summaryrefslogtreecommitdiffstats
path: root/drivers/iio/pressure/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/pressure/Kconfig')
-rw-r--r--drivers/iio/pressure/Kconfig282
1 files changed, 282 insertions, 0 deletions
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
new file mode 100644
index 0000000000..7b4c2af328
--- /dev/null
+++ b/drivers/iio/pressure/Kconfig
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Pressure drivers
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Pressure sensors"
+
+config ABP060MG
+ tristate "Honeywell ABP pressure sensor driver"
+ depends on I2C
+ help
+ Say yes here to build support for the Honeywell ABP pressure
+ sensors.
+
+ To compile this driver as a module, choose M here: the module
+ will be called abp060mg.
+
+config BMP280
+ tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver"
+ depends on (I2C || SPI_MASTER)
+ select REGMAP
+ select BMP280_I2C if (I2C)
+ select BMP280_SPI if (SPI_MASTER)
+ help
+ Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380
+ and BMP580 pressure and temperature sensors. Also supports the BME280 with
+ an additional humidity sensor channel.
+
+ To compile this driver as a module, choose M here: the core module
+ will be called bmp280 and you will also get bmp280-i2c for I2C
+ and/or bmp280-spi for SPI support.
+
+config BMP280_I2C
+ tristate
+ depends on BMP280
+ depends on I2C
+ select REGMAP_I2C
+
+config BMP280_SPI
+ tristate
+ depends on BMP280
+ depends on SPI_MASTER
+ select REGMAP
+
+config IIO_CROS_EC_BARO
+ tristate "ChromeOS EC Barometer Sensor"
+ depends on IIO_CROS_EC_SENSORS_CORE
+ help
+ Say yes here to build support for the Barometer sensor when
+ presented by the ChromeOS EC Sensor hub.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cros_ec_baro.
+
+config DLHL60D
+ tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for the All Sensors DLH series
+ pressure sensors driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dlhl60d.
+
+config DPS310
+ tristate "Infineon DPS310 pressure and temperature sensor"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Support for the Infineon DPS310 digital barometric pressure sensor.
+ It can be accessed over I2C bus.
+
+ This driver can also be built as a module. If so, the module will be
+ called dps310.
+
+config HID_SENSOR_PRESS
+ depends on HID_SENSOR_HUB
+ select IIO_BUFFER
+ select HID_SENSOR_IIO_COMMON
+ select HID_SENSOR_IIO_TRIGGER
+ tristate "HID PRESS"
+ help
+ Say yes here to build support for the HID SENSOR
+ Pressure driver
+
+ To compile this driver as a module, choose M here: the module
+ will be called hid-sensor-press.
+
+config HP03
+ tristate "Hope RF HP03 temperature and pressure sensor driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say yes here to build support for Hope RF HP03 pressure and
+ temperature sensor.
+
+ To compile this driver as a module, choose M here: the module
+ will be called hp03.
+
+config ICP10100
+ tristate "InvenSense ICP-101xx pressure and temperature sensor"
+ depends on I2C
+ select CRC8
+ help
+ Say yes here to build support for InvenSense ICP-101xx barometric
+ pressure and temperature sensor.
+
+ To compile this driver as a module, choose M here: the module
+ will be called icp10100.
+
+config MPL115
+ tristate
+
+config MPL115_I2C
+ tristate "Freescale MPL115A2 pressure sensor driver"
+ depends on I2C
+ select MPL115
+ help
+ Say yes here to build support for the Freescale MPL115A2
+ pressure sensor connected via I2C.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mpl115_i2c.
+
+config MPL115_SPI
+ tristate "Freescale MPL115A1 pressure sensor driver"
+ depends on SPI_MASTER
+ select MPL115
+ help
+ Say yes here to build support for the Freescale MPL115A1
+ pressure sensor connected via SPI.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mpl115_spi.
+
+config MPL3115
+ tristate "Freescale MPL3115A2 pressure sensor driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for the Freescale MPL3115A2
+ pressure sensor / altimeter.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mpl3115.
+
+config MPRLS0025PA
+ tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say Y here to build support for the Honeywell MicroPressure pressure
+ sensor series. There are many different types with different pressure
+ range. These ranges can be set up in the device tree.
+
+ To compile this driver as a module, choose M here: the module will be
+ called mprls0025pa.
+
+config MS5611
+ tristate "Measurement Specialties MS5611 pressure sensor driver"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say Y here to build support for the Measurement Specialties
+ MS5611, MS5607 pressure and temperature sensors.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ms5611_core.
+
+config MS5611_I2C
+ tristate "support I2C bus connection"
+ depends on I2C && MS5611
+ help
+ Say Y here to build I2C bus support for MS5611.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ms5611_i2c.
+
+config MS5611_SPI
+ tristate "support SPI bus connection"
+ depends on SPI_MASTER && MS5611
+ help
+ Say Y here to build SPI bus support for MS5611.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ms5611_spi.
+
+config MS5637
+ tristate "Measurement Specialties MS5637 pressure & temperature sensor"
+ depends on I2C
+ select IIO_MS_SENSORS_I2C
+ help
+ If you say yes here you get support for the Measurement Specialties
+ MS5637 pressure and temperature sensor.
+ This driver is also used for MS8607 temperature, pressure & humidity
+ sensor
+
+ This driver can also be built as a module. If so, the module will
+ be called ms5637.
+
+config IIO_ST_PRESS
+ tristate "STMicroelectronics pressure sensor Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select IIO_ST_SENSORS_CORE
+ select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+ help
+ Say yes here to build support for STMicroelectronics pressure
+ sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH.
+
+ Also need to enable at least one of I2C and SPI interface drivers
+ below.
+
+config IIO_ST_PRESS_I2C
+ tristate "STMicroelectronics pressure sensor I2C Interface"
+ depends on I2C && IIO_ST_PRESS
+ default I2C && IIO_ST_PRESS
+ select IIO_ST_SENSORS_I2C
+ help
+ Build support for STMicroelectronics pressure sensor I2C interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_pressure_i2c.
+
+config IIO_ST_PRESS_SPI
+ tristate "STMicroelectronics pressure sensor SPI Interface"
+ depends on SPI_MASTER && IIO_ST_PRESS
+ default SPI_MASTER && IIO_ST_PRESS
+ select IIO_ST_SENSORS_SPI
+ help
+ Build support for STMicroelectronics pressure sensor SPI interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_pressure_spi.
+
+config T5403
+ tristate "EPCOS T5403 digital barometric pressure sensor driver"
+ depends on I2C
+ help
+ Say yes here to build support for the EPCOS T5403 pressure sensor
+ connected via I2C.
+
+ To compile this driver as a module, choose M here: the module
+ will be called t5403.
+
+config HP206C
+ tristate "HOPERF HP206C precision barometer and altimeter sensor"
+ depends on I2C
+ help
+ Say yes here to build support for the HOPREF HP206C precision
+ barometer and altimeter sensor.
+
+ This driver can also be built as a module. If so, the module will
+ be called hp206c.
+
+config ZPA2326
+ tristate "Murata ZPA2326 pressure sensor driver"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select REGMAP
+ select ZPA2326_I2C if I2C
+ select ZPA2326_SPI if SPI_MASTER
+ help
+ Say Y here to build support for the Murata ZPA2326 pressure and
+ temperature sensor.
+
+ To compile this driver as a module, choose M here: the module will
+ be called zpa2326.
+
+config ZPA2326_I2C
+ tristate
+ select REGMAP_I2C
+
+config ZPA2326_SPI
+ tristate
+ select REGMAP_SPI
+
+endmenu