diff options
Diffstat (limited to 'drivers/net/wireless/ti/wl18xx')
20 files changed, 5454 insertions, 0 deletions
diff --git a/drivers/net/wireless/ti/wl18xx/Kconfig b/drivers/net/wireless/ti/wl18xx/Kconfig new file mode 100644 index 0000000000..98fe188dfb --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/Kconfig @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only +config WL18XX + tristate "TI wl18xx support" + depends on MAC80211 + select WLCORE + help + This module adds support for wireless adapters based on TI + WiLink 8 chipsets. diff --git a/drivers/net/wireless/ti/wl18xx/Makefile b/drivers/net/wireless/ti/wl18xx/Makefile new file mode 100644 index 0000000000..aeb42543b0 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o cmd.o event.o + +obj-$(CONFIG_WL18XX) += wl18xx.o diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c new file mode 100644 index 0000000000..d1deef02f4 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/acx.c @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + */ + +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" +#include "../wlcore/acx.h" + +#include "acx.h" +#include "wl18xx.h" + +int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap, + u32 sdio_blk_size, u32 extra_mem_blks, + u32 len_field_size) +{ + struct wl18xx_acx_host_config_bitmap *bitmap_conf; + int ret; + + wl1271_debug(DEBUG_ACX, "acx cfg bitmap %d blk %d spare %d field %d", + host_cfg_bitmap, sdio_blk_size, extra_mem_blks, + len_field_size); + + bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL); + if (!bitmap_conf) { + ret = -ENOMEM; + goto out; + } + + bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap); + bitmap_conf->host_sdio_block_size = cpu_to_le32(sdio_blk_size); + bitmap_conf->extra_mem_blocks = cpu_to_le32(extra_mem_blks); + bitmap_conf->length_field_size = cpu_to_le32(len_field_size); + + ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP, + bitmap_conf, sizeof(*bitmap_conf)); + if (ret < 0) { + wl1271_warning("wl1271 bitmap config opt failed: %d", ret); + goto out; + } + +out: + kfree(bitmap_conf); + + return ret; +} + +int wl18xx_acx_set_checksum_state(struct wl1271 *wl) +{ + struct wl18xx_acx_checksum_state *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx checksum state"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->checksum_state = CHECKSUM_OFFLOAD_ENABLED; + + ret = wl1271_cmd_configure(wl, ACX_CSUM_CONFIG, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("failed to set Tx checksum state: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl18xx_acx_clear_statistics(struct wl1271 *wl) +{ + struct wl18xx_acx_clear_statistics *acx; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx clear statistics"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + ret = wl1271_cmd_configure(wl, ACX_CLEAR_STATISTICS, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("failed to clear firmware statistics: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide) +{ + struct wlcore_peer_ht_operation_mode *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx peer ht operation mode hlid %d bw %d", + hlid, wide); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->hlid = hlid; + acx->bandwidth = wide ? WLCORE_BANDWIDTH_40MHZ : WLCORE_BANDWIDTH_20MHZ; + + ret = wl1271_cmd_configure(wl, ACX_PEER_HT_OPERATION_MODE_CFG, acx, + sizeof(*acx)); + + if (ret < 0) { + wl1271_warning("acx peer ht operation mode failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; + +} + +/* + * this command is basically the same as wl1271_acx_ht_capabilities, + * with the addition of supported rates. they should be unified in + * the next fw api change + */ +int wl18xx_acx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + struct wlcore_acx_peer_cap *acx; + int ret = 0; + u32 ht_capabilites = 0; + + wl1271_debug(DEBUG_ACX, + "acx set cap ht_supp: %d ht_cap: %d rates: 0x%x", + ht_cap->ht_supported, ht_cap->cap, rate_set); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + if (allow_ht_operation && ht_cap->ht_supported) { + /* no need to translate capabilities - use the spec values */ + ht_capabilites = ht_cap->cap; + + /* + * this bit is not employed by the spec but only by FW to + * indicate peer HT support + */ + ht_capabilites |= WL12XX_HT_CAP_HT_OPERATION; + + /* get data from A-MPDU parameters field */ + acx->ampdu_max_length = ht_cap->ampdu_factor; + acx->ampdu_min_spacing = ht_cap->ampdu_density; + } + + acx->hlid = hlid; + acx->ht_capabilites = cpu_to_le32(ht_capabilites); + acx->supported_rates = cpu_to_le32(rate_set); + + ret = wl1271_cmd_configure(wl, ACX_PEER_CAP, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx ht capabilities setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +/* + * When the host is suspended, we don't want to get any fast-link/PSM + * notifications + */ +int wl18xx_acx_interrupt_notify_config(struct wl1271 *wl, + bool action) +{ + struct wl18xx_acx_interrupt_notify *acx; + int ret = 0; + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->enable = action; + ret = wl1271_cmd_configure(wl, ACX_INTERRUPT_NOTIFY, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx interrupt notify setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +/* + * When the host is suspended, we can configure the FW to disable RX BA + * notifications. + */ +int wl18xx_acx_rx_ba_filter(struct wl1271 *wl, bool action) +{ + struct wl18xx_acx_rx_ba_filter *acx; + int ret = 0; + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->enable = (u32)action; + ret = wl1271_cmd_configure(wl, ACX_RX_BA_FILTER, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx rx ba activity filter setting failed: %d", + ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl18xx_acx_ap_sleep(struct wl1271 *wl) +{ + struct wl18xx_priv *priv = wl->priv; + struct acx_ap_sleep_cfg *acx; + struct conf_ap_sleep_settings *conf = &priv->conf.ap_sleep; + int ret; + + wl1271_debug(DEBUG_ACX, "acx config ap sleep"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->idle_duty_cycle = conf->idle_duty_cycle; + acx->connected_duty_cycle = conf->connected_duty_cycle; + acx->max_stations_thresh = conf->max_stations_thresh; + acx->idle_conn_thresh = conf->idle_conn_thresh; + + ret = wl1271_cmd_configure(wl, ACX_AP_SLEEP_CFG, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx config ap-sleep failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl18xx_acx_dynamic_fw_traces(struct wl1271 *wl) +{ + struct acx_dynamic_fw_traces_cfg *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx dynamic fw traces config %d", + wl->dynamic_fw_traces); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->dynamic_fw_traces = cpu_to_le32(wl->dynamic_fw_traces); + + ret = wl1271_cmd_configure(wl, ACX_DYNAMIC_TRACES_CFG, + acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx config dynamic fw traces failed: %d", ret); + goto out; + } +out: + kfree(acx); + return ret; +} + +int wl18xx_acx_time_sync_cfg(struct wl1271 *wl) +{ + struct acx_time_sync_cfg *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx time sync cfg: mode %d, addr: %pM", + wl->conf.sg.params[WL18XX_CONF_SG_TIME_SYNC], + wl->zone_master_mac_addr); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->sync_mode = wl->conf.sg.params[WL18XX_CONF_SG_TIME_SYNC]; + memcpy(acx->zone_mac_addr, wl->zone_master_mac_addr, ETH_ALEN); + + ret = wl1271_cmd_configure(wl, ACX_TIME_SYNC_CFG, + acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx time sync cfg failed: %d", ret); + goto out; + } +out: + kfree(acx); + return ret; +} diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h new file mode 100644 index 0000000000..cba1959119 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/acx.h @@ -0,0 +1,405 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments. All rights reserved. + */ + +#ifndef __WL18XX_ACX_H__ +#define __WL18XX_ACX_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/acx.h" + +enum { + ACX_NS_IPV6_FILTER = 0x0050, + ACX_PEER_HT_OPERATION_MODE_CFG = 0x0051, + ACX_CSUM_CONFIG = 0x0052, + ACX_SIM_CONFIG = 0x0053, + ACX_CLEAR_STATISTICS = 0x0054, + ACX_AUTO_RX_STREAMING = 0x0055, + ACX_PEER_CAP = 0x0056, + ACX_INTERRUPT_NOTIFY = 0x0057, + ACX_RX_BA_FILTER = 0x0058, + ACX_AP_SLEEP_CFG = 0x0059, + ACX_DYNAMIC_TRACES_CFG = 0x005A, + ACX_TIME_SYNC_CFG = 0x005B, +}; + +/* numbers of bits the length field takes (add 1 for the actual number) */ +#define WL18XX_HOST_IF_LEN_SIZE_FIELD 15 + +#define WL18XX_ACX_EVENTS_VECTOR (WL1271_ACX_INTR_WATCHDOG | \ + WL1271_ACX_INTR_INIT_COMPLETE | \ + WL1271_ACX_INTR_EVENT_A | \ + WL1271_ACX_INTR_EVENT_B | \ + WL1271_ACX_INTR_CMD_COMPLETE | \ + WL1271_ACX_INTR_HW_AVAILABLE | \ + WL1271_ACX_INTR_DATA | \ + WL1271_ACX_SW_INTR_WATCHDOG) + +#define WL18XX_INTR_MASK (WL1271_ACX_INTR_WATCHDOG | \ + WL1271_ACX_INTR_EVENT_A | \ + WL1271_ACX_INTR_EVENT_B | \ + WL1271_ACX_INTR_HW_AVAILABLE | \ + WL1271_ACX_INTR_DATA | \ + WL1271_ACX_SW_INTR_WATCHDOG) + +struct wl18xx_acx_host_config_bitmap { + struct acx_header header; + + __le32 host_cfg_bitmap; + + __le32 host_sdio_block_size; + + /* extra mem blocks per frame in TX. */ + __le32 extra_mem_blocks; + + /* + * number of bits of the length field in the first TX word + * (up to 15 - for using the entire 16 bits). + */ + __le32 length_field_size; + +} __packed; + +enum { + CHECKSUM_OFFLOAD_DISABLED = 0, + CHECKSUM_OFFLOAD_ENABLED = 1, + CHECKSUM_OFFLOAD_FAKE_RX = 2, + CHECKSUM_OFFLOAD_INVALID = 0xFF +}; + +struct wl18xx_acx_checksum_state { + struct acx_header header; + + /* enum acx_checksum_state */ + u8 checksum_state; + u8 pad[3]; +} __packed; + + +struct wl18xx_acx_error_stats { + u32 error_frame_non_ctrl; + u32 error_frame_ctrl; + u32 error_frame_during_protection; + u32 null_frame_tx_start; + u32 null_frame_cts_start; + u32 bar_retry; + u32 num_frame_cts_nul_flid; + u32 tx_abort_failure; + u32 tx_resume_failure; + u32 rx_cmplt_db_overflow_cnt; + u32 elp_while_rx_exch; + u32 elp_while_tx_exch; + u32 elp_while_tx; + u32 elp_while_nvic_pending; + u32 rx_excessive_frame_len; + u32 burst_mismatch; + u32 tbc_exch_mismatch; +} __packed; + +#define NUM_OF_RATES_INDEXES 30 +struct wl18xx_acx_tx_stats { + u32 tx_prepared_descs; + u32 tx_cmplt; + u32 tx_template_prepared; + u32 tx_data_prepared; + u32 tx_template_programmed; + u32 tx_data_programmed; + u32 tx_burst_programmed; + u32 tx_starts; + u32 tx_stop; + u32 tx_start_templates; + u32 tx_start_int_templates; + u32 tx_start_fw_gen; + u32 tx_start_data; + u32 tx_start_null_frame; + u32 tx_exch; + u32 tx_retry_template; + u32 tx_retry_data; + u32 tx_retry_per_rate[NUM_OF_RATES_INDEXES]; + u32 tx_exch_pending; + u32 tx_exch_expiry; + u32 tx_done_template; + u32 tx_done_data; + u32 tx_done_int_template; + u32 tx_cfe1; + u32 tx_cfe2; + u32 frag_called; + u32 frag_mpdu_alloc_failed; + u32 frag_init_called; + u32 frag_in_process_called; + u32 frag_tkip_called; + u32 frag_key_not_found; + u32 frag_need_fragmentation; + u32 frag_bad_mblk_num; + u32 frag_failed; + u32 frag_cache_hit; + u32 frag_cache_miss; +} __packed; + +struct wl18xx_acx_rx_stats { + u32 rx_beacon_early_term; + u32 rx_out_of_mpdu_nodes; + u32 rx_hdr_overflow; + u32 rx_dropped_frame; + u32 rx_done_stage; + u32 rx_done; + u32 rx_defrag; + u32 rx_defrag_end; + u32 rx_cmplt; + u32 rx_pre_complt; + u32 rx_cmplt_task; + u32 rx_phy_hdr; + u32 rx_timeout; + u32 rx_rts_timeout; + u32 rx_timeout_wa; + u32 defrag_called; + u32 defrag_init_called; + u32 defrag_in_process_called; + u32 defrag_tkip_called; + u32 defrag_need_defrag; + u32 defrag_decrypt_failed; + u32 decrypt_key_not_found; + u32 defrag_need_decrypt; + u32 rx_tkip_replays; + u32 rx_xfr; +} __packed; + +struct wl18xx_acx_isr_stats { + u32 irqs; +} __packed; + +#define PWR_STAT_MAX_CONT_MISSED_BCNS_SPREAD 10 + +struct wl18xx_acx_pwr_stats { + u32 missing_bcns_cnt; + u32 rcvd_bcns_cnt; + u32 connection_out_of_sync; + u32 cont_miss_bcns_spread[PWR_STAT_MAX_CONT_MISSED_BCNS_SPREAD]; + u32 rcvd_awake_bcns_cnt; + u32 sleep_time_count; + u32 sleep_time_avg; + u32 sleep_cycle_avg; + u32 sleep_percent; + u32 ap_sleep_active_conf; + u32 ap_sleep_user_conf; + u32 ap_sleep_counter; +} __packed; + +struct wl18xx_acx_rx_filter_stats { + u32 beacon_filter; + u32 arp_filter; + u32 mc_filter; + u32 dup_filter; + u32 data_filter; + u32 ibss_filter; + u32 protection_filter; + u32 accum_arp_pend_requests; + u32 max_arp_queue_dep; +} __packed; + +struct wl18xx_acx_rx_rate_stats { + u32 rx_frames_per_rates[50]; +} __packed; + +#define AGGR_STATS_TX_AGG 16 +#define AGGR_STATS_RX_SIZE_LEN 16 + +struct wl18xx_acx_aggr_stats { + u32 tx_agg_rate[AGGR_STATS_TX_AGG]; + u32 tx_agg_len[AGGR_STATS_TX_AGG]; + u32 rx_size[AGGR_STATS_RX_SIZE_LEN]; +} __packed; + +#define PIPE_STATS_HW_FIFO 11 + +struct wl18xx_acx_pipeline_stats { + u32 hs_tx_stat_fifo_int; + u32 hs_rx_stat_fifo_int; + u32 enc_tx_stat_fifo_int; + u32 enc_rx_stat_fifo_int; + u32 rx_complete_stat_fifo_int; + u32 pre_proc_swi; + u32 post_proc_swi; + u32 sec_frag_swi; + u32 pre_to_defrag_swi; + u32 defrag_to_rx_xfer_swi; + u32 dec_packet_in; + u32 dec_packet_in_fifo_full; + u32 dec_packet_out; + u16 pipeline_fifo_full[PIPE_STATS_HW_FIFO]; + u16 padding; +} __packed; + +#define DIVERSITY_STATS_NUM_OF_ANT 2 + +struct wl18xx_acx_diversity_stats { + u32 num_of_packets_per_ant[DIVERSITY_STATS_NUM_OF_ANT]; + u32 total_num_of_toggles; +} __packed; + +struct wl18xx_acx_thermal_stats { + u16 irq_thr_low; + u16 irq_thr_high; + u16 tx_stop; + u16 tx_resume; + u16 false_irq; + u16 adc_source_unexpected; +} __packed; + +#define WL18XX_NUM_OF_CALIBRATIONS_ERRORS 18 +struct wl18xx_acx_calib_failure_stats { + u16 fail_count[WL18XX_NUM_OF_CALIBRATIONS_ERRORS]; + u32 calib_count; +} __packed; + +struct wl18xx_roaming_stats { + s32 rssi_level; +} __packed; + +struct wl18xx_dfs_stats { + u32 num_of_radar_detections; +} __packed; + +struct wl18xx_acx_statistics { + struct acx_header header; + + struct wl18xx_acx_error_stats error; + struct wl18xx_acx_tx_stats tx; + struct wl18xx_acx_rx_stats rx; + struct wl18xx_acx_isr_stats isr; + struct wl18xx_acx_pwr_stats pwr; + struct wl18xx_acx_rx_filter_stats rx_filter; + struct wl18xx_acx_rx_rate_stats rx_rate; + struct wl18xx_acx_aggr_stats aggr_size; + struct wl18xx_acx_pipeline_stats pipeline; + struct wl18xx_acx_diversity_stats diversity; + struct wl18xx_acx_thermal_stats thermal; + struct wl18xx_acx_calib_failure_stats calib; + struct wl18xx_roaming_stats roaming; + struct wl18xx_dfs_stats dfs; +} __packed; + +struct wl18xx_acx_clear_statistics { + struct acx_header header; +}; + +enum wlcore_bandwidth { + WLCORE_BANDWIDTH_20MHZ, + WLCORE_BANDWIDTH_40MHZ, +}; + +struct wlcore_peer_ht_operation_mode { + struct acx_header header; + + u8 hlid; + u8 bandwidth; /* enum wlcore_bandwidth */ + u8 padding[2]; +}; + +/* + * ACX_PEER_CAP + * this struct is very similar to wl1271_acx_ht_capabilities, with the + * addition of supported rates + */ +struct wlcore_acx_peer_cap { + struct acx_header header; + + /* bitmask of capability bits supported by the peer */ + __le32 ht_capabilites; + + /* rates supported by the remote peer */ + __le32 supported_rates; + + /* Indicates to which link these capabilities apply. */ + u8 hlid; + + /* + * This the maximum A-MPDU length supported by the AP. The FW may not + * exceed this length when sending A-MPDUs + */ + u8 ampdu_max_length; + + /* This is the minimal spacing required when sending A-MPDUs to the AP*/ + u8 ampdu_min_spacing; + + u8 padding; +} __packed; + +/* + * ACX_INTERRUPT_NOTIFY + * enable/disable fast-link/PSM notification from FW + */ +struct wl18xx_acx_interrupt_notify { + struct acx_header header; + u32 enable; +}; + +/* + * ACX_RX_BA_FILTER + * enable/disable RX BA filtering in FW + */ +struct wl18xx_acx_rx_ba_filter { + struct acx_header header; + u32 enable; +}; + +struct acx_ap_sleep_cfg { + struct acx_header header; + /* Duty Cycle (20-80% of staying Awake) for IDLE AP + * (0: disable) + */ + u8 idle_duty_cycle; + /* Duty Cycle (20-80% of staying Awake) for Connected AP + * (0: disable) + */ + u8 connected_duty_cycle; + /* Maximum stations that are allowed to be connected to AP + * (255: no limit) + */ + u8 max_stations_thresh; + /* Timeout till enabling the Sleep Mechanism after data stops + * [unit: 100 msec] + */ + u8 idle_conn_thresh; +} __packed; + +/* + * ACX_DYNAMIC_TRACES_CFG + * configure the FW dynamic traces + */ +struct acx_dynamic_fw_traces_cfg { + struct acx_header header; + __le32 dynamic_fw_traces; +} __packed; + +/* + * ACX_TIME_SYNC_CFG + * configure the time sync parameters + */ +struct acx_time_sync_cfg { + struct acx_header header; + u8 sync_mode; + u8 zone_mac_addr[ETH_ALEN]; + u8 padding[1]; +} __packed; + +int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap, + u32 sdio_blk_size, u32 extra_mem_blks, + u32 len_field_size); +int wl18xx_acx_set_checksum_state(struct wl1271 *wl); +int wl18xx_acx_clear_statistics(struct wl1271 *wl); +int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide); +int wl18xx_acx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid); +int wl18xx_acx_interrupt_notify_config(struct wl1271 *wl, bool action); +int wl18xx_acx_rx_ba_filter(struct wl1271 *wl, bool action); +int wl18xx_acx_ap_sleep(struct wl1271 *wl); +int wl18xx_acx_dynamic_fw_traces(struct wl1271 *wl); +int wl18xx_acx_time_sync_cfg(struct wl1271 *wl); + +#endif /* __WL18XX_ACX_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/cmd.c b/drivers/net/wireless/ti/wl18xx/cmd.c new file mode 100644 index 0000000000..5f8620d900 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/cmd.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + */ + +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" +#include "../wlcore/hw_ops.h" + +#include "cmd.h" + +int wl18xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch) +{ + struct wl18xx_cmd_channel_switch *cmd; + u32 supported_rates; + int ret; + + wl1271_debug(DEBUG_ACX, "cmd channel switch (count=%d)", + ch_switch->count); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + cmd->channel = ch_switch->chandef.chan->hw_value; + cmd->switch_time = ch_switch->count; + cmd->stop_tx = ch_switch->block_tx; + + switch (ch_switch->chandef.chan->band) { + case NL80211_BAND_2GHZ: + cmd->band = WLCORE_BAND_2_4GHZ; + break; + case NL80211_BAND_5GHZ: + cmd->band = WLCORE_BAND_5GHZ; + break; + default: + wl1271_error("invalid channel switch band: %d", + ch_switch->chandef.chan->band); + ret = -EINVAL; + goto out_free; + } + + supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES; + if (wlvif->bss_type == BSS_TYPE_STA_BSS) + supported_rates |= wlcore_hw_sta_get_ap_rate_mask(wl, wlvif); + else + supported_rates |= + wlcore_hw_ap_get_mimo_wide_rate_mask(wl, wlvif); + if (wlvif->p2p) + supported_rates &= ~CONF_TX_CCK_RATES; + cmd->local_supported_rates = cpu_to_le32(supported_rates); + cmd->channel_type = wlvif->channel_type; + + ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send channel switch command"); + goto out_free; + } + +out_free: + kfree(cmd); +out: + return ret; +} + +int wl18xx_cmd_smart_config_start(struct wl1271 *wl, u32 group_bitmap) +{ + struct wl18xx_cmd_smart_config_start *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd smart config start group_bitmap=0x%x", + group_bitmap); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->group_id_bitmask = cpu_to_le32(group_bitmap); + + ret = wl1271_cmd_send(wl, CMD_SMART_CONFIG_START, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send smart config start command"); + goto out_free; + } + +out_free: + kfree(cmd); +out: + return ret; +} + +int wl18xx_cmd_smart_config_stop(struct wl1271 *wl) +{ + struct wl1271_cmd_header *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd smart config stop"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + ret = wl1271_cmd_send(wl, CMD_SMART_CONFIG_STOP, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send smart config stop command"); + goto out_free; + } + +out_free: + kfree(cmd); +out: + return ret; +} + +int wl18xx_cmd_smart_config_set_group_key(struct wl1271 *wl, u16 group_id, + u8 key_len, u8 *key) +{ + struct wl18xx_cmd_smart_config_set_group_key *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd smart config set group key id=0x%x", + group_id); + + if (key_len != sizeof(cmd->key)) { + wl1271_error("invalid group key size: %d", key_len); + return -E2BIG; + } + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->group_id = cpu_to_le32(group_id); + memcpy(cmd->key, key, key_len); + + ret = wl1271_cmd_send(wl, CMD_SMART_CONFIG_SET_GROUP_KEY, cmd, + sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send smart config set group key cmd"); + goto out_free; + } + +out_free: + kfree(cmd); +out: + return ret; +} + +int wl18xx_cmd_set_cac(struct wl1271 *wl, struct wl12xx_vif *wlvif, bool start) +{ + struct wlcore_cmd_cac_start *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd cac (channel %d) %s", + wlvif->channel, start ? "start" : "stop"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->role_id = wlvif->role_id; + cmd->channel = wlvif->channel; + if (wlvif->band == NL80211_BAND_5GHZ) + cmd->band = WLCORE_BAND_5GHZ; + cmd->bandwidth = wlcore_get_native_channel_type(wlvif->channel_type); + + ret = wl1271_cmd_send(wl, + start ? CMD_CAC_START : CMD_CAC_STOP, + cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send cac command"); + goto out_free; + } + +out_free: + kfree(cmd); + return ret; +} + +int wl18xx_cmd_radar_detection_debug(struct wl1271 *wl, u8 channel) +{ + struct wl18xx_cmd_dfs_radar_debug *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd radar detection debug (chan %d)", + channel); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->channel = channel; + + ret = wl1271_cmd_send(wl, CMD_DFS_RADAR_DETECTION_DEBUG, + cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send radar detection debug command"); + goto out_free; + } + +out_free: + kfree(cmd); + return ret; +} + +int wl18xx_cmd_dfs_master_restart(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl18xx_cmd_dfs_master_restart *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd dfs master restart (role %d)", + wlvif->role_id); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->role_id = wlvif->role_id; + + ret = wl1271_cmd_send(wl, CMD_DFS_MASTER_RESTART, + cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send dfs master restart command"); + goto out_free; + } +out_free: + kfree(cmd); + return ret; +} diff --git a/drivers/net/wireless/ti/wl18xx/cmd.h b/drivers/net/wireless/ti/wl18xx/cmd.h new file mode 100644 index 0000000000..56c8bea48a --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/cmd.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments. All rights reserved. + */ + +#ifndef __WL18XX_CMD_H__ +#define __WL18XX_CMD_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/acx.h" + +struct wl18xx_cmd_channel_switch { + struct wl1271_cmd_header header; + + u8 role_id; + + /* The new serving channel */ + u8 channel; + /* Relative time of the serving channel switch in TBTT units */ + u8 switch_time; + /* Stop the role TX, should expect it after radar detection */ + u8 stop_tx; + + __le32 local_supported_rates; + + u8 channel_type; + u8 band; + + u8 padding[2]; +} __packed; + +struct wl18xx_cmd_smart_config_start { + struct wl1271_cmd_header header; + + __le32 group_id_bitmask; +} __packed; + +struct wl18xx_cmd_smart_config_set_group_key { + struct wl1271_cmd_header header; + + __le32 group_id; + + u8 key[16]; +} __packed; + +struct wl18xx_cmd_dfs_radar_debug { + struct wl1271_cmd_header header; + + u8 channel; + u8 padding[3]; +} __packed; + +struct wl18xx_cmd_dfs_master_restart { + struct wl1271_cmd_header header; + + u8 role_id; + u8 padding[3]; +} __packed; + +/* cac_start and cac_stop share the same params */ +struct wlcore_cmd_cac_start { + struct wl1271_cmd_header header; + + u8 role_id; + u8 channel; + u8 band; + u8 bandwidth; +} __packed; + +int wl18xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch); +int wl18xx_cmd_smart_config_start(struct wl1271 *wl, u32 group_bitmap); +int wl18xx_cmd_smart_config_stop(struct wl1271 *wl); +int wl18xx_cmd_smart_config_set_group_key(struct wl1271 *wl, u16 group_id, + u8 key_len, u8 *key); +int wl18xx_cmd_set_cac(struct wl1271 *wl, struct wl12xx_vif *wlvif, bool start); +int wl18xx_cmd_radar_detection_debug(struct wl1271 *wl, u8 channel); +int wl18xx_cmd_dfs_master_restart(struct wl1271 *wl, struct wl12xx_vif *wlvif); +#endif diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h new file mode 100644 index 0000000000..9621bc2475 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -0,0 +1,218 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + */ + +#ifndef __WL18XX_CONF_H__ +#define __WL18XX_CONF_H__ + +#define WL18XX_CONF_MAGIC 0x10e100ca +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0007) +#define WL18XX_CONF_MASK 0x0000ffff +#define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ + sizeof(struct wl18xx_priv_conf)) + +#define NUM_OF_CHANNELS_11_ABG 150 +#define NUM_OF_CHANNELS_11_P 7 +#define SRF_TABLE_LEN 16 +#define PIN_MUXING_SIZE 2 +#define WL18XX_TRACE_LOSS_GAPS_TX 10 +#define WL18XX_TRACE_LOSS_GAPS_RX 18 + +struct wl18xx_mac_and_phy_params { + u8 phy_standalone; + u8 spare0; + u8 enable_clpc; + u8 enable_tx_low_pwr_on_siso_rdl; + u8 auto_detect; + u8 dedicated_fem; + + u8 low_band_component; + + /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ + u8 low_band_component_type; + + u8 high_band_component; + + /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ + u8 high_band_component_type; + u8 number_of_assembled_ant2_4; + u8 number_of_assembled_ant5; + u8 pin_muxing_platform_options[PIN_MUXING_SIZE]; + u8 external_pa_dc2dc; + u8 tcxo_ldo_voltage; + u8 xtal_itrim_val; + u8 srf_state; + u8 srf1[SRF_TABLE_LEN]; + u8 srf2[SRF_TABLE_LEN]; + u8 srf3[SRF_TABLE_LEN]; + u8 io_configuration; + u8 sdio_configuration; + u8 settings; + u8 rx_profile; + u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG]; + u8 pwr_limit_reference_11_abg; + u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; + u8 pwr_limit_reference_11p; + u8 spare1; + u8 per_chan_bo_mode_11_abg[13]; + u8 per_chan_bo_mode_11_p[4]; + u8 primary_clock_setting_time; + u8 clock_valid_on_wake_up; + u8 secondary_clock_setting_time; + u8 board_type; + /* enable point saturation */ + u8 psat; + /* low/medium/high Tx power in dBm for STA-HP BG */ + s8 low_power_val; + s8 med_power_val; + s8 high_power_val; + s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX]; + s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX]; + u8 tx_rf_margin; + /* low/medium/high Tx power in dBm for other role */ + s8 low_power_val_2nd; + s8 med_power_val_2nd; + s8 high_power_val_2nd; + + u8 padding[1]; +} __packed; + +enum wl18xx_ht_mode { + /* Default - use MIMO, fallback to SISO20 */ + HT_MODE_DEFAULT = 0, + + /* Wide - use SISO40 */ + HT_MODE_WIDE = 1, + + /* Use SISO20 */ + HT_MODE_SISO20 = 2, +}; + +struct wl18xx_ht_settings { + /* DEFAULT / WIDE / SISO20 */ + u8 mode; +} __packed; + +struct conf_ap_sleep_settings { + /* Duty Cycle (20-80% of staying Awake) for IDLE AP + * (0: disable) + */ + u8 idle_duty_cycle; + /* Duty Cycle (20-80% of staying Awake) for Connected AP + * (0: disable) + */ + u8 connected_duty_cycle; + /* Maximum stations that are allowed to be connected to AP + * (255: no limit) + */ + u8 max_stations_thresh; + /* Timeout till enabling the Sleep Mechanism after data stops + * [unit: 100 msec] + */ + u8 idle_conn_thresh; +} __packed; + +struct wl18xx_priv_conf { + /* Module params structures */ + struct wl18xx_ht_settings ht; + + /* this structure is copied wholesale to FW */ + struct wl18xx_mac_and_phy_params phy; + + struct conf_ap_sleep_settings ap_sleep; +} __packed; + +enum wl18xx_sg_params { + WL18XX_CONF_SG_PARAM_0 = 0, + + /* Configuration Parameters */ + WL18XX_CONF_SG_ANTENNA_CONFIGURATION, + WL18XX_CONF_SG_ZIGBEE_COEX, + WL18XX_CONF_SG_TIME_SYNC, + + WL18XX_CONF_SG_PARAM_4, + WL18XX_CONF_SG_PARAM_5, + WL18XX_CONF_SG_PARAM_6, + WL18XX_CONF_SG_PARAM_7, + WL18XX_CONF_SG_PARAM_8, + WL18XX_CONF_SG_PARAM_9, + WL18XX_CONF_SG_PARAM_10, + WL18XX_CONF_SG_PARAM_11, + WL18XX_CONF_SG_PARAM_12, + WL18XX_CONF_SG_PARAM_13, + WL18XX_CONF_SG_PARAM_14, + WL18XX_CONF_SG_PARAM_15, + WL18XX_CONF_SG_PARAM_16, + WL18XX_CONF_SG_PARAM_17, + WL18XX_CONF_SG_PARAM_18, + WL18XX_CONF_SG_PARAM_19, + WL18XX_CONF_SG_PARAM_20, + WL18XX_CONF_SG_PARAM_21, + WL18XX_CONF_SG_PARAM_22, + WL18XX_CONF_SG_PARAM_23, + WL18XX_CONF_SG_PARAM_24, + WL18XX_CONF_SG_PARAM_25, + + /* Active Scan Parameters */ + WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ, + WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, + + WL18XX_CONF_SG_PARAM_28, + + /* Passive Scan Parameters */ + WL18XX_CONF_SG_PARAM_29, + WL18XX_CONF_SG_PARAM_30, + WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, + + /* Passive Scan in Dual Antenna Parameters */ + WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN, + WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN, + WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN, + + /* General Parameters */ + WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO, + WL18XX_CONF_SG_PARAM_36, + WL18XX_CONF_SG_BEACON_MISS_PERCENT, + WL18XX_CONF_SG_PARAM_38, + WL18XX_CONF_SG_RXT, + WL18XX_CONF_SG_UNUSED, + WL18XX_CONF_SG_ADAPTIVE_RXT_TXT, + WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP, + WL18XX_CONF_SG_HV3_MAX_SERVED, + WL18XX_CONF_SG_PARAM_44, + WL18XX_CONF_SG_PARAM_45, + WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD, + WL18XX_CONF_SG_GEMINI_PARAM_47, + WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME, + + /* AP Parameters */ + WL18XX_CONF_SG_AP_BEACON_MISS_TX, + WL18XX_CONF_SG_PARAM_50, + WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL, + WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME, + WL18XX_CONF_SG_PARAM_53, + WL18XX_CONF_SG_PARAM_54, + + /* CTS Diluting Parameters */ + WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH, + WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER, + + WL18XX_CONF_SG_TEMP_PARAM_1, + WL18XX_CONF_SG_TEMP_PARAM_2, + WL18XX_CONF_SG_TEMP_PARAM_3, + WL18XX_CONF_SG_TEMP_PARAM_4, + WL18XX_CONF_SG_TEMP_PARAM_5, + WL18XX_CONF_SG_TEMP_PARAM_6, + WL18XX_CONF_SG_TEMP_PARAM_7, + WL18XX_CONF_SG_TEMP_PARAM_8, + WL18XX_CONF_SG_TEMP_PARAM_9, + WL18XX_CONF_SG_TEMP_PARAM_10, + + WL18XX_CONF_SG_PARAMS_MAX, + WL18XX_CONF_SG_PARAMS_ALL = 0xff +}; + +#endif /* __WL18XX_CONF_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/debugfs.c b/drivers/net/wireless/ti/wl18xx/debugfs.c new file mode 100644 index 0000000000..80fbf740fe --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/debugfs.c @@ -0,0 +1,563 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file is part of wl18xx + * + * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2011-2012 Texas Instruments + */ + +#include <linux/pm_runtime.h> + +#include "../wlcore/debugfs.h" +#include "../wlcore/wlcore.h" +#include "../wlcore/debug.h" +#include "../wlcore/ps.h" + +#include "wl18xx.h" +#include "acx.h" +#include "cmd.h" +#include "debugfs.h" + +#define WL18XX_DEBUGFS_FWSTATS_FILE(a, b, c) \ + DEBUGFS_FWSTATS_FILE(a, b, c, wl18xx_acx_statistics) +#define WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(a, b, c) \ + DEBUGFS_FWSTATS_FILE_ARRAY(a, b, c, wl18xx_acx_statistics) + + +WL18XX_DEBUGFS_FWSTATS_FILE(error, error_frame_non_ctrl, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, error_frame_ctrl, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, error_frame_during_protection, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, null_frame_tx_start, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, null_frame_cts_start, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, bar_retry, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, num_frame_cts_nul_flid, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, tx_abort_failure, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, tx_resume_failure, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, rx_cmplt_db_overflow_cnt, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, elp_while_rx_exch, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, elp_while_tx_exch, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, elp_while_tx, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, elp_while_nvic_pending, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, rx_excessive_frame_len, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, burst_mismatch, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(error, tbc_exch_mismatch, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_prepared_descs, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_cmplt, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_template_prepared, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_data_prepared, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_template_programmed, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_data_programmed, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_burst_programmed, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_starts, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_stop, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_start_templates, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_start_int_templates, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_start_fw_gen, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_start_data, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_start_null_frame, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_exch, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_retry_template, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_retry_data, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(tx, tx_retry_per_rate, + NUM_OF_RATES_INDEXES); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_exch_pending, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_exch_expiry, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_done_template, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_done_data, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_done_int_template, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_cfe1, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, tx_cfe2, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_called, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_mpdu_alloc_failed, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_init_called, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_in_process_called, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_tkip_called, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_key_not_found, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_need_fragmentation, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_bad_mblk_num, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_failed, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_cache_hit, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(tx, frag_cache_miss, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_beacon_early_term, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_out_of_mpdu_nodes, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_hdr_overflow, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_dropped_frame, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_done, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_defrag, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_defrag_end, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_cmplt, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_pre_complt, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_cmplt_task, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_phy_hdr, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_timeout, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_rts_timeout, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_timeout_wa, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, defrag_called, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, defrag_init_called, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, defrag_in_process_called, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, defrag_tkip_called, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, defrag_need_defrag, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, defrag_decrypt_failed, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, decrypt_key_not_found, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, defrag_need_decrypt, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_tkip_replays, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx, rx_xfr, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE(isr, irqs, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, missing_bcns_cnt, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, rcvd_bcns_cnt, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, connection_out_of_sync, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(pwr, cont_miss_bcns_spread, + PWR_STAT_MAX_CONT_MISSED_BCNS_SPREAD); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_bcns_cnt, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, sleep_time_count, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, sleep_time_avg, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, sleep_cycle_avg, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, sleep_percent, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, ap_sleep_active_conf, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, ap_sleep_user_conf, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pwr, ap_sleep_counter, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, beacon_filter, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, arp_filter, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, mc_filter, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, dup_filter, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, data_filter, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, ibss_filter, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, protection_filter, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, accum_arp_pend_requests, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, max_arp_queue_dep, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(rx_rate, rx_frames_per_rates, 50); + +WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(aggr_size, tx_agg_rate, + AGGR_STATS_TX_AGG); +WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(aggr_size, tx_agg_len, + AGGR_STATS_TX_AGG); +WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(aggr_size, rx_size, + AGGR_STATS_RX_SIZE_LEN); + +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, hs_tx_stat_fifo_int, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, enc_tx_stat_fifo_int, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, enc_rx_stat_fifo_int, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, rx_complete_stat_fifo_int, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, pre_proc_swi, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, post_proc_swi, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, sec_frag_swi, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, pre_to_defrag_swi, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, defrag_to_rx_xfer_swi, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, dec_packet_in, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, dec_packet_in_fifo_full, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(pipeline, dec_packet_out, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(pipeline, pipeline_fifo_full, + PIPE_STATS_HW_FIFO); + +WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(diversity, num_of_packets_per_ant, + DIVERSITY_STATS_NUM_OF_ANT); +WL18XX_DEBUGFS_FWSTATS_FILE(diversity, total_num_of_toggles, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE(thermal, irq_thr_low, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(thermal, irq_thr_high, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(thermal, tx_stop, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(thermal, tx_resume, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(thermal, false_irq, "%u"); +WL18XX_DEBUGFS_FWSTATS_FILE(thermal, adc_source_unexpected, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(calib, fail_count, + WL18XX_NUM_OF_CALIBRATIONS_ERRORS); +WL18XX_DEBUGFS_FWSTATS_FILE(calib, calib_count, "%u"); + +WL18XX_DEBUGFS_FWSTATS_FILE(roaming, rssi_level, "%d"); + +WL18XX_DEBUGFS_FWSTATS_FILE(dfs, num_of_radar_detections, "%d"); + +static ssize_t conf_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + struct wl18xx_priv *priv = wl->priv; + struct wlcore_conf_header header; + char *buf, *pos; + size_t len; + int ret; + + len = WL18XX_CONF_SIZE; + buf = kmalloc(len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + header.magic = cpu_to_le32(WL18XX_CONF_MAGIC); + header.version = cpu_to_le32(WL18XX_CONF_VERSION); + header.checksum = 0; + + mutex_lock(&wl->mutex); + + pos = buf; + memcpy(pos, &header, sizeof(header)); + pos += sizeof(header); + memcpy(pos, &wl->conf, sizeof(wl->conf)); + pos += sizeof(wl->conf); + memcpy(pos, &priv->conf, sizeof(priv->conf)); + + mutex_unlock(&wl->mutex); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + + kfree(buf); + return ret; +} + +static const struct file_operations conf_ops = { + .read = conf_read, + .open = simple_open, + .llseek = default_llseek, +}; + +static ssize_t clear_fw_stats_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + int ret; + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + ret = wl18xx_acx_clear_statistics(wl); + if (ret < 0) { + count = ret; + goto out; + } +out: + mutex_unlock(&wl->mutex); + return count; +} + +static const struct file_operations clear_fw_stats_ops = { + .write = clear_fw_stats_write, + .open = simple_open, + .llseek = default_llseek, +}; + +static ssize_t radar_detection_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + int ret; + u8 channel; + + ret = kstrtou8_from_user(user_buf, count, 10, &channel); + if (ret < 0) { + wl1271_warning("illegal channel"); + return -EINVAL; + } + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + ret = pm_runtime_resume_and_get(wl->dev); + if (ret < 0) + goto out; + + ret = wl18xx_cmd_radar_detection_debug(wl, channel); + if (ret < 0) + count = ret; + + pm_runtime_mark_last_busy(wl->dev); + pm_runtime_put_autosuspend(wl->dev); +out: + mutex_unlock(&wl->mutex); + return count; +} + +static const struct file_operations radar_detection_ops = { + .write = radar_detection_write, + .open = simple_open, + .llseek = default_llseek, +}; + +static ssize_t dynamic_fw_traces_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + unsigned long value; + int ret; + + ret = kstrtoul_from_user(user_buf, count, 0, &value); + if (ret < 0) + return ret; + + mutex_lock(&wl->mutex); + + wl->dynamic_fw_traces = value; + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + ret = pm_runtime_resume_and_get(wl->dev); + if (ret < 0) + goto out; + + ret = wl18xx_acx_dynamic_fw_traces(wl); + if (ret < 0) + count = ret; + + pm_runtime_mark_last_busy(wl->dev); + pm_runtime_put_autosuspend(wl->dev); +out: + mutex_unlock(&wl->mutex); + return count; +} + +static ssize_t dynamic_fw_traces_read(struct file *file, + char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + return wl1271_format_buffer(userbuf, count, ppos, + "%d\n", wl->dynamic_fw_traces); +} + +static const struct file_operations dynamic_fw_traces_ops = { + .read = dynamic_fw_traces_read, + .write = dynamic_fw_traces_write, + .open = simple_open, + .llseek = default_llseek, +}; + +#ifdef CONFIG_CFG80211_CERTIFICATION_ONUS +static ssize_t radar_debug_mode_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + struct wl12xx_vif *wlvif; + unsigned long value; + int ret; + + ret = kstrtoul_from_user(user_buf, count, 10, &value); + if (ret < 0) { + wl1271_warning("illegal radar_debug_mode value!"); + return -EINVAL; + } + + /* valid values: 0/1 */ + if (!(value == 0 || value == 1)) { + wl1271_warning("value is not in valid!"); + return -EINVAL; + } + + mutex_lock(&wl->mutex); + + wl->radar_debug_mode = value; + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + ret = pm_runtime_resume_and_get(wl->dev); + if (ret < 0) + goto out; + + wl12xx_for_each_wlvif_ap(wl, wlvif) { + wlcore_cmd_generic_cfg(wl, wlvif, + WLCORE_CFG_FEATURE_RADAR_DEBUG, + wl->radar_debug_mode, 0); + } + + pm_runtime_mark_last_busy(wl->dev); + pm_runtime_put_autosuspend(wl->dev); +out: + mutex_unlock(&wl->mutex); + return count; +} + +static ssize_t radar_debug_mode_read(struct file *file, + char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + + return wl1271_format_buffer(userbuf, count, ppos, + "%d\n", wl->radar_debug_mode); +} + +static const struct file_operations radar_debug_mode_ops = { + .write = radar_debug_mode_write, + .read = radar_debug_mode_read, + .open = simple_open, + .llseek = default_llseek, +}; +#endif /* CFG80211_CERTIFICATION_ONUS */ + +int wl18xx_debugfs_add_files(struct wl1271 *wl, + struct dentry *rootdir) +{ + struct dentry *stats, *moddir; + + moddir = debugfs_create_dir(KBUILD_MODNAME, rootdir); + stats = debugfs_create_dir("fw_stats", moddir); + + DEBUGFS_ADD(clear_fw_stats, stats); + + DEBUGFS_FWSTATS_ADD(error, error_frame_non_ctrl); + DEBUGFS_FWSTATS_ADD(error, error_frame_ctrl); + DEBUGFS_FWSTATS_ADD(error, error_frame_during_protection); + DEBUGFS_FWSTATS_ADD(error, null_frame_tx_start); + DEBUGFS_FWSTATS_ADD(error, null_frame_cts_start); + DEBUGFS_FWSTATS_ADD(error, bar_retry); + DEBUGFS_FWSTATS_ADD(error, num_frame_cts_nul_flid); + DEBUGFS_FWSTATS_ADD(error, tx_abort_failure); + DEBUGFS_FWSTATS_ADD(error, tx_resume_failure); + DEBUGFS_FWSTATS_ADD(error, rx_cmplt_db_overflow_cnt); + DEBUGFS_FWSTATS_ADD(error, elp_while_rx_exch); + DEBUGFS_FWSTATS_ADD(error, elp_while_tx_exch); + DEBUGFS_FWSTATS_ADD(error, elp_while_tx); + DEBUGFS_FWSTATS_ADD(error, elp_while_nvic_pending); + DEBUGFS_FWSTATS_ADD(error, rx_excessive_frame_len); + DEBUGFS_FWSTATS_ADD(error, burst_mismatch); + DEBUGFS_FWSTATS_ADD(error, tbc_exch_mismatch); + + DEBUGFS_FWSTATS_ADD(tx, tx_prepared_descs); + DEBUGFS_FWSTATS_ADD(tx, tx_cmplt); + DEBUGFS_FWSTATS_ADD(tx, tx_template_prepared); + DEBUGFS_FWSTATS_ADD(tx, tx_data_prepared); + DEBUGFS_FWSTATS_ADD(tx, tx_template_programmed); + DEBUGFS_FWSTATS_ADD(tx, tx_data_programmed); + DEBUGFS_FWSTATS_ADD(tx, tx_burst_programmed); + DEBUGFS_FWSTATS_ADD(tx, tx_starts); + DEBUGFS_FWSTATS_ADD(tx, tx_stop); + DEBUGFS_FWSTATS_ADD(tx, tx_start_templates); + DEBUGFS_FWSTATS_ADD(tx, tx_start_int_templates); + DEBUGFS_FWSTATS_ADD(tx, tx_start_fw_gen); + DEBUGFS_FWSTATS_ADD(tx, tx_start_data); + DEBUGFS_FWSTATS_ADD(tx, tx_start_null_frame); + DEBUGFS_FWSTATS_ADD(tx, tx_exch); + DEBUGFS_FWSTATS_ADD(tx, tx_retry_template); + DEBUGFS_FWSTATS_ADD(tx, tx_retry_data); + DEBUGFS_FWSTATS_ADD(tx, tx_retry_per_rate); + DEBUGFS_FWSTATS_ADD(tx, tx_exch_pending); + DEBUGFS_FWSTATS_ADD(tx, tx_exch_expiry); + DEBUGFS_FWSTATS_ADD(tx, tx_done_template); + DEBUGFS_FWSTATS_ADD(tx, tx_done_data); + DEBUGFS_FWSTATS_ADD(tx, tx_done_int_template); + DEBUGFS_FWSTATS_ADD(tx, tx_cfe1); + DEBUGFS_FWSTATS_ADD(tx, tx_cfe2); + DEBUGFS_FWSTATS_ADD(tx, frag_called); + DEBUGFS_FWSTATS_ADD(tx, frag_mpdu_alloc_failed); + DEBUGFS_FWSTATS_ADD(tx, frag_init_called); + DEBUGFS_FWSTATS_ADD(tx, frag_in_process_called); + DEBUGFS_FWSTATS_ADD(tx, frag_tkip_called); + DEBUGFS_FWSTATS_ADD(tx, frag_key_not_found); + DEBUGFS_FWSTATS_ADD(tx, frag_need_fragmentation); + DEBUGFS_FWSTATS_ADD(tx, frag_bad_mblk_num); + DEBUGFS_FWSTATS_ADD(tx, frag_failed); + DEBUGFS_FWSTATS_ADD(tx, frag_cache_hit); + DEBUGFS_FWSTATS_ADD(tx, frag_cache_miss); + + DEBUGFS_FWSTATS_ADD(rx, rx_beacon_early_term); + DEBUGFS_FWSTATS_ADD(rx, rx_out_of_mpdu_nodes); + DEBUGFS_FWSTATS_ADD(rx, rx_hdr_overflow); + DEBUGFS_FWSTATS_ADD(rx, rx_dropped_frame); + DEBUGFS_FWSTATS_ADD(rx, rx_done); + DEBUGFS_FWSTATS_ADD(rx, rx_defrag); + DEBUGFS_FWSTATS_ADD(rx, rx_defrag_end); + DEBUGFS_FWSTATS_ADD(rx, rx_cmplt); + DEBUGFS_FWSTATS_ADD(rx, rx_pre_complt); + DEBUGFS_FWSTATS_ADD(rx, rx_cmplt_task); + DEBUGFS_FWSTATS_ADD(rx, rx_phy_hdr); + DEBUGFS_FWSTATS_ADD(rx, rx_timeout); + DEBUGFS_FWSTATS_ADD(rx, rx_rts_timeout); + DEBUGFS_FWSTATS_ADD(rx, rx_timeout_wa); + DEBUGFS_FWSTATS_ADD(rx, defrag_called); + DEBUGFS_FWSTATS_ADD(rx, defrag_init_called); + DEBUGFS_FWSTATS_ADD(rx, defrag_in_process_called); + DEBUGFS_FWSTATS_ADD(rx, defrag_tkip_called); + DEBUGFS_FWSTATS_ADD(rx, defrag_need_defrag); + DEBUGFS_FWSTATS_ADD(rx, defrag_decrypt_failed); + DEBUGFS_FWSTATS_ADD(rx, decrypt_key_not_found); + DEBUGFS_FWSTATS_ADD(rx, defrag_need_decrypt); + DEBUGFS_FWSTATS_ADD(rx, rx_tkip_replays); + DEBUGFS_FWSTATS_ADD(rx, rx_xfr); + + DEBUGFS_FWSTATS_ADD(isr, irqs); + + DEBUGFS_FWSTATS_ADD(pwr, missing_bcns_cnt); + DEBUGFS_FWSTATS_ADD(pwr, rcvd_bcns_cnt); + DEBUGFS_FWSTATS_ADD(pwr, connection_out_of_sync); + DEBUGFS_FWSTATS_ADD(pwr, cont_miss_bcns_spread); + DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_bcns_cnt); + DEBUGFS_FWSTATS_ADD(pwr, sleep_time_count); + DEBUGFS_FWSTATS_ADD(pwr, sleep_time_avg); + DEBUGFS_FWSTATS_ADD(pwr, sleep_cycle_avg); + DEBUGFS_FWSTATS_ADD(pwr, sleep_percent); + DEBUGFS_FWSTATS_ADD(pwr, ap_sleep_active_conf); + DEBUGFS_FWSTATS_ADD(pwr, ap_sleep_user_conf); + DEBUGFS_FWSTATS_ADD(pwr, ap_sleep_counter); + + DEBUGFS_FWSTATS_ADD(rx_filter, beacon_filter); + DEBUGFS_FWSTATS_ADD(rx_filter, arp_filter); + DEBUGFS_FWSTATS_ADD(rx_filter, mc_filter); + DEBUGFS_FWSTATS_ADD(rx_filter, dup_filter); + DEBUGFS_FWSTATS_ADD(rx_filter, data_filter); + DEBUGFS_FWSTATS_ADD(rx_filter, ibss_filter); + DEBUGFS_FWSTATS_ADD(rx_filter, protection_filter); + DEBUGFS_FWSTATS_ADD(rx_filter, accum_arp_pend_requests); + DEBUGFS_FWSTATS_ADD(rx_filter, max_arp_queue_dep); + + DEBUGFS_FWSTATS_ADD(rx_rate, rx_frames_per_rates); + + DEBUGFS_FWSTATS_ADD(aggr_size, tx_agg_rate); + DEBUGFS_FWSTATS_ADD(aggr_size, tx_agg_len); + DEBUGFS_FWSTATS_ADD(aggr_size, rx_size); + + DEBUGFS_FWSTATS_ADD(pipeline, hs_tx_stat_fifo_int); + DEBUGFS_FWSTATS_ADD(pipeline, enc_tx_stat_fifo_int); + DEBUGFS_FWSTATS_ADD(pipeline, enc_rx_stat_fifo_int); + DEBUGFS_FWSTATS_ADD(pipeline, rx_complete_stat_fifo_int); + DEBUGFS_FWSTATS_ADD(pipeline, pre_proc_swi); + DEBUGFS_FWSTATS_ADD(pipeline, post_proc_swi); + DEBUGFS_FWSTATS_ADD(pipeline, sec_frag_swi); + DEBUGFS_FWSTATS_ADD(pipeline, pre_to_defrag_swi); + DEBUGFS_FWSTATS_ADD(pipeline, defrag_to_rx_xfer_swi); + DEBUGFS_FWSTATS_ADD(pipeline, dec_packet_in); + DEBUGFS_FWSTATS_ADD(pipeline, dec_packet_in_fifo_full); + DEBUGFS_FWSTATS_ADD(pipeline, dec_packet_out); + DEBUGFS_FWSTATS_ADD(pipeline, pipeline_fifo_full); + + DEBUGFS_FWSTATS_ADD(diversity, num_of_packets_per_ant); + DEBUGFS_FWSTATS_ADD(diversity, total_num_of_toggles); + + DEBUGFS_FWSTATS_ADD(thermal, irq_thr_low); + DEBUGFS_FWSTATS_ADD(thermal, irq_thr_high); + DEBUGFS_FWSTATS_ADD(thermal, tx_stop); + DEBUGFS_FWSTATS_ADD(thermal, tx_resume); + DEBUGFS_FWSTATS_ADD(thermal, false_irq); + DEBUGFS_FWSTATS_ADD(thermal, adc_source_unexpected); + + DEBUGFS_FWSTATS_ADD(calib, fail_count); + + DEBUGFS_FWSTATS_ADD(calib, calib_count); + + DEBUGFS_FWSTATS_ADD(roaming, rssi_level); + + DEBUGFS_FWSTATS_ADD(dfs, num_of_radar_detections); + + DEBUGFS_ADD(conf, moddir); + DEBUGFS_ADD(radar_detection, moddir); +#ifdef CONFIG_CFG80211_CERTIFICATION_ONUS + DEBUGFS_ADD(radar_debug_mode, moddir); +#endif + DEBUGFS_ADD(dynamic_fw_traces, moddir); + + return 0; +} diff --git a/drivers/net/wireless/ti/wl18xx/debugfs.h b/drivers/net/wireless/ti/wl18xx/debugfs.h new file mode 100644 index 0000000000..0169ff1a13 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/debugfs.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + */ + +#ifndef __WL18XX_DEBUGFS_H__ +#define __WL18XX_DEBUGFS_H__ + +int wl18xx_debugfs_add_files(struct wl1271 *wl, + struct dentry *rootdir); + +#endif /* __WL18XX_DEBUGFS_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c new file mode 100644 index 0000000000..34d95f458e --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/event.c @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + */ + +#include <net/genetlink.h> +#include "event.h" +#include "scan.h" +#include "conf.h" +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" +#include "../wlcore/vendor_cmd.h" + +int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout) +{ + u32 local_event; + + switch (event) { + case WLCORE_EVENT_PEER_REMOVE_COMPLETE: + local_event = PEER_REMOVE_COMPLETE_EVENT_ID; + break; + + case WLCORE_EVENT_DFS_CONFIG_COMPLETE: + local_event = DFS_CHANNELS_CONFIG_COMPLETE_EVENT; + break; + + default: + /* event not implemented */ + return 0; + } + return wlcore_cmd_wait_for_event_or_timeout(wl, local_event, timeout); +} + +static const char *wl18xx_radar_type_decode(u8 radar_type) +{ + switch (radar_type) { + case RADAR_TYPE_REGULAR: + return "REGULAR"; + case RADAR_TYPE_CHIRP: + return "CHIRP"; + case RADAR_TYPE_NONE: + default: + return "N/A"; + } +} + +static int wlcore_smart_config_sync_event(struct wl1271 *wl, u8 sync_channel, + u8 sync_band) +{ + struct sk_buff *skb; + enum nl80211_band band; + int freq; + + if (sync_band == WLCORE_BAND_5GHZ) + band = NL80211_BAND_5GHZ; + else + band = NL80211_BAND_2GHZ; + + freq = ieee80211_channel_to_frequency(sync_channel, band); + + wl1271_debug(DEBUG_EVENT, + "SMART_CONFIG_SYNC_EVENT_ID, freq: %d (chan: %d band %d)", + freq, sync_channel, sync_band); + skb = cfg80211_vendor_event_alloc(wl->hw->wiphy, NULL, 20, + WLCORE_VENDOR_EVENT_SC_SYNC, + GFP_KERNEL); + + if (nla_put_u32(skb, WLCORE_VENDOR_ATTR_FREQ, freq)) { + kfree_skb(skb); + return -EMSGSIZE; + } + cfg80211_vendor_event(skb, GFP_KERNEL); + return 0; +} + +static int wlcore_smart_config_decode_event(struct wl1271 *wl, + u8 ssid_len, u8 *ssid, + u8 pwd_len, u8 *pwd) +{ + struct sk_buff *skb; + + wl1271_debug(DEBUG_EVENT, "SMART_CONFIG_DECODE_EVENT_ID"); + wl1271_dump_ascii(DEBUG_EVENT, "SSID:", ssid, ssid_len); + + skb = cfg80211_vendor_event_alloc(wl->hw->wiphy, NULL, + ssid_len + pwd_len + 20, + WLCORE_VENDOR_EVENT_SC_DECODE, + GFP_KERNEL); + + if (nla_put(skb, WLCORE_VENDOR_ATTR_SSID, ssid_len, ssid) || + nla_put(skb, WLCORE_VENDOR_ATTR_PSK, pwd_len, pwd)) { + kfree_skb(skb); + return -EMSGSIZE; + } + cfg80211_vendor_event(skb, GFP_KERNEL); + return 0; +} + +static void wlcore_event_time_sync(struct wl1271 *wl, + u16 tsf_high_msb, u16 tsf_high_lsb, + u16 tsf_low_msb, u16 tsf_low_lsb) +{ + u32 clock_low; + u32 clock_high; + + clock_high = (tsf_high_msb << 16) | tsf_high_lsb; + clock_low = (tsf_low_msb << 16) | tsf_low_lsb; + + wl1271_info("TIME_SYNC_EVENT_ID: clock_high %u, clock low %u", + clock_high, clock_low); +} + +int wl18xx_process_mailbox_events(struct wl1271 *wl) +{ + struct wl18xx_event_mailbox *mbox = wl->mbox; + u32 vector; + + vector = le32_to_cpu(mbox->events_vector); + wl1271_debug(DEBUG_EVENT, "MBOX vector: 0x%x", vector); + + if (vector & SCAN_COMPLETE_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "scan results: %d", + mbox->number_of_scan_results); + + if (wl->scan_wlvif) + wl18xx_scan_completed(wl, wl->scan_wlvif); + } + + if (vector & TIME_SYNC_EVENT_ID) + wlcore_event_time_sync(wl, + le16_to_cpu(mbox->time_sync_tsf_high_msb), + le16_to_cpu(mbox->time_sync_tsf_high_lsb), + le16_to_cpu(mbox->time_sync_tsf_low_msb), + le16_to_cpu(mbox->time_sync_tsf_low_lsb)); + + if (vector & RADAR_DETECTED_EVENT_ID) { + wl1271_info("radar event: channel %d type %s", + mbox->radar_channel, + wl18xx_radar_type_decode(mbox->radar_type)); + + if (!wl->radar_debug_mode) + ieee80211_radar_detected(wl->hw); + } + + if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, + "PERIODIC_SCAN_REPORT_EVENT (results %d)", + mbox->number_of_sched_scan_results); + + wlcore_scan_sched_scan_results(wl); + } + + if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) + wlcore_event_sched_scan_completed(wl, 1); + + if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) + wlcore_event_rssi_trigger(wl, mbox->rssi_snr_trigger_metric); + + if (vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID) + wlcore_event_ba_rx_constraint(wl, + le16_to_cpu(mbox->rx_ba_role_id_bitmap), + le16_to_cpu(mbox->rx_ba_allowed_bitmap)); + + if (vector & BSS_LOSS_EVENT_ID) + wlcore_event_beacon_loss(wl, + le16_to_cpu(mbox->bss_loss_bitmap)); + + if (vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID) + wlcore_event_channel_switch(wl, + le16_to_cpu(mbox->channel_switch_role_id_bitmap), + true); + + if (vector & DUMMY_PACKET_EVENT_ID) + wlcore_event_dummy_packet(wl); + + /* + * "TX retries exceeded" has a different meaning according to mode. + * In AP mode the offending station is disconnected. + */ + if (vector & MAX_TX_FAILURE_EVENT_ID) + wlcore_event_max_tx_failure(wl, + le16_to_cpu(mbox->tx_retry_exceeded_bitmap)); + + if (vector & INACTIVE_STA_EVENT_ID) + wlcore_event_inactive_sta(wl, + le16_to_cpu(mbox->inactive_sta_bitmap)); + + if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID) + wlcore_event_roc_complete(wl); + + if (vector & SMART_CONFIG_SYNC_EVENT_ID) + wlcore_smart_config_sync_event(wl, mbox->sc_sync_channel, + mbox->sc_sync_band); + + if (vector & SMART_CONFIG_DECODE_EVENT_ID) + wlcore_smart_config_decode_event(wl, + mbox->sc_ssid_len, + mbox->sc_ssid, + mbox->sc_pwd_len, + mbox->sc_pwd); + if (vector & FW_LOGGER_INDICATION) + wlcore_event_fw_logger(wl); + + if (vector & RX_BA_WIN_SIZE_CHANGE_EVENT_ID) { + struct wl12xx_vif *wlvif; + struct ieee80211_vif *vif; + struct ieee80211_sta *sta; + u8 link_id = mbox->rx_ba_link_id; + u8 win_size = mbox->rx_ba_win_size; + const u8 *addr; + + wlvif = wl->links[link_id].wlvif; + vif = wl12xx_wlvif_to_vif(wlvif); + + /* Update RX aggregation window size and call + * MAC routine to stop active RX aggregations for this link + */ + if (wlvif->bss_type != BSS_TYPE_AP_BSS) + addr = vif->bss_conf.bssid; + else + addr = wl->links[link_id].addr; + + sta = ieee80211_find_sta(vif, addr); + if (sta) { + sta->max_rx_aggregation_subframes = win_size; + ieee80211_stop_rx_ba_session(vif, + wl->links[link_id].ba_bitmap, + addr); + } + } + + return 0; +} diff --git a/drivers/net/wireless/ti/wl18xx/event.h b/drivers/net/wireless/ti/wl18xx/event.h new file mode 100644 index 0000000000..91f5d74cad --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/event.h @@ -0,0 +1,110 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + */ + +#ifndef __WL18XX_EVENT_H__ +#define __WL18XX_EVENT_H__ + +#include "../wlcore/wlcore.h" + +enum { + SCAN_COMPLETE_EVENT_ID = BIT(8), + RADAR_DETECTED_EVENT_ID = BIT(9), + CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(10), + BSS_LOSS_EVENT_ID = BIT(11), + MAX_TX_FAILURE_EVENT_ID = BIT(12), + DUMMY_PACKET_EVENT_ID = BIT(13), + INACTIVE_STA_EVENT_ID = BIT(14), + PEER_REMOVE_COMPLETE_EVENT_ID = BIT(15), + PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(16), + BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(17), + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(18), + DFS_CHANNELS_CONFIG_COMPLETE_EVENT = BIT(19), + PERIODIC_SCAN_REPORT_EVENT_ID = BIT(20), + RX_BA_WIN_SIZE_CHANGE_EVENT_ID = BIT(21), + SMART_CONFIG_SYNC_EVENT_ID = BIT(22), + SMART_CONFIG_DECODE_EVENT_ID = BIT(23), + TIME_SYNC_EVENT_ID = BIT(24), + FW_LOGGER_INDICATION = BIT(25), +}; + +enum wl18xx_radar_types { + RADAR_TYPE_NONE, + RADAR_TYPE_REGULAR, + RADAR_TYPE_CHIRP +}; + +struct wl18xx_event_mailbox { + __le32 events_vector; + + u8 number_of_scan_results; + u8 number_of_sched_scan_results; + + __le16 channel_switch_role_id_bitmap; + + s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; + + /* bitmap of removed links */ + __le32 hlid_removed_bitmap; + + /* rx ba constraint */ + __le16 rx_ba_role_id_bitmap; /* 0xfff means any role. */ + __le16 rx_ba_allowed_bitmap; + + /* bitmap of roc completed (by role id) */ + __le16 roc_completed_bitmap; + + /* bitmap of stations (by role id) with bss loss */ + __le16 bss_loss_bitmap; + + /* bitmap of stations (by HLID) which exceeded max tx retries */ + __le16 tx_retry_exceeded_bitmap; + + /* time sync high msb*/ + __le16 time_sync_tsf_high_msb; + + /* bitmap of inactive stations (by HLID) */ + __le16 inactive_sta_bitmap; + + /* time sync high lsb*/ + __le16 time_sync_tsf_high_lsb; + + /* rx BA win size indicated by RX_BA_WIN_SIZE_CHANGE_EVENT_ID */ + u8 rx_ba_role_id; + u8 rx_ba_link_id; + u8 rx_ba_win_size; + u8 padding; + + /* smart config */ + u8 sc_ssid_len; + u8 sc_pwd_len; + u8 sc_token_len; + u8 padding1; + u8 sc_ssid[32]; + u8 sc_pwd[64]; + u8 sc_token[32]; + + /* smart config sync channel */ + u8 sc_sync_channel; + u8 sc_sync_band; + + /* time sync low msb*/ + __le16 time_sync_tsf_low_msb; + + /* radar detect */ + u8 radar_channel; + u8 radar_type; + + /* time sync low lsb*/ + __le16 time_sync_tsf_low_lsb; + +} __packed; + +int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout); +int wl18xx_process_mailbox_events(struct wl1271 *wl); + +#endif diff --git a/drivers/net/wireless/ti/wl18xx/io.c b/drivers/net/wireless/ti/wl18xx/io.c new file mode 100644 index 0000000000..ce61b4bd1e --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/io.c @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments + */ + +#include "../wlcore/wlcore.h" +#include "../wlcore/io.h" + +#include "io.h" + +int wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val) +{ + u32 tmp; + int ret; + + if (WARN_ON(addr % 2)) + return -EINVAL; + + if ((addr % 4) == 0) { + ret = wlcore_read32(wl, addr, &tmp); + if (ret < 0) + goto out; + + tmp = (tmp & 0xffff0000) | val; + ret = wlcore_write32(wl, addr, tmp); + } else { + ret = wlcore_read32(wl, addr - 2, &tmp); + if (ret < 0) + goto out; + + tmp = (tmp & 0xffff) | (val << 16); + ret = wlcore_write32(wl, addr - 2, tmp); + } + +out: + return ret; +} + +int wl18xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out) +{ + u32 val = 0; + int ret; + + if (WARN_ON(addr % 2)) + return -EINVAL; + + if ((addr % 4) == 0) { + /* address is 4-bytes aligned */ + ret = wlcore_read32(wl, addr, &val); + if (ret >= 0 && out) + *out = val & 0xffff; + } else { + ret = wlcore_read32(wl, addr - 2, &val); + if (ret >= 0 && out) + *out = (val & 0xffff0000) >> 16; + } + + return ret; +} diff --git a/drivers/net/wireless/ti/wl18xx/io.h b/drivers/net/wireless/ti/wl18xx/io.h new file mode 100644 index 0000000000..435f7a7814 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/io.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments + */ + +#ifndef __WL18XX_IO_H__ +#define __WL18XX_IO_H__ + +int __must_check wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val); +int __must_check wl18xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out); + +#endif /* __WL18XX_IO_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c new file mode 100644 index 0000000000..0b3cf8477c --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -0,0 +1,2094 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments + */ + +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/ip.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/irq.h> + +#include "../wlcore/wlcore.h" +#include "../wlcore/debug.h" +#include "../wlcore/io.h" +#include "../wlcore/acx.h" +#include "../wlcore/tx.h" +#include "../wlcore/rx.h" +#include "../wlcore/boot.h" + +#include "reg.h" +#include "conf.h" +#include "cmd.h" +#include "acx.h" +#include "tx.h" +#include "wl18xx.h" +#include "io.h" +#include "scan.h" +#include "event.h" +#include "debugfs.h" + +#define WL18XX_RX_CHECKSUM_MASK 0x40 + +static char *ht_mode_param = NULL; +static char *board_type_param = NULL; +static bool checksum_param = false; +static int num_rx_desc_param = -1; + +/* phy paramters */ +static int dc2dc_param = -1; +static int n_antennas_2_param = -1; +static int n_antennas_5_param = -1; +static int low_band_component_param = -1; +static int low_band_component_type_param = -1; +static int high_band_component_param = -1; +static int high_band_component_type_param = -1; +static int pwr_limit_reference_11_abg_param = -1; + +static const u8 wl18xx_rate_to_idx_2ghz[] = { + /* MCS rates are used only with 11n */ + 15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */ + 14, /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */ + 13, /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */ + 12, /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */ + 11, /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */ + 10, /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */ + 9, /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */ + 8, /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */ + 7, /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */ + 6, /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */ + 5, /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */ + 4, /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */ + 3, /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */ + 2, /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */ + 1, /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */ + 0, /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */ + + 11, /* WL18XX_CONF_HW_RXTX_RATE_54 */ + 10, /* WL18XX_CONF_HW_RXTX_RATE_48 */ + 9, /* WL18XX_CONF_HW_RXTX_RATE_36 */ + 8, /* WL18XX_CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22 */ + + 7, /* WL18XX_CONF_HW_RXTX_RATE_18 */ + 6, /* WL18XX_CONF_HW_RXTX_RATE_12 */ + 3, /* WL18XX_CONF_HW_RXTX_RATE_11 */ + 5, /* WL18XX_CONF_HW_RXTX_RATE_9 */ + 4, /* WL18XX_CONF_HW_RXTX_RATE_6 */ + 2, /* WL18XX_CONF_HW_RXTX_RATE_5_5 */ + 1, /* WL18XX_CONF_HW_RXTX_RATE_2 */ + 0 /* WL18XX_CONF_HW_RXTX_RATE_1 */ +}; + +static const u8 wl18xx_rate_to_idx_5ghz[] = { + /* MCS rates are used only with 11n */ + 15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */ + 14, /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */ + 13, /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */ + 12, /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */ + 11, /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */ + 10, /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */ + 9, /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */ + 8, /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */ + 7, /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */ + 6, /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */ + 5, /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */ + 4, /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */ + 3, /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */ + 2, /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */ + 1, /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */ + 0, /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */ + + 7, /* WL18XX_CONF_HW_RXTX_RATE_54 */ + 6, /* WL18XX_CONF_HW_RXTX_RATE_48 */ + 5, /* WL18XX_CONF_HW_RXTX_RATE_36 */ + 4, /* WL18XX_CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22 */ + + 3, /* WL18XX_CONF_HW_RXTX_RATE_18 */ + 2, /* WL18XX_CONF_HW_RXTX_RATE_12 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_11 */ + 1, /* WL18XX_CONF_HW_RXTX_RATE_9 */ + 0, /* WL18XX_CONF_HW_RXTX_RATE_6 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_5_5 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_2 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_1 */ +}; + +static const u8 *wl18xx_band_rate_to_idx[] = { + [NL80211_BAND_2GHZ] = wl18xx_rate_to_idx_2ghz, + [NL80211_BAND_5GHZ] = wl18xx_rate_to_idx_5ghz +}; + +enum wl18xx_hw_rates { + WL18XX_CONF_HW_RXTX_RATE_MCS15 = 0, + WL18XX_CONF_HW_RXTX_RATE_MCS14, + WL18XX_CONF_HW_RXTX_RATE_MCS13, + WL18XX_CONF_HW_RXTX_RATE_MCS12, + WL18XX_CONF_HW_RXTX_RATE_MCS11, + WL18XX_CONF_HW_RXTX_RATE_MCS10, + WL18XX_CONF_HW_RXTX_RATE_MCS9, + WL18XX_CONF_HW_RXTX_RATE_MCS8, + WL18XX_CONF_HW_RXTX_RATE_MCS7, + WL18XX_CONF_HW_RXTX_RATE_MCS6, + WL18XX_CONF_HW_RXTX_RATE_MCS5, + WL18XX_CONF_HW_RXTX_RATE_MCS4, + WL18XX_CONF_HW_RXTX_RATE_MCS3, + WL18XX_CONF_HW_RXTX_RATE_MCS2, + WL18XX_CONF_HW_RXTX_RATE_MCS1, + WL18XX_CONF_HW_RXTX_RATE_MCS0, + WL18XX_CONF_HW_RXTX_RATE_54, + WL18XX_CONF_HW_RXTX_RATE_48, + WL18XX_CONF_HW_RXTX_RATE_36, + WL18XX_CONF_HW_RXTX_RATE_24, + WL18XX_CONF_HW_RXTX_RATE_22, + WL18XX_CONF_HW_RXTX_RATE_18, + WL18XX_CONF_HW_RXTX_RATE_12, + WL18XX_CONF_HW_RXTX_RATE_11, + WL18XX_CONF_HW_RXTX_RATE_9, + WL18XX_CONF_HW_RXTX_RATE_6, + WL18XX_CONF_HW_RXTX_RATE_5_5, + WL18XX_CONF_HW_RXTX_RATE_2, + WL18XX_CONF_HW_RXTX_RATE_1, + WL18XX_CONF_HW_RXTX_RATE_MAX, +}; + +static struct wlcore_conf wl18xx_conf = { + .sg = { + .params = { + [WL18XX_CONF_SG_PARAM_0] = 0, + /* Configuration Parameters */ + [WL18XX_CONF_SG_ANTENNA_CONFIGURATION] = 0, + [WL18XX_CONF_SG_ZIGBEE_COEX] = 0, + [WL18XX_CONF_SG_TIME_SYNC] = 0, + [WL18XX_CONF_SG_PARAM_4] = 0, + [WL18XX_CONF_SG_PARAM_5] = 0, + [WL18XX_CONF_SG_PARAM_6] = 0, + [WL18XX_CONF_SG_PARAM_7] = 0, + [WL18XX_CONF_SG_PARAM_8] = 0, + [WL18XX_CONF_SG_PARAM_9] = 0, + [WL18XX_CONF_SG_PARAM_10] = 0, + [WL18XX_CONF_SG_PARAM_11] = 0, + [WL18XX_CONF_SG_PARAM_12] = 0, + [WL18XX_CONF_SG_PARAM_13] = 0, + [WL18XX_CONF_SG_PARAM_14] = 0, + [WL18XX_CONF_SG_PARAM_15] = 0, + [WL18XX_CONF_SG_PARAM_16] = 0, + [WL18XX_CONF_SG_PARAM_17] = 0, + [WL18XX_CONF_SG_PARAM_18] = 0, + [WL18XX_CONF_SG_PARAM_19] = 0, + [WL18XX_CONF_SG_PARAM_20] = 0, + [WL18XX_CONF_SG_PARAM_21] = 0, + [WL18XX_CONF_SG_PARAM_22] = 0, + [WL18XX_CONF_SG_PARAM_23] = 0, + [WL18XX_CONF_SG_PARAM_24] = 0, + [WL18XX_CONF_SG_PARAM_25] = 0, + /* Active Scan Parameters */ + [WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ] = 170, + [WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50, + [WL18XX_CONF_SG_PARAM_28] = 0, + /* Passive Scan Parameters */ + [WL18XX_CONF_SG_PARAM_29] = 0, + [WL18XX_CONF_SG_PARAM_30] = 0, + [WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200, + /* Passive Scan in Dual Antenna Parameters */ + [WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0, + [WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN] = 0, + [WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN] = 0, + /* General Parameters */ + [WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1, + [WL18XX_CONF_SG_PARAM_36] = 0, + [WL18XX_CONF_SG_BEACON_MISS_PERCENT] = 60, + [WL18XX_CONF_SG_PARAM_38] = 0, + [WL18XX_CONF_SG_RXT] = 1200, + [WL18XX_CONF_SG_UNUSED] = 0, + [WL18XX_CONF_SG_ADAPTIVE_RXT_TXT] = 1, + [WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP] = 3, + [WL18XX_CONF_SG_HV3_MAX_SERVED] = 6, + [WL18XX_CONF_SG_PARAM_44] = 0, + [WL18XX_CONF_SG_PARAM_45] = 0, + [WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2, + [WL18XX_CONF_SG_GEMINI_PARAM_47] = 0, + [WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 0, + /* AP Parameters */ + [WL18XX_CONF_SG_AP_BEACON_MISS_TX] = 3, + [WL18XX_CONF_SG_PARAM_50] = 0, + [WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL] = 2, + [WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME] = 30, + [WL18XX_CONF_SG_PARAM_53] = 0, + [WL18XX_CONF_SG_PARAM_54] = 0, + /* CTS Diluting Parameters */ + [WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0, + [WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_1] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_2] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_3] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_4] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_5] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_6] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_7] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_8] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_9] = 0, + [WL18XX_CONF_SG_TEMP_PARAM_10] = 0, + }, + .state = CONF_SG_PROTECTIVE, + }, + .rx = { + .rx_msdu_life_time = 512000, + .packet_detection_threshold = 0, + .ps_poll_timeout = 15, + .upsd_timeout = 15, + .rts_threshold = IEEE80211_MAX_RTS_THRESHOLD, + .rx_cca_threshold = 0, + .irq_blk_threshold = 0xFFFF, + .irq_pkt_threshold = 0, + .irq_timeout = 600, + .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY, + }, + .tx = { + .tx_energy_detection = 0, + .sta_rc_conf = { + .enabled_rates = 0, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0, + }, + .ac_conf_count = 4, + .ac_conf = { + [CONF_TX_AC_BE] = { + .ac = CONF_TX_AC_BE, + .cw_min = 15, + .cw_max = 63, + .aifsn = 3, + .tx_op_limit = 0, + }, + [CONF_TX_AC_BK] = { + .ac = CONF_TX_AC_BK, + .cw_min = 15, + .cw_max = 63, + .aifsn = 7, + .tx_op_limit = 0, + }, + [CONF_TX_AC_VI] = { + .ac = CONF_TX_AC_VI, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 3008, + }, + [CONF_TX_AC_VO] = { + .ac = CONF_TX_AC_VO, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 1504, + }, + }, + .max_tx_retries = 100, + .ap_aging_period = 300, + .tid_conf_count = 4, + .tid_conf = { + [CONF_TX_AC_BE] = { + .queue_id = CONF_TX_AC_BE, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BE, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_BK] = { + .queue_id = CONF_TX_AC_BK, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BK, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VI] = { + .queue_id = CONF_TX_AC_VI, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VI, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VO] = { + .queue_id = CONF_TX_AC_VO, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VO, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + }, + .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, + .tx_compl_timeout = 350, + .tx_compl_threshold = 10, + .basic_rate = CONF_HW_BIT_RATE_1MBPS, + .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, + .tmpl_short_retry_limit = 10, + .tmpl_long_retry_limit = 10, + .tx_watchdog_timeout = 5000, + .slow_link_thold = 3, + .fast_link_thold = 30, + }, + .conn = { + .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, + .listen_interval = 1, + .suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM, + .suspend_listen_interval = 3, + .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED, + .bcn_filt_ie_count = 3, + .bcn_filt_ie = { + [0] = { + .ie = WLAN_EID_CHANNEL_SWITCH, + .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE, + }, + [1] = { + .ie = WLAN_EID_HT_OPERATION, + .rule = CONF_BCN_RULE_PASS_ON_CHANGE, + }, + [2] = { + .ie = WLAN_EID_ERP_INFO, + .rule = CONF_BCN_RULE_PASS_ON_CHANGE, + }, + }, + .synch_fail_thold = 12, + .bss_lose_timeout = 400, + .beacon_rx_timeout = 10000, + .broadcast_timeout = 20000, + .rx_broadcast_in_ps = 1, + .ps_poll_threshold = 10, + .bet_enable = CONF_BET_MODE_ENABLE, + .bet_max_consecutive = 50, + .psm_entry_retries = 8, + .psm_exit_retries = 16, + .psm_entry_nullfunc_retries = 3, + .dynamic_ps_timeout = 1500, + .forced_ps = false, + .keep_alive_interval = 55000, + .max_listen_interval = 20, + .sta_sleep_auth = WL1271_PSM_ILLEGAL, + .suspend_rx_ba_activity = 0, + }, + .itrim = { + .enable = false, + .timeout = 50000, + }, + .pm_config = { + .host_clk_settling_time = 5000, + .host_fast_wakeup_support = CONF_FAST_WAKEUP_DISABLE, + }, + .roam_trigger = { + .trigger_pacing = 1, + .avg_weight_rssi_beacon = 20, + .avg_weight_rssi_data = 10, + .avg_weight_snr_beacon = 20, + .avg_weight_snr_data = 10, + }, + .scan = { + .min_dwell_time_active = 7500, + .max_dwell_time_active = 30000, + .min_dwell_time_active_long = 25000, + .max_dwell_time_active_long = 50000, + .dwell_time_passive = 100000, + .dwell_time_dfs = 150000, + .num_probe_reqs = 2, + .split_scan_timeout = 50000, + }, + .sched_scan = { + /* + * Values are in TU/1000 but since sched scan FW command + * params are in TUs rounding up may occur. + */ + .base_dwell_time = 7500, + .max_dwell_time_delta = 22500, + /* based on 250bits per probe @1Mbps */ + .dwell_time_delta_per_probe = 2000, + /* based on 250bits per probe @6Mbps (plus a bit more) */ + .dwell_time_delta_per_probe_5 = 350, + .dwell_time_passive = 100000, + .dwell_time_dfs = 150000, + .num_probe_reqs = 2, + .rssi_threshold = -90, + .snr_threshold = 0, + .num_short_intervals = SCAN_MAX_SHORT_INTERVALS, + .long_interval = 30000, + }, + .ht = { + .rx_ba_win_size = 32, + .tx_ba_win_size = 64, + .inactivity_timeout = 10000, + .tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP, + }, + .mem = { + .num_stations = 1, + .ssid_profiles = 1, + .rx_block_num = 40, + .tx_min_block_num = 40, + .dynamic_memory = 1, + .min_req_tx_blocks = 45, + .min_req_rx_blocks = 22, + .tx_min = 27, + }, + .fm_coex = { + .enable = true, + .swallow_period = 5, + .n_divider_fref_set_1 = 0xff, /* default */ + .n_divider_fref_set_2 = 12, + .m_divider_fref_set_1 = 0xffff, + .m_divider_fref_set_2 = 148, /* default */ + .coex_pll_stabilization_time = 0xffffffff, /* default */ + .ldo_stabilization_time = 0xffff, /* default */ + .fm_disturbed_band_margin = 0xff, /* default */ + .swallow_clk_diff = 0xff, /* default */ + }, + .rx_streaming = { + .duration = 150, + .queues = 0x1, + .interval = 20, + .always = 0, + }, + .fwlog = { + .mode = WL12XX_FWLOG_CONTINUOUS, + .mem_blocks = 0, + .severity = 0, + .timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED, + .output = WL12XX_FWLOG_OUTPUT_DBG_PINS, + .threshold = 0, + }, + .rate = { + .rate_retry_score = 32000, + .per_add = 8192, + .per_th1 = 2048, + .per_th2 = 4096, + .max_per = 8100, + .inverse_curiosity_factor = 5, + .tx_fail_low_th = 4, + .tx_fail_high_th = 10, + .per_alpha_shift = 4, + .per_add_shift = 13, + .per_beta1_shift = 10, + .per_beta2_shift = 8, + .rate_check_up = 2, + .rate_check_down = 12, + .rate_retry_policy = { + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + }, + }, + .hangover = { + .recover_time = 0, + .hangover_period = 20, + .dynamic_mode = 1, + .early_termination_mode = 1, + .max_period = 20, + .min_period = 1, + .increase_delta = 1, + .decrease_delta = 2, + .quiet_time = 4, + .increase_time = 1, + .window_size = 16, + }, + .recovery = { + .bug_on_recovery = 0, + .no_recovery = 0, + }, +}; + +static struct wl18xx_priv_conf wl18xx_default_priv_conf = { + .ht = { + .mode = HT_MODE_WIDE, + }, + .phy = { + .phy_standalone = 0x00, + .primary_clock_setting_time = 0x05, + .clock_valid_on_wake_up = 0x00, + .secondary_clock_setting_time = 0x05, + .board_type = BOARD_TYPE_HDK_18XX, + .auto_detect = 0x00, + .dedicated_fem = FEM_NONE, + .low_band_component = COMPONENT_3_WAY_SWITCH, + .low_band_component_type = 0x05, + .high_band_component = COMPONENT_2_WAY_SWITCH, + .high_band_component_type = 0x09, + .tcxo_ldo_voltage = 0x00, + .xtal_itrim_val = 0x04, + .srf_state = 0x00, + .io_configuration = 0x01, + .sdio_configuration = 0x00, + .settings = 0x00, + .enable_clpc = 0x00, + .enable_tx_low_pwr_on_siso_rdl = 0x00, + .rx_profile = 0x00, + .pwr_limit_reference_11_abg = 0x64, + .per_chan_pwr_limit_arr_11abg = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, + .pwr_limit_reference_11p = 0x64, + .per_chan_bo_mode_11_abg = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00 }, + .per_chan_bo_mode_11_p = { 0x00, 0x00, 0x00, 0x00 }, + .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff }, + .psat = 0, + .external_pa_dc2dc = 0, + .number_of_assembled_ant2_4 = 2, + .number_of_assembled_ant5 = 1, + .low_power_val = 0xff, + .med_power_val = 0xff, + .high_power_val = 0xff, + .low_power_val_2nd = 0xff, + .med_power_val_2nd = 0xff, + .high_power_val_2nd = 0xff, + .tx_rf_margin = 1, + }, + .ap_sleep = { /* disabled by default */ + .idle_duty_cycle = 0, + .connected_duty_cycle = 0, + .max_stations_thresh = 0, + .idle_conn_thresh = 0, + }, +}; + +static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = { + [PART_TOP_PRCM_ELP_SOC] = { + .mem = { .start = 0x00A00000, .size = 0x00012000 }, + .reg = { .start = 0x00807000, .size = 0x00005000 }, + .mem2 = { .start = 0x00800000, .size = 0x0000B000 }, + .mem3 = { .start = 0x00401594, .size = 0x00001020 }, + }, + [PART_DOWN] = { + .mem = { .start = 0x00000000, .size = 0x00014000 }, + .reg = { .start = 0x00810000, .size = 0x0000BFFF }, + .mem2 = { .start = 0x00000000, .size = 0x00000000 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, + [PART_BOOT] = { + .mem = { .start = 0x00700000, .size = 0x0000030c }, + .reg = { .start = 0x00802000, .size = 0x00014578 }, + .mem2 = { .start = 0x00B00404, .size = 0x00001000 }, + .mem3 = { .start = 0x00C00000, .size = 0x00000400 }, + }, + [PART_WORK] = { + .mem = { .start = 0x00800000, .size = 0x000050FC }, + .reg = { .start = 0x00B00404, .size = 0x00001000 }, + .mem2 = { .start = 0x00C00000, .size = 0x00000400 }, + .mem3 = { .start = 0x00401594, .size = 0x00001020 }, + }, + [PART_PHY_INIT] = { + .mem = { .start = WL18XX_PHY_INIT_MEM_ADDR, + .size = WL18XX_PHY_INIT_MEM_SIZE }, + .reg = { .start = 0x00000000, .size = 0x00000000 }, + .mem2 = { .start = 0x00000000, .size = 0x00000000 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, +}; + +static const int wl18xx_rtable[REG_TABLE_LEN] = { + [REG_ECPU_CONTROL] = WL18XX_REG_ECPU_CONTROL, + [REG_INTERRUPT_NO_CLEAR] = WL18XX_REG_INTERRUPT_NO_CLEAR, + [REG_INTERRUPT_ACK] = WL18XX_REG_INTERRUPT_ACK, + [REG_COMMAND_MAILBOX_PTR] = WL18XX_REG_COMMAND_MAILBOX_PTR, + [REG_EVENT_MAILBOX_PTR] = WL18XX_REG_EVENT_MAILBOX_PTR, + [REG_INTERRUPT_TRIG] = WL18XX_REG_INTERRUPT_TRIG_H, + [REG_INTERRUPT_MASK] = WL18XX_REG_INTERRUPT_MASK, + [REG_PC_ON_RECOVERY] = WL18XX_SCR_PAD4, + [REG_CHIP_ID_B] = WL18XX_REG_CHIP_ID_B, + [REG_CMD_MBOX_ADDRESS] = WL18XX_CMD_MBOX_ADDRESS, + + /* data access memory addresses, used with partition translation */ + [REG_SLV_MEM_DATA] = WL18XX_SLV_MEM_DATA, + [REG_SLV_REG_DATA] = WL18XX_SLV_REG_DATA, + + /* raw data access memory addresses */ + [REG_RAW_FW_STATUS_ADDR] = WL18XX_FW_STATUS_ADDR, +}; + +static const struct wl18xx_clk_cfg wl18xx_clk_table_coex[NUM_CLOCK_CONFIGS] = { + [CLOCK_CONFIG_16_2_M] = { 8, 121, 0, 0, false }, + [CLOCK_CONFIG_16_368_M] = { 8, 120, 0, 0, false }, + [CLOCK_CONFIG_16_8_M] = { 8, 117, 0, 0, false }, + [CLOCK_CONFIG_19_2_M] = { 10, 128, 0, 0, false }, + [CLOCK_CONFIG_26_M] = { 11, 104, 0, 0, false }, + [CLOCK_CONFIG_32_736_M] = { 8, 120, 0, 0, false }, + [CLOCK_CONFIG_33_6_M] = { 8, 117, 0, 0, false }, + [CLOCK_CONFIG_38_468_M] = { 10, 128, 0, 0, false }, + [CLOCK_CONFIG_52_M] = { 11, 104, 0, 0, false }, +}; + +static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = { + [CLOCK_CONFIG_16_2_M] = { 7, 104, 801, 4, true }, + [CLOCK_CONFIG_16_368_M] = { 9, 132, 3751, 4, true }, + [CLOCK_CONFIG_16_8_M] = { 7, 100, 0, 0, false }, + [CLOCK_CONFIG_19_2_M] = { 8, 100, 0, 0, false }, + [CLOCK_CONFIG_26_M] = { 13, 120, 0, 0, false }, + [CLOCK_CONFIG_32_736_M] = { 9, 132, 3751, 4, true }, + [CLOCK_CONFIG_33_6_M] = { 7, 100, 0, 0, false }, + [CLOCK_CONFIG_38_468_M] = { 8, 100, 0, 0, false }, + [CLOCK_CONFIG_52_M] = { 13, 120, 0, 0, false }, +}; + +/* TODO: maybe move to a new header file? */ +#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw-4.bin" + +static int wl18xx_identify_chip(struct wl1271 *wl) +{ + int ret = 0; + + switch (wl->chip.id) { + case CHIP_ID_185x_PG20: + wl1271_debug(DEBUG_BOOT, "chip id 0x%x (185x PG20)", + wl->chip.id); + wl->sr_fw_name = WL18XX_FW_NAME; + /* wl18xx uses the same firmware for PLT */ + wl->plt_fw_name = WL18XX_FW_NAME; + wl->quirks |= WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN | + WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | + WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN | + WLCORE_QUIRK_TX_PAD_LAST_FRAME | + WLCORE_QUIRK_REGDOMAIN_CONF | + WLCORE_QUIRK_DUAL_PROBE_TMPL; + + wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, + WL18XX_IFTYPE_VER, WL18XX_MAJOR_VER, + WL18XX_SUBTYPE_VER, WL18XX_MINOR_VER, + /* there's no separate multi-role FW */ + 0, 0, 0, 0); + break; + case CHIP_ID_185x_PG10: + wl1271_warning("chip id 0x%x (185x PG10) is deprecated", + wl->chip.id); + ret = -ENODEV; + goto out; + + default: + wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); + ret = -ENODEV; + goto out; + } + + wl->fw_mem_block_size = 272; + wl->fwlog_end = 0x40000000; + + wl->scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; + wl->scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; + wl->sched_scan_templ_id_2_4 = CMD_TEMPL_PROBE_REQ_2_4_PERIODIC; + wl->sched_scan_templ_id_5 = CMD_TEMPL_PROBE_REQ_5_PERIODIC; + wl->max_channels_5 = WL18XX_MAX_CHANNELS_5GHZ; + wl->ba_rx_session_count_max = WL18XX_RX_BA_MAX_SESSIONS; +out: + return ret; +} + +static int wl18xx_set_clk(struct wl1271 *wl) +{ + u16 clk_freq; + int ret; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); + if (ret < 0) + goto out; + + /* TODO: PG2: apparently we need to read the clk type */ + + ret = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT, &clk_freq); + if (ret < 0) + goto out; + + wl1271_debug(DEBUG_BOOT, "clock freq %d (%d, %d, %d, %d, %s)", clk_freq, + wl18xx_clk_table[clk_freq].n, wl18xx_clk_table[clk_freq].m, + wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q, + wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit"); + + /* coex PLL configuration */ + ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_N, + wl18xx_clk_table_coex[clk_freq].n); + if (ret < 0) + goto out; + + ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_M, + wl18xx_clk_table_coex[clk_freq].m); + if (ret < 0) + goto out; + + /* bypass the swallowing logic */ + ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN, + PLLSH_COEX_PLL_SWALLOW_EN_VAL1); + if (ret < 0) + goto out; + + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N, + wl18xx_clk_table[clk_freq].n); + if (ret < 0) + goto out; + + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M, + wl18xx_clk_table[clk_freq].m); + if (ret < 0) + goto out; + + if (wl18xx_clk_table[clk_freq].swallow) { + /* first the 16 lower bits */ + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1, + wl18xx_clk_table[clk_freq].q & + PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK); + if (ret < 0) + goto out; + + /* then the 16 higher bits, masked out */ + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2, + (wl18xx_clk_table[clk_freq].q >> 16) & + PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK); + if (ret < 0) + goto out; + + /* first the 16 lower bits */ + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1, + wl18xx_clk_table[clk_freq].p & + PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK); + if (ret < 0) + goto out; + + /* then the 16 higher bits, masked out */ + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2, + (wl18xx_clk_table[clk_freq].p >> 16) & + PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK); + if (ret < 0) + goto out; + } else { + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN, + PLLSH_WCS_PLL_SWALLOW_EN_VAL2); + if (ret < 0) + goto out; + } + + /* choose WCS PLL */ + ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_SEL, + PLLSH_WL_PLL_SEL_WCS_PLL); + if (ret < 0) + goto out; + + /* enable both PLLs */ + ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL1); + if (ret < 0) + goto out; + + udelay(1000); + + /* disable coex PLL */ + ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL2); + if (ret < 0) + goto out; + + /* reset the swallowing logic */ + ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN, + PLLSH_COEX_PLL_SWALLOW_EN_VAL2); + +out: + return ret; +} + +static int wl18xx_boot_soft_reset(struct wl1271 *wl) +{ + int ret; + + /* disable Rx/Tx */ + ret = wlcore_write32(wl, WL18XX_ENABLE, 0x0); + if (ret < 0) + goto out; + + /* disable auto calibration on start*/ + ret = wlcore_write32(wl, WL18XX_SPARE_A2, 0xffff); + +out: + return ret; +} + +static int wl18xx_pre_boot(struct wl1271 *wl) +{ + int ret; + + ret = wl18xx_set_clk(wl); + if (ret < 0) + goto out; + + /* Continue the ELP wake up sequence */ + ret = wlcore_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); + if (ret < 0) + goto out; + + udelay(500); + + ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); + if (ret < 0) + goto out; + + /* Disable interrupts */ + ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); + if (ret < 0) + goto out; + + ret = wl18xx_boot_soft_reset(wl); + +out: + return ret; +} + +static int wl18xx_pre_upload(struct wl1271 *wl) +{ + u32 tmp; + int ret; + u16 irq_invert; + + BUILD_BUG_ON(sizeof(struct wl18xx_mac_and_phy_params) > + WL18XX_PHY_INIT_MEM_SIZE); + + ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); + if (ret < 0) + goto out; + + /* TODO: check if this is all needed */ + ret = wlcore_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND); + if (ret < 0) + goto out; + + ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp); + if (ret < 0) + goto out; + + wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); + + ret = wlcore_read32(wl, WL18XX_SCR_PAD2, &tmp); + if (ret < 0) + goto out; + + /* + * Workaround for FDSP code RAM corruption (needed for PG2.1 + * and newer; for older chips it's a NOP). Change FDSP clock + * settings so that it's muxed to the ATGP clock instead of + * its own clock. + */ + + ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); + if (ret < 0) + goto out; + + /* disable FDSP clock */ + ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1, + MEM_FDSP_CLK_120_DISABLE); + if (ret < 0) + goto out; + + /* set ATPG clock toward FDSP Code RAM rather than its own clock */ + ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1, + MEM_FDSP_CODERAM_FUNC_CLK_SEL); + if (ret < 0) + goto out; + + /* re-enable FDSP clock */ + ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1, + MEM_FDSP_CLK_120_ENABLE); + if (ret < 0) + goto out; + + ret = irq_get_trigger_type(wl->irq); + if ((ret == IRQ_TYPE_LEVEL_LOW) || (ret == IRQ_TYPE_EDGE_FALLING)) { + wl1271_info("using inverted interrupt logic: %d", ret); + ret = wlcore_set_partition(wl, + &wl->ptable[PART_TOP_PRCM_ELP_SOC]); + if (ret < 0) + goto out; + + ret = wl18xx_top_reg_read(wl, TOP_FN0_CCCR_REG_32, &irq_invert); + if (ret < 0) + goto out; + + irq_invert |= BIT(1); + ret = wl18xx_top_reg_write(wl, TOP_FN0_CCCR_REG_32, irq_invert); + if (ret < 0) + goto out; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); + } + +out: + return ret; +} + +static int wl18xx_set_mac_and_phy(struct wl1271 *wl) +{ + struct wl18xx_priv *priv = wl->priv; + struct wl18xx_mac_and_phy_params *params; + int ret; + + params = kmemdup(&priv->conf.phy, sizeof(*params), GFP_KERNEL); + if (!params) { + ret = -ENOMEM; + goto out; + } + + ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); + if (ret < 0) + goto out; + + ret = wlcore_write(wl, WL18XX_PHY_INIT_MEM_ADDR, params, + sizeof(*params), false); + +out: + kfree(params); + return ret; +} + +static int wl18xx_enable_interrupts(struct wl1271 *wl) +{ + u32 event_mask, intr_mask; + int ret; + + event_mask = WL18XX_ACX_EVENTS_VECTOR; + intr_mask = WL18XX_INTR_MASK; + + ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, event_mask); + if (ret < 0) + goto out; + + wlcore_enable_interrupts(wl); + + ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, + WL1271_ACX_INTR_ALL & ~intr_mask); + if (ret < 0) + goto disable_interrupts; + + return ret; + +disable_interrupts: + wlcore_disable_interrupts(wl); + +out: + return ret; +} + +static int wl18xx_boot(struct wl1271 *wl) +{ + int ret; + + ret = wl18xx_pre_boot(wl); + if (ret < 0) + goto out; + + ret = wl18xx_pre_upload(wl); + if (ret < 0) + goto out; + + ret = wlcore_boot_upload_firmware(wl); + if (ret < 0) + goto out; + + ret = wl18xx_set_mac_and_phy(wl); + if (ret < 0) + goto out; + + wl->event_mask = BSS_LOSS_EVENT_ID | + SCAN_COMPLETE_EVENT_ID | + RADAR_DETECTED_EVENT_ID | + RSSI_SNR_TRIGGER_0_EVENT_ID | + PERIODIC_SCAN_COMPLETE_EVENT_ID | + PERIODIC_SCAN_REPORT_EVENT_ID | + DUMMY_PACKET_EVENT_ID | + PEER_REMOVE_COMPLETE_EVENT_ID | + BA_SESSION_RX_CONSTRAINT_EVENT_ID | + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | + INACTIVE_STA_EVENT_ID | + CHANNEL_SWITCH_COMPLETE_EVENT_ID | + DFS_CHANNELS_CONFIG_COMPLETE_EVENT | + SMART_CONFIG_SYNC_EVENT_ID | + SMART_CONFIG_DECODE_EVENT_ID | + TIME_SYNC_EVENT_ID | + FW_LOGGER_INDICATION | + RX_BA_WIN_SIZE_CHANGE_EVENT_ID; + + wl->ap_event_mask = MAX_TX_FAILURE_EVENT_ID; + + ret = wlcore_boot_run_firmware(wl); + if (ret < 0) + goto out; + + ret = wl18xx_enable_interrupts(wl); + +out: + return ret; +} + +static int wl18xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr, + void *buf, size_t len) +{ + struct wl18xx_priv *priv = wl->priv; + + memcpy(priv->cmd_buf, buf, len); + memset(priv->cmd_buf + len, 0, WL18XX_CMD_MAX_SIZE - len); + + return wlcore_write(wl, cmd_box_addr, priv->cmd_buf, + WL18XX_CMD_MAX_SIZE, false); +} + +static int wl18xx_ack_event(struct wl1271 *wl) +{ + return wlcore_write_reg(wl, REG_INTERRUPT_TRIG, + WL18XX_INTR_TRIG_EVENT_ACK); +} + +static u32 wl18xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks) +{ + u32 blk_size = WL18XX_TX_HW_BLOCK_SIZE; + return (len + blk_size - 1) / blk_size + spare_blks; +} + +static void +wl18xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, + u32 blks, u32 spare_blks) +{ + desc->wl18xx_mem.total_mem_blocks = blks; +} + +static void +wl18xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, + struct sk_buff *skb) +{ + desc->length = cpu_to_le16(skb->len); + + /* if only the last frame is to be padded, we unset this bit on Tx */ + if (wl->quirks & WLCORE_QUIRK_TX_PAD_LAST_FRAME) + desc->wl18xx_mem.ctrl = WL18XX_TX_CTRL_NOT_PADDED; + else + desc->wl18xx_mem.ctrl = 0; + + wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d " + "len: %d life: %d mem: %d", desc->hlid, + le16_to_cpu(desc->length), + le16_to_cpu(desc->life_time), + desc->wl18xx_mem.total_mem_blocks); +} + +static enum wl_rx_buf_align +wl18xx_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc) +{ + if (rx_desc & RX_BUF_PADDED_PAYLOAD) + return WLCORE_RX_BUF_PADDED; + + return WLCORE_RX_BUF_ALIGNED; +} + +static u32 wl18xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data, + u32 data_len) +{ + struct wl1271_rx_descriptor *desc = rx_data; + + /* invalid packet */ + if (data_len < sizeof(*desc)) + return 0; + + return data_len - sizeof(*desc); +} + +static void wl18xx_tx_immediate_completion(struct wl1271 *wl) +{ + wl18xx_tx_immediate_complete(wl); +} + +static int wl18xx_set_host_cfg_bitmap(struct wl1271 *wl, u32 extra_mem_blk) +{ + int ret; + u32 sdio_align_size = 0; + u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE | + HOST_IF_CFG_ADD_RX_ALIGNMENT; + + /* Enable Tx SDIO padding */ + if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN) { + host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK; + sdio_align_size = WL12XX_BUS_BLOCK_SIZE; + } + + /* Enable Rx SDIO padding */ + if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN) { + host_cfg_bitmap |= HOST_IF_CFG_RX_PAD_TO_SDIO_BLK; + sdio_align_size = WL12XX_BUS_BLOCK_SIZE; + } + + ret = wl18xx_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap, + sdio_align_size, extra_mem_blk, + WL18XX_HOST_IF_LEN_SIZE_FIELD); + if (ret < 0) + return ret; + + return 0; +} + +static int wl18xx_hw_init(struct wl1271 *wl) +{ + int ret; + struct wl18xx_priv *priv = wl->priv; + + /* (re)init private structures. Relevant on recovery as well. */ + priv->last_fw_rls_idx = 0; + priv->extra_spare_key_count = 0; + + /* set the default amount of spare blocks in the bitmap */ + ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_BLOCK_SPARE); + if (ret < 0) + return ret; + + /* set the dynamic fw traces bitmap */ + ret = wl18xx_acx_dynamic_fw_traces(wl); + if (ret < 0) + return ret; + + if (checksum_param) { + ret = wl18xx_acx_set_checksum_state(wl); + if (ret != 0) + return ret; + } + + return ret; +} + +static void wl18xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status, + struct wl_fw_status *fw_status) +{ + struct wl18xx_fw_status *int_fw_status = raw_fw_status; + + fw_status->intr = le32_to_cpu(int_fw_status->intr); + fw_status->fw_rx_counter = int_fw_status->fw_rx_counter; + fw_status->drv_rx_counter = int_fw_status->drv_rx_counter; + fw_status->tx_results_counter = int_fw_status->tx_results_counter; + fw_status->rx_pkt_descs = int_fw_status->rx_pkt_descs; + + fw_status->fw_localtime = le32_to_cpu(int_fw_status->fw_localtime); + fw_status->link_ps_bitmap = le32_to_cpu(int_fw_status->link_ps_bitmap); + fw_status->link_fast_bitmap = + le32_to_cpu(int_fw_status->link_fast_bitmap); + fw_status->total_released_blks = + le32_to_cpu(int_fw_status->total_released_blks); + fw_status->tx_total = le32_to_cpu(int_fw_status->tx_total); + + fw_status->counters.tx_released_pkts = + int_fw_status->counters.tx_released_pkts; + fw_status->counters.tx_lnk_free_pkts = + int_fw_status->counters.tx_lnk_free_pkts; + fw_status->counters.tx_voice_released_blks = + int_fw_status->counters.tx_voice_released_blks; + fw_status->counters.tx_last_rate = + int_fw_status->counters.tx_last_rate; + fw_status->counters.tx_last_rate_mbps = + int_fw_status->counters.tx_last_rate_mbps; + fw_status->counters.hlid = + int_fw_status->counters.hlid; + + fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr); + + fw_status->priv = &int_fw_status->priv; +} + +static void wl18xx_set_tx_desc_csum(struct wl1271 *wl, + struct wl1271_tx_hw_descr *desc, + struct sk_buff *skb) +{ + u32 ip_hdr_offset; + struct iphdr *ip_hdr; + + if (!checksum_param) { + desc->wl18xx_checksum_data = 0; + return; + } + + if (skb->ip_summed != CHECKSUM_PARTIAL) { + desc->wl18xx_checksum_data = 0; + return; + } + + ip_hdr_offset = skb_network_header(skb) - skb_mac_header(skb); + if (WARN_ON(ip_hdr_offset >= (1<<7))) { + desc->wl18xx_checksum_data = 0; + return; + } + + desc->wl18xx_checksum_data = ip_hdr_offset << 1; + + /* FW is interested only in the LSB of the protocol TCP=0 UDP=1 */ + ip_hdr = (void *)skb_network_header(skb); + desc->wl18xx_checksum_data |= (ip_hdr->protocol & 0x01); +} + +static void wl18xx_set_rx_csum(struct wl1271 *wl, + struct wl1271_rx_descriptor *desc, + struct sk_buff *skb) +{ + if (desc->status & WL18XX_RX_CHECKSUM_MASK) + skb->ip_summed = CHECKSUM_UNNECESSARY; +} + +static bool wl18xx_is_mimo_supported(struct wl1271 *wl) +{ + struct wl18xx_priv *priv = wl->priv; + + /* only support MIMO with multiple antennas, and when SISO + * is not forced through config + */ + return (priv->conf.phy.number_of_assembled_ant2_4 >= 2) && + (priv->conf.ht.mode != HT_MODE_WIDE) && + (priv->conf.ht.mode != HT_MODE_SISO20); +} + +/* + * TODO: instead of having these two functions to get the rate mask, + * we should modify the wlvif->rate_set instead + */ +static u32 wl18xx_sta_get_ap_rate_mask(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + u32 hw_rate_set = wlvif->rate_set; + + if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || + wlvif->channel_type == NL80211_CHAN_HT40PLUS) { + wl1271_debug(DEBUG_ACX, "using wide channel rate mask"); + hw_rate_set |= CONF_TX_RATE_USE_WIDE_CHAN; + + /* we don't support MIMO in wide-channel mode */ + hw_rate_set &= ~CONF_TX_MIMO_RATES; + } else if (wl18xx_is_mimo_supported(wl)) { + wl1271_debug(DEBUG_ACX, "using MIMO channel rate mask"); + hw_rate_set |= CONF_TX_MIMO_RATES; + } + + return hw_rate_set; +} + +static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || + wlvif->channel_type == NL80211_CHAN_HT40PLUS) { + wl1271_debug(DEBUG_ACX, "using wide channel rate mask"); + + /* sanity check - we don't support this */ + if (WARN_ON(wlvif->band != NL80211_BAND_5GHZ)) + return 0; + + return CONF_TX_RATE_USE_WIDE_CHAN; + } else if (wl18xx_is_mimo_supported(wl) && + wlvif->band == NL80211_BAND_2GHZ) { + wl1271_debug(DEBUG_ACX, "using MIMO rate mask"); + /* + * we don't care about HT channel here - if a peer doesn't + * support MIMO, we won't enable it in its rates + */ + return CONF_TX_MIMO_RATES; + } else { + return 0; + } +} + +static const char *wl18xx_rdl_name(enum wl18xx_rdl_num rdl_num) +{ + switch (rdl_num) { + case RDL_1_HP: + return "183xH"; + case RDL_2_SP: + return "183x or 180x"; + case RDL_3_HP: + return "187xH"; + case RDL_4_SP: + return "187x"; + case RDL_5_SP: + return "RDL11 - Not Supported"; + case RDL_6_SP: + return "180xD"; + case RDL_7_SP: + return "RDL13 - Not Supported (1893Q)"; + case RDL_8_SP: + return "18xxQ"; + case RDL_NONE: + return "UNTRIMMED"; + default: + return "UNKNOWN"; + } +} + +static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver) +{ + u32 fuse; + s8 rom = 0, metal = 0, pg_ver = 0, rdl_ver = 0, package_type = 0; + int ret; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); + if (ret < 0) + goto out; + + ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_2_3, &fuse); + if (ret < 0) + goto out; + + package_type = (fuse >> WL18XX_PACKAGE_TYPE_OFFSET) & 1; + + ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_1_3, &fuse); + if (ret < 0) + goto out; + + pg_ver = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET; + rom = (fuse & WL18XX_ROM_VER_MASK) >> WL18XX_ROM_VER_OFFSET; + + if ((rom <= 0xE) && (package_type == WL18XX_PACKAGE_TYPE_WSP)) + metal = (fuse & WL18XX_METAL_VER_MASK) >> + WL18XX_METAL_VER_OFFSET; + else + metal = (fuse & WL18XX_NEW_METAL_VER_MASK) >> + WL18XX_NEW_METAL_VER_OFFSET; + + ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_2_3, &fuse); + if (ret < 0) + goto out; + + rdl_ver = (fuse & WL18XX_RDL_VER_MASK) >> WL18XX_RDL_VER_OFFSET; + + wl1271_info("wl18xx HW: %s, PG %d.%d (ROM 0x%x)", + wl18xx_rdl_name(rdl_ver), pg_ver, metal, rom); + + if (ver) + *ver = pg_ver; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); + +out: + return ret; +} + +static int wl18xx_load_conf_file(struct device *dev, struct wlcore_conf *conf, + struct wl18xx_priv_conf *priv_conf, + const char *file) +{ + struct wlcore_conf_file *conf_file; + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, file, dev); + if (ret < 0) { + wl1271_error("could not get configuration binary %s: %d", + file, ret); + return ret; + } + + if (fw->size != WL18XX_CONF_SIZE) { + wl1271_error("%s configuration binary size is wrong, expected %zu got %zu", + file, WL18XX_CONF_SIZE, fw->size); + ret = -EINVAL; + goto out_release; + } + + conf_file = (struct wlcore_conf_file *) fw->data; + + if (conf_file->header.magic != cpu_to_le32(WL18XX_CONF_MAGIC)) { + wl1271_error("configuration binary file magic number mismatch, " + "expected 0x%0x got 0x%0x", WL18XX_CONF_MAGIC, + conf_file->header.magic); + ret = -EINVAL; + goto out_release; + } + + if (conf_file->header.version != cpu_to_le32(WL18XX_CONF_VERSION)) { + wl1271_error("configuration binary file version not supported, " + "expected 0x%08x got 0x%08x", + WL18XX_CONF_VERSION, conf_file->header.version); + ret = -EINVAL; + goto out_release; + } + + memcpy(conf, &conf_file->core, sizeof(*conf)); + memcpy(priv_conf, &conf_file->priv, sizeof(*priv_conf)); + +out_release: + release_firmware(fw); + return ret; +} + +static int wl18xx_conf_init(struct wl1271 *wl, struct device *dev) +{ + struct platform_device *pdev = wl->pdev; + struct wlcore_platdev_data *pdata = dev_get_platdata(&pdev->dev); + struct wl18xx_priv *priv = wl->priv; + + if (wl18xx_load_conf_file(dev, &wl->conf, &priv->conf, + pdata->family->cfg_name) < 0) { + wl1271_warning("falling back to default config"); + + /* apply driver default configuration */ + memcpy(&wl->conf, &wl18xx_conf, sizeof(wl->conf)); + /* apply default private configuration */ + memcpy(&priv->conf, &wl18xx_default_priv_conf, + sizeof(priv->conf)); + } + + return 0; +} + +static int wl18xx_plt_init(struct wl1271 *wl) +{ + int ret; + + /* calibrator based auto/fem detect not supported for 18xx */ + if (wl->plt_mode == PLT_FEM_DETECT) { + wl1271_error("wl18xx_plt_init: PLT FEM_DETECT not supported"); + return -EINVAL; + } + + ret = wlcore_write32(wl, WL18XX_SCR_PAD8, WL18XX_SCR_PAD8_PLT); + if (ret < 0) + return ret; + + return wl->ops->boot(wl); +} + +static int wl18xx_get_mac(struct wl1271 *wl) +{ + u32 mac1, mac2; + int ret; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); + if (ret < 0) + goto out; + + ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1, &mac1); + if (ret < 0) + goto out; + + ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_2, &mac2); + if (ret < 0) + goto out; + + /* these are the two parts of the BD_ADDR */ + wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) + + ((mac1 & 0xff000000) >> 24); + wl->fuse_nic_addr = (mac1 & 0xffffff); + + if (!wl->fuse_oui_addr && !wl->fuse_nic_addr) { + u8 mac[ETH_ALEN]; + + eth_random_addr(mac); + + wl->fuse_oui_addr = (mac[0] << 16) + (mac[1] << 8) + mac[2]; + wl->fuse_nic_addr = (mac[3] << 16) + (mac[4] << 8) + mac[5]; + wl1271_warning("MAC address from fuse not available, using random locally administered addresses."); + } + + ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]); + +out: + return ret; +} + +static int wl18xx_handle_static_data(struct wl1271 *wl, + struct wl1271_static_data *static_data) +{ + struct wl18xx_static_data_priv *static_data_priv = + (struct wl18xx_static_data_priv *) static_data->priv; + + strncpy(wl->chip.phy_fw_ver_str, static_data_priv->phy_version, + sizeof(wl->chip.phy_fw_ver_str)); + + /* make sure the string is NULL-terminated */ + wl->chip.phy_fw_ver_str[sizeof(wl->chip.phy_fw_ver_str) - 1] = '\0'; + + wl1271_info("PHY firmware version: %s", static_data_priv->phy_version); + + return 0; +} + +static int wl18xx_get_spare_blocks(struct wl1271 *wl, bool is_gem) +{ + struct wl18xx_priv *priv = wl->priv; + + /* If we have keys requiring extra spare, indulge them */ + if (priv->extra_spare_key_count) + return WL18XX_TX_HW_EXTRA_BLOCK_SPARE; + + return WL18XX_TX_HW_BLOCK_SPARE; +} + +static int wl18xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key_conf) +{ + struct wl18xx_priv *priv = wl->priv; + bool change_spare = false, special_enc; + int ret; + + wl1271_debug(DEBUG_CRYPT, "extra spare keys before: %d", + priv->extra_spare_key_count); + + special_enc = key_conf->cipher == WL1271_CIPHER_SUITE_GEM || + key_conf->cipher == WLAN_CIPHER_SUITE_TKIP; + + ret = wlcore_set_key(wl, cmd, vif, sta, key_conf); + if (ret < 0) + goto out; + + /* + * when adding the first or removing the last GEM/TKIP key, + * we have to adjust the number of spare blocks. + */ + if (special_enc) { + if (cmd == SET_KEY) { + /* first key */ + change_spare = (priv->extra_spare_key_count == 0); + priv->extra_spare_key_count++; + } else if (cmd == DISABLE_KEY) { + /* last key */ + change_spare = (priv->extra_spare_key_count == 1); + priv->extra_spare_key_count--; + } + } + + wl1271_debug(DEBUG_CRYPT, "extra spare keys after: %d", + priv->extra_spare_key_count); + + if (!change_spare) + goto out; + + /* key is now set, change the spare blocks */ + if (priv->extra_spare_key_count) + ret = wl18xx_set_host_cfg_bitmap(wl, + WL18XX_TX_HW_EXTRA_BLOCK_SPARE); + else + ret = wl18xx_set_host_cfg_bitmap(wl, + WL18XX_TX_HW_BLOCK_SPARE); + +out: + return ret; +} + +static u32 wl18xx_pre_pkt_send(struct wl1271 *wl, + u32 buf_offset, u32 last_len) +{ + if (wl->quirks & WLCORE_QUIRK_TX_PAD_LAST_FRAME) { + struct wl1271_tx_hw_descr *last_desc; + + /* get the last TX HW descriptor written to the aggr buf */ + last_desc = (struct wl1271_tx_hw_descr *)(wl->aggr_buf + + buf_offset - last_len); + + /* the last frame is padded up to an SDIO block */ + last_desc->wl18xx_mem.ctrl &= ~WL18XX_TX_CTRL_NOT_PADDED; + return ALIGN(buf_offset, WL12XX_BUS_BLOCK_SIZE); + } + + /* no modifications */ + return buf_offset; +} + +static void wl18xx_sta_rc_update(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + bool wide = wlvif->rc_update_bw >= IEEE80211_STA_RX_BW_40; + + wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide); + + /* sanity */ + if (WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS)) + return; + + /* ignore the change before association */ + if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) + return; + + /* + * If we started out as wide, we can change the operation mode. If we + * thought this was a 20mhz AP, we have to reconnect + */ + if (wlvif->sta.role_chan_type == NL80211_CHAN_HT40MINUS || + wlvif->sta.role_chan_type == NL80211_CHAN_HT40PLUS) + wl18xx_acx_peer_ht_operation_mode(wl, wlvif->sta.hlid, wide); + else + ieee80211_connection_loss(wl12xx_wlvif_to_vif(wlvif)); +} + +static int wl18xx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + return wl18xx_acx_set_peer_cap(wl, ht_cap, allow_ht_operation, + rate_set, hlid); +} + +static bool wl18xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + struct wl18xx_fw_status_priv *status_priv = + (struct wl18xx_fw_status_priv *)wl->fw_status->priv; + unsigned long suspend_bitmap; + + /* if we don't have the link map yet, assume they all low prio */ + if (!status_priv) + return false; + + /* suspended links are never high priority */ + suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap); + if (test_bit(hlid, &suspend_bitmap)) + return false; + + /* the priority thresholds are taken from FW */ + if (test_bit(hlid, &wl->fw_fast_lnk_map) && + !test_bit(hlid, &wl->ap_fw_ps_map)) + thold = status_priv->tx_fast_link_prio_threshold; + else + thold = status_priv->tx_slow_link_prio_threshold; + + return lnk->allocated_pkts < thold; +} + +static bool wl18xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + struct wl18xx_fw_status_priv *status_priv = + (struct wl18xx_fw_status_priv *)wl->fw_status->priv; + unsigned long suspend_bitmap; + + /* if we don't have the link map yet, assume they all low prio */ + if (!status_priv) + return true; + + suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap); + if (test_bit(hlid, &suspend_bitmap)) + thold = status_priv->tx_suspend_threshold; + else if (test_bit(hlid, &wl->fw_fast_lnk_map) && + !test_bit(hlid, &wl->ap_fw_ps_map)) + thold = status_priv->tx_fast_stop_threshold; + else + thold = status_priv->tx_slow_stop_threshold; + + return lnk->allocated_pkts < thold; +} + +static u32 wl18xx_convert_hwaddr(struct wl1271 *wl, u32 hwaddr) +{ + return hwaddr & ~0x80000000; +} + +static int wl18xx_setup(struct wl1271 *wl); + +static struct wlcore_ops wl18xx_ops = { + .setup = wl18xx_setup, + .identify_chip = wl18xx_identify_chip, + .boot = wl18xx_boot, + .plt_init = wl18xx_plt_init, + .trigger_cmd = wl18xx_trigger_cmd, + .ack_event = wl18xx_ack_event, + .wait_for_event = wl18xx_wait_for_event, + .process_mailbox_events = wl18xx_process_mailbox_events, + .calc_tx_blocks = wl18xx_calc_tx_blocks, + .set_tx_desc_blocks = wl18xx_set_tx_desc_blocks, + .set_tx_desc_data_len = wl18xx_set_tx_desc_data_len, + .get_rx_buf_align = wl18xx_get_rx_buf_align, + .get_rx_packet_len = wl18xx_get_rx_packet_len, + .tx_immediate_compl = wl18xx_tx_immediate_completion, + .tx_delayed_compl = NULL, + .hw_init = wl18xx_hw_init, + .convert_fw_status = wl18xx_convert_fw_status, + .set_tx_desc_csum = wl18xx_set_tx_desc_csum, + .get_pg_ver = wl18xx_get_pg_ver, + .set_rx_csum = wl18xx_set_rx_csum, + .sta_get_ap_rate_mask = wl18xx_sta_get_ap_rate_mask, + .ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask, + .get_mac = wl18xx_get_mac, + .debugfs_init = wl18xx_debugfs_add_files, + .scan_start = wl18xx_scan_start, + .scan_stop = wl18xx_scan_stop, + .sched_scan_start = wl18xx_sched_scan_start, + .sched_scan_stop = wl18xx_scan_sched_scan_stop, + .handle_static_data = wl18xx_handle_static_data, + .get_spare_blocks = wl18xx_get_spare_blocks, + .set_key = wl18xx_set_key, + .channel_switch = wl18xx_cmd_channel_switch, + .pre_pkt_send = wl18xx_pre_pkt_send, + .sta_rc_update = wl18xx_sta_rc_update, + .set_peer_cap = wl18xx_set_peer_cap, + .convert_hwaddr = wl18xx_convert_hwaddr, + .lnk_high_prio = wl18xx_lnk_high_prio, + .lnk_low_prio = wl18xx_lnk_low_prio, + .smart_config_start = wl18xx_cmd_smart_config_start, + .smart_config_stop = wl18xx_cmd_smart_config_stop, + .smart_config_set_group_key = wl18xx_cmd_smart_config_set_group_key, + .interrupt_notify = wl18xx_acx_interrupt_notify_config, + .rx_ba_filter = wl18xx_acx_rx_ba_filter, + .ap_sleep = wl18xx_acx_ap_sleep, + .set_cac = wl18xx_cmd_set_cac, + .dfs_master_restart = wl18xx_cmd_dfs_master_restart, +}; + +/* HT cap appropriate for wide channels in 2Ghz */ +static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = { + .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40 | + IEEE80211_HT_CAP_GRN_FLD, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(150), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + +/* HT cap appropriate for wide channels in 5Ghz */ +static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = { + .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(150), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + +/* HT cap appropriate for SISO 20 */ +static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = { + .cap = IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_GRN_FLD, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(72), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + +/* HT cap appropriate for MIMO rates in 20mhz channel */ +static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = { + .cap = IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_GRN_FLD, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(144), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + +static const struct ieee80211_iface_limit wl18xx_iface_limits[] = { + { + .max = 2, + .types = BIT(NL80211_IFTYPE_STATION), + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_AP) + | BIT(NL80211_IFTYPE_P2P_GO) + | BIT(NL80211_IFTYPE_P2P_CLIENT) +#ifdef CONFIG_MAC80211_MESH + | BIT(NL80211_IFTYPE_MESH_POINT) +#endif + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_DEVICE), + }, +}; + +static const struct ieee80211_iface_limit wl18xx_iface_ap_limits[] = { + { + .max = 2, + .types = BIT(NL80211_IFTYPE_AP), + }, +#ifdef CONFIG_MAC80211_MESH + { + .max = 1, + .types = BIT(NL80211_IFTYPE_MESH_POINT), + }, +#endif + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_DEVICE), + }, +}; + +static const struct ieee80211_iface_combination +wl18xx_iface_combinations[] = { + { + .max_interfaces = 3, + .limits = wl18xx_iface_limits, + .n_limits = ARRAY_SIZE(wl18xx_iface_limits), + .num_different_channels = 2, + }, + { + .max_interfaces = 2, + .limits = wl18xx_iface_ap_limits, + .n_limits = ARRAY_SIZE(wl18xx_iface_ap_limits), + .num_different_channels = 1, + .radar_detect_widths = BIT(NL80211_CHAN_NO_HT) | + BIT(NL80211_CHAN_HT20) | + BIT(NL80211_CHAN_HT40MINUS) | + BIT(NL80211_CHAN_HT40PLUS), + } +}; + +static int wl18xx_setup(struct wl1271 *wl) +{ + struct wl18xx_priv *priv = wl->priv; + int ret; + + BUILD_BUG_ON(WL18XX_MAX_LINKS > WLCORE_MAX_LINKS); + BUILD_BUG_ON(WL18XX_MAX_AP_STATIONS > WL18XX_MAX_LINKS); + BUILD_BUG_ON(WL18XX_CONF_SG_PARAMS_MAX > WLCORE_CONF_SG_PARAMS_MAX); + + wl->rtable = wl18xx_rtable; + wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; + wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS; + wl->num_links = WL18XX_MAX_LINKS; + wl->max_ap_stations = WL18XX_MAX_AP_STATIONS; + wl->iface_combinations = wl18xx_iface_combinations; + wl->n_iface_combinations = ARRAY_SIZE(wl18xx_iface_combinations); + wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES; + wl->band_rate_to_idx = wl18xx_band_rate_to_idx; + wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX; + wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0; + wl->fw_status_len = sizeof(struct wl18xx_fw_status); + wl->fw_status_priv_len = sizeof(struct wl18xx_fw_status_priv); + wl->stats.fw_stats_len = sizeof(struct wl18xx_acx_statistics); + wl->static_data_priv_len = sizeof(struct wl18xx_static_data_priv); + + if (num_rx_desc_param != -1) + wl->num_rx_desc = num_rx_desc_param; + + ret = wl18xx_conf_init(wl, wl->dev); + if (ret < 0) + return ret; + + /* If the module param is set, update it in conf */ + if (board_type_param) { + if (!strcmp(board_type_param, "fpga")) { + priv->conf.phy.board_type = BOARD_TYPE_FPGA_18XX; + } else if (!strcmp(board_type_param, "hdk")) { + priv->conf.phy.board_type = BOARD_TYPE_HDK_18XX; + } else if (!strcmp(board_type_param, "dvp")) { + priv->conf.phy.board_type = BOARD_TYPE_DVP_18XX; + } else if (!strcmp(board_type_param, "evb")) { + priv->conf.phy.board_type = BOARD_TYPE_EVB_18XX; + } else if (!strcmp(board_type_param, "com8")) { + priv->conf.phy.board_type = BOARD_TYPE_COM8_18XX; + } else { + wl1271_error("invalid board type '%s'", + board_type_param); + return -EINVAL; + } + } + + if (priv->conf.phy.board_type >= NUM_BOARD_TYPES) { + wl1271_error("invalid board type '%d'", + priv->conf.phy.board_type); + return -EINVAL; + } + + if (low_band_component_param != -1) + priv->conf.phy.low_band_component = low_band_component_param; + if (low_band_component_type_param != -1) + priv->conf.phy.low_band_component_type = + low_band_component_type_param; + if (high_band_component_param != -1) + priv->conf.phy.high_band_component = high_band_component_param; + if (high_band_component_type_param != -1) + priv->conf.phy.high_band_component_type = + high_band_component_type_param; + if (pwr_limit_reference_11_abg_param != -1) + priv->conf.phy.pwr_limit_reference_11_abg = + pwr_limit_reference_11_abg_param; + if (n_antennas_2_param != -1) + priv->conf.phy.number_of_assembled_ant2_4 = n_antennas_2_param; + if (n_antennas_5_param != -1) + priv->conf.phy.number_of_assembled_ant5 = n_antennas_5_param; + if (dc2dc_param != -1) + priv->conf.phy.external_pa_dc2dc = dc2dc_param; + + if (ht_mode_param) { + if (!strcmp(ht_mode_param, "default")) + priv->conf.ht.mode = HT_MODE_DEFAULT; + else if (!strcmp(ht_mode_param, "wide")) + priv->conf.ht.mode = HT_MODE_WIDE; + else if (!strcmp(ht_mode_param, "siso20")) + priv->conf.ht.mode = HT_MODE_SISO20; + else { + wl1271_error("invalid ht_mode '%s'", ht_mode_param); + return -EINVAL; + } + } + + if (priv->conf.ht.mode == HT_MODE_DEFAULT) { + /* + * Only support mimo with multiple antennas. Fall back to + * siso40. + */ + if (wl18xx_is_mimo_supported(wl)) + wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, + &wl18xx_mimo_ht_cap_2ghz); + else + wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, + &wl18xx_siso40_ht_cap_2ghz); + + /* 5Ghz is always wide */ + wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, + &wl18xx_siso40_ht_cap_5ghz); + } else if (priv->conf.ht.mode == HT_MODE_WIDE) { + wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, + &wl18xx_siso40_ht_cap_2ghz); + wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, + &wl18xx_siso40_ht_cap_5ghz); + } else if (priv->conf.ht.mode == HT_MODE_SISO20) { + wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, + &wl18xx_siso20_ht_cap); + wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, + &wl18xx_siso20_ht_cap); + } + + if (!checksum_param) { + wl18xx_ops.set_rx_csum = NULL; + wl18xx_ops.init_vif = NULL; + } + + /* Enable 11a Band only if we have 5G antennas */ + wl->enable_11a = (priv->conf.phy.number_of_assembled_ant5 != 0); + + return 0; +} + +static int wl18xx_probe(struct platform_device *pdev) +{ + struct wl1271 *wl; + struct ieee80211_hw *hw; + int ret; + + hw = wlcore_alloc_hw(sizeof(struct wl18xx_priv), + WL18XX_AGGR_BUFFER_SIZE, + sizeof(struct wl18xx_event_mailbox)); + if (IS_ERR(hw)) { + wl1271_error("can't allocate hw"); + ret = PTR_ERR(hw); + goto out; + } + + wl = hw->priv; + wl->ops = &wl18xx_ops; + wl->ptable = wl18xx_ptable; + ret = wlcore_probe(wl, pdev); + if (ret) + goto out_free; + + return ret; + +out_free: + wlcore_free_hw(wl); +out: + return ret; +} + +static const struct platform_device_id wl18xx_id_table[] = { + { "wl18xx", 0 }, + { } /* Terminating Entry */ +}; +MODULE_DEVICE_TABLE(platform, wl18xx_id_table); + +static struct platform_driver wl18xx_driver = { + .probe = wl18xx_probe, + .remove = wlcore_remove, + .id_table = wl18xx_id_table, + .driver = { + .name = "wl18xx_driver", + } +}; + +module_platform_driver(wl18xx_driver); +module_param_named(ht_mode, ht_mode_param, charp, 0400); +MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or siso20"); + +module_param_named(board_type, board_type_param, charp, 0400); +MODULE_PARM_DESC(board_type, "Board type: fpga, hdk (default), evb, com8 or " + "dvp"); + +module_param_named(checksum, checksum_param, bool, 0400); +MODULE_PARM_DESC(checksum, "Enable TCP checksum: boolean (defaults to false)"); + +module_param_named(dc2dc, dc2dc_param, int, 0400); +MODULE_PARM_DESC(dc2dc, "External DC2DC: u8 (defaults to 0)"); + +module_param_named(n_antennas_2, n_antennas_2_param, int, 0400); +MODULE_PARM_DESC(n_antennas_2, + "Number of installed 2.4GHz antennas: 1 (default) or 2"); + +module_param_named(n_antennas_5, n_antennas_5_param, int, 0400); +MODULE_PARM_DESC(n_antennas_5, + "Number of installed 5GHz antennas: 1 (default) or 2"); + +module_param_named(low_band_component, low_band_component_param, int, 0400); +MODULE_PARM_DESC(low_band_component, "Low band component: u8 " + "(default is 0x01)"); + +module_param_named(low_band_component_type, low_band_component_type_param, + int, 0400); +MODULE_PARM_DESC(low_band_component_type, "Low band component type: u8 " + "(default is 0x05 or 0x06 depending on the board_type)"); + +module_param_named(high_band_component, high_band_component_param, int, 0400); +MODULE_PARM_DESC(high_band_component, "High band component: u8, " + "(default is 0x01)"); + +module_param_named(high_band_component_type, high_band_component_type_param, + int, 0400); +MODULE_PARM_DESC(high_band_component_type, "High band component type: u8 " + "(default is 0x09)"); + +module_param_named(pwr_limit_reference_11_abg, + pwr_limit_reference_11_abg_param, int, 0400); +MODULE_PARM_DESC(pwr_limit_reference_11_abg, "Power limit reference: u8 " + "(default is 0xc8)"); + +module_param_named(num_rx_desc, num_rx_desc_param, int, 0400); +MODULE_PARM_DESC(num_rx_desc_param, + "Number of Rx descriptors: u8 (default is 32)"); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); +MODULE_FIRMWARE(WL18XX_FW_NAME); diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h new file mode 100644 index 0000000000..2f70dbdae7 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/reg.h @@ -0,0 +1,235 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wlcore + * + * Copyright (C) 2011 Texas Instruments Inc. + */ + +#ifndef __REG_H__ +#define __REG_H__ + +#define WL18XX_REGISTERS_BASE 0x00800000 +#define WL18XX_CODE_BASE 0x00000000 +#define WL18XX_DATA_BASE 0x00400000 +#define WL18XX_DOUBLE_BUFFER_BASE 0x00600000 +#define WL18XX_MCU_KEY_SEARCH_BASE 0x00700000 +#define WL18XX_PHY_BASE 0x00900000 +#define WL18XX_TOP_OCP_BASE 0x00A00000 +#define WL18XX_PACKET_RAM_BASE 0x00B00000 +#define WL18XX_HOST_BASE 0x00C00000 + +#define WL18XX_REGISTERS_DOWN_SIZE 0x0000B000 + +#define WL18XX_REG_BOOT_PART_START 0x00802000 +#define WL18XX_REG_BOOT_PART_SIZE 0x00014578 + +#define WL18XX_PHY_INIT_MEM_ADDR 0x80926000 +#define WL18XX_PHY_END_MEM_ADDR 0x8093CA44 +#define WL18XX_PHY_INIT_MEM_SIZE \ + (WL18XX_PHY_END_MEM_ADDR - WL18XX_PHY_INIT_MEM_ADDR) + +#define WL18XX_SDIO_WSPI_BASE (WL18XX_REGISTERS_BASE) +#define WL18XX_REG_CONFIG_BASE (WL18XX_REGISTERS_BASE + 0x02000) +#define WL18XX_WGCM_REGS_BASE (WL18XX_REGISTERS_BASE + 0x03000) +#define WL18XX_ENC_BASE (WL18XX_REGISTERS_BASE + 0x04000) +#define WL18XX_INTERRUPT_BASE (WL18XX_REGISTERS_BASE + 0x05000) +#define WL18XX_UART_BASE (WL18XX_REGISTERS_BASE + 0x06000) +#define WL18XX_WELP_BASE (WL18XX_REGISTERS_BASE + 0x07000) +#define WL18XX_TCP_CKSM_BASE (WL18XX_REGISTERS_BASE + 0x08000) +#define WL18XX_FIFO_BASE (WL18XX_REGISTERS_BASE + 0x09000) +#define WL18XX_OCP_BRIDGE_BASE (WL18XX_REGISTERS_BASE + 0x0A000) +#define WL18XX_PMAC_RX_BASE (WL18XX_REGISTERS_BASE + 0x14800) +#define WL18XX_PMAC_ACM_BASE (WL18XX_REGISTERS_BASE + 0x14C00) +#define WL18XX_PMAC_TX_BASE (WL18XX_REGISTERS_BASE + 0x15000) +#define WL18XX_PMAC_CSR_BASE (WL18XX_REGISTERS_BASE + 0x15400) + +#define WL18XX_REG_ECPU_CONTROL (WL18XX_REGISTERS_BASE + 0x02004) +#define WL18XX_REG_INTERRUPT_NO_CLEAR (WL18XX_REGISTERS_BASE + 0x050E8) +#define WL18XX_REG_INTERRUPT_ACK (WL18XX_REGISTERS_BASE + 0x050F0) +#define WL18XX_REG_INTERRUPT_TRIG (WL18XX_REGISTERS_BASE + 0x5074) +#define WL18XX_REG_INTERRUPT_TRIG_H (WL18XX_REGISTERS_BASE + 0x5078) +#define WL18XX_REG_INTERRUPT_MASK (WL18XX_REGISTERS_BASE + 0x0050DC) + +#define WL18XX_REG_CHIP_ID_B (WL18XX_REGISTERS_BASE + 0x01542C) + +#define WL18XX_SLV_MEM_DATA (WL18XX_HOST_BASE + 0x0018) +#define WL18XX_SLV_REG_DATA (WL18XX_HOST_BASE + 0x0008) + +/* Scratch Pad registers*/ +#define WL18XX_SCR_PAD0 (WL18XX_REGISTERS_BASE + 0x0154EC) +#define WL18XX_SCR_PAD1 (WL18XX_REGISTERS_BASE + 0x0154F0) +#define WL18XX_SCR_PAD2 (WL18XX_REGISTERS_BASE + 0x0154F4) +#define WL18XX_SCR_PAD3 (WL18XX_REGISTERS_BASE + 0x0154F8) +#define WL18XX_SCR_PAD4 (WL18XX_REGISTERS_BASE + 0x0154FC) +#define WL18XX_SCR_PAD4_SET (WL18XX_REGISTERS_BASE + 0x015504) +#define WL18XX_SCR_PAD4_CLR (WL18XX_REGISTERS_BASE + 0x015500) +#define WL18XX_SCR_PAD5 (WL18XX_REGISTERS_BASE + 0x015508) +#define WL18XX_SCR_PAD5_SET (WL18XX_REGISTERS_BASE + 0x015510) +#define WL18XX_SCR_PAD5_CLR (WL18XX_REGISTERS_BASE + 0x01550C) +#define WL18XX_SCR_PAD6 (WL18XX_REGISTERS_BASE + 0x015514) +#define WL18XX_SCR_PAD7 (WL18XX_REGISTERS_BASE + 0x015518) +#define WL18XX_SCR_PAD8 (WL18XX_REGISTERS_BASE + 0x01551C) +#define WL18XX_SCR_PAD9 (WL18XX_REGISTERS_BASE + 0x015520) + +/* Spare registers*/ +#define WL18XX_SPARE_A1 (WL18XX_REGISTERS_BASE + 0x002194) +#define WL18XX_SPARE_A2 (WL18XX_REGISTERS_BASE + 0x002198) +#define WL18XX_SPARE_A3 (WL18XX_REGISTERS_BASE + 0x00219C) +#define WL18XX_SPARE_A4 (WL18XX_REGISTERS_BASE + 0x0021A0) +#define WL18XX_SPARE_A5 (WL18XX_REGISTERS_BASE + 0x0021A4) +#define WL18XX_SPARE_A6 (WL18XX_REGISTERS_BASE + 0x0021A8) +#define WL18XX_SPARE_A7 (WL18XX_REGISTERS_BASE + 0x0021AC) +#define WL18XX_SPARE_A8 (WL18XX_REGISTERS_BASE + 0x0021B0) +#define WL18XX_SPARE_B1 (WL18XX_REGISTERS_BASE + 0x015524) +#define WL18XX_SPARE_B2 (WL18XX_REGISTERS_BASE + 0x015528) +#define WL18XX_SPARE_B3 (WL18XX_REGISTERS_BASE + 0x01552C) +#define WL18XX_SPARE_B4 (WL18XX_REGISTERS_BASE + 0x015530) +#define WL18XX_SPARE_B5 (WL18XX_REGISTERS_BASE + 0x015534) +#define WL18XX_SPARE_B6 (WL18XX_REGISTERS_BASE + 0x015538) +#define WL18XX_SPARE_B7 (WL18XX_REGISTERS_BASE + 0x01553C) +#define WL18XX_SPARE_B8 (WL18XX_REGISTERS_BASE + 0x015540) + +#define WL18XX_REG_COMMAND_MAILBOX_PTR (WL18XX_SCR_PAD0) +#define WL18XX_REG_EVENT_MAILBOX_PTR (WL18XX_SCR_PAD1) +#define WL18XX_EEPROMLESS_IND (WL18XX_SCR_PAD4) + +#define WL18XX_WELP_ARM_COMMAND (WL18XX_REGISTERS_BASE + 0x7100) +#define WL18XX_ENABLE (WL18XX_REGISTERS_BASE + 0x01543C) +#define TOP_FN0_CCCR_REG_32 (WL18XX_TOP_OCP_BASE + 0x64) + +/* PRCM registers */ +#define PLATFORM_DETECTION 0xA0E3E0 +#define OCS_EN 0xA02080 +#define PRIMARY_CLK_DETECT 0xA020A6 +#define PLLSH_COEX_PLL_N 0xA02384 +#define PLLSH_COEX_PLL_M 0xA02382 +#define PLLSH_COEX_PLL_SWALLOW_EN 0xA0238E +#define PLLSH_WL_PLL_SEL 0xA02398 + +#define PLLSH_WCS_PLL_N 0xA02362 +#define PLLSH_WCS_PLL_M 0xA02360 +#define PLLSH_WCS_PLL_Q_FACTOR_CFG_1 0xA02364 +#define PLLSH_WCS_PLL_Q_FACTOR_CFG_2 0xA02366 +#define PLLSH_WCS_PLL_P_FACTOR_CFG_1 0xA02368 +#define PLLSH_WCS_PLL_P_FACTOR_CFG_2 0xA0236A +#define PLLSH_WCS_PLL_SWALLOW_EN 0xA0236C +#define PLLSH_WL_PLL_EN 0xA02392 + +#define PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK 0xFFFF +#define PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK 0x007F +#define PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK 0xFFFF +#define PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK 0x000F + +#define PLLSH_WL_PLL_EN_VAL1 0x7 +#define PLLSH_WL_PLL_EN_VAL2 0x2 +#define PLLSH_COEX_PLL_SWALLOW_EN_VAL1 0x2 +#define PLLSH_COEX_PLL_SWALLOW_EN_VAL2 0x11 + +#define PLLSH_WCS_PLL_SWALLOW_EN_VAL1 0x1 +#define PLLSH_WCS_PLL_SWALLOW_EN_VAL2 0x12 + +#define PLLSH_WL_PLL_SEL_WCS_PLL 0x0 +#define PLLSH_WL_PLL_SEL_COEX_PLL 0x1 + +#define WL18XX_REG_FUSE_DATA_1_3 0xA0260C +#define WL18XX_PG_VER_MASK 0x70 +#define WL18XX_PG_VER_OFFSET 4 +#define WL18XX_ROM_VER_MASK 0x3e00 +#define WL18XX_ROM_VER_OFFSET 9 +#define WL18XX_METAL_VER_MASK 0xC +#define WL18XX_METAL_VER_OFFSET 2 +#define WL18XX_NEW_METAL_VER_MASK 0x180 +#define WL18XX_NEW_METAL_VER_OFFSET 7 + +#define WL18XX_PACKAGE_TYPE_OFFSET 13 +#define WL18XX_PACKAGE_TYPE_WSP 0 + +#define WL18XX_REG_FUSE_DATA_2_3 0xA02614 +#define WL18XX_RDL_VER_MASK 0x1f00 +#define WL18XX_RDL_VER_OFFSET 8 + +#define WL18XX_REG_FUSE_BD_ADDR_1 0xA02602 +#define WL18XX_REG_FUSE_BD_ADDR_2 0xA02606 + +#define WL18XX_CMD_MBOX_ADDRESS 0xB007B4 + +#define WL18XX_FW_STATUS_ADDR 0x50F8 + +#define CHIP_ID_185x_PG10 (0x06030101) +#define CHIP_ID_185x_PG20 (0x06030111) + +/* + * Host Command Interrupt. Setting this bit masks + * the interrupt that the host issues to inform + * the FW that it has sent a command + * to the Wlan hardware Command Mailbox. + */ +#define WL18XX_INTR_TRIG_CMD BIT(28) + +/* + * Host Event Acknowlegde Interrupt. The host + * sets this bit to acknowledge that it received + * the unsolicited information from the event + * mailbox. + */ +#define WL18XX_INTR_TRIG_EVENT_ACK BIT(29) + +/* + * To boot the firmware in PLT mode we need to write this value in + * SCR_PAD8 before starting. + */ +#define WL18XX_SCR_PAD8_PLT 0xBABABEBE + +enum { + COMPONENT_NO_SWITCH = 0x0, + COMPONENT_2_WAY_SWITCH = 0x1, + COMPONENT_3_WAY_SWITCH = 0x2, + COMPONENT_MATCHING = 0x3, +}; + +enum { + FEM_NONE = 0x0, + FEM_VENDOR_1 = 0x1, + FEM_VENDOR_2 = 0x2, + FEM_VENDOR_3 = 0x3, +}; + +enum { + BOARD_TYPE_EVB_18XX = 0, + BOARD_TYPE_DVP_18XX = 1, + BOARD_TYPE_HDK_18XX = 2, + BOARD_TYPE_FPGA_18XX = 3, + BOARD_TYPE_COM8_18XX = 4, + + NUM_BOARD_TYPES, +}; + +enum wl18xx_rdl_num { + RDL_NONE = 0, + RDL_1_HP = 1, + RDL_2_SP = 2, + RDL_3_HP = 3, + RDL_4_SP = 4, + RDL_5_SP = 0x11, + RDL_6_SP = 0x12, + RDL_7_SP = 0x13, + RDL_8_SP = 0x14, + + _RDL_LAST, + RDL_MAX = _RDL_LAST - 1, +}; + + +/* FPGA_SPARE_1 register - used to change the PHY ATPG clock at boot time */ +#define WL18XX_PHY_FPGA_SPARE_1 0x8093CA40 + +/* command to disable FDSP clock */ +#define MEM_FDSP_CLK_120_DISABLE 0x80000000 + +/* command to set ATPG clock toward FDSP Code RAM rather than its own clock */ +#define MEM_FDSP_CODERAM_FUNC_CLK_SEL 0xC0000000 + +/* command to re-enable FDSP clock */ +#define MEM_FDSP_CLK_120_ENABLE 0x40000000 + +#endif /* __REG_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c new file mode 100644 index 0000000000..d9f4b715ab --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + */ + +#include <linux/ieee80211.h> +#include "scan.h" +#include "../wlcore/debug.h" + +static void wl18xx_adjust_channels(struct wl18xx_cmd_scan_params *cmd, + struct wlcore_scan_channels *cmd_channels) +{ + memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive)); + memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active)); + cmd->dfs = cmd_channels->dfs; + cmd->passive_active = cmd_channels->passive_active; + + memcpy(cmd->channels_2, cmd_channels->channels_2, + sizeof(cmd->channels_2)); + memcpy(cmd->channels_5, cmd_channels->channels_5, + sizeof(cmd->channels_5)); + /* channels_4 are not supported, so no need to copy them */ +} + +static int wl18xx_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req) +{ + struct wl18xx_cmd_scan_params *cmd; + struct wlcore_scan_channels *cmd_channels = NULL; + int ret; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + /* scan on the dev role if the regular one is not started */ + if (wlcore_is_p2p_mgmt(wlvif)) + cmd->role_id = wlvif->dev_role_id; + else + cmd->role_id = wlvif->role_id; + + if (WARN_ON(cmd->role_id == WL12XX_INVALID_ROLE_ID)) { + ret = -EINVAL; + goto out; + } + + cmd->scan_type = SCAN_TYPE_SEARCH; + cmd->rssi_threshold = -127; + cmd->snr_threshold = 0; + + cmd->bss_type = SCAN_BSS_TYPE_ANY; + + cmd->ssid_from_list = 0; + cmd->filter = 0; + cmd->add_broadcast = 0; + + cmd->urgency = 0; + cmd->protect = 0; + + cmd->n_probe_reqs = wl->conf.scan.num_probe_reqs; + cmd->terminate_after = 0; + + /* configure channels */ + WARN_ON(req->n_ssids > 1); + + cmd_channels = kzalloc(sizeof(*cmd_channels), GFP_KERNEL); + if (!cmd_channels) { + ret = -ENOMEM; + goto out; + } + + wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, + req->n_channels, req->n_ssids, + SCAN_TYPE_SEARCH); + wl18xx_adjust_channels(cmd, cmd_channels); + + /* + * all the cycles params (except total cycles) should + * remain 0 for normal scan + */ + cmd->total_cycles = 1; + + if (req->no_cck) + cmd->rate = WL18XX_SCAN_RATE_6; + + cmd->tag = WL1271_SCAN_DEFAULT_TAG; + + if (req->n_ssids) { + cmd->ssid_len = req->ssids[0].ssid_len; + memcpy(cmd->ssid, req->ssids[0].ssid, cmd->ssid_len); + } + + /* TODO: per-band ies? */ + if (cmd->active[0]) { + u8 band = NL80211_BAND_2GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + req->ie, + req->ie_len, + NULL, + 0, + false); + if (ret < 0) { + wl1271_error("2.4GHz PROBE request template failed"); + goto out; + } + } + + if (cmd->active[1] || cmd->dfs) { + u8 band = NL80211_BAND_5GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + req->ie, + req->ie_len, + NULL, + 0, + false); + if (ret < 0) { + wl1271_error("5GHz PROBE request template failed"); + goto out; + } + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd_channels); + kfree(cmd); + return ret; +} + +void wl18xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + wl->scan.failed = false; + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); +} + +static +int wl18xx_scan_sched_scan_config(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_scan_ies *ies) +{ + struct wl18xx_cmd_scan_params *cmd; + struct wlcore_scan_channels *cmd_channels = NULL; + struct conf_sched_scan_settings *c = &wl->conf.sched_scan; + int ret; + int filter_type; + + wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); + + filter_type = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req); + if (filter_type < 0) + return filter_type; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + + if (WARN_ON(cmd->role_id == WL12XX_INVALID_ROLE_ID)) { + ret = -EINVAL; + goto out; + } + + cmd->scan_type = SCAN_TYPE_PERIODIC; + cmd->rssi_threshold = c->rssi_threshold; + cmd->snr_threshold = c->snr_threshold; + + /* don't filter on BSS type */ + cmd->bss_type = SCAN_BSS_TYPE_ANY; + + cmd->ssid_from_list = 1; + if (filter_type == SCAN_SSID_FILTER_LIST) + cmd->filter = 1; + cmd->add_broadcast = 0; + + cmd->urgency = 0; + cmd->protect = 0; + + cmd->n_probe_reqs = c->num_probe_reqs; + /* don't stop scanning automatically when something is found */ + cmd->terminate_after = 0; + + cmd_channels = kzalloc(sizeof(*cmd_channels), GFP_KERNEL); + if (!cmd_channels) { + ret = -ENOMEM; + goto out; + } + + /* configure channels */ + wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, + req->n_channels, req->n_ssids, + SCAN_TYPE_PERIODIC); + wl18xx_adjust_channels(cmd, cmd_channels); + + if (c->num_short_intervals && c->long_interval && + c->long_interval > req->scan_plans[0].interval * MSEC_PER_SEC) { + cmd->short_cycles_msec = + cpu_to_le16(req->scan_plans[0].interval * MSEC_PER_SEC); + cmd->long_cycles_msec = cpu_to_le16(c->long_interval); + cmd->short_cycles_count = c->num_short_intervals; + } else { + cmd->short_cycles_msec = 0; + cmd->long_cycles_msec = + cpu_to_le16(req->scan_plans[0].interval * MSEC_PER_SEC); + cmd->short_cycles_count = 0; + } + wl1271_debug(DEBUG_SCAN, "short_interval: %d, long_interval: %d, num_short: %d", + le16_to_cpu(cmd->short_cycles_msec), + le16_to_cpu(cmd->long_cycles_msec), + cmd->short_cycles_count); + + cmd->total_cycles = 0; + + cmd->tag = WL1271_SCAN_DEFAULT_TAG; + + /* create a PERIODIC_SCAN_REPORT_EVENT whenever we've got a match */ + cmd->report_threshold = 1; + cmd->terminate_on_report = 0; + + if (cmd->active[0]) { + u8 band = NL80211_BAND_2GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + ies->ies[band], + ies->len[band], + ies->common_ies, + ies->common_ie_len, + true); + if (ret < 0) { + wl1271_error("2.4GHz PROBE request template failed"); + goto out; + } + } + + if (cmd->active[1] || cmd->dfs) { + u8 band = NL80211_BAND_5GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + ies->ies[band], + ies->len[band], + ies->common_ies, + ies->common_ie_len, + true); + if (ret < 0) { + wl1271_error("5GHz PROBE request template failed"); + goto out; + } + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd_channels); + kfree(cmd); + return ret; +} + +int wl18xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_scan_ies *ies) +{ + return wl18xx_scan_sched_scan_config(wl, wlvif, req, ies); +} + +static int __wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 scan_type) +{ + struct wl18xx_cmd_scan_stop *stop; + int ret; + + wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); + + stop = kzalloc(sizeof(*stop), GFP_KERNEL); + if (!stop) { + wl1271_error("failed to alloc memory to send sched scan stop"); + return -ENOMEM; + } + + stop->role_id = wlvif->role_id; + stop->scan_type = scan_type; + + ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, stop, sizeof(*stop), 0); + if (ret < 0) { + wl1271_error("failed to send sched scan stop command"); + goto out_free; + } + +out_free: + kfree(stop); + return ret; +} + +void wl18xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + __wl18xx_scan_stop(wl, wlvif, SCAN_TYPE_PERIODIC); +} +int wl18xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req) +{ + return wl18xx_scan_send(wl, wlvif, req); +} + +int wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + return __wl18xx_scan_stop(wl, wlvif, SCAN_TYPE_SEARCH); +} diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h new file mode 100644 index 0000000000..59623ecd18 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/scan.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + */ + +#ifndef __WL18XX_SCAN_H__ +#define __WL18XX_SCAN_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/cmd.h" +#include "../wlcore/scan.h" + +struct tracking_ch_params { + struct conn_scan_ch_params channel; + + __le32 bssid_lsb; + __le16 bssid_msb; + + u8 padding[2]; +} __packed; + +/* probe request rate */ +enum +{ + WL18XX_SCAN_RATE_1 = 0, + WL18XX_SCAN_RATE_5_5 = 1, + WL18XX_SCAN_RATE_6 = 2, +}; + +#define WL18XX_MAX_CHANNELS_5GHZ 32 + +struct wl18xx_cmd_scan_params { + struct wl1271_cmd_header header; + + u8 role_id; + u8 scan_type; + + s8 rssi_threshold; /* for filtering (in dBm) */ + s8 snr_threshold; /* for filtering (in dB) */ + + u8 bss_type; /* for filtering */ + u8 ssid_from_list; /* use ssid from configured ssid list */ + u8 filter; /* forward only results with matching ssids */ + + /* + * add broadcast ssid in addition to the configured ssids. + * the driver should add dummy entry for it (?). + */ + u8 add_broadcast; + + u8 urgency; + u8 protect; /* ??? */ + u8 n_probe_reqs; /* Number of probes requests per channel */ + u8 terminate_after; /* early terminate scan operation */ + + u8 passive[SCAN_MAX_BANDS]; /* number of passive scan channels */ + u8 active[SCAN_MAX_BANDS]; /* number of active scan channels */ + u8 dfs; /* number of dfs channels in 5ghz */ + u8 passive_active; /* number of passive before active channels 2.4ghz */ + + __le16 short_cycles_msec; + __le16 long_cycles_msec; + u8 short_cycles_count; + u8 total_cycles; /* 0 - infinite */ + u8 padding[2]; + + union { + struct { + struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; + struct conn_scan_ch_params channels_5[WL18XX_MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; + }; + struct tracking_ch_params channels_tracking[WL1271_SCAN_MAX_CHANNELS]; + } ; + + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ + u8 tag; + u8 rate; + + /* send SCAN_REPORT_EVENT in periodic scans after each cycle + * if number of results >= report_threshold. Must be 0 for + * non periodic scans + */ + u8 report_threshold; + + /* Should periodic scan stop after a report event was created. + * Must be 0 for non periodic scans. + */ + u8 terminate_on_report; + + u8 padding1[3]; +} __packed; + +struct wl18xx_cmd_scan_stop { + struct wl1271_cmd_header header; + + u8 role_id; + u8 scan_type; + u8 padding[2]; +} __packed; + +int wl18xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req); +int wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +void wl18xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl18xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_scan_ies *ies); +void wl18xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +#endif diff --git a/drivers/net/wireless/ti/wl18xx/tx.c b/drivers/net/wireless/ti/wl18xx/tx.c new file mode 100644 index 0000000000..55d9b0861c --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/tx.c @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + */ + +#include "../wlcore/wlcore.h" +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" +#include "../wlcore/acx.h" +#include "../wlcore/tx.h" + +#include "wl18xx.h" +#include "tx.h" + +static +void wl18xx_get_last_tx_rate(struct wl1271 *wl, struct ieee80211_vif *vif, + u8 band, struct ieee80211_tx_rate *rate, u8 hlid) +{ + u8 fw_rate = wl->links[hlid].fw_rate_idx; + + if (fw_rate > CONF_HW_RATE_INDEX_MAX) { + wl1271_error("last Tx rate invalid: %d", fw_rate); + rate->idx = 0; + rate->flags = 0; + return; + } + + if (fw_rate <= CONF_HW_RATE_INDEX_54MBPS) { + rate->idx = fw_rate; + if (band == NL80211_BAND_5GHZ) + rate->idx -= CONF_HW_RATE_INDEX_6MBPS; + rate->flags = 0; + } else { + rate->flags = IEEE80211_TX_RC_MCS; + rate->idx = fw_rate - CONF_HW_RATE_INDEX_MCS0; + + /* SGI modifier is counted as a separate rate */ + if (fw_rate >= CONF_HW_RATE_INDEX_MCS7_SGI) + (rate->idx)--; + if (fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI) + (rate->idx)--; + + /* this also covers the 40Mhz SGI case (= MCS15) */ + if (fw_rate == CONF_HW_RATE_INDEX_MCS7_SGI || + fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI) + rate->flags |= IEEE80211_TX_RC_SHORT_GI; + + if (fw_rate > CONF_HW_RATE_INDEX_MCS7_SGI && vif) { + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || + wlvif->channel_type == NL80211_CHAN_HT40PLUS) { + /* adjustment needed for range 0-7 */ + rate->idx -= 8; + rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + } + } + } +} + +static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte) +{ + struct ieee80211_tx_info *info; + struct sk_buff *skb; + int id = tx_stat_byte & WL18XX_TX_STATUS_DESC_ID_MASK; + bool tx_success; + struct wl1271_tx_hw_descr *tx_desc; + + /* check for id legality */ + if (unlikely(id >= wl->num_tx_desc || wl->tx_frames[id] == NULL)) { + wl1271_warning("illegal id in tx completion: %d", id); + return; + } + + /* a zero bit indicates Tx success */ + tx_success = !(tx_stat_byte & BIT(WL18XX_TX_STATUS_STAT_BIT_IDX)); + + skb = wl->tx_frames[id]; + info = IEEE80211_SKB_CB(skb); + tx_desc = (struct wl1271_tx_hw_descr *)skb->data; + + if (wl12xx_is_dummy_packet(wl, skb)) { + wl1271_free_tx_id(wl, id); + return; + } + + /* update the TX status info */ + if (tx_success && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) + info->flags |= IEEE80211_TX_STAT_ACK; + /* + * first pass info->control.vif while it's valid, and then fill out + * the info->status structures + */ + wl18xx_get_last_tx_rate(wl, info->control.vif, + info->band, + &info->status.rates[0], + tx_desc->hlid); + + info->status.rates[0].count = 1; /* no data about retries */ + info->status.ack_signal = -1; + + if (!tx_success) + wl->stats.retry_count++; + + /* + * TODO: update sequence number for encryption? seems to be + * unsupported for now. needed for recovery with encryption. + */ + + /* remove private header from packet */ + skb_pull(skb, sizeof(struct wl1271_tx_hw_descr)); + + /* remove TKIP header space if present */ + if ((wl->quirks & WLCORE_QUIRK_TKIP_HEADER_SPACE) && + info->control.hw_key && + info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { + int hdrlen = ieee80211_get_hdrlen_from_skb(skb); + memmove(skb->data + WL1271_EXTRA_SPACE_TKIP, skb->data, hdrlen); + skb_pull(skb, WL1271_EXTRA_SPACE_TKIP); + } + + wl1271_debug(DEBUG_TX, "tx status id %u skb 0x%p success %d", + id, skb, tx_success); + + /* return the packet to the stack */ + skb_queue_tail(&wl->deferred_tx_queue, skb); + queue_work(wl->freezable_wq, &wl->netstack_work); + wl1271_free_tx_id(wl, id); +} + +void wl18xx_tx_immediate_complete(struct wl1271 *wl) +{ + struct wl18xx_fw_status_priv *status_priv = + (struct wl18xx_fw_status_priv *)wl->fw_status->priv; + struct wl18xx_priv *priv = wl->priv; + u8 i, hlid; + + /* nothing to do here */ + if (priv->last_fw_rls_idx == status_priv->fw_release_idx) + return; + + /* update rates per link */ + hlid = wl->fw_status->counters.hlid; + + if (hlid < WLCORE_MAX_LINKS) { + wl->links[hlid].fw_rate_idx = + wl->fw_status->counters.tx_last_rate; + wl->links[hlid].fw_rate_mbps = + wl->fw_status->counters.tx_last_rate_mbps; + } + + /* freed Tx descriptors */ + wl1271_debug(DEBUG_TX, "last released desc = %d, current idx = %d", + priv->last_fw_rls_idx, status_priv->fw_release_idx); + + if (status_priv->fw_release_idx >= WL18XX_FW_MAX_TX_STATUS_DESC) { + wl1271_error("invalid desc release index %d", + status_priv->fw_release_idx); + WARN_ON(1); + return; + } + + for (i = priv->last_fw_rls_idx; + i != status_priv->fw_release_idx; + i = (i + 1) % WL18XX_FW_MAX_TX_STATUS_DESC) { + wl18xx_tx_complete_packet(wl, + status_priv->released_tx_desc[i]); + + wl->tx_results_count++; + } + + priv->last_fw_rls_idx = status_priv->fw_release_idx; +} diff --git a/drivers/net/wireless/ti/wl18xx/tx.h b/drivers/net/wireless/ti/wl18xx/tx.h new file mode 100644 index 0000000000..1d5c6dcfbc --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/tx.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments. All rights reserved. + */ + +#ifndef __WL18XX_TX_H__ +#define __WL18XX_TX_H__ + +#include "../wlcore/wlcore.h" + +#define WL18XX_TX_HW_BLOCK_SPARE 1 +/* for special cases - namely, TKIP and GEM */ +#define WL18XX_TX_HW_EXTRA_BLOCK_SPARE 2 +#define WL18XX_TX_HW_BLOCK_SIZE 268 + +#define WL18XX_TX_STATUS_DESC_ID_MASK 0x7F +#define WL18XX_TX_STATUS_STAT_BIT_IDX 7 + +/* Indicates this TX HW frame is not padded to SDIO block size */ +#define WL18XX_TX_CTRL_NOT_PADDED BIT(7) + +/* + * The FW uses a special bit to indicate a wide channel should be used in + * the rate policy. + */ +#define CONF_TX_RATE_USE_WIDE_CHAN BIT(31) + +void wl18xx_tx_immediate_complete(struct wl1271 *wl); + +#endif /* __WL12XX_TX_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h new file mode 100644 index 0000000000..b642e0c437 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + */ + +#ifndef __WL18XX_PRIV_H__ +#define __WL18XX_PRIV_H__ + +#include "conf.h" + +/* minimum FW required for driver */ +#define WL18XX_CHIP_VER 8 +#define WL18XX_IFTYPE_VER 9 +#define WL18XX_MAJOR_VER WLCORE_FW_VER_IGNORE +#define WL18XX_SUBTYPE_VER WLCORE_FW_VER_IGNORE +#define WL18XX_MINOR_VER 58 + +#define WL18XX_CMD_MAX_SIZE 740 + +#define WL18XX_AGGR_BUFFER_SIZE (13 * PAGE_SIZE) + +#define WL18XX_NUM_TX_DESCRIPTORS 32 +#define WL18XX_NUM_RX_DESCRIPTORS 32 + +#define WL18XX_NUM_MAC_ADDRESSES 2 + +#define WL18XX_RX_BA_MAX_SESSIONS 13 + +#define WL18XX_MAX_AP_STATIONS 10 +#define WL18XX_MAX_LINKS 16 + +struct wl18xx_priv { + /* buffer for sending commands to FW */ + u8 cmd_buf[WL18XX_CMD_MAX_SIZE]; + + struct wl18xx_priv_conf conf; + + /* Index of last released Tx desc in FW */ + u8 last_fw_rls_idx; + + /* number of keys requiring extra spare mem-blocks */ + int extra_spare_key_count; +}; + +#define WL18XX_FW_MAX_TX_STATUS_DESC 33 + +struct wl18xx_fw_status_priv { + /* + * Index in released_tx_desc for first byte that holds + * released tx host desc + */ + u8 fw_release_idx; + + /* + * Array of host Tx descriptors, where fw_release_idx + * indicated the first released idx. + */ + u8 released_tx_desc[WL18XX_FW_MAX_TX_STATUS_DESC]; + + /* A bitmap representing the currently suspended links. The suspend + * is short lived, for multi-channel Tx requirements. + */ + __le32 link_suspend_bitmap; + + /* packet threshold for an "almost empty" AC, + * for Tx schedulng purposes + */ + u8 tx_ac_threshold; + + /* number of packets to queue up for a link in PS */ + u8 tx_ps_threshold; + + /* number of packet to queue up for a suspended link */ + u8 tx_suspend_threshold; + + /* Should have less than this number of packets in queue of a slow + * link to qualify as high priority link + */ + u8 tx_slow_link_prio_threshold; + + /* Should have less than this number of packets in queue of a fast + * link to qualify as high priority link + */ + u8 tx_fast_link_prio_threshold; + + /* Should have less than this number of packets in queue of a slow + * link before we stop queuing up packets for it. + */ + u8 tx_slow_stop_threshold; + + /* Should have less than this number of packets in queue of a fast + * link before we stop queuing up packets for it. + */ + u8 tx_fast_stop_threshold; + + u8 padding[3]; +}; + +struct wl18xx_fw_packet_counters { + /* Cumulative counter of released packets per AC */ + u8 tx_released_pkts[NUM_TX_QUEUES]; + + /* Cumulative counter of freed packets per HLID */ + u8 tx_lnk_free_pkts[WL18XX_MAX_LINKS]; + + /* Cumulative counter of released Voice memory blocks */ + u8 tx_voice_released_blks; + + /* Tx rate of the last transmitted packet */ + u8 tx_last_rate; + + /* Tx rate or Tx rate estimate pre-calculated by fw in mbps units */ + u8 tx_last_rate_mbps; + + /* hlid for which the rates were reported */ + u8 hlid; +} __packed; + +/* FW status registers */ +struct wl18xx_fw_status { + __le32 intr; + u8 fw_rx_counter; + u8 drv_rx_counter; + u8 reserved; + u8 tx_results_counter; + __le32 rx_pkt_descs[WL18XX_NUM_RX_DESCRIPTORS]; + + __le32 fw_localtime; + + /* + * A bitmap (where each bit represents a single HLID) + * to indicate if the station is in PS mode. + */ + __le32 link_ps_bitmap; + + /* + * A bitmap (where each bit represents a single HLID) to indicate + * if the station is in Fast mode + */ + __le32 link_fast_bitmap; + + /* Cumulative counter of total released mem blocks since FW-reset */ + __le32 total_released_blks; + + /* Size (in Memory Blocks) of TX pool */ + __le32 tx_total; + + struct wl18xx_fw_packet_counters counters; + + __le32 log_start_addr; + + /* Private status to be used by the lower drivers */ + struct wl18xx_fw_status_priv priv; +} __packed; + +#define WL18XX_PHY_VERSION_MAX_LEN 20 + +struct wl18xx_static_data_priv { + char phy_version[WL18XX_PHY_VERSION_MAX_LEN]; +}; + +struct wl18xx_clk_cfg { + u32 n; + u32 m; + u32 p; + u32 q; + bool swallow; +}; + +enum { + CLOCK_CONFIG_16_2_M = 1, + CLOCK_CONFIG_16_368_M, + CLOCK_CONFIG_16_8_M, + CLOCK_CONFIG_19_2_M, + CLOCK_CONFIG_26_M, + CLOCK_CONFIG_32_736_M, + CLOCK_CONFIG_33_6_M, + CLOCK_CONFIG_38_468_M, + CLOCK_CONFIG_52_M, + + NUM_CLOCK_CONFIGS, +}; + +#endif /* __WL18XX_PRIV_H__ */ |