diff options
Diffstat (limited to 'drivers/i3c/master/mipi-i3c-hci/xfer_mode_rate.h')
-rw-r--r-- | drivers/i3c/master/mipi-i3c-hci/xfer_mode_rate.h | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/drivers/i3c/master/mipi-i3c-hci/xfer_mode_rate.h b/drivers/i3c/master/mipi-i3c-hci/xfer_mode_rate.h new file mode 100644 index 0000000000..1e36b75afb --- /dev/null +++ b/drivers/i3c/master/mipi-i3c-hci/xfer_mode_rate.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* + * Copyright (c) 2020, MIPI Alliance, Inc. + * + * Author: Nicolas Pitre <npitre@baylibre.com> + * + * Transfer Mode/Rate Table definitions as found in extended capability + * sections 0x04 and 0x08. + * This applies starting from I3C HCI v2.0. + */ + +#ifndef XFER_MODE_RATE_H +#define XFER_MODE_RATE_H + +/* + * Master Transfer Mode Table Fixed Indexes. + * + * Indexes 0x0 and 0x8 are mandatory. Availability for the rest must be + * obtained from the mode table in the extended capability area. + * Presence and definitions for indexes beyond these ones may vary. + */ +#define XFERMODE_IDX_I3C_SDR 0x00 /* I3C SDR Mode */ +#define XFERMODE_IDX_I3C_HDR_DDR 0x01 /* I3C HDR-DDR Mode */ +#define XFERMODE_IDX_I3C_HDR_T 0x02 /* I3C HDR-Ternary Mode */ +#define XFERMODE_IDX_I3C_HDR_BT 0x03 /* I3C HDR-BT Mode */ +#define XFERMODE_IDX_I2C 0x08 /* Legacy I2C Mode */ + +/* + * Transfer Mode Table Entry Bits Definitions + */ +#define XFERMODE_VALID_XFER_ADD_FUNC GENMASK(21, 16) +#define XFERMODE_ML_DATA_XFER_CODING GENMASK(15, 11) +#define XFERMODE_ML_ADDL_LANES GENMASK(10, 8) +#define XFERMODE_SUPPORTED BIT(7) +#define XFERMODE_MODE GENMASK(3, 0) + +/* + * Master Data Transfer Rate Selector Values. + * + * These are the values to be used in the command descriptor XFER_RATE field + * and found in the RATE_ID field below. + * The I3C_SDR0, I3C_SDR1, I3C_SDR2, I3C_SDR3, I3C_SDR4 and I2C_FM rates + * are required, everything else is optional and discoverable in the + * Data Transfer Rate Table. Indicated are typical rates. The actual + * rates may vary slightly and are also specified in the Data Transfer + * Rate Table. + */ +#define XFERRATE_I3C_SDR0 0x00 /* 12.5 MHz */ +#define XFERRATE_I3C_SDR1 0x01 /* 8 MHz */ +#define XFERRATE_I3C_SDR2 0x02 /* 6 MHz */ +#define XFERRATE_I3C_SDR3 0x03 /* 4 MHz */ +#define XFERRATE_I3C_SDR4 0x04 /* 2 MHz */ +#define XFERRATE_I3C_SDR_FM_FMP 0x05 /* 400 KHz / 1 MHz */ +#define XFERRATE_I3C_SDR_USER6 0x06 /* User Defined */ +#define XFERRATE_I3C_SDR_USER7 0x07 /* User Defined */ + +#define XFERRATE_I2C_FM 0x00 /* 400 KHz */ +#define XFERRATE_I2C_FMP 0x01 /* 1 MHz */ +#define XFERRATE_I2C_USER2 0x02 /* User Defined */ +#define XFERRATE_I2C_USER3 0x03 /* User Defined */ +#define XFERRATE_I2C_USER4 0x04 /* User Defined */ +#define XFERRATE_I2C_USER5 0x05 /* User Defined */ +#define XFERRATE_I2C_USER6 0x06 /* User Defined */ +#define XFERRATE_I2C_USER7 0x07 /* User Defined */ + +/* + * Master Data Transfer Rate Table Mode ID values. + */ +#define XFERRATE_MODE_I3C 0x00 +#define XFERRATE_MODE_I2C 0x08 + +/* + * Master Data Transfer Rate Table Entry Bits Definitions + */ +#define XFERRATE_MODE_ID GENMASK(31, 28) +#define XFERRATE_RATE_ID GENMASK(22, 20) +#define XFERRATE_ACTUAL_RATE_KHZ GENMASK(19, 0) + +#endif |