB_CC_DDE_OVERFLOW:
+ /* shouldn't happen, setup_ddl creates DDL right */
+ CSB_ERR(csb, "DDE overflow error");
+ return -EINVAL;
+ case CSB_CC_SESSION:
+ /* should not happen with ICSWX */
+ CSB_ERR(csb, "Session violation error");
+ return -EPROTO;
+ case CSB_CC_CHAIN:
+ /* should not happen, we don't use chained CRBs */
+ CSB_ERR(csb, "Chained CRB error");
+ return -EPROTO;
+ case CSB_CC_SEQUENCE:
+ /* should not happen, we don't use chained CRBs */
+ CSB_ERR(csb, "CRB sequence number error");
+ return -EPROTO;
+ case CSB_CC_UNKNOWN_CODE:
+ CSB_ERR(csb, "Unknown subfunction code");
+ return -EPROTO;
+
+ /* hardware errors */
+ case CSB_CC_RD_EXTERNAL:
+ case CSB_CC_RD_EXTERNAL_DUP1:
+ case CSB_CC_RD_EXTERNAL_DUP2:
+ case CSB_CC_RD_EXTERNAL_DUP3:
+ CSB_ERR_ADDR(csb, "Read error outside coprocessor");
+ return -EPROTO;
+ case CSB_CC_WR_EXTERNAL:
+ CSB_ERR_ADDR(csb, "Write error outside coprocessor");
+ return -EPROTO;
+ case CSB_CC_INTERNAL:
+ CSB_ERR(csb, "Internal error in coprocessor");
+ return -EPROTO;
+ case CSB_CC_PROVISION:
+ CSB_ERR(csb, "Storage provision error");
+ return -EPROTO;
+ case CSB_CC_HW:
+ CSB_ERR(csb, "Correctable hardware error");
+ return -EPROTO;
+ case CSB_CC_HW_EXPIRED_TIMER: /* P9 or later */
+ CSB_ERR(csb, "Job did not finish within allowed time");
+ return -EPROTO;
+
+ default:
+ CSB_ERR(csb, "Invalid CC %d", csb->cc);
+ return -EPROTO;
+ }
+
+ /* check Completion Extension state */
+ if (csb->ce & CSB_CE_TERMINATION) {
+ CSB_ERR(csb, "CSB request was terminated");
+ return -EPROTO;
+ }
+ if (csb->ce & CSB_CE_INCOMPLETE) {
+ CSB_ERR(csb, "CSB request not complete");
+ return -EPROTO;
+ }
+ if (!(csb->ce & CSB_CE_TPBC)) {
+ CSB_ERR(csb, "TPBC not provided, unknown target length");
+ return -EPROTO;
+ }
+
+ /* successful completion */
+ pr_debug_ratelimited("Processed %u bytes in %lu us\n",
+ be32_to_cpu(csb->count),
+ (unsigned long)ktime_us_delta(now, start));
+
+ return 0;
+}
+
+static int nx842_config_crb(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int outlen,
+ struct nx842_workmem *wmem)
+{
+ struct coprocessor_request_block *crb;
+ struct coprocessor_status_block *csb;
+ u64 csb_addr;
+ int ret;
+
+ crb = &wmem->crb;
+ csb = &crb->csb;
+
+ /* Clear any previous values */
+ memset(crb, 0, sizeof(*crb));
+
+ /* set up DDLs */
+ ret = setup_ddl(&crb->source, wmem->ddl_in,
+ (unsigned char *)in, inlen, true);
+ if (ret)
+ return ret;
+
+ ret = setup_ddl(&crb->target, wmem->ddl_out,
+ out, outlen, false);
+ if (ret)
+ return ret;
+
+ /* set up CRB's CSB addr */
+ csb_addr = nx842_get_pa(csb) & CRB_CSB_ADDRESS;
+ csb_addr |= CRB_CSB_AT; /* Addrs are phys */
+ crb->csb_addr = cpu_to_be64(csb_addr);
+
+ return 0;
+}
+
+/**
+ * nx842_exec_icswx - compress/decompress data using the 842 algorithm
+ *
+ * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * This compresses or decompresses the provided input buffer into the provided
+ * output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * output data. If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * The @workmem buffer should only be used by one function call at a time.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ * nx842_powernv_driver.workmem_size
+ * @fc: function code, see CCW Function Codes in nx-842.h
+ *
+ * Returns:
+ * 0 Success, output of length @outlenp stored in the buffer at @out
+ * -ENODEV Hardware unavailable
+ * -ENOSPC Output buffer is to small
+ * -EMSGSIZE Input buffer too large
+ * -EINVAL buffer constraints do not fix nx842_constraints
+ * -EPROTO hardware error during operation
+ * -ETIMEDOUT hardware did not complete operation in reasonable time
+ * -EINTR operation was aborted
+ */
+static int nx842_exec_icswx(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlenp,
+ void *workmem, int fc)
+{
+ struct coprocessor_request_block *crb;
+ struct coprocessor_status_block *csb;
+ struct nx842_workmem *wmem;
+ int ret;
+ u32 ccw;
+ unsigned int outlen = *outlenp;
+
+ wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
+
+ *outlenp = 0;
+
+ /* shoudn't happen, we don't load without a coproc */
+ if (!nx842_ct) {
+ pr_err_ratelimited("coprocessor CT is 0");
+ return -ENODEV;
+ }
+
+ ret = nx842_config_crb(in, inlen, out, outlen, wmem);
+ if (ret)
+ return ret;
+
+ crb = &wmem->crb;
+ csb = &crb->csb;
+
+ /* set up CCW */
+ ccw = 0;
+ ccw = SET_FIELD(CCW_CT, ccw, nx842_ct);
+ ccw = SET_FIELD(CCW_CI_842, ccw, 0); /* use 0 for hw auto-selection */
+ ccw = SET_FIELD(CCW_FC_842, ccw, fc);
+
+ wmem->start = ktime_get();
+
+ /* do ICSWX */
+ ret = icswx(cpu_to_be32(ccw), crb);
+
+ pr_debug_ratelimited("icswx CR %x ccw %x crb->ccw %x\n", ret,
+ (unsigned int)ccw,
+ (unsigned int)be32_to_cpu(crb->ccw));
+
+ /*
+ * NX842 coprocessor sets 3rd bit in CR register with XER[S0].
+ * XER[S0] is the integer summary overflow bit which is nothing
+ * to do NX. Since this bit can be set with other return values,
+ * mask this bit.
+ */
+ ret &= ~ICSWX_XERS0;
+
+ switch (ret) {
+ case ICSWX_INITIATED:
+ ret = wait_for_csb(wmem, csb);
+ break;
+ case ICSWX_BUSY:
+ pr_debug_ratelimited("842 Coprocessor busy\n");
+ ret = -EBUSY;
+ break;
+ case ICSWX_REJECTED:
+ pr_err_ratelimited("ICSWX rejected\n");
+ ret = -EPROTO;
+ break;
+ }
+
+ if (!ret)
+ *outlenp = be32_to_cpu(csb->count);
+
+ return ret;
+}
+
+/**
+ * nx842_exec_vas - compress/decompress data using the 842 algorithm
+ *
+ * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * This compresses or decompresses the provided input buffer into the provided
+ * output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * output data. If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * The @workmem buffer should only be used by one function call at a time.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ * nx842_powernv_driver.workmem_size
+ * @fc: function code, see CCW Function Codes in nx-842.h
+ *
+ * Returns:
+ * 0 Success, output of length @outlenp stored in the buffer
+ * at @out
+ * -ENODEV Hardware unavailable
+ * -ENOSPC Output buffer is to small
+ * -EMSGSIZE Input buffer too large
+ * -EINVAL buffer constraints do not fix nx842_constraints
+ * -EPROTO hardware error during operation
+ * -ETIMEDOUT hardware did not complete operation in reasonable time
+ * -EINTR operation was aborted
+ */
+static int nx842_exec_vas(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlenp,
+ void *workmem, int fc)
+{
+ struct coprocessor_request_block *crb;
+ struct coprocessor_status_block *csb;
+ struct nx842_workmem *wmem;
+ struct vas_window *txwin;
+ int ret, i = 0;
+ u32 ccw;
+ unsigned int outlen = *outlenp;
+
+ wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
+
+ *outlenp = 0;
+
+ crb = &wmem->crb;
+ csb = &crb->csb;
+
+ ret = nx842_config_crb(in, inlen, out, outlen, wmem);
+ if (ret)
+ return ret;
+
+ ccw = 0;
+ ccw = SET_FIELD(CCW_FC_842, ccw, fc);
+ crb->ccw = cpu_to_be32(ccw);
+
+ do {
+ wmem->start = ktime_get();
+ preempt_disable();
+ txwin = this_cpu_read(cpu_txwin);
+
+ /*
+ * VAS copy CRB into L2 cache. Refer <asm/vas.h>.
+ * @crb and @offset.
+ */
+ vas_copy_crb(crb, 0);
+
+ /*
+ * VAS paste previously copied CRB to NX.
+ * @txwin, @offset and @last (must be true).
+ */
+ ret = vas_paste_crb(txwin, 0, 1);
+ preempt_enable();
+ /*
+ * Retry copy/paste function for VAS failures.
+ */
+ } while (ret && (i++ < VAS_RETRIES));
+
+ if (ret) {
+ pr_err_ratelimited("VAS copy/paste failed\n");
+ return ret;
+ }
+
+ ret = wait_for_csb(wmem, csb);
+ if (!ret)
+ *outlenp = be32_to_cpu(csb->count);
+
+ return ret;
+}
+
+/**
+ * nx842_powernv_compress - Compress data using the 842 algorithm
+ *
+ * Compression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * The input buffer is compressed and the result is stored in the
+ * provided output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * compressed data. If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @wmem: working memory buffer pointer, size determined by
+ * nx842_powernv_driver.workmem_size
+ *
+ * Returns: see @nx842_powernv_exec()
+ */
+static int nx842_powernv_compress(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlenp,
+ void *wmem)
+{
+ return nx842_powernv_exec(in, inlen, out, outlenp,
+ wmem, CCW_FC_842_COMP_CRC);
+}
+
+/**
+ * nx842_powernv_decompress - Decompress data using the 842 algorithm
+ *
+ * Decompression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * The input buffer is decompressed and the result is stored in the
+ * provided output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * decompressed data. If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @wmem: working memory buffer pointer, size determined by
+ * nx842_powernv_driver.workmem_size
+ *
+ * Returns: see @nx842_powernv_exec()
+ */
+static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlenp,
+ void *wmem)
+{
+ return nx842_powernv_exec(in, inlen, out, outlenp,
+ wmem, CCW_FC_842_DECOMP_CRC);
+}
+
+static inline void nx_add_coprocs_list(struct nx_coproc *coproc,
+ int chipid)
+{
+ coproc->chip_id = chipid;
+ INIT_LIST_HEAD(&coproc->list);
+ list_add(&coproc->list, &nx_coprocs);
+}
+
+static struct vas_window *nx_alloc_txwin(struct nx_coproc *coproc)
+{
+ struct vas_window *txwin = NULL;
+ struct vas_tx_win_attr txattr;
+
+ /*
+ * Kernel requests will be high priority. So open send
+ * windows only for high priority RxFIFO entries.
+ */
+ vas_init_tx_win_attr(&txattr, coproc->ct);
+ txattr.lpid = 0; /* lpid is 0 for kernel requests */
+
+ /*
+ * Open a VAS send window which is used to send request to NX.
+ */
+ txwin = vas_tx_win_open(coproc->vas.id, coproc->ct, &txattr);
+ if (IS_ERR(txwin))
+ pr_err("ibm,nx-842: Can not open TX window: %ld\n",
+ PTR_ERR(txwin));
+
+ return txwin;
+}
+
+/*
+ * Identify chip ID for each CPU, open send wndow for the corresponding NX
+ * engine and save txwin in percpu cpu_txwin.
+ * cpu_txwin is used in copy/paste operation for each compression /
+ * decompression request.
+ */
+static int nx_open_percpu_txwins(void)
+{
+ struct nx_coproc *coproc, *n;
+ unsigned int i, chip_id;
+
+ for_each_possible_cpu(i) {
+ struct vas_window *txwin = NULL;
+
+ chip_id = cpu_to_chip_id(i);
+
+ list_for_each_entry_safe(coproc, n, &nx_coprocs, list) {
+ /*
+ * Kernel requests use only high priority FIFOs. So
+ * open send windows for these FIFOs.
+ * GZIP is not supported in kernel right now.
+ */
+
+ if (coproc->ct != VAS_COP_TYPE_842_HIPRI)
+ continue;
+
+ if (coproc->chip_id == chip_id) {
+ txwin = nx_alloc_txwin(coproc);
+ if (IS_ERR(txwin))
+ return PTR_ERR(txwin);
+
+ per_cpu(cpu_txwin, i) = txwin;
+ break;
+ }
+ }
+
+ if (!per_cpu(cpu_txwin, i)) {
+ /* shouldn't happen, Each chip will have NX engine */
+ pr_err("NX engine is not available for CPU %d\n", i);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int __init nx_set_ct(struct nx_coproc *coproc, const char *priority,
+ int high, int normal)
+{
+ if (!strcmp(priority, "High"))
+ coproc->ct = high;
+ else if (!strcmp(priority, "Normal"))
+ coproc->ct = normal;
+ else {
+ pr_err("Invalid RxFIFO priority value\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
+ int vasid, int type, int *ct)
+{
+ struct vas_window *rxwin = NULL;
+ struct vas_rx_win_attr rxattr;
+ u32 lpid, pid, tid, fifo_size;
+ struct nx_coproc *coproc;
+ u64 rx_fifo;
+ const char *priority;
+ int ret;
+
+ ret = of_property_read_u64(dn, "rx-fifo-address", &rx_fifo);
+ if (ret) {
+ pr_err("Missing rx-fifo-address property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(dn, "rx-fifo-size", &fifo_size);
+ if (ret) {
+ pr_err("Missing rx-fifo-size property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(dn, "lpid", &lpid);
+ if (ret) {
+ pr_err("Missing lpid property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(dn, "pid", &pid);
+ if (ret) {
+ pr_err("Missing pid property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(dn, "tid", &tid);
+ if (ret) {
+ pr_err("Missing tid property\n");
+ return ret;
+ }
+
+ ret = of_property_read_string(dn, "priority", &priority);
+ if (ret) {
+ pr_err("Missing priority property\n");
+ return ret;
+ }
+
+ coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
+ if (!coproc)
+ return -ENOMEM;
+
+ if (type == NX_CT_842)
+ ret = nx_set_ct(coproc, priority, VAS_COP_TYPE_842_HIPRI,
+ VAS_COP_TYPE_842);
+ else if (type == NX_CT_GZIP)
+ ret = nx_set_ct(coproc, priority, VAS_COP_TYPE_GZIP_HIPRI,
+ VAS_COP_TYPE_GZIP);
+
+ if (ret)
+ goto err_out;
+
+ vas_init_rx_win_attr(&rxattr, coproc->ct);
+ rxattr.rx_fifo = rx_fifo;
+ rxattr.rx_fifo_size = fifo_size;
+ rxattr.lnotify_lpid = lpid;
+ rxattr.lnotify_pid = pid;
+ rxattr.lnotify_tid = tid;
+ /*
+ * Maximum RX window credits can not be more than #CRBs in
+ * RxFIFO. Otherwise, can get checkstop if RxFIFO overruns.
+ */
+ rxattr.wcreds_max = fifo_size / CRB_SIZE;
+
+ /*
+ * Open a VAS receice window which is used to configure RxFIFO
+ * for NX.
+ */
+ rxwin = vas_rx_win_open(vasid, coproc->ct, &rxattr);
+ if (IS_ERR(rxwin)) {
+ ret = PTR_ERR(rxwin);
+ pr_err("setting RxFIFO with VAS failed: %d\n",
+ ret);
+ goto err_out;
+ }
+
+ coproc->vas.rxwin = rxwin;
+ coproc->vas.id = vasid;
+ nx_add_coprocs_list(coproc, chip_id);
+
+ /*
+ * (lpid, pid, tid) combination has to be unique for each
+ * coprocessor instance in the system. So to make it
+ * unique, skiboot uses coprocessor type such as 842 or
+ * GZIP for pid and provides this value to kernel in pid
+ * device-tree property.
+ */
+ *ct = pid;
+
+ return 0;
+
+err_out:
+ kfree(coproc);
+ return ret;
+}
+
+static int __init nx_coproc_init(int chip_id, int ct_842, int ct_gzip)
+{
+ int ret = 0;
+
+ if (opal_check_token(OPAL_NX_COPROC_INIT)) {
+ ret = opal_nx_coproc_init(chip_id, ct_842);
+
+ if (!ret)
+ ret = opal_nx_coproc_init(chip_id, ct_gzip);
+
+ if (ret) {
+ ret = opal_error_code(ret);
+ pr_err("Failed to initialize NX for chip(%d): %d\n",
+ chip_id, ret);
+ }
+ } else
+ pr_warn("Firmware doesn't support NX initialization\n");
+
+ return ret;
+}
+
+static int __init find_nx_device_tree(struct device_node *dn, int chip_id,
+ int vasid, int type, char *devname,
+ int *ct)
+{
+ int ret = 0;
+
+ if (of_device_is_compatible(dn, devname)) {
+ ret = vas_cfg_coproc_info(dn, chip_id, vasid, type, ct);
+ if (ret)
+ of_node_put(dn);
+ }
+
+ return ret;
+}
+
+static int __init nx_powernv_probe_vas(struct device_node *pn)
+{
+ int chip_id, vasid, ret = 0;
+ int ct_842 = 0, ct_gzip = 0;
+ struct device_node *dn;
+
+ chip_id = of_get_ibm_chip_id(pn);
+ if (chip_id < 0) {
+ pr_err("ibm,chip-id missing\n");
+ return -EINVAL;
+ }
+
+ vasid = chip_to_vas_id(chip_id);
+ if (vasid < 0) {
+ pr_err("Unable to map chip_id %d to vasid\n", chip_id);
+ return -EINVAL;
+ }
+
+ for_each_child_of_node(pn, dn) {
+ ret = find_nx_device_tree(dn, chip_id, vasid, NX_CT_842,
+ "ibm,p9-nx-842", &ct_842);
+
+ if (!ret)
+ ret = find_nx_device_tree(dn, chip_id, vasid,
+ NX_CT_GZIP, "ibm,p9-nx-gzip", &ct_gzip);
+
+ if (ret) {
+ of_node_put(dn);
+ return ret;
+ }
+ }
+
+ if (!ct_842 || !ct_gzip) {
+ pr_err("NX FIFO nodes are missing\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Initialize NX instance for both high and normal priority FIFOs.
+ */
+ ret = nx_coproc_init(chip_id, ct_842, ct_gzip);
+
+ return ret;
+}
+
+static int __init nx842_powernv_probe(struct device_node *dn)
+{
+ struct nx_coproc *coproc;
+ unsigned int ct, ci;
+ int chip_id;
+
+ chip_id = of_get_ibm_chip_id(dn);
+ if (chip_id < 0) {
+ pr_err("ibm,chip-id missing\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(dn, "ibm,842-coprocessor-type", &ct)) {
+ pr_err("ibm,842-coprocessor-type missing\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(dn, "ibm,842-coprocessor-instance", &ci)) {
+ pr_err("ibm,842-coprocessor-instance missing\n");
+ return -EINVAL;
+ }
+
+ coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
+ if (!coproc)
+ return -ENOMEM;
+
+ coproc->ct = ct;
+ coproc->ci = ci;
+ nx_add_coprocs_list(coproc, chip_id);
+
+ pr_info("coprocessor found on chip %d, CT %d CI %d\n", chip_id, ct, ci);
+
+ if (!nx842_ct)
+ nx842_ct = ct;
+ else if (nx842_ct != ct)
+ pr_err("NX842 chip %d, CT %d != first found CT %d\n",
+ chip_id, ct, nx842_ct);
+
+ return 0;
+}
+
+static void nx_delete_coprocs(void)
+{
+ struct nx_coproc *coproc, *n;
+ struct vas_window *txwin;
+ int i;
+
+ /*
+ * close percpu txwins that are opened for the corresponding coproc.
+ */
+ for_each_possible_cpu(i) {
+ txwin = per_cpu(cpu_txwin, i);
+ if (txwin)
+ vas_win_close(txwin);
+
+ per_cpu(cpu_txwin, i) = NULL;
+ }
+
+ list_for_each_entry_safe(coproc, n, &nx_coprocs, list) {
+ if (coproc->vas.rxwin)
+ vas_win_close(coproc->vas.rxwin);
+
+ list_del(&coproc->list);
+ kfree(coproc);
+ }
+}
+
+static struct nx842_constraints nx842_powernv_constraints = {
+ .alignment = DDE_BUFFER_ALIGN,
+ .multiple = DDE_BUFFER_LAST_MULT,
+ .minimum = DDE_BUFFER_LAST_MULT,
+ .maximum = (DDL_LEN_MAX - 1) * PAGE_SIZE,
+};
+
+static struct nx842_driver nx842_powernv_driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .workmem_size = sizeof(struct nx842_workmem),
+ .constraints = &nx842_powernv_constraints,
+ .compress = nx842_powernv_compress,
+ .decompress = nx842_powernv_decompress,
+};
+
+static int nx842_powernv_crypto_init(struct crypto_tfm *tfm)
+{
+ return nx842_crypto_init(tfm, &nx842_powernv_driver);
+}
+
+static struct crypto_alg nx842_powernv_alg = {
+ .cra_name = "842",
+ .cra_driver_name = "842-nx",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
+ .cra_ctxsize = sizeof(struct nx842_crypto_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = nx842_powernv_crypto_init,
+ .cra_exit = nx842_crypto_exit,
+ .cra_u = { .compress = {
+ .coa_compress = nx842_crypto_compress,
+ .coa_decompress = nx842_crypto_decompress } }
+};
+
+static __init int nx_compress_powernv_init(void)
+{
+ struct device_node *dn;
+ int ret;
+
+ /* verify workmem size/align restrictions */
+ BUILD_BUG_ON(WORKMEM_ALIGN % CRB_ALIGN);
+ BUILD_BUG_ON(CRB_ALIGN % DDE_ALIGN);
+ BUILD_BUG_ON(CRB_SIZE % DDE_ALIGN);
+ /* verify buffer size/align restrictions */
+ BUILD_BUG_ON(PAGE_SIZE % DDE_BUFFER_ALIGN);
+ BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT);
+ BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT);
+
+ for_each_compatible_node(dn, NULL, "ibm,power9-nx") {
+ ret = nx_powernv_probe_vas(dn);
+ if (ret) {
+ nx_delete_coprocs();
+ of_node_put(dn);
+ return ret;
+ }
+ }
+
+ if (list_empty(&nx_coprocs)) {
+ for_each_compatible_node(dn, NULL, "ibm,power-nx")
+ nx842_powernv_probe(dn);
+
+ if (!nx842_ct)
+ return -ENODEV;
+
+ nx842_powernv_exec = nx842_exec_icswx;
+ } else {
+ /*
+ * Register VAS user space API for NX GZIP so
+ * that user space can use GZIP engine.
+ * Using high FIFO priority for kernel requests and
+ * normal FIFO priority is assigned for userspace.
+ * 842 compression is supported only in kernel.
+ */
+ ret = vas_register_api_powernv(THIS_MODULE, VAS_COP_TYPE_GZIP,
+ "nx-gzip");
+
+ /*
+ * GZIP is not supported in kernel right now.
+ * So open tx windows only for 842.
+ */
+ if (!ret)
+ ret = nx_open_percpu_txwins();
+
+ if (ret) {
+ nx_delete_coprocs();
+ return ret;
+ }
+
+ nx842_powernv_exec = nx842_exec_vas;
+ }
+
+ ret = crypto_register_alg(&nx842_powernv_alg);
+ if (ret) {
+ nx_delete_coprocs();
+ return ret;
+ }
+
+ return 0;
+}
+module_init(nx_compress_powernv_init);
+
+static void __exit nx_compress_powernv_exit(void)
+{
+ /*
+ * GZIP engine is supported only in power9 or later and nx842_ct
+ * is used on power8 (icswx).
+ * VAS API for NX GZIP is registered during init for user space
+ * use. So delete this API use for GZIP engine.
+ */
+ if (!nx842_ct)
+ vas_unregister_api_powernv();
+
+ crypto_unregister_alg(&nx842_powernv_alg);
+
+ nx_delete_coprocs();
+}
+module_exit(nx_compress_powernv_exit);