diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/corsair-cpro.c | 45 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/ucd9000.c | 6 |
2 files changed, 35 insertions, 16 deletions
diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c index a284a02839..3e63666a61 100644 --- a/drivers/hwmon/corsair-cpro.c +++ b/drivers/hwmon/corsair-cpro.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/slab.h> +#include <linux/spinlock.h> #include <linux/types.h> #define USB_VENDOR_ID_CORSAIR 0x1b1c @@ -77,8 +78,11 @@ struct ccp_device { struct hid_device *hdev; struct device *hwmon_dev; + /* For reinitializing the completion below */ + spinlock_t wait_input_report_lock; struct completion wait_input_report; struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */ + u8 *cmd_buffer; u8 *buffer; int target[6]; DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS); @@ -111,15 +115,23 @@ static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2, unsigned long t; int ret; - memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); - ccp->buffer[0] = command; - ccp->buffer[1] = byte1; - ccp->buffer[2] = byte2; - ccp->buffer[3] = byte3; - + memset(ccp->cmd_buffer, 0x00, OUT_BUFFER_SIZE); + ccp->cmd_buffer[0] = command; + ccp->cmd_buffer[1] = byte1; + ccp->cmd_buffer[2] = byte2; + ccp->cmd_buffer[3] = byte3; + + /* + * Disable raw event parsing for a moment to safely reinitialize the + * completion. Reinit is done because hidraw could have triggered + * the raw event parsing and marked the ccp->wait_input_report + * completion as done. + */ + spin_lock_bh(&ccp->wait_input_report_lock); reinit_completion(&ccp->wait_input_report); + spin_unlock_bh(&ccp->wait_input_report_lock); - ret = hid_hw_output_report(ccp->hdev, ccp->buffer, OUT_BUFFER_SIZE); + ret = hid_hw_output_report(ccp->hdev, ccp->cmd_buffer, OUT_BUFFER_SIZE); if (ret < 0) return ret; @@ -135,11 +147,12 @@ static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8 struct ccp_device *ccp = hid_get_drvdata(hdev); /* only copy buffer when requested */ - if (completion_done(&ccp->wait_input_report)) - return 0; - - memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size)); - complete(&ccp->wait_input_report); + spin_lock(&ccp->wait_input_report_lock); + if (!completion_done(&ccp->wait_input_report)) { + memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size)); + complete_all(&ccp->wait_input_report); + } + spin_unlock(&ccp->wait_input_report_lock); return 0; } @@ -492,7 +505,11 @@ static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) if (!ccp) return -ENOMEM; - ccp->buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + ccp->cmd_buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + if (!ccp->cmd_buffer) + return -ENOMEM; + + ccp->buffer = devm_kmalloc(&hdev->dev, IN_BUFFER_SIZE, GFP_KERNEL); if (!ccp->buffer) return -ENOMEM; @@ -510,7 +527,9 @@ static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) ccp->hdev = hdev; hid_set_drvdata(hdev, ccp); + mutex_init(&ccp->mutex); + spin_lock_init(&ccp->wait_input_report_lock); init_completion(&ccp->wait_input_report); hid_device_io_start(hdev); diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index 8d9d422450..d817c719b9 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -80,11 +80,11 @@ struct ucd9000_debugfs_entry { * It has been observed that the UCD90320 randomly fails register access when * doing another access right on the back of a register write. To mitigate this * make sure that there is a minimum delay between a write access and the - * following access. The 250us is based on experimental data. At a delay of - * 200us the issue seems to go away. Add a bit of extra margin to allow for + * following access. The 500 is based on experimental data. At a delay of + * 350us the issue seems to go away. Add a bit of extra margin to allow for * system to system differences. */ -#define UCD90320_WAIT_DELAY_US 250 +#define UCD90320_WAIT_DELAY_US 500 static inline void ucd90320_wait(const struct ucd9000_data *data) { |