summaryrefslogtreecommitdiffstats
path: root/drivers/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/cadence/phy-cadence-torrent.c3
-rw-r--r--drivers/phy/freescale/Kconfig6
-rw-r--r--drivers/phy/freescale/Makefile1
-rw-r--r--drivers/phy/freescale/phy-fsl-samsung-hdmi.c718
-rw-r--r--drivers/phy/mediatek/Kconfig11
-rw-r--r--drivers/phy/mediatek/Makefile1
-rw-r--r--drivers/phy/mediatek/phy-mtk-xfi-tphy.c451
-rw-r--r--drivers/phy/phy-core.c26
-rw-r--r--drivers/phy/qualcomm/phy-qcom-edp.c373
-rw-r--r--drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c17
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp-combo.c2
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp-pcie.c106
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h4
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h6
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp-ufs.c144
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp-usb.c47
-rw-r--r--drivers/phy/rockchip/Kconfig14
-rw-r--r--drivers/phy/rockchip/Makefile1
-rw-r--r--drivers/phy/rockchip/phy-rockchip-naneng-combphy.c4
-rw-r--r--drivers/phy/rockchip/phy-rockchip-snps-pcie3.c49
-rw-r--r--drivers/phy/rockchip/phy-rockchip-usbdp.c1608
-rw-r--r--drivers/phy/samsung/Makefile1
-rw-r--r--drivers/phy/samsung/phy-exynos7-ufs.c1
-rw-r--r--drivers/phy/samsung/phy-exynosautov9-ufs.c1
-rw-r--r--drivers/phy/samsung/phy-fsd-ufs.c1
-rw-r--r--drivers/phy/samsung/phy-gs101-ufs.c182
-rw-r--r--drivers/phy/samsung/phy-samsung-ufs.c28
-rw-r--r--drivers/phy/samsung/phy-samsung-ufs.h6
-rw-r--r--drivers/phy/xilinx/phy-zynqmp.c20
29 files changed, 3721 insertions, 111 deletions
diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index 95924a0996..6113f0022e 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -1156,6 +1156,9 @@ static int cdns_torrent_dp_set_power_state(struct cdns_torrent_phy *cdns_phy,
ret = regmap_read_poll_timeout(regmap, PHY_PMA_XCVR_POWER_STATE_ACK,
read_val, (read_val & mask) == value, 0,
POLL_TIMEOUT_US);
+ if (ret)
+ return ret;
+
cdns_torrent_dp_write(regmap, PHY_PMA_XCVR_POWER_STATE_REQ, 0x00000000);
ndelay(100);
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 853958fb2c..45aaaea14f 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
Enable this to add support for the PCIE PHY as found on
i.MX8M family of SOCs.
+config PHY_FSL_SAMSUNG_HDMI_PHY
+ tristate "Samsung HDMI PHY support"
+ depends on OF && HAS_IOMEM && COMMON_CLK
+ help
+ Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
+
endif
config PHY_FSL_LYNX_28G
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
index cedb328bc4..c4386bfdb8 100644
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o
obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
+obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o
diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
new file mode 100644
index 0000000000..9048cdc760
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -0,0 +1,718 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ * Copyright 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define PHY_REG_00 0x00
+#define PHY_REG_01 0x04
+#define PHY_REG_02 0x08
+#define PHY_REG_08 0x20
+#define PHY_REG_09 0x24
+#define PHY_REG_10 0x28
+#define PHY_REG_11 0x2c
+
+#define PHY_REG_12 0x30
+#define REG12_CK_DIV_MASK GENMASK(5, 4)
+
+#define PHY_REG_13 0x34
+#define REG13_TG_CODE_LOW_MASK GENMASK(7, 0)
+
+#define PHY_REG_14 0x38
+#define REG14_TOL_MASK GENMASK(7, 4)
+#define REG14_RP_CODE_MASK GENMASK(3, 1)
+#define REG14_TG_CODE_HIGH_MASK GENMASK(0, 0)
+
+#define PHY_REG_15 0x3c
+#define PHY_REG_16 0x40
+#define PHY_REG_17 0x44
+#define PHY_REG_18 0x48
+#define PHY_REG_19 0x4c
+#define PHY_REG_20 0x50
+
+#define PHY_REG_21 0x54
+#define REG21_SEL_TX_CK_INV BIT(7)
+#define REG21_PMS_S_MASK GENMASK(3, 0)
+
+#define PHY_REG_22 0x58
+#define PHY_REG_23 0x5c
+#define PHY_REG_24 0x60
+#define PHY_REG_25 0x64
+#define PHY_REG_26 0x68
+#define PHY_REG_27 0x6c
+#define PHY_REG_28 0x70
+#define PHY_REG_29 0x74
+#define PHY_REG_30 0x78
+#define PHY_REG_31 0x7c
+#define PHY_REG_32 0x80
+
+/*
+ * REG33 does not match the ref manual. According to Sandor Yu from NXP,
+ * "There is a doc issue on the i.MX8MP latest RM"
+ * REG33 is being used per guidance from Sandor
+ */
+
+#define PHY_REG_33 0x84
+#define REG33_MODE_SET_DONE BIT(7)
+#define REG33_FIX_DA BIT(1)
+
+#define PHY_REG_34 0x88
+#define REG34_PHY_READY BIT(7)
+#define REG34_PLL_LOCK BIT(6)
+#define REG34_PHY_CLK_READY BIT(5)
+
+#define PHY_REG_35 0x8c
+#define PHY_REG_36 0x90
+#define PHY_REG_37 0x94
+#define PHY_REG_38 0x98
+#define PHY_REG_39 0x9c
+#define PHY_REG_40 0xa0
+#define PHY_REG_41 0xa4
+#define PHY_REG_42 0xa8
+#define PHY_REG_43 0xac
+#define PHY_REG_44 0xb0
+#define PHY_REG_45 0xb4
+#define PHY_REG_46 0xb8
+#define PHY_REG_47 0xbc
+
+#define PHY_PLL_DIV_REGS_NUM 6
+
+struct phy_config {
+ u32 pixclk;
+ u8 pll_div_regs[PHY_PLL_DIV_REGS_NUM];
+};
+
+static const struct phy_config phy_pll_cfg[] = {
+ {
+ .pixclk = 22250000,
+ .pll_div_regs = { 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 23750000,
+ .pll_div_regs = { 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40 },
+ }, {
+ .pixclk = 24000000,
+ .pll_div_regs = { 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 24024000,
+ .pll_div_regs = { 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
+ }, {
+ .pixclk = 25175000,
+ .pll_div_regs = { 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
+ }, {
+ .pixclk = 25200000,
+ .pll_div_regs = { 0x54, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 26750000,
+ .pll_div_regs = { 0x5a, 0xf2, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 27000000,
+ .pll_div_regs = { 0x5a, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 27027000,
+ .pll_div_regs = { 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 29500000,
+ .pll_div_regs = { 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 30750000,
+ .pll_div_regs = { 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 30888000,
+ .pll_div_regs = { 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
+ }, {
+ .pixclk = 33750000,
+ .pll_div_regs = { 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 35000000,
+ .pll_div_regs = { 0x58, 0xb8, 0x8b, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 36000000,
+ .pll_div_regs = { 0x5a, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 36036000,
+ .pll_div_regs = { 0x5a, 0xb2, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 40000000,
+ .pll_div_regs = { 0x64, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 43200000,
+ .pll_div_regs = { 0x5a, 0x90, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 43243200,
+ .pll_div_regs = { 0x5a, 0x92, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 44500000,
+ .pll_div_regs = { 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
+ }, {
+ .pixclk = 47000000,
+ .pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
+ }, {
+ .pixclk = 47500000,
+ .pll_div_regs = { 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
+ }, {
+ .pixclk = 50349650,
+ .pll_div_regs = { 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
+ }, {
+ .pixclk = 50400000,
+ .pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 53250000,
+ .pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
+ }, {
+ .pixclk = 53500000,
+ .pll_div_regs = { 0x5a, 0x72, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 54000000,
+ .pll_div_regs = { 0x5a, 0x70, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 54054000,
+ .pll_div_regs = { 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 59000000,
+ .pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 59340659,
+ .pll_div_regs = { 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
+ }, {
+ .pixclk = 59400000,
+ .pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 61500000,
+ .pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 63500000,
+ .pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 67500000,
+ .pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
+ }, {
+ .pixclk = 70000000,
+ .pll_div_regs = { 0x58, 0x58, 0x8b, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 72000000,
+ .pll_div_regs = { 0x5a, 0x50, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 72072000,
+ .pll_div_regs = { 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 74176000,
+ .pll_div_regs = { 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
+ }, {
+ .pixclk = 74250000,
+ .pll_div_regs = { 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
+ }, {
+ .pixclk = 78500000,
+ .pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 80000000,
+ .pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 82000000,
+ .pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 82500000,
+ .pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
+ }, {
+ .pixclk = 89000000,
+ .pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
+ }, {
+ .pixclk = 90000000,
+ .pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 94000000,
+ .pll_div_regs = { 0x4e, 0x32, 0xa7, 0x10, 0x80, 0x40 },
+ }, {
+ .pixclk = 95000000,
+ .pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
+ }, {
+ .pixclk = 98901099,
+ .pll_div_regs = { 0x52, 0x3a, 0xdb, 0x4c, 0x88, 0x47 },
+ }, {
+ .pixclk = 99000000,
+ .pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
+ }, {
+ .pixclk = 100699300,
+ .pll_div_regs = { 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
+ }, {
+ .pixclk = 100800000,
+ .pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 102500000,
+ .pll_div_regs = { 0x55, 0x32, 0x8c, 0x05, 0x90, 0x4b },
+ }, {
+ .pixclk = 104750000,
+ .pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
+ }, {
+ .pixclk = 106500000,
+ .pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
+ }, {
+ .pixclk = 107000000,
+ .pll_div_regs = { 0x5a, 0x32, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 108000000,
+ .pll_div_regs = { 0x5a, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 108108000,
+ .pll_div_regs = { 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 118000000,
+ .pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 118800000,
+ .pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 123000000,
+ .pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 127000000,
+ .pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 135000000,
+ .pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 135580000,
+ .pll_div_regs = { 0x71, 0x39, 0xe9, 0x82, 0x9c, 0x5b },
+ }, {
+ .pixclk = 137520000,
+ .pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
+ }, {
+ .pixclk = 138750000,
+ .pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
+ }, {
+ .pixclk = 140000000,
+ .pll_div_regs = { 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
+ }, {
+ .pixclk = 144000000,
+ .pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 148352000,
+ .pll_div_regs = { 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
+ }, {
+ .pixclk = 148500000,
+ .pll_div_regs = { 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
+ }, {
+ .pixclk = 154000000,
+ .pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
+ }, {
+ .pixclk = 157000000,
+ .pll_div_regs = { 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
+ }, {
+ .pixclk = 160000000,
+ .pll_div_regs = { 0x42, 0x12, 0xa1, 0x20, 0x80, 0x40 },
+ }, {
+ .pixclk = 162000000,
+ .pll_div_regs = { 0x43, 0x18, 0x8b, 0x08, 0x96, 0x55 },
+ }, {
+ .pixclk = 164000000,
+ .pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4b },
+ }, {
+ .pixclk = 165000000,
+ .pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4b },
+ }, {
+ .pixclk = 180000000,
+ .pll_div_regs = { 0x4b, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 185625000,
+ .pll_div_regs = { 0x4e, 0x12, 0x9a, 0x95, 0x80, 0x40 },
+ }, {
+ .pixclk = 188000000,
+ .pll_div_regs = { 0x4e, 0x12, 0xa7, 0x10, 0x80, 0x40 },
+ }, {
+ .pixclk = 198000000,
+ .pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
+ }, {
+ .pixclk = 205000000,
+ .pll_div_regs = { 0x55, 0x12, 0x8c, 0x05, 0x90, 0x4b },
+ }, {
+ .pixclk = 209500000,
+ .pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
+ }, {
+ .pixclk = 213000000,
+ .pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
+ }, {
+ .pixclk = 216000000,
+ .pll_div_regs = { 0x5a, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 216216000,
+ .pll_div_regs = { 0x5a, 0x12, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 237600000,
+ .pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 254000000,
+ .pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 277500000,
+ .pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
+ }, {
+ .pixclk = 288000000,
+ .pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 297000000,
+ .pll_div_regs = { 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
+ },
+};
+
+struct reg_settings {
+ u8 reg;
+ u8 val;
+};
+
+static const struct reg_settings common_phy_cfg[] = {
+ { PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
+ { PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
+ { PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
+ /* REG12 pixclk specific */
+ /* REG13 pixclk specific */
+ /* REG14 pixclk specific */
+ { PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
+ { PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
+ { PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
+ /* REG21 pixclk specific */
+ { PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
+ { PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
+ { PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
+ { PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
+ { PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
+ { PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
+ { PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
+ { PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
+ { PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
+ { PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
+ { PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
+ { PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
+ { PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
+};
+
+struct fsl_samsung_hdmi_phy {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *apbclk;
+ struct clk *refclk;
+
+ /* clk provider */
+ struct clk_hw hw;
+ const struct phy_config *cur_cfg;
+};
+
+static inline struct fsl_samsung_hdmi_phy *
+to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
+{
+ return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
+ const struct phy_config *cfg)
+{
+ u8 div = 0x1;
+
+ switch (cfg->pixclk) {
+ case 22250000 ... 33750000:
+ div = 0xf;
+ break;
+ case 35000000 ... 40000000:
+ div = 0xb;
+ break;
+ case 43200000 ... 47500000:
+ div = 0x9;
+ break;
+ case 50349650 ... 63500000:
+ div = 0x7;
+ break;
+ case 67500000 ... 90000000:
+ div = 0x5;
+ break;
+ case 94000000 ... 148500000:
+ div = 0x3;
+ break;
+ case 154000000 ... 297000000:
+ div = 0x1;
+ break;
+ }
+
+ writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
+ phy->regs + PHY_REG_21);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
+ const struct phy_config *cfg)
+{
+ u32 pclk = cfg->pixclk;
+ u32 fld_tg_code;
+ u32 pclk_khz;
+ u8 div = 1;
+
+ switch (cfg->pixclk) {
+ case 22250000 ... 47500000:
+ div = 1;
+ break;
+ case 50349650 ... 99000000:
+ div = 2;
+ break;
+ case 100699300 ... 198000000:
+ div = 4;
+ break;
+ case 205000000 ... 297000000:
+ div = 8;
+ break;
+ }
+
+ writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs + PHY_REG_12);
+
+ /*
+ * Calculation for the frequency lock detector target code (fld_tg_code)
+ * is based on reference manual register description of PHY_REG13
+ * (13.10.3.1.14.2):
+ * 1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
+ * 2nd) Increase resolution to avoid rounding issues
+ * 3th) Do the div (256 / Freq. of int_pllclk) * 24
+ * 4th) Reduce the resolution and always round up since the NXP
+ * settings rounding up always too. TODO: Check if that is
+ * correct.
+ */
+ pclk /= div;
+ pclk_khz = pclk / 1000;
+ fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
+ fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
+
+ /* FLD_TOL and FLD_RP_CODE taken from downstream driver */
+ writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
+ phy->regs + PHY_REG_13);
+ writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
+ FIELD_PREP(REG14_RP_CODE_MASK, 2) |
+ FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
+ phy->regs + PHY_REG_14);
+}
+
+static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
+ const struct phy_config *cfg)
+{
+ int i, ret;
+ u8 val;
+
+ /* HDMI PHY init */
+ writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
+
+ /* common PHY registers */
+ for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
+ writeb(common_phy_cfg[i].val, phy->regs + common_phy_cfg[i].reg);
+
+ /* set individual PLL registers PHY_REG2 ... PHY_REG7 */
+ for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
+ writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i * 4);
+
+ fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
+ fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
+
+ writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
+
+ ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
+ val & REG34_PLL_LOCK, 50, 20000);
+ if (ret)
+ dev_err(phy->dev, "PLL failed to lock\n");
+
+ return ret;
+}
+
+static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+
+ if (!phy->cur_cfg)
+ return 74250000;
+
+ return phy->cur_cfg->pixclk;
+}
+
+static long phy_clk_round_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long *parent_rate)
+{
+ int i;
+
+ for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+ if (phy_pll_cfg[i].pixclk <= rate)
+ return phy_pll_cfg[i].pixclk;
+
+ return -EINVAL;
+}
+
+static int phy_clk_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+ int i;
+
+ for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+ if (phy_pll_cfg[i].pixclk <= rate)
+ break;
+
+ if (i < 0)
+ return -EINVAL;
+
+ phy->cur_cfg = &phy_pll_cfg[i];
+
+ return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+}
+
+static const struct clk_ops phy_clk_ops = {
+ .recalc_rate = phy_clk_recalc_rate,
+ .round_rate = phy_clk_round_rate,
+ .set_rate = phy_clk_set_rate,
+};
+
+static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
+{
+ struct device *dev = phy->dev;
+ struct device_node *np = dev->of_node;
+ struct clk_init_data init;
+ const char *parent_name;
+ struct clk *phyclk;
+ int ret;
+
+ parent_name = __clk_get_name(phy->refclk);
+
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = 0;
+ init.name = "hdmi_pclk";
+ init.ops = &phy_clk_ops;
+
+ phy->hw.init = &init;
+
+ phyclk = devm_clk_register(dev, &phy->hw);
+ if (IS_ERR(phyclk))
+ return dev_err_probe(dev, PTR_ERR(phyclk),
+ "failed to register clock\n");
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, phyclk);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to register clock provider\n");
+
+ return 0;
+}
+
+static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
+{
+ struct fsl_samsung_hdmi_phy *phy;
+ int ret;
+
+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, phy);
+ phy->dev = &pdev->dev;
+
+ phy->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->regs))
+ return PTR_ERR(phy->regs);
+
+ phy->apbclk = devm_clk_get(phy->dev, "apb");
+ if (IS_ERR(phy->apbclk))
+ return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
+ "failed to get apb clk\n");
+
+ phy->refclk = devm_clk_get(phy->dev, "ref");
+ if (IS_ERR(phy->refclk))
+ return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
+ "failed to get ref clk\n");
+
+ ret = clk_prepare_enable(phy->apbclk);
+ if (ret) {
+ dev_err(phy->dev, "failed to enable apbclk\n");
+ return ret;
+ }
+
+ pm_runtime_get_noresume(phy->dev);
+ pm_runtime_set_active(phy->dev);
+ pm_runtime_enable(phy->dev);
+
+ ret = phy_clk_register(phy);
+ if (ret) {
+ dev_err(&pdev->dev, "register clk failed\n");
+ goto register_clk_failed;
+ }
+
+ pm_runtime_put(phy->dev);
+
+ return 0;
+
+register_clk_failed:
+ clk_disable_unprepare(phy->apbclk);
+
+ return ret;
+}
+
+static void fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_suspend(struct device *dev)
+{
+ struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(phy->apbclk);
+
+ return 0;
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_resume(struct device *dev)
+{
+ struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = clk_prepare_enable(phy->apbclk);
+ if (ret) {
+ dev_err(phy->dev, "failed to enable apbclk\n");
+ return ret;
+ }
+
+ if (phy->cur_cfg)
+ ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+
+ return ret;
+
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
+ fsl_samsung_hdmi_phy_suspend,
+ fsl_samsung_hdmi_phy_resume, NULL);
+
+static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
+ {
+ .compatible = "fsl,imx8mp-hdmi-phy",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
+
+static struct platform_driver fsl_samsung_hdmi_phy_driver = {
+ .probe = fsl_samsung_hdmi_phy_probe,
+ .remove_new = fsl_samsung_hdmi_phy_remove,
+ .driver = {
+ .name = "fsl-samsung-hdmi-phy",
+ .of_match_table = fsl_samsung_hdmi_phy_of_match,
+ .pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
+ },
+};
+module_platform_driver(fsl_samsung_hdmi_phy_driver);
+
+MODULE_AUTHOR("Sandor Yu <Sandor.yu@nxp.com>");
+MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 3849b7c87d..60e00057e8 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -13,6 +13,17 @@ config PHY_MTK_PCIE
callback for PCIe GEN3 port, it supports software efuse
initialization.
+config PHY_MTK_XFI_TPHY
+ tristate "MediaTek 10GE SerDes XFI T-PHY driver"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
+ select GENERIC_PHY
+ help
+ Say 'Y' here to add support for MediaTek XFI T-PHY driver.
+ The driver provides access to the Ethernet SerDes T-PHY supporting
+ 1GE and 2.5GE modes via the LynxI PCS, and 5GE and 10GE modes
+ via the USXGMII PCS found in MediaTek SoCs with 10G Ethernet.
+
config PHY_MTK_TPHY
tristate "MediaTek T-PHY Driver"
depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
index f6e24a47e0..1b8088df71 100644
--- a/drivers/phy/mediatek/Makefile
+++ b/drivers/phy/mediatek/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_MTK_PCIE) += phy-mtk-pcie.o
obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o
obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o
+obj-$(CONFIG_PHY_MTK_XFI_TPHY) += phy-mtk-xfi-tphy.o
phy-mtk-hdmi-drv-y := phy-mtk-hdmi.o
phy-mtk-hdmi-drv-y += phy-mtk-hdmi-mt2701.o
diff --git a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
new file mode 100644
index 0000000000..1a0b7484f5
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MediaTek 10GE SerDes XFI T-PHY driver
+ *
+ * Copyright (c) 2024 Daniel Golle <daniel@makrotopia.org>
+ * Bc-bocun Chen <bc-bocun.chen@mediatek.com>
+ * based on mtk_usxgmii.c and mtk_sgmii.c found in MediaTek's SDK (GPL-2.0)
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Henry Yen <henry.yen@mediatek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+
+#include "phy-mtk-io.h"
+
+#define MTK_XFI_TPHY_NUM_CLOCKS 2
+
+#define REG_DIG_GLB_70 0x0070
+#define XTP_PCS_RX_EQ_IN_PROGRESS(x) FIELD_PREP(GENMASK(25, 24), (x))
+#define XTP_PCS_MODE_MASK GENMASK(17, 16)
+#define XTP_PCS_MODE(x) FIELD_PREP(GENMASK(17, 16), (x))
+#define XTP_PCS_RST_B BIT(15)
+#define XTP_FRC_PCS_RST_B BIT(14)
+#define XTP_PCS_PWD_SYNC_MASK GENMASK(13, 12)
+#define XTP_PCS_PWD_SYNC(x) FIELD_PREP(XTP_PCS_PWD_SYNC_MASK, (x))
+#define XTP_PCS_PWD_ASYNC_MASK GENMASK(11, 10)
+#define XTP_PCS_PWD_ASYNC(x) FIELD_PREP(XTP_PCS_PWD_ASYNC_MASK, (x))
+#define XTP_FRC_PCS_PWD_ASYNC BIT(8)
+#define XTP_PCS_UPDT BIT(4)
+#define XTP_PCS_IN_FR_RG BIT(0)
+
+#define REG_DIG_GLB_F4 0x00f4
+#define XFI_DPHY_PCS_SEL BIT(0)
+#define XFI_DPHY_PCS_SEL_SGMII FIELD_PREP(XFI_DPHY_PCS_SEL, 1)
+#define XFI_DPHY_PCS_SEL_USXGMII FIELD_PREP(XFI_DPHY_PCS_SEL, 0)
+#define XFI_DPHY_AD_SGDT_FRC_EN BIT(5)
+
+#define REG_DIG_LN_TRX_40 0x3040
+#define XTP_LN_FRC_TX_DATA_EN BIT(29)
+#define XTP_LN_TX_DATA_EN BIT(28)
+
+#define REG_DIG_LN_TRX_B0 0x30b0
+#define XTP_LN_FRC_TX_MACCK_EN BIT(5)
+#define XTP_LN_TX_MACCK_EN BIT(4)
+
+#define REG_ANA_GLB_D0 0x90d0
+#define XTP_GLB_USXGMII_SEL_MASK GENMASK(3, 1)
+#define XTP_GLB_USXGMII_SEL(x) FIELD_PREP(GENMASK(3, 1), (x))
+#define XTP_GLB_USXGMII_EN BIT(0)
+
+/**
+ * struct mtk_xfi_tphy - run-time data of the XFI phy instance
+ * @base: IO memory area to access phy registers.
+ * @dev: Kernel device used to output prefixed debug info.
+ * @reset: Reset control corresponding to the phy instance.
+ * @clocks: All clocks required for the phy to operate.
+ * @da_war: Enables work-around for 10GBase-R mode.
+ */
+struct mtk_xfi_tphy {
+ void __iomem *base;
+ struct device *dev;
+ struct reset_control *reset;
+ struct clk_bulk_data clocks[MTK_XFI_TPHY_NUM_CLOCKS];
+ bool da_war;
+};
+
+/**
+ * mtk_xfi_tphy_setup() - Setup phy for specified interface mode.
+ * @xfi_tphy: XFI phy instance.
+ * @interface: Ethernet interface mode
+ *
+ * The setup function is the condensed result of combining the 5 functions which
+ * setup the phy in MediaTek's GPL licensed public SDK sources. They can be found
+ * in mtk_sgmii.c[1] as well as mtk_usxgmii.c[2].
+ *
+ * Many magic values have been replaced by register and bit definitions, however,
+ * that has not been possible in all cases. While the vendor driver uses a
+ * sequence of 32-bit writes, here we try to only modify the actually required
+ * bits.
+ *
+ * [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b72d6cba92bf9e29fb035c03052fa1e86664a25b/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_sgmii.c
+ *
+ * [2]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/dec96a1d9b82cdcda4a56453fd0b453d4cab4b85/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+ */
+static void mtk_xfi_tphy_setup(struct mtk_xfi_tphy *xfi_tphy,
+ phy_interface_t interface)
+{
+ bool is_1g, is_2p5g, is_5g, is_10g, da_war, use_lynxi_pcs;
+
+ /* shorthands for specific clock speeds depending on interface mode */
+ is_1g = interface == PHY_INTERFACE_MODE_1000BASEX ||
+ interface == PHY_INTERFACE_MODE_SGMII;
+ is_2p5g = interface == PHY_INTERFACE_MODE_2500BASEX;
+ is_5g = interface == PHY_INTERFACE_MODE_5GBASER;
+ is_10g = interface == PHY_INTERFACE_MODE_10GBASER ||
+ interface == PHY_INTERFACE_MODE_USXGMII;
+
+ /* Is overriding 10GBase-R tuning value required? */
+ da_war = xfi_tphy->da_war && (interface == PHY_INTERFACE_MODE_10GBASER);
+
+ /* configure input mux to either
+ * - USXGMII PCS (64b/66b coding) for 5G/10G
+ * - LynxI PCS (8b/10b coding) for 1G/2.5G
+ */
+ use_lynxi_pcs = is_1g || is_2p5g;
+
+ dev_dbg(xfi_tphy->dev, "setting up for mode %s\n", phy_modes(interface));
+
+ /* Setup PLL setting */
+ mtk_phy_update_bits(xfi_tphy->base + 0x9024, 0x100000, is_10g ? 0x0 : 0x100000);
+ mtk_phy_update_bits(xfi_tphy->base + 0x2020, 0x202000, is_5g ? 0x202000 : 0x0);
+ mtk_phy_update_bits(xfi_tphy->base + 0x2030, 0x500, is_1g ? 0x0 : 0x500);
+ mtk_phy_update_bits(xfi_tphy->base + 0x2034, 0xa00, is_1g ? 0x0 : 0xa00);
+ mtk_phy_update_bits(xfi_tphy->base + 0x2040, 0x340000, is_1g ? 0x200000 : 0x140000);
+
+ /* Setup RXFE BW setting */
+ mtk_phy_update_bits(xfi_tphy->base + 0x50f0, 0xc10, is_1g ? 0x410 : is_5g ? 0x800 : 0x400);
+ mtk_phy_update_bits(xfi_tphy->base + 0x50e0, 0x4000, is_5g ? 0x0 : 0x4000);
+
+ /* Setup RX CDR setting */
+ mtk_phy_update_bits(xfi_tphy->base + 0x506c, 0x30000, is_5g ? 0x0 : 0x30000);
+ mtk_phy_update_bits(xfi_tphy->base + 0x5070, 0x670000, is_5g ? 0x620000 : 0x50000);
+ mtk_phy_update_bits(xfi_tphy->base + 0x5074, 0x180000, is_5g ? 0x180000 : 0x0);
+ mtk_phy_update_bits(xfi_tphy->base + 0x5078, 0xf000400, is_5g ? 0x8000000 :
+ 0x7000400);
+ mtk_phy_update_bits(xfi_tphy->base + 0x507c, 0x5000500, is_5g ? 0x4000400 :
+ 0x1000100);
+ mtk_phy_update_bits(xfi_tphy->base + 0x5080, 0x1410, is_1g ? 0x400 : is_5g ? 0x1010 : 0x0);
+ mtk_phy_update_bits(xfi_tphy->base + 0x5084, 0x30300, is_1g ? 0x30300 :
+ is_5g ? 0x30100 :
+ 0x100);
+ mtk_phy_update_bits(xfi_tphy->base + 0x5088, 0x60200, is_1g ? 0x20200 :
+ is_5g ? 0x40000 :
+ 0x20000);
+
+ /* Setting RXFE adaptation range setting */
+ mtk_phy_update_bits(xfi_tphy->base + 0x50e4, 0xc0000, is_5g ? 0x0 : 0xc0000);
+ mtk_phy_update_bits(xfi_tphy->base + 0x50e8, 0x40000, is_5g ? 0x0 : 0x40000);
+ mtk_phy_update_bits(xfi_tphy->base + 0x50ec, 0xa00, is_1g ? 0x200 : 0x800);
+ mtk_phy_update_bits(xfi_tphy->base + 0x50a8, 0xee0000, is_5g ? 0x800000 :
+ 0x6e0000);
+ mtk_phy_update_bits(xfi_tphy->base + 0x6004, 0x190000, is_5g ? 0x0 : 0x190000);
+
+ if (is_10g)
+ writel(0x01423342, xfi_tphy->base + 0x00f8);
+ else if (is_5g)
+ writel(0x00a132a1, xfi_tphy->base + 0x00f8);
+ else if (is_2p5g)
+ writel(0x009c329c, xfi_tphy->base + 0x00f8);
+ else
+ writel(0x00fa32fa, xfi_tphy->base + 0x00f8);
+
+ /* Force SGDT_OUT off and select PCS */
+ mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_F4,
+ XFI_DPHY_AD_SGDT_FRC_EN | XFI_DPHY_PCS_SEL,
+ XFI_DPHY_AD_SGDT_FRC_EN |
+ (use_lynxi_pcs ? XFI_DPHY_PCS_SEL_SGMII :
+ XFI_DPHY_PCS_SEL_USXGMII));
+
+ /* Force GLB_CKDET_OUT */
+ mtk_phy_set_bits(xfi_tphy->base + 0x0030, 0xc00);
+
+ /* Force AEQ on */
+ writel(XTP_PCS_RX_EQ_IN_PROGRESS(2) | XTP_PCS_PWD_SYNC(2) | XTP_PCS_PWD_ASYNC(2),
+ xfi_tphy->base + REG_DIG_GLB_70);
+
+ usleep_range(1, 5);
+ writel(XTP_LN_FRC_TX_DATA_EN, xfi_tphy->base + REG_DIG_LN_TRX_40);
+
+ /* Setup TX DA default value */
+ mtk_phy_update_bits(xfi_tphy->base + 0x30b0, 0x30, 0x20);
+ writel(0x00008a01, xfi_tphy->base + 0x3028);
+ writel(0x0000a884, xfi_tphy->base + 0x302c);
+ writel(0x00083002, xfi_tphy->base + 0x3024);
+
+ /* Setup RG default value */
+ if (use_lynxi_pcs) {
+ writel(0x00011110, xfi_tphy->base + 0x3010);
+ writel(0x40704000, xfi_tphy->base + 0x3048);
+ } else {
+ writel(0x00022220, xfi_tphy->base + 0x3010);
+ writel(0x0f020a01, xfi_tphy->base + 0x5064);
+ writel(0x06100600, xfi_tphy->base + 0x50b4);
+ if (interface == PHY_INTERFACE_MODE_USXGMII)
+ writel(0x40704000, xfi_tphy->base + 0x3048);
+ else
+ writel(0x47684100, xfi_tphy->base + 0x3048);
+ }
+
+ if (is_1g)
+ writel(0x0000c000, xfi_tphy->base + 0x3064);
+
+ /* Setup RX EQ initial value */
+ mtk_phy_update_bits(xfi_tphy->base + 0x3050, 0xa8000000,
+ (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xa8000000 : 0x0);
+ mtk_phy_update_bits(xfi_tphy->base + 0x3054, 0xaa,
+ (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xaa : 0x0);
+
+ if (!use_lynxi_pcs)
+ writel(0x00000f00, xfi_tphy->base + 0x306c);
+ else if (is_2p5g)
+ writel(0x22000f00, xfi_tphy->base + 0x306c);
+ else
+ writel(0x20200f00, xfi_tphy->base + 0x306c);
+
+ mtk_phy_update_bits(xfi_tphy->base + 0xa008, 0x10000, da_war ? 0x10000 : 0x0);
+
+ mtk_phy_update_bits(xfi_tphy->base + 0xa060, 0x50000, use_lynxi_pcs ? 0x50000 : 0x40000);
+
+ /* Setup PHYA speed */
+ mtk_phy_update_bits(xfi_tphy->base + REG_ANA_GLB_D0,
+ XTP_GLB_USXGMII_SEL_MASK | XTP_GLB_USXGMII_EN,
+ is_10g ? XTP_GLB_USXGMII_SEL(0) :
+ is_5g ? XTP_GLB_USXGMII_SEL(1) :
+ is_2p5g ? XTP_GLB_USXGMII_SEL(2) :
+ XTP_GLB_USXGMII_SEL(3));
+ mtk_phy_set_bits(xfi_tphy->base + REG_ANA_GLB_D0, XTP_GLB_USXGMII_EN);
+
+ /* Release reset */
+ mtk_phy_set_bits(xfi_tphy->base + REG_DIG_GLB_70,
+ XTP_PCS_RST_B | XTP_FRC_PCS_RST_B);
+ usleep_range(150, 500);
+
+ /* Switch to P0 */
+ mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
+ XTP_PCS_IN_FR_RG |
+ XTP_FRC_PCS_PWD_ASYNC |
+ XTP_PCS_PWD_ASYNC_MASK |
+ XTP_PCS_PWD_SYNC_MASK |
+ XTP_PCS_UPDT,
+ XTP_PCS_IN_FR_RG |
+ XTP_FRC_PCS_PWD_ASYNC |
+ XTP_PCS_UPDT);
+ usleep_range(1, 5);
+
+ mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT);
+ usleep_range(15, 50);
+
+ if (use_lynxi_pcs) {
+ /* Switch to Gen2 */
+ mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
+ XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
+ XTP_PCS_MODE(1) | XTP_PCS_UPDT);
+ } else {
+ /* Switch to Gen3 */
+ mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
+ XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
+ XTP_PCS_MODE(2) | XTP_PCS_UPDT);
+ }
+ usleep_range(1, 5);
+
+ mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT);
+
+ usleep_range(100, 500);
+
+ /* Enable MAC CK */
+ mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_B0, XTP_LN_TX_MACCK_EN);
+ mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_F4, XFI_DPHY_AD_SGDT_FRC_EN);
+
+ /* Enable TX data */
+ mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_40,
+ XTP_LN_FRC_TX_DATA_EN | XTP_LN_TX_DATA_EN);
+ usleep_range(400, 1000);
+}
+
+/**
+ * mtk_xfi_tphy_set_mode() - Setup phy for specified interface mode.
+ *
+ * @phy: Phy instance.
+ * @mode: Only PHY_MODE_ETHERNET is supported.
+ * @submode: An Ethernet interface mode.
+ *
+ * Validate selected mode and call function mtk_xfi_tphy_setup().
+ *
+ * Return:
+ * * %0 - OK
+ * * %-EINVAL - invalid mode
+ */
+static int mtk_xfi_tphy_set_mode(struct phy *phy, enum phy_mode mode, int
+ submode)
+{
+ struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+ if (mode != PHY_MODE_ETHERNET)
+ return -EINVAL;
+
+ switch (submode) {
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_5GBASER:
+ case PHY_INTERFACE_MODE_10GBASER:
+ case PHY_INTERFACE_MODE_USXGMII:
+ mtk_xfi_tphy_setup(xfi_tphy, submode);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * mtk_xfi_tphy_reset() - Reset the phy.
+ *
+ * @phy: Phy instance.
+ *
+ * Reset the phy using the external reset controller.
+ *
+ * Return:
+ * %0 - OK
+ */
+static int mtk_xfi_tphy_reset(struct phy *phy)
+{
+ struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+ reset_control_assert(xfi_tphy->reset);
+ usleep_range(100, 500);
+ reset_control_deassert(xfi_tphy->reset);
+ usleep_range(1, 10);
+
+ return 0;
+}
+
+/**
+ * mtk_xfi_tphy_power_on() - Power-on the phy.
+ *
+ * @phy: Phy instance.
+ *
+ * Prepare and enable all clocks required for the phy to operate.
+ *
+ * Return:
+ * See clk_bulk_prepare_enable().
+ */
+static int mtk_xfi_tphy_power_on(struct phy *phy)
+{
+ struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+ return clk_bulk_prepare_enable(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
+}
+
+/**
+ * mtk_xfi_tphy_power_off() - Power-off the phy.
+ *
+ * @phy: Phy instance.
+ *
+ * Disable and unprepare all clocks previously enabled.
+ *
+ * Return:
+ * See clk_bulk_prepare_disable().
+ */
+static int mtk_xfi_tphy_power_off(struct phy *phy)
+{
+ struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+ clk_bulk_disable_unprepare(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
+
+ return 0;
+}
+
+static const struct phy_ops mtk_xfi_tphy_ops = {
+ .power_on = mtk_xfi_tphy_power_on,
+ .power_off = mtk_xfi_tphy_power_off,
+ .set_mode = mtk_xfi_tphy_set_mode,
+ .reset = mtk_xfi_tphy_reset,
+ .owner = THIS_MODULE,
+};
+
+/**
+ * mtk_xfi_tphy_probe() - Probe phy instance from Device Tree.
+ * @pdev: Matching platform device.
+ *
+ * The probe function gets IO resource, clocks, reset controller and
+ * whether the DA work-around for 10GBase-R is required from Device Tree and
+ * allocates memory for holding that information in a struct mtk_xfi_tphy.
+ *
+ * Return:
+ * * %0 - OK
+ * * %-ENODEV - Missing associated Device Tree node (should never happen).
+ * * %-ENOMEM - Out of memory.
+ * * Any error value which devm_platform_ioremap_resource(),
+ * devm_clk_bulk_get(), devm_reset_control_get_exclusive(),
+ * devm_phy_create() or devm_of_phy_provider_register() may return.
+ */
+static int mtk_xfi_tphy_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct phy_provider *phy_provider;
+ struct mtk_xfi_tphy *xfi_tphy;
+ struct phy *phy;
+ int ret;
+
+ if (!np)
+ return -ENODEV;
+
+ xfi_tphy = devm_kzalloc(&pdev->dev, sizeof(*xfi_tphy), GFP_KERNEL);
+ if (!xfi_tphy)
+ return -ENOMEM;
+
+ xfi_tphy->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(xfi_tphy->base))
+ return PTR_ERR(xfi_tphy->base);
+
+ xfi_tphy->dev = &pdev->dev;
+ xfi_tphy->clocks[0].id = "topxtal";
+ xfi_tphy->clocks[1].id = "xfipll";
+ ret = devm_clk_bulk_get(&pdev->dev, MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
+ if (ret)
+ return ret;
+
+ xfi_tphy->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(xfi_tphy->reset))
+ return PTR_ERR(xfi_tphy->reset);
+
+ xfi_tphy->da_war = of_property_read_bool(np, "mediatek,usxgmii-performance-errata");
+
+ phy = devm_phy_create(&pdev->dev, NULL, &mtk_xfi_tphy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, xfi_tphy);
+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id mtk_xfi_tphy_match[] = {
+ { .compatible = "mediatek,mt7988-xfi-tphy", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mtk_xfi_tphy_match);
+
+static struct platform_driver mtk_xfi_tphy_driver = {
+ .probe = mtk_xfi_tphy_probe,
+ .driver = {
+ .name = "mtk-xfi-tphy",
+ .of_match_table = mtk_xfi_tphy_match,
+ },
+};
+module_platform_driver(mtk_xfi_tphy_driver);
+
+MODULE_DESCRIPTION("MediaTek 10GE SerDes XFI T-PHY driver");
+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
+MODULE_AUTHOR("Bc-bocun Chen <bc-bocun.chen@mediatek.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index c5c8d70bc8..bf6a075903 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -20,7 +20,12 @@
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
-static struct class *phy_class;
+static void phy_release(struct device *dev);
+static const struct class phy_class = {
+ .name = "phy",
+ .dev_release = phy_release,
+};
+
static struct dentry *phy_debugfs_root;
static DEFINE_MUTEX(phy_provider_mutex);
static LIST_HEAD(phy_provider_list);
@@ -753,7 +758,7 @@ struct phy *of_phy_simple_xlate(struct device *dev,
struct phy *phy;
struct class_dev_iter iter;
- class_dev_iter_init(&iter, phy_class, NULL, NULL);
+ class_dev_iter_init(&iter, &phy_class, NULL, NULL);
while ((dev = class_dev_iter_next(&iter))) {
phy = to_phy(dev);
if (args->np != phy->dev.of_node)
@@ -1016,7 +1021,7 @@ struct phy *phy_create(struct device *dev, struct device_node *node,
device_initialize(&phy->dev);
mutex_init(&phy->mutex);
- phy->dev.class = phy_class;
+ phy->dev.class = &phy_class;
phy->dev.parent = dev;
phy->dev.of_node = node ?: dev->of_node;
phy->id = id;
@@ -1285,14 +1290,13 @@ static void phy_release(struct device *dev)
static int __init phy_core_init(void)
{
- phy_class = class_create("phy");
- if (IS_ERR(phy_class)) {
- pr_err("failed to create phy class --> %ld\n",
- PTR_ERR(phy_class));
- return PTR_ERR(phy_class);
- }
+ int err;
- phy_class->dev_release = phy_release;
+ err = class_register(&phy_class);
+ if (err) {
+ pr_err("failed to register phy class");
+ return err;
+ }
phy_debugfs_root = debugfs_create_dir("phy", NULL);
@@ -1303,6 +1307,6 @@ device_initcall(phy_core_init);
static void __exit phy_core_exit(void)
{
debugfs_remove_recursive(phy_debugfs_root);
- class_destroy(phy_class);
+ class_unregister(&phy_class);
}
module_exit(phy_core_exit);
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 9818d994c6..da2b32fb5b 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
+#include <linux/phy/phy-dp.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
@@ -23,6 +24,7 @@
#include "phy-qcom-qmp-dp-phy.h"
#include "phy-qcom-qmp-qserdes-com-v4.h"
+#include "phy-qcom-qmp-qserdes-com-v6.h"
/* EDP_PHY registers */
#define DP_PHY_CFG 0x0010
@@ -69,19 +71,32 @@
#define TXn_TRAN_DRVR_EMP_EN 0x0078
-struct qcom_edp_cfg {
- bool is_dp;
-
- /* DP PHY swing and pre_emphasis tables */
+struct qcom_edp_swing_pre_emph_cfg {
const u8 (*swing_hbr_rbr)[4][4];
const u8 (*swing_hbr3_hbr2)[4][4];
const u8 (*pre_emphasis_hbr_rbr)[4][4];
const u8 (*pre_emphasis_hbr3_hbr2)[4][4];
};
+struct qcom_edp;
+
+struct phy_ver_ops {
+ int (*com_power_on)(const struct qcom_edp *edp);
+ int (*com_resetsm_cntrl)(const struct qcom_edp *edp);
+ int (*com_bias_en_clkbuflr)(const struct qcom_edp *edp);
+ int (*com_configure_pll)(const struct qcom_edp *edp);
+ int (*com_configure_ssc)(const struct qcom_edp *edp);
+};
+
+struct qcom_edp_phy_cfg {
+ bool is_edp;
+ const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
+ const struct phy_ver_ops *ver_ops;
+};
+
struct qcom_edp {
struct device *dev;
- const struct qcom_edp_cfg *cfg;
+ const struct qcom_edp_phy_cfg *cfg;
struct phy *phy;
@@ -97,6 +112,8 @@ struct qcom_edp {
struct clk_bulk_data clks[2];
struct regulator_bulk_data supplies[2];
+
+ bool is_edp;
};
static const u8 dp_swing_hbr_rbr[4][4] = {
@@ -127,8 +144,7 @@ static const u8 dp_pre_emp_hbr2_hbr3[4][4] = {
{ 0x04, 0xff, 0xff, 0xff }
};
-static const struct qcom_edp_cfg dp_phy_cfg = {
- .is_dp = true,
+static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg = {
.swing_hbr_rbr = &dp_swing_hbr_rbr,
.swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3,
.pre_emphasis_hbr_rbr = &dp_pre_emp_hbr_rbr,
@@ -163,8 +179,7 @@ static const u8 edp_pre_emp_hbr2_hbr3[4][4] = {
{ 0x00, 0xff, 0xff, 0xff }
};
-static const struct qcom_edp_cfg edp_phy_cfg = {
- .is_dp = false,
+static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
.swing_hbr_rbr = &edp_swing_hbr_rbr,
.swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3,
.pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr,
@@ -174,7 +189,6 @@ static const struct qcom_edp_cfg edp_phy_cfg = {
static int qcom_edp_phy_init(struct phy *phy)
{
struct qcom_edp *edp = phy_get_drvdata(phy);
- const struct qcom_edp_cfg *cfg = edp->cfg;
int ret;
u8 cfg8;
@@ -190,8 +204,9 @@ static int qcom_edp_phy_init(struct phy *phy)
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
edp->edp + DP_PHY_PD_CTL);
- /* Turn on BIAS current for PHY/PLL */
- writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+ ret = edp->cfg->ver_ops->com_bias_en_clkbuflr(edp);
+ if (ret)
+ return ret;
writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
msleep(20);
@@ -201,7 +216,12 @@ static int qcom_edp_phy_init(struct phy *phy)
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
edp->edp + DP_PHY_PD_CTL);
- if (cfg && cfg->is_dp)
+ /*
+ * TODO: Re-work the conditions around setting the cfg8 value
+ * when more information becomes available about why this is
+ * even needed.
+ */
+ if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
cfg8 = 0xb7;
else
cfg8 = 0x37;
@@ -235,7 +255,7 @@ out_disable_supplies:
static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configure_opts_dp *dp_opts)
{
- const struct qcom_edp_cfg *cfg = edp->cfg;
+ const struct qcom_edp_swing_pre_emph_cfg *cfg = edp->cfg->swing_pre_emph_cfg;
unsigned int v_level = 0;
unsigned int p_level = 0;
u8 ldo_config;
@@ -246,6 +266,9 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur
if (!cfg)
return 0;
+ if (edp->is_edp)
+ cfg = &edp_phy_swing_pre_emph_cfg;
+
for (i = 0; i < dp_opts->lanes; i++) {
v_level = max(v_level, dp_opts->voltage[i]);
p_level = max(p_level, dp_opts->pre[i]);
@@ -262,7 +285,7 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur
if (swing == 0xff || emph == 0xff)
return -EINVAL;
- ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
+ ldo_config = edp->is_edp ? 0x0 : 0x1;
writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
writel(swing, edp->tx0 + TXn_TX_DRV_LVL);
@@ -291,6 +314,84 @@ static int qcom_edp_phy_configure(struct phy *phy, union phy_configure_opts *opt
static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
{
+ return edp->cfg->ver_ops->com_configure_ssc(edp);
+}
+
+static int qcom_edp_configure_pll(const struct qcom_edp *edp)
+{
+ return edp->cfg->ver_ops->com_configure_pll(edp);
+}
+
+static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 vco_div;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ vco_div = 0x1;
+ *pixel_freq = 1620000000UL / 2;
+ break;
+
+ case 2700:
+ vco_div = 0x1;
+ *pixel_freq = 2700000000UL / 2;
+ break;
+
+ case 5400:
+ vco_div = 0x2;
+ *pixel_freq = 5400000000UL / 4;
+ break;
+
+ case 8100:
+ vco_div = 0x0;
+ *pixel_freq = 8100000000UL / 6;
+ break;
+
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+
+ writel(vco_div, edp->edp + DP_PHY_VCO_DIV);
+
+ return 0;
+}
+
+static int qcom_edp_phy_power_on_v4(const struct qcom_edp *edp)
+{
+ u32 val;
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ edp->edp + DP_PHY_PD_CTL);
+ writel(0xfc, edp->edp + DP_PHY_MODE);
+
+ return readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
+ val, val & BIT(7), 5, 200);
+}
+
+static int qcom_edp_phy_com_resetsm_cntrl_v4(const struct qcom_edp *edp)
+{
+ u32 val;
+
+ writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
+
+ return readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
+ val, val & BIT(0), 500, 10000);
+}
+
+static int qcom_edp_com_bias_en_clkbuflr_v4(const struct qcom_edp *edp)
+{
+ /* Turn on BIAS current for PHY/PLL */
+ writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ return 0;
+}
+
+static int qcom_edp_com_configure_ssc_v4(const struct qcom_edp *edp)
+{
const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
u32 step1;
u32 step2;
@@ -323,7 +424,7 @@ static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
return 0;
}
-static int qcom_edp_configure_pll(const struct qcom_edp *edp)
+static int qcom_edp_com_configure_pll_v4(const struct qcom_edp *edp)
{
const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
u32 div_frac_start2_mode0;
@@ -409,30 +510,150 @@ static int qcom_edp_configure_pll(const struct qcom_edp *edp)
return 0;
}
-static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq)
+static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
+ .com_power_on = qcom_edp_phy_power_on_v4,
+ .com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v4,
+ .com_bias_en_clkbuflr = qcom_edp_com_bias_en_clkbuflr_v4,
+ .com_configure_pll = qcom_edp_com_configure_pll_v4,
+ .com_configure_ssc = qcom_edp_com_configure_ssc_v4,
+};
+
+static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
+ .ver_ops = &qcom_edp_phy_ops_v4,
+};
+
+static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
+ .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+ .ver_ops = &qcom_edp_phy_ops_v4,
+};
+
+static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
+ .is_edp = true,
+ .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
+ .ver_ops = &qcom_edp_phy_ops_v4,
+};
+
+static int qcom_edp_phy_power_on_v6(const struct qcom_edp *edp)
+{
+ u32 val;
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ edp->edp + DP_PHY_PD_CTL);
+ writel(0xfc, edp->edp + DP_PHY_MODE);
+
+ return readl_poll_timeout(edp->pll + QSERDES_V6_COM_CMN_STATUS,
+ val, val & BIT(7), 5, 200);
+}
+
+static int qcom_edp_phy_com_resetsm_cntrl_v6(const struct qcom_edp *edp)
+{
+ u32 val;
+
+ writel(0x20, edp->pll + QSERDES_V6_COM_RESETSM_CNTRL);
+
+ return readl_poll_timeout(edp->pll + QSERDES_V6_COM_C_READY_STATUS,
+ val, val & BIT(0), 500, 10000);
+}
+
+static int qcom_edp_com_bias_en_clkbuflr_v6(const struct qcom_edp *edp)
+{
+ /* Turn on BIAS current for PHY/PLL */
+ writel(0x1f, edp->pll + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN);
+
+ return 0;
+}
+
+static int qcom_edp_com_configure_ssc_v6(const struct qcom_edp *edp)
{
const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
- u32 vco_div;
+ u32 step1;
+ u32 step2;
switch (dp_opts->link_rate) {
case 1620:
- vco_div = 0x1;
- *pixel_freq = 1620000000UL / 2;
+ case 2700:
+ case 8100:
+ step1 = 0x92;
+ step2 = 0x01;
+ break;
+
+ case 5400:
+ step1 = 0x18;
+ step2 = 0x02;
+ break;
+
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+
+ writel(0x01, edp->pll + QSERDES_V6_COM_SSC_EN_CENTER);
+ writel(0x00, edp->pll + QSERDES_V6_COM_SSC_ADJ_PER1);
+ writel(0x36, edp->pll + QSERDES_V6_COM_SSC_PER1);
+ writel(0x01, edp->pll + QSERDES_V6_COM_SSC_PER2);
+ writel(step1, edp->pll + QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0);
+ writel(step2, edp->pll + QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0);
+
+ return 0;
+}
+
+static int qcom_edp_com_configure_pll_v6(const struct qcom_edp *edp)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 div_frac_start2_mode0;
+ u32 div_frac_start3_mode0;
+ u32 dec_start_mode0;
+ u32 lock_cmp1_mode0;
+ u32 lock_cmp2_mode0;
+ u32 code1_mode0;
+ u32 code2_mode0;
+ u32 hsclk_sel;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ hsclk_sel = 0x5;
+ dec_start_mode0 = 0x34;
+ div_frac_start2_mode0 = 0xc0;
+ div_frac_start3_mode0 = 0x0b;
+ lock_cmp1_mode0 = 0x37;
+ lock_cmp2_mode0 = 0x04;
+ code1_mode0 = 0x71;
+ code2_mode0 = 0x0c;
break;
case 2700:
- vco_div = 0x1;
- *pixel_freq = 2700000000UL / 2;
+ hsclk_sel = 0x3;
+ dec_start_mode0 = 0x34;
+ div_frac_start2_mode0 = 0xc0;
+ div_frac_start3_mode0 = 0x0b;
+ lock_cmp1_mode0 = 0x07;
+ lock_cmp2_mode0 = 0x07;
+ code1_mode0 = 0x71;
+ code2_mode0 = 0x0c;
break;
case 5400:
- vco_div = 0x2;
- *pixel_freq = 5400000000UL / 4;
+ hsclk_sel = 0x1;
+ dec_start_mode0 = 0x46;
+ div_frac_start2_mode0 = 0x00;
+ div_frac_start3_mode0 = 0x05;
+ lock_cmp1_mode0 = 0x0f;
+ lock_cmp2_mode0 = 0x0e;
+ code1_mode0 = 0x97;
+ code2_mode0 = 0x10;
break;
case 8100:
- vco_div = 0x0;
- *pixel_freq = 8100000000UL / 6;
+ hsclk_sel = 0x0;
+ dec_start_mode0 = 0x34;
+ div_frac_start2_mode0 = 0xc0;
+ div_frac_start3_mode0 = 0x0b;
+ lock_cmp1_mode0 = 0x17;
+ lock_cmp2_mode0 = 0x15;
+ code1_mode0 = 0x71;
+ code2_mode0 = 0x0c;
break;
default:
@@ -440,36 +661,72 @@ static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel
return -EINVAL;
}
- writel(vco_div, edp->edp + DP_PHY_VCO_DIV);
+ writel(0x01, edp->pll + QSERDES_V6_COM_SVS_MODE_CLK_SEL);
+ writel(0x0b, edp->pll + QSERDES_V6_COM_SYSCLK_EN_SEL);
+ writel(0x02, edp->pll + QSERDES_V6_COM_SYS_CLK_CTRL);
+ writel(0x0c, edp->pll + QSERDES_V6_COM_CLK_ENABLE1);
+ writel(0x06, edp->pll + QSERDES_V6_COM_SYSCLK_BUF_ENABLE);
+ writel(0x30, edp->pll + QSERDES_V6_COM_CLK_SELECT);
+ writel(hsclk_sel, edp->pll + QSERDES_V6_COM_HSCLK_SEL_1);
+ writel(0x07, edp->pll + QSERDES_V6_COM_PLL_IVCO);
+ writel(0x08, edp->pll + QSERDES_V6_COM_LOCK_CMP_EN);
+ writel(0x36, edp->pll + QSERDES_V6_COM_PLL_CCTRL_MODE0);
+ writel(0x16, edp->pll + QSERDES_V6_COM_PLL_RCTRL_MODE0);
+ writel(0x06, edp->pll + QSERDES_V6_COM_CP_CTRL_MODE0);
+ writel(dec_start_mode0, edp->pll + QSERDES_V6_COM_DEC_START_MODE0);
+ writel(0x00, edp->pll + QSERDES_V6_COM_DIV_FRAC_START1_MODE0);
+ writel(div_frac_start2_mode0, edp->pll + QSERDES_V6_COM_DIV_FRAC_START2_MODE0);
+ writel(div_frac_start3_mode0, edp->pll + QSERDES_V6_COM_DIV_FRAC_START3_MODE0);
+ writel(0x12, edp->pll + QSERDES_V6_COM_CMN_CONFIG_1);
+ writel(0x3f, edp->pll + QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE0);
+ writel(0x00, edp->pll + QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE0);
+ writel(0x00, edp->pll + QSERDES_V6_COM_VCO_TUNE_MAP);
+ writel(lock_cmp1_mode0, edp->pll + QSERDES_V6_COM_LOCK_CMP1_MODE0);
+ writel(lock_cmp2_mode0, edp->pll + QSERDES_V6_COM_LOCK_CMP2_MODE0);
+
+ writel(0x0a, edp->pll + QSERDES_V6_COM_BG_TIMER);
+ writel(0x14, edp->pll + QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0);
+ writel(0x00, edp->pll + QSERDES_V6_COM_VCO_TUNE_CTRL);
+ writel(0x1f, edp->pll + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN);
+ writel(0x0f, edp->pll + QSERDES_V6_COM_CORE_CLK_EN);
+ writel(0xa0, edp->pll + QSERDES_V6_COM_VCO_TUNE1_MODE0);
+ writel(0x03, edp->pll + QSERDES_V6_COM_VCO_TUNE2_MODE0);
+
+ writel(code1_mode0, edp->pll + QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0);
+ writel(code2_mode0, edp->pll + QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0);
return 0;
}
+static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
+ .com_power_on = qcom_edp_phy_power_on_v6,
+ .com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v6,
+ .com_bias_en_clkbuflr = qcom_edp_com_bias_en_clkbuflr_v6,
+ .com_configure_pll = qcom_edp_com_configure_pll_v6,
+ .com_configure_ssc = qcom_edp_com_configure_ssc_v6,
+};
+
+static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
+ .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+ .ver_ops = &qcom_edp_phy_ops_v6,
+};
+
static int qcom_edp_phy_power_on(struct phy *phy)
{
const struct qcom_edp *edp = phy_get_drvdata(phy);
- const struct qcom_edp_cfg *cfg = edp->cfg;
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
unsigned long pixel_freq;
- u8 ldo_config;
- int timeout;
+ u8 ldo_config = 0x0;
int ret;
u32 val;
u8 cfg1;
- writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
- DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
- DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- edp->edp + DP_PHY_PD_CTL);
- writel(0xfc, edp->edp + DP_PHY_MODE);
-
- timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
- val, val & BIT(7), 5, 200);
- if (timeout)
- return timeout;
-
+ ret = edp->cfg->ver_ops->com_power_on(edp);
+ if (ret)
+ return ret;
- ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
+ if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
+ ldo_config = 0x1;
writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
@@ -513,12 +770,9 @@ static int qcom_edp_phy_power_on(struct phy *phy)
writel(0x01, edp->edp + DP_PHY_CFG);
writel(0x09, edp->edp + DP_PHY_CFG);
- writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
-
- timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
- val, val & BIT(0), 500, 10000);
- if (timeout)
- return timeout;
+ ret = edp->cfg->ver_ops->com_resetsm_cntrl(edp);
+ if (ret)
+ return ret;
writel(0x19, edp->edp + DP_PHY_CFG);
writel(0x1f, edp->tx0 + TXn_HIGHZ_DRVR_EN);
@@ -590,6 +844,18 @@ static int qcom_edp_phy_power_off(struct phy *phy)
return 0;
}
+static int qcom_edp_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ struct qcom_edp *edp = phy_get_drvdata(phy);
+
+ if (mode != PHY_MODE_DP)
+ return -EINVAL;
+
+ edp->is_edp = submode == PHY_SUBMODE_EDP;
+
+ return 0;
+}
+
static int qcom_edp_phy_exit(struct phy *phy)
{
struct qcom_edp *edp = phy_get_drvdata(phy);
@@ -605,6 +871,7 @@ static const struct phy_ops qcom_edp_ops = {
.configure = qcom_edp_phy_configure,
.power_on = qcom_edp_phy_power_on,
.power_off = qcom_edp_phy_power_off,
+ .set_mode = qcom_edp_phy_set_mode,
.exit = qcom_edp_phy_exit,
.owner = THIS_MODULE,
};
@@ -782,6 +1049,7 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
edp->dev = dev;
edp->cfg = of_device_get_match_data(&pdev->dev);
+ edp->is_edp = edp->cfg->is_edp;
edp->edp = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(edp->edp))
@@ -840,10 +1108,11 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
}
static const struct of_device_id qcom_edp_phy_match_table[] = {
- { .compatible = "qcom,sc7280-edp-phy" },
- { .compatible = "qcom,sc8180x-edp-phy" },
- { .compatible = "qcom,sc8280xp-dp-phy", .data = &dp_phy_cfg },
- { .compatible = "qcom,sc8280xp-edp-phy", .data = &edp_phy_cfg },
+ { .compatible = "qcom,sc7280-edp-phy", .data = &sc7280_dp_phy_cfg, },
+ { .compatible = "qcom,sc8180x-edp-phy", .data = &sc7280_dp_phy_cfg, },
+ { .compatible = "qcom,sc8280xp-dp-phy", .data = &sc8280xp_dp_phy_cfg, },
+ { .compatible = "qcom,sc8280xp-edp-phy", .data = &sc8280xp_edp_phy_cfg, },
+ { .compatible = "qcom,x1e80100-dp-phy", .data = &x1e80100_phy_cfg, },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_edp_phy_match_table);
diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index a43e20abb1..68cc8e24f3 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -88,6 +88,12 @@ static const u32 pm8550b_init_tbl[NUM_TUNE_FIELDS] = {
[TUNE_USB2_PREEM] = 0x5,
};
+static const u32 smb2360_init_tbl[NUM_TUNE_FIELDS] = {
+ [TUNE_IUSB2] = 0x5,
+ [TUNE_SQUELCH_U] = 0x3,
+ [TUNE_USB2_PREEM] = 0x2,
+};
+
static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = {
.init_tbl = pm8550b_init_tbl,
.init_tbl_num = ARRAY_SIZE(pm8550b_init_tbl),
@@ -95,6 +101,13 @@ static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = {
.num_vregs = ARRAY_SIZE(pm8550b_vreg_l),
};
+static const struct eusb2_repeater_cfg smb2360_eusb2_cfg = {
+ .init_tbl = smb2360_init_tbl,
+ .init_tbl_num = ARRAY_SIZE(smb2360_init_tbl),
+ .vreg_list = pm8550b_vreg_l,
+ .num_vregs = ARRAY_SIZE(pm8550b_vreg_l),
+};
+
static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr)
{
int num = rptr->cfg->num_vregs;
@@ -271,6 +284,10 @@ static const struct of_device_id eusb2_repeater_of_match_table[] = {
.compatible = "qcom,pm8550b-eusb2-repeater",
.data = &pm8550b_eusb2_cfg,
},
+ {
+ .compatible = "qcom,smb2360-eusb2-repeater",
+ .data = &smb2360_eusb2_cfg,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, eusb2_repeater_of_match_table);
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index b8919443e4..7b00945f71 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2620,8 +2620,6 @@ static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp)
writel(0x20, qmp->dp_tx2 + cfg->regs[QPHY_TX_TX_EMP_POST1_LVL]);
return 0;
-
- return 0;
}
/*
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 8836bb1ff0..8fcdcb193d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -22,6 +22,8 @@
#include <linux/reset.h>
#include <linux/slab.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+
#include "phy-qcom-qmp-common.h"
#include "phy-qcom-qmp.h"
@@ -2246,6 +2248,7 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_pcs_alt_tbl[] = {
};
static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_serdes_alt_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
@@ -2272,7 +2275,6 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl[]
QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
- QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
@@ -2389,6 +2391,9 @@ struct qmp_phy_cfg {
/* QMP PHY pipe clock interface rate */
unsigned long pipe_clock_rate;
+
+ /* QMP PHY AUX clock interface rate */
+ unsigned long aux_clock_rate;
};
struct qmp_pcie {
@@ -2420,6 +2425,7 @@ struct qmp_pcie {
int mode;
struct clk_fixed_rate pipe_clk_fixed;
+ struct clk_fixed_rate aux_clk_fixed;
};
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
@@ -3135,6 +3141,9 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
+
+ /* 20MHz PHY AUX Clock */
+ .aux_clock_rate = 20000000,
};
static const struct qmp_phy_cfg sm8550_qmp_gen3x2_pciephy_cfg = {
@@ -3192,6 +3201,9 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
.has_nocsr_reset = true,
+
+ /* 20MHz PHY AUX Clock */
+ .aux_clock_rate = 20000000,
};
static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = {
@@ -3222,6 +3234,9 @@ static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
.has_nocsr_reset = true,
+
+ /* 20MHz PHY AUX Clock */
+ .aux_clock_rate = 20000000,
};
static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
@@ -3291,6 +3306,13 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x4_pciephy_cfg = {
.pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
},
+ .tbls_ep = &(const struct qmp_phy_cfg_tbls) {
+ .serdes = sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
+ .serdes_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
+ .pcs_misc = sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl),
+ },
+
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -3664,7 +3686,7 @@ static int phy_pipe_clk_register(struct qmp_pcie *qmp, struct device_node *np)
struct clk_init_data init = { };
int ret;
- ret = of_property_read_string(np, "clock-output-names", &init.name);
+ ret = of_property_read_string_index(np, "clock-output-names", 0, &init.name);
if (ret) {
dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
return ret;
@@ -3683,14 +3705,84 @@ static int phy_pipe_clk_register(struct qmp_pcie *qmp, struct device_node *np)
fixed->hw.init = &init;
- ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
- if (ret)
- return ret;
+ return devm_clk_hw_register(qmp->dev, &fixed->hw);
+}
- ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
+/*
+ * Register a fixed rate PHY aux clock.
+ *
+ * The <s>_phy_aux_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_phy_aux_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_phy_aux_clksrc here. The gcc driver takes care
+ * of assigning this <s>_phy_aux_clksrc as parent to <s>_phy_aux_clk.
+ * Below picture shows this relationship.
+ *
+ * +---------------+
+ * | PHY block |<<---------------------------------------------+
+ * | | |
+ * | +-------+ | +-----+ |
+ * I/P---^-->| PLL |---^--->phy_aux_clksrc--->| GCC |--->phy_aux_clk---+
+ * clk | +-------+ | +-----+
+ * +---------------+
+ */
+static int phy_aux_clk_register(struct qmp_pcie *qmp, struct device_node *np)
+{
+ struct clk_fixed_rate *fixed = &qmp->aux_clk_fixed;
+ struct clk_init_data init = { };
+ char name[64];
+
+ snprintf(name, sizeof(name), "%s::phy_aux_clk", dev_name(qmp->dev));
+
+ init.name = name;
+ init.ops = &clk_fixed_rate_ops;
+
+ fixed->fixed_rate = qmp->cfg->aux_clock_rate;
+ fixed->hw.init = &init;
+
+ return devm_clk_hw_register(qmp->dev, &fixed->hw);
+}
+
+static struct clk_hw *qmp_pcie_clk_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct qmp_pcie *qmp = data;
+
+ /* Support legacy bindings */
+ if (!clkspec->args_count)
+ return &qmp->pipe_clk_fixed.hw;
+
+ switch (clkspec->args[0]) {
+ case QMP_PCIE_PIPE_CLK:
+ return &qmp->pipe_clk_fixed.hw;
+ case QMP_PCIE_PHY_AUX_CLK:
+ return &qmp->aux_clk_fixed.hw;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int qmp_pcie_register_clocks(struct qmp_pcie *qmp, struct device_node *np)
+{
+ int ret;
+
+ ret = phy_pipe_clk_register(qmp, np);
if (ret)
return ret;
+ if (qmp->cfg->aux_clock_rate) {
+ ret = phy_aux_clk_register(qmp, np);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, qmp_pcie_clk_hw_get, qmp);
+ if (ret)
+ return ret;
+ } else {
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &qmp->pipe_clk_fixed.hw);
+ if (ret)
+ return ret;
+ }
+
/*
* Roll a devm action because the clock provider is the child node, but
* the child node is not actually a device.
@@ -3899,7 +3991,7 @@ static int qmp_pcie_probe(struct platform_device *pdev)
if (ret)
goto err_node_put;
- ret = phy_pipe_clk_register(qmp, np);
+ ret = qmp_pcie_register_clocks(qmp, np);
if (ret)
goto err_node_put;
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
index 970cc06678..f19f9892ed 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
@@ -30,5 +30,9 @@
#define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1 0x1f4
#define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1 0x1fc
#define QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME 0x220
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S4 0x240
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S5 0x244
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S6 0x248
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S7 0x24c
#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
index d9a87bd955..d17a523579 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
@@ -25,12 +25,15 @@
#define QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4 0xf0
#define QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS 0xf4
#define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178
+#define QSERDES_UFS_V6_RX_RX_EQU_ADAPTOR_CNTRL4 0x1ac
#define QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x1bc
#define QSERDES_UFS_V6_RX_INTERFACE_MODE 0x1e0
#define QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3 0x1c4
#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208
#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B2 0x210
#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3 0x214
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B4 0x218
#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6 0x220
#define QSERDES_UFS_V6_RX_MODE_RATE2_B3 0x238
#define QSERDES_UFS_V6_RX_MODE_RATE2_B6 0x244
@@ -38,6 +41,9 @@
#define QSERDES_UFS_V6_RX_MODE_RATE3_B4 0x260
#define QSERDES_UFS_V6_RX_MODE_RATE3_B5 0x264
#define QSERDES_UFS_V6_RX_MODE_RATE3_B8 0x270
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B0 0x274
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B1 0x278
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B2 0x27c
#define QSERDES_UFS_V6_RX_MODE_RATE4_B3 0x280
#define QSERDES_UFS_V6_RX_MODE_RATE4_B4 0x284
#define QSERDES_UFS_V6_RX_MODE_RATE4_B6 0x28c
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 590432d581..a57e8a4657 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -722,6 +722,38 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_pcs[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),
};
+static const struct qmp_phy_init_tbl sm8475_ufsphy_serdes[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8475_ufsphy_g4_serdes[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8475_ufsphy_g4_pcs[] = {
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x0b),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
+};
+
static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
@@ -830,17 +862,20 @@ static const struct qmp_phy_init_tbl sm8650_ufsphy_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO_MODE1, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IETRIM, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IPTRIM, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99),
@@ -848,17 +883,28 @@ static const struct qmp_phy_init_tbl sm8650_ufsphy_serdes[] = {
};
static const struct qmp_phy_init_tbl sm8650_ufsphy_tx[] = {
- QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x01),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
};
static const struct qmp_phy_init_tbl sm8650_ufsphy_rx[] = {
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
- QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0f),
- QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
- QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
- QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x3e),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xce),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xce),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B2, 0x18),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B4, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6, 0x60),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B3, 0x9e),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B6, 0x60),
@@ -866,23 +912,41 @@ static const struct qmp_phy_init_tbl sm8650_ufsphy_rx[] = {
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B4, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B5, 0x36),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B2, 0x20),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9),
- QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B6, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B4, 0x4f),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_SATURATION, 0x1f),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CTRL1, 0x94),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_RX_TERM_BW_CTRL0, 0xfa),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL, 0x30),
};
static const struct qmp_phy_init_tbl sm8650_ufsphy_pcs[] = {
- QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PCS_CTRL1, 0xc1),
- QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x68),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S4, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S5, 0x12),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S6, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S7, 0x19),
+};
+
+static const struct qmp_phy_init_tbl sm8650_ufsphy_g4_pcs[] = {
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x13),
QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
- QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
- QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69),
- QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8650_ufsphy_g5_pcs[] = {
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x05),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4d),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e),
};
struct qmp_ufs_offsets {
@@ -1346,6 +1410,42 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
.regs = ufsphy_v5_regs_layout,
};
+static const struct qmp_phy_cfg sm8475_ufsphy_cfg = {
+ .lanes = 2,
+
+ .offsets = &qmp_ufs_offsets_v6,
+ .max_supported_gear = UFS_HS_G4,
+
+ .tbls = {
+ .serdes = sm8475_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sm8475_ufsphy_serdes),
+ .tx = sm8550_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sm8550_ufsphy_tx),
+ .rx = sm8550_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sm8550_ufsphy_rx),
+ .pcs = sm8550_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs),
+ },
+ .tbls_hs_b = {
+ .serdes = sm8550_ufsphy_hs_b_serdes,
+ .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes),
+ },
+ .tbls_hs_overlay[0] = {
+ .serdes = sm8475_ufsphy_g4_serdes,
+ .serdes_num = ARRAY_SIZE(sm8475_ufsphy_g4_serdes),
+ .tx = sm8550_ufsphy_g4_tx,
+ .tx_num = ARRAY_SIZE(sm8550_ufsphy_g4_tx),
+ .rx = sm8550_ufsphy_g4_rx,
+ .rx_num = ARRAY_SIZE(sm8550_ufsphy_g4_rx),
+ .pcs = sm8475_ufsphy_g4_pcs,
+ .pcs_num = ARRAY_SIZE(sm8475_ufsphy_g4_pcs),
+ .max_gear = UFS_HS_G4,
+ },
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = ufsphy_v6_regs_layout,
+};
+
static const struct qmp_phy_cfg sm8550_ufsphy_cfg = {
.lanes = 2,
@@ -1407,6 +1507,17 @@ static const struct qmp_phy_cfg sm8650_ufsphy_cfg = {
.pcs = sm8650_ufsphy_pcs,
.pcs_num = ARRAY_SIZE(sm8650_ufsphy_pcs),
},
+ .tbls_hs_overlay[0] = {
+ .pcs = sm8650_ufsphy_g4_pcs,
+ .pcs_num = ARRAY_SIZE(sm8650_ufsphy_g4_pcs),
+ .max_gear = UFS_HS_G4,
+ },
+ .tbls_hs_overlay[1] = {
+ .pcs = sm8650_ufsphy_g5_pcs,
+ .pcs_num = ARRAY_SIZE(sm8650_ufsphy_g5_pcs),
+ .max_gear = UFS_HS_G5,
+ },
+
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = ufsphy_v6_regs_layout,
@@ -1942,6 +2053,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
.compatible = "qcom,sm8450-qmp-ufs-phy",
.data = &sm8450_ufsphy_cfg,
}, {
+ .compatible = "qcom,sm8475-qmp-ufs-phy",
+ .data = &sm8475_ufsphy_cfg,
+ }, {
.compatible = "qcom,sm8550-qmp-ufs-phy",
.data = &sm8550_ufsphy_cfg,
}, {
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 85253936fa..c174463c58 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -337,6 +337,29 @@ static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V2_PCS_POWER_STATE_CONFIG2, 0x08),
};
+static const struct qmp_phy_init_tbl qdu1000_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xc4),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x89),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qdu1000_usb3_uniphy_pcs_usb_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_POWER_STATE_CONFIG1, 0x6f),
+};
+
static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
@@ -1400,6 +1423,27 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
.regs = qmp_v2_usb3phy_regs_layout,
};
+static const struct qmp_phy_cfg qdu1000_usb3_uniphy_cfg = {
+ .offsets = &qmp_usb_offsets_v5,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8350_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8350_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
+ .pcs_tbl = qdu1000_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qdu1000_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = qdu1000_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(qdu1000_usb3_uniphy_pcs_usb_tbl),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x1000,
+
+ .has_pwrdn_delay = true,
+};
+
static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
.offsets = &qmp_usb_offsets_v5,
@@ -2203,6 +2247,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
.compatible = "qcom,msm8996-qmp-usb3-phy",
.data = &msm8996_usb3phy_cfg,
}, {
+ .compatible = "qcom,qdu1000-qmp-usb3-uni-phy",
+ .data = &qdu1000_usb3_uniphy_cfg,
+ }, {
.compatible = "qcom,sa8775p-qmp-usb3-uni-phy",
.data = &sa8775p_usb3_uniphy_cfg,
}, {
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index b60a4b6045..4902633750 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -86,7 +86,9 @@ config PHY_ROCKCHIP_PCIE
config PHY_ROCKCHIP_SAMSUNG_HDPTX
tristate "Rockchip Samsung HDMI/eDP Combo PHY driver"
depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+ depends on HAS_IOMEM
select GENERIC_PHY
+ select MFD_SYSCON
select RATIONAL
help
Enable this to support the Rockchip HDMI/eDP Combo PHY
@@ -116,3 +118,15 @@ config PHY_ROCKCHIP_USB
select GENERIC_PHY
help
Enable this to support the Rockchip USB 2.0 PHY.
+
+config PHY_ROCKCHIP_USBDP
+ tristate "Rockchip USBDP COMBO PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ depends on TYPEC
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip USB3.0/DP combo PHY with
+ Samsung IP block. This is required for USB3 support on RK3588.
+
+ To compile this driver as a module, choose M here: the module
+ will be called phy-rockchip-usbdp
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index 3d911304e6..010a824e32 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_PHY_ROCKCHIP_SAMSUNG_HDPTX) += phy-rockchip-samsung-hdptx.o
obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3) += phy-rockchip-snps-pcie3.o
obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_USBDP) += phy-rockchip-usbdp.o
diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index bf74e429ff..0a9989e412 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -248,7 +248,7 @@ static int rockchip_combphy_exit(struct phy *phy)
return 0;
}
-static const struct phy_ops rochchip_combphy_ops = {
+static const struct phy_ops rockchip_combphy_ops = {
.init = rockchip_combphy_init,
.exit = rockchip_combphy_exit,
.owner = THIS_MODULE,
@@ -364,7 +364,7 @@ static int rockchip_combphy_probe(struct platform_device *pdev)
return ret;
}
- priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops);
+ priv->phy = devm_phy_create(dev, NULL, &rockchip_combphy_ops);
if (IS_ERR(priv->phy)) {
dev_err(dev, "failed to create combphy\n");
return PTR_ERR(priv->phy);
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
index 9857ee45b8..4e8ffd1730 100644
--- a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -35,11 +35,17 @@
#define RK3588_PCIE3PHY_GRF_CMN_CON0 0x0
#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1 0x904
#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1 0xa04
+#define RK3588_PCIE3PHY_GRF_PHY0_LN0_CON1 0x1004
+#define RK3588_PCIE3PHY_GRF_PHY0_LN1_CON1 0x1104
+#define RK3588_PCIE3PHY_GRF_PHY1_LN0_CON1 0x2004
+#define RK3588_PCIE3PHY_GRF_PHY1_LN1_CON1 0x2104
#define RK3588_SRAM_INIT_DONE(reg) (reg & BIT(0))
#define RK3588_BIFURCATION_LANE_0_1 BIT(0)
#define RK3588_BIFURCATION_LANE_2_3 BIT(1)
#define RK3588_LANE_AGGREGATION BIT(2)
+#define RK3588_RX_CMN_REFCLK_MODE_EN ((BIT(7) << 16) | BIT(7))
+#define RK3588_RX_CMN_REFCLK_MODE_DIS (BIT(7) << 16)
#define RK3588_PCIE1LN_SEL_EN (GENMASK(1, 0) << 16)
#define RK3588_PCIE30_PHY_MODE_EN (GENMASK(2, 0) << 16)
@@ -60,6 +66,7 @@ struct rockchip_p3phy_priv {
int num_clks;
int num_lanes;
u32 lanes[4];
+ u32 rx_cmn_refclk_mode[4];
};
struct rockchip_p3phy_ops {
@@ -137,6 +144,19 @@ static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
u8 mode = RK3588_LANE_AGGREGATION; /* default */
int ret;
+ regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_PHY0_LN0_CON1,
+ priv->rx_cmn_refclk_mode[0] ? RK3588_RX_CMN_REFCLK_MODE_EN :
+ RK3588_RX_CMN_REFCLK_MODE_DIS);
+ regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_PHY0_LN1_CON1,
+ priv->rx_cmn_refclk_mode[1] ? RK3588_RX_CMN_REFCLK_MODE_EN :
+ RK3588_RX_CMN_REFCLK_MODE_DIS);
+ regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_PHY1_LN0_CON1,
+ priv->rx_cmn_refclk_mode[2] ? RK3588_RX_CMN_REFCLK_MODE_EN :
+ RK3588_RX_CMN_REFCLK_MODE_DIS);
+ regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_PHY1_LN1_CON1,
+ priv->rx_cmn_refclk_mode[3] ? RK3588_RX_CMN_REFCLK_MODE_EN :
+ RK3588_RX_CMN_REFCLK_MODE_DIS);
+
/* Deassert PCIe PMA output clamp mode */
regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
@@ -182,7 +202,7 @@ static const struct rockchip_p3phy_ops rk3588_ops = {
.phy_init = rockchip_p3phy_rk3588_init,
};
-static int rochchip_p3phy_init(struct phy *phy)
+static int rockchip_p3phy_init(struct phy *phy)
{
struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
int ret;
@@ -205,7 +225,7 @@ static int rochchip_p3phy_init(struct phy *phy)
return ret;
}
-static int rochchip_p3phy_exit(struct phy *phy)
+static int rockchip_p3phy_exit(struct phy *phy)
{
struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
@@ -214,9 +234,9 @@ static int rochchip_p3phy_exit(struct phy *phy)
return 0;
}
-static const struct phy_ops rochchip_p3phy_ops = {
- .init = rochchip_p3phy_init,
- .exit = rochchip_p3phy_exit,
+static const struct phy_ops rockchip_p3phy_ops = {
+ .init = rockchip_p3phy_init,
+ .exit = rockchip_p3phy_exit,
.set_mode = rockchip_p3phy_set_mode,
.owner = THIS_MODULE,
};
@@ -275,7 +295,24 @@ static int rockchip_p3phy_probe(struct platform_device *pdev)
return priv->num_lanes;
}
- priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
+ ret = of_property_read_variable_u32_array(dev->of_node,
+ "rockchip,rx-common-refclk-mode",
+ priv->rx_cmn_refclk_mode, 1,
+ ARRAY_SIZE(priv->rx_cmn_refclk_mode));
+ /*
+ * if no rockchip,rx-common-refclk-mode, assume enabled for all lanes in
+ * order to be DT backwards compatible. (Since HW reset val is enabled.)
+ */
+ if (ret == -EINVAL) {
+ for (int i = 0; i < ARRAY_SIZE(priv->rx_cmn_refclk_mode); i++)
+ priv->rx_cmn_refclk_mode[i] = 1;
+ } else if (ret < 0) {
+ dev_err(dev, "failed to read rockchip,rx-common-refclk-mode property %d\n",
+ ret);
+ return ret;
+ }
+
+ priv->phy = devm_phy_create(dev, NULL, &rockchip_p3phy_ops);
if (IS_ERR(priv->phy)) {
dev_err(dev, "failed to create combphy\n");
return PTR_ERR(priv->phy);
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
new file mode 100644
index 0000000000..2c51e5c62d
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -0,0 +1,1608 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Rockchip USBDP Combo PHY with Samsung IP block driver
+ *
+ * Copyright (C) 2021-2024 Rockchip Electronics Co., Ltd
+ * Copyright (C) 2024 Collabora Ltd
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+
+/* USBDP PHY Register Definitions */
+#define UDPHY_PCS 0x4000
+#define UDPHY_PMA 0x8000
+
+/* VO0 GRF Registers */
+#define DP_SINK_HPD_CFG BIT(11)
+#define DP_SINK_HPD_SEL BIT(10)
+#define DP_AUX_DIN_SEL BIT(9)
+#define DP_AUX_DOUT_SEL BIT(8)
+#define DP_LANE_SEL_N(n) GENMASK(2 * (n) + 1, 2 * (n))
+#define DP_LANE_SEL_ALL GENMASK(7, 0)
+
+/* PMA CMN Registers */
+#define CMN_LANE_MUX_AND_EN_OFFSET 0x0288 /* cmn_reg00A2 */
+#define CMN_DP_LANE_MUX_N(n) BIT((n) + 4)
+#define CMN_DP_LANE_EN_N(n) BIT(n)
+#define CMN_DP_LANE_MUX_ALL GENMASK(7, 4)
+#define CMN_DP_LANE_EN_ALL GENMASK(3, 0)
+
+#define CMN_DP_LINK_OFFSET 0x28c /* cmn_reg00A3 */
+#define CMN_DP_TX_LINK_BW GENMASK(6, 5)
+#define CMN_DP_TX_LANE_SWAP_EN BIT(2)
+
+#define CMN_SSC_EN_OFFSET 0x2d0 /* cmn_reg00B4 */
+#define CMN_ROPLL_SSC_EN BIT(1)
+#define CMN_LCPLL_SSC_EN BIT(0)
+
+#define CMN_ANA_LCPLL_DONE_OFFSET 0x0350 /* cmn_reg00D4 */
+#define CMN_ANA_LCPLL_LOCK_DONE BIT(7)
+#define CMN_ANA_LCPLL_AFC_DONE BIT(6)
+
+#define CMN_ANA_ROPLL_DONE_OFFSET 0x0354 /* cmn_reg00D5 */
+#define CMN_ANA_ROPLL_LOCK_DONE BIT(1)
+#define CMN_ANA_ROPLL_AFC_DONE BIT(0)
+
+#define CMN_DP_RSTN_OFFSET 0x038c /* cmn_reg00E3 */
+#define CMN_DP_INIT_RSTN BIT(3)
+#define CMN_DP_CMN_RSTN BIT(2)
+#define CMN_CDR_WTCHDG_EN BIT(1)
+#define CMN_CDR_WTCHDG_MSK_CDR_EN BIT(0)
+
+#define TRSV_ANA_TX_CLK_OFFSET_N(n) (0x854 + (n) * 0x800) /* trsv_reg0215 */
+#define LN_ANA_TX_SER_TXCLK_INV BIT(1)
+
+#define TRSV_LN0_MON_RX_CDR_DONE_OFFSET 0x0b84 /* trsv_reg02E1 */
+#define TRSV_LN0_MON_RX_CDR_LOCK_DONE BIT(0)
+
+#define TRSV_LN2_MON_RX_CDR_DONE_OFFSET 0x1b84 /* trsv_reg06E1 */
+#define TRSV_LN2_MON_RX_CDR_LOCK_DONE BIT(0)
+
+#define BIT_WRITEABLE_SHIFT 16
+#define PHY_AUX_DP_DATA_POL_NORMAL 0
+#define PHY_AUX_DP_DATA_POL_INVERT 1
+#define PHY_LANE_MUX_USB 0
+#define PHY_LANE_MUX_DP 1
+
+enum {
+ DP_BW_RBR,
+ DP_BW_HBR,
+ DP_BW_HBR2,
+ DP_BW_HBR3,
+};
+
+enum {
+ UDPHY_MODE_NONE = 0,
+ UDPHY_MODE_USB = BIT(0),
+ UDPHY_MODE_DP = BIT(1),
+ UDPHY_MODE_DP_USB = BIT(1) | BIT(0),
+};
+
+struct rk_udphy_grf_reg {
+ unsigned int offset;
+ unsigned int disable;
+ unsigned int enable;
+};
+
+#define _RK_UDPHY_GEN_GRF_REG(offset, mask, disable, enable) \
+{\
+ offset, \
+ FIELD_PREP_CONST(mask, disable) | (mask << BIT_WRITEABLE_SHIFT), \
+ FIELD_PREP_CONST(mask, enable) | (mask << BIT_WRITEABLE_SHIFT), \
+}
+
+#define RK_UDPHY_GEN_GRF_REG(offset, bitend, bitstart, disable, enable) \
+ _RK_UDPHY_GEN_GRF_REG(offset, GENMASK(bitend, bitstart), disable, enable)
+
+struct rk_udphy_grf_cfg {
+ /* u2phy-grf */
+ struct rk_udphy_grf_reg bvalid_phy_con;
+ struct rk_udphy_grf_reg bvalid_grf_con;
+
+ /* usb-grf */
+ struct rk_udphy_grf_reg usb3otg0_cfg;
+ struct rk_udphy_grf_reg usb3otg1_cfg;
+
+ /* usbdpphy-grf */
+ struct rk_udphy_grf_reg low_pwrn;
+ struct rk_udphy_grf_reg rx_lfps;
+};
+
+struct rk_udphy_vogrf_cfg {
+ /* vo-grf */
+ struct rk_udphy_grf_reg hpd_trigger;
+ u32 dp_lane_reg;
+};
+
+struct rk_udphy_dp_tx_drv_ctrl {
+ u32 trsv_reg0204;
+ u32 trsv_reg0205;
+ u32 trsv_reg0206;
+ u32 trsv_reg0207;
+};
+
+struct rk_udphy_cfg {
+ unsigned int num_phys;
+ unsigned int phy_ids[2];
+ /* resets to be requested */
+ const char * const *rst_list;
+ int num_rsts;
+
+ struct rk_udphy_grf_cfg grfcfg;
+ struct rk_udphy_vogrf_cfg vogrfcfg[2];
+ const struct rk_udphy_dp_tx_drv_ctrl (*dp_tx_ctrl_cfg[4])[4];
+ const struct rk_udphy_dp_tx_drv_ctrl (*dp_tx_ctrl_cfg_typec[4])[4];
+};
+
+struct rk_udphy {
+ struct device *dev;
+ struct regmap *pma_regmap;
+ struct regmap *u2phygrf;
+ struct regmap *udphygrf;
+ struct regmap *usbgrf;
+ struct regmap *vogrf;
+ struct typec_switch_dev *sw;
+ struct typec_mux_dev *mux;
+ struct mutex mutex; /* mutex to protect access to individual PHYs */
+
+ /* clocks and rests */
+ int num_clks;
+ struct clk_bulk_data *clks;
+ struct clk *refclk;
+ int num_rsts;
+ struct reset_control_bulk_data *rsts;
+
+ /* PHY status management */
+ bool flip;
+ bool mode_change;
+ u8 mode;
+ u8 status;
+
+ /* utilized for USB */
+ bool hs; /* flag for high-speed */
+
+ /* utilized for DP */
+ struct gpio_desc *sbu1_dc_gpio;
+ struct gpio_desc *sbu2_dc_gpio;
+ u32 lane_mux_sel[4];
+ u32 dp_lane_sel[4];
+ u32 dp_aux_dout_sel;
+ u32 dp_aux_din_sel;
+ bool dp_sink_hpd_sel;
+ bool dp_sink_hpd_cfg;
+ u8 bw;
+ int id;
+
+ bool dp_in_use;
+
+ /* PHY const config */
+ const struct rk_udphy_cfg *cfgs;
+
+ /* PHY devices */
+ struct phy *phy_dp;
+ struct phy *phy_u3;
+};
+
+static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_rbr_hbr[4][4] = {
+ /* voltage swing 0, pre-emphasis 0->3 */
+ {
+ { 0x20, 0x10, 0x42, 0xe5 },
+ { 0x26, 0x14, 0x42, 0xe5 },
+ { 0x29, 0x18, 0x42, 0xe5 },
+ { 0x2b, 0x1c, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 1, pre-emphasis 0->2 */
+ {
+ { 0x23, 0x10, 0x42, 0xe7 },
+ { 0x2a, 0x17, 0x43, 0xe7 },
+ { 0x2b, 0x1a, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 2, pre-emphasis 0->1 */
+ {
+ { 0x27, 0x10, 0x42, 0xe7 },
+ { 0x2b, 0x17, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 3, pre-emphasis 0 */
+ {
+ { 0x29, 0x10, 0x43, 0xe7 },
+ },
+};
+
+static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_rbr_hbr_typec[4][4] = {
+ /* voltage swing 0, pre-emphasis 0->3 */
+ {
+ { 0x20, 0x10, 0x42, 0xe5 },
+ { 0x26, 0x14, 0x42, 0xe5 },
+ { 0x29, 0x18, 0x42, 0xe5 },
+ { 0x2b, 0x1c, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 1, pre-emphasis 0->2 */
+ {
+ { 0x23, 0x10, 0x42, 0xe7 },
+ { 0x2a, 0x17, 0x43, 0xe7 },
+ { 0x2b, 0x1a, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 2, pre-emphasis 0->1 */
+ {
+ { 0x27, 0x10, 0x43, 0x67 },
+ { 0x2b, 0x17, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 3, pre-emphasis 0 */
+ {
+ { 0x29, 0x10, 0x43, 0xe7 },
+ },
+};
+
+static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_hbr2[4][4] = {
+ /* voltage swing 0, pre-emphasis 0->3 */
+ {
+ { 0x21, 0x10, 0x42, 0xe5 },
+ { 0x26, 0x14, 0x42, 0xe5 },
+ { 0x26, 0x16, 0x43, 0xe5 },
+ { 0x2a, 0x19, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 1, pre-emphasis 0->2 */
+ {
+ { 0x24, 0x10, 0x42, 0xe7 },
+ { 0x2a, 0x17, 0x43, 0xe7 },
+ { 0x2b, 0x1a, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 2, pre-emphasis 0->1 */
+ {
+ { 0x28, 0x10, 0x42, 0xe7 },
+ { 0x2b, 0x17, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 3, pre-emphasis 0 */
+ {
+ { 0x28, 0x10, 0x43, 0xe7 },
+ },
+};
+
+static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_hbr3[4][4] = {
+ /* voltage swing 0, pre-emphasis 0->3 */
+ {
+ { 0x21, 0x10, 0x42, 0xe5 },
+ { 0x26, 0x14, 0x42, 0xe5 },
+ { 0x26, 0x16, 0x43, 0xe5 },
+ { 0x29, 0x18, 0x43, 0xe7 },
+ },
+
+ /* voltage swing 1, pre-emphasis 0->2 */
+ {
+ { 0x24, 0x10, 0x42, 0xe7 },
+ { 0x2a, 0x18, 0x43, 0xe7 },
+ { 0x2b, 0x1b, 0x43, 0xe7 }
+ },
+
+ /* voltage swing 2, pre-emphasis 0->1 */
+ {
+ { 0x27, 0x10, 0x42, 0xe7 },
+ { 0x2b, 0x18, 0x43, 0xe7 }
+ },
+
+ /* voltage swing 3, pre-emphasis 0 */
+ {
+ { 0x28, 0x10, 0x43, 0xe7 },
+ },
+};
+
+static const struct reg_sequence rk_udphy_24m_refclk_cfg[] = {
+ {0x0090, 0x68}, {0x0094, 0x68},
+ {0x0128, 0x24}, {0x012c, 0x44},
+ {0x0130, 0x3f}, {0x0134, 0x44},
+ {0x015c, 0xa9}, {0x0160, 0x71},
+ {0x0164, 0x71}, {0x0168, 0xa9},
+ {0x0174, 0xa9}, {0x0178, 0x71},
+ {0x017c, 0x71}, {0x0180, 0xa9},
+ {0x018c, 0x41}, {0x0190, 0x00},
+ {0x0194, 0x05}, {0x01ac, 0x2a},
+ {0x01b0, 0x17}, {0x01b4, 0x17},
+ {0x01b8, 0x2a}, {0x01c8, 0x04},
+ {0x01cc, 0x08}, {0x01d0, 0x08},
+ {0x01d4, 0x04}, {0x01d8, 0x20},
+ {0x01dc, 0x01}, {0x01e0, 0x09},
+ {0x01e4, 0x03}, {0x01f0, 0x29},
+ {0x01f4, 0x02}, {0x01f8, 0x02},
+ {0x01fc, 0x29}, {0x0208, 0x2a},
+ {0x020c, 0x17}, {0x0210, 0x17},
+ {0x0214, 0x2a}, {0x0224, 0x20},
+ {0x03f0, 0x0a}, {0x03f4, 0x07},
+ {0x03f8, 0x07}, {0x03fc, 0x0c},
+ {0x0404, 0x12}, {0x0408, 0x1a},
+ {0x040c, 0x1a}, {0x0410, 0x3f},
+ {0x0ce0, 0x68}, {0x0ce8, 0xd0},
+ {0x0cf0, 0x87}, {0x0cf8, 0x70},
+ {0x0d00, 0x70}, {0x0d08, 0xa9},
+ {0x1ce0, 0x68}, {0x1ce8, 0xd0},
+ {0x1cf0, 0x87}, {0x1cf8, 0x70},
+ {0x1d00, 0x70}, {0x1d08, 0xa9},
+ {0x0a3c, 0xd0}, {0x0a44, 0xd0},
+ {0x0a48, 0x01}, {0x0a4c, 0x0d},
+ {0x0a54, 0xe0}, {0x0a5c, 0xe0},
+ {0x0a64, 0xa8}, {0x1a3c, 0xd0},
+ {0x1a44, 0xd0}, {0x1a48, 0x01},
+ {0x1a4c, 0x0d}, {0x1a54, 0xe0},
+ {0x1a5c, 0xe0}, {0x1a64, 0xa8}
+};
+
+static const struct reg_sequence rk_udphy_26m_refclk_cfg[] = {
+ {0x0830, 0x07}, {0x085c, 0x80},
+ {0x1030, 0x07}, {0x105c, 0x80},
+ {0x1830, 0x07}, {0x185c, 0x80},
+ {0x2030, 0x07}, {0x205c, 0x80},
+ {0x0228, 0x38}, {0x0104, 0x44},
+ {0x0248, 0x44}, {0x038c, 0x02},
+ {0x0878, 0x04}, {0x1878, 0x04},
+ {0x0898, 0x77}, {0x1898, 0x77},
+ {0x0054, 0x01}, {0x00e0, 0x38},
+ {0x0060, 0x24}, {0x0064, 0x77},
+ {0x0070, 0x76}, {0x0234, 0xe8},
+ {0x0af4, 0x15}, {0x1af4, 0x15},
+ {0x081c, 0xe5}, {0x181c, 0xe5},
+ {0x099c, 0x48}, {0x199c, 0x48},
+ {0x09a4, 0x07}, {0x09a8, 0x22},
+ {0x19a4, 0x07}, {0x19a8, 0x22},
+ {0x09b8, 0x3e}, {0x19b8, 0x3e},
+ {0x09e4, 0x02}, {0x19e4, 0x02},
+ {0x0a34, 0x1e}, {0x1a34, 0x1e},
+ {0x0a98, 0x2f}, {0x1a98, 0x2f},
+ {0x0c30, 0x0e}, {0x0c48, 0x06},
+ {0x1c30, 0x0e}, {0x1c48, 0x06},
+ {0x028c, 0x18}, {0x0af0, 0x00},
+ {0x1af0, 0x00}
+};
+
+static const struct reg_sequence rk_udphy_init_sequence[] = {
+ {0x0104, 0x44}, {0x0234, 0xe8},
+ {0x0248, 0x44}, {0x028c, 0x18},
+ {0x081c, 0xe5}, {0x0878, 0x00},
+ {0x0994, 0x1c}, {0x0af0, 0x00},
+ {0x181c, 0xe5}, {0x1878, 0x00},
+ {0x1994, 0x1c}, {0x1af0, 0x00},
+ {0x0428, 0x60}, {0x0d58, 0x33},
+ {0x1d58, 0x33}, {0x0990, 0x74},
+ {0x0d64, 0x17}, {0x08c8, 0x13},
+ {0x1990, 0x74}, {0x1d64, 0x17},
+ {0x18c8, 0x13}, {0x0d90, 0x40},
+ {0x0da8, 0x40}, {0x0dc0, 0x40},
+ {0x0dd8, 0x40}, {0x1d90, 0x40},
+ {0x1da8, 0x40}, {0x1dc0, 0x40},
+ {0x1dd8, 0x40}, {0x03c0, 0x30},
+ {0x03c4, 0x06}, {0x0e10, 0x00},
+ {0x1e10, 0x00}, {0x043c, 0x0f},
+ {0x0d2c, 0xff}, {0x1d2c, 0xff},
+ {0x0d34, 0x0f}, {0x1d34, 0x0f},
+ {0x08fc, 0x2a}, {0x0914, 0x28},
+ {0x0a30, 0x03}, {0x0e38, 0x03},
+ {0x0ecc, 0x27}, {0x0ed0, 0x22},
+ {0x0ed4, 0x26}, {0x18fc, 0x2a},
+ {0x1914, 0x28}, {0x1a30, 0x03},
+ {0x1e38, 0x03}, {0x1ecc, 0x27},
+ {0x1ed0, 0x22}, {0x1ed4, 0x26},
+ {0x0048, 0x0f}, {0x0060, 0x3c},
+ {0x0064, 0xf7}, {0x006c, 0x20},
+ {0x0070, 0x7d}, {0x0074, 0x68},
+ {0x0af4, 0x1a}, {0x1af4, 0x1a},
+ {0x0440, 0x3f}, {0x10d4, 0x08},
+ {0x20d4, 0x08}, {0x00d4, 0x30},
+ {0x0024, 0x6e},
+};
+
+static inline int rk_udphy_grfreg_write(struct regmap *base,
+ const struct rk_udphy_grf_reg *reg, bool en)
+{
+ return regmap_write(base, reg->offset, en ? reg->enable : reg->disable);
+}
+
+static int rk_udphy_clk_init(struct rk_udphy *udphy, struct device *dev)
+{
+ int i;
+
+ udphy->num_clks = devm_clk_bulk_get_all(dev, &udphy->clks);
+ if (udphy->num_clks < 1)
+ return -ENODEV;
+
+ /* used for configure phy reference clock frequency */
+ for (i = 0; i < udphy->num_clks; i++) {
+ if (!strncmp(udphy->clks[i].id, "refclk", 6)) {
+ udphy->refclk = udphy->clks[i].clk;
+ break;
+ }
+ }
+
+ if (!udphy->refclk)
+ return dev_err_probe(udphy->dev, -EINVAL, "no refclk found\n");
+
+ return 0;
+}
+
+static int rk_udphy_reset_assert_all(struct rk_udphy *udphy)
+{
+ return reset_control_bulk_assert(udphy->num_rsts, udphy->rsts);
+}
+
+static int rk_udphy_reset_deassert_all(struct rk_udphy *udphy)
+{
+ return reset_control_bulk_deassert(udphy->num_rsts, udphy->rsts);
+}
+
+static int rk_udphy_reset_deassert(struct rk_udphy *udphy, char *name)
+{
+ struct reset_control_bulk_data *list = udphy->rsts;
+ int idx;
+
+ for (idx = 0; idx < udphy->num_rsts; idx++) {
+ if (!strcmp(list[idx].id, name))
+ return reset_control_deassert(list[idx].rstc);
+ }
+
+ return -EINVAL;
+}
+
+static int rk_udphy_reset_init(struct rk_udphy *udphy, struct device *dev)
+{
+ const struct rk_udphy_cfg *cfg = udphy->cfgs;
+ int idx;
+
+ udphy->num_rsts = cfg->num_rsts;
+ udphy->rsts = devm_kcalloc(dev, udphy->num_rsts,
+ sizeof(*udphy->rsts), GFP_KERNEL);
+ if (!udphy->rsts)
+ return -ENOMEM;
+
+ for (idx = 0; idx < cfg->num_rsts; idx++)
+ udphy->rsts[idx].id = cfg->rst_list[idx];
+
+ return devm_reset_control_bulk_get_exclusive(dev, cfg->num_rsts,
+ udphy->rsts);
+}
+
+static void rk_udphy_u3_port_disable(struct rk_udphy *udphy, u8 disable)
+{
+ const struct rk_udphy_cfg *cfg = udphy->cfgs;
+ const struct rk_udphy_grf_reg *preg;
+
+ preg = udphy->id ? &cfg->grfcfg.usb3otg1_cfg : &cfg->grfcfg.usb3otg0_cfg;
+ rk_udphy_grfreg_write(udphy->usbgrf, preg, disable);
+}
+
+static void rk_udphy_usb_bvalid_enable(struct rk_udphy *udphy, u8 enable)
+{
+ const struct rk_udphy_cfg *cfg = udphy->cfgs;
+
+ rk_udphy_grfreg_write(udphy->u2phygrf, &cfg->grfcfg.bvalid_phy_con, enable);
+ rk_udphy_grfreg_write(udphy->u2phygrf, &cfg->grfcfg.bvalid_grf_con, enable);
+}
+
+/*
+ * In usb/dp combo phy driver, here are 2 ways to mapping lanes.
+ *
+ * 1 Type-C Mapping table (DP_Alt_Mode V1.0b remove ABF pin mapping)
+ * ---------------------------------------------------------------------------
+ * Type-C Pin B11-B10 A2-A3 A11-A10 B2-B3
+ * PHY Pad ln0(tx/rx) ln1(tx) ln2(tx/rx) ln3(tx)
+ * C/E(Normal) dpln3 dpln2 dpln0 dpln1
+ * C/E(Flip ) dpln0 dpln1 dpln3 dpln2
+ * D/F(Normal) usbrx usbtx dpln0 dpln1
+ * D/F(Flip ) dpln0 dpln1 usbrx usbtx
+ * A(Normal ) dpln3 dpln1 dpln2 dpln0
+ * A(Flip ) dpln2 dpln0 dpln3 dpln1
+ * B(Normal ) usbrx usbtx dpln1 dpln0
+ * B(Flip ) dpln1 dpln0 usbrx usbtx
+ * ---------------------------------------------------------------------------
+ *
+ * 2 Mapping the lanes in dtsi
+ * if all 4 lane assignment for dp function, define rockchip,dp-lane-mux = <x x x x>;
+ * sample as follow:
+ * ---------------------------------------------------------------------------
+ * B11-B10 A2-A3 A11-A10 B2-B3
+ * rockchip,dp-lane-mux ln0(tx/rx) ln1(tx) ln2(tx/rx) ln3(tx)
+ * <0 1 2 3> dpln0 dpln1 dpln2 dpln3
+ * <2 3 0 1> dpln2 dpln3 dpln0 dpln1
+ * ---------------------------------------------------------------------------
+ * if 2 lane for dp function, 2 lane for usb function, define rockchip,dp-lane-mux = <x x>;
+ * sample as follow:
+ * ---------------------------------------------------------------------------
+ * B11-B10 A2-A3 A11-A10 B2-B3
+ * rockchip,dp-lane-mux ln0(tx/rx) ln1(tx) ln2(tx/rx) ln3(tx)
+ * <0 1> dpln0 dpln1 usbrx usbtx
+ * <2 3> usbrx usbtx dpln0 dpln1
+ * ---------------------------------------------------------------------------
+ */
+
+static void rk_udphy_dplane_select(struct rk_udphy *udphy)
+{
+ const struct rk_udphy_cfg *cfg = udphy->cfgs;
+ u32 value = 0;
+
+ switch (udphy->mode) {
+ case UDPHY_MODE_DP:
+ value |= 2 << udphy->dp_lane_sel[2] * 2;
+ value |= 3 << udphy->dp_lane_sel[3] * 2;
+ fallthrough;
+
+ case UDPHY_MODE_DP_USB:
+ value |= 0 << udphy->dp_lane_sel[0] * 2;
+ value |= 1 << udphy->dp_lane_sel[1] * 2;
+ break;
+
+ case UDPHY_MODE_USB:
+ break;
+
+ default:
+ break;
+ }
+
+ regmap_write(udphy->vogrf, cfg->vogrfcfg[udphy->id].dp_lane_reg,
+ ((DP_AUX_DIN_SEL | DP_AUX_DOUT_SEL | DP_LANE_SEL_ALL) << 16) |
+ FIELD_PREP(DP_AUX_DIN_SEL, udphy->dp_aux_din_sel) |
+ FIELD_PREP(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel) | value);
+}
+
+static int rk_udphy_dplane_get(struct rk_udphy *udphy)
+{
+ int dp_lanes;
+
+ switch (udphy->mode) {
+ case UDPHY_MODE_DP:
+ dp_lanes = 4;
+ break;
+
+ case UDPHY_MODE_DP_USB:
+ dp_lanes = 2;
+ break;
+
+ case UDPHY_MODE_USB:
+ default:
+ dp_lanes = 0;
+ break;
+ }
+
+ return dp_lanes;
+}
+
+static void rk_udphy_dplane_enable(struct rk_udphy *udphy, int dp_lanes)
+{
+ u32 val = 0;
+ int i;
+
+ for (i = 0; i < dp_lanes; i++)
+ val |= BIT(udphy->dp_lane_sel[i]);
+
+ regmap_update_bits(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET, CMN_DP_LANE_EN_ALL,
+ FIELD_PREP(CMN_DP_LANE_EN_ALL, val));
+
+ if (!dp_lanes)
+ regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET,
+ CMN_DP_CMN_RSTN, FIELD_PREP(CMN_DP_CMN_RSTN, 0x0));
+}
+
+static void rk_udphy_dp_hpd_event_trigger(struct rk_udphy *udphy, bool hpd)
+{
+ const struct rk_udphy_cfg *cfg = udphy->cfgs;
+
+ udphy->dp_sink_hpd_sel = true;
+ udphy->dp_sink_hpd_cfg = hpd;
+
+ if (!udphy->dp_in_use)
+ return;
+
+ rk_udphy_grfreg_write(udphy->vogrf, &cfg->vogrfcfg[udphy->id].hpd_trigger, hpd);
+}
+
+static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
+{
+ if (udphy->flip) {
+ udphy->dp_lane_sel[0] = 0;
+ udphy->dp_lane_sel[1] = 1;
+ udphy->dp_lane_sel[2] = 3;
+ udphy->dp_lane_sel[3] = 2;
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
+ udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_INVERT;
+ udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_INVERT;
+ gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 1);
+ gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 0);
+ } else {
+ udphy->dp_lane_sel[0] = 2;
+ udphy->dp_lane_sel[1] = 3;
+ udphy->dp_lane_sel[2] = 1;
+ udphy->dp_lane_sel[3] = 0;
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+ udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_NORMAL;
+ udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_NORMAL;
+ gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0);
+ gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 1);
+ }
+
+ udphy->mode = UDPHY_MODE_DP_USB;
+}
+
+static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
+ enum typec_orientation orien)
+{
+ struct rk_udphy *udphy = typec_switch_get_drvdata(sw);
+
+ mutex_lock(&udphy->mutex);
+
+ if (orien == TYPEC_ORIENTATION_NONE) {
+ gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0);
+ gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 0);
+ /* unattached */
+ rk_udphy_usb_bvalid_enable(udphy, false);
+ goto unlock_ret;
+ }
+
+ udphy->flip = (orien == TYPEC_ORIENTATION_REVERSE) ? true : false;
+ rk_udphy_set_typec_default_mapping(udphy);
+ rk_udphy_usb_bvalid_enable(udphy, true);
+
+unlock_ret:
+ mutex_unlock(&udphy->mutex);
+ return 0;
+}
+
+static void rk_udphy_orien_switch_unregister(void *data)
+{
+ struct rk_udphy *udphy = data;
+
+ typec_switch_unregister(udphy->sw);
+}
+
+static int rk_udphy_setup_orien_switch(struct rk_udphy *udphy)
+{
+ struct typec_switch_desc sw_desc = { };
+
+ sw_desc.drvdata = udphy;
+ sw_desc.fwnode = dev_fwnode(udphy->dev);
+ sw_desc.set = rk_udphy_orien_sw_set;
+
+ udphy->sw = typec_switch_register(udphy->dev, &sw_desc);
+ if (IS_ERR(udphy->sw)) {
+ dev_err(udphy->dev, "Error register typec orientation switch: %ld\n",
+ PTR_ERR(udphy->sw));
+ return PTR_ERR(udphy->sw);
+ }
+
+ return devm_add_action_or_reset(udphy->dev,
+ rk_udphy_orien_switch_unregister, udphy);
+}
+
+static int rk_udphy_refclk_set(struct rk_udphy *udphy)
+{
+ unsigned long rate;
+ int ret;
+
+ /* configure phy reference clock */
+ rate = clk_get_rate(udphy->refclk);
+ dev_dbg(udphy->dev, "refclk freq %ld\n", rate);
+
+ switch (rate) {
+ case 24000000:
+ ret = regmap_multi_reg_write(udphy->pma_regmap, rk_udphy_24m_refclk_cfg,
+ ARRAY_SIZE(rk_udphy_24m_refclk_cfg));
+ if (ret)
+ return ret;
+ break;
+
+ case 26000000:
+ /* register default is 26MHz */
+ ret = regmap_multi_reg_write(udphy->pma_regmap, rk_udphy_26m_refclk_cfg,
+ ARRAY_SIZE(rk_udphy_26m_refclk_cfg));
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ dev_err(udphy->dev, "unsupported refclk freq %ld\n", rate);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rk_udphy_status_check(struct rk_udphy *udphy)
+{
+ unsigned int val;
+ int ret;
+
+ /* LCPLL check */
+ if (udphy->mode & UDPHY_MODE_USB) {
+ ret = regmap_read_poll_timeout(udphy->pma_regmap, CMN_ANA_LCPLL_DONE_OFFSET,
+ val, (val & CMN_ANA_LCPLL_AFC_DONE) &&
+ (val & CMN_ANA_LCPLL_LOCK_DONE), 200, 100000);
+ if (ret) {
+ dev_err(udphy->dev, "cmn ana lcpll lock timeout\n");
+ /*
+ * If earlier software (U-Boot) enabled USB once already
+ * the PLL may have problems locking on the first try.
+ * It will be successful on the second try, so for the
+ * time being a -EPROBE_DEFER will solve the issue.
+ *
+ * This requires further investigation to understand the
+ * root cause, especially considering that the driver is
+ * asserting all reset lines at probe time.
+ */
+ return -EPROBE_DEFER;
+ }
+
+ if (!udphy->flip) {
+ ret = regmap_read_poll_timeout(udphy->pma_regmap,
+ TRSV_LN0_MON_RX_CDR_DONE_OFFSET, val,
+ val & TRSV_LN0_MON_RX_CDR_LOCK_DONE,
+ 200, 100000);
+ if (ret)
+ dev_err(udphy->dev, "trsv ln0 mon rx cdr lock timeout\n");
+ } else {
+ ret = regmap_read_poll_timeout(udphy->pma_regmap,
+ TRSV_LN2_MON_RX_CDR_DONE_OFFSET, val,
+ val & TRSV_LN2_MON_RX_CDR_LOCK_DONE,
+ 200, 100000);
+ if (ret)
+ dev_err(udphy->dev, "trsv ln2 mon rx cdr lock timeout\n");
+ }
+ }
+
+ return 0;
+}
+
+static int rk_udphy_init(struct rk_udphy *udphy)
+{
+ const struct rk_udphy_cfg *cfg = udphy->cfgs;
+ int ret;
+
+ rk_udphy_reset_assert_all(udphy);
+ usleep_range(10000, 11000);
+
+ /* enable rx lfps for usb */
+ if (udphy->mode & UDPHY_MODE_USB)
+ rk_udphy_grfreg_write(udphy->udphygrf, &cfg->grfcfg.rx_lfps, true);
+
+ /* Step 1: power on pma and deassert apb rstn */
+ rk_udphy_grfreg_write(udphy->udphygrf, &cfg->grfcfg.low_pwrn, true);
+
+ rk_udphy_reset_deassert(udphy, "pma_apb");
+ rk_udphy_reset_deassert(udphy, "pcs_apb");
+
+ /* Step 2: set init sequence and phy refclk */
+ ret = regmap_multi_reg_write(udphy->pma_regmap, rk_udphy_init_sequence,
+ ARRAY_SIZE(rk_udphy_init_sequence));
+ if (ret) {
+ dev_err(udphy->dev, "init sequence set error %d\n", ret);
+ goto assert_resets;
+ }
+
+ ret = rk_udphy_refclk_set(udphy);
+ if (ret) {
+ dev_err(udphy->dev, "refclk set error %d\n", ret);
+ goto assert_resets;
+ }
+
+ /* Step 3: configure lane mux */
+ regmap_update_bits(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET,
+ CMN_DP_LANE_MUX_ALL | CMN_DP_LANE_EN_ALL,
+ FIELD_PREP(CMN_DP_LANE_MUX_N(3), udphy->lane_mux_sel[3]) |
+ FIELD_PREP(CMN_DP_LANE_MUX_N(2), udphy->lane_mux_sel[2]) |
+ FIELD_PREP(CMN_DP_LANE_MUX_N(1), udphy->lane_mux_sel[1]) |
+ FIELD_PREP(CMN_DP_LANE_MUX_N(0), udphy->lane_mux_sel[0]) |
+ FIELD_PREP(CMN_DP_LANE_EN_ALL, 0));
+
+ /* Step 4: deassert init rstn and wait for 200ns from datasheet */
+ if (udphy->mode & UDPHY_MODE_USB)
+ rk_udphy_reset_deassert(udphy, "init");
+
+ if (udphy->mode & UDPHY_MODE_DP) {
+ regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET,
+ CMN_DP_INIT_RSTN,
+ FIELD_PREP(CMN_DP_INIT_RSTN, 0x1));
+ }
+
+ udelay(1);
+
+ /* Step 5: deassert cmn/lane rstn */
+ if (udphy->mode & UDPHY_MODE_USB) {
+ rk_udphy_reset_deassert(udphy, "cmn");
+ rk_udphy_reset_deassert(udphy, "lane");
+ }
+
+ /* Step 6: wait for lock done of pll */
+ ret = rk_udphy_status_check(udphy);
+ if (ret)
+ goto assert_resets;
+
+ return 0;
+
+assert_resets:
+ rk_udphy_reset_assert_all(udphy);
+ return ret;
+}
+
+static int rk_udphy_setup(struct rk_udphy *udphy)
+{
+ int ret;
+
+ ret = clk_bulk_prepare_enable(udphy->num_clks, udphy->clks);
+ if (ret) {
+ dev_err(udphy->dev, "failed to enable clk\n");
+ return ret;
+ }
+
+ ret = rk_udphy_init(udphy);
+ if (ret) {
+ dev_err(udphy->dev, "failed to init combophy\n");
+ clk_bulk_disable_unprepare(udphy->num_clks, udphy->clks);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void rk_udphy_disable(struct rk_udphy *udphy)
+{
+ clk_bulk_disable_unprepare(udphy->num_clks, udphy->clks);
+ rk_udphy_reset_assert_all(udphy);
+}
+
+static int rk_udphy_parse_lane_mux_data(struct rk_udphy *udphy)
+{
+ int ret, i, num_lanes;
+
+ num_lanes = device_property_count_u32(udphy->dev, "rockchip,dp-lane-mux");
+ if (num_lanes < 0) {
+ dev_dbg(udphy->dev, "no dp-lane-mux, following dp alt mode\n");
+ udphy->mode = UDPHY_MODE_USB;
+ return 0;
+ }
+
+ if (num_lanes != 2 && num_lanes != 4)
+ return dev_err_probe(udphy->dev, -EINVAL,
+ "invalid number of lane mux\n");
+
+ ret = device_property_read_u32_array(udphy->dev, "rockchip,dp-lane-mux",
+ udphy->dp_lane_sel, num_lanes);
+ if (ret)
+ return dev_err_probe(udphy->dev, ret, "get dp lane mux failed\n");
+
+ for (i = 0; i < num_lanes; i++) {
+ int j;
+
+ if (udphy->dp_lane_sel[i] > 3)
+ return dev_err_probe(udphy->dev, -EINVAL,
+ "lane mux between 0 and 3, exceeding the range\n");
+
+ udphy->lane_mux_sel[udphy->dp_lane_sel[i]] = PHY_LANE_MUX_DP;
+
+ for (j = i + 1; j < num_lanes; j++) {
+ if (udphy->dp_lane_sel[i] == udphy->dp_lane_sel[j])
+ return dev_err_probe(udphy->dev, -EINVAL,
+ "set repeat lane mux value\n");
+ }
+ }
+
+ udphy->mode = UDPHY_MODE_DP;
+ if (num_lanes == 2) {
+ udphy->mode |= UDPHY_MODE_USB;
+ udphy->flip = (udphy->lane_mux_sel[0] == PHY_LANE_MUX_DP);
+ }
+
+ return 0;
+}
+
+static int rk_udphy_get_initial_status(struct rk_udphy *udphy)
+{
+ int ret;
+ u32 value;
+
+ ret = clk_bulk_prepare_enable(udphy->num_clks, udphy->clks);
+ if (ret) {
+ dev_err(udphy->dev, "failed to enable clk\n");
+ return ret;
+ }
+
+ rk_udphy_reset_deassert_all(udphy);
+
+ regmap_read(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET, &value);
+ if (FIELD_GET(CMN_DP_LANE_MUX_ALL, value) && FIELD_GET(CMN_DP_LANE_EN_ALL, value))
+ udphy->status = UDPHY_MODE_DP;
+ else
+ rk_udphy_disable(udphy);
+
+ return 0;
+}
+
+static int rk_udphy_parse_dt(struct rk_udphy *udphy)
+{
+ struct device *dev = udphy->dev;
+ struct device_node *np = dev_of_node(dev);
+ enum usb_device_speed maximum_speed;
+ int ret;
+
+ udphy->u2phygrf = syscon_regmap_lookup_by_phandle(np, "rockchip,u2phy-grf");
+ if (IS_ERR(udphy->u2phygrf))
+ return dev_err_probe(dev, PTR_ERR(udphy->u2phygrf), "failed to get u2phy-grf\n");
+
+ udphy->udphygrf = syscon_regmap_lookup_by_phandle(np, "rockchip,usbdpphy-grf");
+ if (IS_ERR(udphy->udphygrf))
+ return dev_err_probe(dev, PTR_ERR(udphy->udphygrf), "failed to get usbdpphy-grf\n");
+
+ udphy->usbgrf = syscon_regmap_lookup_by_phandle(np, "rockchip,usb-grf");
+ if (IS_ERR(udphy->usbgrf))
+ return dev_err_probe(dev, PTR_ERR(udphy->usbgrf), "failed to get usb-grf\n");
+
+ udphy->vogrf = syscon_regmap_lookup_by_phandle(np, "rockchip,vo-grf");
+ if (IS_ERR(udphy->vogrf))
+ return dev_err_probe(dev, PTR_ERR(udphy->vogrf), "failed to get vo-grf\n");
+
+ ret = rk_udphy_parse_lane_mux_data(udphy);
+ if (ret)
+ return ret;
+
+ udphy->sbu1_dc_gpio = devm_gpiod_get_optional(dev, "sbu1-dc", GPIOD_OUT_LOW);
+ if (IS_ERR(udphy->sbu1_dc_gpio))
+ return PTR_ERR(udphy->sbu1_dc_gpio);
+
+ udphy->sbu2_dc_gpio = devm_gpiod_get_optional(dev, "sbu2-dc", GPIOD_OUT_LOW);
+ if (IS_ERR(udphy->sbu2_dc_gpio))
+ return PTR_ERR(udphy->sbu2_dc_gpio);
+
+ if (device_property_present(dev, "maximum-speed")) {
+ maximum_speed = usb_get_maximum_speed(dev);
+ udphy->hs = maximum_speed <= USB_SPEED_HIGH ? true : false;
+ }
+
+ ret = rk_udphy_clk_init(udphy, dev);
+ if (ret)
+ return ret;
+
+ return rk_udphy_reset_init(udphy, dev);
+}
+
+static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
+{
+ int ret;
+
+ if (!(udphy->mode & mode)) {
+ dev_info(udphy->dev, "mode 0x%02x is not support\n", mode);
+ return 0;
+ }
+
+ if (udphy->status == UDPHY_MODE_NONE) {
+ udphy->mode_change = false;
+ ret = rk_udphy_setup(udphy);
+ if (ret)
+ return ret;
+
+ if (udphy->mode & UDPHY_MODE_USB)
+ rk_udphy_u3_port_disable(udphy, false);
+ } else if (udphy->mode_change) {
+ udphy->mode_change = false;
+ udphy->status = UDPHY_MODE_NONE;
+ if (udphy->mode == UDPHY_MODE_DP)
+ rk_udphy_u3_port_disable(udphy, true);
+
+ rk_udphy_disable(udphy);
+ ret = rk_udphy_setup(udphy);
+ if (ret)
+ return ret;
+ }
+
+ udphy->status |= mode;
+
+ return 0;
+}
+
+static void rk_udphy_power_off(struct rk_udphy *udphy, u8 mode)
+{
+ if (!(udphy->mode & mode)) {
+ dev_info(udphy->dev, "mode 0x%02x is not support\n", mode);
+ return;
+ }
+
+ if (!udphy->status)
+ return;
+
+ udphy->status &= ~mode;
+
+ if (udphy->status == UDPHY_MODE_NONE)
+ rk_udphy_disable(udphy);
+}
+
+static int rk_udphy_dp_phy_init(struct phy *phy)
+{
+ struct rk_udphy *udphy = phy_get_drvdata(phy);
+
+ mutex_lock(&udphy->mutex);
+
+ udphy->dp_in_use = true;
+ rk_udphy_dp_hpd_event_trigger(udphy, udphy->dp_sink_hpd_cfg);
+
+ mutex_unlock(&udphy->mutex);
+
+ return 0;
+}
+
+static int rk_udphy_dp_phy_exit(struct phy *phy)
+{
+ struct rk_udphy *udphy = phy_get_drvdata(phy);
+
+ mutex_lock(&udphy->mutex);
+ udphy->dp_in_use = false;
+ mutex_unlock(&udphy->mutex);
+ return 0;
+}
+
+static int rk_udphy_dp_phy_power_on(struct phy *phy)
+{
+ struct rk_udphy *udphy = phy_get_drvdata(phy);
+ int ret, dp_lanes;
+
+ mutex_lock(&udphy->mutex);
+
+ dp_lanes = rk_udphy_dplane_get(udphy);
+ phy_set_bus_width(phy, dp_lanes);
+
+ ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP);
+ if (ret)
+ goto unlock;
+
+ rk_udphy_dplane_enable(udphy, dp_lanes);
+
+ rk_udphy_dplane_select(udphy);
+
+unlock:
+ mutex_unlock(&udphy->mutex);
+ /*
+ * If data send by aux channel too fast after phy power on,
+ * the aux may be not ready which will cause aux error. Adding
+ * delay to avoid this issue.
+ */
+ usleep_range(10000, 11000);
+ return ret;
+}
+
+static int rk_udphy_dp_phy_power_off(struct phy *phy)
+{
+ struct rk_udphy *udphy = phy_get_drvdata(phy);
+
+ mutex_lock(&udphy->mutex);
+ rk_udphy_dplane_enable(udphy, 0);
+ rk_udphy_power_off(udphy, UDPHY_MODE_DP);
+ mutex_unlock(&udphy->mutex);
+
+ return 0;
+}
+
+static int rk_udphy_dp_phy_verify_link_rate(unsigned int link_rate)
+{
+ switch (link_rate) {
+ case 1620:
+ case 2700:
+ case 5400:
+ case 8100:
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rk_udphy_dp_phy_verify_config(struct rk_udphy *udphy,
+ struct phy_configure_opts_dp *dp)
+{
+ int i, ret;
+
+ /* If changing link rate was required, verify it's supported. */
+ ret = rk_udphy_dp_phy_verify_link_rate(dp->link_rate);
+ if (ret)
+ return ret;
+
+ /* Verify lane count. */
+ switch (dp->lanes) {
+ case 1:
+ case 2:
+ case 4:
+ /* valid lane count. */
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * If changing voltages is required, check swing and pre-emphasis
+ * levels, per-lane.
+ */
+ if (dp->set_voltages) {
+ /* Lane count verified previously. */
+ for (i = 0; i < dp->lanes; i++) {
+ if (dp->voltage[i] > 3 || dp->pre[i] > 3)
+ return -EINVAL;
+
+ /*
+ * Sum of voltage swing and pre-emphasis levels cannot
+ * exceed 3.
+ */
+ if (dp->voltage[i] + dp->pre[i] > 3)
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void rk_udphy_dp_set_voltage(struct rk_udphy *udphy, u8 bw,
+ u32 voltage, u32 pre, u32 lane)
+{
+ const struct rk_udphy_cfg *cfg = udphy->cfgs;
+ const struct rk_udphy_dp_tx_drv_ctrl (*dp_ctrl)[4];
+ u32 offset = 0x800 * lane;
+ u32 val;
+
+ if (udphy->mux)
+ dp_ctrl = cfg->dp_tx_ctrl_cfg_typec[bw];
+ else
+ dp_ctrl = cfg->dp_tx_ctrl_cfg[bw];
+
+ val = dp_ctrl[voltage][pre].trsv_reg0204;
+ regmap_write(udphy->pma_regmap, 0x0810 + offset, val);
+
+ val = dp_ctrl[voltage][pre].trsv_reg0205;
+ regmap_write(udphy->pma_regmap, 0x0814 + offset, val);
+
+ val = dp_ctrl[voltage][pre].trsv_reg0206;
+ regmap_write(udphy->pma_regmap, 0x0818 + offset, val);
+
+ val = dp_ctrl[voltage][pre].trsv_reg0207;
+ regmap_write(udphy->pma_regmap, 0x081c + offset, val);
+}
+
+static int rk_udphy_dp_phy_configure(struct phy *phy,
+ union phy_configure_opts *opts)
+{
+ struct rk_udphy *udphy = phy_get_drvdata(phy);
+ struct phy_configure_opts_dp *dp = &opts->dp;
+ u32 i, val, lane;
+ int ret;
+
+ ret = rk_udphy_dp_phy_verify_config(udphy, dp);
+ if (ret)
+ return ret;
+
+ if (dp->set_rate) {
+ regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET,
+ CMN_DP_CMN_RSTN, FIELD_PREP(CMN_DP_CMN_RSTN, 0x0));
+
+ switch (dp->link_rate) {
+ case 1620:
+ udphy->bw = DP_BW_RBR;
+ break;
+
+ case 2700:
+ udphy->bw = DP_BW_HBR;
+ break;
+
+ case 5400:
+ udphy->bw = DP_BW_HBR2;
+ break;
+
+ case 8100:
+ udphy->bw = DP_BW_HBR3;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(udphy->pma_regmap, CMN_DP_LINK_OFFSET, CMN_DP_TX_LINK_BW,
+ FIELD_PREP(CMN_DP_TX_LINK_BW, udphy->bw));
+ regmap_update_bits(udphy->pma_regmap, CMN_SSC_EN_OFFSET, CMN_ROPLL_SSC_EN,
+ FIELD_PREP(CMN_ROPLL_SSC_EN, dp->ssc));
+ regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET, CMN_DP_CMN_RSTN,
+ FIELD_PREP(CMN_DP_CMN_RSTN, 0x1));
+
+ ret = regmap_read_poll_timeout(udphy->pma_regmap, CMN_ANA_ROPLL_DONE_OFFSET, val,
+ FIELD_GET(CMN_ANA_ROPLL_LOCK_DONE, val) &&
+ FIELD_GET(CMN_ANA_ROPLL_AFC_DONE, val),
+ 0, 1000);
+ if (ret) {
+ dev_err(udphy->dev, "ROPLL is not lock, set_rate failed\n");
+ return ret;
+ }
+ }
+
+ if (dp->set_voltages) {
+ for (i = 0; i < dp->lanes; i++) {
+ lane = udphy->dp_lane_sel[i];
+ switch (dp->link_rate) {
+ case 1620:
+ case 2700:
+ regmap_update_bits(udphy->pma_regmap,
+ TRSV_ANA_TX_CLK_OFFSET_N(lane),
+ LN_ANA_TX_SER_TXCLK_INV,
+ FIELD_PREP(LN_ANA_TX_SER_TXCLK_INV,
+ udphy->lane_mux_sel[lane]));
+ break;
+
+ case 5400:
+ case 8100:
+ regmap_update_bits(udphy->pma_regmap,
+ TRSV_ANA_TX_CLK_OFFSET_N(lane),
+ LN_ANA_TX_SER_TXCLK_INV,
+ FIELD_PREP(LN_ANA_TX_SER_TXCLK_INV, 0x0));
+ break;
+ }
+
+ rk_udphy_dp_set_voltage(udphy, udphy->bw, dp->voltage[i],
+ dp->pre[i], lane);
+ }
+ }
+
+ return 0;
+}
+
+static const struct phy_ops rk_udphy_dp_phy_ops = {
+ .init = rk_udphy_dp_phy_init,
+ .exit = rk_udphy_dp_phy_exit,
+ .power_on = rk_udphy_dp_phy_power_on,
+ .power_off = rk_udphy_dp_phy_power_off,
+ .configure = rk_udphy_dp_phy_configure,
+ .owner = THIS_MODULE,
+};
+
+static int rk_udphy_usb3_phy_init(struct phy *phy)
+{
+ struct rk_udphy *udphy = phy_get_drvdata(phy);
+ int ret = 0;
+
+ mutex_lock(&udphy->mutex);
+ /* DP only or high-speed, disable U3 port */
+ if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs) {
+ rk_udphy_u3_port_disable(udphy, true);
+ goto unlock;
+ }
+
+ ret = rk_udphy_power_on(udphy, UDPHY_MODE_USB);
+
+unlock:
+ mutex_unlock(&udphy->mutex);
+ return ret;
+}
+
+static int rk_udphy_usb3_phy_exit(struct phy *phy)
+{
+ struct rk_udphy *udphy = phy_get_drvdata(phy);
+
+ mutex_lock(&udphy->mutex);
+ /* DP only or high-speed */
+ if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs)
+ goto unlock;
+
+ rk_udphy_power_off(udphy, UDPHY_MODE_USB);
+
+unlock:
+ mutex_unlock(&udphy->mutex);
+ return 0;
+}
+
+static const struct phy_ops rk_udphy_usb3_phy_ops = {
+ .init = rk_udphy_usb3_phy_init,
+ .exit = rk_udphy_usb3_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
+ struct typec_mux_state *state)
+{
+ struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
+ u8 mode;
+
+ mutex_lock(&udphy->mutex);
+
+ switch (state->mode) {
+ case TYPEC_DP_STATE_C:
+ case TYPEC_DP_STATE_E:
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+ mode = UDPHY_MODE_DP;
+ break;
+
+ case TYPEC_DP_STATE_D:
+ default:
+ if (udphy->flip) {
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
+ } else {
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+ }
+ mode = UDPHY_MODE_DP_USB;
+ break;
+ }
+
+ if (state->alt && state->alt->svid == USB_TYPEC_DP_SID) {
+ struct typec_displayport_data *data = state->data;
+
+ if (!data) {
+ rk_udphy_dp_hpd_event_trigger(udphy, false);
+ } else if (data->status & DP_STATUS_IRQ_HPD) {
+ rk_udphy_dp_hpd_event_trigger(udphy, false);
+ usleep_range(750, 800);
+ rk_udphy_dp_hpd_event_trigger(udphy, true);
+ } else if (data->status & DP_STATUS_HPD_STATE) {
+ if (udphy->mode != mode) {
+ udphy->mode = mode;
+ udphy->mode_change = true;
+ }
+ rk_udphy_dp_hpd_event_trigger(udphy, true);
+ } else {
+ rk_udphy_dp_hpd_event_trigger(udphy, false);
+ }
+ }
+
+ mutex_unlock(&udphy->mutex);
+ return 0;
+}
+
+static void rk_udphy_typec_mux_unregister(void *data)
+{
+ struct rk_udphy *udphy = data;
+
+ typec_mux_unregister(udphy->mux);
+}
+
+static int rk_udphy_setup_typec_mux(struct rk_udphy *udphy)
+{
+ struct typec_mux_desc mux_desc = {};
+
+ mux_desc.drvdata = udphy;
+ mux_desc.fwnode = dev_fwnode(udphy->dev);
+ mux_desc.set = rk_udphy_typec_mux_set;
+
+ udphy->mux = typec_mux_register(udphy->dev, &mux_desc);
+ if (IS_ERR(udphy->mux)) {
+ dev_err(udphy->dev, "Error register typec mux: %ld\n",
+ PTR_ERR(udphy->mux));
+ return PTR_ERR(udphy->mux);
+ }
+
+ return devm_add_action_or_reset(udphy->dev, rk_udphy_typec_mux_unregister,
+ udphy);
+}
+
+static const struct regmap_config rk_udphy_pma_regmap_cfg = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .fast_io = true,
+ .max_register = 0x20dc,
+};
+
+static struct phy *rk_udphy_phy_xlate(struct device *dev, const struct of_phandle_args *args)
+{
+ struct rk_udphy *udphy = dev_get_drvdata(dev);
+
+ if (args->args_count == 0)
+ return ERR_PTR(-EINVAL);
+
+ switch (args->args[0]) {
+ case PHY_TYPE_USB3:
+ return udphy->phy_u3;
+ case PHY_TYPE_DP:
+ return udphy->phy_dp;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int rk_udphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ struct rk_udphy *udphy;
+ void __iomem *base;
+ int id, ret;
+
+ udphy = devm_kzalloc(dev, sizeof(*udphy), GFP_KERNEL);
+ if (!udphy)
+ return -ENOMEM;
+
+ udphy->cfgs = device_get_match_data(dev);
+ if (!udphy->cfgs)
+ return dev_err_probe(dev, -EINVAL, "missing match data\n");
+
+ base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ /* find the phy-id from the io address */
+ udphy->id = -ENODEV;
+ for (id = 0; id < udphy->cfgs->num_phys; id++) {
+ if (res->start == udphy->cfgs->phy_ids[id]) {
+ udphy->id = id;
+ break;
+ }
+ }
+
+ if (udphy->id < 0)
+ return dev_err_probe(dev, -ENODEV, "no matching device found\n");
+
+ udphy->pma_regmap = devm_regmap_init_mmio(dev, base + UDPHY_PMA,
+ &rk_udphy_pma_regmap_cfg);
+ if (IS_ERR(udphy->pma_regmap))
+ return PTR_ERR(udphy->pma_regmap);
+
+ udphy->dev = dev;
+ ret = rk_udphy_parse_dt(udphy);
+ if (ret)
+ return ret;
+
+ ret = rk_udphy_get_initial_status(udphy);
+ if (ret)
+ return ret;
+
+ mutex_init(&udphy->mutex);
+ platform_set_drvdata(pdev, udphy);
+
+ if (device_property_present(dev, "orientation-switch")) {
+ ret = rk_udphy_setup_orien_switch(udphy);
+ if (ret)
+ return ret;
+ }
+
+ if (device_property_present(dev, "mode-switch")) {
+ ret = rk_udphy_setup_typec_mux(udphy);
+ if (ret)
+ return ret;
+ }
+
+ udphy->phy_u3 = devm_phy_create(dev, dev->of_node, &rk_udphy_usb3_phy_ops);
+ if (IS_ERR(udphy->phy_u3)) {
+ ret = PTR_ERR(udphy->phy_u3);
+ return dev_err_probe(dev, ret, "failed to create USB3 phy\n");
+ }
+ phy_set_drvdata(udphy->phy_u3, udphy);
+
+ udphy->phy_dp = devm_phy_create(dev, dev->of_node, &rk_udphy_dp_phy_ops);
+ if (IS_ERR(udphy->phy_dp)) {
+ ret = PTR_ERR(udphy->phy_dp);
+ return dev_err_probe(dev, ret, "failed to create DP phy\n");
+ }
+ phy_set_bus_width(udphy->phy_dp, rk_udphy_dplane_get(udphy));
+ udphy->phy_dp->attrs.max_link_rate = 8100;
+ phy_set_drvdata(udphy->phy_dp, udphy);
+
+ phy_provider = devm_of_phy_provider_register(dev, rk_udphy_phy_xlate);
+ if (IS_ERR(phy_provider)) {
+ ret = PTR_ERR(phy_provider);
+ return dev_err_probe(dev, ret, "failed to register phy provider\n");
+ }
+
+ return 0;
+}
+
+static int __maybe_unused rk_udphy_resume(struct device *dev)
+{
+ struct rk_udphy *udphy = dev_get_drvdata(dev);
+
+ if (udphy->dp_sink_hpd_sel)
+ rk_udphy_dp_hpd_event_trigger(udphy, udphy->dp_sink_hpd_cfg);
+
+ return 0;
+}
+
+static const struct dev_pm_ops rk_udphy_pm_ops = {
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, rk_udphy_resume)
+};
+
+static const char * const rk_udphy_rst_list[] = {
+ "init", "cmn", "lane", "pcs_apb", "pma_apb"
+};
+
+static const struct rk_udphy_cfg rk3588_udphy_cfgs = {
+ .num_phys = 2,
+ .phy_ids = {
+ 0xfed80000,
+ 0xfed90000,
+ },
+ .num_rsts = ARRAY_SIZE(rk_udphy_rst_list),
+ .rst_list = rk_udphy_rst_list,
+ .grfcfg = {
+ /* u2phy-grf */
+ .bvalid_phy_con = RK_UDPHY_GEN_GRF_REG(0x0008, 1, 0, 0x2, 0x3),
+ .bvalid_grf_con = RK_UDPHY_GEN_GRF_REG(0x0010, 3, 2, 0x2, 0x3),
+
+ /* usb-grf */
+ .usb3otg0_cfg = RK_UDPHY_GEN_GRF_REG(0x001c, 15, 0, 0x1100, 0x0188),
+ .usb3otg1_cfg = RK_UDPHY_GEN_GRF_REG(0x0034, 15, 0, 0x1100, 0x0188),
+
+ /* usbdpphy-grf */
+ .low_pwrn = RK_UDPHY_GEN_GRF_REG(0x0004, 13, 13, 0, 1),
+ .rx_lfps = RK_UDPHY_GEN_GRF_REG(0x0004, 14, 14, 0, 1),
+ },
+ .vogrfcfg = {
+ {
+ .hpd_trigger = RK_UDPHY_GEN_GRF_REG(0x0000, 11, 10, 1, 3),
+ .dp_lane_reg = 0x0000,
+ },
+ {
+ .hpd_trigger = RK_UDPHY_GEN_GRF_REG(0x0008, 11, 10, 1, 3),
+ .dp_lane_reg = 0x0008,
+ },
+ },
+ .dp_tx_ctrl_cfg = {
+ rk3588_dp_tx_drv_ctrl_rbr_hbr,
+ rk3588_dp_tx_drv_ctrl_rbr_hbr,
+ rk3588_dp_tx_drv_ctrl_hbr2,
+ rk3588_dp_tx_drv_ctrl_hbr3,
+ },
+ .dp_tx_ctrl_cfg_typec = {
+ rk3588_dp_tx_drv_ctrl_rbr_hbr_typec,
+ rk3588_dp_tx_drv_ctrl_rbr_hbr_typec,
+ rk3588_dp_tx_drv_ctrl_hbr2,
+ rk3588_dp_tx_drv_ctrl_hbr3,
+ },
+};
+
+static const struct of_device_id rk_udphy_dt_match[] = {
+ {
+ .compatible = "rockchip,rk3588-usbdp-phy",
+ .data = &rk3588_udphy_cfgs
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rk_udphy_dt_match);
+
+static struct platform_driver rk_udphy_driver = {
+ .probe = rk_udphy_probe,
+ .driver = {
+ .name = "rockchip-usbdp-phy",
+ .of_match_table = rk_udphy_dt_match,
+ .pm = &rk_udphy_pm_ops,
+ },
+};
+module_platform_driver(rk_udphy_driver);
+
+MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
+MODULE_AUTHOR("Zhang Yubing <yubing.zhang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USBDP Combo PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
index afb34a153e..fea1f96d0e 100644
--- a/drivers/phy/samsung/Makefile
+++ b/drivers/phy/samsung/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
obj-$(CONFIG_PHY_SAMSUNG_UFS) += phy-exynos-ufs.o
+phy-exynos-ufs-y += phy-gs101-ufs.o
phy-exynos-ufs-y += phy-samsung-ufs.o
phy-exynos-ufs-y += phy-exynos7-ufs.o
phy-exynos-ufs-y += phy-exynosautov9-ufs.o
diff --git a/drivers/phy/samsung/phy-exynos7-ufs.c b/drivers/phy/samsung/phy-exynos7-ufs.c
index a982e7c128..15eec1d9e0 100644
--- a/drivers/phy/samsung/phy-exynos7-ufs.c
+++ b/drivers/phy/samsung/phy-exynos7-ufs.c
@@ -82,4 +82,5 @@ const struct samsung_ufs_phy_drvdata exynos7_ufs_phy = {
.clk_list = exynos7_ufs_phy_clks,
.num_clks = ARRAY_SIZE(exynos7_ufs_phy_clks),
.cdr_lock_status_offset = EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+ .wait_for_cdr = samsung_ufs_phy_wait_for_lock_acq,
};
diff --git a/drivers/phy/samsung/phy-exynosautov9-ufs.c b/drivers/phy/samsung/phy-exynosautov9-ufs.c
index 49e2bcbef0..9c3e030f07 100644
--- a/drivers/phy/samsung/phy-exynosautov9-ufs.c
+++ b/drivers/phy/samsung/phy-exynosautov9-ufs.c
@@ -71,4 +71,5 @@ const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy = {
.clk_list = exynosautov9_ufs_phy_clks,
.num_clks = ARRAY_SIZE(exynosautov9_ufs_phy_clks),
.cdr_lock_status_offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+ .wait_for_cdr = samsung_ufs_phy_wait_for_lock_acq,
};
diff --git a/drivers/phy/samsung/phy-fsd-ufs.c b/drivers/phy/samsung/phy-fsd-ufs.c
index d36cabd534..f2361746db 100644
--- a/drivers/phy/samsung/phy-fsd-ufs.c
+++ b/drivers/phy/samsung/phy-fsd-ufs.c
@@ -60,4 +60,5 @@ const struct samsung_ufs_phy_drvdata fsd_ufs_phy = {
.clk_list = fsd_ufs_phy_clks,
.num_clks = ARRAY_SIZE(fsd_ufs_phy_clks),
.cdr_lock_status_offset = FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+ .wait_for_cdr = samsung_ufs_phy_wait_for_lock_acq,
};
diff --git a/drivers/phy/samsung/phy-gs101-ufs.c b/drivers/phy/samsung/phy-gs101-ufs.c
new file mode 100644
index 0000000000..17b798da5b
--- /dev/null
+++ b/drivers/phy/samsung/phy-gs101-ufs.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver data for Google Tensor gs101 SoC
+ *
+ * Copyright (C) 2024 Linaro Ltd
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ */
+
+#include "phy-samsung-ufs.h"
+
+#define TENSOR_GS101_PHY_CTRL 0x3ec8
+#define TENSOR_GS101_PHY_CTRL_MASK 0x1
+#define TENSOR_GS101_PHY_CTRL_EN BIT(0)
+#define PHY_GS101_LANE_OFFSET 0x200
+#define TRSV_REG338 0x338
+#define LN0_MON_RX_CAL_DONE BIT(3)
+#define TRSV_REG339 0x339
+#define LN0_MON_RX_CDR_FLD_CK_MODE_DONE BIT(3)
+#define TRSV_REG222 0x222
+#define LN0_OVRD_RX_CDR_EN BIT(4)
+#define LN0_RX_CDR_EN BIT(3)
+
+#define PHY_PMA_TRSV_ADDR(reg, lane) (PHY_APB_ADDR((reg) + \
+ ((lane) * PHY_GS101_LANE_OFFSET)))
+
+#define PHY_TRSV_REG_CFG_GS101(o, v, d) \
+ PHY_TRSV_REG_CFG_OFFSET(o, v, d, PHY_GS101_LANE_OFFSET)
+
+/* Calibration for phy initialization */
+static const struct samsung_ufs_phy_cfg tensor_gs101_pre_init_cfg[] = {
+ PHY_COMN_REG_CFG(0x43, 0x10, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x3C, 0x14, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x46, 0x48, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x200, 0x00, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x201, 0x06, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x202, 0x06, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x203, 0x0a, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x204, 0x00, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x205, 0x11, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x207, 0x0c, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2E1, 0xc0, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x22D, 0xb8, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x234, 0x60, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x238, 0x13, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x239, 0x48, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x23A, 0x01, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x23B, 0x25, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x23C, 0x2a, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x23D, 0x01, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x23E, 0x13, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x23F, 0x13, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x240, 0x4a, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x243, 0x40, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x244, 0x02, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x25D, 0x00, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x25E, 0x3f, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x25F, 0xff, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x273, 0x33, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x274, 0x50, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x284, 0x02, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x285, 0x02, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2A2, 0x04, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x25D, 0x01, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2FA, 0x01, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x286, 0x03, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x287, 0x03, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x288, 0x03, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x289, 0x03, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2B3, 0x04, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2B6, 0x0b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2B7, 0x0b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2B8, 0x0b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2B9, 0x0b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2BA, 0x0b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2BB, 0x06, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2BC, 0x06, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2BD, 0x06, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x29E, 0x06, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2E4, 0x1a, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2ED, 0x25, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x269, 0x1a, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x2F4, 0x2f, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x34B, 0x01, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x34C, 0x23, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x34D, 0x23, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x34E, 0x45, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x34F, 0x00, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x350, 0x31, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x351, 0x00, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x352, 0x02, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x353, 0x00, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x354, 0x01, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x43, 0x18, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x43, 0x00, PWR_MODE_ANY),
+ END_UFS_PHY_CFG,
+};
+
+static const struct samsung_ufs_phy_cfg tensor_gs101_pre_pwr_hs_config[] = {
+ PHY_TRSV_REG_CFG_GS101(0x369, 0x11, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x246, 0x03, PWR_MODE_ANY),
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg tensor_gs101_post_pwr_hs_config[] = {
+ PHY_COMN_REG_CFG(0x8, 0x60, PWR_MODE_PWM_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x222, 0x08, PWR_MODE_PWM_ANY),
+ PHY_TRSV_REG_CFG_GS101(0x246, 0x01, PWR_MODE_ANY),
+ END_UFS_PHY_CFG,
+};
+
+static const struct samsung_ufs_phy_cfg *tensor_gs101_ufs_phy_cfgs[CFG_TAG_MAX] = {
+ [CFG_PRE_INIT] = tensor_gs101_pre_init_cfg,
+ [CFG_PRE_PWR_HS] = tensor_gs101_pre_pwr_hs_config,
+ [CFG_POST_PWR_HS] = tensor_gs101_post_pwr_hs_config,
+};
+
+static const char * const tensor_gs101_ufs_phy_clks[] = {
+ "ref_clk",
+};
+
+static int gs101_phy_wait_for_calibration(struct phy *phy, u8 lane)
+{
+ struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+ const unsigned int timeout_us = 40000;
+ const unsigned int sleep_us = 40;
+ u32 val;
+ u32 off;
+ int err;
+
+ off = PHY_PMA_TRSV_ADDR(TRSV_REG338, lane);
+
+ err = readl_poll_timeout(ufs_phy->reg_pma + off,
+ val, (val & LN0_MON_RX_CAL_DONE),
+ sleep_us, timeout_us);
+
+ if (err) {
+ dev_err(ufs_phy->dev,
+ "failed to get phy cal done %d\n", err);
+ }
+
+ return err;
+}
+
+#define DELAY_IN_US 40
+#define RETRY_CNT 100
+static int gs101_phy_wait_for_cdr_lock(struct phy *phy, u8 lane)
+{
+ struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+ u32 val;
+ int i;
+
+ for (i = 0; i < RETRY_CNT; i++) {
+ udelay(DELAY_IN_US);
+ val = readl(ufs_phy->reg_pma +
+ PHY_PMA_TRSV_ADDR(TRSV_REG339, lane));
+
+ if (val & LN0_MON_RX_CDR_FLD_CK_MODE_DONE)
+ return 0;
+
+ udelay(DELAY_IN_US);
+ /* Override and enable clock data recovery */
+ writel(LN0_OVRD_RX_CDR_EN, ufs_phy->reg_pma +
+ PHY_PMA_TRSV_ADDR(TRSV_REG222, lane));
+ writel(LN0_OVRD_RX_CDR_EN | LN0_RX_CDR_EN,
+ ufs_phy->reg_pma + PHY_PMA_TRSV_ADDR(TRSV_REG222, lane));
+ }
+ dev_err(ufs_phy->dev, "failed to get cdr lock\n");
+ return -ETIMEDOUT;
+}
+
+const struct samsung_ufs_phy_drvdata tensor_gs101_ufs_phy = {
+ .cfgs = tensor_gs101_ufs_phy_cfgs,
+ .isol = {
+ .offset = TENSOR_GS101_PHY_CTRL,
+ .mask = TENSOR_GS101_PHY_CTRL_MASK,
+ .en = TENSOR_GS101_PHY_CTRL_EN,
+ },
+ .clk_list = tensor_gs101_ufs_phy_clks,
+ .num_clks = ARRAY_SIZE(tensor_gs101_ufs_phy_clks),
+ .wait_for_cal = gs101_phy_wait_for_calibration,
+ .wait_for_cdr = gs101_phy_wait_for_cdr_lock,
+};
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
index 183c88e3d1..6c5d415526 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.c
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -13,11 +13,11 @@
#include <linux/of.h>
#include <linux/io.h>
#include <linux/iopoll.h>
-#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-pmu.h>
#include "phy-samsung-ufs.h"
@@ -45,7 +45,7 @@ static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
}
}
-static int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy)
+int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy, u8 lane)
{
struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
const unsigned int timeout_us = 100000;
@@ -97,8 +97,21 @@ static int samsung_ufs_phy_calibrate(struct phy *phy)
}
}
- if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
- err = samsung_ufs_phy_wait_for_lock_acq(phy);
+ for_each_phy_lane(ufs_phy, i) {
+ if (ufs_phy->ufs_phy_state == CFG_PRE_INIT &&
+ ufs_phy->drvdata->wait_for_cal) {
+ err = ufs_phy->drvdata->wait_for_cal(phy, i);
+ if (err)
+ goto out;
+ }
+
+ if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS &&
+ ufs_phy->drvdata->wait_for_cdr) {
+ err = ufs_phy->drvdata->wait_for_cdr(phy, i);
+ if (err)
+ goto out;
+ }
+ }
/**
* In Samsung ufshci, PHY need to be calibrated at different
@@ -255,8 +268,8 @@ static int samsung_ufs_phy_probe(struct platform_device *pdev)
goto out;
}
- phy->reg_pmu = syscon_regmap_lookup_by_phandle(
- dev->of_node, "samsung,pmu-syscon");
+ phy->reg_pmu = exynos_get_pmu_regmap_by_phandle(dev->of_node,
+ "samsung,pmu-syscon");
if (IS_ERR(phy->reg_pmu)) {
err = PTR_ERR(phy->reg_pmu);
dev_err(dev, "failed syscon remap for pmu\n");
@@ -302,6 +315,9 @@ out:
static const struct of_device_id samsung_ufs_phy_match[] = {
{
+ .compatible = "google,gs101-ufs-phy",
+ .data = &tensor_gs101_ufs_phy,
+ }, {
.compatible = "samsung,exynos7-ufs-phy",
.data = &exynos7_ufs_phy,
}, {
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
index e122960cfe..9b7deef6e1 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.h
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -112,6 +112,9 @@ struct samsung_ufs_phy_drvdata {
const char * const *clk_list;
int num_clks;
u32 cdr_lock_status_offset;
+ /* SoC's specific operations */
+ int (*wait_for_cal)(struct phy *phy, u8 lane);
+ int (*wait_for_cdr)(struct phy *phy, u8 lane);
};
struct samsung_ufs_phy {
@@ -139,8 +142,11 @@ static inline void samsung_ufs_phy_ctrl_isol(
phy->isol.mask, isol ? 0 : phy->isol.en);
}
+int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy, u8 lane);
+
extern const struct samsung_ufs_phy_drvdata exynos7_ufs_phy;
extern const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy;
extern const struct samsung_ufs_phy_drvdata fsd_ufs_phy;
+extern const struct samsung_ufs_phy_drvdata tensor_gs101_ufs_phy;
#endif /* _PHY_SAMSUNG_UFS_ */
diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index f72c5257d7..f2bff7f25f 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -80,7 +80,8 @@
/* Reference clock selection parameters */
#define L0_Ln_REF_CLK_SEL(n) (0x2860 + (n) * 4)
-#define L0_REF_CLK_SEL_MASK 0x8f
+#define L0_REF_CLK_LCL_SEL BIT(7)
+#define L0_REF_CLK_SEL_MASK 0x9f
/* Calibration digital logic parameters */
#define L3_TM_CALIB_DIG19 0xec4c
@@ -349,11 +350,12 @@ static void xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy)
PLL_FREQ_MASK, ssc->pll_ref_clk);
/* Enable lane clock sharing, if required */
- if (gtr_phy->refclk != gtr_phy->lane) {
- /* Lane3 Ref Clock Selection Register */
+ if (gtr_phy->refclk == gtr_phy->lane)
+ xpsgtr_clr_set(gtr_phy->dev, L0_Ln_REF_CLK_SEL(gtr_phy->lane),
+ L0_REF_CLK_SEL_MASK, L0_REF_CLK_LCL_SEL);
+ else
xpsgtr_clr_set(gtr_phy->dev, L0_Ln_REF_CLK_SEL(gtr_phy->lane),
L0_REF_CLK_SEL_MASK, 1 << gtr_phy->refclk);
- }
/* SSC step size [7:0] */
xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_0_LSB,
@@ -573,7 +575,7 @@ static int xpsgtr_phy_init(struct phy *phy)
mutex_lock(&gtr_dev->gtr_mutex);
/* Configure and enable the clock when peripheral phy_init call */
- if (clk_prepare_enable(gtr_dev->clk[gtr_phy->lane]))
+ if (clk_prepare_enable(gtr_dev->clk[gtr_phy->refclk]))
goto out;
/* Skip initialization if not required. */
@@ -625,7 +627,7 @@ static int xpsgtr_phy_exit(struct phy *phy)
gtr_phy->skip_phy_init = false;
/* Ensure that disable clock only, which configure for lane */
- clk_disable_unprepare(gtr_dev->clk[gtr_phy->lane]);
+ clk_disable_unprepare(gtr_dev->clk[gtr_phy->refclk]);
return 0;
}
@@ -995,15 +997,13 @@ static int xpsgtr_probe(struct platform_device *pdev)
return 0;
}
-static int xpsgtr_remove(struct platform_device *pdev)
+static void xpsgtr_remove(struct platform_device *pdev)
{
struct xpsgtr_dev *gtr_dev = platform_get_drvdata(pdev);
pm_runtime_disable(gtr_dev->dev);
pm_runtime_put_noidle(gtr_dev->dev);
pm_runtime_set_suspended(gtr_dev->dev);
-
- return 0;
}
static const struct of_device_id xpsgtr_of_match[] = {
@@ -1015,7 +1015,7 @@ MODULE_DEVICE_TABLE(of, xpsgtr_of_match);
static struct platform_driver xpsgtr_driver = {
.probe = xpsgtr_probe,
- .remove = xpsgtr_remove,
+ .remove_new = xpsgtr_remove,
.driver = {
.name = "xilinx-psgtr",
.of_match_table = xpsgtr_of_match,