diff options
Diffstat (limited to 'drivers/gpu/drm/stm/dw_mipi_dsi-stm.c')
-rw-r--r-- | drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 602 |
1 files changed, 602 insertions, 0 deletions
diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c new file mode 100644 index 0000000000..d5f8c923d7 --- /dev/null +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c @@ -0,0 +1,602 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) STMicroelectronics SA 2017 + * + * Authors: Philippe Cornu <philippe.cornu@st.com> + * Yannick Fertre <yannick.fertre@st.com> + */ + +#include <linux/clk.h> +#include <linux/iopoll.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> + +#include <drm/bridge/dw_mipi_dsi.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_print.h> + +#define HWVER_130 0x31333000 /* IP version 1.30 */ +#define HWVER_131 0x31333100 /* IP version 1.31 */ + +/* DSI digital registers & bit definitions */ +#define DSI_VERSION 0x00 +#define VERSION GENMASK(31, 8) + +/* DSI wrapper registers & bit definitions */ +/* Note: registers are named as in the Reference Manual */ +#define DSI_WCFGR 0x0400 /* Wrapper ConFiGuration Reg */ +#define WCFGR_DSIM BIT(0) /* DSI Mode */ +#define WCFGR_COLMUX GENMASK(3, 1) /* COLor MUltipleXing */ + +#define DSI_WCR 0x0404 /* Wrapper Control Reg */ +#define WCR_DSIEN BIT(3) /* DSI ENable */ + +#define DSI_WISR 0x040C /* Wrapper Interrupt and Status Reg */ +#define WISR_PLLLS BIT(8) /* PLL Lock Status */ +#define WISR_RRS BIT(12) /* Regulator Ready Status */ + +#define DSI_WPCR0 0x0418 /* Wrapper Phy Conf Reg 0 */ +#define WPCR0_UIX4 GENMASK(5, 0) /* Unit Interval X 4 */ +#define WPCR0_TDDL BIT(16) /* Turn Disable Data Lanes */ + +#define DSI_WRPCR 0x0430 /* Wrapper Regulator & Pll Ctrl Reg */ +#define WRPCR_PLLEN BIT(0) /* PLL ENable */ +#define WRPCR_NDIV GENMASK(8, 2) /* pll loop DIVision Factor */ +#define WRPCR_IDF GENMASK(14, 11) /* pll Input Division Factor */ +#define WRPCR_ODF GENMASK(17, 16) /* pll Output Division Factor */ +#define WRPCR_REGEN BIT(24) /* REGulator ENable */ +#define WRPCR_BGREN BIT(28) /* BandGap Reference ENable */ +#define IDF_MIN 1 +#define IDF_MAX 7 +#define NDIV_MIN 10 +#define NDIV_MAX 125 +#define ODF_MIN 1 +#define ODF_MAX 8 + +/* dsi color format coding according to the datasheet */ +enum dsi_color { + DSI_RGB565_CONF1, + DSI_RGB565_CONF2, + DSI_RGB565_CONF3, + DSI_RGB666_CONF1, + DSI_RGB666_CONF2, + DSI_RGB888, +}; + +#define LANE_MIN_KBPS 31250 +#define LANE_MAX_KBPS 500000 + +/* Sleep & timeout for regulator on/off, pll lock/unlock & fifo empty */ +#define SLEEP_US 1000 +#define TIMEOUT_US 200000 + +struct dw_mipi_dsi_stm { + void __iomem *base; + struct clk *pllref_clk; + struct dw_mipi_dsi *dsi; + u32 hw_version; + int lane_min_kbps; + int lane_max_kbps; + struct regulator *vdd_supply; +}; + +static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val) +{ + writel(val, dsi->base + reg); +} + +static inline u32 dsi_read(struct dw_mipi_dsi_stm *dsi, u32 reg) +{ + return readl(dsi->base + reg); +} + +static inline void dsi_set(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask) +{ + dsi_write(dsi, reg, dsi_read(dsi, reg) | mask); +} + +static inline void dsi_clear(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask) +{ + dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask); +} + +static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg, + u32 mask, u32 val) +{ + dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val); +} + +static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt) +{ + switch (fmt) { + case MIPI_DSI_FMT_RGB888: + return DSI_RGB888; + case MIPI_DSI_FMT_RGB666: + return DSI_RGB666_CONF2; + case MIPI_DSI_FMT_RGB666_PACKED: + return DSI_RGB666_CONF1; + case MIPI_DSI_FMT_RGB565: + return DSI_RGB565_CONF1; + default: + DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n"); + } + return DSI_RGB888; +} + +static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf) +{ + int divisor = idf * odf; + + /* prevent from division by 0 */ + if (!divisor) + return 0; + + return DIV_ROUND_CLOSEST(clkin_khz * ndiv, divisor); +} + +static int dsi_pll_get_params(struct dw_mipi_dsi_stm *dsi, + int clkin_khz, int clkout_khz, + int *idf, int *ndiv, int *odf) +{ + int i, o, n, n_min, n_max; + int fvco_min, fvco_max, delta, best_delta; /* all in khz */ + + /* Early checks preventing division by 0 & odd results */ + if (clkin_khz <= 0 || clkout_khz <= 0) + return -EINVAL; + + fvco_min = dsi->lane_min_kbps * 2 * ODF_MAX; + fvco_max = dsi->lane_max_kbps * 2 * ODF_MIN; + + best_delta = 1000000; /* big started value (1000000khz) */ + + for (i = IDF_MIN; i <= IDF_MAX; i++) { + /* Compute ndiv range according to Fvco */ + n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1; + n_max = (fvco_max * i) / (2 * clkin_khz); + + /* No need to continue idf loop if we reach ndiv max */ + if (n_min >= NDIV_MAX) + break; + + /* Clamp ndiv to valid values */ + if (n_min < NDIV_MIN) + n_min = NDIV_MIN; + if (n_max > NDIV_MAX) + n_max = NDIV_MAX; + + for (o = ODF_MIN; o <= ODF_MAX; o *= 2) { + n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz); + /* Check ndiv according to vco range */ + if (n < n_min || n > n_max) + continue; + /* Check if new delta is better & saves parameters */ + delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) - + clkout_khz; + if (delta < 0) + delta = -delta; + if (delta < best_delta) { + *idf = i; + *ndiv = n; + *odf = o; + best_delta = delta; + } + /* fast return in case of "perfect result" */ + if (!delta) + return 0; + } + } + + return 0; +} + +static int dw_mipi_dsi_phy_init(void *priv_data) +{ + struct dw_mipi_dsi_stm *dsi = priv_data; + u32 val; + int ret; + + /* Enable the regulator */ + dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN); + ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS, + SLEEP_US, TIMEOUT_US); + if (ret) + DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n"); + + /* Enable the DSI PLL & wait for its lock */ + dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN); + ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS, + SLEEP_US, TIMEOUT_US); + if (ret) + DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n"); + + return 0; +} + +static void dw_mipi_dsi_phy_power_on(void *priv_data) +{ + struct dw_mipi_dsi_stm *dsi = priv_data; + + DRM_DEBUG_DRIVER("\n"); + + /* Enable the DSI wrapper */ + dsi_set(dsi, DSI_WCR, WCR_DSIEN); +} + +static void dw_mipi_dsi_phy_power_off(void *priv_data) +{ + struct dw_mipi_dsi_stm *dsi = priv_data; + + DRM_DEBUG_DRIVER("\n"); + + /* Disable the DSI wrapper */ + dsi_clear(dsi, DSI_WCR, WCR_DSIEN); +} + +static int +dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode, + unsigned long mode_flags, u32 lanes, u32 format, + unsigned int *lane_mbps) +{ + struct dw_mipi_dsi_stm *dsi = priv_data; + unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz; + int ret, bpp; + u32 val; + + pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000); + + /* Compute requested pll out */ + bpp = mipi_dsi_pixel_format_to_bpp(format); + pll_out_khz = mode->clock * bpp / lanes; + + /* Add 20% to pll out to be higher than pixel bw (burst mode only) */ + if (mode_flags & MIPI_DSI_MODE_VIDEO_BURST) + pll_out_khz = (pll_out_khz * 12) / 10; + + if (pll_out_khz > dsi->lane_max_kbps) { + pll_out_khz = dsi->lane_max_kbps; + DRM_WARN("Warning max phy mbps is used\n"); + } + if (pll_out_khz < dsi->lane_min_kbps) { + pll_out_khz = dsi->lane_min_kbps; + DRM_WARN("Warning min phy mbps is used\n"); + } + + /* Compute best pll parameters */ + idf = 0; + ndiv = 0; + odf = 0; + ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz, + &idf, &ndiv, &odf); + if (ret) + DRM_WARN("Warning dsi_pll_get_params(): bad params\n"); + + /* Get the adjusted pll out value */ + pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf); + + /* Set the PLL division factors */ + dsi_update_bits(dsi, DSI_WRPCR, WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF, + (ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16)); + + /* Compute uix4 & set the bit period in high-speed mode */ + val = 4000000 / pll_out_khz; + dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val); + + /* Select video mode by resetting DSIM bit */ + dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM); + + /* Select the color coding */ + dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX, + dsi_color_from_mipi(format) << 1); + + *lane_mbps = pll_out_khz / 1000; + + DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", + pll_in_khz, pll_out_khz, *lane_mbps); + + return 0; +} + +#define DSI_PHY_DELAY(fp, vp, mbps) DIV_ROUND_UP((fp) * (mbps) + 1000 * (vp), 8000) + +static int +dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps, + struct dw_mipi_dsi_dphy_timing *timing) +{ + /* + * From STM32MP157 datasheet, valid for STM32F469, STM32F7x9, STM32H747 + * phy_clkhs2lp_time = (272+136*UI)/(8*UI) + * phy_clklp2hs_time = (512+40*UI)/(8*UI) + * phy_hs2lp_time = (192+64*UI)/(8*UI) + * phy_lp2hs_time = (256+32*UI)/(8*UI) + */ + timing->clk_hs2lp = DSI_PHY_DELAY(272, 136, lane_mbps); + timing->clk_lp2hs = DSI_PHY_DELAY(512, 40, lane_mbps); + timing->data_hs2lp = DSI_PHY_DELAY(192, 64, lane_mbps); + timing->data_lp2hs = DSI_PHY_DELAY(256, 32, lane_mbps); + + return 0; +} + +#define CLK_TOLERANCE_HZ 50 + +static enum drm_mode_status +dw_mipi_dsi_stm_mode_valid(void *priv_data, + const struct drm_display_mode *mode, + unsigned long mode_flags, u32 lanes, u32 format) +{ + struct dw_mipi_dsi_stm *dsi = priv_data; + unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz; + int ret, bpp; + + bpp = mipi_dsi_pixel_format_to_bpp(format); + if (bpp < 0) + return MODE_BAD; + + /* Compute requested pll out */ + pll_out_khz = mode->clock * bpp / lanes; + + if (pll_out_khz > dsi->lane_max_kbps) + return MODE_CLOCK_HIGH; + + if (mode_flags & MIPI_DSI_MODE_VIDEO_BURST) { + /* Add 20% to pll out to be higher than pixel bw */ + pll_out_khz = (pll_out_khz * 12) / 10; + } else { + if (pll_out_khz < dsi->lane_min_kbps) + return MODE_CLOCK_LOW; + } + + /* Compute best pll parameters */ + idf = 0; + ndiv = 0; + odf = 0; + pll_in_khz = clk_get_rate(dsi->pllref_clk) / 1000; + ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz, &idf, &ndiv, &odf); + if (ret) { + DRM_WARN("Warning dsi_pll_get_params(): bad params\n"); + return MODE_ERROR; + } + + if (!(mode_flags & MIPI_DSI_MODE_VIDEO_BURST)) { + unsigned int px_clock_hz, target_px_clock_hz, lane_mbps; + int dsi_short_packet_size_px, hfp, hsync, hbp, delay_to_lp; + struct dw_mipi_dsi_dphy_timing dphy_timing; + + /* Get the adjusted pll out value */ + pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf); + + px_clock_hz = DIV_ROUND_CLOSEST_ULL(1000ULL * pll_out_khz * lanes, bpp); + target_px_clock_hz = mode->clock * 1000; + /* + * Filter modes according to the clock value, particularly useful for + * hdmi modes that require precise pixel clocks. + */ + if (px_clock_hz < target_px_clock_hz - CLK_TOLERANCE_HZ || + px_clock_hz > target_px_clock_hz + CLK_TOLERANCE_HZ) + return MODE_CLOCK_RANGE; + + /* sync packets are codes as DSI short packets (4 bytes) */ + dsi_short_packet_size_px = DIV_ROUND_UP(4 * BITS_PER_BYTE, bpp); + + hfp = mode->hsync_start - mode->hdisplay; + hsync = mode->hsync_end - mode->hsync_start; + hbp = mode->htotal - mode->hsync_end; + + /* hsync must be longer than 4 bytes HSS packets */ + if (hsync < dsi_short_packet_size_px) + return MODE_HSYNC_NARROW; + + if (mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) { + /* HBP must be longer than 4 bytes HSE packets */ + if (hbp < dsi_short_packet_size_px) + return MODE_HSYNC_NARROW; + hbp -= dsi_short_packet_size_px; + } else { + /* With sync events HBP extends in the hsync */ + hbp += hsync - dsi_short_packet_size_px; + } + + lane_mbps = pll_out_khz / 1000; + ret = dw_mipi_dsi_phy_get_timing(priv_data, lane_mbps, &dphy_timing); + if (ret) + return MODE_ERROR; + /* + * In non-burst mode DSI has to enter in LP during HFP + * (horizontal front porch) or HBP (horizontal back porch) to + * resync with LTDC pixel clock. + */ + delay_to_lp = DIV_ROUND_UP((dphy_timing.data_hs2lp + dphy_timing.data_lp2hs) * + lanes * BITS_PER_BYTE, bpp); + if (hfp < delay_to_lp && hbp < delay_to_lp) + return MODE_HSYNC; + } + + return MODE_OK; +} + +static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = { + .init = dw_mipi_dsi_phy_init, + .power_on = dw_mipi_dsi_phy_power_on, + .power_off = dw_mipi_dsi_phy_power_off, + .get_lane_mbps = dw_mipi_dsi_get_lane_mbps, + .get_timing = dw_mipi_dsi_phy_get_timing, +}; + +static struct dw_mipi_dsi_plat_data dw_mipi_dsi_stm_plat_data = { + .max_data_lanes = 2, + .mode_valid = dw_mipi_dsi_stm_mode_valid, + .phy_ops = &dw_mipi_dsi_stm_phy_ops, +}; + +static const struct of_device_id dw_mipi_dsi_stm_dt_ids[] = { + { .compatible = "st,stm32-dsi", .data = &dw_mipi_dsi_stm_plat_data, }, + { }, +}; +MODULE_DEVICE_TABLE(of, dw_mipi_dsi_stm_dt_ids); + +static int dw_mipi_dsi_stm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct dw_mipi_dsi_stm *dsi; + struct clk *pclk; + int ret; + + dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); + if (!dsi) + return -ENOMEM; + + dsi->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(dsi->base)) { + ret = PTR_ERR(dsi->base); + DRM_ERROR("Unable to get dsi registers %d\n", ret); + return ret; + } + + dsi->vdd_supply = devm_regulator_get(dev, "phy-dsi"); + if (IS_ERR(dsi->vdd_supply)) { + ret = PTR_ERR(dsi->vdd_supply); + dev_err_probe(dev, ret, "Failed to request regulator\n"); + return ret; + } + + ret = regulator_enable(dsi->vdd_supply); + if (ret) { + DRM_ERROR("Failed to enable regulator: %d\n", ret); + return ret; + } + + dsi->pllref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(dsi->pllref_clk)) { + ret = PTR_ERR(dsi->pllref_clk); + dev_err_probe(dev, ret, "Unable to get pll reference clock\n"); + goto err_clk_get; + } + + ret = clk_prepare_enable(dsi->pllref_clk); + if (ret) { + DRM_ERROR("Failed to enable pllref_clk: %d\n", ret); + goto err_clk_get; + } + + pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(pclk)) { + ret = PTR_ERR(pclk); + DRM_ERROR("Unable to get peripheral clock: %d\n", ret); + goto err_dsi_probe; + } + + ret = clk_prepare_enable(pclk); + if (ret) { + DRM_ERROR("%s: Failed to enable peripheral clk\n", __func__); + goto err_dsi_probe; + } + + dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION; + clk_disable_unprepare(pclk); + + if (dsi->hw_version != HWVER_130 && dsi->hw_version != HWVER_131) { + ret = -ENODEV; + DRM_ERROR("bad dsi hardware version\n"); + goto err_dsi_probe; + } + + /* set lane capabilities according to hw version */ + dsi->lane_min_kbps = LANE_MIN_KBPS; + dsi->lane_max_kbps = LANE_MAX_KBPS; + if (dsi->hw_version == HWVER_131) { + dsi->lane_min_kbps *= 2; + dsi->lane_max_kbps *= 2; + } + + dw_mipi_dsi_stm_plat_data.base = dsi->base; + dw_mipi_dsi_stm_plat_data.priv_data = dsi; + + platform_set_drvdata(pdev, dsi); + + dsi->dsi = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data); + if (IS_ERR(dsi->dsi)) { + ret = PTR_ERR(dsi->dsi); + dev_err_probe(dev, ret, "Failed to initialize mipi dsi host\n"); + goto err_dsi_probe; + } + + return 0; + +err_dsi_probe: + clk_disable_unprepare(dsi->pllref_clk); +err_clk_get: + regulator_disable(dsi->vdd_supply); + + return ret; +} + +static void dw_mipi_dsi_stm_remove(struct platform_device *pdev) +{ + struct dw_mipi_dsi_stm *dsi = platform_get_drvdata(pdev); + + dw_mipi_dsi_remove(dsi->dsi); + clk_disable_unprepare(dsi->pllref_clk); + regulator_disable(dsi->vdd_supply); +} + +static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev) +{ + struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data; + + DRM_DEBUG_DRIVER("\n"); + + clk_disable_unprepare(dsi->pllref_clk); + regulator_disable(dsi->vdd_supply); + + return 0; +} + +static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev) +{ + struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data; + int ret; + + DRM_DEBUG_DRIVER("\n"); + + ret = regulator_enable(dsi->vdd_supply); + if (ret) { + DRM_ERROR("Failed to enable regulator: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(dsi->pllref_clk); + if (ret) { + regulator_disable(dsi->vdd_supply); + DRM_ERROR("Failed to enable pllref_clk: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct dev_pm_ops dw_mipi_dsi_stm_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dw_mipi_dsi_stm_suspend, + dw_mipi_dsi_stm_resume) +}; + +static struct platform_driver dw_mipi_dsi_stm_driver = { + .probe = dw_mipi_dsi_stm_probe, + .remove_new = dw_mipi_dsi_stm_remove, + .driver = { + .of_match_table = dw_mipi_dsi_stm_dt_ids, + .name = "stm32-display-dsi", + .pm = &dw_mipi_dsi_stm_pm_ops, + }, +}; + +module_platform_driver(dw_mipi_dsi_stm_driver); + +MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>"); +MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics DW MIPI DSI host controller driver"); +MODULE_LICENSE("GPL v2"); |