diff options
Diffstat (limited to 'drivers/iio/imu/bmi160/bmi160_core.c')
-rw-r--r-- | drivers/iio/imu/bmi160/bmi160_core.c | 891 |
1 files changed, 891 insertions, 0 deletions
diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c new file mode 100644 index 0000000000..a77f1a8348 --- /dev/null +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -0,0 +1,891 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * BMI160 - Bosch IMU (accel, gyro plus external magnetometer) + * + * Copyright (c) 2016, Intel Corporation. + * Copyright (c) 2019, Martin Kelly. + * + * IIO core driver for BMI160, with support for I2C/SPI busses + * + * TODO: magnetometer, hardware FIFO + */ +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> + +#include <linux/iio/iio.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> + +#include "bmi160.h" + +#define BMI160_REG_CHIP_ID 0x00 +#define BMI160_CHIP_ID_VAL 0xD1 + +#define BMI160_REG_PMU_STATUS 0x03 + +/* X axis data low byte address, the rest can be obtained using axis offset */ +#define BMI160_REG_DATA_MAGN_XOUT_L 0x04 +#define BMI160_REG_DATA_GYRO_XOUT_L 0x0C +#define BMI160_REG_DATA_ACCEL_XOUT_L 0x12 + +#define BMI160_REG_ACCEL_CONFIG 0x40 +#define BMI160_ACCEL_CONFIG_ODR_MASK GENMASK(3, 0) +#define BMI160_ACCEL_CONFIG_BWP_MASK GENMASK(6, 4) + +#define BMI160_REG_ACCEL_RANGE 0x41 +#define BMI160_ACCEL_RANGE_2G 0x03 +#define BMI160_ACCEL_RANGE_4G 0x05 +#define BMI160_ACCEL_RANGE_8G 0x08 +#define BMI160_ACCEL_RANGE_16G 0x0C + +#define BMI160_REG_GYRO_CONFIG 0x42 +#define BMI160_GYRO_CONFIG_ODR_MASK GENMASK(3, 0) +#define BMI160_GYRO_CONFIG_BWP_MASK GENMASK(5, 4) + +#define BMI160_REG_GYRO_RANGE 0x43 +#define BMI160_GYRO_RANGE_2000DPS 0x00 +#define BMI160_GYRO_RANGE_1000DPS 0x01 +#define BMI160_GYRO_RANGE_500DPS 0x02 +#define BMI160_GYRO_RANGE_250DPS 0x03 +#define BMI160_GYRO_RANGE_125DPS 0x04 + +#define BMI160_REG_CMD 0x7E +#define BMI160_CMD_ACCEL_PM_SUSPEND 0x10 +#define BMI160_CMD_ACCEL_PM_NORMAL 0x11 +#define BMI160_CMD_ACCEL_PM_LOW_POWER 0x12 +#define BMI160_CMD_GYRO_PM_SUSPEND 0x14 +#define BMI160_CMD_GYRO_PM_NORMAL 0x15 +#define BMI160_CMD_GYRO_PM_FAST_STARTUP 0x17 +#define BMI160_CMD_SOFTRESET 0xB6 + +#define BMI160_REG_INT_EN 0x51 +#define BMI160_DRDY_INT_EN BIT(4) + +#define BMI160_REG_INT_OUT_CTRL 0x53 +#define BMI160_INT_OUT_CTRL_MASK 0x0f +#define BMI160_INT1_OUT_CTRL_SHIFT 0 +#define BMI160_INT2_OUT_CTRL_SHIFT 4 +#define BMI160_EDGE_TRIGGERED BIT(0) +#define BMI160_ACTIVE_HIGH BIT(1) +#define BMI160_OPEN_DRAIN BIT(2) +#define BMI160_OUTPUT_EN BIT(3) + +#define BMI160_REG_INT_LATCH 0x54 +#define BMI160_INT1_LATCH_MASK BIT(4) +#define BMI160_INT2_LATCH_MASK BIT(5) + +/* INT1 and INT2 are in the opposite order as in INT_OUT_CTRL! */ +#define BMI160_REG_INT_MAP 0x56 +#define BMI160_INT1_MAP_DRDY_EN 0x80 +#define BMI160_INT2_MAP_DRDY_EN 0x08 + +#define BMI160_REG_DUMMY 0x7F + +#define BMI160_NORMAL_WRITE_USLEEP 2 +#define BMI160_SUSPENDED_WRITE_USLEEP 450 + +#define BMI160_ACCEL_PMU_MIN_USLEEP 3800 +#define BMI160_GYRO_PMU_MIN_USLEEP 80000 +#define BMI160_SOFTRESET_USLEEP 1000 + +#define BMI160_CHANNEL(_type, _axis, _index) { \ + .type = _type, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ + .ext_info = bmi160_ext_info, \ +} + +/* scan indexes follow DATA register order */ +enum bmi160_scan_axis { + BMI160_SCAN_EXT_MAGN_X = 0, + BMI160_SCAN_EXT_MAGN_Y, + BMI160_SCAN_EXT_MAGN_Z, + BMI160_SCAN_RHALL, + BMI160_SCAN_GYRO_X, + BMI160_SCAN_GYRO_Y, + BMI160_SCAN_GYRO_Z, + BMI160_SCAN_ACCEL_X, + BMI160_SCAN_ACCEL_Y, + BMI160_SCAN_ACCEL_Z, + BMI160_SCAN_TIMESTAMP, +}; + +enum bmi160_sensor_type { + BMI160_ACCEL = 0, + BMI160_GYRO, + BMI160_EXT_MAGN, + BMI160_NUM_SENSORS /* must be last */ +}; + +enum bmi160_int_pin { + BMI160_PIN_INT1, + BMI160_PIN_INT2 +}; + +const struct regmap_config bmi160_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; +EXPORT_SYMBOL_NS(bmi160_regmap_config, IIO_BMI160); + +struct bmi160_regs { + u8 data; /* LSB byte register for X-axis */ + u8 config; + u8 config_odr_mask; + u8 config_bwp_mask; + u8 range; + u8 pmu_cmd_normal; + u8 pmu_cmd_suspend; +}; + +static struct bmi160_regs bmi160_regs[] = { + [BMI160_ACCEL] = { + .data = BMI160_REG_DATA_ACCEL_XOUT_L, + .config = BMI160_REG_ACCEL_CONFIG, + .config_odr_mask = BMI160_ACCEL_CONFIG_ODR_MASK, + .config_bwp_mask = BMI160_ACCEL_CONFIG_BWP_MASK, + .range = BMI160_REG_ACCEL_RANGE, + .pmu_cmd_normal = BMI160_CMD_ACCEL_PM_NORMAL, + .pmu_cmd_suspend = BMI160_CMD_ACCEL_PM_SUSPEND, + }, + [BMI160_GYRO] = { + .data = BMI160_REG_DATA_GYRO_XOUT_L, + .config = BMI160_REG_GYRO_CONFIG, + .config_odr_mask = BMI160_GYRO_CONFIG_ODR_MASK, + .config_bwp_mask = BMI160_GYRO_CONFIG_BWP_MASK, + .range = BMI160_REG_GYRO_RANGE, + .pmu_cmd_normal = BMI160_CMD_GYRO_PM_NORMAL, + .pmu_cmd_suspend = BMI160_CMD_GYRO_PM_SUSPEND, + }, +}; + +static unsigned long bmi160_pmu_time[] = { + [BMI160_ACCEL] = BMI160_ACCEL_PMU_MIN_USLEEP, + [BMI160_GYRO] = BMI160_GYRO_PMU_MIN_USLEEP, +}; + +struct bmi160_scale { + u8 bits; + int uscale; +}; + +struct bmi160_odr { + u8 bits; + int odr; + int uodr; +}; + +static const struct bmi160_scale bmi160_accel_scale[] = { + { BMI160_ACCEL_RANGE_2G, 598}, + { BMI160_ACCEL_RANGE_4G, 1197}, + { BMI160_ACCEL_RANGE_8G, 2394}, + { BMI160_ACCEL_RANGE_16G, 4788}, +}; + +static const struct bmi160_scale bmi160_gyro_scale[] = { + { BMI160_GYRO_RANGE_2000DPS, 1065}, + { BMI160_GYRO_RANGE_1000DPS, 532}, + { BMI160_GYRO_RANGE_500DPS, 266}, + { BMI160_GYRO_RANGE_250DPS, 133}, + { BMI160_GYRO_RANGE_125DPS, 66}, +}; + +struct bmi160_scale_item { + const struct bmi160_scale *tbl; + int num; +}; + +static const struct bmi160_scale_item bmi160_scale_table[] = { + [BMI160_ACCEL] = { + .tbl = bmi160_accel_scale, + .num = ARRAY_SIZE(bmi160_accel_scale), + }, + [BMI160_GYRO] = { + .tbl = bmi160_gyro_scale, + .num = ARRAY_SIZE(bmi160_gyro_scale), + }, +}; + +static const struct bmi160_odr bmi160_accel_odr[] = { + {0x01, 0, 781250}, + {0x02, 1, 562500}, + {0x03, 3, 125000}, + {0x04, 6, 250000}, + {0x05, 12, 500000}, + {0x06, 25, 0}, + {0x07, 50, 0}, + {0x08, 100, 0}, + {0x09, 200, 0}, + {0x0A, 400, 0}, + {0x0B, 800, 0}, + {0x0C, 1600, 0}, +}; + +static const struct bmi160_odr bmi160_gyro_odr[] = { + {0x06, 25, 0}, + {0x07, 50, 0}, + {0x08, 100, 0}, + {0x09, 200, 0}, + {0x0A, 400, 0}, + {0x0B, 800, 0}, + {0x0C, 1600, 0}, + {0x0D, 3200, 0}, +}; + +struct bmi160_odr_item { + const struct bmi160_odr *tbl; + int num; +}; + +static const struct bmi160_odr_item bmi160_odr_table[] = { + [BMI160_ACCEL] = { + .tbl = bmi160_accel_odr, + .num = ARRAY_SIZE(bmi160_accel_odr), + }, + [BMI160_GYRO] = { + .tbl = bmi160_gyro_odr, + .num = ARRAY_SIZE(bmi160_gyro_odr), + }, +}; + +static const struct iio_mount_matrix * +bmi160_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct bmi160_data *data = iio_priv(indio_dev); + + return &data->orientation; +} + +static const struct iio_chan_spec_ext_info bmi160_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bmi160_get_mount_matrix), + { } +}; + +static const struct iio_chan_spec bmi160_channels[] = { + BMI160_CHANNEL(IIO_ACCEL, X, BMI160_SCAN_ACCEL_X), + BMI160_CHANNEL(IIO_ACCEL, Y, BMI160_SCAN_ACCEL_Y), + BMI160_CHANNEL(IIO_ACCEL, Z, BMI160_SCAN_ACCEL_Z), + BMI160_CHANNEL(IIO_ANGL_VEL, X, BMI160_SCAN_GYRO_X), + BMI160_CHANNEL(IIO_ANGL_VEL, Y, BMI160_SCAN_GYRO_Y), + BMI160_CHANNEL(IIO_ANGL_VEL, Z, BMI160_SCAN_GYRO_Z), + IIO_CHAN_SOFT_TIMESTAMP(BMI160_SCAN_TIMESTAMP), +}; + +static enum bmi160_sensor_type bmi160_to_sensor(enum iio_chan_type iio_type) +{ + switch (iio_type) { + case IIO_ACCEL: + return BMI160_ACCEL; + case IIO_ANGL_VEL: + return BMI160_GYRO; + default: + return -EINVAL; + } +} + +static +int bmi160_set_mode(struct bmi160_data *data, enum bmi160_sensor_type t, + bool mode) +{ + int ret; + u8 cmd; + + if (mode) + cmd = bmi160_regs[t].pmu_cmd_normal; + else + cmd = bmi160_regs[t].pmu_cmd_suspend; + + ret = regmap_write(data->regmap, BMI160_REG_CMD, cmd); + if (ret) + return ret; + + usleep_range(bmi160_pmu_time[t], bmi160_pmu_time[t] + 1000); + + return 0; +} + +static +int bmi160_set_scale(struct bmi160_data *data, enum bmi160_sensor_type t, + int uscale) +{ + int i; + + for (i = 0; i < bmi160_scale_table[t].num; i++) + if (bmi160_scale_table[t].tbl[i].uscale == uscale) + break; + + if (i == bmi160_scale_table[t].num) + return -EINVAL; + + return regmap_write(data->regmap, bmi160_regs[t].range, + bmi160_scale_table[t].tbl[i].bits); +} + +static +int bmi160_get_scale(struct bmi160_data *data, enum bmi160_sensor_type t, + int *uscale) +{ + int i, ret, val; + + ret = regmap_read(data->regmap, bmi160_regs[t].range, &val); + if (ret) + return ret; + + for (i = 0; i < bmi160_scale_table[t].num; i++) + if (bmi160_scale_table[t].tbl[i].bits == val) { + *uscale = bmi160_scale_table[t].tbl[i].uscale; + return 0; + } + + return -EINVAL; +} + +static int bmi160_get_data(struct bmi160_data *data, int chan_type, + int axis, int *val) +{ + u8 reg; + int ret; + __le16 sample; + enum bmi160_sensor_type t = bmi160_to_sensor(chan_type); + + reg = bmi160_regs[t].data + (axis - IIO_MOD_X) * sizeof(sample); + + ret = regmap_bulk_read(data->regmap, reg, &sample, sizeof(sample)); + if (ret) + return ret; + + *val = sign_extend32(le16_to_cpu(sample), 15); + + return 0; +} + +static +int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t, + int odr, int uodr) +{ + int i; + + for (i = 0; i < bmi160_odr_table[t].num; i++) + if (bmi160_odr_table[t].tbl[i].odr == odr && + bmi160_odr_table[t].tbl[i].uodr == uodr) + break; + + if (i >= bmi160_odr_table[t].num) + return -EINVAL; + + return regmap_update_bits(data->regmap, + bmi160_regs[t].config, + bmi160_regs[t].config_odr_mask, + bmi160_odr_table[t].tbl[i].bits); +} + +static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t, + int *odr, int *uodr) +{ + int i, val, ret; + + ret = regmap_read(data->regmap, bmi160_regs[t].config, &val); + if (ret) + return ret; + + val &= bmi160_regs[t].config_odr_mask; + + for (i = 0; i < bmi160_odr_table[t].num; i++) + if (val == bmi160_odr_table[t].tbl[i].bits) + break; + + if (i >= bmi160_odr_table[t].num) + return -EINVAL; + + *odr = bmi160_odr_table[t].tbl[i].odr; + *uodr = bmi160_odr_table[t].tbl[i].uodr; + + return 0; +} + +static irqreturn_t bmi160_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmi160_data *data = iio_priv(indio_dev); + int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L; + __le16 sample; + + for_each_set_bit(i, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = regmap_bulk_read(data->regmap, base + i * sizeof(sample), + &sample, sizeof(sample)); + if (ret) + goto done; + data->buf[j++] = sample; + } + + iio_push_to_buffers_with_timestamp(indio_dev, data->buf, pf->timestamp); +done: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int bmi160_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + struct bmi160_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = bmi160_get_data(data, chan->type, chan->channel2, val); + if (ret) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + ret = bmi160_get_scale(data, + bmi160_to_sensor(chan->type), val2); + return ret ? ret : IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = bmi160_get_odr(data, bmi160_to_sensor(chan->type), + val, val2); + return ret ? ret : IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + + return 0; +} + +static int bmi160_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bmi160_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return bmi160_set_scale(data, + bmi160_to_sensor(chan->type), val2); + case IIO_CHAN_INFO_SAMP_FREQ: + return bmi160_set_odr(data, bmi160_to_sensor(chan->type), + val, val2); + default: + return -EINVAL; + } + + return 0; +} + +static +IIO_CONST_ATTR(in_accel_sampling_frequency_available, + "0.78125 1.5625 3.125 6.25 12.5 25 50 100 200 400 800 1600"); +static +IIO_CONST_ATTR(in_anglvel_sampling_frequency_available, + "25 50 100 200 400 800 1600 3200"); +static +IIO_CONST_ATTR(in_accel_scale_available, + "0.000598 0.001197 0.002394 0.004788"); +static +IIO_CONST_ATTR(in_anglvel_scale_available, + "0.001065 0.000532 0.000266 0.000133 0.000066"); + +static struct attribute *bmi160_attrs[] = { + &iio_const_attr_in_accel_sampling_frequency_available.dev_attr.attr, + &iio_const_attr_in_anglvel_sampling_frequency_available.dev_attr.attr, + &iio_const_attr_in_accel_scale_available.dev_attr.attr, + &iio_const_attr_in_anglvel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bmi160_attrs_group = { + .attrs = bmi160_attrs, +}; + +static const struct iio_info bmi160_info = { + .read_raw = bmi160_read_raw, + .write_raw = bmi160_write_raw, + .attrs = &bmi160_attrs_group, +}; + +static int bmi160_write_conf_reg(struct regmap *regmap, unsigned int reg, + unsigned int mask, unsigned int bits, + unsigned int write_usleep) +{ + int ret; + unsigned int val; + + ret = regmap_read(regmap, reg, &val); + if (ret) + return ret; + + val = (val & ~mask) | bits; + + ret = regmap_write(regmap, reg, val); + if (ret) + return ret; + + /* + * We need to wait after writing before we can write again. See the + * datasheet, page 93. + */ + usleep_range(write_usleep, write_usleep + 1000); + + return 0; +} + +static int bmi160_config_pin(struct regmap *regmap, enum bmi160_int_pin pin, + bool open_drain, u8 irq_mask, + unsigned long write_usleep) +{ + int ret; + struct device *dev = regmap_get_device(regmap); + u8 int_out_ctrl_shift; + u8 int_latch_mask; + u8 int_map_mask; + u8 int_out_ctrl_mask; + u8 int_out_ctrl_bits; + const char *pin_name; + + switch (pin) { + case BMI160_PIN_INT1: + int_out_ctrl_shift = BMI160_INT1_OUT_CTRL_SHIFT; + int_latch_mask = BMI160_INT1_LATCH_MASK; + int_map_mask = BMI160_INT1_MAP_DRDY_EN; + break; + case BMI160_PIN_INT2: + int_out_ctrl_shift = BMI160_INT2_OUT_CTRL_SHIFT; + int_latch_mask = BMI160_INT2_LATCH_MASK; + int_map_mask = BMI160_INT2_MAP_DRDY_EN; + break; + } + int_out_ctrl_mask = BMI160_INT_OUT_CTRL_MASK << int_out_ctrl_shift; + + /* + * Enable the requested pin with the right settings: + * - Push-pull/open-drain + * - Active low/high + * - Edge/level triggered + */ + int_out_ctrl_bits = BMI160_OUTPUT_EN; + if (open_drain) + /* Default is push-pull. */ + int_out_ctrl_bits |= BMI160_OPEN_DRAIN; + int_out_ctrl_bits |= irq_mask; + int_out_ctrl_bits <<= int_out_ctrl_shift; + + ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_OUT_CTRL, + int_out_ctrl_mask, int_out_ctrl_bits, + write_usleep); + if (ret) + return ret; + + /* Set the pin to input mode with no latching. */ + ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_LATCH, + int_latch_mask, int_latch_mask, + write_usleep); + if (ret) + return ret; + + /* Map interrupts to the requested pin. */ + ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_MAP, + int_map_mask, int_map_mask, + write_usleep); + if (ret) { + switch (pin) { + case BMI160_PIN_INT1: + pin_name = "INT1"; + break; + case BMI160_PIN_INT2: + pin_name = "INT2"; + break; + } + dev_err(dev, "Failed to configure %s IRQ pin", pin_name); + } + + return ret; +} + +int bmi160_enable_irq(struct regmap *regmap, bool enable) +{ + unsigned int enable_bit = 0; + + if (enable) + enable_bit = BMI160_DRDY_INT_EN; + + return bmi160_write_conf_reg(regmap, BMI160_REG_INT_EN, + BMI160_DRDY_INT_EN, enable_bit, + BMI160_NORMAL_WRITE_USLEEP); +} +EXPORT_SYMBOL_NS(bmi160_enable_irq, IIO_BMI160); + +static int bmi160_get_irq(struct fwnode_handle *fwnode, enum bmi160_int_pin *pin) +{ + int irq; + + /* Use INT1 if possible, otherwise fall back to INT2. */ + irq = fwnode_irq_get_byname(fwnode, "INT1"); + if (irq > 0) { + *pin = BMI160_PIN_INT1; + return irq; + } + + irq = fwnode_irq_get_byname(fwnode, "INT2"); + if (irq > 0) + *pin = BMI160_PIN_INT2; + + return irq; +} + +static int bmi160_config_device_irq(struct iio_dev *indio_dev, int irq_type, + enum bmi160_int_pin pin) +{ + bool open_drain; + u8 irq_mask; + struct bmi160_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); + + /* Level-triggered, active-low is the default if we set all zeroes. */ + if (irq_type == IRQF_TRIGGER_RISING) + irq_mask = BMI160_ACTIVE_HIGH | BMI160_EDGE_TRIGGERED; + else if (irq_type == IRQF_TRIGGER_FALLING) + irq_mask = BMI160_EDGE_TRIGGERED; + else if (irq_type == IRQF_TRIGGER_HIGH) + irq_mask = BMI160_ACTIVE_HIGH; + else if (irq_type == IRQF_TRIGGER_LOW) + irq_mask = 0; + else { + dev_err(&indio_dev->dev, + "Invalid interrupt type 0x%x specified\n", irq_type); + return -EINVAL; + } + + open_drain = device_property_read_bool(dev, "drive-open-drain"); + + return bmi160_config_pin(data->regmap, pin, open_drain, irq_mask, + BMI160_NORMAL_WRITE_USLEEP); +} + +static int bmi160_setup_irq(struct iio_dev *indio_dev, int irq, + enum bmi160_int_pin pin) +{ + struct irq_data *desc; + u32 irq_type; + int ret; + + desc = irq_get_irq_data(irq); + if (!desc) { + dev_err(&indio_dev->dev, "Could not find IRQ %d\n", irq); + return -EINVAL; + } + + irq_type = irqd_get_trigger_type(desc); + + ret = bmi160_config_device_irq(indio_dev, irq_type, pin); + if (ret) + return ret; + + return bmi160_probe_trigger(indio_dev, irq, irq_type); +} + +static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) +{ + int ret; + unsigned int val; + struct device *dev = regmap_get_device(data->regmap); + + ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies); + if (ret) { + dev_err(dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + + ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET); + if (ret) + goto disable_regulator; + + usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1); + + /* + * CS rising edge is needed before starting SPI, so do a dummy read + * See Section 3.2.1, page 86 of the datasheet + */ + if (use_spi) { + ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val); + if (ret) + goto disable_regulator; + } + + ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val); + if (ret) { + dev_err(dev, "Error reading chip id\n"); + goto disable_regulator; + } + if (val != BMI160_CHIP_ID_VAL) { + dev_err(dev, "Wrong chip id, got %x expected %x\n", + val, BMI160_CHIP_ID_VAL); + ret = -ENODEV; + goto disable_regulator; + } + + ret = bmi160_set_mode(data, BMI160_ACCEL, true); + if (ret) + goto disable_regulator; + + ret = bmi160_set_mode(data, BMI160_GYRO, true); + if (ret) + goto disable_accel; + + return 0; + +disable_accel: + bmi160_set_mode(data, BMI160_ACCEL, false); + +disable_regulator: + regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies); + return ret; +} + +static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool enable) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct bmi160_data *data = iio_priv(indio_dev); + + return bmi160_enable_irq(data->regmap, enable); +} + +static const struct iio_trigger_ops bmi160_trigger_ops = { + .set_trigger_state = &bmi160_data_rdy_trigger_set_state, +}; + +int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type) +{ + struct bmi160_data *data = iio_priv(indio_dev); + int ret; + + data->trig = devm_iio_trigger_alloc(&indio_dev->dev, "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + + if (data->trig == NULL) + return -ENOMEM; + + ret = devm_request_irq(&indio_dev->dev, irq, + &iio_trigger_generic_data_rdy_poll, + irq_type, "bmi160", data->trig); + if (ret) + return ret; + + data->trig->dev.parent = regmap_get_device(data->regmap); + data->trig->ops = &bmi160_trigger_ops; + iio_trigger_set_drvdata(data->trig, indio_dev); + + ret = devm_iio_trigger_register(&indio_dev->dev, data->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(data->trig); + + return 0; +} + +static void bmi160_chip_uninit(void *data) +{ + struct bmi160_data *bmi_data = data; + struct device *dev = regmap_get_device(bmi_data->regmap); + int ret; + + bmi160_set_mode(bmi_data, BMI160_GYRO, false); + bmi160_set_mode(bmi_data, BMI160_ACCEL, false); + + ret = regulator_bulk_disable(ARRAY_SIZE(bmi_data->supplies), + bmi_data->supplies); + if (ret) + dev_err(dev, "Failed to disable regulators: %d\n", ret); +} + +int bmi160_core_probe(struct device *dev, struct regmap *regmap, + const char *name, bool use_spi) +{ + struct iio_dev *indio_dev; + struct bmi160_data *data; + int irq; + enum bmi160_int_pin int_pin; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + data->regmap = regmap; + + data->supplies[0].supply = "vdd"; + data->supplies[1].supply = "vddio"; + ret = devm_regulator_bulk_get(dev, + ARRAY_SIZE(data->supplies), + data->supplies); + if (ret) { + dev_err(dev, "Failed to get regulators: %d\n", ret); + return ret; + } + + ret = iio_read_mount_matrix(dev, &data->orientation); + if (ret) + return ret; + + ret = bmi160_chip_init(data, use_spi); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, bmi160_chip_uninit, data); + if (ret) + return ret; + + indio_dev->channels = bmi160_channels; + indio_dev->num_channels = ARRAY_SIZE(bmi160_channels); + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &bmi160_info; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + iio_pollfunc_store_time, + bmi160_trigger_handler, NULL); + if (ret) + return ret; + + irq = bmi160_get_irq(dev_fwnode(dev), &int_pin); + if (irq > 0) { + ret = bmi160_setup_irq(indio_dev, irq, int_pin); + if (ret) + dev_err(&indio_dev->dev, "Failed to setup IRQ %d\n", + irq); + } else { + dev_info(&indio_dev->dev, "Not setting up IRQ trigger\n"); + } + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_NS_GPL(bmi160_core_probe, IIO_BMI160); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); +MODULE_DESCRIPTION("Bosch BMI160 driver"); +MODULE_LICENSE("GPL v2"); |