diff options
Diffstat (limited to 'drivers/net/wireless/intersil')
55 files changed, 2 insertions, 31698 deletions
diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig index bd6bf70ece..201b1534a9 100644 --- a/drivers/net/wireless/intersil/Kconfig +++ b/drivers/net/wireless/intersil/Kconfig @@ -12,8 +12,6 @@ config WLAN_VENDOR_INTERSIL if WLAN_VENDOR_INTERSIL -source "drivers/net/wireless/intersil/hostap/Kconfig" -source "drivers/net/wireless/intersil/orinoco/Kconfig" source "drivers/net/wireless/intersil/p54/Kconfig" endif # WLAN_VENDOR_INTERSIL diff --git a/drivers/net/wireless/intersil/Makefile b/drivers/net/wireless/intersil/Makefile index 65281d1b3d..27e9b2869d 100644 --- a/drivers/net/wireless/intersil/Makefile +++ b/drivers/net/wireless/intersil/Makefile @@ -1,4 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_HOSTAP) += hostap/ -obj-$(CONFIG_HERMES) += orinoco/ obj-$(CONFIG_P54_COMMON) += p54/ diff --git a/drivers/net/wireless/intersil/hostap/Kconfig b/drivers/net/wireless/intersil/hostap/Kconfig deleted file mode 100644 index 2edff8efbc..0000000000 --- a/drivers/net/wireless/intersil/hostap/Kconfig +++ /dev/null @@ -1,95 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config HOSTAP - tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - select CRYPTO - select CRYPTO_MICHAEL_MIC - select CRC32 - select LIB80211 - select LIB80211_CRYPT_WEP - select LIB80211_CRYPT_TKIP - select LIB80211_CRYPT_CCMP - help - Shared driver code for IEEE 802.11b wireless cards based on - Intersil Prism2/2.5/3 chipset. This driver supports so called - Host AP mode that allows the card to act as an IEEE 802.11 - access point. - - See <http://hostap.epitest.fi/> for more information about the - Host AP driver configuration and tools. This site includes - information and tools (hostapd and wpa_supplicant) for WPA/WPA2 - support. - - This option includes the base Host AP driver code that is shared by - different hardware models. You will also need to enable support for - PLX/PCI/CS version of the driver to actually use the driver. - - The driver can be compiled as a module and it will be called - hostap. - -config HOSTAP_FIRMWARE - bool "Support downloading firmware images with Host AP driver" - depends on HOSTAP - help - Configure Host AP driver to include support for firmware image - download. This option by itself only enables downloading to the - volatile memory, i.e. the card RAM. This option is required to - support cards that don't have firmware in flash, such as D-Link - DWL-520 rev E and D-Link DWL-650 rev P. - - Firmware image downloading needs a user space tool, prism2_srec. - It is available from http://hostap.epitest.fi/. - -config HOSTAP_FIRMWARE_NVRAM - bool "Support for non-volatile firmware download" - depends on HOSTAP_FIRMWARE - help - Allow Host AP driver to write firmware images to the non-volatile - card memory, i.e. flash memory that survives power cycling. - Enable this option if you want to be able to change card firmware - permanently. - - Firmware image downloading needs a user space tool, prism2_srec. - It is available from http://hostap.epitest.fi/. - -config HOSTAP_PLX - tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors" - depends on PCI && HOSTAP && HAS_IOPORT - help - Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based - PCI adaptors. - - "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this - driver and its help text includes more information about the Host AP - driver. - - The driver can be compiled as a module and will be named - hostap_plx. - -config HOSTAP_PCI - tristate "Host AP driver for Prism2.5 PCI adaptors" - depends on PCI && HOSTAP - help - Host AP driver's version for Prism2.5 PCI adaptors. - - "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this - driver and its help text includes more information about the Host AP - driver. - - The driver can be compiled as a module and will be named - hostap_pci. - -config HOSTAP_CS - tristate "Host AP driver for Prism2/2.5/3 PC Cards" - depends on PCMCIA && HOSTAP - help - Host AP driver's version for Prism2/2.5/3 PC Cards. - - "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this - driver and its help text includes more information about the Host AP - driver. - - The driver can be compiled as a module and will be named - hostap_cs. diff --git a/drivers/net/wireless/intersil/hostap/Makefile b/drivers/net/wireless/intersil/hostap/Makefile deleted file mode 100644 index ae3bb73b2d..0000000000 --- a/drivers/net/wireless/intersil/hostap/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -hostap-y := hostap_80211_rx.o hostap_80211_tx.o hostap_ap.o hostap_info.o \ - hostap_ioctl.o hostap_main.o hostap_proc.o -obj-$(CONFIG_HOSTAP) += hostap.o - -obj-$(CONFIG_HOSTAP_CS) += hostap_cs.o -obj-$(CONFIG_HOSTAP_PLX) += hostap_plx.o -obj-$(CONFIG_HOSTAP_PCI) += hostap_pci.o diff --git a/drivers/net/wireless/intersil/hostap/hostap.h b/drivers/net/wireless/intersil/hostap/hostap.h deleted file mode 100644 index 552ae33d78..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap.h +++ /dev/null @@ -1,98 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef HOSTAP_H -#define HOSTAP_H - -#include <linux/ethtool.h> -#include <linux/kernel.h> - -#include "hostap_wlan.h" -#include "hostap_ap.h" - -static const long __maybe_unused freq_list[] = { - 2412, 2417, 2422, 2427, 2432, 2437, 2442, - 2447, 2452, 2457, 2462, 2467, 2472, 2484 -}; -#define FREQ_COUNT ARRAY_SIZE(freq_list) - -/* hostap.c */ - -extern struct proc_dir_entry *hostap_proc; - -u16 hostap_tx_callback_register(local_info_t *local, - void (*func)(struct sk_buff *, int ok, void *), - void *data); -int hostap_tx_callback_unregister(local_info_t *local, u16 idx); -int hostap_set_word(struct net_device *dev, int rid, u16 val); -int hostap_set_string(struct net_device *dev, int rid, const char *val); -u16 hostap_get_porttype(local_info_t *local); -int hostap_set_encryption(local_info_t *local); -int hostap_set_antsel(local_info_t *local); -int hostap_set_roaming(local_info_t *local); -int hostap_set_auth_algs(local_info_t *local); -void hostap_dump_rx_header(const char *name, - const struct hfa384x_rx_frame *rx); -void hostap_dump_tx_header(const char *name, - const struct hfa384x_tx_frame *tx); -extern const struct header_ops hostap_80211_ops; -int hostap_80211_get_hdrlen(__le16 fc); -struct net_device_stats *hostap_get_stats(struct net_device *dev); -void hostap_setup_dev(struct net_device *dev, local_info_t *local, - int type); -void hostap_set_multicast_list_queue(struct work_struct *work); -int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked); -int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked); -void hostap_cleanup(local_info_t *local); -void hostap_cleanup_handler(void *data); -struct net_device * hostap_add_interface(struct local_info *local, - int type, int rtnl_locked, - const char *prefix, const char *name); -void hostap_remove_interface(struct net_device *dev, int rtnl_locked, - int remove_from_list); -int prism2_update_comms_qual(struct net_device *dev); -int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype, - u8 *body, size_t bodylen); -int prism2_sta_deauth(local_info_t *local, u16 reason); -int prism2_wds_add(local_info_t *local, u8 *remote_addr, - int rtnl_locked); -int prism2_wds_del(local_info_t *local, u8 *remote_addr, - int rtnl_locked, int do_not_remove); - - -/* hostap_ap.c */ - -int ap_control_add_mac(struct mac_restrictions *mac_restrictions, u8 *mac); -int ap_control_del_mac(struct mac_restrictions *mac_restrictions, u8 *mac); -void ap_control_flush_macs(struct mac_restrictions *mac_restrictions); -int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, u8 *mac); -void ap_control_kickall(struct ap_data *ap); -void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, - struct lib80211_crypt_data ***crypt); -int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], - struct iw_quality qual[], int buf_size, - int aplist); -int prism2_ap_translate_scan(struct net_device *dev, - struct iw_request_info *info, char *buffer); -int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param); - - -/* hostap_proc.c */ - -void hostap_init_proc(local_info_t *local); -void hostap_remove_proc(local_info_t *local); - - -/* hostap_info.c */ - -void hostap_info_init(local_info_t *local); -void hostap_info_process(local_info_t *local, struct sk_buff *skb); - - -/* hostap_ioctl.c */ - -extern const struct iw_handler_def hostap_iw_handler_def; -extern const struct ethtool_ops prism2_ethtool_ops; - -int hostap_siocdevprivate(struct net_device *dev, struct ifreq *ifr, - void __user *data, int cmd); - -#endif /* HOSTAP_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_80211.h b/drivers/net/wireless/intersil/hostap/hostap_80211.h deleted file mode 100644 index 1452cf6ecb..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_80211.h +++ /dev/null @@ -1,97 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef HOSTAP_80211_H -#define HOSTAP_80211_H - -#include <linux/types.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> - -struct hostap_ieee80211_mgmt { - __le16 frame_control; - __le16 duration; - u8 da[6]; - u8 sa[6]; - u8 bssid[6]; - __le16 seq_ctrl; - union { - struct { - __le16 auth_alg; - __le16 auth_transaction; - __le16 status_code; - /* possibly followed by Challenge text */ - u8 variable[0]; - } __packed auth; - struct { - __le16 reason_code; - } __packed deauth; - struct { - __le16 capab_info; - __le16 listen_interval; - /* followed by SSID and Supported rates */ - u8 variable[0]; - } __packed assoc_req; - struct { - __le16 capab_info; - __le16 status_code; - __le16 aid; - /* followed by Supported rates */ - u8 variable[0]; - } __packed assoc_resp, reassoc_resp; - struct { - __le16 capab_info; - __le16 listen_interval; - u8 current_ap[6]; - /* followed by SSID and Supported rates */ - u8 variable[0]; - } __packed reassoc_req; - struct { - __le16 reason_code; - } __packed disassoc; - struct { - } __packed probe_req; - struct { - u8 timestamp[8]; - __le16 beacon_int; - __le16 capab_info; - /* followed by some of SSID, Supported rates, - * FH Params, DS Params, CF Params, IBSS Params, TIM */ - u8 variable[0]; - } __packed beacon, probe_resp; - } u; -} __packed; - - -#define IEEE80211_MGMT_HDR_LEN 24 -#define IEEE80211_DATA_HDR3_LEN 24 -#define IEEE80211_DATA_HDR4_LEN 30 - - -struct hostap_80211_rx_status { - u32 mac_time; - u8 signal; - u8 noise; - u16 rate; /* in 100 kbps */ -}; - -/* prism2_rx_80211 'type' argument */ -enum { - PRISM2_RX_MONITOR, PRISM2_RX_MGMT, PRISM2_RX_NON_ASSOC, - PRISM2_RX_NULLFUNC_ACK -}; - -int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats, int type); -void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats); -void hostap_dump_rx_80211(const char *name, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats); - -void hostap_dump_tx_80211(const char *name, struct sk_buff *skb); -netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb, - struct net_device *dev); -netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb, - struct net_device *dev); -netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb, - struct net_device *dev); - -#endif /* HOSTAP_80211_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c b/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c deleted file mode 100644 index 61be822f90..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c +++ /dev/null @@ -1,1116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/etherdevice.h> -#include <linux/slab.h> -#include <linux/export.h> -#include <net/lib80211.h> -#include <linux/if_arp.h> - -#include "hostap_80211.h" -#include "hostap.h" -#include "hostap_ap.h" - -/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ -/* Ethernet-II snap header (RFC1042 for most EtherTypes) */ -static unsigned char rfc1042_header[] = -{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; -/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ -static unsigned char bridge_tunnel_header[] = -{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; -/* No encapsulation header if EtherType < 0x600 (=length) */ - -void hostap_dump_rx_80211(const char *name, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats) -{ - struct ieee80211_hdr *hdr; - u16 fc; - - hdr = (struct ieee80211_hdr *) skb->data; - - printk(KERN_DEBUG "%s: RX signal=%d noise=%d rate=%d len=%d " - "jiffies=%ld\n", - name, rx_stats->signal, rx_stats->noise, rx_stats->rate, - skb->len, jiffies); - - if (skb->len < 2) - return; - - fc = le16_to_cpu(hdr->frame_control); - printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s", - fc, (fc & IEEE80211_FCTL_FTYPE) >> 2, - (fc & IEEE80211_FCTL_STYPE) >> 4, - fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", - fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); - - if (skb->len < IEEE80211_DATA_HDR3_LEN) { - printk("\n"); - return; - } - - printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id), - le16_to_cpu(hdr->seq_ctrl)); - - printk(KERN_DEBUG " A1=%pM", hdr->addr1); - printk(" A2=%pM", hdr->addr2); - printk(" A3=%pM", hdr->addr3); - if (skb->len >= 30) - printk(" A4=%pM", hdr->addr4); - printk("\n"); -} - - -/* Send RX frame to netif with 802.11 (and possible prism) header. - * Called from hardware or software IRQ context. */ -int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats, int type) -{ - struct hostap_interface *iface; - local_info_t *local; - int hdrlen, phdrlen, head_need, tail_need; - u16 fc; - int prism_header, ret; - struct ieee80211_hdr *fhdr; - - iface = netdev_priv(dev); - local = iface->local; - - if (dev->type == ARPHRD_IEEE80211_PRISM) { - if (local->monitor_type == PRISM2_MONITOR_PRISM) { - prism_header = 1; - phdrlen = sizeof(struct linux_wlan_ng_prism_hdr); - } else { /* local->monitor_type == PRISM2_MONITOR_CAPHDR */ - prism_header = 2; - phdrlen = sizeof(struct linux_wlan_ng_cap_hdr); - } - } else if (dev->type == ARPHRD_IEEE80211_RADIOTAP) { - prism_header = 3; - phdrlen = sizeof(struct hostap_radiotap_rx); - } else { - prism_header = 0; - phdrlen = 0; - } - - fhdr = (struct ieee80211_hdr *) skb->data; - fc = le16_to_cpu(fhdr->frame_control); - - if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) { - printk(KERN_DEBUG "%s: dropped management frame with header " - "version %d\n", dev->name, fc & IEEE80211_FCTL_VERS); - dev_kfree_skb_any(skb); - return 0; - } - - hdrlen = hostap_80211_get_hdrlen(fhdr->frame_control); - - /* check if there is enough room for extra data; if not, expand skb - * buffer to be large enough for the changes */ - head_need = phdrlen; - tail_need = 0; -#ifdef PRISM2_ADD_BOGUS_CRC - tail_need += 4; -#endif /* PRISM2_ADD_BOGUS_CRC */ - - head_need -= skb_headroom(skb); - tail_need -= skb_tailroom(skb); - - if (head_need > 0 || tail_need > 0) { - if (pskb_expand_head(skb, head_need > 0 ? head_need : 0, - tail_need > 0 ? tail_need : 0, - GFP_ATOMIC)) { - printk(KERN_DEBUG "%s: prism2_rx_80211 failed to " - "reallocate skb buffer\n", dev->name); - dev_kfree_skb_any(skb); - return 0; - } - } - - /* We now have an skb with enough head and tail room, so just insert - * the extra data */ - -#ifdef PRISM2_ADD_BOGUS_CRC - memset(skb_put(skb, 4), 0xff, 4); /* Prism2 strips CRC */ -#endif /* PRISM2_ADD_BOGUS_CRC */ - - if (prism_header == 1) { - struct linux_wlan_ng_prism_hdr *hdr; - hdr = skb_push(skb, phdrlen); - memset(hdr, 0, phdrlen); - hdr->msgcode = LWNG_CAP_DID_BASE; - hdr->msglen = sizeof(*hdr); - memcpy(hdr->devname, dev->name, sizeof(hdr->devname)); -#define LWNG_SETVAL(f,i,s,l,d) \ -hdr->f.did = LWNG_CAP_DID_BASE | (i << 12); \ -hdr->f.status = s; hdr->f.len = l; hdr->f.data = d - LWNG_SETVAL(hosttime, 1, 0, 4, jiffies); - LWNG_SETVAL(mactime, 2, 0, 4, rx_stats->mac_time); - LWNG_SETVAL(channel, 3, 1 /* no value */, 4, 0); - LWNG_SETVAL(rssi, 4, 1 /* no value */, 4, 0); - LWNG_SETVAL(sq, 5, 1 /* no value */, 4, 0); - LWNG_SETVAL(signal, 6, 0, 4, rx_stats->signal); - LWNG_SETVAL(noise, 7, 0, 4, rx_stats->noise); - LWNG_SETVAL(rate, 8, 0, 4, rx_stats->rate / 5); - LWNG_SETVAL(istx, 9, 0, 4, 0); - LWNG_SETVAL(frmlen, 10, 0, 4, skb->len - phdrlen); -#undef LWNG_SETVAL - } else if (prism_header == 2) { - struct linux_wlan_ng_cap_hdr *hdr; - hdr = skb_push(skb, phdrlen); - memset(hdr, 0, phdrlen); - hdr->version = htonl(LWNG_CAPHDR_VERSION); - hdr->length = htonl(phdrlen); - hdr->mactime = __cpu_to_be64(rx_stats->mac_time); - hdr->hosttime = __cpu_to_be64(jiffies); - hdr->phytype = htonl(4); /* dss_dot11_b */ - hdr->channel = htonl(local->channel); - hdr->datarate = htonl(rx_stats->rate); - hdr->antenna = htonl(0); /* unknown */ - hdr->priority = htonl(0); /* unknown */ - hdr->ssi_type = htonl(3); /* raw */ - hdr->ssi_signal = htonl(rx_stats->signal); - hdr->ssi_noise = htonl(rx_stats->noise); - hdr->preamble = htonl(0); /* unknown */ - hdr->encoding = htonl(1); /* cck */ - } else if (prism_header == 3) { - struct hostap_radiotap_rx *hdr; - hdr = skb_push(skb, phdrlen); - memset(hdr, 0, phdrlen); - hdr->hdr.it_len = cpu_to_le16(phdrlen); - hdr->hdr.it_present = - cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) | - (1 << IEEE80211_RADIOTAP_CHANNEL) | - (1 << IEEE80211_RADIOTAP_RATE) | - (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE)); - hdr->tsft = cpu_to_le64(rx_stats->mac_time); - hdr->chan_freq = cpu_to_le16(freq_list[local->channel - 1]); - hdr->chan_flags = cpu_to_le16(IEEE80211_CHAN_CCK | - IEEE80211_CHAN_2GHZ); - hdr->rate = rx_stats->rate / 5; - hdr->dbm_antsignal = rx_stats->signal; - hdr->dbm_antnoise = rx_stats->noise; - } - - ret = skb->len - phdrlen; - skb->dev = dev; - skb_reset_mac_header(skb); - skb_pull(skb, hdrlen); - if (prism_header) - skb_pull(skb, phdrlen); - skb->pkt_type = PACKET_OTHERHOST; - skb->protocol = cpu_to_be16(ETH_P_802_2); - memset(skb->cb, 0, sizeof(skb->cb)); - netif_rx(skb); - - return ret; -} - - -/* Called only as a tasklet (software IRQ) */ -static void monitor_rx(struct net_device *dev, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats) -{ - int len; - - len = prism2_rx_80211(dev, skb, rx_stats, PRISM2_RX_MONITOR); - dev->stats.rx_packets++; - dev->stats.rx_bytes += len; -} - - -/* Called only as a tasklet (software IRQ) */ -static struct prism2_frag_entry * -prism2_frag_cache_find(local_info_t *local, unsigned int seq, - unsigned int frag, u8 *src, u8 *dst) -{ - struct prism2_frag_entry *entry; - int i; - - for (i = 0; i < PRISM2_FRAG_CACHE_LEN; i++) { - entry = &local->frag_cache[i]; - if (entry->skb != NULL && - time_after(jiffies, entry->first_frag_time + 2 * HZ)) { - printk(KERN_DEBUG "%s: expiring fragment cache entry " - "seq=%u last_frag=%u\n", - local->dev->name, entry->seq, entry->last_frag); - dev_kfree_skb(entry->skb); - entry->skb = NULL; - } - - if (entry->skb != NULL && entry->seq == seq && - (entry->last_frag + 1 == frag || frag == -1) && - memcmp(entry->src_addr, src, ETH_ALEN) == 0 && - memcmp(entry->dst_addr, dst, ETH_ALEN) == 0) - return entry; - } - - return NULL; -} - - -/* Called only as a tasklet (software IRQ) */ -static struct sk_buff * -prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr) -{ - struct sk_buff *skb = NULL; - u16 sc; - unsigned int frag, seq; - struct prism2_frag_entry *entry; - - sc = le16_to_cpu(hdr->seq_ctrl); - frag = sc & IEEE80211_SCTL_FRAG; - seq = (sc & IEEE80211_SCTL_SEQ) >> 4; - - if (frag == 0) { - /* Reserve enough space to fit maximum frame length */ - skb = dev_alloc_skb(local->dev->mtu + - sizeof(struct ieee80211_hdr) + - 8 /* LLC */ + - 2 /* alignment */ + - 8 /* WEP */ + ETH_ALEN /* WDS */); - if (skb == NULL) - return NULL; - - entry = &local->frag_cache[local->frag_next_idx]; - local->frag_next_idx++; - if (local->frag_next_idx >= PRISM2_FRAG_CACHE_LEN) - local->frag_next_idx = 0; - - if (entry->skb != NULL) - dev_kfree_skb(entry->skb); - - entry->first_frag_time = jiffies; - entry->seq = seq; - entry->last_frag = frag; - entry->skb = skb; - memcpy(entry->src_addr, hdr->addr2, ETH_ALEN); - memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN); - } else { - /* received a fragment of a frame for which the head fragment - * should have already been received */ - entry = prism2_frag_cache_find(local, seq, frag, hdr->addr2, - hdr->addr1); - if (entry != NULL) { - entry->last_frag = frag; - skb = entry->skb; - } - } - - return skb; -} - - -/* Called only as a tasklet (software IRQ) */ -static int prism2_frag_cache_invalidate(local_info_t *local, - struct ieee80211_hdr *hdr) -{ - u16 sc; - unsigned int seq; - struct prism2_frag_entry *entry; - - sc = le16_to_cpu(hdr->seq_ctrl); - seq = (sc & IEEE80211_SCTL_SEQ) >> 4; - - entry = prism2_frag_cache_find(local, seq, -1, hdr->addr2, hdr->addr1); - - if (entry == NULL) { - printk(KERN_DEBUG "%s: could not invalidate fragment cache " - "entry (seq=%u)\n", - local->dev->name, seq); - return -1; - } - - entry->skb = NULL; - return 0; -} - - -static struct hostap_bss_info *__hostap_get_bss(local_info_t *local, u8 *bssid, - u8 *ssid, size_t ssid_len) -{ - struct list_head *ptr; - struct hostap_bss_info *bss; - - list_for_each(ptr, &local->bss_list) { - bss = list_entry(ptr, struct hostap_bss_info, list); - if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0 && - (ssid == NULL || - (ssid_len == bss->ssid_len && - memcmp(ssid, bss->ssid, ssid_len) == 0))) { - list_move(&bss->list, &local->bss_list); - return bss; - } - } - - return NULL; -} - - -static struct hostap_bss_info *__hostap_add_bss(local_info_t *local, u8 *bssid, - u8 *ssid, size_t ssid_len) -{ - struct hostap_bss_info *bss; - - if (local->num_bss_info >= HOSTAP_MAX_BSS_COUNT) { - bss = list_entry(local->bss_list.prev, - struct hostap_bss_info, list); - list_del(&bss->list); - local->num_bss_info--; - } else { - bss = kmalloc(sizeof(*bss), GFP_ATOMIC); - if (bss == NULL) - return NULL; - } - - memset(bss, 0, sizeof(*bss)); - memcpy(bss->bssid, bssid, ETH_ALEN); - memcpy(bss->ssid, ssid, ssid_len); - bss->ssid_len = ssid_len; - local->num_bss_info++; - list_add(&bss->list, &local->bss_list); - return bss; -} - - -static void __hostap_expire_bss(local_info_t *local) -{ - struct hostap_bss_info *bss; - - while (local->num_bss_info > 0) { - bss = list_entry(local->bss_list.prev, - struct hostap_bss_info, list); - if (!time_after(jiffies, bss->last_update + 60 * HZ)) - break; - - list_del(&bss->list); - local->num_bss_info--; - kfree(bss); - } -} - - -/* Both IEEE 802.11 Beacon and Probe Response frames have similar structure, so - * the same routine can be used to parse both of them. */ -static void hostap_rx_sta_beacon(local_info_t *local, struct sk_buff *skb, - int stype) -{ - struct hostap_ieee80211_mgmt *mgmt; - int left, chan = 0; - u8 *pos; - u8 *ssid = NULL, *wpa = NULL, *rsn = NULL; - size_t ssid_len = 0, wpa_len = 0, rsn_len = 0; - struct hostap_bss_info *bss; - - if (skb->len < IEEE80211_MGMT_HDR_LEN + sizeof(mgmt->u.beacon)) - return; - - mgmt = (struct hostap_ieee80211_mgmt *) skb->data; - pos = mgmt->u.beacon.variable; - left = skb->len - (pos - skb->data); - - while (left >= 2) { - if (2 + pos[1] > left) - return; /* parse failed */ - switch (*pos) { - case WLAN_EID_SSID: - ssid = pos + 2; - ssid_len = pos[1]; - break; - case WLAN_EID_VENDOR_SPECIFIC: - if (pos[1] >= 4 && - pos[2] == 0x00 && pos[3] == 0x50 && - pos[4] == 0xf2 && pos[5] == 1) { - wpa = pos; - wpa_len = pos[1] + 2; - } - break; - case WLAN_EID_RSN: - rsn = pos; - rsn_len = pos[1] + 2; - break; - case WLAN_EID_DS_PARAMS: - if (pos[1] >= 1) - chan = pos[2]; - break; - } - left -= 2 + pos[1]; - pos += 2 + pos[1]; - } - - if (wpa_len > MAX_WPA_IE_LEN) - wpa_len = MAX_WPA_IE_LEN; - if (rsn_len > MAX_WPA_IE_LEN) - rsn_len = MAX_WPA_IE_LEN; - if (ssid_len > sizeof(bss->ssid)) - ssid_len = sizeof(bss->ssid); - - spin_lock(&local->lock); - bss = __hostap_get_bss(local, mgmt->bssid, ssid, ssid_len); - if (bss == NULL) - bss = __hostap_add_bss(local, mgmt->bssid, ssid, ssid_len); - if (bss) { - bss->last_update = jiffies; - bss->count++; - bss->capab_info = le16_to_cpu(mgmt->u.beacon.capab_info); - if (wpa) { - memcpy(bss->wpa_ie, wpa, wpa_len); - bss->wpa_ie_len = wpa_len; - } else - bss->wpa_ie_len = 0; - if (rsn) { - memcpy(bss->rsn_ie, rsn, rsn_len); - bss->rsn_ie_len = rsn_len; - } else - bss->rsn_ie_len = 0; - bss->chan = chan; - } - __hostap_expire_bss(local); - spin_unlock(&local->lock); -} - - -static int -hostap_rx_frame_mgmt(local_info_t *local, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats, u16 type, - u16 stype) -{ - if (local->iw_mode == IW_MODE_MASTER) - hostap_update_sta_ps(local, (struct ieee80211_hdr *) skb->data); - - if (local->hostapd && type == IEEE80211_FTYPE_MGMT) { - if (stype == IEEE80211_STYPE_BEACON && - local->iw_mode == IW_MODE_MASTER) { - struct sk_buff *skb2; - /* Process beacon frames also in kernel driver to - * update STA(AP) table statistics */ - skb2 = skb_clone(skb, GFP_ATOMIC); - if (skb2) - hostap_rx(skb2->dev, skb2, rx_stats); - } - - /* send management frames to the user space daemon for - * processing */ - local->apdevstats.rx_packets++; - local->apdevstats.rx_bytes += skb->len; - if (local->apdev == NULL) - return -1; - prism2_rx_80211(local->apdev, skb, rx_stats, PRISM2_RX_MGMT); - return 0; - } - - if (local->iw_mode == IW_MODE_MASTER) { - if (type != IEEE80211_FTYPE_MGMT && - type != IEEE80211_FTYPE_CTL) { - printk(KERN_DEBUG "%s: unknown management frame " - "(type=0x%02x, stype=0x%02x) dropped\n", - skb->dev->name, type >> 2, stype >> 4); - return -1; - } - - hostap_rx(skb->dev, skb, rx_stats); - return 0; - } else if (type == IEEE80211_FTYPE_MGMT && - (stype == IEEE80211_STYPE_BEACON || - stype == IEEE80211_STYPE_PROBE_RESP)) { - hostap_rx_sta_beacon(local, skb, stype); - return -1; - } else if (type == IEEE80211_FTYPE_MGMT && - (stype == IEEE80211_STYPE_ASSOC_RESP || - stype == IEEE80211_STYPE_REASSOC_RESP)) { - /* Ignore (Re)AssocResp silently since these are not currently - * needed but are still received when WPA/RSN mode is enabled. - */ - return -1; - } else { - printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: dropped unhandled" - " management frame in non-Host AP mode (type=%d:%d)\n", - skb->dev->name, type >> 2, stype >> 4); - return -1; - } -} - - -/* Called only as a tasklet (software IRQ) */ -static struct net_device *prism2_rx_get_wds(local_info_t *local, - u8 *addr) -{ - struct hostap_interface *iface = NULL; - struct list_head *ptr; - - read_lock_bh(&local->iface_lock); - list_for_each(ptr, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - if (iface->type == HOSTAP_INTERFACE_WDS && - memcmp(iface->u.wds.remote_addr, addr, ETH_ALEN) == 0) - break; - iface = NULL; - } - read_unlock_bh(&local->iface_lock); - - return iface ? iface->dev : NULL; -} - - -static int -hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr *hdr, u16 fc, - struct net_device **wds) -{ - /* FIX: is this really supposed to accept WDS frames only in Master - * mode? What about Repeater or Managed with WDS frames? */ - if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) != - (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS) && - (local->iw_mode != IW_MODE_MASTER || !(fc & IEEE80211_FCTL_TODS))) - return 0; /* not a WDS frame */ - - /* Possible WDS frame: either IEEE 802.11 compliant (if FromDS) - * or own non-standard frame with 4th address after payload */ - if (!ether_addr_equal(hdr->addr1, local->dev->dev_addr) && - (hdr->addr1[0] != 0xff || hdr->addr1[1] != 0xff || - hdr->addr1[2] != 0xff || hdr->addr1[3] != 0xff || - hdr->addr1[4] != 0xff || hdr->addr1[5] != 0xff)) { - /* RA (or BSSID) is not ours - drop */ - PDEBUG(DEBUG_EXTRA2, "%s: received WDS frame with " - "not own or broadcast %s=%pM\n", - local->dev->name, - fc & IEEE80211_FCTL_FROMDS ? "RA" : "BSSID", - hdr->addr1); - return -1; - } - - /* check if the frame came from a registered WDS connection */ - *wds = prism2_rx_get_wds(local, hdr->addr2); - if (*wds == NULL && fc & IEEE80211_FCTL_FROMDS && - (local->iw_mode != IW_MODE_INFRA || - !(local->wds_type & HOSTAP_WDS_AP_CLIENT) || - memcmp(hdr->addr2, local->bssid, ETH_ALEN) != 0)) { - /* require that WDS link has been registered with TA or the - * frame is from current AP when using 'AP client mode' */ - PDEBUG(DEBUG_EXTRA, "%s: received WDS[4 addr] frame " - "from unknown TA=%pM\n", - local->dev->name, hdr->addr2); - if (local->ap && local->ap->autom_ap_wds) - hostap_wds_link_oper(local, hdr->addr2, WDS_ADD); - return -1; - } - - if (*wds && !(fc & IEEE80211_FCTL_FROMDS) && local->ap && - hostap_is_sta_assoc(local->ap, hdr->addr2)) { - /* STA is actually associated with us even though it has a - * registered WDS link. Assume it is in 'AP client' mode. - * Since this is a 3-addr frame, assume it is not (bogus) WDS - * frame and process it like any normal ToDS frame from - * associated STA. */ - *wds = NULL; - } - - return 0; -} - - -static int hostap_is_eapol_frame(local_info_t *local, struct sk_buff *skb) -{ - struct net_device *dev = local->dev; - u16 fc, ethertype; - struct ieee80211_hdr *hdr; - u8 *pos; - - if (skb->len < 24) - return 0; - - hdr = (struct ieee80211_hdr *) skb->data; - fc = le16_to_cpu(hdr->frame_control); - - /* check that the frame is unicast frame to us */ - if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == - IEEE80211_FCTL_TODS && - ether_addr_equal(hdr->addr1, dev->dev_addr) && - ether_addr_equal(hdr->addr3, dev->dev_addr)) { - /* ToDS frame with own addr BSSID and DA */ - } else if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == - IEEE80211_FCTL_FROMDS && - ether_addr_equal(hdr->addr1, dev->dev_addr)) { - /* FromDS frame with own addr as DA */ - } else - return 0; - - if (skb->len < 24 + 8) - return 0; - - /* check for port access entity Ethernet type */ - pos = skb->data + 24; - ethertype = (pos[6] << 8) | pos[7]; - if (ethertype == ETH_P_PAE) - return 1; - - return 0; -} - - -/* Called only as a tasklet (software IRQ) */ -static int -hostap_rx_frame_decrypt(local_info_t *local, struct sk_buff *skb, - struct lib80211_crypt_data *crypt) -{ - struct ieee80211_hdr *hdr; - int res, hdrlen; - - if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL) - return 0; - - hdr = (struct ieee80211_hdr *) skb->data; - hdrlen = hostap_80211_get_hdrlen(hdr->frame_control); - - if (local->tkip_countermeasures && - strcmp(crypt->ops->name, "TKIP") == 0) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " - "received packet from %pM\n", - local->dev->name, hdr->addr2); - } - return -1; - } - - atomic_inc(&crypt->refcnt); - res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv); - atomic_dec(&crypt->refcnt); - if (res < 0) { - printk(KERN_DEBUG "%s: decryption failed (SA=%pM) res=%d\n", - local->dev->name, hdr->addr2, res); - local->comm_tallies.rx_discards_wep_undecryptable++; - return -1; - } - - return res; -} - - -/* Called only as a tasklet (software IRQ) */ -static int -hostap_rx_frame_decrypt_msdu(local_info_t *local, struct sk_buff *skb, - int keyidx, struct lib80211_crypt_data *crypt) -{ - struct ieee80211_hdr *hdr; - int res, hdrlen; - - if (crypt == NULL || crypt->ops->decrypt_msdu == NULL) - return 0; - - hdr = (struct ieee80211_hdr *) skb->data; - hdrlen = hostap_80211_get_hdrlen(hdr->frame_control); - - atomic_inc(&crypt->refcnt); - res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv); - atomic_dec(&crypt->refcnt); - if (res < 0) { - printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed" - " (SA=%pM keyidx=%d)\n", - local->dev->name, hdr->addr2, keyidx); - return -1; - } - - return 0; -} - - -/* All received frames are sent to this function. @skb contains the frame in - * IEEE 802.11 format, i.e., in the format it was sent over air. - * This function is called only as a tasklet (software IRQ). */ -void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats) -{ - struct hostap_interface *iface; - local_info_t *local; - struct ieee80211_hdr *hdr; - size_t hdrlen; - u16 fc, type, stype, sc; - struct net_device *wds = NULL; - unsigned int frag; - u8 *payload; - struct sk_buff *skb2 = NULL; - u16 ethertype; - int frame_authorized = 0; - int from_assoc_ap = 0; - u8 dst[ETH_ALEN]; - u8 src[ETH_ALEN]; - struct lib80211_crypt_data *crypt = NULL; - void *sta = NULL; - int keyidx = 0; - - iface = netdev_priv(dev); - local = iface->local; - iface->stats.rx_packets++; - iface->stats.rx_bytes += skb->len; - - /* dev is the master radio device; change this to be the default - * virtual interface (this may be changed to WDS device below) */ - dev = local->ddev; - iface = netdev_priv(dev); - - hdr = (struct ieee80211_hdr *) skb->data; - - if (skb->len < 10) - goto rx_dropped; - - fc = le16_to_cpu(hdr->frame_control); - type = fc & IEEE80211_FCTL_FTYPE; - stype = fc & IEEE80211_FCTL_STYPE; - sc = le16_to_cpu(hdr->seq_ctrl); - frag = sc & IEEE80211_SCTL_FRAG; - hdrlen = hostap_80211_get_hdrlen(hdr->frame_control); - - /* Put this code here so that we avoid duplicating it in all - * Rx paths. - Jean II */ -#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */ - /* If spy monitoring on */ - if (iface->spy_data.spy_number > 0) { - struct iw_quality wstats; - wstats.level = rx_stats->signal; - wstats.noise = rx_stats->noise; - wstats.updated = IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_UPDATED - | IW_QUAL_QUAL_INVALID | IW_QUAL_DBM; - /* Update spy records */ - wireless_spy_update(dev, hdr->addr2, &wstats); - } -#endif /* IW_WIRELESS_SPY */ - hostap_update_rx_stats(local->ap, hdr, rx_stats); - - if (local->iw_mode == IW_MODE_MONITOR) { - monitor_rx(dev, skb, rx_stats); - return; - } - - if (local->host_decrypt) { - int idx = 0; - if (skb->len >= hdrlen + 3) - idx = skb->data[hdrlen + 3] >> 6; - crypt = local->crypt_info.crypt[idx]; - sta = NULL; - - /* Use station specific key to override default keys if the - * receiver address is a unicast address ("individual RA"). If - * bcrx_sta_key parameter is set, station specific key is used - * even with broad/multicast targets (this is against IEEE - * 802.11, but makes it easier to use different keys with - * stations that do not support WEP key mapping). */ - - if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key) - (void) hostap_handle_sta_crypto(local, hdr, &crypt, - &sta); - - /* allow NULL decrypt to indicate an station specific override - * for default encryption */ - if (crypt && (crypt->ops == NULL || - crypt->ops->decrypt_mpdu == NULL)) - crypt = NULL; - - if (!crypt && (fc & IEEE80211_FCTL_PROTECTED)) { -#if 0 - /* This seems to be triggered by some (multicast?) - * frames from other than current BSS, so just drop the - * frames silently instead of filling system log with - * these reports. */ - printk(KERN_DEBUG "%s: WEP decryption failed (not set)" - " (SA=%pM)\n", - local->dev->name, hdr->addr2); -#endif - local->comm_tallies.rx_discards_wep_undecryptable++; - goto rx_dropped; - } - } - - if (type != IEEE80211_FTYPE_DATA) { - if (type == IEEE80211_FTYPE_MGMT && - stype == IEEE80211_STYPE_AUTH && - fc & IEEE80211_FCTL_PROTECTED && local->host_decrypt && - (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0) - { - printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth " - "from %pM\n", dev->name, hdr->addr2); - /* TODO: could inform hostapd about this so that it - * could send auth failure report */ - goto rx_dropped; - } - - if (hostap_rx_frame_mgmt(local, skb, rx_stats, type, stype)) - goto rx_dropped; - else - goto rx_exit; - } - - /* Data frame - extract src/dst addresses */ - if (skb->len < IEEE80211_DATA_HDR3_LEN) - goto rx_dropped; - - switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) { - case IEEE80211_FCTL_FROMDS: - memcpy(dst, hdr->addr1, ETH_ALEN); - memcpy(src, hdr->addr3, ETH_ALEN); - break; - case IEEE80211_FCTL_TODS: - memcpy(dst, hdr->addr3, ETH_ALEN); - memcpy(src, hdr->addr2, ETH_ALEN); - break; - case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS: - if (skb->len < IEEE80211_DATA_HDR4_LEN) - goto rx_dropped; - memcpy(dst, hdr->addr3, ETH_ALEN); - memcpy(src, hdr->addr4, ETH_ALEN); - break; - default: - memcpy(dst, hdr->addr1, ETH_ALEN); - memcpy(src, hdr->addr2, ETH_ALEN); - break; - } - - if (hostap_rx_frame_wds(local, hdr, fc, &wds)) - goto rx_dropped; - if (wds) - skb->dev = dev = wds; - - if (local->iw_mode == IW_MODE_MASTER && !wds && - (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == - IEEE80211_FCTL_FROMDS && - local->stadev && - memcmp(hdr->addr2, local->assoc_ap_addr, ETH_ALEN) == 0) { - /* Frame from BSSID of the AP for which we are a client */ - skb->dev = dev = local->stadev; - from_assoc_ap = 1; - } - - if ((local->iw_mode == IW_MODE_MASTER || - local->iw_mode == IW_MODE_REPEAT) && - !from_assoc_ap) { - switch (hostap_handle_sta_rx(local, dev, skb, rx_stats, - wds != NULL)) { - case AP_RX_CONTINUE_NOT_AUTHORIZED: - frame_authorized = 0; - break; - case AP_RX_CONTINUE: - frame_authorized = 1; - break; - case AP_RX_DROP: - goto rx_dropped; - case AP_RX_EXIT: - goto rx_exit; - } - } - - /* Nullfunc frames may have PS-bit set, so they must be passed to - * hostap_handle_sta_rx() before being dropped here. */ - if (stype != IEEE80211_STYPE_DATA && - stype != IEEE80211_STYPE_DATA_CFACK && - stype != IEEE80211_STYPE_DATA_CFPOLL && - stype != IEEE80211_STYPE_DATA_CFACKPOLL) { - if (stype != IEEE80211_STYPE_NULLFUNC) - printk(KERN_DEBUG "%s: RX: dropped data frame " - "with no data (type=0x%02x, subtype=0x%02x)\n", - dev->name, type >> 2, stype >> 4); - goto rx_dropped; - } - - /* skb: hdr + (possibly fragmented, possibly encrypted) payload */ - - if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && - (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0) - goto rx_dropped; - hdr = (struct ieee80211_hdr *) skb->data; - - /* skb: hdr + (possibly fragmented) plaintext payload */ - - if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && - (frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) { - int flen; - struct sk_buff *frag_skb = - prism2_frag_cache_get(local, hdr); - if (!frag_skb) { - printk(KERN_DEBUG "%s: Rx cannot get skb from " - "fragment cache (morefrag=%d seq=%u frag=%u)\n", - dev->name, (fc & IEEE80211_FCTL_MOREFRAGS) != 0, - (sc & IEEE80211_SCTL_SEQ) >> 4, frag); - goto rx_dropped; - } - - flen = skb->len; - if (frag != 0) - flen -= hdrlen; - - if (frag_skb->tail + flen > frag_skb->end) { - printk(KERN_WARNING "%s: host decrypted and " - "reassembled frame did not fit skb\n", - dev->name); - prism2_frag_cache_invalidate(local, hdr); - goto rx_dropped; - } - - if (frag == 0) { - /* copy first fragment (including full headers) into - * beginning of the fragment cache skb */ - skb_copy_from_linear_data(skb, skb_put(frag_skb, flen), - flen); - } else { - /* append frame payload to the end of the fragment - * cache skb */ - skb_copy_from_linear_data_offset(skb, hdrlen, - skb_put(frag_skb, - flen), flen); - } - dev_kfree_skb(skb); - skb = NULL; - - if (fc & IEEE80211_FCTL_MOREFRAGS) { - /* more fragments expected - leave the skb in fragment - * cache for now; it will be delivered to upper layers - * after all fragments have been received */ - goto rx_exit; - } - - /* this was the last fragment and the frame will be - * delivered, so remove skb from fragment cache */ - skb = frag_skb; - hdr = (struct ieee80211_hdr *) skb->data; - prism2_frag_cache_invalidate(local, hdr); - } - - /* skb: hdr + (possible reassembled) full MSDU payload; possibly still - * encrypted/authenticated */ - - if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && - hostap_rx_frame_decrypt_msdu(local, skb, keyidx, crypt)) - goto rx_dropped; - - hdr = (struct ieee80211_hdr *) skb->data; - if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !local->open_wep) { - if (local->ieee_802_1x && - hostap_is_eapol_frame(local, skb)) { - /* pass unencrypted EAPOL frames even if encryption is - * configured */ - PDEBUG(DEBUG_EXTRA2, "%s: RX: IEEE 802.1X - passing " - "unencrypted EAPOL frame\n", local->dev->name); - } else { - printk(KERN_DEBUG "%s: encryption configured, but RX " - "frame not encrypted (SA=%pM)\n", - local->dev->name, hdr->addr2); - goto rx_dropped; - } - } - - if (local->drop_unencrypted && !(fc & IEEE80211_FCTL_PROTECTED) && - !hostap_is_eapol_frame(local, skb)) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: dropped unencrypted RX data " - "frame from %pM (drop_unencrypted=1)\n", - dev->name, hdr->addr2); - } - goto rx_dropped; - } - - /* skb: hdr + (possible reassembled) full plaintext payload */ - - payload = skb->data + hdrlen; - ethertype = (payload[6] << 8) | payload[7]; - - /* If IEEE 802.1X is used, check whether the port is authorized to send - * the received frame. */ - if (local->ieee_802_1x && local->iw_mode == IW_MODE_MASTER) { - if (ethertype == ETH_P_PAE) { - PDEBUG(DEBUG_EXTRA2, "%s: RX: IEEE 802.1X frame\n", - dev->name); - if (local->hostapd && local->apdev) { - /* Send IEEE 802.1X frames to the user - * space daemon for processing */ - prism2_rx_80211(local->apdev, skb, rx_stats, - PRISM2_RX_MGMT); - local->apdevstats.rx_packets++; - local->apdevstats.rx_bytes += skb->len; - goto rx_exit; - } - } else if (!frame_authorized) { - printk(KERN_DEBUG "%s: dropped frame from " - "unauthorized port (IEEE 802.1X): " - "ethertype=0x%04x\n", - dev->name, ethertype); - goto rx_dropped; - } - } - - /* convert hdr + possible LLC headers into Ethernet header */ - if (skb->len - hdrlen >= 8 && - ((memcmp(payload, rfc1042_header, 6) == 0 && - ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || - memcmp(payload, bridge_tunnel_header, 6) == 0)) { - /* remove RFC1042 or Bridge-Tunnel encapsulation and - * replace EtherType */ - skb_pull(skb, hdrlen + 6); - memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); - memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); - } else { - __be16 len; - /* Leave Ethernet header part of hdr and full payload */ - skb_pull(skb, hdrlen); - len = htons(skb->len); - memcpy(skb_push(skb, 2), &len, 2); - memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); - memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); - } - - if (wds && ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == - IEEE80211_FCTL_TODS) && - skb->len >= ETH_HLEN + ETH_ALEN) { - /* Non-standard frame: get addr4 from its bogus location after - * the payload */ - skb_copy_from_linear_data_offset(skb, skb->len - ETH_ALEN, - skb->data + ETH_ALEN, - ETH_ALEN); - skb_trim(skb, skb->len - ETH_ALEN); - } - - dev->stats.rx_packets++; - dev->stats.rx_bytes += skb->len; - - if (local->iw_mode == IW_MODE_MASTER && !wds && - local->ap->bridge_packets) { - if (dst[0] & 0x01) { - /* copy multicast frame both to the higher layers and - * to the wireless media */ - local->ap->bridged_multicast++; - skb2 = skb_clone(skb, GFP_ATOMIC); - if (skb2 == NULL) - printk(KERN_DEBUG "%s: skb_clone failed for " - "multicast frame\n", dev->name); - } else if (hostap_is_sta_authorized(local->ap, dst)) { - /* send frame directly to the associated STA using - * wireless media and not passing to higher layers */ - local->ap->bridged_unicast++; - skb2 = skb; - skb = NULL; - } - } - - if (skb2 != NULL) { - /* send to wireless media */ - skb2->dev = dev; - skb2->protocol = cpu_to_be16(ETH_P_802_3); - skb_reset_mac_header(skb2); - skb_reset_network_header(skb2); - /* skb2->network_header += ETH_HLEN; */ - dev_queue_xmit(skb2); - } - - if (skb) { - skb->protocol = eth_type_trans(skb, dev); - memset(skb->cb, 0, sizeof(skb->cb)); - netif_rx(skb); - } - - rx_exit: - if (sta) - hostap_handle_sta_release(sta); - return; - - rx_dropped: - dev_kfree_skb(skb); - - dev->stats.rx_dropped++; - goto rx_exit; -} - - -EXPORT_SYMBOL(hostap_80211_rx); diff --git a/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c b/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c deleted file mode 100644 index c47da06945..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c +++ /dev/null @@ -1,554 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/slab.h> -#include <linux/export.h> -#include <linux/etherdevice.h> - -#include "hostap_80211.h" -#include "hostap_common.h" -#include "hostap_wlan.h" -#include "hostap.h" -#include "hostap_ap.h" - -/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ -/* Ethernet-II snap header (RFC1042 for most EtherTypes) */ -static unsigned char rfc1042_header[] = -{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; -/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ -static unsigned char bridge_tunnel_header[] = -{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; -/* No encapsulation header if EtherType < 0x600 (=length) */ - -void hostap_dump_tx_80211(const char *name, struct sk_buff *skb) -{ - struct ieee80211_hdr *hdr; - u16 fc; - - hdr = (struct ieee80211_hdr *) skb->data; - - printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n", - name, skb->len, jiffies); - - if (skb->len < 2) - return; - - fc = le16_to_cpu(hdr->frame_control); - printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s", - fc, (fc & IEEE80211_FCTL_FTYPE) >> 2, - (fc & IEEE80211_FCTL_STYPE) >> 4, - fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", - fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); - - if (skb->len < IEEE80211_DATA_HDR3_LEN) { - printk("\n"); - return; - } - - printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id), - le16_to_cpu(hdr->seq_ctrl)); - - printk(KERN_DEBUG " A1=%pM", hdr->addr1); - printk(" A2=%pM", hdr->addr2); - printk(" A3=%pM", hdr->addr3); - if (skb->len >= 30) - printk(" A4=%pM", hdr->addr4); - printk("\n"); -} - - -/* hard_start_xmit function for data interfaces (wlan#, wlan#wds#, wlan#sta) - * Convert Ethernet header into a suitable IEEE 802.11 header depending on - * device configuration. */ -netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - int need_headroom, need_tailroom = 0; - struct ieee80211_hdr hdr; - u16 fc, ethertype = 0; - enum { - WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME - } use_wds = WDS_NO; - u8 *encaps_data; - int hdr_len, encaps_len, skip_header_bytes; - int to_assoc_ap = 0; - struct hostap_skb_tx_data *meta; - - iface = netdev_priv(dev); - local = iface->local; - - if (skb->len < ETH_HLEN) { - printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb " - "(len=%d)\n", dev->name, skb->len); - kfree_skb(skb); - return NETDEV_TX_OK; - } - - if (local->ddev != dev) { - use_wds = (local->iw_mode == IW_MODE_MASTER && - !(local->wds_type & HOSTAP_WDS_STANDARD_FRAME)) ? - WDS_OWN_FRAME : WDS_COMPLIANT_FRAME; - if (dev == local->stadev) { - to_assoc_ap = 1; - use_wds = WDS_NO; - } else if (dev == local->apdev) { - printk(KERN_DEBUG "%s: prism2_tx: trying to use " - "AP device with Ethernet net dev\n", dev->name); - kfree_skb(skb); - return NETDEV_TX_OK; - } - } else { - if (local->iw_mode == IW_MODE_REPEAT) { - printk(KERN_DEBUG "%s: prism2_tx: trying to use " - "non-WDS link in Repeater mode\n", dev->name); - kfree_skb(skb); - return NETDEV_TX_OK; - } else if (local->iw_mode == IW_MODE_INFRA && - (local->wds_type & HOSTAP_WDS_AP_CLIENT) && - !ether_addr_equal(skb->data + ETH_ALEN, dev->dev_addr)) { - /* AP client mode: send frames with foreign src addr - * using 4-addr WDS frames */ - use_wds = WDS_COMPLIANT_FRAME; - } - } - - /* Incoming skb->data: dst_addr[6], src_addr[6], proto[2], payload - * ==> - * Prism2 TX frame with 802.11 header: - * txdesc (address order depending on used mode; includes dst_addr and - * src_addr), possible encapsulation (RFC1042/Bridge-Tunnel; - * proto[2], payload {, possible addr4[6]} */ - - ethertype = (skb->data[12] << 8) | skb->data[13]; - - memset(&hdr, 0, sizeof(hdr)); - - /* Length of data after IEEE 802.11 header */ - encaps_data = NULL; - encaps_len = 0; - skip_header_bytes = ETH_HLEN; - if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { - encaps_data = bridge_tunnel_header; - encaps_len = sizeof(bridge_tunnel_header); - skip_header_bytes -= 2; - } else if (ethertype >= 0x600) { - encaps_data = rfc1042_header; - encaps_len = sizeof(rfc1042_header); - skip_header_bytes -= 2; - } - - fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA; - hdr_len = IEEE80211_DATA_HDR3_LEN; - - if (use_wds != WDS_NO) { - /* Note! Prism2 station firmware has problems with sending real - * 802.11 frames with four addresses; until these problems can - * be fixed or worked around, 4-addr frames needed for WDS are - * using incompatible format: FromDS flag is not set and the - * fourth address is added after the frame payload; it is - * assumed, that the receiving station knows how to handle this - * frame format */ - - if (use_wds == WDS_COMPLIANT_FRAME) { - fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS; - /* From&To DS: Addr1 = RA, Addr2 = TA, Addr3 = DA, - * Addr4 = SA */ - skb_copy_from_linear_data_offset(skb, ETH_ALEN, - &hdr.addr4, ETH_ALEN); - hdr_len += ETH_ALEN; - } else { - /* bogus 4-addr format to workaround Prism2 station - * f/w bug */ - fc |= IEEE80211_FCTL_TODS; - /* From DS: Addr1 = DA (used as RA), - * Addr2 = BSSID (used as TA), Addr3 = SA (used as DA), - */ - - /* SA from skb->data + ETH_ALEN will be added after - * frame payload; use hdr.addr4 as a temporary buffer - */ - skb_copy_from_linear_data_offset(skb, ETH_ALEN, - &hdr.addr4, ETH_ALEN); - need_tailroom += ETH_ALEN; - } - - /* send broadcast and multicast frames to broadcast RA, if - * configured; otherwise, use unicast RA of the WDS link */ - if ((local->wds_type & HOSTAP_WDS_BROADCAST_RA) && - is_multicast_ether_addr(skb->data)) - eth_broadcast_addr(hdr.addr1); - else if (iface->type == HOSTAP_INTERFACE_WDS) - memcpy(&hdr.addr1, iface->u.wds.remote_addr, - ETH_ALEN); - else - memcpy(&hdr.addr1, local->bssid, ETH_ALEN); - memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN); - skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN); - } else if (local->iw_mode == IW_MODE_MASTER && !to_assoc_ap) { - fc |= IEEE80211_FCTL_FROMDS; - /* From DS: Addr1 = DA, Addr2 = BSSID, Addr3 = SA */ - skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN); - memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN); - skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr3, - ETH_ALEN); - } else if (local->iw_mode == IW_MODE_INFRA || to_assoc_ap) { - fc |= IEEE80211_FCTL_TODS; - /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */ - memcpy(&hdr.addr1, to_assoc_ap ? - local->assoc_ap_addr : local->bssid, ETH_ALEN); - skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2, - ETH_ALEN); - skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN); - } else if (local->iw_mode == IW_MODE_ADHOC) { - /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */ - skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN); - skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2, - ETH_ALEN); - memcpy(&hdr.addr3, local->bssid, ETH_ALEN); - } - - hdr.frame_control = cpu_to_le16(fc); - - skb_pull(skb, skip_header_bytes); - need_headroom = local->func->need_tx_headroom + hdr_len + encaps_len; - if (skb_tailroom(skb) < need_tailroom) { - skb = skb_unshare(skb, GFP_ATOMIC); - if (skb == NULL) { - iface->stats.tx_dropped++; - return NETDEV_TX_OK; - } - if (pskb_expand_head(skb, need_headroom, need_tailroom, - GFP_ATOMIC)) { - kfree_skb(skb); - iface->stats.tx_dropped++; - return NETDEV_TX_OK; - } - } else if (skb_headroom(skb) < need_headroom) { - struct sk_buff *tmp = skb; - skb = skb_realloc_headroom(skb, need_headroom); - kfree_skb(tmp); - if (skb == NULL) { - iface->stats.tx_dropped++; - return NETDEV_TX_OK; - } - } else { - skb = skb_unshare(skb, GFP_ATOMIC); - if (skb == NULL) { - iface->stats.tx_dropped++; - return NETDEV_TX_OK; - } - } - - if (encaps_data) - memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); - memcpy(skb_push(skb, hdr_len), &hdr, hdr_len); - if (use_wds == WDS_OWN_FRAME) { - skb_put_data(skb, &hdr.addr4, ETH_ALEN); - } - - iface->stats.tx_packets++; - iface->stats.tx_bytes += skb->len; - - skb_reset_mac_header(skb); - meta = (struct hostap_skb_tx_data *) skb->cb; - memset(meta, 0, sizeof(*meta)); - meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; - if (use_wds) - meta->flags |= HOSTAP_TX_FLAGS_WDS; - meta->ethertype = ethertype; - meta->iface = iface; - - /* Send IEEE 802.11 encapsulated frame using the master radio device */ - skb->dev = local->dev; - dev_queue_xmit(skb); - return NETDEV_TX_OK; -} - - -/* hard_start_xmit function for hostapd wlan#ap interfaces */ -netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - struct hostap_skb_tx_data *meta; - struct ieee80211_hdr *hdr; - u16 fc; - - iface = netdev_priv(dev); - local = iface->local; - - if (skb->len < 10) { - printk(KERN_DEBUG "%s: hostap_mgmt_start_xmit: short skb " - "(len=%d)\n", dev->name, skb->len); - kfree_skb(skb); - return NETDEV_TX_OK; - } - - iface->stats.tx_packets++; - iface->stats.tx_bytes += skb->len; - - meta = (struct hostap_skb_tx_data *) skb->cb; - memset(meta, 0, sizeof(*meta)); - meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; - meta->iface = iface; - - if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) { - hdr = (struct ieee80211_hdr *) skb->data; - fc = le16_to_cpu(hdr->frame_control); - if (ieee80211_is_data(hdr->frame_control) && - (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DATA) { - u8 *pos = &skb->data[IEEE80211_DATA_HDR3_LEN + - sizeof(rfc1042_header)]; - meta->ethertype = (pos[0] << 8) | pos[1]; - } - } - - /* Send IEEE 802.11 encapsulated frame using the master radio device */ - skb->dev = local->dev; - dev_queue_xmit(skb); - return NETDEV_TX_OK; -} - - -/* Called only from software IRQ */ -static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, - struct lib80211_crypt_data *crypt) -{ - struct hostap_interface *iface; - local_info_t *local; - struct ieee80211_hdr *hdr; - int prefix_len, postfix_len, hdr_len, res; - - iface = netdev_priv(skb->dev); - local = iface->local; - - if (skb->len < IEEE80211_DATA_HDR3_LEN) { - kfree_skb(skb); - return NULL; - } - - if (local->tkip_countermeasures && - strcmp(crypt->ops->name, "TKIP") == 0) { - hdr = (struct ieee80211_hdr *) skb->data; - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " - "TX packet to %pM\n", - local->dev->name, hdr->addr1); - } - kfree_skb(skb); - return NULL; - } - - skb = skb_unshare(skb, GFP_ATOMIC); - if (skb == NULL) - return NULL; - - prefix_len = crypt->ops->extra_mpdu_prefix_len + - crypt->ops->extra_msdu_prefix_len; - postfix_len = crypt->ops->extra_mpdu_postfix_len + - crypt->ops->extra_msdu_postfix_len; - if ((skb_headroom(skb) < prefix_len || - skb_tailroom(skb) < postfix_len) && - pskb_expand_head(skb, prefix_len, postfix_len, GFP_ATOMIC)) { - kfree_skb(skb); - return NULL; - } - - hdr = (struct ieee80211_hdr *) skb->data; - hdr_len = hostap_80211_get_hdrlen(hdr->frame_control); - - /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so - * call both MSDU and MPDU encryption functions from here. */ - atomic_inc(&crypt->refcnt); - res = 0; - if (crypt->ops->encrypt_msdu) - res = crypt->ops->encrypt_msdu(skb, hdr_len, crypt->priv); - if (res == 0 && crypt->ops->encrypt_mpdu) - res = crypt->ops->encrypt_mpdu(skb, hdr_len, crypt->priv); - atomic_dec(&crypt->refcnt); - if (res < 0) { - kfree_skb(skb); - return NULL; - } - - return skb; -} - - -/* hard_start_xmit function for master radio interface wifi#. - * AP processing (TX rate control, power save buffering, etc.). - * Use hardware TX function to send the frame. */ -netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - netdev_tx_t ret = NETDEV_TX_BUSY; - u16 fc; - struct hostap_tx_data tx; - ap_tx_ret tx_ret; - struct hostap_skb_tx_data *meta; - int no_encrypt = 0; - struct ieee80211_hdr *hdr; - - iface = netdev_priv(dev); - local = iface->local; - - tx.skb = skb; - tx.sta_ptr = NULL; - - meta = (struct hostap_skb_tx_data *) skb->cb; - if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) { - printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " - "expected 0x%08x)\n", - dev->name, meta->magic, HOSTAP_SKB_TX_DATA_MAGIC); - ret = NETDEV_TX_OK; - iface->stats.tx_dropped++; - goto fail; - } - - if (local->host_encrypt) { - /* Set crypt to default algorithm and key; will be replaced in - * AP code if STA has own alg/key */ - tx.crypt = local->crypt_info.crypt[local->crypt_info.tx_keyidx]; - tx.host_encrypt = 1; - } else { - tx.crypt = NULL; - tx.host_encrypt = 0; - } - - if (skb->len < 24) { - printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb " - "(len=%d)\n", dev->name, skb->len); - ret = NETDEV_TX_OK; - iface->stats.tx_dropped++; - goto fail; - } - - /* FIX (?): - * Wi-Fi 802.11b test plan suggests that AP should ignore power save - * bit in authentication and (re)association frames and assume tha - * STA remains awake for the response. */ - tx_ret = hostap_handle_sta_tx(local, &tx); - skb = tx.skb; - meta = (struct hostap_skb_tx_data *) skb->cb; - hdr = (struct ieee80211_hdr *) skb->data; - fc = le16_to_cpu(hdr->frame_control); - switch (tx_ret) { - case AP_TX_CONTINUE: - break; - case AP_TX_CONTINUE_NOT_AUTHORIZED: - if (local->ieee_802_1x && - ieee80211_is_data(hdr->frame_control) && - meta->ethertype != ETH_P_PAE && - !(meta->flags & HOSTAP_TX_FLAGS_WDS)) { - printk(KERN_DEBUG "%s: dropped frame to unauthorized " - "port (IEEE 802.1X): ethertype=0x%04x\n", - dev->name, meta->ethertype); - hostap_dump_tx_80211(dev->name, skb); - - ret = NETDEV_TX_OK; /* drop packet */ - iface->stats.tx_dropped++; - goto fail; - } - break; - case AP_TX_DROP: - ret = NETDEV_TX_OK; /* drop packet */ - iface->stats.tx_dropped++; - goto fail; - case AP_TX_RETRY: - goto fail; - case AP_TX_BUFFERED: - /* do not free skb here, it will be freed when the - * buffered frame is sent/timed out */ - ret = NETDEV_TX_OK; - goto tx_exit; - } - - /* Request TX callback if protocol version is 2 in 802.11 header; - * this version 2 is a special case used between hostapd and kernel - * driver */ - if (((fc & IEEE80211_FCTL_VERS) == BIT(1)) && - local->ap && local->ap->tx_callback_idx && meta->tx_cb_idx == 0) { - meta->tx_cb_idx = local->ap->tx_callback_idx; - - /* remove special version from the frame header */ - fc &= ~IEEE80211_FCTL_VERS; - hdr->frame_control = cpu_to_le16(fc); - } - - if (!ieee80211_is_data(hdr->frame_control)) { - no_encrypt = 1; - tx.crypt = NULL; - } - - if (local->ieee_802_1x && meta->ethertype == ETH_P_PAE && tx.crypt && - !(fc & IEEE80211_FCTL_PROTECTED)) { - no_encrypt = 1; - PDEBUG(DEBUG_EXTRA2, "%s: TX: IEEE 802.1X - passing " - "unencrypted EAPOL frame\n", dev->name); - tx.crypt = NULL; /* no encryption for IEEE 802.1X frames */ - } - - if (tx.crypt && (!tx.crypt->ops || !tx.crypt->ops->encrypt_mpdu)) - tx.crypt = NULL; - else if ((tx.crypt || - local->crypt_info.crypt[local->crypt_info.tx_keyidx]) && - !no_encrypt) { - /* Add ISWEP flag both for firmware and host based encryption - */ - fc |= IEEE80211_FCTL_PROTECTED; - hdr->frame_control = cpu_to_le16(fc); - } else if (local->drop_unencrypted && - ieee80211_is_data(hdr->frame_control) && - meta->ethertype != ETH_P_PAE) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: dropped unencrypted TX data " - "frame (drop_unencrypted=1)\n", dev->name); - } - iface->stats.tx_dropped++; - ret = NETDEV_TX_OK; - goto fail; - } - - if (tx.crypt) { - skb = hostap_tx_encrypt(skb, tx.crypt); - if (skb == NULL) { - printk(KERN_DEBUG "%s: TX - encryption failed\n", - dev->name); - ret = NETDEV_TX_OK; - goto fail; - } - meta = (struct hostap_skb_tx_data *) skb->cb; - if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) { - printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " - "expected 0x%08x) after hostap_tx_encrypt\n", - dev->name, meta->magic, - HOSTAP_SKB_TX_DATA_MAGIC); - ret = NETDEV_TX_OK; - iface->stats.tx_dropped++; - goto fail; - } - } - - if (local->func->tx == NULL || local->func->tx(skb, dev)) { - ret = NETDEV_TX_OK; - iface->stats.tx_dropped++; - } else { - ret = NETDEV_TX_OK; - iface->stats.tx_packets++; - iface->stats.tx_bytes += skb->len; - } - - fail: - if (ret == NETDEV_TX_OK && skb) - dev_kfree_skb(skb); - tx_exit: - if (tx.sta_ptr) - hostap_handle_sta_release(tx.sta_ptr); - return ret; -} - - -EXPORT_SYMBOL(hostap_master_start_xmit); diff --git a/drivers/net/wireless/intersil/hostap/hostap_ap.c b/drivers/net/wireless/intersil/hostap/hostap_ap.c deleted file mode 100644 index 9b546a71e7..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_ap.c +++ /dev/null @@ -1,3277 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Intersil Prism2 driver with Host AP (software access point) support - * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen - * <j@w1.fi> - * Copyright (c) 2002-2005, Jouni Malinen <j@w1.fi> - * - * This file is to be included into hostap.c when S/W AP functionality is - * compiled. - * - * AP: FIX: - * - if unicast Class 2 (assoc,reassoc,disassoc) frame received from - * unauthenticated STA, send deauth. frame (8802.11: 5.5) - * - if unicast Class 3 (data with to/from DS,deauth,pspoll) frame received - * from authenticated, but unassoc STA, send disassoc frame (8802.11: 5.5) - * - if unicast Class 3 received from unauthenticated STA, send deauth. frame - * (8802.11: 5.5) - */ - -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/delay.h> -#include <linux/random.h> -#include <linux/if_arp.h> -#include <linux/slab.h> -#include <linux/export.h> -#include <linux/moduleparam.h> -#include <linux/etherdevice.h> - -#include "hostap_wlan.h" -#include "hostap.h" -#include "hostap_ap.h" - -static int other_ap_policy[MAX_PARM_DEVICES] = { AP_OTHER_AP_SKIP_ALL, - DEF_INTS }; -module_param_array(other_ap_policy, int, NULL, 0444); -MODULE_PARM_DESC(other_ap_policy, "Other AP beacon monitoring policy (0-3)"); - -static int ap_max_inactivity[MAX_PARM_DEVICES] = { AP_MAX_INACTIVITY_SEC, - DEF_INTS }; -module_param_array(ap_max_inactivity, int, NULL, 0444); -MODULE_PARM_DESC(ap_max_inactivity, "AP timeout (in seconds) for station " - "inactivity"); - -static int ap_bridge_packets[MAX_PARM_DEVICES] = { 1, DEF_INTS }; -module_param_array(ap_bridge_packets, int, NULL, 0444); -MODULE_PARM_DESC(ap_bridge_packets, "Bridge packets directly between " - "stations"); - -static int autom_ap_wds[MAX_PARM_DEVICES] = { 0, DEF_INTS }; -module_param_array(autom_ap_wds, int, NULL, 0444); -MODULE_PARM_DESC(autom_ap_wds, "Add WDS connections to other APs " - "automatically"); - - -static struct sta_info* ap_get_sta(struct ap_data *ap, u8 *sta); -static void hostap_event_expired_sta(struct net_device *dev, - struct sta_info *sta); -static void handle_add_proc_queue(struct work_struct *work); - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT -static void handle_wds_oper_queue(struct work_struct *work); -static void prism2_send_mgmt(struct net_device *dev, - u16 type_subtype, char *body, - int body_len, u8 *addr, u16 tx_cb_idx); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - -#if !defined(PRISM2_NO_PROCFS_DEBUG) && defined(CONFIG_PROC_FS) -static int ap_debug_proc_show(struct seq_file *m, void *v) -{ - struct ap_data *ap = pde_data(file_inode(m->file)); - - seq_printf(m, "BridgedUnicastFrames=%u\n", ap->bridged_unicast); - seq_printf(m, "BridgedMulticastFrames=%u\n", ap->bridged_multicast); - seq_printf(m, "max_inactivity=%u\n", ap->max_inactivity / HZ); - seq_printf(m, "bridge_packets=%u\n", ap->bridge_packets); - seq_printf(m, "nullfunc_ack=%u\n", ap->nullfunc_ack); - seq_printf(m, "autom_ap_wds=%u\n", ap->autom_ap_wds); - seq_printf(m, "auth_algs=%u\n", ap->local->auth_algs); - seq_printf(m, "tx_drop_nonassoc=%u\n", ap->tx_drop_nonassoc); - return 0; -} -#endif - -static void ap_sta_hash_add(struct ap_data *ap, struct sta_info *sta) -{ - sta->hnext = ap->sta_hash[STA_HASH(sta->addr)]; - ap->sta_hash[STA_HASH(sta->addr)] = sta; -} - -static void ap_sta_hash_del(struct ap_data *ap, struct sta_info *sta) -{ - struct sta_info *s; - - s = ap->sta_hash[STA_HASH(sta->addr)]; - if (s == NULL) return; - if (ether_addr_equal(s->addr, sta->addr)) { - ap->sta_hash[STA_HASH(sta->addr)] = s->hnext; - return; - } - - while (s->hnext != NULL && !ether_addr_equal(s->hnext->addr, sta->addr)) - s = s->hnext; - if (s->hnext != NULL) - s->hnext = s->hnext->hnext; - else - printk("AP: could not remove STA %pM from hash table\n", - sta->addr); -} - -static void ap_free_sta(struct ap_data *ap, struct sta_info *sta) -{ - if (sta->ap && sta->local) - hostap_event_expired_sta(sta->local->dev, sta); - - if (ap->proc != NULL) { - char name[20]; - sprintf(name, "%pM", sta->addr); - remove_proc_entry(name, ap->proc); - } - - if (sta->crypt) { - sta->crypt->ops->deinit(sta->crypt->priv); - kfree(sta->crypt); - sta->crypt = NULL; - } - - skb_queue_purge(&sta->tx_buf); - - ap->num_sta--; -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - if (sta->aid > 0) - ap->sta_aid[sta->aid - 1] = NULL; - - if (!sta->ap) - kfree(sta->u.sta.challenge); - timer_shutdown_sync(&sta->timer); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - kfree(sta); -} - - -static void hostap_set_tim(local_info_t *local, int aid, int set) -{ - if (local->func->set_tim) - local->func->set_tim(local->dev, aid, set); -} - - -static void hostap_event_new_sta(struct net_device *dev, struct sta_info *sta) -{ - union iwreq_data wrqu; - memset(&wrqu, 0, sizeof(wrqu)); - memcpy(wrqu.addr.sa_data, sta->addr, ETH_ALEN); - wrqu.addr.sa_family = ARPHRD_ETHER; - wireless_send_event(dev, IWEVREGISTERED, &wrqu, NULL); -} - - -static void hostap_event_expired_sta(struct net_device *dev, - struct sta_info *sta) -{ - union iwreq_data wrqu; - memset(&wrqu, 0, sizeof(wrqu)); - memcpy(wrqu.addr.sa_data, sta->addr, ETH_ALEN); - wrqu.addr.sa_family = ARPHRD_ETHER; - wireless_send_event(dev, IWEVEXPIRED, &wrqu, NULL); -} - - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - -static void ap_handle_timer(struct timer_list *t) -{ - struct sta_info *sta = from_timer(sta, t, timer); - local_info_t *local; - struct ap_data *ap; - unsigned long next_time = 0; - int was_assoc; - - if (sta == NULL || sta->local == NULL || sta->local->ap == NULL) { - PDEBUG(DEBUG_AP, "ap_handle_timer() called with NULL data\n"); - return; - } - - local = sta->local; - ap = local->ap; - was_assoc = sta->flags & WLAN_STA_ASSOC; - - if (atomic_read(&sta->users) != 0) - next_time = jiffies + HZ; - else if ((sta->flags & WLAN_STA_PERM) && !(sta->flags & WLAN_STA_AUTH)) - next_time = jiffies + ap->max_inactivity; - - if (time_before(jiffies, sta->last_rx + ap->max_inactivity)) { - /* station activity detected; reset timeout state */ - sta->timeout_next = STA_NULLFUNC; - next_time = sta->last_rx + ap->max_inactivity; - } else if (sta->timeout_next == STA_DISASSOC && - !(sta->flags & WLAN_STA_PENDING_POLL)) { - /* STA ACKed data nullfunc frame poll */ - sta->timeout_next = STA_NULLFUNC; - next_time = jiffies + ap->max_inactivity; - } - - if (next_time) { - sta->timer.expires = next_time; - add_timer(&sta->timer); - return; - } - - if (sta->ap) - sta->timeout_next = STA_DEAUTH; - - if (sta->timeout_next == STA_DEAUTH && !(sta->flags & WLAN_STA_PERM)) { - spin_lock(&ap->sta_table_lock); - ap_sta_hash_del(ap, sta); - list_del(&sta->list); - spin_unlock(&ap->sta_table_lock); - sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC); - } else if (sta->timeout_next == STA_DISASSOC) - sta->flags &= ~WLAN_STA_ASSOC; - - if (was_assoc && !(sta->flags & WLAN_STA_ASSOC) && !sta->ap) - hostap_event_expired_sta(local->dev, sta); - - if (sta->timeout_next == STA_DEAUTH && sta->aid > 0 && - !skb_queue_empty(&sta->tx_buf)) { - hostap_set_tim(local, sta->aid, 0); - sta->flags &= ~WLAN_STA_TIM; - } - - if (sta->ap) { - if (ap->autom_ap_wds) { - PDEBUG(DEBUG_AP, "%s: removing automatic WDS " - "connection to AP %pM\n", - local->dev->name, sta->addr); - hostap_wds_link_oper(local, sta->addr, WDS_DEL); - } - } else if (sta->timeout_next == STA_NULLFUNC) { - /* send data frame to poll STA and check whether this frame - * is ACKed */ - /* FIX: IEEE80211_STYPE_NULLFUNC would be more appropriate, but - * it is apparently not retried so TX Exc events are not - * received for it */ - sta->flags |= WLAN_STA_PENDING_POLL; - prism2_send_mgmt(local->dev, IEEE80211_FTYPE_DATA | - IEEE80211_STYPE_DATA, NULL, 0, - sta->addr, ap->tx_callback_poll); - } else { - int deauth = sta->timeout_next == STA_DEAUTH; - __le16 resp; - PDEBUG(DEBUG_AP, "%s: sending %s info to STA %pM" - "(last=%lu, jiffies=%lu)\n", - local->dev->name, - deauth ? "deauthentication" : "disassociation", - sta->addr, sta->last_rx, jiffies); - - resp = cpu_to_le16(deauth ? WLAN_REASON_PREV_AUTH_NOT_VALID : - WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); - prism2_send_mgmt(local->dev, IEEE80211_FTYPE_MGMT | - (deauth ? IEEE80211_STYPE_DEAUTH : - IEEE80211_STYPE_DISASSOC), - (char *) &resp, 2, sta->addr, 0); - } - - if (sta->timeout_next == STA_DEAUTH) { - if (sta->flags & WLAN_STA_PERM) { - PDEBUG(DEBUG_AP, "%s: STA %pM" - " would have been removed, " - "but it has 'perm' flag\n", - local->dev->name, sta->addr); - } else - ap_free_sta(ap, sta); - return; - } - - if (sta->timeout_next == STA_NULLFUNC) { - sta->timeout_next = STA_DISASSOC; - sta->timer.expires = jiffies + AP_DISASSOC_DELAY; - } else { - sta->timeout_next = STA_DEAUTH; - sta->timer.expires = jiffies + AP_DEAUTH_DELAY; - } - - add_timer(&sta->timer); -} - - -void hostap_deauth_all_stas(struct net_device *dev, struct ap_data *ap, - int resend) -{ - u8 addr[ETH_ALEN]; - __le16 resp; - int i; - - PDEBUG(DEBUG_AP, "%s: Deauthenticate all stations\n", dev->name); - eth_broadcast_addr(addr); - - resp = cpu_to_le16(WLAN_REASON_PREV_AUTH_NOT_VALID); - - /* deauth message sent; try to resend it few times; the message is - * broadcast, so it may be delayed until next DTIM; there is not much - * else we can do at this point since the driver is going to be shut - * down */ - for (i = 0; i < 5; i++) { - prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | - IEEE80211_STYPE_DEAUTH, - (char *) &resp, 2, addr, 0); - - if (!resend || ap->num_sta <= 0) - return; - - mdelay(50); - } -} - - -static int ap_control_proc_show(struct seq_file *m, void *v) -{ - struct ap_data *ap = pde_data(file_inode(m->file)); - char *policy_txt; - struct mac_entry *entry; - - if (v == SEQ_START_TOKEN) { - switch (ap->mac_restrictions.policy) { - case MAC_POLICY_OPEN: - policy_txt = "open"; - break; - case MAC_POLICY_ALLOW: - policy_txt = "allow"; - break; - case MAC_POLICY_DENY: - policy_txt = "deny"; - break; - default: - policy_txt = "unknown"; - break; - } - seq_printf(m, "MAC policy: %s\n", policy_txt); - seq_printf(m, "MAC entries: %u\n", ap->mac_restrictions.entries); - seq_puts(m, "MAC list:\n"); - return 0; - } - - entry = v; - seq_printf(m, "%pM\n", entry->addr); - return 0; -} - -static void *ap_control_proc_start(struct seq_file *m, loff_t *_pos) -{ - struct ap_data *ap = pde_data(file_inode(m->file)); - spin_lock_bh(&ap->mac_restrictions.lock); - return seq_list_start_head(&ap->mac_restrictions.mac_list, *_pos); -} - -static void *ap_control_proc_next(struct seq_file *m, void *v, loff_t *_pos) -{ - struct ap_data *ap = pde_data(file_inode(m->file)); - return seq_list_next(v, &ap->mac_restrictions.mac_list, _pos); -} - -static void ap_control_proc_stop(struct seq_file *m, void *v) -{ - struct ap_data *ap = pde_data(file_inode(m->file)); - spin_unlock_bh(&ap->mac_restrictions.lock); -} - -static const struct seq_operations ap_control_proc_seqops = { - .start = ap_control_proc_start, - .next = ap_control_proc_next, - .stop = ap_control_proc_stop, - .show = ap_control_proc_show, -}; - -int ap_control_add_mac(struct mac_restrictions *mac_restrictions, u8 *mac) -{ - struct mac_entry *entry; - - entry = kmalloc(sizeof(struct mac_entry), GFP_KERNEL); - if (entry == NULL) - return -ENOMEM; - - memcpy(entry->addr, mac, ETH_ALEN); - - spin_lock_bh(&mac_restrictions->lock); - list_add_tail(&entry->list, &mac_restrictions->mac_list); - mac_restrictions->entries++; - spin_unlock_bh(&mac_restrictions->lock); - - return 0; -} - - -int ap_control_del_mac(struct mac_restrictions *mac_restrictions, u8 *mac) -{ - struct list_head *ptr; - struct mac_entry *entry; - - spin_lock_bh(&mac_restrictions->lock); - for (ptr = mac_restrictions->mac_list.next; - ptr != &mac_restrictions->mac_list; ptr = ptr->next) { - entry = list_entry(ptr, struct mac_entry, list); - - if (ether_addr_equal(entry->addr, mac)) { - list_del(ptr); - kfree(entry); - mac_restrictions->entries--; - spin_unlock_bh(&mac_restrictions->lock); - return 0; - } - } - spin_unlock_bh(&mac_restrictions->lock); - return -1; -} - - -static int ap_control_mac_deny(struct mac_restrictions *mac_restrictions, - u8 *mac) -{ - struct mac_entry *entry; - int found = 0; - - if (mac_restrictions->policy == MAC_POLICY_OPEN) - return 0; - - spin_lock_bh(&mac_restrictions->lock); - list_for_each_entry(entry, &mac_restrictions->mac_list, list) { - if (ether_addr_equal(entry->addr, mac)) { - found = 1; - break; - } - } - spin_unlock_bh(&mac_restrictions->lock); - - if (mac_restrictions->policy == MAC_POLICY_ALLOW) - return !found; - else - return found; -} - - -void ap_control_flush_macs(struct mac_restrictions *mac_restrictions) -{ - struct list_head *ptr, *n; - struct mac_entry *entry; - - if (mac_restrictions->entries == 0) - return; - - spin_lock_bh(&mac_restrictions->lock); - for (ptr = mac_restrictions->mac_list.next, n = ptr->next; - ptr != &mac_restrictions->mac_list; - ptr = n, n = ptr->next) { - entry = list_entry(ptr, struct mac_entry, list); - list_del(ptr); - kfree(entry); - } - mac_restrictions->entries = 0; - spin_unlock_bh(&mac_restrictions->lock); -} - - -int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, u8 *mac) -{ - struct sta_info *sta; - __le16 resp; - - spin_lock_bh(&ap->sta_table_lock); - sta = ap_get_sta(ap, mac); - if (sta) { - ap_sta_hash_del(ap, sta); - list_del(&sta->list); - } - spin_unlock_bh(&ap->sta_table_lock); - - if (!sta) - return -EINVAL; - - resp = cpu_to_le16(WLAN_REASON_PREV_AUTH_NOT_VALID); - prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH, - (char *) &resp, 2, sta->addr, 0); - - if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap) - hostap_event_expired_sta(dev, sta); - - ap_free_sta(ap, sta); - - return 0; -} - -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - -void ap_control_kickall(struct ap_data *ap) -{ - struct list_head *ptr, *n; - struct sta_info *sta; - - spin_lock_bh(&ap->sta_table_lock); - for (ptr = ap->sta_list.next, n = ptr->next; ptr != &ap->sta_list; - ptr = n, n = ptr->next) { - sta = list_entry(ptr, struct sta_info, list); - ap_sta_hash_del(ap, sta); - list_del(&sta->list); - if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) - hostap_event_expired_sta(sta->local->dev, sta); - ap_free_sta(ap, sta); - } - spin_unlock_bh(&ap->sta_table_lock); -} - - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - -static int prism2_ap_proc_show(struct seq_file *m, void *v) -{ - struct sta_info *sta = v; - int i; - - if (v == SEQ_START_TOKEN) { - seq_printf(m, "# BSSID CHAN SIGNAL NOISE RATE SSID FLAGS\n"); - return 0; - } - - if (!sta->ap) - return 0; - - seq_printf(m, "%pM %d %d %d %d '", - sta->addr, - sta->u.ap.channel, sta->last_rx_signal, - sta->last_rx_silence, sta->last_rx_rate); - - for (i = 0; i < sta->u.ap.ssid_len; i++) { - if (sta->u.ap.ssid[i] >= 32 && sta->u.ap.ssid[i] < 127) - seq_putc(m, sta->u.ap.ssid[i]); - else - seq_printf(m, "<%02x>", sta->u.ap.ssid[i]); - } - - seq_putc(m, '\''); - if (sta->capability & WLAN_CAPABILITY_ESS) - seq_puts(m, " [ESS]"); - if (sta->capability & WLAN_CAPABILITY_IBSS) - seq_puts(m, " [IBSS]"); - if (sta->capability & WLAN_CAPABILITY_PRIVACY) - seq_puts(m, " [WEP]"); - seq_putc(m, '\n'); - return 0; -} - -static void *prism2_ap_proc_start(struct seq_file *m, loff_t *_pos) -{ - struct ap_data *ap = pde_data(file_inode(m->file)); - spin_lock_bh(&ap->sta_table_lock); - return seq_list_start_head(&ap->sta_list, *_pos); -} - -static void *prism2_ap_proc_next(struct seq_file *m, void *v, loff_t *_pos) -{ - struct ap_data *ap = pde_data(file_inode(m->file)); - return seq_list_next(v, &ap->sta_list, _pos); -} - -static void prism2_ap_proc_stop(struct seq_file *m, void *v) -{ - struct ap_data *ap = pde_data(file_inode(m->file)); - spin_unlock_bh(&ap->sta_table_lock); -} - -static const struct seq_operations prism2_ap_proc_seqops = { - .start = prism2_ap_proc_start, - .next = prism2_ap_proc_next, - .stop = prism2_ap_proc_stop, - .show = prism2_ap_proc_show, -}; -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - -void hostap_check_sta_fw_version(struct ap_data *ap, int sta_fw_ver) -{ - if (!ap) - return; - - if (sta_fw_ver == PRISM2_FW_VER(0,8,0)) { - PDEBUG(DEBUG_AP, "Using data::nullfunc ACK workaround - " - "firmware upgrade recommended\n"); - ap->nullfunc_ack = 1; - } else - ap->nullfunc_ack = 0; - - if (sta_fw_ver == PRISM2_FW_VER(1,4,2)) { - printk(KERN_WARNING "%s: Warning: secondary station firmware " - "version 1.4.2 does not seem to work in Host AP mode\n", - ap->local->dev->name); - } -} - - -/* Called only as a tasklet (software IRQ) */ -static void hostap_ap_tx_cb(struct sk_buff *skb, int ok, void *data) -{ - struct ap_data *ap = data; - struct ieee80211_hdr *hdr; - - if (!ap->local->hostapd || !ap->local->apdev) { - dev_kfree_skb(skb); - return; - } - - /* Pass the TX callback frame to the hostapd; use 802.11 header version - * 1 to indicate failure (no ACK) and 2 success (frame ACKed) */ - - hdr = (struct ieee80211_hdr *) skb->data; - hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_VERS); - hdr->frame_control |= cpu_to_le16(ok ? BIT(1) : BIT(0)); - - skb->dev = ap->local->apdev; - skb_pull(skb, hostap_80211_get_hdrlen(hdr->frame_control)); - skb->pkt_type = PACKET_OTHERHOST; - skb->protocol = cpu_to_be16(ETH_P_802_2); - memset(skb->cb, 0, sizeof(skb->cb)); - netif_rx(skb); -} - - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT -/* Called only as a tasklet (software IRQ) */ -static void hostap_ap_tx_cb_auth(struct sk_buff *skb, int ok, void *data) -{ - struct ap_data *ap = data; - struct net_device *dev = ap->local->dev; - struct ieee80211_hdr *hdr; - u16 auth_alg, auth_transaction, status; - __le16 *pos; - struct sta_info *sta = NULL; - char *txt = NULL; - - if (ap->local->hostapd) { - dev_kfree_skb(skb); - return; - } - - hdr = (struct ieee80211_hdr *) skb->data; - if (!ieee80211_is_auth(hdr->frame_control) || - skb->len < IEEE80211_MGMT_HDR_LEN + 6) { - printk(KERN_DEBUG "%s: hostap_ap_tx_cb_auth received invalid " - "frame\n", dev->name); - dev_kfree_skb(skb); - return; - } - - pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); - auth_alg = le16_to_cpu(*pos++); - auth_transaction = le16_to_cpu(*pos++); - status = le16_to_cpu(*pos++); - - if (!ok) { - txt = "frame was not ACKed"; - goto done; - } - - spin_lock(&ap->sta_table_lock); - sta = ap_get_sta(ap, hdr->addr1); - if (sta) - atomic_inc(&sta->users); - spin_unlock(&ap->sta_table_lock); - - if (!sta) { - txt = "STA not found"; - goto done; - } - - if (status == WLAN_STATUS_SUCCESS && - ((auth_alg == WLAN_AUTH_OPEN && auth_transaction == 2) || - (auth_alg == WLAN_AUTH_SHARED_KEY && auth_transaction == 4))) { - txt = "STA authenticated"; - sta->flags |= WLAN_STA_AUTH; - sta->last_auth = jiffies; - } else if (status != WLAN_STATUS_SUCCESS) - txt = "authentication failed"; - - done: - if (sta) - atomic_dec(&sta->users); - if (txt) { - PDEBUG(DEBUG_AP, "%s: %pM auth_cb - alg=%d " - "trans#=%d status=%d - %s\n", - dev->name, hdr->addr1, - auth_alg, auth_transaction, status, txt); - } - dev_kfree_skb(skb); -} - - -/* Called only as a tasklet (software IRQ) */ -static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data) -{ - struct ap_data *ap = data; - struct net_device *dev = ap->local->dev; - struct ieee80211_hdr *hdr; - u16 status; - __le16 *pos; - struct sta_info *sta = NULL; - char *txt = NULL; - - if (ap->local->hostapd) { - dev_kfree_skb(skb); - return; - } - - hdr = (struct ieee80211_hdr *) skb->data; - if ((!ieee80211_is_assoc_resp(hdr->frame_control) && - !ieee80211_is_reassoc_resp(hdr->frame_control)) || - skb->len < IEEE80211_MGMT_HDR_LEN + 4) { - printk(KERN_DEBUG "%s: hostap_ap_tx_cb_assoc received invalid " - "frame\n", dev->name); - dev_kfree_skb(skb); - return; - } - - if (!ok) { - txt = "frame was not ACKed"; - goto done; - } - - spin_lock(&ap->sta_table_lock); - sta = ap_get_sta(ap, hdr->addr1); - if (sta) - atomic_inc(&sta->users); - spin_unlock(&ap->sta_table_lock); - - if (!sta) { - txt = "STA not found"; - goto done; - } - - pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); - pos++; - status = le16_to_cpu(*pos++); - if (status == WLAN_STATUS_SUCCESS) { - if (!(sta->flags & WLAN_STA_ASSOC)) - hostap_event_new_sta(dev, sta); - txt = "STA associated"; - sta->flags |= WLAN_STA_ASSOC; - sta->last_assoc = jiffies; - } else - txt = "association failed"; - - done: - if (sta) - atomic_dec(&sta->users); - if (txt) { - PDEBUG(DEBUG_AP, "%s: %pM assoc_cb - %s\n", - dev->name, hdr->addr1, txt); - } - dev_kfree_skb(skb); -} - -/* Called only as a tasklet (software IRQ); TX callback for poll frames used - * in verifying whether the STA is still present. */ -static void hostap_ap_tx_cb_poll(struct sk_buff *skb, int ok, void *data) -{ - struct ap_data *ap = data; - struct ieee80211_hdr *hdr; - struct sta_info *sta; - - if (skb->len < 24) - goto fail; - hdr = (struct ieee80211_hdr *) skb->data; - if (ok) { - spin_lock(&ap->sta_table_lock); - sta = ap_get_sta(ap, hdr->addr1); - if (sta) - sta->flags &= ~WLAN_STA_PENDING_POLL; - spin_unlock(&ap->sta_table_lock); - } else { - PDEBUG(DEBUG_AP, - "%s: STA %pM did not ACK activity poll frame\n", - ap->local->dev->name, hdr->addr1); - } - - fail: - dev_kfree_skb(skb); -} -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - -void hostap_init_data(local_info_t *local) -{ - struct ap_data *ap = local->ap; - - if (ap == NULL) { - printk(KERN_WARNING "hostap_init_data: ap == NULL\n"); - return; - } - memset(ap, 0, sizeof(struct ap_data)); - ap->local = local; - - ap->ap_policy = GET_INT_PARM(other_ap_policy, local->card_idx); - ap->bridge_packets = GET_INT_PARM(ap_bridge_packets, local->card_idx); - ap->max_inactivity = - GET_INT_PARM(ap_max_inactivity, local->card_idx) * HZ; - ap->autom_ap_wds = GET_INT_PARM(autom_ap_wds, local->card_idx); - - spin_lock_init(&ap->sta_table_lock); - INIT_LIST_HEAD(&ap->sta_list); - - /* Initialize task queue structure for AP management */ - INIT_WORK(&local->ap->add_sta_proc_queue, handle_add_proc_queue); - - ap->tx_callback_idx = - hostap_tx_callback_register(local, hostap_ap_tx_cb, ap); - if (ap->tx_callback_idx == 0) - printk(KERN_WARNING "%s: failed to register TX callback for " - "AP\n", local->dev->name); -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - INIT_WORK(&local->ap->wds_oper_queue, handle_wds_oper_queue); - - ap->tx_callback_auth = - hostap_tx_callback_register(local, hostap_ap_tx_cb_auth, ap); - ap->tx_callback_assoc = - hostap_tx_callback_register(local, hostap_ap_tx_cb_assoc, ap); - ap->tx_callback_poll = - hostap_tx_callback_register(local, hostap_ap_tx_cb_poll, ap); - if (ap->tx_callback_auth == 0 || ap->tx_callback_assoc == 0 || - ap->tx_callback_poll == 0) - printk(KERN_WARNING "%s: failed to register TX callback for " - "AP\n", local->dev->name); - - spin_lock_init(&ap->mac_restrictions.lock); - INIT_LIST_HEAD(&ap->mac_restrictions.mac_list); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - ap->initialized = 1; -} - - -void hostap_init_ap_proc(local_info_t *local) -{ - struct ap_data *ap = local->ap; - - ap->proc = local->proc; - if (ap->proc == NULL) - return; - -#ifndef PRISM2_NO_PROCFS_DEBUG - proc_create_single_data("ap_debug", 0, ap->proc, ap_debug_proc_show, ap); -#endif /* PRISM2_NO_PROCFS_DEBUG */ - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - proc_create_seq_data("ap_control", 0, ap->proc, &ap_control_proc_seqops, - ap); - proc_create_seq_data("ap", 0, ap->proc, &prism2_ap_proc_seqops, ap); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - -} - - -void hostap_free_data(struct ap_data *ap) -{ - struct sta_info *n, *sta; - - if (ap == NULL || !ap->initialized) { - printk(KERN_DEBUG "hostap_free_data: ap has not yet been " - "initialized - skip resource freeing\n"); - return; - } - - flush_work(&ap->add_sta_proc_queue); - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - flush_work(&ap->wds_oper_queue); - if (ap->crypt) - ap->crypt->deinit(ap->crypt_priv); - ap->crypt = ap->crypt_priv = NULL; -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - list_for_each_entry_safe(sta, n, &ap->sta_list, list) { - ap_sta_hash_del(ap, sta); - list_del(&sta->list); - if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) - hostap_event_expired_sta(sta->local->dev, sta); - ap_free_sta(ap, sta); - } - -#ifndef PRISM2_NO_PROCFS_DEBUG - if (ap->proc != NULL) { - remove_proc_entry("ap_debug", ap->proc); - } -#endif /* PRISM2_NO_PROCFS_DEBUG */ - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - if (ap->proc != NULL) { - remove_proc_entry("ap", ap->proc); - remove_proc_entry("ap_control", ap->proc); - } - ap_control_flush_macs(&ap->mac_restrictions); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - ap->initialized = 0; -} - - -/* caller should have mutex for AP STA list handling */ -static struct sta_info* ap_get_sta(struct ap_data *ap, u8 *sta) -{ - struct sta_info *s; - - s = ap->sta_hash[STA_HASH(sta)]; - while (s != NULL && !ether_addr_equal(s->addr, sta)) - s = s->hnext; - return s; -} - - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - -/* Called from timer handler and from scheduled AP queue handlers */ -static void prism2_send_mgmt(struct net_device *dev, - u16 type_subtype, char *body, - int body_len, u8 *addr, u16 tx_cb_idx) -{ - struct hostap_interface *iface; - local_info_t *local; - struct ieee80211_hdr *hdr; - u16 fc; - struct sk_buff *skb; - struct hostap_skb_tx_data *meta; - int hdrlen; - - iface = netdev_priv(dev); - local = iface->local; - dev = local->dev; /* always use master radio device */ - iface = netdev_priv(dev); - - if (!(dev->flags & IFF_UP)) { - PDEBUG(DEBUG_AP, "%s: prism2_send_mgmt - device is not UP - " - "cannot send frame\n", dev->name); - return; - } - - skb = dev_alloc_skb(sizeof(*hdr) + body_len); - if (skb == NULL) { - PDEBUG(DEBUG_AP, "%s: prism2_send_mgmt failed to allocate " - "skb\n", dev->name); - return; - } - - fc = type_subtype; - hdrlen = hostap_80211_get_hdrlen(cpu_to_le16(type_subtype)); - hdr = skb_put_zero(skb, hdrlen); - if (body) - skb_put_data(skb, body, body_len); - - /* FIX: ctrl::ack sending used special HFA384X_TX_CTRL_802_11 - * tx_control instead of using local->tx_control */ - - - memcpy(hdr->addr1, addr, ETH_ALEN); /* DA / RA */ - if (ieee80211_is_data(hdr->frame_control)) { - fc |= IEEE80211_FCTL_FROMDS; - memcpy(hdr->addr2, dev->dev_addr, ETH_ALEN); /* BSSID */ - memcpy(hdr->addr3, dev->dev_addr, ETH_ALEN); /* SA */ - } else if (ieee80211_is_ctl(hdr->frame_control)) { - /* control:ACK does not have addr2 or addr3 */ - eth_zero_addr(hdr->addr2); - eth_zero_addr(hdr->addr3); - } else { - memcpy(hdr->addr2, dev->dev_addr, ETH_ALEN); /* SA */ - memcpy(hdr->addr3, dev->dev_addr, ETH_ALEN); /* BSSID */ - } - - hdr->frame_control = cpu_to_le16(fc); - - meta = (struct hostap_skb_tx_data *) skb->cb; - memset(meta, 0, sizeof(*meta)); - meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; - meta->iface = iface; - meta->tx_cb_idx = tx_cb_idx; - - skb->dev = dev; - skb_reset_mac_header(skb); - skb_reset_network_header(skb); - dev_queue_xmit(skb); -} -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - -#ifdef CONFIG_PROC_FS -static int prism2_sta_proc_show(struct seq_file *m, void *v) -{ - struct sta_info *sta = m->private; - int i; - - /* FIX: possible race condition.. the STA data could have just expired, - * but proc entry was still here so that the read could have started; - * some locking should be done here.. */ - - seq_printf(m, - "%s=%pM\nusers=%d\naid=%d\n" - "flags=0x%04x%s%s%s%s%s%s%s\n" - "capability=0x%02x\nlisten_interval=%d\nsupported_rates=", - sta->ap ? "AP" : "STA", - sta->addr, atomic_read(&sta->users), sta->aid, - sta->flags, - sta->flags & WLAN_STA_AUTH ? " AUTH" : "", - sta->flags & WLAN_STA_ASSOC ? " ASSOC" : "", - sta->flags & WLAN_STA_PS ? " PS" : "", - sta->flags & WLAN_STA_TIM ? " TIM" : "", - sta->flags & WLAN_STA_PERM ? " PERM" : "", - sta->flags & WLAN_STA_AUTHORIZED ? " AUTHORIZED" : "", - sta->flags & WLAN_STA_PENDING_POLL ? " POLL" : "", - sta->capability, sta->listen_interval); - /* supported_rates: 500 kbit/s units with msb ignored */ - for (i = 0; i < sizeof(sta->supported_rates); i++) - if (sta->supported_rates[i] != 0) - seq_printf(m, "%d%sMbps ", - (sta->supported_rates[i] & 0x7f) / 2, - sta->supported_rates[i] & 1 ? ".5" : ""); - seq_printf(m, - "\njiffies=%lu\nlast_auth=%lu\nlast_assoc=%lu\n" - "last_rx=%lu\nlast_tx=%lu\nrx_packets=%lu\n" - "tx_packets=%lu\n" - "rx_bytes=%lu\ntx_bytes=%lu\nbuffer_count=%d\n" - "last_rx: silence=%d dBm signal=%d dBm rate=%d%s Mbps\n" - "tx_rate=%d\ntx[1M]=%d\ntx[2M]=%d\ntx[5.5M]=%d\n" - "tx[11M]=%d\n" - "rx[1M]=%d\nrx[2M]=%d\nrx[5.5M]=%d\nrx[11M]=%d\n", - jiffies, sta->last_auth, sta->last_assoc, sta->last_rx, - sta->last_tx, - sta->rx_packets, sta->tx_packets, sta->rx_bytes, - sta->tx_bytes, skb_queue_len(&sta->tx_buf), - sta->last_rx_silence, - sta->last_rx_signal, sta->last_rx_rate / 10, - sta->last_rx_rate % 10 ? ".5" : "", - sta->tx_rate, sta->tx_count[0], sta->tx_count[1], - sta->tx_count[2], sta->tx_count[3], sta->rx_count[0], - sta->rx_count[1], sta->rx_count[2], sta->rx_count[3]); - if (sta->crypt && sta->crypt->ops && sta->crypt->ops->print_stats) - sta->crypt->ops->print_stats(m, sta->crypt->priv); -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - if (sta->ap) { - if (sta->u.ap.channel >= 0) - seq_printf(m, "channel=%d\n", sta->u.ap.channel); - seq_puts(m, "ssid="); - for (i = 0; i < sta->u.ap.ssid_len; i++) { - if (sta->u.ap.ssid[i] >= 32 && sta->u.ap.ssid[i] < 127) - seq_putc(m, sta->u.ap.ssid[i]); - else - seq_printf(m, "<%02x>", sta->u.ap.ssid[i]); - } - seq_putc(m, '\n'); - } -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - return 0; -} -#endif - -static void handle_add_proc_queue(struct work_struct *work) -{ - struct ap_data *ap = container_of(work, struct ap_data, - add_sta_proc_queue); - struct sta_info *sta; - char name[20]; - struct add_sta_proc_data *entry, *prev; - - entry = ap->add_sta_proc_entries; - ap->add_sta_proc_entries = NULL; - - while (entry) { - spin_lock_bh(&ap->sta_table_lock); - sta = ap_get_sta(ap, entry->addr); - if (sta) - atomic_inc(&sta->users); - spin_unlock_bh(&ap->sta_table_lock); - - if (sta) { - sprintf(name, "%pM", sta->addr); - sta->proc = proc_create_single_data( - name, 0, ap->proc, - prism2_sta_proc_show, sta); - - atomic_dec(&sta->users); - } - - prev = entry; - entry = entry->next; - kfree(prev); - } -} - - -static struct sta_info * ap_add_sta(struct ap_data *ap, u8 *addr) -{ - struct sta_info *sta; - - sta = kzalloc(sizeof(struct sta_info), GFP_ATOMIC); - if (sta == NULL) { - PDEBUG(DEBUG_AP, "AP: kmalloc failed\n"); - return NULL; - } - - /* initialize STA info data */ - sta->local = ap->local; - skb_queue_head_init(&sta->tx_buf); - memcpy(sta->addr, addr, ETH_ALEN); - - atomic_inc(&sta->users); - spin_lock_bh(&ap->sta_table_lock); - list_add(&sta->list, &ap->sta_list); - ap->num_sta++; - ap_sta_hash_add(ap, sta); - spin_unlock_bh(&ap->sta_table_lock); - - if (ap->proc) { - struct add_sta_proc_data *entry; - /* schedule a non-interrupt context process to add a procfs - * entry for the STA since procfs code use GFP_KERNEL */ - entry = kmalloc(sizeof(*entry), GFP_ATOMIC); - if (entry) { - memcpy(entry->addr, sta->addr, ETH_ALEN); - entry->next = ap->add_sta_proc_entries; - ap->add_sta_proc_entries = entry; - schedule_work(&ap->add_sta_proc_queue); - } else - printk(KERN_DEBUG "Failed to add STA proc data\n"); - } - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - timer_setup(&sta->timer, ap_handle_timer, 0); - sta->timer.expires = jiffies + ap->max_inactivity; - if (!ap->local->hostapd) - add_timer(&sta->timer); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - return sta; -} - - -static int ap_tx_rate_ok(int rateidx, struct sta_info *sta, - local_info_t *local) -{ - if (rateidx > sta->tx_max_rate || - !(sta->tx_supp_rates & (1 << rateidx))) - return 0; - - if (local->tx_rate_control != 0 && - !(local->tx_rate_control & (1 << rateidx))) - return 0; - - return 1; -} - - -static void prism2_check_tx_rates(struct sta_info *sta) -{ - int i; - - sta->tx_supp_rates = 0; - for (i = 0; i < sizeof(sta->supported_rates); i++) { - if ((sta->supported_rates[i] & 0x7f) == 2) - sta->tx_supp_rates |= WLAN_RATE_1M; - if ((sta->supported_rates[i] & 0x7f) == 4) - sta->tx_supp_rates |= WLAN_RATE_2M; - if ((sta->supported_rates[i] & 0x7f) == 11) - sta->tx_supp_rates |= WLAN_RATE_5M5; - if ((sta->supported_rates[i] & 0x7f) == 22) - sta->tx_supp_rates |= WLAN_RATE_11M; - } - sta->tx_max_rate = sta->tx_rate = sta->tx_rate_idx = 0; - if (sta->tx_supp_rates & WLAN_RATE_1M) { - sta->tx_max_rate = 0; - if (ap_tx_rate_ok(0, sta, sta->local)) { - sta->tx_rate = 10; - sta->tx_rate_idx = 0; - } - } - if (sta->tx_supp_rates & WLAN_RATE_2M) { - sta->tx_max_rate = 1; - if (ap_tx_rate_ok(1, sta, sta->local)) { - sta->tx_rate = 20; - sta->tx_rate_idx = 1; - } - } - if (sta->tx_supp_rates & WLAN_RATE_5M5) { - sta->tx_max_rate = 2; - if (ap_tx_rate_ok(2, sta, sta->local)) { - sta->tx_rate = 55; - sta->tx_rate_idx = 2; - } - } - if (sta->tx_supp_rates & WLAN_RATE_11M) { - sta->tx_max_rate = 3; - if (ap_tx_rate_ok(3, sta, sta->local)) { - sta->tx_rate = 110; - sta->tx_rate_idx = 3; - } - } -} - - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - -static void ap_crypt_init(struct ap_data *ap) -{ - ap->crypt = lib80211_get_crypto_ops("WEP"); - - if (ap->crypt) { - if (ap->crypt->init) { - ap->crypt_priv = ap->crypt->init(0); - if (ap->crypt_priv == NULL) - ap->crypt = NULL; - else { - u8 key[WEP_KEY_LEN]; - get_random_bytes(key, WEP_KEY_LEN); - ap->crypt->set_key(key, WEP_KEY_LEN, NULL, - ap->crypt_priv); - } - } - } - - if (ap->crypt == NULL) { - printk(KERN_WARNING "AP could not initialize WEP: load module " - "lib80211_crypt_wep.ko\n"); - } -} - - -/* Generate challenge data for shared key authentication. IEEE 802.11 specifies - * that WEP algorithm is used for generating challenge. This should be unique, - * but otherwise there is not really need for randomness etc. Initialize WEP - * with pseudo random key and then use increasing IV to get unique challenge - * streams. - * - * Called only as a scheduled task for pending AP frames. - */ -static char * ap_auth_make_challenge(struct ap_data *ap) -{ - char *tmpbuf; - struct sk_buff *skb; - - if (ap->crypt == NULL) { - ap_crypt_init(ap); - if (ap->crypt == NULL) - return NULL; - } - - tmpbuf = kmalloc(WLAN_AUTH_CHALLENGE_LEN, GFP_ATOMIC); - if (tmpbuf == NULL) { - PDEBUG(DEBUG_AP, "AP: kmalloc failed for challenge\n"); - return NULL; - } - - skb = dev_alloc_skb(WLAN_AUTH_CHALLENGE_LEN + - ap->crypt->extra_mpdu_prefix_len + - ap->crypt->extra_mpdu_postfix_len); - if (skb == NULL) { - kfree(tmpbuf); - return NULL; - } - - skb_reserve(skb, ap->crypt->extra_mpdu_prefix_len); - skb_put_zero(skb, WLAN_AUTH_CHALLENGE_LEN); - if (ap->crypt->encrypt_mpdu(skb, 0, ap->crypt_priv)) { - dev_kfree_skb(skb); - kfree(tmpbuf); - return NULL; - } - - skb_copy_from_linear_data_offset(skb, ap->crypt->extra_mpdu_prefix_len, - tmpbuf, WLAN_AUTH_CHALLENGE_LEN); - dev_kfree_skb(skb); - - return tmpbuf; -} - - -/* Called only as a scheduled task for pending AP frames. */ -static void handle_authen(local_info_t *local, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats) -{ - struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - size_t hdrlen; - struct ap_data *ap = local->ap; - char body[8 + WLAN_AUTH_CHALLENGE_LEN], *challenge = NULL; - int len, olen; - u16 auth_alg, auth_transaction, status_code; - __le16 *pos; - u16 resp = WLAN_STATUS_SUCCESS; - struct sta_info *sta = NULL; - struct lib80211_crypt_data *crypt; - char *txt = ""; - - len = skb->len - IEEE80211_MGMT_HDR_LEN; - - hdrlen = hostap_80211_get_hdrlen(hdr->frame_control); - - if (len < 6) { - PDEBUG(DEBUG_AP, "%s: handle_authen - too short payload " - "(len=%d) from %pM\n", dev->name, len, hdr->addr2); - return; - } - - spin_lock_bh(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta) - atomic_inc(&sta->users); - spin_unlock_bh(&local->ap->sta_table_lock); - - if (sta && sta->crypt) - crypt = sta->crypt; - else { - int idx = 0; - if (skb->len >= hdrlen + 3) - idx = skb->data[hdrlen + 3] >> 6; - crypt = local->crypt_info.crypt[idx]; - } - - pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); - auth_alg = __le16_to_cpu(*pos); - pos++; - auth_transaction = __le16_to_cpu(*pos); - pos++; - status_code = __le16_to_cpu(*pos); - pos++; - - if (ether_addr_equal(dev->dev_addr, hdr->addr2) || - ap_control_mac_deny(&ap->mac_restrictions, hdr->addr2)) { - txt = "authentication denied"; - resp = WLAN_STATUS_UNSPECIFIED_FAILURE; - goto fail; - } - - if (((local->auth_algs & PRISM2_AUTH_OPEN) && - auth_alg == WLAN_AUTH_OPEN) || - ((local->auth_algs & PRISM2_AUTH_SHARED_KEY) && - crypt && auth_alg == WLAN_AUTH_SHARED_KEY)) { - } else { - txt = "unsupported algorithm"; - resp = WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG; - goto fail; - } - - if (len >= 8) { - u8 *u = (u8 *) pos; - if (*u == WLAN_EID_CHALLENGE) { - if (*(u + 1) != WLAN_AUTH_CHALLENGE_LEN) { - txt = "invalid challenge len"; - resp = WLAN_STATUS_CHALLENGE_FAIL; - goto fail; - } - if (len - 8 < WLAN_AUTH_CHALLENGE_LEN) { - txt = "challenge underflow"; - resp = WLAN_STATUS_CHALLENGE_FAIL; - goto fail; - } - challenge = (char *) (u + 2); - } - } - - if (sta && sta->ap) { - if (time_after(jiffies, sta->u.ap.last_beacon + - (10 * sta->listen_interval * HZ) / 1024)) { - PDEBUG(DEBUG_AP, "%s: no beacons received for a while," - " assuming AP %pM is now STA\n", - dev->name, sta->addr); - sta->ap = 0; - sta->flags = 0; - sta->u.sta.challenge = NULL; - } else { - txt = "AP trying to authenticate?"; - resp = WLAN_STATUS_UNSPECIFIED_FAILURE; - goto fail; - } - } - - if ((auth_alg == WLAN_AUTH_OPEN && auth_transaction == 1) || - (auth_alg == WLAN_AUTH_SHARED_KEY && - (auth_transaction == 1 || - (auth_transaction == 3 && sta != NULL && - sta->u.sta.challenge != NULL)))) { - } else { - txt = "unknown authentication transaction number"; - resp = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; - goto fail; - } - - if (sta == NULL) { - txt = "new STA"; - - if (local->ap->num_sta >= MAX_STA_COUNT) { - /* FIX: might try to remove some old STAs first? */ - txt = "no more room for new STAs"; - resp = WLAN_STATUS_UNSPECIFIED_FAILURE; - goto fail; - } - - sta = ap_add_sta(local->ap, hdr->addr2); - if (sta == NULL) { - txt = "ap_add_sta failed"; - resp = WLAN_STATUS_UNSPECIFIED_FAILURE; - goto fail; - } - } - - switch (auth_alg) { - case WLAN_AUTH_OPEN: - txt = "authOK"; - /* IEEE 802.11 standard is not completely clear about - * whether STA is considered authenticated after - * authentication OK frame has been send or after it - * has been ACKed. In order to reduce interoperability - * issues, mark the STA authenticated before ACK. */ - sta->flags |= WLAN_STA_AUTH; - break; - - case WLAN_AUTH_SHARED_KEY: - if (auth_transaction == 1) { - if (sta->u.sta.challenge == NULL) { - sta->u.sta.challenge = - ap_auth_make_challenge(local->ap); - if (sta->u.sta.challenge == NULL) { - resp = WLAN_STATUS_UNSPECIFIED_FAILURE; - goto fail; - } - } - } else { - if (sta->u.sta.challenge == NULL || - challenge == NULL || - memcmp(sta->u.sta.challenge, challenge, - WLAN_AUTH_CHALLENGE_LEN) != 0 || - !ieee80211_has_protected(hdr->frame_control)) { - txt = "challenge response incorrect"; - resp = WLAN_STATUS_CHALLENGE_FAIL; - goto fail; - } - - txt = "challenge OK - authOK"; - /* IEEE 802.11 standard is not completely clear about - * whether STA is considered authenticated after - * authentication OK frame has been send or after it - * has been ACKed. In order to reduce interoperability - * issues, mark the STA authenticated before ACK. */ - sta->flags |= WLAN_STA_AUTH; - kfree(sta->u.sta.challenge); - sta->u.sta.challenge = NULL; - } - break; - } - - fail: - pos = (__le16 *) body; - *pos = cpu_to_le16(auth_alg); - pos++; - *pos = cpu_to_le16(auth_transaction + 1); - pos++; - *pos = cpu_to_le16(resp); /* status_code */ - pos++; - olen = 6; - - if (resp == WLAN_STATUS_SUCCESS && sta != NULL && - sta->u.sta.challenge != NULL && - auth_alg == WLAN_AUTH_SHARED_KEY && auth_transaction == 1) { - u8 *tmp = (u8 *) pos; - *tmp++ = WLAN_EID_CHALLENGE; - *tmp++ = WLAN_AUTH_CHALLENGE_LEN; - pos++; - memcpy(pos, sta->u.sta.challenge, WLAN_AUTH_CHALLENGE_LEN); - olen += 2 + WLAN_AUTH_CHALLENGE_LEN; - } - - prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH, - body, olen, hdr->addr2, ap->tx_callback_auth); - - if (sta) { - sta->last_rx = jiffies; - atomic_dec(&sta->users); - } - - if (resp) { - PDEBUG(DEBUG_AP, "%s: %pM auth (alg=%d " - "trans#=%d stat=%d len=%d fc=%04x) ==> %d (%s)\n", - dev->name, hdr->addr2, - auth_alg, auth_transaction, status_code, len, - le16_to_cpu(hdr->frame_control), resp, txt); - } -} - - -/* Called only as a scheduled task for pending AP frames. */ -static void handle_assoc(local_info_t *local, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats, int reassoc) -{ - struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - char body[12], *p, *lpos; - int len, left; - __le16 *pos; - u16 resp = WLAN_STATUS_SUCCESS; - struct sta_info *sta = NULL; - int send_deauth = 0; - char __always_unused *txt = ""; - u8 prev_ap[ETH_ALEN]; - - left = len = skb->len - IEEE80211_MGMT_HDR_LEN; - - if (len < (reassoc ? 10 : 4)) { - PDEBUG(DEBUG_AP, "%s: handle_assoc - too short payload " - "(len=%d, reassoc=%d) from %pM\n", - dev->name, len, reassoc, hdr->addr2); - return; - } - - spin_lock_bh(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta == NULL || (sta->flags & WLAN_STA_AUTH) == 0) { - spin_unlock_bh(&local->ap->sta_table_lock); - txt = "trying to associate before authentication"; - send_deauth = 1; - resp = WLAN_STATUS_UNSPECIFIED_FAILURE; - sta = NULL; /* do not decrement sta->users */ - goto fail; - } - atomic_inc(&sta->users); - spin_unlock_bh(&local->ap->sta_table_lock); - - pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); - sta->capability = __le16_to_cpu(*pos); - pos++; left -= 2; - sta->listen_interval = __le16_to_cpu(*pos); - pos++; left -= 2; - - if (reassoc) { - memcpy(prev_ap, pos, ETH_ALEN); - pos++; pos++; pos++; left -= 6; - } else - eth_zero_addr(prev_ap); - - if (left >= 2) { - unsigned int ileft; - unsigned char *u = (unsigned char *) pos; - - if (*u == WLAN_EID_SSID) { - u++; left--; - ileft = *u; - u++; left--; - - if (ileft > left || ileft > MAX_SSID_LEN) { - txt = "SSID overflow"; - resp = WLAN_STATUS_UNSPECIFIED_FAILURE; - goto fail; - } - - if (ileft != strlen(local->essid) || - memcmp(local->essid, u, ileft) != 0) { - txt = "not our SSID"; - resp = WLAN_STATUS_ASSOC_DENIED_UNSPEC; - goto fail; - } - - u += ileft; - left -= ileft; - } - - if (left >= 2 && *u == WLAN_EID_SUPP_RATES) { - u++; left--; - ileft = *u; - u++; left--; - - if (ileft > left || ileft == 0 || - ileft > WLAN_SUPP_RATES_MAX) { - txt = "SUPP_RATES len error"; - resp = WLAN_STATUS_UNSPECIFIED_FAILURE; - goto fail; - } - - memset(sta->supported_rates, 0, - sizeof(sta->supported_rates)); - memcpy(sta->supported_rates, u, ileft); - prism2_check_tx_rates(sta); - - u += ileft; - left -= ileft; - } - - if (left > 0) { - PDEBUG(DEBUG_AP, "%s: assoc from %pM" - " with extra data (%d bytes) [", - dev->name, hdr->addr2, left); - while (left > 0) { - PDEBUG2(DEBUG_AP, "<%02x>", *u); - u++; left--; - } - PDEBUG2(DEBUG_AP, "]\n"); - } - } else { - txt = "frame underflow"; - resp = WLAN_STATUS_UNSPECIFIED_FAILURE; - goto fail; - } - - /* get a unique AID */ - if (sta->aid > 0) - txt = "OK, old AID"; - else { - spin_lock_bh(&local->ap->sta_table_lock); - for (sta->aid = 1; sta->aid <= MAX_AID_TABLE_SIZE; sta->aid++) - if (local->ap->sta_aid[sta->aid - 1] == NULL) - break; - if (sta->aid > MAX_AID_TABLE_SIZE) { - sta->aid = 0; - spin_unlock_bh(&local->ap->sta_table_lock); - resp = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA; - txt = "no room for more AIDs"; - } else { - local->ap->sta_aid[sta->aid - 1] = sta; - spin_unlock_bh(&local->ap->sta_table_lock); - txt = "OK, new AID"; - } - } - - fail: - pos = (__le16 *) body; - - if (send_deauth) { - *pos = cpu_to_le16(WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH); - pos++; - } else { - /* FIX: CF-Pollable and CF-PollReq should be set to match the - * values in beacons/probe responses */ - /* FIX: how about privacy and WEP? */ - /* capability */ - *pos = cpu_to_le16(WLAN_CAPABILITY_ESS); - pos++; - - /* status_code */ - *pos = cpu_to_le16(resp); - pos++; - - *pos = cpu_to_le16((sta && sta->aid > 0 ? sta->aid : 0) | - BIT(14) | BIT(15)); /* AID */ - pos++; - - /* Supported rates (Information element) */ - p = (char *) pos; - *p++ = WLAN_EID_SUPP_RATES; - lpos = p; - *p++ = 0; /* len */ - if (local->tx_rate_control & WLAN_RATE_1M) { - *p++ = local->basic_rates & WLAN_RATE_1M ? 0x82 : 0x02; - (*lpos)++; - } - if (local->tx_rate_control & WLAN_RATE_2M) { - *p++ = local->basic_rates & WLAN_RATE_2M ? 0x84 : 0x04; - (*lpos)++; - } - if (local->tx_rate_control & WLAN_RATE_5M5) { - *p++ = local->basic_rates & WLAN_RATE_5M5 ? - 0x8b : 0x0b; - (*lpos)++; - } - if (local->tx_rate_control & WLAN_RATE_11M) { - *p++ = local->basic_rates & WLAN_RATE_11M ? - 0x96 : 0x16; - (*lpos)++; - } - pos = (__le16 *) p; - } - - prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | - (send_deauth ? IEEE80211_STYPE_DEAUTH : - (reassoc ? IEEE80211_STYPE_REASSOC_RESP : - IEEE80211_STYPE_ASSOC_RESP)), - body, (u8 *) pos - (u8 *) body, - hdr->addr2, - send_deauth ? 0 : local->ap->tx_callback_assoc); - - if (sta) { - if (resp == WLAN_STATUS_SUCCESS) { - sta->last_rx = jiffies; - /* STA will be marked associated from TX callback, if - * AssocResp is ACKed */ - } - atomic_dec(&sta->users); - } - -#if 0 - PDEBUG(DEBUG_AP, "%s: %pM %sassoc (len=%d " - "prev_ap=%pM) => %d(%d) (%s)\n", - dev->name, - hdr->addr2, - reassoc ? "re" : "", len, - prev_ap, - resp, send_deauth, txt); -#endif -} - - -/* Called only as a scheduled task for pending AP frames. */ -static void handle_deauth(local_info_t *local, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats) -{ - struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - char *body = (char *) (skb->data + IEEE80211_MGMT_HDR_LEN); - int len; - u16 reason_code; - __le16 *pos; - struct sta_info *sta = NULL; - - len = skb->len - IEEE80211_MGMT_HDR_LEN; - - if (len < 2) { - printk("handle_deauth - too short payload (len=%d)\n", len); - return; - } - - pos = (__le16 *) body; - reason_code = le16_to_cpu(*pos); - - PDEBUG(DEBUG_AP, "%s: deauthentication: %pM len=%d, " - "reason_code=%d\n", dev->name, hdr->addr2, - len, reason_code); - - spin_lock_bh(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta != NULL) { - if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap) - hostap_event_expired_sta(local->dev, sta); - sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC); - } - spin_unlock_bh(&local->ap->sta_table_lock); - if (sta == NULL) { - printk("%s: deauthentication from %pM, " - "reason_code=%d, but STA not authenticated\n", dev->name, - hdr->addr2, reason_code); - } -} - - -/* Called only as a scheduled task for pending AP frames. */ -static void handle_disassoc(local_info_t *local, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats) -{ - struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - char *body = skb->data + IEEE80211_MGMT_HDR_LEN; - int len; - u16 reason_code; - __le16 *pos; - struct sta_info *sta = NULL; - - len = skb->len - IEEE80211_MGMT_HDR_LEN; - - if (len < 2) { - printk("handle_disassoc - too short payload (len=%d)\n", len); - return; - } - - pos = (__le16 *) body; - reason_code = le16_to_cpu(*pos); - - PDEBUG(DEBUG_AP, "%s: disassociation: %pM len=%d, " - "reason_code=%d\n", dev->name, hdr->addr2, - len, reason_code); - - spin_lock_bh(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta != NULL) { - if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap) - hostap_event_expired_sta(local->dev, sta); - sta->flags &= ~WLAN_STA_ASSOC; - } - spin_unlock_bh(&local->ap->sta_table_lock); - if (sta == NULL) { - printk("%s: disassociation from %pM, " - "reason_code=%d, but STA not authenticated\n", - dev->name, hdr->addr2, reason_code); - } -} - - -/* Called only as a scheduled task for pending AP frames. */ -static void ap_handle_data_nullfunc(local_info_t *local, - struct ieee80211_hdr *hdr) -{ - struct net_device *dev = local->dev; - - /* some STA f/w's seem to require control::ACK frame for - * data::nullfunc, but at least Prism2 station f/w version 0.8.0 does - * not send this.. - * send control::ACK for the data::nullfunc */ - - printk(KERN_DEBUG "Sending control::ACK for data::nullfunc\n"); - prism2_send_mgmt(dev, IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK, - NULL, 0, hdr->addr2, 0); -} - - -/* Called only as a scheduled task for pending AP frames. */ -static void ap_handle_dropped_data(local_info_t *local, - struct ieee80211_hdr *hdr) -{ - struct net_device *dev = local->dev; - struct sta_info *sta; - __le16 reason; - - spin_lock_bh(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta) - atomic_inc(&sta->users); - spin_unlock_bh(&local->ap->sta_table_lock); - - if (sta != NULL && (sta->flags & WLAN_STA_ASSOC)) { - PDEBUG(DEBUG_AP, "ap_handle_dropped_data: STA is now okay?\n"); - atomic_dec(&sta->users); - return; - } - - reason = cpu_to_le16(WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA); - prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | - ((sta == NULL || !(sta->flags & WLAN_STA_ASSOC)) ? - IEEE80211_STYPE_DEAUTH : IEEE80211_STYPE_DISASSOC), - (char *) &reason, sizeof(reason), hdr->addr2, 0); - - if (sta) - atomic_dec(&sta->users); -} - -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - -/* Called only as a scheduled task for pending AP frames. */ -static void pspoll_send_buffered(local_info_t *local, struct sta_info *sta, - struct sk_buff *skb) -{ - struct hostap_skb_tx_data *meta; - - if (!(sta->flags & WLAN_STA_PS)) { - /* Station has moved to non-PS mode, so send all buffered - * frames using normal device queue. */ - dev_queue_xmit(skb); - return; - } - - /* add a flag for hostap_handle_sta_tx() to know that this skb should - * be passed through even though STA is using PS */ - meta = (struct hostap_skb_tx_data *) skb->cb; - meta->flags |= HOSTAP_TX_FLAGS_BUFFERED_FRAME; - if (!skb_queue_empty(&sta->tx_buf)) { - /* indicate to STA that more frames follow */ - meta->flags |= HOSTAP_TX_FLAGS_ADD_MOREDATA; - } - dev_queue_xmit(skb); -} - - -/* Called only as a scheduled task for pending AP frames. */ -static void handle_pspoll(local_info_t *local, - struct ieee80211_hdr *hdr, - struct hostap_80211_rx_status *rx_stats) -{ - struct net_device *dev = local->dev; - struct sta_info *sta; - u16 aid; - struct sk_buff *skb; - - PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=%pM, TA=%pM PWRMGT=%d\n", - hdr->addr1, hdr->addr2, !!ieee80211_has_pm(hdr->frame_control)); - - if (!ether_addr_equal(hdr->addr1, dev->dev_addr)) { - PDEBUG(DEBUG_AP, - "handle_pspoll - addr1(BSSID)=%pM not own MAC\n", - hdr->addr1); - return; - } - - aid = le16_to_cpu(hdr->duration_id); - if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) { - PDEBUG(DEBUG_PS, " PSPOLL and AID[15:14] not set\n"); - return; - } - aid &= ~(BIT(15) | BIT(14)); - if (aid == 0 || aid > MAX_AID_TABLE_SIZE) { - PDEBUG(DEBUG_PS, " invalid aid=%d\n", aid); - return; - } - PDEBUG(DEBUG_PS2, " aid=%d\n", aid); - - spin_lock_bh(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta) - atomic_inc(&sta->users); - spin_unlock_bh(&local->ap->sta_table_lock); - - if (sta == NULL) { - PDEBUG(DEBUG_PS, " STA not found\n"); - return; - } - if (sta->aid != aid) { - PDEBUG(DEBUG_PS, " received aid=%i does not match with " - "assoc.aid=%d\n", aid, sta->aid); - return; - } - - /* FIX: todo: - * - add timeout for buffering (clear aid in TIM vector if buffer timed - * out (expiry time must be longer than ListenInterval for - * the corresponding STA; "8802-11: 11.2.1.9 AP aging function" - * - what to do, if buffered, pspolled, and sent frame is not ACKed by - * sta; store buffer for later use and leave TIM aid bit set? use - * TX event to check whether frame was ACKed? - */ - - while ((skb = skb_dequeue(&sta->tx_buf)) != NULL) { - /* send buffered frame .. */ - PDEBUG(DEBUG_PS2, "Sending buffered frame to STA after PS POLL" - " (buffer_count=%d)\n", skb_queue_len(&sta->tx_buf)); - - pspoll_send_buffered(local, sta, skb); - - if (sta->flags & WLAN_STA_PS) { - /* send only one buffered packet per PS Poll */ - /* FIX: should ignore further PS Polls until the - * buffered packet that was just sent is acknowledged - * (Tx or TxExc event) */ - break; - } - } - - if (skb_queue_empty(&sta->tx_buf)) { - /* try to clear aid from TIM */ - if (!(sta->flags & WLAN_STA_TIM)) - PDEBUG(DEBUG_PS2, "Re-unsetting TIM for aid %d\n", - aid); - hostap_set_tim(local, aid, 0); - sta->flags &= ~WLAN_STA_TIM; - } - - atomic_dec(&sta->users); -} - - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - -static void handle_wds_oper_queue(struct work_struct *work) -{ - struct ap_data *ap = container_of(work, struct ap_data, - wds_oper_queue); - local_info_t *local = ap->local; - struct wds_oper_data *entry, *prev; - - spin_lock_bh(&local->lock); - entry = local->ap->wds_oper_entries; - local->ap->wds_oper_entries = NULL; - spin_unlock_bh(&local->lock); - - while (entry) { - PDEBUG(DEBUG_AP, "%s: %s automatic WDS connection " - "to AP %pM\n", - local->dev->name, - entry->type == WDS_ADD ? "adding" : "removing", - entry->addr); - if (entry->type == WDS_ADD) - prism2_wds_add(local, entry->addr, 0); - else if (entry->type == WDS_DEL) - prism2_wds_del(local, entry->addr, 0, 1); - - prev = entry; - entry = entry->next; - kfree(prev); - } -} - - -/* Called only as a scheduled task for pending AP frames. */ -static void handle_beacon(local_info_t *local, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - char *body = skb->data + IEEE80211_MGMT_HDR_LEN; - int len, left; - u16 beacon_int, capability; - __le16 *pos; - char *ssid = NULL; - unsigned char *supp_rates = NULL; - int ssid_len = 0, supp_rates_len = 0; - struct sta_info *sta = NULL; - int new_sta = 0, channel = -1; - - len = skb->len - IEEE80211_MGMT_HDR_LEN; - - if (len < 8 + 2 + 2) { - printk(KERN_DEBUG "handle_beacon - too short payload " - "(len=%d)\n", len); - return; - } - - pos = (__le16 *) body; - left = len; - - /* Timestamp (8 octets) */ - pos += 4; left -= 8; - /* Beacon interval (2 octets) */ - beacon_int = le16_to_cpu(*pos); - pos++; left -= 2; - /* Capability information (2 octets) */ - capability = le16_to_cpu(*pos); - pos++; left -= 2; - - if (local->ap->ap_policy != AP_OTHER_AP_EVEN_IBSS && - capability & WLAN_CAPABILITY_IBSS) - return; - - if (left >= 2) { - unsigned int ileft; - unsigned char *u = (unsigned char *) pos; - - if (*u == WLAN_EID_SSID) { - u++; left--; - ileft = *u; - u++; left--; - - if (ileft > left || ileft > MAX_SSID_LEN) { - PDEBUG(DEBUG_AP, "SSID: overflow\n"); - return; - } - - if (local->ap->ap_policy == AP_OTHER_AP_SAME_SSID && - (ileft != strlen(local->essid) || - memcmp(local->essid, u, ileft) != 0)) { - /* not our SSID */ - return; - } - - ssid = u; - ssid_len = ileft; - - u += ileft; - left -= ileft; - } - - if (*u == WLAN_EID_SUPP_RATES) { - u++; left--; - ileft = *u; - u++; left--; - - if (ileft > left || ileft == 0 || ileft > 8) { - PDEBUG(DEBUG_AP, " - SUPP_RATES len error\n"); - return; - } - - supp_rates = u; - supp_rates_len = ileft; - - u += ileft; - left -= ileft; - } - - if (*u == WLAN_EID_DS_PARAMS) { - u++; left--; - ileft = *u; - u++; left--; - - if (ileft > left || ileft != 1) { - PDEBUG(DEBUG_AP, " - DS_PARAMS len error\n"); - return; - } - - channel = *u; - - u += ileft; - left -= ileft; - } - } - - spin_lock_bh(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta != NULL) - atomic_inc(&sta->users); - spin_unlock_bh(&local->ap->sta_table_lock); - - if (sta == NULL) { - /* add new AP */ - new_sta = 1; - sta = ap_add_sta(local->ap, hdr->addr2); - if (sta == NULL) { - printk(KERN_INFO "prism2: kmalloc failed for AP " - "data structure\n"); - return; - } - hostap_event_new_sta(local->dev, sta); - - /* mark APs authentication and associated for pseudo ad-hoc - * style communication */ - sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC; - - if (local->ap->autom_ap_wds) { - hostap_wds_link_oper(local, sta->addr, WDS_ADD); - } - } - - sta->ap = 1; - if (ssid) { - sta->u.ap.ssid_len = ssid_len; - memcpy(sta->u.ap.ssid, ssid, ssid_len); - sta->u.ap.ssid[ssid_len] = '\0'; - } else { - sta->u.ap.ssid_len = 0; - sta->u.ap.ssid[0] = '\0'; - } - sta->u.ap.channel = channel; - sta->rx_packets++; - sta->rx_bytes += len; - sta->u.ap.last_beacon = sta->last_rx = jiffies; - sta->capability = capability; - sta->listen_interval = beacon_int; - - atomic_dec(&sta->users); - - if (new_sta) { - memset(sta->supported_rates, 0, sizeof(sta->supported_rates)); - memcpy(sta->supported_rates, supp_rates, supp_rates_len); - prism2_check_tx_rates(sta); - } -} - -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - -/* Called only as a tasklet. */ -static void handle_ap_item(local_info_t *local, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats) -{ -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - struct net_device *dev = local->dev; -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - u16 fc, type, stype; - struct ieee80211_hdr *hdr; - - /* FIX: should give skb->len to handler functions and check that the - * buffer is long enough */ - hdr = (struct ieee80211_hdr *) skb->data; - fc = le16_to_cpu(hdr->frame_control); - type = fc & IEEE80211_FCTL_FTYPE; - stype = fc & IEEE80211_FCTL_STYPE; - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - if (!local->hostapd && type == IEEE80211_FTYPE_DATA) { - PDEBUG(DEBUG_AP, "handle_ap_item - data frame\n"); - - if (!(fc & IEEE80211_FCTL_TODS) || - (fc & IEEE80211_FCTL_FROMDS)) { - if (stype == IEEE80211_STYPE_NULLFUNC) { - /* no ToDS nullfunc seems to be used to check - * AP association; so send reject message to - * speed up re-association */ - ap_handle_dropped_data(local, hdr); - goto done; - } - PDEBUG(DEBUG_AP, " not ToDS frame (fc=0x%04x)\n", - fc); - goto done; - } - - if (!ether_addr_equal(hdr->addr1, dev->dev_addr)) { - PDEBUG(DEBUG_AP, "handle_ap_item - addr1(BSSID)=%pM" - " not own MAC\n", hdr->addr1); - goto done; - } - - if (local->ap->nullfunc_ack && - stype == IEEE80211_STYPE_NULLFUNC) - ap_handle_data_nullfunc(local, hdr); - else - ap_handle_dropped_data(local, hdr); - goto done; - } - - if (type == IEEE80211_FTYPE_MGMT && stype == IEEE80211_STYPE_BEACON) { - handle_beacon(local, skb, rx_stats); - goto done; - } -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - if (type == IEEE80211_FTYPE_CTL && stype == IEEE80211_STYPE_PSPOLL) { - handle_pspoll(local, hdr, rx_stats); - goto done; - } - - if (local->hostapd) { - PDEBUG(DEBUG_AP, "Unknown frame in AP queue: type=0x%02x " - "subtype=0x%02x\n", type, stype); - goto done; - } - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - if (type != IEEE80211_FTYPE_MGMT) { - PDEBUG(DEBUG_AP, "handle_ap_item - not a management frame?\n"); - goto done; - } - - if (!ether_addr_equal(hdr->addr1, dev->dev_addr)) { - PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=%pM" - " not own MAC\n", hdr->addr1); - goto done; - } - - if (!ether_addr_equal(hdr->addr3, dev->dev_addr)) { - PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=%pM" - " not own MAC\n", hdr->addr3); - goto done; - } - - switch (stype) { - case IEEE80211_STYPE_ASSOC_REQ: - handle_assoc(local, skb, rx_stats, 0); - break; - case IEEE80211_STYPE_ASSOC_RESP: - PDEBUG(DEBUG_AP, "==> ASSOC RESP (ignored)\n"); - break; - case IEEE80211_STYPE_REASSOC_REQ: - handle_assoc(local, skb, rx_stats, 1); - break; - case IEEE80211_STYPE_REASSOC_RESP: - PDEBUG(DEBUG_AP, "==> REASSOC RESP (ignored)\n"); - break; - case IEEE80211_STYPE_ATIM: - PDEBUG(DEBUG_AP, "==> ATIM (ignored)\n"); - break; - case IEEE80211_STYPE_DISASSOC: - handle_disassoc(local, skb, rx_stats); - break; - case IEEE80211_STYPE_AUTH: - handle_authen(local, skb, rx_stats); - break; - case IEEE80211_STYPE_DEAUTH: - handle_deauth(local, skb, rx_stats); - break; - default: - PDEBUG(DEBUG_AP, "Unknown mgmt frame subtype 0x%02x\n", - stype >> 4); - break; - } -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - done: - dev_kfree_skb(skb); -} - - -/* Called only as a tasklet (software IRQ) */ -void hostap_rx(struct net_device *dev, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats) -{ - struct hostap_interface *iface; - local_info_t *local; - struct ieee80211_hdr *hdr; - - iface = netdev_priv(dev); - local = iface->local; - - if (skb->len < 16) - goto drop; - - dev->stats.rx_packets++; - - hdr = (struct ieee80211_hdr *) skb->data; - - if (local->ap->ap_policy == AP_OTHER_AP_SKIP_ALL && - ieee80211_is_beacon(hdr->frame_control)) - goto drop; - - skb->protocol = cpu_to_be16(ETH_P_HOSTAP); - handle_ap_item(local, skb, rx_stats); - return; - - drop: - dev_kfree_skb(skb); -} - - -/* Called only as a tasklet (software IRQ) */ -static void schedule_packet_send(local_info_t *local, struct sta_info *sta) -{ - struct sk_buff *skb; - struct ieee80211_hdr *hdr; - struct hostap_80211_rx_status rx_stats; - - if (skb_queue_empty(&sta->tx_buf)) - return; - - skb = dev_alloc_skb(16); - if (skb == NULL) { - printk(KERN_DEBUG "%s: schedule_packet_send: skb alloc " - "failed\n", local->dev->name); - return; - } - - hdr = skb_put(skb, 16); - - /* Generate a fake pspoll frame to start packet delivery */ - hdr->frame_control = cpu_to_le16( - IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); - memcpy(hdr->addr1, local->dev->dev_addr, ETH_ALEN); - memcpy(hdr->addr2, sta->addr, ETH_ALEN); - hdr->duration_id = cpu_to_le16(sta->aid | BIT(15) | BIT(14)); - - PDEBUG(DEBUG_PS2, - "%s: Scheduling buffered packet delivery for STA %pM\n", - local->dev->name, sta->addr); - - skb->dev = local->dev; - - memset(&rx_stats, 0, sizeof(rx_stats)); - hostap_rx(local->dev, skb, &rx_stats); -} - - -int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], - struct iw_quality qual[], int buf_size, - int aplist) -{ - struct ap_data *ap = local->ap; - struct list_head *ptr; - int count = 0; - - spin_lock_bh(&ap->sta_table_lock); - - for (ptr = ap->sta_list.next; ptr != NULL && ptr != &ap->sta_list; - ptr = ptr->next) { - struct sta_info *sta = (struct sta_info *) ptr; - - if (aplist && !sta->ap) - continue; - addr[count].sa_family = ARPHRD_ETHER; - memcpy(addr[count].sa_data, sta->addr, ETH_ALEN); - if (sta->last_rx_silence == 0) - qual[count].qual = sta->last_rx_signal < 27 ? - 0 : (sta->last_rx_signal - 27) * 92 / 127; - else - qual[count].qual = sta->last_rx_signal - - sta->last_rx_silence - 35; - qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal); - qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); - qual[count].updated = sta->last_rx_updated; - - sta->last_rx_updated = IW_QUAL_DBM; - - count++; - if (count >= buf_size) - break; - } - spin_unlock_bh(&ap->sta_table_lock); - - return count; -} - - -/* Translate our list of Access Points & Stations to a card independent - * format that the Wireless Tools will understand - Jean II */ -int prism2_ap_translate_scan(struct net_device *dev, - struct iw_request_info *info, char *buffer) -{ - struct hostap_interface *iface; - local_info_t *local; - struct ap_data *ap; - struct list_head *ptr; - struct iw_event iwe; - char *current_ev = buffer; - char *end_buf = buffer + IW_SCAN_MAX_DATA; -#if !defined(PRISM2_NO_KERNEL_IEEE80211_MGMT) - char buf[64]; -#endif - - iface = netdev_priv(dev); - local = iface->local; - ap = local->ap; - - spin_lock_bh(&ap->sta_table_lock); - - for (ptr = ap->sta_list.next; ptr != NULL && ptr != &ap->sta_list; - ptr = ptr->next) { - struct sta_info *sta = (struct sta_info *) ptr; - - /* First entry *MUST* be the AP MAC address */ - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWAP; - iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, sta->addr, ETH_ALEN); - iwe.len = IW_EV_ADDR_LEN; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_ADDR_LEN); - - /* Use the mode to indicate if it's a station or - * an Access Point */ - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWMODE; - if (sta->ap) - iwe.u.mode = IW_MODE_MASTER; - else - iwe.u.mode = IW_MODE_INFRA; - iwe.len = IW_EV_UINT_LEN; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_UINT_LEN); - - /* Some quality */ - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVQUAL; - if (sta->last_rx_silence == 0) - iwe.u.qual.qual = sta->last_rx_signal < 27 ? - 0 : (sta->last_rx_signal - 27) * 92 / 127; - else - iwe.u.qual.qual = sta->last_rx_signal - - sta->last_rx_silence - 35; - iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal); - iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); - iwe.u.qual.updated = sta->last_rx_updated; - iwe.len = IW_EV_QUAL_LEN; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_QUAL_LEN); - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - if (sta->ap) { - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWESSID; - iwe.u.data.length = sta->u.ap.ssid_len; - iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(info, current_ev, - end_buf, &iwe, - sta->u.ap.ssid); - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWENCODE; - if (sta->capability & WLAN_CAPABILITY_PRIVACY) - iwe.u.data.flags = - IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; - else - iwe.u.data.flags = IW_ENCODE_DISABLED; - current_ev = iwe_stream_add_point(info, current_ev, - end_buf, &iwe, - sta->u.ap.ssid); - - if (sta->u.ap.channel > 0 && - sta->u.ap.channel <= FREQ_COUNT) { - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = freq_list[sta->u.ap.channel - 1] - * 100000; - iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event( - info, current_ev, end_buf, &iwe, - IW_EV_FREQ_LEN); - } - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVCUSTOM; - sprintf(buf, "beacon_interval=%d", - sta->listen_interval); - iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(info, current_ev, - end_buf, &iwe, buf); - } -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - sta->last_rx_updated = IW_QUAL_DBM; - - /* To be continued, we should make good use of IWEVCUSTOM */ - } - - spin_unlock_bh(&ap->sta_table_lock); - - return current_ev - buffer; -} - - -static int prism2_hostapd_add_sta(struct ap_data *ap, - struct prism2_hostapd_param *param) -{ - struct sta_info *sta; - - spin_lock_bh(&ap->sta_table_lock); - sta = ap_get_sta(ap, param->sta_addr); - if (sta) - atomic_inc(&sta->users); - spin_unlock_bh(&ap->sta_table_lock); - - if (sta == NULL) { - sta = ap_add_sta(ap, param->sta_addr); - if (sta == NULL) - return -1; - } - - if (!(sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) - hostap_event_new_sta(sta->local->dev, sta); - - sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC; - sta->last_rx = jiffies; - sta->aid = param->u.add_sta.aid; - sta->capability = param->u.add_sta.capability; - sta->tx_supp_rates = param->u.add_sta.tx_supp_rates; - if (sta->tx_supp_rates & WLAN_RATE_1M) - sta->supported_rates[0] = 2; - if (sta->tx_supp_rates & WLAN_RATE_2M) - sta->supported_rates[1] = 4; - if (sta->tx_supp_rates & WLAN_RATE_5M5) - sta->supported_rates[2] = 11; - if (sta->tx_supp_rates & WLAN_RATE_11M) - sta->supported_rates[3] = 22; - prism2_check_tx_rates(sta); - atomic_dec(&sta->users); - return 0; -} - - -static int prism2_hostapd_remove_sta(struct ap_data *ap, - struct prism2_hostapd_param *param) -{ - struct sta_info *sta; - - spin_lock_bh(&ap->sta_table_lock); - sta = ap_get_sta(ap, param->sta_addr); - if (sta) { - ap_sta_hash_del(ap, sta); - list_del(&sta->list); - } - spin_unlock_bh(&ap->sta_table_lock); - - if (!sta) - return -ENOENT; - - if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) - hostap_event_expired_sta(sta->local->dev, sta); - ap_free_sta(ap, sta); - - return 0; -} - - -static int prism2_hostapd_get_info_sta(struct ap_data *ap, - struct prism2_hostapd_param *param) -{ - struct sta_info *sta; - - spin_lock_bh(&ap->sta_table_lock); - sta = ap_get_sta(ap, param->sta_addr); - if (sta) - atomic_inc(&sta->users); - spin_unlock_bh(&ap->sta_table_lock); - - if (!sta) - return -ENOENT; - - param->u.get_info_sta.inactive_sec = (jiffies - sta->last_rx) / HZ; - - atomic_dec(&sta->users); - - return 1; -} - - -static int prism2_hostapd_set_flags_sta(struct ap_data *ap, - struct prism2_hostapd_param *param) -{ - struct sta_info *sta; - - spin_lock_bh(&ap->sta_table_lock); - sta = ap_get_sta(ap, param->sta_addr); - if (sta) { - sta->flags |= param->u.set_flags_sta.flags_or; - sta->flags &= param->u.set_flags_sta.flags_and; - } - spin_unlock_bh(&ap->sta_table_lock); - - if (!sta) - return -ENOENT; - - return 0; -} - - -static int prism2_hostapd_sta_clear_stats(struct ap_data *ap, - struct prism2_hostapd_param *param) -{ - struct sta_info *sta; - int rate; - - spin_lock_bh(&ap->sta_table_lock); - sta = ap_get_sta(ap, param->sta_addr); - if (sta) { - sta->rx_packets = sta->tx_packets = 0; - sta->rx_bytes = sta->tx_bytes = 0; - for (rate = 0; rate < WLAN_RATE_COUNT; rate++) { - sta->tx_count[rate] = 0; - sta->rx_count[rate] = 0; - } - } - spin_unlock_bh(&ap->sta_table_lock); - - if (!sta) - return -ENOENT; - - return 0; -} - - -int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param) -{ - switch (param->cmd) { - case PRISM2_HOSTAPD_FLUSH: - ap_control_kickall(ap); - return 0; - case PRISM2_HOSTAPD_ADD_STA: - return prism2_hostapd_add_sta(ap, param); - case PRISM2_HOSTAPD_REMOVE_STA: - return prism2_hostapd_remove_sta(ap, param); - case PRISM2_HOSTAPD_GET_INFO_STA: - return prism2_hostapd_get_info_sta(ap, param); - case PRISM2_HOSTAPD_SET_FLAGS_STA: - return prism2_hostapd_set_flags_sta(ap, param); - case PRISM2_HOSTAPD_STA_CLEAR_STATS: - return prism2_hostapd_sta_clear_stats(ap, param); - default: - printk(KERN_WARNING "prism2_hostapd: unknown cmd=%d\n", - param->cmd); - return -EOPNOTSUPP; - } -} - - -/* Update station info for host-based TX rate control and return current - * TX rate */ -static int ap_update_sta_tx_rate(struct sta_info *sta, struct net_device *dev) -{ - int ret = sta->tx_rate; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - sta->tx_count[sta->tx_rate_idx]++; - sta->tx_since_last_failure++; - sta->tx_consecutive_exc = 0; - if (sta->tx_since_last_failure >= WLAN_RATE_UPDATE_COUNT && - sta->tx_rate_idx < sta->tx_max_rate) { - /* use next higher rate */ - int old_rate, new_rate; - old_rate = new_rate = sta->tx_rate_idx; - while (new_rate < sta->tx_max_rate) { - new_rate++; - if (ap_tx_rate_ok(new_rate, sta, local)) { - sta->tx_rate_idx = new_rate; - break; - } - } - if (old_rate != sta->tx_rate_idx) { - switch (sta->tx_rate_idx) { - case 0: sta->tx_rate = 10; break; - case 1: sta->tx_rate = 20; break; - case 2: sta->tx_rate = 55; break; - case 3: sta->tx_rate = 110; break; - default: sta->tx_rate = 0; break; - } - PDEBUG(DEBUG_AP, "%s: STA %pM TX rate raised to %d\n", - dev->name, sta->addr, sta->tx_rate); - } - sta->tx_since_last_failure = 0; - } - - return ret; -} - - -/* Called only from software IRQ. Called for each TX frame prior possible - * encryption and transmit. */ -ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx) -{ - struct sta_info *sta = NULL; - struct sk_buff *skb = tx->skb; - int set_tim, ret; - struct ieee80211_hdr *hdr; - struct hostap_skb_tx_data *meta; - - meta = (struct hostap_skb_tx_data *) skb->cb; - ret = AP_TX_CONTINUE; - if (local->ap == NULL || skb->len < 10 || - meta->iface->type == HOSTAP_INTERFACE_STA) - goto out; - - hdr = (struct ieee80211_hdr *) skb->data; - - if (hdr->addr1[0] & 0x01) { - /* broadcast/multicast frame - no AP related processing */ - if (local->ap->num_sta <= 0) - ret = AP_TX_DROP; - goto out; - } - - /* unicast packet - check whether destination STA is associated */ - spin_lock(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr1); - if (sta) - atomic_inc(&sta->users); - spin_unlock(&local->ap->sta_table_lock); - - if (local->iw_mode == IW_MODE_MASTER && sta == NULL && - !(meta->flags & HOSTAP_TX_FLAGS_WDS) && - meta->iface->type != HOSTAP_INTERFACE_MASTER && - meta->iface->type != HOSTAP_INTERFACE_AP) { -#if 0 - /* This can happen, e.g., when wlan0 is added to a bridge and - * bridging code does not know which port is the correct target - * for a unicast frame. In this case, the packet is send to all - * ports of the bridge. Since this is a valid scenario, do not - * print out any errors here. */ - if (net_ratelimit()) { - printk(KERN_DEBUG "AP: drop packet to non-associated " - "STA %pM\n", hdr->addr1); - } -#endif - local->ap->tx_drop_nonassoc++; - ret = AP_TX_DROP; - goto out; - } - - if (sta == NULL) - goto out; - - if (!(sta->flags & WLAN_STA_AUTHORIZED)) - ret = AP_TX_CONTINUE_NOT_AUTHORIZED; - - /* Set tx_rate if using host-based TX rate control */ - if (!local->fw_tx_rate_control) - local->ap->last_tx_rate = meta->rate = - ap_update_sta_tx_rate(sta, local->dev); - - if (local->iw_mode != IW_MODE_MASTER) - goto out; - - if (!(sta->flags & WLAN_STA_PS)) - goto out; - - if (meta->flags & HOSTAP_TX_FLAGS_ADD_MOREDATA) { - /* indicate to STA that more frames follow */ - hdr->frame_control |= - cpu_to_le16(IEEE80211_FCTL_MOREDATA); - } - - if (meta->flags & HOSTAP_TX_FLAGS_BUFFERED_FRAME) { - /* packet was already buffered and now send due to - * PS poll, so do not rebuffer it */ - goto out; - } - - if (skb_queue_len(&sta->tx_buf) >= STA_MAX_TX_BUFFER) { - PDEBUG(DEBUG_PS, "%s: No more space in STA (%pM)'s" - "PS mode buffer\n", - local->dev->name, sta->addr); - /* Make sure that TIM is set for the station (it might not be - * after AP wlan hw reset). */ - /* FIX: should fix hw reset to restore bits based on STA - * buffer state.. */ - hostap_set_tim(local, sta->aid, 1); - sta->flags |= WLAN_STA_TIM; - ret = AP_TX_DROP; - goto out; - } - - /* STA in PS mode, buffer frame for later delivery */ - set_tim = skb_queue_empty(&sta->tx_buf); - skb_queue_tail(&sta->tx_buf, skb); - /* FIX: could save RX time to skb and expire buffered frames after - * some time if STA does not poll for them */ - - if (set_tim) { - if (sta->flags & WLAN_STA_TIM) - PDEBUG(DEBUG_PS2, "Re-setting TIM for aid %d\n", - sta->aid); - hostap_set_tim(local, sta->aid, 1); - sta->flags |= WLAN_STA_TIM; - } - - ret = AP_TX_BUFFERED; - - out: - if (sta != NULL) { - if (ret == AP_TX_CONTINUE || - ret == AP_TX_CONTINUE_NOT_AUTHORIZED) { - sta->tx_packets++; - sta->tx_bytes += skb->len; - sta->last_tx = jiffies; - } - - if ((ret == AP_TX_CONTINUE || - ret == AP_TX_CONTINUE_NOT_AUTHORIZED) && - sta->crypt && tx->host_encrypt) { - tx->crypt = sta->crypt; - tx->sta_ptr = sta; /* hostap_handle_sta_release() will - * be called to release sta info - * later */ - } else - atomic_dec(&sta->users); - } - - return ret; -} - - -void hostap_handle_sta_release(void *ptr) -{ - struct sta_info *sta = ptr; - atomic_dec(&sta->users); -} - - -/* Called only as a tasklet (software IRQ) */ -void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb) -{ - struct sta_info *sta; - struct ieee80211_hdr *hdr; - struct hostap_skb_tx_data *meta; - - hdr = (struct ieee80211_hdr *) skb->data; - meta = (struct hostap_skb_tx_data *) skb->cb; - - spin_lock(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr1); - if (!sta) { - spin_unlock(&local->ap->sta_table_lock); - PDEBUG(DEBUG_AP, "%s: Could not find STA %pM" - " for this TX error (@%lu)\n", - local->dev->name, hdr->addr1, jiffies); - return; - } - - sta->tx_since_last_failure = 0; - sta->tx_consecutive_exc++; - - if (sta->tx_consecutive_exc >= WLAN_RATE_DECREASE_THRESHOLD && - sta->tx_rate_idx > 0 && meta->rate <= sta->tx_rate) { - /* use next lower rate */ - int old, rate; - old = rate = sta->tx_rate_idx; - while (rate > 0) { - rate--; - if (ap_tx_rate_ok(rate, sta, local)) { - sta->tx_rate_idx = rate; - break; - } - } - if (old != sta->tx_rate_idx) { - switch (sta->tx_rate_idx) { - case 0: sta->tx_rate = 10; break; - case 1: sta->tx_rate = 20; break; - case 2: sta->tx_rate = 55; break; - case 3: sta->tx_rate = 110; break; - default: sta->tx_rate = 0; break; - } - PDEBUG(DEBUG_AP, - "%s: STA %pM TX rate lowered to %d\n", - local->dev->name, sta->addr, sta->tx_rate); - } - sta->tx_consecutive_exc = 0; - } - spin_unlock(&local->ap->sta_table_lock); -} - - -static void hostap_update_sta_ps2(local_info_t *local, struct sta_info *sta, - int pwrmgt, int type, int stype) -{ - if (pwrmgt && !(sta->flags & WLAN_STA_PS)) { - sta->flags |= WLAN_STA_PS; - PDEBUG(DEBUG_PS2, "STA %pM changed to use PS " - "mode (type=0x%02X, stype=0x%02X)\n", - sta->addr, type >> 2, stype >> 4); - } else if (!pwrmgt && (sta->flags & WLAN_STA_PS)) { - sta->flags &= ~WLAN_STA_PS; - PDEBUG(DEBUG_PS2, "STA %pM changed to not use " - "PS mode (type=0x%02X, stype=0x%02X)\n", - sta->addr, type >> 2, stype >> 4); - if (type != IEEE80211_FTYPE_CTL || - stype != IEEE80211_STYPE_PSPOLL) - schedule_packet_send(local, sta); - } -} - - -/* Called only as a tasklet (software IRQ). Called for each RX frame to update - * STA power saving state. pwrmgt is a flag from 802.11 frame_control field. */ -int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr) -{ - struct sta_info *sta; - u16 fc; - - spin_lock(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta) - atomic_inc(&sta->users); - spin_unlock(&local->ap->sta_table_lock); - - if (!sta) - return -1; - - fc = le16_to_cpu(hdr->frame_control); - hostap_update_sta_ps2(local, sta, fc & IEEE80211_FCTL_PM, - fc & IEEE80211_FCTL_FTYPE, - fc & IEEE80211_FCTL_STYPE); - - atomic_dec(&sta->users); - return 0; -} - - -/* Called only as a tasklet (software IRQ). Called for each RX frame after - * getting RX header and payload from hardware. */ -ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, - struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats, - int wds) -{ - int ret; - struct sta_info *sta; - u16 fc, type, stype; - struct ieee80211_hdr *hdr; - - if (local->ap == NULL) - return AP_RX_CONTINUE; - - hdr = (struct ieee80211_hdr *) skb->data; - - fc = le16_to_cpu(hdr->frame_control); - type = fc & IEEE80211_FCTL_FTYPE; - stype = fc & IEEE80211_FCTL_STYPE; - - spin_lock(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta) - atomic_inc(&sta->users); - spin_unlock(&local->ap->sta_table_lock); - - if (sta && !(sta->flags & WLAN_STA_AUTHORIZED)) - ret = AP_RX_CONTINUE_NOT_AUTHORIZED; - else - ret = AP_RX_CONTINUE; - - - if (fc & IEEE80211_FCTL_TODS) { - if (!wds && (sta == NULL || !(sta->flags & WLAN_STA_ASSOC))) { - if (local->hostapd) { - prism2_rx_80211(local->apdev, skb, rx_stats, - PRISM2_RX_NON_ASSOC); -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - } else { - printk(KERN_DEBUG "%s: dropped received packet" - " from non-associated STA %pM" - " (type=0x%02x, subtype=0x%02x)\n", - dev->name, hdr->addr2, - type >> 2, stype >> 4); - hostap_rx(dev, skb, rx_stats); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - } - ret = AP_RX_EXIT; - goto out; - } - } else if (fc & IEEE80211_FCTL_FROMDS) { - if (!wds) { - /* FromDS frame - not for us; probably - * broadcast/multicast in another BSS - drop */ - if (ether_addr_equal(hdr->addr1, dev->dev_addr)) { - printk(KERN_DEBUG "Odd.. FromDS packet " - "received with own BSSID\n"); - hostap_dump_rx_80211(dev->name, skb, rx_stats); - } - ret = AP_RX_DROP; - goto out; - } - } else if (stype == IEEE80211_STYPE_NULLFUNC && sta == NULL && - ether_addr_equal(hdr->addr1, dev->dev_addr)) { - - if (local->hostapd) { - prism2_rx_80211(local->apdev, skb, rx_stats, - PRISM2_RX_NON_ASSOC); -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - } else { - /* At least Lucent f/w seems to send data::nullfunc - * frames with no ToDS flag when the current AP returns - * after being unavailable for some time. Speed up - * re-association by informing the station about it not - * being associated. */ - printk(KERN_DEBUG "%s: rejected received nullfunc frame" - " without ToDS from not associated STA %pM\n", - dev->name, hdr->addr2); - hostap_rx(dev, skb, rx_stats); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - } - ret = AP_RX_EXIT; - goto out; - } else if (stype == IEEE80211_STYPE_NULLFUNC) { - /* At least Lucent cards seem to send periodic nullfunc - * frames with ToDS. Let these through to update SQ - * stats and PS state. Nullfunc frames do not contain - * any data and they will be dropped below. */ - } else { - /* If BSSID (Addr3) is foreign, this frame is a normal - * broadcast frame from an IBSS network. Drop it silently. - * If BSSID is own, report the dropping of this frame. */ - if (ether_addr_equal(hdr->addr3, dev->dev_addr)) { - printk(KERN_DEBUG "%s: dropped received packet from %pM" - " with no ToDS flag " - "(type=0x%02x, subtype=0x%02x)\n", dev->name, - hdr->addr2, type >> 2, stype >> 4); - hostap_dump_rx_80211(dev->name, skb, rx_stats); - } - ret = AP_RX_DROP; - goto out; - } - - if (sta) { - hostap_update_sta_ps2(local, sta, fc & IEEE80211_FCTL_PM, - type, stype); - - sta->rx_packets++; - sta->rx_bytes += skb->len; - sta->last_rx = jiffies; - } - - if (local->ap->nullfunc_ack && stype == IEEE80211_STYPE_NULLFUNC && - fc & IEEE80211_FCTL_TODS) { - if (local->hostapd) { - prism2_rx_80211(local->apdev, skb, rx_stats, - PRISM2_RX_NULLFUNC_ACK); -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - } else { - /* some STA f/w's seem to require control::ACK frame - * for data::nullfunc, but Prism2 f/w 0.8.0 (at least - * from Compaq) does not send this.. Try to generate - * ACK for these frames from the host driver to make - * power saving work with, e.g., Lucent WaveLAN f/w */ - hostap_rx(dev, skb, rx_stats); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - } - ret = AP_RX_EXIT; - goto out; - } - - out: - if (sta) - atomic_dec(&sta->users); - - return ret; -} - - -/* Called only as a tasklet (software IRQ) */ -int hostap_handle_sta_crypto(local_info_t *local, - struct ieee80211_hdr *hdr, - struct lib80211_crypt_data **crypt, - void **sta_ptr) -{ - struct sta_info *sta; - - spin_lock(&local->ap->sta_table_lock); - sta = ap_get_sta(local->ap, hdr->addr2); - if (sta) - atomic_inc(&sta->users); - spin_unlock(&local->ap->sta_table_lock); - - if (!sta) - return -1; - - if (sta->crypt) { - *crypt = sta->crypt; - *sta_ptr = sta; - /* hostap_handle_sta_release() will be called to release STA - * info */ - } else - atomic_dec(&sta->users); - - return 0; -} - - -/* Called only as a tasklet (software IRQ) */ -int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr) -{ - struct sta_info *sta; - int ret = 0; - - spin_lock(&ap->sta_table_lock); - sta = ap_get_sta(ap, sta_addr); - if (sta != NULL && (sta->flags & WLAN_STA_ASSOC) && !sta->ap) - ret = 1; - spin_unlock(&ap->sta_table_lock); - - return ret; -} - - -/* Called only as a tasklet (software IRQ) */ -int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr) -{ - struct sta_info *sta; - int ret = 0; - - spin_lock(&ap->sta_table_lock); - sta = ap_get_sta(ap, sta_addr); - if (sta != NULL && (sta->flags & WLAN_STA_ASSOC) && !sta->ap && - ((sta->flags & WLAN_STA_AUTHORIZED) || - ap->local->ieee_802_1x == 0)) - ret = 1; - spin_unlock(&ap->sta_table_lock); - - return ret; -} - - -/* Called only as a tasklet (software IRQ) */ -int hostap_add_sta(struct ap_data *ap, u8 *sta_addr) -{ - struct sta_info *sta; - int ret = 1; - - if (!ap) - return -1; - - spin_lock(&ap->sta_table_lock); - sta = ap_get_sta(ap, sta_addr); - if (sta) - ret = 0; - spin_unlock(&ap->sta_table_lock); - - if (ret == 1) { - sta = ap_add_sta(ap, sta_addr); - if (!sta) - return -1; - sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC; - sta->ap = 1; - memset(sta->supported_rates, 0, sizeof(sta->supported_rates)); - /* No way of knowing which rates are supported since we did not - * get supported rates element from beacon/assoc req. Assume - * that remote end supports all 802.11b rates. */ - sta->supported_rates[0] = 0x82; - sta->supported_rates[1] = 0x84; - sta->supported_rates[2] = 0x0b; - sta->supported_rates[3] = 0x16; - sta->tx_supp_rates = WLAN_RATE_1M | WLAN_RATE_2M | - WLAN_RATE_5M5 | WLAN_RATE_11M; - sta->tx_rate = 110; - sta->tx_max_rate = sta->tx_rate_idx = 3; - } - - return ret; -} - - -/* Called only as a tasklet (software IRQ) */ -int hostap_update_rx_stats(struct ap_data *ap, - struct ieee80211_hdr *hdr, - struct hostap_80211_rx_status *rx_stats) -{ - struct sta_info *sta; - - if (!ap) - return -1; - - spin_lock(&ap->sta_table_lock); - sta = ap_get_sta(ap, hdr->addr2); - if (sta) { - sta->last_rx_silence = rx_stats->noise; - sta->last_rx_signal = rx_stats->signal; - sta->last_rx_rate = rx_stats->rate; - sta->last_rx_updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; - if (rx_stats->rate == 10) - sta->rx_count[0]++; - else if (rx_stats->rate == 20) - sta->rx_count[1]++; - else if (rx_stats->rate == 55) - sta->rx_count[2]++; - else if (rx_stats->rate == 110) - sta->rx_count[3]++; - } - spin_unlock(&ap->sta_table_lock); - - return sta ? 0 : -1; -} - - -void hostap_update_rates(local_info_t *local) -{ - struct sta_info *sta; - struct ap_data *ap = local->ap; - - if (!ap) - return; - - spin_lock_bh(&ap->sta_table_lock); - list_for_each_entry(sta, &ap->sta_list, list) { - prism2_check_tx_rates(sta); - } - spin_unlock_bh(&ap->sta_table_lock); -} - - -void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, - struct lib80211_crypt_data ***crypt) -{ - struct sta_info *sta; - - spin_lock_bh(&ap->sta_table_lock); - sta = ap_get_sta(ap, addr); - if (sta) - atomic_inc(&sta->users); - spin_unlock_bh(&ap->sta_table_lock); - - if (!sta && permanent) - sta = ap_add_sta(ap, addr); - - if (!sta) - return NULL; - - if (permanent) - sta->flags |= WLAN_STA_PERM; - - *crypt = &sta->crypt; - - return sta; -} - - -void hostap_add_wds_links(local_info_t *local) -{ - struct ap_data *ap = local->ap; - struct sta_info *sta; - - spin_lock_bh(&ap->sta_table_lock); - list_for_each_entry(sta, &ap->sta_list, list) { - if (sta->ap) - hostap_wds_link_oper(local, sta->addr, WDS_ADD); - } - spin_unlock_bh(&ap->sta_table_lock); - - schedule_work(&local->ap->wds_oper_queue); -} - - -void hostap_wds_link_oper(local_info_t *local, u8 *addr, wds_oper_type type) -{ - struct wds_oper_data *entry; - - entry = kmalloc(sizeof(*entry), GFP_ATOMIC); - if (!entry) - return; - memcpy(entry->addr, addr, ETH_ALEN); - entry->type = type; - spin_lock_bh(&local->lock); - entry->next = local->ap->wds_oper_entries; - local->ap->wds_oper_entries = entry; - spin_unlock_bh(&local->lock); - - schedule_work(&local->ap->wds_oper_queue); -} - - -EXPORT_SYMBOL(hostap_init_data); -EXPORT_SYMBOL(hostap_init_ap_proc); -EXPORT_SYMBOL(hostap_free_data); -EXPORT_SYMBOL(hostap_check_sta_fw_version); -EXPORT_SYMBOL(hostap_handle_sta_tx_exc); -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_ap.h b/drivers/net/wireless/intersil/hostap/hostap_ap.h deleted file mode 100644 index b7ac9e2f1a..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_ap.h +++ /dev/null @@ -1,264 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef HOSTAP_AP_H -#define HOSTAP_AP_H - -#include "hostap_80211.h" - -/* AP data structures for STAs */ - -/* maximum number of frames to buffer per STA */ -#define STA_MAX_TX_BUFFER 32 - -/* STA flags */ -#define WLAN_STA_AUTH BIT(0) -#define WLAN_STA_ASSOC BIT(1) -#define WLAN_STA_PS BIT(2) -#define WLAN_STA_TIM BIT(3) /* TIM bit is on for PS stations */ -#define WLAN_STA_PERM BIT(4) /* permanent; do not remove entry on expiration */ -#define WLAN_STA_AUTHORIZED BIT(5) /* If 802.1X is used, this flag is - * controlling whether STA is authorized to - * send and receive non-IEEE 802.1X frames - */ -#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */ - -#define WLAN_RATE_1M BIT(0) -#define WLAN_RATE_2M BIT(1) -#define WLAN_RATE_5M5 BIT(2) -#define WLAN_RATE_11M BIT(3) -#define WLAN_RATE_COUNT 4 - -/* Maximum size of Supported Rates info element. IEEE 802.11 has a limit of 8, - * but some pre-standard IEEE 802.11g products use longer elements. */ -#define WLAN_SUPP_RATES_MAX 32 - -/* Try to increase TX rate after # successfully sent consecutive packets */ -#define WLAN_RATE_UPDATE_COUNT 50 - -/* Decrease TX rate after # consecutive dropped packets */ -#define WLAN_RATE_DECREASE_THRESHOLD 2 - -struct sta_info { - struct list_head list; - struct sta_info *hnext; /* next entry in hash table list */ - atomic_t users; /* number of users (do not remove if > 0) */ - struct proc_dir_entry *proc; - - u8 addr[6]; - u16 aid; /* STA's unique AID (1 .. 2007) or 0 if not yet assigned */ - u32 flags; - u16 capability; - u16 listen_interval; /* or beacon_int for APs */ - u8 supported_rates[WLAN_SUPP_RATES_MAX]; - - unsigned long last_auth; - unsigned long last_assoc; - unsigned long last_rx; - unsigned long last_tx; - unsigned long rx_packets, tx_packets; - unsigned long rx_bytes, tx_bytes; - struct sk_buff_head tx_buf; - /* FIX: timeout buffers with an expiry time somehow derived from - * listen_interval */ - - s8 last_rx_silence; /* Noise in dBm */ - s8 last_rx_signal; /* Signal strength in dBm */ - u8 last_rx_rate; /* TX rate in 0.1 Mbps */ - u8 last_rx_updated; /* IWSPY's struct iw_quality::updated */ - - u8 tx_supp_rates; /* bit field of supported TX rates */ - u8 tx_rate; /* current TX rate (in 0.1 Mbps) */ - u8 tx_rate_idx; /* current TX rate (WLAN_RATE_*) */ - u8 tx_max_rate; /* max TX rate (WLAN_RATE_*) */ - u32 tx_count[WLAN_RATE_COUNT]; /* number of frames sent (per rate) */ - u32 rx_count[WLAN_RATE_COUNT]; /* number of frames received (per rate) - */ - u32 tx_since_last_failure; - u32 tx_consecutive_exc; - - struct lib80211_crypt_data *crypt; - - int ap; /* whether this station is an AP */ - - local_info_t *local; - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - union { - struct { - char *challenge; /* shared key authentication - * challenge */ - } sta; - struct { - int ssid_len; - unsigned char ssid[MAX_SSID_LEN + 1]; /* AP's ssid */ - int channel; - unsigned long last_beacon; /* last RX beacon time */ - } ap; - } u; - - struct timer_list timer; - enum { STA_NULLFUNC = 0, STA_DISASSOC, STA_DEAUTH } timeout_next; -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ -}; - - -#define MAX_STA_COUNT 1024 - -/* Maximum number of AIDs to use for STAs; must be 2007 or lower - * (8802.11 limitation) */ -#define MAX_AID_TABLE_SIZE 128 - -#define STA_HASH_SIZE 256 -#define STA_HASH(sta) (sta[5]) - - -/* Default value for maximum station inactivity. After AP_MAX_INACTIVITY_SEC - * has passed since last received frame from the station, a nullfunc data - * frame is sent to the station. If this frame is not acknowledged and no other - * frames have been received, the station will be disassociated after - * AP_DISASSOC_DELAY. Similarly, a the station will be deauthenticated after - * AP_DEAUTH_DELAY. AP_TIMEOUT_RESOLUTION is the resolution that is used with - * max inactivity timer. */ -#define AP_MAX_INACTIVITY_SEC (5 * 60) -#define AP_DISASSOC_DELAY (HZ) -#define AP_DEAUTH_DELAY (HZ) - -/* ap_policy: whether to accept frames to/from other APs/IBSS */ -typedef enum { - AP_OTHER_AP_SKIP_ALL = 0, - AP_OTHER_AP_SAME_SSID = 1, - AP_OTHER_AP_ALL = 2, - AP_OTHER_AP_EVEN_IBSS = 3 -} ap_policy_enum; - -#define PRISM2_AUTH_OPEN BIT(0) -#define PRISM2_AUTH_SHARED_KEY BIT(1) - - -/* MAC address-based restrictions */ -struct mac_entry { - struct list_head list; - u8 addr[6]; -}; - -struct mac_restrictions { - enum { MAC_POLICY_OPEN = 0, MAC_POLICY_ALLOW, MAC_POLICY_DENY } policy; - unsigned int entries; - struct list_head mac_list; - spinlock_t lock; -}; - - -struct add_sta_proc_data { - u8 addr[ETH_ALEN]; - struct add_sta_proc_data *next; -}; - - -typedef enum { WDS_ADD, WDS_DEL } wds_oper_type; -struct wds_oper_data { - wds_oper_type type; - u8 addr[ETH_ALEN]; - struct wds_oper_data *next; -}; - - -struct ap_data { - int initialized; /* whether ap_data has been initialized */ - local_info_t *local; - int bridge_packets; /* send packet to associated STAs directly to the - * wireless media instead of higher layers in the - * kernel */ - unsigned int bridged_unicast; /* number of unicast frames bridged on - * wireless media */ - unsigned int bridged_multicast; /* number of non-unicast frames - * bridged on wireless media */ - unsigned int tx_drop_nonassoc; /* number of unicast TX packets dropped - * because they were to an address that - * was not associated */ - int nullfunc_ack; /* use workaround for nullfunc frame ACKs */ - - spinlock_t sta_table_lock; - int num_sta; /* number of entries in sta_list */ - struct list_head sta_list; /* STA info list head */ - struct sta_info *sta_hash[STA_HASH_SIZE]; - - struct proc_dir_entry *proc; - - ap_policy_enum ap_policy; - unsigned int max_inactivity; - int autom_ap_wds; - - struct mac_restrictions mac_restrictions; /* MAC-based auth */ - int last_tx_rate; - - struct work_struct add_sta_proc_queue; - struct add_sta_proc_data *add_sta_proc_entries; - - struct work_struct wds_oper_queue; - struct wds_oper_data *wds_oper_entries; - - u16 tx_callback_idx; - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - /* pointers to STA info; based on allocated AID or NULL if AID free - * AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1 - * and so on - */ - struct sta_info *sta_aid[MAX_AID_TABLE_SIZE]; - - u16 tx_callback_auth, tx_callback_assoc, tx_callback_poll; - - /* WEP operations for generating challenges to be used with shared key - * authentication */ - struct lib80211_crypto_ops *crypt; - void *crypt_priv; -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ -}; - - -void hostap_rx(struct net_device *dev, struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats); -void hostap_init_data(local_info_t *local); -void hostap_init_ap_proc(local_info_t *local); -void hostap_free_data(struct ap_data *ap); -void hostap_check_sta_fw_version(struct ap_data *ap, int sta_fw_ver); - -typedef enum { - AP_TX_CONTINUE, AP_TX_DROP, AP_TX_RETRY, AP_TX_BUFFERED, - AP_TX_CONTINUE_NOT_AUTHORIZED -} ap_tx_ret; -struct hostap_tx_data { - struct sk_buff *skb; - int host_encrypt; - struct lib80211_crypt_data *crypt; - void *sta_ptr; -}; -ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx); -void hostap_handle_sta_release(void *ptr); -void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb); -int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr); -typedef enum { - AP_RX_CONTINUE, AP_RX_DROP, AP_RX_EXIT, AP_RX_CONTINUE_NOT_AUTHORIZED -} ap_rx_ret; -ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, - struct sk_buff *skb, - struct hostap_80211_rx_status *rx_stats, - int wds); -int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr *hdr, - struct lib80211_crypt_data **crypt, - void **sta_ptr); -int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr); -int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr); -int hostap_add_sta(struct ap_data *ap, u8 *sta_addr); -int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr *hdr, - struct hostap_80211_rx_status *rx_stats); -void hostap_update_rates(local_info_t *local); -void hostap_add_wds_links(local_info_t *local); -void hostap_wds_link_oper(local_info_t *local, u8 *addr, wds_oper_type type); - -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT -void hostap_deauth_all_stas(struct net_device *dev, struct ap_data *ap, - int resend); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - -#endif /* HOSTAP_AP_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_common.h b/drivers/net/wireless/intersil/hostap/hostap_common.h deleted file mode 100644 index dd29a8e8d3..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_common.h +++ /dev/null @@ -1,420 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef HOSTAP_COMMON_H -#define HOSTAP_COMMON_H - -#include <linux/types.h> -#include <linux/if_ether.h> - -/* IEEE 802.11 defines */ - -/* HFA384X Configuration RIDs */ -#define HFA384X_RID_CNFPORTTYPE 0xFC00 -#define HFA384X_RID_CNFOWNMACADDR 0xFC01 -#define HFA384X_RID_CNFDESIREDSSID 0xFC02 -#define HFA384X_RID_CNFOWNCHANNEL 0xFC03 -#define HFA384X_RID_CNFOWNSSID 0xFC04 -#define HFA384X_RID_CNFOWNATIMWINDOW 0xFC05 -#define HFA384X_RID_CNFSYSTEMSCALE 0xFC06 -#define HFA384X_RID_CNFMAXDATALEN 0xFC07 -#define HFA384X_RID_CNFWDSADDRESS 0xFC08 -#define HFA384X_RID_CNFPMENABLED 0xFC09 -#define HFA384X_RID_CNFPMEPS 0xFC0A -#define HFA384X_RID_CNFMULTICASTRECEIVE 0xFC0B -#define HFA384X_RID_CNFMAXSLEEPDURATION 0xFC0C -#define HFA384X_RID_CNFPMHOLDOVERDURATION 0xFC0D -#define HFA384X_RID_CNFOWNNAME 0xFC0E -#define HFA384X_RID_CNFOWNDTIMPERIOD 0xFC10 -#define HFA384X_RID_CNFWDSADDRESS1 0xFC11 /* AP f/w only */ -#define HFA384X_RID_CNFWDSADDRESS2 0xFC12 /* AP f/w only */ -#define HFA384X_RID_CNFWDSADDRESS3 0xFC13 /* AP f/w only */ -#define HFA384X_RID_CNFWDSADDRESS4 0xFC14 /* AP f/w only */ -#define HFA384X_RID_CNFWDSADDRESS5 0xFC15 /* AP f/w only */ -#define HFA384X_RID_CNFWDSADDRESS6 0xFC16 /* AP f/w only */ -#define HFA384X_RID_CNFMULTICASTPMBUFFERING 0xFC17 /* AP f/w only */ -#define HFA384X_RID_UNKNOWN1 0xFC20 -#define HFA384X_RID_UNKNOWN2 0xFC21 -#define HFA384X_RID_CNFWEPDEFAULTKEYID 0xFC23 -#define HFA384X_RID_CNFDEFAULTKEY0 0xFC24 -#define HFA384X_RID_CNFDEFAULTKEY1 0xFC25 -#define HFA384X_RID_CNFDEFAULTKEY2 0xFC26 -#define HFA384X_RID_CNFDEFAULTKEY3 0xFC27 -#define HFA384X_RID_CNFWEPFLAGS 0xFC28 -#define HFA384X_RID_CNFWEPKEYMAPPINGTABLE 0xFC29 -#define HFA384X_RID_CNFAUTHENTICATION 0xFC2A -#define HFA384X_RID_CNFMAXASSOCSTA 0xFC2B /* AP f/w only */ -#define HFA384X_RID_CNFTXCONTROL 0xFC2C -#define HFA384X_RID_CNFROAMINGMODE 0xFC2D -#define HFA384X_RID_CNFHOSTAUTHENTICATION 0xFC2E /* AP f/w only */ -#define HFA384X_RID_CNFRCVCRCERROR 0xFC30 -#define HFA384X_RID_CNFMMLIFE 0xFC31 -#define HFA384X_RID_CNFALTRETRYCOUNT 0xFC32 -#define HFA384X_RID_CNFBEACONINT 0xFC33 -#define HFA384X_RID_CNFAPPCFINFO 0xFC34 /* AP f/w only */ -#define HFA384X_RID_CNFSTAPCFINFO 0xFC35 -#define HFA384X_RID_CNFPRIORITYQUSAGE 0xFC37 -#define HFA384X_RID_CNFTIMCTRL 0xFC40 -#define HFA384X_RID_UNKNOWN3 0xFC41 /* added in STA f/w 0.7.x */ -#define HFA384X_RID_CNFTHIRTY2TALLY 0xFC42 /* added in STA f/w 0.8.0 */ -#define HFA384X_RID_CNFENHSECURITY 0xFC43 /* AP f/w or STA f/w >= 1.6.3 */ -#define HFA384X_RID_CNFDBMADJUST 0xFC46 /* added in STA f/w 1.3.1 */ -#define HFA384X_RID_GENERICELEMENT 0xFC48 /* added in STA f/w 1.7.0; - * write only */ -#define HFA384X_RID_PROPAGATIONDELAY 0xFC49 /* added in STA f/w 1.7.6 */ -#define HFA384X_RID_GROUPADDRESSES 0xFC80 -#define HFA384X_RID_CREATEIBSS 0xFC81 -#define HFA384X_RID_FRAGMENTATIONTHRESHOLD 0xFC82 -#define HFA384X_RID_RTSTHRESHOLD 0xFC83 -#define HFA384X_RID_TXRATECONTROL 0xFC84 -#define HFA384X_RID_PROMISCUOUSMODE 0xFC85 -#define HFA384X_RID_FRAGMENTATIONTHRESHOLD0 0xFC90 /* AP f/w only */ -#define HFA384X_RID_FRAGMENTATIONTHRESHOLD1 0xFC91 /* AP f/w only */ -#define HFA384X_RID_FRAGMENTATIONTHRESHOLD2 0xFC92 /* AP f/w only */ -#define HFA384X_RID_FRAGMENTATIONTHRESHOLD3 0xFC93 /* AP f/w only */ -#define HFA384X_RID_FRAGMENTATIONTHRESHOLD4 0xFC94 /* AP f/w only */ -#define HFA384X_RID_FRAGMENTATIONTHRESHOLD5 0xFC95 /* AP f/w only */ -#define HFA384X_RID_FRAGMENTATIONTHRESHOLD6 0xFC96 /* AP f/w only */ -#define HFA384X_RID_RTSTHRESHOLD0 0xFC97 /* AP f/w only */ -#define HFA384X_RID_RTSTHRESHOLD1 0xFC98 /* AP f/w only */ -#define HFA384X_RID_RTSTHRESHOLD2 0xFC99 /* AP f/w only */ -#define HFA384X_RID_RTSTHRESHOLD3 0xFC9A /* AP f/w only */ -#define HFA384X_RID_RTSTHRESHOLD4 0xFC9B /* AP f/w only */ -#define HFA384X_RID_RTSTHRESHOLD5 0xFC9C /* AP f/w only */ -#define HFA384X_RID_RTSTHRESHOLD6 0xFC9D /* AP f/w only */ -#define HFA384X_RID_TXRATECONTROL0 0xFC9E /* AP f/w only */ -#define HFA384X_RID_TXRATECONTROL1 0xFC9F /* AP f/w only */ -#define HFA384X_RID_TXRATECONTROL2 0xFCA0 /* AP f/w only */ -#define HFA384X_RID_TXRATECONTROL3 0xFCA1 /* AP f/w only */ -#define HFA384X_RID_TXRATECONTROL4 0xFCA2 /* AP f/w only */ -#define HFA384X_RID_TXRATECONTROL5 0xFCA3 /* AP f/w only */ -#define HFA384X_RID_TXRATECONTROL6 0xFCA4 /* AP f/w only */ -#define HFA384X_RID_CNFSHORTPREAMBLE 0xFCB0 -#define HFA384X_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1 -#define HFA384X_RID_CNFAUTHENTICATIONRSPTO 0xFCB2 -#define HFA384X_RID_CNFBASICRATES 0xFCB3 -#define HFA384X_RID_CNFSUPPORTEDRATES 0xFCB4 -#define HFA384X_RID_CNFFALLBACKCTRL 0xFCB5 /* added in STA f/w 1.3.1 */ -#define HFA384X_RID_WEPKEYDISABLE 0xFCB6 /* added in STA f/w 1.3.1 */ -#define HFA384X_RID_WEPKEYMAPINDEX 0xFCB7 /* ? */ -#define HFA384X_RID_BROADCASTKEYID 0xFCB8 /* ? */ -#define HFA384X_RID_ENTSECFLAGEYID 0xFCB9 /* ? */ -#define HFA384X_RID_CNFPASSIVESCANCTRL 0xFCBA /* added in STA f/w 1.5.0 */ -#define HFA384X_RID_SSNHANDLINGMODE 0xFCBB /* added in STA f/w 1.7.0 */ -#define HFA384X_RID_MDCCONTROL 0xFCBC /* added in STA f/w 1.7.0 */ -#define HFA384X_RID_MDCCOUNTRY 0xFCBD /* added in STA f/w 1.7.0 */ -#define HFA384X_RID_TXPOWERMAX 0xFCBE /* added in STA f/w 1.7.0 */ -#define HFA384X_RID_CNFLFOENABLED 0xFCBF /* added in STA f/w 1.6.3 */ -#define HFA384X_RID_CAPINFO 0xFCC0 /* added in STA f/w 1.7.0 */ -#define HFA384X_RID_LISTENINTERVAL 0xFCC1 /* added in STA f/w 1.7.0 */ -#define HFA384X_RID_SW_ANT_DIV 0xFCC2 /* added in STA f/w 1.7.0; Prism3 */ -#define HFA384X_RID_LED_CTRL 0xFCC4 /* added in STA f/w 1.7.6 */ -#define HFA384X_RID_HFODELAY 0xFCC5 /* added in STA f/w 1.7.6 */ -#define HFA384X_RID_DISALLOWEDBSSID 0xFCC6 /* added in STA f/w 1.8.0 */ -#define HFA384X_RID_TICKTIME 0xFCE0 -#define HFA384X_RID_SCANREQUEST 0xFCE1 -#define HFA384X_RID_JOINREQUEST 0xFCE2 -#define HFA384X_RID_AUTHENTICATESTATION 0xFCE3 /* AP f/w only */ -#define HFA384X_RID_CHANNELINFOREQUEST 0xFCE4 /* AP f/w only */ -#define HFA384X_RID_HOSTSCAN 0xFCE5 /* added in STA f/w 1.3.1 */ - -/* HFA384X Information RIDs */ -#define HFA384X_RID_MAXLOADTIME 0xFD00 -#define HFA384X_RID_DOWNLOADBUFFER 0xFD01 -#define HFA384X_RID_PRIID 0xFD02 -#define HFA384X_RID_PRISUPRANGE 0xFD03 -#define HFA384X_RID_CFIACTRANGES 0xFD04 -#define HFA384X_RID_NICSERNUM 0xFD0A -#define HFA384X_RID_NICID 0xFD0B -#define HFA384X_RID_MFISUPRANGE 0xFD0C -#define HFA384X_RID_CFISUPRANGE 0xFD0D -#define HFA384X_RID_CHANNELLIST 0xFD10 -#define HFA384X_RID_REGULATORYDOMAINS 0xFD11 -#define HFA384X_RID_TEMPTYPE 0xFD12 -#define HFA384X_RID_CIS 0xFD13 -#define HFA384X_RID_STAID 0xFD20 -#define HFA384X_RID_STASUPRANGE 0xFD21 -#define HFA384X_RID_MFIACTRANGES 0xFD22 -#define HFA384X_RID_CFIACTRANGES2 0xFD23 -#define HFA384X_RID_PRODUCTNAME 0xFD24 /* added in STA f/w 1.3.1; - * only Prism2.5(?) */ -#define HFA384X_RID_PORTSTATUS 0xFD40 -#define HFA384X_RID_CURRENTSSID 0xFD41 -#define HFA384X_RID_CURRENTBSSID 0xFD42 -#define HFA384X_RID_COMMSQUALITY 0xFD43 -#define HFA384X_RID_CURRENTTXRATE 0xFD44 -#define HFA384X_RID_CURRENTBEACONINTERVAL 0xFD45 -#define HFA384X_RID_CURRENTSCALETHRESHOLDS 0xFD46 -#define HFA384X_RID_PROTOCOLRSPTIME 0xFD47 -#define HFA384X_RID_SHORTRETRYLIMIT 0xFD48 -#define HFA384X_RID_LONGRETRYLIMIT 0xFD49 -#define HFA384X_RID_MAXTRANSMITLIFETIME 0xFD4A -#define HFA384X_RID_MAXRECEIVELIFETIME 0xFD4B -#define HFA384X_RID_CFPOLLABLE 0xFD4C -#define HFA384X_RID_AUTHENTICATIONALGORITHMS 0xFD4D -#define HFA384X_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F -#define HFA384X_RID_DBMCOMMSQUALITY 0xFD51 /* added in STA f/w 1.3.1 */ -#define HFA384X_RID_CURRENTTXRATE1 0xFD80 /* AP f/w only */ -#define HFA384X_RID_CURRENTTXRATE2 0xFD81 /* AP f/w only */ -#define HFA384X_RID_CURRENTTXRATE3 0xFD82 /* AP f/w only */ -#define HFA384X_RID_CURRENTTXRATE4 0xFD83 /* AP f/w only */ -#define HFA384X_RID_CURRENTTXRATE5 0xFD84 /* AP f/w only */ -#define HFA384X_RID_CURRENTTXRATE6 0xFD85 /* AP f/w only */ -#define HFA384X_RID_OWNMACADDR 0xFD86 /* AP f/w only */ -#define HFA384X_RID_SCANRESULTSTABLE 0xFD88 /* added in STA f/w 0.8.3 */ -#define HFA384X_RID_HOSTSCANRESULTS 0xFD89 /* added in STA f/w 1.3.1 */ -#define HFA384X_RID_AUTHENTICATIONUSED 0xFD8A /* added in STA f/w 1.3.4 */ -#define HFA384X_RID_CNFFAASWITCHCTRL 0xFD8B /* added in STA f/w 1.6.3 */ -#define HFA384X_RID_ASSOCIATIONFAILURE 0xFD8D /* added in STA f/w 1.8.0 */ -#define HFA384X_RID_PHYTYPE 0xFDC0 -#define HFA384X_RID_CURRENTCHANNEL 0xFDC1 -#define HFA384X_RID_CURRENTPOWERSTATE 0xFDC2 -#define HFA384X_RID_CCAMODE 0xFDC3 -#define HFA384X_RID_SUPPORTEDDATARATES 0xFDC6 -#define HFA384X_RID_LFO_VOLT_REG_TEST_RES 0xFDC7 /* added in STA f/w 1.7.1 */ -#define HFA384X_RID_BUILDSEQ 0xFFFE -#define HFA384X_RID_FWID 0xFFFF - - -struct hfa384x_comp_ident -{ - __le16 id; - __le16 variant; - __le16 major; - __le16 minor; -} __packed; - -#define HFA384X_COMP_ID_PRI 0x15 -#define HFA384X_COMP_ID_STA 0x1f -#define HFA384X_COMP_ID_FW_AP 0x14b - -struct hfa384x_sup_range -{ - __le16 role; - __le16 id; - __le16 variant; - __le16 bottom; - __le16 top; -} __packed; - - -struct hfa384x_build_id -{ - __le16 pri_seq; - __le16 sec_seq; -} __packed; - -/* FD01 - Download Buffer */ -struct hfa384x_rid_download_buffer -{ - __le16 page; - __le16 offset; - __le16 length; -} __packed; - -/* BSS connection quality (RID FD43 range, RID FD51 dBm-normalized) */ -struct hfa384x_comms_quality { - __le16 comm_qual; /* 0 .. 92 */ - __le16 signal_level; /* 27 .. 154 */ - __le16 noise_level; /* 27 .. 154 */ -} __packed; - - -/* netdevice private ioctls (used, e.g., with iwpriv from user space) */ - -/* New wireless extensions API - SET/GET convention (even ioctl numbers are - * root only) - */ -#define PRISM2_IOCTL_PRISM2_PARAM (SIOCIWFIRSTPRIV + 0) -#define PRISM2_IOCTL_GET_PRISM2_PARAM (SIOCIWFIRSTPRIV + 1) -#define PRISM2_IOCTL_WRITEMIF (SIOCIWFIRSTPRIV + 2) -#define PRISM2_IOCTL_READMIF (SIOCIWFIRSTPRIV + 3) -#define PRISM2_IOCTL_MONITOR (SIOCIWFIRSTPRIV + 4) -#define PRISM2_IOCTL_RESET (SIOCIWFIRSTPRIV + 6) -#define PRISM2_IOCTL_INQUIRE (SIOCIWFIRSTPRIV + 8) -#define PRISM2_IOCTL_WDS_ADD (SIOCIWFIRSTPRIV + 10) -#define PRISM2_IOCTL_WDS_DEL (SIOCIWFIRSTPRIV + 12) -#define PRISM2_IOCTL_SET_RID_WORD (SIOCIWFIRSTPRIV + 14) -#define PRISM2_IOCTL_MACCMD (SIOCIWFIRSTPRIV + 16) -#define PRISM2_IOCTL_ADDMAC (SIOCIWFIRSTPRIV + 18) -#define PRISM2_IOCTL_DELMAC (SIOCIWFIRSTPRIV + 20) -#define PRISM2_IOCTL_KICKMAC (SIOCIWFIRSTPRIV + 22) - -/* following are not in SIOCGIWPRIV list; check permission in the driver code - */ -#define PRISM2_IOCTL_DOWNLOAD (SIOCDEVPRIVATE + 13) -#define PRISM2_IOCTL_HOSTAPD (SIOCDEVPRIVATE + 14) - - -/* PRISM2_IOCTL_PRISM2_PARAM ioctl() subtypes: */ -enum { - /* PRISM2_PARAM_PTYPE = 1, */ /* REMOVED 2003-10-22 */ - PRISM2_PARAM_TXRATECTRL = 2, - PRISM2_PARAM_BEACON_INT = 3, - PRISM2_PARAM_PSEUDO_IBSS = 4, - PRISM2_PARAM_ALC = 5, - /* PRISM2_PARAM_TXPOWER = 6, */ /* REMOVED 2003-10-22 */ - PRISM2_PARAM_DUMP = 7, - PRISM2_PARAM_OTHER_AP_POLICY = 8, - PRISM2_PARAM_AP_MAX_INACTIVITY = 9, - PRISM2_PARAM_AP_BRIDGE_PACKETS = 10, - PRISM2_PARAM_DTIM_PERIOD = 11, - PRISM2_PARAM_AP_NULLFUNC_ACK = 12, - PRISM2_PARAM_MAX_WDS = 13, - PRISM2_PARAM_AP_AUTOM_AP_WDS = 14, - PRISM2_PARAM_AP_AUTH_ALGS = 15, - PRISM2_PARAM_MONITOR_ALLOW_FCSERR = 16, - PRISM2_PARAM_HOST_ENCRYPT = 17, - PRISM2_PARAM_HOST_DECRYPT = 18, - /* PRISM2_PARAM_BUS_MASTER_THRESHOLD_RX = 19, REMOVED 2005-08-14 */ - /* PRISM2_PARAM_BUS_MASTER_THRESHOLD_TX = 20, REMOVED 2005-08-14 */ - PRISM2_PARAM_HOST_ROAMING = 21, - PRISM2_PARAM_BCRX_STA_KEY = 22, - PRISM2_PARAM_IEEE_802_1X = 23, - PRISM2_PARAM_ANTSEL_TX = 24, - PRISM2_PARAM_ANTSEL_RX = 25, - PRISM2_PARAM_MONITOR_TYPE = 26, - PRISM2_PARAM_WDS_TYPE = 27, - PRISM2_PARAM_HOSTSCAN = 28, - PRISM2_PARAM_AP_SCAN = 29, - PRISM2_PARAM_ENH_SEC = 30, - PRISM2_PARAM_IO_DEBUG = 31, - PRISM2_PARAM_BASIC_RATES = 32, - PRISM2_PARAM_OPER_RATES = 33, - PRISM2_PARAM_HOSTAPD = 34, - PRISM2_PARAM_HOSTAPD_STA = 35, - PRISM2_PARAM_WPA = 36, - PRISM2_PARAM_PRIVACY_INVOKED = 37, - PRISM2_PARAM_TKIP_COUNTERMEASURES = 38, - PRISM2_PARAM_DROP_UNENCRYPTED = 39, - PRISM2_PARAM_SCAN_CHANNEL_MASK = 40, -}; - -enum { HOSTAP_ANTSEL_DO_NOT_TOUCH = 0, HOSTAP_ANTSEL_DIVERSITY = 1, - HOSTAP_ANTSEL_LOW = 2, HOSTAP_ANTSEL_HIGH = 3 }; - - -/* PRISM2_IOCTL_MACCMD ioctl() subcommands: */ -enum { AP_MAC_CMD_POLICY_OPEN = 0, AP_MAC_CMD_POLICY_ALLOW = 1, - AP_MAC_CMD_POLICY_DENY = 2, AP_MAC_CMD_FLUSH = 3, - AP_MAC_CMD_KICKALL = 4 }; - - -/* PRISM2_IOCTL_DOWNLOAD ioctl() dl_cmd: */ -enum { - PRISM2_DOWNLOAD_VOLATILE = 1 /* RAM */, - /* Note! Old versions of prism2_srec have a fatal error in CRC-16 - * calculation, which will corrupt all non-volatile downloads. - * PRISM2_DOWNLOAD_NON_VOLATILE used to be 2, but it is now 3 to - * prevent use of old versions of prism2_srec for non-volatile - * download. */ - PRISM2_DOWNLOAD_NON_VOLATILE = 3 /* FLASH */, - PRISM2_DOWNLOAD_VOLATILE_GENESIS = 4 /* RAM in Genesis mode */, - /* Persistent versions of volatile download commands (keep firmware - * data in memory and automatically re-download after hw_reset */ - PRISM2_DOWNLOAD_VOLATILE_PERSISTENT = 5, - PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT = 6, -}; - -struct prism2_download_param { - u32 dl_cmd; - u32 start_addr; - u32 num_areas; - struct prism2_download_area { - u32 addr; /* wlan card address */ - u32 len; - void __user *ptr; /* pointer to data in user space */ - } data[]; -}; - -#define PRISM2_MAX_DOWNLOAD_AREA_LEN 131072 -#define PRISM2_MAX_DOWNLOAD_LEN 262144 - - -/* PRISM2_IOCTL_HOSTAPD ioctl() cmd: */ -enum { - PRISM2_HOSTAPD_FLUSH = 1, - PRISM2_HOSTAPD_ADD_STA = 2, - PRISM2_HOSTAPD_REMOVE_STA = 3, - PRISM2_HOSTAPD_GET_INFO_STA = 4, - /* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */ - PRISM2_SET_ENCRYPTION = 6, - PRISM2_GET_ENCRYPTION = 7, - PRISM2_HOSTAPD_SET_FLAGS_STA = 8, - PRISM2_HOSTAPD_GET_RID = 9, - PRISM2_HOSTAPD_SET_RID = 10, - PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR = 11, - PRISM2_HOSTAPD_SET_GENERIC_ELEMENT = 12, - PRISM2_HOSTAPD_MLME = 13, - PRISM2_HOSTAPD_SCAN_REQ = 14, - PRISM2_HOSTAPD_STA_CLEAR_STATS = 15, -}; - -#define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024 -#define PRISM2_HOSTAPD_RID_HDR_LEN \ -offsetof(struct prism2_hostapd_param, u.rid.data) -#define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \ -offsetof(struct prism2_hostapd_param, u.generic_elem.data) - -/* Maximum length for algorithm names (-1 for nul termination) used in ioctl() - */ -#define HOSTAP_CRYPT_ALG_NAME_LEN 16 - - -struct prism2_hostapd_param { - u32 cmd; - u8 sta_addr[ETH_ALEN]; - union { - struct { - u16 aid; - u16 capability; - u8 tx_supp_rates; - } add_sta; - struct { - u32 inactive_sec; - } get_info_sta; - struct { - u8 alg[HOSTAP_CRYPT_ALG_NAME_LEN]; - u32 flags; - u32 err; - u8 idx; - u8 seq[8]; /* sequence counter (set: RX, get: TX) */ - u16 key_len; - u8 key[0]; - } crypt; - struct { - u32 flags_and; - u32 flags_or; - } set_flags_sta; - struct { - u16 rid; - u16 len; - u8 data[0]; - } rid; - struct { - u8 len; - u8 data[0]; - } generic_elem; - struct { -#define MLME_STA_DEAUTH 0 -#define MLME_STA_DISASSOC 1 - u16 cmd; - u16 reason_code; - } mlme; - struct { - u8 ssid_len; - u8 ssid[32]; - } scan_req; - } u; -}; - -#define HOSTAP_CRYPT_FLAG_SET_TX_KEY BIT(0) -#define HOSTAP_CRYPT_FLAG_PERMANENT BIT(1) - -#define HOSTAP_CRYPT_ERR_UNKNOWN_ALG 2 -#define HOSTAP_CRYPT_ERR_UNKNOWN_ADDR 3 -#define HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED 4 -#define HOSTAP_CRYPT_ERR_KEY_SET_FAILED 5 -#define HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED 6 -#define HOSTAP_CRYPT_ERR_CARD_CONF_FAILED 7 - - -#endif /* HOSTAP_COMMON_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_config.h b/drivers/net/wireless/intersil/hostap/hostap_config.h deleted file mode 100644 index 3ebd55847f..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_config.h +++ /dev/null @@ -1,49 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef HOSTAP_CONFIG_H -#define HOSTAP_CONFIG_H - -/* In the previous versions of Host AP driver, support for user space version - * of IEEE 802.11 management (hostapd) used to be disabled in the default - * configuration. From now on, support for hostapd is always included and it is - * possible to disable kernel driver version of IEEE 802.11 management with a - * separate define, PRISM2_NO_KERNEL_IEEE80211_MGMT. */ -/* #define PRISM2_NO_KERNEL_IEEE80211_MGMT */ - -/* Maximum number of events handler per one interrupt */ -#define PRISM2_MAX_INTERRUPT_EVENTS 20 - -/* Include code for downloading firmware images into volatile RAM. */ -#define PRISM2_DOWNLOAD_SUPPORT - -/* Allow kernel configuration to enable download support. */ -#if !defined(PRISM2_DOWNLOAD_SUPPORT) && defined(CONFIG_HOSTAP_FIRMWARE) -#define PRISM2_DOWNLOAD_SUPPORT -#endif - -/* Allow kernel configuration to enable non-volatile download support. */ -#ifdef CONFIG_HOSTAP_FIRMWARE_NVRAM -#define PRISM2_NON_VOLATILE_DOWNLOAD -#endif - -/* Save low-level I/O for debugging. This should not be enabled in normal use. - */ -/* #define PRISM2_IO_DEBUG */ - -/* Following defines can be used to remove unneeded parts of the driver, e.g., - * to limit the size of the kernel module. Definitions can be added here in - * hostap_config.h or they can be added to make command with ccflags-y, - * e.g., - * 'make pccard ccflags-y="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"' - */ - -/* Do not include debug messages into the driver */ -/* #define PRISM2_NO_DEBUG */ - -/* Do not include /proc/net/prism2/wlan#/{registers,debug} */ -/* #define PRISM2_NO_PROCFS_DEBUG */ - -/* Do not include station functionality (i.e., allow only Master (Host AP) mode - */ -/* #define PRISM2_NO_STATION_MODES */ - -#endif /* HOSTAP_CONFIG_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_cs.c b/drivers/net/wireless/intersil/hostap/hostap_cs.c deleted file mode 100644 index ec7db2badc..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_cs.c +++ /dev/null @@ -1,710 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#define PRISM2_PCCARD - -#include <linux/module.h> -#include <linux/if.h> -#include <linux/slab.h> -#include <linux/wait.h> -#include <linux/timer.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/workqueue.h> -#include <linux/wireless.h> -#include <net/iw_handler.h> - -#include <pcmcia/cistpl.h> -#include <pcmcia/cisreg.h> -#include <pcmcia/ds.h> - -#include <asm/io.h> - -#include "hostap_wlan.h" - - -static char *dev_info = "hostap_cs"; - -MODULE_AUTHOR("Jouni Malinen"); -MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN " - "cards (PC Card)."); -MODULE_LICENSE("GPL"); - - -static int ignore_cis_vcc; -module_param(ignore_cis_vcc, int, 0444); -MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry"); - - -/* struct local_info::hw_priv */ -struct hostap_cs_priv { - struct pcmcia_device *link; - int sandisk_connectplus; -}; - - -#ifdef PRISM2_IO_DEBUG - -static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); - outb(v, dev->base_addr + a); - spin_unlock_irqrestore(&local->lock, flags); -} - -static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - u8 v; - - iface = netdev_priv(dev); - local = iface->local; - spin_lock_irqsave(&local->lock, flags); - v = inb(dev->base_addr + a); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); - spin_unlock_irqrestore(&local->lock, flags); - return v; -} - -static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); - outw(v, dev->base_addr + a); - spin_unlock_irqrestore(&local->lock, flags); -} - -static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - u16 v; - - iface = netdev_priv(dev); - local = iface->local; - spin_lock_irqsave(&local->lock, flags); - v = inw(dev->base_addr + a); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); - spin_unlock_irqrestore(&local->lock, flags); - return v; -} - -static inline void hfa384x_outsw_debug(struct net_device *dev, int a, - u8 *buf, int wc) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc); - outsw(dev->base_addr + a, buf, wc); - spin_unlock_irqrestore(&local->lock, flags); -} - -static inline void hfa384x_insw_debug(struct net_device *dev, int a, - u8 *buf, int wc) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc); - insw(dev->base_addr + a, buf, wc); - spin_unlock_irqrestore(&local->lock, flags); -} - -#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) -#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) -#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) -#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) -#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc)) -#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc)) - -#else /* PRISM2_IO_DEBUG */ - -#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a)) -#define HFA384X_INB(a) inb(dev->base_addr + (a)) -#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a)) -#define HFA384X_INW(a) inw(dev->base_addr + (a)) -#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc) -#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc) - -#endif /* PRISM2_IO_DEBUG */ - - -static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, - int len) -{ - u16 d_off; - u16 *pos; - - d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; - pos = (u16 *) buf; - - if (len / 2) - HFA384X_INSW(d_off, buf, len / 2); - pos += len / 2; - - if (len & 1) - *((char *) pos) = HFA384X_INB(d_off); - - return 0; -} - - -static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) -{ - u16 d_off; - u16 *pos; - - d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; - pos = (u16 *) buf; - - if (len / 2) - HFA384X_OUTSW(d_off, buf, len / 2); - pos += len / 2; - - if (len & 1) - HFA384X_OUTB(*((char *) pos), d_off); - - return 0; -} - - -/* FIX: This might change at some point.. */ -#include "hostap_hw.c" - - - -static void prism2_detach(struct pcmcia_device *p_dev); -static void prism2_release(u_long arg); -static int prism2_config(struct pcmcia_device *link); - - -static int prism2_pccard_card_present(local_info_t *local) -{ - struct hostap_cs_priv *hw_priv = local->hw_priv; - if (hw_priv != NULL && hw_priv->link != NULL && pcmcia_dev_present(hw_priv->link)) - return 1; - return 0; -} - - -/* - * SanDisk CompactFlash WLAN Flashcard - Product Manual v1.0 - * Document No. 20-10-00058, January 2004 - * http://www.sandisk.com/pdf/industrial/ProdManualCFWLANv1.0.pdf - */ -#define SANDISK_WLAN_ACTIVATION_OFF 0x40 -#define SANDISK_HCR_OFF 0x42 - - -static void sandisk_set_iobase(local_info_t *local) -{ - int res; - struct hostap_cs_priv *hw_priv = local->hw_priv; - - res = pcmcia_write_config_byte(hw_priv->link, 0x10, - hw_priv->link->resource[0]->start & 0x00ff); - if (res != 0) { - printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -" - " res=%d\n", res); - } - udelay(10); - - res = pcmcia_write_config_byte(hw_priv->link, 0x12, - (hw_priv->link->resource[0]->start >> 8) & 0x00ff); - if (res != 0) { - printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -" - " res=%d\n", res); - } -} - - -static void sandisk_write_hcr(local_info_t *local, int hcr) -{ - struct net_device *dev = local->dev; - int i; - - HFA384X_OUTB(0x80, SANDISK_WLAN_ACTIVATION_OFF); - udelay(50); - for (i = 0; i < 10; i++) { - HFA384X_OUTB(hcr, SANDISK_HCR_OFF); - } - udelay(55); - HFA384X_OUTB(0x45, SANDISK_WLAN_ACTIVATION_OFF); -} - - -static int sandisk_enable_wireless(struct net_device *dev) -{ - int res, ret = 0; - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - struct hostap_cs_priv *hw_priv = local->hw_priv; - - if (resource_size(hw_priv->link->resource[0]) < 0x42) { - /* Not enough ports to be SanDisk multi-function card */ - ret = -ENODEV; - goto done; - } - - if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) { - /* No SanDisk manfid found */ - ret = -ENODEV; - goto done; - } - - if (hw_priv->link->socket->functions < 2) { - /* No multi-function links found */ - ret = -ENODEV; - goto done; - } - - printk(KERN_DEBUG "%s: Multi-function SanDisk ConnectPlus detected" - " - using vendor-specific initialization\n", dev->name); - hw_priv->sandisk_connectplus = 1; - - res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, - COR_SOFT_RESET); - if (res != 0) { - printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", - dev->name, res); - goto done; - } - mdelay(5); - - /* - * Do not enable interrupts here to avoid some bogus events. Interrupts - * will be enabled during the first cor_sreset call. - */ - res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, - (COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | - COR_FUNC_ENA)); - if (res != 0) { - printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", - dev->name, res); - goto done; - } - mdelay(5); - - sandisk_set_iobase(local); - - HFA384X_OUTB(0xc5, SANDISK_WLAN_ACTIVATION_OFF); - udelay(10); - HFA384X_OUTB(0x4b, SANDISK_WLAN_ACTIVATION_OFF); - udelay(10); - -done: - return ret; -} - - -static void prism2_pccard_cor_sreset(local_info_t *local) -{ - int res; - u8 val; - struct hostap_cs_priv *hw_priv = local->hw_priv; - - if (!prism2_pccard_card_present(local)) - return; - - res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &val); - if (res != 0) { - printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n", - res); - return; - } - printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n", - val); - - val |= COR_SOFT_RESET; - res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val); - if (res != 0) { - printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n", - res); - return; - } - - mdelay(hw_priv->sandisk_connectplus ? 5 : 2); - - val &= ~COR_SOFT_RESET; - if (hw_priv->sandisk_connectplus) - val |= COR_IREQ_ENA; - res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val); - if (res != 0) { - printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n", - res); - return; - } - - mdelay(hw_priv->sandisk_connectplus ? 5 : 2); - - if (hw_priv->sandisk_connectplus) - sandisk_set_iobase(local); -} - - -static void prism2_pccard_genesis_reset(local_info_t *local, int hcr) -{ - int res; - u8 old_cor; - struct hostap_cs_priv *hw_priv = local->hw_priv; - - if (!prism2_pccard_card_present(local)) - return; - - if (hw_priv->sandisk_connectplus) { - sandisk_write_hcr(local, hcr); - return; - } - - res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &old_cor); - if (res != 0) { - printk(KERN_DEBUG "%s failed 1 (%d)\n", __func__, res); - return; - } - printk(KERN_DEBUG "%s: original COR %02x\n", __func__, old_cor); - - res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, - old_cor | COR_SOFT_RESET); - if (res != 0) { - printk(KERN_DEBUG "%s failed 2 (%d)\n", __func__, res); - return; - } - - mdelay(10); - - /* Setup Genesis mode */ - res = pcmcia_write_config_byte(hw_priv->link, CISREG_CCSR, hcr); - if (res != 0) { - printk(KERN_DEBUG "%s failed 3 (%d)\n", __func__, res); - return; - } - mdelay(10); - - res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, - old_cor & ~COR_SOFT_RESET); - if (res != 0) { - printk(KERN_DEBUG "%s failed 4 (%d)\n", __func__, res); - return; - } - - mdelay(10); -} - - -static struct prism2_helper_functions prism2_pccard_funcs = -{ - .card_present = prism2_pccard_card_present, - .cor_sreset = prism2_pccard_cor_sreset, - .genesis_reset = prism2_pccard_genesis_reset, - .hw_type = HOSTAP_HW_PCCARD, -}; - - -/* allocate local data and register with CardServices - * initialize dev_link structure, but do not configure the card yet */ -static int hostap_cs_probe(struct pcmcia_device *p_dev) -{ - int ret; - - PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); - - ret = prism2_config(p_dev); - if (ret) { - PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n"); - } - - return ret; -} - - -static void prism2_detach(struct pcmcia_device *link) -{ - PDEBUG(DEBUG_FLOW, "prism2_detach\n"); - - prism2_release((u_long)link); - - /* release net devices */ - if (link->priv) { - struct hostap_cs_priv *hw_priv; - struct net_device *dev; - struct hostap_interface *iface; - dev = link->priv; - iface = netdev_priv(dev); - hw_priv = iface->local->hw_priv; - prism2_free_local_data(dev); - kfree(hw_priv); - } -} - - -static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) -{ - if (p_dev->config_index == 0) - return -EINVAL; - - return pcmcia_request_io(p_dev); -} - -static int prism2_config(struct pcmcia_device *link) -{ - struct net_device *dev; - struct hostap_interface *iface; - local_info_t *local; - int ret; - struct hostap_cs_priv *hw_priv; - unsigned long flags; - - PDEBUG(DEBUG_FLOW, "prism2_config()\n"); - - hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL); - if (hw_priv == NULL) { - ret = -ENOMEM; - goto failed; - } - - /* Look for an appropriate configuration table entry in the CIS */ - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | - CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; - if (ignore_cis_vcc) - link->config_flags &= ~CONF_AUTO_CHECK_VCC; - ret = pcmcia_loop_config(link, prism2_config_check, NULL); - if (ret) { - if (!ignore_cis_vcc) - printk(KERN_ERR "GetNextTuple(): No matching " - "CIS configuration. Maybe you need the " - "ignore_cis_vcc=1 parameter.\n"); - goto failed; - } - - /* Need to allocate net_device before requesting IRQ handler */ - dev = prism2_init_local_data(&prism2_pccard_funcs, 0, - &link->dev); - if (!dev) { - ret = -ENOMEM; - goto failed; - } - link->priv = dev; - - iface = netdev_priv(dev); - local = iface->local; - local->hw_priv = hw_priv; - hw_priv->link = link; - - /* - * We enable IRQ here, but IRQ handler will not proceed - * until dev->base_addr is set below. This protect us from - * receive interrupts when driver is not initialized. - */ - ret = pcmcia_request_irq(link, prism2_interrupt); - if (ret) - goto failed; - - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - spin_lock_irqsave(&local->irq_init_lock, flags); - dev->irq = link->irq; - dev->base_addr = link->resource[0]->start; - spin_unlock_irqrestore(&local->irq_init_lock, flags); - - local->shutdown = 0; - - sandisk_enable_wireless(dev); - - ret = prism2_hw_config(dev, 1); - if (!ret) - ret = hostap_hw_ready(dev); - - return ret; - - failed: - kfree(hw_priv); - prism2_release((u_long)link); - return ret; -} - - -static void prism2_release(u_long arg) -{ - struct pcmcia_device *link = (struct pcmcia_device *)arg; - - PDEBUG(DEBUG_FLOW, "prism2_release\n"); - - if (link->priv) { - struct net_device *dev = link->priv; - struct hostap_interface *iface; - - iface = netdev_priv(dev); - prism2_hw_shutdown(dev, 0); - iface->local->shutdown = 1; - } - - pcmcia_disable_device(link); - PDEBUG(DEBUG_FLOW, "release - done\n"); -} - -static int hostap_cs_suspend(struct pcmcia_device *link) -{ - struct net_device *dev = (struct net_device *) link->priv; - int dev_open = 0; - struct hostap_interface *iface = NULL; - - if (!dev) - return -ENODEV; - - iface = netdev_priv(dev); - - PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info); - if (iface && iface->local) - dev_open = iface->local->num_dev_open > 0; - if (dev_open) { - netif_stop_queue(dev); - netif_device_detach(dev); - } - prism2_suspend(dev); - - return 0; -} - -static int hostap_cs_resume(struct pcmcia_device *link) -{ - struct net_device *dev = (struct net_device *) link->priv; - int dev_open = 0; - struct hostap_interface *iface = NULL; - - if (!dev) - return -ENODEV; - - iface = netdev_priv(dev); - - PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info); - - if (iface && iface->local) - dev_open = iface->local->num_dev_open > 0; - - prism2_hw_shutdown(dev, 1); - prism2_hw_config(dev, dev_open ? 0 : 1); - if (dev_open) { - netif_device_attach(dev); - netif_start_queue(dev); - } - - return 0; -} - -static const struct pcmcia_device_id hostap_cs_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), - PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), - PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), - PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3301), - PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b), - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001), - PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001), - PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), -/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */ - PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010), - PCMCIA_DEVICE_MANF_CARD(0x0126, 0x0002), - PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0xd601, 0x0005, "ADLINK 345 CF", - 0x2d858104), - PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL", - 0x74c5e40d), - PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil", - 0x4b801a17), - PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.02", - 0x4b74baa0), - PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus", - 0x7a954bd9, 0x74be00c6), - PCMCIA_DEVICE_PROD_ID123( - "Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02", - 0xe6ec52ce, 0x08649af2, 0x4b74baa0), - PCMCIA_DEVICE_PROD_ID123( - "Canon", "Wireless LAN CF Card K30225", "Version 01.00", - 0x96ef6fe2, 0x263fcbab, 0xa57adb8c), - PCMCIA_DEVICE_PROD_ID123( - "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02", - 0x71b18589, 0xb6f1b0ab, 0x4b74baa0), - PCMCIA_DEVICE_PROD_ID123( - "Instant Wireless ", " Network PC CARD", "Version 01.02", - 0x11d901af, 0x6e9bd926, 0x4b74baa0), - PCMCIA_DEVICE_PROD_ID123( - "SMC", "SMC2632W", "Version 01.02", - 0xc4f8b18b, 0x474a1f2a, 0x4b74baa0), - PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", - 0x2decece3, 0x82067c18), - PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", - 0x54f7c49c, 0x15a75e5b), - PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", - 0x74c5e40d, 0xdb472a18), - PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", - 0x0733cc81, 0x0c52f395), - PCMCIA_DEVICE_PROD_ID12( - "ZoomAir 11Mbps High", "Rate wireless Networking", - 0x273fe3db, 0x32a1eaee), - PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", - 0xa37434e9, 0x9762e8f1), - PCMCIA_DEVICE_PROD_ID123( - "Pretec", "CompactWLAN Card 802.11b", "2.5", - 0x1cadd3e5, 0xe697636c, 0x7a5bfcf1), - PCMCIA_DEVICE_PROD_ID123( - "U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02", - 0xc7b8df9d, 0x1700d087, 0x4b74baa0), - PCMCIA_DEVICE_PROD_ID123( - "Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", - "Ver. 1.00", - 0x5cd01705, 0x4271660f, 0x9d08ee12), - PCMCIA_DEVICE_PROD_ID123( - "Wireless LAN" , "11Mbps PC Card", "Version 01.02", - 0x4b8870ff, 0x70e946d1, 0x4b74baa0), - PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092), - PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2), - PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b), - PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39), - PCMCIA_DEVICE_NULL -}; -MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids); - - -static struct pcmcia_driver hostap_driver = { - .name = "hostap_cs", - .probe = hostap_cs_probe, - .remove = prism2_detach, - .owner = THIS_MODULE, - .id_table = hostap_cs_ids, - .suspend = hostap_cs_suspend, - .resume = hostap_cs_resume, -}; -module_pcmcia_driver(hostap_driver); diff --git a/drivers/net/wireless/intersil/hostap/hostap_download.c b/drivers/net/wireless/intersil/hostap/hostap_download.c deleted file mode 100644 index 5e5bada28b..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_download.c +++ /dev/null @@ -1,810 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -static int prism2_enable_aux_port(struct net_device *dev, int enable) -{ - u16 val, reg; - int i, tries; - unsigned long flags; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->no_pri) { - if (enable) { - PDEBUG(DEBUG_EXTRA2, "%s: no PRI f/w - assuming Aux " - "port is already enabled\n", dev->name); - } - return 0; - } - - spin_lock_irqsave(&local->cmdlock, flags); - - /* wait until busy bit is clear */ - tries = HFA384X_CMD_BUSY_TIMEOUT; - while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { - tries--; - udelay(1); - } - if (tries == 0) { - reg = HFA384X_INW(HFA384X_CMD_OFF); - spin_unlock_irqrestore(&local->cmdlock, flags); - printk("%s: prism2_enable_aux_port - timeout - reg=0x%04x\n", - dev->name, reg); - return -ETIMEDOUT; - } - - val = HFA384X_INW(HFA384X_CONTROL_OFF); - - if (enable) { - HFA384X_OUTW(HFA384X_AUX_MAGIC0, HFA384X_PARAM0_OFF); - HFA384X_OUTW(HFA384X_AUX_MAGIC1, HFA384X_PARAM1_OFF); - HFA384X_OUTW(HFA384X_AUX_MAGIC2, HFA384X_PARAM2_OFF); - - if ((val & HFA384X_AUX_PORT_MASK) != HFA384X_AUX_PORT_DISABLED) - printk("prism2_enable_aux_port: was not disabled!?\n"); - val &= ~HFA384X_AUX_PORT_MASK; - val |= HFA384X_AUX_PORT_ENABLE; - } else { - HFA384X_OUTW(0, HFA384X_PARAM0_OFF); - HFA384X_OUTW(0, HFA384X_PARAM1_OFF); - HFA384X_OUTW(0, HFA384X_PARAM2_OFF); - - if ((val & HFA384X_AUX_PORT_MASK) != HFA384X_AUX_PORT_ENABLED) - printk("prism2_enable_aux_port: was not enabled!?\n"); - val &= ~HFA384X_AUX_PORT_MASK; - val |= HFA384X_AUX_PORT_DISABLE; - } - HFA384X_OUTW(val, HFA384X_CONTROL_OFF); - - udelay(5); - - i = 10000; - while (i > 0) { - val = HFA384X_INW(HFA384X_CONTROL_OFF); - val &= HFA384X_AUX_PORT_MASK; - - if ((enable && val == HFA384X_AUX_PORT_ENABLED) || - (!enable && val == HFA384X_AUX_PORT_DISABLED)) - break; - - udelay(10); - i--; - } - - spin_unlock_irqrestore(&local->cmdlock, flags); - - if (i == 0) { - printk("prism2_enable_aux_port(%d) timed out\n", - enable); - return -ETIMEDOUT; - } - - return 0; -} - - -static int hfa384x_from_aux(struct net_device *dev, unsigned int addr, int len, - void *buf) -{ - u16 page, offset; - if (addr & 1 || len & 1) - return -1; - - page = addr >> 7; - offset = addr & 0x7f; - - HFA384X_OUTW(page, HFA384X_AUXPAGE_OFF); - HFA384X_OUTW(offset, HFA384X_AUXOFFSET_OFF); - - udelay(5); - -#ifdef PRISM2_PCI - { - __le16 *pos = (__le16 *) buf; - while (len > 0) { - *pos++ = HFA384X_INW_DATA(HFA384X_AUXDATA_OFF); - len -= 2; - } - } -#else /* PRISM2_PCI */ - HFA384X_INSW(HFA384X_AUXDATA_OFF, buf, len / 2); -#endif /* PRISM2_PCI */ - - return 0; -} - - -static int hfa384x_to_aux(struct net_device *dev, unsigned int addr, int len, - void *buf) -{ - u16 page, offset; - if (addr & 1 || len & 1) - return -1; - - page = addr >> 7; - offset = addr & 0x7f; - - HFA384X_OUTW(page, HFA384X_AUXPAGE_OFF); - HFA384X_OUTW(offset, HFA384X_AUXOFFSET_OFF); - - udelay(5); - -#ifdef PRISM2_PCI - { - __le16 *pos = (__le16 *) buf; - while (len > 0) { - HFA384X_OUTW_DATA(*pos++, HFA384X_AUXDATA_OFF); - len -= 2; - } - } -#else /* PRISM2_PCI */ - HFA384X_OUTSW(HFA384X_AUXDATA_OFF, buf, len / 2); -#endif /* PRISM2_PCI */ - - return 0; -} - - -static int prism2_pda_ok(u8 *buf) -{ - __le16 *pda = (__le16 *) buf; - int pos; - u16 len, pdr; - - if (buf[0] == 0xff && buf[1] == 0x00 && buf[2] == 0xff && - buf[3] == 0x00) - return 0; - - pos = 0; - while (pos + 1 < PRISM2_PDA_SIZE / 2) { - len = le16_to_cpu(pda[pos]); - pdr = le16_to_cpu(pda[pos + 1]); - if (len == 0 || pos + len > PRISM2_PDA_SIZE / 2) - return 0; - - if (pdr == 0x0000 && len == 2) { - /* PDA end found */ - return 1; - } - - pos += len + 1; - } - - return 0; -} - - -#define prism2_download_aux_dump_npages 65536 - -struct prism2_download_aux_dump { - local_info_t *local; - u16 page[0x80]; -}; - -static int prism2_download_aux_dump_proc_show(struct seq_file *m, void *v) -{ - struct prism2_download_aux_dump *ctx = m->private; - - hfa384x_from_aux(ctx->local->dev, (unsigned long)v - 1, 0x80, ctx->page); - seq_write(m, ctx->page, 0x80); - return 0; -} - -static void *prism2_download_aux_dump_proc_start(struct seq_file *m, loff_t *_pos) -{ - struct prism2_download_aux_dump *ctx = m->private; - prism2_enable_aux_port(ctx->local->dev, 1); - if (*_pos >= prism2_download_aux_dump_npages) - return NULL; - return (void *)((unsigned long)*_pos + 1); -} - -static void *prism2_download_aux_dump_proc_next(struct seq_file *m, void *v, loff_t *_pos) -{ - ++*_pos; - if (*_pos >= prism2_download_aux_dump_npages) - return NULL; - return (void *)((unsigned long)*_pos + 1); -} - -static void prism2_download_aux_dump_proc_stop(struct seq_file *m, void *v) -{ - struct prism2_download_aux_dump *ctx = m->private; - prism2_enable_aux_port(ctx->local->dev, 0); -} - -static const struct seq_operations prism2_download_aux_dump_proc_seqops = { - .start = prism2_download_aux_dump_proc_start, - .next = prism2_download_aux_dump_proc_next, - .stop = prism2_download_aux_dump_proc_stop, - .show = prism2_download_aux_dump_proc_show, -}; - -static int prism2_download_aux_dump_proc_open(struct inode *inode, struct file *file) -{ - int ret = seq_open_private(file, &prism2_download_aux_dump_proc_seqops, - sizeof(struct prism2_download_aux_dump)); - if (ret == 0) { - struct seq_file *m = file->private_data; - m->private = pde_data(inode); - } - return ret; -} - -static const struct proc_ops prism2_download_aux_dump_proc_ops = { - .proc_open = prism2_download_aux_dump_proc_open, - .proc_read = seq_read, - .proc_lseek = seq_lseek, - .proc_release = seq_release_private, -}; - - -static u8 * prism2_read_pda(struct net_device *dev) -{ - u8 *buf; - int res, i, found = 0; -#define NUM_PDA_ADDRS 4 - unsigned int pda_addr[NUM_PDA_ADDRS] = { - 0x7f0000 /* others than HFA3841 */, - 0x3f0000 /* HFA3841 */, - 0x390000 /* apparently used in older cards */, - 0x7f0002 /* Intel PRO/Wireless 2011B (PCI) */, - }; - - buf = kmalloc(PRISM2_PDA_SIZE, GFP_KERNEL); - if (buf == NULL) - return NULL; - - /* Note: wlan card should be in initial state (just after init cmd) - * and no other operations should be performed concurrently. */ - - prism2_enable_aux_port(dev, 1); - - for (i = 0; i < NUM_PDA_ADDRS; i++) { - PDEBUG(DEBUG_EXTRA2, "%s: trying to read PDA from 0x%08x", - dev->name, pda_addr[i]); - res = hfa384x_from_aux(dev, pda_addr[i], PRISM2_PDA_SIZE, buf); - if (res) - continue; - if (res == 0 && prism2_pda_ok(buf)) { - PDEBUG2(DEBUG_EXTRA2, ": OK\n"); - found = 1; - break; - } else { - PDEBUG2(DEBUG_EXTRA2, ": failed\n"); - } - } - - prism2_enable_aux_port(dev, 0); - - if (!found) { - printk(KERN_DEBUG "%s: valid PDA not found\n", dev->name); - kfree(buf); - buf = NULL; - } - - return buf; -} - - -static int prism2_download_volatile(local_info_t *local, - struct prism2_download_data *param) -{ - struct net_device *dev = local->dev; - int ret = 0, i; - u16 param0, param1; - - if (local->hw_downloading) { - printk(KERN_WARNING "%s: Already downloading - aborting new " - "request\n", dev->name); - return -1; - } - - local->hw_downloading = 1; - if (local->pri_only) { - hfa384x_disable_interrupts(dev); - } else { - prism2_hw_shutdown(dev, 0); - - if (prism2_hw_init(dev, 0)) { - printk(KERN_WARNING "%s: Could not initialize card for" - " download\n", dev->name); - ret = -1; - goto out; - } - } - - if (prism2_enable_aux_port(dev, 1)) { - printk(KERN_WARNING "%s: Could not enable AUX port\n", - dev->name); - ret = -1; - goto out; - } - - param0 = param->start_addr & 0xffff; - param1 = param->start_addr >> 16; - - HFA384X_OUTW(0, HFA384X_PARAM2_OFF); - HFA384X_OUTW(param1, HFA384X_PARAM1_OFF); - if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | - (HFA384X_PROGMODE_ENABLE_VOLATILE << 8), - param0)) { - printk(KERN_WARNING "%s: Download command execution failed\n", - dev->name); - ret = -1; - goto out; - } - - for (i = 0; i < param->num_areas; i++) { - PDEBUG(DEBUG_EXTRA2, "%s: Writing %d bytes at 0x%08x\n", - dev->name, param->data[i].len, param->data[i].addr); - if (hfa384x_to_aux(dev, param->data[i].addr, - param->data[i].len, param->data[i].data)) { - printk(KERN_WARNING "%s: RAM download at 0x%08x " - "(len=%d) failed\n", dev->name, - param->data[i].addr, param->data[i].len); - ret = -1; - goto out; - } - } - - HFA384X_OUTW(param1, HFA384X_PARAM1_OFF); - HFA384X_OUTW(0, HFA384X_PARAM2_OFF); - if (hfa384x_cmd_no_wait(dev, HFA384X_CMDCODE_DOWNLOAD | - (HFA384X_PROGMODE_DISABLE << 8), param0)) { - printk(KERN_WARNING "%s: Download command execution failed\n", - dev->name); - ret = -1; - goto out; - } - /* ProgMode disable causes the hardware to restart itself from the - * given starting address. Give hw some time and ACK command just in - * case restart did not happen. */ - mdelay(5); - HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); - - if (prism2_enable_aux_port(dev, 0)) { - printk(KERN_DEBUG "%s: Disabling AUX port failed\n", - dev->name); - /* continue anyway.. restart should have taken care of this */ - } - - mdelay(5); - local->hw_downloading = 0; - if (prism2_hw_config(dev, 2)) { - printk(KERN_WARNING "%s: Card configuration after RAM " - "download failed\n", dev->name); - ret = -1; - goto out; - } - - out: - local->hw_downloading = 0; - return ret; -} - - -static int prism2_enable_genesis(local_info_t *local, int hcr) -{ - struct net_device *dev = local->dev; - u8 initseq[4] = { 0x00, 0xe1, 0xa1, 0xff }; - u8 readbuf[4]; - - printk(KERN_DEBUG "%s: test Genesis mode with HCR 0x%02x\n", - dev->name, hcr); - local->func->cor_sreset(local); - hfa384x_to_aux(dev, 0x7e0038, sizeof(initseq), initseq); - local->func->genesis_reset(local, hcr); - - /* Readback test */ - hfa384x_from_aux(dev, 0x7e0038, sizeof(readbuf), readbuf); - hfa384x_to_aux(dev, 0x7e0038, sizeof(initseq), initseq); - hfa384x_from_aux(dev, 0x7e0038, sizeof(readbuf), readbuf); - - if (memcmp(initseq, readbuf, sizeof(initseq)) == 0) { - printk(KERN_DEBUG "Readback test succeeded, HCR 0x%02x\n", - hcr); - return 0; - } else { - printk(KERN_DEBUG "Readback test failed, HCR 0x%02x write %4ph read %4ph\n", - hcr, initseq, readbuf); - return 1; - } -} - - -static int prism2_get_ram_size(local_info_t *local) -{ - int ret; - - /* Try to enable genesis mode; 0x1F for x8 SRAM or 0x0F for x16 SRAM */ - if (prism2_enable_genesis(local, 0x1f) == 0) - ret = 8; - else if (prism2_enable_genesis(local, 0x0f) == 0) - ret = 16; - else - ret = -1; - - /* Disable genesis mode */ - local->func->genesis_reset(local, ret == 16 ? 0x07 : 0x17); - - return ret; -} - - -static int prism2_download_genesis(local_info_t *local, - struct prism2_download_data *param) -{ - struct net_device *dev = local->dev; - int ram16 = 0, i; - int ret = 0; - - if (local->hw_downloading) { - printk(KERN_WARNING "%s: Already downloading - aborting new " - "request\n", dev->name); - return -EBUSY; - } - - if (!local->func->genesis_reset || !local->func->cor_sreset) { - printk(KERN_INFO "%s: Genesis mode downloading not supported " - "with this hwmodel\n", dev->name); - return -EOPNOTSUPP; - } - - local->hw_downloading = 1; - - if (prism2_enable_aux_port(dev, 1)) { - printk(KERN_DEBUG "%s: failed to enable AUX port\n", - dev->name); - ret = -EIO; - goto out; - } - - if (local->sram_type == -1) { - /* 0x1F for x8 SRAM or 0x0F for x16 SRAM */ - if (prism2_enable_genesis(local, 0x1f) == 0) { - ram16 = 0; - PDEBUG(DEBUG_EXTRA2, "%s: Genesis mode OK using x8 " - "SRAM\n", dev->name); - } else if (prism2_enable_genesis(local, 0x0f) == 0) { - ram16 = 1; - PDEBUG(DEBUG_EXTRA2, "%s: Genesis mode OK using x16 " - "SRAM\n", dev->name); - } else { - printk(KERN_DEBUG "%s: Could not initiate genesis " - "mode\n", dev->name); - ret = -EIO; - goto out; - } - } else { - if (prism2_enable_genesis(local, local->sram_type == 8 ? - 0x1f : 0x0f)) { - printk(KERN_DEBUG "%s: Failed to set Genesis " - "mode (sram_type=%d)\n", dev->name, - local->sram_type); - ret = -EIO; - goto out; - } - ram16 = local->sram_type != 8; - } - - for (i = 0; i < param->num_areas; i++) { - PDEBUG(DEBUG_EXTRA2, "%s: Writing %d bytes at 0x%08x\n", - dev->name, param->data[i].len, param->data[i].addr); - if (hfa384x_to_aux(dev, param->data[i].addr, - param->data[i].len, param->data[i].data)) { - printk(KERN_WARNING "%s: RAM download at 0x%08x " - "(len=%d) failed\n", dev->name, - param->data[i].addr, param->data[i].len); - ret = -EIO; - goto out; - } - } - - PDEBUG(DEBUG_EXTRA2, "Disable genesis mode\n"); - local->func->genesis_reset(local, ram16 ? 0x07 : 0x17); - if (prism2_enable_aux_port(dev, 0)) { - printk(KERN_DEBUG "%s: Failed to disable AUX port\n", - dev->name); - } - - mdelay(5); - local->hw_downloading = 0; - - PDEBUG(DEBUG_EXTRA2, "Trying to initialize card\n"); - /* - * Make sure the INIT command does not generate a command completion - * event by disabling interrupts. - */ - hfa384x_disable_interrupts(dev); - if (prism2_hw_init(dev, 1)) { - printk(KERN_DEBUG "%s: Initialization after genesis mode " - "download failed\n", dev->name); - ret = -EIO; - goto out; - } - - PDEBUG(DEBUG_EXTRA2, "Card initialized - running PRI only\n"); - if (prism2_hw_init2(dev, 1)) { - printk(KERN_DEBUG "%s: Initialization(2) after genesis mode " - "download failed\n", dev->name); - ret = -EIO; - goto out; - } - - out: - local->hw_downloading = 0; - return ret; -} - - -#ifdef PRISM2_NON_VOLATILE_DOWNLOAD -/* Note! Non-volatile downloading functionality has not yet been tested - * thoroughly and it may corrupt flash image and effectively kill the card that - * is being updated. You have been warned. */ - -static inline int prism2_download_block(struct net_device *dev, - u32 addr, u8 *data, - u32 bufaddr, int rest_len) -{ - u16 param0, param1; - int block_len; - - block_len = rest_len < 4096 ? rest_len : 4096; - - param0 = addr & 0xffff; - param1 = addr >> 16; - - HFA384X_OUTW(block_len, HFA384X_PARAM2_OFF); - HFA384X_OUTW(param1, HFA384X_PARAM1_OFF); - - if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | - (HFA384X_PROGMODE_ENABLE_NON_VOLATILE << 8), - param0)) { - printk(KERN_WARNING "%s: Flash download command execution " - "failed\n", dev->name); - return -1; - } - - if (hfa384x_to_aux(dev, bufaddr, block_len, data)) { - printk(KERN_WARNING "%s: flash download at 0x%08x " - "(len=%d) failed\n", dev->name, addr, block_len); - return -1; - } - - HFA384X_OUTW(0, HFA384X_PARAM2_OFF); - HFA384X_OUTW(0, HFA384X_PARAM1_OFF); - if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | - (HFA384X_PROGMODE_PROGRAM_NON_VOLATILE << 8), - 0)) { - printk(KERN_WARNING "%s: Flash write command execution " - "failed\n", dev->name); - return -1; - } - - return block_len; -} - - -static int prism2_download_nonvolatile(local_info_t *local, - struct prism2_download_data *dl) -{ - struct net_device *dev = local->dev; - int ret = 0, i; - struct { - __le16 page; - __le16 offset; - __le16 len; - } dlbuffer; - u32 bufaddr; - - if (local->hw_downloading) { - printk(KERN_WARNING "%s: Already downloading - aborting new " - "request\n", dev->name); - return -1; - } - - ret = local->func->get_rid(dev, HFA384X_RID_DOWNLOADBUFFER, - &dlbuffer, 6, 0); - - if (ret < 0) { - printk(KERN_WARNING "%s: Could not read download buffer " - "parameters\n", dev->name); - goto out; - } - - printk(KERN_DEBUG "Download buffer: %d bytes at 0x%04x:0x%04x\n", - le16_to_cpu(dlbuffer.len), - le16_to_cpu(dlbuffer.page), - le16_to_cpu(dlbuffer.offset)); - - bufaddr = (le16_to_cpu(dlbuffer.page) << 7) + le16_to_cpu(dlbuffer.offset); - - local->hw_downloading = 1; - - if (!local->pri_only) { - prism2_hw_shutdown(dev, 0); - - if (prism2_hw_init(dev, 0)) { - printk(KERN_WARNING "%s: Could not initialize card for" - " download\n", dev->name); - ret = -1; - goto out; - } - } - - hfa384x_disable_interrupts(dev); - - if (prism2_enable_aux_port(dev, 1)) { - printk(KERN_WARNING "%s: Could not enable AUX port\n", - dev->name); - ret = -1; - goto out; - } - - printk(KERN_DEBUG "%s: starting flash download\n", dev->name); - for (i = 0; i < dl->num_areas; i++) { - int rest_len = dl->data[i].len; - int data_off = 0; - - while (rest_len > 0) { - int block_len; - - block_len = prism2_download_block( - dev, dl->data[i].addr + data_off, - dl->data[i].data + data_off, bufaddr, - rest_len); - - if (block_len < 0) { - ret = -1; - goto out; - } - - rest_len -= block_len; - data_off += block_len; - } - } - - HFA384X_OUTW(0, HFA384X_PARAM1_OFF); - HFA384X_OUTW(0, HFA384X_PARAM2_OFF); - if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | - (HFA384X_PROGMODE_DISABLE << 8), 0)) { - printk(KERN_WARNING "%s: Download command execution failed\n", - dev->name); - ret = -1; - goto out; - } - - if (prism2_enable_aux_port(dev, 0)) { - printk(KERN_DEBUG "%s: Disabling AUX port failed\n", - dev->name); - /* continue anyway.. restart should have taken care of this */ - } - - mdelay(5); - - local->func->hw_reset(dev); - local->hw_downloading = 0; - if (prism2_hw_config(dev, 2)) { - printk(KERN_WARNING "%s: Card configuration after flash " - "download failed\n", dev->name); - ret = -1; - } else { - printk(KERN_INFO "%s: Card initialized successfully after " - "flash download\n", dev->name); - } - - out: - local->hw_downloading = 0; - return ret; -} -#endif /* PRISM2_NON_VOLATILE_DOWNLOAD */ - - -static void prism2_download_free_data(struct prism2_download_data *dl) -{ - int i; - - if (dl == NULL) - return; - - for (i = 0; i < dl->num_areas; i++) - kfree(dl->data[i].data); - kfree(dl); -} - - -static int prism2_download(local_info_t *local, - struct prism2_download_param *param) -{ - int ret = 0; - int i; - u32 total_len = 0; - struct prism2_download_data *dl = NULL; - - printk(KERN_DEBUG "prism2_download: dl_cmd=%d start_addr=0x%08x " - "num_areas=%d\n", - param->dl_cmd, param->start_addr, param->num_areas); - - if (param->num_areas > 100) { - ret = -EINVAL; - goto out; - } - - dl = kzalloc(struct_size(dl, data, param->num_areas), GFP_KERNEL); - if (dl == NULL) { - ret = -ENOMEM; - goto out; - } - dl->dl_cmd = param->dl_cmd; - dl->start_addr = param->start_addr; - dl->num_areas = param->num_areas; - for (i = 0; i < param->num_areas; i++) { - PDEBUG(DEBUG_EXTRA2, - " area %d: addr=0x%08x len=%d ptr=0x%p\n", - i, param->data[i].addr, param->data[i].len, - param->data[i].ptr); - - dl->data[i].addr = param->data[i].addr; - dl->data[i].len = param->data[i].len; - - total_len += param->data[i].len; - if (param->data[i].len > PRISM2_MAX_DOWNLOAD_AREA_LEN || - total_len > PRISM2_MAX_DOWNLOAD_LEN) { - ret = -E2BIG; - goto out; - } - - dl->data[i].data = kmalloc(dl->data[i].len, GFP_KERNEL); - if (dl->data[i].data == NULL) { - ret = -ENOMEM; - goto out; - } - - if (copy_from_user(dl->data[i].data, param->data[i].ptr, - param->data[i].len)) { - ret = -EFAULT; - goto out; - } - } - - switch (param->dl_cmd) { - case PRISM2_DOWNLOAD_VOLATILE: - case PRISM2_DOWNLOAD_VOLATILE_PERSISTENT: - ret = prism2_download_volatile(local, dl); - break; - case PRISM2_DOWNLOAD_VOLATILE_GENESIS: - case PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT: - ret = prism2_download_genesis(local, dl); - break; - case PRISM2_DOWNLOAD_NON_VOLATILE: -#ifdef PRISM2_NON_VOLATILE_DOWNLOAD - ret = prism2_download_nonvolatile(local, dl); -#else /* PRISM2_NON_VOLATILE_DOWNLOAD */ - printk(KERN_INFO "%s: non-volatile downloading not enabled\n", - local->dev->name); - ret = -EOPNOTSUPP; -#endif /* PRISM2_NON_VOLATILE_DOWNLOAD */ - break; - default: - printk(KERN_DEBUG "%s: unsupported download command %d\n", - local->dev->name, param->dl_cmd); - ret = -EINVAL; - break; - } - - out: - if (ret == 0 && dl && - param->dl_cmd == PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT) { - prism2_download_free_data(local->dl_pri); - local->dl_pri = dl; - } else if (ret == 0 && dl && - param->dl_cmd == PRISM2_DOWNLOAD_VOLATILE_PERSISTENT) { - prism2_download_free_data(local->dl_sec); - local->dl_sec = dl; - } else - prism2_download_free_data(dl); - - return ret; -} diff --git a/drivers/net/wireless/intersil/hostap/hostap_hw.c b/drivers/net/wireless/intersil/hostap/hostap_hw.c deleted file mode 100644 index b74f4cb5d6..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_hw.c +++ /dev/null @@ -1,3387 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Host AP (software wireless LAN access point) driver for - * Intersil Prism2/2.5/3. - * - * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen - * <j@w1.fi> - * Copyright (c) 2002-2005, Jouni Malinen <j@w1.fi> - * - * FIX: - * - there is currently no way of associating TX packets to correct wds device - * when TX Exc/OK event occurs, so all tx_packets and some - * tx_errors/tx_dropped are added to the main netdevice; using sw_support - * field in txdesc might be used to fix this (using Alloc event to increment - * tx_packets would need some further info in txfid table) - * - * Buffer Access Path (BAP) usage: - * Prism2 cards have two separate BAPs for accessing the card memory. These - * should allow concurrent access to two different frames and the driver - * previously used BAP0 for sending data and BAP1 for receiving data. - * However, there seems to be number of issues with concurrent access and at - * least one know hardware bug in using BAP0 and BAP1 concurrently with PCI - * Prism2.5. Therefore, the driver now only uses BAP0 for moving data between - * host and card memories. BAP0 accesses are protected with local->baplock - * (spin_lock_bh) to prevent concurrent use. - */ - - - -#include <asm/delay.h> -#include <linux/uaccess.h> - -#include <linux/slab.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/if_arp.h> -#include <linux/delay.h> -#include <linux/random.h> -#include <linux/wait.h> -#include <linux/sched/signal.h> -#include <linux/rtnetlink.h> -#include <linux/wireless.h> -#include <net/iw_handler.h> -#include <net/lib80211.h> -#include <asm/irq.h> - -#include "hostap_80211.h" -#include "hostap.h" -#include "hostap_ap.h" - - -/* #define final_version */ - -static int mtu = 1500; -module_param(mtu, int, 0444); -MODULE_PARM_DESC(mtu, "Maximum transfer unit"); - -static int channel[MAX_PARM_DEVICES] = { 3, DEF_INTS }; -module_param_array(channel, int, NULL, 0444); -MODULE_PARM_DESC(channel, "Initial channel"); - -static char essid[33] = "test"; -module_param_string(essid, essid, sizeof(essid), 0444); -MODULE_PARM_DESC(essid, "Host AP's ESSID"); - -static int iw_mode[MAX_PARM_DEVICES] = { IW_MODE_MASTER, DEF_INTS }; -module_param_array(iw_mode, int, NULL, 0444); -MODULE_PARM_DESC(iw_mode, "Initial operation mode"); - -static int beacon_int[MAX_PARM_DEVICES] = { 100, DEF_INTS }; -module_param_array(beacon_int, int, NULL, 0444); -MODULE_PARM_DESC(beacon_int, "Beacon interval (1 = 1024 usec)"); - -static int dtim_period[MAX_PARM_DEVICES] = { 1, DEF_INTS }; -module_param_array(dtim_period, int, NULL, 0444); -MODULE_PARM_DESC(dtim_period, "DTIM period"); - -static char dev_template[16] = "wlan%d"; -module_param_string(dev_template, dev_template, sizeof(dev_template), 0444); -MODULE_PARM_DESC(dev_template, "Prefix for network device name (default: " - "wlan%d)"); - -#ifdef final_version -#define EXTRA_EVENTS_WTERR 0 -#else -/* check WTERR events (Wait Time-out) in development versions */ -#define EXTRA_EVENTS_WTERR HFA384X_EV_WTERR -#endif - -/* Events that will be using BAP0 */ -#define HFA384X_BAP0_EVENTS \ - (HFA384X_EV_TXEXC | HFA384X_EV_RX | HFA384X_EV_INFO | HFA384X_EV_TX) - -/* event mask, i.e., events that will result in an interrupt */ -#define HFA384X_EVENT_MASK \ - (HFA384X_BAP0_EVENTS | HFA384X_EV_ALLOC | HFA384X_EV_INFDROP | \ - HFA384X_EV_CMD | HFA384X_EV_TICK | \ - EXTRA_EVENTS_WTERR) - -/* Default TX control flags: use 802.11 headers and request interrupt for - * failed transmits. Frames that request ACK callback, will add - * _TX_OK flag and _ALT_RTRY flag may be used to select different retry policy. - */ -#define HFA384X_TX_CTRL_FLAGS \ - (HFA384X_TX_CTRL_802_11 | HFA384X_TX_CTRL_TX_EX) - - -/* ca. 1 usec */ -#define HFA384X_CMD_BUSY_TIMEOUT 5000 -#define HFA384X_BAP_BUSY_TIMEOUT 50000 - -/* ca. 10 usec */ -#define HFA384X_CMD_COMPL_TIMEOUT 20000 -#define HFA384X_DL_COMPL_TIMEOUT 1000000 - -/* Wait times for initialization; yield to other processes to avoid busy - * waiting for long time. */ -#define HFA384X_INIT_TIMEOUT (HZ / 2) /* 500 ms */ -#define HFA384X_ALLOC_COMPL_TIMEOUT (HZ / 20) /* 50 ms */ - - -static void prism2_hw_reset(struct net_device *dev); -static void prism2_check_sta_fw_version(local_info_t *local); - -#ifdef PRISM2_DOWNLOAD_SUPPORT -/* hostap_download.c */ -static const struct proc_ops prism2_download_aux_dump_proc_ops; -static u8 * prism2_read_pda(struct net_device *dev); -static int prism2_download(local_info_t *local, - struct prism2_download_param *param); -static void prism2_download_free_data(struct prism2_download_data *dl); -static int prism2_download_volatile(local_info_t *local, - struct prism2_download_data *param); -static int prism2_download_genesis(local_info_t *local, - struct prism2_download_data *param); -static int prism2_get_ram_size(local_info_t *local); -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - - - - -#ifndef final_version -/* magic value written to SWSUPPORT0 reg. for detecting whether card is still - * present */ -#define HFA384X_MAGIC 0x8A32 -#endif - -static void hfa384x_read_regs(struct net_device *dev, - struct hfa384x_regs *regs) -{ - regs->cmd = HFA384X_INW(HFA384X_CMD_OFF); - regs->evstat = HFA384X_INW(HFA384X_EVSTAT_OFF); - regs->offset0 = HFA384X_INW(HFA384X_OFFSET0_OFF); - regs->offset1 = HFA384X_INW(HFA384X_OFFSET1_OFF); - regs->swsupport0 = HFA384X_INW(HFA384X_SWSUPPORT0_OFF); -} - - -/** - * __hostap_cmd_queue_free - Free Prism2 command queue entry (private) - * @local: pointer to private Host AP driver data - * @entry: Prism2 command queue entry to be freed - * @del_req: request the entry to be removed - * - * Internal helper function for freeing Prism2 command queue entries. - * Caller must have acquired local->cmdlock before calling this function. - */ -static inline void __hostap_cmd_queue_free(local_info_t *local, - struct hostap_cmd_queue *entry, - int del_req) -{ - if (del_req) { - entry->del_req = 1; - if (!list_empty(&entry->list)) { - list_del_init(&entry->list); - local->cmd_queue_len--; - } - } - - if (refcount_dec_and_test(&entry->usecnt) && entry->del_req) - kfree(entry); -} - - -/** - * hostap_cmd_queue_free - Free Prism2 command queue entry - * @local: pointer to private Host AP driver data - * @entry: Prism2 command queue entry to be freed - * @del_req: request the entry to be removed - * - * Free a Prism2 command queue entry. - */ -static inline void hostap_cmd_queue_free(local_info_t *local, - struct hostap_cmd_queue *entry, - int del_req) -{ - unsigned long flags; - - spin_lock_irqsave(&local->cmdlock, flags); - __hostap_cmd_queue_free(local, entry, del_req); - spin_unlock_irqrestore(&local->cmdlock, flags); -} - - -/** - * prism2_clear_cmd_queue - Free all pending Prism2 command queue entries - * @local: pointer to private Host AP driver data - */ -static void prism2_clear_cmd_queue(local_info_t *local) -{ - struct list_head *ptr, *n; - unsigned long flags; - struct hostap_cmd_queue *entry; - - spin_lock_irqsave(&local->cmdlock, flags); - list_for_each_safe(ptr, n, &local->cmd_queue) { - entry = list_entry(ptr, struct hostap_cmd_queue, list); - refcount_inc(&entry->usecnt); - printk(KERN_DEBUG "%s: removed pending cmd_queue entry " - "(type=%d, cmd=0x%04x, param0=0x%04x)\n", - local->dev->name, entry->type, entry->cmd, - entry->param0); - __hostap_cmd_queue_free(local, entry, 1); - } - if (local->cmd_queue_len) { - /* This should not happen; print debug message and clear - * queue length. */ - printk(KERN_DEBUG "%s: cmd_queue_len (%d) not zero after " - "flush\n", local->dev->name, local->cmd_queue_len); - local->cmd_queue_len = 0; - } - spin_unlock_irqrestore(&local->cmdlock, flags); -} - - -/** - * hfa384x_cmd_issue - Issue a Prism2 command to the hardware - * @dev: pointer to net_device - * @entry: Prism2 command queue entry to be issued - */ -static int hfa384x_cmd_issue(struct net_device *dev, - struct hostap_cmd_queue *entry) -{ - struct hostap_interface *iface; - local_info_t *local; - int tries; - u16 reg; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->card_present && !local->func->card_present(local)) - return -ENODEV; - - if (entry->issued) { - printk(KERN_DEBUG "%s: driver bug - re-issuing command @%p\n", - dev->name, entry); - } - - /* wait until busy bit is clear; this should always be clear since the - * commands are serialized */ - tries = HFA384X_CMD_BUSY_TIMEOUT; - while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { - tries--; - udelay(1); - } -#ifndef final_version - if (tries != HFA384X_CMD_BUSY_TIMEOUT) { - prism2_io_debug_error(dev, 1); - printk(KERN_DEBUG "%s: hfa384x_cmd_issue: cmd reg was busy " - "for %d usec\n", dev->name, - HFA384X_CMD_BUSY_TIMEOUT - tries); - } -#endif - if (tries == 0) { - reg = HFA384X_INW(HFA384X_CMD_OFF); - prism2_io_debug_error(dev, 2); - printk(KERN_DEBUG "%s: hfa384x_cmd_issue - timeout - " - "reg=0x%04x\n", dev->name, reg); - return -ETIMEDOUT; - } - - /* write command */ - spin_lock_irqsave(&local->cmdlock, flags); - HFA384X_OUTW(entry->param0, HFA384X_PARAM0_OFF); - HFA384X_OUTW(entry->param1, HFA384X_PARAM1_OFF); - HFA384X_OUTW(entry->cmd, HFA384X_CMD_OFF); - entry->issued = 1; - spin_unlock_irqrestore(&local->cmdlock, flags); - - return 0; -} - - -/** - * hfa384x_cmd - Issue a Prism2 command and wait (sleep) for completion - * @dev: pointer to net_device - * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) - * @param0: value for Param0 register - * @param1: value for Param1 register (pointer; %NULL if not used) - * @resp0: pointer for Resp0 data or %NULL if Resp0 is not needed - * - * Issue given command (possibly after waiting in command queue) and sleep - * until the command is completed (or timed out or interrupted). This can be - * called only from user process context. - */ -static int hfa384x_cmd(struct net_device *dev, u16 cmd, u16 param0, - u16 *param1, u16 *resp0) -{ - struct hostap_interface *iface; - local_info_t *local; - int err, res, issue, issued = 0; - unsigned long flags; - struct hostap_cmd_queue *entry; - DECLARE_WAITQUEUE(wait, current); - - iface = netdev_priv(dev); - local = iface->local; - - if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN) { - printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", - dev->name); - return -1; - } - - if (signal_pending(current)) - return -EINTR; - - entry = kzalloc(sizeof(*entry), GFP_ATOMIC); - if (entry == NULL) - return -ENOMEM; - - refcount_set(&entry->usecnt, 1); - entry->type = CMD_SLEEP; - entry->cmd = cmd; - entry->param0 = param0; - if (param1) - entry->param1 = *param1; - init_waitqueue_head(&entry->compl); - - /* prepare to wait for command completion event, but do not sleep yet - */ - add_wait_queue(&entry->compl, &wait); - set_current_state(TASK_INTERRUPTIBLE); - - spin_lock_irqsave(&local->cmdlock, flags); - issue = list_empty(&local->cmd_queue); - if (issue) - entry->issuing = 1; - list_add_tail(&entry->list, &local->cmd_queue); - local->cmd_queue_len++; - spin_unlock_irqrestore(&local->cmdlock, flags); - - err = 0; - if (!issue) - goto wait_completion; - - if (signal_pending(current)) - err = -EINTR; - - if (!err) { - if (hfa384x_cmd_issue(dev, entry)) - err = -ETIMEDOUT; - else - issued = 1; - } - - wait_completion: - if (!err && entry->type != CMD_COMPLETED) { - /* sleep until command is completed or timed out */ - res = schedule_timeout(2 * HZ); - } else - res = -1; - - if (!err && signal_pending(current)) - err = -EINTR; - - if (err && issued) { - /* the command was issued, so a CmdCompl event should occur - * soon; however, there's a pending signal and - * schedule_timeout() would be interrupted; wait a short period - * of time to avoid removing entry from the list before - * CmdCompl event */ - udelay(300); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&entry->compl, &wait); - - /* If entry->list is still in the list, it must be removed - * first and in this case prism2_cmd_ev() does not yet have - * local reference to it, and the data can be kfree()'d - * here. If the command completion event is still generated, - * it will be assigned to next (possibly) pending command, but - * the driver will reset the card anyway due to timeout - * - * If the entry is not in the list prism2_cmd_ev() has a local - * reference to it, but keeps cmdlock as long as the data is - * needed, so the data can be kfree()'d here. */ - - /* FIX: if the entry->list is in the list, it has not been completed - * yet, so removing it here is somewhat wrong.. this could cause - * references to freed memory and next list_del() causing NULL pointer - * dereference.. it would probably be better to leave the entry in the - * list and the list should be emptied during hw reset */ - - spin_lock_irqsave(&local->cmdlock, flags); - if (!list_empty(&entry->list)) { - printk(KERN_DEBUG "%s: hfa384x_cmd: entry still in list? " - "(entry=%p, type=%d, res=%d)\n", dev->name, entry, - entry->type, res); - list_del_init(&entry->list); - local->cmd_queue_len--; - } - spin_unlock_irqrestore(&local->cmdlock, flags); - - if (err) { - printk(KERN_DEBUG "%s: hfa384x_cmd: interrupted; err=%d\n", - dev->name, err); - res = err; - goto done; - } - - if (entry->type != CMD_COMPLETED) { - u16 reg = HFA384X_INW(HFA384X_EVSTAT_OFF); - printk(KERN_DEBUG "%s: hfa384x_cmd: command was not " - "completed (res=%d, entry=%p, type=%d, cmd=0x%04x, " - "param0=0x%04x, EVSTAT=%04x INTEN=%04x)\n", dev->name, - res, entry, entry->type, entry->cmd, entry->param0, reg, - HFA384X_INW(HFA384X_INTEN_OFF)); - if (reg & HFA384X_EV_CMD) { - /* Command completion event is pending, but the - * interrupt was not delivered - probably an issue - * with pcmcia-cs configuration. */ - printk(KERN_WARNING "%s: interrupt delivery does not " - "seem to work\n", dev->name); - } - prism2_io_debug_error(dev, 3); - res = -ETIMEDOUT; - goto done; - } - - if (resp0 != NULL) - *resp0 = entry->resp0; -#ifndef final_version - if (entry->res) { - printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x, " - "resp0=0x%04x\n", - dev->name, cmd, entry->res, entry->resp0); - } -#endif /* final_version */ - - res = entry->res; - done: - hostap_cmd_queue_free(local, entry, 1); - return res; -} - - -/** - * hfa384x_cmd_callback - Issue a Prism2 command; callback when completed - * @dev: pointer to net_device - * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) - * @param0: value for Param0 register - * @callback: command completion callback function (%NULL = no callback) - * @context: context data to be given to the callback function - * - * Issue given command (possibly after waiting in command queue) and use - * callback function to indicate command completion. This can be called both - * from user and interrupt context. The callback function will be called in - * hardware IRQ context. It can be %NULL, when no function is called when - * command is completed. - */ -static int hfa384x_cmd_callback(struct net_device *dev, u16 cmd, u16 param0, - void (*callback)(struct net_device *dev, - long context, u16 resp0, - u16 status), - long context) -{ - struct hostap_interface *iface; - local_info_t *local; - int issue, ret; - unsigned long flags; - struct hostap_cmd_queue *entry; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN + 2) { - printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", - dev->name); - return -1; - } - - entry = kzalloc(sizeof(*entry), GFP_ATOMIC); - if (entry == NULL) - return -ENOMEM; - - refcount_set(&entry->usecnt, 1); - entry->type = CMD_CALLBACK; - entry->cmd = cmd; - entry->param0 = param0; - entry->callback = callback; - entry->context = context; - - spin_lock_irqsave(&local->cmdlock, flags); - issue = list_empty(&local->cmd_queue); - if (issue) - entry->issuing = 1; - list_add_tail(&entry->list, &local->cmd_queue); - local->cmd_queue_len++; - spin_unlock_irqrestore(&local->cmdlock, flags); - - if (issue && hfa384x_cmd_issue(dev, entry)) - ret = -ETIMEDOUT; - else - ret = 0; - - hostap_cmd_queue_free(local, entry, ret); - - return ret; -} - - -/** - * __hfa384x_cmd_no_wait - Issue a Prism2 command (private) - * @dev: pointer to net_device - * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) - * @param0: value for Param0 register - * @io_debug_num: I/O debug error number - * - * Shared helper function for hfa384x_cmd_wait() and hfa384x_cmd_no_wait(). - */ -static int __hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd, u16 param0, - int io_debug_num) -{ - int tries; - u16 reg; - - /* wait until busy bit is clear; this should always be clear since the - * commands are serialized */ - tries = HFA384X_CMD_BUSY_TIMEOUT; - while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { - tries--; - udelay(1); - } - if (tries == 0) { - reg = HFA384X_INW(HFA384X_CMD_OFF); - prism2_io_debug_error(dev, io_debug_num); - printk(KERN_DEBUG "%s: __hfa384x_cmd_no_wait(%d) - timeout - " - "reg=0x%04x\n", dev->name, io_debug_num, reg); - return -ETIMEDOUT; - } - - /* write command */ - HFA384X_OUTW(param0, HFA384X_PARAM0_OFF); - HFA384X_OUTW(cmd, HFA384X_CMD_OFF); - - return 0; -} - - -/** - * hfa384x_cmd_wait - Issue a Prism2 command and busy wait for completion - * @dev: pointer to net_device - * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) - * @param0: value for Param0 register - */ -static int hfa384x_cmd_wait(struct net_device *dev, u16 cmd, u16 param0) -{ - int res, tries; - u16 reg; - - res = __hfa384x_cmd_no_wait(dev, cmd, param0, 4); - if (res) - return res; - - /* wait for command completion */ - if ((cmd & HFA384X_CMDCODE_MASK) == HFA384X_CMDCODE_DOWNLOAD) - tries = HFA384X_DL_COMPL_TIMEOUT; - else - tries = HFA384X_CMD_COMPL_TIMEOUT; - - while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) && - tries > 0) { - tries--; - udelay(10); - } - if (tries == 0) { - reg = HFA384X_INW(HFA384X_EVSTAT_OFF); - prism2_io_debug_error(dev, 5); - printk(KERN_DEBUG "%s: hfa384x_cmd_wait - timeout2 - " - "reg=0x%04x\n", dev->name, reg); - return -ETIMEDOUT; - } - - res = (HFA384X_INW(HFA384X_STATUS_OFF) & - (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | BIT(9) | - BIT(8))) >> 8; -#ifndef final_version - if (res) { - printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x\n", - dev->name, cmd, res); - } -#endif - - HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); - - return res; -} - - -/** - * hfa384x_cmd_no_wait - Issue a Prism2 command; do not wait for completion - * @dev: pointer to net_device - * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) - * @param0: value for Param0 register - */ -static inline int hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd, - u16 param0) -{ - return __hfa384x_cmd_no_wait(dev, cmd, param0, 6); -} - - -/** - * prism2_cmd_ev - Prism2 command completion event handler - * @dev: pointer to net_device - * - * Interrupt handler for command completion events. Called by the main - * interrupt handler in hardware IRQ context. Read Resp0 and status registers - * from the hardware and ACK the event. Depending on the issued command type - * either wake up the sleeping process that is waiting for command completion - * or call the callback function. Issue the next command, if one is pending. - */ -static void prism2_cmd_ev(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - struct hostap_cmd_queue *entry = NULL; - - iface = netdev_priv(dev); - local = iface->local; - - spin_lock(&local->cmdlock); - if (!list_empty(&local->cmd_queue)) { - entry = list_entry(local->cmd_queue.next, - struct hostap_cmd_queue, list); - refcount_inc(&entry->usecnt); - list_del_init(&entry->list); - local->cmd_queue_len--; - - if (!entry->issued) { - printk(KERN_DEBUG "%s: Command completion event, but " - "cmd not issued\n", dev->name); - __hostap_cmd_queue_free(local, entry, 1); - entry = NULL; - } - } - spin_unlock(&local->cmdlock); - - if (!entry) { - HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); - printk(KERN_DEBUG "%s: Command completion event, but no " - "pending commands\n", dev->name); - return; - } - - entry->resp0 = HFA384X_INW(HFA384X_RESP0_OFF); - entry->res = (HFA384X_INW(HFA384X_STATUS_OFF) & - (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | - BIT(9) | BIT(8))) >> 8; - HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); - - /* TODO: rest of the CmdEv handling could be moved to tasklet */ - if (entry->type == CMD_SLEEP) { - entry->type = CMD_COMPLETED; - wake_up_interruptible(&entry->compl); - } else if (entry->type == CMD_CALLBACK) { - if (entry->callback) - entry->callback(dev, entry->context, entry->resp0, - entry->res); - } else { - printk(KERN_DEBUG "%s: Invalid command completion type %d\n", - dev->name, entry->type); - } - hostap_cmd_queue_free(local, entry, 1); - - /* issue next command, if pending */ - entry = NULL; - spin_lock(&local->cmdlock); - if (!list_empty(&local->cmd_queue)) { - entry = list_entry(local->cmd_queue.next, - struct hostap_cmd_queue, list); - if (entry->issuing) { - /* hfa384x_cmd() has already started issuing this - * command, so do not start here */ - entry = NULL; - } - if (entry) - refcount_inc(&entry->usecnt); - } - spin_unlock(&local->cmdlock); - - if (entry) { - /* issue next command; if command issuing fails, remove the - * entry from cmd_queue */ - int res = hfa384x_cmd_issue(dev, entry); - spin_lock(&local->cmdlock); - __hostap_cmd_queue_free(local, entry, res); - spin_unlock(&local->cmdlock); - } -} - - -static int hfa384x_wait_offset(struct net_device *dev, u16 o_off) -{ - int tries = HFA384X_BAP_BUSY_TIMEOUT; - int res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY; - - while (res && tries > 0) { - tries--; - udelay(1); - res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY; - } - return res; -} - - -/* Offset must be even */ -static int hfa384x_setup_bap(struct net_device *dev, u16 bap, u16 id, - int offset) -{ - u16 o_off, s_off; - int ret = 0; - - if (offset % 2 || bap > 1) - return -EINVAL; - - if (bap == BAP1) { - o_off = HFA384X_OFFSET1_OFF; - s_off = HFA384X_SELECT1_OFF; - } else { - o_off = HFA384X_OFFSET0_OFF; - s_off = HFA384X_SELECT0_OFF; - } - - if (hfa384x_wait_offset(dev, o_off)) { - prism2_io_debug_error(dev, 7); - printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout before\n", - dev->name); - ret = -ETIMEDOUT; - goto out; - } - - HFA384X_OUTW(id, s_off); - HFA384X_OUTW(offset, o_off); - - if (hfa384x_wait_offset(dev, o_off)) { - prism2_io_debug_error(dev, 8); - printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout after\n", - dev->name); - ret = -ETIMEDOUT; - goto out; - } -#ifndef final_version - if (HFA384X_INW(o_off) & HFA384X_OFFSET_ERR) { - prism2_io_debug_error(dev, 9); - printk(KERN_DEBUG "%s: hfa384x_setup_bap - offset error " - "(%d,0x04%x,%d); reg=0x%04x\n", - dev->name, bap, id, offset, HFA384X_INW(o_off)); - ret = -EINVAL; - } -#endif - - out: - return ret; -} - - -static int hfa384x_get_rid(struct net_device *dev, u16 rid, void *buf, int len, - int exact_len) -{ - struct hostap_interface *iface; - local_info_t *local; - int res, rlen = 0; - struct hfa384x_rid_hdr rec; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->no_pri) { - printk(KERN_DEBUG "%s: cannot get RID %04x (len=%d) - no PRI " - "f/w\n", dev->name, rid, len); - return -ENOTTY; /* Well.. not really correct, but return - * something unique enough.. */ - } - - if ((local->func->card_present && !local->func->card_present(local)) || - local->hw_downloading) - return -ENODEV; - - res = mutex_lock_interruptible(&local->rid_bap_mtx); - if (res) - return res; - - res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS, rid, NULL, NULL); - if (res) { - printk(KERN_DEBUG "%s: hfa384x_get_rid: CMDCODE_ACCESS failed " - "(res=%d, rid=%04x, len=%d)\n", - dev->name, res, rid, len); - mutex_unlock(&local->rid_bap_mtx); - return res; - } - - spin_lock_bh(&local->baplock); - - res = hfa384x_setup_bap(dev, BAP0, rid, 0); - if (res) - goto unlock; - - res = hfa384x_from_bap(dev, BAP0, &rec, sizeof(rec)); - if (res) - goto unlock; - - if (le16_to_cpu(rec.len) == 0) { - /* RID not available */ - res = -ENODATA; - goto unlock; - } - - rlen = (le16_to_cpu(rec.len) - 1) * 2; - if (exact_len && rlen != len) { - printk(KERN_DEBUG "%s: hfa384x_get_rid - RID len mismatch: " - "rid=0x%04x, len=%d (expected %d)\n", - dev->name, rid, rlen, len); - res = -ENODATA; - } - - res = hfa384x_from_bap(dev, BAP0, buf, len); - -unlock: - spin_unlock_bh(&local->baplock); - mutex_unlock(&local->rid_bap_mtx); - - if (res) { - if (res != -ENODATA) - printk(KERN_DEBUG "%s: hfa384x_get_rid (rid=%04x, " - "len=%d) - failed - res=%d\n", dev->name, rid, - len, res); - if (res == -ETIMEDOUT) - prism2_hw_reset(dev); - return res; - } - - return rlen; -} - - -static int hfa384x_set_rid(struct net_device *dev, u16 rid, void *buf, int len) -{ - struct hostap_interface *iface; - local_info_t *local; - struct hfa384x_rid_hdr rec; - int res; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->no_pri) { - printk(KERN_DEBUG "%s: cannot set RID %04x (len=%d) - no PRI " - "f/w\n", dev->name, rid, len); - return -ENOTTY; /* Well.. not really correct, but return - * something unique enough.. */ - } - - if ((local->func->card_present && !local->func->card_present(local)) || - local->hw_downloading) - return -ENODEV; - - rec.rid = cpu_to_le16(rid); - /* RID len in words and +1 for rec.rid */ - rec.len = cpu_to_le16(len / 2 + len % 2 + 1); - - res = mutex_lock_interruptible(&local->rid_bap_mtx); - if (res) - return res; - - spin_lock_bh(&local->baplock); - res = hfa384x_setup_bap(dev, BAP0, rid, 0); - if (!res) - res = hfa384x_to_bap(dev, BAP0, &rec, sizeof(rec)); - if (!res) - res = hfa384x_to_bap(dev, BAP0, buf, len); - spin_unlock_bh(&local->baplock); - - if (res) { - printk(KERN_DEBUG "%s: hfa384x_set_rid (rid=%04x, len=%d) - " - "failed - res=%d\n", dev->name, rid, len, res); - mutex_unlock(&local->rid_bap_mtx); - return res; - } - - res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS_WRITE, rid, NULL, NULL); - mutex_unlock(&local->rid_bap_mtx); - - if (res) { - printk(KERN_DEBUG "%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE " - "failed (res=%d, rid=%04x, len=%d)\n", - dev->name, res, rid, len); - - if (res == -ETIMEDOUT) - prism2_hw_reset(dev); - } - - return res; -} - - -static void hfa384x_disable_interrupts(struct net_device *dev) -{ - /* disable interrupts and clear event status */ - HFA384X_OUTW(0, HFA384X_INTEN_OFF); - HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); -} - - -static void hfa384x_enable_interrupts(struct net_device *dev) -{ - /* ack pending events and enable interrupts from selected events */ - HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); - HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF); -} - - -static void hfa384x_events_no_bap0(struct net_device *dev) -{ - HFA384X_OUTW(HFA384X_EVENT_MASK & ~HFA384X_BAP0_EVENTS, - HFA384X_INTEN_OFF); -} - - -static void hfa384x_events_all(struct net_device *dev) -{ - HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF); -} - - -static void hfa384x_events_only_cmd(struct net_device *dev) -{ - HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_INTEN_OFF); -} - - -static u16 hfa384x_allocate_fid(struct net_device *dev, int len) -{ - u16 fid; - unsigned long delay; - - /* FIX: this could be replace with hfa384x_cmd() if the Alloc event - * below would be handled like CmdCompl event (sleep here, wake up from - * interrupt handler */ - if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_ALLOC, len)) { - printk(KERN_DEBUG "%s: cannot allocate fid, len=%d\n", - dev->name, len); - return 0xffff; - } - - delay = jiffies + HFA384X_ALLOC_COMPL_TIMEOUT; - while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC) && - time_before(jiffies, delay)) - yield(); - if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC)) { - printk("%s: fid allocate, len=%d - timeout\n", dev->name, len); - return 0xffff; - } - - fid = HFA384X_INW(HFA384X_ALLOCFID_OFF); - HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF); - - return fid; -} - - -static int prism2_reset_port(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - int res; - - iface = netdev_priv(dev); - local = iface->local; - - if (!local->dev_enabled) - return 0; - - res = hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0, - NULL, NULL); - if (res) - printk(KERN_DEBUG "%s: reset port failed to disable port\n", - dev->name); - else { - res = hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0, - NULL, NULL); - if (res) - printk(KERN_DEBUG "%s: reset port failed to enable " - "port\n", dev->name); - } - - /* It looks like at least some STA firmware versions reset - * fragmentation threshold back to 2346 after enable command. Restore - * the configured value, if it differs from this default. */ - if (local->fragm_threshold != 2346 && - hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, - local->fragm_threshold)) { - printk(KERN_DEBUG "%s: failed to restore fragmentation " - "threshold (%d) after Port0 enable\n", - dev->name, local->fragm_threshold); - } - - /* Some firmwares lose antenna selection settings on reset */ - (void) hostap_set_antsel(local); - - return res; -} - - -static int prism2_get_version_info(struct net_device *dev, u16 rid, - const char *txt) -{ - struct hfa384x_comp_ident comp; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->no_pri) { - /* PRI f/w not yet available - cannot read RIDs */ - return -1; - } - if (hfa384x_get_rid(dev, rid, &comp, sizeof(comp), 1) < 0) { - printk(KERN_DEBUG "Could not get RID for component %s\n", txt); - return -1; - } - - printk(KERN_INFO "%s: %s: id=0x%02x v%d.%d.%d\n", dev->name, txt, - __le16_to_cpu(comp.id), __le16_to_cpu(comp.major), - __le16_to_cpu(comp.minor), __le16_to_cpu(comp.variant)); - return 0; -} - - -static int prism2_setup_rids(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - __le16 tmp; - int ret = 0; - - iface = netdev_priv(dev); - local = iface->local; - - hostap_set_word(dev, HFA384X_RID_TICKTIME, 2000); - - if (!local->fw_ap) { - u16 tmp1 = hostap_get_porttype(local); - ret = hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, tmp1); - if (ret) { - printk("%s: Port type setting to %d failed\n", - dev->name, tmp1); - goto fail; - } - } - - /* Setting SSID to empty string seems to kill the card in Host AP mode - */ - if (local->iw_mode != IW_MODE_MASTER || local->essid[0] != '\0') { - ret = hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, - local->essid); - if (ret) { - printk("%s: AP own SSID setting failed\n", dev->name); - goto fail; - } - } - - ret = hostap_set_word(dev, HFA384X_RID_CNFMAXDATALEN, - PRISM2_DATA_MAXLEN); - if (ret) { - printk("%s: MAC data length setting to %d failed\n", - dev->name, PRISM2_DATA_MAXLEN); - goto fail; - } - - if (hfa384x_get_rid(dev, HFA384X_RID_CHANNELLIST, &tmp, 2, 1) < 0) { - printk("%s: Channel list read failed\n", dev->name); - ret = -EINVAL; - goto fail; - } - local->channel_mask = le16_to_cpu(tmp); - - if (local->channel < 1 || local->channel > 14 || - !(local->channel_mask & (1 << (local->channel - 1)))) { - printk(KERN_WARNING "%s: Channel setting out of range " - "(%d)!\n", dev->name, local->channel); - ret = -EBUSY; - goto fail; - } - - ret = hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel); - if (ret) { - printk("%s: Channel setting to %d failed\n", - dev->name, local->channel); - goto fail; - } - - ret = hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, - local->beacon_int); - if (ret) { - printk("%s: Beacon interval setting to %d failed\n", - dev->name, local->beacon_int); - /* this may fail with Symbol/Lucent firmware */ - if (ret == -ETIMEDOUT) - goto fail; - } - - ret = hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, - local->dtim_period); - if (ret) { - printk("%s: DTIM period setting to %d failed\n", - dev->name, local->dtim_period); - /* this may fail with Symbol/Lucent firmware */ - if (ret == -ETIMEDOUT) - goto fail; - } - - ret = hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, - local->is_promisc); - if (ret) - printk(KERN_INFO "%s: Setting promiscuous mode (%d) failed\n", - dev->name, local->is_promisc); - - if (!local->fw_ap) { - ret = hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, - local->essid); - if (ret) { - printk("%s: Desired SSID setting failed\n", dev->name); - goto fail; - } - } - - /* Setup TXRateControl, defaults to allow use of 1, 2, 5.5, and - * 11 Mbps in automatic TX rate fallback and 1 and 2 Mbps as basic - * rates */ - if (local->tx_rate_control == 0) { - local->tx_rate_control = - HFA384X_RATES_1MBPS | - HFA384X_RATES_2MBPS | - HFA384X_RATES_5MBPS | - HFA384X_RATES_11MBPS; - } - if (local->basic_rates == 0) - local->basic_rates = HFA384X_RATES_1MBPS | HFA384X_RATES_2MBPS; - - if (!local->fw_ap) { - ret = hostap_set_word(dev, HFA384X_RID_TXRATECONTROL, - local->tx_rate_control); - if (ret) { - printk("%s: TXRateControl setting to %d failed\n", - dev->name, local->tx_rate_control); - goto fail; - } - - ret = hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES, - local->tx_rate_control); - if (ret) { - printk("%s: cnfSupportedRates setting to %d failed\n", - dev->name, local->tx_rate_control); - } - - ret = hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, - local->basic_rates); - if (ret) { - printk("%s: cnfBasicRates setting to %d failed\n", - dev->name, local->basic_rates); - } - - ret = hostap_set_word(dev, HFA384X_RID_CREATEIBSS, 1); - if (ret) { - printk("%s: Create IBSS setting to 1 failed\n", - dev->name); - } - } - - if (local->name_set) - (void) hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, - local->name); - - if (hostap_set_encryption(local)) { - printk(KERN_INFO "%s: could not configure encryption\n", - dev->name); - } - - (void) hostap_set_antsel(local); - - if (hostap_set_roaming(local)) { - printk(KERN_INFO "%s: could not set host roaming\n", - dev->name); - } - - if (local->sta_fw_ver >= PRISM2_FW_VER(1,6,3) && - hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, local->enh_sec)) - printk(KERN_INFO "%s: cnfEnhSecurity setting to 0x%x failed\n", - dev->name, local->enh_sec); - - /* 32-bit tallies were added in STA f/w 0.8.0, but they were apparently - * not working correctly (last seven counters report bogus values). - * This has been fixed in 0.8.2, so enable 32-bit tallies only - * beginning with that firmware version. Another bug fix for 32-bit - * tallies in 1.4.0; should 16-bit tallies be used for some other - * versions, too? */ - if (local->sta_fw_ver >= PRISM2_FW_VER(0,8,2)) { - if (hostap_set_word(dev, HFA384X_RID_CNFTHIRTY2TALLY, 1)) { - printk(KERN_INFO "%s: cnfThirty2Tally setting " - "failed\n", dev->name); - local->tallies32 = 0; - } else - local->tallies32 = 1; - } else - local->tallies32 = 0; - - hostap_set_auth_algs(local); - - if (hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, - local->fragm_threshold)) { - printk(KERN_INFO "%s: setting FragmentationThreshold to %d " - "failed\n", dev->name, local->fragm_threshold); - } - - if (hostap_set_word(dev, HFA384X_RID_RTSTHRESHOLD, - local->rts_threshold)) { - printk(KERN_INFO "%s: setting RTSThreshold to %d failed\n", - dev->name, local->rts_threshold); - } - - if (local->manual_retry_count >= 0 && - hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT, - local->manual_retry_count)) { - printk(KERN_INFO "%s: setting cnfAltRetryCount to %d failed\n", - dev->name, local->manual_retry_count); - } - - if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1) && - hfa384x_get_rid(dev, HFA384X_RID_CNFDBMADJUST, &tmp, 2, 1) == 2) { - local->rssi_to_dBm = le16_to_cpu(tmp); - } - - if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->wpa && - hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1)) { - printk(KERN_INFO "%s: setting ssnHandlingMode to 1 failed\n", - dev->name); - } - - if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->generic_elem && - hfa384x_set_rid(dev, HFA384X_RID_GENERICELEMENT, - local->generic_elem, local->generic_elem_len)) { - printk(KERN_INFO "%s: setting genericElement failed\n", - dev->name); - } - - fail: - return ret; -} - - -static int prism2_hw_init(struct net_device *dev, int initial) -{ - struct hostap_interface *iface; - local_info_t *local; - int ret, first = 1; - unsigned long start, delay; - - PDEBUG(DEBUG_FLOW, "prism2_hw_init()\n"); - - iface = netdev_priv(dev); - local = iface->local; - - clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits); - - init: - /* initialize HFA 384x */ - ret = hfa384x_cmd_no_wait(dev, HFA384X_CMDCODE_INIT, 0); - if (ret) { - printk(KERN_INFO "%s: first command failed - assuming card " - "does not have primary firmware\n", dev_info); - } - - if (first && (HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) { - /* EvStat has Cmd bit set in some cases, so retry once if no - * wait was needed */ - HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); - printk(KERN_DEBUG "%s: init command completed too quickly - " - "retrying\n", dev->name); - first = 0; - goto init; - } - - start = jiffies; - delay = jiffies + HFA384X_INIT_TIMEOUT; - while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) && - time_before(jiffies, delay)) - yield(); - if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) { - printk(KERN_DEBUG "%s: assuming no Primary image in " - "flash - card initialization not completed\n", - dev_info); - local->no_pri = 1; -#ifdef PRISM2_DOWNLOAD_SUPPORT - if (local->sram_type == -1) - local->sram_type = prism2_get_ram_size(local); -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - return 1; - } - local->no_pri = 0; - printk(KERN_DEBUG "prism2_hw_init: initialized in %lu ms\n", - (jiffies - start) * 1000 / HZ); - HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); - return 0; -} - - -static int prism2_hw_init2(struct net_device *dev, int initial) -{ - struct hostap_interface *iface; - local_info_t *local; - int i; - - iface = netdev_priv(dev); - local = iface->local; - -#ifdef PRISM2_DOWNLOAD_SUPPORT - kfree(local->pda); - if (local->no_pri) - local->pda = NULL; - else - local->pda = prism2_read_pda(dev); -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - - hfa384x_disable_interrupts(dev); - -#ifndef final_version - HFA384X_OUTW(HFA384X_MAGIC, HFA384X_SWSUPPORT0_OFF); - if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) { - printk("SWSUPPORT0 write/read failed: %04X != %04X\n", - HFA384X_INW(HFA384X_SWSUPPORT0_OFF), HFA384X_MAGIC); - goto failed; - } -#endif - - if (initial || local->pri_only) { - hfa384x_events_only_cmd(dev); - /* get card version information */ - if (prism2_get_version_info(dev, HFA384X_RID_NICID, "NIC") || - prism2_get_version_info(dev, HFA384X_RID_PRIID, "PRI")) { - hfa384x_disable_interrupts(dev); - goto failed; - } - - if (prism2_get_version_info(dev, HFA384X_RID_STAID, "STA")) { - printk(KERN_DEBUG "%s: Failed to read STA f/w version " - "- only Primary f/w present\n", dev->name); - local->pri_only = 1; - return 0; - } - local->pri_only = 0; - hfa384x_disable_interrupts(dev); - } - - /* FIX: could convert allocate_fid to use sleeping CmdCompl wait and - * enable interrupts before this. This would also require some sort of - * sleeping AllocEv waiting */ - - /* allocate TX FIDs */ - local->txfid_len = PRISM2_TXFID_LEN; - for (i = 0; i < PRISM2_TXFID_COUNT; i++) { - local->txfid[i] = hfa384x_allocate_fid(dev, local->txfid_len); - if (local->txfid[i] == 0xffff && local->txfid_len > 1600) { - local->txfid[i] = hfa384x_allocate_fid(dev, 1600); - if (local->txfid[i] != 0xffff) { - printk(KERN_DEBUG "%s: Using shorter TX FID " - "(1600 bytes)\n", dev->name); - local->txfid_len = 1600; - } - } - if (local->txfid[i] == 0xffff) - goto failed; - local->intransmitfid[i] = PRISM2_TXFID_EMPTY; - } - - hfa384x_events_only_cmd(dev); - - if (initial) { - u8 addr[ETH_ALEN] = {}; - struct list_head *ptr; - - prism2_check_sta_fw_version(local); - - if (hfa384x_get_rid(dev, HFA384X_RID_CNFOWNMACADDR, - addr, ETH_ALEN, 1) < 0) { - printk("%s: could not get own MAC address\n", - dev->name); - } - eth_hw_addr_set(dev, addr); - list_for_each(ptr, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - eth_hw_addr_inherit(iface->dev, dev); - } - } else if (local->fw_ap) - prism2_check_sta_fw_version(local); - - prism2_setup_rids(dev); - - /* MAC is now configured, but port 0 is not yet enabled */ - return 0; - - failed: - if (!local->no_pri) - printk(KERN_WARNING "%s: Initialization failed\n", dev_info); - return 1; -} - - -static int prism2_hw_enable(struct net_device *dev, int initial) -{ - struct hostap_interface *iface; - local_info_t *local; - int was_resetting; - - iface = netdev_priv(dev); - local = iface->local; - was_resetting = local->hw_resetting; - - if (hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0, NULL, NULL)) { - printk("%s: MAC port 0 enabling failed\n", dev->name); - return 1; - } - - local->hw_ready = 1; - local->hw_reset_tries = 0; - local->hw_resetting = 0; - hfa384x_enable_interrupts(dev); - - /* at least D-Link DWL-650 seems to require additional port reset - * before it starts acting as an AP, so reset port automatically - * here just in case */ - if (initial && prism2_reset_port(dev)) { - printk("%s: MAC port 0 resetting failed\n", dev->name); - return 1; - } - - if (was_resetting && netif_queue_stopped(dev)) { - /* If hw_reset() was called during pending transmit, netif - * queue was stopped. Wake it up now since the wlan card has - * been resetted. */ - netif_wake_queue(dev); - } - - return 0; -} - - -static int prism2_hw_config(struct net_device *dev, int initial) -{ - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->hw_downloading) - return 1; - - if (prism2_hw_init(dev, initial)) { - return local->no_pri ? 0 : 1; - } - - if (prism2_hw_init2(dev, initial)) - return 1; - - /* Enable firmware if secondary image is loaded and at least one of the - * netdevices is up. */ - if (!local->pri_only && - (initial == 0 || (initial == 2 && local->num_dev_open > 0))) { - if (!local->dev_enabled) - prism2_callback(local, PRISM2_CALLBACK_ENABLE); - local->dev_enabled = 1; - return prism2_hw_enable(dev, initial); - } - - return 0; -} - - -static void prism2_hw_shutdown(struct net_device *dev, int no_disable) -{ - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - /* Allow only command completion events during disable */ - hfa384x_events_only_cmd(dev); - - local->hw_ready = 0; - if (local->dev_enabled) - prism2_callback(local, PRISM2_CALLBACK_DISABLE); - local->dev_enabled = 0; - - if (local->func->card_present && !local->func->card_present(local)) { - printk(KERN_DEBUG "%s: card already removed or not configured " - "during shutdown\n", dev->name); - return; - } - - if ((no_disable & HOSTAP_HW_NO_DISABLE) == 0 && - hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0, NULL, NULL)) - printk(KERN_WARNING "%s: Shutdown failed\n", dev_info); - - hfa384x_disable_interrupts(dev); - - if (no_disable & HOSTAP_HW_ENABLE_CMDCOMPL) - hfa384x_events_only_cmd(dev); - else - prism2_clear_cmd_queue(local); -} - - -static void prism2_hw_reset(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - -#if 0 - static long last_reset = 0; - - /* do not reset card more than once per second to avoid ending up in a - * busy loop resetting the card */ - if (time_before_eq(jiffies, last_reset + HZ)) - return; - last_reset = jiffies; -#endif - - iface = netdev_priv(dev); - local = iface->local; - - if (local->hw_downloading) - return; - - if (local->hw_resetting) { - printk(KERN_WARNING "%s: %s: already resetting card - " - "ignoring reset request\n", dev_info, dev->name); - return; - } - - local->hw_reset_tries++; - if (local->hw_reset_tries > 10) { - printk(KERN_WARNING "%s: too many reset tries, skipping\n", - dev->name); - return; - } - - printk(KERN_WARNING "%s: %s: resetting card\n", dev_info, dev->name); - hfa384x_disable_interrupts(dev); - local->hw_resetting = 1; - if (local->func->cor_sreset) { - /* Host system seems to hang in some cases with high traffic - * load or shared interrupts during COR sreset. Disable shared - * interrupts during reset to avoid these crashes. COS sreset - * takes quite a long time, so it is unfortunate that this - * seems to be needed. Anyway, I do not know of any better way - * of avoiding the crash. */ - disable_irq(dev->irq); - local->func->cor_sreset(local); - enable_irq(dev->irq); - } - prism2_hw_shutdown(dev, 1); - prism2_hw_config(dev, 0); - local->hw_resetting = 0; - -#ifdef PRISM2_DOWNLOAD_SUPPORT - if (local->dl_pri) { - printk(KERN_DEBUG "%s: persistent download of primary " - "firmware\n", dev->name); - if (prism2_download_genesis(local, local->dl_pri) < 0) - printk(KERN_WARNING "%s: download (PRI) failed\n", - dev->name); - } - - if (local->dl_sec) { - printk(KERN_DEBUG "%s: persistent download of secondary " - "firmware\n", dev->name); - if (prism2_download_volatile(local, local->dl_sec) < 0) - printk(KERN_WARNING "%s: download (SEC) failed\n", - dev->name); - } -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - - /* TODO: restore beacon TIM bits for STAs that have buffered frames */ -} - - -static void prism2_schedule_reset(local_info_t *local) -{ - schedule_work(&local->reset_queue); -} - - -/* Called only as scheduled task after noticing card timeout in interrupt - * context */ -static void handle_reset_queue(struct work_struct *work) -{ - local_info_t *local = container_of(work, local_info_t, reset_queue); - - printk(KERN_DEBUG "%s: scheduled card reset\n", local->dev->name); - prism2_hw_reset(local->dev); - - if (netif_queue_stopped(local->dev)) { - int i; - - for (i = 0; i < PRISM2_TXFID_COUNT; i++) - if (local->intransmitfid[i] == PRISM2_TXFID_EMPTY) { - PDEBUG(DEBUG_EXTRA, "prism2_tx_timeout: " - "wake up queue\n"); - netif_wake_queue(local->dev); - break; - } - } -} - - -static int prism2_get_txfid_idx(local_info_t *local) -{ - int idx, end; - unsigned long flags; - - spin_lock_irqsave(&local->txfidlock, flags); - end = idx = local->next_txfid; - do { - if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) { - local->intransmitfid[idx] = PRISM2_TXFID_RESERVED; - spin_unlock_irqrestore(&local->txfidlock, flags); - return idx; - } - idx++; - if (idx >= PRISM2_TXFID_COUNT) - idx = 0; - } while (idx != end); - spin_unlock_irqrestore(&local->txfidlock, flags); - - PDEBUG(DEBUG_EXTRA2, "prism2_get_txfid_idx: no room in txfid buf: " - "packet dropped\n"); - local->dev->stats.tx_dropped++; - - return -1; -} - - -/* Called only from hardware IRQ */ -static void prism2_transmit_cb(struct net_device *dev, long context, - u16 resp0, u16 res) -{ - struct hostap_interface *iface; - local_info_t *local; - int idx = (int) context; - - iface = netdev_priv(dev); - local = iface->local; - - if (res) { - printk(KERN_DEBUG "%s: prism2_transmit_cb - res=0x%02x\n", - dev->name, res); - return; - } - - if (idx < 0 || idx >= PRISM2_TXFID_COUNT) { - printk(KERN_DEBUG "%s: prism2_transmit_cb called with invalid " - "idx=%d\n", dev->name, idx); - return; - } - - if (!test_and_clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { - printk(KERN_DEBUG "%s: driver bug: prism2_transmit_cb called " - "with no pending transmit\n", dev->name); - } - - if (netif_queue_stopped(dev)) { - /* ready for next TX, so wake up queue that was stopped in - * prism2_transmit() */ - netif_wake_queue(dev); - } - - spin_lock(&local->txfidlock); - - /* With reclaim, Resp0 contains new txfid for transmit; the old txfid - * will be automatically allocated for the next TX frame */ - local->intransmitfid[idx] = resp0; - - PDEBUG(DEBUG_FID, "%s: prism2_transmit_cb: txfid[%d]=0x%04x, " - "resp0=0x%04x, transmit_txfid=0x%04x\n", - dev->name, idx, local->txfid[idx], - resp0, local->intransmitfid[local->next_txfid]); - - idx++; - if (idx >= PRISM2_TXFID_COUNT) - idx = 0; - local->next_txfid = idx; - - /* check if all TX buffers are occupied */ - do { - if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) { - spin_unlock(&local->txfidlock); - return; - } - idx++; - if (idx >= PRISM2_TXFID_COUNT) - idx = 0; - } while (idx != local->next_txfid); - spin_unlock(&local->txfidlock); - - /* no empty TX buffers, stop queue */ - netif_stop_queue(dev); -} - - -/* Called only from software IRQ if PCI bus master is not used (with bus master - * this can be called both from software and hardware IRQ) */ -static int prism2_transmit(struct net_device *dev, int idx) -{ - struct hostap_interface *iface; - local_info_t *local; - int res; - - iface = netdev_priv(dev); - local = iface->local; - - /* The driver tries to stop netif queue so that there would not be - * more than one attempt to transmit frames going on; check that this - * is really the case */ - - if (test_and_set_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { - printk(KERN_DEBUG "%s: driver bug - prism2_transmit() called " - "when previous TX was pending\n", dev->name); - return -1; - } - - /* stop the queue for the time that transmit is pending */ - netif_stop_queue(dev); - - /* transmit packet */ - res = hfa384x_cmd_callback( - dev, - HFA384X_CMDCODE_TRANSMIT | HFA384X_CMD_TX_RECLAIM, - local->txfid[idx], - prism2_transmit_cb, (long) idx); - - if (res) { - printk(KERN_DEBUG "%s: prism2_transmit: CMDCODE_TRANSMIT " - "failed (res=%d)\n", dev->name, res); - dev->stats.tx_dropped++; - netif_wake_queue(dev); - return -1; - } - netif_trans_update(dev); - - /* Since we did not wait for command completion, the card continues - * to process on the background and we will finish handling when - * command completion event is handled (prism2_cmd_ev() function) */ - - return 0; -} - - -/* Send IEEE 802.11 frame (convert the header into Prism2 TX descriptor and - * send the payload with this descriptor) */ -/* Called only from software IRQ */ -static int prism2_tx_80211(struct sk_buff *skb, struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - struct hfa384x_tx_frame txdesc; - struct hostap_skb_tx_data *meta; - int hdr_len, data_len, idx, res, ret = -1; - u16 tx_control; - - iface = netdev_priv(dev); - local = iface->local; - - meta = (struct hostap_skb_tx_data *) skb->cb; - - prism2_callback(local, PRISM2_CALLBACK_TX_START); - - if ((local->func->card_present && !local->func->card_present(local)) || - !local->hw_ready || local->hw_downloading || local->pri_only) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: prism2_tx_80211: hw not ready -" - " skipping\n", dev->name); - } - goto fail; - } - - memset(&txdesc, 0, sizeof(txdesc)); - - /* skb->data starts with txdesc->frame_control */ - hdr_len = sizeof(txdesc.header); - BUILD_BUG_ON(hdr_len != 24); - skb_copy_from_linear_data(skb, &txdesc.header, hdr_len); - if (ieee80211_is_data(txdesc.frame_control) && - ieee80211_has_a4(txdesc.frame_control) && - skb->len >= 30) { - /* Addr4 */ - skb_copy_from_linear_data_offset(skb, hdr_len, txdesc.addr4, - ETH_ALEN); - hdr_len += ETH_ALEN; - } - - tx_control = local->tx_control; - if (meta->tx_cb_idx) { - tx_control |= HFA384X_TX_CTRL_TX_OK; - txdesc.sw_support = cpu_to_le32(meta->tx_cb_idx); - } - txdesc.tx_control = cpu_to_le16(tx_control); - txdesc.tx_rate = meta->rate; - - data_len = skb->len - hdr_len; - txdesc.data_len = cpu_to_le16(data_len); - txdesc.len = cpu_to_be16(data_len); - - idx = prism2_get_txfid_idx(local); - if (idx < 0) - goto fail; - - if (local->frame_dump & PRISM2_DUMP_TX_HDR) - hostap_dump_tx_header(dev->name, &txdesc); - - spin_lock(&local->baplock); - res = hfa384x_setup_bap(dev, BAP0, local->txfid[idx], 0); - - if (!res) - res = hfa384x_to_bap(dev, BAP0, &txdesc, sizeof(txdesc)); - if (!res) - res = hfa384x_to_bap(dev, BAP0, skb->data + hdr_len, - skb->len - hdr_len); - spin_unlock(&local->baplock); - - if (!res) - res = prism2_transmit(dev, idx); - if (res) { - printk(KERN_DEBUG "%s: prism2_tx_80211 - to BAP0 failed\n", - dev->name); - local->intransmitfid[idx] = PRISM2_TXFID_EMPTY; - schedule_work(&local->reset_queue); - goto fail; - } - - ret = 0; - -fail: - prism2_callback(local, PRISM2_CALLBACK_TX_END); - return ret; -} - - -/* Some SMP systems have reported number of odd errors with hostap_pci. fid - * register has changed values between consecutive reads for an unknown reason. - * This should really not happen, so more debugging is needed. This test - * version is a bit slower, but it will detect most of such register changes - * and will try to get the correct fid eventually. */ -#define EXTRA_FID_READ_TESTS - -static u16 prism2_read_fid_reg(struct net_device *dev, u16 reg) -{ -#ifdef EXTRA_FID_READ_TESTS - u16 val, val2, val3; - int i; - - for (i = 0; i < 10; i++) { - val = HFA384X_INW(reg); - val2 = HFA384X_INW(reg); - val3 = HFA384X_INW(reg); - - if (val == val2 && val == val3) - return val; - - printk(KERN_DEBUG "%s: detected fid change (try=%d, reg=%04x):" - " %04x %04x %04x\n", - dev->name, i, reg, val, val2, val3); - if ((val == val2 || val == val3) && val != 0) - return val; - if (val2 == val3 && val2 != 0) - return val2; - } - printk(KERN_WARNING "%s: Uhhuh.. could not read good fid from reg " - "%04x (%04x %04x %04x)\n", dev->name, reg, val, val2, val3); - return val; -#else /* EXTRA_FID_READ_TESTS */ - return HFA384X_INW(reg); -#endif /* EXTRA_FID_READ_TESTS */ -} - - -/* Called only as a tasklet (software IRQ) */ -static void prism2_rx(local_info_t *local) -{ - struct net_device *dev = local->dev; - int res, rx_pending = 0; - u16 len, hdr_len, rxfid, status, macport; - struct hfa384x_rx_frame rxdesc; - struct sk_buff *skb = NULL; - - prism2_callback(local, PRISM2_CALLBACK_RX_START); - - rxfid = prism2_read_fid_reg(dev, HFA384X_RXFID_OFF); -#ifndef final_version - if (rxfid == 0) { - rxfid = HFA384X_INW(HFA384X_RXFID_OFF); - printk(KERN_DEBUG "prism2_rx: rxfid=0 (next 0x%04x)\n", - rxfid); - if (rxfid == 0) { - schedule_work(&local->reset_queue); - goto rx_dropped; - } - /* try to continue with the new rxfid value */ - } -#endif - - spin_lock(&local->baplock); - res = hfa384x_setup_bap(dev, BAP0, rxfid, 0); - if (!res) - res = hfa384x_from_bap(dev, BAP0, &rxdesc, sizeof(rxdesc)); - - if (res) { - spin_unlock(&local->baplock); - printk(KERN_DEBUG "%s: copy from BAP0 failed %d\n", dev->name, - res); - if (res == -ETIMEDOUT) { - schedule_work(&local->reset_queue); - } - goto rx_dropped; - } - - len = le16_to_cpu(rxdesc.data_len); - hdr_len = sizeof(rxdesc); - status = le16_to_cpu(rxdesc.status); - macport = (status >> 8) & 0x07; - - /* Drop frames with too large reported payload length. Monitor mode - * seems to sometimes pass frames (e.g., ctrl::ack) with signed and - * negative value, so allow also values 65522 .. 65534 (-14 .. -2) for - * macport 7 */ - if (len > PRISM2_DATA_MAXLEN + 8 /* WEP */) { - if (macport == 7 && local->iw_mode == IW_MODE_MONITOR) { - if (len >= (u16) -14) { - hdr_len -= 65535 - len; - hdr_len--; - } - len = 0; - } else { - spin_unlock(&local->baplock); - printk(KERN_DEBUG "%s: Received frame with invalid " - "length 0x%04x\n", dev->name, len); - hostap_dump_rx_header(dev->name, &rxdesc); - goto rx_dropped; - } - } - - skb = dev_alloc_skb(len + hdr_len); - if (!skb) { - spin_unlock(&local->baplock); - printk(KERN_DEBUG "%s: RX failed to allocate skb\n", - dev->name); - goto rx_dropped; - } - skb->dev = dev; - skb_put_data(skb, &rxdesc, hdr_len); - - if (len > 0) - res = hfa384x_from_bap(dev, BAP0, skb_put(skb, len), len); - spin_unlock(&local->baplock); - if (res) { - printk(KERN_DEBUG "%s: RX failed to read " - "frame data\n", dev->name); - goto rx_dropped; - } - - skb_queue_tail(&local->rx_list, skb); - tasklet_schedule(&local->rx_tasklet); - - rx_exit: - prism2_callback(local, PRISM2_CALLBACK_RX_END); - if (!rx_pending) { - HFA384X_OUTW(HFA384X_EV_RX, HFA384X_EVACK_OFF); - } - - return; - - rx_dropped: - dev->stats.rx_dropped++; - if (skb) - dev_kfree_skb(skb); - goto rx_exit; -} - - -/* Called only as a tasklet (software IRQ) */ -static void hostap_rx_skb(local_info_t *local, struct sk_buff *skb) -{ - struct hfa384x_rx_frame *rxdesc; - struct net_device *dev = skb->dev; - struct hostap_80211_rx_status stats; - int hdrlen, rx_hdrlen; - - rx_hdrlen = sizeof(*rxdesc); - if (skb->len < sizeof(*rxdesc)) { - /* Allow monitor mode to receive shorter frames */ - if (local->iw_mode == IW_MODE_MONITOR && - skb->len >= sizeof(*rxdesc) - 30) { - rx_hdrlen = skb->len; - } else { - dev_kfree_skb(skb); - return; - } - } - - rxdesc = (struct hfa384x_rx_frame *) skb->data; - - if (local->frame_dump & PRISM2_DUMP_RX_HDR && - skb->len >= sizeof(*rxdesc)) - hostap_dump_rx_header(dev->name, rxdesc); - - if (le16_to_cpu(rxdesc->status) & HFA384X_RX_STATUS_FCSERR && - (!local->monitor_allow_fcserr || - local->iw_mode != IW_MODE_MONITOR)) - goto drop; - - if (skb->len > PRISM2_DATA_MAXLEN) { - printk(KERN_DEBUG "%s: RX: len(%d) > MAX(%d)\n", - dev->name, skb->len, PRISM2_DATA_MAXLEN); - goto drop; - } - - stats.mac_time = le32_to_cpu(rxdesc->time); - stats.signal = rxdesc->signal - local->rssi_to_dBm; - stats.noise = rxdesc->silence - local->rssi_to_dBm; - stats.rate = rxdesc->rate; - - /* Convert Prism2 RX structure into IEEE 802.11 header */ - hdrlen = hostap_80211_get_hdrlen(rxdesc->frame_control); - if (hdrlen > rx_hdrlen) - hdrlen = rx_hdrlen; - - memmove(skb_pull(skb, rx_hdrlen - hdrlen), - &rxdesc->frame_control, hdrlen); - - hostap_80211_rx(dev, skb, &stats); - return; - - drop: - dev_kfree_skb(skb); -} - - -/* Called only as a tasklet (software IRQ) */ -static void hostap_rx_tasklet(struct tasklet_struct *t) -{ - local_info_t *local = from_tasklet(local, t, rx_tasklet); - struct sk_buff *skb; - - while ((skb = skb_dequeue(&local->rx_list)) != NULL) - hostap_rx_skb(local, skb); -} - - -/* Called only from hardware IRQ */ -static void prism2_alloc_ev(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - int idx; - u16 fid; - - iface = netdev_priv(dev); - local = iface->local; - - fid = prism2_read_fid_reg(dev, HFA384X_ALLOCFID_OFF); - - PDEBUG(DEBUG_FID, "FID: interrupt: ALLOC - fid=0x%04x\n", fid); - - spin_lock(&local->txfidlock); - idx = local->next_alloc; - - do { - if (local->txfid[idx] == fid) { - PDEBUG(DEBUG_FID, "FID: found matching txfid[%d]\n", - idx); - -#ifndef final_version - if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) - printk("Already released txfid found at idx " - "%d\n", idx); - if (local->intransmitfid[idx] == PRISM2_TXFID_RESERVED) - printk("Already reserved txfid found at idx " - "%d\n", idx); -#endif - local->intransmitfid[idx] = PRISM2_TXFID_EMPTY; - idx++; - local->next_alloc = idx >= PRISM2_TXFID_COUNT ? 0 : - idx; - - if (!test_bit(HOSTAP_BITS_TRANSMIT, &local->bits) && - netif_queue_stopped(dev)) - netif_wake_queue(dev); - - spin_unlock(&local->txfidlock); - return; - } - - idx++; - if (idx >= PRISM2_TXFID_COUNT) - idx = 0; - } while (idx != local->next_alloc); - - printk(KERN_WARNING "%s: could not find matching txfid (0x%04x, new " - "read 0x%04x) for alloc event\n", dev->name, fid, - HFA384X_INW(HFA384X_ALLOCFID_OFF)); - printk(KERN_DEBUG "TXFIDs:"); - for (idx = 0; idx < PRISM2_TXFID_COUNT; idx++) - printk(" %04x[%04x]", local->txfid[idx], - local->intransmitfid[idx]); - printk("\n"); - spin_unlock(&local->txfidlock); - - /* FIX: should probably schedule reset; reference to one txfid was lost - * completely.. Bad things will happen if we run out of txfids - * Actually, this will cause netdev watchdog to notice TX timeout and - * then card reset after all txfids have been leaked. */ -} - - -/* Called only as a tasklet (software IRQ) */ -static void hostap_tx_callback(local_info_t *local, - struct hfa384x_tx_frame *txdesc, int ok, - char *payload) -{ - u16 sw_support, hdrlen, len; - struct sk_buff *skb; - struct hostap_tx_callback_info *cb; - - /* Make sure that frame was from us. */ - if (!ether_addr_equal(txdesc->addr2, local->dev->dev_addr)) { - printk(KERN_DEBUG "%s: TX callback - foreign frame\n", - local->dev->name); - return; - } - - sw_support = le32_to_cpu(txdesc->sw_support); - - spin_lock(&local->lock); - cb = local->tx_callback; - while (cb != NULL && cb->idx != sw_support) - cb = cb->next; - spin_unlock(&local->lock); - - if (cb == NULL) { - printk(KERN_DEBUG "%s: could not find TX callback (idx %d)\n", - local->dev->name, sw_support); - return; - } - - hdrlen = hostap_80211_get_hdrlen(txdesc->frame_control); - len = le16_to_cpu(txdesc->data_len); - skb = dev_alloc_skb(hdrlen + len); - if (skb == NULL) { - printk(KERN_DEBUG "%s: hostap_tx_callback failed to allocate " - "skb\n", local->dev->name); - return; - } - - skb_put_data(skb, (void *)&txdesc->frame_control, hdrlen); - if (payload) - skb_put_data(skb, payload, len); - - skb->dev = local->dev; - skb_reset_mac_header(skb); - - cb->func(skb, ok, cb->data); -} - - -/* Called only as a tasklet (software IRQ) */ -static int hostap_tx_compl_read(local_info_t *local, int error, - struct hfa384x_tx_frame *txdesc, - char **payload) -{ - u16 fid, len; - int res, ret = 0; - struct net_device *dev = local->dev; - - fid = prism2_read_fid_reg(dev, HFA384X_TXCOMPLFID_OFF); - - PDEBUG(DEBUG_FID, "interrupt: TX (err=%d) - fid=0x%04x\n", fid, error); - - spin_lock(&local->baplock); - res = hfa384x_setup_bap(dev, BAP0, fid, 0); - if (!res) - res = hfa384x_from_bap(dev, BAP0, txdesc, sizeof(*txdesc)); - if (res) { - PDEBUG(DEBUG_EXTRA, "%s: TX (err=%d) - fid=0x%04x - could not " - "read txdesc\n", dev->name, error, fid); - if (res == -ETIMEDOUT) { - schedule_work(&local->reset_queue); - } - ret = -1; - goto fail; - } - if (txdesc->sw_support) { - len = le16_to_cpu(txdesc->data_len); - if (len < PRISM2_DATA_MAXLEN) { - *payload = kmalloc(len, GFP_ATOMIC); - if (*payload == NULL || - hfa384x_from_bap(dev, BAP0, *payload, len)) { - PDEBUG(DEBUG_EXTRA, "%s: could not read TX " - "frame payload\n", dev->name); - kfree(*payload); - *payload = NULL; - ret = -1; - goto fail; - } - } - } - - fail: - spin_unlock(&local->baplock); - - return ret; -} - - -/* Called only as a tasklet (software IRQ) */ -static void prism2_tx_ev(local_info_t *local) -{ - struct net_device *dev = local->dev; - char *payload = NULL; - struct hfa384x_tx_frame txdesc; - - if (hostap_tx_compl_read(local, 0, &txdesc, &payload)) - goto fail; - - if (local->frame_dump & PRISM2_DUMP_TX_HDR) { - PDEBUG(DEBUG_EXTRA, "%s: TX - status=0x%04x " - "retry_count=%d tx_rate=%d seq_ctrl=%d " - "duration_id=%d\n", - dev->name, le16_to_cpu(txdesc.status), - txdesc.retry_count, txdesc.tx_rate, - le16_to_cpu(txdesc.seq_ctrl), - le16_to_cpu(txdesc.duration_id)); - } - - if (txdesc.sw_support) - hostap_tx_callback(local, &txdesc, 1, payload); - kfree(payload); - - fail: - HFA384X_OUTW(HFA384X_EV_TX, HFA384X_EVACK_OFF); -} - - -/* Called only as a tasklet (software IRQ) */ -static void hostap_sta_tx_exc_tasklet(struct tasklet_struct *t) -{ - local_info_t *local = from_tasklet(local, t, sta_tx_exc_tasklet); - struct sk_buff *skb; - - while ((skb = skb_dequeue(&local->sta_tx_exc_list)) != NULL) { - struct hfa384x_tx_frame *txdesc = - (struct hfa384x_tx_frame *) skb->data; - - if (skb->len >= sizeof(*txdesc)) { - /* Convert Prism2 RX structure into IEEE 802.11 header - */ - int hdrlen = hostap_80211_get_hdrlen(txdesc->frame_control); - memmove(skb_pull(skb, sizeof(*txdesc) - hdrlen), - &txdesc->frame_control, hdrlen); - - hostap_handle_sta_tx_exc(local, skb); - } - dev_kfree_skb(skb); - } -} - - -/* Called only as a tasklet (software IRQ) */ -static void prism2_txexc(local_info_t *local) -{ - struct net_device *dev = local->dev; - u16 status, fc; - int show_dump, res; - char *payload = NULL; - struct hfa384x_tx_frame txdesc; - - show_dump = local->frame_dump & PRISM2_DUMP_TXEXC_HDR; - dev->stats.tx_errors++; - - res = hostap_tx_compl_read(local, 1, &txdesc, &payload); - HFA384X_OUTW(HFA384X_EV_TXEXC, HFA384X_EVACK_OFF); - if (res) - return; - - status = le16_to_cpu(txdesc.status); - - /* We produce a TXDROP event only for retry or lifetime - * exceeded, because that's the only status that really mean - * that this particular node went away. - * Other errors means that *we* screwed up. - Jean II */ - if (status & (HFA384X_TX_STATUS_RETRYERR | HFA384X_TX_STATUS_AGEDERR)) - { - union iwreq_data wrqu; - - /* Copy 802.11 dest address. */ - memcpy(wrqu.addr.sa_data, txdesc.addr1, ETH_ALEN); - wrqu.addr.sa_family = ARPHRD_ETHER; - wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); - } else - show_dump = 1; - - if (local->iw_mode == IW_MODE_MASTER || - local->iw_mode == IW_MODE_REPEAT || - local->wds_type & HOSTAP_WDS_AP_CLIENT) { - struct sk_buff *skb; - skb = dev_alloc_skb(sizeof(txdesc)); - if (skb) { - skb_put_data(skb, &txdesc, sizeof(txdesc)); - skb_queue_tail(&local->sta_tx_exc_list, skb); - tasklet_schedule(&local->sta_tx_exc_tasklet); - } - } - - if (txdesc.sw_support) - hostap_tx_callback(local, &txdesc, 0, payload); - kfree(payload); - - if (!show_dump) - return; - - PDEBUG(DEBUG_EXTRA, "%s: TXEXC - status=0x%04x (%s%s%s%s)" - " tx_control=%04x\n", - dev->name, status, - status & HFA384X_TX_STATUS_RETRYERR ? "[RetryErr]" : "", - status & HFA384X_TX_STATUS_AGEDERR ? "[AgedErr]" : "", - status & HFA384X_TX_STATUS_DISCON ? "[Discon]" : "", - status & HFA384X_TX_STATUS_FORMERR ? "[FormErr]" : "", - le16_to_cpu(txdesc.tx_control)); - - fc = le16_to_cpu(txdesc.frame_control); - PDEBUG(DEBUG_EXTRA, " retry_count=%d tx_rate=%d fc=0x%04x " - "(%s%s%s::%d%s%s)\n", - txdesc.retry_count, txdesc.tx_rate, fc, - ieee80211_is_mgmt(txdesc.frame_control) ? "Mgmt" : "", - ieee80211_is_ctl(txdesc.frame_control) ? "Ctrl" : "", - ieee80211_is_data(txdesc.frame_control) ? "Data" : "", - (fc & IEEE80211_FCTL_STYPE) >> 4, - ieee80211_has_tods(txdesc.frame_control) ? " ToDS" : "", - ieee80211_has_fromds(txdesc.frame_control) ? " FromDS" : ""); - PDEBUG(DEBUG_EXTRA, " A1=%pM A2=%pM A3=%pM A4=%pM\n", - txdesc.addr1, txdesc.addr2, - txdesc.addr3, txdesc.addr4); -} - - -/* Called only as a tasklet (software IRQ) */ -static void hostap_info_tasklet(struct tasklet_struct *t) -{ - local_info_t *local = from_tasklet(local, t, info_tasklet); - struct sk_buff *skb; - - while ((skb = skb_dequeue(&local->info_list)) != NULL) { - hostap_info_process(local, skb); - dev_kfree_skb(skb); - } -} - - -/* Called only as a tasklet (software IRQ) */ -static void prism2_info(local_info_t *local) -{ - struct net_device *dev = local->dev; - u16 fid; - int res, left; - struct hfa384x_info_frame info; - struct sk_buff *skb; - - fid = HFA384X_INW(HFA384X_INFOFID_OFF); - - spin_lock(&local->baplock); - res = hfa384x_setup_bap(dev, BAP0, fid, 0); - if (!res) - res = hfa384x_from_bap(dev, BAP0, &info, sizeof(info)); - if (res) { - spin_unlock(&local->baplock); - printk(KERN_DEBUG "Could not get info frame (fid=0x%04x)\n", - fid); - if (res == -ETIMEDOUT) { - schedule_work(&local->reset_queue); - } - goto out; - } - - left = (le16_to_cpu(info.len) - 1) * 2; - - if (info.len & cpu_to_le16(0x8000) || info.len == 0 || left > 2060) { - /* data register seems to give 0x8000 in some error cases even - * though busy bit is not set in offset register; - * in addition, length must be at least 1 due to type field */ - spin_unlock(&local->baplock); - printk(KERN_DEBUG "%s: Received info frame with invalid " - "length 0x%04x (type 0x%04x)\n", dev->name, - le16_to_cpu(info.len), le16_to_cpu(info.type)); - goto out; - } - - skb = dev_alloc_skb(sizeof(info) + left); - if (skb == NULL) { - spin_unlock(&local->baplock); - printk(KERN_DEBUG "%s: Could not allocate skb for info " - "frame\n", dev->name); - goto out; - } - - skb_put_data(skb, &info, sizeof(info)); - if (left > 0 && hfa384x_from_bap(dev, BAP0, skb_put(skb, left), left)) - { - spin_unlock(&local->baplock); - printk(KERN_WARNING "%s: Info frame read failed (fid=0x%04x, " - "len=0x%04x, type=0x%04x\n", dev->name, fid, - le16_to_cpu(info.len), le16_to_cpu(info.type)); - dev_kfree_skb(skb); - goto out; - } - spin_unlock(&local->baplock); - - skb_queue_tail(&local->info_list, skb); - tasklet_schedule(&local->info_tasklet); - - out: - HFA384X_OUTW(HFA384X_EV_INFO, HFA384X_EVACK_OFF); -} - - -/* Called only as a tasklet (software IRQ) */ -static void hostap_bap_tasklet(struct tasklet_struct *t) -{ - local_info_t *local = from_tasklet(local, t, bap_tasklet); - struct net_device *dev = local->dev; - u16 ev; - int frames = 30; - - if (local->func->card_present && !local->func->card_present(local)) - return; - - set_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits); - - /* Process all pending BAP events without generating new interrupts - * for them */ - while (frames-- > 0) { - ev = HFA384X_INW(HFA384X_EVSTAT_OFF); - if (ev == 0xffff || !(ev & HFA384X_BAP0_EVENTS)) - break; - if (ev & HFA384X_EV_RX) - prism2_rx(local); - if (ev & HFA384X_EV_INFO) - prism2_info(local); - if (ev & HFA384X_EV_TX) - prism2_tx_ev(local); - if (ev & HFA384X_EV_TXEXC) - prism2_txexc(local); - } - - set_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits); - clear_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits); - - /* Enable interrupts for new BAP events */ - hfa384x_events_all(dev); - clear_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits); -} - - -/* Called only from hardware IRQ */ -static void prism2_infdrop(struct net_device *dev) -{ - static unsigned long last_inquire = 0; - - PDEBUG(DEBUG_EXTRA, "%s: INFDROP event\n", dev->name); - - /* some firmware versions seem to get stuck with - * full CommTallies in high traffic load cases; every - * packet will then cause INFDROP event and CommTallies - * info frame will not be sent automatically. Try to - * get out of this state by inquiring CommTallies. */ - if (!last_inquire || time_after(jiffies, last_inquire + HZ)) { - hfa384x_cmd_callback(dev, HFA384X_CMDCODE_INQUIRE, - HFA384X_INFO_COMMTALLIES, NULL, 0); - last_inquire = jiffies; - } -} - - -/* Called only from hardware IRQ */ -static void prism2_ev_tick(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - u16 evstat, inten; - static int prev_stuck = 0; - - iface = netdev_priv(dev); - local = iface->local; - - if (time_after(jiffies, local->last_tick_timer + 5 * HZ) && - local->last_tick_timer) { - evstat = HFA384X_INW(HFA384X_EVSTAT_OFF); - inten = HFA384X_INW(HFA384X_INTEN_OFF); - if (!prev_stuck) { - printk(KERN_INFO "%s: SW TICK stuck? " - "bits=0x%lx EvStat=%04x IntEn=%04x\n", - dev->name, local->bits, evstat, inten); - } - local->sw_tick_stuck++; - if ((evstat & HFA384X_BAP0_EVENTS) && - (inten & HFA384X_BAP0_EVENTS)) { - printk(KERN_INFO "%s: trying to recover from IRQ " - "hang\n", dev->name); - hfa384x_events_no_bap0(dev); - } - prev_stuck = 1; - } else - prev_stuck = 0; -} - - -/* Called only from hardware IRQ */ -static void prism2_check_magic(local_info_t *local) -{ - /* at least PCI Prism2.5 with bus mastering seems to sometimes - * return 0x0000 in SWSUPPORT0 for unknown reason, but re-reading the - * register once or twice seems to get the correct value.. PCI cards - * cannot anyway be removed during normal operation, so there is not - * really any need for this verification with them. */ - -#ifndef PRISM2_PCI -#ifndef final_version - static unsigned long last_magic_err = 0; - struct net_device *dev = local->dev; - - if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) { - if (!local->hw_ready) - return; - HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); - if (time_after(jiffies, last_magic_err + 10 * HZ)) { - printk("%s: Interrupt, but SWSUPPORT0 does not match: " - "%04X != %04X - card removed?\n", dev->name, - HFA384X_INW(HFA384X_SWSUPPORT0_OFF), - HFA384X_MAGIC); - last_magic_err = jiffies; - } else if (net_ratelimit()) { - printk(KERN_DEBUG "%s: interrupt - SWSUPPORT0=%04x " - "MAGIC=%04x\n", dev->name, - HFA384X_INW(HFA384X_SWSUPPORT0_OFF), - HFA384X_MAGIC); - } - if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != 0xffff) - schedule_work(&local->reset_queue); - return; - } -#endif /* final_version */ -#endif /* !PRISM2_PCI */ -} - - -/* Called only from hardware IRQ */ -static irqreturn_t prism2_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct hostap_interface *iface; - local_info_t *local; - int events = 0; - u16 ev; - - iface = netdev_priv(dev); - local = iface->local; - - /* Detect early interrupt before driver is fully configured */ - spin_lock(&local->irq_init_lock); - if (!dev->base_addr) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n", - dev->name); - } - spin_unlock(&local->irq_init_lock); - return IRQ_HANDLED; - } - spin_unlock(&local->irq_init_lock); - - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); - - if (local->func->card_present && !local->func->card_present(local)) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: Interrupt, but dev not OK\n", - dev->name); - } - return IRQ_HANDLED; - } - - prism2_check_magic(local); - - for (;;) { - ev = HFA384X_INW(HFA384X_EVSTAT_OFF); - if (ev == 0xffff) { - if (local->shutdown) - return IRQ_HANDLED; - HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); - printk(KERN_DEBUG "%s: prism2_interrupt: ev=0xffff\n", - dev->name); - return IRQ_HANDLED; - } - - ev &= HFA384X_INW(HFA384X_INTEN_OFF); - if (ev == 0) - break; - - if (ev & HFA384X_EV_CMD) { - prism2_cmd_ev(dev); - } - - /* Above events are needed even before hw is ready, but other - * events should be skipped during initialization. This may - * change for AllocEv if allocate_fid is implemented without - * busy waiting. */ - if (!local->hw_ready || local->hw_resetting || - !local->dev_enabled) { - ev = HFA384X_INW(HFA384X_EVSTAT_OFF); - if (ev & HFA384X_EV_CMD) - goto next_event; - if ((ev & HFA384X_EVENT_MASK) == 0) - return IRQ_HANDLED; - if (local->dev_enabled && (ev & ~HFA384X_EV_TICK) && - net_ratelimit()) { - printk(KERN_DEBUG "%s: prism2_interrupt: hw " - "not ready; skipping events 0x%04x " - "(IntEn=0x%04x)%s%s%s\n", - dev->name, ev, - HFA384X_INW(HFA384X_INTEN_OFF), - !local->hw_ready ? " (!hw_ready)" : "", - local->hw_resetting ? - " (hw_resetting)" : "", - !local->dev_enabled ? - " (!dev_enabled)" : ""); - } - HFA384X_OUTW(ev, HFA384X_EVACK_OFF); - return IRQ_HANDLED; - } - - if (ev & HFA384X_EV_TICK) { - prism2_ev_tick(dev); - HFA384X_OUTW(HFA384X_EV_TICK, HFA384X_EVACK_OFF); - } - - if (ev & HFA384X_EV_ALLOC) { - prism2_alloc_ev(dev); - HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF); - } - - /* Reading data from the card is quite time consuming, so do it - * in tasklets. TX, TXEXC, RX, and INFO events will be ACKed - * and unmasked after needed data has been read completely. */ - if (ev & HFA384X_BAP0_EVENTS) { - hfa384x_events_no_bap0(dev); - tasklet_schedule(&local->bap_tasklet); - } - -#ifndef final_version - if (ev & HFA384X_EV_WTERR) { - PDEBUG(DEBUG_EXTRA, "%s: WTERR event\n", dev->name); - HFA384X_OUTW(HFA384X_EV_WTERR, HFA384X_EVACK_OFF); - } -#endif /* final_version */ - - if (ev & HFA384X_EV_INFDROP) { - prism2_infdrop(dev); - HFA384X_OUTW(HFA384X_EV_INFDROP, HFA384X_EVACK_OFF); - } - - next_event: - events++; - if (events >= PRISM2_MAX_INTERRUPT_EVENTS) { - PDEBUG(DEBUG_EXTRA, "prism2_interrupt: >%d events " - "(EvStat=0x%04x)\n", - PRISM2_MAX_INTERRUPT_EVENTS, - HFA384X_INW(HFA384X_EVSTAT_OFF)); - break; - } - } - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 1); - return IRQ_RETVAL(events); -} - - -static void prism2_check_sta_fw_version(local_info_t *local) -{ - struct hfa384x_comp_ident comp; - int id, variant, major, minor; - - if (hfa384x_get_rid(local->dev, HFA384X_RID_STAID, - &comp, sizeof(comp), 1) < 0) - return; - - local->fw_ap = 0; - id = le16_to_cpu(comp.id); - if (id != HFA384X_COMP_ID_STA) { - if (id == HFA384X_COMP_ID_FW_AP) - local->fw_ap = 1; - return; - } - - major = __le16_to_cpu(comp.major); - minor = __le16_to_cpu(comp.minor); - variant = __le16_to_cpu(comp.variant); - local->sta_fw_ver = PRISM2_FW_VER(major, minor, variant); - - /* Station firmware versions before 1.4.x seem to have a bug in - * firmware-based WEP encryption when using Host AP mode, so use - * host_encrypt as a default for them. Firmware version 1.4.9 is the - * first one that has been seen to produce correct encryption, but the - * bug might be fixed before that (although, at least 1.4.2 is broken). - */ - local->fw_encrypt_ok = local->sta_fw_ver >= PRISM2_FW_VER(1,4,9); - - if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && - !local->fw_encrypt_ok) { - printk(KERN_DEBUG "%s: defaulting to host-based encryption as " - "a workaround for firmware bug in Host AP mode WEP\n", - local->dev->name); - local->host_encrypt = 1; - } - - /* IEEE 802.11 standard compliant WDS frames (4 addresses) were broken - * in station firmware versions before 1.5.x. With these versions, the - * driver uses a workaround with bogus frame format (4th address after - * the payload). This is not compatible with other AP devices. Since - * the firmware bug is fixed in the latest station firmware versions, - * automatically enable standard compliant mode for cards using station - * firmware version 1.5.0 or newer. */ - if (local->sta_fw_ver >= PRISM2_FW_VER(1,5,0)) - local->wds_type |= HOSTAP_WDS_STANDARD_FRAME; - else { - printk(KERN_DEBUG "%s: defaulting to bogus WDS frame as a " - "workaround for firmware bug in Host AP mode WDS\n", - local->dev->name); - } - - hostap_check_sta_fw_version(local->ap, local->sta_fw_ver); -} - - -static void hostap_passive_scan(struct timer_list *t) -{ - local_info_t *local = from_timer(local, t, passive_scan_timer); - struct net_device *dev = local->dev; - u16 chan; - - if (local->passive_scan_interval <= 0) - return; - - if (local->passive_scan_state == PASSIVE_SCAN_LISTEN) { - int max_tries = 16; - - /* Even though host system does not really know when the WLAN - * MAC is sending frames, try to avoid changing channels for - * passive scanning when a host-generated frame is being - * transmitted */ - if (test_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { - printk(KERN_DEBUG "%s: passive scan detected pending " - "TX - delaying\n", dev->name); - local->passive_scan_timer.expires = jiffies + HZ / 10; - add_timer(&local->passive_scan_timer); - return; - } - - do { - local->passive_scan_channel++; - if (local->passive_scan_channel > 14) - local->passive_scan_channel = 1; - max_tries--; - } while (!(local->channel_mask & - (1 << (local->passive_scan_channel - 1))) && - max_tries > 0); - - if (max_tries == 0) { - printk(KERN_INFO "%s: no allowed passive scan channels" - " found\n", dev->name); - return; - } - - printk(KERN_DEBUG "%s: passive scan channel %d\n", - dev->name, local->passive_scan_channel); - chan = local->passive_scan_channel; - local->passive_scan_state = PASSIVE_SCAN_WAIT; - local->passive_scan_timer.expires = jiffies + HZ / 10; - } else { - chan = local->channel; - local->passive_scan_state = PASSIVE_SCAN_LISTEN; - local->passive_scan_timer.expires = jiffies + - local->passive_scan_interval * HZ; - } - - if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST | - (HFA384X_TEST_CHANGE_CHANNEL << 8), - chan, NULL, 0)) - printk(KERN_ERR "%s: passive scan channel set %d " - "failed\n", dev->name, chan); - - add_timer(&local->passive_scan_timer); -} - - -/* Called only as a scheduled task when communications quality values should - * be updated. */ -static void handle_comms_qual_update(struct work_struct *work) -{ - local_info_t *local = - container_of(work, local_info_t, comms_qual_update); - prism2_update_comms_qual(local->dev); -} - - -/* Software watchdog - called as a timer. Hardware interrupt (Tick event) is - * used to monitor that local->last_tick_timer is being updated. If not, - * interrupt busy-loop is assumed and driver tries to recover by masking out - * some events. */ -static void hostap_tick_timer(struct timer_list *t) -{ - static unsigned long last_inquire = 0; - local_info_t *local = from_timer(local, t, tick_timer); - local->last_tick_timer = jiffies; - - /* Inquire CommTallies every 10 seconds to keep the statistics updated - * more often during low load and when using 32-bit tallies. */ - if ((!last_inquire || time_after(jiffies, last_inquire + 10 * HZ)) && - !local->hw_downloading && local->hw_ready && - !local->hw_resetting && local->dev_enabled) { - hfa384x_cmd_callback(local->dev, HFA384X_CMDCODE_INQUIRE, - HFA384X_INFO_COMMTALLIES, NULL, 0); - last_inquire = jiffies; - } - - if ((local->last_comms_qual_update == 0 || - time_after(jiffies, local->last_comms_qual_update + 10 * HZ)) && - (local->iw_mode == IW_MODE_INFRA || - local->iw_mode == IW_MODE_ADHOC)) { - schedule_work(&local->comms_qual_update); - } - - local->tick_timer.expires = jiffies + 2 * HZ; - add_timer(&local->tick_timer); -} - - -#if !defined(PRISM2_NO_PROCFS_DEBUG) && defined(CONFIG_PROC_FS) -static u16 hfa384x_read_reg(struct net_device *dev, u16 reg) -{ - return HFA384X_INW(reg); -} - -static int prism2_registers_proc_show(struct seq_file *m, void *v) -{ - local_info_t *local = m->private; - -#define SHOW_REG(n) \ - seq_printf(m, #n "=%04x\n", hfa384x_read_reg(local->dev, HFA384X_##n##_OFF)) - - SHOW_REG(CMD); - SHOW_REG(PARAM0); - SHOW_REG(PARAM1); - SHOW_REG(PARAM2); - SHOW_REG(STATUS); - SHOW_REG(RESP0); - SHOW_REG(RESP1); - SHOW_REG(RESP2); - SHOW_REG(INFOFID); - SHOW_REG(CONTROL); - SHOW_REG(SELECT0); - SHOW_REG(SELECT1); - SHOW_REG(OFFSET0); - SHOW_REG(OFFSET1); - SHOW_REG(RXFID); - SHOW_REG(ALLOCFID); - SHOW_REG(TXCOMPLFID); - SHOW_REG(SWSUPPORT0); - SHOW_REG(SWSUPPORT1); - SHOW_REG(SWSUPPORT2); - SHOW_REG(EVSTAT); - SHOW_REG(INTEN); - SHOW_REG(EVACK); - /* Do not read data registers, because they change the state of the - * MAC (offset += 2) */ - /* SHOW_REG(DATA0); */ - /* SHOW_REG(DATA1); */ - SHOW_REG(AUXPAGE); - SHOW_REG(AUXOFFSET); - /* SHOW_REG(AUXDATA); */ -#ifdef PRISM2_PCI - SHOW_REG(PCICOR); - SHOW_REG(PCIHCR); - SHOW_REG(PCI_M0_ADDRH); - SHOW_REG(PCI_M0_ADDRL); - SHOW_REG(PCI_M0_LEN); - SHOW_REG(PCI_M0_CTL); - SHOW_REG(PCI_STATUS); - SHOW_REG(PCI_M1_ADDRH); - SHOW_REG(PCI_M1_ADDRL); - SHOW_REG(PCI_M1_LEN); - SHOW_REG(PCI_M1_CTL); -#endif /* PRISM2_PCI */ - - return 0; -} -#endif - -struct set_tim_data { - struct list_head list; - int aid; - int set; -}; - -static int prism2_set_tim(struct net_device *dev, int aid, int set) -{ - struct list_head *ptr; - struct set_tim_data *new_entry; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - new_entry = kzalloc(sizeof(*new_entry), GFP_ATOMIC); - if (new_entry == NULL) - return -ENOMEM; - - new_entry->aid = aid; - new_entry->set = set; - - spin_lock_bh(&local->set_tim_lock); - list_for_each(ptr, &local->set_tim_list) { - struct set_tim_data *entry = - list_entry(ptr, struct set_tim_data, list); - if (entry->aid == aid) { - PDEBUG(DEBUG_PS2, "%s: prism2_set_tim: aid=%d " - "set=%d ==> %d\n", - local->dev->name, aid, entry->set, set); - entry->set = set; - kfree(new_entry); - new_entry = NULL; - break; - } - } - if (new_entry) - list_add_tail(&new_entry->list, &local->set_tim_list); - spin_unlock_bh(&local->set_tim_lock); - - schedule_work(&local->set_tim_queue); - - return 0; -} - - -static void handle_set_tim_queue(struct work_struct *work) -{ - local_info_t *local = container_of(work, local_info_t, set_tim_queue); - struct set_tim_data *entry; - u16 val; - - for (;;) { - entry = NULL; - spin_lock_bh(&local->set_tim_lock); - if (!list_empty(&local->set_tim_list)) { - entry = list_entry(local->set_tim_list.next, - struct set_tim_data, list); - list_del(&entry->list); - } - spin_unlock_bh(&local->set_tim_lock); - if (!entry) - break; - - PDEBUG(DEBUG_PS2, "%s: handle_set_tim_queue: aid=%d set=%d\n", - local->dev->name, entry->aid, entry->set); - - val = entry->aid; - if (entry->set) - val |= 0x8000; - if (hostap_set_word(local->dev, HFA384X_RID_CNFTIMCTRL, val)) { - printk(KERN_DEBUG "%s: set_tim failed (aid=%d " - "set=%d)\n", - local->dev->name, entry->aid, entry->set); - } - - kfree(entry); - } -} - - -static void prism2_clear_set_tim_queue(local_info_t *local) -{ - struct list_head *ptr, *n; - - list_for_each_safe(ptr, n, &local->set_tim_list) { - struct set_tim_data *entry; - entry = list_entry(ptr, struct set_tim_data, list); - list_del(&entry->list); - kfree(entry); - } -} - - -/* - * HostAP uses two layers of net devices, where the inner - * layer gets called all the time from the outer layer. - * This is a natural nesting, which needs a split lock type. - */ -static struct lock_class_key hostap_netdev_xmit_lock_key; -static struct lock_class_key hostap_netdev_addr_lock_key; - -static void prism2_set_lockdep_class_one(struct net_device *dev, - struct netdev_queue *txq, - void *_unused) -{ - lockdep_set_class(&txq->_xmit_lock, - &hostap_netdev_xmit_lock_key); -} - -static void prism2_set_lockdep_class(struct net_device *dev) -{ - lockdep_set_class(&dev->addr_list_lock, - &hostap_netdev_addr_lock_key); - netdev_for_each_tx_queue(dev, prism2_set_lockdep_class_one, NULL); -} - -static struct net_device * -prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx, - struct device *sdev) -{ - struct net_device *dev; - struct hostap_interface *iface; - struct local_info *local; - int len, i, ret; - - if (funcs == NULL) - return NULL; - - len = strlen(dev_template); - if (len >= IFNAMSIZ || strstr(dev_template, "%d") == NULL) { - printk(KERN_WARNING "hostap: Invalid dev_template='%s'\n", - dev_template); - return NULL; - } - - len = sizeof(struct hostap_interface) + - 3 + sizeof(struct local_info) + - 3 + sizeof(struct ap_data); - - dev = alloc_etherdev(len); - if (dev == NULL) - return NULL; - - iface = netdev_priv(dev); - local = (struct local_info *) ((((long) (iface + 1)) + 3) & ~3); - local->ap = (struct ap_data *) ((((long) (local + 1)) + 3) & ~3); - local->dev = iface->dev = dev; - iface->local = local; - iface->type = HOSTAP_INTERFACE_MASTER; - INIT_LIST_HEAD(&local->hostap_interfaces); - - local->hw_module = THIS_MODULE; - -#ifdef PRISM2_IO_DEBUG - local->io_debug_enabled = 1; -#endif /* PRISM2_IO_DEBUG */ - - local->func = funcs; - local->func->cmd = hfa384x_cmd; - local->func->read_regs = hfa384x_read_regs; - local->func->get_rid = hfa384x_get_rid; - local->func->set_rid = hfa384x_set_rid; - local->func->hw_enable = prism2_hw_enable; - local->func->hw_config = prism2_hw_config; - local->func->hw_reset = prism2_hw_reset; - local->func->hw_shutdown = prism2_hw_shutdown; - local->func->reset_port = prism2_reset_port; - local->func->schedule_reset = prism2_schedule_reset; -#ifdef PRISM2_DOWNLOAD_SUPPORT - local->func->read_aux_proc_ops = &prism2_download_aux_dump_proc_ops; - local->func->download = prism2_download; -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - local->func->tx = prism2_tx_80211; - local->func->set_tim = prism2_set_tim; - local->func->need_tx_headroom = 0; /* no need to add txdesc in - * skb->data (FIX: maybe for DMA bus - * mastering? */ - - local->mtu = mtu; - - rwlock_init(&local->iface_lock); - spin_lock_init(&local->txfidlock); - spin_lock_init(&local->cmdlock); - spin_lock_init(&local->baplock); - spin_lock_init(&local->lock); - spin_lock_init(&local->irq_init_lock); - mutex_init(&local->rid_bap_mtx); - - if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES) - card_idx = 0; - local->card_idx = card_idx; - - len = strlen(essid); - memcpy(local->essid, essid, - len > MAX_SSID_LEN ? MAX_SSID_LEN : len); - local->essid[MAX_SSID_LEN] = '\0'; - i = GET_INT_PARM(iw_mode, card_idx); - if ((i >= IW_MODE_ADHOC && i <= IW_MODE_REPEAT) || - i == IW_MODE_MONITOR) { - local->iw_mode = i; - } else { - printk(KERN_WARNING "prism2: Unknown iw_mode %d; using " - "IW_MODE_MASTER\n", i); - local->iw_mode = IW_MODE_MASTER; - } - local->channel = GET_INT_PARM(channel, card_idx); - local->beacon_int = GET_INT_PARM(beacon_int, card_idx); - local->dtim_period = GET_INT_PARM(dtim_period, card_idx); - local->wds_max_connections = 16; - local->tx_control = HFA384X_TX_CTRL_FLAGS; - local->manual_retry_count = -1; - local->rts_threshold = 2347; - local->fragm_threshold = 2346; - local->rssi_to_dBm = 100; /* default; to be overriden by - * cnfDbmAdjust, if available */ - local->auth_algs = PRISM2_AUTH_OPEN | PRISM2_AUTH_SHARED_KEY; - local->sram_type = -1; - local->scan_channel_mask = 0xffff; - local->monitor_type = PRISM2_MONITOR_RADIOTAP; - - /* Initialize task queue structures */ - INIT_WORK(&local->reset_queue, handle_reset_queue); - INIT_WORK(&local->set_multicast_list_queue, - hostap_set_multicast_list_queue); - - INIT_WORK(&local->set_tim_queue, handle_set_tim_queue); - INIT_LIST_HEAD(&local->set_tim_list); - spin_lock_init(&local->set_tim_lock); - - INIT_WORK(&local->comms_qual_update, handle_comms_qual_update); - - /* Initialize tasklets for handling hardware IRQ related operations - * outside hw IRQ handler */ - tasklet_setup(&local->bap_tasklet, hostap_bap_tasklet); - tasklet_setup(&local->info_tasklet, hostap_info_tasklet); - hostap_info_init(local); - - tasklet_setup(&local->rx_tasklet, hostap_rx_tasklet); - skb_queue_head_init(&local->rx_list); - - tasklet_setup(&local->sta_tx_exc_tasklet, - hostap_sta_tx_exc_tasklet); - skb_queue_head_init(&local->sta_tx_exc_list); - - INIT_LIST_HEAD(&local->cmd_queue); - init_waitqueue_head(&local->hostscan_wq); - - lib80211_crypt_info_init(&local->crypt_info, dev->name, &local->lock); - - timer_setup(&local->passive_scan_timer, hostap_passive_scan, 0); - timer_setup(&local->tick_timer, hostap_tick_timer, 0); - local->tick_timer.expires = jiffies + 2 * HZ; - add_timer(&local->tick_timer); - - INIT_LIST_HEAD(&local->bss_list); - - hostap_setup_dev(dev, local, HOSTAP_INTERFACE_MASTER); - - dev->type = ARPHRD_IEEE80211; - dev->header_ops = &hostap_80211_ops; - - rtnl_lock(); - ret = dev_alloc_name(dev, "wifi%d"); - SET_NETDEV_DEV(dev, sdev); - if (ret >= 0) - ret = register_netdevice(dev); - - prism2_set_lockdep_class(dev); - rtnl_unlock(); - if (ret < 0) { - printk(KERN_WARNING "%s: register netdevice failed!\n", - dev_info); - goto fail; - } - printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name); - - hostap_init_data(local); - return dev; - - fail: - free_netdev(dev); - return NULL; -} - - -static int hostap_hw_ready(struct net_device *dev) -{ - struct hostap_interface *iface; - struct local_info *local; - - iface = netdev_priv(dev); - local = iface->local; - local->ddev = hostap_add_interface(local, HOSTAP_INTERFACE_MAIN, 0, - "", dev_template); - - if (local->ddev) { - if (local->iw_mode == IW_MODE_INFRA || - local->iw_mode == IW_MODE_ADHOC) { - netif_carrier_off(local->dev); - netif_carrier_off(local->ddev); - } - hostap_init_proc(local); -#ifndef PRISM2_NO_PROCFS_DEBUG - proc_create_single_data("registers", 0, local->proc, - prism2_registers_proc_show, local); -#endif /* PRISM2_NO_PROCFS_DEBUG */ - hostap_init_ap_proc(local); - return 0; - } - - return -1; -} - - -static void prism2_free_local_data(struct net_device *dev) -{ - struct hostap_tx_callback_info *tx_cb, *tx_cb_prev; - int i; - struct hostap_interface *iface; - struct local_info *local; - struct list_head *ptr, *n; - - if (dev == NULL) - return; - - iface = netdev_priv(dev); - local = iface->local; - - /* Unregister all netdevs before freeing local data. */ - list_for_each_safe(ptr, n, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - if (iface->type == HOSTAP_INTERFACE_MASTER) { - /* special handling for this interface below */ - continue; - } - hostap_remove_interface(iface->dev, 0, 1); - } - - unregister_netdev(local->dev); - - flush_work(&local->reset_queue); - flush_work(&local->set_multicast_list_queue); - flush_work(&local->set_tim_queue); -#ifndef PRISM2_NO_STATION_MODES - flush_work(&local->info_queue); -#endif - flush_work(&local->comms_qual_update); - - lib80211_crypt_info_free(&local->crypt_info); - - if (timer_pending(&local->passive_scan_timer)) - del_timer(&local->passive_scan_timer); - - if (timer_pending(&local->tick_timer)) - del_timer(&local->tick_timer); - - prism2_clear_cmd_queue(local); - - skb_queue_purge(&local->info_list); - skb_queue_purge(&local->rx_list); - skb_queue_purge(&local->sta_tx_exc_list); - - if (local->dev_enabled) - prism2_callback(local, PRISM2_CALLBACK_DISABLE); - - if (local->ap != NULL) - hostap_free_data(local->ap); - -#ifndef PRISM2_NO_PROCFS_DEBUG - if (local->proc != NULL) - remove_proc_entry("registers", local->proc); -#endif /* PRISM2_NO_PROCFS_DEBUG */ - hostap_remove_proc(local); - - tx_cb = local->tx_callback; - while (tx_cb != NULL) { - tx_cb_prev = tx_cb; - tx_cb = tx_cb->next; - kfree(tx_cb_prev); - } - - hostap_set_hostapd(local, 0, 0); - hostap_set_hostapd_sta(local, 0, 0); - - for (i = 0; i < PRISM2_FRAG_CACHE_LEN; i++) { - if (local->frag_cache[i].skb != NULL) - dev_kfree_skb(local->frag_cache[i].skb); - } - -#ifdef PRISM2_DOWNLOAD_SUPPORT - prism2_download_free_data(local->dl_pri); - prism2_download_free_data(local->dl_sec); -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - - prism2_clear_set_tim_queue(local); - - list_for_each_safe(ptr, n, &local->bss_list) { - struct hostap_bss_info *bss = - list_entry(ptr, struct hostap_bss_info, list); - kfree(bss); - } - - kfree(local->pda); - kfree(local->last_scan_results); - kfree(local->generic_elem); - - free_netdev(local->dev); -} - - -#if defined(PRISM2_PCI) || defined(PRISM2_PCCARD) -static void __maybe_unused prism2_suspend(struct net_device *dev) -{ - struct hostap_interface *iface; - struct local_info *local; - union iwreq_data wrqu; - - iface = netdev_priv(dev); - local = iface->local; - - /* Send disconnect event, e.g., to trigger reassociation after resume - * if wpa_supplicant is used. */ - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.ap_addr.sa_family = ARPHRD_ETHER; - wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); - - /* Disable hardware and firmware */ - prism2_hw_shutdown(dev, 0); -} -#endif /* PRISM2_PCI || PRISM2_PCCARD */ - - -/* These might at some point be compiled separately and used as separate - * kernel modules or linked into one */ -#ifdef PRISM2_DOWNLOAD_SUPPORT -#include "hostap_download.c" -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - -#ifdef PRISM2_CALLBACK -/* External hostap_callback.c file can be used to, e.g., blink activity led. - * This can use platform specific code and must define prism2_callback() - * function (if PRISM2_CALLBACK is not defined, these function calls are not - * used. */ -#include "hostap_callback.c" -#endif /* PRISM2_CALLBACK */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_info.c b/drivers/net/wireless/intersil/hostap/hostap_info.c deleted file mode 100644 index da8c30f10d..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_info.c +++ /dev/null @@ -1,509 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Host AP driver Info Frame processing (part of hostap.o module) */ - -#include <linux/if_arp.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/export.h> -#include <linux/etherdevice.h> -#include "hostap_wlan.h" -#include "hostap.h" -#include "hostap_ap.h" - -/* Called only as a tasklet (software IRQ) */ -static void prism2_info_commtallies16(local_info_t *local, unsigned char *buf, - int left) -{ - struct hfa384x_comm_tallies *tallies; - - if (left < sizeof(struct hfa384x_comm_tallies)) { - printk(KERN_DEBUG "%s: too short (len=%d) commtallies " - "info frame\n", local->dev->name, left); - return; - } - - tallies = (struct hfa384x_comm_tallies *) buf; -#define ADD_COMM_TALLIES(name) \ -local->comm_tallies.name += le16_to_cpu(tallies->name) - ADD_COMM_TALLIES(tx_unicast_frames); - ADD_COMM_TALLIES(tx_multicast_frames); - ADD_COMM_TALLIES(tx_fragments); - ADD_COMM_TALLIES(tx_unicast_octets); - ADD_COMM_TALLIES(tx_multicast_octets); - ADD_COMM_TALLIES(tx_deferred_transmissions); - ADD_COMM_TALLIES(tx_single_retry_frames); - ADD_COMM_TALLIES(tx_multiple_retry_frames); - ADD_COMM_TALLIES(tx_retry_limit_exceeded); - ADD_COMM_TALLIES(tx_discards); - ADD_COMM_TALLIES(rx_unicast_frames); - ADD_COMM_TALLIES(rx_multicast_frames); - ADD_COMM_TALLIES(rx_fragments); - ADD_COMM_TALLIES(rx_unicast_octets); - ADD_COMM_TALLIES(rx_multicast_octets); - ADD_COMM_TALLIES(rx_fcs_errors); - ADD_COMM_TALLIES(rx_discards_no_buffer); - ADD_COMM_TALLIES(tx_discards_wrong_sa); - ADD_COMM_TALLIES(rx_discards_wep_undecryptable); - ADD_COMM_TALLIES(rx_message_in_msg_fragments); - ADD_COMM_TALLIES(rx_message_in_bad_msg_fragments); -#undef ADD_COMM_TALLIES -} - - -/* Called only as a tasklet (software IRQ) */ -static void prism2_info_commtallies32(local_info_t *local, unsigned char *buf, - int left) -{ - struct hfa384x_comm_tallies32 *tallies; - - if (left < sizeof(struct hfa384x_comm_tallies32)) { - printk(KERN_DEBUG "%s: too short (len=%d) commtallies32 " - "info frame\n", local->dev->name, left); - return; - } - - tallies = (struct hfa384x_comm_tallies32 *) buf; -#define ADD_COMM_TALLIES(name) \ -local->comm_tallies.name += le32_to_cpu(tallies->name) - ADD_COMM_TALLIES(tx_unicast_frames); - ADD_COMM_TALLIES(tx_multicast_frames); - ADD_COMM_TALLIES(tx_fragments); - ADD_COMM_TALLIES(tx_unicast_octets); - ADD_COMM_TALLIES(tx_multicast_octets); - ADD_COMM_TALLIES(tx_deferred_transmissions); - ADD_COMM_TALLIES(tx_single_retry_frames); - ADD_COMM_TALLIES(tx_multiple_retry_frames); - ADD_COMM_TALLIES(tx_retry_limit_exceeded); - ADD_COMM_TALLIES(tx_discards); - ADD_COMM_TALLIES(rx_unicast_frames); - ADD_COMM_TALLIES(rx_multicast_frames); - ADD_COMM_TALLIES(rx_fragments); - ADD_COMM_TALLIES(rx_unicast_octets); - ADD_COMM_TALLIES(rx_multicast_octets); - ADD_COMM_TALLIES(rx_fcs_errors); - ADD_COMM_TALLIES(rx_discards_no_buffer); - ADD_COMM_TALLIES(tx_discards_wrong_sa); - ADD_COMM_TALLIES(rx_discards_wep_undecryptable); - ADD_COMM_TALLIES(rx_message_in_msg_fragments); - ADD_COMM_TALLIES(rx_message_in_bad_msg_fragments); -#undef ADD_COMM_TALLIES -} - - -/* Called only as a tasklet (software IRQ) */ -static void prism2_info_commtallies(local_info_t *local, unsigned char *buf, - int left) -{ - if (local->tallies32) - prism2_info_commtallies32(local, buf, left); - else - prism2_info_commtallies16(local, buf, left); -} - - -#ifndef PRISM2_NO_STATION_MODES -#ifndef PRISM2_NO_DEBUG -static const char* hfa384x_linkstatus_str(u16 linkstatus) -{ - switch (linkstatus) { - case HFA384X_LINKSTATUS_CONNECTED: - return "Connected"; - case HFA384X_LINKSTATUS_DISCONNECTED: - return "Disconnected"; - case HFA384X_LINKSTATUS_AP_CHANGE: - return "Access point change"; - case HFA384X_LINKSTATUS_AP_OUT_OF_RANGE: - return "Access point out of range"; - case HFA384X_LINKSTATUS_AP_IN_RANGE: - return "Access point in range"; - case HFA384X_LINKSTATUS_ASSOC_FAILED: - return "Association failed"; - default: - return "Unknown"; - } -} -#endif /* PRISM2_NO_DEBUG */ - - -/* Called only as a tasklet (software IRQ) */ -static void prism2_info_linkstatus(local_info_t *local, unsigned char *buf, - int left) -{ - u16 val; - int non_sta_mode; - - /* Alloc new JoinRequests to occur since LinkStatus for the previous - * has been received */ - local->last_join_time = 0; - - if (left != 2) { - printk(KERN_DEBUG "%s: invalid linkstatus info frame " - "length %d\n", local->dev->name, left); - return; - } - - non_sta_mode = local->iw_mode == IW_MODE_MASTER || - local->iw_mode == IW_MODE_REPEAT || - local->iw_mode == IW_MODE_MONITOR; - - val = buf[0] | (buf[1] << 8); - if (!non_sta_mode || val != HFA384X_LINKSTATUS_DISCONNECTED) { - PDEBUG(DEBUG_EXTRA, "%s: LinkStatus=%d (%s)\n", - local->dev->name, val, hfa384x_linkstatus_str(val)); - } - - if (non_sta_mode) { - netif_carrier_on(local->dev); - netif_carrier_on(local->ddev); - return; - } - - /* Get current BSSID later in scheduled task */ - set_bit(PRISM2_INFO_PENDING_LINKSTATUS, &local->pending_info); - local->prev_link_status = val; - schedule_work(&local->info_queue); -} - - -static void prism2_host_roaming(local_info_t *local) -{ - struct hfa384x_join_request req; - struct net_device *dev = local->dev; - struct hfa384x_hostscan_result *selected, *entry; - int i; - unsigned long flags; - - if (local->last_join_time && - time_before(jiffies, local->last_join_time + 10 * HZ)) { - PDEBUG(DEBUG_EXTRA, "%s: last join request has not yet been " - "completed - waiting for it before issuing new one\n", - dev->name); - return; - } - - /* ScanResults are sorted: first ESS results in decreasing signal - * quality then IBSS results in similar order. - * Trivial roaming policy: just select the first entry. - * This could probably be improved by adding hysteresis to limit - * number of handoffs, etc. - * - * Could do periodic RID_SCANREQUEST or Inquire F101 to get new - * ScanResults */ - spin_lock_irqsave(&local->lock, flags); - if (local->last_scan_results == NULL || - local->last_scan_results_count == 0) { - spin_unlock_irqrestore(&local->lock, flags); - PDEBUG(DEBUG_EXTRA, "%s: no scan results for host roaming\n", - dev->name); - return; - } - - selected = &local->last_scan_results[0]; - - if (local->preferred_ap[0] || local->preferred_ap[1] || - local->preferred_ap[2] || local->preferred_ap[3] || - local->preferred_ap[4] || local->preferred_ap[5]) { - /* Try to find preferred AP */ - PDEBUG(DEBUG_EXTRA, "%s: Preferred AP BSSID %pM\n", - dev->name, local->preferred_ap); - for (i = 0; i < local->last_scan_results_count; i++) { - entry = &local->last_scan_results[i]; - if (memcmp(local->preferred_ap, entry->bssid, 6) == 0) - { - PDEBUG(DEBUG_EXTRA, "%s: using preferred AP " - "selection\n", dev->name); - selected = entry; - break; - } - } - } - - memcpy(req.bssid, selected->bssid, ETH_ALEN); - req.channel = selected->chid; - spin_unlock_irqrestore(&local->lock, flags); - - PDEBUG(DEBUG_EXTRA, "%s: JoinRequest: BSSID=%pM" - " channel=%d\n", - dev->name, req.bssid, le16_to_cpu(req.channel)); - if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req, - sizeof(req))) { - printk(KERN_DEBUG "%s: JoinRequest failed\n", dev->name); - } - local->last_join_time = jiffies; -} - - -static void hostap_report_scan_complete(local_info_t *local) -{ - union iwreq_data wrqu; - - /* Inform user space about new scan results (just empty event, - * SIOCGIWSCAN can be used to fetch data */ - wrqu.data.length = 0; - wrqu.data.flags = 0; - wireless_send_event(local->dev, SIOCGIWSCAN, &wrqu, NULL); - - /* Allow SIOCGIWSCAN handling to occur since we have received - * scanning result */ - local->scan_timestamp = 0; -} - - -/* Called only as a tasklet (software IRQ) */ -static void prism2_info_scanresults(local_info_t *local, unsigned char *buf, - int left) -{ - u16 *pos; - int new_count, i; - unsigned long flags; - struct hfa384x_scan_result *res; - struct hfa384x_hostscan_result *results, *prev; - - if (left < 4) { - printk(KERN_DEBUG "%s: invalid scanresult info frame " - "length %d\n", local->dev->name, left); - return; - } - - pos = (u16 *) buf; - pos++; - pos++; - left -= 4; - - new_count = left / sizeof(struct hfa384x_scan_result); - results = kmalloc_array(new_count, - sizeof(struct hfa384x_hostscan_result), - GFP_ATOMIC); - if (results == NULL) - return; - - /* Convert to hostscan result format. */ - res = (struct hfa384x_scan_result *) pos; - for (i = 0; i < new_count; i++) { - memcpy(&results[i], &res[i], - sizeof(struct hfa384x_scan_result)); - results[i].atim = 0; - } - - spin_lock_irqsave(&local->lock, flags); - local->last_scan_type = PRISM2_SCAN; - prev = local->last_scan_results; - local->last_scan_results = results; - local->last_scan_results_count = new_count; - spin_unlock_irqrestore(&local->lock, flags); - kfree(prev); - - hostap_report_scan_complete(local); - - /* Perform rest of ScanResults handling later in scheduled task */ - set_bit(PRISM2_INFO_PENDING_SCANRESULTS, &local->pending_info); - schedule_work(&local->info_queue); -} - - -/* Called only as a tasklet (software IRQ) */ -static void prism2_info_hostscanresults(local_info_t *local, - unsigned char *buf, int left) -{ - int i, result_size, copy_len, new_count; - struct hfa384x_hostscan_result *results, *prev; - unsigned long flags; - __le16 *pos; - u8 *ptr; - - wake_up_interruptible(&local->hostscan_wq); - - if (left < 4) { - printk(KERN_DEBUG "%s: invalid hostscanresult info frame " - "length %d\n", local->dev->name, left); - return; - } - - pos = (__le16 *) buf; - copy_len = result_size = le16_to_cpu(*pos); - if (result_size == 0) { - printk(KERN_DEBUG "%s: invalid result_size (0) in " - "hostscanresults\n", local->dev->name); - return; - } - if (copy_len > sizeof(struct hfa384x_hostscan_result)) - copy_len = sizeof(struct hfa384x_hostscan_result); - - pos++; - pos++; - left -= 4; - ptr = (u8 *) pos; - - new_count = left / result_size; - results = kcalloc(new_count, sizeof(struct hfa384x_hostscan_result), - GFP_ATOMIC); - if (results == NULL) - return; - - for (i = 0; i < new_count; i++) { - memcpy(&results[i], ptr, copy_len); - ptr += result_size; - left -= result_size; - } - - if (left) { - printk(KERN_DEBUG "%s: short HostScan result entry (%d/%d)\n", - local->dev->name, left, result_size); - } - - spin_lock_irqsave(&local->lock, flags); - local->last_scan_type = PRISM2_HOSTSCAN; - prev = local->last_scan_results; - local->last_scan_results = results; - local->last_scan_results_count = new_count; - spin_unlock_irqrestore(&local->lock, flags); - kfree(prev); - - hostap_report_scan_complete(local); -} -#endif /* PRISM2_NO_STATION_MODES */ - - -/* Called only as a tasklet (software IRQ) */ -void hostap_info_process(local_info_t *local, struct sk_buff *skb) -{ - struct hfa384x_info_frame *info; - unsigned char *buf; - int left; -#ifndef PRISM2_NO_DEBUG - int i; -#endif /* PRISM2_NO_DEBUG */ - - info = (struct hfa384x_info_frame *) skb->data; - buf = skb->data + sizeof(*info); - left = skb->len - sizeof(*info); - - switch (le16_to_cpu(info->type)) { - case HFA384X_INFO_COMMTALLIES: - prism2_info_commtallies(local, buf, left); - break; - -#ifndef PRISM2_NO_STATION_MODES - case HFA384X_INFO_LINKSTATUS: - prism2_info_linkstatus(local, buf, left); - break; - - case HFA384X_INFO_SCANRESULTS: - prism2_info_scanresults(local, buf, left); - break; - - case HFA384X_INFO_HOSTSCANRESULTS: - prism2_info_hostscanresults(local, buf, left); - break; -#endif /* PRISM2_NO_STATION_MODES */ - -#ifndef PRISM2_NO_DEBUG - default: - PDEBUG(DEBUG_EXTRA, "%s: INFO - len=%d type=0x%04x\n", - local->dev->name, le16_to_cpu(info->len), - le16_to_cpu(info->type)); - PDEBUG(DEBUG_EXTRA, "Unknown info frame:"); - for (i = 0; i < (left < 100 ? left : 100); i++) - PDEBUG2(DEBUG_EXTRA, " %02x", buf[i]); - PDEBUG2(DEBUG_EXTRA, "\n"); - break; -#endif /* PRISM2_NO_DEBUG */ - } -} - - -#ifndef PRISM2_NO_STATION_MODES -static void handle_info_queue_linkstatus(local_info_t *local) -{ - int val = local->prev_link_status; - int connected; - union iwreq_data wrqu; - - connected = - val == HFA384X_LINKSTATUS_CONNECTED || - val == HFA384X_LINKSTATUS_AP_CHANGE || - val == HFA384X_LINKSTATUS_AP_IN_RANGE; - - if (local->func->get_rid(local->dev, HFA384X_RID_CURRENTBSSID, - local->bssid, ETH_ALEN, 1) < 0) { - printk(KERN_DEBUG "%s: could not read CURRENTBSSID after " - "LinkStatus event\n", local->dev->name); - } else { - PDEBUG(DEBUG_EXTRA, "%s: LinkStatus: BSSID=%pM\n", - local->dev->name, - (unsigned char *) local->bssid); - if (local->wds_type & HOSTAP_WDS_AP_CLIENT) - hostap_add_sta(local->ap, local->bssid); - } - - /* Get BSSID if we have a valid AP address */ - if (connected) { - netif_carrier_on(local->dev); - netif_carrier_on(local->ddev); - memcpy(wrqu.ap_addr.sa_data, local->bssid, ETH_ALEN); - } else { - netif_carrier_off(local->dev); - netif_carrier_off(local->ddev); - eth_zero_addr(wrqu.ap_addr.sa_data); - } - wrqu.ap_addr.sa_family = ARPHRD_ETHER; - - /* - * Filter out sequential disconnect events in order not to cause a - * flood of SIOCGIWAP events that have a race condition with EAPOL - * frames and can confuse wpa_supplicant about the current association - * status. - */ - if (connected || local->prev_linkstatus_connected) - wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); - local->prev_linkstatus_connected = connected; -} - - -static void handle_info_queue_scanresults(local_info_t *local) -{ - if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA) - prism2_host_roaming(local); - - if (local->host_roaming == 2 && local->iw_mode == IW_MODE_INFRA && - !is_zero_ether_addr(local->preferred_ap)) { - /* - * Firmware seems to be getting into odd state in host_roaming - * mode 2 when hostscan is used without join command, so try - * to fix this by re-joining the current AP. This does not - * actually trigger a new association if the current AP is - * still in the scan results. - */ - prism2_host_roaming(local); - } -} - - -/* Called only as scheduled task after receiving info frames (used to avoid - * pending too much time in HW IRQ handler). */ -static void handle_info_queue(struct work_struct *work) -{ - local_info_t *local = container_of(work, local_info_t, info_queue); - - if (test_and_clear_bit(PRISM2_INFO_PENDING_LINKSTATUS, - &local->pending_info)) - handle_info_queue_linkstatus(local); - - if (test_and_clear_bit(PRISM2_INFO_PENDING_SCANRESULTS, - &local->pending_info)) - handle_info_queue_scanresults(local); -} -#endif /* PRISM2_NO_STATION_MODES */ - - -void hostap_info_init(local_info_t *local) -{ - skb_queue_head_init(&local->info_list); -#ifndef PRISM2_NO_STATION_MODES - INIT_WORK(&local->info_queue, handle_info_queue); -#endif /* PRISM2_NO_STATION_MODES */ -} - - -EXPORT_SYMBOL(hostap_info_init); -EXPORT_SYMBOL(hostap_info_process); diff --git a/drivers/net/wireless/intersil/hostap/hostap_ioctl.c b/drivers/net/wireless/intersil/hostap/hostap_ioctl.c deleted file mode 100644 index 26162f92e3..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_ioctl.c +++ /dev/null @@ -1,3847 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */ - -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/sched/signal.h> -#include <linux/ethtool.h> -#include <linux/if_arp.h> -#include <linux/module.h> -#include <linux/etherdevice.h> -#include <net/lib80211.h> - -#include "hostap_wlan.h" -#include "hostap.h" -#include "hostap_ap.h" - -static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - struct iw_statistics *wstats; - - iface = netdev_priv(dev); - local = iface->local; - - /* Why are we doing that ? Jean II */ - if (iface->type != HOSTAP_INTERFACE_MAIN) - return NULL; - - wstats = &local->wstats; - - wstats->status = 0; - wstats->discard.code = - local->comm_tallies.rx_discards_wep_undecryptable; - wstats->discard.misc = - local->comm_tallies.rx_fcs_errors + - local->comm_tallies.rx_discards_no_buffer + - local->comm_tallies.tx_discards_wrong_sa; - - wstats->discard.retries = - local->comm_tallies.tx_retry_limit_exceeded; - wstats->discard.fragment = - local->comm_tallies.rx_message_in_bad_msg_fragments; - - if (local->iw_mode != IW_MODE_MASTER && - local->iw_mode != IW_MODE_REPEAT) { - - if (prism2_update_comms_qual(dev) == 0) - wstats->qual.updated = IW_QUAL_ALL_UPDATED | - IW_QUAL_DBM; - - wstats->qual.qual = local->comms_qual; - wstats->qual.level = local->avg_signal; - wstats->qual.noise = local->avg_noise; - } else { - wstats->qual.qual = 0; - wstats->qual.level = 0; - wstats->qual.noise = 0; - wstats->qual.updated = IW_QUAL_ALL_INVALID; - } - - return wstats; -} - - -static int prism2_get_datarates(struct net_device *dev, u8 *rates) -{ - struct hostap_interface *iface; - local_info_t *local; - u8 buf[12]; - int len; - u16 val; - - iface = netdev_priv(dev); - local = iface->local; - - len = local->func->get_rid(dev, HFA384X_RID_SUPPORTEDDATARATES, buf, - sizeof(buf), 0); - if (len < 2) - return 0; - - val = le16_to_cpu(*(__le16 *) buf); /* string length */ - - if (len - 2 < val || val > 10) - return 0; - - memcpy(rates, buf + 2, val); - return val; -} - - -static int prism2_get_name(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - u8 rates[10]; - int len, i, over2 = 0; - - len = prism2_get_datarates(dev, rates); - - for (i = 0; i < len; i++) { - if (rates[i] == 0x0b || rates[i] == 0x16) { - over2 = 1; - break; - } - } - - strcpy(wrqu->name, over2 ? "IEEE 802.11b" : "IEEE 802.11-DS"); - - return 0; -} - - -static int prism2_ioctl_siwencode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *keybuf) -{ - struct iw_point *erq = &wrqu->encoding; - struct hostap_interface *iface; - local_info_t *local; - int i; - struct lib80211_crypt_data **crypt; - - iface = netdev_priv(dev); - local = iface->local; - - i = erq->flags & IW_ENCODE_INDEX; - if (i < 1 || i > 4) - i = local->crypt_info.tx_keyidx; - else - i--; - if (i < 0 || i >= WEP_KEYS) - return -EINVAL; - - crypt = &local->crypt_info.crypt[i]; - - if (erq->flags & IW_ENCODE_DISABLED) { - if (*crypt) - lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); - goto done; - } - - if (*crypt != NULL && (*crypt)->ops != NULL && - strcmp((*crypt)->ops->name, "WEP") != 0) { - /* changing to use WEP; deinit previously used algorithm */ - lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); - } - - if (*crypt == NULL) { - struct lib80211_crypt_data *new_crypt; - - /* take WEP into use */ - new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), - GFP_KERNEL); - if (new_crypt == NULL) - return -ENOMEM; - new_crypt->ops = lib80211_get_crypto_ops("WEP"); - if (!new_crypt->ops) { - request_module("lib80211_crypt_wep"); - new_crypt->ops = lib80211_get_crypto_ops("WEP"); - } - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) - new_crypt->priv = new_crypt->ops->init(i); - if (!new_crypt->ops || !new_crypt->priv) { - kfree(new_crypt); - new_crypt = NULL; - - printk(KERN_WARNING "%s: could not initialize WEP: " - "load module hostap_crypt_wep.o\n", - dev->name); - return -EOPNOTSUPP; - } - *crypt = new_crypt; - } - - if (erq->length > 0) { - int len = erq->length <= 5 ? 5 : 13; - int first = 1, j; - if (len > erq->length) - memset(keybuf + erq->length, 0, len - erq->length); - (*crypt)->ops->set_key(keybuf, len, NULL, (*crypt)->priv); - for (j = 0; j < WEP_KEYS; j++) { - if (j != i && local->crypt_info.crypt[j]) { - first = 0; - break; - } - } - if (first) - local->crypt_info.tx_keyidx = i; - } else { - /* No key data - just set the default TX key index */ - local->crypt_info.tx_keyidx = i; - } - - done: - local->open_wep = erq->flags & IW_ENCODE_OPEN; - - if (hostap_set_encryption(local)) { - printk(KERN_DEBUG "%s: set_encryption failed\n", dev->name); - return -EINVAL; - } - - /* Do not reset port0 if card is in Managed mode since resetting will - * generate new IEEE 802.11 authentication which may end up in looping - * with IEEE 802.1X. Prism2 documentation seem to require port reset - * after WEP configuration. However, keys are apparently changed at - * least in Managed mode. */ - if (local->iw_mode != IW_MODE_INFRA && local->func->reset_port(dev)) { - printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); - return -EINVAL; - } - - return 0; -} - - -static int prism2_ioctl_giwencode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *key) -{ - struct iw_point *erq = &wrqu->encoding; - struct hostap_interface *iface; - local_info_t *local; - int i, len; - u16 val; - struct lib80211_crypt_data *crypt; - - iface = netdev_priv(dev); - local = iface->local; - - i = erq->flags & IW_ENCODE_INDEX; - if (i < 1 || i > 4) - i = local->crypt_info.tx_keyidx; - else - i--; - if (i < 0 || i >= WEP_KEYS) - return -EINVAL; - - crypt = local->crypt_info.crypt[i]; - erq->flags = i + 1; - - if (crypt == NULL || crypt->ops == NULL) { - erq->length = 0; - erq->flags |= IW_ENCODE_DISABLED; - return 0; - } - - if (strcmp(crypt->ops->name, "WEP") != 0) { - /* only WEP is supported with wireless extensions, so just - * report that encryption is used */ - erq->length = 0; - erq->flags |= IW_ENCODE_ENABLED; - return 0; - } - - /* Reads from HFA384X_RID_CNFDEFAULTKEY* return bogus values, so show - * the keys from driver buffer */ - len = crypt->ops->get_key(key, WEP_KEY_LEN, NULL, crypt->priv); - erq->length = (len >= 0 ? len : 0); - - if (local->func->get_rid(dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, 1) < 0) - { - printk("CNFWEPFLAGS reading failed\n"); - return -EOPNOTSUPP; - } - le16_to_cpus(&val); - if (val & HFA384X_WEPFLAGS_PRIVACYINVOKED) - erq->flags |= IW_ENCODE_ENABLED; - else - erq->flags |= IW_ENCODE_DISABLED; - if (val & HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED) - erq->flags |= IW_ENCODE_RESTRICTED; - else - erq->flags |= IW_ENCODE_OPEN; - - return 0; -} - - -static int hostap_set_rate(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - int ret, basic_rates; - - iface = netdev_priv(dev); - local = iface->local; - - basic_rates = local->basic_rates & local->tx_rate_control; - if (!basic_rates || basic_rates != local->basic_rates) { - printk(KERN_INFO "%s: updating basic rate set automatically " - "to match with the new supported rate set\n", - dev->name); - if (!basic_rates) - basic_rates = local->tx_rate_control; - - local->basic_rates = basic_rates; - if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, - basic_rates)) - printk(KERN_WARNING "%s: failed to set " - "cnfBasicRates\n", dev->name); - } - - ret = (hostap_set_word(dev, HFA384X_RID_TXRATECONTROL, - local->tx_rate_control) || - hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES, - local->tx_rate_control) || - local->func->reset_port(dev)); - - if (ret) { - printk(KERN_WARNING "%s: TXRateControl/cnfSupportedRates " - "setting to 0x%x failed\n", - dev->name, local->tx_rate_control); - } - - /* Update TX rate configuration for all STAs based on new operational - * rate set. */ - hostap_update_rates(local); - - return ret; -} - - -static int prism2_ioctl_siwrate(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rrq = &wrqu->bitrate; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - if (rrq->fixed) { - switch (rrq->value) { - case 11000000: - local->tx_rate_control = HFA384X_RATES_11MBPS; - break; - case 5500000: - local->tx_rate_control = HFA384X_RATES_5MBPS; - break; - case 2000000: - local->tx_rate_control = HFA384X_RATES_2MBPS; - break; - case 1000000: - local->tx_rate_control = HFA384X_RATES_1MBPS; - break; - default: - local->tx_rate_control = HFA384X_RATES_1MBPS | - HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | - HFA384X_RATES_11MBPS; - break; - } - } else { - switch (rrq->value) { - case 11000000: - local->tx_rate_control = HFA384X_RATES_1MBPS | - HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | - HFA384X_RATES_11MBPS; - break; - case 5500000: - local->tx_rate_control = HFA384X_RATES_1MBPS | - HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS; - break; - case 2000000: - local->tx_rate_control = HFA384X_RATES_1MBPS | - HFA384X_RATES_2MBPS; - break; - case 1000000: - local->tx_rate_control = HFA384X_RATES_1MBPS; - break; - default: - local->tx_rate_control = HFA384X_RATES_1MBPS | - HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | - HFA384X_RATES_11MBPS; - break; - } - } - - return hostap_set_rate(dev); -} - - -static int prism2_ioctl_giwrate(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rrq = &wrqu->bitrate; - u16 val; - struct hostap_interface *iface; - local_info_t *local; - int ret = 0; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->get_rid(dev, HFA384X_RID_TXRATECONTROL, &val, 2, 1) < - 0) - return -EINVAL; - - if ((val & 0x1) && (val > 1)) - rrq->fixed = 0; - else - rrq->fixed = 1; - - if (local->iw_mode == IW_MODE_MASTER && local->ap != NULL && - !local->fw_tx_rate_control) { - /* HFA384X_RID_CURRENTTXRATE seems to always be 2 Mbps in - * Host AP mode, so use the recorded TX rate of the last sent - * frame */ - rrq->value = local->ap->last_tx_rate > 0 ? - local->ap->last_tx_rate * 100000 : 11000000; - return 0; - } - - if (local->func->get_rid(dev, HFA384X_RID_CURRENTTXRATE, &val, 2, 1) < - 0) - return -EINVAL; - - switch (val) { - case HFA384X_RATES_1MBPS: - rrq->value = 1000000; - break; - case HFA384X_RATES_2MBPS: - rrq->value = 2000000; - break; - case HFA384X_RATES_5MBPS: - rrq->value = 5500000; - break; - case HFA384X_RATES_11MBPS: - rrq->value = 11000000; - break; - default: - /* should not happen */ - rrq->value = 11000000; - ret = -EINVAL; - break; - } - - return ret; -} - - -static int prism2_ioctl_siwsens(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *sens = &wrqu->sens; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - /* Set the desired AP density */ - if (sens->value < 1 || sens->value > 3) - return -EINVAL; - - if (hostap_set_word(dev, HFA384X_RID_CNFSYSTEMSCALE, sens->value) || - local->func->reset_port(dev)) - return -EINVAL; - - return 0; -} - -static int prism2_ioctl_giwsens(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *sens = &wrqu->sens; - struct hostap_interface *iface; - local_info_t *local; - __le16 val; - - iface = netdev_priv(dev); - local = iface->local; - - /* Get the current AP density */ - if (local->func->get_rid(dev, HFA384X_RID_CNFSYSTEMSCALE, &val, 2, 1) < - 0) - return -EINVAL; - - sens->value = le16_to_cpu(val); - sens->fixed = 1; - - return 0; -} - - -/* Deprecated in new wireless extension API */ -static int prism2_ioctl_giwaplist(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_point *data = &wrqu->data; - struct hostap_interface *iface; - local_info_t *local; - struct sockaddr *addr; - struct iw_quality *qual; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->iw_mode != IW_MODE_MASTER) { - printk(KERN_DEBUG "SIOCGIWAPLIST is currently only supported " - "in Host AP mode\n"); - data->length = 0; - return -EOPNOTSUPP; - } - - addr = kmalloc_array(IW_MAX_AP, sizeof(struct sockaddr), GFP_KERNEL); - qual = kmalloc_array(IW_MAX_AP, sizeof(struct iw_quality), GFP_KERNEL); - if (addr == NULL || qual == NULL) { - kfree(addr); - kfree(qual); - data->length = 0; - return -ENOMEM; - } - - data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1); - - memcpy(extra, addr, sizeof(struct sockaddr) * data->length); - data->flags = 1; /* has quality information */ - memcpy(extra + sizeof(struct sockaddr) * data->length, qual, - sizeof(struct iw_quality) * data->length); - - kfree(addr); - kfree(qual); - return 0; -} - - -static int prism2_ioctl_siwrts(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rts = &wrqu->rts; - struct hostap_interface *iface; - local_info_t *local; - __le16 val; - - iface = netdev_priv(dev); - local = iface->local; - - if (rts->disabled) - val = cpu_to_le16(2347); - else if (rts->value < 0 || rts->value > 2347) - return -EINVAL; - else - val = cpu_to_le16(rts->value); - - if (local->func->set_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2) || - local->func->reset_port(dev)) - return -EINVAL; - - local->rts_threshold = rts->value; - - return 0; -} - -static int prism2_ioctl_giwrts(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rts = &wrqu->rts; - struct hostap_interface *iface; - local_info_t *local; - __le16 val; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->get_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2, 1) < - 0) - return -EINVAL; - - rts->value = le16_to_cpu(val); - rts->disabled = (rts->value == 2347); - rts->fixed = 1; - - return 0; -} - - -static int prism2_ioctl_siwfrag(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rts = &wrqu->rts; - struct hostap_interface *iface; - local_info_t *local; - __le16 val; - - iface = netdev_priv(dev); - local = iface->local; - - if (rts->disabled) - val = cpu_to_le16(2346); - else if (rts->value < 256 || rts->value > 2346) - return -EINVAL; - else - val = cpu_to_le16(rts->value & ~0x1); /* even numbers only */ - - local->fragm_threshold = rts->value & ~0x1; - if (local->func->set_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, &val, - 2) - || local->func->reset_port(dev)) - return -EINVAL; - - return 0; -} - -static int prism2_ioctl_giwfrag(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rts = &wrqu->rts; - struct hostap_interface *iface; - local_info_t *local; - __le16 val; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->get_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, - &val, 2, 1) < 0) - return -EINVAL; - - rts->value = le16_to_cpu(val); - rts->disabled = (rts->value == 2346); - rts->fixed = 1; - - return 0; -} - - -#ifndef PRISM2_NO_STATION_MODES -static int hostap_join_ap(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - struct hfa384x_join_request req; - unsigned long flags; - int i; - struct hfa384x_hostscan_result *entry; - - iface = netdev_priv(dev); - local = iface->local; - - memcpy(req.bssid, local->preferred_ap, ETH_ALEN); - req.channel = 0; - - spin_lock_irqsave(&local->lock, flags); - for (i = 0; i < local->last_scan_results_count; i++) { - if (!local->last_scan_results) - break; - entry = &local->last_scan_results[i]; - if (ether_addr_equal(local->preferred_ap, entry->bssid)) { - req.channel = entry->chid; - break; - } - } - spin_unlock_irqrestore(&local->lock, flags); - - if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req, - sizeof(req))) { - printk(KERN_DEBUG "%s: JoinRequest %pM failed\n", - dev->name, local->preferred_ap); - return -1; - } - - printk(KERN_DEBUG "%s: Trying to join BSSID %pM\n", - dev->name, local->preferred_ap); - - return 0; -} -#endif /* PRISM2_NO_STATION_MODES */ - - -static int prism2_ioctl_siwap(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct sockaddr *ap_addr = &wrqu->ap_addr; -#ifdef PRISM2_NO_STATION_MODES - return -EOPNOTSUPP; -#else /* PRISM2_NO_STATION_MODES */ - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - memcpy(local->preferred_ap, &ap_addr->sa_data, ETH_ALEN); - - if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA) { - struct hfa384x_scan_request scan_req; - memset(&scan_req, 0, sizeof(scan_req)); - scan_req.channel_list = cpu_to_le16(0x3fff); - scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); - if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, - &scan_req, sizeof(scan_req))) { - printk(KERN_DEBUG "%s: ScanResults request failed - " - "preferred AP delayed to next unsolicited " - "scan\n", dev->name); - } - } else if (local->host_roaming == 2 && - local->iw_mode == IW_MODE_INFRA) { - if (hostap_join_ap(dev)) - return -EINVAL; - } else { - printk(KERN_DEBUG "%s: Preferred AP (SIOCSIWAP) is used only " - "in Managed mode when host_roaming is enabled\n", - dev->name); - } - - return 0; -#endif /* PRISM2_NO_STATION_MODES */ -} - -static int prism2_ioctl_giwap(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct sockaddr *ap_addr = &wrqu->ap_addr; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - ap_addr->sa_family = ARPHRD_ETHER; - switch (iface->type) { - case HOSTAP_INTERFACE_AP: - memcpy(&ap_addr->sa_data, dev->dev_addr, ETH_ALEN); - break; - case HOSTAP_INTERFACE_STA: - memcpy(&ap_addr->sa_data, local->assoc_ap_addr, ETH_ALEN); - break; - case HOSTAP_INTERFACE_WDS: - memcpy(&ap_addr->sa_data, iface->u.wds.remote_addr, ETH_ALEN); - break; - default: - if (local->func->get_rid(dev, HFA384X_RID_CURRENTBSSID, - &ap_addr->sa_data, ETH_ALEN, 1) < 0) - return -EOPNOTSUPP; - - /* local->bssid is also updated in LinkStatus handler when in - * station mode */ - memcpy(local->bssid, &ap_addr->sa_data, ETH_ALEN); - break; - } - - return 0; -} - - -static int prism2_ioctl_siwnickn(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *nickname) -{ - struct iw_point *data = &wrqu->data; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - memset(local->name, 0, sizeof(local->name)); - memcpy(local->name, nickname, data->length); - local->name_set = 1; - - if (hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, local->name) || - local->func->reset_port(dev)) - return -EINVAL; - - return 0; -} - -static int prism2_ioctl_giwnickn(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *nickname) -{ - struct iw_point *data = &wrqu->data; - struct hostap_interface *iface; - local_info_t *local; - int len; - char name[MAX_NAME_LEN + 3]; - u16 val; - - iface = netdev_priv(dev); - local = iface->local; - - len = local->func->get_rid(dev, HFA384X_RID_CNFOWNNAME, - &name, MAX_NAME_LEN + 2, 0); - val = le16_to_cpu(*(__le16 *) name); - if (len > MAX_NAME_LEN + 2 || len < 0 || val > MAX_NAME_LEN) - return -EOPNOTSUPP; - - name[val + 2] = '\0'; - data->length = val + 1; - memcpy(nickname, name + 2, val + 1); - - return 0; -} - - -static int prism2_ioctl_siwfreq(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_freq *freq = &wrqu->freq; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - /* freq => chan. */ - if (freq->e == 1 && - freq->m / 100000 >= freq_list[0] && - freq->m / 100000 <= freq_list[FREQ_COUNT - 1]) { - int ch; - int fr = freq->m / 100000; - for (ch = 0; ch < FREQ_COUNT; ch++) { - if (fr == freq_list[ch]) { - freq->e = 0; - freq->m = ch + 1; - break; - } - } - } - - if (freq->e != 0 || freq->m < 1 || freq->m > FREQ_COUNT || - !(local->channel_mask & (1 << (freq->m - 1)))) - return -EINVAL; - - local->channel = freq->m; /* channel is used in prism2_setup_rids() */ - if (hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel) || - local->func->reset_port(dev)) - return -EINVAL; - - return 0; -} - -static int prism2_ioctl_giwfreq(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_freq *freq = &wrqu->freq; - struct hostap_interface *iface; - local_info_t *local; - u16 val; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->get_rid(dev, HFA384X_RID_CURRENTCHANNEL, &val, 2, 1) < - 0) - return -EINVAL; - - le16_to_cpus(&val); - if (val < 1 || val > FREQ_COUNT) - return -EINVAL; - - freq->m = freq_list[val - 1] * 100000; - freq->e = 1; - - return 0; -} - - -static void hostap_monitor_set_type(local_info_t *local) -{ - struct net_device *dev = local->ddev; - - if (dev == NULL) - return; - - if (local->monitor_type == PRISM2_MONITOR_PRISM || - local->monitor_type == PRISM2_MONITOR_CAPHDR) { - dev->type = ARPHRD_IEEE80211_PRISM; - } else if (local->monitor_type == PRISM2_MONITOR_RADIOTAP) { - dev->type = ARPHRD_IEEE80211_RADIOTAP; - } else { - dev->type = ARPHRD_IEEE80211; - } -} - - -static int prism2_ioctl_siwessid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *ssid) -{ - struct iw_point *data = &wrqu->data; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - if (iface->type == HOSTAP_INTERFACE_WDS) - return -EOPNOTSUPP; - - if (data->flags == 0) - ssid[0] = '\0'; /* ANY */ - - if (local->iw_mode == IW_MODE_MASTER && ssid[0] == '\0') { - /* Setting SSID to empty string seems to kill the card in - * Host AP mode */ - printk(KERN_DEBUG "%s: Host AP mode does not support " - "'Any' essid\n", dev->name); - return -EINVAL; - } - - memcpy(local->essid, ssid, data->length); - local->essid[data->length] = '\0'; - - if ((!local->fw_ap && - hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, local->essid)) - || hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, local->essid) || - local->func->reset_port(dev)) - return -EINVAL; - - return 0; -} - -static int prism2_ioctl_giwessid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *essid) -{ - struct iw_point *data = &wrqu->data; - struct hostap_interface *iface; - local_info_t *local; - u16 val; - - iface = netdev_priv(dev); - local = iface->local; - - if (iface->type == HOSTAP_INTERFACE_WDS) - return -EOPNOTSUPP; - - data->flags = 1; /* active */ - if (local->iw_mode == IW_MODE_MASTER) { - data->length = strlen(local->essid); - memcpy(essid, local->essid, IW_ESSID_MAX_SIZE); - } else { - int len; - char ssid[MAX_SSID_LEN + 2]; - memset(ssid, 0, sizeof(ssid)); - len = local->func->get_rid(dev, HFA384X_RID_CURRENTSSID, - &ssid, MAX_SSID_LEN + 2, 0); - val = le16_to_cpu(*(__le16 *) ssid); - if (len > MAX_SSID_LEN + 2 || len < 0 || val > MAX_SSID_LEN) { - return -EOPNOTSUPP; - } - data->length = val; - memcpy(essid, ssid + 2, IW_ESSID_MAX_SIZE); - } - - return 0; -} - - -static int prism2_ioctl_giwrange(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_point *data = &wrqu->data; - struct hostap_interface *iface; - local_info_t *local; - struct iw_range *range = (struct iw_range *) extra; - u8 rates[10]; - u16 val; - int i, len, over2; - - iface = netdev_priv(dev); - local = iface->local; - - data->length = sizeof(struct iw_range); - memset(range, 0, sizeof(struct iw_range)); - - /* TODO: could fill num_txpower and txpower array with - * something; however, there are 128 different values.. */ - - range->txpower_capa = IW_TXPOW_DBM; - - if (local->iw_mode == IW_MODE_INFRA || local->iw_mode == IW_MODE_ADHOC) - { - range->min_pmp = 1 * 1024; - range->max_pmp = 65535 * 1024; - range->min_pmt = 1 * 1024; - range->max_pmt = 1000 * 1024; - range->pmp_flags = IW_POWER_PERIOD; - range->pmt_flags = IW_POWER_TIMEOUT; - range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | - IW_POWER_UNICAST_R | IW_POWER_ALL_R; - } - - range->we_version_compiled = WIRELESS_EXT; - range->we_version_source = 18; - - range->retry_capa = IW_RETRY_LIMIT; - range->retry_flags = IW_RETRY_LIMIT; - range->min_retry = 0; - range->max_retry = 255; - - range->num_channels = FREQ_COUNT; - - val = 0; - for (i = 0; i < FREQ_COUNT; i++) { - if (local->channel_mask & (1 << i)) { - range->freq[val].i = i + 1; - range->freq[val].m = freq_list[i] * 100000; - range->freq[val].e = 1; - val++; - } - if (val == IW_MAX_FREQUENCIES) - break; - } - range->num_frequency = val; - - if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { - range->max_qual.qual = 70; /* what is correct max? This was not - * documented exactly. At least - * 69 has been observed. */ - range->max_qual.level = 0; /* dB */ - range->max_qual.noise = 0; /* dB */ - - /* What would be suitable values for "average/typical" qual? */ - range->avg_qual.qual = 20; - range->avg_qual.level = -60; - range->avg_qual.noise = -95; - } else { - range->max_qual.qual = 92; /* 0 .. 92 */ - range->max_qual.level = 154; /* 27 .. 154 */ - range->max_qual.noise = 154; /* 27 .. 154 */ - } - range->sensitivity = 3; - - range->max_encoding_tokens = WEP_KEYS; - range->num_encoding_sizes = 2; - range->encoding_size[0] = 5; - range->encoding_size[1] = 13; - - over2 = 0; - len = prism2_get_datarates(dev, rates); - range->num_bitrates = 0; - for (i = 0; i < len; i++) { - if (range->num_bitrates < IW_MAX_BITRATES) { - range->bitrate[range->num_bitrates] = - rates[i] * 500000; - range->num_bitrates++; - } - if (rates[i] == 0x0b || rates[i] == 0x16) - over2 = 1; - } - /* estimated maximum TCP throughput values (bps) */ - range->throughput = over2 ? 5500000 : 1500000; - - range->min_rts = 0; - range->max_rts = 2347; - range->min_frag = 256; - range->max_frag = 2346; - - /* Event capability (kernel + driver) */ - range->event_capa[0] = (IW_EVENT_CAPA_K_0 | - IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | - IW_EVENT_CAPA_MASK(SIOCGIWAP) | - IW_EVENT_CAPA_MASK(SIOCGIWSCAN)); - range->event_capa[1] = IW_EVENT_CAPA_K_1; - range->event_capa[4] = (IW_EVENT_CAPA_MASK(IWEVTXDROP) | - IW_EVENT_CAPA_MASK(IWEVCUSTOM) | - IW_EVENT_CAPA_MASK(IWEVREGISTERED) | - IW_EVENT_CAPA_MASK(IWEVEXPIRED)); - - range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | - IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP; - - if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) - range->scan_capa = IW_SCAN_CAPA_ESSID; - - return 0; -} - - -static int hostap_monitor_mode_enable(local_info_t *local) -{ - struct net_device *dev = local->dev; - - printk(KERN_DEBUG "Enabling monitor mode\n"); - hostap_monitor_set_type(local); - - if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, - HFA384X_PORTTYPE_PSEUDO_IBSS)) { - printk(KERN_DEBUG "Port type setting for monitor mode " - "failed\n"); - return -EOPNOTSUPP; - } - - /* Host decrypt is needed to get the IV and ICV fields; - * however, monitor mode seems to remove WEP flag from frame - * control field */ - if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, - HFA384X_WEPFLAGS_HOSTENCRYPT | - HFA384X_WEPFLAGS_HOSTDECRYPT)) { - printk(KERN_DEBUG "WEP flags setting failed\n"); - return -EOPNOTSUPP; - } - - if (local->func->reset_port(dev) || - local->func->cmd(dev, HFA384X_CMDCODE_TEST | - (HFA384X_TEST_MONITOR << 8), - 0, NULL, NULL)) { - printk(KERN_DEBUG "Setting monitor mode failed\n"); - return -EOPNOTSUPP; - } - - return 0; -} - - -static int hostap_monitor_mode_disable(local_info_t *local) -{ - struct net_device *dev = local->ddev; - - if (dev == NULL) - return -1; - - printk(KERN_DEBUG "%s: Disabling monitor mode\n", dev->name); - dev->type = ARPHRD_ETHER; - - if (local->func->cmd(dev, HFA384X_CMDCODE_TEST | - (HFA384X_TEST_STOP << 8), - 0, NULL, NULL)) - return -1; - return hostap_set_encryption(local); -} - - -static int prism2_ioctl_siwmode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - __u32 *mode = &wrqu->mode; - struct hostap_interface *iface; - local_info_t *local; - int double_reset = 0; - - iface = netdev_priv(dev); - local = iface->local; - - if (*mode != IW_MODE_ADHOC && *mode != IW_MODE_INFRA && - *mode != IW_MODE_MASTER && *mode != IW_MODE_REPEAT && - *mode != IW_MODE_MONITOR) - return -EOPNOTSUPP; - -#ifdef PRISM2_NO_STATION_MODES - if (*mode == IW_MODE_ADHOC || *mode == IW_MODE_INFRA) - return -EOPNOTSUPP; -#endif /* PRISM2_NO_STATION_MODES */ - - if (*mode == local->iw_mode) - return 0; - - if (*mode == IW_MODE_MASTER && local->essid[0] == '\0') { - printk(KERN_WARNING "%s: empty SSID not allowed in Master " - "mode\n", dev->name); - return -EINVAL; - } - - if (local->iw_mode == IW_MODE_MONITOR) - hostap_monitor_mode_disable(local); - - if ((local->iw_mode == IW_MODE_ADHOC || - local->iw_mode == IW_MODE_MONITOR) && *mode == IW_MODE_MASTER) { - /* There seems to be a firmware bug in at least STA f/w v1.5.6 - * that leaves beacon frames to use IBSS type when moving from - * IBSS to Host AP mode. Doing double Port0 reset seems to be - * enough to workaround this. */ - double_reset = 1; - } - - printk(KERN_DEBUG "prism2: %s: operating mode changed " - "%d -> %d\n", dev->name, local->iw_mode, *mode); - local->iw_mode = *mode; - - if (local->iw_mode == IW_MODE_MONITOR) - hostap_monitor_mode_enable(local); - else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && - !local->fw_encrypt_ok) { - printk(KERN_DEBUG "%s: defaulting to host-based encryption as " - "a workaround for firmware bug in Host AP mode WEP\n", - dev->name); - local->host_encrypt = 1; - } - - if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, - hostap_get_porttype(local))) - return -EOPNOTSUPP; - - if (local->func->reset_port(dev)) - return -EINVAL; - if (double_reset && local->func->reset_port(dev)) - return -EINVAL; - - if (local->iw_mode != IW_MODE_INFRA && local->iw_mode != IW_MODE_ADHOC) - { - /* netif_carrier is used only in client modes for now, so make - * sure carrier is on when moving to non-client modes. */ - netif_carrier_on(local->dev); - netif_carrier_on(local->ddev); - } - return 0; -} - - -static int prism2_ioctl_giwmode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - __u32 *mode = &wrqu->mode; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - switch (iface->type) { - case HOSTAP_INTERFACE_STA: - *mode = IW_MODE_INFRA; - break; - case HOSTAP_INTERFACE_WDS: - *mode = IW_MODE_REPEAT; - break; - default: - *mode = local->iw_mode; - break; - } - return 0; -} - - -static int prism2_ioctl_siwpower(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *wrq = &wrqu->power; -#ifdef PRISM2_NO_STATION_MODES - return -EOPNOTSUPP; -#else /* PRISM2_NO_STATION_MODES */ - int ret = 0; - - if (wrq->disabled) - return hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 0); - - switch (wrq->flags & IW_POWER_MODE) { - case IW_POWER_UNICAST_R: - ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 0); - if (ret) - return ret; - ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); - if (ret) - return ret; - break; - case IW_POWER_ALL_R: - ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 1); - if (ret) - return ret; - ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); - if (ret) - return ret; - break; - case IW_POWER_ON: - break; - default: - return -EINVAL; - } - - if (wrq->flags & IW_POWER_TIMEOUT) { - ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); - if (ret) - return ret; - ret = hostap_set_word(dev, HFA384X_RID_CNFPMHOLDOVERDURATION, - wrq->value / 1024); - if (ret) - return ret; - } - if (wrq->flags & IW_POWER_PERIOD) { - ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); - if (ret) - return ret; - ret = hostap_set_word(dev, HFA384X_RID_CNFMAXSLEEPDURATION, - wrq->value / 1024); - if (ret) - return ret; - } - - return ret; -#endif /* PRISM2_NO_STATION_MODES */ -} - - -static int prism2_ioctl_giwpower(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rrq = &wrqu->power; -#ifdef PRISM2_NO_STATION_MODES - return -EOPNOTSUPP; -#else /* PRISM2_NO_STATION_MODES */ - struct hostap_interface *iface; - local_info_t *local; - __le16 enable, mcast; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->get_rid(dev, HFA384X_RID_CNFPMENABLED, &enable, 2, 1) - < 0) - return -EINVAL; - - if (!le16_to_cpu(enable)) { - rrq->disabled = 1; - return 0; - } - - rrq->disabled = 0; - - if ((rrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { - __le16 timeout; - if (local->func->get_rid(dev, - HFA384X_RID_CNFPMHOLDOVERDURATION, - &timeout, 2, 1) < 0) - return -EINVAL; - - rrq->flags = IW_POWER_TIMEOUT; - rrq->value = le16_to_cpu(timeout) * 1024; - } else { - __le16 period; - if (local->func->get_rid(dev, HFA384X_RID_CNFMAXSLEEPDURATION, - &period, 2, 1) < 0) - return -EINVAL; - - rrq->flags = IW_POWER_PERIOD; - rrq->value = le16_to_cpu(period) * 1024; - } - - if (local->func->get_rid(dev, HFA384X_RID_CNFMULTICASTRECEIVE, &mcast, - 2, 1) < 0) - return -EINVAL; - - if (le16_to_cpu(mcast)) - rrq->flags |= IW_POWER_ALL_R; - else - rrq->flags |= IW_POWER_UNICAST_R; - - return 0; -#endif /* PRISM2_NO_STATION_MODES */ -} - - -static int prism2_ioctl_siwretry(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rrq = &wrqu->retry; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - if (rrq->disabled) - return -EINVAL; - - /* setting retry limits is not supported with the current station - * firmware code; simulate this with alternative retry count for now */ - if (rrq->flags == IW_RETRY_LIMIT) { - if (rrq->value < 0) { - /* disable manual retry count setting and use firmware - * defaults */ - local->manual_retry_count = -1; - local->tx_control &= ~HFA384X_TX_CTRL_ALT_RTRY; - } else { - if (hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT, - rrq->value)) { - printk(KERN_DEBUG "%s: Alternate retry count " - "setting to %d failed\n", - dev->name, rrq->value); - return -EOPNOTSUPP; - } - - local->manual_retry_count = rrq->value; - local->tx_control |= HFA384X_TX_CTRL_ALT_RTRY; - } - return 0; - } - - return -EOPNOTSUPP; - -#if 0 - /* what could be done, if firmware would support this.. */ - - if (rrq->flags & IW_RETRY_LIMIT) { - if (rrq->flags & IW_RETRY_LONG) - HFA384X_RID_LONGRETRYLIMIT = rrq->value; - else if (rrq->flags & IW_RETRY_SHORT) - HFA384X_RID_SHORTRETRYLIMIT = rrq->value; - else { - HFA384X_RID_LONGRETRYLIMIT = rrq->value; - HFA384X_RID_SHORTRETRYLIMIT = rrq->value; - } - - } - - if (rrq->flags & IW_RETRY_LIFETIME) { - HFA384X_RID_MAXTRANSMITLIFETIME = rrq->value / 1024; - } - - return 0; -#endif /* 0 */ -} - -static int prism2_ioctl_giwretry(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rrq = &wrqu->retry; - struct hostap_interface *iface; - local_info_t *local; - __le16 shortretry, longretry, lifetime, altretry; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->get_rid(dev, HFA384X_RID_SHORTRETRYLIMIT, &shortretry, - 2, 1) < 0 || - local->func->get_rid(dev, HFA384X_RID_LONGRETRYLIMIT, &longretry, - 2, 1) < 0 || - local->func->get_rid(dev, HFA384X_RID_MAXTRANSMITLIFETIME, - &lifetime, 2, 1) < 0) - return -EINVAL; - - rrq->disabled = 0; - - if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { - rrq->flags = IW_RETRY_LIFETIME; - rrq->value = le16_to_cpu(lifetime) * 1024; - } else { - if (local->manual_retry_count >= 0) { - rrq->flags = IW_RETRY_LIMIT; - if (local->func->get_rid(dev, - HFA384X_RID_CNFALTRETRYCOUNT, - &altretry, 2, 1) >= 0) - rrq->value = le16_to_cpu(altretry); - else - rrq->value = local->manual_retry_count; - } else if ((rrq->flags & IW_RETRY_LONG)) { - rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; - rrq->value = le16_to_cpu(longretry); - } else { - rrq->flags = IW_RETRY_LIMIT; - rrq->value = le16_to_cpu(shortretry); - if (shortretry != longretry) - rrq->flags |= IW_RETRY_SHORT; - } - } - return 0; -} - - -/* Note! This TX power controlling is experimental and should not be used in - * production use. It just sets raw power register and does not use any kind of - * feedback information from the measured TX power (CR58). This is now - * commented out to make sure that it is not used by accident. TX power - * configuration will be enabled again after proper algorithm using feedback - * has been implemented. */ - -#ifdef RAW_TXPOWER_SETTING -/* Map HFA386x's CR31 to and from dBm with some sort of ad hoc mapping.. - * This version assumes following mapping: - * CR31 is 7-bit value with -64 to +63 range. - * -64 is mapped into +20dBm and +63 into -43dBm. - * This is certainly not an exact mapping for every card, but at least - * increasing dBm value should correspond to increasing TX power. - */ - -static int prism2_txpower_hfa386x_to_dBm(u16 val) -{ - signed char tmp; - - if (val > 255) - val = 255; - - tmp = val; - tmp >>= 2; - - return -12 - tmp; -} - -static u16 prism2_txpower_dBm_to_hfa386x(int val) -{ - signed char tmp; - - if (val > 20) - return 128; - else if (val < -43) - return 127; - - tmp = val; - tmp = -12 - tmp; - tmp <<= 2; - - return (unsigned char) tmp; -} -#endif /* RAW_TXPOWER_SETTING */ - - -static int prism2_ioctl_siwtxpow(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *rrq = &wrqu->txpower; - struct hostap_interface *iface; - local_info_t *local; -#ifdef RAW_TXPOWER_SETTING - char *tmp; -#endif - u16 val; - int ret = 0; - - iface = netdev_priv(dev); - local = iface->local; - - if (rrq->disabled) { - if (local->txpower_type != PRISM2_TXPOWER_OFF) { - val = 0xff; /* use all standby and sleep modes */ - ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, - HFA386X_CR_A_D_TEST_MODES2, - &val, NULL); - printk(KERN_DEBUG "%s: Turning radio off: %s\n", - dev->name, ret ? "failed" : "OK"); - local->txpower_type = PRISM2_TXPOWER_OFF; - } - return (ret ? -EOPNOTSUPP : 0); - } - - if (local->txpower_type == PRISM2_TXPOWER_OFF) { - val = 0; /* disable all standby and sleep modes */ - ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, - HFA386X_CR_A_D_TEST_MODES2, &val, NULL); - printk(KERN_DEBUG "%s: Turning radio on: %s\n", - dev->name, ret ? "failed" : "OK"); - local->txpower_type = PRISM2_TXPOWER_UNKNOWN; - } - -#ifdef RAW_TXPOWER_SETTING - if (!rrq->fixed && local->txpower_type != PRISM2_TXPOWER_AUTO) { - printk(KERN_DEBUG "Setting ALC on\n"); - val = HFA384X_TEST_CFG_BIT_ALC; - local->func->cmd(dev, HFA384X_CMDCODE_TEST | - (HFA384X_TEST_CFG_BITS << 8), 1, &val, NULL); - local->txpower_type = PRISM2_TXPOWER_AUTO; - return 0; - } - - if (local->txpower_type != PRISM2_TXPOWER_FIXED) { - printk(KERN_DEBUG "Setting ALC off\n"); - val = HFA384X_TEST_CFG_BIT_ALC; - local->func->cmd(dev, HFA384X_CMDCODE_TEST | - (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL); - local->txpower_type = PRISM2_TXPOWER_FIXED; - } - - if (rrq->flags == IW_TXPOW_DBM) - tmp = "dBm"; - else if (rrq->flags == IW_TXPOW_MWATT) - tmp = "mW"; - else - tmp = "UNKNOWN"; - printk(KERN_DEBUG "Setting TX power to %d %s\n", rrq->value, tmp); - - if (rrq->flags != IW_TXPOW_DBM) { - printk("SIOCSIWTXPOW with mW is not supported; use dBm\n"); - return -EOPNOTSUPP; - } - - local->txpower = rrq->value; - val = prism2_txpower_dBm_to_hfa386x(local->txpower); - if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, - HFA386X_CR_MANUAL_TX_POWER, &val, NULL)) - ret = -EOPNOTSUPP; -#else /* RAW_TXPOWER_SETTING */ - if (rrq->fixed) - ret = -EOPNOTSUPP; -#endif /* RAW_TXPOWER_SETTING */ - - return ret; -} - -static int prism2_ioctl_giwtxpow(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ -#ifdef RAW_TXPOWER_SETTING - struct iw_param *rrq = &wrqu->txpower; - struct hostap_interface *iface; - local_info_t *local; - u16 resp0; - - iface = netdev_priv(dev); - local = iface->local; - - rrq->flags = IW_TXPOW_DBM; - rrq->disabled = 0; - rrq->fixed = 0; - - if (local->txpower_type == PRISM2_TXPOWER_AUTO) { - if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, - HFA386X_CR_MANUAL_TX_POWER, - NULL, &resp0) == 0) { - rrq->value = prism2_txpower_hfa386x_to_dBm(resp0); - } else { - /* Could not get real txpower; guess 15 dBm */ - rrq->value = 15; - } - } else if (local->txpower_type == PRISM2_TXPOWER_OFF) { - rrq->value = 0; - rrq->disabled = 1; - } else if (local->txpower_type == PRISM2_TXPOWER_FIXED) { - rrq->value = local->txpower; - rrq->fixed = 1; - } else { - printk("SIOCGIWTXPOW - unknown txpower_type=%d\n", - local->txpower_type); - } - return 0; -#else /* RAW_TXPOWER_SETTING */ - return -EOPNOTSUPP; -#endif /* RAW_TXPOWER_SETTING */ -} - - -#ifndef PRISM2_NO_STATION_MODES - -/* HostScan request works with and without host_roaming mode. In addition, it - * does not break current association. However, it requires newer station - * firmware version (>= 1.3.1) than scan request. */ -static int prism2_request_hostscan(struct net_device *dev, - u8 *ssid, u8 ssid_len) -{ - struct hostap_interface *iface; - local_info_t *local; - struct hfa384x_hostscan_request scan_req; - - iface = netdev_priv(dev); - local = iface->local; - - memset(&scan_req, 0, sizeof(scan_req)); - scan_req.channel_list = cpu_to_le16(local->channel_mask & - local->scan_channel_mask); - scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); - if (ssid) { - if (ssid_len > 32) - return -EINVAL; - scan_req.target_ssid_len = cpu_to_le16(ssid_len); - memcpy(scan_req.target_ssid, ssid, ssid_len); - } - - if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, - sizeof(scan_req))) { - printk(KERN_DEBUG "%s: HOSTSCAN failed\n", dev->name); - return -EINVAL; - } - return 0; -} - - -static int prism2_request_scan(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - struct hfa384x_scan_request scan_req; - int ret = 0; - - iface = netdev_priv(dev); - local = iface->local; - - memset(&scan_req, 0, sizeof(scan_req)); - scan_req.channel_list = cpu_to_le16(local->channel_mask & - local->scan_channel_mask); - scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); - - /* FIX: - * It seems to be enough to set roaming mode for a short moment to - * host-based and then setup scanrequest data and return the mode to - * firmware-based. - * - * Master mode would need to drop to Managed mode for a short while - * to make scanning work.. Or sweep through the different channels and - * use passive scan based on beacons. */ - - if (!local->host_roaming) - hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, - HFA384X_ROAMING_HOST); - - if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, &scan_req, - sizeof(scan_req))) { - printk(KERN_DEBUG "SCANREQUEST failed\n"); - ret = -EINVAL; - } - - if (!local->host_roaming) - hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, - HFA384X_ROAMING_FIRMWARE); - - return ret; -} - -#else /* !PRISM2_NO_STATION_MODES */ - -static inline int prism2_request_hostscan(struct net_device *dev, - u8 *ssid, u8 ssid_len) -{ - return -EOPNOTSUPP; -} - - -static inline int prism2_request_scan(struct net_device *dev) -{ - return -EOPNOTSUPP; -} - -#endif /* !PRISM2_NO_STATION_MODES */ - - -static int prism2_ioctl_siwscan(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_point *data = &wrqu->data; - struct hostap_interface *iface; - local_info_t *local; - int ret; - u8 *ssid = NULL, ssid_len = 0; - struct iw_scan_req *req = (struct iw_scan_req *) extra; - - iface = netdev_priv(dev); - local = iface->local; - - if (data->length < sizeof(struct iw_scan_req)) - req = NULL; - - if (local->iw_mode == IW_MODE_MASTER) { - /* In master mode, we just return the results of our local - * tables, so we don't need to start anything... - * Jean II */ - data->length = 0; - return 0; - } - - if (!local->dev_enabled) - return -ENETDOWN; - - if (req && data->flags & IW_SCAN_THIS_ESSID) { - ssid = req->essid; - ssid_len = req->essid_len; - - if (ssid_len && - ((local->iw_mode != IW_MODE_INFRA && - local->iw_mode != IW_MODE_ADHOC) || - (local->sta_fw_ver < PRISM2_FW_VER(1,3,1)))) - return -EOPNOTSUPP; - } - - if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) - ret = prism2_request_hostscan(dev, ssid, ssid_len); - else - ret = prism2_request_scan(dev); - - if (ret == 0) - local->scan_timestamp = jiffies; - - /* Could inquire F101, F103 or wait for SIOCGIWSCAN and read RID */ - - return ret; -} - - -#ifndef PRISM2_NO_STATION_MODES -static char * __prism2_translate_scan(local_info_t *local, - struct iw_request_info *info, - struct hfa384x_hostscan_result *scan, - struct hostap_bss_info *bss, - char *current_ev, char *end_buf) -{ - int i, chan; - struct iw_event iwe; - char *current_val; - u16 capabilities; - u8 *pos; - u8 *ssid, *bssid; - size_t ssid_len; - char *buf; - - if (bss) { - ssid = bss->ssid; - ssid_len = bss->ssid_len; - bssid = bss->bssid; - } else { - ssid = scan->ssid; - ssid_len = le16_to_cpu(scan->ssid_len); - bssid = scan->bssid; - } - if (ssid_len > 32) - ssid_len = 32; - - /* First entry *MUST* be the AP MAC address */ - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWAP; - iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, - IW_EV_ADDR_LEN); - - /* Other entries will be displayed in the order we give them */ - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWESSID; - iwe.u.data.length = ssid_len; - iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, ssid); - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWMODE; - if (bss) { - capabilities = bss->capab_info; - } else { - capabilities = le16_to_cpu(scan->capability); - } - if (capabilities & (WLAN_CAPABILITY_ESS | - WLAN_CAPABILITY_IBSS)) { - if (capabilities & WLAN_CAPABILITY_ESS) - iwe.u.mode = IW_MODE_MASTER; - else - iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_UINT_LEN); - } - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWFREQ; - if (scan) { - chan = le16_to_cpu(scan->chid); - } else if (bss) { - chan = bss->chan; - } else { - chan = 0; - } - - if (chan > 0) { - iwe.u.freq.m = freq_list[chan - 1] * 100000; - iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_FREQ_LEN); - } - - if (scan) { - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVQUAL; - if (local->last_scan_type == PRISM2_HOSTSCAN) { - iwe.u.qual.level = le16_to_cpu(scan->sl); - iwe.u.qual.noise = le16_to_cpu(scan->anl); - } else { - iwe.u.qual.level = - HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->sl)); - iwe.u.qual.noise = - HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->anl)); - } - iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED - | IW_QUAL_NOISE_UPDATED - | IW_QUAL_QUAL_INVALID - | IW_QUAL_DBM; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_QUAL_LEN); - } - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWENCODE; - if (capabilities & WLAN_CAPABILITY_PRIVACY) - iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; - else - iwe.u.data.flags = IW_ENCODE_DISABLED; - iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, ""); - - /* TODO: add SuppRates into BSS table */ - if (scan) { - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = SIOCGIWRATE; - current_val = current_ev + iwe_stream_lcp_len(info); - pos = scan->sup_rates; - for (i = 0; i < sizeof(scan->sup_rates); i++) { - if (pos[i] == 0) - break; - /* Bit rate given in 500 kb/s units (+ 0x80) */ - iwe.u.bitrate.value = ((pos[i] & 0x7f) * 500000); - current_val = iwe_stream_add_value( - info, current_ev, current_val, end_buf, &iwe, - IW_EV_PARAM_LEN); - } - /* Check if we added any event */ - if ((current_val - current_ev) > iwe_stream_lcp_len(info)) - current_ev = current_val; - } - - /* TODO: add BeaconInt,resp_rate,atim into BSS table */ - buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_ATOMIC); - if (buf && scan) { - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVCUSTOM; - sprintf(buf, "bcn_int=%d", le16_to_cpu(scan->beacon_interval)); - iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, buf); - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVCUSTOM; - sprintf(buf, "resp_rate=%d", le16_to_cpu(scan->rate)); - iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, buf); - - if (local->last_scan_type == PRISM2_HOSTSCAN && - (capabilities & WLAN_CAPABILITY_IBSS)) { - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVCUSTOM; - sprintf(buf, "atim=%d", le16_to_cpu(scan->atim)); - iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(info, current_ev, - end_buf, &iwe, buf); - } - } - kfree(buf); - - if (bss && bss->wpa_ie_len > 0 && bss->wpa_ie_len <= MAX_WPA_IE_LEN) { - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVGENIE; - iwe.u.data.length = bss->wpa_ie_len; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, bss->wpa_ie); - } - - if (bss && bss->rsn_ie_len > 0 && bss->rsn_ie_len <= MAX_WPA_IE_LEN) { - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVGENIE; - iwe.u.data.length = bss->rsn_ie_len; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, bss->rsn_ie); - } - - return current_ev; -} - - -/* Translate scan data returned from the card to a card independent - * format that the Wireless Tools will understand - Jean II */ -static inline int prism2_translate_scan(local_info_t *local, - struct iw_request_info *info, - char *buffer, int buflen) -{ - struct hfa384x_hostscan_result *scan; - int entry; - char *current_ev = buffer; - char *end_buf = buffer + buflen; - struct list_head *ptr; - - spin_lock_bh(&local->lock); - - list_for_each(ptr, &local->bss_list) { - struct hostap_bss_info *bss; - bss = list_entry(ptr, struct hostap_bss_info, list); - bss->included = 0; - } - - for (entry = 0; entry < local->last_scan_results_count; entry++) { - int found = 0; - scan = &local->last_scan_results[entry]; - - /* Report every SSID if the AP is using multiple SSIDs. If no - * BSS record is found (e.g., when WPA mode is disabled), - * report the AP once. */ - list_for_each(ptr, &local->bss_list) { - struct hostap_bss_info *bss; - bss = list_entry(ptr, struct hostap_bss_info, list); - if (ether_addr_equal(bss->bssid, scan->bssid)) { - bss->included = 1; - current_ev = __prism2_translate_scan( - local, info, scan, bss, current_ev, - end_buf); - found++; - } - } - if (!found) { - current_ev = __prism2_translate_scan( - local, info, scan, NULL, current_ev, end_buf); - } - /* Check if there is space for one more entry */ - if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { - /* Ask user space to try again with a bigger buffer */ - spin_unlock_bh(&local->lock); - return -E2BIG; - } - } - - /* Prism2 firmware has limits (32 at least in some versions) for number - * of BSSes in scan results. Extend this limit by using local BSS list. - */ - list_for_each(ptr, &local->bss_list) { - struct hostap_bss_info *bss; - bss = list_entry(ptr, struct hostap_bss_info, list); - if (bss->included) - continue; - current_ev = __prism2_translate_scan(local, info, NULL, bss, - current_ev, end_buf); - /* Check if there is space for one more entry */ - if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { - /* Ask user space to try again with a bigger buffer */ - spin_unlock_bh(&local->lock); - return -E2BIG; - } - } - - spin_unlock_bh(&local->lock); - - return current_ev - buffer; -} -#endif /* PRISM2_NO_STATION_MODES */ - - -static inline int prism2_ioctl_giwscan_sta(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, char *extra) -{ -#ifdef PRISM2_NO_STATION_MODES - return -EOPNOTSUPP; -#else /* PRISM2_NO_STATION_MODES */ - struct hostap_interface *iface; - local_info_t *local; - int res; - - iface = netdev_priv(dev); - local = iface->local; - - /* Wait until the scan is finished. We can probably do better - * than that - Jean II */ - if (local->scan_timestamp && - time_before(jiffies, local->scan_timestamp + 3 * HZ)) { - /* Important note : we don't want to block the caller - * until results are ready for various reasons. - * First, managing wait queues is complex and racy - * (there may be multiple simultaneous callers). - * Second, we grab some rtnetlink lock before coming - * here (in dev_ioctl()). - * Third, the caller can wait on the Wireless Event - * - Jean II */ - return -EAGAIN; - } - local->scan_timestamp = 0; - - res = prism2_translate_scan(local, info, extra, data->length); - - if (res >= 0) { - data->length = res; - return 0; - } else { - data->length = 0; - return res; - } -#endif /* PRISM2_NO_STATION_MODES */ -} - - -static int prism2_ioctl_giwscan(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_point *data = &wrqu->data; - struct hostap_interface *iface; - local_info_t *local; - int res; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->iw_mode == IW_MODE_MASTER) { - /* In MASTER mode, it doesn't make sense to go around - * scanning the frequencies and make the stations we serve - * wait when what the user is really interested about is the - * list of stations and access points we are talking to. - * So, just extract results from our cache... - * Jean II */ - - /* Translate to WE format */ - res = prism2_ap_translate_scan(dev, info, extra); - if (res >= 0) { - printk(KERN_DEBUG "Scan result translation succeeded " - "(length=%d)\n", res); - data->length = res; - return 0; - } else { - printk(KERN_DEBUG - "Scan result translation failed (res=%d)\n", - res); - data->length = 0; - return res; - } - } else { - /* Station mode */ - return prism2_ioctl_giwscan_sta(dev, info, data, extra); - } -} - - -static const struct iw_priv_args prism2_priv[] = { - { PRISM2_IOCTL_MONITOR, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor" }, - { PRISM2_IOCTL_READMIF, - IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "readmif" }, - { PRISM2_IOCTL_WRITEMIF, - IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2, 0, "writemif" }, - { PRISM2_IOCTL_RESET, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "reset" }, - { PRISM2_IOCTL_INQUIRE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "inquire" }, - { PRISM2_IOCTL_SET_RID_WORD, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_rid_word" }, - { PRISM2_IOCTL_MACCMD, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "maccmd" }, - { PRISM2_IOCTL_WDS_ADD, - IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_add" }, - { PRISM2_IOCTL_WDS_DEL, - IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_del" }, - { PRISM2_IOCTL_ADDMAC, - IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "addmac" }, - { PRISM2_IOCTL_DELMAC, - IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "delmac" }, - { PRISM2_IOCTL_KICKMAC, - IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "kickmac" }, - /* --- raw access to sub-ioctls --- */ - { PRISM2_IOCTL_PRISM2_PARAM, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "prism2_param" }, - { PRISM2_IOCTL_GET_PRISM2_PARAM, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprism2_param" }, - /* --- sub-ioctls handlers --- */ - { PRISM2_IOCTL_PRISM2_PARAM, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "" }, - { PRISM2_IOCTL_GET_PRISM2_PARAM, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "" }, - /* --- sub-ioctls definitions --- */ - { PRISM2_PARAM_TXRATECTRL, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "txratectrl" }, - { PRISM2_PARAM_TXRATECTRL, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettxratectrl" }, - { PRISM2_PARAM_BEACON_INT, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "beacon_int" }, - { PRISM2_PARAM_BEACON_INT, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbeacon_int" }, -#ifndef PRISM2_NO_STATION_MODES - { PRISM2_PARAM_PSEUDO_IBSS, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "pseudo_ibss" }, - { PRISM2_PARAM_PSEUDO_IBSS, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getpseudo_ibss" }, -#endif /* PRISM2_NO_STATION_MODES */ - { PRISM2_PARAM_ALC, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "alc" }, - { PRISM2_PARAM_ALC, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getalc" }, - { PRISM2_PARAM_DUMP, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dump" }, - { PRISM2_PARAM_DUMP, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdump" }, - { PRISM2_PARAM_OTHER_AP_POLICY, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "other_ap_policy" }, - { PRISM2_PARAM_OTHER_AP_POLICY, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getother_ap_pol" }, - { PRISM2_PARAM_AP_MAX_INACTIVITY, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_inactivity" }, - { PRISM2_PARAM_AP_MAX_INACTIVITY, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_inactivi" }, - { PRISM2_PARAM_AP_BRIDGE_PACKETS, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bridge_packets" }, - { PRISM2_PARAM_AP_BRIDGE_PACKETS, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbridge_packe" }, - { PRISM2_PARAM_DTIM_PERIOD, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dtim_period" }, - { PRISM2_PARAM_DTIM_PERIOD, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdtim_period" }, - { PRISM2_PARAM_AP_NULLFUNC_ACK, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "nullfunc_ack" }, - { PRISM2_PARAM_AP_NULLFUNC_ACK, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getnullfunc_ack" }, - { PRISM2_PARAM_MAX_WDS, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_wds" }, - { PRISM2_PARAM_MAX_WDS, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_wds" }, - { PRISM2_PARAM_AP_AUTOM_AP_WDS, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "autom_ap_wds" }, - { PRISM2_PARAM_AP_AUTOM_AP_WDS, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getautom_ap_wds" }, - { PRISM2_PARAM_AP_AUTH_ALGS, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_auth_algs" }, - { PRISM2_PARAM_AP_AUTH_ALGS, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_auth_algs" }, - { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "allow_fcserr" }, - { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getallow_fcserr" }, - { PRISM2_PARAM_HOST_ENCRYPT, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_encrypt" }, - { PRISM2_PARAM_HOST_ENCRYPT, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_encrypt" }, - { PRISM2_PARAM_HOST_DECRYPT, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_decrypt" }, - { PRISM2_PARAM_HOST_DECRYPT, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_decrypt" }, -#ifndef PRISM2_NO_STATION_MODES - { PRISM2_PARAM_HOST_ROAMING, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_roaming" }, - { PRISM2_PARAM_HOST_ROAMING, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_roaming" }, -#endif /* PRISM2_NO_STATION_MODES */ - { PRISM2_PARAM_BCRX_STA_KEY, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bcrx_sta_key" }, - { PRISM2_PARAM_BCRX_STA_KEY, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbcrx_sta_key" }, - { PRISM2_PARAM_IEEE_802_1X, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ieee_802_1x" }, - { PRISM2_PARAM_IEEE_802_1X, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getieee_802_1x" }, - { PRISM2_PARAM_ANTSEL_TX, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_tx" }, - { PRISM2_PARAM_ANTSEL_TX, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_tx" }, - { PRISM2_PARAM_ANTSEL_RX, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_rx" }, - { PRISM2_PARAM_ANTSEL_RX, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_rx" }, - { PRISM2_PARAM_MONITOR_TYPE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor_type" }, - { PRISM2_PARAM_MONITOR_TYPE, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmonitor_type" }, - { PRISM2_PARAM_WDS_TYPE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wds_type" }, - { PRISM2_PARAM_WDS_TYPE, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwds_type" }, - { PRISM2_PARAM_HOSTSCAN, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostscan" }, - { PRISM2_PARAM_HOSTSCAN, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostscan" }, - { PRISM2_PARAM_AP_SCAN, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_scan" }, - { PRISM2_PARAM_AP_SCAN, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_scan" }, - { PRISM2_PARAM_ENH_SEC, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "enh_sec" }, - { PRISM2_PARAM_ENH_SEC, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getenh_sec" }, -#ifdef PRISM2_IO_DEBUG - { PRISM2_PARAM_IO_DEBUG, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "io_debug" }, - { PRISM2_PARAM_IO_DEBUG, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getio_debug" }, -#endif /* PRISM2_IO_DEBUG */ - { PRISM2_PARAM_BASIC_RATES, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "basic_rates" }, - { PRISM2_PARAM_BASIC_RATES, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbasic_rates" }, - { PRISM2_PARAM_OPER_RATES, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "oper_rates" }, - { PRISM2_PARAM_OPER_RATES, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getoper_rates" }, - { PRISM2_PARAM_HOSTAPD, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd" }, - { PRISM2_PARAM_HOSTAPD, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd" }, - { PRISM2_PARAM_HOSTAPD_STA, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd_sta" }, - { PRISM2_PARAM_HOSTAPD_STA, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd_sta" }, - { PRISM2_PARAM_WPA, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wpa" }, - { PRISM2_PARAM_WPA, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwpa" }, - { PRISM2_PARAM_PRIVACY_INVOKED, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "privacy_invoked" }, - { PRISM2_PARAM_PRIVACY_INVOKED, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprivacy_invo" }, - { PRISM2_PARAM_TKIP_COUNTERMEASURES, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "tkip_countermea" }, - { PRISM2_PARAM_TKIP_COUNTERMEASURES, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettkip_counter" }, - { PRISM2_PARAM_DROP_UNENCRYPTED, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "drop_unencrypte" }, - { PRISM2_PARAM_DROP_UNENCRYPTED, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdrop_unencry" }, - { PRISM2_PARAM_SCAN_CHANNEL_MASK, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "scan_channels" }, - { PRISM2_PARAM_SCAN_CHANNEL_MASK, - 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getscan_channel" }, -}; - - -static int prism2_ioctl_priv_prism2_param(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *uwrq, char *extra) -{ - struct hostap_interface *iface; - local_info_t *local; - int *i = (int *) extra; - int param = *i; - int value = *(i + 1); - int ret = 0; - u16 val; - - iface = netdev_priv(dev); - local = iface->local; - - switch (param) { - case PRISM2_PARAM_TXRATECTRL: - local->fw_tx_rate_control = value; - break; - - case PRISM2_PARAM_BEACON_INT: - if (hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, value) || - local->func->reset_port(dev)) - ret = -EINVAL; - else - local->beacon_int = value; - break; - -#ifndef PRISM2_NO_STATION_MODES - case PRISM2_PARAM_PSEUDO_IBSS: - if (value == local->pseudo_adhoc) - break; - - if (value != 0 && value != 1) { - ret = -EINVAL; - break; - } - - printk(KERN_DEBUG "prism2: %s: pseudo IBSS change %d -> %d\n", - dev->name, local->pseudo_adhoc, value); - local->pseudo_adhoc = value; - if (local->iw_mode != IW_MODE_ADHOC) - break; - - if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, - hostap_get_porttype(local))) { - ret = -EOPNOTSUPP; - break; - } - - if (local->func->reset_port(dev)) - ret = -EINVAL; - break; -#endif /* PRISM2_NO_STATION_MODES */ - - case PRISM2_PARAM_ALC: - printk(KERN_DEBUG "%s: %s ALC\n", dev->name, - value == 0 ? "Disabling" : "Enabling"); - val = HFA384X_TEST_CFG_BIT_ALC; - local->func->cmd(dev, HFA384X_CMDCODE_TEST | - (HFA384X_TEST_CFG_BITS << 8), - value == 0 ? 0 : 1, &val, NULL); - break; - - case PRISM2_PARAM_DUMP: - local->frame_dump = value; - break; - - case PRISM2_PARAM_OTHER_AP_POLICY: - if (value < 0 || value > 3) { - ret = -EINVAL; - break; - } - if (local->ap != NULL) - local->ap->ap_policy = value; - break; - - case PRISM2_PARAM_AP_MAX_INACTIVITY: - if (value < 0 || value > 7 * 24 * 60 * 60) { - ret = -EINVAL; - break; - } - if (local->ap != NULL) - local->ap->max_inactivity = value * HZ; - break; - - case PRISM2_PARAM_AP_BRIDGE_PACKETS: - if (local->ap != NULL) - local->ap->bridge_packets = value; - break; - - case PRISM2_PARAM_DTIM_PERIOD: - if (value < 0 || value > 65535) { - ret = -EINVAL; - break; - } - if (hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, value) - || local->func->reset_port(dev)) - ret = -EINVAL; - else - local->dtim_period = value; - break; - - case PRISM2_PARAM_AP_NULLFUNC_ACK: - if (local->ap != NULL) - local->ap->nullfunc_ack = value; - break; - - case PRISM2_PARAM_MAX_WDS: - local->wds_max_connections = value; - break; - - case PRISM2_PARAM_AP_AUTOM_AP_WDS: - if (local->ap != NULL) { - if (!local->ap->autom_ap_wds && value) { - /* add WDS link to all APs in STA table */ - hostap_add_wds_links(local); - } - local->ap->autom_ap_wds = value; - } - break; - - case PRISM2_PARAM_AP_AUTH_ALGS: - local->auth_algs = value; - if (hostap_set_auth_algs(local)) - ret = -EINVAL; - break; - - case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: - local->monitor_allow_fcserr = value; - break; - - case PRISM2_PARAM_HOST_ENCRYPT: - local->host_encrypt = value; - if (hostap_set_encryption(local) || - local->func->reset_port(dev)) - ret = -EINVAL; - break; - - case PRISM2_PARAM_HOST_DECRYPT: - local->host_decrypt = value; - if (hostap_set_encryption(local) || - local->func->reset_port(dev)) - ret = -EINVAL; - break; - -#ifndef PRISM2_NO_STATION_MODES - case PRISM2_PARAM_HOST_ROAMING: - if (value < 0 || value > 2) { - ret = -EINVAL; - break; - } - local->host_roaming = value; - if (hostap_set_roaming(local) || local->func->reset_port(dev)) - ret = -EINVAL; - break; -#endif /* PRISM2_NO_STATION_MODES */ - - case PRISM2_PARAM_BCRX_STA_KEY: - local->bcrx_sta_key = value; - break; - - case PRISM2_PARAM_IEEE_802_1X: - local->ieee_802_1x = value; - break; - - case PRISM2_PARAM_ANTSEL_TX: - if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { - ret = -EINVAL; - break; - } - local->antsel_tx = value; - hostap_set_antsel(local); - break; - - case PRISM2_PARAM_ANTSEL_RX: - if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { - ret = -EINVAL; - break; - } - local->antsel_rx = value; - hostap_set_antsel(local); - break; - - case PRISM2_PARAM_MONITOR_TYPE: - if (value != PRISM2_MONITOR_80211 && - value != PRISM2_MONITOR_CAPHDR && - value != PRISM2_MONITOR_PRISM && - value != PRISM2_MONITOR_RADIOTAP) { - ret = -EINVAL; - break; - } - local->monitor_type = value; - if (local->iw_mode == IW_MODE_MONITOR) - hostap_monitor_set_type(local); - break; - - case PRISM2_PARAM_WDS_TYPE: - local->wds_type = value; - break; - - case PRISM2_PARAM_HOSTSCAN: - { - struct hfa384x_hostscan_request scan_req; - u16 rate; - - memset(&scan_req, 0, sizeof(scan_req)); - scan_req.channel_list = cpu_to_le16(0x3fff); - switch (value) { - case 1: rate = HFA384X_RATES_1MBPS; break; - case 2: rate = HFA384X_RATES_2MBPS; break; - case 3: rate = HFA384X_RATES_5MBPS; break; - case 4: rate = HFA384X_RATES_11MBPS; break; - default: rate = HFA384X_RATES_1MBPS; break; - } - scan_req.txrate = cpu_to_le16(rate); - /* leave SSID empty to accept all SSIDs */ - - if (local->iw_mode == IW_MODE_MASTER) { - if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, - HFA384X_PORTTYPE_BSS) || - local->func->reset_port(dev)) - printk(KERN_DEBUG "Leaving Host AP mode " - "for HostScan failed\n"); - } - - if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, - sizeof(scan_req))) { - printk(KERN_DEBUG "HOSTSCAN failed\n"); - ret = -EINVAL; - } - if (local->iw_mode == IW_MODE_MASTER) { - wait_queue_entry_t __wait; - init_waitqueue_entry(&__wait, current); - add_wait_queue(&local->hostscan_wq, &__wait); - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ); - if (signal_pending(current)) - ret = -EINTR; - set_current_state(TASK_RUNNING); - remove_wait_queue(&local->hostscan_wq, &__wait); - - if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, - HFA384X_PORTTYPE_HOSTAP) || - local->func->reset_port(dev)) - printk(KERN_DEBUG "Returning to Host AP mode " - "after HostScan failed\n"); - } - break; - } - - case PRISM2_PARAM_AP_SCAN: - local->passive_scan_interval = value; - if (timer_pending(&local->passive_scan_timer)) - del_timer(&local->passive_scan_timer); - if (value > 0 && value < INT_MAX / HZ) { - local->passive_scan_timer.expires = jiffies + - local->passive_scan_interval * HZ; - add_timer(&local->passive_scan_timer); - } - break; - - case PRISM2_PARAM_ENH_SEC: - if (value < 0 || value > 3) { - ret = -EINVAL; - break; - } - local->enh_sec = value; - if (hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, - local->enh_sec) || - local->func->reset_port(dev)) { - printk(KERN_INFO "%s: cnfEnhSecurity requires STA f/w " - "1.6.3 or newer\n", dev->name); - ret = -EOPNOTSUPP; - } - break; - -#ifdef PRISM2_IO_DEBUG - case PRISM2_PARAM_IO_DEBUG: - local->io_debug_enabled = value; - break; -#endif /* PRISM2_IO_DEBUG */ - - case PRISM2_PARAM_BASIC_RATES: - if ((value & local->tx_rate_control) != value || value == 0) { - printk(KERN_INFO "%s: invalid basic rate set - basic " - "rates must be in supported rate set\n", - dev->name); - ret = -EINVAL; - break; - } - local->basic_rates = value; - if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, - local->basic_rates) || - local->func->reset_port(dev)) - ret = -EINVAL; - break; - - case PRISM2_PARAM_OPER_RATES: - local->tx_rate_control = value; - if (hostap_set_rate(dev)) - ret = -EINVAL; - break; - - case PRISM2_PARAM_HOSTAPD: - ret = hostap_set_hostapd(local, value, 1); - break; - - case PRISM2_PARAM_HOSTAPD_STA: - ret = hostap_set_hostapd_sta(local, value, 1); - break; - - case PRISM2_PARAM_WPA: - local->wpa = value; - if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) - ret = -EOPNOTSUPP; - else if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, - value ? 1 : 0)) - ret = -EINVAL; - break; - - case PRISM2_PARAM_PRIVACY_INVOKED: - local->privacy_invoked = value; - if (hostap_set_encryption(local) || - local->func->reset_port(dev)) - ret = -EINVAL; - break; - - case PRISM2_PARAM_TKIP_COUNTERMEASURES: - local->tkip_countermeasures = value; - break; - - case PRISM2_PARAM_DROP_UNENCRYPTED: - local->drop_unencrypted = value; - break; - - case PRISM2_PARAM_SCAN_CHANNEL_MASK: - local->scan_channel_mask = value; - break; - - default: - printk(KERN_DEBUG "%s: prism2_param: unknown param %d\n", - dev->name, param); - ret = -EOPNOTSUPP; - break; - } - - return ret; -} - - -static int prism2_ioctl_priv_get_prism2_param(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct hostap_interface *iface; - local_info_t *local; - int *param = (int *) extra; - int ret = 0; - - iface = netdev_priv(dev); - local = iface->local; - - switch (*param) { - case PRISM2_PARAM_TXRATECTRL: - *param = local->fw_tx_rate_control; - break; - - case PRISM2_PARAM_BEACON_INT: - *param = local->beacon_int; - break; - - case PRISM2_PARAM_PSEUDO_IBSS: - *param = local->pseudo_adhoc; - break; - - case PRISM2_PARAM_ALC: - ret = -EOPNOTSUPP; /* FIX */ - break; - - case PRISM2_PARAM_DUMP: - *param = local->frame_dump; - break; - - case PRISM2_PARAM_OTHER_AP_POLICY: - if (local->ap != NULL) - *param = local->ap->ap_policy; - else - ret = -EOPNOTSUPP; - break; - - case PRISM2_PARAM_AP_MAX_INACTIVITY: - if (local->ap != NULL) - *param = local->ap->max_inactivity / HZ; - else - ret = -EOPNOTSUPP; - break; - - case PRISM2_PARAM_AP_BRIDGE_PACKETS: - if (local->ap != NULL) - *param = local->ap->bridge_packets; - else - ret = -EOPNOTSUPP; - break; - - case PRISM2_PARAM_DTIM_PERIOD: - *param = local->dtim_period; - break; - - case PRISM2_PARAM_AP_NULLFUNC_ACK: - if (local->ap != NULL) - *param = local->ap->nullfunc_ack; - else - ret = -EOPNOTSUPP; - break; - - case PRISM2_PARAM_MAX_WDS: - *param = local->wds_max_connections; - break; - - case PRISM2_PARAM_AP_AUTOM_AP_WDS: - if (local->ap != NULL) - *param = local->ap->autom_ap_wds; - else - ret = -EOPNOTSUPP; - break; - - case PRISM2_PARAM_AP_AUTH_ALGS: - *param = local->auth_algs; - break; - - case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: - *param = local->monitor_allow_fcserr; - break; - - case PRISM2_PARAM_HOST_ENCRYPT: - *param = local->host_encrypt; - break; - - case PRISM2_PARAM_HOST_DECRYPT: - *param = local->host_decrypt; - break; - - case PRISM2_PARAM_HOST_ROAMING: - *param = local->host_roaming; - break; - - case PRISM2_PARAM_BCRX_STA_KEY: - *param = local->bcrx_sta_key; - break; - - case PRISM2_PARAM_IEEE_802_1X: - *param = local->ieee_802_1x; - break; - - case PRISM2_PARAM_ANTSEL_TX: - *param = local->antsel_tx; - break; - - case PRISM2_PARAM_ANTSEL_RX: - *param = local->antsel_rx; - break; - - case PRISM2_PARAM_MONITOR_TYPE: - *param = local->monitor_type; - break; - - case PRISM2_PARAM_WDS_TYPE: - *param = local->wds_type; - break; - - case PRISM2_PARAM_HOSTSCAN: - ret = -EOPNOTSUPP; - break; - - case PRISM2_PARAM_AP_SCAN: - *param = local->passive_scan_interval; - break; - - case PRISM2_PARAM_ENH_SEC: - *param = local->enh_sec; - break; - -#ifdef PRISM2_IO_DEBUG - case PRISM2_PARAM_IO_DEBUG: - *param = local->io_debug_enabled; - break; -#endif /* PRISM2_IO_DEBUG */ - - case PRISM2_PARAM_BASIC_RATES: - *param = local->basic_rates; - break; - - case PRISM2_PARAM_OPER_RATES: - *param = local->tx_rate_control; - break; - - case PRISM2_PARAM_HOSTAPD: - *param = local->hostapd; - break; - - case PRISM2_PARAM_HOSTAPD_STA: - *param = local->hostapd_sta; - break; - - case PRISM2_PARAM_WPA: - if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) - ret = -EOPNOTSUPP; - *param = local->wpa; - break; - - case PRISM2_PARAM_PRIVACY_INVOKED: - *param = local->privacy_invoked; - break; - - case PRISM2_PARAM_TKIP_COUNTERMEASURES: - *param = local->tkip_countermeasures; - break; - - case PRISM2_PARAM_DROP_UNENCRYPTED: - *param = local->drop_unencrypted; - break; - - case PRISM2_PARAM_SCAN_CHANNEL_MASK: - *param = local->scan_channel_mask; - break; - - default: - printk(KERN_DEBUG "%s: get_prism2_param: unknown param %d\n", - dev->name, *param); - ret = -EOPNOTSUPP; - break; - } - - return ret; -} - - -static int prism2_ioctl_priv_readmif(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct hostap_interface *iface; - local_info_t *local; - u16 resp0; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, *extra, NULL, - &resp0)) - return -EOPNOTSUPP; - else - *extra = resp0; - - return 0; -} - - -static int prism2_ioctl_priv_writemif(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct hostap_interface *iface; - local_info_t *local; - u16 cr, val; - - iface = netdev_priv(dev); - local = iface->local; - - cr = *extra; - val = *(extra + 1); - if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, cr, &val, NULL)) - return -EOPNOTSUPP; - - return 0; -} - - -#ifdef PRISM2_DOWNLOAD_SUPPORT -static int prism2_ioctl_priv_download(local_info_t *local, struct iw_point *p) -{ - struct prism2_download_param *param; - int ret = 0; - - if (p->length < sizeof(struct prism2_download_param) || - p->length > 1024 || !p->pointer) - return -EINVAL; - - param = memdup_user(p->pointer, p->length); - if (IS_ERR(param)) { - return PTR_ERR(param); - } - - if (p->length < sizeof(struct prism2_download_param) + - param->num_areas * sizeof(struct prism2_download_area)) { - ret = -EINVAL; - goto out; - } - - ret = local->func->download(local, param); - - out: - kfree(param); - return ret; -} -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - - -static int prism2_set_genericelement(struct net_device *dev, u8 *elem, - size_t len) -{ - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - u8 *buf; - - /* - * Add 16-bit length in the beginning of the buffer because Prism2 RID - * includes it. - */ - buf = kmalloc(len + 2, GFP_KERNEL); - if (buf == NULL) - return -ENOMEM; - - *((__le16 *) buf) = cpu_to_le16(len); - memcpy(buf + 2, elem, len); - - kfree(local->generic_elem); - local->generic_elem = buf; - local->generic_elem_len = len + 2; - - return local->func->set_rid(local->dev, HFA384X_RID_GENERICELEMENT, - buf, len + 2); -} - - -static int prism2_ioctl_siwauth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *data = &wrqu->param; - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - - switch (data->flags & IW_AUTH_INDEX) { - case IW_AUTH_WPA_VERSION: - case IW_AUTH_CIPHER_PAIRWISE: - case IW_AUTH_CIPHER_GROUP: - case IW_AUTH_KEY_MGMT: - /* - * Host AP driver does not use these parameters and allows - * wpa_supplicant to control them internally. - */ - break; - case IW_AUTH_TKIP_COUNTERMEASURES: - local->tkip_countermeasures = data->value; - break; - case IW_AUTH_DROP_UNENCRYPTED: - local->drop_unencrypted = data->value; - break; - case IW_AUTH_80211_AUTH_ALG: - local->auth_algs = data->value; - break; - case IW_AUTH_WPA_ENABLED: - if (data->value == 0) { - local->wpa = 0; - if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) - break; - prism2_set_genericelement(dev, "", 0); - local->host_roaming = 0; - local->privacy_invoked = 0; - if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, - 0) || - hostap_set_roaming(local) || - hostap_set_encryption(local) || - local->func->reset_port(dev)) - return -EINVAL; - break; - } - if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) - return -EOPNOTSUPP; - local->host_roaming = 2; - local->privacy_invoked = 1; - local->wpa = 1; - if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1) || - hostap_set_roaming(local) || - hostap_set_encryption(local) || - local->func->reset_port(dev)) - return -EINVAL; - break; - case IW_AUTH_RX_UNENCRYPTED_EAPOL: - local->ieee_802_1x = data->value; - break; - case IW_AUTH_PRIVACY_INVOKED: - local->privacy_invoked = data->value; - break; - default: - return -EOPNOTSUPP; - } - return 0; -} - - -static int prism2_ioctl_giwauth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_param *data = &wrqu->param; - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - - switch (data->flags & IW_AUTH_INDEX) { - case IW_AUTH_WPA_VERSION: - case IW_AUTH_CIPHER_PAIRWISE: - case IW_AUTH_CIPHER_GROUP: - case IW_AUTH_KEY_MGMT: - /* - * Host AP driver does not use these parameters and allows - * wpa_supplicant to control them internally. - */ - return -EOPNOTSUPP; - case IW_AUTH_TKIP_COUNTERMEASURES: - data->value = local->tkip_countermeasures; - break; - case IW_AUTH_DROP_UNENCRYPTED: - data->value = local->drop_unencrypted; - break; - case IW_AUTH_80211_AUTH_ALG: - data->value = local->auth_algs; - break; - case IW_AUTH_WPA_ENABLED: - data->value = local->wpa; - break; - case IW_AUTH_RX_UNENCRYPTED_EAPOL: - data->value = local->ieee_802_1x; - break; - default: - return -EOPNOTSUPP; - } - return 0; -} - - -static int prism2_ioctl_siwencodeext(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_point *erq = &wrqu->encoding; - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; - int i, ret = 0; - struct lib80211_crypto_ops *ops; - struct lib80211_crypt_data **crypt; - void *sta_ptr; - u8 *addr; - const char *alg, *module; - - i = erq->flags & IW_ENCODE_INDEX; - if (i > WEP_KEYS) - return -EINVAL; - if (i < 1 || i > WEP_KEYS) - i = local->crypt_info.tx_keyidx; - else - i--; - if (i < 0 || i >= WEP_KEYS) - return -EINVAL; - - addr = ext->addr.sa_data; - if (is_broadcast_ether_addr(addr)) { - sta_ptr = NULL; - crypt = &local->crypt_info.crypt[i]; - } else { - if (i != 0) - return -EINVAL; - sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); - if (sta_ptr == NULL) { - if (local->iw_mode == IW_MODE_INFRA) { - /* - * TODO: add STA entry for the current AP so - * that unicast key can be used. For now, this - * is emulated by using default key idx 0. - */ - i = 0; - crypt = &local->crypt_info.crypt[i]; - } else - return -EINVAL; - } - } - - if ((erq->flags & IW_ENCODE_DISABLED) || - ext->alg == IW_ENCODE_ALG_NONE) { - if (*crypt) - lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); - goto done; - } - - switch (ext->alg) { - case IW_ENCODE_ALG_WEP: - alg = "WEP"; - module = "lib80211_crypt_wep"; - break; - case IW_ENCODE_ALG_TKIP: - alg = "TKIP"; - module = "lib80211_crypt_tkip"; - break; - case IW_ENCODE_ALG_CCMP: - alg = "CCMP"; - module = "lib80211_crypt_ccmp"; - break; - default: - printk(KERN_DEBUG "%s: unsupported algorithm %d\n", - local->dev->name, ext->alg); - ret = -EOPNOTSUPP; - goto done; - } - - ops = lib80211_get_crypto_ops(alg); - if (ops == NULL) { - request_module(module); - ops = lib80211_get_crypto_ops(alg); - } - if (ops == NULL) { - printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", - local->dev->name, alg); - ret = -EOPNOTSUPP; - goto done; - } - - if (sta_ptr || ext->alg != IW_ENCODE_ALG_WEP) { - /* - * Per station encryption and other than WEP algorithms - * require host-based encryption, so force them on - * automatically. - */ - local->host_decrypt = local->host_encrypt = 1; - } - - if (*crypt == NULL || (*crypt)->ops != ops) { - struct lib80211_crypt_data *new_crypt; - - lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); - - new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), - GFP_KERNEL); - if (new_crypt == NULL) { - ret = -ENOMEM; - goto done; - } - new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) - new_crypt->priv = new_crypt->ops->init(i); - if (new_crypt->priv == NULL) { - kfree(new_crypt); - ret = -EINVAL; - goto done; - } - - *crypt = new_crypt; - } - - /* - * TODO: if ext_flags does not have IW_ENCODE_EXT_RX_SEQ_VALID, the - * existing seq# should not be changed. - * TODO: if ext_flags has IW_ENCODE_EXT_TX_SEQ_VALID, next TX seq# - * should be changed to something else than zero. - */ - if ((!(ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) || ext->key_len > 0) - && (*crypt)->ops->set_key && - (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq, - (*crypt)->priv) < 0) { - printk(KERN_DEBUG "%s: key setting failed\n", - local->dev->name); - ret = -EINVAL; - goto done; - } - - if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { - if (!sta_ptr) - local->crypt_info.tx_keyidx = i; - } - - - if (sta_ptr == NULL && ext->key_len > 0) { - int first = 1, j; - for (j = 0; j < WEP_KEYS; j++) { - if (j != i && local->crypt_info.crypt[j]) { - first = 0; - break; - } - } - if (first) - local->crypt_info.tx_keyidx = i; - } - - done: - if (sta_ptr) - hostap_handle_sta_release(sta_ptr); - - local->open_wep = erq->flags & IW_ENCODE_OPEN; - - /* - * Do not reset port0 if card is in Managed mode since resetting will - * generate new IEEE 802.11 authentication which may end up in looping - * with IEEE 802.1X. Prism2 documentation seem to require port reset - * after WEP configuration. However, keys are apparently changed at - * least in Managed mode. - */ - if (ret == 0 && - (hostap_set_encryption(local) || - (local->iw_mode != IW_MODE_INFRA && - local->func->reset_port(local->dev)))) - ret = -EINVAL; - - return ret; -} - - -static int prism2_ioctl_giwencodeext(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_point *erq = &wrqu->encoding; - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - struct lib80211_crypt_data **crypt; - void *sta_ptr; - int max_key_len, i; - struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; - u8 *addr; - - max_key_len = erq->length - sizeof(*ext); - if (max_key_len < 0) - return -EINVAL; - - i = erq->flags & IW_ENCODE_INDEX; - if (i < 1 || i > WEP_KEYS) - i = local->crypt_info.tx_keyidx; - else - i--; - - addr = ext->addr.sa_data; - if (is_broadcast_ether_addr(addr)) { - sta_ptr = NULL; - crypt = &local->crypt_info.crypt[i]; - } else { - i = 0; - sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); - if (sta_ptr == NULL) - return -EINVAL; - } - erq->flags = i + 1; - memset(ext, 0, sizeof(*ext)); - - if (*crypt == NULL || (*crypt)->ops == NULL) { - ext->alg = IW_ENCODE_ALG_NONE; - ext->key_len = 0; - erq->flags |= IW_ENCODE_DISABLED; - } else { - if (strcmp((*crypt)->ops->name, "WEP") == 0) - ext->alg = IW_ENCODE_ALG_WEP; - else if (strcmp((*crypt)->ops->name, "TKIP") == 0) - ext->alg = IW_ENCODE_ALG_TKIP; - else if (strcmp((*crypt)->ops->name, "CCMP") == 0) - ext->alg = IW_ENCODE_ALG_CCMP; - else - return -EINVAL; - - if ((*crypt)->ops->get_key) { - ext->key_len = - (*crypt)->ops->get_key(ext->key, - max_key_len, - ext->tx_seq, - (*crypt)->priv); - if (ext->key_len && - (ext->alg == IW_ENCODE_ALG_TKIP || - ext->alg == IW_ENCODE_ALG_CCMP)) - ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID; - } - } - - if (sta_ptr) - hostap_handle_sta_release(sta_ptr); - - return 0; -} - - -static int prism2_ioctl_set_encryption(local_info_t *local, - struct prism2_hostapd_param *param, - int param_len) -{ - int ret = 0; - struct lib80211_crypto_ops *ops; - struct lib80211_crypt_data **crypt; - void *sta_ptr; - - param->u.crypt.err = 0; - param->u.crypt.alg[HOSTAP_CRYPT_ALG_NAME_LEN - 1] = '\0'; - - if (param_len != - (int) ((char *) param->u.crypt.key - (char *) param) + - param->u.crypt.key_len) - return -EINVAL; - - if (is_broadcast_ether_addr(param->sta_addr)) { - if (param->u.crypt.idx >= WEP_KEYS) - return -EINVAL; - sta_ptr = NULL; - crypt = &local->crypt_info.crypt[param->u.crypt.idx]; - } else { - if (param->u.crypt.idx) - return -EINVAL; - sta_ptr = ap_crypt_get_ptrs( - local->ap, param->sta_addr, - (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_PERMANENT), - &crypt); - - if (sta_ptr == NULL) { - param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; - return -EINVAL; - } - } - - if (strcmp(param->u.crypt.alg, "none") == 0) { - if (crypt) - lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); - goto done; - } - - ops = lib80211_get_crypto_ops(param->u.crypt.alg); - if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { - request_module("lib80211_crypt_wep"); - ops = lib80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { - request_module("lib80211_crypt_tkip"); - ops = lib80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { - request_module("lib80211_crypt_ccmp"); - ops = lib80211_get_crypto_ops(param->u.crypt.alg); - } - if (ops == NULL) { - printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", - local->dev->name, param->u.crypt.alg); - param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ALG; - ret = -EINVAL; - goto done; - } - - /* station based encryption and other than WEP algorithms require - * host-based encryption, so force them on automatically */ - local->host_decrypt = local->host_encrypt = 1; - - if (*crypt == NULL || (*crypt)->ops != ops) { - struct lib80211_crypt_data *new_crypt; - - lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); - - new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), - GFP_KERNEL); - if (new_crypt == NULL) { - ret = -ENOMEM; - goto done; - } - new_crypt->ops = ops; - new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); - if (new_crypt->priv == NULL) { - kfree(new_crypt); - param->u.crypt.err = - HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED; - ret = -EINVAL; - goto done; - } - - *crypt = new_crypt; - } - - if ((!(param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) || - param->u.crypt.key_len > 0) && (*crypt)->ops->set_key && - (*crypt)->ops->set_key(param->u.crypt.key, - param->u.crypt.key_len, param->u.crypt.seq, - (*crypt)->priv) < 0) { - printk(KERN_DEBUG "%s: key setting failed\n", - local->dev->name); - param->u.crypt.err = HOSTAP_CRYPT_ERR_KEY_SET_FAILED; - ret = -EINVAL; - goto done; - } - - if (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) { - if (!sta_ptr) - local->crypt_info.tx_keyidx = param->u.crypt.idx; - else if (param->u.crypt.idx) { - printk(KERN_DEBUG "%s: TX key idx setting failed\n", - local->dev->name); - param->u.crypt.err = - HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED; - ret = -EINVAL; - goto done; - } - } - - done: - if (sta_ptr) - hostap_handle_sta_release(sta_ptr); - - /* Do not reset port0 if card is in Managed mode since resetting will - * generate new IEEE 802.11 authentication which may end up in looping - * with IEEE 802.1X. Prism2 documentation seem to require port reset - * after WEP configuration. However, keys are apparently changed at - * least in Managed mode. */ - if (ret == 0 && - (hostap_set_encryption(local) || - (local->iw_mode != IW_MODE_INFRA && - local->func->reset_port(local->dev)))) { - param->u.crypt.err = HOSTAP_CRYPT_ERR_CARD_CONF_FAILED; - return -EINVAL; - } - - return ret; -} - - -static int prism2_ioctl_get_encryption(local_info_t *local, - struct prism2_hostapd_param *param, - int param_len) -{ - struct lib80211_crypt_data **crypt; - void *sta_ptr; - int max_key_len; - - param->u.crypt.err = 0; - - max_key_len = param_len - - (int) ((char *) param->u.crypt.key - (char *) param); - if (max_key_len < 0) - return -EINVAL; - - if (is_broadcast_ether_addr(param->sta_addr)) { - sta_ptr = NULL; - if (param->u.crypt.idx >= WEP_KEYS) - param->u.crypt.idx = local->crypt_info.tx_keyidx; - crypt = &local->crypt_info.crypt[param->u.crypt.idx]; - } else { - param->u.crypt.idx = 0; - sta_ptr = ap_crypt_get_ptrs(local->ap, param->sta_addr, 0, - &crypt); - - if (sta_ptr == NULL) { - param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; - return -EINVAL; - } - } - - if (*crypt == NULL || (*crypt)->ops == NULL) { - memcpy(param->u.crypt.alg, "none", 5); - param->u.crypt.key_len = 0; - param->u.crypt.idx = 0xff; - } else { - strscpy(param->u.crypt.alg, (*crypt)->ops->name, - HOSTAP_CRYPT_ALG_NAME_LEN); - param->u.crypt.key_len = 0; - - memset(param->u.crypt.seq, 0, 8); - if ((*crypt)->ops->get_key) { - param->u.crypt.key_len = - (*crypt)->ops->get_key(param->u.crypt.key, - max_key_len, - param->u.crypt.seq, - (*crypt)->priv); - } - } - - if (sta_ptr) - hostap_handle_sta_release(sta_ptr); - - return 0; -} - - -static int prism2_ioctl_get_rid(local_info_t *local, - struct prism2_hostapd_param *param, - int param_len) -{ - int max_len, res; - - max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; - if (max_len < 0) - return -EINVAL; - - res = local->func->get_rid(local->dev, param->u.rid.rid, - param->u.rid.data, param->u.rid.len, 0); - if (res >= 0) { - param->u.rid.len = res; - return 0; - } - - return res; -} - - -static int prism2_ioctl_set_rid(local_info_t *local, - struct prism2_hostapd_param *param, - int param_len) -{ - int max_len; - - max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; - if (max_len < 0 || max_len < param->u.rid.len) - return -EINVAL; - - return local->func->set_rid(local->dev, param->u.rid.rid, - param->u.rid.data, param->u.rid.len); -} - - -static int prism2_ioctl_set_assoc_ap_addr(local_info_t *local, - struct prism2_hostapd_param *param, - int param_len) -{ - printk(KERN_DEBUG "%ssta: associated as client with AP %pM\n", - local->dev->name, param->sta_addr); - memcpy(local->assoc_ap_addr, param->sta_addr, ETH_ALEN); - return 0; -} - - -static int prism2_ioctl_siwgenie(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_point *data = &wrqu->data; - return prism2_set_genericelement(dev, extra, data->length); -} - - -static int prism2_ioctl_giwgenie(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct iw_point *data = &wrqu->data; - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - int len = local->generic_elem_len - 2; - - if (len <= 0 || local->generic_elem == NULL) { - data->length = 0; - return 0; - } - - if (data->length < len) - return -E2BIG; - - data->length = len; - memcpy(extra, local->generic_elem + 2, len); - - return 0; -} - - -static int prism2_ioctl_set_generic_element(local_info_t *local, - struct prism2_hostapd_param *param, - int param_len) -{ - int max_len, len; - - len = param->u.generic_elem.len; - max_len = param_len - PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN; - if (max_len < 0 || max_len < len) - return -EINVAL; - - return prism2_set_genericelement(local->dev, - param->u.generic_elem.data, len); -} - - -static int prism2_ioctl_siwmlme(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - struct iw_mlme *mlme = (struct iw_mlme *) extra; - __le16 reason; - - reason = cpu_to_le16(mlme->reason_code); - - switch (mlme->cmd) { - case IW_MLME_DEAUTH: - return prism2_sta_send_mgmt(local, mlme->addr.sa_data, - IEEE80211_STYPE_DEAUTH, - (u8 *) &reason, 2); - case IW_MLME_DISASSOC: - return prism2_sta_send_mgmt(local, mlme->addr.sa_data, - IEEE80211_STYPE_DISASSOC, - (u8 *) &reason, 2); - default: - return -EOPNOTSUPP; - } -} - - -static int prism2_ioctl_mlme(local_info_t *local, - struct prism2_hostapd_param *param) -{ - __le16 reason; - - reason = cpu_to_le16(param->u.mlme.reason_code); - switch (param->u.mlme.cmd) { - case MLME_STA_DEAUTH: - return prism2_sta_send_mgmt(local, param->sta_addr, - IEEE80211_STYPE_DEAUTH, - (u8 *) &reason, 2); - case MLME_STA_DISASSOC: - return prism2_sta_send_mgmt(local, param->sta_addr, - IEEE80211_STYPE_DISASSOC, - (u8 *) &reason, 2); - default: - return -EOPNOTSUPP; - } -} - - -static int prism2_ioctl_scan_req(local_info_t *local, - struct prism2_hostapd_param *param) -{ -#ifndef PRISM2_NO_STATION_MODES - if ((local->iw_mode != IW_MODE_INFRA && - local->iw_mode != IW_MODE_ADHOC) || - (local->sta_fw_ver < PRISM2_FW_VER(1,3,1))) - return -EOPNOTSUPP; - - if (!local->dev_enabled) - return -ENETDOWN; - - return prism2_request_hostscan(local->dev, param->u.scan_req.ssid, - param->u.scan_req.ssid_len); -#else /* PRISM2_NO_STATION_MODES */ - return -EOPNOTSUPP; -#endif /* PRISM2_NO_STATION_MODES */ -} - - -static int prism2_ioctl_priv_hostapd(local_info_t *local, struct iw_point *p) -{ - struct prism2_hostapd_param *param; - int ret = 0; - int ap_ioctl = 0; - - if (p->length < sizeof(struct prism2_hostapd_param) || - p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer) - return -EINVAL; - - param = memdup_user(p->pointer, p->length); - if (IS_ERR(param)) { - return PTR_ERR(param); - } - - switch (param->cmd) { - case PRISM2_SET_ENCRYPTION: - ret = prism2_ioctl_set_encryption(local, param, p->length); - break; - case PRISM2_GET_ENCRYPTION: - ret = prism2_ioctl_get_encryption(local, param, p->length); - break; - case PRISM2_HOSTAPD_GET_RID: - ret = prism2_ioctl_get_rid(local, param, p->length); - break; - case PRISM2_HOSTAPD_SET_RID: - ret = prism2_ioctl_set_rid(local, param, p->length); - break; - case PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR: - ret = prism2_ioctl_set_assoc_ap_addr(local, param, p->length); - break; - case PRISM2_HOSTAPD_SET_GENERIC_ELEMENT: - ret = prism2_ioctl_set_generic_element(local, param, - p->length); - break; - case PRISM2_HOSTAPD_MLME: - ret = prism2_ioctl_mlme(local, param); - break; - case PRISM2_HOSTAPD_SCAN_REQ: - ret = prism2_ioctl_scan_req(local, param); - break; - default: - ret = prism2_hostapd(local->ap, param); - ap_ioctl = 1; - break; - } - - if (ret == 1 || !ap_ioctl) { - if (copy_to_user(p->pointer, param, p->length)) { - ret = -EFAULT; - goto out; - } else if (ap_ioctl) - ret = 0; - } - - out: - kfree(param); - return ret; -} - - -static void prism2_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - - strscpy(info->driver, "hostap", sizeof(info->driver)); - snprintf(info->fw_version, sizeof(info->fw_version), - "%d.%d.%d", (local->sta_fw_ver >> 16) & 0xff, - (local->sta_fw_ver >> 8) & 0xff, - local->sta_fw_ver & 0xff); -} - -const struct ethtool_ops prism2_ethtool_ops = { - .get_drvinfo = prism2_get_drvinfo -}; - - -/* Structures to export the Wireless Handlers */ - -static const iw_handler prism2_handler[] = -{ - IW_HANDLER(SIOCGIWNAME, prism2_get_name), - IW_HANDLER(SIOCSIWFREQ, prism2_ioctl_siwfreq), - IW_HANDLER(SIOCGIWFREQ, prism2_ioctl_giwfreq), - IW_HANDLER(SIOCSIWMODE, prism2_ioctl_siwmode), - IW_HANDLER(SIOCGIWMODE, prism2_ioctl_giwmode), - IW_HANDLER(SIOCSIWSENS, prism2_ioctl_siwsens), - IW_HANDLER(SIOCGIWSENS, prism2_ioctl_giwsens), - IW_HANDLER(SIOCGIWRANGE, prism2_ioctl_giwrange), - IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy), - IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy), - IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy), - IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy), - IW_HANDLER(SIOCSIWAP, prism2_ioctl_siwap), - IW_HANDLER(SIOCGIWAP, prism2_ioctl_giwap), - IW_HANDLER(SIOCSIWMLME, prism2_ioctl_siwmlme), - IW_HANDLER(SIOCGIWAPLIST, prism2_ioctl_giwaplist), - IW_HANDLER(SIOCSIWSCAN, prism2_ioctl_siwscan), - IW_HANDLER(SIOCGIWSCAN, prism2_ioctl_giwscan), - IW_HANDLER(SIOCSIWESSID, prism2_ioctl_siwessid), - IW_HANDLER(SIOCGIWESSID, prism2_ioctl_giwessid), - IW_HANDLER(SIOCSIWNICKN, prism2_ioctl_siwnickn), - IW_HANDLER(SIOCGIWNICKN, prism2_ioctl_giwnickn), - IW_HANDLER(SIOCSIWRATE, prism2_ioctl_siwrate), - IW_HANDLER(SIOCGIWRATE, prism2_ioctl_giwrate), - IW_HANDLER(SIOCSIWRTS, prism2_ioctl_siwrts), - IW_HANDLER(SIOCGIWRTS, prism2_ioctl_giwrts), - IW_HANDLER(SIOCSIWFRAG, prism2_ioctl_siwfrag), - IW_HANDLER(SIOCGIWFRAG, prism2_ioctl_giwfrag), - IW_HANDLER(SIOCSIWTXPOW, prism2_ioctl_siwtxpow), - IW_HANDLER(SIOCGIWTXPOW, prism2_ioctl_giwtxpow), - IW_HANDLER(SIOCSIWRETRY, prism2_ioctl_siwretry), - IW_HANDLER(SIOCGIWRETRY, prism2_ioctl_giwretry), - IW_HANDLER(SIOCSIWENCODE, prism2_ioctl_siwencode), - IW_HANDLER(SIOCGIWENCODE, prism2_ioctl_giwencode), - IW_HANDLER(SIOCSIWPOWER, prism2_ioctl_siwpower), - IW_HANDLER(SIOCGIWPOWER, prism2_ioctl_giwpower), - IW_HANDLER(SIOCSIWGENIE, prism2_ioctl_siwgenie), - IW_HANDLER(SIOCGIWGENIE, prism2_ioctl_giwgenie), - IW_HANDLER(SIOCSIWAUTH, prism2_ioctl_siwauth), - IW_HANDLER(SIOCGIWAUTH, prism2_ioctl_giwauth), - IW_HANDLER(SIOCSIWENCODEEXT, prism2_ioctl_siwencodeext), - IW_HANDLER(SIOCGIWENCODEEXT, prism2_ioctl_giwencodeext), -}; - -static const iw_handler prism2_private_handler[] = -{ /* SIOCIWFIRSTPRIV + */ - prism2_ioctl_priv_prism2_param, /* 0 */ - prism2_ioctl_priv_get_prism2_param, /* 1 */ - prism2_ioctl_priv_writemif, /* 2 */ - prism2_ioctl_priv_readmif, /* 3 */ -}; - -const struct iw_handler_def hostap_iw_handler_def = -{ - .num_standard = ARRAY_SIZE(prism2_handler), - .num_private = ARRAY_SIZE(prism2_private_handler), - .num_private_args = ARRAY_SIZE(prism2_priv), - .standard = prism2_handler, - .private = prism2_private_handler, - .private_args = (struct iw_priv_args *) prism2_priv, - .get_wireless_stats = hostap_get_wireless_stats, -}; - - -/* Private ioctls that are not used with iwpriv; - * in SIOCDEVPRIVATE range */ -int hostap_siocdevprivate(struct net_device *dev, struct ifreq *ifr, - void __user *data, int cmd) -{ - struct iwreq *wrq = (struct iwreq *)ifr; - struct hostap_interface *iface; - local_info_t *local; - int ret = 0; - - iface = netdev_priv(dev); - local = iface->local; - - if (in_compat_syscall()) /* not implemented yet */ - return -EOPNOTSUPP; - - switch (cmd) { -#ifdef PRISM2_DOWNLOAD_SUPPORT - case PRISM2_IOCTL_DOWNLOAD: - if (!capable(CAP_NET_ADMIN)) ret = -EPERM; - else ret = prism2_ioctl_priv_download(local, &wrq->u.data); - break; -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - - case PRISM2_IOCTL_HOSTAPD: - if (!capable(CAP_NET_ADMIN)) ret = -EPERM; - else ret = prism2_ioctl_priv_hostapd(local, &wrq->u.data); - break; - - default: - ret = -EOPNOTSUPP; - break; - } - - return ret; -} diff --git a/drivers/net/wireless/intersil/hostap/hostap_main.c b/drivers/net/wireless/intersil/hostap/hostap_main.c deleted file mode 100644 index bf86ac26c2..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_main.c +++ /dev/null @@ -1,1123 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Host AP (software wireless LAN access point) driver for - * Intersil Prism2/2.5/3 - hostap.o module, common routines - * - * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen - * <j@w1.fi> - * Copyright (c) 2002-2005, Jouni Malinen <j@w1.fi> - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/proc_fs.h> -#include <linux/if_arp.h> -#include <linux/delay.h> -#include <linux/random.h> -#include <linux/workqueue.h> -#include <linux/kmod.h> -#include <linux/rtnetlink.h> -#include <linux/wireless.h> -#include <linux/etherdevice.h> -#include <net/net_namespace.h> -#include <net/iw_handler.h> -#include <net/lib80211.h> -#include <linux/uaccess.h> - -#include "hostap_wlan.h" -#include "hostap_80211.h" -#include "hostap_ap.h" -#include "hostap.h" - -MODULE_AUTHOR("Jouni Malinen"); -MODULE_DESCRIPTION("Host AP common routines"); -MODULE_LICENSE("GPL"); - -#define TX_TIMEOUT (2 * HZ) - -#define PRISM2_MAX_FRAME_SIZE 2304 -#define PRISM2_MIN_MTU 256 -/* FIX: */ -#define PRISM2_MAX_MTU (PRISM2_MAX_FRAME_SIZE - (6 /* LLC */ + 8 /* WEP */)) - - -struct net_device * hostap_add_interface(struct local_info *local, - int type, int rtnl_locked, - const char *prefix, - const char *name) -{ - struct net_device *dev, *mdev; - struct hostap_interface *iface; - int ret; - - dev = alloc_etherdev(sizeof(struct hostap_interface)); - if (dev == NULL) - return NULL; - - iface = netdev_priv(dev); - iface->dev = dev; - iface->local = local; - iface->type = type; - list_add(&iface->list, &local->hostap_interfaces); - - mdev = local->dev; - eth_hw_addr_inherit(dev, mdev); - dev->base_addr = mdev->base_addr; - dev->irq = mdev->irq; - dev->mem_start = mdev->mem_start; - dev->mem_end = mdev->mem_end; - - hostap_setup_dev(dev, local, type); - dev->needs_free_netdev = true; - - sprintf(dev->name, "%s%s", prefix, name); - if (!rtnl_locked) - rtnl_lock(); - - SET_NETDEV_DEV(dev, mdev->dev.parent); - ret = register_netdevice(dev); - - if (!rtnl_locked) - rtnl_unlock(); - - if (ret < 0) { - printk(KERN_WARNING "%s: failed to add new netdevice!\n", - dev->name); - free_netdev(dev); - return NULL; - } - - printk(KERN_DEBUG "%s: registered netdevice %s\n", - mdev->name, dev->name); - - return dev; -} - - -void hostap_remove_interface(struct net_device *dev, int rtnl_locked, - int remove_from_list) -{ - struct hostap_interface *iface; - - if (!dev) - return; - - iface = netdev_priv(dev); - - if (remove_from_list) { - list_del(&iface->list); - } - - if (dev == iface->local->ddev) - iface->local->ddev = NULL; - else if (dev == iface->local->apdev) - iface->local->apdev = NULL; - else if (dev == iface->local->stadev) - iface->local->stadev = NULL; - - if (rtnl_locked) - unregister_netdevice(dev); - else - unregister_netdev(dev); - - /* 'dev->needs_free_netdev = true' implies device data, including - * private data, will be freed when the device is removed */ -} - - -static inline int prism2_wds_special_addr(u8 *addr) -{ - if (addr[0] || addr[1] || addr[2] || addr[3] || addr[4] || addr[5]) - return 0; - - return 1; -} - - -int prism2_wds_add(local_info_t *local, u8 *remote_addr, - int rtnl_locked) -{ - struct net_device *dev; - struct list_head *ptr; - struct hostap_interface *iface, *empty, *match; - - empty = match = NULL; - read_lock_bh(&local->iface_lock); - list_for_each(ptr, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - if (iface->type != HOSTAP_INTERFACE_WDS) - continue; - - if (prism2_wds_special_addr(iface->u.wds.remote_addr)) - empty = iface; - else if (ether_addr_equal(iface->u.wds.remote_addr, remote_addr)) { - match = iface; - break; - } - } - if (!match && empty && !prism2_wds_special_addr(remote_addr)) { - /* take pre-allocated entry into use */ - memcpy(empty->u.wds.remote_addr, remote_addr, ETH_ALEN); - read_unlock_bh(&local->iface_lock); - printk(KERN_DEBUG "%s: using pre-allocated WDS netdevice %s\n", - local->dev->name, empty->dev->name); - return 0; - } - read_unlock_bh(&local->iface_lock); - - if (!prism2_wds_special_addr(remote_addr)) { - if (match) - return -EEXIST; - hostap_add_sta(local->ap, remote_addr); - } - - if (local->wds_connections >= local->wds_max_connections) - return -ENOBUFS; - - /* verify that there is room for wds# postfix in the interface name */ - if (strlen(local->dev->name) >= IFNAMSIZ - 5) { - printk(KERN_DEBUG "'%s' too long base device name\n", - local->dev->name); - return -EINVAL; - } - - dev = hostap_add_interface(local, HOSTAP_INTERFACE_WDS, rtnl_locked, - local->ddev->name, "wds%d"); - if (dev == NULL) - return -ENOMEM; - - iface = netdev_priv(dev); - memcpy(iface->u.wds.remote_addr, remote_addr, ETH_ALEN); - - local->wds_connections++; - - return 0; -} - - -int prism2_wds_del(local_info_t *local, u8 *remote_addr, - int rtnl_locked, int do_not_remove) -{ - unsigned long flags; - struct list_head *ptr; - struct hostap_interface *iface, *selected = NULL; - - write_lock_irqsave(&local->iface_lock, flags); - list_for_each(ptr, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - if (iface->type != HOSTAP_INTERFACE_WDS) - continue; - - if (ether_addr_equal(iface->u.wds.remote_addr, remote_addr)) { - selected = iface; - break; - } - } - if (selected && !do_not_remove) - list_del(&selected->list); - write_unlock_irqrestore(&local->iface_lock, flags); - - if (selected) { - if (do_not_remove) - eth_zero_addr(selected->u.wds.remote_addr); - else { - hostap_remove_interface(selected->dev, rtnl_locked, 0); - local->wds_connections--; - } - } - - return selected ? 0 : -ENODEV; -} - - -u16 hostap_tx_callback_register(local_info_t *local, - void (*func)(struct sk_buff *, int ok, void *), - void *data) -{ - unsigned long flags; - struct hostap_tx_callback_info *entry; - - entry = kmalloc(sizeof(*entry), GFP_KERNEL); - if (entry == NULL) - return 0; - - entry->func = func; - entry->data = data; - - spin_lock_irqsave(&local->lock, flags); - entry->idx = local->tx_callback ? local->tx_callback->idx + 1 : 1; - entry->next = local->tx_callback; - local->tx_callback = entry; - spin_unlock_irqrestore(&local->lock, flags); - - return entry->idx; -} - - -int hostap_tx_callback_unregister(local_info_t *local, u16 idx) -{ - unsigned long flags; - struct hostap_tx_callback_info *cb, *prev = NULL; - - spin_lock_irqsave(&local->lock, flags); - cb = local->tx_callback; - while (cb != NULL && cb->idx != idx) { - prev = cb; - cb = cb->next; - } - if (cb) { - if (prev == NULL) - local->tx_callback = cb->next; - else - prev->next = cb->next; - kfree(cb); - } - spin_unlock_irqrestore(&local->lock, flags); - - return cb ? 0 : -1; -} - - -/* val is in host byte order */ -int hostap_set_word(struct net_device *dev, int rid, u16 val) -{ - struct hostap_interface *iface; - __le16 tmp = cpu_to_le16(val); - iface = netdev_priv(dev); - return iface->local->func->set_rid(dev, rid, &tmp, 2); -} - - -int hostap_set_string(struct net_device *dev, int rid, const char *val) -{ - struct hostap_interface *iface; - char buf[MAX_SSID_LEN + 2]; - int len; - - iface = netdev_priv(dev); - len = strlen(val); - if (len > MAX_SSID_LEN) - return -1; - memset(buf, 0, sizeof(buf)); - buf[0] = len; /* little endian 16 bit word */ - memcpy(buf + 2, val, len); - - return iface->local->func->set_rid(dev, rid, &buf, MAX_SSID_LEN + 2); -} - - -u16 hostap_get_porttype(local_info_t *local) -{ - if (local->iw_mode == IW_MODE_ADHOC && local->pseudo_adhoc) - return HFA384X_PORTTYPE_PSEUDO_IBSS; - if (local->iw_mode == IW_MODE_ADHOC) - return HFA384X_PORTTYPE_IBSS; - if (local->iw_mode == IW_MODE_INFRA) - return HFA384X_PORTTYPE_BSS; - if (local->iw_mode == IW_MODE_REPEAT) - return HFA384X_PORTTYPE_WDS; - if (local->iw_mode == IW_MODE_MONITOR) - return HFA384X_PORTTYPE_PSEUDO_IBSS; - return HFA384X_PORTTYPE_HOSTAP; -} - - -int hostap_set_encryption(local_info_t *local) -{ - u16 val, old_val; - int i, keylen, len, idx; - char keybuf[WEP_KEY_LEN + 1]; - enum { NONE, WEP, OTHER } encrypt_type; - - idx = local->crypt_info.tx_keyidx; - if (local->crypt_info.crypt[idx] == NULL || - local->crypt_info.crypt[idx]->ops == NULL) - encrypt_type = NONE; - else if (strcmp(local->crypt_info.crypt[idx]->ops->name, "WEP") == 0) - encrypt_type = WEP; - else - encrypt_type = OTHER; - - if (local->func->get_rid(local->dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, - 1) < 0) { - printk(KERN_DEBUG "Could not read current WEP flags.\n"); - goto fail; - } - le16_to_cpus(&val); - old_val = val; - - if (encrypt_type != NONE || local->privacy_invoked) - val |= HFA384X_WEPFLAGS_PRIVACYINVOKED; - else - val &= ~HFA384X_WEPFLAGS_PRIVACYINVOKED; - - if (local->open_wep || encrypt_type == NONE || - ((local->ieee_802_1x || local->wpa) && local->host_decrypt)) - val &= ~HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; - else - val |= HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; - - if ((encrypt_type != NONE || local->privacy_invoked) && - (encrypt_type == OTHER || local->host_encrypt)) - val |= HFA384X_WEPFLAGS_HOSTENCRYPT; - else - val &= ~HFA384X_WEPFLAGS_HOSTENCRYPT; - if ((encrypt_type != NONE || local->privacy_invoked) && - (encrypt_type == OTHER || local->host_decrypt)) - val |= HFA384X_WEPFLAGS_HOSTDECRYPT; - else - val &= ~HFA384X_WEPFLAGS_HOSTDECRYPT; - - if (val != old_val && - hostap_set_word(local->dev, HFA384X_RID_CNFWEPFLAGS, val)) { - printk(KERN_DEBUG "Could not write new WEP flags (0x%x)\n", - val); - goto fail; - } - - if (encrypt_type != WEP) - return 0; - - /* 104-bit support seems to require that all the keys are set to the - * same keylen */ - keylen = 6; /* first 5 octets */ - len = local->crypt_info.crypt[idx]->ops->get_key(keybuf, sizeof(keybuf), NULL, - local->crypt_info.crypt[idx]->priv); - if (idx >= 0 && idx < WEP_KEYS && len > 5) - keylen = WEP_KEY_LEN + 1; /* first 13 octets */ - - for (i = 0; i < WEP_KEYS; i++) { - memset(keybuf, 0, sizeof(keybuf)); - if (local->crypt_info.crypt[i]) { - (void) local->crypt_info.crypt[i]->ops->get_key( - keybuf, sizeof(keybuf), - NULL, local->crypt_info.crypt[i]->priv); - } - if (local->func->set_rid(local->dev, - HFA384X_RID_CNFDEFAULTKEY0 + i, - keybuf, keylen)) { - printk(KERN_DEBUG "Could not set key %d (len=%d)\n", - i, keylen); - goto fail; - } - } - if (hostap_set_word(local->dev, HFA384X_RID_CNFWEPDEFAULTKEYID, idx)) { - printk(KERN_DEBUG "Could not set default keyid %d\n", idx); - goto fail; - } - - return 0; - - fail: - printk(KERN_DEBUG "%s: encryption setup failed\n", local->dev->name); - return -1; -} - - -int hostap_set_antsel(local_info_t *local) -{ - u16 val; - int ret = 0; - - if (local->antsel_tx != HOSTAP_ANTSEL_DO_NOT_TOUCH && - local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, - HFA386X_CR_TX_CONFIGURE, - NULL, &val) == 0) { - val &= ~(BIT(2) | BIT(1)); - switch (local->antsel_tx) { - case HOSTAP_ANTSEL_DIVERSITY: - val |= BIT(1); - break; - case HOSTAP_ANTSEL_LOW: - break; - case HOSTAP_ANTSEL_HIGH: - val |= BIT(2); - break; - } - - if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, - HFA386X_CR_TX_CONFIGURE, &val, NULL)) { - printk(KERN_INFO "%s: setting TX AntSel failed\n", - local->dev->name); - ret = -1; - } - } - - if (local->antsel_rx != HOSTAP_ANTSEL_DO_NOT_TOUCH && - local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, - HFA386X_CR_RX_CONFIGURE, - NULL, &val) == 0) { - val &= ~(BIT(1) | BIT(0)); - switch (local->antsel_rx) { - case HOSTAP_ANTSEL_DIVERSITY: - break; - case HOSTAP_ANTSEL_LOW: - val |= BIT(0); - break; - case HOSTAP_ANTSEL_HIGH: - val |= BIT(0) | BIT(1); - break; - } - - if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, - HFA386X_CR_RX_CONFIGURE, &val, NULL)) { - printk(KERN_INFO "%s: setting RX AntSel failed\n", - local->dev->name); - ret = -1; - } - } - - return ret; -} - - -int hostap_set_roaming(local_info_t *local) -{ - u16 val; - - switch (local->host_roaming) { - case 1: - val = HFA384X_ROAMING_HOST; - break; - case 2: - val = HFA384X_ROAMING_DISABLED; - break; - case 0: - default: - val = HFA384X_ROAMING_FIRMWARE; - break; - } - - return hostap_set_word(local->dev, HFA384X_RID_CNFROAMINGMODE, val); -} - - -int hostap_set_auth_algs(local_info_t *local) -{ - int val = local->auth_algs; - /* At least STA f/w v0.6.2 seems to have issues with cnfAuthentication - * set to include both Open and Shared Key flags. It tries to use - * Shared Key authentication in that case even if WEP keys are not - * configured.. STA f/w v0.7.6 is able to handle such configuration, - * but it is unknown when this was fixed between 0.6.2 .. 0.7.6. */ - if (local->sta_fw_ver < PRISM2_FW_VER(0,7,0) && - val != PRISM2_AUTH_OPEN && val != PRISM2_AUTH_SHARED_KEY) - val = PRISM2_AUTH_OPEN; - - if (hostap_set_word(local->dev, HFA384X_RID_CNFAUTHENTICATION, val)) { - printk(KERN_INFO "%s: cnfAuthentication setting to 0x%x " - "failed\n", local->dev->name, local->auth_algs); - return -EINVAL; - } - - return 0; -} - - -void hostap_dump_rx_header(const char *name, const struct hfa384x_rx_frame *rx) -{ - u16 status, fc; - - status = __le16_to_cpu(rx->status); - - printk(KERN_DEBUG "%s: RX status=0x%04x (port=%d, type=%d, " - "fcserr=%d) silence=%d signal=%d rate=%d rxflow=%d; " - "jiffies=%ld\n", - name, status, (status >> 8) & 0x07, status >> 13, status & 1, - rx->silence, rx->signal, rx->rate, rx->rxflow, jiffies); - - fc = __le16_to_cpu(rx->frame_control); - printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " - "data_len=%d%s%s\n", - fc, (fc & IEEE80211_FCTL_FTYPE) >> 2, - (fc & IEEE80211_FCTL_STYPE) >> 4, - __le16_to_cpu(rx->duration_id), __le16_to_cpu(rx->seq_ctrl), - __le16_to_cpu(rx->data_len), - fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", - fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); - - printk(KERN_DEBUG " A1=%pM A2=%pM A3=%pM A4=%pM\n", - rx->addr1, rx->addr2, rx->addr3, rx->addr4); - - printk(KERN_DEBUG " dst=%pM src=%pM len=%d\n", - rx->dst_addr, rx->src_addr, - __be16_to_cpu(rx->len)); -} - - -void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx) -{ - u16 fc; - - printk(KERN_DEBUG "%s: TX status=0x%04x retry_count=%d tx_rate=%d " - "tx_control=0x%04x; jiffies=%ld\n", - name, __le16_to_cpu(tx->status), tx->retry_count, tx->tx_rate, - __le16_to_cpu(tx->tx_control), jiffies); - - fc = __le16_to_cpu(tx->frame_control); - printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " - "data_len=%d%s%s\n", - fc, (fc & IEEE80211_FCTL_FTYPE) >> 2, - (fc & IEEE80211_FCTL_STYPE) >> 4, - __le16_to_cpu(tx->duration_id), __le16_to_cpu(tx->seq_ctrl), - __le16_to_cpu(tx->data_len), - fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", - fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); - - printk(KERN_DEBUG " A1=%pM A2=%pM A3=%pM A4=%pM\n", - tx->addr1, tx->addr2, tx->addr3, tx->addr4); - - printk(KERN_DEBUG " dst=%pM src=%pM len=%d\n", - tx->dst_addr, tx->src_addr, - __be16_to_cpu(tx->len)); -} - - -static int hostap_80211_header_parse(const struct sk_buff *skb, - unsigned char *haddr) -{ - memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */ - return ETH_ALEN; -} - - -int hostap_80211_get_hdrlen(__le16 fc) -{ - if (ieee80211_is_data(fc) && ieee80211_has_a4 (fc)) - return 30; /* Addr4 */ - else if (ieee80211_is_cts(fc) || ieee80211_is_ack(fc)) - return 10; - else if (ieee80211_is_ctl(fc)) - return 16; - - return 24; -} - - -static int prism2_close(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - - PDEBUG(DEBUG_FLOW, "%s: prism2_close\n", dev->name); - - iface = netdev_priv(dev); - local = iface->local; - - if (dev == local->ddev) { - prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING); - } -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - if (!local->hostapd && dev == local->dev && - (!local->func->card_present || local->func->card_present(local)) && - local->hw_ready && local->ap && local->iw_mode == IW_MODE_MASTER) - hostap_deauth_all_stas(dev, local->ap, 1); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - if (dev == local->dev) { - local->func->hw_shutdown(dev, HOSTAP_HW_ENABLE_CMDCOMPL); - } - - if (netif_running(dev)) { - netif_stop_queue(dev); - netif_device_detach(dev); - } - - cancel_work_sync(&local->reset_queue); - cancel_work_sync(&local->set_multicast_list_queue); - cancel_work_sync(&local->set_tim_queue); -#ifndef PRISM2_NO_STATION_MODES - cancel_work_sync(&local->info_queue); -#endif - cancel_work_sync(&local->comms_qual_update); - - module_put(local->hw_module); - - local->num_dev_open--; - - if (dev != local->dev && local->dev->flags & IFF_UP && - local->master_dev_auto_open && local->num_dev_open == 1) { - /* Close master radio interface automatically if it was also - * opened automatically and we are now closing the last - * remaining non-master device. */ - dev_close(local->dev); - } - - return 0; -} - - -static int prism2_open(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - - PDEBUG(DEBUG_FLOW, "%s: prism2_open\n", dev->name); - - iface = netdev_priv(dev); - local = iface->local; - - if (local->no_pri) { - printk(KERN_DEBUG "%s: could not set interface UP - no PRI " - "f/w\n", dev->name); - return -ENODEV; - } - - if ((local->func->card_present && !local->func->card_present(local)) || - local->hw_downloading) - return -ENODEV; - - if (!try_module_get(local->hw_module)) - return -ENODEV; - local->num_dev_open++; - - if (!local->dev_enabled && local->func->hw_enable(dev, 1)) { - printk(KERN_WARNING "%s: could not enable MAC port\n", - dev->name); - prism2_close(dev); - return -ENODEV; - } - if (!local->dev_enabled) - prism2_callback(local, PRISM2_CALLBACK_ENABLE); - local->dev_enabled = 1; - - if (dev != local->dev && !(local->dev->flags & IFF_UP)) { - /* Master radio interface is needed for all operation, so open - * it automatically when any virtual net_device is opened. */ - local->master_dev_auto_open = 1; - dev_open(local->dev, NULL); - } - - netif_device_attach(dev); - netif_start_queue(dev); - - return 0; -} - - -static int prism2_set_mac_address(struct net_device *dev, void *p) -{ - struct hostap_interface *iface; - local_info_t *local; - struct list_head *ptr; - struct sockaddr *addr = p; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->set_rid(dev, HFA384X_RID_CNFOWNMACADDR, addr->sa_data, - ETH_ALEN) < 0 || local->func->reset_port(dev)) - return -EINVAL; - - read_lock_bh(&local->iface_lock); - list_for_each(ptr, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - eth_hw_addr_set(iface->dev, addr->sa_data); - } - eth_hw_addr_set(local->dev, addr->sa_data); - read_unlock_bh(&local->iface_lock); - - return 0; -} - - -/* TODO: to be further implemented as soon as Prism2 fully supports - * GroupAddresses and correct documentation is available */ -void hostap_set_multicast_list_queue(struct work_struct *work) -{ - local_info_t *local = - container_of(work, local_info_t, set_multicast_list_queue); - struct net_device *dev = local->dev; - - if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, - local->is_promisc)) { - printk(KERN_INFO "%s: %sabling promiscuous mode failed\n", - dev->name, local->is_promisc ? "en" : "dis"); - } -} - - -static void hostap_set_multicast_list(struct net_device *dev) -{ -#if 0 - /* FIX: promiscuous mode seems to be causing a lot of problems with - * some station firmware versions (FCSErr frames, invalid MACPort, etc. - * corrupted incoming frames). This code is now commented out while the - * problems are investigated. */ - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - if ((dev->flags & IFF_ALLMULTI) || (dev->flags & IFF_PROMISC)) { - local->is_promisc = 1; - } else { - local->is_promisc = 0; - } - - schedule_work(&local->set_multicast_list_queue); -#endif -} - - -static void prism2_tx_timeout(struct net_device *dev, unsigned int txqueue) -{ - struct hostap_interface *iface; - local_info_t *local; - struct hfa384x_regs regs; - - iface = netdev_priv(dev); - local = iface->local; - - printk(KERN_WARNING "%s Tx timed out! Resetting card\n", dev->name); - netif_stop_queue(local->dev); - - local->func->read_regs(dev, ®s); - printk(KERN_DEBUG "%s: CMD=%04x EVSTAT=%04x " - "OFFSET0=%04x OFFSET1=%04x SWSUPPORT0=%04x\n", - dev->name, regs.cmd, regs.evstat, regs.offset0, regs.offset1, - regs.swsupport0); - - local->func->schedule_reset(local); -} - -const struct header_ops hostap_80211_ops = { - .create = eth_header, - .cache = eth_header_cache, - .cache_update = eth_header_cache_update, - .parse = hostap_80211_header_parse, -}; -EXPORT_SYMBOL(hostap_80211_ops); - - -static const struct net_device_ops hostap_netdev_ops = { - .ndo_start_xmit = hostap_data_start_xmit, - - .ndo_open = prism2_open, - .ndo_stop = prism2_close, - .ndo_siocdevprivate = hostap_siocdevprivate, - .ndo_set_mac_address = prism2_set_mac_address, - .ndo_set_rx_mode = hostap_set_multicast_list, - .ndo_tx_timeout = prism2_tx_timeout, - .ndo_validate_addr = eth_validate_addr, -}; - -static const struct net_device_ops hostap_mgmt_netdev_ops = { - .ndo_start_xmit = hostap_mgmt_start_xmit, - - .ndo_open = prism2_open, - .ndo_stop = prism2_close, - .ndo_siocdevprivate = hostap_siocdevprivate, - .ndo_set_mac_address = prism2_set_mac_address, - .ndo_set_rx_mode = hostap_set_multicast_list, - .ndo_tx_timeout = prism2_tx_timeout, - .ndo_validate_addr = eth_validate_addr, -}; - -static const struct net_device_ops hostap_master_ops = { - .ndo_start_xmit = hostap_master_start_xmit, - - .ndo_open = prism2_open, - .ndo_stop = prism2_close, - .ndo_siocdevprivate = hostap_siocdevprivate, - .ndo_set_mac_address = prism2_set_mac_address, - .ndo_set_rx_mode = hostap_set_multicast_list, - .ndo_tx_timeout = prism2_tx_timeout, - .ndo_validate_addr = eth_validate_addr, -}; - -void hostap_setup_dev(struct net_device *dev, local_info_t *local, - int type) -{ - struct hostap_interface *iface; - - iface = netdev_priv(dev); - ether_setup(dev); - dev->min_mtu = PRISM2_MIN_MTU; - dev->max_mtu = PRISM2_MAX_MTU; - dev->priv_flags &= ~IFF_TX_SKB_SHARING; - - /* kernel callbacks */ - if (iface) { - /* Currently, we point to the proper spy_data only on - * the main_dev. This could be fixed. Jean II */ - iface->wireless_data.spy_data = &iface->spy_data; - dev->wireless_data = &iface->wireless_data; - } - dev->wireless_handlers = &hostap_iw_handler_def; - dev->watchdog_timeo = TX_TIMEOUT; - - switch(type) { - case HOSTAP_INTERFACE_AP: - dev->priv_flags |= IFF_NO_QUEUE; /* use main radio device queue */ - dev->netdev_ops = &hostap_mgmt_netdev_ops; - dev->type = ARPHRD_IEEE80211; - dev->header_ops = &hostap_80211_ops; - break; - case HOSTAP_INTERFACE_MASTER: - dev->netdev_ops = &hostap_master_ops; - break; - default: - dev->priv_flags |= IFF_NO_QUEUE; /* use main radio device queue */ - dev->netdev_ops = &hostap_netdev_ops; - } - - dev->mtu = local->mtu; - - - dev->ethtool_ops = &prism2_ethtool_ops; - -} - -static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked) -{ - struct net_device *dev = local->dev; - - if (local->apdev) - return -EEXIST; - - printk(KERN_DEBUG "%s: enabling hostapd mode\n", dev->name); - - local->apdev = hostap_add_interface(local, HOSTAP_INTERFACE_AP, - rtnl_locked, local->ddev->name, - "ap"); - if (local->apdev == NULL) - return -ENOMEM; - - return 0; -} - - -static int hostap_disable_hostapd(local_info_t *local, int rtnl_locked) -{ - struct net_device *dev = local->dev; - - printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); - - hostap_remove_interface(local->apdev, rtnl_locked, 1); - local->apdev = NULL; - - return 0; -} - - -static int hostap_enable_hostapd_sta(local_info_t *local, int rtnl_locked) -{ - struct net_device *dev = local->dev; - - if (local->stadev) - return -EEXIST; - - printk(KERN_DEBUG "%s: enabling hostapd STA mode\n", dev->name); - - local->stadev = hostap_add_interface(local, HOSTAP_INTERFACE_STA, - rtnl_locked, local->ddev->name, - "sta"); - if (local->stadev == NULL) - return -ENOMEM; - - return 0; -} - - -static int hostap_disable_hostapd_sta(local_info_t *local, int rtnl_locked) -{ - struct net_device *dev = local->dev; - - printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); - - hostap_remove_interface(local->stadev, rtnl_locked, 1); - local->stadev = NULL; - - return 0; -} - - -int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked) -{ - int ret; - - if (val < 0 || val > 1) - return -EINVAL; - - if (local->hostapd == val) - return 0; - - if (val) { - ret = hostap_enable_hostapd(local, rtnl_locked); - if (ret == 0) - local->hostapd = 1; - } else { - local->hostapd = 0; - ret = hostap_disable_hostapd(local, rtnl_locked); - if (ret != 0) - local->hostapd = 1; - } - - return ret; -} - - -int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked) -{ - int ret; - - if (val < 0 || val > 1) - return -EINVAL; - - if (local->hostapd_sta == val) - return 0; - - if (val) { - ret = hostap_enable_hostapd_sta(local, rtnl_locked); - if (ret == 0) - local->hostapd_sta = 1; - } else { - local->hostapd_sta = 0; - ret = hostap_disable_hostapd_sta(local, rtnl_locked); - if (ret != 0) - local->hostapd_sta = 1; - } - - - return ret; -} - - -int prism2_update_comms_qual(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - int ret = 0; - struct hfa384x_comms_quality sq; - - iface = netdev_priv(dev); - local = iface->local; - if (!local->sta_fw_ver) - ret = -1; - else if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { - if (local->func->get_rid(local->dev, - HFA384X_RID_DBMCOMMSQUALITY, - &sq, sizeof(sq), 1) >= 0) { - local->comms_qual = (s16) le16_to_cpu(sq.comm_qual); - local->avg_signal = (s16) le16_to_cpu(sq.signal_level); - local->avg_noise = (s16) le16_to_cpu(sq.noise_level); - local->last_comms_qual_update = jiffies; - } else - ret = -1; - } else { - if (local->func->get_rid(local->dev, HFA384X_RID_COMMSQUALITY, - &sq, sizeof(sq), 1) >= 0) { - local->comms_qual = le16_to_cpu(sq.comm_qual); - local->avg_signal = HFA384X_LEVEL_TO_dBm( - le16_to_cpu(sq.signal_level)); - local->avg_noise = HFA384X_LEVEL_TO_dBm( - le16_to_cpu(sq.noise_level)); - local->last_comms_qual_update = jiffies; - } else - ret = -1; - } - - return ret; -} - - -int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype, - u8 *body, size_t bodylen) -{ - struct sk_buff *skb; - struct hostap_ieee80211_mgmt *mgmt; - struct hostap_skb_tx_data *meta; - struct net_device *dev = local->dev; - - skb = dev_alloc_skb(IEEE80211_MGMT_HDR_LEN + bodylen); - if (skb == NULL) - return -ENOMEM; - - mgmt = skb_put_zero(skb, IEEE80211_MGMT_HDR_LEN); - mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype); - memcpy(mgmt->da, dst, ETH_ALEN); - memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN); - memcpy(mgmt->bssid, dst, ETH_ALEN); - if (body) - skb_put_data(skb, body, bodylen); - - meta = (struct hostap_skb_tx_data *) skb->cb; - memset(meta, 0, sizeof(*meta)); - meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; - meta->iface = netdev_priv(dev); - - skb->dev = dev; - skb_reset_mac_header(skb); - skb_reset_network_header(skb); - dev_queue_xmit(skb); - - return 0; -} - - -int prism2_sta_deauth(local_info_t *local, u16 reason) -{ - union iwreq_data wrqu; - int ret; - __le16 val = cpu_to_le16(reason); - - if (local->iw_mode != IW_MODE_INFRA || - is_zero_ether_addr(local->bssid) || - ether_addr_equal(local->bssid, "\x44\x44\x44\x44\x44\x44")) - return 0; - - ret = prism2_sta_send_mgmt(local, local->bssid, IEEE80211_STYPE_DEAUTH, - (u8 *) &val, 2); - eth_zero_addr(wrqu.ap_addr.sa_data); - wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); - return ret; -} - - -struct proc_dir_entry *hostap_proc; - -static int __init hostap_init(void) -{ - if (init_net.proc_net != NULL) { - hostap_proc = proc_mkdir("hostap", init_net.proc_net); - if (!hostap_proc) - printk(KERN_WARNING "Failed to mkdir " - "/proc/net/hostap\n"); - } else - hostap_proc = NULL; - - return 0; -} - - -static void __exit hostap_exit(void) -{ - if (hostap_proc != NULL) { - hostap_proc = NULL; - remove_proc_entry("hostap", init_net.proc_net); - } -} - - -EXPORT_SYMBOL(hostap_set_word); -EXPORT_SYMBOL(hostap_set_string); -EXPORT_SYMBOL(hostap_get_porttype); -EXPORT_SYMBOL(hostap_set_encryption); -EXPORT_SYMBOL(hostap_set_antsel); -EXPORT_SYMBOL(hostap_set_roaming); -EXPORT_SYMBOL(hostap_set_auth_algs); -EXPORT_SYMBOL(hostap_dump_rx_header); -EXPORT_SYMBOL(hostap_dump_tx_header); -EXPORT_SYMBOL(hostap_80211_get_hdrlen); -EXPORT_SYMBOL(hostap_setup_dev); -EXPORT_SYMBOL(hostap_set_multicast_list_queue); -EXPORT_SYMBOL(hostap_set_hostapd); -EXPORT_SYMBOL(hostap_set_hostapd_sta); -EXPORT_SYMBOL(hostap_add_interface); -EXPORT_SYMBOL(hostap_remove_interface); -EXPORT_SYMBOL(prism2_update_comms_qual); - -module_init(hostap_init); -module_exit(hostap_exit); diff --git a/drivers/net/wireless/intersil/hostap/hostap_pci.c b/drivers/net/wireless/intersil/hostap/hostap_pci.c deleted file mode 100644 index 52d77506ef..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_pci.c +++ /dev/null @@ -1,445 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#define PRISM2_PCI - -/* Host AP driver's support for Intersil Prism2.5 PCI cards is based on - * driver patches from Reyk Floeter <reyk@vantronix.net> and - * Andy Warner <andyw@pobox.com> */ - -#include <linux/module.h> -#include <linux/if.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/slab.h> -#include <linux/workqueue.h> -#include <linux/wireless.h> -#include <net/iw_handler.h> - -#include <linux/ioport.h> -#include <linux/pci.h> -#include <asm/io.h> - -#include "hostap_wlan.h" - - -static char *dev_info = "hostap_pci"; - - -MODULE_AUTHOR("Jouni Malinen"); -MODULE_DESCRIPTION("Support for Intersil Prism2.5-based 802.11 wireless LAN " - "PCI cards."); -MODULE_LICENSE("GPL"); - - -/* struct local_info::hw_priv */ -struct hostap_pci_priv { - void __iomem *mem_start; -}; - - -/* FIX: do we need mb/wmb/rmb with memory operations? */ - - -static const struct pci_device_id prism2_pci_id_table[] = { - /* Intersil Prism3 ISL3872 11Mb/s WLAN Controller */ - { 0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID }, - /* Intersil Prism2.5 ISL3874 11Mb/s WLAN Controller */ - { 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID }, - /* Samsung MagicLAN SWL-2210P */ - { 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID }, - { 0 } -}; - - -#ifdef PRISM2_IO_DEBUG - -static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) -{ - struct hostap_interface *iface; - struct hostap_pci_priv *hw_priv; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - hw_priv = local->hw_priv; - - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); - writeb(v, hw_priv->mem_start + a); - spin_unlock_irqrestore(&local->lock, flags); -} - -static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) -{ - struct hostap_interface *iface; - struct hostap_pci_priv *hw_priv; - local_info_t *local; - unsigned long flags; - u8 v; - - iface = netdev_priv(dev); - local = iface->local; - hw_priv = local->hw_priv; - - spin_lock_irqsave(&local->lock, flags); - v = readb(hw_priv->mem_start + a); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); - spin_unlock_irqrestore(&local->lock, flags); - return v; -} - -static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) -{ - struct hostap_interface *iface; - struct hostap_pci_priv *hw_priv; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - hw_priv = local->hw_priv; - - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); - writew(v, hw_priv->mem_start + a); - spin_unlock_irqrestore(&local->lock, flags); -} - -static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) -{ - struct hostap_interface *iface; - struct hostap_pci_priv *hw_priv; - local_info_t *local; - unsigned long flags; - u16 v; - - iface = netdev_priv(dev); - local = iface->local; - hw_priv = local->hw_priv; - - spin_lock_irqsave(&local->lock, flags); - v = readw(hw_priv->mem_start + a); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); - spin_unlock_irqrestore(&local->lock, flags); - return v; -} - -#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) -#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) -#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) -#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) -#define HFA384X_OUTW_DATA(v,a) hfa384x_outw_debug(dev, (a), le16_to_cpu((v))) -#define HFA384X_INW_DATA(a) cpu_to_le16(hfa384x_inw_debug(dev, (a))) - -#else /* PRISM2_IO_DEBUG */ - -static inline void hfa384x_outb(struct net_device *dev, int a, u8 v) -{ - struct hostap_interface *iface; - struct hostap_pci_priv *hw_priv; - iface = netdev_priv(dev); - hw_priv = iface->local->hw_priv; - writeb(v, hw_priv->mem_start + a); -} - -static inline u8 hfa384x_inb(struct net_device *dev, int a) -{ - struct hostap_interface *iface; - struct hostap_pci_priv *hw_priv; - iface = netdev_priv(dev); - hw_priv = iface->local->hw_priv; - return readb(hw_priv->mem_start + a); -} - -static inline void hfa384x_outw(struct net_device *dev, int a, u16 v) -{ - struct hostap_interface *iface; - struct hostap_pci_priv *hw_priv; - iface = netdev_priv(dev); - hw_priv = iface->local->hw_priv; - writew(v, hw_priv->mem_start + a); -} - -static inline u16 hfa384x_inw(struct net_device *dev, int a) -{ - struct hostap_interface *iface; - struct hostap_pci_priv *hw_priv; - iface = netdev_priv(dev); - hw_priv = iface->local->hw_priv; - return readw(hw_priv->mem_start + a); -} - -#define HFA384X_OUTB(v,a) hfa384x_outb(dev, (a), (v)) -#define HFA384X_INB(a) hfa384x_inb(dev, (a)) -#define HFA384X_OUTW(v,a) hfa384x_outw(dev, (a), (v)) -#define HFA384X_INW(a) hfa384x_inw(dev, (a)) -#define HFA384X_OUTW_DATA(v,a) hfa384x_outw(dev, (a), le16_to_cpu((v))) -#define HFA384X_INW_DATA(a) cpu_to_le16(hfa384x_inw(dev, (a))) - -#endif /* PRISM2_IO_DEBUG */ - - -static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, - int len) -{ - u16 d_off; - __le16 *pos; - - d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; - pos = (__le16 *) buf; - - for ( ; len > 1; len -= 2) - *pos++ = HFA384X_INW_DATA(d_off); - - if (len & 1) - *((char *) pos) = HFA384X_INB(d_off); - - return 0; -} - - -static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) -{ - u16 d_off; - __le16 *pos; - - d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; - pos = (__le16 *) buf; - - for ( ; len > 1; len -= 2) - HFA384X_OUTW_DATA(*pos++, d_off); - - if (len & 1) - HFA384X_OUTB(*((char *) pos), d_off); - - return 0; -} - - -/* FIX: This might change at some point.. */ -#include "hostap_hw.c" - -static void prism2_pci_cor_sreset(local_info_t *local) -{ - struct net_device *dev = local->dev; - u16 reg; - - reg = HFA384X_INB(HFA384X_PCICOR_OFF); - printk(KERN_DEBUG "%s: Original COR value: 0x%0x\n", dev->name, reg); - - /* linux-wlan-ng uses extremely long hold and settle times for - * COR sreset. A comment in the driver code mentions that the long - * delays appear to be necessary. However, at least IBM 22P6901 seems - * to work fine with shorter delays. - * - * Longer delays can be configured by uncommenting following line: */ -/* #define PRISM2_PCI_USE_LONG_DELAYS */ - -#ifdef PRISM2_PCI_USE_LONG_DELAYS - int i; - - HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF); - mdelay(250); - - HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF); - mdelay(500); - - /* Wait for f/w to complete initialization (CMD:BUSY == 0) */ - i = 2000000 / 10; - while ((HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) && --i) - udelay(10); - -#else /* PRISM2_PCI_USE_LONG_DELAYS */ - - HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF); - mdelay(2); - HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF); - mdelay(2); - -#endif /* PRISM2_PCI_USE_LONG_DELAYS */ - - if (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) { - printk(KERN_DEBUG "%s: COR sreset timeout\n", dev->name); - } -} - - -static void prism2_pci_genesis_reset(local_info_t *local, int hcr) -{ - struct net_device *dev = local->dev; - - HFA384X_OUTW(0x00C5, HFA384X_PCICOR_OFF); - mdelay(10); - HFA384X_OUTW(hcr, HFA384X_PCIHCR_OFF); - mdelay(10); - HFA384X_OUTW(0x0045, HFA384X_PCICOR_OFF); - mdelay(10); -} - - -static struct prism2_helper_functions prism2_pci_funcs = -{ - .card_present = NULL, - .cor_sreset = prism2_pci_cor_sreset, - .genesis_reset = prism2_pci_genesis_reset, - .hw_type = HOSTAP_HW_PCI, -}; - - -static int prism2_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - unsigned long phymem; - void __iomem *mem = NULL; - local_info_t *local = NULL; - struct net_device *dev = NULL; - static int cards_found /* = 0 */; - int irq_registered = 0; - struct hostap_interface *iface; - struct hostap_pci_priv *hw_priv; - - hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL); - if (hw_priv == NULL) - return -ENOMEM; - - if (pci_enable_device(pdev)) - goto err_out_free; - - phymem = pci_resource_start(pdev, 0); - - if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "Prism2")) { - printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n"); - goto err_out_disable; - } - - mem = pci_ioremap_bar(pdev, 0); - if (mem == NULL) { - printk(KERN_ERR "prism2: Cannot remap PCI memory region\n") ; - goto fail; - } - - dev = prism2_init_local_data(&prism2_pci_funcs, cards_found, - &pdev->dev); - if (dev == NULL) - goto fail; - iface = netdev_priv(dev); - local = iface->local; - local->hw_priv = hw_priv; - cards_found++; - - dev->irq = pdev->irq; - hw_priv->mem_start = mem; - dev->base_addr = (unsigned long) mem; - - prism2_pci_cor_sreset(local); - - pci_set_drvdata(pdev, dev); - - if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name, - dev)) { - printk(KERN_WARNING "%s: request_irq failed\n", dev->name); - goto fail; - } else - irq_registered = 1; - - if (!local->pri_only && prism2_hw_config(dev, 1)) { - printk(KERN_DEBUG "%s: hardware initialization failed\n", - dev_info); - goto fail; - } - - printk(KERN_INFO "%s: Intersil Prism2.5 PCI: " - "mem=0x%lx, irq=%d\n", dev->name, phymem, dev->irq); - - return hostap_hw_ready(dev); - - fail: - if (irq_registered && dev) - free_irq(dev->irq, dev); - - if (mem) - iounmap(mem); - - release_mem_region(phymem, pci_resource_len(pdev, 0)); - - err_out_disable: - pci_disable_device(pdev); - prism2_free_local_data(dev); - - err_out_free: - kfree(hw_priv); - - return -ENODEV; -} - - -static void prism2_pci_remove(struct pci_dev *pdev) -{ - struct net_device *dev; - struct hostap_interface *iface; - void __iomem *mem_start; - struct hostap_pci_priv *hw_priv; - - dev = pci_get_drvdata(pdev); - iface = netdev_priv(dev); - hw_priv = iface->local->hw_priv; - - /* Reset the hardware, and ensure interrupts are disabled. */ - prism2_pci_cor_sreset(iface->local); - hfa384x_disable_interrupts(dev); - - if (dev->irq) - free_irq(dev->irq, dev); - - mem_start = hw_priv->mem_start; - prism2_free_local_data(dev); - kfree(hw_priv); - - iounmap(mem_start); - - release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - pci_disable_device(pdev); -} - -static int __maybe_unused prism2_pci_suspend(struct device *dev_d) -{ - struct net_device *dev = dev_get_drvdata(dev_d); - - if (netif_running(dev)) { - netif_stop_queue(dev); - netif_device_detach(dev); - } - prism2_suspend(dev); - - return 0; -} - -static int __maybe_unused prism2_pci_resume(struct device *dev_d) -{ - struct net_device *dev = dev_get_drvdata(dev_d); - - prism2_hw_config(dev, 0); - if (netif_running(dev)) { - netif_device_attach(dev); - netif_start_queue(dev); - } - - return 0; -} - -MODULE_DEVICE_TABLE(pci, prism2_pci_id_table); - -static SIMPLE_DEV_PM_OPS(prism2_pci_pm_ops, - prism2_pci_suspend, - prism2_pci_resume); - -static struct pci_driver prism2_pci_driver = { - .name = "hostap_pci", - .id_table = prism2_pci_id_table, - .probe = prism2_pci_probe, - .remove = prism2_pci_remove, - .driver.pm = &prism2_pci_pm_ops, -}; - -module_pci_driver(prism2_pci_driver); diff --git a/drivers/net/wireless/intersil/hostap/hostap_plx.c b/drivers/net/wireless/intersil/hostap/hostap_plx.c deleted file mode 100644 index 58247290fc..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_plx.c +++ /dev/null @@ -1,617 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#define PRISM2_PLX - -/* Host AP driver's support for PC Cards on PCI adapters using PLX9052 is - * based on: - * - Host AP driver patch from james@madingley.org - * - linux-wlan-ng driver, Copyright (C) AbsoluteValue Systems, Inc. - */ - - -#include <linux/module.h> -#include <linux/if.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/slab.h> -#include <linux/workqueue.h> -#include <linux/wireless.h> -#include <net/iw_handler.h> - -#include <linux/ioport.h> -#include <linux/pci.h> -#include <asm/io.h> - -#include "hostap_wlan.h" - - -static char *dev_info = "hostap_plx"; - - -MODULE_AUTHOR("Jouni Malinen"); -MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN " - "cards (PLX)."); -MODULE_LICENSE("GPL"); - - -static int ignore_cis; -module_param(ignore_cis, int, 0444); -MODULE_PARM_DESC(ignore_cis, "Do not verify manfid information in CIS"); - - -/* struct local_info::hw_priv */ -struct hostap_plx_priv { - void __iomem *attr_mem; - unsigned int cor_offset; -}; - - -#define PLX_MIN_ATTR_LEN 512 /* at least 2 x 256 is needed for CIS */ -#define COR_SRESET 0x80 -#define COR_LEVLREQ 0x40 -#define COR_ENABLE_FUNC 0x01 -/* PCI Configuration Registers */ -#define PLX_PCIIPR 0x3d /* PCI Interrupt Pin */ -/* Local Configuration Registers */ -#define PLX_INTCSR 0x4c /* Interrupt Control/Status Register */ -#define PLX_INTCSR_PCI_INTEN BIT(6) /* PCI Interrupt Enable */ -#define PLX_CNTRL 0x50 -#define PLX_CNTRL_SERIAL_EEPROM_PRESENT BIT(28) - - -#define PLXDEV(vendor,dev,str) { vendor, dev, PCI_ANY_ID, PCI_ANY_ID } - -static const struct pci_device_id prism2_plx_id_table[] = { - PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"), - PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"), - PLXDEV(0x126c, 0x8030, "Nortel emobility"), - PLXDEV(0x1562, 0x0001, "Symbol LA-4123"), - PLXDEV(0x1385, 0x4100, "Netgear MA301"), - PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"), - PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"), - PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"), - PLXDEV(0x16ab, 0x1100, "Global Sun Tech GL24110P"), - PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"), - PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"), - PLXDEV(0x16ab, 0x1103, "Longshine 8031"), - PLXDEV(0x16ec, 0x3685, "US Robotics USR2415"), - PLXDEV(0xec80, 0xec00, "Belkin F5D6000"), - { 0 } -}; - - -/* Array of known Prism2/2.5 PC Card manufactured ids. If your card's manfid - * is not listed here, you will need to add it here to get the driver - * initialized. */ -static struct prism2_plx_manfid { - u16 manfid1, manfid2; -} prism2_plx_known_manfids[] = { - { 0x000b, 0x7110 } /* D-Link DWL-650 Rev. P1 */, - { 0x000b, 0x7300 } /* Philips 802.11b WLAN PCMCIA */, - { 0x0101, 0x0777 } /* 3Com AirConnect PCI 777A */, - { 0x0126, 0x8000 } /* Proxim RangeLAN */, - { 0x0138, 0x0002 } /* Compaq WL100 */, - { 0x0156, 0x0002 } /* Intersil Prism II Ref. Design (and others) */, - { 0x026f, 0x030b } /* Buffalo WLI-CF-S11G */, - { 0x0274, 0x1612 } /* Linksys WPC11 Ver 2.5 */, - { 0x0274, 0x1613 } /* Linksys WPC11 Ver 3 */, - { 0x028a, 0x0002 } /* D-Link DRC-650 */, - { 0x0250, 0x0002 } /* Samsung SWL2000-N */, - { 0xc250, 0x0002 } /* EMTAC A2424i */, - { 0xd601, 0x0002 } /* Z-Com XI300 */, - { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */, - { 0, 0} -}; - - -#ifdef PRISM2_IO_DEBUG - -static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); - outb(v, dev->base_addr + a); - spin_unlock_irqrestore(&local->lock, flags); -} - -static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - u8 v; - - iface = netdev_priv(dev); - local = iface->local; - - spin_lock_irqsave(&local->lock, flags); - v = inb(dev->base_addr + a); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); - spin_unlock_irqrestore(&local->lock, flags); - return v; -} - -static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); - outw(v, dev->base_addr + a); - spin_unlock_irqrestore(&local->lock, flags); -} - -static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - u16 v; - - iface = netdev_priv(dev); - local = iface->local; - - spin_lock_irqsave(&local->lock, flags); - v = inw(dev->base_addr + a); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); - spin_unlock_irqrestore(&local->lock, flags); - return v; -} - -static inline void hfa384x_outsw_debug(struct net_device *dev, int a, - u8 *buf, int wc) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc); - outsw(dev->base_addr + a, buf, wc); - spin_unlock_irqrestore(&local->lock, flags); -} - -static inline void hfa384x_insw_debug(struct net_device *dev, int a, - u8 *buf, int wc) -{ - struct hostap_interface *iface; - local_info_t *local; - unsigned long flags; - - iface = netdev_priv(dev); - local = iface->local; - - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc); - insw(dev->base_addr + a, buf, wc); - spin_unlock_irqrestore(&local->lock, flags); -} - -#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) -#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) -#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) -#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) -#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc)) -#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc)) - -#else /* PRISM2_IO_DEBUG */ - -#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a)) -#define HFA384X_INB(a) inb(dev->base_addr + (a)) -#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a)) -#define HFA384X_INW(a) inw(dev->base_addr + (a)) -#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc) -#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc) - -#endif /* PRISM2_IO_DEBUG */ - - -static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, - int len) -{ - u16 d_off; - u16 *pos; - - d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; - pos = (u16 *) buf; - - if (len / 2) - HFA384X_INSW(d_off, buf, len / 2); - pos += len / 2; - - if (len & 1) - *((char *) pos) = HFA384X_INB(d_off); - - return 0; -} - - -static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) -{ - u16 d_off; - u16 *pos; - - d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; - pos = (u16 *) buf; - - if (len / 2) - HFA384X_OUTSW(d_off, buf, len / 2); - pos += len / 2; - - if (len & 1) - HFA384X_OUTB(*((char *) pos), d_off); - - return 0; -} - - -/* FIX: This might change at some point.. */ -#include "hostap_hw.c" - - -static void prism2_plx_cor_sreset(local_info_t *local) -{ - unsigned char corsave; - struct hostap_plx_priv *hw_priv = local->hw_priv; - - printk(KERN_DEBUG "%s: Doing reset via direct COR access.\n", - dev_info); - - /* Set sreset bit of COR and clear it after hold time */ - - if (hw_priv->attr_mem == NULL) { - /* TMD7160 - COR at card's first I/O addr */ - corsave = inb(hw_priv->cor_offset); - outb(corsave | COR_SRESET, hw_priv->cor_offset); - mdelay(2); - outb(corsave & ~COR_SRESET, hw_priv->cor_offset); - mdelay(2); - } else { - /* PLX9052 */ - corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset); - writeb(corsave | COR_SRESET, - hw_priv->attr_mem + hw_priv->cor_offset); - mdelay(2); - writeb(corsave & ~COR_SRESET, - hw_priv->attr_mem + hw_priv->cor_offset); - mdelay(2); - } -} - - -static void prism2_plx_genesis_reset(local_info_t *local, int hcr) -{ - unsigned char corsave; - struct hostap_plx_priv *hw_priv = local->hw_priv; - - if (hw_priv->attr_mem == NULL) { - /* TMD7160 - COR at card's first I/O addr */ - corsave = inb(hw_priv->cor_offset); - outb(corsave | COR_SRESET, hw_priv->cor_offset); - mdelay(10); - outb(hcr, hw_priv->cor_offset + 2); - mdelay(10); - outb(corsave & ~COR_SRESET, hw_priv->cor_offset); - mdelay(10); - } else { - /* PLX9052 */ - corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset); - writeb(corsave | COR_SRESET, - hw_priv->attr_mem + hw_priv->cor_offset); - mdelay(10); - writeb(hcr, hw_priv->attr_mem + hw_priv->cor_offset + 2); - mdelay(10); - writeb(corsave & ~COR_SRESET, - hw_priv->attr_mem + hw_priv->cor_offset); - mdelay(10); - } -} - - -static struct prism2_helper_functions prism2_plx_funcs = -{ - .card_present = NULL, - .cor_sreset = prism2_plx_cor_sreset, - .genesis_reset = prism2_plx_genesis_reset, - .hw_type = HOSTAP_HW_PLX, -}; - - -static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, - unsigned int *cor_offset, - unsigned int *cor_index) -{ -#define CISTPL_CONFIG 0x1A -#define CISTPL_MANFID 0x20 -#define CISTPL_END 0xFF -#define CIS_MAX_LEN 256 - u8 *cis; - int i, pos; - unsigned int rmsz, rasz, manfid1, manfid2; - struct prism2_plx_manfid *manfid; - - cis = kmalloc(CIS_MAX_LEN, GFP_KERNEL); - if (cis == NULL) - return -ENOMEM; - - /* read CIS; it is in even offsets in the beginning of attr_mem */ - for (i = 0; i < CIS_MAX_LEN; i++) - cis[i] = readb(attr_mem + 2 * i); - printk(KERN_DEBUG "%s: CIS: %6ph ...\n", dev_info, cis); - - /* set reasonable defaults for Prism2 cards just in case CIS parsing - * fails */ - *cor_offset = 0x3e0; - *cor_index = 0x01; - manfid1 = manfid2 = 0; - - pos = 0; - while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) { - if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN) - goto cis_error; - - switch (cis[pos]) { - case CISTPL_CONFIG: - if (cis[pos + 1] < 2) - goto cis_error; - rmsz = (cis[pos + 2] & 0x3c) >> 2; - rasz = cis[pos + 2] & 0x03; - if (4 + rasz + rmsz > cis[pos + 1]) - goto cis_error; - *cor_index = cis[pos + 3] & 0x3F; - *cor_offset = 0; - for (i = 0; i <= rasz; i++) - *cor_offset += cis[pos + 4 + i] << (8 * i); - printk(KERN_DEBUG "%s: cor_index=0x%x " - "cor_offset=0x%x\n", dev_info, - *cor_index, *cor_offset); - if (*cor_offset > attr_len) { - printk(KERN_ERR "%s: COR offset not within " - "attr_mem\n", dev_info); - kfree(cis); - return -1; - } - break; - - case CISTPL_MANFID: - if (cis[pos + 1] < 4) - goto cis_error; - manfid1 = cis[pos + 2] + (cis[pos + 3] << 8); - manfid2 = cis[pos + 4] + (cis[pos + 5] << 8); - printk(KERN_DEBUG "%s: manfid=0x%04x, 0x%04x\n", - dev_info, manfid1, manfid2); - break; - } - - pos += cis[pos + 1] + 2; - } - - if (pos >= CIS_MAX_LEN || cis[pos] != CISTPL_END) - goto cis_error; - - for (manfid = prism2_plx_known_manfids; manfid->manfid1 != 0; manfid++) - if (manfid1 == manfid->manfid1 && manfid2 == manfid->manfid2) { - kfree(cis); - return 0; - } - - printk(KERN_INFO "%s: unknown manfid 0x%04x, 0x%04x - assuming this is" - " not supported card\n", dev_info, manfid1, manfid2); - goto fail; - - cis_error: - printk(KERN_WARNING "%s: invalid CIS data\n", dev_info); - - fail: - kfree(cis); - if (ignore_cis) { - printk(KERN_INFO "%s: ignore_cis parameter set - ignoring " - "errors during CIS verification\n", dev_info); - return 0; - } - return -1; -} - - -static int prism2_plx_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - unsigned int pccard_ioaddr, plx_ioaddr; - unsigned long pccard_attr_mem; - unsigned int pccard_attr_len; - void __iomem *attr_mem = NULL; - unsigned int cor_offset = 0, cor_index = 0; - u32 reg; - local_info_t *local = NULL; - struct net_device *dev = NULL; - struct hostap_interface *iface; - static int cards_found /* = 0 */; - int irq_registered = 0; - int tmd7160; - struct hostap_plx_priv *hw_priv; - - hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL); - if (hw_priv == NULL) - return -ENOMEM; - - if (pci_enable_device(pdev)) - goto err_out_free; - - /* National Datacomm NCP130 based on TMD7160, not PLX9052. */ - tmd7160 = (pdev->vendor == 0x15e8) && (pdev->device == 0x0131); - - plx_ioaddr = pci_resource_start(pdev, 1); - pccard_ioaddr = pci_resource_start(pdev, tmd7160 ? 2 : 3); - - if (tmd7160) { - /* TMD7160 */ - attr_mem = NULL; /* no access to PC Card attribute memory */ - - printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, " - "irq=%d, pccard_io=0x%x\n", - plx_ioaddr, pdev->irq, pccard_ioaddr); - - cor_offset = plx_ioaddr; - cor_index = 0x04; - - outb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, plx_ioaddr); - mdelay(1); - reg = inb(plx_ioaddr); - if (reg != (cor_index | COR_LEVLREQ | COR_ENABLE_FUNC)) { - printk(KERN_ERR "%s: Error setting COR (expected=" - "0x%02x, was=0x%02x)\n", dev_info, - cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, reg); - goto fail; - } - } else { - /* PLX9052 */ - pccard_attr_mem = pci_resource_start(pdev, 2); - pccard_attr_len = pci_resource_len(pdev, 2); - if (pccard_attr_len < PLX_MIN_ATTR_LEN) - goto fail; - - - attr_mem = ioremap(pccard_attr_mem, pccard_attr_len); - if (attr_mem == NULL) { - printk(KERN_ERR "%s: cannot remap attr_mem\n", - dev_info); - goto fail; - } - - printk(KERN_INFO "PLX9052 PCI/PCMCIA adapter: " - "mem=0x%lx, plx_io=0x%x, irq=%d, pccard_io=0x%x\n", - pccard_attr_mem, plx_ioaddr, pdev->irq, pccard_ioaddr); - - if (prism2_plx_check_cis(attr_mem, pccard_attr_len, - &cor_offset, &cor_index)) { - printk(KERN_INFO "Unknown PC Card CIS - not a " - "Prism2/2.5 card?\n"); - goto fail; - } - - printk(KERN_DEBUG "Prism2/2.5 PC Card detected in PLX9052 " - "adapter\n"); - - /* Write COR to enable PC Card */ - writeb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, - attr_mem + cor_offset); - - /* Enable PCI interrupts if they are not already enabled */ - reg = inl(plx_ioaddr + PLX_INTCSR); - printk(KERN_DEBUG "PLX_INTCSR=0x%x\n", reg); - if (!(reg & PLX_INTCSR_PCI_INTEN)) { - outl(reg | PLX_INTCSR_PCI_INTEN, - plx_ioaddr + PLX_INTCSR); - if (!(inl(plx_ioaddr + PLX_INTCSR) & - PLX_INTCSR_PCI_INTEN)) { - printk(KERN_WARNING "%s: Could not enable " - "Local Interrupts\n", dev_info); - goto fail; - } - } - - reg = inl(plx_ioaddr + PLX_CNTRL); - printk(KERN_DEBUG "PLX_CNTRL=0x%x (Serial EEPROM " - "present=%d)\n", - reg, (reg & PLX_CNTRL_SERIAL_EEPROM_PRESENT) != 0); - /* should set PLX_PCIIPR to 0x01 (INTA#) if Serial EEPROM is - * not present; but are there really such cards in use(?) */ - } - - dev = prism2_init_local_data(&prism2_plx_funcs, cards_found, - &pdev->dev); - if (dev == NULL) - goto fail; - iface = netdev_priv(dev); - local = iface->local; - local->hw_priv = hw_priv; - cards_found++; - - dev->irq = pdev->irq; - dev->base_addr = pccard_ioaddr; - hw_priv->attr_mem = attr_mem; - hw_priv->cor_offset = cor_offset; - - pci_set_drvdata(pdev, dev); - - if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name, - dev)) { - printk(KERN_WARNING "%s: request_irq failed\n", dev->name); - goto fail; - } else - irq_registered = 1; - - if (prism2_hw_config(dev, 1)) { - printk(KERN_DEBUG "%s: hardware initialization failed\n", - dev_info); - goto fail; - } - - return hostap_hw_ready(dev); - - fail: - if (irq_registered && dev) - free_irq(dev->irq, dev); - - if (attr_mem) - iounmap(attr_mem); - - pci_disable_device(pdev); - prism2_free_local_data(dev); - - err_out_free: - kfree(hw_priv); - - return -ENODEV; -} - - -static void prism2_plx_remove(struct pci_dev *pdev) -{ - struct net_device *dev; - struct hostap_interface *iface; - struct hostap_plx_priv *hw_priv; - - dev = pci_get_drvdata(pdev); - iface = netdev_priv(dev); - hw_priv = iface->local->hw_priv; - - /* Reset the hardware, and ensure interrupts are disabled. */ - prism2_plx_cor_sreset(iface->local); - hfa384x_disable_interrupts(dev); - - if (hw_priv->attr_mem) - iounmap(hw_priv->attr_mem); - if (dev->irq) - free_irq(dev->irq, dev); - - prism2_free_local_data(dev); - kfree(hw_priv); - pci_disable_device(pdev); -} - - -MODULE_DEVICE_TABLE(pci, prism2_plx_id_table); - -static struct pci_driver prism2_plx_driver = { - .name = "hostap_plx", - .id_table = prism2_plx_id_table, - .probe = prism2_plx_probe, - .remove = prism2_plx_remove, -}; - -module_pci_driver(prism2_plx_driver); diff --git a/drivers/net/wireless/intersil/hostap/hostap_proc.c b/drivers/net/wireless/intersil/hostap/hostap_proc.c deleted file mode 100644 index 61f6878605..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_proc.c +++ /dev/null @@ -1,411 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* /proc routines for Host AP driver */ - -#include <linux/types.h> -#include <linux/proc_fs.h> -#include <linux/export.h> -#include <net/lib80211.h> - -#include "hostap_wlan.h" -#include "hostap.h" - -#define PROC_LIMIT (PAGE_SIZE - 80) - -#if !defined(PRISM2_NO_PROCFS_DEBUG) && defined(CONFIG_PROC_FS) -static int prism2_debug_proc_show(struct seq_file *m, void *v) -{ - local_info_t *local = m->private; - int i; - - seq_printf(m, "next_txfid=%d next_alloc=%d\n", - local->next_txfid, local->next_alloc); - for (i = 0; i < PRISM2_TXFID_COUNT; i++) - seq_printf(m, "FID: tx=%04X intransmit=%04X\n", - local->txfid[i], local->intransmitfid[i]); - seq_printf(m, "FW TX rate control: %d\n", local->fw_tx_rate_control); - seq_printf(m, "beacon_int=%d\n", local->beacon_int); - seq_printf(m, "dtim_period=%d\n", local->dtim_period); - seq_printf(m, "wds_max_connections=%d\n", local->wds_max_connections); - seq_printf(m, "dev_enabled=%d\n", local->dev_enabled); - seq_printf(m, "sw_tick_stuck=%d\n", local->sw_tick_stuck); - for (i = 0; i < WEP_KEYS; i++) { - if (local->crypt_info.crypt[i] && - local->crypt_info.crypt[i]->ops) { - seq_printf(m, "crypt[%d]=%s\n", i, - local->crypt_info.crypt[i]->ops->name); - } - } - seq_printf(m, "pri_only=%d\n", local->pri_only); - seq_printf(m, "pci=%d\n", local->func->hw_type == HOSTAP_HW_PCI); - seq_printf(m, "sram_type=%d\n", local->sram_type); - seq_printf(m, "no_pri=%d\n", local->no_pri); - - return 0; -} -#endif - -#ifdef CONFIG_PROC_FS -static int prism2_stats_proc_show(struct seq_file *m, void *v) -{ - local_info_t *local = m->private; - struct comm_tallies_sums *sums = &local->comm_tallies; - - seq_printf(m, "TxUnicastFrames=%u\n", sums->tx_unicast_frames); - seq_printf(m, "TxMulticastframes=%u\n", sums->tx_multicast_frames); - seq_printf(m, "TxFragments=%u\n", sums->tx_fragments); - seq_printf(m, "TxUnicastOctets=%u\n", sums->tx_unicast_octets); - seq_printf(m, "TxMulticastOctets=%u\n", sums->tx_multicast_octets); - seq_printf(m, "TxDeferredTransmissions=%u\n", - sums->tx_deferred_transmissions); - seq_printf(m, "TxSingleRetryFrames=%u\n", sums->tx_single_retry_frames); - seq_printf(m, "TxMultipleRetryFrames=%u\n", - sums->tx_multiple_retry_frames); - seq_printf(m, "TxRetryLimitExceeded=%u\n", - sums->tx_retry_limit_exceeded); - seq_printf(m, "TxDiscards=%u\n", sums->tx_discards); - seq_printf(m, "RxUnicastFrames=%u\n", sums->rx_unicast_frames); - seq_printf(m, "RxMulticastFrames=%u\n", sums->rx_multicast_frames); - seq_printf(m, "RxFragments=%u\n", sums->rx_fragments); - seq_printf(m, "RxUnicastOctets=%u\n", sums->rx_unicast_octets); - seq_printf(m, "RxMulticastOctets=%u\n", sums->rx_multicast_octets); - seq_printf(m, "RxFCSErrors=%u\n", sums->rx_fcs_errors); - seq_printf(m, "RxDiscardsNoBuffer=%u\n", sums->rx_discards_no_buffer); - seq_printf(m, "TxDiscardsWrongSA=%u\n", sums->tx_discards_wrong_sa); - seq_printf(m, "RxDiscardsWEPUndecryptable=%u\n", - sums->rx_discards_wep_undecryptable); - seq_printf(m, "RxMessageInMsgFragments=%u\n", - sums->rx_message_in_msg_fragments); - seq_printf(m, "RxMessageInBadMsgFragments=%u\n", - sums->rx_message_in_bad_msg_fragments); - /* FIX: this may grow too long for one page(?) */ - - return 0; -} -#endif - -static int prism2_wds_proc_show(struct seq_file *m, void *v) -{ - struct list_head *ptr = v; - struct hostap_interface *iface; - - iface = list_entry(ptr, struct hostap_interface, list); - if (iface->type == HOSTAP_INTERFACE_WDS) - seq_printf(m, "%s\t%pM\n", - iface->dev->name, iface->u.wds.remote_addr); - return 0; -} - -static void *prism2_wds_proc_start(struct seq_file *m, loff_t *_pos) -{ - local_info_t *local = pde_data(file_inode(m->file)); - read_lock_bh(&local->iface_lock); - return seq_list_start(&local->hostap_interfaces, *_pos); -} - -static void *prism2_wds_proc_next(struct seq_file *m, void *v, loff_t *_pos) -{ - local_info_t *local = pde_data(file_inode(m->file)); - return seq_list_next(v, &local->hostap_interfaces, _pos); -} - -static void prism2_wds_proc_stop(struct seq_file *m, void *v) -{ - local_info_t *local = pde_data(file_inode(m->file)); - read_unlock_bh(&local->iface_lock); -} - -static const struct seq_operations prism2_wds_proc_seqops = { - .start = prism2_wds_proc_start, - .next = prism2_wds_proc_next, - .stop = prism2_wds_proc_stop, - .show = prism2_wds_proc_show, -}; - -static int prism2_bss_list_proc_show(struct seq_file *m, void *v) -{ - local_info_t *local = pde_data(file_inode(m->file)); - struct list_head *ptr = v; - struct hostap_bss_info *bss; - - if (ptr == &local->bss_list) { - seq_printf(m, "#BSSID\tlast_update\tcount\tcapab_info\tSSID(txt)\t" - "SSID(hex)\tWPA IE\n"); - return 0; - } - - bss = list_entry(ptr, struct hostap_bss_info, list); - seq_printf(m, "%pM\t%lu\t%u\t0x%x\t", - bss->bssid, bss->last_update, - bss->count, bss->capab_info); - - seq_printf(m, "%*pE", (int)bss->ssid_len, bss->ssid); - - seq_putc(m, '\t'); - seq_printf(m, "%*phN", (int)bss->ssid_len, bss->ssid); - seq_putc(m, '\t'); - seq_printf(m, "%*phN", (int)bss->wpa_ie_len, bss->wpa_ie); - seq_putc(m, '\n'); - return 0; -} - -static void *prism2_bss_list_proc_start(struct seq_file *m, loff_t *_pos) - __acquires(&local->lock) -{ - local_info_t *local = pde_data(file_inode(m->file)); - spin_lock_bh(&local->lock); - return seq_list_start_head(&local->bss_list, *_pos); -} - -static void *prism2_bss_list_proc_next(struct seq_file *m, void *v, loff_t *_pos) -{ - local_info_t *local = pde_data(file_inode(m->file)); - return seq_list_next(v, &local->bss_list, _pos); -} - -static void prism2_bss_list_proc_stop(struct seq_file *m, void *v) - __releases(&local->lock) -{ - local_info_t *local = pde_data(file_inode(m->file)); - spin_unlock_bh(&local->lock); -} - -static const struct seq_operations prism2_bss_list_proc_seqops = { - .start = prism2_bss_list_proc_start, - .next = prism2_bss_list_proc_next, - .stop = prism2_bss_list_proc_stop, - .show = prism2_bss_list_proc_show, -}; - -#ifdef CONFIG_PROC_FS -static int prism2_crypt_proc_show(struct seq_file *m, void *v) -{ - local_info_t *local = m->private; - int i; - - seq_printf(m, "tx_keyidx=%d\n", local->crypt_info.tx_keyidx); - for (i = 0; i < WEP_KEYS; i++) { - if (local->crypt_info.crypt[i] && - local->crypt_info.crypt[i]->ops && - local->crypt_info.crypt[i]->ops->print_stats) { - local->crypt_info.crypt[i]->ops->print_stats( - m, local->crypt_info.crypt[i]->priv); - } - } - return 0; -} -#endif - -static ssize_t prism2_pda_proc_read(struct file *file, char __user *buf, - size_t count, loff_t *_pos) -{ - local_info_t *local = pde_data(file_inode(file)); - size_t off; - - if (local->pda == NULL || *_pos >= PRISM2_PDA_SIZE) - return 0; - - off = *_pos; - if (count > PRISM2_PDA_SIZE - off) - count = PRISM2_PDA_SIZE - off; - if (copy_to_user(buf, local->pda + off, count) != 0) - return -EFAULT; - *_pos += count; - return count; -} - -static const struct proc_ops prism2_pda_proc_ops = { - .proc_read = prism2_pda_proc_read, - .proc_lseek = generic_file_llseek, -}; - - -static ssize_t prism2_aux_dump_proc_no_read(struct file *file, char __user *buf, - size_t bufsize, loff_t *_pos) -{ - return 0; -} - -static const struct proc_ops prism2_aux_dump_proc_ops = { - .proc_read = prism2_aux_dump_proc_no_read, - .proc_lseek = default_llseek, -}; - - -#ifdef PRISM2_IO_DEBUG -static int prism2_io_debug_proc_read(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - local_info_t *local = (local_info_t *) data; - int head = local->io_debug_head; - int start_bytes, left, copy; - - if (off + count > PRISM2_IO_DEBUG_SIZE * 4) { - *eof = 1; - if (off >= PRISM2_IO_DEBUG_SIZE * 4) - return 0; - count = PRISM2_IO_DEBUG_SIZE * 4 - off; - } - - start_bytes = (PRISM2_IO_DEBUG_SIZE - head) * 4; - left = count; - - if (off < start_bytes) { - copy = start_bytes - off; - if (copy > count) - copy = count; - memcpy(page, ((u8 *) &local->io_debug[head]) + off, copy); - left -= copy; - if (left > 0) - memcpy(&page[copy], local->io_debug, left); - } else { - memcpy(page, ((u8 *) local->io_debug) + (off - start_bytes), - left); - } - - *start = page; - - return count; -} -#endif /* PRISM2_IO_DEBUG */ - - -#ifndef PRISM2_NO_STATION_MODES -static int prism2_scan_results_proc_show(struct seq_file *m, void *v) -{ - local_info_t *local = pde_data(file_inode(m->file)); - unsigned long entry; - int i, len; - struct hfa384x_hostscan_result *scanres; - u8 *p; - - if (v == SEQ_START_TOKEN) { - seq_printf(m, - "CHID ANL SL BcnInt Capab Rate BSSID ATIM SupRates SSID\n"); - return 0; - } - - entry = (unsigned long)v - 2; - scanres = &local->last_scan_results[entry]; - - seq_printf(m, "%d %d %d %d 0x%02x %d %pM %d ", - le16_to_cpu(scanres->chid), - (s16) le16_to_cpu(scanres->anl), - (s16) le16_to_cpu(scanres->sl), - le16_to_cpu(scanres->beacon_interval), - le16_to_cpu(scanres->capability), - le16_to_cpu(scanres->rate), - scanres->bssid, - le16_to_cpu(scanres->atim)); - - p = scanres->sup_rates; - for (i = 0; i < sizeof(scanres->sup_rates); i++) { - if (p[i] == 0) - break; - seq_printf(m, "<%02x>", p[i]); - } - seq_putc(m, ' '); - - p = scanres->ssid; - len = le16_to_cpu(scanres->ssid_len); - if (len > 32) - len = 32; - for (i = 0; i < len; i++) { - unsigned char c = p[i]; - if (c >= 32 && c < 127) - seq_putc(m, c); - else - seq_printf(m, "<%02x>", c); - } - seq_putc(m, '\n'); - return 0; -} - -static void *prism2_scan_results_proc_start(struct seq_file *m, loff_t *_pos) -{ - local_info_t *local = pde_data(file_inode(m->file)); - spin_lock_bh(&local->lock); - - /* We have a header (pos 0) + N results to show (pos 1...N) */ - if (*_pos > local->last_scan_results_count) - return NULL; - return (void *)(unsigned long)(*_pos + 1); /* 0 would be EOF */ -} - -static void *prism2_scan_results_proc_next(struct seq_file *m, void *v, loff_t *_pos) -{ - local_info_t *local = pde_data(file_inode(m->file)); - - ++*_pos; - if (*_pos > local->last_scan_results_count) - return NULL; - return (void *)(unsigned long)(*_pos + 1); /* 0 would be EOF */ -} - -static void prism2_scan_results_proc_stop(struct seq_file *m, void *v) -{ - local_info_t *local = pde_data(file_inode(m->file)); - spin_unlock_bh(&local->lock); -} - -static const struct seq_operations prism2_scan_results_proc_seqops = { - .start = prism2_scan_results_proc_start, - .next = prism2_scan_results_proc_next, - .stop = prism2_scan_results_proc_stop, - .show = prism2_scan_results_proc_show, -}; -#endif /* PRISM2_NO_STATION_MODES */ - - -void hostap_init_proc(local_info_t *local) -{ - local->proc = NULL; - - if (hostap_proc == NULL) { - printk(KERN_WARNING "%s: hostap proc directory not created\n", - local->dev->name); - return; - } - - local->proc = proc_mkdir(local->ddev->name, hostap_proc); - if (local->proc == NULL) { - printk(KERN_INFO "/proc/net/hostap/%s creation failed\n", - local->ddev->name); - return; - } - -#ifndef PRISM2_NO_PROCFS_DEBUG - proc_create_single_data("debug", 0, local->proc, - prism2_debug_proc_show, local); -#endif /* PRISM2_NO_PROCFS_DEBUG */ - proc_create_single_data("stats", 0, local->proc, prism2_stats_proc_show, - local); - proc_create_seq_data("wds", 0, local->proc, - &prism2_wds_proc_seqops, local); - proc_create_data("pda", 0, local->proc, - &prism2_pda_proc_ops, local); - proc_create_data("aux_dump", 0, local->proc, - local->func->read_aux_proc_ops ?: &prism2_aux_dump_proc_ops, - local); - proc_create_seq_data("bss_list", 0, local->proc, - &prism2_bss_list_proc_seqops, local); - proc_create_single_data("crypt", 0, local->proc, prism2_crypt_proc_show, - local); -#ifdef PRISM2_IO_DEBUG - proc_create_single_data("io_debug", 0, local->proc, - prism2_debug_proc_show, local); -#endif /* PRISM2_IO_DEBUG */ -#ifndef PRISM2_NO_STATION_MODES - proc_create_seq_data("scan_results", 0, local->proc, - &prism2_scan_results_proc_seqops, local); -#endif /* PRISM2_NO_STATION_MODES */ -} - - -void hostap_remove_proc(local_info_t *local) -{ - proc_remove(local->proc); -} - - -EXPORT_SYMBOL(hostap_init_proc); -EXPORT_SYMBOL(hostap_remove_proc); diff --git a/drivers/net/wireless/intersil/hostap/hostap_wlan.h b/drivers/net/wireless/intersil/hostap/hostap_wlan.h deleted file mode 100644 index f71c0545c0..0000000000 --- a/drivers/net/wireless/intersil/hostap/hostap_wlan.h +++ /dev/null @@ -1,1051 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef HOSTAP_WLAN_H -#define HOSTAP_WLAN_H - -#include <linux/interrupt.h> -#include <linux/wireless.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/mutex.h> -#include <linux/refcount.h> -#include <net/iw_handler.h> -#include <net/ieee80211_radiotap.h> -#include <net/lib80211.h> - -#include "hostap_config.h" -#include "hostap_common.h" - -#define MAX_PARM_DEVICES 8 -#define PARM_MIN_MAX "1-" __MODULE_STRING(MAX_PARM_DEVICES) -#define DEF_INTS -1, -1, -1, -1, -1, -1, -1 -#define GET_INT_PARM(var,idx) var[var[idx] < 0 ? 0 : idx] - - -/* Specific skb->protocol value that indicates that the packet already contains - * txdesc header. - * FIX: This might need own value that would be allocated especially for Prism2 - * txdesc; ETH_P_CONTROL is commented as "Card specific control frames". - * However, these skb's should have only minimal path in the kernel side since - * prism2_send_mgmt() sends these with dev_queue_xmit() to prism2_tx(). */ -#define ETH_P_HOSTAP ETH_P_CONTROL - -/* ARPHRD_IEEE80211_PRISM uses a bloated version of Prism2 RX frame header - * (from linux-wlan-ng) */ -struct linux_wlan_ng_val { - u32 did; - u16 status, len; - u32 data; -} __packed; - -struct linux_wlan_ng_prism_hdr { - u32 msgcode, msglen; - char devname[16]; - struct linux_wlan_ng_val hosttime, mactime, channel, rssi, sq, signal, - noise, rate, istx, frmlen; -} __packed; - -struct linux_wlan_ng_cap_hdr { - __be32 version; - __be32 length; - __be64 mactime; - __be64 hosttime; - __be32 phytype; - __be32 channel; - __be32 datarate; - __be32 antenna; - __be32 priority; - __be32 ssi_type; - __be32 ssi_signal; - __be32 ssi_noise; - __be32 preamble; - __be32 encoding; -} __packed; - -struct hostap_radiotap_rx { - struct ieee80211_radiotap_header hdr; - __le64 tsft; - u8 rate; - u8 padding; - __le16 chan_freq; - __le16 chan_flags; - s8 dbm_antsignal; - s8 dbm_antnoise; -} __packed; - -#define LWNG_CAP_DID_BASE (4 | (1 << 6)) /* section 4, group 1 */ -#define LWNG_CAPHDR_VERSION 0x80211001 - -struct hfa384x_rx_frame { - /* HFA384X RX frame descriptor */ - __le16 status; /* HFA384X_RX_STATUS_ flags */ - __le32 time; /* timestamp, 1 microsecond resolution */ - u8 silence; /* 27 .. 154; seems to be 0 */ - u8 signal; /* 27 .. 154 */ - u8 rate; /* 10, 20, 55, or 110 */ - u8 rxflow; - __le32 reserved; - - /* 802.11 */ - __le16 frame_control; - __le16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - __le16 seq_ctrl; - u8 addr4[ETH_ALEN]; - __le16 data_len; - - /* 802.3 */ - u8 dst_addr[ETH_ALEN]; - u8 src_addr[ETH_ALEN]; - __be16 len; - - /* followed by frame data; max 2304 bytes */ -} __packed; - - -struct hfa384x_tx_frame { - /* HFA384X TX frame descriptor */ - __le16 status; /* HFA384X_TX_STATUS_ flags */ - __le16 reserved1; - __le16 reserved2; - __le32 sw_support; - u8 retry_count; /* not yet implemented */ - u8 tx_rate; /* Host AP only; 0 = firmware, or 10, 20, 55, 110 */ - __le16 tx_control; /* HFA384X_TX_CTRL_ flags */ - - /* 802.11 */ - struct_group(header, - __le16 frame_control; /* parts not used */ - __le16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; /* filled by firmware */ - u8 addr3[ETH_ALEN]; - __le16 seq_ctrl; /* filled by firmware */ - ); - u8 addr4[ETH_ALEN]; - __le16 data_len; - - /* 802.3 */ - u8 dst_addr[ETH_ALEN]; - u8 src_addr[ETH_ALEN]; - __be16 len; - - /* followed by frame data; max 2304 bytes */ -} __packed; - - -struct hfa384x_rid_hdr -{ - __le16 len; - __le16 rid; -} __packed; - - -/* Macro for converting signal levels (range 27 .. 154) to wireless ext - * dBm value with some accuracy */ -#define HFA384X_LEVEL_TO_dBm(v) 0x100 + (v) * 100 / 255 - 100 - -#define HFA384X_LEVEL_TO_dBm_sign(v) (v) * 100 / 255 - 100 - -struct hfa384x_scan_request { - __le16 channel_list; - __le16 txrate; /* HFA384X_RATES_* */ -} __packed; - -struct hfa384x_hostscan_request { - __le16 channel_list; - __le16 txrate; - __le16 target_ssid_len; - u8 target_ssid[32]; -} __packed; - -struct hfa384x_join_request { - u8 bssid[ETH_ALEN]; - __le16 channel; -} __packed; - -struct hfa384x_info_frame { - __le16 len; - __le16 type; -} __packed; - -struct hfa384x_comm_tallies { - __le16 tx_unicast_frames; - __le16 tx_multicast_frames; - __le16 tx_fragments; - __le16 tx_unicast_octets; - __le16 tx_multicast_octets; - __le16 tx_deferred_transmissions; - __le16 tx_single_retry_frames; - __le16 tx_multiple_retry_frames; - __le16 tx_retry_limit_exceeded; - __le16 tx_discards; - __le16 rx_unicast_frames; - __le16 rx_multicast_frames; - __le16 rx_fragments; - __le16 rx_unicast_octets; - __le16 rx_multicast_octets; - __le16 rx_fcs_errors; - __le16 rx_discards_no_buffer; - __le16 tx_discards_wrong_sa; - __le16 rx_discards_wep_undecryptable; - __le16 rx_message_in_msg_fragments; - __le16 rx_message_in_bad_msg_fragments; -} __packed; - -struct hfa384x_comm_tallies32 { - __le32 tx_unicast_frames; - __le32 tx_multicast_frames; - __le32 tx_fragments; - __le32 tx_unicast_octets; - __le32 tx_multicast_octets; - __le32 tx_deferred_transmissions; - __le32 tx_single_retry_frames; - __le32 tx_multiple_retry_frames; - __le32 tx_retry_limit_exceeded; - __le32 tx_discards; - __le32 rx_unicast_frames; - __le32 rx_multicast_frames; - __le32 rx_fragments; - __le32 rx_unicast_octets; - __le32 rx_multicast_octets; - __le32 rx_fcs_errors; - __le32 rx_discards_no_buffer; - __le32 tx_discards_wrong_sa; - __le32 rx_discards_wep_undecryptable; - __le32 rx_message_in_msg_fragments; - __le32 rx_message_in_bad_msg_fragments; -} __packed; - -struct hfa384x_scan_result_hdr { - __le16 reserved; - __le16 scan_reason; -#define HFA384X_SCAN_IN_PROGRESS 0 /* no results available yet */ -#define HFA384X_SCAN_HOST_INITIATED 1 -#define HFA384X_SCAN_FIRMWARE_INITIATED 2 -#define HFA384X_SCAN_INQUIRY_FROM_HOST 3 -} __packed; - -#define HFA384X_SCAN_MAX_RESULTS 32 - -struct hfa384x_scan_result { - __le16 chid; - __le16 anl; - __le16 sl; - u8 bssid[ETH_ALEN]; - __le16 beacon_interval; - __le16 capability; - __le16 ssid_len; - u8 ssid[32]; - u8 sup_rates[10]; - __le16 rate; -} __packed; - -struct hfa384x_hostscan_result { - __le16 chid; - __le16 anl; - __le16 sl; - u8 bssid[ETH_ALEN]; - __le16 beacon_interval; - __le16 capability; - __le16 ssid_len; - u8 ssid[32]; - u8 sup_rates[10]; - __le16 rate; - __le16 atim; -} __packed; - -struct comm_tallies_sums { - unsigned int tx_unicast_frames; - unsigned int tx_multicast_frames; - unsigned int tx_fragments; - unsigned int tx_unicast_octets; - unsigned int tx_multicast_octets; - unsigned int tx_deferred_transmissions; - unsigned int tx_single_retry_frames; - unsigned int tx_multiple_retry_frames; - unsigned int tx_retry_limit_exceeded; - unsigned int tx_discards; - unsigned int rx_unicast_frames; - unsigned int rx_multicast_frames; - unsigned int rx_fragments; - unsigned int rx_unicast_octets; - unsigned int rx_multicast_octets; - unsigned int rx_fcs_errors; - unsigned int rx_discards_no_buffer; - unsigned int tx_discards_wrong_sa; - unsigned int rx_discards_wep_undecryptable; - unsigned int rx_message_in_msg_fragments; - unsigned int rx_message_in_bad_msg_fragments; -}; - - -struct hfa384x_regs { - u16 cmd; - u16 evstat; - u16 offset0; - u16 offset1; - u16 swsupport0; -}; - - -#if defined(PRISM2_PCCARD) || defined(PRISM2_PLX) -/* I/O ports for HFA384X Controller access */ -#define HFA384X_CMD_OFF 0x00 -#define HFA384X_PARAM0_OFF 0x02 -#define HFA384X_PARAM1_OFF 0x04 -#define HFA384X_PARAM2_OFF 0x06 -#define HFA384X_STATUS_OFF 0x08 -#define HFA384X_RESP0_OFF 0x0A -#define HFA384X_RESP1_OFF 0x0C -#define HFA384X_RESP2_OFF 0x0E -#define HFA384X_INFOFID_OFF 0x10 -#define HFA384X_CONTROL_OFF 0x14 -#define HFA384X_SELECT0_OFF 0x18 -#define HFA384X_SELECT1_OFF 0x1A -#define HFA384X_OFFSET0_OFF 0x1C -#define HFA384X_OFFSET1_OFF 0x1E -#define HFA384X_RXFID_OFF 0x20 -#define HFA384X_ALLOCFID_OFF 0x22 -#define HFA384X_TXCOMPLFID_OFF 0x24 -#define HFA384X_SWSUPPORT0_OFF 0x28 -#define HFA384X_SWSUPPORT1_OFF 0x2A -#define HFA384X_SWSUPPORT2_OFF 0x2C -#define HFA384X_EVSTAT_OFF 0x30 -#define HFA384X_INTEN_OFF 0x32 -#define HFA384X_EVACK_OFF 0x34 -#define HFA384X_DATA0_OFF 0x36 -#define HFA384X_DATA1_OFF 0x38 -#define HFA384X_AUXPAGE_OFF 0x3A -#define HFA384X_AUXOFFSET_OFF 0x3C -#define HFA384X_AUXDATA_OFF 0x3E -#endif /* PRISM2_PCCARD || PRISM2_PLX */ - -#ifdef PRISM2_PCI -/* Memory addresses for ISL3874 controller access */ -#define HFA384X_CMD_OFF 0x00 -#define HFA384X_PARAM0_OFF 0x04 -#define HFA384X_PARAM1_OFF 0x08 -#define HFA384X_PARAM2_OFF 0x0C -#define HFA384X_STATUS_OFF 0x10 -#define HFA384X_RESP0_OFF 0x14 -#define HFA384X_RESP1_OFF 0x18 -#define HFA384X_RESP2_OFF 0x1C -#define HFA384X_INFOFID_OFF 0x20 -#define HFA384X_CONTROL_OFF 0x28 -#define HFA384X_SELECT0_OFF 0x30 -#define HFA384X_SELECT1_OFF 0x34 -#define HFA384X_OFFSET0_OFF 0x38 -#define HFA384X_OFFSET1_OFF 0x3C -#define HFA384X_RXFID_OFF 0x40 -#define HFA384X_ALLOCFID_OFF 0x44 -#define HFA384X_TXCOMPLFID_OFF 0x48 -#define HFA384X_PCICOR_OFF 0x4C -#define HFA384X_SWSUPPORT0_OFF 0x50 -#define HFA384X_SWSUPPORT1_OFF 0x54 -#define HFA384X_SWSUPPORT2_OFF 0x58 -#define HFA384X_PCIHCR_OFF 0x5C -#define HFA384X_EVSTAT_OFF 0x60 -#define HFA384X_INTEN_OFF 0x64 -#define HFA384X_EVACK_OFF 0x68 -#define HFA384X_DATA0_OFF 0x6C -#define HFA384X_DATA1_OFF 0x70 -#define HFA384X_AUXPAGE_OFF 0x74 -#define HFA384X_AUXOFFSET_OFF 0x78 -#define HFA384X_AUXDATA_OFF 0x7C -#define HFA384X_PCI_M0_ADDRH_OFF 0x80 -#define HFA384X_PCI_M0_ADDRL_OFF 0x84 -#define HFA384X_PCI_M0_LEN_OFF 0x88 -#define HFA384X_PCI_M0_CTL_OFF 0x8C -#define HFA384X_PCI_STATUS_OFF 0x98 -#define HFA384X_PCI_M1_ADDRH_OFF 0xA0 -#define HFA384X_PCI_M1_ADDRL_OFF 0xA4 -#define HFA384X_PCI_M1_LEN_OFF 0xA8 -#define HFA384X_PCI_M1_CTL_OFF 0xAC - -/* PCI bus master control bits (these are undocumented; based on guessing and - * experimenting..) */ -#define HFA384X_PCI_CTL_FROM_BAP (BIT(5) | BIT(1) | BIT(0)) -#define HFA384X_PCI_CTL_TO_BAP (BIT(5) | BIT(0)) - -#endif /* PRISM2_PCI */ - - -/* Command codes for CMD reg. */ -#define HFA384X_CMDCODE_INIT 0x00 -#define HFA384X_CMDCODE_ENABLE 0x01 -#define HFA384X_CMDCODE_DISABLE 0x02 -#define HFA384X_CMDCODE_ALLOC 0x0A -#define HFA384X_CMDCODE_TRANSMIT 0x0B -#define HFA384X_CMDCODE_INQUIRE 0x11 -#define HFA384X_CMDCODE_ACCESS 0x21 -#define HFA384X_CMDCODE_ACCESS_WRITE (0x21 | BIT(8)) -#define HFA384X_CMDCODE_DOWNLOAD 0x22 -#define HFA384X_CMDCODE_READMIF 0x30 -#define HFA384X_CMDCODE_WRITEMIF 0x31 -#define HFA384X_CMDCODE_TEST 0x38 - -#define HFA384X_CMDCODE_MASK 0x3F - -/* Test mode operations */ -#define HFA384X_TEST_CHANGE_CHANNEL 0x08 -#define HFA384X_TEST_MONITOR 0x0B -#define HFA384X_TEST_STOP 0x0F -#define HFA384X_TEST_CFG_BITS 0x15 -#define HFA384X_TEST_CFG_BIT_ALC BIT(3) - -#define HFA384X_CMD_BUSY BIT(15) - -#define HFA384X_CMD_TX_RECLAIM BIT(8) - -#define HFA384X_OFFSET_ERR BIT(14) -#define HFA384X_OFFSET_BUSY BIT(15) - - -/* ProgMode for download command */ -#define HFA384X_PROGMODE_DISABLE 0 -#define HFA384X_PROGMODE_ENABLE_VOLATILE 1 -#define HFA384X_PROGMODE_ENABLE_NON_VOLATILE 2 -#define HFA384X_PROGMODE_PROGRAM_NON_VOLATILE 3 - -#define HFA384X_AUX_MAGIC0 0xfe01 -#define HFA384X_AUX_MAGIC1 0xdc23 -#define HFA384X_AUX_MAGIC2 0xba45 - -#define HFA384X_AUX_PORT_DISABLED 0 -#define HFA384X_AUX_PORT_DISABLE BIT(14) -#define HFA384X_AUX_PORT_ENABLE BIT(15) -#define HFA384X_AUX_PORT_ENABLED (BIT(14) | BIT(15)) -#define HFA384X_AUX_PORT_MASK (BIT(14) | BIT(15)) - -#define PRISM2_PDA_SIZE 1024 - - -/* Events; EvStat, Interrupt mask (IntEn), and acknowledge bits (EvAck) */ -#define HFA384X_EV_TICK BIT(15) -#define HFA384X_EV_WTERR BIT(14) -#define HFA384X_EV_INFDROP BIT(13) -#ifdef PRISM2_PCI -#define HFA384X_EV_PCI_M1 BIT(9) -#define HFA384X_EV_PCI_M0 BIT(8) -#endif /* PRISM2_PCI */ -#define HFA384X_EV_INFO BIT(7) -#define HFA384X_EV_DTIM BIT(5) -#define HFA384X_EV_CMD BIT(4) -#define HFA384X_EV_ALLOC BIT(3) -#define HFA384X_EV_TXEXC BIT(2) -#define HFA384X_EV_TX BIT(1) -#define HFA384X_EV_RX BIT(0) - - -/* HFA384X Information frames */ -#define HFA384X_INFO_HANDOVERADDR 0xF000 /* AP f/w ? */ -#define HFA384X_INFO_HANDOVERDEAUTHADDR 0xF001 /* AP f/w 1.3.7 */ -#define HFA384X_INFO_COMMTALLIES 0xF100 -#define HFA384X_INFO_SCANRESULTS 0xF101 -#define HFA384X_INFO_CHANNELINFORESULTS 0xF102 /* AP f/w only */ -#define HFA384X_INFO_HOSTSCANRESULTS 0xF103 -#define HFA384X_INFO_LINKSTATUS 0xF200 -#define HFA384X_INFO_ASSOCSTATUS 0xF201 /* ? */ -#define HFA384X_INFO_AUTHREQ 0xF202 /* ? */ -#define HFA384X_INFO_PSUSERCNT 0xF203 /* ? */ -#define HFA384X_INFO_KEYIDCHANGED 0xF204 /* ? */ - -enum { HFA384X_LINKSTATUS_CONNECTED = 1, - HFA384X_LINKSTATUS_DISCONNECTED = 2, - HFA384X_LINKSTATUS_AP_CHANGE = 3, - HFA384X_LINKSTATUS_AP_OUT_OF_RANGE = 4, - HFA384X_LINKSTATUS_AP_IN_RANGE = 5, - HFA384X_LINKSTATUS_ASSOC_FAILED = 6 }; - -enum { HFA384X_PORTTYPE_BSS = 1, HFA384X_PORTTYPE_WDS = 2, - HFA384X_PORTTYPE_PSEUDO_IBSS = 3, HFA384X_PORTTYPE_IBSS = 0, - HFA384X_PORTTYPE_HOSTAP = 6 }; - -#define HFA384X_RATES_1MBPS BIT(0) -#define HFA384X_RATES_2MBPS BIT(1) -#define HFA384X_RATES_5MBPS BIT(2) -#define HFA384X_RATES_11MBPS BIT(3) - -#define HFA384X_ROAMING_FIRMWARE 1 -#define HFA384X_ROAMING_HOST 2 -#define HFA384X_ROAMING_DISABLED 3 - -#define HFA384X_WEPFLAGS_PRIVACYINVOKED BIT(0) -#define HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED BIT(1) -#define HFA384X_WEPFLAGS_HOSTENCRYPT BIT(4) -#define HFA384X_WEPFLAGS_HOSTDECRYPT BIT(7) - -#define HFA384X_RX_STATUS_MSGTYPE (BIT(15) | BIT(14) | BIT(13)) -#define HFA384X_RX_STATUS_PCF BIT(12) -#define HFA384X_RX_STATUS_MACPORT (BIT(10) | BIT(9) | BIT(8)) -#define HFA384X_RX_STATUS_UNDECR BIT(1) -#define HFA384X_RX_STATUS_FCSERR BIT(0) - -#define HFA384X_RX_STATUS_GET_MSGTYPE(s) \ -(((s) & HFA384X_RX_STATUS_MSGTYPE) >> 13) -#define HFA384X_RX_STATUS_GET_MACPORT(s) \ -(((s) & HFA384X_RX_STATUS_MACPORT) >> 8) - -enum { HFA384X_RX_MSGTYPE_NORMAL = 0, HFA384X_RX_MSGTYPE_RFC1042 = 1, - HFA384X_RX_MSGTYPE_BRIDGETUNNEL = 2, HFA384X_RX_MSGTYPE_MGMT = 4 }; - - -#define HFA384X_TX_CTRL_ALT_RTRY BIT(5) -#define HFA384X_TX_CTRL_802_11 BIT(3) -#define HFA384X_TX_CTRL_802_3 0 -#define HFA384X_TX_CTRL_TX_EX BIT(2) -#define HFA384X_TX_CTRL_TX_OK BIT(1) - -#define HFA384X_TX_STATUS_RETRYERR BIT(0) -#define HFA384X_TX_STATUS_AGEDERR BIT(1) -#define HFA384X_TX_STATUS_DISCON BIT(2) -#define HFA384X_TX_STATUS_FORMERR BIT(3) - -/* HFA3861/3863 (BBP) Control Registers */ -#define HFA386X_CR_TX_CONFIGURE 0x12 /* CR9 */ -#define HFA386X_CR_RX_CONFIGURE 0x14 /* CR10 */ -#define HFA386X_CR_A_D_TEST_MODES2 0x1A /* CR13 */ -#define HFA386X_CR_MANUAL_TX_POWER 0x3E /* CR31 */ -#define HFA386X_CR_MEASURED_TX_POWER 0x74 /* CR58 */ - - -#ifdef __KERNEL__ - -#define PRISM2_TXFID_COUNT 8 -#define PRISM2_DATA_MAXLEN 2304 -#define PRISM2_TXFID_LEN (PRISM2_DATA_MAXLEN + sizeof(struct hfa384x_tx_frame)) -#define PRISM2_TXFID_EMPTY 0xffff -#define PRISM2_TXFID_RESERVED 0xfffe -#define PRISM2_DUMMY_FID 0xffff -#define MAX_SSID_LEN 32 -#define MAX_NAME_LEN 32 /* this is assumed to be equal to MAX_SSID_LEN */ - -#define PRISM2_DUMP_RX_HDR BIT(0) -#define PRISM2_DUMP_TX_HDR BIT(1) -#define PRISM2_DUMP_TXEXC_HDR BIT(2) - -struct hostap_tx_callback_info { - u16 idx; - void (*func)(struct sk_buff *, int ok, void *); - void *data; - struct hostap_tx_callback_info *next; -}; - - -/* IEEE 802.11 requires that STA supports concurrent reception of at least - * three fragmented frames. This define can be increased to support more - * concurrent frames, but it should be noted that each entry can consume about - * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ -#define PRISM2_FRAG_CACHE_LEN 4 - -struct prism2_frag_entry { - unsigned long first_frag_time; - unsigned int seq; - unsigned int last_frag; - struct sk_buff *skb; - u8 src_addr[ETH_ALEN]; - u8 dst_addr[ETH_ALEN]; -}; - - -struct hostap_cmd_queue { - struct list_head list; - wait_queue_head_t compl; - volatile enum { CMD_SLEEP, CMD_CALLBACK, CMD_COMPLETED } type; - void (*callback)(struct net_device *dev, long context, u16 resp0, - u16 res); - long context; - u16 cmd, param0, param1; - u16 resp0, res; - volatile int issued, issuing; - - refcount_t usecnt; - int del_req; -}; - -/* options for hw_shutdown */ -#define HOSTAP_HW_NO_DISABLE BIT(0) -#define HOSTAP_HW_ENABLE_CMDCOMPL BIT(1) - -typedef struct local_info local_info_t; - -struct prism2_helper_functions { - /* these functions are defined in hardware model specific files - * (hostap_{cs,plx,pci}.c */ - int (*card_present)(local_info_t *local); - void (*cor_sreset)(local_info_t *local); - void (*genesis_reset)(local_info_t *local, int hcr); - - /* the following functions are from hostap_hw.c, but they may have some - * hardware model specific code */ - - /* FIX: low-level commands like cmd might disappear at some point to - * make it easier to change them if needed (e.g., cmd would be replaced - * with write_mif/read_mif/testcmd/inquire); at least get_rid and - * set_rid might move to hostap_{cs,plx,pci}.c */ - int (*cmd)(struct net_device *dev, u16 cmd, u16 param0, u16 *param1, - u16 *resp0); - void (*read_regs)(struct net_device *dev, struct hfa384x_regs *regs); - int (*get_rid)(struct net_device *dev, u16 rid, void *buf, int len, - int exact_len); - int (*set_rid)(struct net_device *dev, u16 rid, void *buf, int len); - int (*hw_enable)(struct net_device *dev, int initial); - int (*hw_config)(struct net_device *dev, int initial); - void (*hw_reset)(struct net_device *dev); - void (*hw_shutdown)(struct net_device *dev, int no_disable); - int (*reset_port)(struct net_device *dev); - void (*schedule_reset)(local_info_t *local); - int (*download)(local_info_t *local, - struct prism2_download_param *param); - int (*tx)(struct sk_buff *skb, struct net_device *dev); - int (*set_tim)(struct net_device *dev, int aid, int set); - const struct proc_ops *read_aux_proc_ops; - - int need_tx_headroom; /* number of bytes of headroom needed before - * IEEE 802.11 header */ - enum { HOSTAP_HW_PCCARD, HOSTAP_HW_PLX, HOSTAP_HW_PCI } hw_type; -}; - - -struct prism2_download_data { - u32 dl_cmd; - u32 start_addr; - u32 num_areas; - struct prism2_download_data_area { - u32 addr; /* wlan card address */ - u32 len; - u8 *data; /* allocated data */ - } data[] __counted_by(num_areas); -}; - - -#define HOSTAP_MAX_BSS_COUNT 64 -#define MAX_WPA_IE_LEN 64 - -struct hostap_bss_info { - struct list_head list; - unsigned long last_update; - unsigned int count; - u8 bssid[ETH_ALEN]; - u16 capab_info; - u8 ssid[32]; - size_t ssid_len; - u8 wpa_ie[MAX_WPA_IE_LEN]; - size_t wpa_ie_len; - u8 rsn_ie[MAX_WPA_IE_LEN]; - size_t rsn_ie_len; - int chan; - int included; -}; - - -/* Per radio private Host AP data - shared by all net devices interfaces used - * by each radio (wlan#, wlan#ap, wlan#sta, WDS). - * ((struct hostap_interface *) netdev_priv(dev))->local points to this - * structure. */ -struct local_info { - struct module *hw_module; - int card_idx; - int dev_enabled; - int master_dev_auto_open; /* was master device opened automatically */ - int num_dev_open; /* number of open devices */ - struct net_device *dev; /* master radio device */ - struct net_device *ddev; /* main data device */ - struct list_head hostap_interfaces; /* Host AP interface list (contains - * struct hostap_interface entries) - */ - rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock - * when removing entries from the list. - * TX and RX paths can use read lock. */ - spinlock_t cmdlock, baplock, lock, irq_init_lock; - struct mutex rid_bap_mtx; - u16 infofid; /* MAC buffer id for info frame */ - /* txfid, intransmitfid, next_txtid, and next_alloc are protected by - * txfidlock */ - spinlock_t txfidlock; - int txfid_len; /* length of allocated TX buffers */ - u16 txfid[PRISM2_TXFID_COUNT]; /* buffer IDs for TX frames */ - /* buffer IDs for intransmit frames or PRISM2_TXFID_EMPTY if - * corresponding txfid is free for next TX frame */ - u16 intransmitfid[PRISM2_TXFID_COUNT]; - int next_txfid; /* index to the next txfid to be checked for - * availability */ - int next_alloc; /* index to the next intransmitfid to be checked for - * allocation events */ - - /* bitfield for atomic bitops */ -#define HOSTAP_BITS_TRANSMIT 0 -#define HOSTAP_BITS_BAP_TASKLET 1 -#define HOSTAP_BITS_BAP_TASKLET2 2 - unsigned long bits; - - struct ap_data *ap; - - char essid[MAX_SSID_LEN + 1]; - char name[MAX_NAME_LEN + 1]; - int name_set; - u16 channel_mask; /* mask of allowed channels */ - u16 scan_channel_mask; /* mask of channels to be scanned */ - struct comm_tallies_sums comm_tallies; - struct proc_dir_entry *proc; - int iw_mode; /* operating mode (IW_MODE_*) */ - int pseudo_adhoc; /* 0: IW_MODE_ADHOC is real 802.11 compliant IBSS - * 1: IW_MODE_ADHOC is "pseudo IBSS" */ - char bssid[ETH_ALEN]; - int channel; - int beacon_int; - int dtim_period; - int mtu; - int frame_dump; /* dump RX/TX frame headers, PRISM2_DUMP_ flags */ - int fw_tx_rate_control; - u16 tx_rate_control; - u16 basic_rates; - int hw_resetting; - int hw_ready; - int hw_reset_tries; /* how many times reset has been tried */ - int hw_downloading; - int shutdown; - int pri_only; - int no_pri; /* no PRI f/w present */ - int sram_type; /* 8 = x8 SRAM, 16 = x16 SRAM, -1 = unknown */ - - enum { - PRISM2_TXPOWER_AUTO = 0, PRISM2_TXPOWER_OFF, - PRISM2_TXPOWER_FIXED, PRISM2_TXPOWER_UNKNOWN - } txpower_type; - int txpower; /* if txpower_type == PRISM2_TXPOWER_FIXED */ - - /* command queue for hfa384x_cmd(); protected with cmdlock */ - struct list_head cmd_queue; - /* max_len for cmd_queue; in addition, cmd_callback can use two - * additional entries to prevent sleeping commands from stopping - * transmits */ -#define HOSTAP_CMD_QUEUE_MAX_LEN 16 - int cmd_queue_len; /* number of entries in cmd_queue */ - - /* if card timeout is detected in interrupt context, reset_queue is - * used to schedule card reseting to be done in user context */ - struct work_struct reset_queue; - - /* For scheduling a change of the promiscuous mode RID */ - int is_promisc; - struct work_struct set_multicast_list_queue; - - struct work_struct set_tim_queue; - struct list_head set_tim_list; - spinlock_t set_tim_lock; - - int wds_max_connections; - int wds_connections; -#define HOSTAP_WDS_BROADCAST_RA BIT(0) -#define HOSTAP_WDS_AP_CLIENT BIT(1) -#define HOSTAP_WDS_STANDARD_FRAME BIT(2) - u32 wds_type; - u16 tx_control; /* flags to be used in TX description */ - int manual_retry_count; /* -1 = use f/w default; otherwise retry count - * to be used with all frames */ - - struct iw_statistics wstats; - unsigned long scan_timestamp; /* Time started to scan */ - enum { - PRISM2_MONITOR_80211 = 0, PRISM2_MONITOR_PRISM = 1, - PRISM2_MONITOR_CAPHDR = 2, PRISM2_MONITOR_RADIOTAP = 3 - } monitor_type; - int monitor_allow_fcserr; - - int hostapd; /* whether user space daemon, hostapd, is used for AP - * management */ - int hostapd_sta; /* whether hostapd is used with an extra STA interface - */ - struct net_device *apdev; - struct net_device_stats apdevstats; - - char assoc_ap_addr[ETH_ALEN]; - struct net_device *stadev; - struct net_device_stats stadevstats; - -#define WEP_KEYS 4 -#define WEP_KEY_LEN 13 - struct lib80211_crypt_info crypt_info; - - int open_wep; /* allow unencrypted frames */ - int host_encrypt; - int host_decrypt; - int privacy_invoked; /* force privacy invoked flag even if no keys are - * configured */ - int fw_encrypt_ok; /* whether firmware-based WEP encrypt is working - * in Host AP mode (STA f/w 1.4.9 or newer) */ - int bcrx_sta_key; /* use individual keys to override default keys even - * with RX of broad/multicast frames */ - - struct prism2_frag_entry frag_cache[PRISM2_FRAG_CACHE_LEN]; - unsigned int frag_next_idx; - - int ieee_802_1x; /* is IEEE 802.1X used */ - - int antsel_tx, antsel_rx; - int rts_threshold; /* dot11RTSThreshold */ - int fragm_threshold; /* dot11FragmentationThreshold */ - int auth_algs; /* PRISM2_AUTH_ flags */ - - int enh_sec; /* cnfEnhSecurity options (broadcast SSID hide/ignore) */ - int tallies32; /* 32-bit tallies in use */ - - struct prism2_helper_functions *func; - - u8 *pda; - int fw_ap; -#define PRISM2_FW_VER(major, minor, variant) \ -(((major) << 16) | ((minor) << 8) | variant) - u32 sta_fw_ver; - - /* Tasklets for handling hardware IRQ related operations outside hw IRQ - * handler */ - struct tasklet_struct bap_tasklet; - - struct tasklet_struct info_tasklet; - struct sk_buff_head info_list; /* info frames as skb's for - * info_tasklet */ - - struct hostap_tx_callback_info *tx_callback; /* registered TX callbacks - */ - - struct tasklet_struct rx_tasklet; - struct sk_buff_head rx_list; - - struct tasklet_struct sta_tx_exc_tasklet; - struct sk_buff_head sta_tx_exc_list; - - int host_roaming; - unsigned long last_join_time; /* time of last JoinRequest */ - struct hfa384x_hostscan_result *last_scan_results; - int last_scan_results_count; - enum { PRISM2_SCAN, PRISM2_HOSTSCAN } last_scan_type; - struct work_struct info_queue; - unsigned long pending_info; /* bit field of pending info_queue items */ -#define PRISM2_INFO_PENDING_LINKSTATUS 0 -#define PRISM2_INFO_PENDING_SCANRESULTS 1 - int prev_link_status; /* previous received LinkStatus info */ - int prev_linkstatus_connected; - u8 preferred_ap[ETH_ALEN]; /* use this AP if possible */ - -#ifdef PRISM2_CALLBACK - void *callback_data; /* Can be used in callbacks; e.g., allocate - * on enable event and free on disable event. - * Host AP driver code does not touch this. */ -#endif /* PRISM2_CALLBACK */ - - wait_queue_head_t hostscan_wq; - - /* Passive scan in Host AP mode */ - struct timer_list passive_scan_timer; - int passive_scan_interval; /* in seconds, 0 = disabled */ - int passive_scan_channel; - enum { PASSIVE_SCAN_WAIT, PASSIVE_SCAN_LISTEN } passive_scan_state; - - struct timer_list tick_timer; - unsigned long last_tick_timer; - unsigned int sw_tick_stuck; - - /* commsQuality / dBmCommsQuality data from periodic polling; only - * valid for Managed and Ad-hoc modes */ - unsigned long last_comms_qual_update; - int comms_qual; /* in some odd unit.. */ - int avg_signal; /* in dB (note: negative) */ - int avg_noise; /* in dB (note: negative) */ - struct work_struct comms_qual_update; - - /* RSSI to dBm adjustment (for RX descriptor fields) */ - int rssi_to_dBm; /* subtract from RSSI to get approximate dBm value */ - - /* BSS list / protected by local->lock */ - struct list_head bss_list; - int num_bss_info; - int wpa; /* WPA support enabled */ - int tkip_countermeasures; - int drop_unencrypted; - /* Generic IEEE 802.11 info element to be added to - * ProbeResp/Beacon/(Re)AssocReq */ - u8 *generic_elem; - size_t generic_elem_len; - -#ifdef PRISM2_DOWNLOAD_SUPPORT - /* Persistent volatile download data */ - struct prism2_download_data *dl_pri; - struct prism2_download_data *dl_sec; -#endif /* PRISM2_DOWNLOAD_SUPPORT */ - -#ifdef PRISM2_IO_DEBUG -#define PRISM2_IO_DEBUG_SIZE 10000 - u32 io_debug[PRISM2_IO_DEBUG_SIZE]; - int io_debug_head; - int io_debug_enabled; -#endif /* PRISM2_IO_DEBUG */ - - /* Pointer to hardware model specific (cs,pci,plx) private data. */ - void *hw_priv; -}; - - -/* Per interface private Host AP data - * Allocated for each net device that Host AP uses (wlan#, wlan#ap, wlan#sta, - * WDS) and netdev_priv(dev) points to this structure. */ -struct hostap_interface { - struct list_head list; /* list entry in Host AP interface list */ - struct net_device *dev; /* pointer to this device */ - struct local_info *local; /* pointer to shared private data */ - struct net_device_stats stats; - struct iw_spy_data spy_data; /* iwspy support */ - struct iw_public_data wireless_data; - - enum { - HOSTAP_INTERFACE_MASTER, - HOSTAP_INTERFACE_MAIN, - HOSTAP_INTERFACE_AP, - HOSTAP_INTERFACE_STA, - HOSTAP_INTERFACE_WDS, - } type; - - union { - struct hostap_interface_wds { - u8 remote_addr[ETH_ALEN]; - } wds; - } u; -}; - - -#define HOSTAP_SKB_TX_DATA_MAGIC 0xf08a36a2 - -/* - * TX meta data - stored in skb->cb buffer, so this must not be increased over - * the 48-byte limit. - * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE - * TO SEE THE DAY. - */ -struct hostap_skb_tx_data { - unsigned int __padding_for_default_qdiscs; - u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */ - u8 rate; /* transmit rate */ -#define HOSTAP_TX_FLAGS_WDS BIT(0) -#define HOSTAP_TX_FLAGS_BUFFERED_FRAME BIT(1) -#define HOSTAP_TX_FLAGS_ADD_MOREDATA BIT(2) - u8 flags; /* HOSTAP_TX_FLAGS_* */ - u16 tx_cb_idx; - struct hostap_interface *iface; - unsigned long jiffies; /* queueing timestamp */ - unsigned short ethertype; -}; - - -#ifndef PRISM2_NO_DEBUG - -#define DEBUG_FID BIT(0) -#define DEBUG_PS BIT(1) -#define DEBUG_FLOW BIT(2) -#define DEBUG_AP BIT(3) -#define DEBUG_HW BIT(4) -#define DEBUG_EXTRA BIT(5) -#define DEBUG_EXTRA2 BIT(6) -#define DEBUG_PS2 BIT(7) -#define DEBUG_MASK (DEBUG_PS | DEBUG_AP | DEBUG_HW | DEBUG_EXTRA) -#define PDEBUG(n, args...) \ -do { if ((n) & DEBUG_MASK) printk(KERN_DEBUG args); } while (0) -#define PDEBUG2(n, args...) \ -do { if ((n) & DEBUG_MASK) printk(args); } while (0) - -#else /* PRISM2_NO_DEBUG */ - -#define PDEBUG(n, args...) -#define PDEBUG2(n, args...) - -#endif /* PRISM2_NO_DEBUG */ - -enum { BAP0 = 0, BAP1 = 1 }; - -#define PRISM2_IO_DEBUG_CMD_INB 0 -#define PRISM2_IO_DEBUG_CMD_INW 1 -#define PRISM2_IO_DEBUG_CMD_INSW 2 -#define PRISM2_IO_DEBUG_CMD_OUTB 3 -#define PRISM2_IO_DEBUG_CMD_OUTW 4 -#define PRISM2_IO_DEBUG_CMD_OUTSW 5 -#define PRISM2_IO_DEBUG_CMD_ERROR 6 -#define PRISM2_IO_DEBUG_CMD_INTERRUPT 7 - -#ifdef PRISM2_IO_DEBUG - -#define PRISM2_IO_DEBUG_ENTRY(cmd, reg, value) \ -(((cmd) << 24) | ((reg) << 16) | value) - -static inline void prism2_io_debug_add(struct net_device *dev, int cmd, - int reg, int value) -{ - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - - if (!local->io_debug_enabled) - return; - - local->io_debug[local->io_debug_head] = jiffies & 0xffffffff; - if (++local->io_debug_head >= PRISM2_IO_DEBUG_SIZE) - local->io_debug_head = 0; - local->io_debug[local->io_debug_head] = - PRISM2_IO_DEBUG_ENTRY(cmd, reg, value); - if (++local->io_debug_head >= PRISM2_IO_DEBUG_SIZE) - local->io_debug_head = 0; -} - - -static inline void prism2_io_debug_error(struct net_device *dev, int err) -{ - struct hostap_interface *iface = netdev_priv(dev); - local_info_t *local = iface->local; - unsigned long flags; - - if (!local->io_debug_enabled) - return; - - spin_lock_irqsave(&local->lock, flags); - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_ERROR, 0, err); - if (local->io_debug_enabled == 1) { - local->io_debug_enabled = 0; - printk(KERN_DEBUG "%s: I/O debug stopped\n", dev->name); - } - spin_unlock_irqrestore(&local->lock, flags); -} - -#else /* PRISM2_IO_DEBUG */ - -static inline void prism2_io_debug_add(struct net_device *dev, int cmd, - int reg, int value) -{ -} - -static inline void prism2_io_debug_error(struct net_device *dev, int err) -{ -} - -#endif /* PRISM2_IO_DEBUG */ - - -#ifdef PRISM2_CALLBACK -enum { - /* Called when card is enabled */ - PRISM2_CALLBACK_ENABLE, - - /* Called when card is disabled */ - PRISM2_CALLBACK_DISABLE, - - /* Called when RX/TX starts/ends */ - PRISM2_CALLBACK_RX_START, PRISM2_CALLBACK_RX_END, - PRISM2_CALLBACK_TX_START, PRISM2_CALLBACK_TX_END -}; -void prism2_callback(local_info_t *local, int event); -#else /* PRISM2_CALLBACK */ -#define prism2_callback(d, e) do { } while (0) -#endif /* PRISM2_CALLBACK */ - -#endif /* __KERNEL__ */ - -#endif /* HOSTAP_WLAN_H */ diff --git a/drivers/net/wireless/intersil/orinoco/Kconfig b/drivers/net/wireless/intersil/orinoco/Kconfig deleted file mode 100644 index f62730aa7b..0000000000 --- a/drivers/net/wireless/intersil/orinoco/Kconfig +++ /dev/null @@ -1,143 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config HERMES - tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" - depends on (PPC_PMAC || PCI || PCMCIA) - depends on CFG80211 - select CFG80211_WEXT_EXPORT - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - select FW_LOADER - select CRYPTO - select CRYPTO_MICHAEL_MIC - help - A driver for 802.11b wireless cards based on the "Hermes" or - Intersil HFA384x (Prism 2) MAC controller. This includes the vast - majority of the PCMCIA 802.11b cards (which are nearly all rebadges) - - except for the Cisco/Aironet cards. Cards supported include the - Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, - Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, - IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear - MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel - IPW2011, and Symbol Spectrum24 High Rate amongst others. - - This option includes the guts of the driver, but in order to - actually use a card you will also need to enable support for PCMCIA - Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. - - You will also very likely also need the Wireless Tools in order to - configure your card and that /etc/pcmcia/wireless.opts works : - <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> - -config HERMES_PRISM - bool "Support Prism 2/2.5 chipset" - depends on HERMES - help - - Say Y to enable support for Prism 2 and 2.5 chipsets. These - chipsets are better handled by the hostap driver. This driver - would not support WPA or firmware download for Prism chipset. - - If you are not sure, say N. - -config HERMES_CACHE_FW_ON_INIT - bool "Cache Hermes firmware on driver initialisation" - depends on HERMES - default y - help - Say Y to cache any firmware required by the Hermes drivers - on startup. The firmware will remain cached until the - driver is unloaded. The cache uses 64K of RAM. - - Otherwise load the firmware from userspace as required. In - this case the driver should be unloaded and restarted - whenever the firmware is changed. - - If you are not sure, say Y. - -config APPLE_AIRPORT - tristate "Apple Airport support (built-in)" - depends on PPC_PMAC && HERMES - help - Say Y here to support the Airport 802.11b wireless Ethernet hardware - built into the Macintosh iBook and other recent PowerPC-based - Macintosh machines. This is essentially a Lucent Orinoco card with - a non-standard interface. - - This driver does not support the Airport Extreme (802.11b/g). Use - the BCM43xx driver for Airport Extreme cards. - -config PLX_HERMES - tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in PLX9052 based PCI adaptors. These - adaptors are not a full PCMCIA controller but act as a more limited - PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that - 802.11b PCMCIA cards can be used in desktop machines. The Netgear - MA301 is such an adaptor. - -config TMD_HERMES - tristate "Hermes in TMD7160 based PCI adaptor support" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in TMD7160 based PCI adaptors. These - adaptors are not a full PCMCIA controller but act as a more limited - PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that - 802.11b PCMCIA cards can be used in desktop machines. - -config NORTEL_HERMES - tristate "Nortel emobility PCI adaptor support" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in Nortel emobility PCI adaptors. These - adaptors are not full PCMCIA controllers, but act as a more limited - PCI <-> PCMCIA bridge. - -config PCI_HERMES - tristate "Prism 2.5 PCI 802.11b adaptor support" - depends on PCI && HERMES && HERMES_PRISM - help - Enable support for PCI and mini-PCI 802.11b wireless NICs based on - the Prism 2.5 chipset. These are true PCI cards, not the 802.11b - PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also - common. Some of the built-in wireless adaptors in laptops are of - this variety. - -config PCMCIA_HERMES - tristate "Hermes PCMCIA card support" - depends on PCMCIA && HERMES && HAS_IOPORT_MAP - help - A driver for "Hermes" chipset based PCMCIA wireless adaptors, such - as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ - EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and - others). It should also be usable on various Prism II based cards - such as the Linksys, D-Link and Farallon Skyline. It should also - work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. - - You will very likely need the Wireless Tools in order to - configure your card and that /etc/pcmcia/wireless.opts works: - <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. - -config PCMCIA_SPECTRUM - tristate "Symbol Spectrum24 Trilogy PCMCIA card support" - depends on PCMCIA && HERMES && HAS_IOPORT_MAP - help - - This is a driver for 802.11b cards using RAM-loadable Symbol - firmware, such as Symbol Wireless Networker LA4100, CompactFlash - cards by Socket Communications and Intel PRO/Wireless 2011B. - - This driver requires firmware download on startup. Utilities - for downloading Symbol firmware are available at - <http://sourceforge.net/projects/orinoco/> - -config ORINOCO_USB - tristate "Agere Orinoco USB support" - depends on USB && HERMES - select FW_LOADER - help - This driver is for USB versions of the Agere Orinoco card. diff --git a/drivers/net/wireless/intersil/orinoco/Makefile b/drivers/net/wireless/intersil/orinoco/Makefile deleted file mode 100644 index 0c29c56c88..0000000000 --- a/drivers/net/wireless/intersil/orinoco/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the orinoco wireless device drivers. -# -orinoco-objs := main.o fw.o hw.o mic.o scan.o wext.o hermes_dld.o hermes.o cfg.o - -obj-$(CONFIG_HERMES) += orinoco.o -obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o -obj-$(CONFIG_APPLE_AIRPORT) += airport.o -obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o -obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o -obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o -obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o -obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o -obj-$(CONFIG_ORINOCO_USB) += orinoco_usb.o diff --git a/drivers/net/wireless/intersil/orinoco/airport.c b/drivers/net/wireless/intersil/orinoco/airport.c deleted file mode 100644 index 45ac00fdaf..0000000000 --- a/drivers/net/wireless/intersil/orinoco/airport.c +++ /dev/null @@ -1,268 +0,0 @@ -/* airport.c - * - * A driver for "Hermes" chipset based Apple Airport wireless - * card. - * - * Copyright notice & release notes in file main.c - * - * Note specific to airport stub: - * - * 0.05 : first version of the new split driver - * 0.06 : fix possible hang on powerup, add sleep support - */ - -#define DRIVER_NAME "airport" -#define PFX DRIVER_NAME ": " - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/mod_devicetable.h> -#include <asm/pmac_feature.h> - -#include "orinoco.h" - -#define AIRPORT_IO_LEN (0x1000) /* one page */ - -struct airport { - struct macio_dev *mdev; - void __iomem *vaddr; - unsigned int irq; - int irq_requested; - int ndev_registered; -}; - -static int -airport_suspend(struct macio_dev *mdev, pm_message_t state) -{ - struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); - struct net_device *dev = priv->ndev; - struct airport *card = priv->card; - unsigned long flags; - int err; - - printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name); - - err = orinoco_lock(priv, &flags); - if (err) { - printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n", - dev->name); - return 0; - } - - orinoco_down(priv); - orinoco_unlock(priv, &flags); - - disable_irq(card->irq); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, - macio_get_of_node(mdev), 0, 0); - - return 0; -} - -static int -airport_resume(struct macio_dev *mdev) -{ - struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); - struct net_device *dev = priv->ndev; - struct airport *card = priv->card; - unsigned long flags; - int err; - - printk(KERN_DEBUG "%s: Airport waking up\n", dev->name); - - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, - macio_get_of_node(mdev), 0, 1); - msleep(200); - - enable_irq(card->irq); - - priv->hw.ops->lock_irqsave(&priv->lock, &flags); - err = orinoco_up(priv); - priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); - - return err; -} - -static int -airport_detach(struct macio_dev *mdev) -{ - struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); - struct airport *card = priv->card; - - if (card->ndev_registered) - orinoco_if_del(priv); - card->ndev_registered = 0; - - if (card->irq_requested) - free_irq(card->irq, priv); - card->irq_requested = 0; - - if (card->vaddr) - iounmap(card->vaddr); - card->vaddr = NULL; - - macio_release_resource(mdev, 0); - - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, - macio_get_of_node(mdev), 0, 0); - ssleep(1); - - macio_set_drvdata(mdev, NULL); - free_orinocodev(priv); - - return 0; -} - -static int airport_hard_reset(struct orinoco_private *priv) -{ - /* It would be nice to power cycle the Airport for a real hard - * reset, but for some reason although it appears to - * re-initialize properly, it falls in a screaming heap - * shortly afterwards. */ -#if 0 - struct airport *card = priv->card; - - /* Vitally important. If we don't do this it seems we get an - * interrupt somewhere during the power cycle, since - * hw_unavailable is already set it doesn't get ACKed, we get - * into an interrupt loop and the PMU decides to turn us - * off. */ - disable_irq(card->irq); - - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, - macio_get_of_node(card->mdev), 0, 0); - ssleep(1); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, - macio_get_of_node(card->mdev), 0, 1); - ssleep(1); - - enable_irq(card->irq); - ssleep(1); -#endif - - return 0; -} - -static int -airport_attach(struct macio_dev *mdev, const struct of_device_id *match) -{ - struct orinoco_private *priv; - struct airport *card; - unsigned long phys_addr; - struct hermes *hw; - - if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) { - printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n"); - return -ENODEV; - } - - /* Allocate space for private device-specific data */ - priv = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev, - airport_hard_reset, NULL); - if (!priv) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - return -ENODEV; - } - card = priv->card; - - hw = &priv->hw; - card->mdev = mdev; - - if (macio_request_resource(mdev, 0, DRIVER_NAME)) { - printk(KERN_ERR PFX "can't request IO resource !\n"); - free_orinocodev(priv); - return -EBUSY; - } - - macio_set_drvdata(mdev, priv); - - /* Setup interrupts & base address */ - card->irq = macio_irq(mdev, 0); - phys_addr = macio_resource_start(mdev, 0); /* Physical address */ - printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr); - card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN); - if (!card->vaddr) { - printk(KERN_ERR PFX "ioremap() failed\n"); - goto failed; - } - - hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING); - - /* Power up card */ - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, - macio_get_of_node(mdev), 0, 1); - ssleep(1); - - /* Reset it before we get the interrupt */ - hw->ops->init(hw); - - if (request_irq(card->irq, orinoco_interrupt, 0, DRIVER_NAME, priv)) { - printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq); - goto failed; - } - card->irq_requested = 1; - - /* Initialise the main driver */ - if (orinoco_init(priv) != 0) { - printk(KERN_ERR PFX "orinoco_init() failed\n"); - goto failed; - } - - /* Register an interface with the stack */ - if (orinoco_if_add(priv, phys_addr, card->irq, NULL) != 0) { - printk(KERN_ERR PFX "orinoco_if_add() failed\n"); - goto failed; - } - card->ndev_registered = 1; - return 0; - failed: - airport_detach(mdev); - return -ENODEV; -} /* airport_attach */ - - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Benjamin Herrenschmidt <benh@kernel.crashing.org>)"; -MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); -MODULE_DESCRIPTION("Driver for the Apple Airport wireless card."); -MODULE_LICENSE("Dual MPL/GPL"); - -static const struct of_device_id airport_match[] = { - { - .name = "radio", - }, - {}, -}; - -MODULE_DEVICE_TABLE(of, airport_match); - -static struct macio_driver airport_driver = { - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - .of_match_table = airport_match, - }, - .probe = airport_attach, - .remove = airport_detach, - .suspend = airport_suspend, - .resume = airport_resume, -}; - -static int __init -init_airport(void) -{ - printk(KERN_DEBUG "%s\n", version); - - return macio_register_driver(&airport_driver); -} - -static void __exit -exit_airport(void) -{ - macio_unregister_driver(&airport_driver); -} - -module_init(init_airport); -module_exit(exit_airport); diff --git a/drivers/net/wireless/intersil/orinoco/cfg.c b/drivers/net/wireless/intersil/orinoco/cfg.c deleted file mode 100644 index b2d5ec8634..0000000000 --- a/drivers/net/wireless/intersil/orinoco/cfg.c +++ /dev/null @@ -1,291 +0,0 @@ -/* cfg80211 support - * - * See copyright notice in main.c - */ -#include <linux/ieee80211.h> -#include <net/cfg80211.h> -#include "hw.h" -#include "main.h" -#include "orinoco.h" - -#include "cfg.h" - -/* Supported bitrates. Must agree with hw.c */ -static struct ieee80211_rate orinoco_rates[] = { - { .bitrate = 10 }, - { .bitrate = 20 }, - { .bitrate = 55 }, - { .bitrate = 110 }, -}; - -static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid; - -/* Called after orinoco_private is allocated. */ -void orinoco_wiphy_init(struct wiphy *wiphy) -{ - struct orinoco_private *priv = wiphy_priv(wiphy); - - wiphy->privid = orinoco_wiphy_privid; - - set_wiphy_dev(wiphy, priv->dev); -} - -/* Called after firmware is initialised */ -int orinoco_wiphy_register(struct wiphy *wiphy) -{ - struct orinoco_private *priv = wiphy_priv(wiphy); - int i, channels = 0; - - if (priv->firmware_type == FIRMWARE_TYPE_AGERE) - wiphy->max_scan_ssids = 1; - else - wiphy->max_scan_ssids = 0; - - wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - - /* TODO: should we set if we only have demo ad-hoc? - * (priv->has_port3) - */ - if (priv->has_ibss) - wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); - - if (!priv->broken_monitor || force_monitor) - wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); - - priv->band.bitrates = orinoco_rates; - priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates); - - /* Only support channels allowed by the card EEPROM */ - for (i = 0; i < NUM_CHANNELS; i++) { - if (priv->channel_mask & (1 << i)) { - priv->channels[i].center_freq = - ieee80211_channel_to_frequency(i + 1, - NL80211_BAND_2GHZ); - channels++; - } - } - priv->band.channels = priv->channels; - priv->band.n_channels = channels; - - wiphy->bands[NL80211_BAND_2GHZ] = &priv->band; - wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; - - i = 0; - if (priv->has_wep) { - priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40; - i++; - - if (priv->has_big_wep) { - priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104; - i++; - } - } - if (priv->has_wpa) { - priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP; - i++; - } - wiphy->cipher_suites = priv->cipher_suites; - wiphy->n_cipher_suites = i; - - wiphy->rts_threshold = priv->rts_thresh; - if (!priv->has_mwo) - wiphy->frag_threshold = priv->frag_thresh + 1; - wiphy->retry_short = priv->short_retry_limit; - wiphy->retry_long = priv->long_retry_limit; - - return wiphy_register(wiphy); -} - -static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev, - enum nl80211_iftype type, - struct vif_params *params) -{ - struct orinoco_private *priv = wiphy_priv(wiphy); - int err = 0; - unsigned long lock; - - if (orinoco_lock(priv, &lock) != 0) - return -EBUSY; - - switch (type) { - case NL80211_IFTYPE_ADHOC: - if (!priv->has_ibss && !priv->has_port3) - err = -EINVAL; - break; - - case NL80211_IFTYPE_STATION: - break; - - case NL80211_IFTYPE_MONITOR: - if (priv->broken_monitor && !force_monitor) { - wiphy_warn(wiphy, - "Monitor mode support is buggy in this firmware, not enabling\n"); - err = -EINVAL; - } - break; - - default: - err = -EINVAL; - } - - if (!err) { - priv->iw_mode = type; - set_port_type(priv); - err = orinoco_commit(priv); - } - - orinoco_unlock(priv, &lock); - - return err; -} - -static int orinoco_scan(struct wiphy *wiphy, - struct cfg80211_scan_request *request) -{ - struct orinoco_private *priv = wiphy_priv(wiphy); - int err; - - if (!request) - return -EINVAL; - - if (priv->scan_request && priv->scan_request != request) - return -EBUSY; - - priv->scan_request = request; - - err = orinoco_hw_trigger_scan(priv, request->ssids); - /* On error the we aren't processing the request */ - if (err) - priv->scan_request = NULL; - - return err; -} - -static int orinoco_set_monitor_channel(struct wiphy *wiphy, - struct cfg80211_chan_def *chandef) -{ - struct orinoco_private *priv = wiphy_priv(wiphy); - int err = 0; - unsigned long flags; - int channel; - - if (!chandef->chan) - return -EINVAL; - - if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT) - return -EINVAL; - - if (chandef->chan->band != NL80211_BAND_2GHZ) - return -EINVAL; - - channel = ieee80211_frequency_to_channel(chandef->chan->center_freq); - - if ((channel < 1) || (channel > NUM_CHANNELS) || - !(priv->channel_mask & (1 << (channel - 1)))) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - priv->channel = channel; - if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { - /* Fast channel change - no commit if successful */ - struct hermes *hw = &priv->hw; - err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_SET_CHANNEL, - channel, NULL); - } - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed) -{ - struct orinoco_private *priv = wiphy_priv(wiphy); - int frag_value = -1; - int rts_value = -1; - int err = 0; - - if (changed & WIPHY_PARAM_RETRY_SHORT) { - /* Setting short retry not supported */ - err = -EINVAL; - } - - if (changed & WIPHY_PARAM_RETRY_LONG) { - /* Setting long retry not supported */ - err = -EINVAL; - } - - if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { - /* Set fragmentation */ - if (priv->has_mwo) { - if (wiphy->frag_threshold == -1) - frag_value = 0; - else { - printk(KERN_WARNING "%s: Fixed fragmentation " - "is not supported on this firmware. " - "Using MWO robust instead.\n", - priv->ndev->name); - frag_value = 1; - } - } else { - if (wiphy->frag_threshold == -1) - frag_value = 2346; - else if ((wiphy->frag_threshold < 257) || - (wiphy->frag_threshold > 2347)) - err = -EINVAL; - else - /* cfg80211 value is 257-2347 (odd only) - * orinoco rid has range 256-2346 (even only) */ - frag_value = wiphy->frag_threshold & ~0x1; - } - } - - if (changed & WIPHY_PARAM_RTS_THRESHOLD) { - /* Set RTS. - * - * Prism documentation suggests default of 2432, - * and a range of 0-3000. - * - * Current implementation uses 2347 as the default and - * the upper limit. - */ - - if (wiphy->rts_threshold == -1) - rts_value = 2347; - else if (wiphy->rts_threshold > 2347) - err = -EINVAL; - else - rts_value = wiphy->rts_threshold; - } - - if (!err) { - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (frag_value >= 0) { - if (priv->has_mwo) - priv->mwo_robust = frag_value; - else - priv->frag_thresh = frag_value; - } - if (rts_value >= 0) - priv->rts_thresh = rts_value; - - err = orinoco_commit(priv); - - orinoco_unlock(priv, &flags); - } - - return err; -} - -const struct cfg80211_ops orinoco_cfg_ops = { - .change_virtual_intf = orinoco_change_vif, - .set_monitor_channel = orinoco_set_monitor_channel, - .scan = orinoco_scan, - .set_wiphy_params = orinoco_set_wiphy_params, -}; diff --git a/drivers/net/wireless/intersil/orinoco/cfg.h b/drivers/net/wireless/intersil/orinoco/cfg.h deleted file mode 100644 index 3ddc96a06c..0000000000 --- a/drivers/net/wireless/intersil/orinoco/cfg.h +++ /dev/null @@ -1,15 +0,0 @@ -/* cfg80211 support. - * - * See copyright notice in main.c - */ -#ifndef ORINOCO_CFG_H -#define ORINOCO_CFG_H - -#include <net/cfg80211.h> - -extern const struct cfg80211_ops orinoco_cfg_ops; - -void orinoco_wiphy_init(struct wiphy *wiphy); -int orinoco_wiphy_register(struct wiphy *wiphy); - -#endif /* ORINOCO_CFG_H */ diff --git a/drivers/net/wireless/intersil/orinoco/fw.c b/drivers/net/wireless/intersil/orinoco/fw.c deleted file mode 100644 index 015af78288..0000000000 --- a/drivers/net/wireless/intersil/orinoco/fw.c +++ /dev/null @@ -1,387 +0,0 @@ -/* Firmware file reading and download helpers - * - * See copyright notice in main.c - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/firmware.h> -#include <linux/device.h> -#include <linux/module.h> - -#include "hermes.h" -#include "hermes_dld.h" -#include "orinoco.h" - -#include "fw.h" - -/* End markers (for Symbol firmware only) */ -#define TEXT_END 0x1A /* End of text header */ - -struct fw_info { - char *pri_fw; - char *sta_fw; - char *ap_fw; - u32 pda_addr; - u16 pda_size; -}; - -static const struct fw_info orinoco_fw[] = { - { NULL, "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 }, - { NULL, "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, - { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", NULL, 0x00003100, 512 } -}; -MODULE_FIRMWARE("agere_sta_fw.bin"); -MODULE_FIRMWARE("agere_ap_fw.bin"); -MODULE_FIRMWARE("prism_sta_fw.bin"); -MODULE_FIRMWARE("prism_ap_fw.bin"); -MODULE_FIRMWARE("symbol_sp24t_prim_fw"); -MODULE_FIRMWARE("symbol_sp24t_sec_fw"); - -/* Structure used to access fields in FW - * Make sure LE decoding macros are used - */ -struct orinoco_fw_header { - char hdr_vers[6]; /* ASCII string for header version */ - __le16 headersize; /* Total length of header */ - __le32 entry_point; /* NIC entry point */ - __le32 blocks; /* Number of blocks to program */ - __le32 block_offset; /* Offset of block data from eof header */ - __le32 pdr_offset; /* Offset to PDR data from eof header */ - __le32 pri_offset; /* Offset to primary plug data */ - __le32 compat_offset; /* Offset to compatibility data*/ - char signature[]; /* FW signature length headersize-20 */ -} __packed; - -/* Check the range of various header entries. Return a pointer to a - * description of the problem, or NULL if everything checks out. */ -static const char *validate_fw(const struct orinoco_fw_header *hdr, size_t len) -{ - u16 hdrsize; - - if (len < sizeof(*hdr)) - return "image too small"; - if (memcmp(hdr->hdr_vers, "HFW", 3) != 0) - return "format not recognised"; - - hdrsize = le16_to_cpu(hdr->headersize); - if (hdrsize > len) - return "bad headersize"; - if ((hdrsize + le32_to_cpu(hdr->block_offset)) > len) - return "bad block offset"; - if ((hdrsize + le32_to_cpu(hdr->pdr_offset)) > len) - return "bad PDR offset"; - if ((hdrsize + le32_to_cpu(hdr->pri_offset)) > len) - return "bad PRI offset"; - if ((hdrsize + le32_to_cpu(hdr->compat_offset)) > len) - return "bad compat offset"; - - /* TODO: consider adding a checksum or CRC to the firmware format */ - return NULL; -} - -#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) -static inline const struct firmware * -orinoco_cached_fw_get(struct orinoco_private *priv, bool primary) -{ - if (primary) - return priv->cached_pri_fw; - else - return priv->cached_fw; -} -#else -#define orinoco_cached_fw_get(priv, primary) (NULL) -#endif - -/* Download either STA or AP firmware into the card. */ -static int -orinoco_dl_firmware(struct orinoco_private *priv, - const struct fw_info *fw, - int ap) -{ - /* Plug Data Area (PDA) */ - __le16 *pda; - - struct hermes *hw = &priv->hw; - const struct firmware *fw_entry; - const struct orinoco_fw_header *hdr; - const unsigned char *first_block; - const void *end; - const char *firmware; - const char *fw_err; - struct device *dev = priv->dev; - int err = 0; - - pda = kzalloc(fw->pda_size, GFP_KERNEL); - if (!pda) - return -ENOMEM; - - if (ap) - firmware = fw->ap_fw; - else - firmware = fw->sta_fw; - - dev_dbg(dev, "Attempting to download firmware %s\n", firmware); - - /* Read current plug data */ - err = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size); - dev_dbg(dev, "Read PDA returned %d\n", err); - if (err) - goto free; - - if (!orinoco_cached_fw_get(priv, false)) { - err = request_firmware(&fw_entry, firmware, priv->dev); - - if (err) { - dev_err(dev, "Cannot find firmware %s\n", firmware); - err = -ENOENT; - goto free; - } - } else - fw_entry = orinoco_cached_fw_get(priv, false); - - hdr = (const struct orinoco_fw_header *) fw_entry->data; - - fw_err = validate_fw(hdr, fw_entry->size); - if (fw_err) { - dev_warn(dev, "Invalid firmware image detected (%s). " - "Aborting download\n", fw_err); - err = -EINVAL; - goto abort; - } - - /* Enable aux port to allow programming */ - err = hw->ops->program_init(hw, le32_to_cpu(hdr->entry_point)); - dev_dbg(dev, "Program init returned %d\n", err); - if (err != 0) - goto abort; - - /* Program data */ - first_block = (fw_entry->data + - le16_to_cpu(hdr->headersize) + - le32_to_cpu(hdr->block_offset)); - end = fw_entry->data + fw_entry->size; - - err = hermes_program(hw, first_block, end); - dev_dbg(dev, "Program returned %d\n", err); - if (err != 0) - goto abort; - - /* Update production data */ - first_block = (fw_entry->data + - le16_to_cpu(hdr->headersize) + - le32_to_cpu(hdr->pdr_offset)); - - err = hermes_apply_pda_with_defaults(hw, first_block, end, pda, - &pda[fw->pda_size / sizeof(*pda)]); - dev_dbg(dev, "Apply PDA returned %d\n", err); - if (err) - goto abort; - - /* Tell card we've finished */ - err = hw->ops->program_end(hw); - dev_dbg(dev, "Program end returned %d\n", err); - if (err != 0) - goto abort; - - /* Check if we're running */ - dev_dbg(dev, "hermes_present returned %d\n", hermes_present(hw)); - -abort: - /* If we requested the firmware, release it. */ - if (!orinoco_cached_fw_get(priv, false)) - release_firmware(fw_entry); - -free: - kfree(pda); - return err; -} - -/* - * Process a firmware image - stop the card, load the firmware, reset - * the card and make sure it responds. For the secondary firmware take - * care of the PDA - read it and then write it on top of the firmware. - */ -static int -symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, - const unsigned char *image, const void *end, - int secondary) -{ - struct hermes *hw = &priv->hw; - int ret = 0; - const unsigned char *ptr; - const unsigned char *first_block; - - /* Plug Data Area (PDA) */ - __le16 *pda = NULL; - - /* Binary block begins after the 0x1A marker */ - ptr = image; - while (*ptr++ != TEXT_END); - first_block = ptr; - - /* Read the PDA from EEPROM */ - if (secondary) { - pda = kzalloc(fw->pda_size, GFP_KERNEL); - if (!pda) - return -ENOMEM; - - ret = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size); - if (ret) - goto free; - } - - /* Stop the firmware, so that it can be safely rewritten */ - if (priv->stop_fw) { - ret = priv->stop_fw(priv, 1); - if (ret) - goto free; - } - - /* Program the adapter with new firmware */ - ret = hermes_program(hw, first_block, end); - if (ret) - goto free; - - /* Write the PDA to the adapter */ - if (secondary) { - size_t len = hermes_blocks_length(first_block, end); - ptr = first_block + len; - ret = hermes_apply_pda(hw, ptr, end, pda, - &pda[fw->pda_size / sizeof(*pda)]); - kfree(pda); - if (ret) - return ret; - } - - /* Run the firmware */ - if (priv->stop_fw) { - ret = priv->stop_fw(priv, 0); - if (ret) - return ret; - } - - /* Reset hermes chip and make sure it responds */ - ret = hw->ops->init(hw); - - /* hermes_reset() should return 0 with the secondary firmware */ - if (secondary && ret != 0) - return -ENODEV; - - /* And this should work with any firmware */ - if (!hermes_present(hw)) - return -ENODEV; - - return 0; - -free: - kfree(pda); - return ret; -} - - -/* - * Download the firmware into the card, this also does a PCMCIA soft - * reset on the card, to make sure it's in a sane state. - */ -static int -symbol_dl_firmware(struct orinoco_private *priv, - const struct fw_info *fw) -{ - struct device *dev = priv->dev; - int ret; - const struct firmware *fw_entry; - - if (!orinoco_cached_fw_get(priv, true)) { - if (request_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) { - dev_err(dev, "Cannot find firmware: %s\n", fw->pri_fw); - return -ENOENT; - } - } else - fw_entry = orinoco_cached_fw_get(priv, true); - - /* Load primary firmware */ - ret = symbol_dl_image(priv, fw, fw_entry->data, - fw_entry->data + fw_entry->size, 0); - - if (!orinoco_cached_fw_get(priv, true)) - release_firmware(fw_entry); - if (ret) { - dev_err(dev, "Primary firmware download failed\n"); - return ret; - } - - if (!orinoco_cached_fw_get(priv, false)) { - if (request_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) { - dev_err(dev, "Cannot find firmware: %s\n", fw->sta_fw); - return -ENOENT; - } - } else - fw_entry = orinoco_cached_fw_get(priv, false); - - /* Load secondary firmware */ - ret = symbol_dl_image(priv, fw, fw_entry->data, - fw_entry->data + fw_entry->size, 1); - if (!orinoco_cached_fw_get(priv, false)) - release_firmware(fw_entry); - if (ret) - dev_err(dev, "Secondary firmware download failed\n"); - - return ret; -} - -int orinoco_download(struct orinoco_private *priv) -{ - int err = 0; - /* Reload firmware */ - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - /* case FIRMWARE_TYPE_INTERSIL: */ - err = orinoco_dl_firmware(priv, - &orinoco_fw[priv->firmware_type], 0); - break; - - case FIRMWARE_TYPE_SYMBOL: - err = symbol_dl_firmware(priv, - &orinoco_fw[priv->firmware_type]); - break; - case FIRMWARE_TYPE_INTERSIL: - break; - } - /* TODO: if we fail we probably need to reinitialise - * the driver */ - - return err; -} - -#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) -void orinoco_cache_fw(struct orinoco_private *priv, int ap) -{ - const struct firmware *fw_entry = NULL; - const char *pri_fw; - const char *fw; - - pri_fw = orinoco_fw[priv->firmware_type].pri_fw; - if (ap) - fw = orinoco_fw[priv->firmware_type].ap_fw; - else - fw = orinoco_fw[priv->firmware_type].sta_fw; - - if (pri_fw) { - if (request_firmware(&fw_entry, pri_fw, priv->dev) == 0) - priv->cached_pri_fw = fw_entry; - } - - if (fw) { - if (request_firmware(&fw_entry, fw, priv->dev) == 0) - priv->cached_fw = fw_entry; - } -} - -void orinoco_uncache_fw(struct orinoco_private *priv) -{ - release_firmware(priv->cached_pri_fw); - release_firmware(priv->cached_fw); - priv->cached_pri_fw = NULL; - priv->cached_fw = NULL; -} -#endif diff --git a/drivers/net/wireless/intersil/orinoco/fw.h b/drivers/net/wireless/intersil/orinoco/fw.h deleted file mode 100644 index aca63e3c4b..0000000000 --- a/drivers/net/wireless/intersil/orinoco/fw.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Firmware file reading and download helpers - * - * See copyright notice in main.c - */ -#ifndef _ORINOCO_FW_H_ -#define _ORINOCO_FW_H_ - -/* Forward declations */ -struct orinoco_private; - -int orinoco_download(struct orinoco_private *priv); - -#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) -void orinoco_cache_fw(struct orinoco_private *priv, int ap); -void orinoco_uncache_fw(struct orinoco_private *priv); -#else -#define orinoco_cache_fw(priv, ap) do { } while (0) -#define orinoco_uncache_fw(priv) do { } while (0) -#endif - -#endif /* _ORINOCO_FW_H_ */ diff --git a/drivers/net/wireless/intersil/orinoco/hermes.c b/drivers/net/wireless/intersil/orinoco/hermes.c deleted file mode 100644 index 4888286727..0000000000 --- a/drivers/net/wireless/intersil/orinoco/hermes.c +++ /dev/null @@ -1,778 +0,0 @@ -/* hermes.c - * - * Driver core for the "Hermes" wireless MAC controller, as used in - * the Lucent Orinoco and Cabletron RoamAbout cards. It should also - * work on the hfa3841 and hfa3842 MAC controller chips used in the - * Prism II chipsets. - * - * This is not a complete driver, just low-level access routines for - * the MAC controller itself. - * - * Based on the prism2 driver from Absolute Value Systems' linux-wlan - * project, the Linux wvlan_cs driver, Lucent's HCF-Light - * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no - * particular order). - * - * Copyright (C) 2000, David Gibson, Linuxcare Australia. - * (C) Copyright David Gibson, IBM Corp. 2001-2003. - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#include <linux/net.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/delay.h> - -#include "hermes.h" - -/* These are maximum timeouts. Most often, card wil react much faster */ -#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */ -#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */ -#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */ -#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */ - -/* - * AUX port access. To unlock the AUX port write the access keys to the - * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL - * register. Then read it and make sure it's HERMES_AUX_ENABLED. - */ -#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ -#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ -#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ -#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ - -#define HERMES_AUX_PW0 0xFE01 -#define HERMES_AUX_PW1 0xDC23 -#define HERMES_AUX_PW2 0xBA45 - -/* HERMES_CMD_DOWNLD */ -#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) - -/* - * Debugging helpers - */ - -#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \ - printk(stuff); } while (0) - -#undef HERMES_DEBUG -#ifdef HERMES_DEBUG - -#define DEBUG(lvl, stuff...) if ((lvl) <= HERMES_DEBUG) DMSG(stuff) - -#else /* ! HERMES_DEBUG */ - -#define DEBUG(lvl, stuff...) do { } while (0) - -#endif /* ! HERMES_DEBUG */ - -static const struct hermes_ops hermes_ops_local; - -/* - * Internal functions - */ - -/* Issue a command to the chip. Waiting for it to complete is the caller's - problem. - - Returns -EBUSY if the command register is busy, 0 on success. - - Callable from any context. -*/ -static int hermes_issue_cmd(struct hermes *hw, u16 cmd, u16 param0, - u16 param1, u16 param2) -{ - int k = CMD_BUSY_TIMEOUT; - u16 reg; - - /* First wait for the command register to unbusy */ - reg = hermes_read_regn(hw, CMD); - while ((reg & HERMES_CMD_BUSY) && k) { - k--; - udelay(1); - reg = hermes_read_regn(hw, CMD); - } - if (reg & HERMES_CMD_BUSY) - return -EBUSY; - - hermes_write_regn(hw, PARAM2, param2); - hermes_write_regn(hw, PARAM1, param1); - hermes_write_regn(hw, PARAM0, param0); - hermes_write_regn(hw, CMD, cmd); - - return 0; -} - -/* - * Function definitions - */ - -/* For doing cmds that wipe the magic constant in SWSUPPORT0 */ -static int hermes_doicmd_wait(struct hermes *hw, u16 cmd, - u16 parm0, u16 parm1, u16 parm2, - struct hermes_response *resp) -{ - int err = 0; - int k; - u16 status, reg; - - err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2); - if (err) - return err; - - reg = hermes_read_regn(hw, EVSTAT); - k = CMD_INIT_TIMEOUT; - while ((!(reg & HERMES_EV_CMD)) && k) { - k--; - udelay(10); - reg = hermes_read_regn(hw, EVSTAT); - } - - hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); - - if (!hermes_present(hw)) { - DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n", - hw->iobase); - err = -ENODEV; - goto out; - } - - if (!(reg & HERMES_EV_CMD)) { - printk(KERN_ERR "hermes @ %p: " - "Timeout waiting for card to reset (reg=0x%04x)!\n", - hw->iobase, reg); - err = -ETIMEDOUT; - goto out; - } - - status = hermes_read_regn(hw, STATUS); - if (resp) { - resp->status = status; - resp->resp0 = hermes_read_regn(hw, RESP0); - resp->resp1 = hermes_read_regn(hw, RESP1); - resp->resp2 = hermes_read_regn(hw, RESP2); - } - - hermes_write_regn(hw, EVACK, HERMES_EV_CMD); - - if (status & HERMES_STATUS_RESULT) - err = -EIO; -out: - return err; -} - -void hermes_struct_init(struct hermes *hw, void __iomem *address, - int reg_spacing) -{ - hw->iobase = address; - hw->reg_spacing = reg_spacing; - hw->inten = 0x0; - hw->eeprom_pda = false; - hw->ops = &hermes_ops_local; -} -EXPORT_SYMBOL(hermes_struct_init); - -static int hermes_init(struct hermes *hw) -{ - u16 reg; - int err = 0; - int k; - - /* We don't want to be interrupted while resetting the chipset */ - hw->inten = 0x0; - hermes_write_regn(hw, INTEN, 0); - hermes_write_regn(hw, EVACK, 0xffff); - - /* Normally it's a "can't happen" for the command register to - be busy when we go to issue a command because we are - serializing all commands. However we want to have some - chance of resetting the card even if it gets into a stupid - state, so we actually wait to see if the command register - will unbusy itself here. */ - k = CMD_BUSY_TIMEOUT; - reg = hermes_read_regn(hw, CMD); - while (k && (reg & HERMES_CMD_BUSY)) { - if (reg == 0xffff) /* Special case - the card has probably been - removed, so don't wait for the timeout */ - return -ENODEV; - - k--; - udelay(1); - reg = hermes_read_regn(hw, CMD); - } - - /* No need to explicitly handle the timeout - if we've timed - out hermes_issue_cmd() will probably return -EBUSY below */ - - /* According to the documentation, EVSTAT may contain - obsolete event occurrence information. We have to acknowledge - it by writing EVACK. */ - reg = hermes_read_regn(hw, EVSTAT); - hermes_write_regn(hw, EVACK, reg); - - /* We don't use hermes_docmd_wait here, because the reset wipes - the magic constant in SWSUPPORT0 away, and it gets confused */ - err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL); - - return err; -} - -/* Issue a command to the chip, and (busy!) wait for it to - * complete. - * - * Returns: - * < 0 on internal error - * 0 on success - * > 0 on error returned by the firmware - * - * Callable from any context, but locking is your problem. */ -static int hermes_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0, - struct hermes_response *resp) -{ - int err; - int k; - u16 reg; - u16 status; - - err = hermes_issue_cmd(hw, cmd, parm0, 0, 0); - if (err) { - if (!hermes_present(hw)) { - if (net_ratelimit()) - printk(KERN_WARNING "hermes @ %p: " - "Card removed while issuing command " - "0x%04x.\n", hw->iobase, cmd); - err = -ENODEV; - } else - if (net_ratelimit()) - printk(KERN_ERR "hermes @ %p: " - "Error %d issuing command 0x%04x.\n", - hw->iobase, err, cmd); - goto out; - } - - reg = hermes_read_regn(hw, EVSTAT); - k = CMD_COMPL_TIMEOUT; - while ((!(reg & HERMES_EV_CMD)) && k) { - k--; - udelay(10); - reg = hermes_read_regn(hw, EVSTAT); - } - - if (!hermes_present(hw)) { - printk(KERN_WARNING "hermes @ %p: Card removed " - "while waiting for command 0x%04x completion.\n", - hw->iobase, cmd); - err = -ENODEV; - goto out; - } - - if (!(reg & HERMES_EV_CMD)) { - printk(KERN_ERR "hermes @ %p: Timeout waiting for " - "command 0x%04x completion.\n", hw->iobase, cmd); - err = -ETIMEDOUT; - goto out; - } - - status = hermes_read_regn(hw, STATUS); - if (resp) { - resp->status = status; - resp->resp0 = hermes_read_regn(hw, RESP0); - resp->resp1 = hermes_read_regn(hw, RESP1); - resp->resp2 = hermes_read_regn(hw, RESP2); - } - - hermes_write_regn(hw, EVACK, HERMES_EV_CMD); - - if (status & HERMES_STATUS_RESULT) - err = -EIO; - - out: - return err; -} - -static int hermes_allocate(struct hermes *hw, u16 size, u16 *fid) -{ - int err = 0; - int k; - u16 reg; - - if ((size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX)) - return -EINVAL; - - err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL); - if (err) - return err; - - reg = hermes_read_regn(hw, EVSTAT); - k = ALLOC_COMPL_TIMEOUT; - while ((!(reg & HERMES_EV_ALLOC)) && k) { - k--; - udelay(10); - reg = hermes_read_regn(hw, EVSTAT); - } - - if (!hermes_present(hw)) { - printk(KERN_WARNING "hermes @ %p: " - "Card removed waiting for frame allocation.\n", - hw->iobase); - return -ENODEV; - } - - if (!(reg & HERMES_EV_ALLOC)) { - printk(KERN_ERR "hermes @ %p: " - "Timeout waiting for frame allocation\n", - hw->iobase); - return -ETIMEDOUT; - } - - *fid = hermes_read_regn(hw, ALLOCFID); - hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC); - - return 0; -} - -/* Set up a BAP to read a particular chunk of data from card's internal buffer. - * - * Returns: - * < 0 on internal failure (errno) - * 0 on success - * > 0 on error - * from firmware - * - * Callable from any context */ -static int hermes_bap_seek(struct hermes *hw, int bap, u16 id, u16 offset) -{ - int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0; - int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0; - int k; - u16 reg; - - /* Paranoia.. */ - if ((offset > HERMES_BAP_OFFSET_MAX) || (offset % 2)) - return -EINVAL; - - k = HERMES_BAP_BUSY_TIMEOUT; - reg = hermes_read_reg(hw, oreg); - while ((reg & HERMES_OFFSET_BUSY) && k) { - k--; - udelay(1); - reg = hermes_read_reg(hw, oreg); - } - - if (reg & HERMES_OFFSET_BUSY) - return -ETIMEDOUT; - - /* Now we actually set up the transfer */ - hermes_write_reg(hw, sreg, id); - hermes_write_reg(hw, oreg, offset); - - /* Wait for the BAP to be ready */ - k = HERMES_BAP_BUSY_TIMEOUT; - reg = hermes_read_reg(hw, oreg); - while ((reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) { - k--; - udelay(1); - reg = hermes_read_reg(hw, oreg); - } - - if (reg != offset) { - printk(KERN_ERR "hermes @ %p: BAP%d offset %s: " - "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap, - (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error", - reg, id, offset); - - if (reg & HERMES_OFFSET_BUSY) - return -ETIMEDOUT; - - return -EIO; /* error or wrong offset */ - } - - return 0; -} - -/* Read a block of data from the chip's buffer, via the - * BAP. Synchronization/serialization is the caller's problem. len - * must be even. - * - * Returns: - * < 0 on internal failure (errno) - * 0 on success - * > 0 on error from firmware - */ -static int hermes_bap_pread(struct hermes *hw, int bap, void *buf, int len, - u16 id, u16 offset) -{ - int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; - int err = 0; - - if ((len < 0) || (len % 2)) - return -EINVAL; - - err = hermes_bap_seek(hw, bap, id, offset); - if (err) - goto out; - - /* Actually do the transfer */ - hermes_read_words(hw, dreg, buf, len / 2); - - out: - return err; -} - -/* Write a block of data to the chip's buffer, via the - * BAP. Synchronization/serialization is the caller's problem. - * - * Returns: - * < 0 on internal failure (errno) - * 0 on success - * > 0 on error from firmware - */ -static int hermes_bap_pwrite(struct hermes *hw, int bap, const void *buf, - int len, u16 id, u16 offset) -{ - int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; - int err = 0; - - if (len < 0) - return -EINVAL; - - err = hermes_bap_seek(hw, bap, id, offset); - if (err) - goto out; - - /* Actually do the transfer */ - hermes_write_bytes(hw, dreg, buf, len); - - out: - return err; -} - -/* Read a Length-Type-Value record from the card. - * - * If length is NULL, we ignore the length read from the card, and - * read the entire buffer regardless. This is useful because some of - * the configuration records appear to have incorrect lengths in - * practice. - * - * Callable from user or bh context. */ -static int hermes_read_ltv(struct hermes *hw, int bap, u16 rid, - unsigned bufsize, u16 *length, void *buf) -{ - int err = 0; - int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; - u16 rlength, rtype; - unsigned nwords; - - if (bufsize % 2) - return -EINVAL; - - err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL); - if (err) - return err; - - err = hermes_bap_seek(hw, bap, rid, 0); - if (err) - return err; - - rlength = hermes_read_reg(hw, dreg); - - if (!rlength) - return -ENODATA; - - rtype = hermes_read_reg(hw, dreg); - - if (length) - *length = rlength; - - if (rtype != rid) - printk(KERN_WARNING "hermes @ %p: %s(): " - "rid (0x%04x) does not match type (0x%04x)\n", - hw->iobase, __func__, rid, rtype); - if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize) - printk(KERN_WARNING "hermes @ %p: " - "Truncating LTV record from %d to %d bytes. " - "(rid=0x%04x, len=0x%04x)\n", hw->iobase, - HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength); - - nwords = min((unsigned)rlength - 1, bufsize / 2); - hermes_read_words(hw, dreg, buf, nwords); - - return 0; -} - -static int hermes_write_ltv(struct hermes *hw, int bap, u16 rid, - u16 length, const void *value) -{ - int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; - int err = 0; - unsigned count; - - if (length == 0) - return -EINVAL; - - err = hermes_bap_seek(hw, bap, rid, 0); - if (err) - return err; - - hermes_write_reg(hw, dreg, length); - hermes_write_reg(hw, dreg, rid); - - count = length - 1; - - hermes_write_bytes(hw, dreg, value, count << 1); - - err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, - rid, NULL); - - return err; -} - -/*** Hermes AUX control ***/ - -static inline void -hermes_aux_setaddr(struct hermes *hw, u32 addr) -{ - hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); - hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); -} - -static inline int -hermes_aux_control(struct hermes *hw, int enabled) -{ - int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; - int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; - int i; - - /* Already open? */ - if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) - return 0; - - hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); - hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); - hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); - hermes_write_reg(hw, HERMES_CONTROL, action); - - for (i = 0; i < 20; i++) { - udelay(10); - if (hermes_read_reg(hw, HERMES_CONTROL) == - desired_state) - return 0; - } - - return -EBUSY; -} - -/*** Hermes programming ***/ - -/* About to start programming data (Hermes I) - * offset is the entry point - * - * Spectrum_cs' Symbol fw does not require this - * wl_lkm Agere fw does - * Don't know about intersil - */ -static int hermesi_program_init(struct hermes *hw, u32 offset) -{ - int err; - - /* Disable interrupts?*/ - /*hw->inten = 0x0;*/ - /*hermes_write_regn(hw, INTEN, 0);*/ - /*hermes_set_irqmask(hw, 0);*/ - - /* Acknowledge any outstanding command */ - hermes_write_regn(hw, EVACK, 0xFFFF); - - /* Using init_cmd_wait rather than cmd_wait */ - err = hw->ops->init_cmd_wait(hw, - 0x0100 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - if (err) - return err; - - err = hw->ops->init_cmd_wait(hw, - 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - if (err) - return err; - - err = hermes_aux_control(hw, 1); - pr_debug("AUX enable returned %d\n", err); - - if (err) - return err; - - pr_debug("Enabling volatile, EP 0x%08x\n", offset); - err = hw->ops->init_cmd_wait(hw, - HERMES_PROGRAM_ENABLE_VOLATILE, - offset & 0xFFFFu, - offset >> 16, - 0, - NULL); - pr_debug("PROGRAM_ENABLE returned %d\n", err); - - return err; -} - -/* Done programming data (Hermes I) - * - * Spectrum_cs' Symbol fw does not require this - * wl_lkm Agere fw does - * Don't know about intersil - */ -static int hermesi_program_end(struct hermes *hw) -{ - struct hermes_response resp; - int rc = 0; - int err; - - rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); - - pr_debug("PROGRAM_DISABLE returned %d, " - "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", - rc, resp.resp0, resp.resp1, resp.resp2); - - if ((rc == 0) && - ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) - rc = -EIO; - - err = hermes_aux_control(hw, 0); - pr_debug("AUX disable returned %d\n", err); - - /* Acknowledge any outstanding command */ - hermes_write_regn(hw, EVACK, 0xFFFF); - - /* Reinitialise, ignoring return */ - (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - - return rc ? rc : err; -} - -static int hermes_program_bytes(struct hermes *hw, const char *data, - u32 addr, u32 len) -{ - /* wl lkm splits the programming into chunks of 2000 bytes. - * This restriction appears to come from USB. The PCMCIA - * adapters can program the whole lot in one go */ - hermes_aux_setaddr(hw, addr); - hermes_write_bytes(hw, HERMES_AUXDATA, data, len); - return 0; -} - -/* Read PDA from the adapter */ -static int hermes_read_pda(struct hermes *hw, __le16 *pda, u32 pda_addr, - u16 pda_len) -{ - int ret; - u16 pda_size; - u16 data_len = pda_len; - __le16 *data = pda; - - if (hw->eeprom_pda) { - /* PDA of spectrum symbol is in eeprom */ - - /* Issue command to read EEPROM */ - ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); - if (ret) - return ret; - } else { - /* wl_lkm does not include PDA size in the PDA area. - * We will pad the information into pda, so other routines - * don't have to be modified */ - pda[0] = cpu_to_le16(pda_len - 2); - /* Includes CFG_PROD_DATA but not itself */ - pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ - data_len = pda_len - 4; - data = pda + 2; - } - - /* Open auxiliary port */ - ret = hermes_aux_control(hw, 1); - pr_debug("AUX enable returned %d\n", ret); - if (ret) - return ret; - - /* Read PDA */ - hermes_aux_setaddr(hw, pda_addr); - hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); - - /* Close aux port */ - ret = hermes_aux_control(hw, 0); - pr_debug("AUX disable returned %d\n", ret); - - /* Check PDA length */ - pda_size = le16_to_cpu(pda[0]); - pr_debug("Actual PDA length %d, Max allowed %d\n", - pda_size, pda_len); - if (pda_size > pda_len) - return -EINVAL; - - return 0; -} - -static void hermes_lock_irqsave(spinlock_t *lock, - unsigned long *flags) __acquires(lock) -{ - spin_lock_irqsave(lock, *flags); -} - -static void hermes_unlock_irqrestore(spinlock_t *lock, - unsigned long *flags) __releases(lock) -{ - spin_unlock_irqrestore(lock, *flags); -} - -static void hermes_lock_irq(spinlock_t *lock) __acquires(lock) -{ - spin_lock_irq(lock); -} - -static void hermes_unlock_irq(spinlock_t *lock) __releases(lock) -{ - spin_unlock_irq(lock); -} - -/* Hermes operations for local buses */ -static const struct hermes_ops hermes_ops_local = { - .init = hermes_init, - .cmd_wait = hermes_docmd_wait, - .init_cmd_wait = hermes_doicmd_wait, - .allocate = hermes_allocate, - .read_ltv = hermes_read_ltv, - .read_ltv_pr = hermes_read_ltv, - .write_ltv = hermes_write_ltv, - .bap_pread = hermes_bap_pread, - .bap_pwrite = hermes_bap_pwrite, - .read_pda = hermes_read_pda, - .program_init = hermesi_program_init, - .program_end = hermesi_program_end, - .program = hermes_program_bytes, - .lock_irqsave = hermes_lock_irqsave, - .unlock_irqrestore = hermes_unlock_irqrestore, - .lock_irq = hermes_lock_irq, - .unlock_irq = hermes_unlock_irq, -}; diff --git a/drivers/net/wireless/intersil/orinoco/hermes.h b/drivers/net/wireless/intersil/orinoco/hermes.h deleted file mode 100644 index 3dc561a5cb..0000000000 --- a/drivers/net/wireless/intersil/orinoco/hermes.h +++ /dev/null @@ -1,534 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* hermes.h - * - * Driver core for the "Hermes" wireless MAC controller, as used in - * the Lucent Orinoco and Cabletron RoamAbout cards. It should also - * work on the hfa3841 and hfa3842 MAC controller chips used in the - * Prism I & II chipsets. - * - * This is not a complete driver, just low-level access routines for - * the MAC controller itself. - * - * Based on the prism2 driver from Absolute Value Systems' linux-wlan - * project, the Linux wvlan_cs driver, Lucent's HCF-Light - * (wvlan_hcf.c) library, and the NetBSD wireless driver. - * - * Copyright (C) 2000, David Gibson, Linuxcare Australia. - * (C) Copyright David Gibson, IBM Corp. 2001-2003. - * - * Portions taken from hfa384x.h. - * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - */ - -#ifndef _HERMES_H -#define _HERMES_H - -/* Notes on locking: - * - * As a module of low level hardware access routines, there is no - * locking. Users of this module should ensure that they serialize - * access to the hermes structure, and to the hardware -*/ - -#include <linux/if_ether.h> -#include <linux/io.h> - -/* - * Limits and constants - */ -#define HERMES_ALLOC_LEN_MIN (4) -#define HERMES_ALLOC_LEN_MAX (2400) -#define HERMES_LTV_LEN_MAX (34) -#define HERMES_BAP_DATALEN_MAX (4096) -#define HERMES_BAP_OFFSET_MAX (4096) -#define HERMES_PORTID_MAX (7) -#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX + 1) -#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */ -#define HERMES_PDA_RECS_MAX (200) /* a guess */ -#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */ -#define HERMES_SCANRESULT_MAX (35) -#define HERMES_CHINFORESULT_MAX (8) -#define HERMES_MAX_MULTICAST (16) -#define HERMES_MAGIC (0x7d1f) - -/* - * Hermes register offsets - */ -#define HERMES_CMD (0x00) -#define HERMES_PARAM0 (0x02) -#define HERMES_PARAM1 (0x04) -#define HERMES_PARAM2 (0x06) -#define HERMES_STATUS (0x08) -#define HERMES_RESP0 (0x0A) -#define HERMES_RESP1 (0x0C) -#define HERMES_RESP2 (0x0E) -#define HERMES_INFOFID (0x10) -#define HERMES_RXFID (0x20) -#define HERMES_ALLOCFID (0x22) -#define HERMES_TXCOMPLFID (0x24) -#define HERMES_SELECT0 (0x18) -#define HERMES_OFFSET0 (0x1C) -#define HERMES_DATA0 (0x36) -#define HERMES_SELECT1 (0x1A) -#define HERMES_OFFSET1 (0x1E) -#define HERMES_DATA1 (0x38) -#define HERMES_EVSTAT (0x30) -#define HERMES_INTEN (0x32) -#define HERMES_EVACK (0x34) -#define HERMES_CONTROL (0x14) -#define HERMES_SWSUPPORT0 (0x28) -#define HERMES_SWSUPPORT1 (0x2A) -#define HERMES_SWSUPPORT2 (0x2C) -#define HERMES_AUXPAGE (0x3A) -#define HERMES_AUXOFFSET (0x3C) -#define HERMES_AUXDATA (0x3E) - -/* - * CMD register bitmasks - */ -#define HERMES_CMD_BUSY (0x8000) -#define HERMES_CMD_AINFO (0x7f00) -#define HERMES_CMD_MACPORT (0x0700) -#define HERMES_CMD_RECL (0x0100) -#define HERMES_CMD_WRITE (0x0100) -#define HERMES_CMD_PROGMODE (0x0300) -#define HERMES_CMD_CMDCODE (0x003f) - -/* - * STATUS register bitmasks - */ -#define HERMES_STATUS_RESULT (0x7f00) -#define HERMES_STATUS_CMDCODE (0x003f) - -/* - * OFFSET register bitmasks - */ -#define HERMES_OFFSET_BUSY (0x8000) -#define HERMES_OFFSET_ERR (0x4000) -#define HERMES_OFFSET_DATAOFF (0x0ffe) - -/* - * Event register bitmasks (INTEN, EVSTAT, EVACK) - */ -#define HERMES_EV_TICK (0x8000) -#define HERMES_EV_WTERR (0x4000) -#define HERMES_EV_INFDROP (0x2000) -#define HERMES_EV_INFO (0x0080) -#define HERMES_EV_DTIM (0x0020) -#define HERMES_EV_CMD (0x0010) -#define HERMES_EV_ALLOC (0x0008) -#define HERMES_EV_TXEXC (0x0004) -#define HERMES_EV_TX (0x0002) -#define HERMES_EV_RX (0x0001) - -/* - * Command codes - */ -/*--- Controller Commands ----------------------------*/ -#define HERMES_CMD_INIT (0x0000) -#define HERMES_CMD_ENABLE (0x0001) -#define HERMES_CMD_DISABLE (0x0002) -#define HERMES_CMD_DIAG (0x0003) - -/*--- Buffer Mgmt Commands ---------------------------*/ -#define HERMES_CMD_ALLOC (0x000A) -#define HERMES_CMD_TX (0x000B) - -/*--- Regulate Commands ------------------------------*/ -#define HERMES_CMD_NOTIFY (0x0010) -#define HERMES_CMD_INQUIRE (0x0011) - -/*--- Configure Commands -----------------------------*/ -#define HERMES_CMD_ACCESS (0x0021) -#define HERMES_CMD_DOWNLD (0x0022) - -/*--- Serial I/O Commands ----------------------------*/ -#define HERMES_CMD_READMIF (0x0030) -#define HERMES_CMD_WRITEMIF (0x0031) - -/*--- Debugging Commands -----------------------------*/ -#define HERMES_CMD_TEST (0x0038) - - -/* Test command arguments */ -#define HERMES_TEST_SET_CHANNEL 0x0800 -#define HERMES_TEST_MONITOR 0x0b00 -#define HERMES_TEST_STOP 0x0f00 - -/* Authentication algorithms */ -#define HERMES_AUTH_OPEN 1 -#define HERMES_AUTH_SHARED_KEY 2 - -/* WEP settings */ -#define HERMES_WEP_PRIVACY_INVOKED 0x0001 -#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002 -#define HERMES_WEP_HOST_ENCRYPT 0x0010 -#define HERMES_WEP_HOST_DECRYPT 0x0080 - -/* Symbol hostscan options */ -#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001 -#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002 -#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040 -#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080 - -/* - * Frame structures and constants - */ - -#define HERMES_DESCRIPTOR_OFFSET 0 -#define HERMES_802_11_OFFSET (14) -#define HERMES_802_3_OFFSET (14 + 32) -#define HERMES_802_2_OFFSET (14 + 32 + 14) -#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2) - -#define HERMES_RXSTAT_ERR (0x0003) -#define HERMES_RXSTAT_BADCRC (0x0001) -#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002) -#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */ -#define HERMES_RXSTAT_MACPORT (0x0700) -#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */ -#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */ -#define HERMES_RXSTAT_MSGTYPE (0xE000) -#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */ -#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */ -#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */ - -/* Shift amount for key ID in RXSTAT and TXCTRL */ -#define HERMES_MIC_KEY_ID_SHIFT 11 - -struct hermes_tx_descriptor { - __le16 status; - __le16 reserved1; - __le16 reserved2; - __le32 sw_support; - u8 retry_count; - u8 tx_rate; - __le16 tx_control; -} __packed; - -#define HERMES_TXSTAT_RETRYERR (0x0001) -#define HERMES_TXSTAT_AGEDERR (0x0002) -#define HERMES_TXSTAT_DISCON (0x0004) -#define HERMES_TXSTAT_FORMERR (0x0008) - -#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */ -#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */ -#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */ -#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */ -#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */ -#define HERMES_TXCTRL_ALT_RTRY (0x0020) - -/* Inquiry constants and data types */ - -#define HERMES_INQ_TALLIES (0xF100) -#define HERMES_INQ_SCAN (0xF101) -#define HERMES_INQ_CHANNELINFO (0xF102) -#define HERMES_INQ_HOSTSCAN (0xF103) -#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104) -#define HERMES_INQ_LINKSTATUS (0xF200) -#define HERMES_INQ_SEC_STAT_AGERE (0xF202) - -struct hermes_tallies_frame { - __le16 TxUnicastFrames; - __le16 TxMulticastFrames; - __le16 TxFragments; - __le16 TxUnicastOctets; - __le16 TxMulticastOctets; - __le16 TxDeferredTransmissions; - __le16 TxSingleRetryFrames; - __le16 TxMultipleRetryFrames; - __le16 TxRetryLimitExceeded; - __le16 TxDiscards; - __le16 RxUnicastFrames; - __le16 RxMulticastFrames; - __le16 RxFragments; - __le16 RxUnicastOctets; - __le16 RxMulticastOctets; - __le16 RxFCSErrors; - __le16 RxDiscards_NoBuffer; - __le16 TxDiscardsWrongSA; - __le16 RxWEPUndecryptable; - __le16 RxMsgInMsgFragments; - __le16 RxMsgInBadMsgFragments; - /* Those last are probably not available in very old firmwares */ - __le16 RxDiscards_WEPICVError; - __le16 RxDiscards_WEPExcluded; -} __packed; - -/* Grabbed from wlan-ng - Thanks Mark... - Jean II - * This is the result of a scan inquiry command */ -/* Structure describing info about an Access Point */ -struct prism2_scan_apinfo { - __le16 channel; /* Channel where the AP sits */ - __le16 noise; /* Noise level */ - __le16 level; /* Signal level */ - u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - __le16 beacon_interv; /* Beacon interval */ - __le16 capabilities; /* Capabilities */ - __le16 essid_len; /* ESSID length */ - u8 essid[32]; /* ESSID of the network */ - u8 rates[10]; /* Bit rate supported */ - __le16 proberesp_rate; /* Data rate of the response frame */ - __le16 atim; /* ATIM window time, Kus (hostscan only) */ -} __packed; - -/* Same stuff for the Lucent/Agere card. - * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */ -struct agere_scan_apinfo { - __le16 channel; /* Channel where the AP sits */ - __le16 noise; /* Noise level */ - __le16 level; /* Signal level */ - u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - __le16 beacon_interv; /* Beacon interval */ - __le16 capabilities; /* Capabilities */ - /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ - __le16 essid_len; /* ESSID length */ - u8 essid[32]; /* ESSID of the network */ -} __packed; - -/* Moustafa: Scan structure for Symbol cards */ -struct symbol_scan_apinfo { - u8 channel; /* Channel where the AP sits */ - u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */ - __le16 noise; /* Noise level */ - __le16 level; /* Signal level */ - u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - __le16 beacon_interv; /* Beacon interval */ - __le16 capabilities; /* Capabilities */ - /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ - __le16 essid_len; /* ESSID length */ - u8 essid[32]; /* ESSID of the network */ - __le16 rates[5]; /* Bit rate supported */ - __le16 basic_rates; /* Basic rates bitmask */ - u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */ - u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */ -} __packed; - -union hermes_scan_info { - struct agere_scan_apinfo a; - struct prism2_scan_apinfo p; - struct symbol_scan_apinfo s; -}; - -/* Extended scan struct for HERMES_INQ_CHANNELINFO. - * wl_lkm calls this an ACS scan (Automatic Channel Select). - * Keep out of union hermes_scan_info because it is much bigger than - * the older scan structures. */ -struct agere_ext_scan_info { - __le16 reserved0; - - u8 noise; - u8 level; - u8 rx_flow; - u8 rate; - __le16 reserved1[2]; - - __le16 frame_control; - __le16 dur_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 bssid[ETH_ALEN]; - __le16 sequence; - u8 addr4[ETH_ALEN]; - - __le16 data_length; - - /* Next 3 fields do not get filled in. */ - u8 daddr[ETH_ALEN]; - u8 saddr[ETH_ALEN]; - __le16 len_type; - - __le64 timestamp; - __le16 beacon_interval; - __le16 capabilities; - u8 data[]; -} __packed; - -#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) -#define HERMES_LINKSTATUS_CONNECTED (0x0001) -#define HERMES_LINKSTATUS_DISCONNECTED (0x0002) -#define HERMES_LINKSTATUS_AP_CHANGE (0x0003) -#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004) -#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005) -#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006) - -struct hermes_linkstatus { - __le16 linkstatus; /* Link status */ -} __packed; - -struct hermes_response { - u16 status, resp0, resp1, resp2; -}; - -/* "ID" structure - used for ESSID and station nickname */ -struct hermes_idstring { - __le16 len; - __le16 val[16]; -} __packed; - -struct hermes_multicast { - u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN]; -} __packed; - -/* Timeouts */ -#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */ - -struct hermes; - -/* Functions to access hardware */ -struct hermes_ops { - int (*init)(struct hermes *hw); - int (*cmd_wait)(struct hermes *hw, u16 cmd, u16 parm0, - struct hermes_response *resp); - int (*init_cmd_wait)(struct hermes *hw, u16 cmd, - u16 parm0, u16 parm1, u16 parm2, - struct hermes_response *resp); - int (*allocate)(struct hermes *hw, u16 size, u16 *fid); - int (*read_ltv)(struct hermes *hw, int bap, u16 rid, unsigned buflen, - u16 *length, void *buf); - int (*read_ltv_pr)(struct hermes *hw, int bap, u16 rid, - unsigned buflen, u16 *length, void *buf); - int (*write_ltv)(struct hermes *hw, int bap, u16 rid, - u16 length, const void *value); - int (*bap_pread)(struct hermes *hw, int bap, void *buf, int len, - u16 id, u16 offset); - int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf, - int len, u16 id, u16 offset); - int (*read_pda)(struct hermes *hw, __le16 *pda, - u32 pda_addr, u16 pda_len); - int (*program_init)(struct hermes *hw, u32 entry_point); - int (*program_end)(struct hermes *hw); - int (*program)(struct hermes *hw, const char *buf, - u32 addr, u32 len); - void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags); - void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags); - void (*lock_irq)(spinlock_t *lock); - void (*unlock_irq)(spinlock_t *lock); -}; - -/* Basic control structure */ -struct hermes { - void __iomem *iobase; - int reg_spacing; -#define HERMES_16BIT_REGSPACING 0 -#define HERMES_32BIT_REGSPACING 1 - u16 inten; /* Which interrupts should be enabled? */ - bool eeprom_pda; - const struct hermes_ops *ops; - void *priv; -}; - -/* Register access convenience macros */ -#define hermes_read_reg(hw, off) \ - (ioread16((hw)->iobase + ((off) << (hw)->reg_spacing))) -#define hermes_write_reg(hw, off, val) \ - (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing))) -#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name) -#define hermes_write_regn(hw, name, val) \ - hermes_write_reg((hw), HERMES_##name, (val)) - -/* Function prototypes */ -void hermes_struct_init(struct hermes *hw, void __iomem *address, - int reg_spacing); - -/* Inline functions */ - -static inline int hermes_present(struct hermes *hw) -{ - return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC; -} - -static inline void hermes_set_irqmask(struct hermes *hw, u16 events) -{ - hw->inten = events; - hermes_write_regn(hw, INTEN, events); -} - -static inline int hermes_enable_port(struct hermes *hw, int port) -{ - return hw->ops->cmd_wait(hw, HERMES_CMD_ENABLE | (port << 8), - 0, NULL); -} - -static inline int hermes_disable_port(struct hermes *hw, int port) -{ - return hw->ops->cmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), - 0, NULL); -} - -/* Initiate an INQUIRE command (tallies or scan). The result will come as an - * information frame in __orinoco_ev_info() */ -static inline int hermes_inquire(struct hermes *hw, u16 rid) -{ - return hw->ops->cmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); -} - -#define HERMES_BYTES_TO_RECLEN(n) ((((n) + 1) / 2) + 1) -#define HERMES_RECLEN_TO_BYTES(n) (((n) - 1) * 2) - -/* Note that for the next two, the count is in 16-bit words, not bytes */ -static inline void hermes_read_words(struct hermes *hw, int off, - void *buf, unsigned count) -{ - off = off << hw->reg_spacing; - ioread16_rep(hw->iobase + off, buf, count); -} - -static inline void hermes_write_bytes(struct hermes *hw, int off, - const char *buf, unsigned count) -{ - off = off << hw->reg_spacing; - iowrite16_rep(hw->iobase + off, buf, count >> 1); - if (unlikely(count & 1)) - iowrite8(buf[count - 1], hw->iobase + off); -} - -static inline void hermes_clear_words(struct hermes *hw, int off, - unsigned count) -{ - unsigned i; - - off = off << hw->reg_spacing; - - for (i = 0; i < count; i++) - iowrite16(0, hw->iobase + off); -} - -#define HERMES_READ_RECORD(hw, bap, rid, buf) \ - (hw->ops->read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf))) -#define HERMES_READ_RECORD_PR(hw, bap, rid, buf) \ - (hw->ops->read_ltv_pr((hw), (bap), (rid), sizeof(*buf), NULL, (buf))) -#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \ - (hw->ops->write_ltv((hw), (bap), (rid), \ - HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf))) - -static inline int hermes_read_wordrec(struct hermes *hw, int bap, u16 rid, - u16 *word) -{ - __le16 rec; - int err; - - err = HERMES_READ_RECORD(hw, bap, rid, &rec); - *word = le16_to_cpu(rec); - return err; -} - -static inline int hermes_read_wordrec_pr(struct hermes *hw, int bap, u16 rid, - u16 *word) -{ - __le16 rec; - int err; - - err = HERMES_READ_RECORD_PR(hw, bap, rid, &rec); - *word = le16_to_cpu(rec); - return err; -} - -static inline int hermes_write_wordrec(struct hermes *hw, int bap, u16 rid, - u16 word) -{ - __le16 rec = cpu_to_le16(word); - return HERMES_WRITE_RECORD(hw, bap, rid, &rec); -} - -#endif /* _HERMES_H */ diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.c b/drivers/net/wireless/intersil/orinoco/hermes_dld.c deleted file mode 100644 index dbeadfcfef..0000000000 --- a/drivers/net/wireless/intersil/orinoco/hermes_dld.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Hermes download helper. - * - * This helper: - * - is capable of writing to the volatile area of the hermes device - * - is currently not capable of writing to non-volatile areas - * - provide helpers to identify and update plugin data - * - is not capable of interpreting a fw image directly. That is up to - * the main card driver. - * - deals with Hermes I devices. It can probably be modified to deal - * with Hermes II devices - * - * Copyright (C) 2007, David Kilroy - * - * Plug data code slightly modified from spectrum_cs driver - * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org> - * Portions based on information in wl_lkm_718 Agere driver - * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include "hermes.h" -#include "hermes_dld.h" - -#define PFX "hermes_dld: " - -/* End markers used in dblocks */ -#define PDI_END 0x00000000 /* End of PDA */ -#define BLOCK_END 0xFFFFFFFF /* Last image block */ -#define TEXT_END 0x1A /* End of text header */ - -/* - * The following structures have little-endian fields denoted by - * the leading underscore. Don't access them directly - use inline - * functions defined below. - */ - -/* - * The binary image to be downloaded consists of series of data blocks. - * Each block has the following structure. - */ -struct dblock { - __le32 addr; /* adapter address where to write the block */ - __le16 len; /* length of the data only, in bytes */ - char data[]; /* data to be written */ -} __packed; - -/* - * Plug Data References are located in the image after the last data - * block. They refer to areas in the adapter memory where the plug data - * items with matching ID should be written. - */ -struct pdr { - __le32 id; /* record ID */ - __le32 addr; /* adapter address where to write the data */ - __le32 len; /* expected length of the data, in bytes */ - char next[]; /* next PDR starts here */ -} __packed; - -/* - * Plug Data Items are located in the EEPROM read from the adapter by - * primary firmware. They refer to the device-specific data that should - * be plugged into the secondary firmware. - */ -struct pdi { - __le16 len; /* length of ID and data, in words */ - __le16 id; /* record ID */ - char data[]; /* plug data */ -} __packed; - -/*** FW data block access functions ***/ - -static inline u32 -dblock_addr(const struct dblock *blk) -{ - return le32_to_cpu(blk->addr); -} - -static inline u32 -dblock_len(const struct dblock *blk) -{ - return le16_to_cpu(blk->len); -} - -/*** PDR Access functions ***/ - -static inline u32 -pdr_id(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->id); -} - -static inline u32 -pdr_addr(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->addr); -} - -static inline u32 -pdr_len(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->len); -} - -/*** PDI Access functions ***/ - -static inline u32 -pdi_id(const struct pdi *pdi) -{ - return le16_to_cpu(pdi->id); -} - -/* Return length of the data only, in bytes */ -static inline u32 -pdi_len(const struct pdi *pdi) -{ - return 2 * (le16_to_cpu(pdi->len) - 1); -} - -/*** Plug Data Functions ***/ - -/* - * Scan PDR for the record with the specified RECORD_ID. - * If it's not found, return NULL. - */ -static const struct pdr * -hermes_find_pdr(const struct pdr *first_pdr, u32 record_id, const void *end) -{ - const struct pdr *pdr = first_pdr; - - end -= sizeof(struct pdr); - - while (((void *) pdr <= end) && - (pdr_id(pdr) != PDI_END)) { - /* - * PDR area is currently not terminated by PDI_END. - * It's followed by CRC records, which have the type - * field where PDR has length. The type can be 0 or 1. - */ - if (pdr_len(pdr) < 2) - return NULL; - - /* If the record ID matches, we are done */ - if (pdr_id(pdr) == record_id) - return pdr; - - pdr = (struct pdr *) pdr->next; - } - return NULL; -} - -/* Scan production data items for a particular entry */ -static const struct pdi * -hermes_find_pdi(const struct pdi *first_pdi, u32 record_id, const void *end) -{ - const struct pdi *pdi = first_pdi; - - end -= sizeof(struct pdi); - - while (((void *) pdi <= end) && - (pdi_id(pdi) != PDI_END)) { - - /* If the record ID matches, we are done */ - if (pdi_id(pdi) == record_id) - return pdi; - - pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; - } - return NULL; -} - -/* Process one Plug Data Item - find corresponding PDR and plug it */ -static int -hermes_plug_pdi(struct hermes *hw, const struct pdr *first_pdr, - const struct pdi *pdi, const void *pdr_end) -{ - const struct pdr *pdr; - - /* Find the PDR corresponding to this PDI */ - pdr = hermes_find_pdr(first_pdr, pdi_id(pdi), pdr_end); - - /* No match is found, safe to ignore */ - if (!pdr) - return 0; - - /* Lengths of the data in PDI and PDR must match */ - if (pdi_len(pdi) != pdr_len(pdr)) - return -EINVAL; - - /* do the actual plugging */ - hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi)); - - return 0; -} - -/* Parse PDA and write the records into the adapter - * - * Attempt to write every records that is in the specified pda - * which also has a valid production data record for the firmware. - */ -int hermes_apply_pda(struct hermes *hw, - const char *first_pdr, - const void *pdr_end, - const __le16 *pda, - const void *pda_end) -{ - int ret; - const struct pdi *pdi; - const struct pdr *pdr; - - pdr = (const struct pdr *) first_pdr; - pda_end -= sizeof(struct pdi); - - /* Go through every PDI and plug them into the adapter */ - pdi = (const struct pdi *) (pda + 2); - while (((void *) pdi <= pda_end) && - (pdi_id(pdi) != PDI_END)) { - ret = hermes_plug_pdi(hw, pdr, pdi, pdr_end); - if (ret) - return ret; - - /* Increment to the next PDI */ - pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)]; - } - return 0; -} - -/* Identify the total number of bytes in all blocks - * including the header data. - */ -size_t -hermes_blocks_length(const char *first_block, const void *end) -{ - const struct dblock *blk = (const struct dblock *) first_block; - int total_len = 0; - int len; - - end -= sizeof(*blk); - - /* Skip all blocks to locate Plug Data References - * (Spectrum CS) */ - while (((void *) blk <= end) && - (dblock_addr(blk) != BLOCK_END)) { - len = dblock_len(blk); - total_len += sizeof(*blk) + len; - blk = (struct dblock *) &blk->data[len]; - } - - return total_len; -} - -/*** Hermes programming ***/ - -/* Program the data blocks */ -int hermes_program(struct hermes *hw, const char *first_block, const void *end) -{ - const struct dblock *blk; - u32 blkaddr; - u32 blklen; - int err = 0; - - blk = (const struct dblock *) first_block; - - if ((void *) blk > (end - sizeof(*blk))) - return -EIO; - - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - - while ((blkaddr != BLOCK_END) && - (((void *) blk + blklen) <= end)) { - pr_debug(PFX "Programming block of length %d " - "to address 0x%08x\n", blklen, blkaddr); - - err = hw->ops->program(hw, blk->data, blkaddr, blklen); - if (err) - break; - - blk = (const struct dblock *) &blk->data[blklen]; - - if ((void *) blk > (end - sizeof(*blk))) - return -EIO; - - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - } - return err; -} - -/*** Default plugging data for Hermes I ***/ -/* Values from wl_lkm_718/hcf/dhf.c */ - -#define DEFINE_DEFAULT_PDR(pid, length, data) \ -static const struct { \ - __le16 len; \ - __le16 id; \ - u8 val[length]; \ -} __packed default_pdr_data_##pid = { \ - cpu_to_le16((sizeof(default_pdr_data_##pid)/ \ - sizeof(__le16)) - 1), \ - cpu_to_le16(pid), \ - data \ -} - -#define DEFAULT_PDR(pid) default_pdr_data_##pid - -/* HWIF Compatibility */ -DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00"); - -/* PPPPSign */ -DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00"); - -/* PPPPProf */ -DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00"); - -/* Antenna diversity */ -DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F"); - -/* Modem VCO band Set-up */ -DEFINE_DEFAULT_PDR(0x0160, 28, - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00"); - -/* Modem Rx Gain Table Values */ -DEFINE_DEFAULT_PDR(0x0161, 256, - "\x3F\x01\x3F\01\x3F\x01\x3F\x01" - "\x3F\x01\x3F\01\x3F\x01\x3F\x01" - "\x3F\x01\x3F\01\x3F\x01\x3F\x01" - "\x3F\x01\x3F\01\x3F\x01\x3F\x01" - "\x3F\x01\x3E\01\x3E\x01\x3D\x01" - "\x3D\x01\x3C\01\x3C\x01\x3B\x01" - "\x3B\x01\x3A\01\x3A\x01\x39\x01" - "\x39\x01\x38\01\x38\x01\x37\x01" - "\x37\x01\x36\01\x36\x01\x35\x01" - "\x35\x01\x34\01\x34\x01\x33\x01" - "\x33\x01\x32\x01\x32\x01\x31\x01" - "\x31\x01\x30\x01\x30\x01\x7B\x01" - "\x7B\x01\x7A\x01\x7A\x01\x79\x01" - "\x79\x01\x78\x01\x78\x01\x77\x01" - "\x77\x01\x76\x01\x76\x01\x75\x01" - "\x75\x01\x74\x01\x74\x01\x73\x01" - "\x73\x01\x72\x01\x72\x01\x71\x01" - "\x71\x01\x70\x01\x70\x01\x68\x01" - "\x68\x01\x67\x01\x67\x01\x66\x01" - "\x66\x01\x65\x01\x65\x01\x57\x01" - "\x57\x01\x56\x01\x56\x01\x55\x01" - "\x55\x01\x54\x01\x54\x01\x53\x01" - "\x53\x01\x52\x01\x52\x01\x51\x01" - "\x51\x01\x50\x01\x50\x01\x48\x01" - "\x48\x01\x47\x01\x47\x01\x46\x01" - "\x46\x01\x45\x01\x45\x01\x44\x01" - "\x44\x01\x43\x01\x43\x01\x42\x01" - "\x42\x01\x41\x01\x41\x01\x40\x01" - "\x40\x01\x40\x01\x40\x01\x40\x01" - "\x40\x01\x40\x01\x40\x01\x40\x01" - "\x40\x01\x40\x01\x40\x01\x40\x01" - "\x40\x01\x40\x01\x40\x01\x40\x01"); - -/* Write PDA according to certain rules. - * - * For every production data record, look for a previous setting in - * the pda, and use that. - * - * For certain records, use defaults if they are not found in pda. - */ -int hermes_apply_pda_with_defaults(struct hermes *hw, - const char *first_pdr, - const void *pdr_end, - const __le16 *pda, - const void *pda_end) -{ - const struct pdr *pdr = (const struct pdr *) first_pdr; - const struct pdi *first_pdi = (const struct pdi *) &pda[2]; - const struct pdi *pdi; - const struct pdi *default_pdi = NULL; - const struct pdi *outdoor_pdi; - int record_id; - - pdr_end -= sizeof(struct pdr); - - while (((void *) pdr <= pdr_end) && - (pdr_id(pdr) != PDI_END)) { - /* - * For spectrum_cs firmwares, - * PDR area is currently not terminated by PDI_END. - * It's followed by CRC records, which have the type - * field where PDR has length. The type can be 0 or 1. - */ - if (pdr_len(pdr) < 2) - break; - record_id = pdr_id(pdr); - - pdi = hermes_find_pdi(first_pdi, record_id, pda_end); - if (pdi) - pr_debug(PFX "Found record 0x%04x at %p\n", - record_id, pdi); - - switch (record_id) { - case 0x110: /* Modem REFDAC values */ - case 0x120: /* Modem VGDAC values */ - outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1, - pda_end); - default_pdi = NULL; - if (outdoor_pdi) { - pdi = outdoor_pdi; - pr_debug(PFX - "Using outdoor record 0x%04x at %p\n", - record_id + 1, pdi); - } - break; - case 0x5: /* HWIF Compatibility */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005); - break; - case 0x108: /* PPPPSign */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108); - break; - case 0x109: /* PPPPProf */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109); - break; - case 0x150: /* Antenna diversity */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150); - break; - case 0x160: /* Modem VCO band Set-up */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160); - break; - case 0x161: /* Modem Rx Gain Table Values */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161); - break; - default: - default_pdi = NULL; - break; - } - if (!pdi && default_pdi) { - /* Use default */ - pdi = default_pdi; - pr_debug(PFX "Using default record 0x%04x at %p\n", - record_id, pdi); - } - - if (pdi) { - /* Lengths of the data in PDI and PDR must match */ - if ((pdi_len(pdi) == pdr_len(pdr)) && - ((void *) pdi->data + pdi_len(pdi) < pda_end)) { - /* do the actual plugging */ - hw->ops->program(hw, pdi->data, pdr_addr(pdr), - pdi_len(pdi)); - } - } - - pdr++; - } - return 0; -} diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.h b/drivers/net/wireless/intersil/orinoco/hermes_dld.h deleted file mode 100644 index b5377e232c..0000000000 --- a/drivers/net/wireless/intersil/orinoco/hermes_dld.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2007, David Kilroy - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ -#ifndef _HERMES_DLD_H -#define _HERMES_DLD_H - -#include "hermes.h" - -int hermesi_program_init(struct hermes *hw, u32 offset); -int hermesi_program_end(struct hermes *hw); -int hermes_program(struct hermes *hw, const char *first_block, const void *end); - -int hermes_read_pda(struct hermes *hw, - __le16 *pda, - u32 pda_addr, - u16 pda_len, - int use_eeprom); -int hermes_apply_pda(struct hermes *hw, - const char *first_pdr, - const void *pdr_end, - const __le16 *pda, - const void *pda_end); -int hermes_apply_pda_with_defaults(struct hermes *hw, - const char *first_pdr, - const void *pdr_end, - const __le16 *pda, - const void *pda_end); - -size_t hermes_blocks_length(const char *first_block, const void *end); - -#endif /* _HERMES_DLD_H */ diff --git a/drivers/net/wireless/intersil/orinoco/hermes_rid.h b/drivers/net/wireless/intersil/orinoco/hermes_rid.h deleted file mode 100644 index 42eb67dea1..0000000000 --- a/drivers/net/wireless/intersil/orinoco/hermes_rid.h +++ /dev/null @@ -1,165 +0,0 @@ -#ifndef _HERMES_RID_H -#define _HERMES_RID_H - -/* - * Configuration RIDs - */ -#define HERMES_RID_CNFPORTTYPE 0xFC00 -#define HERMES_RID_CNFOWNMACADDR 0xFC01 -#define HERMES_RID_CNFDESIREDSSID 0xFC02 -#define HERMES_RID_CNFOWNCHANNEL 0xFC03 -#define HERMES_RID_CNFOWNSSID 0xFC04 -#define HERMES_RID_CNFOWNATIMWINDOW 0xFC05 -#define HERMES_RID_CNFSYSTEMSCALE 0xFC06 -#define HERMES_RID_CNFMAXDATALEN 0xFC07 -#define HERMES_RID_CNFWDSADDRESS 0xFC08 -#define HERMES_RID_CNFPMENABLED 0xFC09 -#define HERMES_RID_CNFPMEPS 0xFC0A -#define HERMES_RID_CNFMULTICASTRECEIVE 0xFC0B -#define HERMES_RID_CNFMAXSLEEPDURATION 0xFC0C -#define HERMES_RID_CNFPMHOLDOVERDURATION 0xFC0D -#define HERMES_RID_CNFOWNNAME 0xFC0E -#define HERMES_RID_CNFOWNDTIMPERIOD 0xFC10 -#define HERMES_RID_CNFWDSADDRESS1 0xFC11 -#define HERMES_RID_CNFWDSADDRESS2 0xFC12 -#define HERMES_RID_CNFWDSADDRESS3 0xFC13 -#define HERMES_RID_CNFWDSADDRESS4 0xFC14 -#define HERMES_RID_CNFWDSADDRESS5 0xFC15 -#define HERMES_RID_CNFWDSADDRESS6 0xFC16 -#define HERMES_RID_CNFMULTICASTPMBUFFERING 0xFC17 -#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20 -#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21 -#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21 -#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22 -#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23 -#define HERMES_RID_CNFDEFAULTKEY0 0xFC24 -#define HERMES_RID_CNFDEFAULTKEY1 0xFC25 -#define HERMES_RID_CNFMWOROBUST_AGERE 0xFC25 -#define HERMES_RID_CNFDEFAULTKEY2 0xFC26 -#define HERMES_RID_CNFDEFAULTKEY3 0xFC27 -#define HERMES_RID_CNFWEPFLAGS_INTERSIL 0xFC28 -#define HERMES_RID_CNFWEPKEYMAPPINGTABLE 0xFC29 -#define HERMES_RID_CNFAUTHENTICATION 0xFC2A -#define HERMES_RID_CNFMAXASSOCSTA 0xFC2B -#define HERMES_RID_CNFKEYLENGTH_SYMBOL 0xFC2B -#define HERMES_RID_CNFTXCONTROL 0xFC2C -#define HERMES_RID_CNFROAMINGMODE 0xFC2D -#define HERMES_RID_CNFHOSTAUTHENTICATION 0xFC2E -#define HERMES_RID_CNFRCVCRCERROR 0xFC30 -#define HERMES_RID_CNFMMLIFE 0xFC31 -#define HERMES_RID_CNFALTRETRYCOUNT 0xFC32 -#define HERMES_RID_CNFBEACONINT 0xFC33 -#define HERMES_RID_CNFAPPCFINFO 0xFC34 -#define HERMES_RID_CNFSTAPCFINFO 0xFC35 -#define HERMES_RID_CNFPRIORITYQUSAGE 0xFC37 -#define HERMES_RID_CNFTIMCTRL 0xFC40 -#define HERMES_RID_CNFTHIRTY2TALLY 0xFC42 -#define HERMES_RID_CNFENHSECURITY 0xFC43 -#define HERMES_RID_CNFGROUPADDRESSES 0xFC80 -#define HERMES_RID_CNFCREATEIBSS 0xFC81 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD 0xFC82 -#define HERMES_RID_CNFRTSTHRESHOLD 0xFC83 -#define HERMES_RID_CNFTXRATECONTROL 0xFC84 -#define HERMES_RID_CNFPROMISCUOUSMODE 0xFC85 -#define HERMES_RID_CNFBASICRATES_SYMBOL 0xFC8A -#define HERMES_RID_CNFPREAMBLE_SYMBOL 0xFC8C -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0 0xFC90 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1 0xFC91 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2 0xFC92 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3 0xFC93 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4 0xFC94 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5 0xFC95 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6 0xFC96 -#define HERMES_RID_CNFRTSTHRESHOLD0 0xFC97 -#define HERMES_RID_CNFRTSTHRESHOLD1 0xFC98 -#define HERMES_RID_CNFRTSTHRESHOLD2 0xFC99 -#define HERMES_RID_CNFRTSTHRESHOLD3 0xFC9A -#define HERMES_RID_CNFRTSTHRESHOLD4 0xFC9B -#define HERMES_RID_CNFRTSTHRESHOLD5 0xFC9C -#define HERMES_RID_CNFRTSTHRESHOLD6 0xFC9D -#define HERMES_RID_CNFHOSTSCAN_SYMBOL 0xFCAB -#define HERMES_RID_CNFSHORTPREAMBLE 0xFCB0 -#define HERMES_RID_CNFWEPKEYS_AGERE 0xFCB0 -#define HERMES_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1 -#define HERMES_RID_CNFTXKEY_AGERE 0xFCB1 -#define HERMES_RID_CNFAUTHENTICATIONRSPTO 0xFCB2 -#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2 -#define HERMES_RID_CNFBASICRATES 0xFCB3 -#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4 -#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4 -#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5 -#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6 -#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7 -#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8 -#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9 -#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA -#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB -#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2 -#define HERMES_RID_CNFDISASSOCIATE 0xFCC8 -#define HERMES_RID_CNFTICKTIME 0xFCE0 -#define HERMES_RID_CNFSCANREQUEST 0xFCE1 -#define HERMES_RID_CNFJOINREQUEST 0xFCE2 -#define HERMES_RID_CNFAUTHENTICATESTATION 0xFCE3 -#define HERMES_RID_CNFCHANNELINFOREQUEST 0xFCE4 -#define HERMES_RID_CNFHOSTSCAN 0xFCE5 - -/* - * Information RIDs - */ -#define HERMES_RID_MAXLOADTIME 0xFD00 -#define HERMES_RID_DOWNLOADBUFFER 0xFD01 -#define HERMES_RID_PRIID 0xFD02 -#define HERMES_RID_PRISUPRANGE 0xFD03 -#define HERMES_RID_CFIACTRANGES 0xFD04 -#define HERMES_RID_NICSERNUM 0xFD0A -#define HERMES_RID_NICID 0xFD0B -#define HERMES_RID_MFISUPRANGE 0xFD0C -#define HERMES_RID_CFISUPRANGE 0xFD0D -#define HERMES_RID_CHANNELLIST 0xFD10 -#define HERMES_RID_REGULATORYDOMAINS 0xFD11 -#define HERMES_RID_TEMPTYPE 0xFD12 -#define HERMES_RID_CIS 0xFD13 -#define HERMES_RID_STAID 0xFD20 -#define HERMES_RID_STASUPRANGE 0xFD21 -#define HERMES_RID_MFIACTRANGES 0xFD22 -#define HERMES_RID_CFIACTRANGES2 0xFD23 -#define HERMES_RID_SECONDARYVERSION_SYMBOL 0xFD24 -#define HERMES_RID_PORTSTATUS 0xFD40 -#define HERMES_RID_CURRENTSSID 0xFD41 -#define HERMES_RID_CURRENTBSSID 0xFD42 -#define HERMES_RID_COMMSQUALITY 0xFD43 -#define HERMES_RID_CURRENTTXRATE 0xFD44 -#define HERMES_RID_CURRENTBEACONINTERVAL 0xFD45 -#define HERMES_RID_CURRENTSCALETHRESHOLDS 0xFD46 -#define HERMES_RID_PROTOCOLRSPTIME 0xFD47 -#define HERMES_RID_SHORTRETRYLIMIT 0xFD48 -#define HERMES_RID_LONGRETRYLIMIT 0xFD49 -#define HERMES_RID_MAXTRANSMITLIFETIME 0xFD4A -#define HERMES_RID_MAXRECEIVELIFETIME 0xFD4B -#define HERMES_RID_CFPOLLABLE 0xFD4C -#define HERMES_RID_AUTHENTICATIONALGORITHMS 0xFD4D -#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F -#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL 0xFD51 -#define HERMES_RID_CURRENTTXRATE1 0xFD80 -#define HERMES_RID_CURRENTTXRATE2 0xFD81 -#define HERMES_RID_CURRENTTXRATE3 0xFD82 -#define HERMES_RID_CURRENTTXRATE4 0xFD83 -#define HERMES_RID_CURRENTTXRATE5 0xFD84 -#define HERMES_RID_CURRENTTXRATE6 0xFD85 -#define HERMES_RID_OWNMACADDR 0xFD86 -#define HERMES_RID_SCANRESULTSTABLE 0xFD88 -#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89 -#define HERMES_RID_CURRENT_WPA_IE 0xFD8A -#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B -#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C -#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D -#define HERMES_RID_TXQUEUEEMPTY 0xFD91 -#define HERMES_RID_PHYTYPE 0xFDC0 -#define HERMES_RID_CURRENTCHANNEL 0xFDC1 -#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2 -#define HERMES_RID_CCAMODE 0xFDC3 -#define HERMES_RID_SUPPORTEDDATARATES 0xFDC6 -#define HERMES_RID_BUILDSEQ 0xFFFE -#define HERMES_RID_FWID 0xFFFF - -#endif diff --git a/drivers/net/wireless/intersil/orinoco/hw.c b/drivers/net/wireless/intersil/orinoco/hw.c deleted file mode 100644 index 4fcca08e50..0000000000 --- a/drivers/net/wireless/intersil/orinoco/hw.c +++ /dev/null @@ -1,1362 +0,0 @@ -/* Encapsulate basic setting changes and retrieval on Hermes hardware - * - * See copyright notice in main.c - */ -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/if_arp.h> -#include <linux/ieee80211.h> -#include <linux/wireless.h> -#include <net/cfg80211.h> -#include "hermes.h" -#include "hermes_rid.h" -#include "orinoco.h" - -#include "hw.h" - -#define SYMBOL_MAX_VER_LEN (14) - -/* Symbol firmware has a bug allocating buffers larger than this */ -#define TX_NICBUF_SIZE_BUG 1585 - -/********************************************************************/ -/* Data tables */ -/********************************************************************/ - -/* This tables gives the actual meanings of the bitrate IDs returned - * by the firmware. */ -static const struct { - int bitrate; /* in 100s of kilobits */ - int automatic; - u16 agere_txratectrl; - u16 intersil_txratectrl; -} bitrate_table[] = { - {110, 1, 3, 15}, /* Entry 0 is the default */ - {10, 0, 1, 1}, - {10, 1, 1, 1}, - {20, 0, 2, 2}, - {20, 1, 6, 3}, - {55, 0, 4, 4}, - {55, 1, 7, 7}, - {110, 0, 5, 8}, -}; -#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) - -/* Firmware version encoding */ -struct comp_id { - u16 id, variant, major, minor; -} __packed; - -static inline enum fwtype determine_firmware_type(struct comp_id *nic_id) -{ - if (nic_id->id < 0x8000) - return FIRMWARE_TYPE_AGERE; - else if (nic_id->id == 0x8000 && nic_id->major == 0) - return FIRMWARE_TYPE_SYMBOL; - else - return FIRMWARE_TYPE_INTERSIL; -} - -/* Set priv->firmware type, determine firmware properties - * This function can be called before we have registerred with netdev, - * so all errors go out with dev_* rather than printk - * - * If non-NULL stores a firmware description in fw_name. - * If non-NULL stores a HW version in hw_ver - * - * These are output via generic cfg80211 ethtool support. - */ -int determine_fw_capabilities(struct orinoco_private *priv, - char *fw_name, size_t fw_name_len, - u32 *hw_ver) -{ - struct device *dev = priv->dev; - struct hermes *hw = &priv->hw; - int err; - struct comp_id nic_id, sta_id; - unsigned int firmver; - char tmp[SYMBOL_MAX_VER_LEN + 1] __attribute__((aligned(2))); - - /* Get the hardware version */ - err = HERMES_READ_RECORD_PR(hw, USER_BAP, HERMES_RID_NICID, &nic_id); - if (err) { - dev_err(dev, "Cannot read hardware identity: error %d\n", - err); - return err; - } - - le16_to_cpus(&nic_id.id); - le16_to_cpus(&nic_id.variant); - le16_to_cpus(&nic_id.major); - le16_to_cpus(&nic_id.minor); - dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n", - nic_id.id, nic_id.variant, nic_id.major, nic_id.minor); - - if (hw_ver) - *hw_ver = (((nic_id.id & 0xff) << 24) | - ((nic_id.variant & 0xff) << 16) | - ((nic_id.major & 0xff) << 8) | - (nic_id.minor & 0xff)); - - priv->firmware_type = determine_firmware_type(&nic_id); - - /* Get the firmware version */ - err = HERMES_READ_RECORD_PR(hw, USER_BAP, HERMES_RID_STAID, &sta_id); - if (err) { - dev_err(dev, "Cannot read station identity: error %d\n", - err); - return err; - } - - le16_to_cpus(&sta_id.id); - le16_to_cpus(&sta_id.variant); - le16_to_cpus(&sta_id.major); - le16_to_cpus(&sta_id.minor); - dev_info(dev, "Station identity %04x:%04x:%04x:%04x\n", - sta_id.id, sta_id.variant, sta_id.major, sta_id.minor); - - switch (sta_id.id) { - case 0x15: - dev_err(dev, "Primary firmware is active\n"); - return -ENODEV; - case 0x14b: - dev_err(dev, "Tertiary firmware is active\n"); - return -ENODEV; - case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ - case 0x21: /* Symbol Spectrum24 Trilogy */ - break; - default: - dev_notice(dev, "Unknown station ID, please report\n"); - break; - } - - /* Default capabilities */ - priv->has_sensitivity = 1; - priv->has_mwo = 0; - priv->has_preamble = 0; - priv->has_port3 = 1; - priv->has_ibss = 1; - priv->has_wep = 0; - priv->has_big_wep = 0; - priv->has_alt_txcntl = 0; - priv->has_ext_scan = 0; - priv->has_wpa = 0; - priv->do_fw_download = 0; - - /* Determine capabilities from the firmware version */ - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, - ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ - if (fw_name) - snprintf(fw_name, fw_name_len, "Lucent/Agere %d.%02d", - sta_id.major, sta_id.minor); - - firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; - - priv->has_ibss = (firmver >= 0x60006); - priv->has_wep = (firmver >= 0x40020); - priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell - Gold cards from the others? */ - priv->has_mwo = (firmver >= 0x60000); - priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ - priv->ibss_port = 1; - priv->has_hostscan = (firmver >= 0x8000a); - priv->do_fw_download = 1; - priv->broken_monitor = (firmver >= 0x80000); - priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ - priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ - priv->has_wpa = (firmver >= 0x9002a); - /* Tested with Agere firmware : - * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II - * Tested CableTron firmware : 4.32 => Anton */ - break; - case FIRMWARE_TYPE_SYMBOL: - /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ - /* Intel MAC : 00:02:B3:* */ - /* 3Com MAC : 00:50:DA:* */ - memset(tmp, 0, sizeof(tmp)); - /* Get the Symbol firmware version */ - err = hw->ops->read_ltv_pr(hw, USER_BAP, - HERMES_RID_SECONDARYVERSION_SYMBOL, - SYMBOL_MAX_VER_LEN, NULL, &tmp); - if (err) { - dev_warn(dev, "Error %d reading Symbol firmware info. " - "Wildly guessing capabilities...\n", err); - firmver = 0; - tmp[0] = '\0'; - } else { - /* The firmware revision is a string, the format is - * something like : "V2.20-01". - * Quick and dirty parsing... - Jean II - */ - firmver = ((tmp[1] - '0') << 16) - | ((tmp[3] - '0') << 12) - | ((tmp[4] - '0') << 8) - | ((tmp[6] - '0') << 4) - | (tmp[7] - '0'); - - tmp[SYMBOL_MAX_VER_LEN] = '\0'; - } - - if (fw_name) - snprintf(fw_name, fw_name_len, "Symbol %s", tmp); - - priv->has_ibss = (firmver >= 0x20000); - priv->has_wep = (firmver >= 0x15012); - priv->has_big_wep = (firmver >= 0x20000); - priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || - (firmver >= 0x29000 && firmver < 0x30000) || - firmver >= 0x31000; - priv->has_preamble = (firmver >= 0x20000); - priv->ibss_port = 4; - - /* Symbol firmware is found on various cards, but - * there has been no attempt to check firmware - * download on non-spectrum_cs based cards. - * - * Given that the Agere firmware download works - * differently, we should avoid doing a firmware - * download with the Symbol algorithm on non-spectrum - * cards. - * - * For now we can identify a spectrum_cs based card - * because it has a firmware reset function. - */ - priv->do_fw_download = (priv->stop_fw != NULL); - - priv->broken_disableport = (firmver == 0x25013) || - (firmver >= 0x30000 && firmver <= 0x31000); - priv->has_hostscan = (firmver >= 0x31001) || - (firmver >= 0x29057 && firmver < 0x30000); - /* Tested with Intel firmware : 0x20015 => Jean II */ - /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ - break; - case FIRMWARE_TYPE_INTERSIL: - /* D-Link, Linksys, Adtron, ZoomAir, and many others... - * Samsung, Compaq 100/200 and Proxim are slightly - * different and less well tested */ - /* D-Link MAC : 00:40:05:* */ - /* Addtron MAC : 00:90:D1:* */ - if (fw_name) - snprintf(fw_name, fw_name_len, "Intersil %d.%d.%d", - sta_id.major, sta_id.minor, sta_id.variant); - - firmver = ((unsigned long)sta_id.major << 16) | - ((unsigned long)sta_id.minor << 8) | sta_id.variant; - - priv->has_ibss = (firmver >= 0x000700); /* FIXME */ - priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); - priv->has_pm = (firmver >= 0x000700); - priv->has_hostscan = (firmver >= 0x010301); - - if (firmver >= 0x000800) - priv->ibss_port = 0; - else { - dev_notice(dev, "Intersil firmware earlier than v0.8.x" - " - several features not supported\n"); - priv->ibss_port = 1; - } - break; - } - if (fw_name) - dev_info(dev, "Firmware determined as %s\n", fw_name); - -#ifndef CONFIG_HERMES_PRISM - if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { - dev_err(dev, "Support for Prism chipset is not enabled\n"); - return -ENODEV; - } -#endif - - return 0; -} - -/* Read settings from EEPROM into our private structure. - * MAC address gets dropped into callers buffer - * Can be called before netdev registration. - */ -int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr) -{ - struct device *dev = priv->dev; - struct hermes_idstring nickbuf; - struct hermes *hw = &priv->hw; - int len; - int err; - u16 reclen; - - /* Get the MAC address */ - err = hw->ops->read_ltv_pr(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, - ETH_ALEN, NULL, dev_addr); - if (err) { - dev_warn(dev, "Failed to read MAC address!\n"); - goto out; - } - - dev_dbg(dev, "MAC address %pM\n", dev_addr); - - /* Get the station name */ - err = hw->ops->read_ltv_pr(hw, USER_BAP, HERMES_RID_CNFOWNNAME, - sizeof(nickbuf), &reclen, &nickbuf); - if (err) { - dev_err(dev, "failed to read station name\n"); - goto out; - } - if (nickbuf.len) - len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); - else - len = min(IW_ESSID_MAX_SIZE, 2 * reclen); - memcpy(priv->nick, &nickbuf.val, len); - priv->nick[len] = '\0'; - - dev_dbg(dev, "Station name \"%s\"\n", priv->nick); - - /* Get allowed channels */ - err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_CHANNELLIST, - &priv->channel_mask); - if (err) { - dev_err(dev, "Failed to read channel list!\n"); - goto out; - } - - /* Get initial AP density */ - err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, - &priv->ap_density); - if (err || priv->ap_density < 1 || priv->ap_density > 3) - priv->has_sensitivity = 0; - - /* Get initial RTS threshold */ - err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, - &priv->rts_thresh); - if (err) { - dev_err(dev, "Failed to read RTS threshold!\n"); - goto out; - } - - /* Get initial fragmentation settings */ - if (priv->has_mwo) - err = hermes_read_wordrec_pr(hw, USER_BAP, - HERMES_RID_CNFMWOROBUST_AGERE, - &priv->mwo_robust); - else - err = hermes_read_wordrec_pr(hw, USER_BAP, - HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, - &priv->frag_thresh); - if (err) { - dev_err(dev, "Failed to read fragmentation settings!\n"); - goto out; - } - - /* Power management setup */ - if (priv->has_pm) { - priv->pm_on = 0; - priv->pm_mcast = 1; - err = hermes_read_wordrec_pr(hw, USER_BAP, - HERMES_RID_CNFMAXSLEEPDURATION, - &priv->pm_period); - if (err) { - dev_err(dev, "Failed to read power management " - "period!\n"); - goto out; - } - err = hermes_read_wordrec_pr(hw, USER_BAP, - HERMES_RID_CNFPMHOLDOVERDURATION, - &priv->pm_timeout); - if (err) { - dev_err(dev, "Failed to read power management " - "timeout!\n"); - goto out; - } - } - - /* Preamble setup */ - if (priv->has_preamble) { - err = hermes_read_wordrec_pr(hw, USER_BAP, - HERMES_RID_CNFPREAMBLE_SYMBOL, - &priv->preamble); - if (err) { - dev_err(dev, "Failed to read preamble setup\n"); - goto out; - } - } - - /* Retry settings */ - err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, - &priv->short_retry_limit); - if (err) { - dev_err(dev, "Failed to read short retry limit\n"); - goto out; - } - - err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, - &priv->long_retry_limit); - if (err) { - dev_err(dev, "Failed to read long retry limit\n"); - goto out; - } - - err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, - &priv->retry_lifetime); - if (err) { - dev_err(dev, "Failed to read max retry lifetime\n"); - goto out; - } - -out: - return err; -} - -/* Can be called before netdev registration */ -int orinoco_hw_allocate_fid(struct orinoco_private *priv) -{ - struct device *dev = priv->dev; - struct hermes *hw = &priv->hw; - int err; - - err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { - /* Try workaround for old Symbol firmware bug */ - priv->nicbuf_size = TX_NICBUF_SIZE_BUG; - err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); - - dev_warn(dev, "Firmware ALLOC bug detected " - "(old Symbol firmware?). Work around %s\n", - err ? "failed!" : "ok."); - } - - return err; -} - -int orinoco_get_bitratemode(int bitrate, int automatic) -{ - int ratemode = -1; - int i; - - if ((bitrate != 10) && (bitrate != 20) && - (bitrate != 55) && (bitrate != 110)) - return ratemode; - - for (i = 0; i < BITRATE_TABLE_SIZE; i++) { - if ((bitrate_table[i].bitrate == bitrate) && - (bitrate_table[i].automatic == automatic)) { - ratemode = i; - break; - } - } - return ratemode; -} - -void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic) -{ - BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); - - *bitrate = bitrate_table[ratemode].bitrate * 100000; - *automatic = bitrate_table[ratemode].automatic; -} - -int orinoco_hw_program_rids(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct wireless_dev *wdev = netdev_priv(dev); - struct hermes *hw = &priv->hw; - int err; - struct hermes_idstring idbuf; - - /* Set the MAC address */ - err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, - HERMES_BYTES_TO_RECLEN(ETH_ALEN), - dev->dev_addr); - if (err) { - printk(KERN_ERR "%s: Error %d setting MAC address\n", - dev->name, err); - return err; - } - - /* Set up the link mode */ - err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, - priv->port_type); - if (err) { - printk(KERN_ERR "%s: Error %d setting port type\n", - dev->name, err); - return err; - } - /* Set the channel/frequency */ - if (priv->channel != 0 && priv->iw_mode != NL80211_IFTYPE_STATION) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFOWNCHANNEL, - priv->channel); - if (err) { - printk(KERN_ERR "%s: Error %d setting channel %d\n", - dev->name, err, priv->channel); - return err; - } - } - - if (priv->has_ibss) { - u16 createibss; - - if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { - printk(KERN_WARNING "%s: This firmware requires an " - "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); - /* With wvlan_cs, in this case, we would crash. - * hopefully, this driver will behave better... - * Jean II */ - createibss = 0; - } else { - createibss = priv->createibss; - } - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFCREATEIBSS, - createibss); - if (err) { - printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", - dev->name, err); - return err; - } - } - - /* Set the desired BSSID */ - err = __orinoco_hw_set_wap(priv); - if (err) { - printk(KERN_ERR "%s: Error %d setting AP address\n", - dev->name, err); - return err; - } - - /* Set the desired ESSID */ - idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); - memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); - /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ - err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, - HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2), - &idbuf); - if (err) { - printk(KERN_ERR "%s: Error %d setting OWNSSID\n", - dev->name, err); - return err; - } - err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, - HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2), - &idbuf); - if (err) { - printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", - dev->name, err); - return err; - } - - /* Set the station name */ - idbuf.len = cpu_to_le16(strlen(priv->nick)); - memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); - err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, - HERMES_BYTES_TO_RECLEN(strlen(priv->nick) + 2), - &idbuf); - if (err) { - printk(KERN_ERR "%s: Error %d setting nickname\n", - dev->name, err); - return err; - } - - /* Set AP density */ - if (priv->has_sensitivity) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSYSTEMSCALE, - priv->ap_density); - if (err) { - printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " - "Disabling sensitivity control\n", - dev->name, err); - - priv->has_sensitivity = 0; - } - } - - /* Set RTS threshold */ - err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, - priv->rts_thresh); - if (err) { - printk(KERN_ERR "%s: Error %d setting RTS threshold\n", - dev->name, err); - return err; - } - - /* Set fragmentation threshold or MWO robustness */ - if (priv->has_mwo) - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFMWOROBUST_AGERE, - priv->mwo_robust); - else - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, - priv->frag_thresh); - if (err) { - printk(KERN_ERR "%s: Error %d setting fragmentation\n", - dev->name, err); - return err; - } - - /* Set bitrate */ - err = __orinoco_hw_set_bitrate(priv); - if (err) { - printk(KERN_ERR "%s: Error %d setting bitrate\n", - dev->name, err); - return err; - } - - /* Set power management */ - if (priv->has_pm) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMENABLED, - priv->pm_on); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFMULTICASTRECEIVE, - priv->pm_mcast); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFMAXSLEEPDURATION, - priv->pm_period); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMHOLDOVERDURATION, - priv->pm_timeout); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - } - - /* Set preamble - only for Symbol so far... */ - if (priv->has_preamble) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPREAMBLE_SYMBOL, - priv->preamble); - if (err) { - printk(KERN_ERR "%s: Error %d setting preamble\n", - dev->name, err); - return err; - } - } - - /* Set up encryption */ - if (priv->has_wep || priv->has_wpa) { - err = __orinoco_hw_setup_enc(priv); - if (err) { - printk(KERN_ERR "%s: Error %d activating encryption\n", - dev->name, err); - return err; - } - } - - if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { - /* Enable monitor mode */ - dev->type = ARPHRD_IEEE80211; - err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_MONITOR, 0, NULL); - } else { - /* Disable monitor mode */ - dev->type = ARPHRD_ETHER; - err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_STOP, 0, NULL); - } - if (err) - return err; - - /* Reset promiscuity / multicast*/ - priv->promiscuous = 0; - priv->mc_count = 0; - - /* Record mode change */ - wdev->iftype = priv->iw_mode; - - return 0; -} - -/* Get tsc from the firmware */ -int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc) -{ - struct hermes *hw = &priv->hw; - int err = 0; - u8 tsc_arr[4][ORINOCO_SEQ_LEN]; - - if ((key < 0) || (key >= 4)) - return -EINVAL; - - err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, - sizeof(tsc_arr), NULL, &tsc_arr); - if (!err) - memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); - - return err; -} - -int __orinoco_hw_set_bitrate(struct orinoco_private *priv) -{ - struct hermes *hw = &priv->hw; - int ratemode = priv->bitratemode; - int err = 0; - - if (ratemode >= BITRATE_TABLE_SIZE) { - printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", - priv->ndev->name, ratemode); - return -EINVAL; - } - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFTXRATECONTROL, - bitrate_table[ratemode].agere_txratectrl); - break; - case FIRMWARE_TYPE_INTERSIL: - case FIRMWARE_TYPE_SYMBOL: - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFTXRATECONTROL, - bitrate_table[ratemode].intersil_txratectrl); - break; - default: - BUG(); - } - - return err; -} - -int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate) -{ - struct hermes *hw = &priv->hw; - int i; - int err = 0; - u16 val; - - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CURRENTTXRATE, &val); - if (err) - return err; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ - /* Note : in Lucent firmware, the return value of - * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, - * and therefore is totally different from the - * encoding of HERMES_RID_CNFTXRATECONTROL. - * Don't forget that 6Mb/s is really 5.5Mb/s */ - if (val == 6) - *bitrate = 5500000; - else - *bitrate = val * 1000000; - break; - case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ - case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ - for (i = 0; i < BITRATE_TABLE_SIZE; i++) - if (bitrate_table[i].intersil_txratectrl == val) { - *bitrate = bitrate_table[i].bitrate * 100000; - break; - } - - if (i >= BITRATE_TABLE_SIZE) { - printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", - priv->ndev->name, val); - err = -EIO; - } - - break; - default: - BUG(); - } - - return err; -} - -/* Set fixed AP address */ -int __orinoco_hw_set_wap(struct orinoco_private *priv) -{ - int roaming_flag; - int err = 0; - struct hermes *hw = &priv->hw; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - /* not supported */ - break; - case FIRMWARE_TYPE_INTERSIL: - if (priv->bssid_fixed) - roaming_flag = 2; - else - roaming_flag = 1; - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFROAMINGMODE, - roaming_flag); - break; - case FIRMWARE_TYPE_SYMBOL: - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFMANDATORYBSSID_SYMBOL, - &priv->desired_bssid); - break; - } - return err; -} - -/* Change the WEP keys and/or the current keys. Can be called - * either from __orinoco_hw_setup_enc() or directly from - * orinoco_ioctl_setiwencode(). In the later case the association - * with the AP is not broken (if the firmware can handle it), - * which is needed for 802.1x implementations. */ -int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) -{ - struct hermes *hw = &priv->hw; - int err = 0; - int i; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - { - struct orinoco_key keys[ORINOCO_MAX_KEYS]; - - memset(&keys, 0, sizeof(keys)); - for (i = 0; i < ORINOCO_MAX_KEYS; i++) { - int len = min(priv->keys[i].key_len, - ORINOCO_MAX_KEY_SIZE); - memcpy(&keys[i].data, priv->keys[i].key, len); - if (len > SMALL_KEY_SIZE) - keys[i].len = cpu_to_le16(LARGE_KEY_SIZE); - else if (len > 0) - keys[i].len = cpu_to_le16(SMALL_KEY_SIZE); - else - keys[i].len = cpu_to_le16(0); - } - - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFWEPKEYS_AGERE, - &keys); - if (err) - return err; - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFTXKEY_AGERE, - priv->tx_key); - if (err) - return err; - break; - } - case FIRMWARE_TYPE_INTERSIL: - case FIRMWARE_TYPE_SYMBOL: - { - int keylen; - - /* Force uniform key length to work around - * firmware bugs */ - keylen = priv->keys[priv->tx_key].key_len; - - if (keylen > LARGE_KEY_SIZE) { - printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", - priv->ndev->name, priv->tx_key, keylen); - return -E2BIG; - } else if (keylen > SMALL_KEY_SIZE) - keylen = LARGE_KEY_SIZE; - else if (keylen > 0) - keylen = SMALL_KEY_SIZE; - else - keylen = 0; - - /* Write all 4 keys */ - for (i = 0; i < ORINOCO_MAX_KEYS; i++) { - u8 key[LARGE_KEY_SIZE] = { 0 }; - - memcpy(key, priv->keys[i].key, - priv->keys[i].key_len); - - err = hw->ops->write_ltv(hw, USER_BAP, - HERMES_RID_CNFDEFAULTKEY0 + i, - HERMES_BYTES_TO_RECLEN(keylen), - key); - if (err) - return err; - } - - /* Write the index of the key used in transmission */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFWEPDEFAULTKEYID, - priv->tx_key); - if (err) - return err; - } - break; - } - - return 0; -} - -int __orinoco_hw_setup_enc(struct orinoco_private *priv) -{ - struct hermes *hw = &priv->hw; - int err = 0; - int master_wep_flag; - int auth_flag; - int enc_flag; - - /* Setup WEP keys */ - if (priv->encode_alg == ORINOCO_ALG_WEP) - __orinoco_hw_setup_wepkeys(priv); - - if (priv->wep_restrict) - auth_flag = HERMES_AUTH_SHARED_KEY; - else - auth_flag = HERMES_AUTH_OPEN; - - if (priv->wpa_enabled) - enc_flag = 2; - else if (priv->encode_alg == ORINOCO_ALG_WEP) - enc_flag = 1; - else - enc_flag = 0; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ - if (priv->encode_alg == ORINOCO_ALG_WEP) { - /* Enable the shared-key authentication. */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFAUTHENTICATION_AGERE, - auth_flag); - if (err) - return err; - } - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFWEPENABLED_AGERE, - enc_flag); - if (err) - return err; - - if (priv->has_wpa) { - /* Set WPA key management */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, - priv->key_mgmt); - if (err) - return err; - } - - break; - - case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ - case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ - if (priv->encode_alg == ORINOCO_ALG_WEP) { - if (priv->wep_restrict || - (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) - master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | - HERMES_WEP_EXCL_UNENCRYPTED; - else - master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFAUTHENTICATION, - auth_flag); - if (err) - return err; - } else - master_wep_flag = 0; - - if (priv->iw_mode == NL80211_IFTYPE_MONITOR) - master_wep_flag |= HERMES_WEP_HOST_DECRYPT; - - /* Master WEP setting : on/off */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFWEPFLAGS_INTERSIL, - master_wep_flag); - if (err) - return err; - - break; - } - - return 0; -} - -/* key must be 32 bytes, including the tx and rx MIC keys. - * rsc must be NULL or up to 8 bytes - * tsc must be NULL or up to 8 bytes - */ -int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, - int set_tx, const u8 *key, size_t key_len, - const u8 *rsc, size_t rsc_len, - const u8 *tsc, size_t tsc_len) -{ - struct { - __le16 idx; - u8 rsc[ORINOCO_SEQ_LEN]; - struct { - u8 key[TKIP_KEYLEN]; - u8 tx_mic[MIC_KEYLEN]; - u8 rx_mic[MIC_KEYLEN]; - } tkip; - u8 tsc[ORINOCO_SEQ_LEN]; - } __packed buf; - struct hermes *hw = &priv->hw; - int ret; - int err; - int k; - u16 xmitting; - - key_idx &= 0x3; - - if (set_tx) - key_idx |= 0x8000; - - buf.idx = cpu_to_le16(key_idx); - if (key_len != sizeof(buf.tkip)) - return -EINVAL; - memcpy(&buf.tkip, key, sizeof(buf.tkip)); - - if (rsc_len > sizeof(buf.rsc)) - rsc_len = sizeof(buf.rsc); - - if (tsc_len > sizeof(buf.tsc)) - tsc_len = sizeof(buf.tsc); - - memset(buf.rsc, 0, sizeof(buf.rsc)); - memset(buf.tsc, 0, sizeof(buf.tsc)); - - if (rsc != NULL) - memcpy(buf.rsc, rsc, rsc_len); - - if (tsc != NULL) - memcpy(buf.tsc, tsc, tsc_len); - else - buf.tsc[4] = 0x10; - - /* Wait up to 100ms for tx queue to empty */ - for (k = 100; k > 0; k--) { - udelay(1000); - ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, - &xmitting); - if (ret || !xmitting) - break; - } - - if (k == 0) - ret = -ETIMEDOUT; - - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, - &buf); - - return ret ? ret : err; -} - -int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx) -{ - struct hermes *hw = &priv->hw; - int err; - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, - key_idx); - if (err) - printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", - priv->ndev->name, err, key_idx); - return err; -} - -int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, - struct net_device *dev, - int mc_count, int promisc) -{ - struct hermes *hw = &priv->hw; - int err = 0; - - if (promisc != priv->promiscuous) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPROMISCUOUSMODE, - promisc); - if (err) { - printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", - priv->ndev->name, err); - } else - priv->promiscuous = promisc; - } - - /* If we're not in promiscuous mode, then we need to set the - * group address if either we want to multicast, or if we were - * multicasting and want to stop */ - if (!promisc && (mc_count || priv->mc_count)) { - struct netdev_hw_addr *ha; - struct hermes_multicast mclist; - int i = 0; - - netdev_for_each_mc_addr(ha, dev) { - if (i == mc_count) - break; - memcpy(mclist.addr[i++], ha->addr, ETH_ALEN); - } - - err = hw->ops->write_ltv(hw, USER_BAP, - HERMES_RID_CNFGROUPADDRESSES, - HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), - &mclist); - if (err) - printk(KERN_ERR "%s: Error %d setting multicast list.\n", - priv->ndev->name, err); - else - priv->mc_count = mc_count; - } - return err; -} - -/* Return : < 0 -> error code ; >= 0 -> length */ -int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, - char buf[IW_ESSID_MAX_SIZE + 1]) -{ - struct hermes *hw = &priv->hw; - int err = 0; - struct hermes_idstring essidbuf; - char *p = (char *)(&essidbuf.val); - int len; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (strlen(priv->desired_essid) > 0) { - /* We read the desired SSID from the hardware rather - than from priv->desired_essid, just in case the - firmware is allowed to change it on us. I'm not - sure about this */ - /* My guess is that the OWNSSID should always be whatever - * we set to the card, whereas CURRENT_SSID is the one that - * may change... - Jean II */ - u16 rid; - - *active = 1; - - rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : - HERMES_RID_CNFDESIREDSSID; - - err = hw->ops->read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), - NULL, &essidbuf); - if (err) - goto fail_unlock; - } else { - *active = 0; - - err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, - sizeof(essidbuf), NULL, &essidbuf); - if (err) - goto fail_unlock; - } - - len = le16_to_cpu(essidbuf.len); - BUG_ON(len > IW_ESSID_MAX_SIZE); - - memset(buf, 0, IW_ESSID_MAX_SIZE); - memcpy(buf, p, len); - err = len; - - fail_unlock: - orinoco_unlock(priv, &flags); - - return err; -} - -int orinoco_hw_get_freq(struct orinoco_private *priv) -{ - struct hermes *hw = &priv->hw; - int err = 0; - u16 channel; - int freq = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, - &channel); - if (err) - goto out; - - /* Intersil firmware 1.3.5 returns 0 when the interface is down */ - if (channel == 0) { - err = -EBUSY; - goto out; - } - - if ((channel < 1) || (channel > NUM_CHANNELS)) { - printk(KERN_WARNING "%s: Channel out of range (%d)!\n", - priv->ndev->name, channel); - err = -EBUSY; - goto out; - - } - freq = ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ); - - out: - orinoco_unlock(priv, &flags); - - if (err > 0) - err = -EBUSY; - return err ? err : freq; -} - -int orinoco_hw_get_bitratelist(struct orinoco_private *priv, - int *numrates, s32 *rates, int max) -{ - struct hermes *hw = &priv->hw; - struct hermes_idstring list; - unsigned char *p = (unsigned char *)&list.val; - int err = 0; - int num; - int i; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, - sizeof(list), NULL, &list); - orinoco_unlock(priv, &flags); - - if (err) - return err; - - num = le16_to_cpu(list.len); - *numrates = num; - num = min(num, max); - - for (i = 0; i < num; i++) - rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ - - return 0; -} - -int orinoco_hw_trigger_scan(struct orinoco_private *priv, - const struct cfg80211_ssid *ssid) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - unsigned long flags; - int err = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Scanning with port 0 disabled would fail */ - if (!netif_running(dev)) { - err = -ENETDOWN; - goto out; - } - - /* In monitor mode, the scan results are always empty. - * Probe responses are passed to the driver as received - * frames and could be processed in software. */ - if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { - err = -EOPNOTSUPP; - goto out; - } - - if (priv->has_hostscan) { - switch (priv->firmware_type) { - case FIRMWARE_TYPE_SYMBOL: - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFHOSTSCAN_SYMBOL, - HERMES_HOSTSCAN_SYMBOL_ONCE | - HERMES_HOSTSCAN_SYMBOL_BCAST); - break; - case FIRMWARE_TYPE_INTERSIL: { - __le16 req[3]; - - req[0] = cpu_to_le16(0x3fff); /* All channels */ - req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ - req[2] = 0; /* Any ESSID */ - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFHOSTSCAN, &req); - break; - } - case FIRMWARE_TYPE_AGERE: - if (ssid->ssid_len > 0) { - struct hermes_idstring idbuf; - size_t len = ssid->ssid_len; - - idbuf.len = cpu_to_le16(len); - memcpy(idbuf.val, ssid->ssid, len); - - err = hw->ops->write_ltv(hw, USER_BAP, - HERMES_RID_CNFSCANSSID_AGERE, - HERMES_BYTES_TO_RECLEN(len + 2), - &idbuf); - } else - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSCANSSID_AGERE, - 0); /* Any ESSID */ - if (err) - break; - - if (priv->has_ext_scan) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSCANCHANNELS2GHZ, - 0x7FFF); - if (err) - goto out; - - err = hermes_inquire(hw, - HERMES_INQ_CHANNELINFO); - } else - err = hermes_inquire(hw, HERMES_INQ_SCAN); - - break; - } - } else - err = hermes_inquire(hw, HERMES_INQ_SCAN); - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -/* Disassociate from node with BSSID addr */ -int orinoco_hw_disassociate(struct orinoco_private *priv, - u8 *addr, u16 reason_code) -{ - struct hermes *hw = &priv->hw; - int err; - - struct { - u8 addr[ETH_ALEN]; - __le16 reason_code; - } __packed buf; - - /* Currently only supported by WPA enabled Agere fw */ - if (!priv->has_wpa) - return -EOPNOTSUPP; - - memcpy(buf.addr, addr, ETH_ALEN); - buf.reason_code = cpu_to_le16(reason_code); - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFDISASSOCIATE, - &buf); - return err; -} - -int orinoco_hw_get_current_bssid(struct orinoco_private *priv, - u8 *addr) -{ - struct hermes *hw = &priv->hw; - int err; - - err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, - ETH_ALEN, NULL, addr); - - return err; -} diff --git a/drivers/net/wireless/intersil/orinoco/hw.h b/drivers/net/wireless/intersil/orinoco/hw.h deleted file mode 100644 index da5804dbdf..0000000000 --- a/drivers/net/wireless/intersil/orinoco/hw.h +++ /dev/null @@ -1,60 +0,0 @@ -/* Encapsulate basic setting changes on Hermes hardware - * - * See copyright notice in main.c - */ -#ifndef _ORINOCO_HW_H_ -#define _ORINOCO_HW_H_ - -#include <linux/types.h> -#include <linux/wireless.h> -#include <net/cfg80211.h> - -/* Hardware BAPs */ -#define USER_BAP 0 -#define IRQ_BAP 1 - -/* WEP key sizes */ -#define SMALL_KEY_SIZE 5 -#define LARGE_KEY_SIZE 13 - -/* Number of supported channels */ -#define NUM_CHANNELS 14 - -/* Forward declarations */ -struct orinoco_private; - -int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name, - size_t fw_name_len, u32 *hw_ver); -int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr); -int orinoco_hw_allocate_fid(struct orinoco_private *priv); -int orinoco_get_bitratemode(int bitrate, int automatic); -void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic); - -int orinoco_hw_program_rids(struct orinoco_private *priv); -int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc); -int __orinoco_hw_set_bitrate(struct orinoco_private *priv); -int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate); -int __orinoco_hw_set_wap(struct orinoco_private *priv); -int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv); -int __orinoco_hw_setup_enc(struct orinoco_private *priv); -int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, - int set_tx, const u8 *key, size_t key_len, - const u8 *rsc, size_t rsc_len, - const u8 *tsc, size_t tsc_len); -int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx); -int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, - struct net_device *dev, - int mc_count, int promisc); -int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, - char buf[IW_ESSID_MAX_SIZE + 1]); -int orinoco_hw_get_freq(struct orinoco_private *priv); -int orinoco_hw_get_bitratelist(struct orinoco_private *priv, - int *numrates, s32 *rates, int max); -int orinoco_hw_trigger_scan(struct orinoco_private *priv, - const struct cfg80211_ssid *ssid); -int orinoco_hw_disassociate(struct orinoco_private *priv, - u8 *addr, u16 reason_code); -int orinoco_hw_get_current_bssid(struct orinoco_private *priv, - u8 *addr); - -#endif /* _ORINOCO_HW_H_ */ diff --git a/drivers/net/wireless/intersil/orinoco/main.c b/drivers/net/wireless/intersil/orinoco/main.c deleted file mode 100644 index 7df88d20ff..0000000000 --- a/drivers/net/wireless/intersil/orinoco/main.c +++ /dev/null @@ -1,2414 +0,0 @@ -/* main.c - (formerly known as dldwd_cs.c, orinoco_cs.c and orinoco.c) - * - * A driver for Hermes or Prism 2 chipset based PCMCIA wireless - * adaptors, with Lucent/Agere, Intersil or Symbol firmware. - * - * Current maintainers (as of 29 September 2003) are: - * Pavel Roskin <proski AT gnu.org> - * and David Gibson <hermes AT gibson.dropbear.id.au> - * - * (C) Copyright David Gibson, IBM Corporation 2001-2003. - * Copyright (C) 2000 David Gibson, Linuxcare Australia. - * With some help from : - * Copyright (C) 2001 Jean Tourrilhes, HP Labs - * Copyright (C) 2001 Benjamin Herrenschmidt - * - * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 - * - * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy - * AT fasta.fh-dortmund.de> - * http://www.stud.fh-dortmund.de/~andy/wvlan/ - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * The initial developer of the original code is David A. Hinds - * <dahinds AT users.sourceforge.net>. Portions created by David - * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights - * Reserved. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. */ - -/* - * TODO - * o Handle de-encapsulation within network layer, provide 802.11 - * headers (patch from Thomas 'Dent' Mirlacher) - * o Fix possible races in SPY handling. - * o Disconnect wireless extensions from fundamental configuration. - * o (maybe) Software WEP support (patch from Stano Meduna). - * o (maybe) Use multiple Tx buffers - driver handling queue - * rather than firmware. - */ - -/* Locking and synchronization: - * - * The basic principle is that everything is serialized through a - * single spinlock, priv->lock. The lock is used in user, bh and irq - * context, so when taken outside hardirq context it should always be - * taken with interrupts disabled. The lock protects both the - * hardware and the struct orinoco_private. - * - * Another flag, priv->hw_unavailable indicates that the hardware is - * unavailable for an extended period of time (e.g. suspended, or in - * the middle of a hard reset). This flag is protected by the - * spinlock. All code which touches the hardware should check the - * flag after taking the lock, and if it is set, give up on whatever - * they are doing and drop the lock again. The orinoco_lock() - * function handles this (it unlocks and returns -EBUSY if - * hw_unavailable is non-zero). - */ - -#define DRIVER_NAME "orinoco" - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/suspend.h> -#include <linux/if_arp.h> -#include <linux/wireless.h> -#include <linux/ieee80211.h> -#include <net/iw_handler.h> -#include <net/cfg80211.h> - -#include "hermes_rid.h" -#include "hermes_dld.h" -#include "hw.h" -#include "scan.h" -#include "mic.h" -#include "fw.h" -#include "wext.h" -#include "cfg.h" -#include "main.h" - -#include "orinoco.h" - -/********************************************************************/ -/* Module information */ -/********************************************************************/ - -MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & " - "David Gibson <hermes@gibson.dropbear.id.au>"); -MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based " - "and similar wireless cards"); -MODULE_LICENSE("Dual MPL/GPL"); - -/* Level of debugging. Used in the macros in orinoco.h */ -#ifdef ORINOCO_DEBUG -int orinoco_debug = ORINOCO_DEBUG; -EXPORT_SYMBOL(orinoco_debug); -module_param(orinoco_debug, int, 0644); -MODULE_PARM_DESC(orinoco_debug, "Debug level"); -#endif - -static bool suppress_linkstatus; /* = 0 */ -module_param(suppress_linkstatus, bool, 0644); -MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); - -static int ignore_disconnect; /* = 0 */ -module_param(ignore_disconnect, int, 0644); -MODULE_PARM_DESC(ignore_disconnect, - "Don't report lost link to the network layer"); - -int force_monitor; /* = 0 */ -module_param(force_monitor, int, 0644); -MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); - -/********************************************************************/ -/* Internal constants */ -/********************************************************************/ - -/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ -static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; -#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) - -#define ORINOCO_MIN_MTU 256 -#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD) - -#define MAX_IRQLOOPS_PER_IRQ 10 -#define MAX_IRQLOOPS_PER_JIFFY (20000 / HZ) /* Based on a guestimate of - * how many events the - * device could - * legitimately generate */ - -#define DUMMY_FID 0xFFFF - -/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ - HERMES_MAX_MULTICAST : 0)*/ -#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) - -#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ - | HERMES_EV_TX | HERMES_EV_TXEXC \ - | HERMES_EV_WTERR | HERMES_EV_INFO \ - | HERMES_EV_INFDROP) - -/********************************************************************/ -/* Data types */ -/********************************************************************/ - -/* Beginning of the Tx descriptor, used in TxExc handling */ -struct hermes_txexc_data { - struct hermes_tx_descriptor desc; - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; -} __packed; - -/* Rx frame header except compatibility 802.3 header */ -struct hermes_rx_descriptor { - /* Control */ - __le16 status; - __le32 time; - u8 silence; - u8 signal; - u8 rate; - u8 rxflow; - __le32 reserved; - - /* 802.11 header */ - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - __le16 seq_ctl; - u8 addr4[ETH_ALEN]; - - /* Data length */ - __le16 data_len; -} __packed; - -struct orinoco_rx_data { - struct hermes_rx_descriptor *desc; - struct sk_buff *skb; - struct list_head list; -}; - -struct orinoco_scan_data { - void *buf; - size_t len; - int type; - struct list_head list; -}; - -/********************************************************************/ -/* Function prototypes */ -/********************************************************************/ - -static int __orinoco_set_multicast_list(struct net_device *dev); -static int __orinoco_up(struct orinoco_private *priv); -static int __orinoco_down(struct orinoco_private *priv); -static int __orinoco_commit(struct orinoco_private *priv); - -/********************************************************************/ -/* Internal helper functions */ -/********************************************************************/ - -void set_port_type(struct orinoco_private *priv) -{ - switch (priv->iw_mode) { - case NL80211_IFTYPE_STATION: - priv->port_type = 1; - priv->createibss = 0; - break; - case NL80211_IFTYPE_ADHOC: - if (priv->prefer_port3) { - priv->port_type = 3; - priv->createibss = 0; - } else { - priv->port_type = priv->ibss_port; - priv->createibss = 1; - } - break; - case NL80211_IFTYPE_MONITOR: - priv->port_type = 3; - priv->createibss = 0; - break; - default: - printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", - priv->ndev->name); - } -} - -/********************************************************************/ -/* Device methods */ -/********************************************************************/ - -int orinoco_open(struct net_device *dev) -{ - struct orinoco_private *priv = ndev_priv(dev); - unsigned long flags; - int err; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = __orinoco_up(priv); - - if (!err) - priv->open = 1; - - orinoco_unlock(priv, &flags); - - return err; -} -EXPORT_SYMBOL(orinoco_open); - -int orinoco_stop(struct net_device *dev) -{ - struct orinoco_private *priv = ndev_priv(dev); - int err = 0; - - /* We mustn't use orinoco_lock() here, because we need to be - able to close the interface even if hw_unavailable is set - (e.g. as we're released after a PC Card removal) */ - orinoco_lock_irq(priv); - - priv->open = 0; - - err = __orinoco_down(priv); - - orinoco_unlock_irq(priv); - - return err; -} -EXPORT_SYMBOL(orinoco_stop); - -void orinoco_set_multicast_list(struct net_device *dev) -{ - struct orinoco_private *priv = ndev_priv(dev); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) { - printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " - "called when hw_unavailable\n", dev->name); - return; - } - - __orinoco_set_multicast_list(dev); - orinoco_unlock(priv, &flags); -} -EXPORT_SYMBOL(orinoco_set_multicast_list); - -int orinoco_change_mtu(struct net_device *dev, int new_mtu) -{ - struct orinoco_private *priv = ndev_priv(dev); - - /* MTU + encapsulation + header length */ - if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) > - (priv->nicbuf_size - ETH_HLEN)) - return -EINVAL; - - dev->mtu = new_mtu; - - return 0; -} -EXPORT_SYMBOL(orinoco_change_mtu); - -/********************************************************************/ -/* Tx path */ -/********************************************************************/ - -/* Add encapsulation and MIC to the existing SKB. - * The main xmit routine will then send the whole lot to the card. - * Need 8 bytes headroom - * Need 8 bytes tailroom - * - * With encapsulated ethernet II frame - * -------- - * 803.3 header (14 bytes) - * dst[6] - * -------- src[6] - * 803.3 header (14 bytes) len[2] - * dst[6] 803.2 header (8 bytes) - * src[6] encaps[6] - * len[2] <- leave alone -> len[2] - * -------- -------- <-- 0 - * Payload Payload - * ... ... - * - * -------- -------- - * MIC (8 bytes) - * -------- - * - * returns 0 on success, -ENOMEM on error. - */ -int orinoco_process_xmit_skb(struct sk_buff *skb, - struct net_device *dev, - struct orinoco_private *priv, - int *tx_control, - u8 *mic_buf) -{ - struct orinoco_tkip_key *key; - struct ethhdr *eh; - int do_mic; - - key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key; - - do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) && - (key != NULL)); - - if (do_mic) - *tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) | - HERMES_TXCTRL_MIC; - - eh = (struct ethhdr *)skb->data; - - /* Encapsulate Ethernet-II frames */ - if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ - struct header_struct { - struct ethhdr eth; /* 802.3 header */ - u8 encap[6]; /* 802.2 header */ - } __packed hdr; - int len = skb->len + sizeof(encaps_hdr) - (2 * ETH_ALEN); - - if (skb_headroom(skb) < ENCAPS_OVERHEAD) { - if (net_ratelimit()) - printk(KERN_ERR - "%s: Not enough headroom for 802.2 headers %d\n", - dev->name, skb_headroom(skb)); - return -ENOMEM; - } - - /* Fill in new header */ - memcpy(&hdr.eth, eh, 2 * ETH_ALEN); - hdr.eth.h_proto = htons(len); - memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); - - /* Make room for the new header, and copy it in */ - eh = skb_push(skb, ENCAPS_OVERHEAD); - memcpy(eh, &hdr, sizeof(hdr)); - } - - /* Calculate Michael MIC */ - if (do_mic) { - size_t len = skb->len - ETH_HLEN; - u8 *mic = &mic_buf[0]; - - /* Have to write to an even address, so copy the spare - * byte across */ - if (skb->len % 2) { - *mic = skb->data[skb->len - 1]; - mic++; - } - - orinoco_mic(priv->tx_tfm_mic, key->tx_mic, - eh->h_dest, eh->h_source, 0 /* priority */, - skb->data + ETH_HLEN, - len, mic); - } - - return 0; -} -EXPORT_SYMBOL(orinoco_process_xmit_skb); - -static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct net_device_stats *stats = &dev->stats; - struct hermes *hw = &priv->hw; - int err = 0; - u16 txfid = priv->txfid; - int tx_control; - unsigned long flags; - u8 mic_buf[MICHAEL_MIC_LEN + 1]; - - if (!netif_running(dev)) { - printk(KERN_ERR "%s: Tx on stopped device!\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (netif_queue_stopped(dev)) { - printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (orinoco_lock(priv, &flags) != 0) { - printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (!netif_carrier_ok(dev) || - (priv->iw_mode == NL80211_IFTYPE_MONITOR)) { - /* Oops, the firmware hasn't established a connection, - silently drop the packet (this seems to be the - safest approach). */ - goto drop; - } - - /* Check packet length */ - if (skb->len < ETH_HLEN) - goto drop; - - tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX; - - err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control, - &mic_buf[0]); - if (err) - goto drop; - - if (priv->has_alt_txcntl) { - /* WPA enabled firmwares have tx_cntl at the end of - * the 802.11 header. So write zeroed descriptor and - * 802.11 header at the same time - */ - char desc[HERMES_802_3_OFFSET]; - __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET]; - - memset(&desc, 0, sizeof(desc)); - - *txcntl = cpu_to_le16(tx_control); - err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), - txfid, 0); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing Tx " - "descriptor to BAP\n", dev->name, err); - goto busy; - } - } else { - struct hermes_tx_descriptor desc; - - memset(&desc, 0, sizeof(desc)); - - desc.tx_control = cpu_to_le16(tx_control); - err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), - txfid, 0); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing Tx " - "descriptor to BAP\n", dev->name, err); - goto busy; - } - - /* Clear the 802.11 header and data length fields - some - * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused - * if this isn't done. */ - hermes_clear_words(hw, HERMES_DATA0, - HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); - } - - err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len, - txfid, HERMES_802_3_OFFSET); - if (err) { - printk(KERN_ERR "%s: Error %d writing packet to BAP\n", - dev->name, err); - goto busy; - } - - if (tx_control & HERMES_TXCTRL_MIC) { - size_t offset = HERMES_802_3_OFFSET + skb->len; - size_t len = MICHAEL_MIC_LEN; - - if (offset % 2) { - offset--; - len++; - } - err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len, - txfid, offset); - if (err) { - printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", - dev->name, err); - goto busy; - } - } - - /* Finally, we actually initiate the send */ - netif_stop_queue(dev); - - err = hw->ops->cmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, - txfid, NULL); - if (err) { - netif_start_queue(dev); - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d transmitting packet\n", - dev->name, err); - goto busy; - } - - stats->tx_bytes += HERMES_802_3_OFFSET + skb->len; - goto ok; - - drop: - stats->tx_errors++; - stats->tx_dropped++; - - ok: - orinoco_unlock(priv, &flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - - busy: - if (err == -EIO) - schedule_work(&priv->reset_work); - orinoco_unlock(priv, &flags); - return NETDEV_TX_BUSY; -} - -static void __orinoco_ev_alloc(struct net_device *dev, struct hermes *hw) -{ - struct orinoco_private *priv = ndev_priv(dev); - u16 fid = hermes_read_regn(hw, ALLOCFID); - - if (fid != priv->txfid) { - if (fid != DUMMY_FID) - printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", - dev->name, fid); - return; - } - - hermes_write_regn(hw, ALLOCFID, DUMMY_FID); -} - -static void __orinoco_ev_tx(struct net_device *dev, struct hermes *hw) -{ - dev->stats.tx_packets++; - - netif_wake_queue(dev); - - hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); -} - -static void __orinoco_ev_txexc(struct net_device *dev, struct hermes *hw) -{ - struct net_device_stats *stats = &dev->stats; - u16 fid = hermes_read_regn(hw, TXCOMPLFID); - u16 status; - struct hermes_txexc_data hdr; - int err = 0; - - if (fid == DUMMY_FID) - return; /* Nothing's really happened */ - - /* Read part of the frame header - we need status and addr1 */ - err = hw->ops->bap_pread(hw, IRQ_BAP, &hdr, - sizeof(struct hermes_txexc_data), - fid, 0); - - hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); - stats->tx_errors++; - - if (err) { - printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " - "(FID=%04X error %d)\n", - dev->name, fid, err); - return; - } - - DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, - err, fid); - - /* We produce a TXDROP event only for retry or lifetime - * exceeded, because that's the only status that really mean - * that this particular node went away. - * Other errors means that *we* screwed up. - Jean II */ - status = le16_to_cpu(hdr.desc.status); - if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { - union iwreq_data wrqu; - - /* Copy 802.11 dest address. - * We use the 802.11 header because the frame may - * not be 802.3 or may be mangled... - * In Ad-Hoc mode, it will be the node address. - * In managed mode, it will be most likely the AP addr - * User space will figure out how to convert it to - * whatever it needs (IP address or else). - * - Jean II */ - memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); - wrqu.addr.sa_family = ARPHRD_ETHER; - - /* Send event to user space */ - wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); - } - - netif_wake_queue(dev); -} - -void orinoco_tx_timeout(struct net_device *dev, unsigned int txqueue) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct net_device_stats *stats = &dev->stats; - struct hermes *hw = &priv->hw; - - printk(KERN_WARNING "%s: Tx timeout! " - "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", - dev->name, hermes_read_regn(hw, ALLOCFID), - hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); - - stats->tx_errors++; - - schedule_work(&priv->reset_work); -} -EXPORT_SYMBOL(orinoco_tx_timeout); - -/********************************************************************/ -/* Rx path (data frames) */ -/********************************************************************/ - -/* Does the frame have a SNAP header indicating it should be - * de-encapsulated to Ethernet-II? */ -static inline int is_ethersnap(void *_hdr) -{ - u8 *hdr = _hdr; - - /* We de-encapsulate all packets which, a) have SNAP headers - * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header - * and where b) the OUI of the SNAP header is 00:00:00 or - * 00:00:f8 - we need both because different APs appear to use - * different OUIs for some reason */ - return (memcmp(hdr, &encaps_hdr, 5) == 0) - && ((hdr[5] == 0x00) || (hdr[5] == 0xf8)); -} - -static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, - int level, int noise) -{ - struct iw_quality wstats; - wstats.level = level - 0x95; - wstats.noise = noise - 0x95; - wstats.qual = (level > noise) ? (level - noise) : 0; - wstats.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; - /* Update spy records */ - wireless_spy_update(dev, mac, &wstats); -} - -static void orinoco_stat_gather(struct net_device *dev, - struct sk_buff *skb, - struct hermes_rx_descriptor *desc) -{ - struct orinoco_private *priv = ndev_priv(dev); - - /* Using spy support with lots of Rx packets, like in an - * infrastructure (AP), will really slow down everything, because - * the MAC address must be compared to each entry of the spy list. - * If the user really asks for it (set some address in the - * spy list), we do it, but he will pay the price. - * Note that to get here, you need both WIRELESS_SPY - * compiled in AND some addresses in the list !!! - */ - /* Note : gcc will optimise the whole section away if - * WIRELESS_SPY is not defined... - Jean II */ - if (SPY_NUMBER(priv)) { - orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN, - desc->signal, desc->silence); - } -} - -/* - * orinoco_rx_monitor - handle received monitor frames. - * - * Arguments: - * dev network device - * rxfid received FID - * desc rx descriptor of the frame - * - * Call context: interrupt - */ -static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, - struct hermes_rx_descriptor *desc) -{ - u32 hdrlen = 30; /* return full header by default */ - u32 datalen = 0; - u16 fc; - int err; - int len; - struct sk_buff *skb; - struct orinoco_private *priv = ndev_priv(dev); - struct net_device_stats *stats = &dev->stats; - struct hermes *hw = &priv->hw; - - len = le16_to_cpu(desc->data_len); - - /* Determine the size of the header and the data */ - fc = le16_to_cpu(desc->frame_ctl); - switch (fc & IEEE80211_FCTL_FTYPE) { - case IEEE80211_FTYPE_DATA: - if ((fc & IEEE80211_FCTL_TODS) - && (fc & IEEE80211_FCTL_FROMDS)) - hdrlen = 30; - else - hdrlen = 24; - datalen = len; - break; - case IEEE80211_FTYPE_MGMT: - hdrlen = 24; - datalen = len; - break; - case IEEE80211_FTYPE_CTL: - switch (fc & IEEE80211_FCTL_STYPE) { - case IEEE80211_STYPE_PSPOLL: - case IEEE80211_STYPE_RTS: - case IEEE80211_STYPE_CFEND: - case IEEE80211_STYPE_CFENDACK: - hdrlen = 16; - break; - case IEEE80211_STYPE_CTS: - case IEEE80211_STYPE_ACK: - hdrlen = 10; - break; - } - break; - default: - /* Unknown frame type */ - break; - } - - /* sanity check the length */ - if (datalen > IEEE80211_MAX_DATA_LEN + 12) { - printk(KERN_DEBUG "%s: oversized monitor frame, " - "data length = %d\n", dev->name, datalen); - stats->rx_length_errors++; - goto update_stats; - } - - skb = dev_alloc_skb(hdrlen + datalen); - if (!skb) { - printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", - dev->name); - goto update_stats; - } - - /* Copy the 802.11 header to the skb */ - skb_put_data(skb, &(desc->frame_ctl), hdrlen); - skb_reset_mac_header(skb); - - /* If any, copy the data from the card to the skb */ - if (datalen > 0) { - err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), - ALIGN(datalen, 2), rxfid, - HERMES_802_2_OFFSET); - if (err) { - printk(KERN_ERR "%s: error %d reading monitor frame\n", - dev->name, err); - goto drop; - } - } - - skb->dev = dev; - skb->ip_summed = CHECKSUM_NONE; - skb->pkt_type = PACKET_OTHERHOST; - skb->protocol = cpu_to_be16(ETH_P_802_2); - - stats->rx_packets++; - stats->rx_bytes += skb->len; - - netif_rx(skb); - return; - - drop: - dev_kfree_skb_irq(skb); - update_stats: - stats->rx_errors++; - stats->rx_dropped++; -} - -void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct net_device_stats *stats = &dev->stats; - struct iw_statistics *wstats = &priv->wstats; - struct sk_buff *skb = NULL; - u16 rxfid, status; - int length; - struct hermes_rx_descriptor *desc; - struct orinoco_rx_data *rx_data; - int err; - - desc = kmalloc(sizeof(*desc), GFP_ATOMIC); - if (!desc) - goto update_stats; - - rxfid = hermes_read_regn(hw, RXFID); - - err = hw->ops->bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), - rxfid, 0); - if (err) { - printk(KERN_ERR "%s: error %d reading Rx descriptor. " - "Frame dropped.\n", dev->name, err); - goto update_stats; - } - - status = le16_to_cpu(desc->status); - - if (status & HERMES_RXSTAT_BADCRC) { - DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", - dev->name); - stats->rx_crc_errors++; - goto update_stats; - } - - /* Handle frames in monitor mode */ - if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { - orinoco_rx_monitor(dev, rxfid, desc); - goto out; - } - - if (status & HERMES_RXSTAT_UNDECRYPTABLE) { - DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", - dev->name); - wstats->discard.code++; - goto update_stats; - } - - length = le16_to_cpu(desc->data_len); - - /* Sanity checks */ - if (length < 3) { /* No for even an 802.2 LLC header */ - /* At least on Symbol firmware with PCF we get quite a - lot of these legitimately - Poll frames with no - data. */ - goto out; - } - if (length > IEEE80211_MAX_DATA_LEN) { - printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", - dev->name, length); - stats->rx_length_errors++; - goto update_stats; - } - - /* Payload size does not include Michael MIC. Increase payload - * size to read it together with the data. */ - if (status & HERMES_RXSTAT_MIC) - length += MICHAEL_MIC_LEN; - - /* We need space for the packet data itself, plus an ethernet - header, plus 2 bytes so we can align the IP header on a - 32bit boundary, plus 1 byte so we can read in odd length - packets from the card, which has an IO granularity of 16 - bits */ - skb = dev_alloc_skb(length + ETH_HLEN + 2 + 1); - if (!skb) { - printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", - dev->name); - goto update_stats; - } - - /* We'll prepend the header, so reserve space for it. The worst - case is no decapsulation, when 802.3 header is prepended and - nothing is removed. 2 is for aligning the IP header. */ - skb_reserve(skb, ETH_HLEN + 2); - - err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, length), - ALIGN(length, 2), rxfid, - HERMES_802_2_OFFSET); - if (err) { - printk(KERN_ERR "%s: error %d reading frame. " - "Frame dropped.\n", dev->name, err); - goto drop; - } - - /* Add desc and skb to rx queue */ - rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC); - if (!rx_data) - goto drop; - - rx_data->desc = desc; - rx_data->skb = skb; - list_add_tail(&rx_data->list, &priv->rx_list); - tasklet_schedule(&priv->rx_tasklet); - - return; - -drop: - dev_kfree_skb_irq(skb); -update_stats: - stats->rx_errors++; - stats->rx_dropped++; -out: - kfree(desc); -} -EXPORT_SYMBOL(__orinoco_ev_rx); - -static void orinoco_rx(struct net_device *dev, - struct hermes_rx_descriptor *desc, - struct sk_buff *skb) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct net_device_stats *stats = &dev->stats; - u16 status, fc; - int length; - struct ethhdr *hdr; - - status = le16_to_cpu(desc->status); - length = le16_to_cpu(desc->data_len); - fc = le16_to_cpu(desc->frame_ctl); - - /* Calculate and check MIC */ - if (status & HERMES_RXSTAT_MIC) { - struct orinoco_tkip_key *key; - int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >> - HERMES_MIC_KEY_ID_SHIFT); - u8 mic[MICHAEL_MIC_LEN]; - u8 *rxmic; - u8 *src = (fc & IEEE80211_FCTL_FROMDS) ? - desc->addr3 : desc->addr2; - - /* Extract Michael MIC from payload */ - rxmic = skb->data + skb->len - MICHAEL_MIC_LEN; - - skb_trim(skb, skb->len - MICHAEL_MIC_LEN); - length -= MICHAEL_MIC_LEN; - - key = (struct orinoco_tkip_key *) priv->keys[key_id].key; - - if (!key) { - printk(KERN_WARNING "%s: Received encrypted frame from " - "%pM using key %i, but key is not installed\n", - dev->name, src, key_id); - goto drop; - } - - orinoco_mic(priv->rx_tfm_mic, key->rx_mic, desc->addr1, src, - 0, /* priority or QoS? */ - skb->data, skb->len, &mic[0]); - - if (memcmp(mic, rxmic, - MICHAEL_MIC_LEN)) { - union iwreq_data wrqu; - struct iw_michaelmicfailure wxmic; - - printk(KERN_WARNING "%s: " - "Invalid Michael MIC in data frame from %pM, " - "using key %i\n", - dev->name, src, key_id); - - /* TODO: update stats */ - - /* Notify userspace */ - memset(&wxmic, 0, sizeof(wxmic)); - wxmic.flags = key_id & IW_MICFAILURE_KEY_ID; - wxmic.flags |= (desc->addr1[0] & 1) ? - IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE; - wxmic.src_addr.sa_family = ARPHRD_ETHER; - memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN); - - (void) orinoco_hw_get_tkip_iv(priv, key_id, - &wxmic.tsc[0]); - - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.length = sizeof(wxmic); - wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, - (char *) &wxmic); - - goto drop; - } - } - - /* Handle decapsulation - * In most cases, the firmware tell us about SNAP frames. - * For some reason, the SNAP frames sent by LinkSys APs - * are not properly recognised by most firmwares. - * So, check ourselves */ - if (length >= ENCAPS_OVERHEAD && - (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || - ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || - is_ethersnap(skb->data))) { - /* These indicate a SNAP within 802.2 LLC within - 802.11 frame which we'll need to de-encapsulate to - the original EthernetII frame. */ - hdr = skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); - } else { - /* 802.3 frame - prepend 802.3 header as is */ - hdr = skb_push(skb, ETH_HLEN); - hdr->h_proto = htons(length); - } - memcpy(hdr->h_dest, desc->addr1, ETH_ALEN); - if (fc & IEEE80211_FCTL_FROMDS) - memcpy(hdr->h_source, desc->addr3, ETH_ALEN); - else - memcpy(hdr->h_source, desc->addr2, ETH_ALEN); - - skb->protocol = eth_type_trans(skb, dev); - skb->ip_summed = CHECKSUM_NONE; - if (fc & IEEE80211_FCTL_TODS) - skb->pkt_type = PACKET_OTHERHOST; - - /* Process the wireless stats if needed */ - orinoco_stat_gather(dev, skb, desc); - - /* Pass the packet to the networking stack */ - netif_rx(skb); - stats->rx_packets++; - stats->rx_bytes += length; - - return; - - drop: - dev_kfree_skb(skb); - stats->rx_errors++; - stats->rx_dropped++; -} - -static void orinoco_rx_isr_tasklet(struct tasklet_struct *t) -{ - struct orinoco_private *priv = from_tasklet(priv, t, rx_tasklet); - struct net_device *dev = priv->ndev; - struct orinoco_rx_data *rx_data, *temp; - struct hermes_rx_descriptor *desc; - struct sk_buff *skb; - unsigned long flags; - - /* orinoco_rx requires the driver lock, and we also need to - * protect priv->rx_list, so just hold the lock over the - * lot. - * - * If orinoco_lock fails, we've unplugged the card. In this - * case just abort. */ - if (orinoco_lock(priv, &flags) != 0) - return; - - /* extract desc and skb from queue */ - list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { - desc = rx_data->desc; - skb = rx_data->skb; - list_del(&rx_data->list); - kfree(rx_data); - - orinoco_rx(dev, desc, skb); - - kfree(desc); - } - - orinoco_unlock(priv, &flags); -} - -/********************************************************************/ -/* Rx path (info frames) */ -/********************************************************************/ - -static void print_linkstatus(struct net_device *dev, u16 status) -{ - char *s; - - if (suppress_linkstatus) - return; - - switch (status) { - case HERMES_LINKSTATUS_NOT_CONNECTED: - s = "Not Connected"; - break; - case HERMES_LINKSTATUS_CONNECTED: - s = "Connected"; - break; - case HERMES_LINKSTATUS_DISCONNECTED: - s = "Disconnected"; - break; - case HERMES_LINKSTATUS_AP_CHANGE: - s = "AP Changed"; - break; - case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: - s = "AP Out of Range"; - break; - case HERMES_LINKSTATUS_AP_IN_RANGE: - s = "AP In Range"; - break; - case HERMES_LINKSTATUS_ASSOC_FAILED: - s = "Association Failed"; - break; - default: - s = "UNKNOWN"; - } - - printk(KERN_DEBUG "%s: New link status: %s (%04x)\n", - dev->name, s, status); -} - -/* Search scan results for requested BSSID, join it if found */ -static void orinoco_join_ap(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, join_work); - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int err; - unsigned long flags; - struct join_req { - u8 bssid[ETH_ALEN]; - __le16 channel; - } __packed req; - const int atom_len = offsetof(struct prism2_scan_apinfo, atim); - struct prism2_scan_apinfo *atom = NULL; - int offset = 4; - int found = 0; - u8 *buf; - u16 len; - - /* Allocate buffer for scan results */ - buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); - if (!buf) - return; - - if (orinoco_lock(priv, &flags) != 0) - goto fail_lock; - - /* Sanity checks in case user changed something in the meantime */ - if (!priv->bssid_fixed) - goto out; - - if (strlen(priv->desired_essid) == 0) - goto out; - - /* Read scan results from the firmware */ - err = hw->ops->read_ltv(hw, USER_BAP, - HERMES_RID_SCANRESULTSTABLE, - MAX_SCAN_LEN, &len, buf); - if (err) { - printk(KERN_ERR "%s: Cannot read scan results\n", - dev->name); - goto out; - } - - len = HERMES_RECLEN_TO_BYTES(len); - - /* Go through the scan results looking for the channel of the AP - * we were requested to join */ - for (; offset + atom_len <= len; offset += atom_len) { - atom = (struct prism2_scan_apinfo *) (buf + offset); - if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { - found = 1; - break; - } - } - - if (!found) { - DEBUG(1, "%s: Requested AP not found in scan results\n", - dev->name); - goto out; - } - - memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); - req.channel = atom->channel; /* both are little-endian */ - err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, - &req); - if (err) - printk(KERN_ERR "%s: Error issuing join request\n", dev->name); - - out: - orinoco_unlock(priv, &flags); - - fail_lock: - kfree(buf); -} - -/* Send new BSSID to userspace */ -static void orinoco_send_bssid_wevent(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - union iwreq_data wrqu; - int err; - - err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, - ETH_ALEN, NULL, wrqu.ap_addr.sa_data); - if (err != 0) - return; - - wrqu.ap_addr.sa_family = ARPHRD_ETHER; - - /* Send event to user space */ - wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); -} - -static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - union iwreq_data wrqu; - int err; - u8 buf[88]; - u8 *ie; - - if (!priv->has_wpa) - return; - - err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, - sizeof(buf), NULL, &buf); - if (err != 0) - return; - - ie = orinoco_get_wpa_ie(buf, sizeof(buf)); - if (ie) { - int rem = sizeof(buf) - (ie - &buf[0]); - wrqu.data.length = ie[1] + 2; - if (wrqu.data.length > rem) - wrqu.data.length = rem; - - if (wrqu.data.length) - /* Send event to user space */ - wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie); - } -} - -static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - union iwreq_data wrqu; - int err; - u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */ - u8 *ie; - - if (!priv->has_wpa) - return; - - err = hw->ops->read_ltv(hw, USER_BAP, - HERMES_RID_CURRENT_ASSOC_RESP_INFO, - sizeof(buf), NULL, &buf); - if (err != 0) - return; - - ie = orinoco_get_wpa_ie(buf, sizeof(buf)); - if (ie) { - int rem = sizeof(buf) - (ie - &buf[0]); - wrqu.data.length = ie[1] + 2; - if (wrqu.data.length > rem) - wrqu.data.length = rem; - - if (wrqu.data.length) - /* Send event to user space */ - wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie); - } -} - -static void orinoco_send_wevents(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, wevent_work); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return; - - orinoco_send_assocreqie_wevent(priv); - orinoco_send_assocrespie_wevent(priv); - orinoco_send_bssid_wevent(priv); - - orinoco_unlock(priv, &flags); -} - -static void qbuf_scan(struct orinoco_private *priv, void *buf, - int len, int type) -{ - struct orinoco_scan_data *sd; - unsigned long flags; - - sd = kmalloc(sizeof(*sd), GFP_ATOMIC); - if (!sd) - return; - - sd->buf = buf; - sd->len = len; - sd->type = type; - - spin_lock_irqsave(&priv->scan_lock, flags); - list_add_tail(&sd->list, &priv->scan_list); - spin_unlock_irqrestore(&priv->scan_lock, flags); - - schedule_work(&priv->process_scan); -} - -static void qabort_scan(struct orinoco_private *priv) -{ - struct orinoco_scan_data *sd; - unsigned long flags; - - sd = kmalloc(sizeof(*sd), GFP_ATOMIC); - if (!sd) - return; - - sd->len = -1; /* Abort */ - - spin_lock_irqsave(&priv->scan_lock, flags); - list_add_tail(&sd->list, &priv->scan_list); - spin_unlock_irqrestore(&priv->scan_lock, flags); - - schedule_work(&priv->process_scan); -} - -static void orinoco_process_scan_results(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, process_scan); - struct orinoco_scan_data *sd, *temp; - unsigned long flags; - void *buf; - int len; - int type; - - spin_lock_irqsave(&priv->scan_lock, flags); - list_for_each_entry_safe(sd, temp, &priv->scan_list, list) { - - buf = sd->buf; - len = sd->len; - type = sd->type; - - list_del(&sd->list); - spin_unlock_irqrestore(&priv->scan_lock, flags); - kfree(sd); - - if (len > 0) { - if (type == HERMES_INQ_CHANNELINFO) - orinoco_add_extscan_result(priv, buf, len); - else - orinoco_add_hostscan_results(priv, buf, len); - - kfree(buf); - } else { - /* Either abort or complete the scan */ - orinoco_scan_done(priv, (len < 0)); - } - - spin_lock_irqsave(&priv->scan_lock, flags); - } - spin_unlock_irqrestore(&priv->scan_lock, flags); -} - -void __orinoco_ev_info(struct net_device *dev, struct hermes *hw) -{ - struct orinoco_private *priv = ndev_priv(dev); - u16 infofid; - struct { - __le16 len; - __le16 type; - } __packed info; - int len, type; - int err; - - /* This is an answer to an INQUIRE command that we did earlier, - * or an information "event" generated by the card - * The controller return to us a pseudo frame containing - * the information in question - Jean II */ - infofid = hermes_read_regn(hw, INFOFID); - - /* Read the info frame header - don't try too hard */ - err = hw->ops->bap_pread(hw, IRQ_BAP, &info, sizeof(info), - infofid, 0); - if (err) { - printk(KERN_ERR "%s: error %d reading info frame. " - "Frame dropped.\n", dev->name, err); - return; - } - - len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); - type = le16_to_cpu(info.type); - - switch (type) { - case HERMES_INQ_TALLIES: { - struct hermes_tallies_frame tallies; - struct iw_statistics *wstats = &priv->wstats; - - if (len > sizeof(tallies)) { - printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", - dev->name, len); - len = sizeof(tallies); - } - - err = hw->ops->bap_pread(hw, IRQ_BAP, &tallies, len, - infofid, sizeof(info)); - if (err) - break; - - /* Increment our various counters */ - /* wstats->discard.nwid - no wrong BSSID stuff */ - wstats->discard.code += - le16_to_cpu(tallies.RxWEPUndecryptable); - if (len == sizeof(tallies)) - wstats->discard.code += - le16_to_cpu(tallies.RxDiscards_WEPICVError) + - le16_to_cpu(tallies.RxDiscards_WEPExcluded); - wstats->discard.misc += - le16_to_cpu(tallies.TxDiscardsWrongSA); - wstats->discard.fragment += - le16_to_cpu(tallies.RxMsgInBadMsgFragments); - wstats->discard.retries += - le16_to_cpu(tallies.TxRetryLimitExceeded); - /* wstats->miss.beacon - no match */ - } - break; - case HERMES_INQ_LINKSTATUS: { - struct hermes_linkstatus linkstatus; - u16 newstatus; - int connected; - - if (priv->iw_mode == NL80211_IFTYPE_MONITOR) - break; - - if (len != sizeof(linkstatus)) { - printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", - dev->name, len); - break; - } - - err = hw->ops->bap_pread(hw, IRQ_BAP, &linkstatus, len, - infofid, sizeof(info)); - if (err) - break; - newstatus = le16_to_cpu(linkstatus.linkstatus); - - /* Symbol firmware uses "out of range" to signal that - * the hostscan frame can be requested. */ - if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && - priv->firmware_type == FIRMWARE_TYPE_SYMBOL && - priv->has_hostscan && priv->scan_request) { - hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); - break; - } - - connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) - || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) - || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); - - if (connected) - netif_carrier_on(dev); - else if (!ignore_disconnect) - netif_carrier_off(dev); - - if (newstatus != priv->last_linkstatus) { - priv->last_linkstatus = newstatus; - print_linkstatus(dev, newstatus); - /* The info frame contains only one word which is the - * status (see hermes.h). The status is pretty boring - * in itself, that's why we export the new BSSID... - * Jean II */ - schedule_work(&priv->wevent_work); - } - } - break; - case HERMES_INQ_SCAN: - if (!priv->scan_request && priv->bssid_fixed && - priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { - schedule_work(&priv->join_work); - break; - } - fallthrough; - case HERMES_INQ_HOSTSCAN: - case HERMES_INQ_HOSTSCAN_SYMBOL: { - /* Result of a scanning. Contains information about - * cells in the vicinity - Jean II */ - unsigned char *buf; - - /* Sanity check */ - if (len > 4096) { - printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", - dev->name, len); - qabort_scan(priv); - break; - } - - /* Allocate buffer for results */ - buf = kmalloc(len, GFP_ATOMIC); - if (buf == NULL) { - /* No memory, so can't printk()... */ - qabort_scan(priv); - break; - } - - /* Read scan data */ - err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) buf, len, - infofid, sizeof(info)); - if (err) { - kfree(buf); - qabort_scan(priv); - break; - } - -#ifdef ORINOCO_DEBUG - { - int i; - printk(KERN_DEBUG "Scan result [%02X", buf[0]); - for (i = 1; i < (len * 2); i++) - printk(":%02X", buf[i]); - printk("]\n"); - } -#endif /* ORINOCO_DEBUG */ - - qbuf_scan(priv, buf, len, type); - } - break; - case HERMES_INQ_CHANNELINFO: - { - struct agere_ext_scan_info *bss; - - if (!priv->scan_request) { - printk(KERN_DEBUG "%s: Got chaninfo without scan, " - "len=%d\n", dev->name, len); - break; - } - - /* An empty result indicates that the scan is complete */ - if (len == 0) { - qbuf_scan(priv, NULL, len, type); - break; - } - - /* Sanity check */ - else if (len < (offsetof(struct agere_ext_scan_info, - data) + 2)) { - /* Drop this result now so we don't have to - * keep checking later */ - printk(KERN_WARNING - "%s: Ext scan results too short (%d bytes)\n", - dev->name, len); - break; - } - - bss = kmalloc(len, GFP_ATOMIC); - if (bss == NULL) - break; - - /* Read scan data */ - err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) bss, len, - infofid, sizeof(info)); - if (err) - kfree(bss); - else - qbuf_scan(priv, bss, len, type); - - break; - } - case HERMES_INQ_SEC_STAT_AGERE: - /* Security status (Agere specific) */ - /* Ignore this frame for now */ - if (priv->firmware_type == FIRMWARE_TYPE_AGERE) - break; - fallthrough; - default: - printk(KERN_DEBUG "%s: Unknown information frame received: " - "type 0x%04x, length %d\n", dev->name, type, len); - /* We don't actually do anything about it */ - break; - } -} -EXPORT_SYMBOL(__orinoco_ev_info); - -static void __orinoco_ev_infdrop(struct net_device *dev, struct hermes *hw) -{ - if (net_ratelimit()) - printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); -} - -/********************************************************************/ -/* Internal hardware control routines */ -/********************************************************************/ - -static int __orinoco_up(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int err; - - netif_carrier_off(dev); /* just to make sure */ - - err = __orinoco_commit(priv); - if (err) { - printk(KERN_ERR "%s: Error %d configuring card\n", - dev->name, err); - return err; - } - - /* Fire things up again */ - hermes_set_irqmask(hw, ORINOCO_INTEN); - err = hermes_enable_port(hw, 0); - if (err) { - printk(KERN_ERR "%s: Error %d enabling MAC port\n", - dev->name, err); - return err; - } - - netif_start_queue(dev); - - return 0; -} - -static int __orinoco_down(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int err; - - netif_stop_queue(dev); - - if (!priv->hw_unavailable) { - if (!priv->broken_disableport) { - err = hermes_disable_port(hw, 0); - if (err) { - /* Some firmwares (e.g. Intersil 1.3.x) seem - * to have problems disabling the port, oh - * well, too bad. */ - printk(KERN_WARNING "%s: Error %d disabling MAC port\n", - dev->name, err); - priv->broken_disableport = 1; - } - } - hermes_set_irqmask(hw, 0); - hermes_write_regn(hw, EVACK, 0xffff); - } - - orinoco_scan_done(priv, true); - - /* firmware will have to reassociate */ - netif_carrier_off(dev); - priv->last_linkstatus = 0xffff; - - return 0; -} - -static int orinoco_reinit_firmware(struct orinoco_private *priv) -{ - struct hermes *hw = &priv->hw; - int err; - - err = hw->ops->init(hw); - if (priv->do_fw_download && !err) { - err = orinoco_download(priv); - if (err) - priv->do_fw_download = 0; - } - if (!err) - err = orinoco_hw_allocate_fid(priv); - - return err; -} - -static int -__orinoco_set_multicast_list(struct net_device *dev) -{ - struct orinoco_private *priv = ndev_priv(dev); - int err = 0; - int promisc, mc_count; - - /* The Hermes doesn't seem to have an allmulti mode, so we go - * into promiscuous mode and let the upper levels deal. */ - if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || - (netdev_mc_count(dev) > MAX_MULTICAST(priv))) { - promisc = 1; - mc_count = 0; - } else { - promisc = 0; - mc_count = netdev_mc_count(dev); - } - - err = __orinoco_hw_set_multicast_list(priv, dev, mc_count, promisc); - - return err; -} - -/* This must be called from user context, without locks held - use - * schedule_work() */ -void orinoco_reset(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, reset_work); - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int err; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - /* When the hardware becomes available again, whatever - * detects that is responsible for re-initializing - * it. So no need for anything further */ - return; - - netif_stop_queue(dev); - - /* Shut off interrupts. Depending on what state the hardware - * is in, this might not work, but we'll try anyway */ - hermes_set_irqmask(hw, 0); - hermes_write_regn(hw, EVACK, 0xffff); - - priv->hw_unavailable++; - priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ - netif_carrier_off(dev); - - orinoco_unlock(priv, &flags); - - /* Scanning support: Notify scan cancellation */ - orinoco_scan_done(priv, true); - - if (priv->hard_reset) { - err = (*priv->hard_reset)(priv); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d " - "performing hard reset\n", dev->name, err); - goto disable; - } - } - - err = orinoco_reinit_firmware(priv); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", - dev->name, err); - goto disable; - } - - /* This has to be called from user context */ - orinoco_lock_irq(priv); - - priv->hw_unavailable--; - - /* priv->open or priv->hw_unavailable might have changed while - * we dropped the lock */ - if (priv->open && (!priv->hw_unavailable)) { - err = __orinoco_up(priv); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", - dev->name, err); - } else - netif_trans_update(dev); - } - - orinoco_unlock_irq(priv); - - return; - disable: - hermes_set_irqmask(hw, 0); - netif_device_detach(dev); - printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); -} - -static int __orinoco_commit(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - int err = 0; - - /* If we've called commit, we are reconfiguring or bringing the - * interface up. Maintaining countermeasures across this would - * be confusing, so note that we've disabled them. The port will - * be enabled later in orinoco_commit or __orinoco_up. */ - priv->tkip_cm_active = 0; - - err = orinoco_hw_program_rids(priv); - - /* FIXME: what about netif_tx_lock */ - (void) __orinoco_set_multicast_list(dev); - - return err; -} - -/* Ensures configuration changes are applied. May result in a reset. - * The caller should hold priv->lock - */ -int orinoco_commit(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int err; - - if (priv->broken_disableport) { - schedule_work(&priv->reset_work); - return 0; - } - - err = hermes_disable_port(hw, 0); - if (err) { - printk(KERN_WARNING "%s: Unable to disable port " - "while reconfiguring card\n", dev->name); - priv->broken_disableport = 1; - goto out; - } - - err = __orinoco_commit(priv); - if (err) { - printk(KERN_WARNING "%s: Unable to reconfigure card\n", - dev->name); - goto out; - } - - err = hermes_enable_port(hw, 0); - if (err) { - printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", - dev->name); - goto out; - } - - out: - if (err) { - printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); - schedule_work(&priv->reset_work); - err = 0; - } - return err; -} - -/********************************************************************/ -/* Interrupt handler */ -/********************************************************************/ - -static void __orinoco_ev_tick(struct net_device *dev, struct hermes *hw) -{ - printk(KERN_DEBUG "%s: TICK\n", dev->name); -} - -static void __orinoco_ev_wterr(struct net_device *dev, struct hermes *hw) -{ - /* This seems to happen a fair bit under load, but ignoring it - seems to work fine...*/ - printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", - dev->name); -} - -irqreturn_t orinoco_interrupt(int irq, void *dev_id) -{ - struct orinoco_private *priv = dev_id; - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int count = MAX_IRQLOOPS_PER_IRQ; - u16 evstat, events; - /* These are used to detect a runaway interrupt situation. - * - * If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, - * we panic and shut down the hardware - */ - /* jiffies value the last time we were called */ - static int last_irq_jiffy; /* = 0 */ - static int loops_this_jiffy; /* = 0 */ - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) { - /* If hw is unavailable - we don't know if the irq was - * for us or not */ - return IRQ_HANDLED; - } - - evstat = hermes_read_regn(hw, EVSTAT); - events = evstat & hw->inten; - if (!events) { - orinoco_unlock(priv, &flags); - return IRQ_NONE; - } - - if (jiffies != last_irq_jiffy) - loops_this_jiffy = 0; - last_irq_jiffy = jiffies; - - while (events && count--) { - if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { - printk(KERN_WARNING "%s: IRQ handler is looping too " - "much! Resetting.\n", dev->name); - /* Disable interrupts for now */ - hermes_set_irqmask(hw, 0); - schedule_work(&priv->reset_work); - break; - } - - /* Check the card hasn't been removed */ - if (!hermes_present(hw)) { - DEBUG(0, "orinoco_interrupt(): card removed\n"); - break; - } - - if (events & HERMES_EV_TICK) - __orinoco_ev_tick(dev, hw); - if (events & HERMES_EV_WTERR) - __orinoco_ev_wterr(dev, hw); - if (events & HERMES_EV_INFDROP) - __orinoco_ev_infdrop(dev, hw); - if (events & HERMES_EV_INFO) - __orinoco_ev_info(dev, hw); - if (events & HERMES_EV_RX) - __orinoco_ev_rx(dev, hw); - if (events & HERMES_EV_TXEXC) - __orinoco_ev_txexc(dev, hw); - if (events & HERMES_EV_TX) - __orinoco_ev_tx(dev, hw); - if (events & HERMES_EV_ALLOC) - __orinoco_ev_alloc(dev, hw); - - hermes_write_regn(hw, EVACK, evstat); - - evstat = hermes_read_regn(hw, EVSTAT); - events = evstat & hw->inten; - } - - orinoco_unlock(priv, &flags); - return IRQ_HANDLED; -} -EXPORT_SYMBOL(orinoco_interrupt); - -/********************************************************************/ -/* Power management */ -/********************************************************************/ -#if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT) -static int orinoco_pm_notifier(struct notifier_block *notifier, - unsigned long pm_event, - void *unused) -{ - struct orinoco_private *priv = container_of(notifier, - struct orinoco_private, - pm_notifier); - - /* All we need to do is cache the firmware before suspend, and - * release it when we come out. - * - * Only need to do this if we're downloading firmware. */ - if (!priv->do_fw_download) - return NOTIFY_DONE; - - switch (pm_event) { - case PM_HIBERNATION_PREPARE: - case PM_SUSPEND_PREPARE: - orinoco_cache_fw(priv, 0); - break; - - case PM_POST_RESTORE: - /* Restore from hibernation failed. We need to clean - * up in exactly the same way, so fall through. */ - case PM_POST_HIBERNATION: - case PM_POST_SUSPEND: - orinoco_uncache_fw(priv); - break; - - case PM_RESTORE_PREPARE: - default: - break; - } - - return NOTIFY_DONE; -} - -static void orinoco_register_pm_notifier(struct orinoco_private *priv) -{ - priv->pm_notifier.notifier_call = orinoco_pm_notifier; - register_pm_notifier(&priv->pm_notifier); -} - -static void orinoco_unregister_pm_notifier(struct orinoco_private *priv) -{ - unregister_pm_notifier(&priv->pm_notifier); -} -#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */ -#define orinoco_register_pm_notifier(priv) do { } while (0) -#define orinoco_unregister_pm_notifier(priv) do { } while (0) -#endif - -/********************************************************************/ -/* Initialization */ -/********************************************************************/ - -int orinoco_init(struct orinoco_private *priv) -{ - struct device *dev = priv->dev; - struct wiphy *wiphy = priv_to_wiphy(priv); - struct hermes *hw = &priv->hw; - int err = 0; - - /* No need to lock, the hw_unavailable flag is already set in - * alloc_orinocodev() */ - priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN; - - /* Initialize the firmware */ - err = hw->ops->init(hw); - if (err != 0) { - dev_err(dev, "Failed to initialize firmware (err = %d)\n", - err); - goto out; - } - - err = determine_fw_capabilities(priv, wiphy->fw_version, - sizeof(wiphy->fw_version), - &wiphy->hw_version); - if (err != 0) { - dev_err(dev, "Incompatible firmware, aborting\n"); - goto out; - } - - if (priv->do_fw_download) { -#ifdef CONFIG_HERMES_CACHE_FW_ON_INIT - orinoco_cache_fw(priv, 0); -#endif - - err = orinoco_download(priv); - if (err) - priv->do_fw_download = 0; - - /* Check firmware version again */ - err = determine_fw_capabilities(priv, wiphy->fw_version, - sizeof(wiphy->fw_version), - &wiphy->hw_version); - if (err != 0) { - dev_err(dev, "Incompatible firmware, aborting\n"); - goto out; - } - } - - if (priv->has_port3) - dev_info(dev, "Ad-hoc demo mode supported\n"); - if (priv->has_ibss) - dev_info(dev, "IEEE standard IBSS ad-hoc mode supported\n"); - if (priv->has_wep) - dev_info(dev, "WEP supported, %s-bit key\n", - priv->has_big_wep ? "104" : "40"); - if (priv->has_wpa) { - dev_info(dev, "WPA-PSK supported\n"); - if (orinoco_mic_init(priv)) { - dev_err(dev, "Failed to setup MIC crypto algorithm. " - "Disabling WPA support\n"); - priv->has_wpa = 0; - } - } - - err = orinoco_hw_read_card_settings(priv, wiphy->perm_addr); - if (err) - goto out; - - err = orinoco_hw_allocate_fid(priv); - if (err) { - dev_err(dev, "Failed to allocate NIC buffer!\n"); - goto out; - } - - /* Set up the default configuration */ - priv->iw_mode = NL80211_IFTYPE_STATION; - /* By default use IEEE/IBSS ad-hoc mode if we have it */ - priv->prefer_port3 = priv->has_port3 && (!priv->has_ibss); - set_port_type(priv); - priv->channel = 0; /* use firmware default */ - - priv->promiscuous = 0; - priv->encode_alg = ORINOCO_ALG_NONE; - priv->tx_key = 0; - priv->wpa_enabled = 0; - priv->tkip_cm_active = 0; - priv->key_mgmt = 0; - priv->wpa_ie_len = 0; - priv->wpa_ie = NULL; - - if (orinoco_wiphy_register(wiphy)) { - err = -ENODEV; - goto out; - } - - /* Make the hardware available, as long as it hasn't been - * removed elsewhere (e.g. by PCMCIA hot unplug) */ - orinoco_lock_irq(priv); - priv->hw_unavailable--; - orinoco_unlock_irq(priv); - - dev_dbg(dev, "Ready\n"); - - out: - return err; -} -EXPORT_SYMBOL(orinoco_init); - -static const struct net_device_ops orinoco_netdev_ops = { - .ndo_open = orinoco_open, - .ndo_stop = orinoco_stop, - .ndo_start_xmit = orinoco_xmit, - .ndo_set_rx_mode = orinoco_set_multicast_list, - .ndo_change_mtu = orinoco_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, - .ndo_tx_timeout = orinoco_tx_timeout, -}; - -/* Allocate private data. - * - * This driver has a number of structures associated with it - * netdev - Net device structure for each network interface - * wiphy - structure associated with wireless phy - * wireless_dev (wdev) - structure for each wireless interface - * hw - structure for hermes chip info - * card - card specific structure for use by the card driver - * (airport, orinoco_cs) - * priv - orinoco private data - * device - generic linux device structure - * - * +---------+ +---------+ - * | wiphy | | netdev | - * | +-------+ | +-------+ - * | | priv | | | wdev | - * | | +-----+ +-+-------+ - * | | | hw | - * | +-+-----+ - * | | card | - * +-+-------+ - * - * priv has a link to netdev and device - * wdev has a link to wiphy - */ -struct orinoco_private -*alloc_orinocodev(int sizeof_card, - struct device *device, - int (*hard_reset)(struct orinoco_private *), - int (*stop_fw)(struct orinoco_private *, int)) -{ - struct orinoco_private *priv; - struct wiphy *wiphy; - - /* allocate wiphy - * NOTE: We only support a single virtual interface - * but this may change when monitor mode is added - */ - wiphy = wiphy_new(&orinoco_cfg_ops, - sizeof(struct orinoco_private) + sizeof_card); - if (!wiphy) - return NULL; - - priv = wiphy_priv(wiphy); - priv->dev = device; - - if (sizeof_card) - priv->card = (void *)((unsigned long)priv - + sizeof(struct orinoco_private)); - else - priv->card = NULL; - - orinoco_wiphy_init(wiphy); - -#ifdef WIRELESS_SPY - priv->wireless_data.spy_data = &priv->spy_data; -#endif - - /* Set up default callbacks */ - priv->hard_reset = hard_reset; - priv->stop_fw = stop_fw; - - spin_lock_init(&priv->lock); - priv->open = 0; - priv->hw_unavailable = 1; /* orinoco_init() must clear this - * before anything else touches the - * hardware */ - INIT_WORK(&priv->reset_work, orinoco_reset); - INIT_WORK(&priv->join_work, orinoco_join_ap); - INIT_WORK(&priv->wevent_work, orinoco_send_wevents); - - INIT_LIST_HEAD(&priv->rx_list); - tasklet_setup(&priv->rx_tasklet, orinoco_rx_isr_tasklet); - - spin_lock_init(&priv->scan_lock); - INIT_LIST_HEAD(&priv->scan_list); - INIT_WORK(&priv->process_scan, orinoco_process_scan_results); - - priv->last_linkstatus = 0xffff; - -#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) - priv->cached_pri_fw = NULL; - priv->cached_fw = NULL; -#endif - - /* Register PM notifiers */ - orinoco_register_pm_notifier(priv); - - return priv; -} -EXPORT_SYMBOL(alloc_orinocodev); - -/* We can only support a single interface. We provide a separate - * function to set it up to distinguish between hardware - * initialisation and interface setup. - * - * The base_addr and irq parameters are passed on to netdev for use - * with SIOCGIFMAP. - */ -int orinoco_if_add(struct orinoco_private *priv, - unsigned long base_addr, - unsigned int irq, - const struct net_device_ops *ops) -{ - struct wiphy *wiphy = priv_to_wiphy(priv); - struct wireless_dev *wdev; - struct net_device *dev; - int ret; - - dev = alloc_etherdev(sizeof(struct wireless_dev)); - - if (!dev) - return -ENOMEM; - - /* Initialise wireless_dev */ - wdev = netdev_priv(dev); - wdev->wiphy = wiphy; - wdev->iftype = NL80211_IFTYPE_STATION; - - /* Setup / override net_device fields */ - dev->ieee80211_ptr = wdev; - dev->watchdog_timeo = HZ; /* 1 second timeout */ - dev->wireless_handlers = &orinoco_handler_def; -#ifdef WIRELESS_SPY - dev->wireless_data = &priv->wireless_data; -#endif - /* Default to standard ops if not set */ - if (ops) - dev->netdev_ops = ops; - else - dev->netdev_ops = &orinoco_netdev_ops; - - /* we use the default eth_mac_addr for setting the MAC addr */ - - /* Reserve space in skb for the SNAP header */ - dev->needed_headroom = ENCAPS_OVERHEAD; - - netif_carrier_off(dev); - - eth_hw_addr_set(dev, wiphy->perm_addr); - - dev->base_addr = base_addr; - dev->irq = irq; - - dev->min_mtu = ORINOCO_MIN_MTU; - dev->max_mtu = ORINOCO_MAX_MTU; - - SET_NETDEV_DEV(dev, priv->dev); - ret = register_netdev(dev); - if (ret) - goto fail; - - priv->ndev = dev; - - /* Report what we've done */ - dev_dbg(priv->dev, "Registered interface %s.\n", dev->name); - - return 0; - - fail: - free_netdev(dev); - return ret; -} -EXPORT_SYMBOL(orinoco_if_add); - -void orinoco_if_del(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - - unregister_netdev(dev); - free_netdev(dev); -} -EXPORT_SYMBOL(orinoco_if_del); - -void free_orinocodev(struct orinoco_private *priv) -{ - struct wiphy *wiphy = priv_to_wiphy(priv); - struct orinoco_rx_data *rx_data, *temp; - struct orinoco_scan_data *sd, *sdtemp; - - /* If the tasklet is scheduled when we call tasklet_kill it - * will run one final time. However the tasklet will only - * drain priv->rx_list if the hw is still available. */ - tasklet_kill(&priv->rx_tasklet); - - /* Explicitly drain priv->rx_list */ - list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { - list_del(&rx_data->list); - - dev_kfree_skb(rx_data->skb); - kfree(rx_data->desc); - kfree(rx_data); - } - - cancel_work_sync(&priv->process_scan); - /* Explicitly drain priv->scan_list */ - list_for_each_entry_safe(sd, sdtemp, &priv->scan_list, list) { - list_del(&sd->list); - - if (sd->len > 0) - kfree(sd->buf); - kfree(sd); - } - - orinoco_unregister_pm_notifier(priv); - orinoco_uncache_fw(priv); - - priv->wpa_ie_len = 0; - kfree(priv->wpa_ie); - orinoco_mic_free(priv); - wiphy_free(wiphy); -} -EXPORT_SYMBOL(free_orinocodev); - -int orinoco_up(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - unsigned long flags; - int err; - - priv->hw.ops->lock_irqsave(&priv->lock, &flags); - - err = orinoco_reinit_firmware(priv); - if (err) { - printk(KERN_ERR "%s: Error %d re-initializing firmware\n", - dev->name, err); - goto exit; - } - - netif_device_attach(dev); - priv->hw_unavailable--; - - if (priv->open && !priv->hw_unavailable) { - err = __orinoco_up(priv); - if (err) - printk(KERN_ERR "%s: Error %d restarting card\n", - dev->name, err); - } - -exit: - priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); - - return 0; -} -EXPORT_SYMBOL(orinoco_up); - -void orinoco_down(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - unsigned long flags; - int err; - - priv->hw.ops->lock_irqsave(&priv->lock, &flags); - err = __orinoco_down(priv); - if (err) - printk(KERN_WARNING "%s: Error %d downing interface\n", - dev->name, err); - - netif_device_detach(dev); - priv->hw_unavailable++; - priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); -} -EXPORT_SYMBOL(orinoco_down); - -/********************************************************************/ -/* Module initialization */ -/********************************************************************/ - -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson <hermes@gibson.dropbear.id.au>, " - "Pavel Roskin <proski@gnu.org>, et al)"; - -static int __init init_orinoco(void) -{ - printk(KERN_DEBUG "%s\n", version); - return 0; -} - -static void __exit exit_orinoco(void) -{ -} - -module_init(init_orinoco); -module_exit(exit_orinoco); diff --git a/drivers/net/wireless/intersil/orinoco/main.h b/drivers/net/wireless/intersil/orinoco/main.h deleted file mode 100644 index 5a8fec2613..0000000000 --- a/drivers/net/wireless/intersil/orinoco/main.h +++ /dev/null @@ -1,50 +0,0 @@ -/* Exports from main to helper modules - * - * See copyright notice in main.c - */ -#ifndef _ORINOCO_MAIN_H_ -#define _ORINOCO_MAIN_H_ - -#include <linux/ieee80211.h> -#include "orinoco.h" - -/********************************************************************/ -/* Compile time configuration and compatibility stuff */ -/********************************************************************/ - -/* We do this this way to avoid ifdefs in the actual code */ -#ifdef WIRELESS_SPY -#define SPY_NUMBER(priv) (priv->spy_data.spy_number) -#else -#define SPY_NUMBER(priv) 0 -#endif /* WIRELESS_SPY */ - -/********************************************************************/ - -/* Export module parameter */ -extern int force_monitor; - -/* Forward declarations */ -struct net_device; -struct work_struct; - -void set_port_type(struct orinoco_private *priv); -int orinoco_commit(struct orinoco_private *priv); -void orinoco_reset(struct work_struct *work); - -/* Information element helpers - find a home for these... */ -#define WPA_OUI_TYPE "\x00\x50\xF2\x01" -#define WPA_SELECTOR_LEN 4 -static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len) -{ - u8 *p = data; - while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) { - if ((p[0] == WLAN_EID_VENDOR_SPECIFIC) && - (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0)) - return p; - p += p[1] + 2; - } - return NULL; -} - -#endif /* _ORINOCO_MAIN_H_ */ diff --git a/drivers/net/wireless/intersil/orinoco/mic.c b/drivers/net/wireless/intersil/orinoco/mic.c deleted file mode 100644 index a324bc4b79..0000000000 --- a/drivers/net/wireless/intersil/orinoco/mic.c +++ /dev/null @@ -1,89 +0,0 @@ -/* Orinoco MIC helpers - * - * See copyright notice in main.c - */ -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/if_ether.h> -#include <linux/scatterlist.h> -#include <crypto/hash.h> - -#include "orinoco.h" -#include "mic.h" - -/********************************************************************/ -/* Michael MIC crypto setup */ -/********************************************************************/ -int orinoco_mic_init(struct orinoco_private *priv) -{ - priv->tx_tfm_mic = crypto_alloc_shash("michael_mic", 0, 0); - if (IS_ERR(priv->tx_tfm_mic)) { - printk(KERN_DEBUG "%s: could not allocate " - "crypto API michael_mic\n", __func__); - priv->tx_tfm_mic = NULL; - return -ENOMEM; - } - - priv->rx_tfm_mic = crypto_alloc_shash("michael_mic", 0, 0); - if (IS_ERR(priv->rx_tfm_mic)) { - printk(KERN_DEBUG "%s: could not allocate " - "crypto API michael_mic\n", __func__); - priv->rx_tfm_mic = NULL; - return -ENOMEM; - } - - return 0; -} - -void orinoco_mic_free(struct orinoco_private *priv) -{ - if (priv->tx_tfm_mic) - crypto_free_shash(priv->tx_tfm_mic); - if (priv->rx_tfm_mic) - crypto_free_shash(priv->rx_tfm_mic); -} - -int orinoco_mic(struct crypto_shash *tfm_michael, u8 *key, - u8 *da, u8 *sa, u8 priority, - u8 *data, size_t data_len, u8 *mic) -{ - SHASH_DESC_ON_STACK(desc, tfm_michael); - u8 hdr[ETH_HLEN + 2]; /* size of header + padding */ - int err; - - if (tfm_michael == NULL) { - printk(KERN_WARNING "%s: tfm_michael == NULL\n", __func__); - return -1; - } - - /* Copy header into buffer. We need the padding on the end zeroed */ - memcpy(&hdr[0], da, ETH_ALEN); - memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN); - hdr[ETH_ALEN * 2] = priority; - hdr[ETH_ALEN * 2 + 1] = 0; - hdr[ETH_ALEN * 2 + 2] = 0; - hdr[ETH_ALEN * 2 + 3] = 0; - - desc->tfm = tfm_michael; - - err = crypto_shash_setkey(tfm_michael, key, MIC_KEYLEN); - if (err) - return err; - - err = crypto_shash_init(desc); - if (err) - return err; - - err = crypto_shash_update(desc, hdr, sizeof(hdr)); - if (err) - return err; - - err = crypto_shash_update(desc, data, data_len); - if (err) - return err; - - err = crypto_shash_final(desc, mic); - shash_desc_zero(desc); - - return err; -} diff --git a/drivers/net/wireless/intersil/orinoco/mic.h b/drivers/net/wireless/intersil/orinoco/mic.h deleted file mode 100644 index e8724e8892..0000000000 --- a/drivers/net/wireless/intersil/orinoco/mic.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Orinoco MIC helpers - * - * See copyright notice in main.c - */ -#ifndef _ORINOCO_MIC_H_ -#define _ORINOCO_MIC_H_ - -#include <linux/types.h> -#include <crypto/hash.h> - -#define MICHAEL_MIC_LEN 8 - -/* Forward declarations */ -struct orinoco_private; -struct crypto_ahash; - -int orinoco_mic_init(struct orinoco_private *priv); -void orinoco_mic_free(struct orinoco_private *priv); -int orinoco_mic(struct crypto_shash *tfm_michael, u8 *key, - u8 *da, u8 *sa, u8 priority, - u8 *data, size_t data_len, u8 *mic); - -#endif /* ORINOCO_MIC_H */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco.h b/drivers/net/wireless/intersil/orinoco/orinoco.h deleted file mode 100644 index cdd026af10..0000000000 --- a/drivers/net/wireless/intersil/orinoco/orinoco.h +++ /dev/null @@ -1,251 +0,0 @@ -/* orinoco.h - * - * Common definitions to all pieces of the various orinoco - * drivers - */ - -#ifndef _ORINOCO_H -#define _ORINOCO_H - -#define DRIVER_VERSION "0.15" - -#include <linux/interrupt.h> -#include <linux/suspend.h> -#include <linux/netdevice.h> -#include <linux/wireless.h> -#include <net/iw_handler.h> -#include <net/cfg80211.h> - -#include "hermes.h" - -/* To enable debug messages */ -/*#define ORINOCO_DEBUG 3*/ - -#define WIRELESS_SPY /* enable iwspy support */ - -#define MAX_SCAN_LEN 4096 - -#define ORINOCO_SEQ_LEN 8 -#define ORINOCO_MAX_KEY_SIZE 14 -#define ORINOCO_MAX_KEYS 4 - -struct orinoco_key { - __le16 len; /* always stored as little-endian */ - char data[ORINOCO_MAX_KEY_SIZE]; -} __packed; - -#define TKIP_KEYLEN 16 -#define MIC_KEYLEN 8 - -struct orinoco_tkip_key { - u8 tkip[TKIP_KEYLEN]; - u8 tx_mic[MIC_KEYLEN]; - u8 rx_mic[MIC_KEYLEN]; -}; - -enum orinoco_alg { - ORINOCO_ALG_NONE, - ORINOCO_ALG_WEP, - ORINOCO_ALG_TKIP -}; - -enum fwtype { - FIRMWARE_TYPE_AGERE, - FIRMWARE_TYPE_INTERSIL, - FIRMWARE_TYPE_SYMBOL -}; - -struct firmware; - -struct orinoco_private { - void *card; /* Pointer to card dependent structure */ - struct device *dev; - int (*hard_reset)(struct orinoco_private *); - int (*stop_fw)(struct orinoco_private *, int); - - struct ieee80211_supported_band band; - struct ieee80211_channel channels[14]; - u32 cipher_suites[3]; - - /* Synchronisation stuff */ - spinlock_t lock; - int hw_unavailable; - struct work_struct reset_work; - - /* Interrupt tasklets */ - struct tasklet_struct rx_tasklet; - struct list_head rx_list; - - /* driver state */ - int open; - u16 last_linkstatus; - struct work_struct join_work; - struct work_struct wevent_work; - - /* Net device stuff */ - struct net_device *ndev; - struct iw_statistics wstats; - - /* Hardware control variables */ - struct hermes hw; - u16 txfid; - - /* Capabilities of the hardware/firmware */ - enum fwtype firmware_type; - int ibss_port; - int nicbuf_size; - u16 channel_mask; - - /* Boolean capabilities */ - unsigned int has_ibss:1; - unsigned int has_port3:1; - unsigned int has_wep:1; - unsigned int has_big_wep:1; - unsigned int has_mwo:1; - unsigned int has_pm:1; - unsigned int has_preamble:1; - unsigned int has_sensitivity:1; - unsigned int has_hostscan:1; - unsigned int has_alt_txcntl:1; - unsigned int has_ext_scan:1; - unsigned int has_wpa:1; - unsigned int do_fw_download:1; - unsigned int broken_disableport:1; - unsigned int broken_monitor:1; - unsigned int prefer_port3:1; - - /* Configuration paramaters */ - enum nl80211_iftype iw_mode; - enum orinoco_alg encode_alg; - u16 wep_restrict, tx_key; - struct key_params keys[ORINOCO_MAX_KEYS]; - - int bitratemode; - char nick[IW_ESSID_MAX_SIZE + 1]; - char desired_essid[IW_ESSID_MAX_SIZE + 1]; - char desired_bssid[ETH_ALEN]; - int bssid_fixed; - u16 frag_thresh, mwo_robust; - u16 channel; - u16 ap_density, rts_thresh; - u16 pm_on, pm_mcast, pm_period, pm_timeout; - u16 preamble; - u16 short_retry_limit, long_retry_limit; - u16 retry_lifetime; -#ifdef WIRELESS_SPY - struct iw_spy_data spy_data; /* iwspy support */ - struct iw_public_data wireless_data; -#endif - - /* Configuration dependent variables */ - int port_type, createibss; - int promiscuous, mc_count; - - /* Scanning support */ - struct cfg80211_scan_request *scan_request; - struct work_struct process_scan; - struct list_head scan_list; - spinlock_t scan_lock; /* protects the scan list */ - - /* WPA support */ - u8 *wpa_ie; - int wpa_ie_len; - - struct crypto_shash *rx_tfm_mic; - struct crypto_shash *tx_tfm_mic; - - unsigned int wpa_enabled:1; - unsigned int tkip_cm_active:1; - unsigned int key_mgmt:3; - -#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) - /* Cached in memory firmware to use during ->resume. */ - const struct firmware *cached_pri_fw; - const struct firmware *cached_fw; -#endif - - struct notifier_block pm_notifier; -}; - -#ifdef ORINOCO_DEBUG -extern int orinoco_debug; -#define DEBUG(n, args...) do { \ - if (orinoco_debug > (n)) \ - printk(KERN_DEBUG args); \ -} while (0) -#else -#define DEBUG(n, args...) do { } while (0) -#endif /* ORINOCO_DEBUG */ - -/********************************************************************/ -/* Exported prototypes */ -/********************************************************************/ - -struct orinoco_private *alloc_orinocodev(int sizeof_card, struct device *device, - int (*hard_reset)(struct orinoco_private *), - int (*stop_fw)(struct orinoco_private *, int)); -void free_orinocodev(struct orinoco_private *priv); -int orinoco_init(struct orinoco_private *priv); -int orinoco_if_add(struct orinoco_private *priv, unsigned long base_addr, - unsigned int irq, const struct net_device_ops *ops); -void orinoco_if_del(struct orinoco_private *priv); -int orinoco_up(struct orinoco_private *priv); -void orinoco_down(struct orinoco_private *priv); -irqreturn_t orinoco_interrupt(int irq, void *dev_id); - -void __orinoco_ev_info(struct net_device *dev, struct hermes *hw); -void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw); - -int orinoco_process_xmit_skb(struct sk_buff *skb, - struct net_device *dev, - struct orinoco_private *priv, - int *tx_control, - u8 *mic); - -/* Common ndo functions exported for reuse by orinoco_usb */ -int orinoco_open(struct net_device *dev); -int orinoco_stop(struct net_device *dev); -void orinoco_set_multicast_list(struct net_device *dev); -int orinoco_change_mtu(struct net_device *dev, int new_mtu); -void orinoco_tx_timeout(struct net_device *dev, unsigned int txqueue); - -/********************************************************************/ -/* Locking and synchronization functions */ -/********************************************************************/ - -static inline int orinoco_lock(struct orinoco_private *priv, - unsigned long *flags) -{ - priv->hw.ops->lock_irqsave(&priv->lock, flags); - if (priv->hw_unavailable) { - DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n", - priv->ndev); - priv->hw.ops->unlock_irqrestore(&priv->lock, flags); - return -EBUSY; - } - return 0; -} - -static inline void orinoco_unlock(struct orinoco_private *priv, - unsigned long *flags) -{ - priv->hw.ops->unlock_irqrestore(&priv->lock, flags); -} - -static inline void orinoco_lock_irq(struct orinoco_private *priv) -{ - priv->hw.ops->lock_irq(&priv->lock); -} - -static inline void orinoco_unlock_irq(struct orinoco_private *priv) -{ - priv->hw.ops->unlock_irq(&priv->lock); -} - -/*** Navigate from net_device to orinoco_private ***/ -static inline struct orinoco_private *ndev_priv(struct net_device *dev) -{ - struct wireless_dev *wdev = netdev_priv(dev); - return wdev_priv(wdev); -} -#endif /* _ORINOCO_H */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_cs.c b/drivers/net/wireless/intersil/orinoco/orinoco_cs.c deleted file mode 100644 index 03bfd24826..0000000000 --- a/drivers/net/wireless/intersil/orinoco/orinoco_cs.c +++ /dev/null @@ -1,350 +0,0 @@ -/* orinoco_cs.c (formerly known as dldwd_cs.c) - * - * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such - * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ - * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). - * It should also be usable on various Prism II based cards such as the - * Linksys, D-Link and Farallon Skyline. It should also work on Symbol - * cards such as the 3Com AirConnect and Ericsson WLAN. - * - * Copyright notice & release notes in file main.c - */ - -#define DRIVER_NAME "orinoco_cs" -#define PFX DRIVER_NAME ": " - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/cisreg.h> -#include <pcmcia/ds.h> - -#include "orinoco.h" - -/********************************************************************/ -/* Module stuff */ -/********************************************************************/ - -MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>"); -MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco," - " Prism II based and similar wireless cards"); -MODULE_LICENSE("Dual MPL/GPL"); - -/* Module parameters */ - -/* Some D-Link cards have buggy CIS. They do work at 5v properly, but - * don't have any CIS entry for it. This workaround it... */ -static int ignore_cis_vcc; /* = 0 */ -module_param(ignore_cis_vcc, int, 0); -MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); - -/********************************************************************/ -/* Data structures */ -/********************************************************************/ - -/* PCMCIA specific device information (goes in the card field of - * struct orinoco_private */ -struct orinoco_pccard { - struct pcmcia_device *p_dev; - - /* Used to handle hard reset */ - /* yuck, we need this hack to work around the insanity of the - * PCMCIA layer */ - unsigned long hard_reset_in_progress; -}; - - -/********************************************************************/ -/* Function prototypes */ -/********************************************************************/ - -static int orinoco_cs_config(struct pcmcia_device *link); -static void orinoco_cs_release(struct pcmcia_device *link); -static void orinoco_cs_detach(struct pcmcia_device *p_dev); - -/********************************************************************/ -/* Device methods */ -/********************************************************************/ - -static int -orinoco_cs_hard_reset(struct orinoco_private *priv) -{ - struct orinoco_pccard *card = priv->card; - struct pcmcia_device *link = card->p_dev; - int err; - - /* We need atomic ops here, because we're not holding the lock */ - set_bit(0, &card->hard_reset_in_progress); - - err = pcmcia_reset_card(link->socket); - if (err) - return err; - - msleep(100); - clear_bit(0, &card->hard_reset_in_progress); - - return 0; -} - -/********************************************************************/ -/* PCMCIA stuff */ -/********************************************************************/ - -static int -orinoco_cs_probe(struct pcmcia_device *link) -{ - struct orinoco_private *priv; - struct orinoco_pccard *card; - int ret; - - priv = alloc_orinocodev(sizeof(*card), &link->dev, - orinoco_cs_hard_reset, NULL); - if (!priv) - return -ENOMEM; - card = priv->card; - - /* Link both structures together */ - card->p_dev = link; - link->priv = priv; - - ret = orinoco_cs_config(link); - if (ret) - goto err_free_orinocodev; - - return 0; - -err_free_orinocodev: - free_orinocodev(priv); - return ret; -} - -static void orinoco_cs_detach(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - - orinoco_if_del(priv); - - orinoco_cs_release(link); - - wiphy_unregister(priv_to_wiphy(priv)); - free_orinocodev(priv); -} /* orinoco_cs_detach */ - -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) -{ - if (p_dev->config_index == 0) - return -EINVAL; - - return pcmcia_request_io(p_dev); -}; - -static int -orinoco_cs_config(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - struct hermes *hw = &priv->hw; - int ret; - void __iomem *mem; - - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | - CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; - if (ignore_cis_vcc) - link->config_flags &= ~CONF_AUTO_CHECK_VCC; - ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); - if (ret) { - if (!ignore_cis_vcc) - printk(KERN_ERR PFX "GetNextTuple(): No matching " - "CIS configuration. Maybe you need the " - "ignore_cis_vcc=1 parameter.\n"); - goto failed; - } - - mem = ioport_map(link->resource[0]->start, - resource_size(link->resource[0])); - if (!mem) - goto failed; - - /* We initialize the hermes structure before completing PCMCIA - * configuration just in case the interrupt handler gets - * called. */ - hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - - ret = pcmcia_request_irq(link, orinoco_interrupt); - if (ret) - goto failed; - - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - /* Initialise the main driver */ - if (orinoco_init(priv) != 0) { - printk(KERN_ERR PFX "orinoco_init() failed\n"); - goto failed; - } - - /* Register an interface with the stack */ - if (orinoco_if_add(priv, link->resource[0]->start, - link->irq, NULL) != 0) { - printk(KERN_ERR PFX "orinoco_if_add() failed\n"); - goto failed; - } - - return 0; - - failed: - orinoco_cs_release(link); - return -ENODEV; -} /* orinoco_cs_config */ - -static void -orinoco_cs_release(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - unsigned long flags; - - /* We're committed to taking the device away now, so mark the - * hardware as unavailable */ - priv->hw.ops->lock_irqsave(&priv->lock, &flags); - priv->hw_unavailable++; - priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); - - pcmcia_disable_device(link); - if (priv->hw.iobase) - ioport_unmap(priv->hw.iobase); -} /* orinoco_cs_release */ - -static int orinoco_cs_suspend(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - struct orinoco_pccard *card = priv->card; - - /* This is probably racy, but I can't think of - a better way, short of rewriting the PCMCIA - layer to not suck :-( */ - if (!test_bit(0, &card->hard_reset_in_progress)) - orinoco_down(priv); - - return 0; -} - -static int orinoco_cs_resume(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - struct orinoco_pccard *card = priv->card; - int err = 0; - - if (!test_bit(0, &card->hard_reset_in_progress)) - err = orinoco_up(priv); - - return err; -} - - -/********************************************************************/ -/* Module initialization */ -/********************************************************************/ - -static const struct pcmcia_device_id orinoco_cs_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ - PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ - PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ - PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */ - PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */ - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */ - PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */ - PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */ - PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), - PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), - PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), - PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), - PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), - PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), - PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), - PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), - PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), - PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), - PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), - PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), - PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), - PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), - PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), - PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), - PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), - PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), - PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), - PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), - PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), - PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), - PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.01", 0xd27deb1a), /* Lucent Orinoco */ -#ifdef CONFIG_HERMES_PRISM - /* Only entries that certainly identify Prism chipset */ - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ - PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ - PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ - PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ - PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ - PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */ - PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */ - PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */ - PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */ - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */ - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */ - PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), - PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), - PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), - PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), - PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), - PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), - PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), - PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), - PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac), - PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab), - PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), - PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), - PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), - PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), - PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), - PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01), - PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1), - PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), - PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), - PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), - PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), - PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757), - PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), - PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), - PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092), - PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2), - PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b), - PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39), - - /* This may be Agere or Intersil Firmware */ - PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), -#endif - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); - -static struct pcmcia_driver orinoco_driver = { - .owner = THIS_MODULE, - .name = DRIVER_NAME, - .probe = orinoco_cs_probe, - .remove = orinoco_cs_detach, - .id_table = orinoco_cs_ids, - .suspend = orinoco_cs_suspend, - .resume = orinoco_cs_resume, -}; -module_pcmcia_driver(orinoco_driver); diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c b/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c deleted file mode 100644 index 18bd0d9876..0000000000 --- a/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c +++ /dev/null @@ -1,314 +0,0 @@ -/* orinoco_nortel.c - * - * Driver for Prism II devices which would usually be driven by orinoco_cs, - * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in - * Nortel emobility, Symbol LA-4113 and Symbol LA-4123. - * - * Copyright (C) 2002 Tobias Hoffmann - * (C) 2003 Christoph Jungegger <disdos@traum404.de> - * - * Some of this code is borrowed from orinoco_plx.c - * Copyright (C) 2001 Daniel Barlow - * Some of this code is borrowed from orinoco_pci.c - * Copyright (C) 2001 Jean Tourrilhes - * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing - * has been copied from it. linux-wlan-ng-0.1.10 is originally : - * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#define DRIVER_NAME "orinoco_nortel" -#define PFX DRIVER_NAME ": " - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <pcmcia/cisreg.h> - -#include "orinoco.h" -#include "orinoco_pci.h" - -#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ -#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ - - -/* - * Do a soft reset of the card using the Configuration Option Register - * We need this to get going... - * This is the part of the code that is strongly inspired from wlan-ng - * - * Note bis : Don't try to access HERMES_CMD during the reset phase. - * It just won't work ! - */ -static int orinoco_nortel_cor_reset(struct orinoco_private *priv) -{ - struct orinoco_pci_card *card = priv->card; - - /* Assert the reset until the card notices */ - iowrite16(8, card->bridge_io + 2); - ioread16(card->attr_io + COR_OFFSET); - iowrite16(0x80, card->attr_io + COR_OFFSET); - mdelay(1); - - /* Give time for the card to recover from this hard effort */ - iowrite16(0, card->attr_io + COR_OFFSET); - iowrite16(0, card->attr_io + COR_OFFSET); - mdelay(1); - - /* Set COR as usual */ - iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); - iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); - mdelay(1); - - iowrite16(0x228, card->bridge_io + 2); - - return 0; -} - -static int orinoco_nortel_hw_init(struct orinoco_pci_card *card) -{ - int i; - u32 reg; - - /* Setup bridge */ - if (ioread16(card->bridge_io) & 1) { - printk(KERN_ERR PFX "brg1 answer1 wrong\n"); - return -EBUSY; - } - iowrite16(0x118, card->bridge_io + 2); - iowrite16(0x108, card->bridge_io + 2); - mdelay(30); - iowrite16(0x8, card->bridge_io + 2); - for (i = 0; i < 30; i++) { - mdelay(30); - if (ioread16(card->bridge_io) & 0x10) - break; - } - if (i == 30) { - printk(KERN_ERR PFX "brg1 timed out\n"); - return -EBUSY; - } - if (ioread16(card->attr_io + COR_OFFSET) & 1) { - printk(KERN_ERR PFX "brg2 answer1 wrong\n"); - return -EBUSY; - } - if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) { - printk(KERN_ERR PFX "brg2 answer2 wrong\n"); - return -EBUSY; - } - if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) { - printk(KERN_ERR PFX "brg2 answer3 wrong\n"); - return -EBUSY; - } - - /* Set the PCMCIA COR register */ - iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); - mdelay(1); - reg = ioread16(card->attr_io + COR_OFFSET); - if (reg != COR_VALUE) { - printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", - reg); - return -EBUSY; - } - - /* Set LEDs */ - iowrite16(1, card->bridge_io + 10); - return 0; -} - -static int orinoco_nortel_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int err; - struct orinoco_private *priv; - struct orinoco_pci_card *card; - void __iomem *hermes_io, *bridge_io, *attr_io; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return err; - } - - err = pci_request_regions(pdev, DRIVER_NAME); - if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); - goto fail_resources; - } - - bridge_io = pci_iomap(pdev, 0, 0); - if (!bridge_io) { - printk(KERN_ERR PFX "Cannot map bridge registers\n"); - err = -EIO; - goto fail_map_bridge; - } - - attr_io = pci_iomap(pdev, 1, 0); - if (!attr_io) { - printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); - err = -EIO; - goto fail_map_attr; - } - - hermes_io = pci_iomap(pdev, 2, 0); - if (!hermes_io) { - printk(KERN_ERR PFX "Cannot map chipset registers\n"); - err = -EIO; - goto fail_map_hermes; - } - - /* Allocate network device */ - priv = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_nortel_cor_reset, NULL); - if (!priv) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - err = -ENOMEM; - goto fail_alloc; - } - - card = priv->card; - card->bridge_io = bridge_io; - card->attr_io = attr_io; - - hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - DRIVER_NAME, priv); - if (err) { - printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); - err = -EBUSY; - goto fail_irq; - } - - err = orinoco_nortel_hw_init(card); - if (err) { - printk(KERN_ERR PFX "Hardware initialization failed\n"); - goto fail; - } - - err = orinoco_nortel_cor_reset(priv); - if (err) { - printk(KERN_ERR PFX "Initial reset failed\n"); - goto fail; - } - - err = orinoco_init(priv); - if (err) { - printk(KERN_ERR PFX "orinoco_init() failed\n"); - goto fail; - } - - err = orinoco_if_add(priv, 0, 0, NULL); - if (err) { - printk(KERN_ERR PFX "orinoco_if_add() failed\n"); - goto fail_wiphy; - } - - pci_set_drvdata(pdev, priv); - - return 0; - - fail_wiphy: - wiphy_unregister(priv_to_wiphy(priv)); - fail: - free_irq(pdev->irq, priv); - - fail_irq: - free_orinocodev(priv); - - fail_alloc: - pci_iounmap(pdev, hermes_io); - - fail_map_hermes: - pci_iounmap(pdev, attr_io); - - fail_map_attr: - pci_iounmap(pdev, bridge_io); - - fail_map_bridge: - pci_release_regions(pdev); - - fail_resources: - pci_disable_device(pdev); - - return err; -} - -static void orinoco_nortel_remove_one(struct pci_dev *pdev) -{ - struct orinoco_private *priv = pci_get_drvdata(pdev); - struct orinoco_pci_card *card = priv->card; - - /* Clear LEDs */ - iowrite16(0, card->bridge_io + 10); - - orinoco_if_del(priv); - wiphy_unregister(priv_to_wiphy(priv)); - free_irq(pdev->irq, priv); - free_orinocodev(priv); - pci_iounmap(pdev, priv->hw.iobase); - pci_iounmap(pdev, card->attr_io); - pci_iounmap(pdev, card->bridge_io); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static const struct pci_device_id orinoco_nortel_id_table[] = { - /* Nortel emobility PCI */ - {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, - /* Symbol LA-4123 PCI */ - {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,}, - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table); - -static struct pci_driver orinoco_nortel_driver = { - .name = DRIVER_NAME, - .id_table = orinoco_nortel_id_table, - .probe = orinoco_nortel_init_one, - .remove = orinoco_nortel_remove_one, - .driver.pm = &orinoco_pci_pm_ops, -}; - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)"; -MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>"); -MODULE_DESCRIPTION("Driver for wireless LAN cards using the Nortel PCI bridge"); -MODULE_LICENSE("Dual MPL/GPL"); - -static int __init orinoco_nortel_init(void) -{ - printk(KERN_DEBUG "%s\n", version); - return pci_register_driver(&orinoco_nortel_driver); -} - -static void __exit orinoco_nortel_exit(void) -{ - pci_unregister_driver(&orinoco_nortel_driver); -} - -module_init(orinoco_nortel_init); -module_exit(orinoco_nortel_exit); diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c b/drivers/net/wireless/intersil/orinoco/orinoco_pci.c deleted file mode 100644 index 7e3a6dd60c..0000000000 --- a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c +++ /dev/null @@ -1,257 +0,0 @@ -/* orinoco_pci.c - * - * Driver for Prism 2.5/3 devices that have a direct PCI interface - * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge). - * The card contains only one PCI region, which contains all the usual - * hermes registers, as well as the COR register. - * - * Current maintainers are: - * Pavel Roskin <proski AT gnu.org> - * and David Gibson <hermes AT gibson.dropbear.id.au> - * - * Some of this code is borrowed from orinoco_plx.c - * Copyright (C) 2001 Daniel Barlow <dan AT telent.net> - * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing - * has been copied from it. linux-wlan-ng-0.1.10 is originally : - * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - * This file originally written by: - * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com> - * And is now maintained by: - * (C) Copyright David Gibson, IBM Corp. 2002-2003. - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#define DRIVER_NAME "orinoco_pci" -#define PFX DRIVER_NAME ": " - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> - -#include "orinoco.h" -#include "orinoco_pci.h" - -/* Offset of the COR register of the PCI card */ -#define HERMES_PCI_COR (0x26) - -/* Bitmask to reset the card */ -#define HERMES_PCI_COR_MASK (0x0080) - -/* Magic timeouts for doing the reset. - * Those times are straight from wlan-ng, and it is claimed that they - * are necessary. Alan will kill me. Take your time and grab a coffee. */ -#define HERMES_PCI_COR_ONT (250) /* ms */ -#define HERMES_PCI_COR_OFFT (500) /* ms */ -#define HERMES_PCI_COR_BUSYT (500) /* ms */ - -/* - * Do a soft reset of the card using the Configuration Option Register - * We need this to get going... - * This is the part of the code that is strongly inspired from wlan-ng - * - * Note : This code is done with irq enabled. This mean that many - * interrupts will occur while we are there. This is why we use the - * jiffies to regulate time instead of a straight mdelay(). Usually we - * need only around 245 iteration of the loop to do 250 ms delay. - * - * Note bis : Don't try to access HERMES_CMD during the reset phase. - * It just won't work ! - */ -static int orinoco_pci_cor_reset(struct orinoco_private *priv) -{ - struct hermes *hw = &priv->hw; - unsigned long timeout; - u16 reg; - - /* Assert the reset until the card notices */ - hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK); - mdelay(HERMES_PCI_COR_ONT); - - /* Give time for the card to recover from this hard effort */ - hermes_write_regn(hw, PCI_COR, 0x0000); - mdelay(HERMES_PCI_COR_OFFT); - - /* The card is ready when it's no longer busy */ - timeout = jiffies + msecs_to_jiffies(HERMES_PCI_COR_BUSYT); - reg = hermes_read_regn(hw, CMD); - while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { - mdelay(1); - reg = hermes_read_regn(hw, CMD); - } - - /* Still busy? */ - if (reg & HERMES_CMD_BUSY) { - printk(KERN_ERR PFX "Busy timeout\n"); - return -ETIMEDOUT; - } - - return 0; -} - -static int orinoco_pci_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int err; - struct orinoco_private *priv; - struct orinoco_pci_card *card; - void __iomem *hermes_io; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return err; - } - - err = pci_request_regions(pdev, DRIVER_NAME); - if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); - goto fail_resources; - } - - hermes_io = pci_iomap(pdev, 0, 0); - if (!hermes_io) { - printk(KERN_ERR PFX "Cannot remap chipset registers\n"); - err = -EIO; - goto fail_map_hermes; - } - - /* Allocate network device */ - priv = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_pci_cor_reset, NULL); - if (!priv) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - err = -ENOMEM; - goto fail_alloc; - } - - card = priv->card; - - hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - DRIVER_NAME, priv); - if (err) { - printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); - err = -EBUSY; - goto fail_irq; - } - - err = orinoco_pci_cor_reset(priv); - if (err) { - printk(KERN_ERR PFX "Initial reset failed\n"); - goto fail; - } - - err = orinoco_init(priv); - if (err) { - printk(KERN_ERR PFX "orinoco_init() failed\n"); - goto fail; - } - - err = orinoco_if_add(priv, 0, 0, NULL); - if (err) { - printk(KERN_ERR PFX "orinoco_if_add() failed\n"); - goto fail_wiphy; - } - - pci_set_drvdata(pdev, priv); - - return 0; - - fail_wiphy: - wiphy_unregister(priv_to_wiphy(priv)); - fail: - free_irq(pdev->irq, priv); - - fail_irq: - free_orinocodev(priv); - - fail_alloc: - pci_iounmap(pdev, hermes_io); - - fail_map_hermes: - pci_release_regions(pdev); - - fail_resources: - pci_disable_device(pdev); - - return err; -} - -static void orinoco_pci_remove_one(struct pci_dev *pdev) -{ - struct orinoco_private *priv = pci_get_drvdata(pdev); - - orinoco_if_del(priv); - wiphy_unregister(priv_to_wiphy(priv)); - free_irq(pdev->irq, priv); - free_orinocodev(priv); - pci_iounmap(pdev, priv->hw.iobase); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static const struct pci_device_id orinoco_pci_id_table[] = { - /* Intersil Prism 3 */ - {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,}, - /* Intersil Prism 2.5 */ - {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,}, - /* Samsung MagicLAN SWL-2210P */ - {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,}, - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table); - -static struct pci_driver orinoco_pci_driver = { - .name = DRIVER_NAME, - .id_table = orinoco_pci_id_table, - .probe = orinoco_pci_init_one, - .remove = orinoco_pci_remove_one, - .driver.pm = &orinoco_pci_pm_ops, -}; - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin <proski@gnu.org>," - " David Gibson <hermes@gibson.dropbear.id.au> &" - " Jean Tourrilhes <jt@hpl.hp.com>)"; -MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> &" - " David Gibson <hermes@gibson.dropbear.id.au>"); -MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface"); -MODULE_LICENSE("Dual MPL/GPL"); - -static int __init orinoco_pci_init(void) -{ - printk(KERN_DEBUG "%s\n", version); - return pci_register_driver(&orinoco_pci_driver); -} - -static void __exit orinoco_pci_exit(void) -{ - pci_unregister_driver(&orinoco_pci_driver); -} - -module_init(orinoco_pci_init); -module_exit(orinoco_pci_exit); diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.h b/drivers/net/wireless/intersil/orinoco/orinoco_pci.h deleted file mode 100644 index d49d940864..0000000000 --- a/drivers/net/wireless/intersil/orinoco/orinoco_pci.h +++ /dev/null @@ -1,54 +0,0 @@ -/* orinoco_pci.h - * - * Common code for all Orinoco drivers for PCI devices, including - * both native PCI and PCMCIA-to-PCI bridges. - * - * Copyright (C) 2005, Pavel Roskin. - * See main.c for license. - */ - -#ifndef _ORINOCO_PCI_H -#define _ORINOCO_PCI_H - -#include <linux/netdevice.h> - -/* Driver specific data */ -struct orinoco_pci_card { - void __iomem *bridge_io; - void __iomem *attr_io; -}; - -static int __maybe_unused orinoco_pci_suspend(struct device *dev_d) -{ - struct pci_dev *pdev = to_pci_dev(dev_d); - struct orinoco_private *priv = pci_get_drvdata(pdev); - - orinoco_down(priv); - free_irq(pdev->irq, priv); - - return 0; -} - -static int __maybe_unused orinoco_pci_resume(struct device *dev_d) -{ - struct pci_dev *pdev = to_pci_dev(dev_d); - struct orinoco_private *priv = pci_get_drvdata(pdev); - struct net_device *dev = priv->ndev; - int err; - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, priv); - if (err) { - printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n", - dev->name); - return -EBUSY; - } - - return orinoco_up(priv); -} - -static SIMPLE_DEV_PM_OPS(orinoco_pci_pm_ops, - orinoco_pci_suspend, - orinoco_pci_resume); - -#endif /* _ORINOCO_PCI_H */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_plx.c b/drivers/net/wireless/intersil/orinoco/orinoco_plx.c deleted file mode 100644 index 73e6ae1240..0000000000 --- a/drivers/net/wireless/intersil/orinoco/orinoco_plx.c +++ /dev/null @@ -1,362 +0,0 @@ -/* orinoco_plx.c - * - * Driver for Prism II devices which would usually be driven by orinoco_cs, - * but are connected to the PCI bus by a PLX9052. - * - * Current maintainers are: - * Pavel Roskin <proski AT gnu.org> - * and David Gibson <hermes AT gibson.dropbear.id.au> - * - * (C) Copyright David Gibson, IBM Corp. 2001-2003. - * Copyright (C) 2001 Daniel Barlow - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - * - * Here's the general details on how the PLX9052 adapter works: - * - * - Two PCI I/O address spaces, one 0x80 long which contains the - * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA - * slot I/O address space. - * - * - One PCI memory address space, mapped to the PCMCIA attribute space - * (containing the CIS). - * - * Using the later, you can read through the CIS data to make sure the - * card is compatible with the driver. Keep in mind that the PCMCIA - * spec specifies the CIS as the lower 8 bits of each word read from - * the CIS, so to read the bytes of the CIS, read every other byte - * (0,2,4,...). Passing that test, you need to enable the I/O address - * space on the PCMCIA card via the PCMCIA COR register. This is the - * first byte following the CIS. In my case (which may not have any - * relation to what's on the PRISM2 cards), COR was at offset 0x800 - * within the PCI memory space. Write 0x41 to the COR register to - * enable I/O mode and to select level triggered interrupts. To - * confirm you actually succeeded, read the COR register back and make - * sure it actually got set to 0x41, in case you have an unexpected - * card inserted. - * - * Following that, you can treat the second PCI I/O address space (the - * one that's not 0x80 in length) as the PCMCIA I/O space. - * - * Note that in the Eumitcom's source for their drivers, they register - * the interrupt as edge triggered when registering it with the - * Windows kernel. I don't recall how to register edge triggered on - * Linux (if it can be done at all). But in some experimentation, I - * don't see much operational difference between using either - * interrupt mode. Don't mess with the interrupt mode in the COR - * register though, as the PLX9052 wants level triggers with the way - * the serial EEPROM configures it on the WL11000. - * - * There's some other little quirks related to timing that I bumped - * into, but I don't recall right now. Also, there's two variants of - * the WL11000 I've seen, revision A1 and T2. These seem to differ - * slightly in the timings configured in the wait-state generator in - * the PLX9052. There have also been some comments from Eumitcom that - * cards shouldn't be hot swapped, apparently due to risk of cooking - * the PLX9052. I'm unsure why they believe this, as I can't see - * anything in the design that would really cause a problem, except - * for crashing drivers not written to expect it. And having developed - * drivers for the WL11000, I'd say it's quite tricky to write code - * that will successfully deal with a hot unplug. Very odd things - * happen on the I/O side of things. But anyway, be warned. Despite - * that, I've hot-swapped a number of times during debugging and - * driver development for various reasons (stuck WAIT# line after the - * radio card's firmware locks up). - */ - -#define DRIVER_NAME "orinoco_plx" -#define PFX DRIVER_NAME ": " - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <pcmcia/cisreg.h> - -#include "orinoco.h" -#include "orinoco_pci.h" - -#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */ -#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ -#define COR_RESET (0x80) /* reset bit in the COR register */ -#define PLX_RESET_TIME (500) /* milliseconds */ - -#define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */ -#define PLX_INTCSR_INTEN (1 << 6) /* Interrupt Enable bit */ - -/* - * Do a soft reset of the card using the Configuration Option Register - */ -static int orinoco_plx_cor_reset(struct orinoco_private *priv) -{ - struct hermes *hw = &priv->hw; - struct orinoco_pci_card *card = priv->card; - unsigned long timeout; - u16 reg; - - iowrite8(COR_VALUE | COR_RESET, card->attr_io + COR_OFFSET); - mdelay(1); - - iowrite8(COR_VALUE, card->attr_io + COR_OFFSET); - mdelay(1); - - /* Just in case, wait more until the card is no longer busy */ - timeout = jiffies + msecs_to_jiffies(PLX_RESET_TIME); - reg = hermes_read_regn(hw, CMD); - while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { - mdelay(1); - reg = hermes_read_regn(hw, CMD); - } - - /* Still busy? */ - if (reg & HERMES_CMD_BUSY) { - printk(KERN_ERR PFX "Busy timeout\n"); - return -ETIMEDOUT; - } - - return 0; -} - -static int orinoco_plx_hw_init(struct orinoco_pci_card *card) -{ - int i; - u32 csr_reg; - static const u8 cis_magic[] = { - 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67 - }; - - printk(KERN_DEBUG PFX "CIS: "); - for (i = 0; i < 16; i++) - printk("%02X:", ioread8(card->attr_io + (i << 1))); - printk("\n"); - - /* Verify whether a supported PC card is present */ - /* FIXME: we probably need to be smarted about this */ - for (i = 0; i < sizeof(cis_magic); i++) { - if (cis_magic[i] != ioread8(card->attr_io + (i << 1))) { - printk(KERN_ERR PFX "The CIS value of Prism2 PC " - "card is unexpected\n"); - return -ENODEV; - } - } - - /* bjoern: We need to tell the card to enable interrupts, in - case the serial eprom didn't do this already. See the - PLX9052 data book, p8-1 and 8-24 for reference. */ - csr_reg = ioread32(card->bridge_io + PLX_INTCSR); - if (!(csr_reg & PLX_INTCSR_INTEN)) { - csr_reg |= PLX_INTCSR_INTEN; - iowrite32(csr_reg, card->bridge_io + PLX_INTCSR); - csr_reg = ioread32(card->bridge_io + PLX_INTCSR); - if (!(csr_reg & PLX_INTCSR_INTEN)) { - printk(KERN_ERR PFX "Cannot enable interrupts\n"); - return -EIO; - } - } - - return 0; -} - -static int orinoco_plx_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int err; - struct orinoco_private *priv; - struct orinoco_pci_card *card; - void __iomem *hermes_io, *attr_io, *bridge_io; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return err; - } - - err = pci_request_regions(pdev, DRIVER_NAME); - if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); - goto fail_resources; - } - - bridge_io = pci_iomap(pdev, 1, 0); - if (!bridge_io) { - printk(KERN_ERR PFX "Cannot map bridge registers\n"); - err = -EIO; - goto fail_map_bridge; - } - - attr_io = pci_iomap(pdev, 2, 0); - if (!attr_io) { - printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); - err = -EIO; - goto fail_map_attr; - } - - hermes_io = pci_iomap(pdev, 3, 0); - if (!hermes_io) { - printk(KERN_ERR PFX "Cannot map chipset registers\n"); - err = -EIO; - goto fail_map_hermes; - } - - /* Allocate network device */ - priv = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_plx_cor_reset, NULL); - if (!priv) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - err = -ENOMEM; - goto fail_alloc; - } - - card = priv->card; - card->bridge_io = bridge_io; - card->attr_io = attr_io; - - hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - DRIVER_NAME, priv); - if (err) { - printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); - err = -EBUSY; - goto fail_irq; - } - - err = orinoco_plx_hw_init(card); - if (err) { - printk(KERN_ERR PFX "Hardware initialization failed\n"); - goto fail; - } - - err = orinoco_plx_cor_reset(priv); - if (err) { - printk(KERN_ERR PFX "Initial reset failed\n"); - goto fail; - } - - err = orinoco_init(priv); - if (err) { - printk(KERN_ERR PFX "orinoco_init() failed\n"); - goto fail; - } - - err = orinoco_if_add(priv, 0, 0, NULL); - if (err) { - printk(KERN_ERR PFX "orinoco_if_add() failed\n"); - goto fail_wiphy; - } - - pci_set_drvdata(pdev, priv); - - return 0; - - fail_wiphy: - wiphy_unregister(priv_to_wiphy(priv)); - fail: - free_irq(pdev->irq, priv); - - fail_irq: - free_orinocodev(priv); - - fail_alloc: - pci_iounmap(pdev, hermes_io); - - fail_map_hermes: - pci_iounmap(pdev, attr_io); - - fail_map_attr: - pci_iounmap(pdev, bridge_io); - - fail_map_bridge: - pci_release_regions(pdev); - - fail_resources: - pci_disable_device(pdev); - - return err; -} - -static void orinoco_plx_remove_one(struct pci_dev *pdev) -{ - struct orinoco_private *priv = pci_get_drvdata(pdev); - struct orinoco_pci_card *card = priv->card; - - orinoco_if_del(priv); - wiphy_unregister(priv_to_wiphy(priv)); - free_irq(pdev->irq, priv); - free_orinocodev(priv); - pci_iounmap(pdev, priv->hw.iobase); - pci_iounmap(pdev, card->attr_io); - pci_iounmap(pdev, card->bridge_io); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static const struct pci_device_id orinoco_plx_id_table[] = { - {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */ - {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */ - {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */ - {0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* SMC EZConnect SMC2602W, - Eumitcom PCI WL11000, - Addtron AWA-100 */ - {0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* Global Sun Tech GL24110P */ - {0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,}, /* Reported working, but unknown */ - {0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */ - {0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */ - {0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by - Brendan W. McAdams <rit AT jacked-in.org> */ - {0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by - Damien Persohn <damien AT persohn.net> */ - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, orinoco_plx_id_table); - -static struct pci_driver orinoco_plx_driver = { - .name = DRIVER_NAME, - .id_table = orinoco_plx_id_table, - .probe = orinoco_plx_init_one, - .remove = orinoco_plx_remove_one, - .driver.pm = &orinoco_pci_pm_ops, -}; - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin <proski@gnu.org>," - " David Gibson <hermes@gibson.dropbear.id.au>," - " Daniel Barlow <dan@telent.net>)"; -MODULE_AUTHOR("Daniel Barlow <dan@telent.net>"); -MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge"); -MODULE_LICENSE("Dual MPL/GPL"); - -static int __init orinoco_plx_init(void) -{ - printk(KERN_DEBUG "%s\n", version); - return pci_register_driver(&orinoco_plx_driver); -} - -static void __exit orinoco_plx_exit(void) -{ - pci_unregister_driver(&orinoco_plx_driver); -} - -module_init(orinoco_plx_init); -module_exit(orinoco_plx_exit); diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c b/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c deleted file mode 100644 index 939d5a1dce..0000000000 --- a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c +++ /dev/null @@ -1,237 +0,0 @@ -/* orinoco_tmd.c - * - * Driver for Prism II devices which would usually be driven by orinoco_cs, - * but are connected to the PCI bus by a TMD7160. - * - * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net> - * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - * - * The actual driving is done by main.c, this is just resource - * allocation stuff. - * - * This driver is modeled after the orinoco_plx driver. The main - * difference is that the TMD chip has only IO port ranges and doesn't - * provide access to the PCMCIA attribute space. - * - * Pheecom sells cards with the TMD chip as "ASIC version" - */ - -#define DRIVER_NAME "orinoco_tmd" -#define PFX DRIVER_NAME ": " - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <pcmcia/cisreg.h> - -#include "orinoco.h" -#include "orinoco_pci.h" - -#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ -#define COR_RESET (0x80) /* reset bit in the COR register */ -#define TMD_RESET_TIME (500) /* milliseconds */ - -/* - * Do a soft reset of the card using the Configuration Option Register - */ -static int orinoco_tmd_cor_reset(struct orinoco_private *priv) -{ - struct hermes *hw = &priv->hw; - struct orinoco_pci_card *card = priv->card; - unsigned long timeout; - u16 reg; - - iowrite8(COR_VALUE | COR_RESET, card->bridge_io); - mdelay(1); - - iowrite8(COR_VALUE, card->bridge_io); - mdelay(1); - - /* Just in case, wait more until the card is no longer busy */ - timeout = jiffies + msecs_to_jiffies(TMD_RESET_TIME); - reg = hermes_read_regn(hw, CMD); - while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { - mdelay(1); - reg = hermes_read_regn(hw, CMD); - } - - /* Still busy? */ - if (reg & HERMES_CMD_BUSY) { - printk(KERN_ERR PFX "Busy timeout\n"); - return -ETIMEDOUT; - } - - return 0; -} - - -static int orinoco_tmd_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int err; - struct orinoco_private *priv; - struct orinoco_pci_card *card; - void __iomem *hermes_io, *bridge_io; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return err; - } - - err = pci_request_regions(pdev, DRIVER_NAME); - if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); - goto fail_resources; - } - - bridge_io = pci_iomap(pdev, 1, 0); - if (!bridge_io) { - printk(KERN_ERR PFX "Cannot map bridge registers\n"); - err = -EIO; - goto fail_map_bridge; - } - - hermes_io = pci_iomap(pdev, 2, 0); - if (!hermes_io) { - printk(KERN_ERR PFX "Cannot map chipset registers\n"); - err = -EIO; - goto fail_map_hermes; - } - - /* Allocate network device */ - priv = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_tmd_cor_reset, NULL); - if (!priv) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - err = -ENOMEM; - goto fail_alloc; - } - - card = priv->card; - card->bridge_io = bridge_io; - - hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - DRIVER_NAME, priv); - if (err) { - printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); - err = -EBUSY; - goto fail_irq; - } - - err = orinoco_tmd_cor_reset(priv); - if (err) { - printk(KERN_ERR PFX "Initial reset failed\n"); - goto fail; - } - - err = orinoco_init(priv); - if (err) { - printk(KERN_ERR PFX "orinoco_init() failed\n"); - goto fail; - } - - err = orinoco_if_add(priv, 0, 0, NULL); - if (err) { - printk(KERN_ERR PFX "orinoco_if_add() failed\n"); - goto fail; - } - - pci_set_drvdata(pdev, priv); - - return 0; - - fail: - free_irq(pdev->irq, priv); - - fail_irq: - free_orinocodev(priv); - - fail_alloc: - pci_iounmap(pdev, hermes_io); - - fail_map_hermes: - pci_iounmap(pdev, bridge_io); - - fail_map_bridge: - pci_release_regions(pdev); - - fail_resources: - pci_disable_device(pdev); - - return err; -} - -static void orinoco_tmd_remove_one(struct pci_dev *pdev) -{ - struct orinoco_private *priv = pci_get_drvdata(pdev); - struct orinoco_pci_card *card = priv->card; - - orinoco_if_del(priv); - free_irq(pdev->irq, priv); - free_orinocodev(priv); - pci_iounmap(pdev, priv->hw.iobase); - pci_iounmap(pdev, card->bridge_io); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static const struct pci_device_id orinoco_tmd_id_table[] = { - {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */ - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table); - -static struct pci_driver orinoco_tmd_driver = { - .name = DRIVER_NAME, - .id_table = orinoco_tmd_id_table, - .probe = orinoco_tmd_init_one, - .remove = orinoco_tmd_remove_one, - .driver.pm = &orinoco_pci_pm_ops, -}; - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Joerg Dorchain <joerg@dorchain.net>)"; -MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>"); -MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge"); -MODULE_LICENSE("Dual MPL/GPL"); - -static int __init orinoco_tmd_init(void) -{ - printk(KERN_DEBUG "%s\n", version); - return pci_register_driver(&orinoco_tmd_driver); -} - -static void __exit orinoco_tmd_exit(void) -{ - pci_unregister_driver(&orinoco_tmd_driver); -} - -module_init(orinoco_tmd_init); -module_exit(orinoco_tmd_exit); diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c deleted file mode 100644 index 866e0230df..0000000000 --- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c +++ /dev/null @@ -1,1787 +0,0 @@ -/* - * USB Orinoco driver - * - * Copyright (c) 2003 Manuel Estrada Sainz - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - * - * Queueing code based on linux-wlan-ng 0.2.1-pre5 - * - * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - * - * The license is the same as above. - * - * Initialy based on USB Skeleton driver - 0.7 - * - * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * NOTE: The original USB Skeleton driver is GPL, but all that code is - * gone so MPL/GPL applies. - */ - -#define DRIVER_NAME "orinoco_usb" -#define PFX DRIVER_NAME ": " - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/errno.h> -#include <linux/poll.h> -#include <linux/slab.h> -#include <linux/fcntl.h> -#include <linux/spinlock.h> -#include <linux/list.h> -#include <linux/usb.h> -#include <linux/timer.h> - -#include <linux/netdevice.h> -#include <linux/if_arp.h> -#include <linux/etherdevice.h> -#include <linux/wireless.h> -#include <linux/firmware.h> -#include <linux/refcount.h> - -#include "mic.h" -#include "orinoco.h" - -#ifndef URB_ASYNC_UNLINK -#define URB_ASYNC_UNLINK 0 -#endif - -struct header_struct { - /* 802.3 */ - u8 dest[ETH_ALEN]; - u8 src[ETH_ALEN]; - __be16 len; - /* 802.2 */ - u8 dsap; - u8 ssap; - u8 ctrl; - /* SNAP */ - u8 oui[3]; - __be16 ethertype; -} __packed; - -struct ez_usb_fw { - u16 size; - const u8 *code; -}; - -static struct ez_usb_fw firmware = { - .size = 0, - .code = NULL, -}; - -/* Debugging macros */ -#undef err -#define err(format, arg...) \ - do { printk(KERN_ERR PFX format "\n", ## arg); } while (0) - -MODULE_FIRMWARE("orinoco_ezusb_fw"); - -/* - * Under some conditions, the card gets stuck and stops paying attention - * to the world (i.e. data communication stalls) until we do something to - * it. Sending an INQ_TALLIES command seems to be enough and should be - * harmless otherwise. This behaviour has been observed when using the - * driver on a systemimager client during installation. In the past a - * timer was used to send INQ_TALLIES commands when there was no other - * activity, but it was troublesome and was removed. - */ - -#define USB_COMPAQ_VENDOR_ID 0x049f /* Compaq Computer Corp. */ -#define USB_COMPAQ_WL215_ID 0x001f /* Compaq WL215 USB Adapter */ -#define USB_COMPAQ_W200_ID 0x0076 /* Compaq W200 USB Adapter */ -#define USB_HP_WL215_ID 0x0082 /* Compaq WL215 USB Adapter */ - -#define USB_MELCO_VENDOR_ID 0x0411 -#define USB_BUFFALO_L11_ID 0x0006 /* BUFFALO WLI-USB-L11 */ -#define USB_BUFFALO_L11G_WR_ID 0x000B /* BUFFALO WLI-USB-L11G-WR */ -#define USB_BUFFALO_L11G_ID 0x000D /* BUFFALO WLI-USB-L11G */ - -#define USB_LUCENT_VENDOR_ID 0x047E /* Lucent Technologies */ -#define USB_LUCENT_ORINOCO_ID 0x0300 /* Lucent/Agere Orinoco USB Client */ - -#define USB_AVAYA8_VENDOR_ID 0x0D98 -#define USB_AVAYAE_VENDOR_ID 0x0D9E -#define USB_AVAYA_WIRELESS_ID 0x0300 /* Avaya USB Wireless Card */ - -#define USB_AGERE_VENDOR_ID 0x0D4E /* Agere Systems */ -#define USB_AGERE_MODEL0801_ID 0x1000 /* USB Wireless Card Model 0801 */ -#define USB_AGERE_MODEL0802_ID 0x1001 /* USB Wireless Card Model 0802 */ -#define USB_AGERE_REBRANDED_ID 0x047A /* USB WLAN Card */ - -#define USB_ELSA_VENDOR_ID 0x05CC -#define USB_ELSA_AIRLANCER_ID 0x3100 /* ELSA AirLancer USB-11 */ - -#define USB_LEGEND_VENDOR_ID 0x0E7C -#define USB_LEGEND_JOYNET_ID 0x0300 /* Joynet USB WLAN Card */ - -#define USB_SAMSUNG_VENDOR_ID 0x04E8 -#define USB_SAMSUNG_SEW2001U1_ID 0x5002 /* Samsung SEW-2001u Card */ -#define USB_SAMSUNG_SEW2001U2_ID 0x5B11 /* Samsung SEW-2001u Card */ -#define USB_SAMSUNG_SEW2003U_ID 0x7011 /* Samsung SEW-2003U Card */ - -#define USB_IGATE_VENDOR_ID 0x0681 -#define USB_IGATE_IGATE_11M_ID 0x0012 /* I-GATE 11M USB Card */ - -#define USB_FUJITSU_VENDOR_ID 0x0BF8 -#define USB_FUJITSU_E1100_ID 0x1002 /* connect2AIR WLAN E-1100 USB */ - -#define USB_2WIRE_VENDOR_ID 0x1630 -#define USB_2WIRE_WIRELESS_ID 0xff81 /* 2Wire USB Wireless adapter */ - - -#define EZUSB_REQUEST_FW_TRANS 0xA0 -#define EZUSB_REQUEST_TRIGGER 0xAA -#define EZUSB_REQUEST_TRIG_AC 0xAC -#define EZUSB_CPUCS_REG 0x7F92 - -#define EZUSB_RID_TX 0x0700 -#define EZUSB_RID_RX 0x0701 -#define EZUSB_RID_INIT1 0x0702 -#define EZUSB_RID_ACK 0x0710 -#define EZUSB_RID_READ_PDA 0x0800 -#define EZUSB_RID_PROG_INIT 0x0852 -#define EZUSB_RID_PROG_SET_ADDR 0x0853 -#define EZUSB_RID_PROG_BYTES 0x0854 -#define EZUSB_RID_PROG_END 0x0855 -#define EZUSB_RID_DOCMD 0x0860 - -/* Recognize info frames */ -#define EZUSB_IS_INFO(id) ((id >= 0xF000) && (id <= 0xF2FF)) - -#define EZUSB_MAGIC 0x0210 - -#define EZUSB_FRAME_DATA 1 -#define EZUSB_FRAME_CONTROL 2 - -#define DEF_TIMEOUT (3 * HZ) - -#define BULK_BUF_SIZE 2048 - -#define MAX_DL_SIZE (BULK_BUF_SIZE - sizeof(struct ezusb_packet)) - -#define FW_BUF_SIZE 64 -#define FW_VAR_OFFSET_PTR 0x359 -#define FW_VAR_VALUE 0 -#define FW_HOLE_START 0x100 -#define FW_HOLE_END 0x300 - -struct ezusb_packet { - __le16 magic; /* 0x0210 */ - u8 req_reply_count; - u8 ans_reply_count; - __le16 frame_type; /* 0x01 for data frames, 0x02 otherwise */ - __le16 size; /* transport size */ - __le16 crc; /* CRC up to here */ - __le16 hermes_len; - __le16 hermes_rid; - u8 data[]; -} __packed; - -/* Table of devices that work or may work with this driver */ -static const struct usb_device_id ezusb_table[] = { - {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_WL215_ID)}, - {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_HP_WL215_ID)}, - {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_W200_ID)}, - {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11_ID)}, - {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_WR_ID)}, - {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_ID)}, - {USB_DEVICE(USB_LUCENT_VENDOR_ID, USB_LUCENT_ORINOCO_ID)}, - {USB_DEVICE(USB_AVAYA8_VENDOR_ID, USB_AVAYA_WIRELESS_ID)}, - {USB_DEVICE(USB_AVAYAE_VENDOR_ID, USB_AVAYA_WIRELESS_ID)}, - {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0801_ID)}, - {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0802_ID)}, - {USB_DEVICE(USB_ELSA_VENDOR_ID, USB_ELSA_AIRLANCER_ID)}, - {USB_DEVICE(USB_LEGEND_VENDOR_ID, USB_LEGEND_JOYNET_ID)}, - {USB_DEVICE_VER(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U1_ID, - 0, 0)}, - {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U2_ID)}, - {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2003U_ID)}, - {USB_DEVICE(USB_IGATE_VENDOR_ID, USB_IGATE_IGATE_11M_ID)}, - {USB_DEVICE(USB_FUJITSU_VENDOR_ID, USB_FUJITSU_E1100_ID)}, - {USB_DEVICE(USB_2WIRE_VENDOR_ID, USB_2WIRE_WIRELESS_ID)}, - {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_REBRANDED_ID)}, - {} /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, ezusb_table); - -/* Structure to hold all of our device specific stuff */ -struct ezusb_priv { - struct usb_device *udev; - struct net_device *dev; - struct mutex mtx; - spinlock_t req_lock; - struct list_head req_pending; - struct list_head req_active; - spinlock_t reply_count_lock; - u16 hermes_reg_fake[0x40]; - u8 *bap_buf; - struct urb *read_urb; - int read_pipe; - int write_pipe; - u8 reply_count; -}; - -enum ezusb_state { - EZUSB_CTX_START, - EZUSB_CTX_QUEUED, - EZUSB_CTX_REQ_SUBMITTED, - EZUSB_CTX_REQ_COMPLETE, - EZUSB_CTX_RESP_RECEIVED, - EZUSB_CTX_REQ_TIMEOUT, - EZUSB_CTX_REQ_FAILED, - EZUSB_CTX_RESP_TIMEOUT, - EZUSB_CTX_REQSUBMIT_FAIL, - EZUSB_CTX_COMPLETE, -}; - -struct request_context { - struct list_head list; - refcount_t refcount; - struct completion done; /* Signals that CTX is dead */ - int killed; - struct urb *outurb; /* OUT for req pkt */ - struct ezusb_priv *upriv; - struct ezusb_packet *buf; - int buf_length; - struct timer_list timer; /* Timeout handling */ - enum ezusb_state state; /* Current state */ - /* the RID that we will wait for */ - u16 out_rid; - u16 in_rid; -}; - - -/* Forward declarations */ -static void ezusb_ctx_complete(struct request_context *ctx); -static void ezusb_req_queue_run(struct ezusb_priv *upriv); -static void ezusb_bulk_in_callback(struct urb *urb); - -static inline u8 ezusb_reply_inc(u8 count) -{ - if (count < 0x7F) - return count + 1; - else - return 1; -} - -static void ezusb_request_context_put(struct request_context *ctx) -{ - if (!refcount_dec_and_test(&ctx->refcount)) - return; - - WARN_ON(!ctx->done.done); - BUG_ON(ctx->outurb->status == -EINPROGRESS); - BUG_ON(timer_pending(&ctx->timer)); - usb_free_urb(ctx->outurb); - kfree(ctx->buf); - kfree(ctx); -} - -static inline void ezusb_mod_timer(struct ezusb_priv *upriv, - struct timer_list *timer, - unsigned long expire) -{ - if (!upriv->udev) - return; - mod_timer(timer, expire); -} - -static void ezusb_request_timerfn(struct timer_list *t) -{ - struct request_context *ctx = from_timer(ctx, t, timer); - - ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; - if (usb_unlink_urb(ctx->outurb) == -EINPROGRESS) { - ctx->state = EZUSB_CTX_REQ_TIMEOUT; - } else { - ctx->state = EZUSB_CTX_RESP_TIMEOUT; - dev_dbg(&ctx->outurb->dev->dev, "couldn't unlink\n"); - refcount_inc(&ctx->refcount); - ctx->killed = 1; - ezusb_ctx_complete(ctx); - ezusb_request_context_put(ctx); - } -}; - -static struct request_context *ezusb_alloc_ctx(struct ezusb_priv *upriv, - u16 out_rid, u16 in_rid) -{ - struct request_context *ctx; - - ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC); - if (!ctx) - return NULL; - - ctx->buf = kmalloc(BULK_BUF_SIZE, GFP_ATOMIC); - if (!ctx->buf) { - kfree(ctx); - return NULL; - } - ctx->outurb = usb_alloc_urb(0, GFP_ATOMIC); - if (!ctx->outurb) { - kfree(ctx->buf); - kfree(ctx); - return NULL; - } - - ctx->upriv = upriv; - ctx->state = EZUSB_CTX_START; - ctx->out_rid = out_rid; - ctx->in_rid = in_rid; - - refcount_set(&ctx->refcount, 1); - init_completion(&ctx->done); - - timer_setup(&ctx->timer, ezusb_request_timerfn, 0); - return ctx; -} - -static void ezusb_ctx_complete(struct request_context *ctx) -{ - struct ezusb_priv *upriv = ctx->upriv; - unsigned long flags; - - spin_lock_irqsave(&upriv->req_lock, flags); - - list_del_init(&ctx->list); - if (upriv->udev) { - spin_unlock_irqrestore(&upriv->req_lock, flags); - ezusb_req_queue_run(upriv); - spin_lock_irqsave(&upriv->req_lock, flags); - } - - switch (ctx->state) { - case EZUSB_CTX_COMPLETE: - case EZUSB_CTX_REQSUBMIT_FAIL: - case EZUSB_CTX_REQ_FAILED: - case EZUSB_CTX_REQ_TIMEOUT: - case EZUSB_CTX_RESP_TIMEOUT: - spin_unlock_irqrestore(&upriv->req_lock, flags); - - if ((ctx->out_rid == EZUSB_RID_TX) && upriv->dev) { - struct net_device *dev = upriv->dev; - struct net_device_stats *stats = &dev->stats; - - if (ctx->state != EZUSB_CTX_COMPLETE) - stats->tx_errors++; - else - stats->tx_packets++; - - netif_wake_queue(dev); - } - complete_all(&ctx->done); - ezusb_request_context_put(ctx); - break; - - default: - spin_unlock_irqrestore(&upriv->req_lock, flags); - if (!upriv->udev) { - /* This is normal, as all request contexts get flushed - * when the device is disconnected */ - err("Called, CTX not terminating, but device gone"); - complete_all(&ctx->done); - ezusb_request_context_put(ctx); - break; - } - - err("Called, CTX not in terminating state."); - /* Things are really bad if this happens. Just leak - * the CTX because it may still be linked to the - * queue or the OUT urb may still be active. - * Just leaking at least prevents an Oops or Panic. - */ - break; - } -} - -/* - * ezusb_req_queue_run: - * Description: - * Note: Only one active CTX at any one time, because there's no - * other (reliable) way to match the response URB to the correct - * CTX. - */ -static void ezusb_req_queue_run(struct ezusb_priv *upriv) -{ - unsigned long flags; - struct request_context *ctx; - int result; - - spin_lock_irqsave(&upriv->req_lock, flags); - - if (!list_empty(&upriv->req_active)) - goto unlock; - - if (list_empty(&upriv->req_pending)) - goto unlock; - - ctx = - list_entry(upriv->req_pending.next, struct request_context, - list); - - if (!ctx->upriv->udev) - goto unlock; - - /* We need to split this off to avoid a race condition */ - list_move_tail(&ctx->list, &upriv->req_active); - - if (ctx->state == EZUSB_CTX_QUEUED) { - refcount_inc(&ctx->refcount); - result = usb_submit_urb(ctx->outurb, GFP_ATOMIC); - if (result) { - ctx->state = EZUSB_CTX_REQSUBMIT_FAIL; - - spin_unlock_irqrestore(&upriv->req_lock, flags); - - err("Fatal, failed to submit command urb." - " error=%d\n", result); - - ezusb_ctx_complete(ctx); - ezusb_request_context_put(ctx); - goto done; - } - - ctx->state = EZUSB_CTX_REQ_SUBMITTED; - ezusb_mod_timer(ctx->upriv, &ctx->timer, - jiffies + DEF_TIMEOUT); - } - - unlock: - spin_unlock_irqrestore(&upriv->req_lock, flags); - - done: - return; -} - -static void ezusb_req_enqueue_run(struct ezusb_priv *upriv, - struct request_context *ctx) -{ - unsigned long flags; - - spin_lock_irqsave(&upriv->req_lock, flags); - - if (!ctx->upriv->udev) { - spin_unlock_irqrestore(&upriv->req_lock, flags); - goto done; - } - refcount_inc(&ctx->refcount); - list_add_tail(&ctx->list, &upriv->req_pending); - spin_unlock_irqrestore(&upriv->req_lock, flags); - - ctx->state = EZUSB_CTX_QUEUED; - ezusb_req_queue_run(upriv); - - done: - return; -} - -static void ezusb_request_out_callback(struct urb *urb) -{ - unsigned long flags; - enum ezusb_state state; - struct request_context *ctx = urb->context; - struct ezusb_priv *upriv = ctx->upriv; - - spin_lock_irqsave(&upriv->req_lock, flags); - - del_timer(&ctx->timer); - - if (ctx->killed) { - spin_unlock_irqrestore(&upriv->req_lock, flags); - pr_warn("interrupt called with dead ctx\n"); - goto out; - } - - state = ctx->state; - - if (urb->status == 0) { - switch (state) { - case EZUSB_CTX_REQ_SUBMITTED: - if (ctx->in_rid) { - ctx->state = EZUSB_CTX_REQ_COMPLETE; - /* reply URB still pending */ - ezusb_mod_timer(upriv, &ctx->timer, - jiffies + DEF_TIMEOUT); - spin_unlock_irqrestore(&upriv->req_lock, - flags); - break; - } - fallthrough; - case EZUSB_CTX_RESP_RECEIVED: - /* IN already received before this OUT-ACK */ - ctx->state = EZUSB_CTX_COMPLETE; - spin_unlock_irqrestore(&upriv->req_lock, flags); - ezusb_ctx_complete(ctx); - break; - - default: - spin_unlock_irqrestore(&upriv->req_lock, flags); - err("Unexpected state(0x%x, %d) in OUT URB", - state, urb->status); - break; - } - } else { - /* If someone cancels the OUT URB then its status - * should be either -ECONNRESET or -ENOENT. - */ - switch (state) { - case EZUSB_CTX_REQ_SUBMITTED: - case EZUSB_CTX_RESP_RECEIVED: - ctx->state = EZUSB_CTX_REQ_FAILED; - fallthrough; - - case EZUSB_CTX_REQ_FAILED: - case EZUSB_CTX_REQ_TIMEOUT: - spin_unlock_irqrestore(&upriv->req_lock, flags); - - ezusb_ctx_complete(ctx); - break; - - default: - spin_unlock_irqrestore(&upriv->req_lock, flags); - - err("Unexpected state(0x%x, %d) in OUT URB", - state, urb->status); - break; - } - } - out: - ezusb_request_context_put(ctx); -} - -static void ezusb_request_in_callback(struct ezusb_priv *upriv, - struct urb *urb) -{ - struct ezusb_packet *ans = urb->transfer_buffer; - struct request_context *ctx = NULL; - enum ezusb_state state; - unsigned long flags; - - /* Find the CTX on the active queue that requested this URB */ - spin_lock_irqsave(&upriv->req_lock, flags); - if (upriv->udev) { - struct list_head *item; - - list_for_each(item, &upriv->req_active) { - struct request_context *c; - int reply_count; - - c = list_entry(item, struct request_context, list); - reply_count = - ezusb_reply_inc(c->buf->req_reply_count); - if ((ans->ans_reply_count == reply_count) - && (le16_to_cpu(ans->hermes_rid) == c->in_rid)) { - ctx = c; - break; - } - netdev_dbg(upriv->dev, "Skipped (0x%x/0x%x) (%d/%d)\n", - le16_to_cpu(ans->hermes_rid), c->in_rid, - ans->ans_reply_count, reply_count); - } - } - - if (ctx == NULL) { - spin_unlock_irqrestore(&upriv->req_lock, flags); - err("%s: got unexpected RID: 0x%04X", __func__, - le16_to_cpu(ans->hermes_rid)); - ezusb_req_queue_run(upriv); - return; - } - - /* The data we want is in the in buffer, exchange */ - urb->transfer_buffer = ctx->buf; - ctx->buf = (void *) ans; - ctx->buf_length = urb->actual_length; - - state = ctx->state; - switch (state) { - case EZUSB_CTX_REQ_SUBMITTED: - /* We have received our response URB before - * our request has been acknowledged. Do NOT - * destroy our CTX yet, because our OUT URB - * is still alive ... - */ - ctx->state = EZUSB_CTX_RESP_RECEIVED; - spin_unlock_irqrestore(&upriv->req_lock, flags); - - /* Let the machine continue running. */ - break; - - case EZUSB_CTX_REQ_COMPLETE: - /* This is the usual path: our request - * has already been acknowledged, and - * we have now received the reply. - */ - ctx->state = EZUSB_CTX_COMPLETE; - - /* Stop the intimer */ - del_timer(&ctx->timer); - spin_unlock_irqrestore(&upriv->req_lock, flags); - - /* Call the completion handler */ - ezusb_ctx_complete(ctx); - break; - - default: - spin_unlock_irqrestore(&upriv->req_lock, flags); - - pr_warn("Matched IN URB, unexpected context state(0x%x)\n", - state); - /* Throw this CTX away and try submitting another */ - del_timer(&ctx->timer); - ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; - usb_unlink_urb(ctx->outurb); - ezusb_req_queue_run(upriv); - break; - } /* switch */ -} - -typedef void (*ezusb_ctx_wait)(struct ezusb_priv *, struct request_context *); - -static void ezusb_req_ctx_wait_compl(struct ezusb_priv *upriv, - struct request_context *ctx) -{ - switch (ctx->state) { - case EZUSB_CTX_QUEUED: - case EZUSB_CTX_REQ_SUBMITTED: - case EZUSB_CTX_REQ_COMPLETE: - case EZUSB_CTX_RESP_RECEIVED: - wait_for_completion(&ctx->done); - break; - default: - /* Done or failed - nothing to wait for */ - break; - } -} - -static void ezusb_req_ctx_wait_poll(struct ezusb_priv *upriv, - struct request_context *ctx) -{ - int msecs; - - switch (ctx->state) { - case EZUSB_CTX_QUEUED: - case EZUSB_CTX_REQ_SUBMITTED: - case EZUSB_CTX_REQ_COMPLETE: - case EZUSB_CTX_RESP_RECEIVED: - /* If we get called from a timer or with our lock acquired, then - * we can't wait for the completion and have to poll. This won't - * happen if the USB controller completes the URB requests in - * BH. - */ - msecs = DEF_TIMEOUT * (1000 / HZ); - - while (!try_wait_for_completion(&ctx->done) && msecs--) - udelay(1000); - break; - default: - /* Done or failed - nothing to wait for */ - break; - } -} - -static void ezusb_req_ctx_wait_skip(struct ezusb_priv *upriv, - struct request_context *ctx) -{ - WARN(1, "Shouldn't be invoked for in_rid\n"); -} - -static inline u16 build_crc(struct ezusb_packet *data) -{ - u16 crc = 0; - u8 *bytes = (u8 *)data; - int i; - - for (i = 0; i < 8; i++) - crc = (crc << 1) + bytes[i]; - - return crc; -} - -/* - * ezusb_fill_req: - * - * if data == NULL and length > 0 the data is assumed to be already in - * the target buffer and only the header is filled. - * - */ -static int ezusb_fill_req(struct ezusb_packet *req, u16 length, u16 rid, - const void *data, u16 frame_type, u8 reply_count) -{ - int total_size = sizeof(*req) + length; - - BUG_ON(total_size > BULK_BUF_SIZE); - - req->magic = cpu_to_le16(EZUSB_MAGIC); - req->req_reply_count = reply_count; - req->ans_reply_count = 0; - req->frame_type = cpu_to_le16(frame_type); - req->size = cpu_to_le16(length + 4); - req->crc = cpu_to_le16(build_crc(req)); - req->hermes_len = cpu_to_le16(HERMES_BYTES_TO_RECLEN(length)); - req->hermes_rid = cpu_to_le16(rid); - if (data) - memcpy(req->data, data, length); - return total_size; -} - -static int ezusb_submit_in_urb(struct ezusb_priv *upriv) -{ - int retval = 0; - void *cur_buf = upriv->read_urb->transfer_buffer; - - if (upriv->read_urb->status == -EINPROGRESS) { - netdev_dbg(upriv->dev, "urb busy, not resubmiting\n"); - retval = -EBUSY; - goto exit; - } - usb_fill_bulk_urb(upriv->read_urb, upriv->udev, upriv->read_pipe, - cur_buf, BULK_BUF_SIZE, - ezusb_bulk_in_callback, upriv); - upriv->read_urb->transfer_flags = 0; - retval = usb_submit_urb(upriv->read_urb, GFP_ATOMIC); - if (retval) - err("%s submit failed %d", __func__, retval); - - exit: - return retval; -} - -static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset) -{ - int ret; - u8 *res_val = NULL; - - if (!upriv->udev) { - err("%s: !upriv->udev", __func__); - return -EFAULT; - } - - res_val = kmalloc(sizeof(*res_val), GFP_KERNEL); - - if (!res_val) - return -ENOMEM; - - *res_val = reset; /* avoid argument promotion */ - - ret = usb_control_msg(upriv->udev, - usb_sndctrlpipe(upriv->udev, 0), - EZUSB_REQUEST_FW_TRANS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | - USB_DIR_OUT, EZUSB_CPUCS_REG, 0, res_val, - sizeof(*res_val), DEF_TIMEOUT); - - kfree(res_val); - - return ret; -} - -static int ezusb_firmware_download(struct ezusb_priv *upriv, - struct ez_usb_fw *fw) -{ - u8 *fw_buffer; - int retval, addr; - int variant_offset; - - fw_buffer = kmalloc(FW_BUF_SIZE, GFP_KERNEL); - if (!fw_buffer) { - printk(KERN_ERR PFX "Out of memory for firmware buffer.\n"); - return -ENOMEM; - } - /* - * This byte is 1 and should be replaced with 0. The offset is - * 0x10AD in version 0.0.6. The byte in question should follow - * the end of the code pointed to by the jump in the beginning - * of the firmware. Also, it is read by code located at 0x358. - */ - variant_offset = be16_to_cpup((__be16 *) &fw->code[FW_VAR_OFFSET_PTR]); - if (variant_offset >= fw->size) { - printk(KERN_ERR PFX "Invalid firmware variant offset: " - "0x%04x\n", variant_offset); - retval = -EINVAL; - goto fail; - } - - retval = ezusb_8051_cpucs(upriv, 1); - if (retval < 0) - goto fail; - for (addr = 0; addr < fw->size; addr += FW_BUF_SIZE) { - /* 0x100-0x300 should be left alone, it contains card - * specific data, like USB enumeration information */ - if ((addr >= FW_HOLE_START) && (addr < FW_HOLE_END)) - continue; - - memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE); - if (variant_offset >= addr && - variant_offset < addr + FW_BUF_SIZE) { - netdev_dbg(upriv->dev, - "Patching card_variant byte at 0x%04X\n", - variant_offset); - fw_buffer[variant_offset - addr] = FW_VAR_VALUE; - } - retval = usb_control_msg(upriv->udev, - usb_sndctrlpipe(upriv->udev, 0), - EZUSB_REQUEST_FW_TRANS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE - | USB_DIR_OUT, - addr, 0x0, - fw_buffer, FW_BUF_SIZE, - DEF_TIMEOUT); - - if (retval < 0) - goto fail; - } - retval = ezusb_8051_cpucs(upriv, 0); - if (retval < 0) - goto fail; - - goto exit; - fail: - printk(KERN_ERR PFX "Firmware download failed, error %d\n", - retval); - exit: - kfree(fw_buffer); - return retval; -} - -static int ezusb_access_ltv(struct ezusb_priv *upriv, - struct request_context *ctx, - u16 length, const void *data, u16 frame_type, - void *ans_buff, unsigned ans_size, u16 *ans_length, - ezusb_ctx_wait ezusb_ctx_wait_func) -{ - int req_size; - int retval = 0; - enum ezusb_state state; - - if (!upriv->udev) { - retval = -ENODEV; - goto exit; - } - - if (upriv->read_urb->status != -EINPROGRESS) - err("%s: in urb not pending", __func__); - - /* protect upriv->reply_count, guarantee sequential numbers */ - spin_lock_bh(&upriv->reply_count_lock); - req_size = ezusb_fill_req(ctx->buf, length, ctx->out_rid, data, - frame_type, upriv->reply_count); - usb_fill_bulk_urb(ctx->outurb, upriv->udev, upriv->write_pipe, - ctx->buf, req_size, - ezusb_request_out_callback, ctx); - - if (ctx->in_rid) - upriv->reply_count = ezusb_reply_inc(upriv->reply_count); - - ezusb_req_enqueue_run(upriv, ctx); - - spin_unlock_bh(&upriv->reply_count_lock); - - if (ctx->in_rid) - ezusb_ctx_wait_func(upriv, ctx); - - state = ctx->state; - switch (state) { - case EZUSB_CTX_COMPLETE: - retval = ctx->outurb->status; - break; - - case EZUSB_CTX_QUEUED: - case EZUSB_CTX_REQ_SUBMITTED: - if (!ctx->in_rid) - break; - fallthrough; - default: - err("%s: Unexpected context state %d", __func__, - state); - fallthrough; - case EZUSB_CTX_REQ_TIMEOUT: - case EZUSB_CTX_REQ_FAILED: - case EZUSB_CTX_RESP_TIMEOUT: - case EZUSB_CTX_REQSUBMIT_FAIL: - printk(KERN_ERR PFX "Access failed, resetting (state %d," - " reply_count %d)\n", state, upriv->reply_count); - upriv->reply_count = 0; - if (state == EZUSB_CTX_REQ_TIMEOUT - || state == EZUSB_CTX_RESP_TIMEOUT) { - printk(KERN_ERR PFX "ctx timed out\n"); - retval = -ETIMEDOUT; - } else { - printk(KERN_ERR PFX "ctx failed\n"); - retval = -EFAULT; - } - goto exit; - } - if (ctx->in_rid) { - struct ezusb_packet *ans = ctx->buf; - unsigned exp_len; - - if (ans->hermes_len != 0) - exp_len = le16_to_cpu(ans->hermes_len) * 2 + 12; - else - exp_len = 14; - - if (exp_len != ctx->buf_length) { - err("%s: length mismatch for RID 0x%04x: " - "expected %d, got %d", __func__, - ctx->in_rid, exp_len, ctx->buf_length); - retval = -EIO; - goto exit; - } - - if (ans_buff) - memcpy(ans_buff, ans->data, min(exp_len, ans_size)); - if (ans_length) - *ans_length = le16_to_cpu(ans->hermes_len); - } - exit: - ezusb_request_context_put(ctx); - return retval; -} - -static int __ezusb_write_ltv(struct hermes *hw, int bap, u16 rid, - u16 length, const void *data, - ezusb_ctx_wait ezusb_ctx_wait_func) -{ - struct ezusb_priv *upriv = hw->priv; - u16 frame_type; - struct request_context *ctx; - - if (length == 0) - return -EINVAL; - - length = HERMES_RECLEN_TO_BYTES(length); - - /* On memory mapped devices HERMES_RID_CNFGROUPADDRESSES can be - * set to be empty, but the USB bridge doesn't like it */ - if (length == 0) - return 0; - - ctx = ezusb_alloc_ctx(upriv, rid, EZUSB_RID_ACK); - if (!ctx) - return -ENOMEM; - - if (rid == EZUSB_RID_TX) - frame_type = EZUSB_FRAME_DATA; - else - frame_type = EZUSB_FRAME_CONTROL; - - return ezusb_access_ltv(upriv, ctx, length, data, frame_type, - NULL, 0, NULL, ezusb_ctx_wait_func); -} - -static int ezusb_write_ltv(struct hermes *hw, int bap, u16 rid, - u16 length, const void *data) -{ - return __ezusb_write_ltv(hw, bap, rid, length, data, - ezusb_req_ctx_wait_poll); -} - -static int __ezusb_read_ltv(struct hermes *hw, int bap, u16 rid, - unsigned bufsize, u16 *length, void *buf, - ezusb_ctx_wait ezusb_ctx_wait_func) - -{ - struct ezusb_priv *upriv = hw->priv; - struct request_context *ctx; - - if (bufsize % 2) - return -EINVAL; - - ctx = ezusb_alloc_ctx(upriv, rid, rid); - if (!ctx) - return -ENOMEM; - - return ezusb_access_ltv(upriv, ctx, 0, NULL, EZUSB_FRAME_CONTROL, - buf, bufsize, length, ezusb_req_ctx_wait_poll); -} - -static int ezusb_read_ltv(struct hermes *hw, int bap, u16 rid, - unsigned bufsize, u16 *length, void *buf) -{ - return __ezusb_read_ltv(hw, bap, rid, bufsize, length, buf, - ezusb_req_ctx_wait_poll); -} - -static int ezusb_read_ltv_preempt(struct hermes *hw, int bap, u16 rid, - unsigned bufsize, u16 *length, void *buf) -{ - return __ezusb_read_ltv(hw, bap, rid, bufsize, length, buf, - ezusb_req_ctx_wait_compl); -} - -static int ezusb_doicmd_wait(struct hermes *hw, u16 cmd, u16 parm0, u16 parm1, - u16 parm2, struct hermes_response *resp) -{ - WARN_ON_ONCE(1); - return -EINVAL; -} - -static int __ezusb_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0, - struct hermes_response *resp, - ezusb_ctx_wait ezusb_ctx_wait_func) -{ - struct ezusb_priv *upriv = hw->priv; - struct request_context *ctx; - - __le16 data[4] = { - cpu_to_le16(cmd), - cpu_to_le16(parm0), - 0, - 0, - }; - netdev_dbg(upriv->dev, "0x%04X, parm0 0x%04X\n", cmd, parm0); - ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK); - if (!ctx) - return -ENOMEM; - - return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, - EZUSB_FRAME_CONTROL, NULL, 0, NULL, - ezusb_ctx_wait_func); -} - -static int ezusb_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0, - struct hermes_response *resp) -{ - return __ezusb_docmd_wait(hw, cmd, parm0, resp, ezusb_req_ctx_wait_poll); -} - -static int ezusb_bap_pread(struct hermes *hw, int bap, - void *buf, int len, u16 id, u16 offset) -{ - struct ezusb_priv *upriv = hw->priv; - struct ezusb_packet *ans = (void *) upriv->read_urb->transfer_buffer; - int actual_length = upriv->read_urb->actual_length; - - if (id == EZUSB_RID_RX) { - if ((sizeof(*ans) + offset + len) > actual_length) { - printk(KERN_ERR PFX "BAP read beyond buffer end " - "in rx frame\n"); - return -EINVAL; - } - memcpy(buf, ans->data + offset, len); - return 0; - } - - if (EZUSB_IS_INFO(id)) { - /* Include 4 bytes for length/type */ - if ((sizeof(*ans) + offset + len - 4) > actual_length) { - printk(KERN_ERR PFX "BAP read beyond buffer end " - "in info frame\n"); - return -EFAULT; - } - memcpy(buf, ans->data + offset - 4, len); - } else { - printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id); - return -EINVAL; - } - - return 0; -} - -static int ezusb_read_pda(struct hermes *hw, __le16 *pda, - u32 pda_addr, u16 pda_len) -{ - struct ezusb_priv *upriv = hw->priv; - struct request_context *ctx; - __le16 data[] = { - cpu_to_le16(pda_addr & 0xffff), - cpu_to_le16(pda_len - 4) - }; - ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_READ_PDA, EZUSB_RID_READ_PDA); - if (!ctx) - return -ENOMEM; - - /* wl_lkm does not include PDA size in the PDA area. - * We will pad the information into pda, so other routines - * don't have to be modified */ - pda[0] = cpu_to_le16(pda_len - 2); - /* Includes CFG_PROD_DATA but not itself */ - pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ - - return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, - EZUSB_FRAME_CONTROL, &pda[2], pda_len - 4, - NULL, ezusb_req_ctx_wait_compl); -} - -static int ezusb_program_init(struct hermes *hw, u32 entry_point) -{ - struct ezusb_priv *upriv = hw->priv; - struct request_context *ctx; - __le32 data = cpu_to_le32(entry_point); - - ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_INIT, EZUSB_RID_ACK); - if (!ctx) - return -ENOMEM; - - return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, - EZUSB_FRAME_CONTROL, NULL, 0, NULL, - ezusb_req_ctx_wait_compl); -} - -static int ezusb_program_end(struct hermes *hw) -{ - struct ezusb_priv *upriv = hw->priv; - struct request_context *ctx; - - ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_END, EZUSB_RID_ACK); - if (!ctx) - return -ENOMEM; - - return ezusb_access_ltv(upriv, ctx, 0, NULL, - EZUSB_FRAME_CONTROL, NULL, 0, NULL, - ezusb_req_ctx_wait_compl); -} - -static int ezusb_program_bytes(struct hermes *hw, const char *buf, - u32 addr, u32 len) -{ - struct ezusb_priv *upriv = hw->priv; - struct request_context *ctx; - __le32 data = cpu_to_le32(addr); - int err; - - ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_SET_ADDR, EZUSB_RID_ACK); - if (!ctx) - return -ENOMEM; - - err = ezusb_access_ltv(upriv, ctx, sizeof(data), &data, - EZUSB_FRAME_CONTROL, NULL, 0, NULL, - ezusb_req_ctx_wait_compl); - if (err) - return err; - - ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_BYTES, EZUSB_RID_ACK); - if (!ctx) - return -ENOMEM; - - return ezusb_access_ltv(upriv, ctx, len, buf, - EZUSB_FRAME_CONTROL, NULL, 0, NULL, - ezusb_req_ctx_wait_compl); -} - -static int ezusb_program(struct hermes *hw, const char *buf, - u32 addr, u32 len) -{ - u32 ch_addr; - u32 ch_len; - int err = 0; - - /* We can only send 2048 bytes out of the bulk xmit at a time, - * so we have to split any programming into chunks of <2048 - * bytes. */ - - ch_len = (len < MAX_DL_SIZE) ? len : MAX_DL_SIZE; - ch_addr = addr; - - while (ch_addr < (addr + len)) { - pr_debug("Programming subblock of length %d " - "to address 0x%08x. Data @ %p\n", - ch_len, ch_addr, &buf[ch_addr - addr]); - - err = ezusb_program_bytes(hw, &buf[ch_addr - addr], - ch_addr, ch_len); - if (err) - break; - - ch_addr += ch_len; - ch_len = ((addr + len - ch_addr) < MAX_DL_SIZE) ? - (addr + len - ch_addr) : MAX_DL_SIZE; - } - - return err; -} - -static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct net_device_stats *stats = &dev->stats; - struct ezusb_priv *upriv = priv->card; - u8 mic[MICHAEL_MIC_LEN + 1]; - int err = 0; - int tx_control; - unsigned long flags; - struct request_context *ctx; - u8 *buf; - int tx_size; - - if (!netif_running(dev)) { - printk(KERN_ERR "%s: Tx on stopped device!\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (netif_queue_stopped(dev)) { - printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (orinoco_lock(priv, &flags) != 0) { - printk(KERN_ERR - "%s: ezusb_xmit() called while hw_unavailable\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (!netif_carrier_ok(dev) || - (priv->iw_mode == NL80211_IFTYPE_MONITOR)) { - /* Oops, the firmware hasn't established a connection, - silently drop the packet (this seems to be the - safest approach). */ - goto drop; - } - - /* Check packet length */ - if (skb->len < ETH_HLEN) - goto drop; - - tx_control = 0; - - err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control, - &mic[0]); - if (err) - goto drop; - - ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0); - if (!ctx) - goto drop; - - memset(ctx->buf, 0, BULK_BUF_SIZE); - buf = ctx->buf->data; - - { - __le16 *tx_cntl = (__le16 *)buf; - *tx_cntl = cpu_to_le16(tx_control); - buf += sizeof(*tx_cntl); - } - - memcpy(buf, skb->data, skb->len); - buf += skb->len; - - if (tx_control & HERMES_TXCTRL_MIC) { - u8 *m = mic; - /* Mic has been offset so it can be copied to an even - * address. We're copying eveything anyway, so we - * don't need to copy that first byte. */ - if (skb->len % 2) - m++; - memcpy(buf, m, MICHAEL_MIC_LEN); - buf += MICHAEL_MIC_LEN; - } - - /* Finally, we actually initiate the send */ - netif_stop_queue(dev); - - /* The card may behave better if we send evenly sized usb transfers */ - tx_size = ALIGN(buf - ctx->buf->data, 2); - - err = ezusb_access_ltv(upriv, ctx, tx_size, NULL, - EZUSB_FRAME_DATA, NULL, 0, NULL, - ezusb_req_ctx_wait_skip); - - if (err) { - netif_start_queue(dev); - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d transmitting packet\n", - dev->name, err); - goto busy; - } - - netif_trans_update(dev); - stats->tx_bytes += skb->len; - goto ok; - - drop: - stats->tx_errors++; - stats->tx_dropped++; - - ok: - orinoco_unlock(priv, &flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - - busy: - orinoco_unlock(priv, &flags); - return NETDEV_TX_BUSY; -} - -static int ezusb_allocate(struct hermes *hw, u16 size, u16 *fid) -{ - *fid = EZUSB_RID_TX; - return 0; -} - - -static int ezusb_hard_reset(struct orinoco_private *priv) -{ - struct ezusb_priv *upriv = priv->card; - int retval = ezusb_8051_cpucs(upriv, 1); - - if (retval < 0) { - err("Failed to reset"); - return retval; - } - - retval = ezusb_8051_cpucs(upriv, 0); - if (retval < 0) { - err("Failed to unreset"); - return retval; - } - - netdev_dbg(upriv->dev, "sending control message\n"); - retval = usb_control_msg(upriv->udev, - usb_sndctrlpipe(upriv->udev, 0), - EZUSB_REQUEST_TRIGGER, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | - USB_DIR_OUT, 0x0, 0x0, NULL, 0, - DEF_TIMEOUT); - if (retval < 0) { - err("EZUSB_REQUEST_TRIGGER failed retval %d", retval); - return retval; - } -#if 0 - dbg("Sending EZUSB_REQUEST_TRIG_AC"); - retval = usb_control_msg(upriv->udev, - usb_sndctrlpipe(upriv->udev, 0), - EZUSB_REQUEST_TRIG_AC, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | - USB_DIR_OUT, 0x00FA, 0x0, NULL, 0, - DEF_TIMEOUT); - if (retval < 0) { - err("EZUSB_REQUEST_TRIG_AC failed retval %d", retval); - return retval; - } -#endif - - return 0; -} - - -static int ezusb_init(struct hermes *hw) -{ - struct ezusb_priv *upriv = hw->priv; - int retval; - - if (!upriv) - return -EINVAL; - - upriv->reply_count = 0; - /* Write the MAGIC number on the simulated registers to keep - * orinoco.c happy */ - hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); - hermes_write_regn(hw, RXFID, EZUSB_RID_RX); - - usb_kill_urb(upriv->read_urb); - ezusb_submit_in_urb(upriv); - - retval = __ezusb_write_ltv(hw, 0, EZUSB_RID_INIT1, - HERMES_BYTES_TO_RECLEN(2), "\x10\x00", - ezusb_req_ctx_wait_compl); - if (retval < 0) { - printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval); - return retval; - } - - retval = __ezusb_docmd_wait(hw, HERMES_CMD_INIT, 0, NULL, - ezusb_req_ctx_wait_compl); - if (retval < 0) { - printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval); - return retval; - } - - return 0; -} - -static void ezusb_bulk_in_callback(struct urb *urb) -{ - struct ezusb_priv *upriv = (struct ezusb_priv *) urb->context; - struct ezusb_packet *ans = urb->transfer_buffer; - u16 crc; - u16 hermes_rid; - - if (upriv->udev == NULL) - return; - - if (urb->status == -ETIMEDOUT) { - /* When a device gets unplugged we get this every time - * we resubmit, flooding the logs. Since we don't use - * USB timeouts, it shouldn't happen any other time*/ - pr_warn("%s: urb timed out, not resubmitting\n", __func__); - return; - } - if (urb->status == -ECONNABORTED) { - pr_warn("%s: connection abort, resubmitting urb\n", - __func__); - goto resubmit; - } - if ((urb->status == -EILSEQ) - || (urb->status == -ENOENT) - || (urb->status == -ECONNRESET)) { - netdev_dbg(upriv->dev, "status %d, not resubmiting\n", - urb->status); - return; - } - if (urb->status) - netdev_dbg(upriv->dev, "status: %d length: %d\n", - urb->status, urb->actual_length); - if (urb->actual_length < sizeof(*ans)) { - err("%s: short read, ignoring", __func__); - goto resubmit; - } - crc = build_crc(ans); - if (le16_to_cpu(ans->crc) != crc) { - err("CRC error, ignoring packet"); - goto resubmit; - } - - hermes_rid = le16_to_cpu(ans->hermes_rid); - if ((hermes_rid != EZUSB_RID_RX) && !EZUSB_IS_INFO(hermes_rid)) { - ezusb_request_in_callback(upriv, urb); - } else if (upriv->dev) { - struct net_device *dev = upriv->dev; - struct orinoco_private *priv = ndev_priv(dev); - struct hermes *hw = &priv->hw; - - if (hermes_rid == EZUSB_RID_RX) { - __orinoco_ev_rx(dev, hw); - } else { - hermes_write_regn(hw, INFOFID, - le16_to_cpu(ans->hermes_rid)); - __orinoco_ev_info(dev, hw); - } - } - - resubmit: - if (upriv->udev) - ezusb_submit_in_urb(upriv); -} - -static inline void ezusb_delete(struct ezusb_priv *upriv) -{ - struct list_head *item; - struct list_head *tmp_item; - unsigned long flags; - - BUG_ON(!upriv); - - mutex_lock(&upriv->mtx); - - upriv->udev = NULL; /* No timer will be rearmed from here */ - - usb_kill_urb(upriv->read_urb); - - spin_lock_irqsave(&upriv->req_lock, flags); - list_for_each_safe(item, tmp_item, &upriv->req_active) { - struct request_context *ctx; - int err; - - ctx = list_entry(item, struct request_context, list); - refcount_inc(&ctx->refcount); - - ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; - err = usb_unlink_urb(ctx->outurb); - - spin_unlock_irqrestore(&upriv->req_lock, flags); - if (err == -EINPROGRESS) - wait_for_completion(&ctx->done); - - del_timer_sync(&ctx->timer); - /* FIXME: there is an slight chance for the irq handler to - * be running */ - if (!list_empty(&ctx->list)) - ezusb_ctx_complete(ctx); - - ezusb_request_context_put(ctx); - spin_lock_irqsave(&upriv->req_lock, flags); - } - spin_unlock_irqrestore(&upriv->req_lock, flags); - - list_for_each_safe(item, tmp_item, &upriv->req_pending) - ezusb_ctx_complete(list_entry(item, - struct request_context, list)); - - if (upriv->read_urb && upriv->read_urb->status == -EINPROGRESS) - printk(KERN_ERR PFX "Some URB in progress\n"); - - mutex_unlock(&upriv->mtx); - - if (upriv->read_urb) { - kfree(upriv->read_urb->transfer_buffer); - usb_free_urb(upriv->read_urb); - } - kfree(upriv->bap_buf); - if (upriv->dev) { - struct orinoco_private *priv = ndev_priv(upriv->dev); - orinoco_if_del(priv); - wiphy_unregister(priv_to_wiphy(upriv)); - free_orinocodev(priv); - } -} - -static void ezusb_lock_irqsave(spinlock_t *lock, - unsigned long *flags) __acquires(lock) -{ - spin_lock_bh(lock); -} - -static void ezusb_unlock_irqrestore(spinlock_t *lock, - unsigned long *flags) __releases(lock) -{ - spin_unlock_bh(lock); -} - -static void ezusb_lock_irq(spinlock_t *lock) __acquires(lock) -{ - spin_lock_bh(lock); -} - -static void ezusb_unlock_irq(spinlock_t *lock) __releases(lock) -{ - spin_unlock_bh(lock); -} - -static const struct hermes_ops ezusb_ops = { - .init = ezusb_init, - .cmd_wait = ezusb_docmd_wait, - .init_cmd_wait = ezusb_doicmd_wait, - .allocate = ezusb_allocate, - .read_ltv = ezusb_read_ltv, - .read_ltv_pr = ezusb_read_ltv_preempt, - .write_ltv = ezusb_write_ltv, - .bap_pread = ezusb_bap_pread, - .read_pda = ezusb_read_pda, - .program_init = ezusb_program_init, - .program_end = ezusb_program_end, - .program = ezusb_program, - .lock_irqsave = ezusb_lock_irqsave, - .unlock_irqrestore = ezusb_unlock_irqrestore, - .lock_irq = ezusb_lock_irq, - .unlock_irq = ezusb_unlock_irq, -}; - -static const struct net_device_ops ezusb_netdev_ops = { - .ndo_open = orinoco_open, - .ndo_stop = orinoco_stop, - .ndo_start_xmit = ezusb_xmit, - .ndo_set_rx_mode = orinoco_set_multicast_list, - .ndo_change_mtu = orinoco_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, - .ndo_tx_timeout = orinoco_tx_timeout, -}; - -static int ezusb_probe(struct usb_interface *interface, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(interface); - struct orinoco_private *priv; - struct hermes *hw; - struct ezusb_priv *upriv = NULL; - struct usb_interface_descriptor *iface_desc; - struct usb_endpoint_descriptor *ep; - const struct firmware *fw_entry = NULL; - int retval = 0; - int i; - - priv = alloc_orinocodev(sizeof(*upriv), &udev->dev, - ezusb_hard_reset, NULL); - if (!priv) { - err("Couldn't allocate orinocodev"); - retval = -ENOMEM; - goto exit; - } - - hw = &priv->hw; - - upriv = priv->card; - - mutex_init(&upriv->mtx); - spin_lock_init(&upriv->reply_count_lock); - - spin_lock_init(&upriv->req_lock); - INIT_LIST_HEAD(&upriv->req_pending); - INIT_LIST_HEAD(&upriv->req_active); - - upriv->udev = udev; - - hw->iobase = (void __force __iomem *) &upriv->hermes_reg_fake; - hw->reg_spacing = HERMES_16BIT_REGSPACING; - hw->priv = upriv; - hw->ops = &ezusb_ops; - - /* set up the endpoint information */ - /* check out the endpoints */ - - iface_desc = &interface->cur_altsetting->desc; - for (i = 0; i < iface_desc->bNumEndpoints; ++i) { - ep = &interface->cur_altsetting->endpoint[i].desc; - - if (usb_endpoint_is_bulk_in(ep)) { - /* we found a bulk in endpoint */ - if (upriv->read_urb != NULL) { - pr_warn("Found a second bulk in ep, ignored\n"); - continue; - } - - upriv->read_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!upriv->read_urb) - goto error; - if (le16_to_cpu(ep->wMaxPacketSize) != 64) - pr_warn("bulk in: wMaxPacketSize!= 64\n"); - if (ep->bEndpointAddress != (2 | USB_DIR_IN)) - pr_warn("bulk in: bEndpointAddress: %d\n", - ep->bEndpointAddress); - upriv->read_pipe = usb_rcvbulkpipe(udev, - ep-> - bEndpointAddress); - upriv->read_urb->transfer_buffer = - kmalloc(BULK_BUF_SIZE, GFP_KERNEL); - if (!upriv->read_urb->transfer_buffer) { - err("Couldn't allocate IN buffer"); - goto error; - } - } - - if (usb_endpoint_is_bulk_out(ep)) { - /* we found a bulk out endpoint */ - if (upriv->bap_buf != NULL) { - pr_warn("Found a second bulk out ep, ignored\n"); - continue; - } - - if (le16_to_cpu(ep->wMaxPacketSize) != 64) - pr_warn("bulk out: wMaxPacketSize != 64\n"); - if (ep->bEndpointAddress != 2) - pr_warn("bulk out: bEndpointAddress: %d\n", - ep->bEndpointAddress); - upriv->write_pipe = usb_sndbulkpipe(udev, - ep-> - bEndpointAddress); - upriv->bap_buf = kmalloc(BULK_BUF_SIZE, GFP_KERNEL); - if (!upriv->bap_buf) { - err("Couldn't allocate bulk_out_buffer"); - goto error; - } - } - } - if (!upriv->bap_buf || !upriv->read_urb) { - err("Didn't find the required bulk endpoints"); - goto error; - } - - if (request_firmware(&fw_entry, "orinoco_ezusb_fw", - &interface->dev) == 0) { - firmware.size = fw_entry->size; - firmware.code = fw_entry->data; - } - if (firmware.size && firmware.code) { - if (ezusb_firmware_download(upriv, &firmware) < 0) - goto error; - } else { - err("No firmware to download"); - goto error; - } - - if (ezusb_hard_reset(priv) < 0) { - err("Cannot reset the device"); - goto error; - } - - /* If the firmware is already downloaded orinoco.c will call - * ezusb_init but if the firmware is not already there, that will make - * the kernel very unstable, so we try initializing here and quit in - * case of error */ - if (ezusb_init(hw) < 0) { - err("Couldn't initialize the device"); - err("Firmware may not be downloaded or may be wrong."); - goto error; - } - - /* Initialise the main driver */ - if (orinoco_init(priv) != 0) { - err("orinoco_init() failed\n"); - goto error; - } - - if (orinoco_if_add(priv, 0, 0, &ezusb_netdev_ops) != 0) { - upriv->dev = NULL; - err("%s: orinoco_if_add() failed", __func__); - wiphy_unregister(priv_to_wiphy(priv)); - goto error; - } - upriv->dev = priv->ndev; - - goto exit; - - error: - ezusb_delete(upriv); - if (upriv->dev) { - /* upriv->dev was 0, so ezusb_delete() didn't free it */ - free_orinocodev(priv); - } - upriv = NULL; - retval = -EFAULT; - exit: - if (fw_entry) { - firmware.code = NULL; - firmware.size = 0; - release_firmware(fw_entry); - } - usb_set_intfdata(interface, upriv); - return retval; -} - - -static void ezusb_disconnect(struct usb_interface *intf) -{ - struct ezusb_priv *upriv = usb_get_intfdata(intf); - usb_set_intfdata(intf, NULL); - ezusb_delete(upriv); - printk(KERN_INFO PFX "Disconnected\n"); -} - - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver orinoco_driver = { - .name = DRIVER_NAME, - .probe = ezusb_probe, - .disconnect = ezusb_disconnect, - .id_table = ezusb_table, - .disable_hub_initiated_lpm = 1, -}; - -module_usb_driver(orinoco_driver); - -MODULE_AUTHOR("Manuel Estrada Sainz"); -MODULE_DESCRIPTION("Driver for Orinoco wireless LAN cards using EZUSB bridge"); -MODULE_LICENSE("Dual MPL/GPL"); diff --git a/drivers/net/wireless/intersil/orinoco/scan.c b/drivers/net/wireless/intersil/orinoco/scan.c deleted file mode 100644 index 6d1d084854..0000000000 --- a/drivers/net/wireless/intersil/orinoco/scan.c +++ /dev/null @@ -1,259 +0,0 @@ -/* Helpers for managing scan queues - * - * See copyright notice in main.c - */ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ieee80211.h> -#include <net/cfg80211.h> - -#include "hermes.h" -#include "orinoco.h" -#include "main.h" - -#include "scan.h" - -#define ZERO_DBM_OFFSET 0x95 -#define MAX_SIGNAL_LEVEL 0x8A -#define MIN_SIGNAL_LEVEL 0x2F - -#define SIGNAL_TO_DBM(x) \ - (clamp_t(s32, (x), MIN_SIGNAL_LEVEL, MAX_SIGNAL_LEVEL) \ - - ZERO_DBM_OFFSET) -#define SIGNAL_TO_MBM(x) (SIGNAL_TO_DBM(x) * 100) - -static int symbol_build_supp_rates(u8 *buf, const __le16 *rates) -{ - int i; - u8 rate; - - buf[0] = WLAN_EID_SUPP_RATES; - for (i = 0; i < 5; i++) { - rate = le16_to_cpu(rates[i]); - /* NULL terminated */ - if (rate == 0x0) - break; - buf[i + 2] = rate; - } - buf[1] = i; - - return i + 2; -} - -static int prism_build_supp_rates(u8 *buf, const u8 *rates) -{ - int i; - - buf[0] = WLAN_EID_SUPP_RATES; - for (i = 0; i < 8; i++) { - /* NULL terminated */ - if (rates[i] == 0x0) - break; - buf[i + 2] = rates[i]; - } - buf[1] = i; - - /* We might still have another 2 rates, which need to go in - * extended supported rates */ - if (i == 8 && rates[i] > 0) { - buf[10] = WLAN_EID_EXT_SUPP_RATES; - for (; i < 10; i++) { - /* NULL terminated */ - if (rates[i] == 0x0) - break; - buf[i + 2] = rates[i]; - } - buf[11] = i - 8; - } - - return (i < 8) ? i + 2 : i + 4; -} - -static void orinoco_add_hostscan_result(struct orinoco_private *priv, - const union hermes_scan_info *bss) -{ - struct wiphy *wiphy = priv_to_wiphy(priv); - struct ieee80211_channel *channel; - struct cfg80211_bss *cbss; - u8 *ie; - u8 ie_buf[46]; - u64 timestamp; - s32 signal; - u16 capability; - u16 beacon_interval; - int ie_len; - int freq; - int len; - - len = le16_to_cpu(bss->a.essid_len); - - /* Reconstruct SSID and bitrate IEs to pass up */ - ie_buf[0] = WLAN_EID_SSID; - ie_buf[1] = len; - memcpy(&ie_buf[2], bss->a.essid, len); - - ie = ie_buf + len + 2; - ie_len = ie_buf[1] + 2; - switch (priv->firmware_type) { - case FIRMWARE_TYPE_SYMBOL: - ie_len += symbol_build_supp_rates(ie, bss->s.rates); - break; - - case FIRMWARE_TYPE_INTERSIL: - ie_len += prism_build_supp_rates(ie, bss->p.rates); - break; - - case FIRMWARE_TYPE_AGERE: - default: - break; - } - - freq = ieee80211_channel_to_frequency( - le16_to_cpu(bss->a.channel), NL80211_BAND_2GHZ); - channel = ieee80211_get_channel(wiphy, freq); - if (!channel) { - printk(KERN_DEBUG "Invalid channel designation %04X(%04X)", - bss->a.channel, freq); - return; /* Then ignore it for now */ - } - timestamp = 0; - capability = le16_to_cpu(bss->a.capabilities); - beacon_interval = le16_to_cpu(bss->a.beacon_interv); - signal = SIGNAL_TO_MBM(le16_to_cpu(bss->a.level)); - - cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN, - bss->a.bssid, timestamp, capability, - beacon_interval, ie_buf, ie_len, signal, - GFP_KERNEL); - cfg80211_put_bss(wiphy, cbss); -} - -void orinoco_add_extscan_result(struct orinoco_private *priv, - struct agere_ext_scan_info *bss, - size_t len) -{ - struct wiphy *wiphy = priv_to_wiphy(priv); - struct ieee80211_channel *channel; - struct cfg80211_bss *cbss; - const u8 *ie; - u64 timestamp; - s32 signal; - u16 capability; - u16 beacon_interval; - size_t ie_len; - int chan, freq; - - ie_len = len - sizeof(*bss); - ie = cfg80211_find_ie(WLAN_EID_DS_PARAMS, bss->data, ie_len); - chan = ie ? ie[2] : 0; - freq = ieee80211_channel_to_frequency(chan, NL80211_BAND_2GHZ); - channel = ieee80211_get_channel(wiphy, freq); - - timestamp = le64_to_cpu(bss->timestamp); - capability = le16_to_cpu(bss->capabilities); - beacon_interval = le16_to_cpu(bss->beacon_interval); - ie = bss->data; - signal = SIGNAL_TO_MBM(bss->level); - - cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN, - bss->bssid, timestamp, capability, - beacon_interval, ie, ie_len, signal, - GFP_KERNEL); - cfg80211_put_bss(wiphy, cbss); -} - -void orinoco_add_hostscan_results(struct orinoco_private *priv, - unsigned char *buf, - size_t len) -{ - int offset; /* In the scan data */ - size_t atom_len; - bool abort = false; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - atom_len = sizeof(struct agere_scan_apinfo); - offset = 0; - break; - - case FIRMWARE_TYPE_SYMBOL: - /* Lack of documentation necessitates this hack. - * Different firmwares have 68 or 76 byte long atoms. - * We try modulo first. If the length divides by both, - * we check what would be the channel in the second - * frame for a 68-byte atom. 76-byte atoms have 0 there. - * Valid channel cannot be 0. */ - if (len % 76) - atom_len = 68; - else if (len % 68) - atom_len = 76; - else if (len >= 1292 && buf[68] == 0) - atom_len = 76; - else - atom_len = 68; - offset = 0; - break; - - case FIRMWARE_TYPE_INTERSIL: - offset = 4; - if (priv->has_hostscan) { - atom_len = le16_to_cpup((__le16 *)buf); - /* Sanity check for atom_len */ - if (atom_len < sizeof(struct prism2_scan_apinfo)) { - printk(KERN_ERR "%s: Invalid atom_len in scan " - "data: %zu\n", priv->ndev->name, - atom_len); - abort = true; - goto scan_abort; - } - } else - atom_len = offsetof(struct prism2_scan_apinfo, atim); - break; - - default: - abort = true; - goto scan_abort; - } - - /* Check that we got an whole number of atoms */ - if ((len - offset) % atom_len) { - printk(KERN_ERR "%s: Unexpected scan data length %zu, " - "atom_len %zu, offset %d\n", priv->ndev->name, len, - atom_len, offset); - abort = true; - goto scan_abort; - } - - /* Process the entries one by one */ - for (; offset + atom_len <= len; offset += atom_len) { - union hermes_scan_info *atom; - - atom = (union hermes_scan_info *) (buf + offset); - - orinoco_add_hostscan_result(priv, atom); - } - - scan_abort: - if (priv->scan_request) { - struct cfg80211_scan_info info = { - .aborted = abort, - }; - - cfg80211_scan_done(priv->scan_request, &info); - priv->scan_request = NULL; - } -} - -void orinoco_scan_done(struct orinoco_private *priv, bool abort) -{ - if (priv->scan_request) { - struct cfg80211_scan_info info = { - .aborted = abort, - }; - - cfg80211_scan_done(priv->scan_request, &info); - priv->scan_request = NULL; - } -} diff --git a/drivers/net/wireless/intersil/orinoco/scan.h b/drivers/net/wireless/intersil/orinoco/scan.h deleted file mode 100644 index 27281fb0a6..0000000000 --- a/drivers/net/wireless/intersil/orinoco/scan.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Helpers for managing scan queues - * - * See copyright notice in main.c - */ -#ifndef _ORINOCO_SCAN_H_ -#define _ORINOCO_SCAN_H_ - -/* Forward declarations */ -struct orinoco_private; -struct agere_ext_scan_info; - -/* Add scan results */ -void orinoco_add_extscan_result(struct orinoco_private *priv, - struct agere_ext_scan_info *atom, - size_t len); -void orinoco_add_hostscan_results(struct orinoco_private *dev, - unsigned char *buf, - size_t len); -void orinoco_scan_done(struct orinoco_private *priv, bool abort); - -#endif /* _ORINOCO_SCAN_H_ */ diff --git a/drivers/net/wireless/intersil/orinoco/spectrum_cs.c b/drivers/net/wireless/intersil/orinoco/spectrum_cs.c deleted file mode 100644 index 841d623c62..0000000000 --- a/drivers/net/wireless/intersil/orinoco/spectrum_cs.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as - * Symbol Wireless Networker LA4137, CompactFlash cards by Socket - * Communications and Intel PRO/Wireless 2011B. - * - * The driver implements Symbol firmware download. The rest is handled - * in hermes.c and main.c. - * - * Utilities for downloading the Symbol firmware are available at - * http://sourceforge.net/projects/orinoco/ - * - * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org> - * Portions based on orinoco_cs.c: - * Copyright (C) David Gibson, Linuxcare Australia - * Portions based on Spectrum24tDnld.c from original spectrum24 driver: - * Copyright (C) Symbol Technologies. - * - * See copyright notice in file main.c. - */ - -#define DRIVER_NAME "spectrum_cs" -#define PFX DRIVER_NAME ": " - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/cisreg.h> -#include <pcmcia/ds.h> - -#include "orinoco.h" - -/********************************************************************/ -/* Module stuff */ -/********************************************************************/ - -MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"); -MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader"); -MODULE_LICENSE("Dual MPL/GPL"); - -/* Module parameters */ - -/* Some D-Link cards have buggy CIS. They do work at 5v properly, but - * don't have any CIS entry for it. This workaround it... */ -static int ignore_cis_vcc; /* = 0 */ -module_param(ignore_cis_vcc, int, 0); -MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); - -/********************************************************************/ -/* Data structures */ -/********************************************************************/ - -/* PCMCIA specific device information (goes in the card field of - * struct orinoco_private */ -struct orinoco_pccard { - struct pcmcia_device *p_dev; -}; - -/********************************************************************/ -/* Function prototypes */ -/********************************************************************/ - -static int spectrum_cs_config(struct pcmcia_device *link); -static void spectrum_cs_release(struct pcmcia_device *link); - -/* Constants for the CISREG_CCSR register */ -#define HCR_RUN 0x07 /* run firmware after reset */ -#define HCR_IDLE 0x0E /* don't run firmware after reset */ -#define HCR_MEM16 0x10 /* memory width bit, should be preserved */ - - -/* - * Reset the card using configuration registers COR and CCSR. - * If IDLE is 1, stop the firmware, so that it can be safely rewritten. - */ -static int -spectrum_reset(struct pcmcia_device *link, int idle) -{ - int ret; - u8 save_cor; - u8 ccsr; - - /* Doing it if hardware is gone is guaranteed crash */ - if (!pcmcia_dev_present(link)) - return -ENODEV; - - /* Save original COR value */ - ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor); - if (ret) - goto failed; - - /* Soft-Reset card */ - ret = pcmcia_write_config_byte(link, CISREG_COR, - (save_cor | COR_SOFT_RESET)); - if (ret) - goto failed; - udelay(1000); - - /* Read CCSR */ - ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr); - if (ret) - goto failed; - - /* - * Start or stop the firmware. Memory width bit should be - * preserved from the value we've just read. - */ - ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16); - ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr); - if (ret) - goto failed; - udelay(1000); - - /* Restore original COR configuration index */ - ret = pcmcia_write_config_byte(link, CISREG_COR, - (save_cor & ~COR_SOFT_RESET)); - if (ret) - goto failed; - udelay(1000); - return 0; - -failed: - return -ENODEV; -} - -/********************************************************************/ -/* Device methods */ -/********************************************************************/ - -static int -spectrum_cs_hard_reset(struct orinoco_private *priv) -{ - struct orinoco_pccard *card = priv->card; - struct pcmcia_device *link = card->p_dev; - - /* Soft reset using COR and HCR */ - spectrum_reset(link, 0); - - return 0; -} - -static int -spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) -{ - struct orinoco_pccard *card = priv->card; - struct pcmcia_device *link = card->p_dev; - - return spectrum_reset(link, idle); -} - -/********************************************************************/ -/* PCMCIA stuff */ -/********************************************************************/ - -static int -spectrum_cs_probe(struct pcmcia_device *link) -{ - struct orinoco_private *priv; - struct orinoco_pccard *card; - int ret; - - priv = alloc_orinocodev(sizeof(*card), &link->dev, - spectrum_cs_hard_reset, - spectrum_cs_stop_firmware); - if (!priv) - return -ENOMEM; - card = priv->card; - - /* Link both structures together */ - card->p_dev = link; - link->priv = priv; - - ret = spectrum_cs_config(link); - if (ret) - goto err_free_orinocodev; - - return 0; - -err_free_orinocodev: - free_orinocodev(priv); - return ret; -} - -static void spectrum_cs_detach(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - - orinoco_if_del(priv); - - spectrum_cs_release(link); - - free_orinocodev(priv); -} /* spectrum_cs_detach */ - -static int spectrum_cs_config_check(struct pcmcia_device *p_dev, - void *priv_data) -{ - if (p_dev->config_index == 0) - return -EINVAL; - - return pcmcia_request_io(p_dev); -}; - -static int -spectrum_cs_config(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - struct hermes *hw = &priv->hw; - int ret; - void __iomem *mem; - - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | - CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; - if (ignore_cis_vcc) - link->config_flags &= ~CONF_AUTO_CHECK_VCC; - ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); - if (ret) { - if (!ignore_cis_vcc) - printk(KERN_ERR PFX "GetNextTuple(): No matching " - "CIS configuration. Maybe you need the " - "ignore_cis_vcc=1 parameter.\n"); - goto failed; - } - - mem = ioport_map(link->resource[0]->start, - resource_size(link->resource[0])); - if (!mem) - goto failed; - - /* We initialize the hermes structure before completing PCMCIA - * configuration just in case the interrupt handler gets - * called. */ - hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - hw->eeprom_pda = true; - - ret = pcmcia_request_irq(link, orinoco_interrupt); - if (ret) - goto failed; - - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - /* Reset card */ - if (spectrum_cs_hard_reset(priv) != 0) - goto failed; - - /* Initialise the main driver */ - if (orinoco_init(priv) != 0) { - printk(KERN_ERR PFX "orinoco_init() failed\n"); - goto failed; - } - - /* Register an interface with the stack */ - if (orinoco_if_add(priv, link->resource[0]->start, - link->irq, NULL) != 0) { - printk(KERN_ERR PFX "orinoco_if_add() failed\n"); - goto failed; - } - - return 0; - - failed: - spectrum_cs_release(link); - return -ENODEV; -} /* spectrum_cs_config */ - -static void -spectrum_cs_release(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - unsigned long flags; - - /* We're committed to taking the device away now, so mark the - * hardware as unavailable */ - priv->hw.ops->lock_irqsave(&priv->lock, &flags); - priv->hw_unavailable++; - priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); - - pcmcia_disable_device(link); - if (priv->hw.iobase) - ioport_unmap(priv->hw.iobase); -} /* spectrum_cs_release */ - - -static int -spectrum_cs_suspend(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - - /* Mark the device as stopped, to block IO until later */ - orinoco_down(priv); - - return 0; -} - -static int -spectrum_cs_resume(struct pcmcia_device *link) -{ - struct orinoco_private *priv = link->priv; - int err = orinoco_up(priv); - - return err; -} - - -/********************************************************************/ -/* Module initialization */ -/********************************************************************/ - -static const struct pcmcia_device_id spectrum_cs_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ - PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ - PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */ - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); - -static struct pcmcia_driver orinoco_driver = { - .owner = THIS_MODULE, - .name = DRIVER_NAME, - .probe = spectrum_cs_probe, - .remove = spectrum_cs_detach, - .suspend = spectrum_cs_suspend, - .resume = spectrum_cs_resume, - .id_table = spectrum_cs_ids, -}; -module_pcmcia_driver(orinoco_driver); diff --git a/drivers/net/wireless/intersil/orinoco/wext.c b/drivers/net/wireless/intersil/orinoco/wext.c deleted file mode 100644 index dea1ff0443..0000000000 --- a/drivers/net/wireless/intersil/orinoco/wext.c +++ /dev/null @@ -1,1428 +0,0 @@ -/* Wireless extensions support. - * - * See copyright notice in main.c - */ -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/if_arp.h> -#include <linux/wireless.h> -#include <linux/ieee80211.h> -#include <linux/etherdevice.h> -#include <net/iw_handler.h> -#include <net/cfg80211.h> -#include <net/cfg80211-wext.h> - -#include "hermes.h" -#include "hermes_rid.h" -#include "orinoco.h" - -#include "hw.h" -#include "mic.h" -#include "scan.h" -#include "main.h" - -#include "wext.h" - -#define MAX_RID_LEN 1024 - -/* Helper routine to record keys - * It is called under orinoco_lock so it may not sleep */ -static int orinoco_set_key(struct orinoco_private *priv, int index, - enum orinoco_alg alg, const u8 *key, int key_len, - const u8 *seq, int seq_len) -{ - kfree_sensitive(priv->keys[index].key); - kfree_sensitive(priv->keys[index].seq); - - if (key_len) { - priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC); - if (!priv->keys[index].key) - goto nomem; - } else - priv->keys[index].key = NULL; - - if (seq_len) { - priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC); - if (!priv->keys[index].seq) - goto free_key; - } else - priv->keys[index].seq = NULL; - - priv->keys[index].key_len = key_len; - priv->keys[index].seq_len = seq_len; - - if (key_len) - memcpy((void *)priv->keys[index].key, key, key_len); - if (seq_len) - memcpy((void *)priv->keys[index].seq, seq, seq_len); - - switch (alg) { - case ORINOCO_ALG_TKIP: - priv->keys[index].cipher = WLAN_CIPHER_SUITE_TKIP; - break; - - case ORINOCO_ALG_WEP: - priv->keys[index].cipher = (key_len > SMALL_KEY_SIZE) ? - WLAN_CIPHER_SUITE_WEP104 : WLAN_CIPHER_SUITE_WEP40; - break; - - case ORINOCO_ALG_NONE: - default: - priv->keys[index].cipher = 0; - break; - } - - return 0; - -free_key: - kfree(priv->keys[index].key); - priv->keys[index].key = NULL; - -nomem: - priv->keys[index].key_len = 0; - priv->keys[index].seq_len = 0; - priv->keys[index].cipher = 0; - - return -ENOMEM; -} - -static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct hermes *hw = &priv->hw; - struct iw_statistics *wstats = &priv->wstats; - int err; - unsigned long flags; - - if (!netif_device_present(dev)) { - printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", - dev->name); - return NULL; /* FIXME: Can we do better than this? */ - } - - /* If busy, return the old stats. Returning NULL may cause - * the interface to disappear from /proc/net/wireless */ - if (orinoco_lock(priv, &flags) != 0) - return wstats; - - /* We can't really wait for the tallies inquiry command to - * complete, so we just use the previous results and trigger - * a new tallies inquiry command for next time - Jean II */ - /* FIXME: Really we should wait for the inquiry to come back - - * as it is the stats we give don't make a whole lot of sense. - * Unfortunately, it's not clear how to do that within the - * wireless extensions framework: I think we're in user - * context, but a lock seems to be held by the time we get in - * here so we're not safe to sleep here. */ - hermes_inquire(hw, HERMES_INQ_TALLIES); - - if (priv->iw_mode == NL80211_IFTYPE_ADHOC) { - memset(&wstats->qual, 0, sizeof(wstats->qual)); - /* If a spy address is defined, we report stats of the - * first spy address - Jean II */ - if (SPY_NUMBER(priv)) { - wstats->qual.qual = priv->spy_data.spy_stat[0].qual; - wstats->qual.level = priv->spy_data.spy_stat[0].level; - wstats->qual.noise = priv->spy_data.spy_stat[0].noise; - wstats->qual.updated = - priv->spy_data.spy_stat[0].updated; - } - } else { - struct { - __le16 qual, signal, noise, unused; - } __packed cq; - - err = HERMES_READ_RECORD(hw, USER_BAP, - HERMES_RID_COMMSQUALITY, &cq); - - if (!err) { - wstats->qual.qual = (int)le16_to_cpu(cq.qual); - wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; - wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; - wstats->qual.updated = - IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; - } - } - - orinoco_unlock(priv, &flags); - return wstats; -} - -/********************************************************************/ -/* Wireless extensions */ -/********************************************************************/ - -static int orinoco_ioctl_setwap(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct sockaddr *ap_addr = &wrqu->ap_addr; - struct orinoco_private *priv = ndev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Enable automatic roaming - no sanity checks are needed */ - if (is_zero_ether_addr(ap_addr->sa_data) || - is_broadcast_ether_addr(ap_addr->sa_data)) { - priv->bssid_fixed = 0; - eth_zero_addr(priv->desired_bssid); - - /* "off" means keep existing connection */ - if (ap_addr->sa_data[0] == 0) { - __orinoco_hw_set_wap(priv); - err = 0; - } - goto out; - } - - if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { - printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " - "support manual roaming\n", - dev->name); - err = -EOPNOTSUPP; - goto out; - } - - if (priv->iw_mode != NL80211_IFTYPE_STATION) { - printk(KERN_WARNING "%s: Manual roaming supported only in " - "managed mode\n", dev->name); - err = -EOPNOTSUPP; - goto out; - } - - /* Intersil firmware hangs without Desired ESSID */ - if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && - strlen(priv->desired_essid) == 0) { - printk(KERN_WARNING "%s: Desired ESSID must be set for " - "manual roaming\n", dev->name); - err = -EOPNOTSUPP; - goto out; - } - - /* Finally, enable manual roaming */ - priv->bssid_fixed = 1; - memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); - - out: - orinoco_unlock(priv, &flags); - return err; -} - -static int orinoco_ioctl_getwap(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct sockaddr *ap_addr = &wrqu->ap_addr; - struct orinoco_private *priv = ndev_priv(dev); - - int err = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - ap_addr->sa_family = ARPHRD_ETHER; - err = orinoco_hw_get_current_bssid(priv, ap_addr->sa_data); - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_setiwencode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *keybuf) -{ - struct iw_point *erq = &wrqu->encoding; - struct orinoco_private *priv = ndev_priv(dev); - int index = (erq->flags & IW_ENCODE_INDEX) - 1; - int setindex = priv->tx_key; - enum orinoco_alg encode_alg = priv->encode_alg; - int restricted = priv->wep_restrict; - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (!priv->has_wep) - return -EOPNOTSUPP; - - if (erq->pointer) { - /* We actually have a key to set - check its length */ - if (erq->length > LARGE_KEY_SIZE) - return -E2BIG; - - if ((erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep) - return -E2BIG; - } - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Clear any TKIP key we have */ - if ((priv->has_wpa) && (priv->encode_alg == ORINOCO_ALG_TKIP)) - (void) orinoco_clear_tkip_key(priv, setindex); - - if (erq->length > 0) { - if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) - index = priv->tx_key; - - /* Switch on WEP if off */ - if (encode_alg != ORINOCO_ALG_WEP) { - setindex = index; - encode_alg = ORINOCO_ALG_WEP; - } - } else { - /* Important note : if the user do "iwconfig eth0 enc off", - * we will arrive there with an index of -1. This is valid - * but need to be taken care off... Jean II */ - if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { - if ((index != -1) || (erq->flags == 0)) { - err = -EINVAL; - goto out; - } - } else { - /* Set the index : Check that the key is valid */ - if (priv->keys[index].key_len == 0) { - err = -EINVAL; - goto out; - } - setindex = index; - } - } - - if (erq->flags & IW_ENCODE_DISABLED) - encode_alg = ORINOCO_ALG_NONE; - if (erq->flags & IW_ENCODE_OPEN) - restricted = 0; - if (erq->flags & IW_ENCODE_RESTRICTED) - restricted = 1; - - if (erq->pointer && erq->length > 0) { - err = orinoco_set_key(priv, index, ORINOCO_ALG_WEP, keybuf, - erq->length, NULL, 0); - } - priv->tx_key = setindex; - - /* Try fast key change if connected and only keys are changed */ - if ((priv->encode_alg == encode_alg) && - (priv->wep_restrict == restricted) && - netif_carrier_ok(dev)) { - err = __orinoco_hw_setup_wepkeys(priv); - /* No need to commit if successful */ - goto out; - } - - priv->encode_alg = encode_alg; - priv->wep_restrict = restricted; - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getiwencode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *keybuf) -{ - struct iw_point *erq = &wrqu->encoding; - struct orinoco_private *priv = ndev_priv(dev); - int index = (erq->flags & IW_ENCODE_INDEX) - 1; - unsigned long flags; - - if (!priv->has_wep) - return -EOPNOTSUPP; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) - index = priv->tx_key; - - erq->flags = 0; - if (!priv->encode_alg) - erq->flags |= IW_ENCODE_DISABLED; - erq->flags |= index + 1; - - if (priv->wep_restrict) - erq->flags |= IW_ENCODE_RESTRICTED; - else - erq->flags |= IW_ENCODE_OPEN; - - erq->length = priv->keys[index].key_len; - - memcpy(keybuf, priv->keys[index].key, erq->length); - - orinoco_unlock(priv, &flags); - return 0; -} - -static int orinoco_ioctl_setessid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *essidbuf) -{ - struct iw_point *erq = &wrqu->essid; - struct orinoco_private *priv = ndev_priv(dev); - unsigned long flags; - - /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it - * anyway... - Jean II */ - - /* Hum... Should not use Wireless Extension constant (may change), - * should use our own... - Jean II */ - if (erq->length > IW_ESSID_MAX_SIZE) - return -E2BIG; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ - memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); - - /* If not ANY, get the new ESSID */ - if (erq->flags) - memcpy(priv->desired_essid, essidbuf, erq->length); - - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getessid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *essidbuf) -{ - struct iw_point *erq = &wrqu->essid; - struct orinoco_private *priv = ndev_priv(dev); - int active; - int err = 0; - unsigned long flags; - - if (netif_running(dev)) { - err = orinoco_hw_get_essid(priv, &active, essidbuf); - if (err < 0) - return err; - erq->length = err; - } else { - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE); - erq->length = strlen(priv->desired_essid); - orinoco_unlock(priv, &flags); - } - - erq->flags = 1; - - return 0; -} - -static int orinoco_ioctl_setfreq(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct iw_freq *frq = &wrqu->freq; - struct orinoco_private *priv = ndev_priv(dev); - int chan = -1; - unsigned long flags; - int err = -EINPROGRESS; /* Call commit handler */ - - /* In infrastructure mode the AP sets the channel */ - if (priv->iw_mode == NL80211_IFTYPE_STATION) - return -EBUSY; - - if ((frq->e == 0) && (frq->m <= 1000)) { - /* Setting by channel number */ - chan = frq->m; - } else { - /* Setting by frequency */ - int denom = 1; - int i; - - /* Calculate denominator to rescale to MHz */ - for (i = 0; i < (6 - frq->e); i++) - denom *= 10; - - chan = ieee80211_frequency_to_channel(frq->m / denom); - } - - if ((chan < 1) || (chan > NUM_CHANNELS) || - !(priv->channel_mask & (1 << (chan - 1)))) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - priv->channel = chan; - if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { - /* Fast channel change - no commit if successful */ - struct hermes *hw = &priv->hw; - err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_SET_CHANNEL, - chan, NULL); - } - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getfreq(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct iw_freq *frq = &wrqu->freq; - struct orinoco_private *priv = ndev_priv(dev); - int tmp; - - /* Locking done in there */ - tmp = orinoco_hw_get_freq(priv); - if (tmp < 0) - return tmp; - - frq->m = tmp * 100000; - frq->e = 1; - - return 0; -} - -static int orinoco_ioctl_getsens(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct iw_param *srq = &wrqu->sens; - struct orinoco_private *priv = ndev_priv(dev); - struct hermes *hw = &priv->hw; - u16 val; - int err; - unsigned long flags; - - if (!priv->has_sensitivity) - return -EOPNOTSUPP; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFSYSTEMSCALE, &val); - orinoco_unlock(priv, &flags); - - if (err) - return err; - - srq->value = val; - srq->fixed = 0; /* auto */ - - return 0; -} - -static int orinoco_ioctl_setsens(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct iw_param *srq = &wrqu->sens; - struct orinoco_private *priv = ndev_priv(dev); - int val = srq->value; - unsigned long flags; - - if (!priv->has_sensitivity) - return -EOPNOTSUPP; - - if ((val < 1) || (val > 3)) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - priv->ap_density = val; - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_setrate(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct iw_param *rrq = &wrqu->bitrate; - struct orinoco_private *priv = ndev_priv(dev); - int ratemode; - int bitrate; /* 100s of kilobits */ - unsigned long flags; - - /* As the user space doesn't know our highest rate, it uses -1 - * to ask us to set the highest rate. Test it using "iwconfig - * ethX rate auto" - Jean II */ - if (rrq->value == -1) - bitrate = 110; - else { - if (rrq->value % 100000) - return -EINVAL; - bitrate = rrq->value / 100000; - } - - ratemode = orinoco_get_bitratemode(bitrate, !rrq->fixed); - - if (ratemode == -1) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - priv->bitratemode = ratemode; - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; -} - -static int orinoco_ioctl_getrate(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct iw_param *rrq = &wrqu->bitrate; - struct orinoco_private *priv = ndev_priv(dev); - int err = 0; - int bitrate, automatic; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - orinoco_get_ratemode_cfg(priv->bitratemode, &bitrate, &automatic); - - /* If the interface is running we try to find more about the - current mode */ - if (netif_running(dev)) { - int act_bitrate; - int lerr; - - /* Ignore errors if we can't get the actual bitrate */ - lerr = orinoco_hw_get_act_bitrate(priv, &act_bitrate); - if (!lerr) - bitrate = act_bitrate; - } - - orinoco_unlock(priv, &flags); - - rrq->value = bitrate; - rrq->fixed = !automatic; - rrq->disabled = 0; - - return err; -} - -static int orinoco_ioctl_setpower(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct iw_param *prq = &wrqu->power; - struct orinoco_private *priv = ndev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (prq->disabled) { - priv->pm_on = 0; - } else { - switch (prq->flags & IW_POWER_MODE) { - case IW_POWER_UNICAST_R: - priv->pm_mcast = 0; - priv->pm_on = 1; - break; - case IW_POWER_ALL_R: - priv->pm_mcast = 1; - priv->pm_on = 1; - break; - case IW_POWER_ON: - /* No flags : but we may have a value - Jean II */ - break; - default: - err = -EINVAL; - goto out; - } - - if (prq->flags & IW_POWER_TIMEOUT) { - priv->pm_on = 1; - priv->pm_timeout = prq->value / 1000; - } - if (prq->flags & IW_POWER_PERIOD) { - priv->pm_on = 1; - priv->pm_period = prq->value / 1000; - } - /* It's valid to not have a value if we are just toggling - * the flags... Jean II */ - if (!priv->pm_on) { - err = -EINVAL; - goto out; - } - } - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getpower(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct iw_param *prq = &wrqu->power; - struct orinoco_private *priv = ndev_priv(dev); - struct hermes *hw = &priv->hw; - int err = 0; - u16 enable, period, timeout, mcast; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMENABLED, &enable); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMAXSLEEPDURATION, &period); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMULTICASTRECEIVE, &mcast); - if (err) - goto out; - - prq->disabled = !enable; - /* Note : by default, display the period */ - if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { - prq->flags = IW_POWER_TIMEOUT; - prq->value = timeout * 1000; - } else { - prq->flags = IW_POWER_PERIOD; - prq->value = period * 1000; - } - if (mcast) - prq->flags |= IW_POWER_ALL_R; - else - prq->flags |= IW_POWER_UNICAST_R; - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_set_encodeext(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct iw_point *encoding = &wrqu->encoding; - struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - int idx, alg = ext->alg, set_key = 1; - unsigned long flags; - int err = -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Determine and validate the key index */ - idx = encoding->flags & IW_ENCODE_INDEX; - if (idx) { - if ((idx < 1) || (idx > 4)) - goto out; - idx--; - } else - idx = priv->tx_key; - - if (encoding->flags & IW_ENCODE_DISABLED) - alg = IW_ENCODE_ALG_NONE; - - if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) { - /* Clear any TKIP TX key we had */ - (void) orinoco_clear_tkip_key(priv, priv->tx_key); - } - - if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { - priv->tx_key = idx; - set_key = ((alg == IW_ENCODE_ALG_TKIP) || - (ext->key_len > 0)) ? 1 : 0; - } - - if (set_key) { - /* Set the requested key first */ - switch (alg) { - case IW_ENCODE_ALG_NONE: - priv->encode_alg = ORINOCO_ALG_NONE; - err = orinoco_set_key(priv, idx, ORINOCO_ALG_NONE, - NULL, 0, NULL, 0); - break; - - case IW_ENCODE_ALG_WEP: - if (ext->key_len <= 0) - goto out; - - priv->encode_alg = ORINOCO_ALG_WEP; - err = orinoco_set_key(priv, idx, ORINOCO_ALG_WEP, - ext->key, ext->key_len, NULL, 0); - break; - - case IW_ENCODE_ALG_TKIP: - { - u8 *tkip_iv = NULL; - - if (!priv->has_wpa || - (ext->key_len > sizeof(struct orinoco_tkip_key))) - goto out; - - priv->encode_alg = ORINOCO_ALG_TKIP; - - if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) - tkip_iv = &ext->rx_seq[0]; - - err = orinoco_set_key(priv, idx, ORINOCO_ALG_TKIP, - ext->key, ext->key_len, tkip_iv, - ORINOCO_SEQ_LEN); - - err = __orinoco_hw_set_tkip_key(priv, idx, - ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY, - priv->keys[idx].key, priv->keys[idx].key_len, - tkip_iv, ORINOCO_SEQ_LEN, NULL, 0); - if (err) - printk(KERN_ERR "%s: Error %d setting TKIP key" - "\n", dev->name, err); - - goto out; - } - default: - goto out; - } - } - err = -EINPROGRESS; - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_get_encodeext(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct iw_point *encoding = &wrqu->encoding; - struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - int idx, max_key_len; - unsigned long flags; - int err; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = -EINVAL; - max_key_len = encoding->length - sizeof(*ext); - if (max_key_len < 0) - goto out; - - idx = encoding->flags & IW_ENCODE_INDEX; - if (idx) { - if ((idx < 1) || (idx > 4)) - goto out; - idx--; - } else - idx = priv->tx_key; - - encoding->flags = idx + 1; - memset(ext, 0, sizeof(*ext)); - - switch (priv->encode_alg) { - case ORINOCO_ALG_NONE: - ext->alg = IW_ENCODE_ALG_NONE; - ext->key_len = 0; - encoding->flags |= IW_ENCODE_DISABLED; - break; - case ORINOCO_ALG_WEP: - ext->alg = IW_ENCODE_ALG_WEP; - ext->key_len = min(priv->keys[idx].key_len, max_key_len); - memcpy(ext->key, priv->keys[idx].key, ext->key_len); - encoding->flags |= IW_ENCODE_ENABLED; - break; - case ORINOCO_ALG_TKIP: - ext->alg = IW_ENCODE_ALG_TKIP; - ext->key_len = min(priv->keys[idx].key_len, max_key_len); - memcpy(ext->key, priv->keys[idx].key, ext->key_len); - encoding->flags |= IW_ENCODE_ENABLED; - break; - } - - err = 0; - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_set_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct hermes *hw = &priv->hw; - struct iw_param *param = &wrqu->param; - unsigned long flags; - int ret = -EINPROGRESS; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (param->flags & IW_AUTH_INDEX) { - case IW_AUTH_WPA_VERSION: - case IW_AUTH_CIPHER_PAIRWISE: - case IW_AUTH_CIPHER_GROUP: - case IW_AUTH_RX_UNENCRYPTED_EAPOL: - case IW_AUTH_PRIVACY_INVOKED: - case IW_AUTH_DROP_UNENCRYPTED: - /* - * orinoco does not use these parameters - */ - break; - - case IW_AUTH_MFP: - /* Management Frame Protection not supported. - * Only fail if set to required. - */ - if (param->value == IW_AUTH_MFP_REQUIRED) - ret = -EINVAL; - break; - - case IW_AUTH_KEY_MGMT: - /* wl_lkm implies value 2 == PSK for Hermes I - * which ties in with WEXT - * no other hints tho :( - */ - priv->key_mgmt = param->value; - break; - - case IW_AUTH_TKIP_COUNTERMEASURES: - /* When countermeasures are enabled, shut down the - * card; when disabled, re-enable the card. This must - * take effect immediately. - * - * TODO: Make sure that the EAPOL message is getting - * out before card disabled - */ - if (param->value) { - priv->tkip_cm_active = 1; - ret = hermes_disable_port(hw, 0); - } else { - priv->tkip_cm_active = 0; - ret = hermes_enable_port(hw, 0); - } - break; - - case IW_AUTH_80211_AUTH_ALG: - if (param->value & IW_AUTH_ALG_SHARED_KEY) - priv->wep_restrict = 1; - else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) - priv->wep_restrict = 0; - else - ret = -EINVAL; - break; - - case IW_AUTH_WPA_ENABLED: - if (priv->has_wpa) { - priv->wpa_enabled = param->value ? 1 : 0; - } else { - if (param->value) - ret = -EOPNOTSUPP; - /* else silently accept disable of WPA */ - priv->wpa_enabled = 0; - } - break; - - default: - ret = -EOPNOTSUPP; - } - - orinoco_unlock(priv, &flags); - return ret; -} - -static int orinoco_ioctl_get_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct iw_param *param = &wrqu->param; - unsigned long flags; - int ret = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (param->flags & IW_AUTH_INDEX) { - case IW_AUTH_KEY_MGMT: - param->value = priv->key_mgmt; - break; - - case IW_AUTH_TKIP_COUNTERMEASURES: - param->value = priv->tkip_cm_active; - break; - - case IW_AUTH_80211_AUTH_ALG: - if (priv->wep_restrict) - param->value = IW_AUTH_ALG_SHARED_KEY; - else - param->value = IW_AUTH_ALG_OPEN_SYSTEM; - break; - - case IW_AUTH_WPA_ENABLED: - param->value = priv->wpa_enabled; - break; - - default: - ret = -EOPNOTSUPP; - } - - orinoco_unlock(priv, &flags); - return ret; -} - -static int orinoco_ioctl_set_genie(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - u8 *buf; - unsigned long flags; - - /* cut off at IEEE80211_MAX_DATA_LEN */ - if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) || - (wrqu->data.length && (extra == NULL))) - return -EINVAL; - - if (wrqu->data.length) { - buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL); - if (buf == NULL) - return -ENOMEM; - } else - buf = NULL; - - if (orinoco_lock(priv, &flags) != 0) { - kfree(buf); - return -EBUSY; - } - - kfree(priv->wpa_ie); - priv->wpa_ie = buf; - priv->wpa_ie_len = wrqu->data.length; - - if (priv->wpa_ie) { - /* Looks like wl_lkm wants to check the auth alg, and - * somehow pass it to the firmware. - * Instead it just calls the key mgmt rid - * - we do this in set auth. - */ - } - - orinoco_unlock(priv, &flags); - return 0; -} - -static int orinoco_ioctl_get_genie(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - unsigned long flags; - int err = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) { - wrqu->data.length = 0; - goto out; - } - - if (wrqu->data.length < priv->wpa_ie_len) { - err = -E2BIG; - goto out; - } - - wrqu->data.length = priv->wpa_ie_len; - memcpy(extra, priv->wpa_ie, priv->wpa_ie_len); - -out: - orinoco_unlock(priv, &flags); - return err; -} - -static int orinoco_ioctl_set_mlme(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - struct iw_mlme *mlme = (struct iw_mlme *)extra; - unsigned long flags; - int ret = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (mlme->cmd) { - case IW_MLME_DEAUTH: - /* silently ignore */ - break; - - case IW_MLME_DISASSOC: - - ret = orinoco_hw_disassociate(priv, mlme->addr.sa_data, - mlme->reason_code); - break; - - default: - ret = -EOPNOTSUPP; - } - - orinoco_unlock(priv, &flags); - return ret; -} - -static int orinoco_ioctl_reset(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { - printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); - - /* Firmware reset */ - orinoco_reset(&priv->reset_work); - } else { - printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); - - schedule_work(&priv->reset_work); - } - - return 0; -} - -static int orinoco_ioctl_setibssport(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) - -{ - struct orinoco_private *priv = ndev_priv(dev); - int val = *((int *) extra); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - priv->ibss_port = val; - - /* Actually update the mode we are using */ - set_port_type(priv); - - orinoco_unlock(priv, &flags); - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getibssport(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - int *val = (int *) extra; - - *val = priv->ibss_port; - return 0; -} - -static int orinoco_ioctl_setport3(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - int val = *((int *) extra); - int err = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (val) { - case 0: /* Try to do IEEE ad-hoc mode */ - if (!priv->has_ibss) { - err = -EINVAL; - break; - } - priv->prefer_port3 = 0; - - break; - - case 1: /* Try to do Lucent proprietary ad-hoc mode */ - if (!priv->has_port3) { - err = -EINVAL; - break; - } - priv->prefer_port3 = 1; - break; - - default: - err = -EINVAL; - } - - if (!err) { - /* Actually update the mode we are using */ - set_port_type(priv); - err = -EINPROGRESS; - } - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getport3(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - int *val = (int *) extra; - - *val = priv->prefer_port3; - return 0; -} - -static int orinoco_ioctl_setpreamble(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - unsigned long flags; - int val; - - if (!priv->has_preamble) - return -EOPNOTSUPP; - - /* 802.11b has recently defined some short preamble. - * Basically, the Phy header has been reduced in size. - * This increase performance, especially at high rates - * (the preamble is transmitted at 1Mb/s), unfortunately - * this give compatibility troubles... - Jean II */ - val = *((int *) extra); - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (val) - priv->preamble = 1; - else - priv->preamble = 0; - - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getpreamble(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - int *val = (int *) extra; - - if (!priv->has_preamble) - return -EOPNOTSUPP; - - *val = priv->preamble; - return 0; -} - -/* ioctl interface to hermes_read_ltv() - * To use with iwpriv, pass the RID as the token argument, e.g. - * iwpriv get_rid [0xfc00] - * At least Wireless Tools 25 is required to use iwpriv. - * For Wireless Tools 25 and 26 append "dummy" are the end. */ -static int orinoco_ioctl_getrid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct iw_point *data = &wrqu->data; - struct orinoco_private *priv = ndev_priv(dev); - struct hermes *hw = &priv->hw; - int rid = data->flags; - u16 length; - int err; - unsigned long flags; - - /* It's a "get" function, but we don't want users to access the - * WEP key and other raw firmware data */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - if (rid < 0xfc00 || rid > 0xffff) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hw->ops->read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, - extra); - if (err) - goto out; - - data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), - MAX_RID_LEN); - - out: - orinoco_unlock(priv, &flags); - return err; -} - - -/* Commit handler, called after set operations */ -static int orinoco_ioctl_commit(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = ndev_priv(dev); - unsigned long flags; - int err = 0; - - if (!priv->open) - return 0; - - if (orinoco_lock(priv, &flags) != 0) - return err; - - err = orinoco_commit(priv); - - orinoco_unlock(priv, &flags); - return err; -} - -static const struct iw_priv_args orinoco_privtab[] = { - { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, - { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, - { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_port3" }, - { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_port3" }, - { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_preamble" }, - { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_preamble" }, - { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_ibssport" }, - { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_ibssport" }, - { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, - "get_rid" }, -}; - - -/* - * Structures to export the Wireless Handlers - */ - -static const iw_handler orinoco_handler[] = { - IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit), - IW_HANDLER(SIOCGIWNAME, cfg80211_wext_giwname), - IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq), - IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq), - IW_HANDLER(SIOCSIWMODE, cfg80211_wext_siwmode), - IW_HANDLER(SIOCGIWMODE, cfg80211_wext_giwmode), - IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens), - IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens), - IW_HANDLER(SIOCGIWRANGE, cfg80211_wext_giwrange), - IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy), - IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy), - IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy), - IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy), - IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap), - IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap), - IW_HANDLER(SIOCSIWSCAN, cfg80211_wext_siwscan), - IW_HANDLER(SIOCGIWSCAN, cfg80211_wext_giwscan), - IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid), - IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid), - IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate), - IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate), - IW_HANDLER(SIOCSIWRTS, cfg80211_wext_siwrts), - IW_HANDLER(SIOCGIWRTS, cfg80211_wext_giwrts), - IW_HANDLER(SIOCSIWFRAG, cfg80211_wext_siwfrag), - IW_HANDLER(SIOCGIWFRAG, cfg80211_wext_giwfrag), - IW_HANDLER(SIOCGIWRETRY, cfg80211_wext_giwretry), - IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode), - IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode), - IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower), - IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower), - IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie), - IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie), - IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme), - IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth), - IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth), - IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext), - IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext), -}; - - -/* - Added typecasting since we no longer use iwreq_data -- Moustafa - */ -static const iw_handler orinoco_private_handler[] = { - [0] = orinoco_ioctl_reset, - [1] = orinoco_ioctl_reset, - [2] = orinoco_ioctl_setport3, - [3] = orinoco_ioctl_getport3, - [4] = orinoco_ioctl_setpreamble, - [5] = orinoco_ioctl_getpreamble, - [6] = orinoco_ioctl_setibssport, - [7] = orinoco_ioctl_getibssport, - [9] = orinoco_ioctl_getrid, -}; - -const struct iw_handler_def orinoco_handler_def = { - .num_standard = ARRAY_SIZE(orinoco_handler), - .num_private = ARRAY_SIZE(orinoco_private_handler), - .num_private_args = ARRAY_SIZE(orinoco_privtab), - .standard = orinoco_handler, - .private = orinoco_private_handler, - .private_args = orinoco_privtab, - .get_wireless_stats = orinoco_get_wireless_stats, -}; diff --git a/drivers/net/wireless/intersil/orinoco/wext.h b/drivers/net/wireless/intersil/orinoco/wext.h deleted file mode 100644 index 1479f4e26d..0000000000 --- a/drivers/net/wireless/intersil/orinoco/wext.h +++ /dev/null @@ -1,13 +0,0 @@ -/* Wireless extensions support. - * - * See copyright notice in main.c - */ -#ifndef _ORINOCO_WEXT_H_ -#define _ORINOCO_WEXT_H_ - -#include <net/iw_handler.h> - -/* Structure defining all our WEXT handlers */ -extern const struct iw_handler_def orinoco_handler_def; - -#endif /* _ORINOCO_WEXT_H_ */ diff --git a/drivers/net/wireless/intersil/p54/fwio.c b/drivers/net/wireless/intersil/p54/fwio.c index b52cce3811..c4fe70e05b 100644 --- a/drivers/net/wireless/intersil/p54/fwio.c +++ b/drivers/net/wireless/intersil/p54/fwio.c @@ -125,7 +125,7 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) "FW rev %s - Softmac protocol %x.%x\n", fw_version, priv->fw_var >> 8, priv->fw_var & 0xff); snprintf(dev->wiphy->fw_version, sizeof(dev->wiphy->fw_version), - "%s - %x.%x", fw_version, + "%.19s - %x.%x", fw_version, priv->fw_var >> 8, priv->fw_var & 0xff); } diff --git a/drivers/net/wireless/intersil/p54/p54spi.c b/drivers/net/wireless/intersil/p54/p54spi.c index ce0179b8ab..0073b5e0f9 100644 --- a/drivers/net/wireless/intersil/p54/p54spi.c +++ b/drivers/net/wireless/intersil/p54/p54spi.c @@ -700,6 +700,7 @@ static struct spi_driver p54spi_driver = { module_spi_driver(p54spi_driver); +MODULE_DESCRIPTION("Prism54 SPI wireless driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); MODULE_ALIAS("spi:cx3110x"); |