diff options
Diffstat (limited to 'drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h')
-rw-r--r-- | drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h | 311 |
1 files changed, 311 insertions, 0 deletions
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h b/drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h new file mode 100644 index 0000000000..0340bba968 --- /dev/null +++ b/drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: ISC +/* + * Copyright (c) 2010 Broadcom Corporation + */ + +#ifndef _SBCHIPC_H +#define _SBCHIPC_H + +#include "defs.h" /* for PAD macro */ + +#define CHIPCREGOFFS(field) offsetof(struct chipcregs, field) + +struct chipcregs { + u32 chipid; /* 0x0 */ + u32 capabilities; + u32 corecontrol; /* corerev >= 1 */ + u32 bist; + + /* OTP */ + u32 otpstatus; /* 0x10, corerev >= 10 */ + u32 otpcontrol; + u32 otpprog; + u32 otplayout; /* corerev >= 23 */ + + /* Interrupt control */ + u32 intstatus; /* 0x20 */ + u32 intmask; + + /* Chip specific regs */ + u32 chipcontrol; /* 0x28, rev >= 11 */ + u32 chipstatus; /* 0x2c, rev >= 11 */ + + /* Jtag Master */ + u32 jtagcmd; /* 0x30, rev >= 10 */ + u32 jtagir; + u32 jtagdr; + u32 jtagctrl; + + /* serial flash interface registers */ + u32 flashcontrol; /* 0x40 */ + u32 flashaddress; + u32 flashdata; + u32 PAD[1]; + + /* Silicon backplane configuration broadcast control */ + u32 broadcastaddress; /* 0x50 */ + u32 broadcastdata; + + /* gpio - cleared only by power-on-reset */ + u32 gpiopullup; /* 0x58, corerev >= 20 */ + u32 gpiopulldown; /* 0x5c, corerev >= 20 */ + u32 gpioin; /* 0x60 */ + u32 gpioout; /* 0x64 */ + u32 gpioouten; /* 0x68 */ + u32 gpiocontrol; /* 0x6C */ + u32 gpiointpolarity; /* 0x70 */ + u32 gpiointmask; /* 0x74 */ + + /* GPIO events corerev >= 11 */ + u32 gpioevent; + u32 gpioeventintmask; + + /* Watchdog timer */ + u32 watchdog; /* 0x80 */ + + /* GPIO events corerev >= 11 */ + u32 gpioeventintpolarity; + + /* GPIO based LED powersave registers corerev >= 16 */ + u32 gpiotimerval; /* 0x88 */ + u32 gpiotimeroutmask; + + /* clock control */ + u32 clockcontrol_n; /* 0x90 */ + u32 clockcontrol_sb; /* aka m0 */ + u32 clockcontrol_pci; /* aka m1 */ + u32 clockcontrol_m2; /* mii/uart/mipsref */ + u32 clockcontrol_m3; /* cpu */ + u32 clkdiv; /* corerev >= 3 */ + u32 gpiodebugsel; /* corerev >= 28 */ + u32 capabilities_ext; /* 0xac */ + + /* pll delay registers (corerev >= 4) */ + u32 pll_on_delay; /* 0xb0 */ + u32 fref_sel_delay; + u32 slow_clk_ctl; /* 5 < corerev < 10 */ + u32 PAD; + + /* Instaclock registers (corerev >= 10) */ + u32 system_clk_ctl; /* 0xc0 */ + u32 clkstatestretch; + u32 PAD[2]; + + /* Indirect backplane access (corerev >= 22) */ + u32 bp_addrlow; /* 0xd0 */ + u32 bp_addrhigh; + u32 bp_data; + u32 PAD; + u32 bp_indaccess; + u32 PAD[3]; + + /* More clock dividers (corerev >= 32) */ + u32 clkdiv2; + u32 PAD[2]; + + /* In AI chips, pointer to erom */ + u32 eromptr; /* 0xfc */ + + /* ExtBus control registers (corerev >= 3) */ + u32 pcmcia_config; /* 0x100 */ + u32 pcmcia_memwait; + u32 pcmcia_attrwait; + u32 pcmcia_iowait; + u32 ide_config; + u32 ide_memwait; + u32 ide_attrwait; + u32 ide_iowait; + u32 prog_config; + u32 prog_waitcount; + u32 flash_config; + u32 flash_waitcount; + u32 SECI_config; /* 0x130 SECI configuration */ + u32 PAD[3]; + + /* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */ + u32 eci_output; /* 0x140 */ + u32 eci_control; + u32 eci_inputlo; + u32 eci_inputmi; + u32 eci_inputhi; + u32 eci_inputintpolaritylo; + u32 eci_inputintpolaritymi; + u32 eci_inputintpolarityhi; + u32 eci_intmasklo; + u32 eci_intmaskmi; + u32 eci_intmaskhi; + u32 eci_eventlo; + u32 eci_eventmi; + u32 eci_eventhi; + u32 eci_eventmasklo; + u32 eci_eventmaskmi; + u32 eci_eventmaskhi; + u32 PAD[3]; + + /* SROM interface (corerev >= 32) */ + u32 sromcontrol; /* 0x190 */ + u32 sromaddress; + u32 sromdata; + u32 PAD[17]; + + /* Clock control and hardware workarounds (corerev >= 20) */ + u32 clk_ctl_st; /* 0x1e0 */ + u32 hw_war; + u32 PAD[70]; + + /* UARTs */ + u8 uart0data; /* 0x300 */ + u8 uart0imr; + u8 uart0fcr; + u8 uart0lcr; + u8 uart0mcr; + u8 uart0lsr; + u8 uart0msr; + u8 uart0scratch; + u8 PAD[248]; /* corerev >= 1 */ + + u8 uart1data; /* 0x400 */ + u8 uart1imr; + u8 uart1fcr; + u8 uart1lcr; + u8 uart1mcr; + u8 uart1lsr; + u8 uart1msr; + u8 uart1scratch; + u32 PAD[62]; + + /* save/restore, corerev >= 48 */ + u32 sr_capability; /* 0x500 */ + u32 sr_control0; /* 0x504 */ + u32 sr_control1; /* 0x508 */ + u32 gpio_control; /* 0x50C */ + u32 PAD[60]; + + /* PMU registers (corerev >= 20) */ + u32 pmucontrol; /* 0x600 */ + u32 pmucapabilities; + u32 pmustatus; + u32 res_state; + u32 res_pending; + u32 pmutimer; + u32 min_res_mask; + u32 max_res_mask; + u32 res_table_sel; + u32 res_dep_mask; + u32 res_updn_timer; + u32 res_timer; + u32 clkstretch; + u32 pmuwatchdog; + u32 gpiosel; /* 0x638, rev >= 1 */ + u32 gpioenable; /* 0x63c, rev >= 1 */ + u32 res_req_timer_sel; + u32 res_req_timer; + u32 res_req_mask; + u32 pmucapabilities_ext; /* 0x64c, pmurev >=15 */ + u32 chipcontrol_addr; /* 0x650 */ + u32 chipcontrol_data; /* 0x654 */ + u32 regcontrol_addr; + u32 regcontrol_data; + u32 pllcontrol_addr; + u32 pllcontrol_data; + u32 pmustrapopt; /* 0x668, corerev >= 28 */ + u32 pmu_xtalfreq; /* 0x66C, pmurev >= 10 */ + u32 retention_ctl; /* 0x670, pmurev >= 15 */ + u32 PAD[3]; + u32 retention_grpidx; /* 0x680 */ + u32 retention_grpctl; /* 0x684 */ + u32 PAD[94]; + u16 sromotp[768]; +}; + +/* chipid */ +#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ +#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ +#define CID_REV_SHIFT 16 /* Chip Revision shift */ +#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ +#define CID_PKG_SHIFT 20 /* Package Option shift */ +#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ +#define CID_CC_SHIFT 24 +#define CID_TYPE_MASK 0xf0000000 /* Chip Type */ +#define CID_TYPE_SHIFT 28 + +/* capabilities */ +#define CC_CAP_UARTS_MASK 0x00000003 /* Number of UARTs */ +#define CC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ +#define CC_CAP_UCLKSEL 0x00000018 /* UARTs clock select */ +/* UARTs are driven by internal divided clock */ +#define CC_CAP_UINTCLK 0x00000008 +#define CC_CAP_UARTGPIO 0x00000020 /* UARTs own GPIOs 15:12 */ +#define CC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */ +#define CC_CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */ +#define CC_CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */ +#define CC_CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */ +#define CC_CAP_FLASH_MASK 0x00000700 /* Type of flash */ +#define CC_CAP_PLL_MASK 0x00038000 /* Type of PLL */ +#define CC_CAP_PWR_CTL 0x00040000 /* Power control */ +#define CC_CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ +#define CC_CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */ +#define CC_CAP_OTPSIZE_BASE 5 /* OTP Size base */ +#define CC_CAP_JTAGP 0x00400000 /* JTAG Master Present */ +#define CC_CAP_ROM 0x00800000 /* Internal boot rom active */ +#define CC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */ +#define CC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */ +#define CC_CAP_SROM 0x40000000 /* Srom Present, rev >= 32 */ +/* Nand flash present, rev >= 35 */ +#define CC_CAP_NFLASH 0x80000000 + +#define CC_CAP2_SECI 0x00000001 /* SECI Present, rev >= 36 */ +/* GSIO (spi/i2c) present, rev >= 37 */ +#define CC_CAP2_GSIO 0x00000002 + +/* sr_control0, rev >= 48 */ +#define CC_SR_CTL0_ENABLE_MASK BIT(0) +#define CC_SR_CTL0_ENABLE_SHIFT 0 +#define CC_SR_CTL0_EN_SR_ENG_CLK_SHIFT 1 /* sr_clk to sr_memory enable */ +#define CC_SR_CTL0_RSRC_TRIGGER_SHIFT 2 /* Rising edge resource trigger 0 to + * sr_engine + */ +#define CC_SR_CTL0_MIN_DIV_SHIFT 6 /* Min division value for fast clk + * in sr_engine + */ +#define CC_SR_CTL0_EN_SBC_STBY_SHIFT 16 +#define CC_SR_CTL0_EN_SR_ALP_CLK_MASK_SHIFT 18 +#define CC_SR_CTL0_EN_SR_HT_CLK_SHIFT 19 +#define CC_SR_CTL0_ALLOW_PIC_SHIFT 20 /* Allow pic to separate power + * domains + */ +#define CC_SR_CTL0_MAX_SR_LQ_CLK_CNT_SHIFT 25 +#define CC_SR_CTL0_EN_MEM_DISABLE_FOR_SLEEP 30 + +/* pmucapabilities */ +#define PCAP_REV_MASK 0x000000ff +#define PCAP_RC_MASK 0x00001f00 +#define PCAP_RC_SHIFT 8 +#define PCAP_TC_MASK 0x0001e000 +#define PCAP_TC_SHIFT 13 +#define PCAP_PC_MASK 0x001e0000 +#define PCAP_PC_SHIFT 17 +#define PCAP_VC_MASK 0x01e00000 +#define PCAP_VC_SHIFT 21 +#define PCAP_CC_MASK 0x1e000000 +#define PCAP_CC_SHIFT 25 +#define PCAP5_PC_MASK 0x003e0000 /* PMU corerev >= 5 */ +#define PCAP5_PC_SHIFT 17 +#define PCAP5_VC_MASK 0x07c00000 +#define PCAP5_VC_SHIFT 22 +#define PCAP5_CC_MASK 0xf8000000 +#define PCAP5_CC_SHIFT 27 +/* pmucapabilites_ext PMU rev >= 15 */ +#define PCAPEXT_SR_SUPPORTED_MASK (1 << 1) +/* retention_ctl PMU rev >= 15 */ +#define PMU_RCTL_MACPHY_DISABLE_MASK (1 << 26) +#define PMU_RCTL_LOGIC_DISABLE_MASK (1 << 27) + + +/* +* Maximum delay for the PMU state transition in us. +* This is an upper bound intended for spinwaits etc. +*/ +#define PMU_MAX_TRANSITION_DLY 15000 + +#endif /* _SBCHIPC_H */ |