diff options
Diffstat (limited to 'drivers/net/ethernet/cavium/liquidio/octeon_device.h')
| -rw-r--r-- | drivers/net/ethernet/cavium/liquidio/octeon_device.h | 911 |
1 files changed, 911 insertions, 0 deletions
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_device.h b/drivers/net/ethernet/cavium/liquidio/octeon_device.h new file mode 100644 index 0000000000..fb380b4f3e --- /dev/null +++ b/drivers/net/ethernet/cavium/liquidio/octeon_device.h @@ -0,0 +1,911 @@ +/********************************************************************** + * Author: Cavium, Inc. + * + * Contact: support@cavium.com + * Please include "LiquidIO" in the subject. + * + * Copyright (c) 2003-2016 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more details. + ***********************************************************************/ +/*! \file octeon_device.h + * \brief Host Driver: This file defines the octeon device structure. + */ + +#ifndef _OCTEON_DEVICE_H_ +#define _OCTEON_DEVICE_H_ + +#include <linux/interrupt.h> +#include <net/devlink.h> + +/** PCI VendorId Device Id */ +#define OCTEON_CN68XX_PCIID 0x91177d +#define OCTEON_CN66XX_PCIID 0x92177d +#define OCTEON_CN23XX_PCIID_PF 0x9702177d +/** Driver identifies chips by these Ids, created by clubbing together + * DeviceId+RevisionId; Where Revision Id is not used to distinguish + * between chips, a value of 0 is used for revision id. + */ +#define OCTEON_CN68XX 0x0091 +#define OCTEON_CN66XX 0x0092 +#define OCTEON_CN23XX_PF_VID 0x9702 +#define OCTEON_CN23XX_VF_VID 0x9712 + +/**RevisionId for the chips */ +#define OCTEON_CN23XX_REV_1_0 0x00 +#define OCTEON_CN23XX_REV_1_1 0x01 +#define OCTEON_CN23XX_REV_2_0 0x80 + +/**SubsystemId for the chips */ +#define OCTEON_CN2350_10GB_SUBSYS_ID_1 0X3177d +#define OCTEON_CN2350_10GB_SUBSYS_ID_2 0X4177d +#define OCTEON_CN2360_10GB_SUBSYS_ID 0X5177d +#define OCTEON_CN2350_25GB_SUBSYS_ID 0X7177d +#define OCTEON_CN2360_25GB_SUBSYS_ID 0X6177d + +/** Endian-swap modes supported by Octeon. */ +enum octeon_pci_swap_mode { + OCTEON_PCI_PASSTHROUGH = 0, + OCTEON_PCI_64BIT_SWAP = 1, + OCTEON_PCI_32BIT_BYTE_SWAP = 2, + OCTEON_PCI_32BIT_LW_SWAP = 3 +}; + +enum lio_fw_state { + FW_IS_PRELOADED = 0, + FW_NEEDS_TO_BE_LOADED = 1, + FW_IS_BEING_LOADED = 2, + FW_HAS_BEEN_LOADED = 3, +}; + +enum { + OCTEON_CONFIG_TYPE_DEFAULT = 0, + NUM_OCTEON_CONFS, +}; + +#define OCTEON_INPUT_INTR (1) +#define OCTEON_OUTPUT_INTR (2) +#define OCTEON_MBOX_INTR (4) +#define OCTEON_ALL_INTR 0xff + +/*--------------- PCI BAR1 index registers -------------*/ + +/* BAR1 Mask */ +#define PCI_BAR1_ENABLE_CA 1 +#define PCI_BAR1_ENDIAN_MODE OCTEON_PCI_64BIT_SWAP +#define PCI_BAR1_ENTRY_VALID 1 +#define PCI_BAR1_MASK ((PCI_BAR1_ENABLE_CA << 3) \ + | (PCI_BAR1_ENDIAN_MODE << 1) \ + | PCI_BAR1_ENTRY_VALID) + +/** Octeon Device state. + * Each octeon device goes through each of these states + * as it is initialized. + */ +#define OCT_DEV_BEGIN_STATE 0x0 +#define OCT_DEV_PCI_ENABLE_DONE 0x1 +#define OCT_DEV_PCI_MAP_DONE 0x2 +#define OCT_DEV_DISPATCH_INIT_DONE 0x3 +#define OCT_DEV_INSTR_QUEUE_INIT_DONE 0x4 +#define OCT_DEV_SC_BUFF_POOL_INIT_DONE 0x5 +#define OCT_DEV_RESP_LIST_INIT_DONE 0x6 +#define OCT_DEV_DROQ_INIT_DONE 0x7 +#define OCT_DEV_MBOX_SETUP_DONE 0x8 +#define OCT_DEV_MSIX_ALLOC_VECTOR_DONE 0x9 +#define OCT_DEV_INTR_SET_DONE 0xa +#define OCT_DEV_IO_QUEUES_DONE 0xb +#define OCT_DEV_CONSOLE_INIT_DONE 0xc +#define OCT_DEV_HOST_OK 0xd +#define OCT_DEV_CORE_OK 0xe +#define OCT_DEV_RUNNING 0xf +#define OCT_DEV_IN_RESET 0x10 +#define OCT_DEV_STATE_INVALID 0x11 + +#define OCT_DEV_STATES OCT_DEV_STATE_INVALID + +/** Octeon Device interrupts + * These interrupt bits are set in int_status filed of + * octeon_device structure + */ +#define OCT_DEV_INTR_DMA0_FORCE 0x01 +#define OCT_DEV_INTR_DMA1_FORCE 0x02 +#define OCT_DEV_INTR_PKT_DATA 0x04 + +#define LIO_RESET_SECS (3) + +/*---------------------------DISPATCH LIST-------------------------------*/ + +/** The dispatch list entry. + * The driver keeps a record of functions registered for each + * response header opcode in this structure. Since the opcode is + * hashed to index into the driver's list, more than one opcode + * can hash to the same entry, in which case the list field points + * to a linked list with the other entries. + */ +struct octeon_dispatch { + /** List head for this entry */ + struct list_head list; + + /** The opcode for which the dispatch function & arg should be used */ + u16 opcode; + + /** The function to be called for a packet received by the driver */ + octeon_dispatch_fn_t dispatch_fn; + + /* The application specified argument to be passed to the above + * function along with the received packet + */ + void *arg; +}; + +/** The dispatch list structure. */ +struct octeon_dispatch_list { + /** access to dispatch list must be atomic */ + spinlock_t lock; + + /** Count of dispatch functions currently registered */ + u32 count; + + /** The list of dispatch functions */ + struct octeon_dispatch *dlist; +}; + +/*----------------------- THE OCTEON DEVICE ---------------------------*/ + +#define OCT_MEM_REGIONS 3 +/** PCI address space mapping information. + * Each of the 3 address spaces given by BAR0, BAR2 and BAR4 of + * Octeon gets mapped to different physical address spaces in + * the kernel. + */ +struct octeon_mmio { + /** PCI address to which the BAR is mapped. */ + u64 start; + + /** Length of this PCI address space. */ + u32 len; + + /** Length that has been mapped to phys. address space. */ + u32 mapped_len; + + /** The physical address to which the PCI address space is mapped. */ + u8 __iomem *hw_addr; + + /** Flag indicating the mapping was successful. */ + u32 done; +}; + +#define MAX_OCTEON_MAPS 32 + +struct octeon_io_enable { + u64 iq; + u64 oq; + u64 iq64B; +}; + +struct octeon_reg_list { + u32 __iomem *pci_win_wr_addr_hi; + u32 __iomem *pci_win_wr_addr_lo; + u64 __iomem *pci_win_wr_addr; + + u32 __iomem *pci_win_rd_addr_hi; + u32 __iomem *pci_win_rd_addr_lo; + u64 __iomem *pci_win_rd_addr; + + u32 __iomem *pci_win_wr_data_hi; + u32 __iomem *pci_win_wr_data_lo; + u64 __iomem *pci_win_wr_data; + + u32 __iomem *pci_win_rd_data_hi; + u32 __iomem *pci_win_rd_data_lo; + u64 __iomem *pci_win_rd_data; +}; + +#define OCTEON_CONSOLE_MAX_READ_BYTES 512 +typedef int (*octeon_console_print_fn)(struct octeon_device *oct, + u32 num, char *pre, char *suf); +struct octeon_console { + u32 active; + u32 waiting; + u64 addr; + u32 buffer_size; + u64 input_base_addr; + u64 output_base_addr; + octeon_console_print_fn print; + char leftover[OCTEON_CONSOLE_MAX_READ_BYTES]; +}; + +struct octeon_board_info { + char name[OCT_BOARD_NAME]; + char serial_number[OCT_SERIAL_LEN]; + u64 major; + u64 minor; +}; + +struct octeon_fn_list { + void (*setup_iq_regs)(struct octeon_device *, u32); + void (*setup_oq_regs)(struct octeon_device *, u32); + + irqreturn_t (*process_interrupt_regs)(void *); + u64 (*msix_interrupt_handler)(void *); + + int (*setup_mbox)(struct octeon_device *); + int (*free_mbox)(struct octeon_device *); + + int (*soft_reset)(struct octeon_device *); + int (*setup_device_regs)(struct octeon_device *); + void (*bar1_idx_setup)(struct octeon_device *, u64, u32, int); + void (*bar1_idx_write)(struct octeon_device *, u32, u32); + u32 (*bar1_idx_read)(struct octeon_device *, u32); + u32 (*update_iq_read_idx)(struct octeon_instr_queue *); + + void (*enable_oq_pkt_time_intr)(struct octeon_device *, u32); + void (*disable_oq_pkt_time_intr)(struct octeon_device *, u32); + + void (*enable_interrupt)(struct octeon_device *, u8); + void (*disable_interrupt)(struct octeon_device *, u8); + + int (*enable_io_queues)(struct octeon_device *); + void (*disable_io_queues)(struct octeon_device *); +}; + +/* Must be multiple of 8, changing breaks ABI */ +#define CVMX_BOOTMEM_NAME_LEN 128 + +/* Structure for named memory blocks + * Number of descriptors + * available can be changed without affecting compatibility, + * but name length changes require a bump in the bootmem + * descriptor version + * Note: This structure must be naturally 64 bit aligned, as a single + * memory image will be used by both 32 and 64 bit programs. + */ +struct cvmx_bootmem_named_block_desc { + /** Base address of named block */ + u64 base_addr; + + /** Size actually allocated for named block */ + u64 size; + + /** name of named block */ + char name[CVMX_BOOTMEM_NAME_LEN]; +}; + +struct oct_fw_info { + u32 max_nic_ports; /** max nic ports for the device */ + u32 num_gmx_ports; /** num gmx ports */ + u64 app_cap_flags; /** firmware cap flags */ + + /** The core application is running in this mode. + * See octeon-drv-opcodes.h for values. + */ + u32 app_mode; + char liquidio_firmware_version[32]; + /* Fields extracted from legacy string 'liquidio_firmware_version' */ + struct { + u8 maj; + u8 min; + u8 rev; + } ver; +}; + +#define OCT_FW_VER(maj, min, rev) \ + (((u32)(maj) << 16) | ((u32)(min) << 8) | ((u32)(rev))) + +/* wrappers around work structs */ +struct cavium_wk { + struct delayed_work work; + void *ctxptr; + u64 ctxul; +}; + +struct cavium_wq { + struct workqueue_struct *wq; + struct cavium_wk wk; +}; + +struct octdev_props { + /* Each interface in the Octeon device has a network + * device pointer (used for OS specific calls). + */ + int rx_on; + int fec; + int fec_boot; + int napi_enabled; + int gmxport; + struct net_device *netdev; +}; + +#define LIO_FLAG_MSIX_ENABLED 0x1 +#define MSIX_PO_INT 0x1 +#define MSIX_PI_INT 0x2 +#define MSIX_MBOX_INT 0x4 + +struct octeon_pf_vf_hs_word { +#ifdef __LITTLE_ENDIAN_BITFIELD + /** PKIND value assigned for the DPI interface */ + u64 pkind : 8; + + /** OCTEON core clock multiplier */ + u64 core_tics_per_us : 16; + + /** OCTEON coprocessor clock multiplier */ + u64 coproc_tics_per_us : 16; + + /** app that currently running on OCTEON */ + u64 app_mode : 8; + + /** RESERVED */ + u64 reserved : 16; + +#else + + /** RESERVED */ + u64 reserved : 16; + + /** app that currently running on OCTEON */ + u64 app_mode : 8; + + /** OCTEON coprocessor clock multiplier */ + u64 coproc_tics_per_us : 16; + + /** OCTEON core clock multiplier */ + u64 core_tics_per_us : 16; + + /** PKIND value assigned for the DPI interface */ + u64 pkind : 8; +#endif +}; + +struct octeon_sriov_info { + /* Number of rings assigned to VF */ + u32 rings_per_vf; + + /** Max Number of VF devices that can be enabled. This variable can + * specified during load time or it will be derived after allocating + * PF queues. When max_vfs is derived then each VF will get one queue + **/ + u32 max_vfs; + + /** Number of VF devices enabled using sysfs. */ + u32 num_vfs_alloced; + + /* Actual rings left for PF device */ + u32 num_pf_rings; + + /* SRN of PF usable IO queues */ + u32 pf_srn; + + /* total pf rings */ + u32 trs; + + u32 sriov_enabled; + + struct lio_trusted_vf trusted_vf; + + /*lookup table that maps DPI ring number to VF pci_dev struct pointer*/ + struct pci_dev *dpiring_to_vfpcidev_lut[MAX_POSSIBLE_VFS]; + + u64 vf_macaddr[MAX_POSSIBLE_VFS]; + + u16 vf_vlantci[MAX_POSSIBLE_VFS]; + + int vf_linkstate[MAX_POSSIBLE_VFS]; + + bool vf_spoofchk[MAX_POSSIBLE_VFS]; + + u64 vf_drv_loaded_mask; +}; + +struct octeon_ioq_vector { + struct octeon_device *oct_dev; + int iq_index; + int droq_index; + int vector; + struct octeon_mbox *mbox; + struct cpumask affinity_mask; + u32 ioq_num; +}; + +struct lio_vf_rep_list { + int num_vfs; + struct net_device *ndev[CN23XX_MAX_VFS_PER_PF]; +}; + +struct lio_devlink_priv { + struct octeon_device *oct; +}; + +/** The Octeon device. + * Each Octeon device has this structure to represent all its + * components. + */ +struct octeon_device { + /** Lock for PCI window configuration accesses */ + spinlock_t pci_win_lock; + + /** Lock for memory accesses */ + spinlock_t mem_access_lock; + + /** PCI device pointer */ + struct pci_dev *pci_dev; + + /** Chip specific information. */ + void *chip; + + /** Number of interfaces detected in this octeon device. */ + u32 ifcount; + + struct octdev_props props[MAX_OCTEON_LINKS]; + + /** Octeon Chip type. */ + u16 chip_id; + + u16 rev_id; + + u32 subsystem_id; + + u16 pf_num; + + u16 vf_num; + + /** This device's id - set by the driver. */ + u32 octeon_id; + + /** This device's PCIe port used for traffic. */ + u16 pcie_port; + + u16 flags; +#define LIO_FLAG_MSI_ENABLED (u32)(1 << 1) + + /** The state of this device */ + atomic_t status; + + /** memory mapped io range */ + struct octeon_mmio mmio[OCT_MEM_REGIONS]; + + struct octeon_reg_list reg_list; + + struct octeon_fn_list fn_list; + + struct octeon_board_info boardinfo; + + u32 num_iqs; + + /* The pool containing pre allocated buffers used for soft commands */ + struct octeon_sc_buffer_pool sc_buf_pool; + + /** The input instruction queues */ + struct octeon_instr_queue *instr_queue + [MAX_POSSIBLE_OCTEON_INSTR_QUEUES]; + + /** The doubly-linked list of instruction response */ + struct octeon_response_list response_list[MAX_RESPONSE_LISTS]; + + u32 num_oqs; + + /** The DROQ output queues */ + struct octeon_droq *droq[MAX_POSSIBLE_OCTEON_OUTPUT_QUEUES]; + + struct octeon_io_enable io_qmask; + + /** List of dispatch functions */ + struct octeon_dispatch_list dispatch; + + u32 int_status; + + u64 droq_intr; + + /** Physical location of the cvmx_bootmem_desc_t in octeon memory */ + u64 bootmem_desc_addr; + + /** Placeholder memory for named blocks. + * Assumes single-threaded access + */ + struct cvmx_bootmem_named_block_desc bootmem_named_block_desc; + + /** Address of consoles descriptor */ + u64 console_desc_addr; + + /** Number of consoles available. 0 means they are inaccessible */ + u32 num_consoles; + + /* Console caches */ + struct octeon_console console[MAX_OCTEON_MAPS]; + + /* Console named block info */ + struct { + u64 dram_region_base; + int bar1_index; + } console_nb_info; + + /* Coprocessor clock rate. */ + u64 coproc_clock_rate; + + /** The core application is running in this mode. See liquidio_common.h + * for values. + */ + u32 app_mode; + + struct oct_fw_info fw_info; + + /** The name given to this device. */ + char device_name[32]; + + /** Application Context */ + void *app_ctx; + + struct cavium_wq dma_comp_wq; + + /** Lock for dma response list */ + spinlock_t cmd_resp_wqlock; + u32 cmd_resp_state; + + struct cavium_wq check_db_wq[MAX_POSSIBLE_OCTEON_INSTR_QUEUES]; + + struct cavium_wk nic_poll_work; + + struct cavium_wk console_poll_work[MAX_OCTEON_MAPS]; + + void *priv; + + int num_msix_irqs; + + void *msix_entries; + + /* when requesting IRQs, the names are stored here */ + void *irq_name_storage; + + struct octeon_sriov_info sriov_info; + + struct octeon_pf_vf_hs_word pfvf_hsword; + + int msix_on; + + /** Mail Box details of each octeon queue. */ + struct octeon_mbox *mbox[MAX_POSSIBLE_VFS]; + + /** IOq information of it's corresponding MSI-X interrupt. */ + struct octeon_ioq_vector *ioq_vector; + + int rx_pause; + int tx_pause; + + struct oct_link_stats link_stats; /*stastics from firmware*/ + + /* private flags to control driver-specific features through ethtool */ + u32 priv_flags; + + void *watchdog_task; + + u32 rx_coalesce_usecs; + u32 rx_max_coalesced_frames; + u32 tx_max_coalesced_frames; + + bool cores_crashed; + + struct { + int bus; + int dev; + int func; + } loc; + + atomic_t *adapter_refcount; /* reference count of adapter */ + + atomic_t *adapter_fw_state; /* per-adapter, lio_fw_state */ + + bool ptp_enable; + + struct lio_vf_rep_list vf_rep_list; + struct devlink *devlink; + enum devlink_eswitch_mode eswitch_mode; + + /* for 25G NIC speed change */ + u8 speed_boot; + u8 speed_setting; + u8 no_speed_setting; + + u32 vfstats_poll; +#define LIO_VFSTATS_POLL 10 +}; + +#define OCT_DRV_ONLINE 1 +#define OCT_DRV_OFFLINE 2 +#define OCTEON_CN6XXX(oct) ({ \ + typeof(oct) _oct = (oct); \ + ((_oct->chip_id == OCTEON_CN66XX) || \ + (_oct->chip_id == OCTEON_CN68XX)); }) +#define OCTEON_CN23XX_PF(oct) ((oct)->chip_id == OCTEON_CN23XX_PF_VID) +#define OCTEON_CN23XX_VF(oct) ((oct)->chip_id == OCTEON_CN23XX_VF_VID) +#define CHIP_CONF(oct, TYPE) \ + (((struct octeon_ ## TYPE *)((oct)->chip))->conf) + +#define MAX_IO_PENDING_PKT_COUNT 100 + +/*------------------ Function Prototypes ----------------------*/ + +/** Initialize device list memory */ +void octeon_init_device_list(int conf_type); + +/** Free memory for Input and Output queue structures for a octeon device */ +void octeon_free_device_mem(struct octeon_device *oct); + +/* Look up a free entry in the octeon_device table and allocate resources + * for the octeon_device structure for an octeon device. Called at init + * time. + */ +struct octeon_device *octeon_allocate_device(u32 pci_id, + u32 priv_size); + +/** Register a device's bus location at initialization time. + * @param octeon_dev - pointer to the octeon device structure. + * @param bus - PCIe bus # + * @param dev - PCIe device # + * @param func - PCIe function # + * @param is_pf - TRUE for PF, FALSE for VF + * @return reference count of device's adapter + */ +int octeon_register_device(struct octeon_device *oct, + int bus, int dev, int func, int is_pf); + +/** Deregister a device at de-initialization time. + * @param octeon_dev - pointer to the octeon device structure. + * @return reference count of device's adapter + */ +int octeon_deregister_device(struct octeon_device *oct); + +/** Initialize the driver's dispatch list which is a mix of a hash table + * and a linked list. This is done at driver load time. + * @param octeon_dev - pointer to the octeon device structure. + * @return 0 on success, else -ve error value + */ +int octeon_init_dispatch_list(struct octeon_device *octeon_dev); + +/** Delete the driver's dispatch list and all registered entries. + * This is done at driver unload time. + * @param octeon_dev - pointer to the octeon device structure. + */ +void octeon_delete_dispatch_list(struct octeon_device *octeon_dev); + +/** Initialize the core device fields with the info returned by the FW. + * @param recv_info - Receive info structure + * @param buf - Receive buffer + */ +int octeon_core_drv_init(struct octeon_recv_info *recv_info, void *buf); + +/** Gets the dispatch function registered to receive packets with a + * given opcode/subcode. + * @param octeon_dev - the octeon device pointer. + * @param opcode - the opcode for which the dispatch function + * is to checked. + * @param subcode - the subcode for which the dispatch function + * is to checked. + * + * @return Success: octeon_dispatch_fn_t (dispatch function pointer) + * @return Failure: NULL + * + * Looks up the dispatch list to get the dispatch function for a + * given opcode. + */ +octeon_dispatch_fn_t +octeon_get_dispatch(struct octeon_device *octeon_dev, u16 opcode, + u16 subcode); + +/** Get the octeon device pointer. + * @param octeon_id - The id for which the octeon device pointer is required. + * @return Success: Octeon device pointer. + * @return Failure: NULL. + */ +struct octeon_device *lio_get_device(u32 octeon_id); + +/** Get the octeon id assigned to the octeon device passed as argument. + * This function is exported to other modules. + * @param dev - octeon device pointer passed as a void *. + * @return octeon device id + */ +int lio_get_device_id(void *dev); + +/** Read windowed register. + * @param oct - pointer to the Octeon device. + * @param addr - Address of the register to read. + * + * This routine is called to read from the indirectly accessed + * Octeon registers that are visible through a PCI BAR0 mapped window + * register. + * @return - 64 bit value read from the register. + */ + +u64 lio_pci_readq(struct octeon_device *oct, u64 addr); + +/** Write windowed register. + * @param oct - pointer to the Octeon device. + * @param val - Value to write + * @param addr - Address of the register to write + * + * This routine is called to write to the indirectly accessed + * Octeon registers that are visible through a PCI BAR0 mapped window + * register. + * @return Nothing. + */ +void lio_pci_writeq(struct octeon_device *oct, u64 val, u64 addr); + +/* Routines for reading and writing CSRs */ +#define octeon_write_csr(oct_dev, reg_off, value) \ + writel(value, (oct_dev)->mmio[0].hw_addr + (reg_off)) + +#define octeon_write_csr64(oct_dev, reg_off, val64) \ + writeq(val64, (oct_dev)->mmio[0].hw_addr + (reg_off)) + +#define octeon_read_csr(oct_dev, reg_off) \ + readl((oct_dev)->mmio[0].hw_addr + (reg_off)) + +#define octeon_read_csr64(oct_dev, reg_off) \ + readq((oct_dev)->mmio[0].hw_addr + (reg_off)) + +/** + * Checks if memory access is okay + * + * @param oct which octeon to send to + * @return Zero on success, negative on failure. + */ +int octeon_mem_access_ok(struct octeon_device *oct); + +/** + * Waits for DDR initialization. + * + * @param oct which octeon to send to + * @param timeout_in_ms pointer to how long to wait until DDR is initialized + * in ms. + * If contents are 0, it waits until contents are non-zero + * before starting to check. + * @return Zero on success, negative on failure. + */ +int octeon_wait_for_ddr_init(struct octeon_device *oct, + u32 *timeout_in_ms); + +/** + * Wait for u-boot to boot and be waiting for a command. + * + * @param wait_time_hundredths + * Maximum time to wait + * + * @return Zero on success, negative on failure. + */ +int octeon_wait_for_bootloader(struct octeon_device *oct, + u32 wait_time_hundredths); + +/** + * Initialize console access + * + * @param oct which octeon initialize + * @return Zero on success, negative on failure. + */ +int octeon_init_consoles(struct octeon_device *oct); + +/** + * Adds access to a console to the device. + * + * @param oct: which octeon to add to + * @param console_num: which console + * @param dbg_enb: ptr to debug enablement string, one of: + * * NULL for no debug output (i.e. disabled) + * * empty string enables debug output (via default method) + * * specific string to enable debug console output + * + * @return Zero on success, negative on failure. + */ +int octeon_add_console(struct octeon_device *oct, u32 console_num, + char *dbg_enb); + +/** write or read from a console */ +int octeon_console_write(struct octeon_device *oct, u32 console_num, + char *buffer, u32 write_request_size, u32 flags); +int octeon_console_write_avail(struct octeon_device *oct, u32 console_num); + +int octeon_console_read_avail(struct octeon_device *oct, u32 console_num); + +/** Removes all attached consoles. */ +void octeon_remove_consoles(struct octeon_device *oct); + +/** + * Send a string to u-boot on console 0 as a command. + * + * @param oct which octeon to send to + * @param cmd_str String to send + * @param wait_hundredths Time to wait for u-boot to accept the command. + * + * @return Zero on success, negative on failure. + */ +int octeon_console_send_cmd(struct octeon_device *oct, char *cmd_str, + u32 wait_hundredths); + +/** Parses, validates, and downloads firmware, then boots associated cores. + * @param oct which octeon to download firmware to + * @param data - The complete firmware file image + * @param size - The size of the data + * + * @return 0 if success. + * -EINVAL if file is incompatible or badly formatted. + * -ENODEV if no handler was found for the application type or an + * invalid octeon id was passed. + */ +int octeon_download_firmware(struct octeon_device *oct, const u8 *data, + size_t size); + +char *lio_get_state_string(atomic_t *state_ptr); + +/** Sets up instruction queues for the device + * @param oct which octeon to setup + * + * @return 0 if success. 1 if fails + */ +int octeon_setup_instr_queues(struct octeon_device *oct); + +/** Sets up output queues for the device + * @param oct which octeon to setup + * + * @return 0 if success. 1 if fails + */ +int octeon_setup_output_queues(struct octeon_device *oct); + +int octeon_get_tx_qsize(struct octeon_device *oct, u32 q_no); + +int octeon_get_rx_qsize(struct octeon_device *oct, u32 q_no); + +/** Turns off the input and output queues for the device + * @param oct which octeon to disable + */ +int octeon_set_io_queues_off(struct octeon_device *oct); + +/** Turns on or off the given output queue for the device + * @param oct which octeon to change + * @param q_no which queue + * @param enable 1 to enable, 0 to disable + */ +void octeon_set_droq_pkt_op(struct octeon_device *oct, u32 q_no, u32 enable); + +/** Retrieve the config for the device + * @param oct which octeon + * @param card_type type of card + * + * @returns pointer to configuration + */ +void *oct_get_config_info(struct octeon_device *oct, u16 card_type); + +/** Gets the octeon device configuration + * @return - pointer to the octeon configuration struture + */ +struct octeon_config *octeon_get_conf(struct octeon_device *oct); + +void octeon_free_ioq_vector(struct octeon_device *oct); +int octeon_allocate_ioq_vector(struct octeon_device *oct, u32 num_ioqs); +void lio_enable_irq(struct octeon_droq *droq, struct octeon_instr_queue *iq); + +/* LiquidIO driver pivate flags */ +enum { + OCT_PRIV_FLAG_TX_BYTES = 0, /* Tx interrupts by pending byte count */ +}; + +#define OCT_PRIV_FLAG_DEFAULT 0x0 + +static inline u32 lio_get_priv_flag(struct octeon_device *octdev, u32 flag) +{ + return !!(octdev->priv_flags & (0x1 << flag)); +} + +static inline void lio_set_priv_flag(struct octeon_device *octdev, + u32 flag, u32 val) +{ + if (val) + octdev->priv_flags |= (0x1 << flag); + else + octdev->priv_flags &= ~(0x1 << flag); +} +#endif |