summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc/ti-lmp92064.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc/ti-lmp92064.c')
-rw-r--r--drivers/iio/adc/ti-lmp92064.c385
1 files changed, 385 insertions, 0 deletions
diff --git a/drivers/iio/adc/ti-lmp92064.c b/drivers/iio/adc/ti-lmp92064.c
new file mode 100644
index 0000000000..84ba5c4a0e
--- /dev/null
+++ b/drivers/iio/adc/ti-lmp92064.c
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments LMP92064 SPI ADC driver
+ *
+ * Copyright (c) 2022 Leonard Göhrs <kernel@pengutronix.de>, Pengutronix
+ *
+ * Based on linux/drivers/iio/adc/ti-tsc2046.c
+ * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define TI_LMP92064_REG_CONFIG_A 0x0000
+#define TI_LMP92064_REG_CONFIG_B 0x0001
+#define TI_LMP92064_REG_CHIP_REV 0x0006
+
+#define TI_LMP92064_REG_MFR_ID1 0x000C
+#define TI_LMP92064_REG_MFR_ID2 0x000D
+
+#define TI_LMP92064_REG_REG_UPDATE 0x000F
+#define TI_LMP92064_REG_CONFIG_REG 0x0100
+#define TI_LMP92064_REG_STATUS 0x0103
+
+#define TI_LMP92064_REG_DATA_VOUT_LSB 0x0200
+#define TI_LMP92064_REG_DATA_VOUT_MSB 0x0201
+#define TI_LMP92064_REG_DATA_COUT_LSB 0x0202
+#define TI_LMP92064_REG_DATA_COUT_MSB 0x0203
+
+#define TI_LMP92064_VAL_CONFIG_A 0x99
+#define TI_LMP92064_VAL_CONFIG_B 0x00
+#define TI_LMP92064_VAL_STATUS_OK 0x01
+
+/*
+ * Channel number definitions for the two channels of the device
+ * - IN Current (INC)
+ * - IN Voltage (INV)
+ */
+#define TI_LMP92064_CHAN_INC 0
+#define TI_LMP92064_CHAN_INV 1
+
+static const struct regmap_range lmp92064_readable_reg_ranges[] = {
+ regmap_reg_range(TI_LMP92064_REG_CONFIG_A, TI_LMP92064_REG_CHIP_REV),
+ regmap_reg_range(TI_LMP92064_REG_MFR_ID1, TI_LMP92064_REG_MFR_ID2),
+ regmap_reg_range(TI_LMP92064_REG_REG_UPDATE, TI_LMP92064_REG_REG_UPDATE),
+ regmap_reg_range(TI_LMP92064_REG_CONFIG_REG, TI_LMP92064_REG_CONFIG_REG),
+ regmap_reg_range(TI_LMP92064_REG_STATUS, TI_LMP92064_REG_STATUS),
+ regmap_reg_range(TI_LMP92064_REG_DATA_VOUT_LSB, TI_LMP92064_REG_DATA_COUT_MSB),
+};
+
+static const struct regmap_access_table lmp92064_readable_regs = {
+ .yes_ranges = lmp92064_readable_reg_ranges,
+ .n_yes_ranges = ARRAY_SIZE(lmp92064_readable_reg_ranges),
+};
+
+static const struct regmap_range lmp92064_writable_reg_ranges[] = {
+ regmap_reg_range(TI_LMP92064_REG_CONFIG_A, TI_LMP92064_REG_CONFIG_B),
+ regmap_reg_range(TI_LMP92064_REG_REG_UPDATE, TI_LMP92064_REG_REG_UPDATE),
+ regmap_reg_range(TI_LMP92064_REG_CONFIG_REG, TI_LMP92064_REG_CONFIG_REG),
+};
+
+static const struct regmap_access_table lmp92064_writable_regs = {
+ .yes_ranges = lmp92064_writable_reg_ranges,
+ .n_yes_ranges = ARRAY_SIZE(lmp92064_writable_reg_ranges),
+};
+
+static const struct regmap_config lmp92064_spi_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = TI_LMP92064_REG_DATA_COUT_MSB,
+ .rd_table = &lmp92064_readable_regs,
+ .wr_table = &lmp92064_writable_regs,
+};
+
+struct lmp92064_adc_priv {
+ int shunt_resistor_uohm;
+ struct spi_device *spi;
+ struct regmap *regmap;
+};
+
+static const struct iio_chan_spec lmp92064_adc_channels[] = {
+ {
+ .type = IIO_CURRENT,
+ .address = TI_LMP92064_CHAN_INC,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .scan_index = TI_LMP92064_CHAN_INC,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 12,
+ .storagebits = 16,
+ },
+ .datasheet_name = "INC",
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .address = TI_LMP92064_CHAN_INV,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .scan_index = TI_LMP92064_CHAN_INV,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 12,
+ .storagebits = 16,
+ },
+ .datasheet_name = "INV",
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+static const unsigned long lmp92064_scan_masks[] = {
+ BIT(TI_LMP92064_CHAN_INC) | BIT(TI_LMP92064_CHAN_INV),
+ 0
+};
+
+static int lmp92064_read_meas(struct lmp92064_adc_priv *priv, u16 *res)
+{
+ __be16 raw[2];
+ int ret;
+
+ /*
+ * The ADC only latches in new samples if all DATA registers are read
+ * in descending sequential order.
+ * The ADC auto-decrements the register index with each clocked byte.
+ * Read both channels in single SPI transfer by selecting the highest
+ * register using the command below and clocking out all four data
+ * bytes.
+ */
+
+ ret = regmap_bulk_read(priv->regmap, TI_LMP92064_REG_DATA_COUT_MSB,
+ &raw, sizeof(raw));
+
+ if (ret) {
+ dev_err(&priv->spi->dev, "regmap_bulk_read failed: %pe\n",
+ ERR_PTR(ret));
+ return ret;
+ }
+
+ res[0] = be16_to_cpu(raw[0]);
+ res[1] = be16_to_cpu(raw[1]);
+
+ return 0;
+}
+
+static int lmp92064_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct lmp92064_adc_priv *priv = iio_priv(indio_dev);
+ u16 raw[2];
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = lmp92064_read_meas(priv, raw);
+ if (ret < 0)
+ return ret;
+
+ *val = (chan->address == TI_LMP92064_CHAN_INC) ? raw[0] : raw[1];
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ if (chan->address == TI_LMP92064_CHAN_INC) {
+ /*
+ * processed (mA) = raw * current_lsb (mA)
+ * current_lsb (mA) = shunt_voltage_lsb (nV) / shunt_resistor (uOhm)
+ * shunt_voltage_lsb (nV) = 81920000 / 4096 = 20000
+ */
+ *val = 20000;
+ *val2 = priv->shunt_resistor_uohm;
+ } else {
+ /*
+ * processed (mV) = raw * voltage_lsb (mV)
+ * voltage_lsb (mV) = 2048 / 4096
+ */
+ *val = 2048;
+ *val2 = 4096;
+ }
+ return IIO_VAL_FRACTIONAL;
+ default:
+ return -EINVAL;
+ }
+}
+
+static irqreturn_t lmp92064_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct lmp92064_adc_priv *priv = iio_priv(indio_dev);
+ struct {
+ u16 values[2];
+ int64_t timestamp __aligned(8);
+ } data;
+ int ret;
+
+ memset(&data, 0, sizeof(data));
+
+ ret = lmp92064_read_meas(priv, data.values);
+ if (ret)
+ goto err;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &data,
+ iio_get_time_ns(indio_dev));
+
+err:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static int lmp92064_reset(struct lmp92064_adc_priv *priv,
+ struct gpio_desc *gpio_reset)
+{
+ unsigned int status;
+ int ret, i;
+
+ if (gpio_reset) {
+ /*
+ * Perform a hard reset if gpio_reset is available.
+ * The datasheet specifies a very low 3.5ns reset pulse duration and does not
+ * specify how long to wait after a reset to access the device.
+ * Use more conservative pulse lengths to allow analog RC filtering of the
+ * reset line at the board level (as recommended in the datasheet).
+ */
+ gpiod_set_value_cansleep(gpio_reset, 1);
+ usleep_range(1, 10);
+ gpiod_set_value_cansleep(gpio_reset, 0);
+ usleep_range(500, 750);
+ } else {
+ /*
+ * Perform a soft-reset if not.
+ * Also write default values to the config registers that are not
+ * affected by soft reset.
+ */
+ ret = regmap_write(priv->regmap, TI_LMP92064_REG_CONFIG_A,
+ TI_LMP92064_VAL_CONFIG_A);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(priv->regmap, TI_LMP92064_REG_CONFIG_B,
+ TI_LMP92064_VAL_CONFIG_B);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * Wait for the device to signal readiness to prevent reading bogus data
+ * and make sure device is actually connected.
+ * The datasheet does not specify how long this takes but usually it is
+ * not more than 3-4 iterations of this loop.
+ */
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(priv->regmap, TI_LMP92064_REG_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ if (status == TI_LMP92064_VAL_STATUS_OK)
+ return 0;
+
+ usleep_range(1000, 2000);
+ }
+
+ /*
+ * No (correct) response received.
+ * Device is mostly likely not connected to the bus.
+ */
+ return -ENXIO;
+}
+
+static const struct iio_info lmp92064_adc_info = {
+ .read_raw = lmp92064_read_raw,
+};
+
+static int lmp92064_adc_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct lmp92064_adc_priv *priv;
+ struct gpio_desc *gpio_reset;
+ struct iio_dev *indio_dev;
+ u32 shunt_resistor_uohm;
+ struct regmap *regmap;
+ int ret;
+
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Error in SPI setup\n");
+
+ regmap = devm_regmap_init_spi(spi, &lmp92064_spi_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to set up SPI regmap\n");
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ priv = iio_priv(indio_dev);
+
+ priv->spi = spi;
+ priv->regmap = regmap;
+
+ ret = device_property_read_u32(dev, "shunt-resistor-micro-ohms",
+ &shunt_resistor_uohm);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Failed to get shunt-resistor value\n");
+
+ /*
+ * The shunt resistance is passed to userspace as the denominator of an iio
+ * fraction. Make sure it is in range for that.
+ */
+ if (shunt_resistor_uohm == 0 || shunt_resistor_uohm > INT_MAX) {
+ dev_err(dev, "Shunt resistance is out of range\n");
+ return -EINVAL;
+ }
+
+ priv->shunt_resistor_uohm = shunt_resistor_uohm;
+
+ ret = devm_regulator_get_enable(dev, "vdd");
+ if (ret)
+ return ret;
+
+ ret = devm_regulator_get_enable(dev, "vdig");
+ if (ret)
+ return ret;
+
+ gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpio_reset))
+ return dev_err_probe(dev, PTR_ERR(gpio_reset),
+ "Failed to get GPIO reset pin\n");
+
+ ret = lmp92064_reset(priv, gpio_reset);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to reset device\n");
+
+ indio_dev->name = "lmp92064";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = lmp92064_adc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(lmp92064_adc_channels);
+ indio_dev->info = &lmp92064_adc_info;
+ indio_dev->available_scan_masks = lmp92064_scan_masks;
+
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+ lmp92064_trigger_handler, NULL);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to setup buffered read\n");
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct spi_device_id lmp92064_id_table[] = {
+ { "lmp92064" },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, lmp92064_id_table);
+
+static const struct of_device_id lmp92064_of_table[] = {
+ { .compatible = "ti,lmp92064" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, lmp92064_of_table);
+
+static struct spi_driver lmp92064_adc_driver = {
+ .driver = {
+ .name = "lmp92064",
+ .of_match_table = lmp92064_of_table,
+ },
+ .probe = lmp92064_adc_probe,
+ .id_table = lmp92064_id_table,
+};
+module_spi_driver(lmp92064_adc_driver);
+
+MODULE_AUTHOR("Leonard Göhrs <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("TI LMP92064 ADC");
+MODULE_LICENSE("GPL");