summaryrefslogtreecommitdiffstats
path: root/drivers/iio/chemical/sps30_i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/chemical/sps30_i2c.c')
-rw-r--r--drivers/iio/chemical/sps30_i2c.c259
1 files changed, 259 insertions, 0 deletions
diff --git a/drivers/iio/chemical/sps30_i2c.c b/drivers/iio/chemical/sps30_i2c.c
new file mode 100644
index 0000000000..5c31299813
--- /dev/null
+++ b/drivers/iio/chemical/sps30_i2c.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SPS30 particulate matter sensor i2c driver
+ *
+ * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com>
+ *
+ * I2C slave address: 0x69
+ */
+#include <asm/unaligned.h>
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include "sps30.h"
+
+#define SPS30_I2C_CRC8_POLYNOMIAL 0x31
+/* max number of bytes needed to store PM measurements or serial string */
+#define SPS30_I2C_MAX_BUF_SIZE 48
+
+DECLARE_CRC8_TABLE(sps30_i2c_crc8_table);
+
+#define SPS30_I2C_START_MEAS 0x0010
+#define SPS30_I2C_STOP_MEAS 0x0104
+#define SPS30_I2C_READ_MEAS 0x0300
+#define SPS30_I2C_MEAS_READY 0x0202
+#define SPS30_I2C_RESET 0xd304
+#define SPS30_I2C_CLEAN_FAN 0x5607
+#define SPS30_I2C_PERIOD 0x8004
+#define SPS30_I2C_READ_SERIAL 0xd033
+#define SPS30_I2C_READ_VERSION 0xd100
+
+static int sps30_i2c_xfer(struct sps30_state *state, unsigned char *txbuf, size_t txsize,
+ unsigned char *rxbuf, size_t rxsize)
+{
+ struct i2c_client *client = to_i2c_client(state->dev);
+ int ret;
+
+ /*
+ * Sensor does not support repeated start so instead of
+ * sending two i2c messages in a row we just send one by one.
+ */
+ ret = i2c_master_send(client, txbuf, txsize);
+ if (ret < 0)
+ return ret;
+ if (ret != txsize)
+ return -EIO;
+
+ if (!rxsize)
+ return 0;
+
+ ret = i2c_master_recv(client, rxbuf, rxsize);
+ if (ret < 0)
+ return ret;
+ if (ret != rxsize)
+ return -EIO;
+
+ return 0;
+}
+
+static int sps30_i2c_command(struct sps30_state *state, u16 cmd, void *arg, size_t arg_size,
+ void *rsp, size_t rsp_size)
+{
+ /*
+ * Internally sensor stores measurements in a following manner:
+ *
+ * PM1: upper two bytes, crc8, lower two bytes, crc8
+ * PM2P5: upper two bytes, crc8, lower two bytes, crc8
+ * PM4: upper two bytes, crc8, lower two bytes, crc8
+ * PM10: upper two bytes, crc8, lower two bytes, crc8
+ *
+ * What follows next are number concentration measurements and
+ * typical particle size measurement which we omit.
+ */
+ unsigned char buf[SPS30_I2C_MAX_BUF_SIZE];
+ unsigned char *tmp;
+ unsigned char crc;
+ size_t i;
+ int ret;
+
+ put_unaligned_be16(cmd, buf);
+ i = 2;
+
+ if (rsp) {
+ /* each two bytes are followed by a crc8 */
+ rsp_size += rsp_size / 2;
+ } else {
+ tmp = arg;
+
+ while (arg_size) {
+ buf[i] = *tmp++;
+ buf[i + 1] = *tmp++;
+ buf[i + 2] = crc8(sps30_i2c_crc8_table, buf + i, 2, CRC8_INIT_VALUE);
+ arg_size -= 2;
+ i += 3;
+ }
+ }
+
+ ret = sps30_i2c_xfer(state, buf, i, buf, rsp_size);
+ if (ret)
+ return ret;
+
+ /* validate received data and strip off crc bytes */
+ tmp = rsp;
+ for (i = 0; i < rsp_size; i += 3) {
+ crc = crc8(sps30_i2c_crc8_table, buf + i, 2, CRC8_INIT_VALUE);
+ if (crc != buf[i + 2]) {
+ dev_err(state->dev, "data integrity check failed\n");
+ return -EIO;
+ }
+
+ *tmp++ = buf[i];
+ *tmp++ = buf[i + 1];
+ }
+
+ return 0;
+}
+
+static int sps30_i2c_start_meas(struct sps30_state *state)
+{
+ /* request BE IEEE754 formatted data */
+ unsigned char buf[] = { 0x03, 0x00 };
+
+ return sps30_i2c_command(state, SPS30_I2C_START_MEAS, buf, sizeof(buf), NULL, 0);
+}
+
+static int sps30_i2c_stop_meas(struct sps30_state *state)
+{
+ return sps30_i2c_command(state, SPS30_I2C_STOP_MEAS, NULL, 0, NULL, 0);
+}
+
+static int sps30_i2c_reset(struct sps30_state *state)
+{
+ int ret;
+
+ ret = sps30_i2c_command(state, SPS30_I2C_RESET, NULL, 0, NULL, 0);
+ msleep(500);
+ /*
+ * Power-on-reset causes sensor to produce some glitch on i2c bus and
+ * some controllers end up in error state. Recover simply by placing
+ * some data on the bus, for example STOP_MEAS command, which
+ * is NOP in this case.
+ */
+ sps30_i2c_stop_meas(state);
+
+ return ret;
+}
+
+static bool sps30_i2c_meas_ready(struct sps30_state *state)
+{
+ unsigned char buf[2];
+ int ret;
+
+ ret = sps30_i2c_command(state, SPS30_I2C_MEAS_READY, NULL, 0, buf, sizeof(buf));
+ if (ret)
+ return false;
+
+ return buf[1];
+}
+
+static int sps30_i2c_read_meas(struct sps30_state *state, __be32 *meas, size_t num)
+{
+ /* measurements are ready within a second */
+ if (msleep_interruptible(1000))
+ return -EINTR;
+
+ if (!sps30_i2c_meas_ready(state))
+ return -ETIMEDOUT;
+
+ return sps30_i2c_command(state, SPS30_I2C_READ_MEAS, NULL, 0, meas, sizeof(num) * num);
+}
+
+static int sps30_i2c_clean_fan(struct sps30_state *state)
+{
+ return sps30_i2c_command(state, SPS30_I2C_CLEAN_FAN, NULL, 0, NULL, 0);
+}
+
+static int sps30_i2c_read_cleaning_period(struct sps30_state *state, __be32 *period)
+{
+ return sps30_i2c_command(state, SPS30_I2C_PERIOD, NULL, 0, period, sizeof(*period));
+}
+
+static int sps30_i2c_write_cleaning_period(struct sps30_state *state, __be32 period)
+{
+ return sps30_i2c_command(state, SPS30_I2C_PERIOD, &period, sizeof(period), NULL, 0);
+}
+
+static int sps30_i2c_show_info(struct sps30_state *state)
+{
+ /* extra nul just in case */
+ unsigned char buf[32 + 1] = { 0x00 };
+ int ret;
+
+ ret = sps30_i2c_command(state, SPS30_I2C_READ_SERIAL, NULL, 0, buf, sizeof(buf) - 1);
+ if (ret)
+ return ret;
+
+ dev_info(state->dev, "serial number: %s\n", buf);
+
+ ret = sps30_i2c_command(state, SPS30_I2C_READ_VERSION, NULL, 0, buf, 2);
+ if (ret)
+ return ret;
+
+ dev_info(state->dev, "fw version: %u.%u\n", buf[0], buf[1]);
+
+ return 0;
+}
+
+static const struct sps30_ops sps30_i2c_ops = {
+ .start_meas = sps30_i2c_start_meas,
+ .stop_meas = sps30_i2c_stop_meas,
+ .read_meas = sps30_i2c_read_meas,
+ .reset = sps30_i2c_reset,
+ .clean_fan = sps30_i2c_clean_fan,
+ .read_cleaning_period = sps30_i2c_read_cleaning_period,
+ .write_cleaning_period = sps30_i2c_write_cleaning_period,
+ .show_info = sps30_i2c_show_info,
+};
+
+static int sps30_i2c_probe(struct i2c_client *client)
+{
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -EOPNOTSUPP;
+
+ crc8_populate_msb(sps30_i2c_crc8_table, SPS30_I2C_CRC8_POLYNOMIAL);
+
+ return sps30_probe(&client->dev, client->name, NULL, &sps30_i2c_ops);
+}
+
+static const struct i2c_device_id sps30_i2c_id[] = {
+ { "sps30" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sps30_i2c_id);
+
+static const struct of_device_id sps30_i2c_of_match[] = {
+ { .compatible = "sensirion,sps30" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sps30_i2c_of_match);
+
+static struct i2c_driver sps30_i2c_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = sps30_i2c_of_match,
+ },
+ .id_table = sps30_i2c_id,
+ .probe = sps30_i2c_probe,
+};
+module_i2c_driver(sps30_i2c_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>");
+MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor i2c driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_SPS30);