summaryrefslogtreecommitdiffstats
path: root/drivers/net/ipa/ipa_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ipa/ipa_main.c')
-rw-r--r--drivers/net/ipa/ipa_main.c1017
1 files changed, 1017 insertions, 0 deletions
diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c
new file mode 100644
index 0000000000..da853353a5
--- /dev/null
+++ b/drivers/net/ipa/ipa_main.c
@@ -0,0 +1,1017 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2018-2023 Linaro Ltd.
+ */
+
+#include <linux/types.h>
+#include <linux/atomic.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/firmware/qcom/qcom_scm.h>
+#include <linux/soc/qcom/mdt_loader.h>
+
+#include "ipa.h"
+#include "ipa_power.h"
+#include "ipa_data.h"
+#include "ipa_endpoint.h"
+#include "ipa_resource.h"
+#include "ipa_cmd.h"
+#include "ipa_reg.h"
+#include "ipa_mem.h"
+#include "ipa_table.h"
+#include "ipa_smp2p.h"
+#include "ipa_modem.h"
+#include "ipa_uc.h"
+#include "ipa_interrupt.h"
+#include "gsi_trans.h"
+#include "ipa_sysfs.h"
+
+/**
+ * DOC: The IP Accelerator
+ *
+ * This driver supports the Qualcomm IP Accelerator (IPA), which is a
+ * networking component found in many Qualcomm SoCs. The IPA is connected
+ * to the application processor (AP), but is also connected (and partially
+ * controlled by) other "execution environments" (EEs), such as a modem.
+ *
+ * The IPA is the conduit between the AP and the modem that carries network
+ * traffic. This driver presents a network interface representing the
+ * connection of the modem to external (e.g. LTE) networks.
+ *
+ * The IPA provides protocol checksum calculation, offloading this work
+ * from the AP. The IPA offers additional functionality, including routing,
+ * filtering, and NAT support, but that more advanced functionality is not
+ * currently supported. Despite that, some resources--including routing
+ * tables and filter tables--are defined in this driver because they must
+ * be initialized even when the advanced hardware features are not used.
+ *
+ * There are two distinct layers that implement the IPA hardware, and this
+ * is reflected in the organization of the driver. The generic software
+ * interface (GSI) is an integral component of the IPA, providing a
+ * well-defined communication layer between the AP subsystem and the IPA
+ * core. The GSI implements a set of "channels" used for communication
+ * between the AP and the IPA.
+ *
+ * The IPA layer uses GSI channels to implement its "endpoints". And while
+ * a GSI channel carries data between the AP and the IPA, a pair of IPA
+ * endpoints is used to carry traffic between two EEs. Specifically, the main
+ * modem network interface is implemented by two pairs of endpoints: a TX
+ * endpoint on the AP coupled with an RX endpoint on the modem; and another
+ * RX endpoint on the AP receiving data from a TX endpoint on the modem.
+ */
+
+/* The name of the GSI firmware file relative to /lib/firmware */
+#define IPA_FW_PATH_DEFAULT "ipa_fws.mdt"
+#define IPA_PAS_ID 15
+
+/* Shift of 19.2 MHz timestamp to achieve lower resolution timestamps */
+#define DPL_TIMESTAMP_SHIFT 14 /* ~1.172 kHz, ~853 usec per tick */
+#define TAG_TIMESTAMP_SHIFT 14
+#define NAT_TIMESTAMP_SHIFT 24 /* ~1.144 Hz, ~874 msec per tick */
+
+/* Divider for 19.2 MHz crystal oscillator clock to get common timer clock */
+#define IPA_XO_CLOCK_DIVIDER 192 /* 1 is subtracted where used */
+
+/**
+ * enum ipa_firmware_loader: How GSI firmware gets loaded
+ *
+ * @IPA_LOADER_DEFER: System not ready; try again later
+ * @IPA_LOADER_SELF: AP loads GSI firmware
+ * @IPA_LOADER_MODEM: Modem loads GSI firmware, signals when done
+ * @IPA_LOADER_SKIP: Neither AP nor modem need to load GSI firmware
+ * @IPA_LOADER_INVALID: GSI firmware loader specification is invalid
+ */
+enum ipa_firmware_loader {
+ IPA_LOADER_DEFER,
+ IPA_LOADER_SELF,
+ IPA_LOADER_MODEM,
+ IPA_LOADER_SKIP,
+ IPA_LOADER_INVALID,
+};
+
+/**
+ * ipa_setup() - Set up IPA hardware
+ * @ipa: IPA pointer
+ *
+ * Perform initialization that requires issuing immediate commands on
+ * the command TX endpoint. If the modem is doing GSI firmware load
+ * and initialization, this function will be called when an SMP2P
+ * interrupt has been signaled by the modem. Otherwise it will be
+ * called from ipa_probe() after GSI firmware has been successfully
+ * loaded, authenticated, and started by Trust Zone.
+ */
+int ipa_setup(struct ipa *ipa)
+{
+ struct ipa_endpoint *exception_endpoint;
+ struct ipa_endpoint *command_endpoint;
+ struct device *dev = &ipa->pdev->dev;
+ int ret;
+
+ ret = gsi_setup(&ipa->gsi);
+ if (ret)
+ return ret;
+
+ ret = ipa_power_setup(ipa);
+ if (ret)
+ goto err_gsi_teardown;
+
+ ipa_endpoint_setup(ipa);
+
+ /* We need to use the AP command TX endpoint to perform other
+ * initialization, so we enable first.
+ */
+ command_endpoint = ipa->name_map[IPA_ENDPOINT_AP_COMMAND_TX];
+ ret = ipa_endpoint_enable_one(command_endpoint);
+ if (ret)
+ goto err_endpoint_teardown;
+
+ ret = ipa_mem_setup(ipa); /* No matching teardown required */
+ if (ret)
+ goto err_command_disable;
+
+ ret = ipa_table_setup(ipa); /* No matching teardown required */
+ if (ret)
+ goto err_command_disable;
+
+ /* Enable the exception handling endpoint, and tell the hardware
+ * to use it by default.
+ */
+ exception_endpoint = ipa->name_map[IPA_ENDPOINT_AP_LAN_RX];
+ ret = ipa_endpoint_enable_one(exception_endpoint);
+ if (ret)
+ goto err_command_disable;
+
+ ipa_endpoint_default_route_set(ipa, exception_endpoint->endpoint_id);
+
+ /* We're all set. Now prepare for communication with the modem */
+ ret = ipa_qmi_setup(ipa);
+ if (ret)
+ goto err_default_route_clear;
+
+ ipa->setup_complete = true;
+
+ dev_info(dev, "IPA driver setup completed successfully\n");
+
+ return 0;
+
+err_default_route_clear:
+ ipa_endpoint_default_route_clear(ipa);
+ ipa_endpoint_disable_one(exception_endpoint);
+err_command_disable:
+ ipa_endpoint_disable_one(command_endpoint);
+err_endpoint_teardown:
+ ipa_endpoint_teardown(ipa);
+ ipa_power_teardown(ipa);
+err_gsi_teardown:
+ gsi_teardown(&ipa->gsi);
+
+ return ret;
+}
+
+/**
+ * ipa_teardown() - Inverse of ipa_setup()
+ * @ipa: IPA pointer
+ */
+static void ipa_teardown(struct ipa *ipa)
+{
+ struct ipa_endpoint *exception_endpoint;
+ struct ipa_endpoint *command_endpoint;
+
+ /* We're going to tear everything down, as if setup never completed */
+ ipa->setup_complete = false;
+
+ ipa_qmi_teardown(ipa);
+ ipa_endpoint_default_route_clear(ipa);
+ exception_endpoint = ipa->name_map[IPA_ENDPOINT_AP_LAN_RX];
+ ipa_endpoint_disable_one(exception_endpoint);
+ command_endpoint = ipa->name_map[IPA_ENDPOINT_AP_COMMAND_TX];
+ ipa_endpoint_disable_one(command_endpoint);
+ ipa_endpoint_teardown(ipa);
+ ipa_power_teardown(ipa);
+ gsi_teardown(&ipa->gsi);
+}
+
+static void
+ipa_hardware_config_bcr(struct ipa *ipa, const struct ipa_data *data)
+{
+ const struct reg *reg;
+ u32 val;
+
+ /* IPA v4.5+ has no backward compatibility register */
+ if (ipa->version >= IPA_VERSION_4_5)
+ return;
+
+ reg = ipa_reg(ipa, IPA_BCR);
+ val = data->backward_compat;
+ iowrite32(val, ipa->reg_virt + reg_offset(reg));
+}
+
+static void ipa_hardware_config_tx(struct ipa *ipa)
+{
+ enum ipa_version version = ipa->version;
+ const struct reg *reg;
+ u32 offset;
+ u32 val;
+
+ if (version <= IPA_VERSION_4_0 || version >= IPA_VERSION_4_5)
+ return;
+
+ /* Disable PA mask to allow HOLB drop */
+ reg = ipa_reg(ipa, IPA_TX_CFG);
+ offset = reg_offset(reg);
+
+ val = ioread32(ipa->reg_virt + offset);
+
+ val &= ~reg_bit(reg, PA_MASK_EN);
+
+ iowrite32(val, ipa->reg_virt + offset);
+}
+
+static void ipa_hardware_config_clkon(struct ipa *ipa)
+{
+ enum ipa_version version = ipa->version;
+ const struct reg *reg;
+ u32 val;
+
+ if (version >= IPA_VERSION_4_5)
+ return;
+
+ if (version < IPA_VERSION_4_0 && version != IPA_VERSION_3_1)
+ return;
+
+ /* Implement some hardware workarounds */
+ reg = ipa_reg(ipa, CLKON_CFG);
+ if (version == IPA_VERSION_3_1) {
+ /* Disable MISC clock gating */
+ val = reg_bit(reg, CLKON_MISC);
+ } else { /* IPA v4.0+ */
+ /* Enable open global clocks in the CLKON configuration */
+ val = reg_bit(reg, CLKON_GLOBAL);
+ val |= reg_bit(reg, GLOBAL_2X_CLK);
+ }
+
+ iowrite32(val, ipa->reg_virt + reg_offset(reg));
+}
+
+/* Configure bus access behavior for IPA components */
+static void ipa_hardware_config_comp(struct ipa *ipa)
+{
+ const struct reg *reg;
+ u32 offset;
+ u32 val;
+
+ /* Nothing to configure prior to IPA v4.0 */
+ if (ipa->version < IPA_VERSION_4_0)
+ return;
+
+ reg = ipa_reg(ipa, COMP_CFG);
+ offset = reg_offset(reg);
+
+ val = ioread32(ipa->reg_virt + offset);
+
+ if (ipa->version == IPA_VERSION_4_0) {
+ val &= ~reg_bit(reg, IPA_QMB_SELECT_CONS_EN);
+ val &= ~reg_bit(reg, IPA_QMB_SELECT_PROD_EN);
+ val &= ~reg_bit(reg, IPA_QMB_SELECT_GLOBAL_EN);
+ } else if (ipa->version < IPA_VERSION_4_5) {
+ val |= reg_bit(reg, GSI_MULTI_AXI_MASTERS_DIS);
+ } else {
+ /* For IPA v4.5+ FULL_FLUSH_WAIT_RS_CLOSURE_EN is 0 */
+ }
+
+ val |= reg_bit(reg, GSI_MULTI_INORDER_RD_DIS);
+ val |= reg_bit(reg, GSI_MULTI_INORDER_WR_DIS);
+
+ iowrite32(val, ipa->reg_virt + offset);
+}
+
+/* Configure DDR and (possibly) PCIe max read/write QSB values */
+static void
+ipa_hardware_config_qsb(struct ipa *ipa, const struct ipa_data *data)
+{
+ const struct ipa_qsb_data *data0;
+ const struct ipa_qsb_data *data1;
+ const struct reg *reg;
+ u32 val;
+
+ /* QMB 0 represents DDR; QMB 1 (if present) represents PCIe */
+ data0 = &data->qsb_data[IPA_QSB_MASTER_DDR];
+ if (data->qsb_count > 1)
+ data1 = &data->qsb_data[IPA_QSB_MASTER_PCIE];
+
+ /* Max outstanding write accesses for QSB masters */
+ reg = ipa_reg(ipa, QSB_MAX_WRITES);
+
+ val = reg_encode(reg, GEN_QMB_0_MAX_WRITES, data0->max_writes);
+ if (data->qsb_count > 1)
+ val |= reg_encode(reg, GEN_QMB_1_MAX_WRITES, data1->max_writes);
+
+ iowrite32(val, ipa->reg_virt + reg_offset(reg));
+
+ /* Max outstanding read accesses for QSB masters */
+ reg = ipa_reg(ipa, QSB_MAX_READS);
+
+ val = reg_encode(reg, GEN_QMB_0_MAX_READS, data0->max_reads);
+ if (ipa->version >= IPA_VERSION_4_0)
+ val |= reg_encode(reg, GEN_QMB_0_MAX_READS_BEATS,
+ data0->max_reads_beats);
+ if (data->qsb_count > 1) {
+ val = reg_encode(reg, GEN_QMB_1_MAX_READS, data1->max_reads);
+ if (ipa->version >= IPA_VERSION_4_0)
+ val |= reg_encode(reg, GEN_QMB_1_MAX_READS_BEATS,
+ data1->max_reads_beats);
+ }
+
+ iowrite32(val, ipa->reg_virt + reg_offset(reg));
+}
+
+/* The internal inactivity timer clock is used for the aggregation timer */
+#define TIMER_FREQUENCY 32000 /* 32 KHz inactivity timer clock */
+
+/* Compute the value to use in the COUNTER_CFG register AGGR_GRANULARITY
+ * field to represent the given number of microseconds. The value is one
+ * less than the number of timer ticks in the requested period. 0 is not
+ * a valid granularity value (so for example @usec must be at least 16 for
+ * a TIMER_FREQUENCY of 32000).
+ */
+static __always_inline u32 ipa_aggr_granularity_val(u32 usec)
+{
+ return DIV_ROUND_CLOSEST(usec * TIMER_FREQUENCY, USEC_PER_SEC) - 1;
+}
+
+/* IPA uses unified Qtime starting at IPA v4.5, implementing various
+ * timestamps and timers independent of the IPA core clock rate. The
+ * Qtimer is based on a 56-bit timestamp incremented at each tick of
+ * a 19.2 MHz SoC crystal oscillator (XO clock).
+ *
+ * For IPA timestamps (tag, NAT, data path logging) a lower resolution
+ * timestamp is achieved by shifting the Qtimer timestamp value right
+ * some number of bits to produce the low-order bits of the coarser
+ * granularity timestamp.
+ *
+ * For timers, a common timer clock is derived from the XO clock using
+ * a divider (we use 192, to produce a 100kHz timer clock). From
+ * this common clock, three "pulse generators" are used to produce
+ * timer ticks at a configurable frequency. IPA timers (such as
+ * those used for aggregation or head-of-line block handling) now
+ * define their period based on one of these pulse generators.
+ */
+static void ipa_qtime_config(struct ipa *ipa)
+{
+ const struct reg *reg;
+ u32 offset;
+ u32 val;
+
+ /* Timer clock divider must be disabled when we change the rate */
+ reg = ipa_reg(ipa, TIMERS_XO_CLK_DIV_CFG);
+ iowrite32(0, ipa->reg_virt + reg_offset(reg));
+
+ reg = ipa_reg(ipa, QTIME_TIMESTAMP_CFG);
+ /* Set DPL time stamp resolution to use Qtime (instead of 1 msec) */
+ val = reg_encode(reg, DPL_TIMESTAMP_LSB, DPL_TIMESTAMP_SHIFT);
+ val |= reg_bit(reg, DPL_TIMESTAMP_SEL);
+ /* Configure tag and NAT Qtime timestamp resolution as well */
+ val = reg_encode(reg, TAG_TIMESTAMP_LSB, TAG_TIMESTAMP_SHIFT);
+ val = reg_encode(reg, NAT_TIMESTAMP_LSB, NAT_TIMESTAMP_SHIFT);
+
+ iowrite32(val, ipa->reg_virt + reg_offset(reg));
+
+ /* Set granularity of pulse generators used for other timers */
+ reg = ipa_reg(ipa, TIMERS_PULSE_GRAN_CFG);
+ val = reg_encode(reg, PULSE_GRAN_0, IPA_GRAN_100_US);
+ val |= reg_encode(reg, PULSE_GRAN_1, IPA_GRAN_1_MS);
+ if (ipa->version >= IPA_VERSION_5_0) {
+ val |= reg_encode(reg, PULSE_GRAN_2, IPA_GRAN_10_MS);
+ val |= reg_encode(reg, PULSE_GRAN_3, IPA_GRAN_10_MS);
+ } else {
+ val |= reg_encode(reg, PULSE_GRAN_2, IPA_GRAN_1_MS);
+ }
+
+ iowrite32(val, ipa->reg_virt + reg_offset(reg));
+
+ /* Actual divider is 1 more than value supplied here */
+ reg = ipa_reg(ipa, TIMERS_XO_CLK_DIV_CFG);
+ offset = reg_offset(reg);
+
+ val = reg_encode(reg, DIV_VALUE, IPA_XO_CLOCK_DIVIDER - 1);
+
+ iowrite32(val, ipa->reg_virt + offset);
+
+ /* Divider value is set; re-enable the common timer clock divider */
+ val |= reg_bit(reg, DIV_ENABLE);
+
+ iowrite32(val, ipa->reg_virt + offset);
+}
+
+/* Before IPA v4.5 timing is controlled by a counter register */
+static void ipa_hardware_config_counter(struct ipa *ipa)
+{
+ u32 granularity = ipa_aggr_granularity_val(IPA_AGGR_GRANULARITY);
+ const struct reg *reg;
+ u32 val;
+
+ reg = ipa_reg(ipa, COUNTER_CFG);
+ /* If defined, EOT_COAL_GRANULARITY is 0 */
+ val = reg_encode(reg, AGGR_GRANULARITY, granularity);
+ iowrite32(val, ipa->reg_virt + reg_offset(reg));
+}
+
+static void ipa_hardware_config_timing(struct ipa *ipa)
+{
+ if (ipa->version < IPA_VERSION_4_5)
+ ipa_hardware_config_counter(ipa);
+ else
+ ipa_qtime_config(ipa);
+}
+
+static void ipa_hardware_config_hashing(struct ipa *ipa)
+{
+ const struct reg *reg;
+
+ /* Other than IPA v4.2, all versions enable "hashing". Starting
+ * with IPA v5.0, the filter and router tables are implemented
+ * differently, but the default configuration enables this feature
+ * (now referred to as "cacheing"), so there's nothing to do here.
+ */
+ if (ipa->version != IPA_VERSION_4_2)
+ return;
+
+ /* IPA v4.2 does not support hashed tables, so disable them */
+ reg = ipa_reg(ipa, FILT_ROUT_HASH_EN);
+
+ /* IPV6_ROUTER_HASH, IPV6_FILTER_HASH, IPV4_ROUTER_HASH,
+ * IPV4_FILTER_HASH are all zero.
+ */
+ iowrite32(0, ipa->reg_virt + reg_offset(reg));
+}
+
+static void ipa_idle_indication_cfg(struct ipa *ipa,
+ u32 enter_idle_debounce_thresh,
+ bool const_non_idle_enable)
+{
+ const struct reg *reg;
+ u32 val;
+
+ if (ipa->version < IPA_VERSION_3_5_1)
+ return;
+
+ reg = ipa_reg(ipa, IDLE_INDICATION_CFG);
+ val = reg_encode(reg, ENTER_IDLE_DEBOUNCE_THRESH,
+ enter_idle_debounce_thresh);
+ if (const_non_idle_enable)
+ val |= reg_bit(reg, CONST_NON_IDLE_ENABLE);
+
+ iowrite32(val, ipa->reg_virt + reg_offset(reg));
+}
+
+/**
+ * ipa_hardware_dcd_config() - Enable dynamic clock division on IPA
+ * @ipa: IPA pointer
+ *
+ * Configures when the IPA signals it is idle to the global clock
+ * controller, which can respond by scaling down the clock to save
+ * power.
+ */
+static void ipa_hardware_dcd_config(struct ipa *ipa)
+{
+ /* Recommended values for IPA 3.5 and later according to IPA HPG */
+ ipa_idle_indication_cfg(ipa, 256, false);
+}
+
+static void ipa_hardware_dcd_deconfig(struct ipa *ipa)
+{
+ /* Power-on reset values */
+ ipa_idle_indication_cfg(ipa, 0, true);
+}
+
+/**
+ * ipa_hardware_config() - Primitive hardware initialization
+ * @ipa: IPA pointer
+ * @data: IPA configuration data
+ */
+static void ipa_hardware_config(struct ipa *ipa, const struct ipa_data *data)
+{
+ ipa_hardware_config_bcr(ipa, data);
+ ipa_hardware_config_tx(ipa);
+ ipa_hardware_config_clkon(ipa);
+ ipa_hardware_config_comp(ipa);
+ ipa_hardware_config_qsb(ipa, data);
+ ipa_hardware_config_timing(ipa);
+ ipa_hardware_config_hashing(ipa);
+ ipa_hardware_dcd_config(ipa);
+}
+
+/**
+ * ipa_hardware_deconfig() - Inverse of ipa_hardware_config()
+ * @ipa: IPA pointer
+ *
+ * This restores the power-on reset values (even if they aren't different)
+ */
+static void ipa_hardware_deconfig(struct ipa *ipa)
+{
+ /* Mostly we just leave things as we set them. */
+ ipa_hardware_dcd_deconfig(ipa);
+}
+
+/**
+ * ipa_config() - Configure IPA hardware
+ * @ipa: IPA pointer
+ * @data: IPA configuration data
+ *
+ * Perform initialization requiring IPA power to be enabled.
+ */
+static int ipa_config(struct ipa *ipa, const struct ipa_data *data)
+{
+ int ret;
+
+ ipa_hardware_config(ipa, data);
+
+ ret = ipa_mem_config(ipa);
+ if (ret)
+ goto err_hardware_deconfig;
+
+ ipa->interrupt = ipa_interrupt_config(ipa);
+ if (IS_ERR(ipa->interrupt)) {
+ ret = PTR_ERR(ipa->interrupt);
+ ipa->interrupt = NULL;
+ goto err_mem_deconfig;
+ }
+
+ ipa_uc_config(ipa);
+
+ ret = ipa_endpoint_config(ipa);
+ if (ret)
+ goto err_uc_deconfig;
+
+ ipa_table_config(ipa); /* No deconfig required */
+
+ /* Assign resource limitation to each group; no deconfig required */
+ ret = ipa_resource_config(ipa, data->resource_data);
+ if (ret)
+ goto err_endpoint_deconfig;
+
+ ret = ipa_modem_config(ipa);
+ if (ret)
+ goto err_endpoint_deconfig;
+
+ return 0;
+
+err_endpoint_deconfig:
+ ipa_endpoint_deconfig(ipa);
+err_uc_deconfig:
+ ipa_uc_deconfig(ipa);
+ ipa_interrupt_deconfig(ipa->interrupt);
+ ipa->interrupt = NULL;
+err_mem_deconfig:
+ ipa_mem_deconfig(ipa);
+err_hardware_deconfig:
+ ipa_hardware_deconfig(ipa);
+
+ return ret;
+}
+
+/**
+ * ipa_deconfig() - Inverse of ipa_config()
+ * @ipa: IPA pointer
+ */
+static void ipa_deconfig(struct ipa *ipa)
+{
+ ipa_modem_deconfig(ipa);
+ ipa_endpoint_deconfig(ipa);
+ ipa_uc_deconfig(ipa);
+ ipa_interrupt_deconfig(ipa->interrupt);
+ ipa->interrupt = NULL;
+ ipa_mem_deconfig(ipa);
+ ipa_hardware_deconfig(ipa);
+}
+
+static int ipa_firmware_load(struct device *dev)
+{
+ const struct firmware *fw;
+ struct device_node *node;
+ struct resource res;
+ phys_addr_t phys;
+ const char *path;
+ ssize_t size;
+ void *virt;
+ int ret;
+
+ node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (!node) {
+ dev_err(dev, "DT error getting \"memory-region\" property\n");
+ return -EINVAL;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ of_node_put(node);
+ if (ret) {
+ dev_err(dev, "error %d getting \"memory-region\" resource\n",
+ ret);
+ return ret;
+ }
+
+ /* Use name from DTB if specified; use default for *any* error */
+ ret = of_property_read_string(dev->of_node, "firmware-name", &path);
+ if (ret) {
+ dev_dbg(dev, "error %d getting \"firmware-name\" resource\n",
+ ret);
+ path = IPA_FW_PATH_DEFAULT;
+ }
+
+ ret = request_firmware(&fw, path, dev);
+ if (ret) {
+ dev_err(dev, "error %d requesting \"%s\"\n", ret, path);
+ return ret;
+ }
+
+ phys = res.start;
+ size = (size_t)resource_size(&res);
+ virt = memremap(phys, size, MEMREMAP_WC);
+ if (!virt) {
+ dev_err(dev, "unable to remap firmware memory\n");
+ ret = -ENOMEM;
+ goto out_release_firmware;
+ }
+
+ ret = qcom_mdt_load(dev, fw, path, IPA_PAS_ID, virt, phys, size, NULL);
+ if (ret)
+ dev_err(dev, "error %d loading \"%s\"\n", ret, path);
+ else if ((ret = qcom_scm_pas_auth_and_reset(IPA_PAS_ID)))
+ dev_err(dev, "error %d authenticating \"%s\"\n", ret, path);
+
+ memunmap(virt);
+out_release_firmware:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static const struct of_device_id ipa_match[] = {
+ {
+ .compatible = "qcom,msm8998-ipa",
+ .data = &ipa_data_v3_1,
+ },
+ {
+ .compatible = "qcom,sdm845-ipa",
+ .data = &ipa_data_v3_5_1,
+ },
+ {
+ .compatible = "qcom,sc7180-ipa",
+ .data = &ipa_data_v4_2,
+ },
+ {
+ .compatible = "qcom,sdx55-ipa",
+ .data = &ipa_data_v4_5,
+ },
+ {
+ .compatible = "qcom,sm6350-ipa",
+ .data = &ipa_data_v4_7,
+ },
+ {
+ .compatible = "qcom,sm8350-ipa",
+ .data = &ipa_data_v4_9,
+ },
+ {
+ .compatible = "qcom,sc7280-ipa",
+ .data = &ipa_data_v4_11,
+ },
+ {
+ .compatible = "qcom,sdx65-ipa",
+ .data = &ipa_data_v5_0,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ipa_match);
+
+/* Check things that can be validated at build time. This just
+ * groups these things BUILD_BUG_ON() calls don't clutter the rest
+ * of the code.
+ * */
+static void ipa_validate_build(void)
+{
+ /* At one time we assumed a 64-bit build, allowing some do_div()
+ * calls to be replaced by simple division or modulo operations.
+ * We currently only perform divide and modulo operations on u32,
+ * u16, or size_t objects, and of those only size_t has any chance
+ * of being a 64-bit value. (It should be guaranteed 32 bits wide
+ * on a 32-bit build, but there is no harm in verifying that.)
+ */
+ BUILD_BUG_ON(!IS_ENABLED(CONFIG_64BIT) && sizeof(size_t) != 4);
+
+ /* Code assumes the EE ID for the AP is 0 (zeroed structure field) */
+ BUILD_BUG_ON(GSI_EE_AP != 0);
+
+ /* There's no point if we have no channels or event rings */
+ BUILD_BUG_ON(!GSI_CHANNEL_COUNT_MAX);
+ BUILD_BUG_ON(!GSI_EVT_RING_COUNT_MAX);
+
+ /* GSI hardware design limits */
+ BUILD_BUG_ON(GSI_CHANNEL_COUNT_MAX > 32);
+ BUILD_BUG_ON(GSI_EVT_RING_COUNT_MAX > 31);
+
+ /* The number of TREs in a transaction is limited by the channel's
+ * TLV FIFO size. A transaction structure uses 8-bit fields
+ * to represents the number of TREs it has allocated and used.
+ */
+ BUILD_BUG_ON(GSI_TLV_MAX > U8_MAX);
+
+ /* This is used as a divisor */
+ BUILD_BUG_ON(!IPA_AGGR_GRANULARITY);
+
+ /* Aggregation granularity value can't be 0, and must fit */
+ BUILD_BUG_ON(!ipa_aggr_granularity_val(IPA_AGGR_GRANULARITY));
+}
+
+static enum ipa_firmware_loader ipa_firmware_loader(struct device *dev)
+{
+ bool modem_init;
+ const char *str;
+ int ret;
+
+ /* Look up the old and new properties by name */
+ modem_init = of_property_read_bool(dev->of_node, "modem-init");
+ ret = of_property_read_string(dev->of_node, "qcom,gsi-loader", &str);
+
+ /* If the new property doesn't exist, it's legacy behavior */
+ if (ret == -EINVAL) {
+ if (modem_init)
+ return IPA_LOADER_MODEM;
+ goto out_self;
+ }
+
+ /* Any other error on the new property means it's poorly defined */
+ if (ret)
+ return IPA_LOADER_INVALID;
+
+ /* New property value exists; if old one does too, that's invalid */
+ if (modem_init)
+ return IPA_LOADER_INVALID;
+
+ /* Modem loads GSI firmware for "modem" */
+ if (!strcmp(str, "modem"))
+ return IPA_LOADER_MODEM;
+
+ /* No GSI firmware load is needed for "skip" */
+ if (!strcmp(str, "skip"))
+ return IPA_LOADER_SKIP;
+
+ /* Any value other than "self" is an error */
+ if (strcmp(str, "self"))
+ return IPA_LOADER_INVALID;
+out_self:
+ /* We need Trust Zone to load firmware; make sure it's available */
+ if (qcom_scm_is_available())
+ return IPA_LOADER_SELF;
+
+ return IPA_LOADER_DEFER;
+}
+
+/**
+ * ipa_probe() - IPA platform driver probe function
+ * @pdev: Platform device pointer
+ *
+ * Return: 0 if successful, or a negative error code (possibly
+ * EPROBE_DEFER)
+ *
+ * This is the main entry point for the IPA driver. Initialization proceeds
+ * in several stages:
+ * - The "init" stage involves activities that can be initialized without
+ * access to the IPA hardware.
+ * - The "config" stage requires IPA power to be active so IPA registers
+ * can be accessed, but does not require the use of IPA immediate commands.
+ * - The "setup" stage uses IPA immediate commands, and so requires the GSI
+ * layer to be initialized.
+ *
+ * A Boolean Device Tree "modem-init" property determines whether GSI
+ * initialization will be performed by the AP (Trust Zone) or the modem.
+ * If the AP does GSI initialization, the setup phase is entered after
+ * this has completed successfully. Otherwise the modem initializes
+ * the GSI layer and signals it has finished by sending an SMP2P interrupt
+ * to the AP; this triggers the start if IPA setup.
+ */
+static int ipa_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ enum ipa_firmware_loader loader;
+ const struct ipa_data *data;
+ struct ipa_power *power;
+ struct ipa *ipa;
+ int ret;
+
+ ipa_validate_build();
+
+ /* Get configuration data early; needed for power initialization */
+ data = of_device_get_match_data(dev);
+ if (!data) {
+ dev_err(dev, "matched hardware not supported\n");
+ return -ENODEV;
+ }
+
+ if (!ipa_version_supported(data->version)) {
+ dev_err(dev, "unsupported IPA version %u\n", data->version);
+ return -EINVAL;
+ }
+
+ if (!data->modem_route_count) {
+ dev_err(dev, "modem_route_count cannot be zero\n");
+ return -EINVAL;
+ }
+
+ loader = ipa_firmware_loader(dev);
+ if (loader == IPA_LOADER_INVALID)
+ return -EINVAL;
+ if (loader == IPA_LOADER_DEFER)
+ return -EPROBE_DEFER;
+
+ /* The clock and interconnects might not be ready when we're
+ * probed, so might return -EPROBE_DEFER.
+ */
+ power = ipa_power_init(dev, data->power_data);
+ if (IS_ERR(power))
+ return PTR_ERR(power);
+
+ /* No more EPROBE_DEFER. Allocate and initialize the IPA structure */
+ ipa = kzalloc(sizeof(*ipa), GFP_KERNEL);
+ if (!ipa) {
+ ret = -ENOMEM;
+ goto err_power_exit;
+ }
+
+ ipa->pdev = pdev;
+ dev_set_drvdata(dev, ipa);
+ ipa->power = power;
+ ipa->version = data->version;
+ ipa->modem_route_count = data->modem_route_count;
+ init_completion(&ipa->completion);
+
+ ret = ipa_reg_init(ipa);
+ if (ret)
+ goto err_kfree_ipa;
+
+ ret = ipa_mem_init(ipa, data->mem_data);
+ if (ret)
+ goto err_reg_exit;
+
+ ret = gsi_init(&ipa->gsi, pdev, ipa->version, data->endpoint_count,
+ data->endpoint_data);
+ if (ret)
+ goto err_mem_exit;
+
+ /* Result is a non-zero mask of endpoints that support filtering */
+ ret = ipa_endpoint_init(ipa, data->endpoint_count, data->endpoint_data);
+ if (ret)
+ goto err_gsi_exit;
+
+ ret = ipa_table_init(ipa);
+ if (ret)
+ goto err_endpoint_exit;
+
+ ret = ipa_smp2p_init(ipa, loader == IPA_LOADER_MODEM);
+ if (ret)
+ goto err_table_exit;
+
+ /* Power needs to be active for config and setup */
+ ret = pm_runtime_get_sync(dev);
+ if (WARN_ON(ret < 0))
+ goto err_power_put;
+
+ ret = ipa_config(ipa, data);
+ if (ret)
+ goto err_power_put;
+
+ dev_info(dev, "IPA driver initialized");
+
+ /* If the modem is loading GSI firmware, it will trigger a call to
+ * ipa_setup() when it has finished. In that case we're done here.
+ */
+ if (loader == IPA_LOADER_MODEM)
+ goto done;
+
+ if (loader == IPA_LOADER_SELF) {
+ /* The AP is loading GSI firmware; do so now */
+ ret = ipa_firmware_load(dev);
+ if (ret)
+ goto err_deconfig;
+ } /* Otherwise loader == IPA_LOADER_SKIP */
+
+ /* GSI firmware is loaded; proceed to setup */
+ ret = ipa_setup(ipa);
+ if (ret)
+ goto err_deconfig;
+done:
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
+
+ return 0;
+
+err_deconfig:
+ ipa_deconfig(ipa);
+err_power_put:
+ pm_runtime_put_noidle(dev);
+ ipa_smp2p_exit(ipa);
+err_table_exit:
+ ipa_table_exit(ipa);
+err_endpoint_exit:
+ ipa_endpoint_exit(ipa);
+err_gsi_exit:
+ gsi_exit(&ipa->gsi);
+err_mem_exit:
+ ipa_mem_exit(ipa);
+err_reg_exit:
+ ipa_reg_exit(ipa);
+err_kfree_ipa:
+ kfree(ipa);
+err_power_exit:
+ ipa_power_exit(power);
+
+ return ret;
+}
+
+static int ipa_remove(struct platform_device *pdev)
+{
+ struct ipa *ipa = dev_get_drvdata(&pdev->dev);
+ struct ipa_power *power = ipa->power;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ /* Prevent the modem from triggering a call to ipa_setup(). This
+ * also ensures a modem-initiated setup that's underway completes.
+ */
+ ipa_smp2p_irq_disable_setup(ipa);
+
+ ret = pm_runtime_get_sync(dev);
+ if (WARN_ON(ret < 0))
+ goto out_power_put;
+
+ if (ipa->setup_complete) {
+ ret = ipa_modem_stop(ipa);
+ /* If starting or stopping is in progress, try once more */
+ if (ret == -EBUSY) {
+ usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC);
+ ret = ipa_modem_stop(ipa);
+ }
+ if (ret)
+ return ret;
+
+ ipa_teardown(ipa);
+ }
+
+ ipa_deconfig(ipa);
+out_power_put:
+ pm_runtime_put_noidle(dev);
+ ipa_smp2p_exit(ipa);
+ ipa_table_exit(ipa);
+ ipa_endpoint_exit(ipa);
+ gsi_exit(&ipa->gsi);
+ ipa_mem_exit(ipa);
+ ipa_reg_exit(ipa);
+ kfree(ipa);
+ ipa_power_exit(power);
+
+ dev_info(dev, "IPA driver removed");
+
+ return 0;
+}
+
+static void ipa_shutdown(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = ipa_remove(pdev);
+ if (ret)
+ dev_err(&pdev->dev, "shutdown: remove returned %d\n", ret);
+}
+
+static const struct attribute_group *ipa_attribute_groups[] = {
+ &ipa_attribute_group,
+ &ipa_feature_attribute_group,
+ &ipa_endpoint_id_attribute_group,
+ &ipa_modem_attribute_group,
+ NULL,
+};
+
+static struct platform_driver ipa_driver = {
+ .probe = ipa_probe,
+ .remove = ipa_remove,
+ .shutdown = ipa_shutdown,
+ .driver = {
+ .name = "ipa",
+ .pm = &ipa_pm_ops,
+ .of_match_table = ipa_match,
+ .dev_groups = ipa_attribute_groups,
+ },
+};
+
+module_platform_driver(ipa_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Qualcomm IP Accelerator device driver");