diff options
Diffstat (limited to 'drivers/net/ethernet/wangxun/txgbe')
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c | 110 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/txgbe_main.c | 10 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c | 56 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/txgbe_type.h | 6 |
6 files changed, 11 insertions, 177 deletions
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c index 859da11258..3f336a088e 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c @@ -39,6 +39,11 @@ static const struct ethtool_ops txgbe_ethtool_ops = { .get_link = ethtool_op_get_link, .get_link_ksettings = txgbe_get_link_ksettings, .set_link_ksettings = txgbe_set_link_ksettings, + .get_sset_count = wx_get_sset_count, + .get_strings = wx_get_strings, + .get_ethtool_stats = wx_get_ethtool_stats, + .get_eth_mac_stats = wx_get_mac_stats, + .get_pause_stats = wx_get_pause_stats, }; void txgbe_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c index 3727452502..d6b2b3c781 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c @@ -71,114 +71,6 @@ static void txgbe_init_thermal_sensor_thresh(struct wx *wx) } /** - * txgbe_read_pba_string - Reads part number string from EEPROM - * @wx: pointer to hardware structure - * @pba_num: stores the part number string from the EEPROM - * @pba_num_size: part number string buffer length - * - * Reads the part number string from the EEPROM. - **/ -int txgbe_read_pba_string(struct wx *wx, u8 *pba_num, u32 pba_num_size) -{ - u16 pba_ptr, offset, length, data; - int ret_val; - - if (!pba_num) { - wx_err(wx, "PBA string buffer was null\n"); - return -EINVAL; - } - - ret_val = wx_read_ee_hostif(wx, - wx->eeprom.sw_region_offset + TXGBE_PBANUM0_PTR, - &data); - if (ret_val != 0) { - wx_err(wx, "NVM Read Error\n"); - return ret_val; - } - - ret_val = wx_read_ee_hostif(wx, - wx->eeprom.sw_region_offset + TXGBE_PBANUM1_PTR, - &pba_ptr); - if (ret_val != 0) { - wx_err(wx, "NVM Read Error\n"); - return ret_val; - } - - /* if data is not ptr guard the PBA must be in legacy format which - * means pba_ptr is actually our second data word for the PBA number - * and we can decode it into an ascii string - */ - if (data != TXGBE_PBANUM_PTR_GUARD) { - wx_err(wx, "NVM PBA number is not stored as string\n"); - - /* we will need 11 characters to store the PBA */ - if (pba_num_size < 11) { - wx_err(wx, "PBA string buffer too small\n"); - return -ENOMEM; - } - - /* extract hex string from data and pba_ptr */ - pba_num[0] = (data >> 12) & 0xF; - pba_num[1] = (data >> 8) & 0xF; - pba_num[2] = (data >> 4) & 0xF; - pba_num[3] = data & 0xF; - pba_num[4] = (pba_ptr >> 12) & 0xF; - pba_num[5] = (pba_ptr >> 8) & 0xF; - pba_num[6] = '-'; - pba_num[7] = 0; - pba_num[8] = (pba_ptr >> 4) & 0xF; - pba_num[9] = pba_ptr & 0xF; - - /* put a null character on the end of our string */ - pba_num[10] = '\0'; - - /* switch all the data but the '-' to hex char */ - for (offset = 0; offset < 10; offset++) { - if (pba_num[offset] < 0xA) - pba_num[offset] += '0'; - else if (pba_num[offset] < 0x10) - pba_num[offset] += 'A' - 0xA; - } - - return 0; - } - - ret_val = wx_read_ee_hostif(wx, pba_ptr, &length); - if (ret_val != 0) { - wx_err(wx, "NVM Read Error\n"); - return ret_val; - } - - if (length == 0xFFFF || length == 0) { - wx_err(wx, "NVM PBA number section invalid length\n"); - return -EINVAL; - } - - /* check if pba_num buffer is big enough */ - if (pba_num_size < (((u32)length * 2) - 1)) { - wx_err(wx, "PBA string buffer too small\n"); - return -ENOMEM; - } - - /* trim pba length from start of string */ - pba_ptr++; - length--; - - for (offset = 0; offset < length; offset++) { - ret_val = wx_read_ee_hostif(wx, pba_ptr + offset, &data); - if (ret_val != 0) { - wx_err(wx, "NVM Read Error\n"); - return ret_val; - } - pba_num[offset * 2] = (u8)(data >> 8); - pba_num[(offset * 2) + 1] = (u8)(data & 0xFF); - } - pba_num[offset * 2] = '\0'; - - return 0; -} - -/** * txgbe_calc_eeprom_checksum - Calculates and returns the checksum * @wx: pointer to hardware structure * @checksum: pointer to cheksum @@ -306,6 +198,8 @@ int txgbe_reset_hw(struct wx *wx) txgbe_reset_misc(wx); + wx_clear_hw_cntrs(wx); + /* Store the permanent mac address */ wx_get_mac_addr(wx, wx->mac.perm_addr); diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h index abc729eb18..1f3ecf60e3 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h @@ -6,7 +6,6 @@ int txgbe_disable_sec_tx_path(struct wx *wx); void txgbe_enable_sec_tx_path(struct wx *wx); -int txgbe_read_pba_string(struct wx *wx, u8 *pba_num, u32 pba_num_size); int txgbe_validate_eeprom_checksum(struct wx *wx, u16 *checksum_val); int txgbe_reset_hw(struct wx *wx); diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c index d60c26ba0b..526250102d 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -286,6 +286,8 @@ static void txgbe_disable_device(struct wx *wx) /* Disable the Tx DMA engine */ wr32m(wx, WX_TDM_CTL, WX_TDM_CTL_TE, 0); + + wx_update_stats(wx); } static void txgbe_down(struct wx *wx) @@ -536,7 +538,6 @@ static int txgbe_probe(struct pci_dev *pdev, u16 eeprom_verh = 0, eeprom_verl = 0, offset = 0; u16 eeprom_cfg_blkh = 0, eeprom_cfg_blkl = 0; u16 build = 0, major = 0, patch = 0; - u8 part_str[TXGBE_PBANUM_LENGTH]; u32 etrack_id = 0; err = pci_enable_device_mem(pdev); @@ -734,13 +735,6 @@ static int txgbe_probe(struct pci_dev *pdev, else dev_warn(&pdev->dev, "Failed to enumerate PF devices.\n"); - /* First try to read PBA as a string */ - err = txgbe_read_pba_string(wx, part_str, TXGBE_PBANUM_LENGTH); - if (err) - strncpy(part_str, "Unknown", TXGBE_PBANUM_LENGTH); - - netif_info(wx, probe, netdev, "%pM\n", netdev->dev_addr); - return 0; err_remove_phy: diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c index 4159c84035..b6c06adb86 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c @@ -647,58 +647,6 @@ static int txgbe_sfp_register(struct txgbe *txgbe) return 0; } -static int txgbe_phy_read(struct mii_bus *bus, int phy_addr, - int devnum, int regnum) -{ - struct wx *wx = bus->priv; - u32 val, command; - int ret; - - /* setup and write the address cycle command */ - command = WX_MSCA_RA(regnum) | - WX_MSCA_PA(phy_addr) | - WX_MSCA_DA(devnum); - wr32(wx, WX_MSCA, command); - - command = WX_MSCC_CMD(WX_MSCA_CMD_READ) | WX_MSCC_BUSY; - wr32(wx, WX_MSCC, command); - - /* wait to complete */ - ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000, - 100000, false, wx, WX_MSCC); - if (ret) { - wx_err(wx, "Mdio read c45 command did not complete.\n"); - return ret; - } - - return (u16)rd32(wx, WX_MSCC); -} - -static int txgbe_phy_write(struct mii_bus *bus, int phy_addr, - int devnum, int regnum, u16 value) -{ - struct wx *wx = bus->priv; - int ret, command; - u16 val; - - /* setup and write the address cycle command */ - command = WX_MSCA_RA(regnum) | - WX_MSCA_PA(phy_addr) | - WX_MSCA_DA(devnum); - wr32(wx, WX_MSCA, command); - - command = value | WX_MSCC_CMD(WX_MSCA_CMD_WRITE) | WX_MSCC_BUSY; - wr32(wx, WX_MSCC, command); - - /* wait to complete */ - ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000, - 100000, false, wx, WX_MSCC); - if (ret) - wx_err(wx, "Mdio write c45 command did not complete.\n"); - - return ret; -} - static int txgbe_ext_phy_init(struct txgbe *txgbe) { struct phy_device *phydev; @@ -715,8 +663,8 @@ static int txgbe_ext_phy_init(struct txgbe *txgbe) return -ENOMEM; mii_bus->name = "txgbe_mii_bus"; - mii_bus->read_c45 = &txgbe_phy_read; - mii_bus->write_c45 = &txgbe_phy_write; + mii_bus->read_c45 = &wx_phy_read_reg_mdi_c45; + mii_bus->write_c45 = &wx_phy_write_reg_mdi_c45; mii_bus->parent = &pdev->dev; mii_bus->phy_mask = GENMASK(31, 1); mii_bus->priv = wx; diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h index 51199c355f..3ba9ce43f3 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h @@ -88,9 +88,6 @@ #define TXGBE_XPCS_IDA_ADDR 0x13000 #define TXGBE_XPCS_IDA_DATA 0x13004 -/* Part Number String Length */ -#define TXGBE_PBANUM_LENGTH 32 - /* Checksum and EEPROM pointers */ #define TXGBE_EEPROM_LAST_WORD 0x800 #define TXGBE_EEPROM_CHECKSUM 0x2F @@ -98,9 +95,6 @@ #define TXGBE_EEPROM_VERSION_L 0x1D #define TXGBE_EEPROM_VERSION_H 0x1E #define TXGBE_ISCSI_BOOT_CONFIG 0x07 -#define TXGBE_PBANUM0_PTR 0x05 -#define TXGBE_PBANUM1_PTR 0x06 -#define TXGBE_PBANUM_PTR_GUARD 0xFAFA #define TXGBE_MAX_MSIX_VECTORS 64 #define TXGBE_MAX_FDIR_INDICES 63 |