diff options
Diffstat (limited to 'drivers/gpu/drm/display/drm_dp_helper.c')
| -rw-r--r-- | drivers/gpu/drm/display/drm_dp_helper.c | 169 |
1 files changed, 168 insertions, 1 deletions
diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c index f3680f4e6..26c188ce5 100644 --- a/drivers/gpu/drm/display/drm_dp_helper.c +++ b/drivers/gpu/drm/display/drm_dp_helper.c @@ -2102,7 +2102,6 @@ int drm_dp_aux_register(struct drm_dp_aux *aux) if (!aux->ddc.algo) drm_dp_aux_init(aux); - aux->ddc.class = I2C_CLASS_DDC; aux->ddc.owner = THIS_MODULE; aux->ddc.dev.parent = aux->dev; @@ -2245,6 +2244,8 @@ static const struct dpcd_quirk dpcd_quirk_list[] = { { OUI(0x00, 0x00, 0x00), DEVICE_ID('C', 'H', '7', '5', '1', '1'), false, BIT(DP_DPCD_QUIRK_NO_SINK_COUNT) }, /* Synaptics DP1.4 MST hubs can support DSC without virtual DPCD */ { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) }, + /* Synaptics DP1.4 MST hubs require DSC for some modes on which it applies HBLANK expansion. */ + { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) }, /* Apple MacBookPro 2017 15 inch eDP Retina panel reports too low DP_MAX_LINK_RATE */ { OUI(0x00, 0x10, 0xfa), DEVICE_ID(101, 68, 21, 101, 98, 97), false, BIT(DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS) }, }; @@ -2327,6 +2328,33 @@ int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, EXPORT_SYMBOL(drm_dp_read_desc); /** + * drm_dp_dsc_sink_bpp_incr() - Get bits per pixel increment + * @dsc_dpcd: DSC capabilities from DPCD + * + * Returns the bpp precision supported by the DP sink. + */ +u8 drm_dp_dsc_sink_bpp_incr(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + u8 bpp_increment_dpcd = dsc_dpcd[DP_DSC_BITS_PER_PIXEL_INC - DP_DSC_SUPPORT]; + + switch (bpp_increment_dpcd) { + case DP_DSC_BITS_PER_PIXEL_1_16: + return 16; + case DP_DSC_BITS_PER_PIXEL_1_8: + return 8; + case DP_DSC_BITS_PER_PIXEL_1_4: + return 4; + case DP_DSC_BITS_PER_PIXEL_1_2: + return 2; + case DP_DSC_BITS_PER_PIXEL_1_1: + return 1; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_dsc_sink_bpp_incr); + +/** * drm_dp_dsc_sink_max_slice_count() - Get the max slice count * supported by the DSC sink. * @dsc_dpcd: DSC capabilities from DPCD @@ -3898,3 +3926,142 @@ int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux) EXPORT_SYMBOL(drm_panel_dp_aux_backlight); #endif + +/* See DP Standard v2.1 2.6.4.4.1.1, 2.8.4.4, 2.8.7 */ +static int drm_dp_link_symbol_cycles(int lane_count, int pixels, int bpp_x16, + int symbol_size, bool is_mst) +{ + int cycles = DIV_ROUND_UP(pixels * bpp_x16, 16 * symbol_size * lane_count); + int align = is_mst ? 4 / lane_count : 1; + + return ALIGN(cycles, align); +} + +static int drm_dp_link_dsc_symbol_cycles(int lane_count, int pixels, int slice_count, + int bpp_x16, int symbol_size, bool is_mst) +{ + int slice_pixels = DIV_ROUND_UP(pixels, slice_count); + int slice_data_cycles = drm_dp_link_symbol_cycles(lane_count, slice_pixels, + bpp_x16, symbol_size, is_mst); + int slice_eoc_cycles = is_mst ? 4 / lane_count : 1; + + return slice_count * (slice_data_cycles + slice_eoc_cycles); +} + +/** + * drm_dp_bw_overhead - Calculate the BW overhead of a DP link stream + * @lane_count: DP link lane count + * @hactive: pixel count of the active period in one scanline of the stream + * @dsc_slice_count: DSC slice count if @flags/DRM_DP_LINK_BW_OVERHEAD_DSC is set + * @bpp_x16: bits per pixel in .4 binary fixed point + * @flags: DRM_DP_OVERHEAD_x flags + * + * Calculate the BW allocation overhead of a DP link stream, depending + * on the link's + * - @lane_count + * - SST/MST mode (@flags / %DRM_DP_OVERHEAD_MST) + * - symbol size (@flags / %DRM_DP_OVERHEAD_UHBR) + * - FEC mode (@flags / %DRM_DP_OVERHEAD_FEC) + * - SSC/REF_CLK mode (@flags / %DRM_DP_OVERHEAD_SSC_REF_CLK) + * as well as the stream's + * - @hactive timing + * - @bpp_x16 color depth + * - compression mode (@flags / %DRM_DP_OVERHEAD_DSC). + * Note that this overhead doesn't account for the 8b/10b, 128b/132b + * channel coding efficiency, for that see + * @drm_dp_link_bw_channel_coding_efficiency(). + * + * Returns the overhead as 100% + overhead% in 1ppm units. + */ +int drm_dp_bw_overhead(int lane_count, int hactive, + int dsc_slice_count, + int bpp_x16, unsigned long flags) +{ + int symbol_size = flags & DRM_DP_BW_OVERHEAD_UHBR ? 32 : 8; + bool is_mst = flags & DRM_DP_BW_OVERHEAD_MST; + u32 overhead = 1000000; + int symbol_cycles; + + if (lane_count == 0 || hactive == 0 || bpp_x16 == 0) { + DRM_DEBUG_KMS("Invalid BW overhead params: lane_count %d, hactive %d, bpp_x16 %d.%04d\n", + lane_count, hactive, + bpp_x16 >> 4, (bpp_x16 & 0xf) * 625); + return 0; + } + + /* + * DP Standard v2.1 2.6.4.1 + * SSC downspread and ref clock variation margin: + * 5300ppm + 300ppm ~ 0.6% + */ + if (flags & DRM_DP_BW_OVERHEAD_SSC_REF_CLK) + overhead += 6000; + + /* + * DP Standard v2.1 2.6.4.1.1, 3.5.1.5.4: + * FEC symbol insertions for 8b/10b channel coding: + * After each 250 data symbols on 2-4 lanes: + * 250 LL + 5 FEC_PARITY_PH + 1 CD_ADJ (256 byte FEC block) + * After each 2 x 250 data symbols on 1 lane: + * 2 * 250 LL + 11 FEC_PARITY_PH + 1 CD_ADJ (512 byte FEC block) + * After 256 (2-4 lanes) or 128 (1 lane) FEC blocks: + * 256 * 256 bytes + 1 FEC_PM + * or + * 128 * 512 bytes + 1 FEC_PM + * (256 * 6 + 1) / (256 * 250) = 2.4015625 % + */ + if (flags & DRM_DP_BW_OVERHEAD_FEC) + overhead += 24016; + + /* + * DP Standard v2.1 2.7.9, 5.9.7 + * The FEC overhead for UHBR is accounted for in its 96.71% channel + * coding efficiency. + */ + WARN_ON((flags & DRM_DP_BW_OVERHEAD_UHBR) && + (flags & DRM_DP_BW_OVERHEAD_FEC)); + + if (flags & DRM_DP_BW_OVERHEAD_DSC) + symbol_cycles = drm_dp_link_dsc_symbol_cycles(lane_count, hactive, + dsc_slice_count, + bpp_x16, symbol_size, + is_mst); + else + symbol_cycles = drm_dp_link_symbol_cycles(lane_count, hactive, + bpp_x16, symbol_size, + is_mst); + + return DIV_ROUND_UP_ULL(mul_u32_u32(symbol_cycles * symbol_size * lane_count, + overhead * 16), + hactive * bpp_x16); +} +EXPORT_SYMBOL(drm_dp_bw_overhead); + +/** + * drm_dp_bw_channel_coding_efficiency - Get a DP link's channel coding efficiency + * @is_uhbr: Whether the link has a 128b/132b channel coding + * + * Return the channel coding efficiency of the given DP link type, which is + * either 8b/10b or 128b/132b (aka UHBR). The corresponding overhead includes + * the 8b -> 10b, 128b -> 132b pixel data to link symbol conversion overhead + * and for 128b/132b any link or PHY level control symbol insertion overhead + * (LLCP, FEC, PHY sync, see DP Standard v2.1 3.5.2.18). For 8b/10b the + * corresponding FEC overhead is BW allocation specific, included in the value + * returned by drm_dp_bw_overhead(). + * + * Returns the efficiency in the 100%/coding-overhead% ratio in + * 1ppm units. + */ +int drm_dp_bw_channel_coding_efficiency(bool is_uhbr) +{ + if (is_uhbr) + return 967100; + else + /* + * Note that on 8b/10b MST the efficiency is only + * 78.75% due to the 1 out of 64 MTPH packet overhead, + * not accounted for here. + */ + return 800000; +} +EXPORT_SYMBOL(drm_dp_bw_channel_coding_efficiency); |