diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h')
-rw-r--r-- | drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h new file mode 100644 index 0000000000..d4a27c882a --- /dev/null +++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h @@ -0,0 +1,266 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Marvell OcteonTx2 CGX driver + * + * Copyright (C) 2018 Marvell. + * + */ + +#ifndef __CGX_FW_INTF_H__ +#define __CGX_FW_INTF_H__ + +#include <linux/bitops.h> +#include <linux/bitfield.h> + +#define CGX_FIRMWARE_MAJOR_VER 1 +#define CGX_FIRMWARE_MINOR_VER 0 + +#define CGX_EVENT_ACK 1UL + +/* CGX error types. set for cmd response status as CGX_STAT_FAIL */ +enum cgx_error_type { + CGX_ERR_NONE, + CGX_ERR_LMAC_NOT_ENABLED, + CGX_ERR_LMAC_MODE_INVALID, + CGX_ERR_REQUEST_ID_INVALID, + CGX_ERR_PREV_ACK_NOT_CLEAR, + CGX_ERR_PHY_LINK_DOWN, + CGX_ERR_PCS_RESET_FAIL, + CGX_ERR_AN_CPT_FAIL, + CGX_ERR_TX_NOT_IDLE, + CGX_ERR_RX_NOT_IDLE, + CGX_ERR_SPUX_BR_BLKLOCK_FAIL, + CGX_ERR_SPUX_RX_ALIGN_FAIL, + CGX_ERR_SPUX_TX_FAULT, + CGX_ERR_SPUX_RX_FAULT, + CGX_ERR_SPUX_RESET_FAIL, + CGX_ERR_SPUX_AN_RESET_FAIL, + CGX_ERR_SPUX_USX_AN_RESET_FAIL, + CGX_ERR_SMUX_RX_LINK_NOT_OK, + CGX_ERR_PCS_RECV_LINK_FAIL, + CGX_ERR_TRAINING_FAIL, + CGX_ERR_RX_EQU_FAIL, + CGX_ERR_SPUX_BER_FAIL, + CGX_ERR_SPUX_RSFEC_ALGN_FAIL, + CGX_ERR_SPUX_MARKER_LOCK_FAIL, + CGX_ERR_SET_FEC_INVALID, + CGX_ERR_SET_FEC_FAIL, + CGX_ERR_MODULE_INVALID, + CGX_ERR_MODULE_NOT_PRESENT, + CGX_ERR_SPEED_CHANGE_INVALID, +}; + +/* LINK speed types */ +enum cgx_link_speed { + CGX_LINK_NONE, + CGX_LINK_10M, + CGX_LINK_100M, + CGX_LINK_1G, + CGX_LINK_2HG, + CGX_LINK_5G, + CGX_LINK_10G, + CGX_LINK_20G, + CGX_LINK_25G, + CGX_LINK_40G, + CGX_LINK_50G, + CGX_LINK_80G, + CGX_LINK_100G, + CGX_LINK_SPEED_MAX, +}; + +enum CGX_MODE_ { + CGX_MODE_SGMII, + CGX_MODE_1000_BASEX, + CGX_MODE_QSGMII, + CGX_MODE_10G_C2C, + CGX_MODE_10G_C2M, + CGX_MODE_10G_KR, + CGX_MODE_20G_C2C, + CGX_MODE_25G_C2C, + CGX_MODE_25G_C2M, + CGX_MODE_25G_2_C2C, + CGX_MODE_25G_CR, + CGX_MODE_25G_KR, + CGX_MODE_40G_C2C, + CGX_MODE_40G_C2M, + CGX_MODE_40G_CR4, + CGX_MODE_40G_KR4, + CGX_MODE_40GAUI_C2C, + CGX_MODE_50G_C2C, + CGX_MODE_50G_C2M, + CGX_MODE_50G_4_C2C, + CGX_MODE_50G_CR, + CGX_MODE_50G_KR, + CGX_MODE_80GAUI_C2C, + CGX_MODE_100G_C2C, + CGX_MODE_100G_C2M, + CGX_MODE_100G_CR4, + CGX_MODE_100G_KR4, + CGX_MODE_MAX /* = 29 */ +}; +/* REQUEST ID types. Input to firmware */ +enum cgx_cmd_id { + CGX_CMD_NONE, + CGX_CMD_GET_FW_VER, + CGX_CMD_GET_MAC_ADDR, + CGX_CMD_SET_MTU, + CGX_CMD_GET_LINK_STS, /* optional to user */ + CGX_CMD_LINK_BRING_UP, + CGX_CMD_LINK_BRING_DOWN, + CGX_CMD_INTERNAL_LBK, + CGX_CMD_EXTERNAL_LBK, + CGX_CMD_HIGIG, + CGX_CMD_LINK_STAT_CHANGE, + CGX_CMD_MODE_CHANGE, /* hot plug support */ + CGX_CMD_INTF_SHUTDOWN, + CGX_CMD_GET_MKEX_PRFL_SIZE, + CGX_CMD_GET_MKEX_PRFL_ADDR, + CGX_CMD_GET_FWD_BASE, /* get base address of shared FW data */ + CGX_CMD_GET_LINK_MODES, /* Supported Link Modes */ + CGX_CMD_SET_LINK_MODE, + CGX_CMD_GET_SUPPORTED_FEC, + CGX_CMD_SET_FEC, + CGX_CMD_GET_AN, + CGX_CMD_SET_AN, + CGX_CMD_GET_ADV_LINK_MODES, + CGX_CMD_GET_ADV_FEC, + CGX_CMD_GET_PHY_MOD_TYPE, /* line-side modulation type: NRZ or PAM4 */ + CGX_CMD_SET_PHY_MOD_TYPE, + CGX_CMD_PRBS, + CGX_CMD_DISPLAY_EYE, + CGX_CMD_GET_PHY_FEC_STATS, +}; + +/* async event ids */ +enum cgx_evt_id { + CGX_EVT_NONE, + CGX_EVT_LINK_CHANGE, +}; + +/* event types - cause of interrupt */ +enum cgx_evt_type { + CGX_EVT_ASYNC, + CGX_EVT_CMD_RESP +}; + +enum cgx_stat { + CGX_STAT_SUCCESS, + CGX_STAT_FAIL +}; + +enum cgx_cmd_own { + CGX_CMD_OWN_NS, + CGX_CMD_OWN_FIRMWARE, +}; + +/* m - bit mask + * y - value to be written in the bitrange + * x - input value whose bitrange to be modified + */ +#define FIELD_SET(m, y, x) \ + (((x) & ~(m)) | \ + FIELD_PREP((m), (y))) + +/* scratchx(0) CSR used for ATF->non-secure SW communication. + * This acts as the status register + * Provides details on command ack/status, command response, error details + */ +#define EVTREG_ACK BIT_ULL(0) +#define EVTREG_EVT_TYPE BIT_ULL(1) +#define EVTREG_STAT BIT_ULL(2) +#define EVTREG_ID GENMASK_ULL(8, 3) + +/* Response to command IDs with command status as CGX_STAT_FAIL + * + * Not applicable for commands : + * CGX_CMD_LINK_BRING_UP/DOWN/CGX_EVT_LINK_CHANGE + */ +#define EVTREG_ERRTYPE GENMASK_ULL(18, 9) + +/* Response to cmd ID as CGX_CMD_GET_FW_VER with cmd status as + * CGX_STAT_SUCCESS + */ +#define RESP_MAJOR_VER GENMASK_ULL(12, 9) +#define RESP_MINOR_VER GENMASK_ULL(16, 13) + +/* Response to cmd ID as CGX_CMD_GET_MAC_ADDR with cmd status as + * CGX_STAT_SUCCESS + */ +#define RESP_MAC_ADDR GENMASK_ULL(56, 9) + +/* Response to cmd ID as CGX_CMD_GET_MKEX_PRFL_SIZE with cmd status as + * CGX_STAT_SUCCESS + */ +#define RESP_MKEX_PRFL_SIZE GENMASK_ULL(63, 9) + +/* Response to cmd ID as CGX_CMD_GET_MKEX_PRFL_ADDR with cmd status as + * CGX_STAT_SUCCESS + */ +#define RESP_MKEX_PRFL_ADDR GENMASK_ULL(63, 9) + +/* Response to cmd ID as CGX_CMD_GET_FWD_BASE with cmd status as + * CGX_STAT_SUCCESS + */ +#define RESP_FWD_BASE GENMASK_ULL(56, 9) +#define RESP_LINKSTAT_LMAC_TYPE GENMASK_ULL(35, 28) + +/* Response to cmd ID - CGX_CMD_LINK_BRING_UP/DOWN, event ID CGX_EVT_LINK_CHANGE + * status can be either CGX_STAT_FAIL or CGX_STAT_SUCCESS + * + * In case of CGX_STAT_FAIL, it indicates CGX configuration failed + * when processing link up/down/change command. + * Both err_type and current link status will be updated + * + * In case of CGX_STAT_SUCCESS, err_type will be CGX_ERR_NONE and current + * link status will be updated + */ +struct cgx_lnk_sts { + uint64_t reserved1:9; + uint64_t link_up:1; + uint64_t full_duplex:1; + uint64_t speed:4; /* cgx_link_speed */ + uint64_t err_type:10; + uint64_t an:1; /* AN supported or not */ + uint64_t fec:2; /* FEC type if enabled, if not 0 */ + uint64_t port:8; + uint64_t reserved2:28; +}; + +#define RESP_LINKSTAT_UP GENMASK_ULL(9, 9) +#define RESP_LINKSTAT_FDUPLEX GENMASK_ULL(10, 10) +#define RESP_LINKSTAT_SPEED GENMASK_ULL(14, 11) +#define RESP_LINKSTAT_ERRTYPE GENMASK_ULL(24, 15) +#define RESP_LINKSTAT_AN GENMASK_ULL(25, 25) +#define RESP_LINKSTAT_FEC GENMASK_ULL(27, 26) +#define RESP_LINKSTAT_PORT GENMASK_ULL(35, 28) + +/* scratchx(1) CSR used for non-secure SW->ATF communication + * This CSR acts as a command register + */ +#define CMDREG_OWN BIT_ULL(0) +#define CMDREG_ID GENMASK_ULL(7, 2) + +/* Any command using enable/disable as an argument need + * to set this bitfield. + * Ex: Loopback, HiGig... + */ +#define CMDREG_ENABLE BIT_ULL(8) + +/* command argument to be passed for cmd ID - CGX_CMD_SET_MTU */ +#define CMDMTU_SIZE GENMASK_ULL(23, 8) + +/* command argument to be passed for cmd ID - CGX_CMD_LINK_CHANGE */ +#define CMDLINKCHANGE_LINKUP BIT_ULL(8) +#define CMDLINKCHANGE_FULLDPLX BIT_ULL(9) +#define CMDLINKCHANGE_SPEED GENMASK_ULL(13, 10) + +#define CMDSETFEC GENMASK_ULL(9, 8) +/* command argument to be passed for cmd ID - CGX_CMD_MODE_CHANGE */ +#define CMDMODECHANGE_SPEED GENMASK_ULL(11, 8) +#define CMDMODECHANGE_DUPLEX GENMASK_ULL(12, 12) +#define CMDMODECHANGE_AN GENMASK_ULL(13, 13) +#define CMDMODECHANGE_PORT GENMASK_ULL(21, 14) +#define CMDMODECHANGE_FLAGS GENMASK_ULL(63, 22) + +/* LINK_BRING_UP command timeout */ +#define LINKCFG_TIMEOUT GENMASK_ULL(21, 8) +#endif /* __CGX_FW_INTF_H__ */ |