diff options
Diffstat (limited to 'drivers/net/phy/mxl-gpy.c')
-rw-r--r-- | drivers/net/phy/mxl-gpy.c | 74 |
1 files changed, 50 insertions, 24 deletions
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c index ea1073adc5..e5f8ac4b46 100644 --- a/drivers/net/phy/mxl-gpy.c +++ b/drivers/net/phy/mxl-gpy.c @@ -107,6 +107,7 @@ struct gpy_priv { u8 fw_major; u8 fw_minor; + u32 wolopts; /* It takes 3 seconds to fully switch out of loopback mode before * it can safely re-enter loopback mode. Record the time when @@ -221,6 +222,15 @@ static int gpy_hwmon_register(struct phy_device *phydev) } #endif +static int gpy_ack_interrupt(struct phy_device *phydev) +{ + int ret; + + /* Clear all pending interrupts */ + ret = phy_read(phydev, PHY_ISTAT); + return ret < 0 ? ret : 0; +} + static int gpy_mbox_read(struct phy_device *phydev, u32 addr) { struct gpy_priv *priv = phydev->priv; @@ -262,16 +272,16 @@ out: static int gpy_config_init(struct phy_device *phydev) { - int ret; + /* Nothing to configure. Configuration Requirement Placeholder */ + return 0; +} - /* Mask all interrupts */ - ret = phy_write(phydev, PHY_IMASK, 0); - if (ret) - return ret; +static int gpy21x_config_init(struct phy_device *phydev) +{ + __set_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->possible_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, phydev->possible_interfaces); - /* Clear all pending interrupts */ - ret = phy_read(phydev, PHY_ISTAT); - return ret < 0 ? ret : 0; + return gpy_config_init(phydev); } static int gpy_probe(struct phy_device *phydev) @@ -619,11 +629,23 @@ static int gpy_read_status(struct phy_device *phydev) static int gpy_config_intr(struct phy_device *phydev) { + struct gpy_priv *priv = phydev->priv; u16 mask = 0; + int ret; + + ret = gpy_ack_interrupt(phydev); + if (ret) + return ret; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) mask = PHY_IMASK_MASK; + if (priv->wolopts & WAKE_MAGIC) + mask |= PHY_IMASK_WOL; + + if (priv->wolopts & WAKE_PHY) + mask |= PHY_IMASK_LSTC; + return phy_write(phydev, PHY_IMASK, mask); } @@ -670,6 +692,7 @@ static int gpy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { struct net_device *attach_dev = phydev->attached_dev; + struct gpy_priv *priv = phydev->priv; int ret; if (wol->wolopts & WAKE_MAGIC) { @@ -717,6 +740,8 @@ static int gpy_set_wol(struct phy_device *phydev, ret = phy_read(phydev, PHY_ISTAT); if (ret < 0) return ret; + + priv->wolopts |= WAKE_MAGIC; } else { /* Disable magic packet matching */ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, @@ -724,6 +749,13 @@ static int gpy_set_wol(struct phy_device *phydev, WOL_EN); if (ret < 0) return ret; + + /* Disable the WOL interrupt */ + ret = phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_WOL); + if (ret < 0) + return ret; + + priv->wolopts &= ~WAKE_MAGIC; } if (wol->wolopts & WAKE_PHY) { @@ -740,9 +772,11 @@ static int gpy_set_wol(struct phy_device *phydev, if (ret & (PHY_IMASK_MASK & ~PHY_IMASK_LSTC)) phy_trigger_machine(phydev); + priv->wolopts |= WAKE_PHY; return 0; } + priv->wolopts &= ~WAKE_PHY; /* Disable the link state change interrupt */ return phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC); } @@ -750,18 +784,10 @@ static int gpy_set_wol(struct phy_device *phydev, static void gpy_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { - int ret; + struct gpy_priv *priv = phydev->priv; wol->supported = WAKE_MAGIC | WAKE_PHY; - wol->wolopts = 0; - - ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, VPSPEC2_WOL_CTL); - if (ret & WOL_EN) - wol->wolopts |= WAKE_MAGIC; - - ret = phy_read(phydev, PHY_IMASK); - if (ret & PHY_IMASK_LSTC) - wol->wolopts |= WAKE_PHY; + wol->wolopts = priv->wolopts; } static int gpy_loopback(struct phy_device *phydev, bool enable) @@ -867,7 +893,7 @@ static struct phy_driver gpy_drivers[] = { .phy_id_mask = PHY_ID_GPY21xB_MASK, .name = "Maxlinear Ethernet GPY211B", .get_features = genphy_c45_pma_read_abilities, - .config_init = gpy_config_init, + .config_init = gpy21x_config_init, .probe = gpy_probe, .suspend = genphy_suspend, .resume = genphy_resume, @@ -884,7 +910,7 @@ static struct phy_driver gpy_drivers[] = { PHY_ID_MATCH_MODEL(PHY_ID_GPY211C), .name = "Maxlinear Ethernet GPY211C", .get_features = genphy_c45_pma_read_abilities, - .config_init = gpy_config_init, + .config_init = gpy21x_config_init, .probe = gpy_probe, .suspend = genphy_suspend, .resume = genphy_resume, @@ -902,7 +928,7 @@ static struct phy_driver gpy_drivers[] = { .phy_id_mask = PHY_ID_GPY21xB_MASK, .name = "Maxlinear Ethernet GPY212B", .get_features = genphy_c45_pma_read_abilities, - .config_init = gpy_config_init, + .config_init = gpy21x_config_init, .probe = gpy_probe, .suspend = genphy_suspend, .resume = genphy_resume, @@ -919,7 +945,7 @@ static struct phy_driver gpy_drivers[] = { PHY_ID_MATCH_MODEL(PHY_ID_GPY212C), .name = "Maxlinear Ethernet GPY212C", .get_features = genphy_c45_pma_read_abilities, - .config_init = gpy_config_init, + .config_init = gpy21x_config_init, .probe = gpy_probe, .suspend = genphy_suspend, .resume = genphy_resume, @@ -937,7 +963,7 @@ static struct phy_driver gpy_drivers[] = { .phy_id_mask = PHY_ID_GPYx15B_MASK, .name = "Maxlinear Ethernet GPY215B", .get_features = genphy_c45_pma_read_abilities, - .config_init = gpy_config_init, + .config_init = gpy21x_config_init, .probe = gpy_probe, .suspend = genphy_suspend, .resume = genphy_resume, @@ -954,7 +980,7 @@ static struct phy_driver gpy_drivers[] = { PHY_ID_MATCH_MODEL(PHY_ID_GPY215C), .name = "Maxlinear Ethernet GPY215C", .get_features = genphy_c45_pma_read_abilities, - .config_init = gpy_config_init, + .config_init = gpy21x_config_init, .probe = gpy_probe, .suspend = genphy_suspend, .resume = genphy_resume, |