diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_dpll.c')
-rw-r--r-- | drivers/gpu/drm/i915/display/intel_dpll.c | 2094 |
1 files changed, 2094 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_dpll.c b/drivers/gpu/drm/i915/display/intel_dpll.c new file mode 100644 index 0000000000..999badfe29 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_dpll.c @@ -0,0 +1,2094 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2020 Intel Corporation + */ + +#include <linux/kernel.h> +#include <linux/string_helpers.h> + +#include "i915_reg.h" +#include "intel_crtc.h" +#include "intel_cx0_phy.h" +#include "intel_de.h" +#include "intel_display.h" +#include "intel_display_types.h" +#include "intel_dpio_phy.h" +#include "intel_dpll.h" +#include "intel_lvds.h" +#include "intel_panel.h" +#include "intel_pps.h" +#include "intel_snps_phy.h" +#include "vlv_sideband.h" + +struct intel_dpll_funcs { + int (*crtc_compute_clock)(struct intel_atomic_state *state, + struct intel_crtc *crtc); + int (*crtc_get_shared_dpll)(struct intel_atomic_state *state, + struct intel_crtc *crtc); +}; + +struct intel_limit { + struct { + int min, max; + } dot, vco, n, m, m1, m2, p, p1; + + struct { + int dot_limit; + int p2_slow, p2_fast; + } p2; +}; +static const struct intel_limit intel_limits_i8xx_dac = { + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 908000, .max = 1512000 }, + .n = { .min = 2, .max = 16 }, + .m = { .min = 96, .max = 140 }, + .m1 = { .min = 18, .max = 26 }, + .m2 = { .min = 6, .max = 16 }, + .p = { .min = 4, .max = 128 }, + .p1 = { .min = 2, .max = 33 }, + .p2 = { .dot_limit = 165000, + .p2_slow = 4, .p2_fast = 2 }, +}; + +static const struct intel_limit intel_limits_i8xx_dvo = { + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 908000, .max = 1512000 }, + .n = { .min = 2, .max = 16 }, + .m = { .min = 96, .max = 140 }, + .m1 = { .min = 18, .max = 26 }, + .m2 = { .min = 6, .max = 16 }, + .p = { .min = 4, .max = 128 }, + .p1 = { .min = 2, .max = 33 }, + .p2 = { .dot_limit = 165000, + .p2_slow = 4, .p2_fast = 4 }, +}; + +static const struct intel_limit intel_limits_i8xx_lvds = { + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 908000, .max = 1512000 }, + .n = { .min = 2, .max = 16 }, + .m = { .min = 96, .max = 140 }, + .m1 = { .min = 18, .max = 26 }, + .m2 = { .min = 6, .max = 16 }, + .p = { .min = 4, .max = 128 }, + .p1 = { .min = 1, .max = 6 }, + .p2 = { .dot_limit = 165000, + .p2_slow = 14, .p2_fast = 7 }, +}; + +static const struct intel_limit intel_limits_i9xx_sdvo = { + .dot = { .min = 20000, .max = 400000 }, + .vco = { .min = 1400000, .max = 2800000 }, + .n = { .min = 1, .max = 6 }, + .m = { .min = 70, .max = 120 }, + .m1 = { .min = 8, .max = 18 }, + .m2 = { .min = 3, .max = 7 }, + .p = { .min = 5, .max = 80 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 200000, + .p2_slow = 10, .p2_fast = 5 }, +}; + +static const struct intel_limit intel_limits_i9xx_lvds = { + .dot = { .min = 20000, .max = 400000 }, + .vco = { .min = 1400000, .max = 2800000 }, + .n = { .min = 1, .max = 6 }, + .m = { .min = 70, .max = 120 }, + .m1 = { .min = 8, .max = 18 }, + .m2 = { .min = 3, .max = 7 }, + .p = { .min = 7, .max = 98 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 112000, + .p2_slow = 14, .p2_fast = 7 }, +}; + + +static const struct intel_limit intel_limits_g4x_sdvo = { + .dot = { .min = 25000, .max = 270000 }, + .vco = { .min = 1750000, .max = 3500000}, + .n = { .min = 1, .max = 4 }, + .m = { .min = 104, .max = 138 }, + .m1 = { .min = 17, .max = 23 }, + .m2 = { .min = 5, .max = 11 }, + .p = { .min = 10, .max = 30 }, + .p1 = { .min = 1, .max = 3}, + .p2 = { .dot_limit = 270000, + .p2_slow = 10, + .p2_fast = 10 + }, +}; + +static const struct intel_limit intel_limits_g4x_hdmi = { + .dot = { .min = 22000, .max = 400000 }, + .vco = { .min = 1750000, .max = 3500000}, + .n = { .min = 1, .max = 4 }, + .m = { .min = 104, .max = 138 }, + .m1 = { .min = 16, .max = 23 }, + .m2 = { .min = 5, .max = 11 }, + .p = { .min = 5, .max = 80 }, + .p1 = { .min = 1, .max = 8}, + .p2 = { .dot_limit = 165000, + .p2_slow = 10, .p2_fast = 5 }, +}; + +static const struct intel_limit intel_limits_g4x_single_channel_lvds = { + .dot = { .min = 20000, .max = 115000 }, + .vco = { .min = 1750000, .max = 3500000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 104, .max = 138 }, + .m1 = { .min = 17, .max = 23 }, + .m2 = { .min = 5, .max = 11 }, + .p = { .min = 28, .max = 112 }, + .p1 = { .min = 2, .max = 8 }, + .p2 = { .dot_limit = 0, + .p2_slow = 14, .p2_fast = 14 + }, +}; + +static const struct intel_limit intel_limits_g4x_dual_channel_lvds = { + .dot = { .min = 80000, .max = 224000 }, + .vco = { .min = 1750000, .max = 3500000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 104, .max = 138 }, + .m1 = { .min = 17, .max = 23 }, + .m2 = { .min = 5, .max = 11 }, + .p = { .min = 14, .max = 42 }, + .p1 = { .min = 2, .max = 6 }, + .p2 = { .dot_limit = 0, + .p2_slow = 7, .p2_fast = 7 + }, +}; + +static const struct intel_limit pnv_limits_sdvo = { + .dot = { .min = 20000, .max = 400000}, + .vco = { .min = 1700000, .max = 3500000 }, + /* Pineview's Ncounter is a ring counter */ + .n = { .min = 3, .max = 6 }, + .m = { .min = 2, .max = 256 }, + /* Pineview only has one combined m divider, which we treat as m2. */ + .m1 = { .min = 0, .max = 0 }, + .m2 = { .min = 0, .max = 254 }, + .p = { .min = 5, .max = 80 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 200000, + .p2_slow = 10, .p2_fast = 5 }, +}; + +static const struct intel_limit pnv_limits_lvds = { + .dot = { .min = 20000, .max = 400000 }, + .vco = { .min = 1700000, .max = 3500000 }, + .n = { .min = 3, .max = 6 }, + .m = { .min = 2, .max = 256 }, + .m1 = { .min = 0, .max = 0 }, + .m2 = { .min = 0, .max = 254 }, + .p = { .min = 7, .max = 112 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 112000, + .p2_slow = 14, .p2_fast = 14 }, +}; + +/* Ironlake / Sandybridge + * + * We calculate clock using (register_value + 2) for N/M1/M2, so here + * the range value for them is (actual_value - 2). + */ +static const struct intel_limit ilk_limits_dac = { + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 5 }, + .m = { .min = 79, .max = 127 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 5, .max = 80 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 10, .p2_fast = 5 }, +}; + +static const struct intel_limit ilk_limits_single_lvds = { + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 79, .max = 118 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 28, .max = 112 }, + .p1 = { .min = 2, .max = 8 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 14, .p2_fast = 14 }, +}; + +static const struct intel_limit ilk_limits_dual_lvds = { + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 79, .max = 127 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 14, .max = 56 }, + .p1 = { .min = 2, .max = 8 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 7, .p2_fast = 7 }, +}; + +/* LVDS 100mhz refclk limits. */ +static const struct intel_limit ilk_limits_single_lvds_100m = { + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 2 }, + .m = { .min = 79, .max = 126 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 28, .max = 112 }, + .p1 = { .min = 2, .max = 8 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 14, .p2_fast = 14 }, +}; + +static const struct intel_limit ilk_limits_dual_lvds_100m = { + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 79, .max = 126 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 14, .max = 42 }, + .p1 = { .min = 2, .max = 6 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 7, .p2_fast = 7 }, +}; + +static const struct intel_limit intel_limits_vlv = { + /* + * These are based on the data rate limits (measured in fast clocks) + * since those are the strictest limits we have. The fast + * clock and actual rate limits are more relaxed, so checking + * them would make no difference. + */ + .dot = { .min = 25000, .max = 270000 }, + .vco = { .min = 4000000, .max = 6000000 }, + .n = { .min = 1, .max = 7 }, + .m1 = { .min = 2, .max = 3 }, + .m2 = { .min = 11, .max = 156 }, + .p1 = { .min = 2, .max = 3 }, + .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */ +}; + +static const struct intel_limit intel_limits_chv = { + /* + * These are based on the data rate limits (measured in fast clocks) + * since those are the strictest limits we have. The fast + * clock and actual rate limits are more relaxed, so checking + * them would make no difference. + */ + .dot = { .min = 25000, .max = 540000 }, + .vco = { .min = 4800000, .max = 6480000 }, + .n = { .min = 1, .max = 1 }, + .m1 = { .min = 2, .max = 2 }, + .m2 = { .min = 24 << 22, .max = 175 << 22 }, + .p1 = { .min = 2, .max = 4 }, + .p2 = { .p2_slow = 1, .p2_fast = 14 }, +}; + +static const struct intel_limit intel_limits_bxt = { + .dot = { .min = 25000, .max = 594000 }, + .vco = { .min = 4800000, .max = 6700000 }, + .n = { .min = 1, .max = 1 }, + .m1 = { .min = 2, .max = 2 }, + /* FIXME: find real m2 limits */ + .m2 = { .min = 2 << 22, .max = 255 << 22 }, + .p1 = { .min = 2, .max = 4 }, + .p2 = { .p2_slow = 1, .p2_fast = 20 }, +}; + +/* + * Platform specific helpers to calculate the port PLL loopback- (clock.m), + * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast + * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic. + * The helpers' return value is the rate of the clock that is fed to the + * display engine's pipe which can be the above fast dot clock rate or a + * divided-down version of it. + */ +/* m1 is reserved as 0 in Pineview, n is a ring counter */ +int pnv_calc_dpll_params(int refclk, struct dpll *clock) +{ + clock->m = clock->m2 + 2; + clock->p = clock->p1 * clock->p2; + if (WARN_ON(clock->n == 0 || clock->p == 0)) + return 0; + clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); + clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); + + return clock->dot; +} + +static u32 i9xx_dpll_compute_m(const struct dpll *dpll) +{ + return 5 * (dpll->m1 + 2) + (dpll->m2 + 2); +} + +int i9xx_calc_dpll_params(int refclk, struct dpll *clock) +{ + clock->m = i9xx_dpll_compute_m(clock); + clock->p = clock->p1 * clock->p2; + if (WARN_ON(clock->n + 2 == 0 || clock->p == 0)) + return 0; + clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2); + clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); + + return clock->dot; +} + +int vlv_calc_dpll_params(int refclk, struct dpll *clock) +{ + clock->m = clock->m1 * clock->m2; + clock->p = clock->p1 * clock->p2 * 5; + if (WARN_ON(clock->n == 0 || clock->p == 0)) + return 0; + clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); + clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); + + return clock->dot; +} + +int chv_calc_dpll_params(int refclk, struct dpll *clock) +{ + clock->m = clock->m1 * clock->m2; + clock->p = clock->p1 * clock->p2 * 5; + if (WARN_ON(clock->n == 0 || clock->p == 0)) + return 0; + clock->vco = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, clock->m), + clock->n << 22); + clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); + + return clock->dot; +} + +/* + * Returns whether the given set of divisors are valid for a given refclk with + * the given connectors. + */ +static bool intel_pll_is_valid(struct drm_i915_private *dev_priv, + const struct intel_limit *limit, + const struct dpll *clock) +{ + if (clock->n < limit->n.min || limit->n.max < clock->n) + return false; + if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) + return false; + if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) + return false; + if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) + return false; + + if (!IS_PINEVIEW(dev_priv) && !IS_LP(dev_priv)) + if (clock->m1 <= clock->m2) + return false; + + if (!IS_LP(dev_priv)) { + if (clock->p < limit->p.min || limit->p.max < clock->p) + return false; + if (clock->m < limit->m.min || limit->m.max < clock->m) + return false; + } + + if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) + return false; + /* XXX: We may need to be checking "Dot clock" depending on the multiplier, + * connector, etc., rather than just a single range. + */ + if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) + return false; + + return true; +} + +static int +i9xx_select_p2_div(const struct intel_limit *limit, + const struct intel_crtc_state *crtc_state, + int target) +{ + struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { + /* + * For LVDS just rely on its current settings for dual-channel. + * We haven't figured out how to reliably set up different + * single/dual channel state, if we even can. + */ + if (intel_is_dual_link_lvds(dev_priv)) + return limit->p2.p2_fast; + else + return limit->p2.p2_slow; + } else { + if (target < limit->p2.dot_limit) + return limit->p2.p2_slow; + else + return limit->p2.p2_fast; + } +} + +/* + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. + * + * Target and reference clocks are specified in kHz. + * + * If match_clock is provided, then best_clock P divider must match the P + * divider from @match_clock used for LVDS downclocking. + */ +static bool +i9xx_find_best_dpll(const struct intel_limit *limit, + struct intel_crtc_state *crtc_state, + int target, int refclk, + const struct dpll *match_clock, + struct dpll *best_clock) +{ + struct drm_device *dev = crtc_state->uapi.crtc->dev; + struct dpll clock; + int err = target; + + memset(best_clock, 0, sizeof(*best_clock)); + + clock.p2 = i9xx_select_p2_div(limit, crtc_state, target); + + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; + clock.m1++) { + for (clock.m2 = limit->m2.min; + clock.m2 <= limit->m2.max; clock.m2++) { + if (clock.m2 >= clock.m1) + break; + for (clock.n = limit->n.min; + clock.n <= limit->n.max; clock.n++) { + for (clock.p1 = limit->p1.min; + clock.p1 <= limit->p1.max; clock.p1++) { + int this_err; + + i9xx_calc_dpll_params(refclk, &clock); + if (!intel_pll_is_valid(to_i915(dev), + limit, + &clock)) + continue; + if (match_clock && + clock.p != match_clock->p) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + } + } + + return (err != target); +} + +/* + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. + * + * Target and reference clocks are specified in kHz. + * + * If match_clock is provided, then best_clock P divider must match the P + * divider from @match_clock used for LVDS downclocking. + */ +static bool +pnv_find_best_dpll(const struct intel_limit *limit, + struct intel_crtc_state *crtc_state, + int target, int refclk, + const struct dpll *match_clock, + struct dpll *best_clock) +{ + struct drm_device *dev = crtc_state->uapi.crtc->dev; + struct dpll clock; + int err = target; + + memset(best_clock, 0, sizeof(*best_clock)); + + clock.p2 = i9xx_select_p2_div(limit, crtc_state, target); + + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; + clock.m1++) { + for (clock.m2 = limit->m2.min; + clock.m2 <= limit->m2.max; clock.m2++) { + for (clock.n = limit->n.min; + clock.n <= limit->n.max; clock.n++) { + for (clock.p1 = limit->p1.min; + clock.p1 <= limit->p1.max; clock.p1++) { + int this_err; + + pnv_calc_dpll_params(refclk, &clock); + if (!intel_pll_is_valid(to_i915(dev), + limit, + &clock)) + continue; + if (match_clock && + clock.p != match_clock->p) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + } + } + + return (err != target); +} + +/* + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. + * + * Target and reference clocks are specified in kHz. + * + * If match_clock is provided, then best_clock P divider must match the P + * divider from @match_clock used for LVDS downclocking. + */ +static bool +g4x_find_best_dpll(const struct intel_limit *limit, + struct intel_crtc_state *crtc_state, + int target, int refclk, + const struct dpll *match_clock, + struct dpll *best_clock) +{ + struct drm_device *dev = crtc_state->uapi.crtc->dev; + struct dpll clock; + int max_n; + bool found = false; + /* approximately equals target * 0.00585 */ + int err_most = (target >> 8) + (target >> 9); + + memset(best_clock, 0, sizeof(*best_clock)); + + clock.p2 = i9xx_select_p2_div(limit, crtc_state, target); + + max_n = limit->n.max; + /* based on hardware requirement, prefer smaller n to precision */ + for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { + /* based on hardware requirement, prefere larger m1,m2 */ + for (clock.m1 = limit->m1.max; + clock.m1 >= limit->m1.min; clock.m1--) { + for (clock.m2 = limit->m2.max; + clock.m2 >= limit->m2.min; clock.m2--) { + for (clock.p1 = limit->p1.max; + clock.p1 >= limit->p1.min; clock.p1--) { + int this_err; + + i9xx_calc_dpll_params(refclk, &clock); + if (!intel_pll_is_valid(to_i915(dev), + limit, + &clock)) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err_most) { + *best_clock = clock; + err_most = this_err; + max_n = clock.n; + found = true; + } + } + } + } + } + return found; +} + +/* + * Check if the calculated PLL configuration is more optimal compared to the + * best configuration and error found so far. Return the calculated error. + */ +static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq, + const struct dpll *calculated_clock, + const struct dpll *best_clock, + unsigned int best_error_ppm, + unsigned int *error_ppm) +{ + /* + * For CHV ignore the error and consider only the P value. + * Prefer a bigger P value based on HW requirements. + */ + if (IS_CHERRYVIEW(to_i915(dev))) { + *error_ppm = 0; + + return calculated_clock->p > best_clock->p; + } + + if (drm_WARN_ON_ONCE(dev, !target_freq)) + return false; + + *error_ppm = div_u64(1000000ULL * + abs(target_freq - calculated_clock->dot), + target_freq); + /* + * Prefer a better P value over a better (smaller) error if the error + * is small. Ensure this preference for future configurations too by + * setting the error to 0. + */ + if (*error_ppm < 100 && calculated_clock->p > best_clock->p) { + *error_ppm = 0; + + return true; + } + + return *error_ppm + 10 < best_error_ppm; +} + +/* + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. + */ +static bool +vlv_find_best_dpll(const struct intel_limit *limit, + struct intel_crtc_state *crtc_state, + int target, int refclk, + const struct dpll *match_clock, + struct dpll *best_clock) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_device *dev = crtc->base.dev; + struct dpll clock; + unsigned int bestppm = 1000000; + /* min update 19.2 MHz */ + int max_n = min(limit->n.max, refclk / 19200); + bool found = false; + + memset(best_clock, 0, sizeof(*best_clock)); + + /* based on hardware requirement, prefer smaller n to precision */ + for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { + for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { + for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow; + clock.p2 -= clock.p2 > 10 ? 2 : 1) { + clock.p = clock.p1 * clock.p2 * 5; + /* based on hardware requirement, prefer bigger m1,m2 values */ + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { + unsigned int ppm; + + clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n, + refclk * clock.m1); + + vlv_calc_dpll_params(refclk, &clock); + + if (!intel_pll_is_valid(to_i915(dev), + limit, + &clock)) + continue; + + if (!vlv_PLL_is_optimal(dev, target, + &clock, + best_clock, + bestppm, &ppm)) + continue; + + *best_clock = clock; + bestppm = ppm; + found = true; + } + } + } + } + + return found; +} + +/* + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. + */ +static bool +chv_find_best_dpll(const struct intel_limit *limit, + struct intel_crtc_state *crtc_state, + int target, int refclk, + const struct dpll *match_clock, + struct dpll *best_clock) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_device *dev = crtc->base.dev; + unsigned int best_error_ppm; + struct dpll clock; + u64 m2; + int found = false; + + memset(best_clock, 0, sizeof(*best_clock)); + best_error_ppm = 1000000; + + /* + * Based on hardware doc, the n always set to 1, and m1 always + * set to 2. If requires to support 200Mhz refclk, we need to + * revisit this because n may not 1 anymore. + */ + clock.n = 1; + clock.m1 = 2; + + for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { + for (clock.p2 = limit->p2.p2_fast; + clock.p2 >= limit->p2.p2_slow; + clock.p2 -= clock.p2 > 10 ? 2 : 1) { + unsigned int error_ppm; + + clock.p = clock.p1 * clock.p2 * 5; + + m2 = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(target, clock.p * clock.n) << 22, + refclk * clock.m1); + + if (m2 > INT_MAX/clock.m1) + continue; + + clock.m2 = m2; + + chv_calc_dpll_params(refclk, &clock); + + if (!intel_pll_is_valid(to_i915(dev), limit, &clock)) + continue; + + if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock, + best_error_ppm, &error_ppm)) + continue; + + *best_clock = clock; + best_error_ppm = error_ppm; + found = true; + } + } + + return found; +} + +bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, + struct dpll *best_clock) +{ + const struct intel_limit *limit = &intel_limits_bxt; + int refclk = 100000; + + return chv_find_best_dpll(limit, crtc_state, + crtc_state->port_clock, refclk, + NULL, best_clock); +} + +u32 i9xx_dpll_compute_fp(const struct dpll *dpll) +{ + return dpll->n << 16 | dpll->m1 << 8 | dpll->m2; +} + +static u32 pnv_dpll_compute_fp(const struct dpll *dpll) +{ + return (1 << dpll->n) << 16 | dpll->m2; +} + +static void i9xx_update_pll_dividers(struct intel_crtc_state *crtc_state, + const struct dpll *clock, + const struct dpll *reduced_clock) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + u32 fp, fp2; + + if (IS_PINEVIEW(dev_priv)) { + fp = pnv_dpll_compute_fp(clock); + fp2 = pnv_dpll_compute_fp(reduced_clock); + } else { + fp = i9xx_dpll_compute_fp(clock); + fp2 = i9xx_dpll_compute_fp(reduced_clock); + } + + crtc_state->dpll_hw_state.fp0 = fp; + crtc_state->dpll_hw_state.fp1 = fp2; +} + +static void i9xx_compute_dpll(struct intel_crtc_state *crtc_state, + const struct dpll *clock, + const struct dpll *reduced_clock) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + u32 dpll; + + i9xx_update_pll_dividers(crtc_state, clock, reduced_clock); + + dpll = DPLL_VGA_MODE_DIS; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + + if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) || + IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) { + dpll |= (crtc_state->pixel_multiplier - 1) + << SDVO_MULTIPLIER_SHIFT_HIRES; + } + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) || + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) + dpll |= DPLL_SDVO_HIGH_SPEED; + + if (intel_crtc_has_dp_encoder(crtc_state)) + dpll |= DPLL_SDVO_HIGH_SPEED; + + /* compute bitmask from p1 value */ + if (IS_G4X(dev_priv)) { + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; + } else if (IS_PINEVIEW(dev_priv)) { + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; + WARN_ON(reduced_clock->p1 != clock->p1); + } else { + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + WARN_ON(reduced_clock->p1 != clock->p1); + } + + switch (clock->p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + WARN_ON(reduced_clock->p2 != clock->p2); + + if (DISPLAY_VER(dev_priv) >= 4) + dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); + + if (crtc_state->sdvo_tv_clock) + dpll |= PLL_REF_INPUT_TVCLKINBC; + else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) && + intel_panel_use_ssc(dev_priv)) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + else + dpll |= PLL_REF_INPUT_DREFCLK; + + dpll |= DPLL_VCO_ENABLE; + crtc_state->dpll_hw_state.dpll = dpll; + + if (DISPLAY_VER(dev_priv) >= 4) { + u32 dpll_md = (crtc_state->pixel_multiplier - 1) + << DPLL_MD_UDI_MULTIPLIER_SHIFT; + crtc_state->dpll_hw_state.dpll_md = dpll_md; + } +} + +static void i8xx_compute_dpll(struct intel_crtc_state *crtc_state, + const struct dpll *clock, + const struct dpll *reduced_clock) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + u32 dpll; + + i9xx_update_pll_dividers(crtc_state, clock, reduced_clock); + + dpll = DPLL_VGA_MODE_DIS; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + } else { + if (clock->p1 == 2) + dpll |= PLL_P1_DIVIDE_BY_TWO; + else + dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; + if (clock->p2 == 4) + dpll |= PLL_P2_DIVIDE_BY_4; + } + WARN_ON(reduced_clock->p1 != clock->p1); + WARN_ON(reduced_clock->p2 != clock->p2); + + /* + * Bspec: + * "[Almador Errata}: For the correct operation of the muxed DVO pins + * (GDEVSELB/I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data, + * GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock + * Enable) must be set to “1” in both the DPLL A Control Register + * (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)." + * + * For simplicity We simply keep both bits always enabled in + * both DPLLS. The spec says we should disable the DVO 2X clock + * when not needed, but this seems to work fine in practice. + */ + if (IS_I830(dev_priv) || + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) + dpll |= DPLL_DVO_2X_MODE; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) && + intel_panel_use_ssc(dev_priv)) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + else + dpll |= PLL_REF_INPUT_DREFCLK; + + dpll |= DPLL_VCO_ENABLE; + crtc_state->dpll_hw_state.dpll = dpll; +} + +static int hsw_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + struct intel_encoder *encoder = + intel_get_crtc_new_encoder(state, crtc_state); + int ret; + + if (DISPLAY_VER(dev_priv) < 11 && + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) + return 0; + + ret = intel_compute_shared_dplls(state, crtc, encoder); + if (ret) + return ret; + + /* FIXME this is a mess */ + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) + return 0; + + /* CRT dotclock is determined via other means */ + if (!crtc_state->has_pch_encoder) + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return 0; +} + +static int hsw_crtc_get_shared_dpll(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + struct intel_encoder *encoder = + intel_get_crtc_new_encoder(state, crtc_state); + + if (DISPLAY_VER(dev_priv) < 11 && + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) + return 0; + + return intel_reserve_shared_dplls(state, crtc, encoder); +} + +static int dg2_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + struct intel_encoder *encoder = + intel_get_crtc_new_encoder(state, crtc_state); + int ret; + + ret = intel_mpllb_calc_state(crtc_state, encoder); + if (ret) + return ret; + + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return 0; +} + +static int mtl_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *i915 = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + struct intel_encoder *encoder = + intel_get_crtc_new_encoder(state, crtc_state); + enum phy phy = intel_port_to_phy(i915, encoder->port); + int ret; + + ret = intel_cx0pll_calc_state(crtc_state, encoder); + if (ret) + return ret; + + /* TODO: Do the readback via intel_compute_shared_dplls() */ + if (intel_is_c10phy(i915, phy)) + crtc_state->port_clock = intel_c10pll_calc_port_clock(encoder, &crtc_state->cx0pll_state.c10); + else + crtc_state->port_clock = intel_c20pll_calc_port_clock(encoder, &crtc_state->cx0pll_state.c20); + + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return 0; +} + +static bool ilk_needs_fb_cb_tune(const struct dpll *dpll, int factor) +{ + return dpll->m < factor * dpll->n; +} + +static void ilk_update_pll_dividers(struct intel_crtc_state *crtc_state, + const struct dpll *clock, + const struct dpll *reduced_clock) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + u32 fp, fp2; + int factor; + + /* Enable autotuning of the PLL clock (if permissible) */ + factor = 21; + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { + if ((intel_panel_use_ssc(dev_priv) && + dev_priv->display.vbt.lvds_ssc_freq == 100000) || + (HAS_PCH_IBX(dev_priv) && + intel_is_dual_link_lvds(dev_priv))) + factor = 25; + } else if (crtc_state->sdvo_tv_clock) { + factor = 20; + } + + fp = i9xx_dpll_compute_fp(clock); + if (ilk_needs_fb_cb_tune(clock, factor)) + fp |= FP_CB_TUNE; + + fp2 = i9xx_dpll_compute_fp(reduced_clock); + if (ilk_needs_fb_cb_tune(reduced_clock, factor)) + fp2 |= FP_CB_TUNE; + + crtc_state->dpll_hw_state.fp0 = fp; + crtc_state->dpll_hw_state.fp1 = fp2; +} + +static void ilk_compute_dpll(struct intel_crtc_state *crtc_state, + const struct dpll *clock, + const struct dpll *reduced_clock) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + u32 dpll; + + ilk_update_pll_dividers(crtc_state, clock, reduced_clock); + + dpll = 0; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + + dpll |= (crtc_state->pixel_multiplier - 1) + << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) || + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) + dpll |= DPLL_SDVO_HIGH_SPEED; + + if (intel_crtc_has_dp_encoder(crtc_state)) + dpll |= DPLL_SDVO_HIGH_SPEED; + + /* + * The high speed IO clock is only really required for + * SDVO/HDMI/DP, but we also enable it for CRT to make it + * possible to share the DPLL between CRT and HDMI. Enabling + * the clock needlessly does no real harm, except use up a + * bit of power potentially. + * + * We'll limit this to IVB with 3 pipes, since it has only two + * DPLLs and so DPLL sharing is the only way to get three pipes + * driving PCH ports at the same time. On SNB we could do this, + * and potentially avoid enabling the second DPLL, but it's not + * clear if it''s a win or loss power wise. No point in doing + * this on ILK at all since it has a fixed DPLL<->pipe mapping. + */ + if (INTEL_NUM_PIPES(dev_priv) == 3 && + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) + dpll |= DPLL_SDVO_HIGH_SPEED; + + /* compute bitmask from p1 value */ + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + /* also FPA1 */ + dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; + + switch (clock->p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + WARN_ON(reduced_clock->p2 != clock->p2); + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) && + intel_panel_use_ssc(dev_priv)) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + else + dpll |= PLL_REF_INPUT_DREFCLK; + + dpll |= DPLL_VCO_ENABLE; + + crtc_state->dpll_hw_state.dpll = dpll; +} + +static int ilk_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + const struct intel_limit *limit; + int refclk = 120000; + int ret; + + /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */ + if (!crtc_state->has_pch_encoder) + return 0; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { + if (intel_panel_use_ssc(dev_priv)) { + drm_dbg_kms(&dev_priv->drm, + "using SSC reference clock of %d kHz\n", + dev_priv->display.vbt.lvds_ssc_freq); + refclk = dev_priv->display.vbt.lvds_ssc_freq; + } + + if (intel_is_dual_link_lvds(dev_priv)) { + if (refclk == 100000) + limit = &ilk_limits_dual_lvds_100m; + else + limit = &ilk_limits_dual_lvds; + } else { + if (refclk == 100000) + limit = &ilk_limits_single_lvds_100m; + else + limit = &ilk_limits_single_lvds; + } + } else { + limit = &ilk_limits_dac; + } + + if (!crtc_state->clock_set && + !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock, + refclk, NULL, &crtc_state->dpll)) + return -EINVAL; + + ilk_compute_dpll(crtc_state, &crtc_state->dpll, + &crtc_state->dpll); + + ret = intel_compute_shared_dplls(state, crtc, NULL); + if (ret) + return ret; + + crtc_state->port_clock = crtc_state->dpll.dot; + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return ret; +} + +static int ilk_crtc_get_shared_dpll(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + + /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */ + if (!crtc_state->has_pch_encoder) + return 0; + + return intel_reserve_shared_dplls(state, crtc, NULL); +} + +void vlv_compute_dpll(struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + + crtc_state->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV | + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; + if (crtc->pipe != PIPE_A) + crtc_state->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; + + /* DPLL not used with DSI, but still need the rest set up */ + if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) + crtc_state->dpll_hw_state.dpll |= DPLL_VCO_ENABLE | + DPLL_EXT_BUFFER_ENABLE_VLV; + + crtc_state->dpll_hw_state.dpll_md = + (crtc_state->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; +} + +void chv_compute_dpll(struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + + crtc_state->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV | + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; + if (crtc->pipe != PIPE_A) + crtc_state->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; + + /* DPLL not used with DSI, but still need the rest set up */ + if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) + crtc_state->dpll_hw_state.dpll |= DPLL_VCO_ENABLE; + + crtc_state->dpll_hw_state.dpll_md = + (crtc_state->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; +} + +static int chv_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + const struct intel_limit *limit = &intel_limits_chv; + int refclk = 100000; + + if (!crtc_state->clock_set && + !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock, + refclk, NULL, &crtc_state->dpll)) + return -EINVAL; + + chv_compute_dpll(crtc_state); + + /* FIXME this is a mess */ + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) + return 0; + + crtc_state->port_clock = crtc_state->dpll.dot; + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return 0; +} + +static int vlv_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + const struct intel_limit *limit = &intel_limits_vlv; + int refclk = 100000; + + if (!crtc_state->clock_set && + !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock, + refclk, NULL, &crtc_state->dpll)) { + return -EINVAL; + } + + vlv_compute_dpll(crtc_state); + + /* FIXME this is a mess */ + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) + return 0; + + crtc_state->port_clock = crtc_state->dpll.dot; + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return 0; +} + +static int g4x_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + const struct intel_limit *limit; + int refclk = 96000; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { + if (intel_panel_use_ssc(dev_priv)) { + refclk = dev_priv->display.vbt.lvds_ssc_freq; + drm_dbg_kms(&dev_priv->drm, + "using SSC reference clock of %d kHz\n", + refclk); + } + + if (intel_is_dual_link_lvds(dev_priv)) + limit = &intel_limits_g4x_dual_channel_lvds; + else + limit = &intel_limits_g4x_single_channel_lvds; + } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) || + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) { + limit = &intel_limits_g4x_hdmi; + } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) { + limit = &intel_limits_g4x_sdvo; + } else { + /* The option is for other outputs */ + limit = &intel_limits_i9xx_sdvo; + } + + if (!crtc_state->clock_set && + !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock, + refclk, NULL, &crtc_state->dpll)) + return -EINVAL; + + i9xx_compute_dpll(crtc_state, &crtc_state->dpll, + &crtc_state->dpll); + + crtc_state->port_clock = crtc_state->dpll.dot; + /* FIXME this is a mess */ + if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_TVOUT)) + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return 0; +} + +static int pnv_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + const struct intel_limit *limit; + int refclk = 96000; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { + if (intel_panel_use_ssc(dev_priv)) { + refclk = dev_priv->display.vbt.lvds_ssc_freq; + drm_dbg_kms(&dev_priv->drm, + "using SSC reference clock of %d kHz\n", + refclk); + } + + limit = &pnv_limits_lvds; + } else { + limit = &pnv_limits_sdvo; + } + + if (!crtc_state->clock_set && + !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock, + refclk, NULL, &crtc_state->dpll)) + return -EINVAL; + + i9xx_compute_dpll(crtc_state, &crtc_state->dpll, + &crtc_state->dpll); + + crtc_state->port_clock = crtc_state->dpll.dot; + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return 0; +} + +static int i9xx_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + const struct intel_limit *limit; + int refclk = 96000; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { + if (intel_panel_use_ssc(dev_priv)) { + refclk = dev_priv->display.vbt.lvds_ssc_freq; + drm_dbg_kms(&dev_priv->drm, + "using SSC reference clock of %d kHz\n", + refclk); + } + + limit = &intel_limits_i9xx_lvds; + } else { + limit = &intel_limits_i9xx_sdvo; + } + + if (!crtc_state->clock_set && + !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock, + refclk, NULL, &crtc_state->dpll)) + return -EINVAL; + + i9xx_compute_dpll(crtc_state, &crtc_state->dpll, + &crtc_state->dpll); + + crtc_state->port_clock = crtc_state->dpll.dot; + /* FIXME this is a mess */ + if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_TVOUT)) + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return 0; +} + +static int i8xx_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + const struct intel_limit *limit; + int refclk = 48000; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { + if (intel_panel_use_ssc(dev_priv)) { + refclk = dev_priv->display.vbt.lvds_ssc_freq; + drm_dbg_kms(&dev_priv->drm, + "using SSC reference clock of %d kHz\n", + refclk); + } + + limit = &intel_limits_i8xx_lvds; + } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) { + limit = &intel_limits_i8xx_dvo; + } else { + limit = &intel_limits_i8xx_dac; + } + + if (!crtc_state->clock_set && + !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock, + refclk, NULL, &crtc_state->dpll)) + return -EINVAL; + + i8xx_compute_dpll(crtc_state, &crtc_state->dpll, + &crtc_state->dpll); + + crtc_state->port_clock = crtc_state->dpll.dot; + crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); + + return 0; +} + +static const struct intel_dpll_funcs mtl_dpll_funcs = { + .crtc_compute_clock = mtl_crtc_compute_clock, +}; + +static const struct intel_dpll_funcs dg2_dpll_funcs = { + .crtc_compute_clock = dg2_crtc_compute_clock, +}; + +static const struct intel_dpll_funcs hsw_dpll_funcs = { + .crtc_compute_clock = hsw_crtc_compute_clock, + .crtc_get_shared_dpll = hsw_crtc_get_shared_dpll, +}; + +static const struct intel_dpll_funcs ilk_dpll_funcs = { + .crtc_compute_clock = ilk_crtc_compute_clock, + .crtc_get_shared_dpll = ilk_crtc_get_shared_dpll, +}; + +static const struct intel_dpll_funcs chv_dpll_funcs = { + .crtc_compute_clock = chv_crtc_compute_clock, +}; + +static const struct intel_dpll_funcs vlv_dpll_funcs = { + .crtc_compute_clock = vlv_crtc_compute_clock, +}; + +static const struct intel_dpll_funcs g4x_dpll_funcs = { + .crtc_compute_clock = g4x_crtc_compute_clock, +}; + +static const struct intel_dpll_funcs pnv_dpll_funcs = { + .crtc_compute_clock = pnv_crtc_compute_clock, +}; + +static const struct intel_dpll_funcs i9xx_dpll_funcs = { + .crtc_compute_clock = i9xx_crtc_compute_clock, +}; + +static const struct intel_dpll_funcs i8xx_dpll_funcs = { + .crtc_compute_clock = i8xx_crtc_compute_clock, +}; + +int intel_dpll_crtc_compute_clock(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *i915 = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + int ret; + + drm_WARN_ON(&i915->drm, !intel_crtc_needs_modeset(crtc_state)); + + memset(&crtc_state->dpll_hw_state, 0, + sizeof(crtc_state->dpll_hw_state)); + + if (!crtc_state->hw.enable) + return 0; + + ret = i915->display.funcs.dpll->crtc_compute_clock(state, crtc); + if (ret) { + drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] Couldn't calculate DPLL settings\n", + crtc->base.base.id, crtc->base.name); + return ret; + } + + return 0; +} + +int intel_dpll_crtc_get_shared_dpll(struct intel_atomic_state *state, + struct intel_crtc *crtc) +{ + struct drm_i915_private *i915 = to_i915(state->base.dev); + struct intel_crtc_state *crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + int ret; + + drm_WARN_ON(&i915->drm, !intel_crtc_needs_modeset(crtc_state)); + drm_WARN_ON(&i915->drm, !crtc_state->hw.enable && crtc_state->shared_dpll); + + if (!crtc_state->hw.enable || crtc_state->shared_dpll) + return 0; + + if (!i915->display.funcs.dpll->crtc_get_shared_dpll) + return 0; + + ret = i915->display.funcs.dpll->crtc_get_shared_dpll(state, crtc); + if (ret) { + drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] Couldn't get a shared DPLL\n", + crtc->base.base.id, crtc->base.name); + return ret; + } + + return 0; +} + +void +intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv) +{ + if (DISPLAY_VER(dev_priv) >= 14) + dev_priv->display.funcs.dpll = &mtl_dpll_funcs; + else if (IS_DG2(dev_priv)) + dev_priv->display.funcs.dpll = &dg2_dpll_funcs; + else if (DISPLAY_VER(dev_priv) >= 9 || HAS_DDI(dev_priv)) + dev_priv->display.funcs.dpll = &hsw_dpll_funcs; + else if (HAS_PCH_SPLIT(dev_priv)) + dev_priv->display.funcs.dpll = &ilk_dpll_funcs; + else if (IS_CHERRYVIEW(dev_priv)) + dev_priv->display.funcs.dpll = &chv_dpll_funcs; + else if (IS_VALLEYVIEW(dev_priv)) + dev_priv->display.funcs.dpll = &vlv_dpll_funcs; + else if (IS_G4X(dev_priv)) + dev_priv->display.funcs.dpll = &g4x_dpll_funcs; + else if (IS_PINEVIEW(dev_priv)) + dev_priv->display.funcs.dpll = &pnv_dpll_funcs; + else if (DISPLAY_VER(dev_priv) != 2) + dev_priv->display.funcs.dpll = &i9xx_dpll_funcs; + else + dev_priv->display.funcs.dpll = &i8xx_dpll_funcs; +} + +static bool i9xx_has_pps(struct drm_i915_private *dev_priv) +{ + if (IS_I830(dev_priv)) + return false; + + return IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv); +} + +void i9xx_enable_pll(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + u32 dpll = crtc_state->dpll_hw_state.dpll; + enum pipe pipe = crtc->pipe; + int i; + + assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); + + /* PLL is protected by panel, make sure we can write it */ + if (i9xx_has_pps(dev_priv)) + assert_pps_unlocked(dev_priv, pipe); + + intel_de_write(dev_priv, FP0(pipe), crtc_state->dpll_hw_state.fp0); + intel_de_write(dev_priv, FP1(pipe), crtc_state->dpll_hw_state.fp1); + + /* + * Apparently we need to have VGA mode enabled prior to changing + * the P1/P2 dividers. Otherwise the DPLL will keep using the old + * dividers, even though the register value does change. + */ + intel_de_write(dev_priv, DPLL(pipe), dpll & ~DPLL_VGA_MODE_DIS); + intel_de_write(dev_priv, DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + intel_de_posting_read(dev_priv, DPLL(pipe)); + udelay(150); + + if (DISPLAY_VER(dev_priv) >= 4) { + intel_de_write(dev_priv, DPLL_MD(pipe), + crtc_state->dpll_hw_state.dpll_md); + } else { + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + intel_de_write(dev_priv, DPLL(pipe), dpll); + } + + /* We do this three times for luck */ + for (i = 0; i < 3; i++) { + intel_de_write(dev_priv, DPLL(pipe), dpll); + intel_de_posting_read(dev_priv, DPLL(pipe)); + udelay(150); /* wait for warmup */ + } +} + +static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + u32 reg_val; + + /* + * PLLB opamp always calibrates to max value of 0x3f, force enable it + * and set it to a reasonable value instead. + */ + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); + reg_val &= 0xffffff00; + reg_val |= 0x00000030; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); + + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); + reg_val &= 0x00ffffff; + reg_val |= 0x8c000000; + vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); + + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); + reg_val &= 0xffffff00; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); + + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); + reg_val &= 0x00ffffff; + reg_val |= 0xb0000000; + vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); +} + +static void vlv_prepare_pll(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + u32 mdiv; + u32 bestn, bestm1, bestm2, bestp1, bestp2; + u32 coreclk, reg_val; + + vlv_dpio_get(dev_priv); + + bestn = crtc_state->dpll.n; + bestm1 = crtc_state->dpll.m1; + bestm2 = crtc_state->dpll.m2; + bestp1 = crtc_state->dpll.p1; + bestp2 = crtc_state->dpll.p2; + + /* See eDP HDMI DPIO driver vbios notes doc */ + + /* PLL B needs special handling */ + if (pipe == PIPE_B) + vlv_pllb_recal_opamp(dev_priv, pipe); + + /* Set up Tx target for periodic Rcomp update */ + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f); + + /* Disable target IRef on PLL */ + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe)); + reg_val &= 0x00ffffff; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val); + + /* Disable fast lock */ + vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610); + + /* Set idtafcrecal before PLL is enabled */ + mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK)); + mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT)); + mdiv |= ((bestn << DPIO_N_SHIFT)); + mdiv |= (1 << DPIO_K_SHIFT); + + /* + * Post divider depends on pixel clock rate, DAC vs digital (and LVDS, + * but we don't support that). + * Note: don't use the DAC post divider as it seems unstable. + */ + mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); + + mdiv |= DPIO_ENABLE_CALIBRATION; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); + + /* Set HBR and RBR LPF coefficients */ + if (crtc_state->port_clock == 162000 || + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG) || + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), + 0x009f0003); + else + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), + 0x00d0000f); + + if (intel_crtc_has_dp_encoder(crtc_state)) { + /* Use SSC source */ + if (pipe == PIPE_A) + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), + 0x0df40000); + else + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), + 0x0df70000); + } else { /* HDMI or VGA */ + /* Use bend source */ + if (pipe == PIPE_A) + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), + 0x0df70000); + else + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), + 0x0df40000); + } + + coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe)); + coreclk = (coreclk & 0x0000ff00) | 0x01c00000; + if (intel_crtc_has_dp_encoder(crtc_state)) + coreclk |= 0x01000000; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk); + + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000); + + vlv_dpio_put(dev_priv); +} + +static void _vlv_enable_pll(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + intel_de_write(dev_priv, DPLL(pipe), crtc_state->dpll_hw_state.dpll); + intel_de_posting_read(dev_priv, DPLL(pipe)); + udelay(150); + + if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1)) + drm_err(&dev_priv->drm, "DPLL %d failed to lock\n", pipe); +} + +void vlv_enable_pll(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); + + /* PLL is protected by panel, make sure we can write it */ + assert_pps_unlocked(dev_priv, pipe); + + /* Enable Refclk */ + intel_de_write(dev_priv, DPLL(pipe), + crtc_state->dpll_hw_state.dpll & + ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV)); + + if (crtc_state->dpll_hw_state.dpll & DPLL_VCO_ENABLE) { + vlv_prepare_pll(crtc_state); + _vlv_enable_pll(crtc_state); + } + + intel_de_write(dev_priv, DPLL_MD(pipe), + crtc_state->dpll_hw_state.dpll_md); + intel_de_posting_read(dev_priv, DPLL_MD(pipe)); +} + +static void chv_prepare_pll(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 loopfilter, tribuf_calcntr; + u32 bestm2, bestp1, bestp2, bestm2_frac; + u32 dpio_val; + int vco; + + bestm2_frac = crtc_state->dpll.m2 & 0x3fffff; + bestm2 = crtc_state->dpll.m2 >> 22; + bestp1 = crtc_state->dpll.p1; + bestp2 = crtc_state->dpll.p2; + vco = crtc_state->dpll.vco; + dpio_val = 0; + loopfilter = 0; + + vlv_dpio_get(dev_priv); + + /* p1 and p2 divider */ + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port), + 5 << DPIO_CHV_S1_DIV_SHIFT | + bestp1 << DPIO_CHV_P1_DIV_SHIFT | + bestp2 << DPIO_CHV_P2_DIV_SHIFT | + 1 << DPIO_CHV_K_DIV_SHIFT); + + /* Feedback post-divider - m2 */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2); + + /* Feedback refclk divider - n and m1 */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port), + DPIO_CHV_M1_DIV_BY_2 | + 1 << DPIO_CHV_N_DIV_SHIFT); + + /* M2 fraction division */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac); + + /* M2 fraction division enable */ + dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port)); + dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN); + dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT); + if (bestm2_frac) + dpio_val |= DPIO_CHV_FRAC_DIV_EN; + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val); + + /* Program digital lock detect threshold */ + dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port)); + dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK | + DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE); + dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT); + if (!bestm2_frac) + dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE; + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val); + + /* Loop filter */ + if (vco == 5400000) { + loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT); + loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT); + loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT); + tribuf_calcntr = 0x9; + } else if (vco <= 6200000) { + loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT); + loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT); + loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT); + tribuf_calcntr = 0x9; + } else if (vco <= 6480000) { + loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT); + loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT); + loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT); + tribuf_calcntr = 0x8; + } else { + /* Not supported. Apply the same limits as in the max case */ + loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT); + loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT); + loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT); + tribuf_calcntr = 0; + } + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter); + + dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port)); + dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK; + dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT); + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val); + + /* AFC Recal */ + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), + vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) | + DPIO_AFC_RECAL); + + vlv_dpio_put(dev_priv); +} + +static void _chv_enable_pll(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 tmp; + + vlv_dpio_get(dev_priv); + + /* Enable back the 10bit clock to display controller */ + tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); + tmp |= DPIO_DCLKP_EN; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp); + + vlv_dpio_put(dev_priv); + + /* + * Need to wait > 100ns between dclkp clock enable bit and PLL enable. + */ + udelay(1); + + /* Enable PLL */ + intel_de_write(dev_priv, DPLL(pipe), crtc_state->dpll_hw_state.dpll); + + /* Check PLL is locked */ + if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1)) + drm_err(&dev_priv->drm, "PLL %d failed to lock\n", pipe); +} + +void chv_enable_pll(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); + + /* PLL is protected by panel, make sure we can write it */ + assert_pps_unlocked(dev_priv, pipe); + + /* Enable Refclk and SSC */ + intel_de_write(dev_priv, DPLL(pipe), + crtc_state->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE); + + if (crtc_state->dpll_hw_state.dpll & DPLL_VCO_ENABLE) { + chv_prepare_pll(crtc_state); + _chv_enable_pll(crtc_state); + } + + if (pipe != PIPE_A) { + /* + * WaPixelRepeatModeFixForC0:chv + * + * DPLLCMD is AWOL. Use chicken bits to propagate + * the value from DPLLBMD to either pipe B or C. + */ + intel_de_write(dev_priv, CBR4_VLV, CBR_DPLLBMD_PIPE(pipe)); + intel_de_write(dev_priv, DPLL_MD(PIPE_B), + crtc_state->dpll_hw_state.dpll_md); + intel_de_write(dev_priv, CBR4_VLV, 0); + dev_priv->display.state.chv_dpll_md[pipe] = crtc_state->dpll_hw_state.dpll_md; + + /* + * DPLLB VGA mode also seems to cause problems. + * We should always have it disabled. + */ + drm_WARN_ON(&dev_priv->drm, + (intel_de_read(dev_priv, DPLL(PIPE_B)) & + DPLL_VGA_MODE_DIS) == 0); + } else { + intel_de_write(dev_priv, DPLL_MD(pipe), + crtc_state->dpll_hw_state.dpll_md); + intel_de_posting_read(dev_priv, DPLL_MD(pipe)); + } +} + +/** + * vlv_force_pll_on - forcibly enable just the PLL + * @dev_priv: i915 private structure + * @pipe: pipe PLL to enable + * @dpll: PLL configuration + * + * Enable the PLL for @pipe using the supplied @dpll config. To be used + * in cases where we need the PLL enabled even when @pipe is not going to + * be enabled. + */ +int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe, + const struct dpll *dpll) +{ + struct intel_crtc *crtc = intel_crtc_for_pipe(dev_priv, pipe); + struct intel_crtc_state *crtc_state; + + crtc_state = intel_crtc_state_alloc(crtc); + if (!crtc_state) + return -ENOMEM; + + crtc_state->cpu_transcoder = (enum transcoder)pipe; + crtc_state->pixel_multiplier = 1; + crtc_state->dpll = *dpll; + crtc_state->output_types = BIT(INTEL_OUTPUT_EDP); + + if (IS_CHERRYVIEW(dev_priv)) { + chv_compute_dpll(crtc_state); + chv_enable_pll(crtc_state); + } else { + vlv_compute_dpll(crtc_state); + vlv_enable_pll(crtc_state); + } + + kfree(crtc_state); + + return 0; +} + +void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + u32 val; + + /* Make sure the pipe isn't still relying on us */ + assert_transcoder_disabled(dev_priv, (enum transcoder)pipe); + + val = DPLL_INTEGRATED_REF_CLK_VLV | + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; + if (pipe != PIPE_A) + val |= DPLL_INTEGRATED_CRI_CLK_VLV; + + intel_de_write(dev_priv, DPLL(pipe), val); + intel_de_posting_read(dev_priv, DPLL(pipe)); +} + +void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 val; + + /* Make sure the pipe isn't still relying on us */ + assert_transcoder_disabled(dev_priv, (enum transcoder)pipe); + + val = DPLL_SSC_REF_CLK_CHV | + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; + if (pipe != PIPE_A) + val |= DPLL_INTEGRATED_CRI_CLK_VLV; + + intel_de_write(dev_priv, DPLL(pipe), val); + intel_de_posting_read(dev_priv, DPLL(pipe)); + + vlv_dpio_get(dev_priv); + + /* Disable 10bit clock to display controller */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); + val &= ~DPIO_DCLKP_EN; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val); + + vlv_dpio_put(dev_priv); +} + +void i9xx_disable_pll(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + /* Don't disable pipe or pipe PLLs if needed */ + if (IS_I830(dev_priv)) + return; + + /* Make sure the pipe isn't still relying on us */ + assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); + + intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS); + intel_de_posting_read(dev_priv, DPLL(pipe)); +} + + +/** + * vlv_force_pll_off - forcibly disable just the PLL + * @dev_priv: i915 private structure + * @pipe: pipe PLL to disable + * + * Disable the PLL for @pipe. To be used in cases where we need + * the PLL enabled even when @pipe is not going to be enabled. + */ +void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + if (IS_CHERRYVIEW(dev_priv)) + chv_disable_pll(dev_priv, pipe); + else + vlv_disable_pll(dev_priv, pipe); +} + +/* Only for pre-ILK configs */ +static void assert_pll(struct drm_i915_private *dev_priv, + enum pipe pipe, bool state) +{ + bool cur_state; + + cur_state = intel_de_read(dev_priv, DPLL(pipe)) & DPLL_VCO_ENABLE; + I915_STATE_WARN(dev_priv, cur_state != state, + "PLL state assertion failure (expected %s, current %s)\n", + str_on_off(state), str_on_off(cur_state)); +} + +void assert_pll_enabled(struct drm_i915_private *i915, enum pipe pipe) +{ + assert_pll(i915, pipe, true); +} + +void assert_pll_disabled(struct drm_i915_private *i915, enum pipe pipe) +{ + assert_pll(i915, pipe, false); +} |