diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 155 |
1 files changed, 79 insertions, 76 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 339e106a57..cdaf087b4e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -21,24 +21,24 @@ static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *, ixgbe_link_speed); -static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, +static int ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete); static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw); -static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, +static int ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, bool autoneg_wait_to_complete); -static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg_wait_to_complete); -static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, +static int ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete); +static int ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete); -static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); -static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, +static int ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); +static int ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data); -static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, +static int ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data); -static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw); +static int ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw); static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); bool ixgbe_mng_enabled(struct ixgbe_hw *hw) @@ -98,10 +98,10 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) } } -static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) +static int ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) { - s32 ret_val; u16 list_offset, data_offset, data_value; + int ret_val; if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { ixgbe_init_mac_link_ops_82599(hw); @@ -173,10 +173,10 @@ setup_sfp_err: * prot_autoc_write_82599(). Note, that locked can only be true in cases * where this function doesn't return an error. **/ -static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, +static int prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) { - s32 ret_val; + int ret_val; *locked = false; /* If LESM is on then we need to hold the SW/FW semaphore. */ @@ -203,9 +203,9 @@ static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, * This part (82599) may need to hold a the SW/FW lock around all writes to * AUTOC. Likewise after a write we need to do a pipeline reset. **/ -static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked) +static int prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked) { - s32 ret_val = 0; + int ret_val = 0; /* Blocked by MNG FW so bail */ if (ixgbe_check_reset_blocked(hw)) @@ -237,7 +237,7 @@ out: return ret_val; } -static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) +static int ixgbe_get_invariants_82599(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; @@ -263,11 +263,11 @@ static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) * not known. Perform the SFP init if necessary. * **/ -static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) +static int ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; struct ixgbe_phy_info *phy = &hw->phy; - s32 ret_val; + int ret_val; u32 esdp; if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) { @@ -322,7 +322,7 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) * * Determines the link capabilities by reading the AUTOC register. **/ -static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, +static int ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *autoneg) { @@ -334,7 +334,9 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core1) { *speed = IXGBE_LINK_SPEED_1GB_FULL; *autoneg = true; return 0; @@ -500,14 +502,14 @@ static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw) * Configures link settings based on values in the ixgbe_hw struct. * Restarts the link. Performs autonegotiation if needed. **/ -static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, - bool autoneg_wait_to_complete) +static int ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) { + bool got_lock = false; + int status = 0; u32 autoc_reg; u32 links_reg; u32 i; - s32 status = 0; - bool got_lock = false; if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { status = hw->mac.ops.acquire_swfw_sync(hw, @@ -657,15 +659,15 @@ ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) * * Implements the Intel SmartSpeed algorithm. **/ -static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg_wait_to_complete) +static int ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { - s32 status = 0; ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; - s32 i, j; - bool link_up = false; u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + bool link_up = false; + int status = 0; + s32 i, j; /* Set autoneg_advertised value based on input link speed */ hw->phy.autoneg_advertised = 0; @@ -767,16 +769,15 @@ out: * * Set the link speed in the AUTOC register and restarts link. **/ -static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, +static int ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete) { - bool autoneg = false; - s32 status; - u32 pma_pmd_1g, link_mode, links_reg, i; - u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + u32 pma_pmd_10g_serial, pma_pmd_1g, link_mode, links_reg, i; + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + bool autoneg = false; + int status; /* holds the value of AUTOC register at this current point in time */ u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); @@ -785,6 +786,8 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, /* temporary variable used for comparison purposes */ u32 autoc = current_autoc; + pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + /* Check to see if speed passed in is supported. */ status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg); @@ -882,11 +885,11 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, * * Restarts link on PHY and MAC based on settings passed in. **/ -static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, +static int ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete) { - s32 status; + int status; /* Setup the PHY according to input speed */ status = hw->phy.ops.setup_link_speed(hw, speed, @@ -905,13 +908,13 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, * and clears all interrupts, perform a PHY reset, and perform a link (MAC) * reset. **/ -static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) +static int ixgbe_reset_hw_82599(struct ixgbe_hw *hw) { ixgbe_link_speed link_speed; - s32 status; u32 ctrl, i, autoc, autoc2; - u32 curr_lms; bool link_up = false; + u32 curr_lms; + int status; /* Call adapter stop to disable tx/rx and clear interrupts */ status = hw->mac.ops.stop_adapter(hw); @@ -1081,7 +1084,7 @@ mac_reset_top: * @hw: pointer to hardware structure * @fdircmd: current value of FDIRCMD register */ -static s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd) +static int ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd) { int i; @@ -1099,12 +1102,12 @@ static s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd) * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. * @hw: pointer to hardware structure **/ -s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) +int ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) { - int i; u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); u32 fdircmd; - s32 err; + int err; + int i; fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; @@ -1212,7 +1215,7 @@ static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) * @fdirctrl: value to write to flow director control register, initially * contains just the value of the Rx packet buffer allocation **/ -s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) +int ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) { /* * Continue setup of fdirctrl register bits: @@ -1236,7 +1239,7 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) * @fdirctrl: value to write to flow director control register, initially * contains just the value of the Rx packet buffer allocation **/ -s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl) +int ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl) { /* * Continue setup of fdirctrl register bits: @@ -1359,7 +1362,7 @@ static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, * Note that the tunnel bit in input must not be set when the hardware * tunneling support does not exist. **/ -s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, +int ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, union ixgbe_atr_hash_dword input, union ixgbe_atr_hash_dword common, u8 queue) @@ -1515,7 +1518,7 @@ static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) #define IXGBE_STORE_AS_BE16(_value) __swab16(ntohs((_value))) -s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, +int ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, union ixgbe_atr_input *input_mask) { /* mask IPv6 since it is currently not supported */ @@ -1627,12 +1630,12 @@ s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, return 0; } -s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, +int ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, union ixgbe_atr_input *input, u16 soft_id, u8 queue) { u32 fdirport, fdirvlan, fdirhash, fdircmd; - s32 err; + int err; /* currently IPv6 is not supported, must be programmed with 0 */ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), @@ -1690,13 +1693,13 @@ s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, return 0; } -s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, +int ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, union ixgbe_atr_input *input, u16 soft_id) { u32 fdirhash; u32 fdircmd; - s32 err; + int err; /* configure FDIRHASH register */ fdirhash = (__force u32)input->formatted.bkt_hash; @@ -1734,7 +1737,7 @@ s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, * * Performs read operation to Omer analog register specified. **/ -static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) +static int ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) { u32 core_ctl; @@ -1756,7 +1759,7 @@ static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) * * Performs write operation to Omer analog register specified. **/ -static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) +static int ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) { u32 core_ctl; @@ -1776,9 +1779,9 @@ static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) * and the generation start_hw function. * Then performs revision-specific operations, if any. **/ -static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) +static int ixgbe_start_hw_82599(struct ixgbe_hw *hw) { - s32 ret_val = 0; + int ret_val = 0; ret_val = ixgbe_start_hw_generic(hw); if (ret_val) @@ -1802,9 +1805,9 @@ static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) * If PHY already detected, maintains current PHY type in hw struct, * otherwise executes the PHY detection routine. **/ -static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) +static int ixgbe_identify_phy_82599(struct ixgbe_hw *hw) { - s32 status; + int status; /* Detect PHY if not unknown - returns success if already detected. */ status = ixgbe_identify_phy_generic(hw); @@ -1835,7 +1838,7 @@ static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) * * Enables the Rx DMA unit for 82599 **/ -static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) +static int ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) { /* * Workaround for 82599 silicon errata when enabling the Rx datapath. @@ -1865,12 +1868,12 @@ static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) * Return: -EACCES if the FW is not present or if the FW version is * not supported. **/ -static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) +static int ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) { u16 fw_offset, fw_ptp_cfg_offset; - s32 status = -EACCES; - u16 offset; + int status = -EACCES; u16 fw_version = 0; + u16 offset; /* firmware check is only necessary for SFI devices */ if (hw->phy.media_type != ixgbe_media_type_fiber) @@ -1917,7 +1920,7 @@ fw_version_err: static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) { u16 fw_offset, fw_lesm_param_offset, fw_lesm_state; - s32 status; + int status; /* get the offset to the Firmware Module block */ status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); @@ -1956,7 +1959,7 @@ static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) * * Retrieves 16 bit word(s) read from EEPROM **/ -static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, +static int ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) { struct ixgbe_eeprom_info *eeprom = &hw->eeprom; @@ -1982,7 +1985,7 @@ static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, * * Reads a 16 bit word from the EEPROM **/ -static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, +static int ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, u16 offset, u16 *data) { struct ixgbe_eeprom_info *eeprom = &hw->eeprom; @@ -2006,11 +2009,11 @@ static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, * full pipeline reset. Note - We must hold the SW/FW semaphore before writing * to AUTOC, so this function assumes the semaphore is held. **/ -static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw) +static int ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw) { - s32 ret_val; - u32 anlp1_reg = 0; u32 i, autoc_reg, autoc2_reg; + u32 anlp1_reg = 0; + int ret_val; /* Enable link if disabled in NVM */ autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2); @@ -2061,12 +2064,12 @@ reset_pipeline_out: * Performs byte read operation to SFP module's EEPROM over I2C interface at * a specified device address. **/ -static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, +static int ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) { - u32 esdp; - s32 status; s32 timeout = 200; + int status; + u32 esdp; if (hw->phy.qsfp_shared_i2c_bus == true) { /* Acquire I2C bus ownership. */ @@ -2115,12 +2118,12 @@ release_i2c_access: * Performs byte write operation to SFP module's EEPROM over I2C interface at * a specified device address. **/ -static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, +static int ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) { - u32 esdp; - s32 status; s32 timeout = 200; + int status; + u32 esdp; if (hw->phy.qsfp_shared_i2c_bus == true) { /* Acquire I2C bus ownership. */ |