diff options
Diffstat (limited to 'drivers/hwmon/pmbus/tda38640.c')
| -rw-r--r-- | drivers/hwmon/pmbus/tda38640.c | 154 |
1 files changed, 152 insertions, 2 deletions
diff --git a/drivers/hwmon/pmbus/tda38640.c b/drivers/hwmon/pmbus/tda38640.c index 450b0273fb..09cd114b17 100644 --- a/drivers/hwmon/pmbus/tda38640.c +++ b/drivers/hwmon/pmbus/tda38640.c @@ -18,6 +18,127 @@ static const struct regulator_desc __maybe_unused tda38640_reg_desc[] = { PMBUS_REGULATOR("vout", 0), }; +struct tda38640_data { + struct pmbus_driver_info info; + u32 en_pin_lvl; +}; + +#define to_tda38640_data(x) container_of(x, struct tda38640_data, info) + +/* + * Map PB_ON_OFF_CONFIG_POLARITY_HIGH to PB_OPERATION_CONTROL_ON. + */ +static int tda38640_read_byte_data(struct i2c_client *client, int page, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct tda38640_data *data = to_tda38640_data(info); + int ret, on_off_config, enabled; + + if (reg != PMBUS_OPERATION) + return -ENODATA; + + ret = pmbus_read_byte_data(client, page, reg); + if (ret < 0) + return ret; + + on_off_config = pmbus_read_byte_data(client, page, + PMBUS_ON_OFF_CONFIG); + if (on_off_config < 0) + return on_off_config; + + enabled = !!(on_off_config & PB_ON_OFF_CONFIG_POLARITY_HIGH); + + enabled ^= data->en_pin_lvl; + if (enabled) + ret &= ~PB_OPERATION_CONTROL_ON; + else + ret |= PB_OPERATION_CONTROL_ON; + + return ret; +} + +/* + * Map PB_OPERATION_CONTROL_ON to PB_ON_OFF_CONFIG_POLARITY_HIGH. + */ +static int tda38640_write_byte_data(struct i2c_client *client, int page, + int reg, u8 byte) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct tda38640_data *data = to_tda38640_data(info); + int enable, ret; + + if (reg != PMBUS_OPERATION) + return -ENODATA; + + enable = !!(byte & PB_OPERATION_CONTROL_ON); + + byte &= ~PB_OPERATION_CONTROL_ON; + ret = pmbus_write_byte_data(client, page, reg, byte); + if (ret < 0) + return ret; + + enable ^= data->en_pin_lvl; + + return pmbus_update_byte_data(client, page, PMBUS_ON_OFF_CONFIG, + PB_ON_OFF_CONFIG_POLARITY_HIGH, + enable ? 0 : PB_ON_OFF_CONFIG_POLARITY_HIGH); +} + +static int svid_mode(struct i2c_client *client, struct tda38640_data *data) +{ + /* PMBUS_MFR_READ(0xD0) + MTP Address offset */ + u8 write_buf[] = {0xd0, 0x44, 0x00}; + u8 read_buf[2]; + int ret, svid; + bool off, reg_en_pin_pol; + + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .flags = 0, + .buf = write_buf, + .len = sizeof(write_buf), + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = read_buf, + .len = sizeof(read_buf), + } + }; + + ret = i2c_transfer(client->adapter, msgs, 2); + if (ret < 0) { + dev_err(&client->dev, "i2c_transfer failed. %d", ret); + return ret; + } + + /* + * 0x44[15] determines PMBus Operating Mode + * If bit is set then it is SVID mode. + */ + svid = !!(read_buf[1] & BIT(7)); + + /* + * Determine EN pin level for use in SVID mode. + * This is done with help of STATUS_BYTE bit 6(OFF) & ON_OFF_CONFIG bit 2(EN pin polarity). + */ + if (svid) { + ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE); + if (ret < 0) + return ret; + off = !!(ret & PB_STATUS_OFF); + + ret = i2c_smbus_read_byte_data(client, PMBUS_ON_OFF_CONFIG); + if (ret < 0) + return ret; + reg_en_pin_pol = !!(ret & PB_ON_OFF_CONFIG_POLARITY_HIGH); + data->en_pin_lvl = off ^ reg_en_pin_pol; + } + + return svid; +} + static struct pmbus_driver_info tda38640_info = { .pages = 1, .format[PSC_VOLTAGE_IN] = linear, @@ -26,7 +147,6 @@ static struct pmbus_driver_info tda38640_info = { .format[PSC_CURRENT_IN] = linear, .format[PSC_POWER] = linear, .format[PSC_TEMPERATURE] = linear, - .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_IIN @@ -41,7 +161,37 @@ static struct pmbus_driver_info tda38640_info = { static int tda38640_probe(struct i2c_client *client) { - return pmbus_do_probe(client, &tda38640_info); + struct tda38640_data *data; + int svid; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + memcpy(&data->info, &tda38640_info, sizeof(tda38640_info)); + + if (IS_ENABLED(CONFIG_SENSORS_TDA38640_REGULATOR) && + of_property_read_bool(client->dev.of_node, "infineon,en-pin-fixed-level")) { + svid = svid_mode(client, data); + if (svid < 0) { + dev_err_probe(&client->dev, svid, "Could not determine operating mode."); + return svid; + } + + /* + * Apply ON_OFF_CONFIG workaround as enabling the regulator using the + * OPERATION register doesn't work in SVID mode. + * + * One should configure PMBUS_ON_OFF_CONFIG here, but + * PB_ON_OFF_CONFIG_POWERUP_CONTROL and PB_ON_OFF_CONFIG_EN_PIN_REQ + * are ignored by the device. + * Only PB_ON_OFF_CONFIG_POLARITY_HIGH has an effect. + */ + if (svid) { + data->info.read_byte_data = tda38640_read_byte_data; + data->info.write_byte_data = tda38640_write_byte_data; + } + } + return pmbus_do_probe(client, &data->info); } static const struct i2c_device_id tda38640_id[] = { |