summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-cadence.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-cadence.c')
-rw-r--r--drivers/i2c/busses/i2c-cadence.c1447
1 files changed, 1447 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
new file mode 100644
index 0000000000..de3f58b60d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -0,0 +1,1447 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * I2C bus driver for the Cadence I2C controller.
+ *
+ * Copyright (C) 2009 - 2014 Xilinx, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/reset.h>
+
+/* Register offsets for the I2C device. */
+#define CDNS_I2C_CR_OFFSET 0x00 /* Control Register, RW */
+#define CDNS_I2C_SR_OFFSET 0x04 /* Status Register, RO */
+#define CDNS_I2C_ADDR_OFFSET 0x08 /* I2C Address Register, RW */
+#define CDNS_I2C_DATA_OFFSET 0x0C /* I2C Data Register, RW */
+#define CDNS_I2C_ISR_OFFSET 0x10 /* IRQ Status Register, RW */
+#define CDNS_I2C_XFER_SIZE_OFFSET 0x14 /* Transfer Size Register, RW */
+#define CDNS_I2C_TIME_OUT_OFFSET 0x1C /* Time Out Register, RW */
+#define CDNS_I2C_IMR_OFFSET 0x20 /* IRQ Mask Register, RO */
+#define CDNS_I2C_IER_OFFSET 0x24 /* IRQ Enable Register, WO */
+#define CDNS_I2C_IDR_OFFSET 0x28 /* IRQ Disable Register, WO */
+
+/* Control Register Bit mask definitions */
+#define CDNS_I2C_CR_HOLD BIT(4) /* Hold Bus bit */
+#define CDNS_I2C_CR_ACK_EN BIT(3)
+#define CDNS_I2C_CR_NEA BIT(2)
+#define CDNS_I2C_CR_MS BIT(1)
+/* Read or Write Master transfer 0 = Transmitter, 1 = Receiver */
+#define CDNS_I2C_CR_RW BIT(0)
+/* 1 = Auto init FIFO to zeroes */
+#define CDNS_I2C_CR_CLR_FIFO BIT(6)
+#define CDNS_I2C_CR_DIVA_SHIFT 14
+#define CDNS_I2C_CR_DIVA_MASK (3 << CDNS_I2C_CR_DIVA_SHIFT)
+#define CDNS_I2C_CR_DIVB_SHIFT 8
+#define CDNS_I2C_CR_DIVB_MASK (0x3f << CDNS_I2C_CR_DIVB_SHIFT)
+
+#define CDNS_I2C_CR_MASTER_EN_MASK (CDNS_I2C_CR_NEA | \
+ CDNS_I2C_CR_ACK_EN | \
+ CDNS_I2C_CR_MS)
+
+#define CDNS_I2C_CR_SLAVE_EN_MASK ~CDNS_I2C_CR_MASTER_EN_MASK
+
+/* Status Register Bit mask definitions */
+#define CDNS_I2C_SR_BA BIT(8)
+#define CDNS_I2C_SR_TXDV BIT(6)
+#define CDNS_I2C_SR_RXDV BIT(5)
+#define CDNS_I2C_SR_RXRW BIT(3)
+
+/*
+ * I2C Address Register Bit mask definitions
+ * Normal addressing mode uses [6:0] bits. Extended addressing mode uses [9:0]
+ * bits. A write access to this register always initiates a transfer if the I2C
+ * is in master mode.
+ */
+#define CDNS_I2C_ADDR_MASK 0x000003FF /* I2C Address Mask */
+
+/*
+ * I2C Interrupt Registers Bit mask definitions
+ * All the four interrupt registers (Status/Mask/Enable/Disable) have the same
+ * bit definitions.
+ */
+#define CDNS_I2C_IXR_ARB_LOST BIT(9)
+#define CDNS_I2C_IXR_RX_UNF BIT(7)
+#define CDNS_I2C_IXR_TX_OVF BIT(6)
+#define CDNS_I2C_IXR_RX_OVF BIT(5)
+#define CDNS_I2C_IXR_SLV_RDY BIT(4)
+#define CDNS_I2C_IXR_TO BIT(3)
+#define CDNS_I2C_IXR_NACK BIT(2)
+#define CDNS_I2C_IXR_DATA BIT(1)
+#define CDNS_I2C_IXR_COMP BIT(0)
+
+#define CDNS_I2C_IXR_ALL_INTR_MASK (CDNS_I2C_IXR_ARB_LOST | \
+ CDNS_I2C_IXR_RX_UNF | \
+ CDNS_I2C_IXR_TX_OVF | \
+ CDNS_I2C_IXR_RX_OVF | \
+ CDNS_I2C_IXR_SLV_RDY | \
+ CDNS_I2C_IXR_TO | \
+ CDNS_I2C_IXR_NACK | \
+ CDNS_I2C_IXR_DATA | \
+ CDNS_I2C_IXR_COMP)
+
+#define CDNS_I2C_IXR_ERR_INTR_MASK (CDNS_I2C_IXR_ARB_LOST | \
+ CDNS_I2C_IXR_RX_UNF | \
+ CDNS_I2C_IXR_TX_OVF | \
+ CDNS_I2C_IXR_RX_OVF | \
+ CDNS_I2C_IXR_NACK)
+
+#define CDNS_I2C_ENABLED_INTR_MASK (CDNS_I2C_IXR_ARB_LOST | \
+ CDNS_I2C_IXR_RX_UNF | \
+ CDNS_I2C_IXR_TX_OVF | \
+ CDNS_I2C_IXR_RX_OVF | \
+ CDNS_I2C_IXR_NACK | \
+ CDNS_I2C_IXR_DATA | \
+ CDNS_I2C_IXR_COMP)
+
+#define CDNS_I2C_IXR_SLAVE_INTR_MASK (CDNS_I2C_IXR_RX_UNF | \
+ CDNS_I2C_IXR_TX_OVF | \
+ CDNS_I2C_IXR_RX_OVF | \
+ CDNS_I2C_IXR_TO | \
+ CDNS_I2C_IXR_NACK | \
+ CDNS_I2C_IXR_DATA | \
+ CDNS_I2C_IXR_COMP)
+
+#define CDNS_I2C_TIMEOUT msecs_to_jiffies(1000)
+/* timeout for pm runtime autosuspend */
+#define CNDS_I2C_PM_TIMEOUT 1000 /* ms */
+
+#define CDNS_I2C_FIFO_DEPTH_DEFAULT 16
+#define CDNS_I2C_MAX_TRANSFER_SIZE 255
+/* Transfer size in multiples of data interrupt depth */
+#define CDNS_I2C_TRANSFER_SIZE(max) ((max) - 3)
+
+#define DRIVER_NAME "cdns-i2c"
+
+#define CDNS_I2C_DIVA_MAX 4
+#define CDNS_I2C_DIVB_MAX 64
+
+#define CDNS_I2C_TIMEOUT_MAX 0xFF
+
+#define CDNS_I2C_BROKEN_HOLD_BIT BIT(0)
+#define CDNS_I2C_POLL_US 100000
+#define CDNS_I2C_TIMEOUT_US 500000
+
+#define cdns_i2c_readreg(offset) readl_relaxed(id->membase + offset)
+#define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+/**
+ * enum cdns_i2c_mode - I2C Controller current operating mode
+ *
+ * @CDNS_I2C_MODE_SLAVE: I2C controller operating in slave mode
+ * @CDNS_I2C_MODE_MASTER: I2C Controller operating in master mode
+ */
+enum cdns_i2c_mode {
+ CDNS_I2C_MODE_SLAVE,
+ CDNS_I2C_MODE_MASTER,
+};
+
+/**
+ * enum cdns_i2c_slave_state - Slave state when I2C is operating in slave mode
+ *
+ * @CDNS_I2C_SLAVE_STATE_IDLE: I2C slave idle
+ * @CDNS_I2C_SLAVE_STATE_SEND: I2C slave sending data to master
+ * @CDNS_I2C_SLAVE_STATE_RECV: I2C slave receiving data from master
+ */
+enum cdns_i2c_slave_state {
+ CDNS_I2C_SLAVE_STATE_IDLE,
+ CDNS_I2C_SLAVE_STATE_SEND,
+ CDNS_I2C_SLAVE_STATE_RECV,
+};
+#endif
+
+/**
+ * struct cdns_i2c - I2C device private data structure
+ *
+ * @dev: Pointer to device structure
+ * @membase: Base address of the I2C device
+ * @adap: I2C adapter instance
+ * @p_msg: Message pointer
+ * @err_status: Error status in Interrupt Status Register
+ * @xfer_done: Transfer complete status
+ * @p_send_buf: Pointer to transmit buffer
+ * @p_recv_buf: Pointer to receive buffer
+ * @send_count: Number of bytes still expected to send
+ * @recv_count: Number of bytes still expected to receive
+ * @curr_recv_count: Number of bytes to be received in current transfer
+ * @input_clk: Input clock to I2C controller
+ * @i2c_clk: Maximum I2C clock speed
+ * @bus_hold_flag: Flag used in repeated start for clearing HOLD bit
+ * @clk: Pointer to struct clk
+ * @clk_rate_change_nb: Notifier block for clock rate changes
+ * @reset: Reset control for the device
+ * @quirks: flag for broken hold bit usage in r1p10
+ * @ctrl_reg: Cached value of the control register.
+ * @rinfo: I2C GPIO recovery information
+ * @ctrl_reg_diva_divb: value of fields DIV_A and DIV_B from CR register
+ * @slave: Registered slave instance.
+ * @dev_mode: I2C operating role(master/slave).
+ * @slave_state: I2C Slave state(idle/read/write).
+ * @fifo_depth: The depth of the transfer FIFO
+ * @transfer_size: The maximum number of bytes in one transfer
+ */
+struct cdns_i2c {
+ struct device *dev;
+ void __iomem *membase;
+ struct i2c_adapter adap;
+ struct i2c_msg *p_msg;
+ int err_status;
+ struct completion xfer_done;
+ unsigned char *p_send_buf;
+ unsigned char *p_recv_buf;
+ unsigned int send_count;
+ unsigned int recv_count;
+ unsigned int curr_recv_count;
+ unsigned long input_clk;
+ unsigned int i2c_clk;
+ unsigned int bus_hold_flag;
+ struct clk *clk;
+ struct notifier_block clk_rate_change_nb;
+ struct reset_control *reset;
+ u32 quirks;
+ u32 ctrl_reg;
+ struct i2c_bus_recovery_info rinfo;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ u16 ctrl_reg_diva_divb;
+ struct i2c_client *slave;
+ enum cdns_i2c_mode dev_mode;
+ enum cdns_i2c_slave_state slave_state;
+#endif
+ u32 fifo_depth;
+ unsigned int transfer_size;
+};
+
+struct cdns_platform_data {
+ u32 quirks;
+};
+
+#define to_cdns_i2c(_nb) container_of(_nb, struct cdns_i2c, \
+ clk_rate_change_nb)
+
+/**
+ * cdns_i2c_clear_bus_hold - Clear bus hold bit
+ * @id: Pointer to driver data struct
+ *
+ * Helper to clear the controller's bus hold bit.
+ */
+static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id)
+{
+ u32 reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ if (reg & CDNS_I2C_CR_HOLD)
+ cdns_i2c_writereg(reg & ~CDNS_I2C_CR_HOLD, CDNS_I2C_CR_OFFSET);
+}
+
+static inline bool cdns_is_holdquirk(struct cdns_i2c *id, bool hold_wrkaround)
+{
+ return (hold_wrkaround &&
+ (id->curr_recv_count == id->fifo_depth + 1));
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static void cdns_i2c_set_mode(enum cdns_i2c_mode mode, struct cdns_i2c *id)
+{
+ /* Disable all interrupts */
+ cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK, CDNS_I2C_IDR_OFFSET);
+
+ /* Clear FIFO and transfer size */
+ cdns_i2c_writereg(CDNS_I2C_CR_CLR_FIFO, CDNS_I2C_CR_OFFSET);
+
+ /* Update device mode and state */
+ id->dev_mode = mode;
+ id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+
+ switch (mode) {
+ case CDNS_I2C_MODE_MASTER:
+ /* Enable i2c master */
+ cdns_i2c_writereg(id->ctrl_reg_diva_divb |
+ CDNS_I2C_CR_MASTER_EN_MASK,
+ CDNS_I2C_CR_OFFSET);
+ /*
+ * This delay is needed to give the IP some time to switch to
+ * the master mode. With lower values(like 110 us) i2cdetect
+ * will not detect any slave and without this delay, the IP will
+ * trigger a timeout interrupt.
+ */
+ usleep_range(115, 125);
+ break;
+ case CDNS_I2C_MODE_SLAVE:
+ /* Enable i2c slave */
+ cdns_i2c_writereg(id->ctrl_reg_diva_divb &
+ CDNS_I2C_CR_SLAVE_EN_MASK,
+ CDNS_I2C_CR_OFFSET);
+
+ /* Setting slave address */
+ cdns_i2c_writereg(id->slave->addr & CDNS_I2C_ADDR_MASK,
+ CDNS_I2C_ADDR_OFFSET);
+
+ /* Enable slave send/receive interrupts */
+ cdns_i2c_writereg(CDNS_I2C_IXR_SLAVE_INTR_MASK,
+ CDNS_I2C_IER_OFFSET);
+ break;
+ }
+}
+
+static void cdns_i2c_slave_rcv_data(struct cdns_i2c *id)
+{
+ u8 bytes;
+ unsigned char data;
+
+ /* Prepare backend for data reception */
+ if (id->slave_state == CDNS_I2C_SLAVE_STATE_IDLE) {
+ id->slave_state = CDNS_I2C_SLAVE_STATE_RECV;
+ i2c_slave_event(id->slave, I2C_SLAVE_WRITE_REQUESTED, NULL);
+ }
+
+ /* Fetch number of bytes to receive */
+ bytes = cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+
+ /* Read data and send to backend */
+ while (bytes--) {
+ data = cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+ i2c_slave_event(id->slave, I2C_SLAVE_WRITE_RECEIVED, &data);
+ }
+}
+
+static void cdns_i2c_slave_send_data(struct cdns_i2c *id)
+{
+ u8 data;
+
+ /* Prepare backend for data transmission */
+ if (id->slave_state == CDNS_I2C_SLAVE_STATE_IDLE) {
+ id->slave_state = CDNS_I2C_SLAVE_STATE_SEND;
+ i2c_slave_event(id->slave, I2C_SLAVE_READ_REQUESTED, &data);
+ } else {
+ i2c_slave_event(id->slave, I2C_SLAVE_READ_PROCESSED, &data);
+ }
+
+ /* Send data over bus */
+ cdns_i2c_writereg(data, CDNS_I2C_DATA_OFFSET);
+}
+
+/**
+ * cdns_i2c_slave_isr - Interrupt handler for the I2C device in slave role
+ * @ptr: Pointer to I2C device private data
+ *
+ * This function handles the data interrupt and transfer complete interrupt of
+ * the I2C device in slave role.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_slave_isr(void *ptr)
+{
+ struct cdns_i2c *id = ptr;
+ unsigned int isr_status, i2c_status;
+
+ /* Fetch the interrupt status */
+ isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+ cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+ /* Ignore masked interrupts */
+ isr_status &= ~cdns_i2c_readreg(CDNS_I2C_IMR_OFFSET);
+
+ /* Fetch transfer mode (send/receive) */
+ i2c_status = cdns_i2c_readreg(CDNS_I2C_SR_OFFSET);
+
+ /* Handle data send/receive */
+ if (i2c_status & CDNS_I2C_SR_RXRW) {
+ /* Send data to master */
+ if (isr_status & CDNS_I2C_IXR_DATA)
+ cdns_i2c_slave_send_data(id);
+
+ if (isr_status & CDNS_I2C_IXR_COMP) {
+ id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+ i2c_slave_event(id->slave, I2C_SLAVE_STOP, NULL);
+ }
+ } else {
+ /* Receive data from master */
+ if (isr_status & CDNS_I2C_IXR_DATA)
+ cdns_i2c_slave_rcv_data(id);
+
+ if (isr_status & CDNS_I2C_IXR_COMP) {
+ cdns_i2c_slave_rcv_data(id);
+ id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+ i2c_slave_event(id->slave, I2C_SLAVE_STOP, NULL);
+ }
+ }
+
+ /* Master indicated xfer stop or fifo underflow/overflow */
+ if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_RX_OVF |
+ CDNS_I2C_IXR_RX_UNF | CDNS_I2C_IXR_TX_OVF)) {
+ id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+ i2c_slave_event(id->slave, I2C_SLAVE_STOP, NULL);
+ cdns_i2c_writereg(CDNS_I2C_CR_CLR_FIFO, CDNS_I2C_CR_OFFSET);
+ }
+
+ return IRQ_HANDLED;
+}
+#endif
+
+/**
+ * cdns_i2c_master_isr - Interrupt handler for the I2C device in master role
+ * @ptr: Pointer to I2C device private data
+ *
+ * This function handles the data interrupt, transfer complete interrupt and
+ * the error interrupts of the I2C device in master role.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_master_isr(void *ptr)
+{
+ unsigned int isr_status, avail_bytes;
+ unsigned int bytes_to_send;
+ bool updatetx;
+ struct cdns_i2c *id = ptr;
+ /* Signal completion only after everything is updated */
+ int done_flag = 0;
+ irqreturn_t status = IRQ_NONE;
+
+ isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+ cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+ id->err_status = 0;
+
+ /* Handling nack and arbitration lost interrupt */
+ if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_ARB_LOST)) {
+ done_flag = 1;
+ status = IRQ_HANDLED;
+ }
+
+ /*
+ * Check if transfer size register needs to be updated again for a
+ * large data receive operation.
+ */
+ updatetx = id->recv_count > id->curr_recv_count;
+
+ /* When receiving, handle data interrupt and completion interrupt */
+ if (id->p_recv_buf &&
+ ((isr_status & CDNS_I2C_IXR_COMP) ||
+ (isr_status & CDNS_I2C_IXR_DATA))) {
+ /* Read data if receive data valid is set */
+ while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) &
+ CDNS_I2C_SR_RXDV) {
+ if (id->recv_count > 0) {
+ *(id->p_recv_buf)++ =
+ cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+ id->recv_count--;
+ id->curr_recv_count--;
+
+ /*
+ * Clear hold bit that was set for FIFO control
+ * if RX data left is less than or equal to
+ * FIFO DEPTH unless repeated start is selected
+ */
+ if (id->recv_count <= id->fifo_depth &&
+ !id->bus_hold_flag)
+ cdns_i2c_clear_bus_hold(id);
+
+ } else {
+ dev_err(id->adap.dev.parent,
+ "xfer_size reg rollover. xfer aborted!\n");
+ id->err_status |= CDNS_I2C_IXR_TO;
+ break;
+ }
+
+ if (cdns_is_holdquirk(id, updatetx))
+ break;
+ }
+
+ /*
+ * The controller sends NACK to the slave when transfer size
+ * register reaches zero without considering the HOLD bit.
+ * This workaround is implemented for large data transfers to
+ * maintain transfer size non-zero while performing a large
+ * receive operation.
+ */
+ if (cdns_is_holdquirk(id, updatetx)) {
+ /* wait while fifo is full */
+ while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) !=
+ (id->curr_recv_count - id->fifo_depth))
+ ;
+
+ /*
+ * Check number of bytes to be received against maximum
+ * transfer size and update register accordingly.
+ */
+ if (((int)(id->recv_count) - id->fifo_depth) >
+ id->transfer_size) {
+ cdns_i2c_writereg(id->transfer_size,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ id->curr_recv_count = id->transfer_size +
+ id->fifo_depth;
+ } else {
+ cdns_i2c_writereg(id->recv_count -
+ id->fifo_depth,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ id->curr_recv_count = id->recv_count;
+ }
+ }
+
+ /* Clear hold (if not repeated start) and signal completion */
+ if ((isr_status & CDNS_I2C_IXR_COMP) && !id->recv_count) {
+ if (!id->bus_hold_flag)
+ cdns_i2c_clear_bus_hold(id);
+ done_flag = 1;
+ }
+
+ status = IRQ_HANDLED;
+ }
+
+ /* When sending, handle transfer complete interrupt */
+ if ((isr_status & CDNS_I2C_IXR_COMP) && !id->p_recv_buf) {
+ /*
+ * If there is more data to be sent, calculate the
+ * space available in FIFO and fill with that many bytes.
+ */
+ if (id->send_count) {
+ avail_bytes = id->fifo_depth -
+ cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+ if (id->send_count > avail_bytes)
+ bytes_to_send = avail_bytes;
+ else
+ bytes_to_send = id->send_count;
+
+ while (bytes_to_send--) {
+ cdns_i2c_writereg(
+ (*(id->p_send_buf)++),
+ CDNS_I2C_DATA_OFFSET);
+ id->send_count--;
+ }
+ } else {
+ /*
+ * Signal the completion of transaction and
+ * clear the hold bus bit if there are no
+ * further messages to be processed.
+ */
+ done_flag = 1;
+ }
+ if (!id->send_count && !id->bus_hold_flag)
+ cdns_i2c_clear_bus_hold(id);
+
+ status = IRQ_HANDLED;
+ }
+
+ /* Update the status for errors */
+ id->err_status |= isr_status & CDNS_I2C_IXR_ERR_INTR_MASK;
+ if (id->err_status)
+ status = IRQ_HANDLED;
+
+ if (done_flag)
+ complete(&id->xfer_done);
+
+ return status;
+}
+
+/**
+ * cdns_i2c_isr - Interrupt handler for the I2C device
+ * @irq: irq number for the I2C device
+ * @ptr: void pointer to cdns_i2c structure
+ *
+ * This function passes the control to slave/master based on current role of
+ * i2c controller.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
+{
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ struct cdns_i2c *id = ptr;
+
+ if (id->dev_mode == CDNS_I2C_MODE_SLAVE)
+ return cdns_i2c_slave_isr(ptr);
+#endif
+ return cdns_i2c_master_isr(ptr);
+}
+
+/**
+ * cdns_i2c_mrecv - Prepare and start a master receive operation
+ * @id: pointer to the i2c device structure
+ */
+static void cdns_i2c_mrecv(struct cdns_i2c *id)
+{
+ unsigned int ctrl_reg;
+ unsigned int isr_status;
+ unsigned long flags;
+ bool hold_clear = false;
+ bool irq_save = false;
+
+ u32 addr;
+
+ id->p_recv_buf = id->p_msg->buf;
+ id->recv_count = id->p_msg->len;
+
+ /* Put the controller in master receive mode and clear the FIFO */
+ ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ ctrl_reg |= CDNS_I2C_CR_RW | CDNS_I2C_CR_CLR_FIFO;
+
+ /*
+ * Receive up to I2C_SMBUS_BLOCK_MAX data bytes, plus one message length
+ * byte, plus one checksum byte if PEC is enabled. p_msg->len will be 2 if
+ * PEC is enabled, otherwise 1.
+ */
+ if (id->p_msg->flags & I2C_M_RECV_LEN)
+ id->recv_count = I2C_SMBUS_BLOCK_MAX + id->p_msg->len;
+
+ id->curr_recv_count = id->recv_count;
+
+ /*
+ * Check for the message size against FIFO depth and set the
+ * 'hold bus' bit if it is greater than FIFO depth.
+ */
+ if (id->recv_count > id->fifo_depth)
+ ctrl_reg |= CDNS_I2C_CR_HOLD;
+
+ cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+ /* Clear the interrupts in interrupt status register */
+ isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+ cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+ /*
+ * The no. of bytes to receive is checked against the limit of
+ * max transfer size. Set transfer size register with no of bytes
+ * receive if it is less than transfer size and transfer size if
+ * it is more. Enable the interrupts.
+ */
+ if (id->recv_count > id->transfer_size) {
+ cdns_i2c_writereg(id->transfer_size,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ id->curr_recv_count = id->transfer_size;
+ } else {
+ cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
+ }
+
+ /* Determine hold_clear based on number of bytes to receive and hold flag */
+ if (!id->bus_hold_flag && id->recv_count <= id->fifo_depth) {
+ if (ctrl_reg & CDNS_I2C_CR_HOLD) {
+ hold_clear = true;
+ if (id->quirks & CDNS_I2C_BROKEN_HOLD_BIT)
+ irq_save = true;
+ }
+ }
+
+ addr = id->p_msg->addr;
+ addr &= CDNS_I2C_ADDR_MASK;
+
+ if (hold_clear) {
+ ctrl_reg &= ~CDNS_I2C_CR_HOLD;
+ /*
+ * In case of Xilinx Zynq SOC, clear the HOLD bit before transfer size
+ * register reaches '0'. This is an IP bug which causes transfer size
+ * register overflow to 0xFF. To satisfy this timing requirement,
+ * disable the interrupts on current processor core between register
+ * writes to slave address register and control register.
+ */
+ if (irq_save)
+ local_irq_save(flags);
+
+ cdns_i2c_writereg(addr, CDNS_I2C_ADDR_OFFSET);
+ cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+ /* Read it back to avoid bufferring and make sure write happens */
+ cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+
+ if (irq_save)
+ local_irq_restore(flags);
+ } else {
+ cdns_i2c_writereg(addr, CDNS_I2C_ADDR_OFFSET);
+ }
+
+ cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
+}
+
+/**
+ * cdns_i2c_msend - Prepare and start a master send operation
+ * @id: pointer to the i2c device
+ */
+static void cdns_i2c_msend(struct cdns_i2c *id)
+{
+ unsigned int avail_bytes;
+ unsigned int bytes_to_send;
+ unsigned int ctrl_reg;
+ unsigned int isr_status;
+
+ id->p_recv_buf = NULL;
+ id->p_send_buf = id->p_msg->buf;
+ id->send_count = id->p_msg->len;
+
+ /* Set the controller in Master transmit mode and clear the FIFO. */
+ ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ ctrl_reg &= ~CDNS_I2C_CR_RW;
+ ctrl_reg |= CDNS_I2C_CR_CLR_FIFO;
+
+ /*
+ * Check for the message size against FIFO depth and set the
+ * 'hold bus' bit if it is greater than FIFO depth.
+ */
+ if (id->send_count > id->fifo_depth)
+ ctrl_reg |= CDNS_I2C_CR_HOLD;
+ cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+ /* Clear the interrupts in interrupt status register. */
+ isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+ cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+ /*
+ * Calculate the space available in FIFO. Check the message length
+ * against the space available, and fill the FIFO accordingly.
+ * Enable the interrupts.
+ */
+ avail_bytes = id->fifo_depth -
+ cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+
+ if (id->send_count > avail_bytes)
+ bytes_to_send = avail_bytes;
+ else
+ bytes_to_send = id->send_count;
+
+ while (bytes_to_send--) {
+ cdns_i2c_writereg((*(id->p_send_buf)++), CDNS_I2C_DATA_OFFSET);
+ id->send_count--;
+ }
+
+ /*
+ * Clear the bus hold flag if there is no more data
+ * and if it is the last message.
+ */
+ if (!id->bus_hold_flag && !id->send_count)
+ cdns_i2c_clear_bus_hold(id);
+ /* Set the slave address in address register - triggers operation. */
+ cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+ CDNS_I2C_ADDR_OFFSET);
+
+ cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
+}
+
+/**
+ * cdns_i2c_master_reset - Reset the interface
+ * @adap: pointer to the i2c adapter driver instance
+ *
+ * This function cleanup the fifos, clear the hold bit and status
+ * and disable the interrupts.
+ */
+static void cdns_i2c_master_reset(struct i2c_adapter *adap)
+{
+ struct cdns_i2c *id = adap->algo_data;
+ u32 regval;
+
+ /* Disable the interrupts */
+ cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK, CDNS_I2C_IDR_OFFSET);
+ /* Clear the hold bit and fifos */
+ regval = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ regval &= ~CDNS_I2C_CR_HOLD;
+ regval |= CDNS_I2C_CR_CLR_FIFO;
+ cdns_i2c_writereg(regval, CDNS_I2C_CR_OFFSET);
+ /* Update the transfercount register to zero */
+ cdns_i2c_writereg(0, CDNS_I2C_XFER_SIZE_OFFSET);
+ /* Clear the interrupt status register */
+ regval = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+ cdns_i2c_writereg(regval, CDNS_I2C_ISR_OFFSET);
+ /* Clear the status register */
+ regval = cdns_i2c_readreg(CDNS_I2C_SR_OFFSET);
+ cdns_i2c_writereg(regval, CDNS_I2C_SR_OFFSET);
+}
+
+static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
+ struct i2c_adapter *adap)
+{
+ unsigned long time_left, msg_timeout;
+ u32 reg;
+
+ id->p_msg = msg;
+ id->err_status = 0;
+ reinit_completion(&id->xfer_done);
+
+ /* Check for the TEN Bit mode on each msg */
+ reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ if (msg->flags & I2C_M_TEN) {
+ if (reg & CDNS_I2C_CR_NEA)
+ cdns_i2c_writereg(reg & ~CDNS_I2C_CR_NEA,
+ CDNS_I2C_CR_OFFSET);
+ } else {
+ if (!(reg & CDNS_I2C_CR_NEA))
+ cdns_i2c_writereg(reg | CDNS_I2C_CR_NEA,
+ CDNS_I2C_CR_OFFSET);
+ }
+
+ /* Check for the R/W flag on each msg */
+ if (msg->flags & I2C_M_RD)
+ cdns_i2c_mrecv(id);
+ else
+ cdns_i2c_msend(id);
+
+ /* Minimal time to execute this message */
+ msg_timeout = msecs_to_jiffies((1000 * msg->len * BITS_PER_BYTE) / id->i2c_clk);
+ /* Plus some wiggle room */
+ msg_timeout += msecs_to_jiffies(500);
+
+ if (msg_timeout < adap->timeout)
+ msg_timeout = adap->timeout;
+
+ /* Wait for the signal of completion */
+ time_left = wait_for_completion_timeout(&id->xfer_done, msg_timeout);
+ if (time_left == 0) {
+ cdns_i2c_master_reset(adap);
+ dev_err(id->adap.dev.parent,
+ "timeout waiting on completion\n");
+ return -ETIMEDOUT;
+ }
+
+ cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK,
+ CDNS_I2C_IDR_OFFSET);
+
+ /* If it is bus arbitration error, try again */
+ if (id->err_status & CDNS_I2C_IXR_ARB_LOST)
+ return -EAGAIN;
+
+ if (msg->flags & I2C_M_RECV_LEN)
+ msg->len += min_t(unsigned int, msg->buf[0], I2C_SMBUS_BLOCK_MAX);
+
+ return 0;
+}
+
+/**
+ * cdns_i2c_master_xfer - The main i2c transfer function
+ * @adap: pointer to the i2c adapter driver instance
+ * @msgs: pointer to the i2c message structure
+ * @num: the number of messages to transfer
+ *
+ * Initiates the send/recv activity based on the transfer message received.
+ *
+ * Return: number of msgs processed on success, negative error otherwise
+ */
+static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ int ret, count;
+ u32 reg;
+ struct cdns_i2c *id = adap->algo_data;
+ bool hold_quirk;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ bool change_role = false;
+#endif
+
+ ret = pm_runtime_resume_and_get(id->dev);
+ if (ret < 0)
+ return ret;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ /* Check i2c operating mode and switch if possible */
+ if (id->dev_mode == CDNS_I2C_MODE_SLAVE) {
+ if (id->slave_state != CDNS_I2C_SLAVE_STATE_IDLE) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ /* Set mode to master */
+ cdns_i2c_set_mode(CDNS_I2C_MODE_MASTER, id);
+
+ /* Mark flag to change role once xfer is completed */
+ change_role = true;
+ }
+#endif
+
+ /* Check if the bus is free */
+
+ ret = readl_relaxed_poll_timeout(id->membase + CDNS_I2C_SR_OFFSET,
+ reg,
+ !(reg & CDNS_I2C_SR_BA),
+ CDNS_I2C_POLL_US, CDNS_I2C_TIMEOUT_US);
+ if (ret) {
+ ret = -EAGAIN;
+ if (id->adap.bus_recovery_info)
+ i2c_recover_bus(adap);
+ goto out;
+ }
+
+ hold_quirk = !!(id->quirks & CDNS_I2C_BROKEN_HOLD_BIT);
+ /*
+ * Set the flag to one when multiple messages are to be
+ * processed with a repeated start.
+ */
+ if (num > 1) {
+ /*
+ * This controller does not give completion interrupt after a
+ * master receive message if HOLD bit is set (repeated start),
+ * resulting in SW timeout. Hence, if a receive message is
+ * followed by any other message, an error is returned
+ * indicating that this sequence is not supported.
+ */
+ for (count = 0; (count < num - 1 && hold_quirk); count++) {
+ if (msgs[count].flags & I2C_M_RD) {
+ dev_warn(adap->dev.parent,
+ "Can't do repeated start after a receive message\n");
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+ }
+ id->bus_hold_flag = 1;
+ reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ reg |= CDNS_I2C_CR_HOLD;
+ cdns_i2c_writereg(reg, CDNS_I2C_CR_OFFSET);
+ } else {
+ id->bus_hold_flag = 0;
+ }
+
+ /* Process the msg one by one */
+ for (count = 0; count < num; count++, msgs++) {
+ if (count == (num - 1))
+ id->bus_hold_flag = 0;
+
+ ret = cdns_i2c_process_msg(id, msgs, adap);
+ if (ret)
+ goto out;
+
+ /* Report the other error interrupts to application */
+ if (id->err_status) {
+ cdns_i2c_master_reset(adap);
+
+ if (id->err_status & CDNS_I2C_IXR_NACK) {
+ ret = -ENXIO;
+ goto out;
+ }
+ ret = -EIO;
+ goto out;
+ }
+ }
+
+ ret = num;
+
+out:
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ /* Switch i2c mode to slave */
+ if (change_role)
+ cdns_i2c_set_mode(CDNS_I2C_MODE_SLAVE, id);
+#endif
+
+ pm_runtime_mark_last_busy(id->dev);
+ pm_runtime_put_autosuspend(id->dev);
+ return ret;
+}
+
+/**
+ * cdns_i2c_func - Returns the supported features of the I2C driver
+ * @adap: pointer to the i2c adapter structure
+ *
+ * Return: 32 bit value, each bit corresponding to a feature
+ */
+static u32 cdns_i2c_func(struct i2c_adapter *adap)
+{
+ u32 func = I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+ (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+ I2C_FUNC_SMBUS_BLOCK_DATA;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ func |= I2C_FUNC_SLAVE;
+#endif
+
+ return func;
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static int cdns_reg_slave(struct i2c_client *slave)
+{
+ int ret;
+ struct cdns_i2c *id = container_of(slave->adapter, struct cdns_i2c,
+ adap);
+
+ if (id->slave)
+ return -EBUSY;
+
+ if (slave->flags & I2C_CLIENT_TEN)
+ return -EAFNOSUPPORT;
+
+ ret = pm_runtime_resume_and_get(id->dev);
+ if (ret < 0)
+ return ret;
+
+ /* Store slave information */
+ id->slave = slave;
+
+ /* Enable I2C slave */
+ cdns_i2c_set_mode(CDNS_I2C_MODE_SLAVE, id);
+
+ return 0;
+}
+
+static int cdns_unreg_slave(struct i2c_client *slave)
+{
+ struct cdns_i2c *id = container_of(slave->adapter, struct cdns_i2c,
+ adap);
+
+ pm_runtime_put(id->dev);
+
+ /* Remove slave information */
+ id->slave = NULL;
+
+ /* Enable I2C master */
+ cdns_i2c_set_mode(CDNS_I2C_MODE_MASTER, id);
+
+ return 0;
+}
+#endif
+
+static const struct i2c_algorithm cdns_i2c_algo = {
+ .master_xfer = cdns_i2c_master_xfer,
+ .functionality = cdns_i2c_func,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ .reg_slave = cdns_reg_slave,
+ .unreg_slave = cdns_unreg_slave,
+#endif
+};
+
+/**
+ * cdns_i2c_calc_divs - Calculate clock dividers
+ * @f: I2C clock frequency
+ * @input_clk: Input clock frequency
+ * @a: First divider (return value)
+ * @b: Second divider (return value)
+ *
+ * f is used as input and output variable. As input it is used as target I2C
+ * frequency. On function exit f holds the actually resulting I2C frequency.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_i2c_calc_divs(unsigned long *f, unsigned long input_clk,
+ unsigned int *a, unsigned int *b)
+{
+ unsigned long fscl = *f, best_fscl = *f, actual_fscl, temp;
+ unsigned int div_a, div_b, calc_div_a = 0, calc_div_b = 0;
+ unsigned int last_error, current_error;
+
+ /* calculate (divisor_a+1) x (divisor_b+1) */
+ temp = input_clk / (22 * fscl);
+
+ /*
+ * If the calculated value is negative or 0, the fscl input is out of
+ * range. Return error.
+ */
+ if (!temp || (temp > (CDNS_I2C_DIVA_MAX * CDNS_I2C_DIVB_MAX)))
+ return -EINVAL;
+
+ last_error = -1;
+ for (div_a = 0; div_a < CDNS_I2C_DIVA_MAX; div_a++) {
+ div_b = DIV_ROUND_UP(input_clk, 22 * fscl * (div_a + 1));
+
+ if ((div_b < 1) || (div_b > CDNS_I2C_DIVB_MAX))
+ continue;
+ div_b--;
+
+ actual_fscl = input_clk / (22 * (div_a + 1) * (div_b + 1));
+
+ if (actual_fscl > fscl)
+ continue;
+
+ current_error = fscl - actual_fscl;
+
+ if (last_error > current_error) {
+ calc_div_a = div_a;
+ calc_div_b = div_b;
+ best_fscl = actual_fscl;
+ last_error = current_error;
+ }
+ }
+
+ *a = calc_div_a;
+ *b = calc_div_b;
+ *f = best_fscl;
+
+ return 0;
+}
+
+/**
+ * cdns_i2c_setclk - This function sets the serial clock rate for the I2C device
+ * @clk_in: I2C clock input frequency in Hz
+ * @id: Pointer to the I2C device structure
+ *
+ * The device must be idle rather than busy transferring data before setting
+ * these device options.
+ * The data rate is set by values in the control register.
+ * The formula for determining the correct register values is
+ * Fscl = Fpclk/(22 x (divisor_a+1) x (divisor_b+1))
+ * See the hardware data sheet for a full explanation of setting the serial
+ * clock rate. The clock can not be faster than the input clock divide by 22.
+ * The two most common clock rates are 100KHz and 400KHz.
+ *
+ * Return: 0 on success, negative error otherwise
+ */
+static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
+{
+ unsigned int div_a, div_b;
+ unsigned int ctrl_reg;
+ int ret = 0;
+ unsigned long fscl = id->i2c_clk;
+
+ ret = cdns_i2c_calc_divs(&fscl, clk_in, &div_a, &div_b);
+ if (ret)
+ return ret;
+
+ ctrl_reg = id->ctrl_reg;
+ ctrl_reg &= ~(CDNS_I2C_CR_DIVA_MASK | CDNS_I2C_CR_DIVB_MASK);
+ ctrl_reg |= ((div_a << CDNS_I2C_CR_DIVA_SHIFT) |
+ (div_b << CDNS_I2C_CR_DIVB_SHIFT));
+ id->ctrl_reg = ctrl_reg;
+ cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ id->ctrl_reg_diva_divb = ctrl_reg & (CDNS_I2C_CR_DIVA_MASK |
+ CDNS_I2C_CR_DIVB_MASK);
+#endif
+ return 0;
+}
+
+/**
+ * cdns_i2c_clk_notifier_cb - Clock rate change callback
+ * @nb: Pointer to notifier block
+ * @event: Notification reason
+ * @data: Pointer to notification data object
+ *
+ * This function is called when the cdns_i2c input clock frequency changes.
+ * The callback checks whether a valid bus frequency can be generated after the
+ * change. If so, the change is acknowledged, otherwise the change is aborted.
+ * New dividers are written to the HW in the pre- or post change notification
+ * depending on the scaling direction.
+ *
+ * Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK
+ * to acknowledge the change, NOTIFY_DONE if the notification is
+ * considered irrelevant.
+ */
+static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
+ event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct cdns_i2c *id = to_cdns_i2c(nb);
+
+ if (pm_runtime_suspended(id->dev))
+ return NOTIFY_OK;
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ {
+ unsigned long input_clk = ndata->new_rate;
+ unsigned long fscl = id->i2c_clk;
+ unsigned int div_a, div_b;
+ int ret;
+
+ ret = cdns_i2c_calc_divs(&fscl, input_clk, &div_a, &div_b);
+ if (ret) {
+ dev_warn(id->adap.dev.parent,
+ "clock rate change rejected\n");
+ return NOTIFY_STOP;
+ }
+
+ /* scale up */
+ if (ndata->new_rate > ndata->old_rate)
+ cdns_i2c_setclk(ndata->new_rate, id);
+
+ return NOTIFY_OK;
+ }
+ case POST_RATE_CHANGE:
+ id->input_clk = ndata->new_rate;
+ /* scale down */
+ if (ndata->new_rate < ndata->old_rate)
+ cdns_i2c_setclk(ndata->new_rate, id);
+ return NOTIFY_OK;
+ case ABORT_RATE_CHANGE:
+ /* scale up */
+ if (ndata->new_rate > ndata->old_rate)
+ cdns_i2c_setclk(ndata->old_rate, id);
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+/**
+ * cdns_i2c_runtime_suspend - Runtime suspend method for the driver
+ * @dev: Address of the platform_device structure
+ *
+ * Put the driver into low power mode.
+ *
+ * Return: 0 always
+ */
+static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
+{
+ struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+
+ clk_disable(xi2c->clk);
+
+ return 0;
+}
+
+/**
+ * cdns_i2c_init - Controller initialisation
+ * @id: Device private data structure
+ *
+ * Initialise the i2c controller.
+ *
+ */
+static void cdns_i2c_init(struct cdns_i2c *id)
+{
+ cdns_i2c_writereg(id->ctrl_reg, CDNS_I2C_CR_OFFSET);
+ /*
+ * Cadence I2C controller has a bug wherein it generates
+ * invalid read transaction after HW timeout in master receiver mode.
+ * HW timeout is not used by this driver and the interrupt is disabled.
+ * But the feature itself cannot be disabled. Hence maximum value
+ * is written to this register to reduce the chances of error.
+ */
+ cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
+}
+
+/**
+ * cdns_i2c_runtime_resume - Runtime resume
+ * @dev: Address of the platform_device structure
+ *
+ * Runtime resume callback.
+ *
+ * Return: 0 on success and error value on error
+ */
+static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
+{
+ struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_enable(xi2c->clk);
+ if (ret) {
+ dev_err(dev, "Cannot enable clock.\n");
+ return ret;
+ }
+ cdns_i2c_init(xi2c);
+
+ return 0;
+}
+
+static const struct dev_pm_ops cdns_i2c_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend,
+ cdns_i2c_runtime_resume, NULL)
+};
+
+static const struct cdns_platform_data r1p10_i2c_def = {
+ .quirks = CDNS_I2C_BROKEN_HOLD_BIT,
+};
+
+static const struct of_device_id cdns_i2c_of_match[] = {
+ { .compatible = "cdns,i2c-r1p10", .data = &r1p10_i2c_def },
+ { .compatible = "cdns,i2c-r1p14",},
+ { /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
+
+/**
+ * cdns_i2c_detect_transfer_size - Detect the maximum transfer size supported
+ * @id: Device private data structure
+ *
+ * Detect the maximum transfer size that is supported by this instance of the
+ * Cadence I2C controller.
+ */
+static void cdns_i2c_detect_transfer_size(struct cdns_i2c *id)
+{
+ u32 val;
+
+ /*
+ * Writing to the transfer size register is only possible if these two bits
+ * are set in the control register.
+ */
+ cdns_i2c_writereg(CDNS_I2C_CR_MS | CDNS_I2C_CR_RW, CDNS_I2C_CR_OFFSET);
+
+ /*
+ * The number of writable bits of the transfer size register can be between
+ * 4 and 8. This is a controlled through a synthesis parameter of the IP
+ * core and can vary from instance to instance. The unused MSBs always read
+ * back as 0. Writing 0xff and then reading the value back will report the
+ * maximum supported transfer size.
+ */
+ cdns_i2c_writereg(CDNS_I2C_MAX_TRANSFER_SIZE, CDNS_I2C_XFER_SIZE_OFFSET);
+ val = cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+ id->transfer_size = CDNS_I2C_TRANSFER_SIZE(val);
+ cdns_i2c_writereg(0, CDNS_I2C_XFER_SIZE_OFFSET);
+ cdns_i2c_writereg(0, CDNS_I2C_CR_OFFSET);
+}
+
+/**
+ * cdns_i2c_probe - Platform registration call
+ * @pdev: Handle to the platform device structure
+ *
+ * This function does all the memory allocation and registration for the i2c
+ * device. User can modify the address mode to 10 bit address mode using the
+ * ioctl call with option I2C_TENBIT.
+ *
+ * Return: 0 on success, negative error otherwise
+ */
+static int cdns_i2c_probe(struct platform_device *pdev)
+{
+ struct resource *r_mem;
+ struct cdns_i2c *id;
+ int ret, irq;
+ const struct of_device_id *match;
+
+ id = devm_kzalloc(&pdev->dev, sizeof(*id), GFP_KERNEL);
+ if (!id)
+ return -ENOMEM;
+
+ id->dev = &pdev->dev;
+ platform_set_drvdata(pdev, id);
+
+ match = of_match_node(cdns_i2c_of_match, pdev->dev.of_node);
+ if (match && match->data) {
+ const struct cdns_platform_data *data = match->data;
+ id->quirks = data->quirks;
+ }
+
+ id->rinfo.pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (IS_ERR(id->rinfo.pinctrl)) {
+ int err = PTR_ERR(id->rinfo.pinctrl);
+
+ dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
+ if (err != -ENODEV)
+ return err;
+ } else {
+ id->adap.bus_recovery_info = &id->rinfo;
+ }
+
+ id->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &r_mem);
+ if (IS_ERR(id->membase))
+ return PTR_ERR(id->membase);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ id->adap.owner = THIS_MODULE;
+ id->adap.dev.of_node = pdev->dev.of_node;
+ id->adap.algo = &cdns_i2c_algo;
+ id->adap.timeout = CDNS_I2C_TIMEOUT;
+ id->adap.retries = 3; /* Default retry value. */
+ id->adap.algo_data = id;
+ id->adap.dev.parent = &pdev->dev;
+ init_completion(&id->xfer_done);
+ snprintf(id->adap.name, sizeof(id->adap.name),
+ "Cadence I2C at %08lx", (unsigned long)r_mem->start);
+
+ id->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(id->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(id->clk),
+ "input clock not found.\n");
+
+ id->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+ if (IS_ERR(id->reset))
+ return dev_err_probe(&pdev->dev, PTR_ERR(id->reset),
+ "Failed to request reset.\n");
+
+ ret = clk_prepare_enable(id->clk);
+ if (ret)
+ dev_err(&pdev->dev, "Unable to enable clock.\n");
+
+ ret = reset_control_deassert(id->reset);
+ if (ret) {
+ dev_err_probe(&pdev->dev, ret,
+ "Failed to de-assert reset.\n");
+ goto err_clk_dis;
+ }
+
+ pm_runtime_set_autosuspend_delay(id->dev, CNDS_I2C_PM_TIMEOUT);
+ pm_runtime_use_autosuspend(id->dev);
+ pm_runtime_set_active(id->dev);
+ pm_runtime_enable(id->dev);
+
+ id->clk_rate_change_nb.notifier_call = cdns_i2c_clk_notifier_cb;
+ if (clk_notifier_register(id->clk, &id->clk_rate_change_nb))
+ dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
+ id->input_clk = clk_get_rate(id->clk);
+
+ ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &id->i2c_clk);
+ if (ret || (id->i2c_clk > I2C_MAX_FAST_MODE_FREQ))
+ id->i2c_clk = I2C_MAX_STANDARD_MODE_FREQ;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ /* Set initial mode to master */
+ id->dev_mode = CDNS_I2C_MODE_MASTER;
+ id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+#endif
+ id->ctrl_reg = CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS;
+
+ id->fifo_depth = CDNS_I2C_FIFO_DEPTH_DEFAULT;
+ of_property_read_u32(pdev->dev.of_node, "fifo-depth", &id->fifo_depth);
+
+ cdns_i2c_detect_transfer_size(id);
+
+ ret = cdns_i2c_setclk(id->input_clk, id);
+ if (ret) {
+ dev_err(&pdev->dev, "invalid SCL clock: %u Hz\n", id->i2c_clk);
+ ret = -EINVAL;
+ goto err_clk_notifier_unregister;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, cdns_i2c_isr, 0,
+ DRIVER_NAME, id);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot get irq %d\n", irq);
+ goto err_clk_notifier_unregister;
+ }
+ cdns_i2c_init(id);
+
+ ret = i2c_add_adapter(&id->adap);
+ if (ret < 0)
+ goto err_clk_notifier_unregister;
+
+ dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
+ id->i2c_clk / 1000, (unsigned long)r_mem->start, irq);
+
+ return 0;
+
+err_clk_notifier_unregister:
+ clk_notifier_unregister(id->clk, &id->clk_rate_change_nb);
+ reset_control_assert(id->reset);
+err_clk_dis:
+ clk_disable_unprepare(id->clk);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ return ret;
+}
+
+/**
+ * cdns_i2c_remove - Unregister the device after releasing the resources
+ * @pdev: Handle to the platform device structure
+ *
+ * This function frees all the resources allocated to the device.
+ *
+ * Return: 0 always
+ */
+static void cdns_i2c_remove(struct platform_device *pdev)
+{
+ struct cdns_i2c *id = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+
+ i2c_del_adapter(&id->adap);
+ clk_notifier_unregister(id->clk, &id->clk_rate_change_nb);
+ reset_control_assert(id->reset);
+ clk_disable_unprepare(id->clk);
+}
+
+static struct platform_driver cdns_i2c_drv = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = cdns_i2c_of_match,
+ .pm = &cdns_i2c_dev_pm_ops,
+ },
+ .probe = cdns_i2c_probe,
+ .remove_new = cdns_i2c_remove,
+};
+
+module_platform_driver(cdns_i2c_drv);
+
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_DESCRIPTION("Cadence I2C bus driver");
+MODULE_LICENSE("GPL");