diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz9477_acl.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477_acl.c | 1436 |
1 files changed, 1436 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477_acl.c b/drivers/net/dsa/microchip/ksz9477_acl.c new file mode 100644 index 0000000000..7ba778df63 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz9477_acl.c @@ -0,0 +1,1436 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2023 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> + +/* Access Control List (ACL) structure: + * + * There are multiple groups of registers involved in ACL configuration: + * + * - Matching Rules: These registers define the criteria for matching incoming + * packets based on their header information (Layer 2 MAC, Layer 3 IP, or + * Layer 4 TCP/UDP). Different register settings are used depending on the + * matching rule mode (MD) and the Enable (ENB) settings. + * + * - Action Rules: These registers define how the ACL should modify the packet's + * priority, VLAN tag priority, and forwarding map once a matching rule has + * been triggered. The settings vary depending on whether the matching rule is + * in Count Mode (MD = 01 and ENB = 00) or not. + * + * - Processing Rules: These registers control the overall behavior of the ACL, + * such as selecting which matching rule to apply first, enabling/disabling + * specific rules, or specifying actions for matched packets. + * + * ACL Structure: + * +----------------------+ + * +----------------------+ | (optional) | + * | Matching Rules | | Matching Rules | + * | (Layer 2, 3, 4) | | (Layer 2, 3, 4) | + * +----------------------+ +----------------------+ + * | | + * \___________________________/ + * v + * +----------------------+ + * | Processing Rules | + * | (action idx, | + * | matching rule set) | + * +----------------------+ + * | + * v + * +----------------------+ + * | Action Rules | + * | (Modify Priority, | + * | Forwarding Map, | + * | VLAN tag, etc) | + * +----------------------+ + */ + +#include <linux/bitops.h> + +#include "ksz9477.h" +#include "ksz9477_reg.h" +#include "ksz_common.h" + +#define KSZ9477_PORT_ACL_0 0x600 + +enum ksz9477_acl_port_access { + KSZ9477_ACL_PORT_ACCESS_0 = 0x00, + KSZ9477_ACL_PORT_ACCESS_1 = 0x01, + KSZ9477_ACL_PORT_ACCESS_2 = 0x02, + KSZ9477_ACL_PORT_ACCESS_3 = 0x03, + KSZ9477_ACL_PORT_ACCESS_4 = 0x04, + KSZ9477_ACL_PORT_ACCESS_5 = 0x05, + KSZ9477_ACL_PORT_ACCESS_6 = 0x06, + KSZ9477_ACL_PORT_ACCESS_7 = 0x07, + KSZ9477_ACL_PORT_ACCESS_8 = 0x08, + KSZ9477_ACL_PORT_ACCESS_9 = 0x09, + KSZ9477_ACL_PORT_ACCESS_A = 0x0A, + KSZ9477_ACL_PORT_ACCESS_B = 0x0B, + KSZ9477_ACL_PORT_ACCESS_C = 0x0C, + KSZ9477_ACL_PORT_ACCESS_D = 0x0D, + KSZ9477_ACL_PORT_ACCESS_E = 0x0E, + KSZ9477_ACL_PORT_ACCESS_F = 0x0F, + KSZ9477_ACL_PORT_ACCESS_10 = 0x10, + KSZ9477_ACL_PORT_ACCESS_11 = 0x11 +}; + +#define KSZ9477_ACL_MD_MASK GENMASK(5, 4) +#define KSZ9477_ACL_MD_DISABLE 0 +#define KSZ9477_ACL_MD_L2_MAC 1 +#define KSZ9477_ACL_MD_L3_IP 2 +#define KSZ9477_ACL_MD_L4_TCP_UDP 3 + +#define KSZ9477_ACL_ENB_MASK GENMASK(3, 2) +#define KSZ9477_ACL_ENB_L2_COUNTER 0 +#define KSZ9477_ACL_ENB_L2_TYPE 1 +#define KSZ9477_ACL_ENB_L2_MAC 2 +#define KSZ9477_ACL_ENB_L2_MAC_TYPE 3 + +/* only IPv4 src or dst can be used with mask */ +#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_MASK 1 +/* only IPv4 src and dst can be used without mask */ +#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_SRC_DST 2 + +#define KSZ9477_ACL_ENB_L4_IP_PROTO 0 +#define KSZ9477_ACL_ENB_L4_TCP_SRC_DST_PORT 1 +#define KSZ9477_ACL_ENB_L4_UDP_SRC_DST_PORT 2 +#define KSZ9477_ACL_ENB_L4_TCP_SEQ_NUMBER 3 + +#define KSZ9477_ACL_SD_SRC BIT(1) +#define KSZ9477_ACL_SD_DST 0 +#define KSZ9477_ACL_EQ_EQUAL BIT(0) +#define KSZ9477_ACL_EQ_NOT_EQUAL 0 + +#define KSZ9477_ACL_PM_M GENMASK(7, 6) +#define KSZ9477_ACL_PM_DISABLE 0 +#define KSZ9477_ACL_PM_HIGHER 1 +#define KSZ9477_ACL_PM_LOWER 2 +#define KSZ9477_ACL_PM_REPLACE 3 +#define KSZ9477_ACL_P_M GENMASK(5, 3) + +#define KSZ9477_PORT_ACL_CTRL_0 0x0612 + +#define KSZ9477_ACL_WRITE_DONE BIT(6) +#define KSZ9477_ACL_READ_DONE BIT(5) +#define KSZ9477_ACL_WRITE BIT(4) +#define KSZ9477_ACL_INDEX_M GENMASK(3, 0) + +/** + * ksz9477_dump_acl_index - Print the ACL entry at the specified index + * + * @dev: Pointer to the ksz9477 device structure. + * @acle: Pointer to the ACL entry array. + * @index: The index of the ACL entry to print. + * + * This function prints the details of an ACL entry, located at a particular + * index within the ksz9477 device's ACL table. It omits printing entries that + * are empty. + * + * Return: 1 if the entry is non-empty and printed, 0 otherwise. + */ +static int ksz9477_dump_acl_index(struct ksz_device *dev, + struct ksz9477_acl_entry *acle, int index) +{ + bool empty = true; + char buf[64]; + u8 *entry; + int i; + + entry = &acle[index].entry[0]; + for (i = 0; i <= KSZ9477_ACL_PORT_ACCESS_11; i++) { + if (entry[i]) + empty = false; + + sprintf(buf + (i * 3), "%02x ", entry[i]); + } + + /* no need to print empty entries */ + if (empty) + return 0; + + dev_err(dev->dev, " Entry %02d, prio: %02d : %s", index, + acle[index].prio, buf); + + return 1; +} + +/** + * ksz9477_dump_acl - Print ACL entries + * + * @dev: Pointer to the device structure. + * @acle: Pointer to the ACL entry array. + */ +static void ksz9477_dump_acl(struct ksz_device *dev, + struct ksz9477_acl_entry *acle) +{ + int count = 0; + int i; + + for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES; i++) + count += ksz9477_dump_acl_index(dev, acle, i); + + if (count != KSZ9477_ACL_MAX_ENTRIES - 1) + dev_err(dev->dev, " Empty ACL entries were skipped\n"); +} + +/** + * ksz9477_acl_is_valid_matching_rule - Check if an ACL entry contains a valid + * matching rule. + * + * @entry: Pointer to ACL entry buffer + * + * This function checks if the given ACL entry buffer contains a valid + * matching rule by inspecting the Mode (MD) and Enable (ENB) fields. + * + * Returns: True if it's a valid matching rule, false otherwise. + */ +static bool ksz9477_acl_is_valid_matching_rule(u8 *entry) +{ + u8 val1, md, enb; + + val1 = entry[KSZ9477_ACL_PORT_ACCESS_1]; + + md = FIELD_GET(KSZ9477_ACL_MD_MASK, val1); + if (md == KSZ9477_ACL_MD_DISABLE) + return false; + + if (md == KSZ9477_ACL_MD_L2_MAC) { + /* L2 counter is not support, so it is not valid rule for now */ + enb = FIELD_GET(KSZ9477_ACL_ENB_MASK, val1); + if (enb == KSZ9477_ACL_ENB_L2_COUNTER) + return false; + } + + return true; +} + +/** + * ksz9477_acl_get_cont_entr - Get count of contiguous ACL entries and validate + * the matching rules. + * @dev: Pointer to the KSZ9477 device structure. + * @port: Port number. + * @index: Index of the starting ACL entry. + * + * Based on the KSZ9477 switch's Access Control List (ACL) system, the RuleSet + * in an ACL entry indicates which entries contain Matching rules linked to it. + * This RuleSet is represented by two registers: KSZ9477_ACL_PORT_ACCESS_E and + * KSZ9477_ACL_PORT_ACCESS_F. Each bit set in these registers corresponds to + * an entry containing a Matching rule for this RuleSet. + * + * For a single Matching rule linked, only one bit is set. However, when an + * entry links multiple Matching rules, forming what's termed a 'complex rule', + * multiple bits are set in these registers. + * + * This function checks that, for complex rules, the entries containing the + * linked Matching rules are contiguous in terms of their indices. It calculates + * and returns the number of these contiguous entries. + * + * Returns: + * - 0 if the entry is empty and can be safely overwritten + * - 1 if the entry represents a simple rule + * - The number of contiguous entries if it is the root entry of a complex + * rule + * - -ENOTEMPTY if the entry is part of a complex rule but not the root + * entry + * - -EINVAL if the validation fails + */ +static int ksz9477_acl_get_cont_entr(struct ksz_device *dev, int port, + int index) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + int start_idx, end_idx, contiguous_count; + unsigned long val; + u8 vale, valf; + u8 *entry; + int i; + + entry = &acles->entries[index].entry[0]; + vale = entry[KSZ9477_ACL_PORT_ACCESS_E]; + valf = entry[KSZ9477_ACL_PORT_ACCESS_F]; + + val = (vale << 8) | valf; + + /* If no bits are set, return an appropriate value or error */ + if (!val) { + if (ksz9477_acl_is_valid_matching_rule(entry)) { + /* Looks like we are about to corrupt some complex rule. + * Do not print an error here, as this is a normal case + * when we are trying to find a free or starting entry. + */ + dev_dbg(dev->dev, "ACL: entry %d starting with a valid matching rule, but no bits set in RuleSet\n", + index); + return -ENOTEMPTY; + } + + /* This entry does not contain a valid matching rule */ + return 0; + } + + start_idx = find_first_bit((unsigned long *)&val, 16); + end_idx = find_last_bit((unsigned long *)&val, 16); + + /* Calculate the contiguous count */ + contiguous_count = end_idx - start_idx + 1; + + /* Check if the number of bits set in val matches our calculated count */ + if (contiguous_count != hweight16(val)) { + /* Probably we have a fragmented complex rule, which is not + * supported by this driver. + */ + dev_err(dev->dev, "ACL: number of bits set in RuleSet does not match calculated count\n"); + return -EINVAL; + } + + /* loop over the contiguous entries and check for valid matching rules */ + for (i = start_idx; i <= end_idx; i++) { + u8 *current_entry = &acles->entries[i].entry[0]; + + if (!ksz9477_acl_is_valid_matching_rule(current_entry)) { + /* we have something linked without a valid matching + * rule. ACL table? + */ + dev_err(dev->dev, "ACL: entry %d does not contain a valid matching rule\n", + i); + return -EINVAL; + } + + if (i > start_idx) { + vale = current_entry[KSZ9477_ACL_PORT_ACCESS_E]; + valf = current_entry[KSZ9477_ACL_PORT_ACCESS_F]; + /* Following entry should have empty linkage list */ + if (vale || valf) { + dev_err(dev->dev, "ACL: entry %d has non-empty RuleSet linkage\n", + i); + return -EINVAL; + } + } + } + + return contiguous_count; +} + +/** + * ksz9477_acl_update_linkage - Update the RuleSet linkage for an ACL entry + * after a move operation. + * + * @dev: Pointer to the ksz_device. + * @entry: Pointer to the ACL entry array. + * @old_idx: The original index of the ACL entry before moving. + * @new_idx: The new index of the ACL entry after moving. + * + * This function updates the RuleSet linkage bits for an ACL entry when + * it's moved from one position to another in the ACL table. The RuleSet + * linkage is represented by two 8-bit registers, which are combined + * into a 16-bit value for easier manipulation. The linkage bits are shifted + * based on the difference between the old and new index. If any bits are lost + * during the shift operation, an error is returned. + * + * Note: Fragmentation within a RuleSet is not supported. Hence, entries must + * be moved as complete blocks, maintaining the integrity of the RuleSet. + * + * Returns: 0 on success, or -EINVAL if any RuleSet linkage bits are lost + * during the move. + */ +static int ksz9477_acl_update_linkage(struct ksz_device *dev, u8 *entry, + u16 old_idx, u16 new_idx) +{ + unsigned int original_bit_count; + unsigned long rule_linkage; + u8 vale, valf, val0; + int shift; + + val0 = entry[KSZ9477_ACL_PORT_ACCESS_0]; + vale = entry[KSZ9477_ACL_PORT_ACCESS_E]; + valf = entry[KSZ9477_ACL_PORT_ACCESS_F]; + + /* Combine the two u8 values into one u16 for easier manipulation */ + rule_linkage = (vale << 8) | valf; + original_bit_count = hweight16(rule_linkage); + + /* Even if HW is able to handle fragmented RuleSet, we don't support it. + * RuleSet is filled only for the first entry of the set. + */ + if (!rule_linkage) + return 0; + + if (val0 != old_idx) { + dev_err(dev->dev, "ACL: entry %d has unexpected ActionRule linkage: %d\n", + old_idx, val0); + return -EINVAL; + } + + val0 = new_idx; + + /* Calculate the number of positions to shift */ + shift = new_idx - old_idx; + + /* Shift the RuleSet */ + if (shift > 0) + rule_linkage <<= shift; + else + rule_linkage >>= -shift; + + /* Check that no bits were lost in the process */ + if (original_bit_count != hweight16(rule_linkage)) { + dev_err(dev->dev, "ACL RuleSet linkage bits lost during move\n"); + return -EINVAL; + } + + entry[KSZ9477_ACL_PORT_ACCESS_0] = val0; + + /* Update the RuleSet bitfields in the entry */ + entry[KSZ9477_ACL_PORT_ACCESS_E] = (rule_linkage >> 8) & 0xFF; + entry[KSZ9477_ACL_PORT_ACCESS_F] = rule_linkage & 0xFF; + + return 0; +} + +/** + * ksz9477_validate_and_get_src_count - Validate source and destination indices + * and determine the source entry count. + * @dev: Pointer to the KSZ device structure. + * @port: Port number on the KSZ device where the ACL entries reside. + * @src_idx: Index of the starting ACL entry that needs to be validated. + * @dst_idx: Index of the destination where the source entries are intended to + * be moved. + * @src_count: Pointer to the variable that will hold the number of contiguous + * source entries if the validation passes. + * @dst_count: Pointer to the variable that will hold the number of contiguous + * destination entries if the validation passes. + * + * This function performs validation on the source and destination indices + * provided for ACL entries. It checks if the indices are within the valid + * range, and if the source entries are contiguous. Additionally, the function + * ensures that there's adequate space at the destination for the source entries + * and that the destination index isn't in the middle of a RuleSet. If all + * validations pass, the function returns the number of contiguous source and + * destination entries. + * + * Return: 0 on success, otherwise returns a negative error code if any + * validation check fails. + */ +static int ksz9477_validate_and_get_src_count(struct ksz_device *dev, int port, + int src_idx, int dst_idx, + int *src_count, int *dst_count) +{ + int ret; + + if (src_idx >= KSZ9477_ACL_MAX_ENTRIES || + dst_idx >= KSZ9477_ACL_MAX_ENTRIES) { + dev_err(dev->dev, "ACL: invalid entry index\n"); + return -EINVAL; + } + + /* Validate if the source entries are contiguous */ + ret = ksz9477_acl_get_cont_entr(dev, port, src_idx); + if (ret < 0) + return ret; + *src_count = ret; + + if (!*src_count) { + dev_err(dev->dev, "ACL: source entry is empty\n"); + return -EINVAL; + } + + if (dst_idx + *src_count >= KSZ9477_ACL_MAX_ENTRIES) { + dev_err(dev->dev, "ACL: Not enough space at the destination. Move operation will fail.\n"); + return -EINVAL; + } + + /* Validate if the destination entry is empty or not in the middle of + * a RuleSet. + */ + ret = ksz9477_acl_get_cont_entr(dev, port, dst_idx); + if (ret < 0) + return ret; + *dst_count = ret; + + return 0; +} + +/** + * ksz9477_move_entries_downwards - Move a range of ACL entries downwards in + * the list. + * @dev: Pointer to the KSZ device structure. + * @acles: Pointer to the structure encapsulating all the ACL entries. + * @start_idx: Starting index of the entries to be relocated. + * @num_entries_to_move: Number of consecutive entries to be relocated. + * @end_idx: Destination index where the first entry should be situated post + * relocation. + * + * This function is responsible for rearranging a specific block of ACL entries + * by shifting them downwards in the list based on the supplied source and + * destination indices. It ensures that the linkage between the ACL entries is + * maintained accurately after the relocation. + * + * Return: 0 on successful relocation of entries, otherwise returns a negative + * error code. + */ +static int ksz9477_move_entries_downwards(struct ksz_device *dev, + struct ksz9477_acl_entries *acles, + u16 start_idx, + u16 num_entries_to_move, + u16 end_idx) +{ + struct ksz9477_acl_entry *e; + int ret, i; + + for (i = start_idx; i < end_idx; i++) { + e = &acles->entries[i]; + *e = acles->entries[i + num_entries_to_move]; + + ret = ksz9477_acl_update_linkage(dev, &e->entry[0], + i + num_entries_to_move, i); + if (ret < 0) + return ret; + } + + return 0; +} + +/** + * ksz9477_move_entries_upwards - Move a range of ACL entries upwards in the + * list. + * @dev: Pointer to the KSZ device structure. + * @acles: Pointer to the structure holding all the ACL entries. + * @start_idx: The starting index of the entries to be moved. + * @num_entries_to_move: Number of contiguous entries to be moved. + * @target_idx: The destination index where the first entry should be placed + * after moving. + * + * This function rearranges a chunk of ACL entries by moving them upwards + * in the list based on the given source and destination indices. The reordering + * process preserves the linkage between entries by updating it accordingly. + * + * Return: 0 if the entries were successfully moved, otherwise a negative error + * code. + */ +static int ksz9477_move_entries_upwards(struct ksz_device *dev, + struct ksz9477_acl_entries *acles, + u16 start_idx, u16 num_entries_to_move, + u16 target_idx) +{ + struct ksz9477_acl_entry *e; + int ret, i, b; + + for (i = start_idx; i > target_idx; i--) { + b = i + num_entries_to_move - 1; + + e = &acles->entries[b]; + *e = acles->entries[i - 1]; + + ret = ksz9477_acl_update_linkage(dev, &e->entry[0], i - 1, b); + if (ret < 0) + return ret; + } + + return 0; +} + +/** + * ksz9477_acl_move_entries - Move a block of contiguous ACL entries from a + * source to a destination index. + * @dev: Pointer to the KSZ9477 device structure. + * @port: Port number. + * @src_idx: Index of the starting source ACL entry. + * @dst_idx: Index of the starting destination ACL entry. + * + * This function aims to move a block of contiguous ACL entries from the source + * index to the destination index while ensuring the integrity and validity of + * the ACL table. + * + * In case of any errors during the adjustments or copying, the function will + * restore the ACL entries to their original state from the backup. + * + * Return: 0 if the move operation is successful. Returns -EINVAL for validation + * errors or other error codes based on specific failure conditions. + */ +static int ksz9477_acl_move_entries(struct ksz_device *dev, int port, + u16 src_idx, u16 dst_idx) +{ + struct ksz9477_acl_entry buffer[KSZ9477_ACL_MAX_ENTRIES]; + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + int src_count, ret, dst_count; + + /* Nothing to do */ + if (src_idx == dst_idx) + return 0; + + ret = ksz9477_validate_and_get_src_count(dev, port, src_idx, dst_idx, + &src_count, &dst_count); + if (ret) + return ret; + + /* In case dst_index is greater than src_index, we need to adjust the + * destination index to account for the entries that will be moved + * downwards and the size of the entry located at dst_idx. + */ + if (dst_idx > src_idx) + dst_idx = dst_idx + dst_count - src_count; + + /* Copy source block to buffer and update its linkage */ + for (int i = 0; i < src_count; i++) { + buffer[i] = acles->entries[src_idx + i]; + ret = ksz9477_acl_update_linkage(dev, &buffer[i].entry[0], + src_idx + i, dst_idx + i); + if (ret < 0) + return ret; + } + + /* Adjust other entries and their linkage based on destination */ + if (dst_idx > src_idx) { + ret = ksz9477_move_entries_downwards(dev, acles, src_idx, + src_count, dst_idx); + } else { + ret = ksz9477_move_entries_upwards(dev, acles, src_idx, + src_count, dst_idx); + } + if (ret < 0) + return ret; + + /* Copy buffer to destination block */ + for (int i = 0; i < src_count; i++) + acles->entries[dst_idx + i] = buffer[i]; + + return 0; +} + +/** + * ksz9477_get_next_block_start - Identify the starting index of the next ACL + * block. + * @dev: Pointer to the device structure. + * @port: The port number on which the ACL entries are being checked. + * @start: The starting index from which the search begins. + * + * This function looks for the next valid ACL block starting from the provided + * 'start' index and returns the beginning index of that block. If the block is + * invalid or if it reaches the end of the ACL entries without finding another + * block, it returns the maximum ACL entries count. + * + * Returns: + * - The starting index of the next valid ACL block. + * - KSZ9477_ACL_MAX_ENTRIES if no other valid blocks are found after 'start'. + * - A negative error code if an error occurs while checking. + */ +static int ksz9477_get_next_block_start(struct ksz_device *dev, int port, + int start) +{ + int block_size; + + for (int i = start; i < KSZ9477_ACL_MAX_ENTRIES;) { + block_size = ksz9477_acl_get_cont_entr(dev, port, i); + if (block_size < 0 && block_size != -ENOTEMPTY) + return block_size; + + if (block_size > 0) + return i; + + i++; + } + return KSZ9477_ACL_MAX_ENTRIES; +} + +/** + * ksz9477_swap_acl_blocks - Swap two ACL blocks + * @dev: Pointer to the device structure. + * @port: The port number on which the ACL blocks are to be swapped. + * @i: The starting index of the first ACL block. + * @j: The starting index of the second ACL block. + * + * This function is used to swap two ACL blocks present at given indices. The + * main purpose is to aid in the sorting and reordering of ACL blocks based on + * certain criteria, e.g., priority. It checks the validity of the block at + * index 'i', ensuring it's not an empty block, and then proceeds to swap it + * with the block at index 'j'. + * + * Returns: + * - 0 on successful swapping of blocks. + * - -EINVAL if the block at index 'i' is empty. + * - A negative error code if any other error occurs during the swap. + */ +static int ksz9477_swap_acl_blocks(struct ksz_device *dev, int port, int i, + int j) +{ + int ret, current_block_size; + + current_block_size = ksz9477_acl_get_cont_entr(dev, port, i); + if (current_block_size < 0) + return current_block_size; + + if (!current_block_size) { + dev_err(dev->dev, "ACL: swapping empty entry %d\n", i); + return -EINVAL; + } + + ret = ksz9477_acl_move_entries(dev, port, i, j); + if (ret) + return ret; + + ret = ksz9477_acl_move_entries(dev, port, j - current_block_size, i); + if (ret) + return ret; + + return 0; +} + +/** + * ksz9477_sort_acl_entr_no_back - Sort ACL entries for a given port based on + * priority without backing up entries. + * @dev: Pointer to the device structure. + * @port: The port number whose ACL entries need to be sorted. + * + * This function sorts ACL entries of the specified port using a variant of the + * bubble sort algorithm. It operates on blocks of ACL entries rather than + * individual entries. Each block's starting point is identified and then + * compared with subsequent blocks based on their priority. If the current + * block has a lower priority than the subsequent block, the two blocks are + * swapped. + * + * This is done in order to maintain an organized order of ACL entries based on + * priority, ensuring efficient and predictable ACL rule application. + * + * Returns: + * - 0 on successful sorting of entries. + * - A negative error code if any issue arises during sorting, e.g., + * if the function is unable to get the next block start. + */ +static int ksz9477_sort_acl_entr_no_back(struct ksz_device *dev, int port) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + struct ksz9477_acl_entry *curr, *next; + int i, j, ret; + + /* Bubble sort */ + for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES;) { + curr = &acles->entries[i]; + + j = ksz9477_get_next_block_start(dev, port, i + 1); + if (j < 0) + return j; + + while (j < KSZ9477_ACL_MAX_ENTRIES) { + next = &acles->entries[j]; + + if (curr->prio > next->prio) { + ret = ksz9477_swap_acl_blocks(dev, port, i, j); + if (ret) + return ret; + } + + j = ksz9477_get_next_block_start(dev, port, j + 1); + if (j < 0) + return j; + } + + i = ksz9477_get_next_block_start(dev, port, i + 1); + if (i < 0) + return i; + } + + return 0; +} + +/** + * ksz9477_sort_acl_entries - Sort the ACL entries for a given port. + * @dev: Pointer to the KSZ device. + * @port: Port number. + * + * This function sorts the Access Control List (ACL) entries for a specified + * port. Before sorting, a backup of the original entries is created. If the + * sorting process fails, the function will log error messages displaying both + * the original and attempted sorted entries, and then restore the original + * entries from the backup. + * + * Return: 0 if the sorting succeeds, otherwise a negative error code. + */ +int ksz9477_sort_acl_entries(struct ksz_device *dev, int port) +{ + struct ksz9477_acl_entry backup[KSZ9477_ACL_MAX_ENTRIES]; + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + int ret; + + /* create a backup of the ACL entries, if something goes wrong + * we can restore the ACL entries. + */ + memcpy(backup, acles->entries, sizeof(backup)); + + ret = ksz9477_sort_acl_entr_no_back(dev, port); + if (ret) { + dev_err(dev->dev, "ACL: failed to sort entries for port %d\n", + port); + dev_err(dev->dev, "ACL dump before sorting:\n"); + ksz9477_dump_acl(dev, backup); + dev_err(dev->dev, "ACL dump after sorting:\n"); + ksz9477_dump_acl(dev, acles->entries); + /* Restore the original entries */ + memcpy(acles->entries, backup, sizeof(backup)); + } + + return ret; +} + +/** + * ksz9477_acl_wait_ready - Waits for the ACL operation to complete on a given + * port. + * @dev: The ksz_device instance. + * @port: The port number to wait for. + * + * This function checks if the ACL write or read operation is completed by + * polling the specified register. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +static int ksz9477_acl_wait_ready(struct ksz_device *dev, int port) +{ + unsigned int wr_mask = KSZ9477_ACL_WRITE_DONE | KSZ9477_ACL_READ_DONE; + unsigned int val, reg; + int ret; + + reg = dev->dev_ops->get_port_addr(port, KSZ9477_PORT_ACL_CTRL_0); + + ret = regmap_read_poll_timeout(dev->regmap[0], reg, val, + (val & wr_mask) == wr_mask, 1000, 10000); + if (ret) + dev_err(dev->dev, "Failed to read/write ACL table\n"); + + return ret; +} + +/** + * ksz9477_acl_entry_write - Writes an ACL entry to a given port at the + * specified index. + * @dev: The ksz_device instance. + * @port: The port number to write the ACL entry to. + * @entry: A pointer to the ACL entry data. + * @idx: The index at which to write the ACL entry. + * + * This function writes the provided ACL entry to the specified port at the + * given index. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +static int ksz9477_acl_entry_write(struct ksz_device *dev, int port, u8 *entry, + int idx) +{ + int ret, i; + u8 val; + + for (i = 0; i < KSZ9477_ACL_ENTRY_SIZE; i++) { + ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_0 + i, entry[i]); + if (ret) { + dev_err(dev->dev, "Failed to write ACL entry %d\n", i); + return ret; + } + } + + /* write everything down */ + val = FIELD_PREP(KSZ9477_ACL_INDEX_M, idx) | KSZ9477_ACL_WRITE; + ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_CTRL_0, val); + if (ret) + return ret; + + /* wait until everything is written */ + return ksz9477_acl_wait_ready(dev, port); +} + +/** + * ksz9477_acl_port_enable - Enables ACL functionality on a given port. + * @dev: The ksz_device instance. + * @port: The port number on which to enable ACL functionality. + * + * This function enables ACL functionality on the specified port by configuring + * the appropriate control registers. It returns 0 if the operation is + * successful, or a negative error code if an error occurs. + * + * 0xn801 - KSZ9477S 5.2.8.2 Port Priority Control Register + * Bit 7 - Highest Priority + * Bit 6 - OR'ed Priority + * Bit 4 - MAC Address Priority Classification + * Bit 3 - VLAN Priority Classification + * Bit 2 - 802.1p Priority Classification + * Bit 1 - Diffserv Priority Classification + * Bit 0 - ACL Priority Classification + * + * Current driver implementation sets 802.1p priority classification by default. + * In this function we add ACL priority classification with OR'ed priority. + * According to testing, priority set by ACL will supersede the 802.1p priority. + * + * 0xn803 - KSZ9477S 5.2.8.4 Port Authentication Control Register + * Bit 2 - Access Control List (ACL) Enable + * Bits 1:0 - Authentication Mode + * 00 = Reserved + * 01 = Block Mode. Authentication is enabled. When ACL is + * enabled, all traffic that misses the ACL rules is + * blocked; otherwise ACL actions apply. + * 10 = Pass Mode. Authentication is disabled. When ACL is + * enabled, all traffic that misses the ACL rules is + * forwarded; otherwise ACL actions apply. + * 11 = Trap Mode. Authentication is enabled. All traffic is + * forwarded to the host port. When ACL is enabled, all + * traffic that misses the ACL rules is blocked; otherwise + * ACL actions apply. + * + * We are using Pass Mode int this function. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +static int ksz9477_acl_port_enable(struct ksz_device *dev, int port) +{ + int ret; + + ret = ksz_prmw8(dev, port, P_PRIO_CTRL, 0, PORT_ACL_PRIO_ENABLE | + PORT_OR_PRIO); + if (ret) + return ret; + + return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL, + PORT_ACL_ENABLE | + FIELD_PREP(PORT_AUTHEN_MODE, PORT_AUTHEN_PASS)); +} + +/** + * ksz9477_acl_port_disable - Disables ACL functionality on a given port. + * @dev: The ksz_device instance. + * @port: The port number on which to disable ACL functionality. + * + * This function disables ACL functionality on the specified port by writing a + * value of 0 to the REG_PORT_MRI_AUTHEN_CTRL control register and remove + * PORT_ACL_PRIO_ENABLE bit from P_PRIO_CTRL register. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +static int ksz9477_acl_port_disable(struct ksz_device *dev, int port) +{ + int ret; + + ret = ksz_prmw8(dev, port, P_PRIO_CTRL, PORT_ACL_PRIO_ENABLE, 0); + if (ret) + return ret; + + return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL, 0); +} + +/** + * ksz9477_acl_write_list - Write a list of ACL entries to a given port. + * @dev: The ksz_device instance. + * @port: The port number on which to write ACL entries. + * + * This function enables ACL functionality on the specified port, writes a list + * of ACL entries to the port, and disables ACL functionality if there are no + * entries. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +int ksz9477_acl_write_list(struct ksz_device *dev, int port) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + int ret, i; + + /* ACL should be enabled before writing entries */ + ret = ksz9477_acl_port_enable(dev, port); + if (ret) + return ret; + + /* write all entries */ + for (i = 0; i < ARRAY_SIZE(acles->entries); i++) { + u8 *entry = acles->entries[i].entry; + + /* Check if entry was removed and should be zeroed. + * If last fields of the entry are not zero, it means + * it is removed locally but currently not synced with the HW. + * So, we will write it down to the HW to remove it. + */ + if (i >= acles->entries_count && + entry[KSZ9477_ACL_PORT_ACCESS_10] == 0 && + entry[KSZ9477_ACL_PORT_ACCESS_11] == 0) + continue; + + ret = ksz9477_acl_entry_write(dev, port, entry, i); + if (ret) + return ret; + + /* now removed entry is clean on HW side, so it can + * in the cache too + */ + if (i >= acles->entries_count && + entry[KSZ9477_ACL_PORT_ACCESS_10] != 0 && + entry[KSZ9477_ACL_PORT_ACCESS_11] != 0) { + entry[KSZ9477_ACL_PORT_ACCESS_10] = 0; + entry[KSZ9477_ACL_PORT_ACCESS_11] = 0; + } + } + + if (!acles->entries_count) + return ksz9477_acl_port_disable(dev, port); + + return 0; +} + +/** + * ksz9477_acl_remove_entries - Remove ACL entries with a given cookie from a + * specified ksz9477_acl_entries structure. + * @dev: The ksz_device instance. + * @port: The port number on which to remove ACL entries. + * @acles: The ksz9477_acl_entries instance. + * @cookie: The cookie value to match for entry removal. + * + * This function iterates through the entries array, removing any entries with + * a matching cookie value. The remaining entries are then shifted down to fill + * the gap. + */ +void ksz9477_acl_remove_entries(struct ksz_device *dev, int port, + struct ksz9477_acl_entries *acles, + unsigned long cookie) +{ + int entries_count = acles->entries_count; + int ret, i, src_count; + int src_idx = -1; + + if (!entries_count) + return; + + /* Search for the first position with the cookie */ + for (i = 0; i < entries_count; i++) { + if (acles->entries[i].cookie == cookie) { + src_idx = i; + break; + } + } + + /* No entries with the matching cookie found */ + if (src_idx == -1) + return; + + /* Get the size of the cookie entry. We may have complex entries. */ + src_count = ksz9477_acl_get_cont_entr(dev, port, src_idx); + if (src_count <= 0) + return; + + /* Move all entries down to overwrite removed entry with the cookie */ + ret = ksz9477_move_entries_downwards(dev, acles, src_idx, + src_count, + entries_count - src_count); + if (ret) { + dev_err(dev->dev, "Failed to move ACL entries down\n"); + return; + } + + /* Overwrite new empty places at the end of the list with zeros to make + * sure not unexpected things will happen or no unexplored quirks will + * come out. + */ + for (i = entries_count - src_count; i < entries_count; i++) { + struct ksz9477_acl_entry *entry = &acles->entries[i]; + + memset(entry, 0, sizeof(*entry)); + + /* Set all access bits to be able to write zeroed entry to HW */ + entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff; + entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff; + } + + /* Adjust the total entries count */ + acles->entries_count -= src_count; +} + +/** + * ksz9477_port_acl_init - Initialize the ACL for a specified port on a ksz + * device. + * @dev: The ksz_device instance. + * @port: The port number to initialize the ACL for. + * + * This function allocates memory for an acl structure, associates it with the + * specified port, and initializes the ACL entries to a default state. The + * entries are then written using the ksz9477_acl_write_list function, ensuring + * the ACL has a predictable initial hardware state. + * + * Returns: 0 on success, or an error code on failure. + */ +int ksz9477_port_acl_init(struct ksz_device *dev, int port) +{ + struct ksz9477_acl_entries *acles; + struct ksz9477_acl_priv *acl; + int ret, i; + + acl = kzalloc(sizeof(*acl), GFP_KERNEL); + if (!acl) + return -ENOMEM; + + dev->ports[port].acl_priv = acl; + + acles = &acl->acles; + /* write all entries */ + for (i = 0; i < ARRAY_SIZE(acles->entries); i++) { + u8 *entry = acles->entries[i].entry; + + /* Set all access bits to be able to write zeroed + * entry + */ + entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff; + entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff; + } + + ret = ksz9477_acl_write_list(dev, port); + if (ret) + goto free_acl; + + return 0; + +free_acl: + kfree(dev->ports[port].acl_priv); + dev->ports[port].acl_priv = NULL; + + return ret; +} + +/** + * ksz9477_port_acl_free - Free the ACL resources for a specified port on a ksz + * device. + * @dev: The ksz_device instance. + * @port: The port number to initialize the ACL for. + * + * This disables the ACL for the specified port and frees the associated memory, + */ +void ksz9477_port_acl_free(struct ksz_device *dev, int port) +{ + if (!dev->ports[port].acl_priv) + return; + + ksz9477_acl_port_disable(dev, port); + + kfree(dev->ports[port].acl_priv); + dev->ports[port].acl_priv = NULL; +} + +/** + * ksz9477_acl_set_reg - Set entry[16] and entry[17] depending on the updated + * entry[] + * @entry: An array containing the entries + * @reg: The register of the entry that needs to be updated + * @value: The value to be assigned to the updated entry + * + * This function updates the entry[] array based on the provided register and + * value. It also sets entry[0x10] and entry[0x11] according to the ACL byte + * enable rules. + * + * 0x10 - Byte Enable [15:8] + * + * Each bit enables accessing one of the ACL bytes when a read or write is + * initiated by writing to the Port ACL Byte Enable LSB Register. + * Bit 0 applies to the Port ACL Access 7 Register + * Bit 1 applies to the Port ACL Access 6 Register, etc. + * Bit 7 applies to the Port ACL Access 0 Register + * 1 = Byte is selected for read/write + * 0 = Byte is not selected + * + * 0x11 - Byte Enable [7:0] + * + * Each bit enables accessing one of the ACL bytes when a read or write is + * initiated by writing to the Port ACL Byte Enable LSB Register. + * Bit 0 applies to the Port ACL Access F Register + * Bit 1 applies to the Port ACL Access E Register, etc. + * Bit 7 applies to the Port ACL Access 8 Register + * 1 = Byte is selected for read/write + * 0 = Byte is not selected + */ +static void ksz9477_acl_set_reg(u8 *entry, enum ksz9477_acl_port_access reg, + u8 value) +{ + if (reg >= KSZ9477_ACL_PORT_ACCESS_0 && + reg <= KSZ9477_ACL_PORT_ACCESS_7) { + entry[KSZ9477_ACL_PORT_ACCESS_10] |= + BIT(KSZ9477_ACL_PORT_ACCESS_7 - reg); + } else if (reg >= KSZ9477_ACL_PORT_ACCESS_8 && + reg <= KSZ9477_ACL_PORT_ACCESS_F) { + entry[KSZ9477_ACL_PORT_ACCESS_11] |= + BIT(KSZ9477_ACL_PORT_ACCESS_F - reg); + } else { + WARN_ON(1); + return; + } + + entry[reg] = value; +} + +/** + * ksz9477_acl_matching_rule_cfg_l2 - Configure an ACL filtering entry to match + * L2 types of Ethernet frames + * @entry: Pointer to ACL entry buffer + * @ethertype: Ethertype value + * @eth_addr: Pointer to Ethernet address + * @is_src: If true, match the source MAC address; if false, match the + * destination MAC address + * + * This function configures an Access Control List (ACL) filtering + * entry to match Layer 2 types of Ethernet frames based on the provided + * ethertype and Ethernet address. Additionally, it can match either the source + * or destination MAC address depending on the value of the is_src parameter. + * + * Register Descriptions for MD = 01 and ENB != 00 (Layer 2 MAC header + * filtering) + * + * 0x01 - Mode and Enable + * Bits 5:4 - MD (Mode) + * 01 = Layer 2 MAC header or counter filtering + * Bits 3:2 - ENB (Enable) + * 01 = Comparison is performed only on the TYPE value + * 10 = Comparison is performed only on the MAC Address value + * 11 = Both the MAC Address and TYPE are tested + * Bit 1 - S/D (Source / Destination) + * 0 = Destination address + * 1 = Source address + * Bit 0 - EQ (Equal / Not Equal) + * 0 = Not Equal produces true result + * 1 = Equal produces true result + * + * 0x02-0x07 - MAC Address + * 0x02 - MAC Address [47:40] + * 0x03 - MAC Address [39:32] + * 0x04 - MAC Address [31:24] + * 0x05 - MAC Address [23:16] + * 0x06 - MAC Address [15:8] + * 0x07 - MAC Address [7:0] + * + * 0x08-0x09 - EtherType + * 0x08 - EtherType [15:8] + * 0x09 - EtherType [7:0] + */ +static void ksz9477_acl_matching_rule_cfg_l2(u8 *entry, u16 ethertype, + u8 *eth_addr, bool is_src) +{ + u8 enb = 0; + u8 val; + + if (ethertype) + enb |= KSZ9477_ACL_ENB_L2_TYPE; + if (eth_addr) + enb |= KSZ9477_ACL_ENB_L2_MAC; + + val = FIELD_PREP(KSZ9477_ACL_MD_MASK, KSZ9477_ACL_MD_L2_MAC) | + FIELD_PREP(KSZ9477_ACL_ENB_MASK, enb) | + FIELD_PREP(KSZ9477_ACL_SD_SRC, is_src) | KSZ9477_ACL_EQ_EQUAL; + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_1, val); + + if (eth_addr) { + int i; + + for (i = 0; i < ETH_ALEN; i++) { + ksz9477_acl_set_reg(entry, + KSZ9477_ACL_PORT_ACCESS_2 + i, + eth_addr[i]); + } + } + + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_8, ethertype >> 8); + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_9, ethertype & 0xff); +} + +/** + * ksz9477_acl_action_rule_cfg - Set action for an ACL entry + * @entry: Pointer to the ACL entry + * @force_prio: If true, force the priority value + * @prio_val: Priority value + * + * This function sets the action for the specified ACL entry. It prepares + * the priority mode and traffic class values and updates the entry's + * action registers accordingly. Currently, there is no port or VLAN PCP + * remapping. + * + * ACL Action Rule Parameters for Non-Count Modes (MD ≠ 01 or ENB ≠ 00) + * + * 0x0A - PM, P, RPE, RP[2:1] + * Bits 7:6 - PM[1:0] - Priority Mode + * 00 = ACL does not specify the packet priority. Priority is + * determined by standard QoS functions. + * 01 = Change packet priority to P[2:0] if it is greater than QoS + * result. + * 10 = Change packet priority to P[2:0] if it is smaller than the + * QoS result. + * 11 = Always change packet priority to P[2:0]. + * Bits 5:3 - P[2:0] - Priority value + * Bit 2 - RPE - Remark Priority Enable + * Bits 1:0 - RP[2:1] - Remarked Priority value (bits 2:1) + * 0 = Disable priority remarking + * 1 = Enable priority remarking. VLAN tag priority (PCP) bits are + * replaced by RP[2:0]. + * + * 0x0B - RP[0], MM + * Bit 7 - RP[0] - Remarked Priority value (bit 0) + * Bits 6:5 - MM[1:0] - Map Mode + * 00 = No forwarding remapping + * 01 = The forwarding map in FORWARD is OR'ed with the forwarding + * map from the Address Lookup Table. + * 10 = The forwarding map in FORWARD is AND'ed with the forwarding + * map from the Address Lookup Table. + * 11 = The forwarding map in FORWARD replaces the forwarding map + * from the Address Lookup Table. + * 0x0D - FORWARD[n:0] + * Bits 7:0 - FORWARD[n:0] - Forwarding map. Bit 0 = port 1, + * bit 1 = port 2, etc. + * 1 = enable forwarding to this port + * 0 = do not forward to this port + */ +void ksz9477_acl_action_rule_cfg(u8 *entry, bool force_prio, u8 prio_val) +{ + u8 prio_mode, val; + + if (force_prio) + prio_mode = KSZ9477_ACL_PM_REPLACE; + else + prio_mode = KSZ9477_ACL_PM_DISABLE; + + val = FIELD_PREP(KSZ9477_ACL_PM_M, prio_mode) | + FIELD_PREP(KSZ9477_ACL_P_M, prio_val); + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_A, val); + + /* no port or VLAN PCP remapping for now */ + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_B, 0); + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_D, 0); +} + +/** + * ksz9477_acl_processing_rule_set_action - Set the action for the processing + * rule set. + * @entry: Pointer to the ACL entry + * @action_idx: Index of the action to be applied + * + * This function sets the action for the processing rule set by updating the + * appropriate register in the entry. There can be only one action per + * processing rule. + * + * Access Control List (ACL) Processing Rule Registers: + * + * 0x00 - First Rule Number (FRN) + * Bits 3:0 - First Rule Number. Pointer to an Action rule entry. + */ +void ksz9477_acl_processing_rule_set_action(u8 *entry, u8 action_idx) +{ + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_0, action_idx); +} + +/** + * ksz9477_acl_processing_rule_add_match - Add a matching rule to the rule set + * @entry: Pointer to the ACL entry + * @match_idx: Index of the matching rule to be added + * + * This function adds a matching rule to the rule set by updating the + * appropriate bits in the entry's rule set registers. + * + * Access Control List (ACL) Processing Rule Registers: + * + * 0x0E - RuleSet [15:8] + * Bits 7:0 - RuleSet [15:8] Specifies a set of one or more Matching rule + * entries. RuleSet has one bit for each of the 16 Matching rule entries. + * If multiple Matching rules are selected, then all conditions will be + * AND'ed to produce a final match result. + * 0 = Matching rule not selected + * 1 = Matching rule selected + * + * 0x0F - RuleSet [7:0] + * Bits 7:0 - RuleSet [7:0] + */ +static void ksz9477_acl_processing_rule_add_match(u8 *entry, u8 match_idx) +{ + u8 vale = entry[KSZ9477_ACL_PORT_ACCESS_E]; + u8 valf = entry[KSZ9477_ACL_PORT_ACCESS_F]; + + if (match_idx < 8) + valf |= BIT(match_idx); + else + vale |= BIT(match_idx - 8); + + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_E, vale); + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_F, valf); +} + +/** + * ksz9477_acl_get_init_entry - Get a new uninitialized entry for a specified + * port on a ksz_device. + * @dev: The ksz_device instance. + * @port: The port number to get the uninitialized entry for. + * @cookie: The cookie to associate with the entry. + * @prio: The priority to associate with the entry. + * + * This function retrieves the next available ACL entry for the specified port, + * clears all access flags, and associates it with the current cookie. + * + * Returns: A pointer to the new uninitialized ACL entry. + */ +static struct ksz9477_acl_entry * +ksz9477_acl_get_init_entry(struct ksz_device *dev, int port, + unsigned long cookie, u32 prio) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + struct ksz9477_acl_entry *entry; + + entry = &acles->entries[acles->entries_count]; + entry->cookie = cookie; + entry->prio = prio; + + /* clear all access flags */ + entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0; + entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0; + + return entry; +} + +/** + * ksz9477_acl_match_process_l2 - Configure Layer 2 ACL matching rules and + * processing rules. + * @dev: Pointer to the ksz_device. + * @port: Port number. + * @ethtype: Ethernet type. + * @src_mac: Source MAC address. + * @dst_mac: Destination MAC address. + * @cookie: The cookie to associate with the entry. + * @prio: The priority of the entry. + * + * This function sets up matching and processing rules for Layer 2 ACLs. + * It takes into account that only one MAC per entry is supported. + */ +void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port, + u16 ethtype, u8 *src_mac, u8 *dst_mac, + unsigned long cookie, u32 prio) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + struct ksz9477_acl_entry *entry; + + entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio); + + /* ACL supports only one MAC per entry */ + if (src_mac && dst_mac) { + ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, src_mac, + true); + + /* Add both match entries to first processing rule */ + ksz9477_acl_processing_rule_add_match(entry->entry, + acles->entries_count); + acles->entries_count++; + ksz9477_acl_processing_rule_add_match(entry->entry, + acles->entries_count); + + entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio); + ksz9477_acl_matching_rule_cfg_l2(entry->entry, 0, dst_mac, + false); + acles->entries_count++; + } else { + u8 *mac = src_mac ? src_mac : dst_mac; + bool is_src = src_mac ? true : false; + + ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, mac, + is_src); + ksz9477_acl_processing_rule_add_match(entry->entry, + acles->entries_count); + acles->entries_count++; + } +} |