summaryrefslogtreecommitdiffstats
path: root/drivers/phy/lantiq
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/lantiq')
-rw-r--r--drivers/phy/lantiq/Kconfig21
-rw-r--r--drivers/phy/lantiq/Makefile3
-rw-r--r--drivers/phy/lantiq/phy-lantiq-rcu-usb2.c255
-rw-r--r--drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c493
4 files changed, 772 insertions, 0 deletions
diff --git a/drivers/phy/lantiq/Kconfig b/drivers/phy/lantiq/Kconfig
new file mode 100644
index 0000000000..c4df9709d5
--- /dev/null
+++ b/drivers/phy/lantiq/Kconfig
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Lantiq / Intel platforms
+#
+config PHY_LANTIQ_VRX200_PCIE
+ tristate "Lantiq VRX200/ARX300 PCIe PHY"
+ depends on SOC_TYPE_XWAY || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ select REGMAP_MMIO
+ help
+ Support for the PCIe PHY(s) on the Lantiq / Intel VRX200 and ARX300
+ family SoCs.
+ If unsure, say N.
+
+config PHY_LANTIQ_RCU_USB2
+ tristate "Lantiq XWAY SoC RCU based USB PHY"
+ depends on OF && (SOC_TYPE_XWAY || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Support for the USB PHY(s) on the Lantiq / Intel XWAY family SoCs.
diff --git a/drivers/phy/lantiq/Makefile b/drivers/phy/lantiq/Makefile
new file mode 100644
index 0000000000..7c14eb24ab
--- /dev/null
+++ b/drivers/phy/lantiq/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_LANTIQ_RCU_USB2) += phy-lantiq-rcu-usb2.o
+obj-$(CONFIG_PHY_LANTIQ_VRX200_PCIE) += phy-lantiq-vrx200-pcie.o
diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
new file mode 100644
index 0000000000..82f1ffc0b0
--- /dev/null
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Lantiq XWAY SoC RCU module based USB 1.1/2.0 PHY driver
+ *
+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* Transmitter HS Pre-Emphasis Enable */
+#define RCU_CFG1_TX_PEE BIT(0)
+/* Disconnect Threshold */
+#define RCU_CFG1_DIS_THR_MASK 0x00038000
+#define RCU_CFG1_DIS_THR_SHIFT 15
+
+struct ltq_rcu_usb2_bits {
+ u8 hostmode;
+ u8 slave_endianness;
+ u8 host_endianness;
+ bool have_ana_cfg;
+};
+
+struct ltq_rcu_usb2_priv {
+ struct regmap *regmap;
+ unsigned int phy_reg_offset;
+ unsigned int ana_cfg1_reg_offset;
+ const struct ltq_rcu_usb2_bits *reg_bits;
+ struct device *dev;
+ struct phy *phy;
+ struct clk *phy_gate_clk;
+ struct reset_control *ctrl_reset;
+ struct reset_control *phy_reset;
+};
+
+static const struct ltq_rcu_usb2_bits xway_rcu_usb2_reg_bits = {
+ .hostmode = 11,
+ .slave_endianness = 9,
+ .host_endianness = 10,
+ .have_ana_cfg = false,
+};
+
+static const struct ltq_rcu_usb2_bits xrx100_rcu_usb2_reg_bits = {
+ .hostmode = 11,
+ .slave_endianness = 17,
+ .host_endianness = 10,
+ .have_ana_cfg = false,
+};
+
+static const struct ltq_rcu_usb2_bits xrx200_rcu_usb2_reg_bits = {
+ .hostmode = 11,
+ .slave_endianness = 9,
+ .host_endianness = 10,
+ .have_ana_cfg = true,
+};
+
+static const struct of_device_id ltq_rcu_usb2_phy_of_match[] = {
+ {
+ .compatible = "lantiq,ase-usb2-phy",
+ .data = &xway_rcu_usb2_reg_bits,
+ },
+ {
+ .compatible = "lantiq,danube-usb2-phy",
+ .data = &xway_rcu_usb2_reg_bits,
+ },
+ {
+ .compatible = "lantiq,xrx100-usb2-phy",
+ .data = &xrx100_rcu_usb2_reg_bits,
+ },
+ {
+ .compatible = "lantiq,xrx200-usb2-phy",
+ .data = &xrx200_rcu_usb2_reg_bits,
+ },
+ {
+ .compatible = "lantiq,xrx300-usb2-phy",
+ .data = &xrx200_rcu_usb2_reg_bits,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ltq_rcu_usb2_phy_of_match);
+
+static int ltq_rcu_usb2_phy_init(struct phy *phy)
+{
+ struct ltq_rcu_usb2_priv *priv = phy_get_drvdata(phy);
+
+ if (priv->reg_bits->have_ana_cfg) {
+ regmap_update_bits(priv->regmap, priv->ana_cfg1_reg_offset,
+ RCU_CFG1_TX_PEE, RCU_CFG1_TX_PEE);
+ regmap_update_bits(priv->regmap, priv->ana_cfg1_reg_offset,
+ RCU_CFG1_DIS_THR_MASK, 7 << RCU_CFG1_DIS_THR_SHIFT);
+ }
+
+ /* Configure core to host mode */
+ regmap_update_bits(priv->regmap, priv->phy_reg_offset,
+ BIT(priv->reg_bits->hostmode), 0);
+
+ /* Select DMA endianness (Host-endian: big-endian) */
+ regmap_update_bits(priv->regmap, priv->phy_reg_offset,
+ BIT(priv->reg_bits->slave_endianness), 0);
+ regmap_update_bits(priv->regmap, priv->phy_reg_offset,
+ BIT(priv->reg_bits->host_endianness),
+ BIT(priv->reg_bits->host_endianness));
+
+ return 0;
+}
+
+static int ltq_rcu_usb2_phy_power_on(struct phy *phy)
+{
+ struct ltq_rcu_usb2_priv *priv = phy_get_drvdata(phy);
+ struct device *dev = priv->dev;
+ int ret;
+
+ reset_control_deassert(priv->phy_reset);
+
+ ret = clk_prepare_enable(priv->phy_gate_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable PHY gate\n");
+ return ret;
+ }
+
+ /*
+ * at least the xrx200 usb2 phy requires some extra time to be
+ * operational after enabling the clock
+ */
+ usleep_range(100, 200);
+
+ return ret;
+}
+
+static int ltq_rcu_usb2_phy_power_off(struct phy *phy)
+{
+ struct ltq_rcu_usb2_priv *priv = phy_get_drvdata(phy);
+
+ reset_control_assert(priv->phy_reset);
+
+ clk_disable_unprepare(priv->phy_gate_clk);
+
+ return 0;
+}
+
+static const struct phy_ops ltq_rcu_usb2_phy_ops = {
+ .init = ltq_rcu_usb2_phy_init,
+ .power_on = ltq_rcu_usb2_phy_power_on,
+ .power_off = ltq_rcu_usb2_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int ltq_rcu_usb2_of_parse(struct ltq_rcu_usb2_priv *priv,
+ struct platform_device *pdev)
+{
+ struct device *dev = priv->dev;
+ const __be32 *offset;
+
+ priv->reg_bits = of_device_get_match_data(dev);
+
+ priv->regmap = syscon_node_to_regmap(dev->of_node->parent);
+ if (IS_ERR(priv->regmap)) {
+ dev_err(dev, "Failed to lookup RCU regmap\n");
+ return PTR_ERR(priv->regmap);
+ }
+
+ offset = of_get_address(dev->of_node, 0, NULL, NULL);
+ if (!offset) {
+ dev_err(dev, "Failed to get RCU PHY reg offset\n");
+ return -ENOENT;
+ }
+ priv->phy_reg_offset = __be32_to_cpu(*offset);
+
+ if (priv->reg_bits->have_ana_cfg) {
+ offset = of_get_address(dev->of_node, 1, NULL, NULL);
+ if (!offset) {
+ dev_err(dev, "Failed to get RCU ANA CFG1 reg offset\n");
+ return -ENOENT;
+ }
+ priv->ana_cfg1_reg_offset = __be32_to_cpu(*offset);
+ }
+
+ priv->phy_gate_clk = devm_clk_get(dev, "phy");
+ if (IS_ERR(priv->phy_gate_clk)) {
+ dev_err(dev, "Unable to get USB phy gate clk\n");
+ return PTR_ERR(priv->phy_gate_clk);
+ }
+
+ priv->ctrl_reset = devm_reset_control_get_shared(dev, "ctrl");
+ if (IS_ERR(priv->ctrl_reset)) {
+ if (PTR_ERR(priv->ctrl_reset) != -EPROBE_DEFER)
+ dev_err(dev, "failed to get 'ctrl' reset\n");
+ return PTR_ERR(priv->ctrl_reset);
+ }
+
+ priv->phy_reset = devm_reset_control_get_optional(dev, "phy");
+
+ return PTR_ERR_OR_ZERO(priv->phy_reset);
+}
+
+static int ltq_rcu_usb2_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ltq_rcu_usb2_priv *priv;
+ struct phy_provider *provider;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ ret = ltq_rcu_usb2_of_parse(priv, pdev);
+ if (ret)
+ return ret;
+
+ /* Reset USB core through reset controller */
+ reset_control_deassert(priv->ctrl_reset);
+
+ reset_control_assert(priv->phy_reset);
+
+ priv->phy = devm_phy_create(dev, dev->of_node, &ltq_rcu_usb2_phy_ops);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ phy_set_drvdata(priv->phy, priv);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider))
+ return PTR_ERR(provider);
+
+ dev_set_drvdata(priv->dev, priv);
+ return 0;
+}
+
+static struct platform_driver ltq_rcu_usb2_phy_driver = {
+ .probe = ltq_rcu_usb2_phy_probe,
+ .driver = {
+ .name = "lantiq-rcu-usb2-phy",
+ .of_match_table = ltq_rcu_usb2_phy_of_match,
+ }
+};
+module_platform_driver(ltq_rcu_usb2_phy_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Lantiq XWAY USB2 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
new file mode 100644
index 0000000000..ef93bf2cba
--- /dev/null
+++ b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PCIe PHY driver for Lantiq VRX200 and ARX300 SoCs.
+ *
+ * Copyright (C) 2019 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * Based on the BSP (called "UGW") driver:
+ * Copyright (C) 2009-2015 Lei Chuanhua <chuanhua.lei@lantiq.com>
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * TODO: PHY modes other than 36MHz (without "SSC")
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
+
+#define PCIE_PHY_PLL_CTRL1 0x44
+
+#define PCIE_PHY_PLL_CTRL2 0x46
+#define PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK GENMASK(7, 0)
+#define PCIE_PHY_PLL_CTRL2_CONST_SDM_EN BIT(8)
+#define PCIE_PHY_PLL_CTRL2_PLL_SDM_EN BIT(9)
+
+#define PCIE_PHY_PLL_CTRL3 0x48
+#define PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_EN BIT(1)
+#define PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_MASK GENMASK(6, 4)
+
+#define PCIE_PHY_PLL_CTRL4 0x4a
+#define PCIE_PHY_PLL_CTRL5 0x4c
+#define PCIE_PHY_PLL_CTRL6 0x4e
+#define PCIE_PHY_PLL_CTRL7 0x50
+#define PCIE_PHY_PLL_A_CTRL1 0x52
+
+#define PCIE_PHY_PLL_A_CTRL2 0x54
+#define PCIE_PHY_PLL_A_CTRL2_LF_MODE_EN BIT(14)
+
+#define PCIE_PHY_PLL_A_CTRL3 0x56
+#define PCIE_PHY_PLL_A_CTRL3_MMD_MASK GENMASK(15, 13)
+
+#define PCIE_PHY_PLL_STATUS 0x58
+
+#define PCIE_PHY_TX1_CTRL1 0x60
+#define PCIE_PHY_TX1_CTRL1_FORCE_EN BIT(3)
+#define PCIE_PHY_TX1_CTRL1_LOAD_EN BIT(4)
+
+#define PCIE_PHY_TX1_CTRL2 0x62
+#define PCIE_PHY_TX1_CTRL3 0x64
+#define PCIE_PHY_TX1_A_CTRL1 0x66
+#define PCIE_PHY_TX1_A_CTRL2 0x68
+#define PCIE_PHY_TX1_MOD1 0x6a
+#define PCIE_PHY_TX1_MOD2 0x6c
+#define PCIE_PHY_TX1_MOD3 0x6e
+
+#define PCIE_PHY_TX2_CTRL1 0x70
+#define PCIE_PHY_TX2_CTRL1_LOAD_EN BIT(4)
+
+#define PCIE_PHY_TX2_CTRL2 0x72
+#define PCIE_PHY_TX2_A_CTRL1 0x76
+#define PCIE_PHY_TX2_A_CTRL2 0x78
+#define PCIE_PHY_TX2_MOD1 0x7a
+#define PCIE_PHY_TX2_MOD2 0x7c
+#define PCIE_PHY_TX2_MOD3 0x7e
+
+#define PCIE_PHY_RX1_CTRL1 0xa0
+#define PCIE_PHY_RX1_CTRL1_LOAD_EN BIT(1)
+
+#define PCIE_PHY_RX1_CTRL2 0xa2
+#define PCIE_PHY_RX1_CDR 0xa4
+#define PCIE_PHY_RX1_EI 0xa6
+#define PCIE_PHY_RX1_A_CTRL 0xaa
+
+struct ltq_vrx200_pcie_phy_priv {
+ struct phy *phy;
+ unsigned int mode;
+ struct device *dev;
+ struct regmap *phy_regmap;
+ struct regmap *rcu_regmap;
+ struct clk *pdi_clk;
+ struct clk *phy_clk;
+ struct reset_control *phy_reset;
+ struct reset_control *pcie_reset;
+ u32 rcu_ahb_endian_offset;
+ u32 rcu_ahb_endian_big_endian_mask;
+};
+
+static void ltq_vrx200_pcie_phy_common_setup(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+
+ /* PLL Setting */
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL1, 0x120e);
+
+ /* increase the bias reference voltage */
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL2, 0x39d7);
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL3, 0x0900);
+
+ /* Endcnt */
+ regmap_write(priv->phy_regmap, PCIE_PHY_RX1_EI, 0x0004);
+ regmap_write(priv->phy_regmap, PCIE_PHY_RX1_A_CTRL, 0x6803);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_TX1_CTRL1,
+ PCIE_PHY_TX1_CTRL1_FORCE_EN,
+ PCIE_PHY_TX1_CTRL1_FORCE_EN);
+
+ /* predrv_ser_en */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_A_CTRL2, 0x0706);
+
+ /* ctrl_lim */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_CTRL3, 0x1fff);
+
+ /* ctrl */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_A_CTRL1, 0x0810);
+
+ /* predrv_ser_en */
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_TX2_A_CTRL2, 0x7f00,
+ 0x4700);
+
+ /* RTERM */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_CTRL2, 0x2e00);
+
+ /* Improved 100MHz clock output */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_CTRL2, 0x3096);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_A_CTRL2, 0x4707);
+
+ /* Reduced CDR BW to avoid glitches */
+ regmap_write(priv->phy_regmap, PCIE_PHY_RX1_CDR, 0x0235);
+}
+
+static void pcie_phy_36mhz_mode_setup(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL3,
+ PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_EN, 0x0000);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL3,
+ PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_MASK, 0x0000);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL2,
+ PCIE_PHY_PLL_CTRL2_PLL_SDM_EN,
+ PCIE_PHY_PLL_CTRL2_PLL_SDM_EN);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL2,
+ PCIE_PHY_PLL_CTRL2_CONST_SDM_EN,
+ PCIE_PHY_PLL_CTRL2_CONST_SDM_EN);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL3,
+ PCIE_PHY_PLL_A_CTRL3_MMD_MASK,
+ FIELD_PREP(PCIE_PHY_PLL_A_CTRL3_MMD_MASK, 0x1));
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL2,
+ PCIE_PHY_PLL_A_CTRL2_LF_MODE_EN, 0x0000);
+
+ /* const_sdm */
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL1, 0x38e4);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL2,
+ PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK,
+ FIELD_PREP(PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK,
+ 0xee));
+
+ /* pllmod */
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL7, 0x0002);
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL6, 0x3a04);
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL5, 0xfae3);
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL4, 0x1b72);
+}
+
+static int ltq_vrx200_pcie_phy_wait_for_pll(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ unsigned int tmp;
+ int ret;
+
+ ret = regmap_read_poll_timeout(priv->phy_regmap, PCIE_PHY_PLL_STATUS,
+ tmp, ((tmp & 0x0070) == 0x0070), 10,
+ 10000);
+ if (ret) {
+ dev_err(priv->dev, "PLL Link timeout, PLL status = 0x%04x\n",
+ tmp);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ltq_vrx200_pcie_phy_apply_workarounds(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ static const struct reg_default slices[] = {
+ {
+ .reg = PCIE_PHY_TX1_CTRL1,
+ .def = PCIE_PHY_TX1_CTRL1_LOAD_EN,
+ },
+ {
+ .reg = PCIE_PHY_TX2_CTRL1,
+ .def = PCIE_PHY_TX2_CTRL1_LOAD_EN,
+ },
+ {
+ .reg = PCIE_PHY_RX1_CTRL1,
+ .def = PCIE_PHY_RX1_CTRL1_LOAD_EN,
+ }
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(slices); i++) {
+ /* enable load_en */
+ regmap_update_bits(priv->phy_regmap, slices[i].reg,
+ slices[i].def, slices[i].def);
+
+ udelay(1);
+
+ /* disable load_en */
+ regmap_update_bits(priv->phy_regmap, slices[i].reg,
+ slices[i].def, 0x0);
+ }
+
+ for (i = 0; i < 5; i++) {
+ /* TX2 modulation */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD1, 0x1ffe);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD2, 0xfffe);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD3, 0x0601);
+ usleep_range(1000, 2000);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD3, 0x0001);
+
+ /* TX1 modulation */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD1, 0x1ffe);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD2, 0xfffe);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD3, 0x0601);
+ usleep_range(1000, 2000);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD3, 0x0001);
+ }
+}
+
+static int ltq_vrx200_pcie_phy_init(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ if (of_device_is_big_endian(priv->dev->of_node))
+ regmap_update_bits(priv->rcu_regmap,
+ priv->rcu_ahb_endian_offset,
+ priv->rcu_ahb_endian_big_endian_mask,
+ priv->rcu_ahb_endian_big_endian_mask);
+ else
+ regmap_update_bits(priv->rcu_regmap,
+ priv->rcu_ahb_endian_offset,
+ priv->rcu_ahb_endian_big_endian_mask, 0x0);
+
+ ret = reset_control_assert(priv->phy_reset);
+ if (ret)
+ goto err;
+
+ udelay(1);
+
+ ret = reset_control_deassert(priv->phy_reset);
+ if (ret)
+ goto err;
+
+ udelay(1);
+
+ ret = reset_control_deassert(priv->pcie_reset);
+ if (ret)
+ goto err_assert_phy_reset;
+
+ /* Make sure PHY PLL is stable */
+ usleep_range(20, 40);
+
+ return 0;
+
+err_assert_phy_reset:
+ reset_control_assert(priv->phy_reset);
+err:
+ return ret;
+}
+
+static int ltq_vrx200_pcie_phy_exit(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = reset_control_assert(priv->pcie_reset);
+ if (ret)
+ return ret;
+
+ ret = reset_control_assert(priv->phy_reset);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ltq_vrx200_pcie_phy_power_on(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ /* Enable PDI to access PCIe PHY register */
+ ret = clk_prepare_enable(priv->pdi_clk);
+ if (ret)
+ goto err;
+
+ /* Configure PLL and PHY clock */
+ ltq_vrx200_pcie_phy_common_setup(phy);
+
+ pcie_phy_36mhz_mode_setup(phy);
+
+ /* Enable the PCIe PHY and make PLL setting take effect */
+ ret = clk_prepare_enable(priv->phy_clk);
+ if (ret)
+ goto err_disable_pdi_clk;
+
+ /* Check if we are in "startup ready" status */
+ ret = ltq_vrx200_pcie_phy_wait_for_pll(phy);
+ if (ret)
+ goto err_disable_phy_clk;
+
+ ltq_vrx200_pcie_phy_apply_workarounds(phy);
+
+ return 0;
+
+err_disable_phy_clk:
+ clk_disable_unprepare(priv->phy_clk);
+err_disable_pdi_clk:
+ clk_disable_unprepare(priv->pdi_clk);
+err:
+ return ret;
+}
+
+static int ltq_vrx200_pcie_phy_power_off(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(priv->phy_clk);
+ clk_disable_unprepare(priv->pdi_clk);
+
+ return 0;
+}
+
+static const struct phy_ops ltq_vrx200_pcie_phy_ops = {
+ .init = ltq_vrx200_pcie_phy_init,
+ .exit = ltq_vrx200_pcie_phy_exit,
+ .power_on = ltq_vrx200_pcie_phy_power_on,
+ .power_off = ltq_vrx200_pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *ltq_vrx200_pcie_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = dev_get_drvdata(dev);
+ unsigned int mode;
+
+ if (args->args_count != 1) {
+ dev_err(dev, "invalid number of arguments\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ mode = args->args[0];
+
+ switch (mode) {
+ case LANTIQ_PCIE_PHY_MODE_36MHZ:
+ priv->mode = mode;
+ break;
+
+ case LANTIQ_PCIE_PHY_MODE_25MHZ:
+ case LANTIQ_PCIE_PHY_MODE_25MHZ_SSC:
+ case LANTIQ_PCIE_PHY_MODE_36MHZ_SSC:
+ case LANTIQ_PCIE_PHY_MODE_100MHZ:
+ case LANTIQ_PCIE_PHY_MODE_100MHZ_SSC:
+ dev_err(dev, "PHY mode not implemented yet: %u\n", mode);
+ return ERR_PTR(-EINVAL);
+
+ default:
+ dev_err(dev, "invalid PHY mode %u\n", mode);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return priv->phy;
+}
+
+static int ltq_vrx200_pcie_phy_probe(struct platform_device *pdev)
+{
+ static const struct regmap_config regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .reg_stride = 2,
+ .max_register = PCIE_PHY_RX1_A_CTRL,
+ };
+ struct ltq_vrx200_pcie_phy_priv *priv;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *provider;
+ void __iomem *base;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv->phy_regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
+ if (IS_ERR(priv->phy_regmap))
+ return PTR_ERR(priv->phy_regmap);
+
+ priv->rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "lantiq,rcu");
+ if (IS_ERR(priv->rcu_regmap))
+ return PTR_ERR(priv->rcu_regmap);
+
+ ret = device_property_read_u32(dev, "lantiq,rcu-endian-offset",
+ &priv->rcu_ahb_endian_offset);
+ if (ret) {
+ dev_err(dev,
+ "failed to parse the 'lantiq,rcu-endian-offset' property\n");
+ return ret;
+ }
+
+ ret = device_property_read_u32(dev, "lantiq,rcu-big-endian-mask",
+ &priv->rcu_ahb_endian_big_endian_mask);
+ if (ret) {
+ dev_err(dev,
+ "failed to parse the 'lantiq,rcu-big-endian-mask' property\n");
+ return ret;
+ }
+
+ priv->pdi_clk = devm_clk_get(dev, "pdi");
+ if (IS_ERR(priv->pdi_clk))
+ return PTR_ERR(priv->pdi_clk);
+
+ priv->phy_clk = devm_clk_get(dev, "phy");
+ if (IS_ERR(priv->phy_clk))
+ return PTR_ERR(priv->phy_clk);
+
+ priv->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
+ if (IS_ERR(priv->phy_reset))
+ return PTR_ERR(priv->phy_reset);
+
+ priv->pcie_reset = devm_reset_control_get_shared(dev, "pcie");
+ if (IS_ERR(priv->pcie_reset))
+ return PTR_ERR(priv->pcie_reset);
+
+ priv->dev = dev;
+
+ priv->phy = devm_phy_create(dev, dev->of_node,
+ &ltq_vrx200_pcie_phy_ops);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ phy_set_drvdata(priv->phy, priv);
+ dev_set_drvdata(dev, priv);
+
+ provider = devm_of_phy_provider_register(dev,
+ ltq_vrx200_pcie_phy_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id ltq_vrx200_pcie_phy_of_match[] = {
+ { .compatible = "lantiq,vrx200-pcie-phy", },
+ { .compatible = "lantiq,arx300-pcie-phy", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ltq_vrx200_pcie_phy_of_match);
+
+static struct platform_driver ltq_vrx200_pcie_phy_driver = {
+ .probe = ltq_vrx200_pcie_phy_probe,
+ .driver = {
+ .name = "ltq-vrx200-pcie-phy",
+ .of_match_table = ltq_vrx200_pcie_phy_of_match,
+ }
+};
+module_platform_driver(ltq_vrx200_pcie_phy_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Lantiq VRX200 and ARX300 PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 06:48:57 +0000