diff options
Diffstat (limited to 'drivers/iio/gyro/st_gyro_core.c')
-rw-r--r-- | drivers/iio/gyro/st_gyro_core.c | 519 |
1 files changed, 519 insertions, 0 deletions
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c new file mode 100644 index 0000000000..eaa35da42b --- /dev/null +++ b/drivers/iio/gyro/st_gyro_core.c @@ -0,0 +1,519 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics gyroscopes driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/sysfs.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_gyro.h" + +#define ST_GYRO_NUMBER_DATA_CHANNELS 3 + +/* DEFAULT VALUE FOR SENSORS */ +#define ST_GYRO_DEFAULT_OUT_X_L_ADDR 0x28 +#define ST_GYRO_DEFAULT_OUT_Y_L_ADDR 0x2a +#define ST_GYRO_DEFAULT_OUT_Z_L_ADDR 0x2c + +/* FULLSCALE */ +#define ST_GYRO_FS_AVL_245DPS 245 +#define ST_GYRO_FS_AVL_250DPS 250 +#define ST_GYRO_FS_AVL_500DPS 500 +#define ST_GYRO_FS_AVL_2000DPS 2000 + +static const struct iio_mount_matrix * +st_gyro_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct st_sensor_data *gdata = iio_priv(indio_dev); + + return &gdata->mount_matrix; +} + +static const struct iio_chan_spec_ext_info st_gyro_mount_matrix_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, st_gyro_get_mount_matrix), + { } +}; + +static const struct iio_chan_spec st_gyro_16bit_channels[] = { + ST_SENSORS_LSM_CHANNELS_EXT(IIO_ANGL_VEL, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16, + ST_GYRO_DEFAULT_OUT_X_L_ADDR, + st_gyro_mount_matrix_ext_info), + ST_SENSORS_LSM_CHANNELS_EXT(IIO_ANGL_VEL, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16, + ST_GYRO_DEFAULT_OUT_Y_L_ADDR, + st_gyro_mount_matrix_ext_info), + ST_SENSORS_LSM_CHANNELS_EXT(IIO_ANGL_VEL, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16, + ST_GYRO_DEFAULT_OUT_Z_L_ADDR, + st_gyro_mount_matrix_ext_info), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct st_sensor_settings st_gyro_sensors_settings[] = { + { + .wai = 0xd3, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = L3G4200D_GYRO_DEV_NAME, + [1] = LSM330DL_GYRO_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, + .odr = { + .addr = 0x20, + .mask = 0xc0, + .odr_avl = { + { .hz = 100, .value = 0x00, }, + { .hz = 200, .value = 0x01, }, + { .hz = 400, .value = 0x02, }, + { .hz = 800, .value = 0x03, }, + }, + }, + .pw = { + .addr = 0x20, + .mask = 0x08, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = 0x23, + .mask = 0x30, + .fs_avl = { + [0] = { + .num = ST_GYRO_FS_AVL_250DPS, + .value = 0x00, + .gain = IIO_DEGREE_TO_RAD(8750), + }, + [1] = { + .num = ST_GYRO_FS_AVL_500DPS, + .value = 0x01, + .gain = IIO_DEGREE_TO_RAD(17500), + }, + [2] = { + .num = ST_GYRO_FS_AVL_2000DPS, + .value = 0x02, + .gain = IIO_DEGREE_TO_RAD(70000), + }, + }, + }, + .bdu = { + .addr = 0x23, + .mask = 0x80, + }, + .drdy_irq = { + .int2 = { + .addr = 0x22, + .mask = 0x08, + }, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, + }, + .sim = { + .addr = 0x23, + .value = BIT(0), + }, + .multi_read_bit = true, + .bootime = 2, + }, + { + .wai = 0xd4, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = L3GD20_GYRO_DEV_NAME, + [1] = LSM330D_GYRO_DEV_NAME, + [2] = LSM330DLC_GYRO_DEV_NAME, + [3] = L3G4IS_GYRO_DEV_NAME, + [4] = LSM330_GYRO_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, + .odr = { + .addr = 0x20, + .mask = 0xc0, + .odr_avl = { + { .hz = 95, .value = 0x00, }, + { .hz = 190, .value = 0x01, }, + { .hz = 380, .value = 0x02, }, + { .hz = 760, .value = 0x03, }, + }, + }, + .pw = { + .addr = 0x20, + .mask = 0x08, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = 0x23, + .mask = 0x30, + .fs_avl = { + [0] = { + .num = ST_GYRO_FS_AVL_250DPS, + .value = 0x00, + .gain = IIO_DEGREE_TO_RAD(8750), + }, + [1] = { + .num = ST_GYRO_FS_AVL_500DPS, + .value = 0x01, + .gain = IIO_DEGREE_TO_RAD(17500), + }, + [2] = { + .num = ST_GYRO_FS_AVL_2000DPS, + .value = 0x02, + .gain = IIO_DEGREE_TO_RAD(70000), + }, + }, + }, + .bdu = { + .addr = 0x23, + .mask = 0x80, + }, + .drdy_irq = { + .int2 = { + .addr = 0x22, + .mask = 0x08, + }, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, + }, + .sim = { + .addr = 0x23, + .value = BIT(0), + }, + .multi_read_bit = true, + .bootime = 2, + }, + { + .wai = 0xd4, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LSM9DS0_GYRO_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, + .odr = { + .addr = 0x20, + .mask = GENMASK(7, 6), + .odr_avl = { + { .hz = 95, .value = 0x00, }, + { .hz = 190, .value = 0x01, }, + { .hz = 380, .value = 0x02, }, + { .hz = 760, .value = 0x03, }, + }, + }, + .pw = { + .addr = 0x20, + .mask = BIT(3), + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = 0x23, + .mask = GENMASK(5, 4), + .fs_avl = { + [0] = { + .num = ST_GYRO_FS_AVL_245DPS, + .value = 0x00, + .gain = IIO_DEGREE_TO_RAD(8750), + }, + [1] = { + .num = ST_GYRO_FS_AVL_500DPS, + .value = 0x01, + .gain = IIO_DEGREE_TO_RAD(17500), + }, + [2] = { + .num = ST_GYRO_FS_AVL_2000DPS, + .value = 0x02, + .gain = IIO_DEGREE_TO_RAD(70000), + }, + }, + }, + .bdu = { + .addr = 0x23, + .mask = BIT(7), + }, + .drdy_irq = { + .int2 = { + .addr = 0x22, + .mask = BIT(3), + }, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = GENMASK(2, 0), + }, + }, + .sim = { + .addr = 0x23, + .value = BIT(0), + }, + .multi_read_bit = true, + .bootime = 2, + }, + { + .wai = 0xd7, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = L3GD20H_GYRO_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, + .odr = { + .addr = 0x20, + .mask = 0xc0, + .odr_avl = { + { .hz = 100, .value = 0x00, }, + { .hz = 200, .value = 0x01, }, + { .hz = 400, .value = 0x02, }, + { .hz = 800, .value = 0x03, }, + }, + }, + .pw = { + .addr = 0x20, + .mask = 0x08, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = 0x23, + .mask = 0x30, + .fs_avl = { + [0] = { + .num = ST_GYRO_FS_AVL_245DPS, + .value = 0x00, + .gain = IIO_DEGREE_TO_RAD(8750), + }, + [1] = { + .num = ST_GYRO_FS_AVL_500DPS, + .value = 0x01, + .gain = IIO_DEGREE_TO_RAD(17500), + }, + [2] = { + .num = ST_GYRO_FS_AVL_2000DPS, + .value = 0x02, + .gain = IIO_DEGREE_TO_RAD(70000), + }, + }, + }, + .bdu = { + .addr = 0x23, + .mask = 0x80, + }, + .drdy_irq = { + .int2 = { + .addr = 0x22, + .mask = 0x08, + }, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, + }, + .sim = { + .addr = 0x23, + .value = BIT(0), + }, + .multi_read_bit = true, + .bootime = 2, + }, +}; + +/* DRDY on gyros is available only on INT2 pin */ +static const struct st_sensors_platform_data gyro_pdata = { + .drdy_int_pin = 2, +}; + +static int st_gyro_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val, + int *val2, long mask) +{ + int err; + struct st_sensor_data *gdata = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + err = st_sensors_read_info_raw(indio_dev, ch, val); + if (err < 0) + goto read_error; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = gdata->current_fullscale->gain; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = gdata->odr; + return IIO_VAL_INT; + default: + return -EINVAL; + } + +read_error: + return err; +} + +static int st_gyro_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return st_sensors_set_fullscale_by_gain(indio_dev, val2); + case IIO_CHAN_INFO_SAMP_FREQ: + if (val2) + return -EINVAL; + + return st_sensors_set_odr(indio_dev, val); + default: + return -EINVAL; + } +} + +static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL(); +static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_anglvel_scale_available); + +static struct attribute *st_gyro_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_anglvel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_gyro_attribute_group = { + .attrs = st_gyro_attributes, +}; + +static const struct iio_info gyro_info = { + .attrs = &st_gyro_attribute_group, + .read_raw = &st_gyro_read_raw, + .write_raw = &st_gyro_write_raw, + .debugfs_reg_access = &st_sensors_debugfs_reg_access, +}; + +#ifdef CONFIG_IIO_TRIGGER +static const struct iio_trigger_ops st_gyro_trigger_ops = { + .set_trigger_state = ST_GYRO_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, +}; +#define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops) +#else +#define ST_GYRO_TRIGGER_OPS NULL +#endif + +/* + * st_gyro_get_settings() - get sensor settings from device name + * @name: device name buffer reference. + * + * Return: valid reference on success, NULL otherwise. + */ +const struct st_sensor_settings *st_gyro_get_settings(const char *name) +{ + int index = st_sensors_get_settings_index(name, + st_gyro_sensors_settings, + ARRAY_SIZE(st_gyro_sensors_settings)); + if (index < 0) + return NULL; + + return &st_gyro_sensors_settings[index]; +} +EXPORT_SYMBOL_NS(st_gyro_get_settings, IIO_ST_SENSORS); + +int st_gyro_common_probe(struct iio_dev *indio_dev) +{ + struct st_sensor_data *gdata = iio_priv(indio_dev); + struct st_sensors_platform_data *pdata; + struct device *parent = indio_dev->dev.parent; + int err; + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &gyro_info; + + err = st_sensors_verify_id(indio_dev); + if (err < 0) + return err; + + gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS; + indio_dev->channels = gdata->sensor_settings->ch; + indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS; + + err = iio_read_mount_matrix(parent, &gdata->mount_matrix); + if (err) + return err; + + gdata->current_fullscale = &gdata->sensor_settings->fs.fs_avl[0]; + gdata->odr = gdata->sensor_settings->odr.odr_avl[0].hz; + + pdata = (struct st_sensors_platform_data *)&gyro_pdata; + + err = st_sensors_init_sensor(indio_dev, pdata); + if (err < 0) + return err; + + err = st_gyro_allocate_ring(indio_dev); + if (err < 0) + return err; + + if (gdata->irq > 0) { + err = st_sensors_allocate_trigger(indio_dev, + ST_GYRO_TRIGGER_OPS); + if (err < 0) + return err; + } + + return devm_iio_device_register(parent, indio_dev); +} +EXPORT_SYMBOL_NS(st_gyro_common_probe, IIO_ST_SENSORS); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics gyroscopes driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_ST_SENSORS); |