summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/sfc/falcon/qt202x_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/sfc/falcon/qt202x_phy.c')
-rw-r--r--drivers/net/ethernet/sfc/falcon/qt202x_phy.c493
1 files changed, 493 insertions, 0 deletions
diff --git a/drivers/net/ethernet/sfc/falcon/qt202x_phy.c b/drivers/net/ethernet/sfc/falcon/qt202x_phy.c
new file mode 100644
index 0000000000..21af67e422
--- /dev/null
+++ b/drivers/net/ethernet/sfc/falcon/qt202x_phy.c
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/****************************************************************************
+ * Driver for Solarflare network controllers and boards
+ * Copyright 2006-2012 Solarflare Communications Inc.
+ */
+/*
+ * Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details
+ */
+
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include "efx.h"
+#include "mdio_10g.h"
+#include "phy.h"
+#include "nic.h"
+
+#define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS | \
+ MDIO_DEVS_PMAPMD | \
+ MDIO_DEVS_PHYXS)
+
+#define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) | \
+ (1 << LOOPBACK_PMAPMD) | \
+ (1 << LOOPBACK_PHYXS_WS))
+
+/****************************************************************************/
+/* Quake-specific MDIO registers */
+#define MDIO_QUAKE_LED0_REG (0xD006)
+
+/* QT2025C only */
+#define PCS_FW_HEARTBEAT_REG 0xd7ee
+#define PCS_FW_HEARTB_LBN 0
+#define PCS_FW_HEARTB_WIDTH 8
+#define PCS_FW_PRODUCT_CODE_1 0xd7f0
+#define PCS_FW_VERSION_1 0xd7f3
+#define PCS_FW_BUILD_1 0xd7f6
+#define PCS_UC8051_STATUS_REG 0xd7fd
+#define PCS_UC_STATUS_LBN 0
+#define PCS_UC_STATUS_WIDTH 8
+#define PCS_UC_STATUS_FW_SAVE 0x20
+#define PMA_PMD_MODE_REG 0xc301
+#define PMA_PMD_RXIN_SEL_LBN 6
+#define PMA_PMD_FTX_CTRL2_REG 0xc309
+#define PMA_PMD_FTX_STATIC_LBN 13
+#define PMA_PMD_VEND1_REG 0xc001
+#define PMA_PMD_VEND1_LBTXD_LBN 15
+#define PCS_VEND1_REG 0xc000
+#define PCS_VEND1_LBTXD_LBN 5
+
+void falcon_qt202x_set_led(struct ef4_nic *p, int led, int mode)
+{
+ int addr = MDIO_QUAKE_LED0_REG + led;
+ ef4_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
+}
+
+struct qt202x_phy_data {
+ enum ef4_phy_mode phy_mode;
+ bool bug17190_in_bad_state;
+ unsigned long bug17190_timer;
+ u32 firmware_ver;
+};
+
+#define QT2022C2_MAX_RESET_TIME 500
+#define QT2022C2_RESET_WAIT 10
+
+#define QT2025C_MAX_HEARTB_TIME (5 * HZ)
+#define QT2025C_HEARTB_WAIT 100
+#define QT2025C_MAX_FWSTART_TIME (25 * HZ / 10)
+#define QT2025C_FWSTART_WAIT 100
+
+#define BUG17190_INTERVAL (2 * HZ)
+
+static int qt2025c_wait_heartbeat(struct ef4_nic *efx)
+{
+ unsigned long timeout = jiffies + QT2025C_MAX_HEARTB_TIME;
+ int reg, old_counter = 0;
+
+ /* Wait for firmware heartbeat to start */
+ for (;;) {
+ int counter;
+ reg = ef4_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG);
+ if (reg < 0)
+ return reg;
+ counter = ((reg >> PCS_FW_HEARTB_LBN) &
+ ((1 << PCS_FW_HEARTB_WIDTH) - 1));
+ if (old_counter == 0)
+ old_counter = counter;
+ else if (counter != old_counter)
+ break;
+ if (time_after(jiffies, timeout)) {
+ /* Some cables have EEPROMs that conflict with the
+ * PHY's on-board EEPROM so it cannot load firmware */
+ netif_err(efx, hw, efx->net_dev,
+ "If an SFP+ direct attach cable is"
+ " connected, please check that it complies"
+ " with the SFP+ specification\n");
+ return -ETIMEDOUT;
+ }
+ msleep(QT2025C_HEARTB_WAIT);
+ }
+
+ return 0;
+}
+
+static int qt2025c_wait_fw_status_good(struct ef4_nic *efx)
+{
+ unsigned long timeout = jiffies + QT2025C_MAX_FWSTART_TIME;
+ int reg;
+
+ /* Wait for firmware status to look good */
+ for (;;) {
+ reg = ef4_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
+ if (reg < 0)
+ return reg;
+ if ((reg &
+ ((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >=
+ PCS_UC_STATUS_FW_SAVE)
+ break;
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+ msleep(QT2025C_FWSTART_WAIT);
+ }
+
+ return 0;
+}
+
+static void qt2025c_restart_firmware(struct ef4_nic *efx)
+{
+ /* Restart microcontroller execution of firmware from RAM */
+ ef4_mdio_write(efx, 3, 0xe854, 0x00c0);
+ ef4_mdio_write(efx, 3, 0xe854, 0x0040);
+ msleep(50);
+}
+
+static int qt2025c_wait_reset(struct ef4_nic *efx)
+{
+ int rc;
+
+ rc = qt2025c_wait_heartbeat(efx);
+ if (rc != 0)
+ return rc;
+
+ rc = qt2025c_wait_fw_status_good(efx);
+ if (rc == -ETIMEDOUT) {
+ /* Bug 17689: occasionally heartbeat starts but firmware status
+ * code never progresses beyond 0x00. Try again, once, after
+ * restarting execution of the firmware image. */
+ netif_dbg(efx, hw, efx->net_dev,
+ "bashing QT2025C microcontroller\n");
+ qt2025c_restart_firmware(efx);
+ rc = qt2025c_wait_heartbeat(efx);
+ if (rc != 0)
+ return rc;
+ rc = qt2025c_wait_fw_status_good(efx);
+ }
+
+ return rc;
+}
+
+static void qt2025c_firmware_id(struct ef4_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+ u8 firmware_id[9];
+ size_t i;
+
+ for (i = 0; i < sizeof(firmware_id); i++)
+ firmware_id[i] = ef4_mdio_read(efx, MDIO_MMD_PCS,
+ PCS_FW_PRODUCT_CODE_1 + i);
+ netif_info(efx, probe, efx->net_dev,
+ "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n",
+ (firmware_id[0] << 8) | firmware_id[1], firmware_id[2],
+ firmware_id[3] >> 4, firmware_id[3] & 0xf,
+ firmware_id[4], firmware_id[5],
+ firmware_id[6], firmware_id[7], firmware_id[8]);
+ phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) |
+ ((firmware_id[3] & 0x0f) << 16) |
+ (firmware_id[4] << 8) | firmware_id[5];
+}
+
+static void qt2025c_bug17190_workaround(struct ef4_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+
+ /* The PHY can get stuck in a state where it reports PHY_XS and PMA/PMD
+ * layers up, but PCS down (no block_lock). If we notice this state
+ * persisting for a couple of seconds, we switch PMA/PMD loopback
+ * briefly on and then off again, which is normally sufficient to
+ * recover it.
+ */
+ if (efx->link_state.up ||
+ !ef4_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PHYXS)) {
+ phy_data->bug17190_in_bad_state = false;
+ return;
+ }
+
+ if (!phy_data->bug17190_in_bad_state) {
+ phy_data->bug17190_in_bad_state = true;
+ phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
+ return;
+ }
+
+ if (time_after_eq(jiffies, phy_data->bug17190_timer)) {
+ netif_dbg(efx, hw, efx->net_dev, "bashing QT2025C PMA/PMD\n");
+ ef4_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+ MDIO_PMA_CTRL1_LOOPBACK, true);
+ msleep(100);
+ ef4_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+ MDIO_PMA_CTRL1_LOOPBACK, false);
+ phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
+ }
+}
+
+static int qt2025c_select_phy_mode(struct ef4_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+ struct falcon_board *board = falcon_board(efx);
+ int reg, rc, i;
+ uint16_t phy_op_mode;
+
+ /* Only 2.0.1.0+ PHY firmware supports the more optimal SFP+
+ * Self-Configure mode. Don't attempt any switching if we encounter
+ * older firmware. */
+ if (phy_data->firmware_ver < 0x02000100)
+ return 0;
+
+ /* In general we will get optimal behaviour in "SFP+ Self-Configure"
+ * mode; however, that powers down most of the PHY when no module is
+ * present, so we must use a different mode (any fixed mode will do)
+ * to be sure that loopbacks will work. */
+ phy_op_mode = (efx->loopback_mode == LOOPBACK_NONE) ? 0x0038 : 0x0020;
+
+ /* Only change mode if really necessary */
+ reg = ef4_mdio_read(efx, 1, 0xc319);
+ if ((reg & 0x0038) == phy_op_mode)
+ return 0;
+ netif_dbg(efx, hw, efx->net_dev, "Switching PHY to mode 0x%04x\n",
+ phy_op_mode);
+
+ /* This sequence replicates the register writes configured in the boot
+ * EEPROM (including the differences between board revisions), except
+ * that the operating mode is changed, and the PHY is prevented from
+ * unnecessarily reloading the main firmware image again. */
+ ef4_mdio_write(efx, 1, 0xc300, 0x0000);
+ /* (Note: this portion of the boot EEPROM sequence, which bit-bashes 9
+ * STOPs onto the firmware/module I2C bus to reset it, varies across
+ * board revisions, as the bus is connected to different GPIO/LED
+ * outputs on the PHY.) */
+ if (board->major == 0 && board->minor < 2) {
+ ef4_mdio_write(efx, 1, 0xc303, 0x4498);
+ for (i = 0; i < 9; i++) {
+ ef4_mdio_write(efx, 1, 0xc303, 0x4488);
+ ef4_mdio_write(efx, 1, 0xc303, 0x4480);
+ ef4_mdio_write(efx, 1, 0xc303, 0x4490);
+ ef4_mdio_write(efx, 1, 0xc303, 0x4498);
+ }
+ } else {
+ ef4_mdio_write(efx, 1, 0xc303, 0x0920);
+ ef4_mdio_write(efx, 1, 0xd008, 0x0004);
+ for (i = 0; i < 9; i++) {
+ ef4_mdio_write(efx, 1, 0xc303, 0x0900);
+ ef4_mdio_write(efx, 1, 0xd008, 0x0005);
+ ef4_mdio_write(efx, 1, 0xc303, 0x0920);
+ ef4_mdio_write(efx, 1, 0xd008, 0x0004);
+ }
+ ef4_mdio_write(efx, 1, 0xc303, 0x4900);
+ }
+ ef4_mdio_write(efx, 1, 0xc303, 0x4900);
+ ef4_mdio_write(efx, 1, 0xc302, 0x0004);
+ ef4_mdio_write(efx, 1, 0xc316, 0x0013);
+ ef4_mdio_write(efx, 1, 0xc318, 0x0054);
+ ef4_mdio_write(efx, 1, 0xc319, phy_op_mode);
+ ef4_mdio_write(efx, 1, 0xc31a, 0x0098);
+ ef4_mdio_write(efx, 3, 0x0026, 0x0e00);
+ ef4_mdio_write(efx, 3, 0x0027, 0x0013);
+ ef4_mdio_write(efx, 3, 0x0028, 0xa528);
+ ef4_mdio_write(efx, 1, 0xd006, 0x000a);
+ ef4_mdio_write(efx, 1, 0xd007, 0x0009);
+ ef4_mdio_write(efx, 1, 0xd008, 0x0004);
+ /* This additional write is not present in the boot EEPROM. It
+ * prevents the PHY's internal boot ROM doing another pointless (and
+ * slow) reload of the firmware image (the microcontroller's code
+ * memory is not affected by the microcontroller reset). */
+ ef4_mdio_write(efx, 1, 0xc317, 0x00ff);
+ /* PMA/PMD loopback sets RXIN to inverse polarity and the firmware
+ * restart doesn't reset it. We need to do that ourselves. */
+ ef4_mdio_set_flag(efx, 1, PMA_PMD_MODE_REG,
+ 1 << PMA_PMD_RXIN_SEL_LBN, false);
+ ef4_mdio_write(efx, 1, 0xc300, 0x0002);
+ msleep(20);
+
+ /* Restart microcontroller execution of firmware from RAM */
+ qt2025c_restart_firmware(efx);
+
+ /* Wait for the microcontroller to be ready again */
+ rc = qt2025c_wait_reset(efx);
+ if (rc < 0) {
+ netif_err(efx, hw, efx->net_dev,
+ "PHY microcontroller reset during mode switch "
+ "timed out\n");
+ return rc;
+ }
+
+ return 0;
+}
+
+static int qt202x_reset_phy(struct ef4_nic *efx)
+{
+ int rc;
+
+ if (efx->phy_type == PHY_TYPE_QT2025C) {
+ /* Wait for the reset triggered by falcon_reset_hw()
+ * to complete */
+ rc = qt2025c_wait_reset(efx);
+ if (rc < 0)
+ goto fail;
+ } else {
+ /* Reset the PHYXS MMD. This is documented as doing
+ * a complete soft reset. */
+ rc = ef4_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
+ QT2022C2_MAX_RESET_TIME /
+ QT2022C2_RESET_WAIT,
+ QT2022C2_RESET_WAIT);
+ if (rc < 0)
+ goto fail;
+ }
+
+ /* Wait 250ms for the PHY to complete bootup */
+ msleep(250);
+
+ falcon_board(efx)->type->init_phy(efx);
+
+ return 0;
+
+ fail:
+ netif_err(efx, hw, efx->net_dev, "PHY reset timed out\n");
+ return rc;
+}
+
+static int qt202x_phy_probe(struct ef4_nic *efx)
+{
+ struct qt202x_phy_data *phy_data;
+
+ phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
+ efx->phy_data = phy_data;
+ phy_data->phy_mode = efx->phy_mode;
+ phy_data->bug17190_in_bad_state = false;
+ phy_data->bug17190_timer = 0;
+
+ efx->mdio.mmds = QT202X_REQUIRED_DEVS;
+ efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+ efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
+ return 0;
+}
+
+static int qt202x_phy_init(struct ef4_nic *efx)
+{
+ u32 devid;
+ int rc;
+
+ rc = qt202x_reset_phy(efx);
+ if (rc) {
+ netif_err(efx, probe, efx->net_dev, "PHY init failed\n");
+ return rc;
+ }
+
+ devid = ef4_mdio_read_id(efx, MDIO_MMD_PHYXS);
+ netif_info(efx, probe, efx->net_dev,
+ "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
+ devid, ef4_mdio_id_oui(devid), ef4_mdio_id_model(devid),
+ ef4_mdio_id_rev(devid));
+
+ if (efx->phy_type == PHY_TYPE_QT2025C)
+ qt2025c_firmware_id(efx);
+
+ return 0;
+}
+
+static int qt202x_link_ok(struct ef4_nic *efx)
+{
+ return ef4_mdio_links_ok(efx, QT202X_REQUIRED_DEVS);
+}
+
+static bool qt202x_phy_poll(struct ef4_nic *efx)
+{
+ bool was_up = efx->link_state.up;
+
+ efx->link_state.up = qt202x_link_ok(efx);
+ efx->link_state.speed = 10000;
+ efx->link_state.fd = true;
+ efx->link_state.fc = efx->wanted_fc;
+
+ if (efx->phy_type == PHY_TYPE_QT2025C)
+ qt2025c_bug17190_workaround(efx);
+
+ return efx->link_state.up != was_up;
+}
+
+static int qt202x_phy_reconfigure(struct ef4_nic *efx)
+{
+ struct qt202x_phy_data *phy_data = efx->phy_data;
+
+ if (efx->phy_type == PHY_TYPE_QT2025C) {
+ int rc = qt2025c_select_phy_mode(efx);
+ if (rc)
+ return rc;
+
+ /* There are several different register bits which can
+ * disable TX (and save power) on direct-attach cables
+ * or optical transceivers, varying somewhat between
+ * firmware versions. Only 'static mode' appears to
+ * cover everything. */
+ mdio_set_flag(
+ &efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD,
+ PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN,
+ efx->phy_mode & PHY_MODE_TX_DISABLED ||
+ efx->phy_mode & PHY_MODE_LOW_POWER ||
+ efx->loopback_mode == LOOPBACK_PCS ||
+ efx->loopback_mode == LOOPBACK_PMAPMD);
+ } else {
+ /* Reset the PHY when moving from tx off to tx on */
+ if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
+ (phy_data->phy_mode & PHY_MODE_TX_DISABLED))
+ qt202x_reset_phy(efx);
+
+ ef4_mdio_transmit_disable(efx);
+ }
+
+ ef4_mdio_phy_reconfigure(efx);
+
+ phy_data->phy_mode = efx->phy_mode;
+
+ return 0;
+}
+
+static void qt202x_phy_get_link_ksettings(struct ef4_nic *efx,
+ struct ethtool_link_ksettings *cmd)
+{
+ mdio45_ethtool_ksettings_get(&efx->mdio, cmd);
+}
+
+static void qt202x_phy_remove(struct ef4_nic *efx)
+{
+ /* Free the context block */
+ kfree(efx->phy_data);
+ efx->phy_data = NULL;
+}
+
+static int qt202x_phy_get_module_info(struct ef4_nic *efx,
+ struct ethtool_modinfo *modinfo)
+{
+ modinfo->type = ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+ return 0;
+}
+
+static int qt202x_phy_get_module_eeprom(struct ef4_nic *efx,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ int mmd, reg_base, rc, i;
+
+ if (efx->phy_type == PHY_TYPE_QT2025C) {
+ mmd = MDIO_MMD_PCS;
+ reg_base = 0xd000;
+ } else {
+ mmd = MDIO_MMD_PMAPMD;
+ reg_base = 0x8007;
+ }
+
+ for (i = 0; i < ee->len; i++) {
+ rc = ef4_mdio_read(efx, mmd, reg_base + ee->offset + i);
+ if (rc < 0)
+ return rc;
+ data[i] = rc;
+ }
+
+ return 0;
+}
+
+const struct ef4_phy_operations falcon_qt202x_phy_ops = {
+ .probe = qt202x_phy_probe,
+ .init = qt202x_phy_init,
+ .reconfigure = qt202x_phy_reconfigure,
+ .poll = qt202x_phy_poll,
+ .fini = ef4_port_dummy_op_void,
+ .remove = qt202x_phy_remove,
+ .get_link_ksettings = qt202x_phy_get_link_ksettings,
+ .set_link_ksettings = ef4_mdio_set_link_ksettings,
+ .test_alive = ef4_mdio_test_alive,
+ .get_module_eeprom = qt202x_phy_get_module_eeprom,
+ .get_module_info = qt202x_phy_get_module_info,
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 05:59:48 +0000