diff options
Diffstat (limited to 'drivers/net/dsa/realtek')
-rw-r--r-- | drivers/net/dsa/realtek/Kconfig | 20 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/Makefile | 13 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/realtek-mdio.c | 205 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/realtek-mdio.h | 48 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/realtek-smi.c | 279 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/realtek-smi.h | 48 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/realtek.h | 14 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/rtl8365mb.c | 132 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/rtl8366-core.c | 22 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/rtl8366rb.c | 206 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/rtl83xx.c | 332 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/rtl83xx.h | 24 |
12 files changed, 760 insertions, 583 deletions
diff --git a/drivers/net/dsa/realtek/Kconfig b/drivers/net/dsa/realtek/Kconfig index 060165a85f..6989972eeb 100644 --- a/drivers/net/dsa/realtek/Kconfig +++ b/drivers/net/dsa/realtek/Kconfig @@ -16,37 +16,29 @@ menuconfig NET_DSA_REALTEK if NET_DSA_REALTEK config NET_DSA_REALTEK_MDIO - tristate "Realtek MDIO interface driver" + bool "Realtek MDIO interface support" depends on OF - depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB - depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB - depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB help Select to enable support for registering switches configured through MDIO. config NET_DSA_REALTEK_SMI - tristate "Realtek SMI interface driver" + bool "Realtek SMI interface support" depends on OF - depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB - depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB - depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB help Select to enable support for registering switches connected through SMI. config NET_DSA_REALTEK_RTL8365MB - tristate "Realtek RTL8365MB switch subdriver" - imply NET_DSA_REALTEK_SMI - imply NET_DSA_REALTEK_MDIO + tristate "Realtek RTL8365MB switch driver" + depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO select NET_DSA_TAG_RTL8_4 help Select to enable support for Realtek RTL8365MB-VC and RTL8367S. config NET_DSA_REALTEK_RTL8366RB - tristate "Realtek RTL8366RB switch subdriver" - imply NET_DSA_REALTEK_SMI - imply NET_DSA_REALTEK_MDIO + tristate "Realtek RTL8366RB switch driver" + depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO select NET_DSA_TAG_RTL4_A help Select to enable support for Realtek RTL8366RB. diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile index 0aab57252a..35491dc20d 100644 --- a/drivers/net/dsa/realtek/Makefile +++ b/drivers/net/dsa/realtek/Makefile @@ -1,6 +1,15 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_NET_DSA_REALTEK_MDIO) += realtek-mdio.o -obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o +obj-$(CONFIG_NET_DSA_REALTEK) += realtek_dsa.o +realtek_dsa-objs := rtl83xx.o + +ifdef CONFIG_NET_DSA_REALTEK_MDIO +realtek_dsa-objs += realtek-mdio.o +endif + +ifdef CONFIG_NET_DSA_REALTEK_SMI +realtek_dsa-objs += realtek-smi.o +endif + obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o rtl8366-objs := rtl8366-core.o rtl8366rb.o obj-$(CONFIG_NET_DSA_REALTEK_RTL8365MB) += rtl8365mb.o diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c index 292e6d087e..04b758e5a6 100644 --- a/drivers/net/dsa/realtek/realtek-mdio.c +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -25,6 +25,8 @@ #include <linux/regmap.h> #include "realtek.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" /* Read/write via mdiobus */ #define REALTEK_MDIO_CTRL0_REG 31 @@ -99,192 +101,87 @@ out_unlock: return ret; } -static void realtek_mdio_lock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_lock(&priv->map_lock); -} - -static void realtek_mdio_unlock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_unlock(&priv->map_lock); -} - -static const struct regmap_config realtek_mdio_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, +static const struct realtek_interface_info realtek_mdio_info = { .reg_read = realtek_mdio_read, .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .lock = realtek_mdio_lock, - .unlock = realtek_mdio_unlock, }; -static const struct regmap_config realtek_mdio_nolock_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_mdio_read, - .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .disable_locking = true, -}; - -static int realtek_mdio_probe(struct mdio_device *mdiodev) +/** + * realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch + * @mdiodev: mdio_device to probe on. + * + * This function should be used as the .probe in an mdio_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for MDIO-connected devices. Finally, it calls a common + * function to register the DSA switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: Returns 0 on success, a negative error on failure. + */ +int realtek_mdio_probe(struct mdio_device *mdiodev) { - struct realtek_priv *priv; struct device *dev = &mdiodev->dev; - const struct realtek_variant *var; - struct regmap_config rc; - struct device_node *np; + struct realtek_priv *priv; int ret; - var = of_device_get_match_data(dev); - if (!var) - return -EINVAL; - - priv = devm_kzalloc(&mdiodev->dev, - size_add(sizeof(*priv), var->chip_data_sz), - GFP_KERNEL); - if (!priv) - return -ENOMEM; - - mutex_init(&priv->map_lock); + priv = rtl83xx_probe(dev, &realtek_mdio_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); - rc = realtek_mdio_regmap_config; - rc.lock_arg = priv; - priv->map = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map)) { - ret = PTR_ERR(priv->map); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - rc = realtek_mdio_nolock_regmap_config; - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map_nolock)) { - ret = PTR_ERR(priv->map_nolock); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - priv->mdio_addr = mdiodev->addr; priv->bus = mdiodev->bus; - priv->dev = &mdiodev->dev; - priv->chip_data = (void *)priv + sizeof(*priv); - - priv->clk_delay = var->clk_delay; - priv->cmd_read = var->cmd_read; - priv->cmd_write = var->cmd_write; - priv->ops = var->ops; - + priv->mdio_addr = mdiodev->addr; priv->write_reg_noack = realtek_mdio_write; - np = dev->of_node; - - dev_set_drvdata(dev, priv); - - /* TODO: if power is software controlled, set up any regulators here */ - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); - - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(priv->reset)) { - dev_err(dev, "failed to get RESET GPIO\n"); - return PTR_ERR(priv->reset); - } - - if (priv->reset) { - gpiod_set_value(priv->reset, 1); - dev_dbg(dev, "asserted RESET\n"); - msleep(REALTEK_HW_STOP_DELAY); - gpiod_set_value(priv->reset, 0); - msleep(REALTEK_HW_START_DELAY); - dev_dbg(dev, "deasserted RESET\n"); - } - - ret = priv->ops->detect(priv); - if (ret) { - dev_err(dev, "unable to detect switch\n"); - return ret; - } - - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->num_ports; - priv->ds->priv = priv; - priv->ds->ops = var->ds_ops_mdio; - - ret = dsa_register_switch(priv->ds); + ret = rtl83xx_register_switch(priv); if (ret) { - dev_err(priv->dev, "unable to register switch ret = %d\n", ret); + rtl83xx_remove(priv); return ret; } return 0; } +EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA); -static void realtek_mdio_remove(struct mdio_device *mdiodev) +/** + * realtek_mdio_remove() - Remove the driver of an MDIO-connected switch + * @mdiodev: mdio_device to be removed. + * + * This function should be used as the .remove_new in an mdio_driver. First + * it unregisters the DSA switch and then it calls the common remove function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_remove(struct mdio_device *mdiodev) { struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); if (!priv) return; - dsa_unregister_switch(priv->ds); + rtl83xx_unregister_switch(priv); - /* leave the device reset asserted */ - if (priv->reset) - gpiod_set_value(priv->reset, 1); + rtl83xx_remove(priv); } +EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA); -static void realtek_mdio_shutdown(struct mdio_device *mdiodev) +/** + * realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch + * @mdiodev: mdio_device shutting down. + * + * This function should be used as the .shutdown in a platform_driver. It calls + * the common shutdown function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_shutdown(struct mdio_device *mdiodev) { struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); if (!priv) return; - dsa_switch_shutdown(priv->ds); - - dev_set_drvdata(&mdiodev->dev, NULL); + rtl83xx_shutdown(priv); } - -static const struct of_device_id realtek_mdio_of_match[] = { -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) - { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, }, -#endif -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) - { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, }, -#endif - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, realtek_mdio_of_match); - -static struct mdio_driver realtek_mdio_driver = { - .mdiodrv.driver = { - .name = "realtek-mdio", - .of_match_table = realtek_mdio_of_match, - }, - .probe = realtek_mdio_probe, - .remove = realtek_mdio_remove, - .shutdown = realtek_mdio_shutdown, -}; - -mdio_module_driver(realtek_mdio_driver); - -MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>"); -MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface"); -MODULE_LICENSE("GPL"); +EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/realtek-mdio.h b/drivers/net/dsa/realtek/realtek-mdio.h new file mode 100644 index 0000000000..ee70f6a5b8 --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-mdio.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _REALTEK_MDIO_H +#define _REALTEK_MDIO_H + +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) + +static inline int realtek_mdio_driver_register(struct mdio_driver *drv) +{ + return mdio_driver_register(drv); +} + +static inline void realtek_mdio_driver_unregister(struct mdio_driver *drv) +{ + mdio_driver_unregister(drv); +} + +int realtek_mdio_probe(struct mdio_device *mdiodev); +void realtek_mdio_remove(struct mdio_device *mdiodev); +void realtek_mdio_shutdown(struct mdio_device *mdiodev); + +#else /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) */ + +static inline int realtek_mdio_driver_register(struct mdio_driver *drv) +{ + return 0; +} + +static inline void realtek_mdio_driver_unregister(struct mdio_driver *drv) +{ +} + +static inline int realtek_mdio_probe(struct mdio_device *mdiodev) +{ + return -ENOENT; +} + +static inline void realtek_mdio_remove(struct mdio_device *mdiodev) +{ +} + +static inline void realtek_mdio_shutdown(struct mdio_device *mdiodev) +{ +} + +#endif /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) */ + +#endif /* _REALTEK_MDIO_H */ diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c index 755546ed8d..88590ae95a 100644 --- a/drivers/net/dsa/realtek/realtek-smi.c +++ b/drivers/net/dsa/realtek/realtek-smi.c @@ -31,7 +31,6 @@ #include <linux/spinlock.h> #include <linux/skbuff.h> #include <linux/of.h> -#include <linux/of_mdio.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/platform_device.h> @@ -40,12 +39,14 @@ #include <linux/if_bridge.h> #include "realtek.h" +#include "realtek-smi.h" +#include "rtl83xx.h" #define REALTEK_SMI_ACK_RETRY_COUNT 5 static inline void realtek_smi_clk_delay(struct realtek_priv *priv) { - ndelay(priv->clk_delay); + ndelay(priv->variant->clk_delay); } static void realtek_smi_start(struct realtek_priv *priv) @@ -208,7 +209,7 @@ static int realtek_smi_read_reg(struct realtek_priv *priv, u32 addr, u32 *data) realtek_smi_start(priv); /* Send READ command */ - ret = realtek_smi_write_byte(priv, priv->cmd_read); + ret = realtek_smi_write_byte(priv, priv->variant->cmd_read); if (ret) goto out; @@ -249,7 +250,7 @@ static int realtek_smi_write_reg(struct realtek_priv *priv, realtek_smi_start(priv); /* Send WRITE command */ - ret = realtek_smi_write_byte(priv, priv->cmd_write); + ret = realtek_smi_write_byte(priv, priv->variant->cmd_write); if (ret) goto out; @@ -310,258 +311,98 @@ static int realtek_smi_read(void *ctx, u32 reg, u32 *val) return realtek_smi_read_reg(priv, reg, val); } -static void realtek_smi_lock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_lock(&priv->map_lock); -} - -static void realtek_smi_unlock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_unlock(&priv->map_lock); -} - -static const struct regmap_config realtek_smi_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, +static const struct realtek_interface_info realtek_smi_info = { .reg_read = realtek_smi_read, .reg_write = realtek_smi_write, - .cache_type = REGCACHE_NONE, - .lock = realtek_smi_lock, - .unlock = realtek_smi_unlock, }; -static const struct regmap_config realtek_smi_nolock_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_smi_read, - .reg_write = realtek_smi_write, - .cache_type = REGCACHE_NONE, - .disable_locking = true, -}; - -static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum) -{ - struct realtek_priv *priv = bus->priv; - - return priv->ops->phy_read(priv, addr, regnum); -} - -static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum, - u16 val) -{ - struct realtek_priv *priv = bus->priv; - - return priv->ops->phy_write(priv, addr, regnum, val); -} - -static int realtek_smi_setup_mdio(struct dsa_switch *ds) -{ - struct realtek_priv *priv = ds->priv; - struct device_node *mdio_np; - int ret; - - mdio_np = of_get_compatible_child(priv->dev->of_node, "realtek,smi-mdio"); - if (!mdio_np) { - dev_err(priv->dev, "no MDIO bus node\n"); - return -ENODEV; - } - - priv->user_mii_bus = devm_mdiobus_alloc(priv->dev); - if (!priv->user_mii_bus) { - ret = -ENOMEM; - goto err_put_node; - } - priv->user_mii_bus->priv = priv; - priv->user_mii_bus->name = "SMI user MII"; - priv->user_mii_bus->read = realtek_smi_mdio_read; - priv->user_mii_bus->write = realtek_smi_mdio_write; - snprintf(priv->user_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d", - ds->index); - priv->user_mii_bus->dev.of_node = mdio_np; - priv->user_mii_bus->parent = priv->dev; - ds->user_mii_bus = priv->user_mii_bus; - - ret = devm_of_mdiobus_register(priv->dev, priv->user_mii_bus, mdio_np); - if (ret) { - dev_err(priv->dev, "unable to register MDIO bus %s\n", - priv->user_mii_bus->id); - goto err_put_node; - } - - return 0; - -err_put_node: - of_node_put(mdio_np); - - return ret; -} - -static int realtek_smi_probe(struct platform_device *pdev) +/** + * realtek_smi_probe() - Probe a platform device for an SMI-connected switch + * @pdev: platform_device to probe on. + * + * This function should be used as the .probe in a platform_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for SMI-connected devices. Finally, it calls a common + * function to register the DSA switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: Returns 0 on success, a negative error on failure. + */ +int realtek_smi_probe(struct platform_device *pdev) { - const struct realtek_variant *var; struct device *dev = &pdev->dev; struct realtek_priv *priv; - struct regmap_config rc; - struct device_node *np; int ret; - var = of_device_get_match_data(dev); - np = dev->of_node; - - priv = devm_kzalloc(dev, sizeof(*priv) + var->chip_data_sz, GFP_KERNEL); - if (!priv) - return -ENOMEM; - priv->chip_data = (void *)priv + sizeof(*priv); - - mutex_init(&priv->map_lock); - - rc = realtek_smi_regmap_config; - rc.lock_arg = priv; - priv->map = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map)) { - ret = PTR_ERR(priv->map); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - rc = realtek_smi_nolock_regmap_config; - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map_nolock)) { - ret = PTR_ERR(priv->map_nolock); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - /* Link forward and backward */ - priv->dev = dev; - priv->clk_delay = var->clk_delay; - priv->cmd_read = var->cmd_read; - priv->cmd_write = var->cmd_write; - priv->ops = var->ops; - - priv->setup_interface = realtek_smi_setup_mdio; - priv->write_reg_noack = realtek_smi_write_reg_noack; - - dev_set_drvdata(dev, priv); - spin_lock_init(&priv->lock); - - /* TODO: if power is software controlled, set up any regulators here */ - - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(priv->reset)) { - dev_err(dev, "failed to get RESET GPIO\n"); - return PTR_ERR(priv->reset); - } - if (priv->reset) { - gpiod_set_value(priv->reset, 1); - dev_dbg(dev, "asserted RESET\n"); - msleep(REALTEK_HW_STOP_DELAY); - gpiod_set_value(priv->reset, 0); - msleep(REALTEK_HW_START_DELAY); - dev_dbg(dev, "deasserted RESET\n"); - } + priv = rtl83xx_probe(dev, &realtek_smi_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); /* Fetch MDIO pins */ priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW); - if (IS_ERR(priv->mdc)) + if (IS_ERR(priv->mdc)) { + rtl83xx_remove(priv); return PTR_ERR(priv->mdc); + } + priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW); - if (IS_ERR(priv->mdio)) + if (IS_ERR(priv->mdio)) { + rtl83xx_remove(priv); return PTR_ERR(priv->mdio); - - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); - - ret = priv->ops->detect(priv); - if (ret) { - dev_err(dev, "unable to detect switch\n"); - return ret; } - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->num_ports; - priv->ds->priv = priv; + priv->write_reg_noack = realtek_smi_write_reg_noack; - priv->ds->ops = var->ds_ops_smi; - ret = dsa_register_switch(priv->ds); + ret = rtl83xx_register_switch(priv); if (ret) { - dev_err_probe(dev, ret, "unable to register switch\n"); + rtl83xx_remove(priv); return ret; } + return 0; } +EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA); -static void realtek_smi_remove(struct platform_device *pdev) +/** + * realtek_smi_remove() - Remove the driver of a SMI-connected switch + * @pdev: platform_device to be removed. + * + * This function should be used as the .remove_new in a platform_driver. First + * it unregisters the DSA switch and then it calls the common remove function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_smi_remove(struct platform_device *pdev) { struct realtek_priv *priv = platform_get_drvdata(pdev); if (!priv) return; - dsa_unregister_switch(priv->ds); - if (priv->user_mii_bus) - of_node_put(priv->user_mii_bus->dev.of_node); + rtl83xx_unregister_switch(priv); - /* leave the device reset asserted */ - if (priv->reset) - gpiod_set_value(priv->reset, 1); + rtl83xx_remove(priv); } +EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, REALTEK_DSA); -static void realtek_smi_shutdown(struct platform_device *pdev) +/** + * realtek_smi_shutdown() - Shutdown the driver of a SMI-connected switch + * @pdev: platform_device shutting down. + * + * This function should be used as the .shutdown in a platform_driver. It calls + * the common shutdown function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_smi_shutdown(struct platform_device *pdev) { struct realtek_priv *priv = platform_get_drvdata(pdev); if (!priv) return; - dsa_switch_shutdown(priv->ds); - - platform_set_drvdata(pdev, NULL); + rtl83xx_shutdown(priv); } - -static const struct of_device_id realtek_smi_of_match[] = { -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) - { - .compatible = "realtek,rtl8366rb", - .data = &rtl8366rb_variant, - }, -#endif -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) - { - .compatible = "realtek,rtl8365mb", - .data = &rtl8365mb_variant, - }, -#endif - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, realtek_smi_of_match); - -static struct platform_driver realtek_smi_driver = { - .driver = { - .name = "realtek-smi", - .of_match_table = realtek_smi_of_match, - }, - .probe = realtek_smi_probe, - .remove_new = realtek_smi_remove, - .shutdown = realtek_smi_shutdown, -}; -module_platform_driver(realtek_smi_driver); - -MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); -MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via SMI interface"); -MODULE_LICENSE("GPL"); +EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/realtek-smi.h b/drivers/net/dsa/realtek/realtek-smi.h new file mode 100644 index 0000000000..ea49a2edd3 --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-smi.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _REALTEK_SMI_H +#define _REALTEK_SMI_H + +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) + +static inline int realtek_smi_driver_register(struct platform_driver *drv) +{ + return platform_driver_register(drv); +} + +static inline void realtek_smi_driver_unregister(struct platform_driver *drv) +{ + platform_driver_unregister(drv); +} + +int realtek_smi_probe(struct platform_device *pdev); +void realtek_smi_remove(struct platform_device *pdev); +void realtek_smi_shutdown(struct platform_device *pdev); + +#else /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) */ + +static inline int realtek_smi_driver_register(struct platform_driver *drv) +{ + return 0; +} + +static inline void realtek_smi_driver_unregister(struct platform_driver *drv) +{ +} + +static inline int realtek_smi_probe(struct platform_device *pdev) +{ + return -ENOENT; +} + +static inline void realtek_smi_remove(struct platform_device *pdev) +{ +} + +static inline void realtek_smi_shutdown(struct platform_device *pdev) +{ +} + +#endif /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) */ + +#endif /* _REALTEK_SMI_H */ diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h index 790488e9c6..e0b1aa0133 100644 --- a/drivers/net/dsa/realtek/realtek.h +++ b/drivers/net/dsa/realtek/realtek.h @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/gpio/consumer.h> #include <net/dsa.h> +#include <linux/reset.h> #define REALTEK_HW_STOP_DELAY 25 /* msecs */ #define REALTEK_HW_START_DELAY 100 /* msecs */ @@ -48,6 +49,7 @@ struct rtl8366_vlan_4k { struct realtek_priv { struct device *dev; + struct reset_control *reset_ctl; struct gpio_desc *reset; struct gpio_desc *mdc; struct gpio_desc *mdio; @@ -58,11 +60,10 @@ struct realtek_priv { struct mii_bus *bus; int mdio_addr; - unsigned int clk_delay; - u8 cmd_read; - u8 cmd_write; + const struct realtek_variant *variant; + spinlock_t lock; /* Locks around command writes */ - struct dsa_switch *ds; + struct dsa_switch ds; struct irq_domain *irqdomain; bool leds_disabled; @@ -73,7 +74,6 @@ struct realtek_priv { struct rtl8366_mib_counter *mib_counters; const struct realtek_ops *ops; - int (*setup_interface)(struct dsa_switch *ds); int (*write_reg_noack)(void *ctx, u32 addr, u32 data); int vlan_enabled; @@ -91,7 +91,6 @@ struct realtek_ops { int (*detect)(struct realtek_priv *priv); int (*reset_chip)(struct realtek_priv *priv); int (*setup)(struct realtek_priv *priv); - void (*cleanup)(struct realtek_priv *priv); int (*get_mib_counter)(struct realtek_priv *priv, int port, struct rtl8366_mib_counter *mib, @@ -116,8 +115,7 @@ struct realtek_ops { }; struct realtek_variant { - const struct dsa_switch_ops *ds_ops_smi; - const struct dsa_switch_ops *ds_ops_mdio; + const struct dsa_switch_ops *ds_ops; const struct realtek_ops *ops; unsigned int clk_delay; u8 cmd_read; diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c index b072045eb1..12665a8a34 100644 --- a/drivers/net/dsa/realtek/rtl8365mb.c +++ b/drivers/net/dsa/realtek/rtl8365mb.c @@ -101,6 +101,9 @@ #include <linux/if_vlan.h> #include "realtek.h" +#include "realtek-smi.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" /* Family-specific data and limits */ #define RTL8365MB_PHYADDRMAX 7 @@ -206,10 +209,10 @@ #define RTL8365MB_EXT_PORT_MODE_100FX 13 /* External interface mode configuration registers 0~1 */ -#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 0x1305 /* EXT1 */ +#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 0x1305 /* EXT0,EXT1 */ #define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 0x13C3 /* EXT2 */ #define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(_extint) \ - ((_extint) == 1 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 : \ + ((_extint) <= 1 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 : \ (_extint) == 2 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 : \ 0x0) #define RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK(_extint) \ @@ -689,7 +692,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy, u32 val; int ret; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = rtl8365mb_phy_poll_busy(priv); if (ret) @@ -722,7 +725,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy, *data = val & 0xFFFF; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } @@ -733,7 +736,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy, u32 val; int ret; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = rtl8365mb_phy_poll_busy(priv); if (ret) @@ -764,7 +767,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy, goto out; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return 0; } @@ -825,17 +828,6 @@ static int rtl8365mb_phy_write(struct realtek_priv *priv, int phy, int regnum, return 0; } -static int rtl8365mb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum) -{ - return rtl8365mb_phy_read(ds->priv, phy, regnum); -} - -static int rtl8365mb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum, - u16 val) -{ - return rtl8365mb_phy_write(ds->priv, phy, regnum, val); -} - static const struct rtl8365mb_extint * rtl8365mb_get_port_extint(struct realtek_priv *priv, int port) { @@ -878,6 +870,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, { const struct rtl8365mb_extint *extint = rtl8365mb_get_port_extint(priv, port); + struct dsa_switch *ds = &priv->ds; struct device_node *dn; struct dsa_port *dp; int tx_delay = 0; @@ -888,7 +881,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, if (!extint) return -ENODEV; - dp = dsa_to_port(priv->ds, port); + dp = dsa_to_port(ds, port); dn = dp->dn; /* Set the RGMII TX/RX delay @@ -1541,6 +1534,7 @@ static void rtl8365mb_get_stats64(struct dsa_switch *ds, int port, static void rtl8365mb_stats_setup(struct realtek_priv *priv) { struct rtl8365mb *mb = priv->chip_data; + struct dsa_switch *ds = &priv->ds; int i; /* Per-chip global mutex to protect MIB counter access, since doing @@ -1551,7 +1545,7 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv) for (i = 0; i < priv->num_ports; i++) { struct rtl8365mb_port *p = &mb->ports[i]; - if (dsa_is_unused_port(priv->ds, i)) + if (dsa_is_unused_port(ds, i)) continue; /* Per-port spinlock to protect the stats64 data */ @@ -1567,12 +1561,13 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv) static void rtl8365mb_stats_teardown(struct realtek_priv *priv) { struct rtl8365mb *mb = priv->chip_data; + struct dsa_switch *ds = &priv->ds; int i; for (i = 0; i < priv->num_ports; i++) { struct rtl8365mb_port *p = &mb->ports[i]; - if (dsa_is_unused_port(priv->ds, i)) + if (dsa_is_unused_port(ds, i)) continue; cancel_delayed_work_sync(&p->mib_work); @@ -1971,7 +1966,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) dev_info(priv->dev, "no interrupt support\n"); /* Configure CPU tagging */ - dsa_switch_for_each_cpu_port(cpu_dp, priv->ds) { + dsa_switch_for_each_cpu_port(cpu_dp, ds) { cpu->mask |= BIT(cpu_dp->index); if (cpu->trap_port == RTL8365MB_MAX_NUM_PORTS) @@ -1986,7 +1981,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) for (i = 0; i < priv->num_ports; i++) { struct rtl8365mb_port *p = &mb->ports[i]; - if (dsa_is_unused_port(priv->ds, i)) + if (dsa_is_unused_port(ds, i)) continue; /* Forward only to the CPU */ @@ -2003,7 +1998,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) * ports will still forward frames to the CPU despite being * administratively down by default. */ - rtl8365mb_port_stp_state_set(priv->ds, i, BR_STATE_DISABLED); + rtl8365mb_port_stp_state_set(ds, i, BR_STATE_DISABLED); /* Set up per-port private data */ p->priv = priv; @@ -2014,12 +2009,10 @@ static int rtl8365mb_setup(struct dsa_switch *ds) if (ret) goto out_teardown_irq; - if (priv->setup_interface) { - ret = priv->setup_interface(ds); - if (ret) { - dev_err(priv->dev, "could not set up MDIO bus\n"); - goto out_teardown_irq; - } + ret = rtl83xx_setup_user_mdio(ds); + if (ret) { + dev_err(priv->dev, "could not set up MDIO bus\n"); + goto out_teardown_irq; } /* Start statistics counter polling */ @@ -2113,7 +2106,7 @@ static int rtl8365mb_detect(struct realtek_priv *priv) return 0; } -static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = { +static const struct dsa_switch_ops rtl8365mb_switch_ops = { .get_tag_protocol = rtl8365mb_get_tag_protocol, .change_tag_protocol = rtl8365mb_change_tag_protocol, .setup = rtl8365mb_setup, @@ -2134,29 +2127,6 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = { .port_max_mtu = rtl8365mb_port_max_mtu, }; -static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = { - .get_tag_protocol = rtl8365mb_get_tag_protocol, - .change_tag_protocol = rtl8365mb_change_tag_protocol, - .setup = rtl8365mb_setup, - .teardown = rtl8365mb_teardown, - .phylink_get_caps = rtl8365mb_phylink_get_caps, - .phylink_mac_config = rtl8365mb_phylink_mac_config, - .phylink_mac_link_down = rtl8365mb_phylink_mac_link_down, - .phylink_mac_link_up = rtl8365mb_phylink_mac_link_up, - .phy_read = rtl8365mb_dsa_phy_read, - .phy_write = rtl8365mb_dsa_phy_write, - .port_stp_state_set = rtl8365mb_port_stp_state_set, - .get_strings = rtl8365mb_get_strings, - .get_ethtool_stats = rtl8365mb_get_ethtool_stats, - .get_sset_count = rtl8365mb_get_sset_count, - .get_eth_phy_stats = rtl8365mb_get_phy_stats, - .get_eth_mac_stats = rtl8365mb_get_mac_stats, - .get_eth_ctrl_stats = rtl8365mb_get_ctrl_stats, - .get_stats64 = rtl8365mb_get_stats64, - .port_change_mtu = rtl8365mb_port_change_mtu, - .port_max_mtu = rtl8365mb_port_max_mtu, -}; - static const struct realtek_ops rtl8365mb_ops = { .detect = rtl8365mb_detect, .phy_read = rtl8365mb_phy_read, @@ -2164,16 +2134,66 @@ static const struct realtek_ops rtl8365mb_ops = { }; const struct realtek_variant rtl8365mb_variant = { - .ds_ops_smi = &rtl8365mb_switch_ops_smi, - .ds_ops_mdio = &rtl8365mb_switch_ops_mdio, + .ds_ops = &rtl8365mb_switch_ops, .ops = &rtl8365mb_ops, .clk_delay = 10, .cmd_read = 0xb9, .cmd_write = 0xb8, .chip_data_sz = sizeof(struct rtl8365mb), }; -EXPORT_SYMBOL_GPL(rtl8365mb_variant); + +static const struct of_device_id rtl8365mb_of_match[] = { + { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rtl8365mb_of_match); + +static struct platform_driver rtl8365mb_smi_driver = { + .driver = { + .name = "rtl8365mb-smi", + .of_match_table = rtl8365mb_of_match, + }, + .probe = realtek_smi_probe, + .remove_new = realtek_smi_remove, + .shutdown = realtek_smi_shutdown, +}; + +static struct mdio_driver rtl8365mb_mdio_driver = { + .mdiodrv.driver = { + .name = "rtl8365mb-mdio", + .of_match_table = rtl8365mb_of_match, + }, + .probe = realtek_mdio_probe, + .remove = realtek_mdio_remove, + .shutdown = realtek_mdio_shutdown, +}; + +static int rtl8365mb_init(void) +{ + int ret; + + ret = realtek_mdio_driver_register(&rtl8365mb_mdio_driver); + if (ret) + return ret; + + ret = realtek_smi_driver_register(&rtl8365mb_smi_driver); + if (ret) { + realtek_mdio_driver_unregister(&rtl8365mb_mdio_driver); + return ret; + } + + return 0; +} +module_init(rtl8365mb_init); + +static void __exit rtl8365mb_exit(void) +{ + realtek_smi_driver_unregister(&rtl8365mb_smi_driver); + realtek_mdio_driver_unregister(&rtl8365mb_mdio_driver); +} +module_exit(rtl8365mb_exit); MODULE_AUTHOR("Alvin Šipraga <alsi@bang-olufsen.dk>"); MODULE_DESCRIPTION("Driver for RTL8365MB-VC ethernet switch"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/rtl8366-core.c b/drivers/net/dsa/realtek/rtl8366-core.c index 59f98d2c87..7c6520ba3a 100644 --- a/drivers/net/dsa/realtek/rtl8366-core.c +++ b/drivers/net/dsa/realtek/rtl8366-core.c @@ -34,7 +34,7 @@ int rtl8366_mc_is_used(struct realtek_priv *priv, int mc_index, int *used) return 0; } -EXPORT_SYMBOL_GPL(rtl8366_mc_is_used); +EXPORT_SYMBOL_NS_GPL(rtl8366_mc_is_used, REALTEK_DSA); /** * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration @@ -187,7 +187,7 @@ int rtl8366_set_vlan(struct realtek_priv *priv, int vid, u32 member, return ret; } -EXPORT_SYMBOL_GPL(rtl8366_set_vlan); +EXPORT_SYMBOL_NS_GPL(rtl8366_set_vlan, REALTEK_DSA); int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port, unsigned int vid) @@ -217,7 +217,7 @@ int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port, return 0; } -EXPORT_SYMBOL_GPL(rtl8366_set_pvid); +EXPORT_SYMBOL_NS_GPL(rtl8366_set_pvid, REALTEK_DSA); int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable) { @@ -243,7 +243,7 @@ int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable) priv->vlan4k_enabled = enable; return 0; } -EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k); +EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan4k, REALTEK_DSA); int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable) { @@ -265,7 +265,7 @@ int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable) return ret; } -EXPORT_SYMBOL_GPL(rtl8366_enable_vlan); +EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan, REALTEK_DSA); int rtl8366_reset_vlan(struct realtek_priv *priv) { @@ -290,7 +290,7 @@ int rtl8366_reset_vlan(struct realtek_priv *priv) return 0; } -EXPORT_SYMBOL_GPL(rtl8366_reset_vlan); +EXPORT_SYMBOL_NS_GPL(rtl8366_reset_vlan, REALTEK_DSA); int rtl8366_vlan_add(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan, @@ -345,7 +345,7 @@ int rtl8366_vlan_add(struct dsa_switch *ds, int port, return 0; } -EXPORT_SYMBOL_GPL(rtl8366_vlan_add); +EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_add, REALTEK_DSA); int rtl8366_vlan_del(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan) @@ -389,7 +389,7 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port, return 0; } -EXPORT_SYMBOL_GPL(rtl8366_vlan_del); +EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_del, REALTEK_DSA); void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) @@ -403,7 +403,7 @@ void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset, for (i = 0; i < priv->num_mib_counters; i++) ethtool_puts(&data, priv->mib_counters[i].name); } -EXPORT_SYMBOL_GPL(rtl8366_get_strings); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_strings, REALTEK_DSA); int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset) { @@ -417,7 +417,7 @@ int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset) return priv->num_mib_counters; } -EXPORT_SYMBOL_GPL(rtl8366_get_sset_count); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_sset_count, REALTEK_DSA); void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) { @@ -441,4 +441,4 @@ void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) data[i] = mibvalue; } } -EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_ethtool_stats, REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c index e3b6a470ca..5ccb1a3a14 100644 --- a/drivers/net/dsa/realtek/rtl8366rb.c +++ b/drivers/net/dsa/realtek/rtl8366rb.c @@ -23,6 +23,9 @@ #include <linux/regmap.h> #include "realtek.h" +#include "realtek-smi.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" #define RTL8366RB_PORT_NUM_CPU 5 #define RTL8366RB_NUM_PORTS 6 @@ -182,7 +185,12 @@ #define RTL8366RB_LED_BLINKRATE_222MS 0x0004 #define RTL8366RB_LED_BLINKRATE_446MS 0x0005 +/* LED trigger event for each group */ #define RTL8366RB_LED_CTRL_REG 0x0431 +#define RTL8366RB_LED_CTRL_OFFSET(led_group) \ + (4 * (led_group)) +#define RTL8366RB_LED_CTRL_MASK(led_group) \ + (0xf << RTL8366RB_LED_CTRL_OFFSET(led_group)) #define RTL8366RB_LED_OFF 0x0 #define RTL8366RB_LED_DUP_COL 0x1 #define RTL8366RB_LED_LINK_ACT 0x2 @@ -199,6 +207,11 @@ #define RTL8366RB_LED_LINK_TX 0xd #define RTL8366RB_LED_MASTER 0xe #define RTL8366RB_LED_FORCE 0xf + +/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only + * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is + * RTL8366RB_LED_FORCE. Otherwise, it is ignored. + */ #define RTL8366RB_LED_0_1_CTRL_REG 0x0432 #define RTL8366RB_LED_1_OFFSET 6 #define RTL8366RB_LED_2_3_CTRL_REG 0x0433 @@ -999,27 +1012,19 @@ static int rtl8366rb_setup(struct dsa_switch *ds) if (priv->leds_disabled) { /* Turn everything off */ regmap_update_bits(priv->map, - RTL8366RB_LED_0_1_CTRL_REG, - 0x0FFF, 0); - regmap_update_bits(priv->map, - RTL8366RB_LED_2_3_CTRL_REG, - 0x0FFF, 0); - regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_CONTROL_REG, RTL8366RB_P4_RGMII_LED, 0); - val = RTL8366RB_LED_OFF; - } else { - /* TODO: make this configurable per LED */ - val = RTL8366RB_LED_FORCE; - } - for (i = 0; i < 4; i++) { - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_CTRL_REG, - 0xf << (i * 4), - val << (i * 4)); - if (ret) - return ret; + + for (i = 0; i < RTL8366RB_NUM_LEDGROUPS; i++) { + val = RTL8366RB_LED_OFF << RTL8366RB_LED_CTRL_OFFSET(i); + ret = regmap_update_bits(priv->map, + RTL8366RB_LED_CTRL_REG, + RTL8366RB_LED_CTRL_MASK(i), + val); + if (ret) + return ret; + } } ret = rtl8366_reset_vlan(priv); @@ -1030,12 +1035,10 @@ static int rtl8366rb_setup(struct dsa_switch *ds) if (ret) dev_info(priv->dev, "no interrupt support\n"); - if (priv->setup_interface) { - ret = priv->setup_interface(ds); - if (ret) { - dev_err(priv->dev, "could not set up MDIO bus\n"); - return -ENODEV; - } + ret = rtl83xx_setup_user_mdio(ds); + if (ret) { + dev_err(priv->dev, "could not set up MDIO bus\n"); + return -ENODEV; } return 0; @@ -1166,52 +1169,6 @@ rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, } } -static void rb8366rb_set_port_led(struct realtek_priv *priv, - int port, bool enable) -{ - u16 val = enable ? 0x3f : 0; - int ret; - - if (priv->leds_disabled) - return; - - switch (port) { - case 0: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_0_1_CTRL_REG, - 0x3F, val); - break; - case 1: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_0_1_CTRL_REG, - 0x3F << RTL8366RB_LED_1_OFFSET, - val << RTL8366RB_LED_1_OFFSET); - break; - case 2: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_2_3_CTRL_REG, - 0x3F, val); - break; - case 3: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_2_3_CTRL_REG, - 0x3F << RTL8366RB_LED_3_OFFSET, - val << RTL8366RB_LED_3_OFFSET); - break; - case 4: - ret = regmap_update_bits(priv->map, - RTL8366RB_INTERRUPT_CONTROL_REG, - RTL8366RB_P4_RGMII_LED, - enable ? RTL8366RB_P4_RGMII_LED : 0); - break; - default: - dev_err(priv->dev, "no LED for port %d\n", port); - return; - } - if (ret) - dev_err(priv->dev, "error updating LED on port %d\n", port); -} - static int rtl8366rb_port_enable(struct dsa_switch *ds, int port, struct phy_device *phy) @@ -1225,7 +1182,6 @@ rtl8366rb_port_enable(struct dsa_switch *ds, int port, if (ret) return ret; - rb8366rb_set_port_led(priv, port, true); return 0; } @@ -1240,8 +1196,6 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port) BIT(port)); if (ret) return; - - rb8366rb_set_port_led(priv, port, false); } static int @@ -1650,6 +1604,7 @@ static int rtl8366rb_get_mc_index(struct realtek_priv *priv, int port, int *val) static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index) { + struct dsa_switch *ds = &priv->ds; struct rtl8366rb *rb; bool pvid_enabled; int ret; @@ -1674,7 +1629,7 @@ static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index * not drop any untagged or C-tagged frames. Make sure to update the * filtering setting. */ - if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port))) + if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled); return ret; @@ -1718,7 +1673,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) if (phy > RTL8366RB_PHY_NO_MAX) return -EINVAL; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, RTL8366RB_PHY_CTRL_READ); @@ -1746,7 +1701,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) phy, regnum, reg, val); out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } @@ -1760,7 +1715,7 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, if (phy > RTL8366RB_PHY_NO_MAX) return -EINVAL; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, RTL8366RB_PHY_CTRL_WRITE); @@ -1777,22 +1732,11 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, goto out; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } -static int rtl8366rb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum) -{ - return rtl8366rb_phy_read(ds->priv, phy, regnum); -} - -static int rtl8366rb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum, - u16 val) -{ - return rtl8366rb_phy_write(ds->priv, phy, regnum, val); -} - static int rtl8366rb_reset_chip(struct realtek_priv *priv) { int timeout = 10; @@ -1858,7 +1802,7 @@ static int rtl8366rb_detect(struct realtek_priv *priv) return 0; } -static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = { +static const struct dsa_switch_ops rtl8366rb_switch_ops = { .get_tag_protocol = rtl8366_get_tag_protocol, .setup = rtl8366rb_setup, .phylink_get_caps = rtl8366rb_phylink_get_caps, @@ -1882,32 +1826,6 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = { .port_max_mtu = rtl8366rb_max_mtu, }; -static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = { - .get_tag_protocol = rtl8366_get_tag_protocol, - .setup = rtl8366rb_setup, - .phy_read = rtl8366rb_dsa_phy_read, - .phy_write = rtl8366rb_dsa_phy_write, - .phylink_get_caps = rtl8366rb_phylink_get_caps, - .phylink_mac_link_up = rtl8366rb_mac_link_up, - .phylink_mac_link_down = rtl8366rb_mac_link_down, - .get_strings = rtl8366_get_strings, - .get_ethtool_stats = rtl8366_get_ethtool_stats, - .get_sset_count = rtl8366_get_sset_count, - .port_bridge_join = rtl8366rb_port_bridge_join, - .port_bridge_leave = rtl8366rb_port_bridge_leave, - .port_vlan_filtering = rtl8366rb_vlan_filtering, - .port_vlan_add = rtl8366_vlan_add, - .port_vlan_del = rtl8366_vlan_del, - .port_enable = rtl8366rb_port_enable, - .port_disable = rtl8366rb_port_disable, - .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, - .port_bridge_flags = rtl8366rb_port_bridge_flags, - .port_stp_state_set = rtl8366rb_port_stp_state_set, - .port_fast_age = rtl8366rb_port_fast_age, - .port_change_mtu = rtl8366rb_change_mtu, - .port_max_mtu = rtl8366rb_max_mtu, -}; - static const struct realtek_ops rtl8366rb_ops = { .detect = rtl8366rb_detect, .get_vlan_mc = rtl8366rb_get_vlan_mc, @@ -1925,16 +1843,66 @@ static const struct realtek_ops rtl8366rb_ops = { }; const struct realtek_variant rtl8366rb_variant = { - .ds_ops_smi = &rtl8366rb_switch_ops_smi, - .ds_ops_mdio = &rtl8366rb_switch_ops_mdio, + .ds_ops = &rtl8366rb_switch_ops, .ops = &rtl8366rb_ops, .clk_delay = 10, .cmd_read = 0xa9, .cmd_write = 0xa8, .chip_data_sz = sizeof(struct rtl8366rb), }; -EXPORT_SYMBOL_GPL(rtl8366rb_variant); + +static const struct of_device_id rtl8366rb_of_match[] = { + { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rtl8366rb_of_match); + +static struct platform_driver rtl8366rb_smi_driver = { + .driver = { + .name = "rtl8366rb-smi", + .of_match_table = rtl8366rb_of_match, + }, + .probe = realtek_smi_probe, + .remove_new = realtek_smi_remove, + .shutdown = realtek_smi_shutdown, +}; + +static struct mdio_driver rtl8366rb_mdio_driver = { + .mdiodrv.driver = { + .name = "rtl8366rb-mdio", + .of_match_table = rtl8366rb_of_match, + }, + .probe = realtek_mdio_probe, + .remove = realtek_mdio_remove, + .shutdown = realtek_mdio_shutdown, +}; + +static int rtl8366rb_init(void) +{ + int ret; + + ret = realtek_mdio_driver_register(&rtl8366rb_mdio_driver); + if (ret) + return ret; + + ret = realtek_smi_driver_register(&rtl8366rb_smi_driver); + if (ret) { + realtek_mdio_driver_unregister(&rtl8366rb_mdio_driver); + return ret; + } + + return 0; +} +module_init(rtl8366rb_init); + +static void __exit rtl8366rb_exit(void) +{ + realtek_smi_driver_unregister(&rtl8366rb_smi_driver); + realtek_mdio_driver_unregister(&rtl8366rb_mdio_driver); +} +module_exit(rtl8366rb_exit); MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(REALTEK_DSA); diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c new file mode 100644 index 0000000000..a9c1702431 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl83xx.c @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/of_mdio.h> + +#include "realtek.h" +#include "rtl83xx.h" + +/** + * rtl83xx_lock() - Locks the mutex used by regmaps + * @ctx: realtek_priv pointer + * + * This function is passed to regmap to be used as the lock function. + * It is also used externally to block regmap before executing multiple + * operations that must happen in sequence (which will use + * realtek_priv.map_nolock instead). + * + * Context: Can sleep. Holds priv->map_lock lock. + * Return: nothing + */ +void rtl83xx_lock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_lock(&priv->map_lock); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_lock, REALTEK_DSA); + +/** + * rtl83xx_unlock() - Unlocks the mutex used by regmaps + * @ctx: realtek_priv pointer + * + * This function unlocks the lock acquired by rtl83xx_lock. + * + * Context: Releases priv->map_lock lock. + * Return: nothing + */ +void rtl83xx_unlock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_unlock(&priv->map_lock); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, REALTEK_DSA); + +static int rtl83xx_user_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct realtek_priv *priv = bus->priv; + + return priv->ops->phy_read(priv, addr, regnum); +} + +static int rtl83xx_user_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct realtek_priv *priv = bus->priv; + + return priv->ops->phy_write(priv, addr, regnum, val); +} + +/** + * rtl83xx_setup_user_mdio() - register the user mii bus driver + * @ds: DSA switch associated with this user_mii_bus + * + * Registers the MDIO bus for built-in Ethernet PHYs, and associates it with + * the mandatory 'mdio' child OF node of the switch. + * + * Context: Can sleep. + * Return: 0 on success, negative value for failure. + */ +int rtl83xx_setup_user_mdio(struct dsa_switch *ds) +{ + struct realtek_priv *priv = ds->priv; + struct device_node *mdio_np; + struct mii_bus *bus; + int ret = 0; + + mdio_np = of_get_child_by_name(priv->dev->of_node, "mdio"); + if (!mdio_np) { + dev_err(priv->dev, "no MDIO bus node\n"); + return -ENODEV; + } + + bus = devm_mdiobus_alloc(priv->dev); + if (!bus) { + ret = -ENOMEM; + goto err_put_node; + } + + bus->priv = priv; + bus->name = "Realtek user MII"; + bus->read = rtl83xx_user_mdio_read; + bus->write = rtl83xx_user_mdio_write; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s:user_mii", dev_name(priv->dev)); + bus->parent = priv->dev; + + ret = devm_of_mdiobus_register(priv->dev, bus, mdio_np); + if (ret) { + dev_err(priv->dev, "unable to register MDIO bus %s\n", + bus->id); + goto err_put_node; + } + + priv->user_mii_bus = bus; + +err_put_node: + of_node_put(mdio_np); + + return ret; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_setup_user_mdio, REALTEK_DSA); + +/** + * rtl83xx_probe() - probe a Realtek switch + * @dev: the device being probed + * @interface_info: specific management interface info. + * + * This function initializes realtek_priv and reads data from the device tree + * node. The switch is hard resetted if a method is provided. + * + * Context: Can sleep. + * Return: Pointer to the realtek_priv or ERR_PTR() in case of failure. + * + * The realtek_priv pointer does not need to be freed as it is controlled by + * devres. + */ +struct realtek_priv * +rtl83xx_probe(struct device *dev, + const struct realtek_interface_info *interface_info) +{ + const struct realtek_variant *var; + struct realtek_priv *priv; + struct regmap_config rc = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = interface_info->reg_read, + .reg_write = interface_info->reg_write, + .cache_type = REGCACHE_NONE, + .lock = rtl83xx_lock, + .unlock = rtl83xx_unlock, + }; + int ret; + + var = of_device_get_match_data(dev); + if (!var) + return ERR_PTR(-EINVAL); + + priv = devm_kzalloc(dev, size_add(sizeof(*priv), var->chip_data_sz), + GFP_KERNEL); + if (!priv) + return ERR_PTR(-ENOMEM); + + mutex_init(&priv->map_lock); + + rc.lock_arg = priv; + priv->map = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map)) { + ret = PTR_ERR(priv->map); + dev_err(dev, "regmap init failed: %d\n", ret); + return ERR_PTR(ret); + } + + rc.disable_locking = true; + priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map_nolock)) { + ret = PTR_ERR(priv->map_nolock); + dev_err(dev, "regmap init failed: %d\n", ret); + return ERR_PTR(ret); + } + + /* Link forward and backward */ + priv->dev = dev; + priv->variant = var; + priv->ops = var->ops; + priv->chip_data = (void *)priv + sizeof(*priv); + + spin_lock_init(&priv->lock); + + priv->leds_disabled = of_property_read_bool(dev->of_node, + "realtek,disable-leds"); + + /* TODO: if power is software controlled, set up any regulators here */ + priv->reset_ctl = devm_reset_control_get_optional(dev, NULL); + if (IS_ERR(priv->reset_ctl)) { + ret = PTR_ERR(priv->reset_ctl); + dev_err_probe(dev, ret, "failed to get reset control\n"); + return ERR_CAST(priv->reset_ctl); + } + + priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return ERR_CAST(priv->reset); + } + + dev_set_drvdata(dev, priv); + + if (priv->reset_ctl || priv->reset) { + rtl83xx_reset_assert(priv); + dev_dbg(dev, "asserted RESET\n"); + msleep(REALTEK_HW_STOP_DELAY); + rtl83xx_reset_deassert(priv); + msleep(REALTEK_HW_START_DELAY); + dev_dbg(dev, "deasserted RESET\n"); + } + + return priv; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_probe, REALTEK_DSA); + +/** + * rtl83xx_register_switch() - detects and register a switch + * @priv: realtek_priv pointer + * + * This function first checks the switch chip ID and register a DSA + * switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: 0 on success, negative value for failure. + */ +int rtl83xx_register_switch(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + int ret; + + ret = priv->ops->detect(priv); + if (ret) { + dev_err_probe(priv->dev, ret, "unable to detect switch\n"); + return ret; + } + + ds->priv = priv; + ds->dev = priv->dev; + ds->ops = priv->variant->ds_ops; + ds->num_ports = priv->num_ports; + + ret = dsa_register_switch(ds); + if (ret) { + dev_err_probe(priv->dev, ret, "unable to register switch\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, REALTEK_DSA); + +/** + * rtl83xx_unregister_switch() - unregister a switch + * @priv: realtek_priv pointer + * + * This function unregister a DSA switch. + * + * Context: Can sleep. + * Return: Nothing. + */ +void rtl83xx_unregister_switch(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + + dsa_unregister_switch(ds); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, REALTEK_DSA); + +/** + * rtl83xx_shutdown() - shutdown a switch + * @priv: realtek_priv pointer + * + * This function shuts down the DSA switch and cleans the platform driver data, + * to prevent realtek_{smi,mdio}_remove() from running afterwards, which is + * possible if the parent bus implements its own .shutdown() as .remove(). + * + * Context: Can sleep. + * Return: Nothing. + */ +void rtl83xx_shutdown(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + + dsa_switch_shutdown(ds); + + dev_set_drvdata(priv->dev, NULL); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, REALTEK_DSA); + +/** + * rtl83xx_remove() - Cleanup a realtek switch driver + * @priv: realtek_priv pointer + * + * Placehold for common cleanup procedures. + * + * Context: Any + * Return: nothing + */ +void rtl83xx_remove(struct realtek_priv *priv) +{ +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, REALTEK_DSA); + +void rtl83xx_reset_assert(struct realtek_priv *priv) +{ + int ret; + + ret = reset_control_assert(priv->reset_ctl); + if (ret) + dev_warn(priv->dev, + "Failed to assert the switch reset control: %pe\n", + ERR_PTR(ret)); + + gpiod_set_value(priv->reset, true); +} + +void rtl83xx_reset_deassert(struct realtek_priv *priv) +{ + int ret; + + ret = reset_control_deassert(priv->reset_ctl); + if (ret) + dev_warn(priv->dev, + "Failed to deassert the switch reset control: %pe\n", + ERR_PTR(ret)); + + gpiod_set_value(priv->reset, false); +} + +MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>"); +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("Realtek DSA switches common module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/realtek/rtl83xx.h b/drivers/net/dsa/realtek/rtl83xx.h new file mode 100644 index 0000000000..c8a0ff8fd7 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl83xx.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _RTL83XX_H +#define _RTL83XX_H + +struct realtek_interface_info { + int (*reg_read)(void *ctx, u32 reg, u32 *val); + int (*reg_write)(void *ctx, u32 reg, u32 val); +}; + +void rtl83xx_lock(void *ctx); +void rtl83xx_unlock(void *ctx); +int rtl83xx_setup_user_mdio(struct dsa_switch *ds); +struct realtek_priv * +rtl83xx_probe(struct device *dev, + const struct realtek_interface_info *interface_info); +int rtl83xx_register_switch(struct realtek_priv *priv); +void rtl83xx_unregister_switch(struct realtek_priv *priv); +void rtl83xx_shutdown(struct realtek_priv *priv); +void rtl83xx_remove(struct realtek_priv *priv); +void rtl83xx_reset_assert(struct realtek_priv *priv); +void rtl83xx_reset_deassert(struct realtek_priv *priv); + +#endif /* _RTL83XX_H */ |