diff options
Diffstat (limited to 'drivers/iio/accel/bmc150-accel-core.c')
-rw-r--r-- | drivers/iio/accel/bmc150-accel-core.c | 1906 |
1 files changed, 1906 insertions, 0 deletions
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c new file mode 100644 index 0000000000..110591804b --- /dev/null +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -0,0 +1,1906 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * 3-axis accelerometer driver supporting many Bosch-Sensortec chips + * Copyright (c) 2014, Intel Corporation. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/of_irq.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/events.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#include "bmc150-accel.h" + +#define BMC150_ACCEL_DRV_NAME "bmc150_accel" +#define BMC150_ACCEL_IRQ_NAME "bmc150_accel_event" + +#define BMC150_ACCEL_REG_CHIP_ID 0x00 + +#define BMC150_ACCEL_REG_INT_STATUS_2 0x0B +#define BMC150_ACCEL_ANY_MOTION_MASK 0x07 +#define BMC150_ACCEL_ANY_MOTION_BIT_X BIT(0) +#define BMC150_ACCEL_ANY_MOTION_BIT_Y BIT(1) +#define BMC150_ACCEL_ANY_MOTION_BIT_Z BIT(2) +#define BMC150_ACCEL_ANY_MOTION_BIT_SIGN BIT(3) + +#define BMC150_ACCEL_REG_PMU_LPW 0x11 +#define BMC150_ACCEL_PMU_MODE_MASK 0xE0 +#define BMC150_ACCEL_PMU_MODE_SHIFT 5 +#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_MASK 0x17 +#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT 1 + +#define BMC150_ACCEL_REG_PMU_RANGE 0x0F + +#define BMC150_ACCEL_DEF_RANGE_2G 0x03 +#define BMC150_ACCEL_DEF_RANGE_4G 0x05 +#define BMC150_ACCEL_DEF_RANGE_8G 0x08 +#define BMC150_ACCEL_DEF_RANGE_16G 0x0C + +/* Default BW: 125Hz */ +#define BMC150_ACCEL_REG_PMU_BW 0x10 +#define BMC150_ACCEL_DEF_BW 125 + +#define BMC150_ACCEL_REG_RESET 0x14 +#define BMC150_ACCEL_RESET_VAL 0xB6 + +#define BMC150_ACCEL_REG_INT_MAP_0 0x19 +#define BMC150_ACCEL_INT_MAP_0_BIT_INT1_SLOPE BIT(2) + +#define BMC150_ACCEL_REG_INT_MAP_1 0x1A +#define BMC150_ACCEL_INT_MAP_1_BIT_INT1_DATA BIT(0) +#define BMC150_ACCEL_INT_MAP_1_BIT_INT1_FWM BIT(1) +#define BMC150_ACCEL_INT_MAP_1_BIT_INT1_FFULL BIT(2) +#define BMC150_ACCEL_INT_MAP_1_BIT_INT2_FFULL BIT(5) +#define BMC150_ACCEL_INT_MAP_1_BIT_INT2_FWM BIT(6) +#define BMC150_ACCEL_INT_MAP_1_BIT_INT2_DATA BIT(7) + +#define BMC150_ACCEL_REG_INT_MAP_2 0x1B +#define BMC150_ACCEL_INT_MAP_2_BIT_INT2_SLOPE BIT(2) + +#define BMC150_ACCEL_REG_INT_RST_LATCH 0x21 +#define BMC150_ACCEL_INT_MODE_LATCH_RESET 0x80 +#define BMC150_ACCEL_INT_MODE_LATCH_INT 0x0F +#define BMC150_ACCEL_INT_MODE_NON_LATCH_INT 0x00 + +#define BMC150_ACCEL_REG_INT_EN_0 0x16 +#define BMC150_ACCEL_INT_EN_BIT_SLP_X BIT(0) +#define BMC150_ACCEL_INT_EN_BIT_SLP_Y BIT(1) +#define BMC150_ACCEL_INT_EN_BIT_SLP_Z BIT(2) + +#define BMC150_ACCEL_REG_INT_EN_1 0x17 +#define BMC150_ACCEL_INT_EN_BIT_DATA_EN BIT(4) +#define BMC150_ACCEL_INT_EN_BIT_FFULL_EN BIT(5) +#define BMC150_ACCEL_INT_EN_BIT_FWM_EN BIT(6) + +#define BMC150_ACCEL_REG_INT_OUT_CTRL 0x20 +#define BMC150_ACCEL_INT_OUT_CTRL_INT1_LVL BIT(0) +#define BMC150_ACCEL_INT_OUT_CTRL_INT2_LVL BIT(2) + +#define BMC150_ACCEL_REG_INT_5 0x27 +#define BMC150_ACCEL_SLOPE_DUR_MASK 0x03 + +#define BMC150_ACCEL_REG_INT_6 0x28 +#define BMC150_ACCEL_SLOPE_THRES_MASK 0xFF + +/* Slope duration in terms of number of samples */ +#define BMC150_ACCEL_DEF_SLOPE_DURATION 1 +/* in terms of multiples of g's/LSB, based on range */ +#define BMC150_ACCEL_DEF_SLOPE_THRESHOLD 1 + +#define BMC150_ACCEL_REG_XOUT_L 0x02 + +#define BMC150_ACCEL_MAX_STARTUP_TIME_MS 100 + +/* Sleep Duration values */ +#define BMC150_ACCEL_SLEEP_500_MICRO 0x05 +#define BMC150_ACCEL_SLEEP_1_MS 0x06 +#define BMC150_ACCEL_SLEEP_2_MS 0x07 +#define BMC150_ACCEL_SLEEP_4_MS 0x08 +#define BMC150_ACCEL_SLEEP_6_MS 0x09 +#define BMC150_ACCEL_SLEEP_10_MS 0x0A +#define BMC150_ACCEL_SLEEP_25_MS 0x0B +#define BMC150_ACCEL_SLEEP_50_MS 0x0C +#define BMC150_ACCEL_SLEEP_100_MS 0x0D +#define BMC150_ACCEL_SLEEP_500_MS 0x0E +#define BMC150_ACCEL_SLEEP_1_SEC 0x0F + +#define BMC150_ACCEL_REG_TEMP 0x08 +#define BMC150_ACCEL_TEMP_CENTER_VAL 23 + +#define BMC150_ACCEL_AXIS_TO_REG(axis) (BMC150_ACCEL_REG_XOUT_L + (axis * 2)) +#define BMC150_AUTO_SUSPEND_DELAY_MS 2000 + +#define BMC150_ACCEL_REG_FIFO_STATUS 0x0E +#define BMC150_ACCEL_REG_FIFO_CONFIG0 0x30 +#define BMC150_ACCEL_REG_FIFO_CONFIG1 0x3E +#define BMC150_ACCEL_REG_FIFO_DATA 0x3F +#define BMC150_ACCEL_FIFO_LENGTH 32 + +enum bmc150_accel_axis { + AXIS_X, + AXIS_Y, + AXIS_Z, + AXIS_MAX, +}; + +enum bmc150_power_modes { + BMC150_ACCEL_SLEEP_MODE_NORMAL, + BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, + BMC150_ACCEL_SLEEP_MODE_LPM, + BMC150_ACCEL_SLEEP_MODE_SUSPEND = 0x04, +}; + +struct bmc150_scale_info { + int scale; + u8 reg_range; +}; + +struct bmc150_accel_chip_info { + const char *name; + u8 chip_id; + const struct iio_chan_spec *channels; + int num_channels; + const struct bmc150_scale_info scale_table[4]; +}; + +static const struct { + int val; + int val2; + u8 bw_bits; +} bmc150_accel_samp_freq_table[] = { {15, 620000, 0x08}, + {31, 260000, 0x09}, + {62, 500000, 0x0A}, + {125, 0, 0x0B}, + {250, 0, 0x0C}, + {500, 0, 0x0D}, + {1000, 0, 0x0E}, + {2000, 0, 0x0F} }; + +static __maybe_unused const struct { + int bw_bits; + int msec; +} bmc150_accel_sample_upd_time[] = { {0x08, 64}, + {0x09, 32}, + {0x0A, 16}, + {0x0B, 8}, + {0x0C, 4}, + {0x0D, 2}, + {0x0E, 1}, + {0x0F, 1} }; + +static const struct { + int sleep_dur; + u8 reg_value; +} bmc150_accel_sleep_value_table[] = { {0, 0}, + {500, BMC150_ACCEL_SLEEP_500_MICRO}, + {1000, BMC150_ACCEL_SLEEP_1_MS}, + {2000, BMC150_ACCEL_SLEEP_2_MS}, + {4000, BMC150_ACCEL_SLEEP_4_MS}, + {6000, BMC150_ACCEL_SLEEP_6_MS}, + {10000, BMC150_ACCEL_SLEEP_10_MS}, + {25000, BMC150_ACCEL_SLEEP_25_MS}, + {50000, BMC150_ACCEL_SLEEP_50_MS}, + {100000, BMC150_ACCEL_SLEEP_100_MS}, + {500000, BMC150_ACCEL_SLEEP_500_MS}, + {1000000, BMC150_ACCEL_SLEEP_1_SEC} }; + +const struct regmap_config bmc150_regmap_conf = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x3f, +}; +EXPORT_SYMBOL_NS_GPL(bmc150_regmap_conf, IIO_BMC150); + +static int bmc150_accel_set_mode(struct bmc150_accel_data *data, + enum bmc150_power_modes mode, + int dur_us) +{ + struct device *dev = regmap_get_device(data->regmap); + int i; + int ret; + u8 lpw_bits; + int dur_val = -1; + + if (dur_us > 0) { + for (i = 0; i < ARRAY_SIZE(bmc150_accel_sleep_value_table); + ++i) { + if (bmc150_accel_sleep_value_table[i].sleep_dur == + dur_us) + dur_val = + bmc150_accel_sleep_value_table[i].reg_value; + } + } else { + dur_val = 0; + } + + if (dur_val < 0) + return -EINVAL; + + lpw_bits = mode << BMC150_ACCEL_PMU_MODE_SHIFT; + lpw_bits |= (dur_val << BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT); + + dev_dbg(dev, "Set Mode bits %x\n", lpw_bits); + + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_LPW, lpw_bits); + if (ret < 0) { + dev_err(dev, "Error writing reg_pmu_lpw\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, + int val2) +{ + int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) { + if (bmc150_accel_samp_freq_table[i].val == val && + bmc150_accel_samp_freq_table[i].val2 == val2) { + ret = regmap_write(data->regmap, + BMC150_ACCEL_REG_PMU_BW, + bmc150_accel_samp_freq_table[i].bw_bits); + if (ret < 0) + return ret; + + data->bw_bits = + bmc150_accel_samp_freq_table[i].bw_bits; + return 0; + } + } + + return -EINVAL; +} + +static int bmc150_accel_update_slope(struct bmc150_accel_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_6, + data->slope_thres); + if (ret < 0) { + dev_err(dev, "Error writing reg_int_6\n"); + return ret; + } + + ret = regmap_update_bits(data->regmap, BMC150_ACCEL_REG_INT_5, + BMC150_ACCEL_SLOPE_DUR_MASK, data->slope_dur); + if (ret < 0) { + dev_err(dev, "Error updating reg_int_5\n"); + return ret; + } + + dev_dbg(dev, "%x %x\n", data->slope_thres, data->slope_dur); + + return ret; +} + +static int bmc150_accel_any_motion_setup(struct bmc150_accel_trigger *t, + bool state) +{ + if (state) + return bmc150_accel_update_slope(t->data); + + return 0; +} + +static int bmc150_accel_get_bw(struct bmc150_accel_data *data, int *val, + int *val2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) { + if (bmc150_accel_samp_freq_table[i].bw_bits == data->bw_bits) { + *val = bmc150_accel_samp_freq_table[i].val; + *val2 = bmc150_accel_samp_freq_table[i].val2; + return IIO_VAL_INT_PLUS_MICRO; + } + } + + return -EINVAL; +} + +#ifdef CONFIG_PM +static int bmc150_accel_get_startup_times(struct bmc150_accel_data *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_sample_upd_time); ++i) { + if (bmc150_accel_sample_upd_time[i].bw_bits == data->bw_bits) + return bmc150_accel_sample_upd_time[i].msec; + } + + return BMC150_ACCEL_MAX_STARTUP_TIME_MS; +} + +static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + + if (on) { + ret = pm_runtime_resume_and_get(dev); + } else { + pm_runtime_mark_last_busy(dev); + ret = pm_runtime_put_autosuspend(dev); + } + + if (ret < 0) { + dev_err(dev, + "Failed: %s for %d\n", __func__, on); + return ret; + } + + return 0; +} +#else +static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on) +{ + return 0; +} +#endif + +#ifdef CONFIG_ACPI +/* + * Support for getting accelerometer information from BOSC0200 ACPI nodes. + * + * There are 2 variants of the BOSC0200 ACPI node. Some 2-in-1s with 360 degree + * hinges declare 2 I2C ACPI-resources for 2 accelerometers, 1 in the display + * and 1 in the base of the 2-in-1. On these 2-in-1s the ROMS ACPI object + * contains the mount-matrix for the sensor in the display and ROMK contains + * the mount-matrix for the sensor in the base. On devices using a single + * sensor there is a ROTM ACPI object which contains the mount-matrix. + * + * Here is an incomplete list of devices known to use 1 of these setups: + * + * Yoga devices with 2 accelerometers using ROMS + ROMK for the mount-matrices: + * Lenovo Thinkpad Yoga 11e 3th gen + * Lenovo Thinkpad Yoga 11e 4th gen + * + * Tablets using a single accelerometer using ROTM for the mount-matrix: + * Chuwi Hi8 Pro (CWI513) + * Chuwi Vi8 Plus (CWI519) + * Chuwi Hi13 + * Irbis TW90 + * Jumper EZpad mini 3 + * Onda V80 plus + * Predia Basic Tablet + */ +static bool bmc150_apply_bosc0200_acpi_orientation(struct device *dev, + struct iio_mount_matrix *orientation) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct acpi_device *adev = ACPI_COMPANION(dev); + char *name, *alt_name, *label, *str; + union acpi_object *obj, *elements; + acpi_status status; + int i, j, val[3]; + + if (strcmp(dev_name(dev), "i2c-BOSC0200:base") == 0) { + alt_name = "ROMK"; + label = "accel-base"; + } else { + alt_name = "ROMS"; + label = "accel-display"; + } + + if (acpi_has_method(adev->handle, "ROTM")) { + name = "ROTM"; + } else if (acpi_has_method(adev->handle, alt_name)) { + name = alt_name; + indio_dev->label = label; + } else { + return false; + } + + status = acpi_evaluate_object(adev->handle, name, NULL, &buffer); + if (ACPI_FAILURE(status)) { + dev_warn(dev, "Failed to get ACPI mount matrix: %d\n", status); + return false; + } + + obj = buffer.pointer; + if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count != 3) + goto unknown_format; + + elements = obj->package.elements; + for (i = 0; i < 3; i++) { + if (elements[i].type != ACPI_TYPE_STRING) + goto unknown_format; + + str = elements[i].string.pointer; + if (sscanf(str, "%d %d %d", &val[0], &val[1], &val[2]) != 3) + goto unknown_format; + + for (j = 0; j < 3; j++) { + switch (val[j]) { + case -1: str = "-1"; break; + case 0: str = "0"; break; + case 1: str = "1"; break; + default: goto unknown_format; + } + orientation->rotation[i * 3 + j] = str; + } + } + + kfree(buffer.pointer); + return true; + +unknown_format: + dev_warn(dev, "Unknown ACPI mount matrix format, ignoring\n"); + kfree(buffer.pointer); + return false; +} + +static bool bmc150_apply_dual250e_acpi_orientation(struct device *dev, + struct iio_mount_matrix *orientation) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + + if (strcmp(dev_name(dev), "i2c-DUAL250E:base") == 0) + indio_dev->label = "accel-base"; + else + indio_dev->label = "accel-display"; + + return false; /* DUAL250E fwnodes have no mount matrix info */ +} + +static bool bmc150_apply_acpi_orientation(struct device *dev, + struct iio_mount_matrix *orientation) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + + if (adev && acpi_dev_hid_uid_match(adev, "BOSC0200", NULL)) + return bmc150_apply_bosc0200_acpi_orientation(dev, orientation); + + if (adev && acpi_dev_hid_uid_match(adev, "DUAL250E", NULL)) + return bmc150_apply_dual250e_acpi_orientation(dev, orientation); + + return false; +} +#else +static bool bmc150_apply_acpi_orientation(struct device *dev, + struct iio_mount_matrix *orientation) +{ + return false; +} +#endif + +struct bmc150_accel_interrupt_info { + u8 map_reg; + u8 map_bitmask; + u8 en_reg; + u8 en_bitmask; +}; + +static const struct bmc150_accel_interrupt_info +bmc150_accel_interrupts_int1[BMC150_ACCEL_INTERRUPTS] = { + { /* data ready interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_1, + .map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_INT1_DATA, + .en_reg = BMC150_ACCEL_REG_INT_EN_1, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_DATA_EN, + }, + { /* motion interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_0, + .map_bitmask = BMC150_ACCEL_INT_MAP_0_BIT_INT1_SLOPE, + .en_reg = BMC150_ACCEL_REG_INT_EN_0, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_SLP_X | + BMC150_ACCEL_INT_EN_BIT_SLP_Y | + BMC150_ACCEL_INT_EN_BIT_SLP_Z + }, + { /* fifo watermark interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_1, + .map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_INT1_FWM, + .en_reg = BMC150_ACCEL_REG_INT_EN_1, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_FWM_EN, + }, +}; + +static const struct bmc150_accel_interrupt_info +bmc150_accel_interrupts_int2[BMC150_ACCEL_INTERRUPTS] = { + { /* data ready interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_1, + .map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_INT2_DATA, + .en_reg = BMC150_ACCEL_REG_INT_EN_1, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_DATA_EN, + }, + { /* motion interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_2, + .map_bitmask = BMC150_ACCEL_INT_MAP_2_BIT_INT2_SLOPE, + .en_reg = BMC150_ACCEL_REG_INT_EN_0, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_SLP_X | + BMC150_ACCEL_INT_EN_BIT_SLP_Y | + BMC150_ACCEL_INT_EN_BIT_SLP_Z + }, + { /* fifo watermark interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_1, + .map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_INT2_FWM, + .en_reg = BMC150_ACCEL_REG_INT_EN_1, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_FWM_EN, + }, +}; + +static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev, + struct bmc150_accel_data *data, int irq) +{ + const struct bmc150_accel_interrupt_info *irq_info = NULL; + struct device *dev = regmap_get_device(data->regmap); + int i; + + /* + * For now we map all interrupts to the same output pin. + * However, some boards may have just INT2 (and not INT1) connected, + * so we try to detect which IRQ it is based on the interrupt-names. + * Without interrupt-names, we assume the irq belongs to INT1. + */ + irq_info = bmc150_accel_interrupts_int1; + if (data->type == BOSCH_BMC156 || + irq == of_irq_get_byname(dev->of_node, "INT2")) + irq_info = bmc150_accel_interrupts_int2; + + for (i = 0; i < BMC150_ACCEL_INTERRUPTS; i++) + data->interrupts[i].info = &irq_info[i]; +} + +static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, + bool state) +{ + struct device *dev = regmap_get_device(data->regmap); + struct bmc150_accel_interrupt *intr = &data->interrupts[i]; + const struct bmc150_accel_interrupt_info *info = intr->info; + int ret; + + if (state) { + if (atomic_inc_return(&intr->users) > 1) + return 0; + } else { + if (atomic_dec_return(&intr->users) > 0) + return 0; + } + + /* + * We will expect the enable and disable to do operation in reverse + * order. This will happen here anyway, as our resume operation uses + * sync mode runtime pm calls. The suspend operation will be delayed + * by autosuspend delay. + * So the disable operation will still happen in reverse order of + * enable operation. When runtime pm is disabled the mode is always on, + * so sequence doesn't matter. + */ + ret = bmc150_accel_set_power_state(data, state); + if (ret < 0) + return ret; + + /* map the interrupt to the appropriate pins */ + ret = regmap_update_bits(data->regmap, info->map_reg, info->map_bitmask, + (state ? info->map_bitmask : 0)); + if (ret < 0) { + dev_err(dev, "Error updating reg_int_map\n"); + goto out_fix_power_state; + } + + /* enable/disable the interrupt */ + ret = regmap_update_bits(data->regmap, info->en_reg, info->en_bitmask, + (state ? info->en_bitmask : 0)); + if (ret < 0) { + dev_err(dev, "Error updating reg_int_en\n"); + goto out_fix_power_state; + } + + return 0; + +out_fix_power_state: + bmc150_accel_set_power_state(data, false); + return ret; +} + +static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret, i; + + for (i = 0; i < ARRAY_SIZE(data->chip_info->scale_table); ++i) { + if (data->chip_info->scale_table[i].scale == val) { + ret = regmap_write(data->regmap, + BMC150_ACCEL_REG_PMU_RANGE, + data->chip_info->scale_table[i].reg_range); + if (ret < 0) { + dev_err(dev, "Error writing pmu_range\n"); + return ret; + } + + data->range = data->chip_info->scale_table[i].reg_range; + return 0; + } + } + + return -EINVAL; +} + +static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + unsigned int value; + + mutex_lock(&data->mutex); + + ret = regmap_read(data->regmap, BMC150_ACCEL_REG_TEMP, &value); + if (ret < 0) { + dev_err(dev, "Error reading reg_temp\n"); + mutex_unlock(&data->mutex); + return ret; + } + *val = sign_extend32(value, 7); + + mutex_unlock(&data->mutex); + + return IIO_VAL_INT; +} + +static int bmc150_accel_get_axis(struct bmc150_accel_data *data, + struct iio_chan_spec const *chan, + int *val) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + int axis = chan->scan_index; + __le16 raw_val; + + mutex_lock(&data->mutex); + ret = bmc150_accel_set_power_state(data, true); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + + ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_AXIS_TO_REG(axis), + &raw_val, sizeof(raw_val)); + if (ret < 0) { + dev_err(dev, "Error reading axis %d\n", axis); + bmc150_accel_set_power_state(data, false); + mutex_unlock(&data->mutex); + return ret; + } + *val = sign_extend32(le16_to_cpu(raw_val) >> chan->scan_type.shift, + chan->scan_type.realbits - 1); + ret = bmc150_accel_set_power_state(data, false); + mutex_unlock(&data->mutex); + if (ret < 0) + return ret; + + return IIO_VAL_INT; +} + +static int bmc150_accel_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_TEMP: + return bmc150_accel_get_temp(data, val); + case IIO_ACCEL: + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + else + return bmc150_accel_get_axis(data, chan, val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + if (chan->type == IIO_TEMP) { + *val = BMC150_ACCEL_TEMP_CENTER_VAL; + return IIO_VAL_INT; + } else { + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + *val = 0; + switch (chan->type) { + case IIO_TEMP: + *val2 = 500000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_ACCEL: + { + int i; + const struct bmc150_scale_info *si; + int st_size = ARRAY_SIZE(data->chip_info->scale_table); + + for (i = 0; i < st_size; ++i) { + si = &data->chip_info->scale_table[i]; + if (si->reg_range == data->range) { + *val2 = si->scale; + return IIO_VAL_INT_PLUS_MICRO; + } + } + return -EINVAL; + } + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = bmc150_accel_get_bw(data, val, val2); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } +} + +static int bmc150_accel_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = bmc150_accel_set_bw(data, val, val2); + mutex_unlock(&data->mutex); + break; + case IIO_CHAN_INFO_SCALE: + if (val) + return -EINVAL; + + mutex_lock(&data->mutex); + ret = bmc150_accel_set_scale(data, val2); + mutex_unlock(&data->mutex); + return ret; + default: + ret = -EINVAL; + } + + return ret; +} + +static int bmc150_accel_read_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + *val2 = 0; + switch (info) { + case IIO_EV_INFO_VALUE: + *val = data->slope_thres; + break; + case IIO_EV_INFO_PERIOD: + *val = data->slope_dur; + break; + default: + return -EINVAL; + } + + return IIO_VAL_INT; +} + +static int bmc150_accel_write_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (data->ev_enable_state) + return -EBUSY; + + switch (info) { + case IIO_EV_INFO_VALUE: + data->slope_thres = val & BMC150_ACCEL_SLOPE_THRES_MASK; + break; + case IIO_EV_INFO_PERIOD: + data->slope_dur = val & BMC150_ACCEL_SLOPE_DUR_MASK; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int bmc150_accel_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + return data->ev_enable_state; +} + +static int bmc150_accel_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + if (state == data->ev_enable_state) + return 0; + + mutex_lock(&data->mutex); + + ret = bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_ANY_MOTION, + state); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + + data->ev_enable_state = state; + mutex_unlock(&data->mutex); + + return 0; +} + +static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int i; + + for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { + if (data->triggers[i].indio_trig == trig) + return 0; + } + + return -EINVAL; +} + +static ssize_t bmc150_accel_get_fifo_watermark(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + int wm; + + mutex_lock(&data->mutex); + wm = data->watermark; + mutex_unlock(&data->mutex); + + return sprintf(buf, "%d\n", wm); +} + +static ssize_t bmc150_accel_get_fifo_state(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + bool state; + + mutex_lock(&data->mutex); + state = data->fifo_mode; + mutex_unlock(&data->mutex); + + return sprintf(buf, "%d\n", state); +} + +static const struct iio_mount_matrix * +bmc150_accel_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + return &data->orientation; +} + +static const struct iio_chan_spec_ext_info bmc150_accel_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bmc150_accel_get_mount_matrix), + { } +}; + +IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_min, "1"); +IIO_STATIC_CONST_DEVICE_ATTR(hwfifo_watermark_max, + __stringify(BMC150_ACCEL_FIFO_LENGTH)); +static IIO_DEVICE_ATTR(hwfifo_enabled, S_IRUGO, + bmc150_accel_get_fifo_state, NULL, 0); +static IIO_DEVICE_ATTR(hwfifo_watermark, S_IRUGO, + bmc150_accel_get_fifo_watermark, NULL, 0); + +static const struct iio_dev_attr *bmc150_accel_fifo_attributes[] = { + &iio_dev_attr_hwfifo_watermark_min, + &iio_dev_attr_hwfifo_watermark_max, + &iio_dev_attr_hwfifo_watermark, + &iio_dev_attr_hwfifo_enabled, + NULL, +}; + +static int bmc150_accel_set_watermark(struct iio_dev *indio_dev, unsigned val) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (val > BMC150_ACCEL_FIFO_LENGTH) + val = BMC150_ACCEL_FIFO_LENGTH; + + mutex_lock(&data->mutex); + data->watermark = val; + mutex_unlock(&data->mutex); + + return 0; +} + +/* + * We must read at least one full frame in one burst, otherwise the rest of the + * frame data is discarded. + */ +static int bmc150_accel_fifo_transfer(struct bmc150_accel_data *data, + char *buffer, int samples) +{ + struct device *dev = regmap_get_device(data->regmap); + int sample_length = 3 * 2; + int ret; + int total_length = samples * sample_length; + + ret = regmap_raw_read(data->regmap, BMC150_ACCEL_REG_FIFO_DATA, + buffer, total_length); + if (ret) + dev_err(dev, + "Error transferring data from fifo: %d\n", ret); + + return ret; +} + +static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, + unsigned samples, bool irq) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); + int ret, i; + u8 count; + u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; + int64_t tstamp; + uint64_t sample_period; + unsigned int val; + + ret = regmap_read(data->regmap, BMC150_ACCEL_REG_FIFO_STATUS, &val); + if (ret < 0) { + dev_err(dev, "Error reading reg_fifo_status\n"); + return ret; + } + + count = val & 0x7F; + + if (!count) + return 0; + + /* + * If we getting called from IRQ handler we know the stored timestamp is + * fairly accurate for the last stored sample. Otherwise, if we are + * called as a result of a read operation from userspace and hence + * before the watermark interrupt was triggered, take a timestamp + * now. We can fall anywhere in between two samples so the error in this + * case is at most one sample period. + */ + if (!irq) { + data->old_timestamp = data->timestamp; + data->timestamp = iio_get_time_ns(indio_dev); + } + + /* + * Approximate timestamps for each of the sample based on the sampling + * frequency, timestamp for last sample and number of samples. + * + * Note that we can't use the current bandwidth settings to compute the + * sample period because the sample rate varies with the device + * (e.g. between 31.70ms to 32.20ms for a bandwidth of 15.63HZ). That + * small variation adds when we store a large number of samples and + * creates significant jitter between the last and first samples in + * different batches (e.g. 32ms vs 21ms). + * + * To avoid this issue we compute the actual sample period ourselves + * based on the timestamp delta between the last two flush operations. + */ + sample_period = (data->timestamp - data->old_timestamp); + do_div(sample_period, count); + tstamp = data->timestamp - (count - 1) * sample_period; + + if (samples && count > samples) + count = samples; + + ret = bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); + if (ret) + return ret; + + /* + * Ideally we want the IIO core to handle the demux when running in fifo + * mode but not when running in triggered buffer mode. Unfortunately + * this does not seem to be possible, so stick with driver demux for + * now. + */ + for (i = 0; i < count; i++) { + int j, bit; + + j = 0; + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) + memcpy(&data->scan.channels[j++], &buffer[i * 3 + bit], + sizeof(data->scan.channels[0])); + + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + tstamp); + + tstamp += sample_period; + } + + return count; +} + +static int bmc150_accel_fifo_flush(struct iio_dev *indio_dev, unsigned samples) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = __bmc150_accel_fifo_flush(indio_dev, samples, false); + mutex_unlock(&data->mutex); + + return ret; +} + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( + "15.620000 31.260000 62.50000 125 250 500 1000 2000"); + +static struct attribute *bmc150_accel_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bmc150_accel_attrs_group = { + .attrs = bmc150_accel_attributes, +}; + +static const struct iio_event_spec bmc150_accel_event = { + .type = IIO_EV_TYPE_ROC, + .dir = IIO_EV_DIR_EITHER, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_PERIOD) +}; + +#define BMC150_ACCEL_CHANNEL(_axis, bits) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = AXIS_##_axis, \ + .scan_type = { \ + .sign = 's', \ + .realbits = (bits), \ + .storagebits = 16, \ + .shift = 16 - (bits), \ + .endianness = IIO_LE, \ + }, \ + .ext_info = bmc150_accel_ext_info, \ + .event_spec = &bmc150_accel_event, \ + .num_event_specs = 1 \ +} + +#define BMC150_ACCEL_CHANNELS(bits) { \ + { \ + .type = IIO_TEMP, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .scan_index = -1, \ + }, \ + BMC150_ACCEL_CHANNEL(X, bits), \ + BMC150_ACCEL_CHANNEL(Y, bits), \ + BMC150_ACCEL_CHANNEL(Z, bits), \ + IIO_CHAN_SOFT_TIMESTAMP(3), \ +} + +static const struct iio_chan_spec bma222e_accel_channels[] = + BMC150_ACCEL_CHANNELS(8); +static const struct iio_chan_spec bma250e_accel_channels[] = + BMC150_ACCEL_CHANNELS(10); +static const struct iio_chan_spec bmc150_accel_channels[] = + BMC150_ACCEL_CHANNELS(12); +static const struct iio_chan_spec bma280_accel_channels[] = + BMC150_ACCEL_CHANNELS(14); + +/* + * The range for the Bosch sensors is typically +-2g/4g/8g/16g, distributed + * over the amount of bits (see above). The scale table can be calculated using + * (range / 2^bits) * g = (range / 2^bits) * 9.80665 m/s^2 + * e.g. for +-2g and 12 bits: (4 / 2^12) * 9.80665 m/s^2 = 0.0095768... m/s^2 + * Multiply 10^6 and round to get the values listed below. + */ +static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = { + { + .name = "BMA222", + .chip_id = 0x03, + .channels = bma222e_accel_channels, + .num_channels = ARRAY_SIZE(bma222e_accel_channels), + .scale_table = { {153229, BMC150_ACCEL_DEF_RANGE_2G}, + {306458, BMC150_ACCEL_DEF_RANGE_4G}, + {612916, BMC150_ACCEL_DEF_RANGE_8G}, + {1225831, BMC150_ACCEL_DEF_RANGE_16G} }, + }, + { + .name = "BMA222E", + .chip_id = 0xF8, + .channels = bma222e_accel_channels, + .num_channels = ARRAY_SIZE(bma222e_accel_channels), + .scale_table = { {153229, BMC150_ACCEL_DEF_RANGE_2G}, + {306458, BMC150_ACCEL_DEF_RANGE_4G}, + {612916, BMC150_ACCEL_DEF_RANGE_8G}, + {1225831, BMC150_ACCEL_DEF_RANGE_16G} }, + }, + { + .name = "BMA250E", + .chip_id = 0xF9, + .channels = bma250e_accel_channels, + .num_channels = ARRAY_SIZE(bma250e_accel_channels), + .scale_table = { {38307, BMC150_ACCEL_DEF_RANGE_2G}, + {76614, BMC150_ACCEL_DEF_RANGE_4G}, + {153229, BMC150_ACCEL_DEF_RANGE_8G}, + {306458, BMC150_ACCEL_DEF_RANGE_16G} }, + }, + { + .name = "BMA253/BMA254/BMA255/BMC150/BMC156/BMI055", + .chip_id = 0xFA, + .channels = bmc150_accel_channels, + .num_channels = ARRAY_SIZE(bmc150_accel_channels), + .scale_table = { {9577, BMC150_ACCEL_DEF_RANGE_2G}, + {19154, BMC150_ACCEL_DEF_RANGE_4G}, + {38307, BMC150_ACCEL_DEF_RANGE_8G}, + {76614, BMC150_ACCEL_DEF_RANGE_16G} }, + }, + { + .name = "BMA280", + .chip_id = 0xFB, + .channels = bma280_accel_channels, + .num_channels = ARRAY_SIZE(bma280_accel_channels), + .scale_table = { {2394, BMC150_ACCEL_DEF_RANGE_2G}, + {4788, BMC150_ACCEL_DEF_RANGE_4G}, + {9577, BMC150_ACCEL_DEF_RANGE_8G}, + {19154, BMC150_ACCEL_DEF_RANGE_16G} }, + }, +}; + +static const struct iio_info bmc150_accel_info = { + .attrs = &bmc150_accel_attrs_group, + .read_raw = bmc150_accel_read_raw, + .write_raw = bmc150_accel_write_raw, + .read_event_value = bmc150_accel_read_event, + .write_event_value = bmc150_accel_write_event, + .write_event_config = bmc150_accel_write_event_config, + .read_event_config = bmc150_accel_read_event_config, +}; + +static const struct iio_info bmc150_accel_info_fifo = { + .attrs = &bmc150_accel_attrs_group, + .read_raw = bmc150_accel_read_raw, + .write_raw = bmc150_accel_write_raw, + .read_event_value = bmc150_accel_read_event, + .write_event_value = bmc150_accel_write_event, + .write_event_config = bmc150_accel_write_event_config, + .read_event_config = bmc150_accel_read_event_config, + .validate_trigger = bmc150_accel_validate_trigger, + .hwfifo_set_watermark = bmc150_accel_set_watermark, + .hwfifo_flush_to_buffer = bmc150_accel_fifo_flush, +}; + +static const unsigned long bmc150_accel_scan_masks[] = { + BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z), + 0}; + +static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_REG_XOUT_L, + data->buffer, AXIS_MAX * 2); + mutex_unlock(&data->mutex); + if (ret < 0) + goto err_read; + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + pf->timestamp); +err_read: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static void bmc150_accel_trig_reen(struct iio_trigger *trig) +{ + struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig); + struct bmc150_accel_data *data = t->data; + struct device *dev = regmap_get_device(data->regmap); + int ret; + + /* new data interrupts don't need ack */ + if (t == &t->data->triggers[BMC150_ACCEL_TRIGGER_DATA_READY]) + return; + + mutex_lock(&data->mutex); + /* clear any latched interrupt */ + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + mutex_unlock(&data->mutex); + if (ret < 0) + dev_err(dev, "Error writing reg_int_rst_latch\n"); +} + +static int bmc150_accel_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig); + struct bmc150_accel_data *data = t->data; + int ret; + + mutex_lock(&data->mutex); + + if (t->enabled == state) { + mutex_unlock(&data->mutex); + return 0; + } + + if (t->setup) { + ret = t->setup(t, state); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + } + + ret = bmc150_accel_set_interrupt(data, t->intr, state); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + + t->enabled = state; + + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct iio_trigger_ops bmc150_accel_trigger_ops = { + .set_trigger_state = bmc150_accel_trigger_set_state, + .reenable = bmc150_accel_trig_reen, +}; + +static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); + int dir; + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, BMC150_ACCEL_REG_INT_STATUS_2, &val); + if (ret < 0) { + dev_err(dev, "Error reading reg_int_status_2\n"); + return ret; + } + + if (val & BMC150_ACCEL_ANY_MOTION_BIT_SIGN) + dir = IIO_EV_DIR_FALLING; + else + dir = IIO_EV_DIR_RISING; + + if (val & BMC150_ACCEL_ANY_MOTION_BIT_X) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, + 0, + IIO_MOD_X, + IIO_EV_TYPE_ROC, + dir), + data->timestamp); + + if (val & BMC150_ACCEL_ANY_MOTION_BIT_Y) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, + 0, + IIO_MOD_Y, + IIO_EV_TYPE_ROC, + dir), + data->timestamp); + + if (val & BMC150_ACCEL_ANY_MOTION_BIT_Z) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, + 0, + IIO_MOD_Z, + IIO_EV_TYPE_ROC, + dir), + data->timestamp); + + return ret; +} + +static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct bmc150_accel_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); + bool ack = false; + int ret; + + mutex_lock(&data->mutex); + + if (data->fifo_mode) { + ret = __bmc150_accel_fifo_flush(indio_dev, + BMC150_ACCEL_FIFO_LENGTH, true); + if (ret > 0) + ack = true; + } + + if (data->ev_enable_state) { + ret = bmc150_accel_handle_roc_event(indio_dev); + if (ret > 0) + ack = true; + } + + if (ack) { + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret) + dev_err(dev, "Error writing reg_int_rst_latch\n"); + + ret = IRQ_HANDLED; + } else { + ret = IRQ_NONE; + } + + mutex_unlock(&data->mutex); + + return ret; +} + +static irqreturn_t bmc150_accel_irq_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct bmc150_accel_data *data = iio_priv(indio_dev); + bool ack = false; + int i; + + data->old_timestamp = data->timestamp; + data->timestamp = iio_get_time_ns(indio_dev); + + for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { + if (data->triggers[i].enabled) { + iio_trigger_poll(data->triggers[i].indio_trig); + ack = true; + break; + } + } + + if (data->ev_enable_state || data->fifo_mode) + return IRQ_WAKE_THREAD; + + if (ack) + return IRQ_HANDLED; + + return IRQ_NONE; +} + +static const struct { + int intr; + const char *name; + int (*setup)(struct bmc150_accel_trigger *t, bool state); +} bmc150_accel_triggers[BMC150_ACCEL_TRIGGERS] = { + { + .intr = 0, + .name = "%s-dev%d", + }, + { + .intr = 1, + .name = "%s-any-motion-dev%d", + .setup = bmc150_accel_any_motion_setup, + }, +}; + +static void bmc150_accel_unregister_triggers(struct bmc150_accel_data *data, + int from) +{ + int i; + + for (i = from; i >= 0; i--) { + if (data->triggers[i].indio_trig) { + iio_trigger_unregister(data->triggers[i].indio_trig); + data->triggers[i].indio_trig = NULL; + } + } +} + +static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, + struct bmc150_accel_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + int i, ret; + + for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { + struct bmc150_accel_trigger *t = &data->triggers[i]; + + t->indio_trig = devm_iio_trigger_alloc(dev, + bmc150_accel_triggers[i].name, + indio_dev->name, + iio_device_id(indio_dev)); + if (!t->indio_trig) { + ret = -ENOMEM; + break; + } + + t->indio_trig->ops = &bmc150_accel_trigger_ops; + t->intr = bmc150_accel_triggers[i].intr; + t->data = data; + t->setup = bmc150_accel_triggers[i].setup; + iio_trigger_set_drvdata(t->indio_trig, t); + + ret = iio_trigger_register(t->indio_trig); + if (ret) + break; + } + + if (ret) + bmc150_accel_unregister_triggers(data, i - 1); + + return ret; +} + +#define BMC150_ACCEL_FIFO_MODE_STREAM 0x80 +#define BMC150_ACCEL_FIFO_MODE_FIFO 0x40 +#define BMC150_ACCEL_FIFO_MODE_BYPASS 0x00 + +static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + u8 reg = BMC150_ACCEL_REG_FIFO_CONFIG1; + int ret; + + ret = regmap_write(data->regmap, reg, data->fifo_mode); + if (ret < 0) { + dev_err(dev, "Error writing reg_fifo_config1\n"); + return ret; + } + + if (!data->fifo_mode) + return 0; + + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_FIFO_CONFIG0, + data->watermark); + if (ret < 0) + dev_err(dev, "Error writing reg_fifo_config0\n"); + + return ret; +} + +static int bmc150_accel_buffer_preenable(struct iio_dev *indio_dev) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + return bmc150_accel_set_power_state(data, true); +} + +static int bmc150_accel_buffer_postenable(struct iio_dev *indio_dev) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret = 0; + + if (iio_device_get_current_mode(indio_dev) == INDIO_BUFFER_TRIGGERED) + return 0; + + mutex_lock(&data->mutex); + + if (!data->watermark) + goto out; + + ret = bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, + true); + if (ret) + goto out; + + data->fifo_mode = BMC150_ACCEL_FIFO_MODE_FIFO; + + ret = bmc150_accel_fifo_set_mode(data); + if (ret) { + data->fifo_mode = 0; + bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, + false); + } + +out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bmc150_accel_buffer_predisable(struct iio_dev *indio_dev) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (iio_device_get_current_mode(indio_dev) == INDIO_BUFFER_TRIGGERED) + return 0; + + mutex_lock(&data->mutex); + + if (!data->fifo_mode) + goto out; + + bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, false); + __bmc150_accel_fifo_flush(indio_dev, BMC150_ACCEL_FIFO_LENGTH, false); + data->fifo_mode = 0; + bmc150_accel_fifo_set_mode(data); + +out: + mutex_unlock(&data->mutex); + + return 0; +} + +static int bmc150_accel_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + return bmc150_accel_set_power_state(data, false); +} + +static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = { + .preenable = bmc150_accel_buffer_preenable, + .postenable = bmc150_accel_buffer_postenable, + .predisable = bmc150_accel_buffer_predisable, + .postdisable = bmc150_accel_buffer_postdisable, +}; + +static int bmc150_accel_chip_init(struct bmc150_accel_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret, i; + unsigned int val; + + /* + * Reset chip to get it in a known good state. A delay of 1.8ms after + * reset is required according to the data sheets of supported chips. + */ + regmap_write(data->regmap, BMC150_ACCEL_REG_RESET, + BMC150_ACCEL_RESET_VAL); + usleep_range(1800, 2500); + + ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val); + if (ret < 0) { + dev_err(dev, "Error: Reading chip id\n"); + return ret; + } + + dev_dbg(dev, "Chip Id %x\n", val); + for (i = 0; i < ARRAY_SIZE(bmc150_accel_chip_info_tbl); i++) { + if (bmc150_accel_chip_info_tbl[i].chip_id == val) { + data->chip_info = &bmc150_accel_chip_info_tbl[i]; + break; + } + } + + if (!data->chip_info) { + dev_err(dev, "Invalid chip %x\n", val); + return -ENODEV; + } + + ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); + if (ret < 0) + return ret; + + /* Set Bandwidth */ + ret = bmc150_accel_set_bw(data, BMC150_ACCEL_DEF_BW, 0); + if (ret < 0) + return ret; + + /* Set Default Range */ + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_RANGE, + BMC150_ACCEL_DEF_RANGE_4G); + if (ret < 0) { + dev_err(dev, "Error writing reg_pmu_range\n"); + return ret; + } + + data->range = BMC150_ACCEL_DEF_RANGE_4G; + + /* Set default slope duration and thresholds */ + data->slope_thres = BMC150_ACCEL_DEF_SLOPE_THRESHOLD; + data->slope_dur = BMC150_ACCEL_DEF_SLOPE_DURATION; + ret = bmc150_accel_update_slope(data); + if (ret < 0) + return ret; + + /* Set default as latched interrupts */ + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(dev, "Error writing reg_int_rst_latch\n"); + return ret; + } + + return 0; +} + +int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, + enum bmc150_type type, const char *name, + bool block_supported) +{ + const struct iio_dev_attr **fifo_attrs; + struct bmc150_accel_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + + data->regmap = regmap; + data->type = type; + + if (!bmc150_apply_acpi_orientation(dev, &data->orientation)) { + ret = iio_read_mount_matrix(dev, &data->orientation); + if (ret) + return ret; + } + + /* + * VDD is the analog and digital domain voltage supply + * VDDIO is the digital I/O voltage supply + */ + data->regulators[0].supply = "vdd"; + data->regulators[1].supply = "vddio"; + ret = devm_regulator_bulk_get(dev, + ARRAY_SIZE(data->regulators), + data->regulators); + if (ret) + return dev_err_probe(dev, ret, "failed to get regulators\n"); + + ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators), + data->regulators); + if (ret) { + dev_err(dev, "failed to enable regulators: %d\n", ret); + return ret; + } + /* + * 2ms or 3ms power-on time according to datasheets, let's better + * be safe than sorry and set this delay to 5ms. + */ + msleep(5); + + ret = bmc150_accel_chip_init(data); + if (ret < 0) + goto err_disable_regulators; + + mutex_init(&data->mutex); + + indio_dev->channels = data->chip_info->channels; + indio_dev->num_channels = data->chip_info->num_channels; + indio_dev->name = name ? name : data->chip_info->name; + indio_dev->available_scan_masks = bmc150_accel_scan_masks; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &bmc150_accel_info; + + if (block_supported) { + indio_dev->modes |= INDIO_BUFFER_SOFTWARE; + indio_dev->info = &bmc150_accel_info_fifo; + fifo_attrs = bmc150_accel_fifo_attributes; + } else { + fifo_attrs = NULL; + } + + ret = iio_triggered_buffer_setup_ext(indio_dev, + &iio_pollfunc_store_time, + bmc150_accel_trigger_handler, + IIO_BUFFER_DIRECTION_IN, + &bmc150_accel_buffer_ops, + fifo_attrs); + if (ret < 0) { + dev_err(dev, "Failed: iio triggered buffer setup\n"); + goto err_disable_regulators; + } + + if (irq > 0) { + ret = devm_request_threaded_irq(dev, irq, + bmc150_accel_irq_handler, + bmc150_accel_irq_thread_handler, + IRQF_TRIGGER_RISING, + BMC150_ACCEL_IRQ_NAME, + indio_dev); + if (ret) + goto err_buffer_cleanup; + + /* + * Set latched mode interrupt. While certain interrupts are + * non-latched regardless of this settings (e.g. new data) we + * want to use latch mode when we can to prevent interrupt + * flooding. + */ + ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(dev, "Error writing reg_int_rst_latch\n"); + goto err_buffer_cleanup; + } + + bmc150_accel_interrupts_setup(indio_dev, data, irq); + + ret = bmc150_accel_triggers_setup(indio_dev, data); + if (ret) + goto err_buffer_cleanup; + } + + ret = pm_runtime_set_active(dev); + if (ret) + goto err_trigger_unregister; + + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, BMC150_AUTO_SUSPEND_DELAY_MS); + pm_runtime_use_autosuspend(dev); + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(dev, "Unable to register iio device\n"); + goto err_pm_cleanup; + } + + return 0; + +err_pm_cleanup: + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_disable(dev); +err_trigger_unregister: + bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1); +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +err_disable_regulators: + regulator_bulk_disable(ARRAY_SIZE(data->regulators), + data->regulators); + + return ret; +} +EXPORT_SYMBOL_NS_GPL(bmc150_accel_core_probe, IIO_BMC150); + +void bmc150_accel_core_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + + bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1); + + iio_triggered_buffer_cleanup(indio_dev); + + mutex_lock(&data->mutex); + bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, 0); + mutex_unlock(&data->mutex); + + regulator_bulk_disable(ARRAY_SIZE(data->regulators), + data->regulators); +} +EXPORT_SYMBOL_NS_GPL(bmc150_accel_core_remove, IIO_BMC150); + +#ifdef CONFIG_PM_SLEEP +static int bmc150_accel_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + + mutex_lock(&data->mutex); + bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0); + mutex_unlock(&data->mutex); + + return 0; +} + +static int bmc150_accel_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + + mutex_lock(&data->mutex); + bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); + bmc150_accel_fifo_set_mode(data); + mutex_unlock(&data->mutex); + + if (data->resume_callback) + data->resume_callback(dev); + + return 0; +} +#endif + +#ifdef CONFIG_PM +static int bmc150_accel_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0); + if (ret < 0) + return -EAGAIN; + + return 0; +} + +static int bmc150_accel_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + int sleep_val; + + ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); + if (ret < 0) + return ret; + ret = bmc150_accel_fifo_set_mode(data); + if (ret < 0) + return ret; + + sleep_val = bmc150_accel_get_startup_times(data); + if (sleep_val < 20) + usleep_range(sleep_val * 1000, 20000); + else + msleep_interruptible(sleep_val); + + return 0; +} +#endif + +const struct dev_pm_ops bmc150_accel_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(bmc150_accel_suspend, bmc150_accel_resume) + SET_RUNTIME_PM_OPS(bmc150_accel_runtime_suspend, + bmc150_accel_runtime_resume, NULL) +}; +EXPORT_SYMBOL_NS_GPL(bmc150_accel_pm_ops, IIO_BMC150); + +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("BMC150 accelerometer driver"); |