diff options
Diffstat (limited to 'drivers/platform/surface/aggregator/core.c')
-rw-r--r-- | drivers/platform/surface/aggregator/core.c | 836 |
1 files changed, 836 insertions, 0 deletions
diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c new file mode 100644 index 0000000000..6152be3839 --- /dev/null +++ b/drivers/platform/surface/aggregator/core.c @@ -0,0 +1,836 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Surface Serial Hub (SSH) driver for communication with the Surface/System + * Aggregator Module (SSAM/SAM). + * + * Provides access to a SAM-over-SSH connected EC via a controller device. + * Handles communication via requests as well as enabling, disabling, and + * relaying of events. + * + * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com> + */ + +#include <linux/acpi.h> +#include <linux/atomic.h> +#include <linux/completion.h> +#include <linux/gpio/consumer.h> +#include <linux/kernel.h> +#include <linux/kref.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/serdev.h> +#include <linux/sysfs.h> + +#include <linux/surface_aggregator/controller.h> +#include <linux/surface_aggregator/device.h> + +#include "bus.h" +#include "controller.h" + +#define CREATE_TRACE_POINTS +#include "trace.h" + + +/* -- Static controller reference. ------------------------------------------ */ + +/* + * Main controller reference. The corresponding lock must be held while + * accessing (reading/writing) the reference. + */ +static struct ssam_controller *__ssam_controller; +static DEFINE_SPINLOCK(__ssam_controller_lock); + +/** + * ssam_get_controller() - Get reference to SSAM controller. + * + * Returns a reference to the SSAM controller of the system or %NULL if there + * is none, it hasn't been set up yet, or it has already been unregistered. + * This function automatically increments the reference count of the + * controller, thus the calling party must ensure that ssam_controller_put() + * is called when it doesn't need the controller any more. + */ +struct ssam_controller *ssam_get_controller(void) +{ + struct ssam_controller *ctrl; + + spin_lock(&__ssam_controller_lock); + + ctrl = __ssam_controller; + if (!ctrl) + goto out; + + if (WARN_ON(!kref_get_unless_zero(&ctrl->kref))) + ctrl = NULL; + +out: + spin_unlock(&__ssam_controller_lock); + return ctrl; +} +EXPORT_SYMBOL_GPL(ssam_get_controller); + +/** + * ssam_try_set_controller() - Try to set the main controller reference. + * @ctrl: The controller to which the reference should point. + * + * Set the main controller reference to the given pointer if the reference + * hasn't been set already. + * + * Return: Returns zero on success or %-EEXIST if the reference has already + * been set. + */ +static int ssam_try_set_controller(struct ssam_controller *ctrl) +{ + int status = 0; + + spin_lock(&__ssam_controller_lock); + if (!__ssam_controller) + __ssam_controller = ctrl; + else + status = -EEXIST; + spin_unlock(&__ssam_controller_lock); + + return status; +} + +/** + * ssam_clear_controller() - Remove/clear the main controller reference. + * + * Clears the main controller reference, i.e. sets it to %NULL. This function + * should be called before the controller is shut down. + */ +static void ssam_clear_controller(void) +{ + spin_lock(&__ssam_controller_lock); + __ssam_controller = NULL; + spin_unlock(&__ssam_controller_lock); +} + +/** + * ssam_client_link() - Link an arbitrary client device to the controller. + * @c: The controller to link to. + * @client: The client device. + * + * Link an arbitrary client device to the controller by creating a device link + * between it as consumer and the controller device as provider. This function + * can be used for non-SSAM devices (or SSAM devices not registered as child + * under the controller) to guarantee that the controller is valid for as long + * as the driver of the client device is bound, and that proper suspend and + * resume ordering is guaranteed. + * + * The device link does not have to be destructed manually. It is removed + * automatically once the driver of the client device unbinds. + * + * Return: Returns zero on success, %-ENODEV if the controller is not ready or + * going to be removed soon, or %-ENOMEM if the device link could not be + * created for other reasons. + */ +int ssam_client_link(struct ssam_controller *c, struct device *client) +{ + const u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE_CONSUMER; + struct device_link *link; + struct device *ctrldev; + + ssam_controller_statelock(c); + + if (c->state != SSAM_CONTROLLER_STARTED) { + ssam_controller_stateunlock(c); + return -ENODEV; + } + + ctrldev = ssam_controller_device(c); + if (!ctrldev) { + ssam_controller_stateunlock(c); + return -ENODEV; + } + + link = device_link_add(client, ctrldev, flags); + if (!link) { + ssam_controller_stateunlock(c); + return -ENOMEM; + } + + /* + * Return -ENODEV if supplier driver is on its way to be removed. In + * this case, the controller won't be around for much longer and the + * device link is not going to save us any more, as unbinding is + * already in progress. + */ + if (READ_ONCE(link->status) == DL_STATE_SUPPLIER_UNBIND) { + ssam_controller_stateunlock(c); + return -ENODEV; + } + + ssam_controller_stateunlock(c); + return 0; +} +EXPORT_SYMBOL_GPL(ssam_client_link); + +/** + * ssam_client_bind() - Bind an arbitrary client device to the controller. + * @client: The client device. + * + * Link an arbitrary client device to the controller by creating a device link + * between it as consumer and the main controller device as provider. This + * function can be used for non-SSAM devices to guarantee that the controller + * returned by this function is valid for as long as the driver of the client + * device is bound, and that proper suspend and resume ordering is guaranteed. + * + * This function does essentially the same as ssam_client_link(), except that + * it first fetches the main controller reference, then creates the link, and + * finally returns this reference. Note that this function does not increment + * the reference counter of the controller, as, due to the link, the + * controller lifetime is assured as long as the driver of the client device + * is bound. + * + * It is not valid to use the controller reference obtained by this method + * outside of the driver bound to the client device at the time of calling + * this function, without first incrementing the reference count of the + * controller via ssam_controller_get(). Even after doing this, care must be + * taken that requests are only submitted and notifiers are only + * (un-)registered when the controller is active and not suspended. In other + * words: The device link only lives as long as the client driver is bound and + * any guarantees enforced by this link (e.g. active controller state) can + * only be relied upon as long as this link exists and may need to be enforced + * in other ways afterwards. + * + * The created device link does not have to be destructed manually. It is + * removed automatically once the driver of the client device unbinds. + * + * Return: Returns the controller on success, an error pointer with %-ENODEV + * if the controller is not present, not ready or going to be removed soon, or + * %-ENOMEM if the device link could not be created for other reasons. + */ +struct ssam_controller *ssam_client_bind(struct device *client) +{ + struct ssam_controller *c; + int status; + + c = ssam_get_controller(); + if (!c) + return ERR_PTR(-ENODEV); + + status = ssam_client_link(c, client); + + /* + * Note that we can drop our controller reference in both success and + * failure cases: On success, we have bound the controller lifetime + * inherently to the client driver lifetime, i.e. it the controller is + * now guaranteed to outlive the client driver. On failure, we're not + * going to use the controller any more. + */ + ssam_controller_put(c); + + return status >= 0 ? c : ERR_PTR(status); +} +EXPORT_SYMBOL_GPL(ssam_client_bind); + + +/* -- Glue layer (serdev_device -> ssam_controller). ------------------------ */ + +static int ssam_receive_buf(struct serdev_device *dev, const unsigned char *buf, + size_t n) +{ + struct ssam_controller *ctrl; + int ret; + + ctrl = serdev_device_get_drvdata(dev); + ret = ssam_controller_receive_buf(ctrl, buf, n); + + return ret < 0 ? 0 : ret; +} + +static void ssam_write_wakeup(struct serdev_device *dev) +{ + ssam_controller_write_wakeup(serdev_device_get_drvdata(dev)); +} + +static const struct serdev_device_ops ssam_serdev_ops = { + .receive_buf = ssam_receive_buf, + .write_wakeup = ssam_write_wakeup, +}; + + +/* -- SysFS and misc. ------------------------------------------------------- */ + +static int ssam_log_firmware_version(struct ssam_controller *ctrl) +{ + u32 version, a, b, c; + int status; + + status = ssam_get_firmware_version(ctrl, &version); + if (status) + return status; + + a = (version >> 24) & 0xff; + b = ((version >> 8) & 0xffff); + c = version & 0xff; + + ssam_info(ctrl, "SAM firmware version: %u.%u.%u\n", a, b, c); + return 0; +} + +static ssize_t firmware_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ssam_controller *ctrl = dev_get_drvdata(dev); + u32 version, a, b, c; + int status; + + status = ssam_get_firmware_version(ctrl, &version); + if (status < 0) + return status; + + a = (version >> 24) & 0xff; + b = ((version >> 8) & 0xffff); + c = version & 0xff; + + return sysfs_emit(buf, "%u.%u.%u\n", a, b, c); +} +static DEVICE_ATTR_RO(firmware_version); + +static struct attribute *ssam_sam_attrs[] = { + &dev_attr_firmware_version.attr, + NULL +}; + +static const struct attribute_group ssam_sam_group = { + .name = "sam", + .attrs = ssam_sam_attrs, +}; + + +/* -- ACPI based device setup. ---------------------------------------------- */ + +static acpi_status ssam_serdev_setup_via_acpi_crs(struct acpi_resource *rsc, + void *ctx) +{ + struct serdev_device *serdev = ctx; + struct acpi_resource_uart_serialbus *uart; + bool flow_control; + int status = 0; + + if (!serdev_acpi_get_uart_resource(rsc, &uart)) + return AE_OK; + + /* Set up serdev device. */ + serdev_device_set_baudrate(serdev, uart->default_baud_rate); + + /* serdev currently only supports RTSCTS flow control. */ + if (uart->flow_control & (~((u8)ACPI_UART_FLOW_CONTROL_HW))) { + dev_warn(&serdev->dev, "setup: unsupported flow control (value: %#04x)\n", + uart->flow_control); + } + + /* Set RTSCTS flow control. */ + flow_control = uart->flow_control & ACPI_UART_FLOW_CONTROL_HW; + serdev_device_set_flow_control(serdev, flow_control); + + /* serdev currently only supports EVEN/ODD parity. */ + switch (uart->parity) { + case ACPI_UART_PARITY_NONE: + status = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + break; + case ACPI_UART_PARITY_EVEN: + status = serdev_device_set_parity(serdev, SERDEV_PARITY_EVEN); + break; + case ACPI_UART_PARITY_ODD: + status = serdev_device_set_parity(serdev, SERDEV_PARITY_ODD); + break; + default: + dev_warn(&serdev->dev, "setup: unsupported parity (value: %#04x)\n", + uart->parity); + break; + } + + if (status) { + dev_err(&serdev->dev, "setup: failed to set parity (value: %#04x, error: %d)\n", + uart->parity, status); + return AE_ERROR; + } + + /* We've found the resource and are done. */ + return AE_CTRL_TERMINATE; +} + +static acpi_status ssam_serdev_setup_via_acpi(acpi_handle handle, + struct serdev_device *serdev) +{ + return acpi_walk_resources(handle, METHOD_NAME__CRS, + ssam_serdev_setup_via_acpi_crs, serdev); +} + + +/* -- Power management. ----------------------------------------------------- */ + +static void ssam_serial_hub_shutdown(struct device *dev) +{ + struct ssam_controller *c = dev_get_drvdata(dev); + int status; + + /* + * Try to disable notifiers, signal display-off and D0-exit, ignore any + * errors. + * + * Note: It has not been established yet if this is actually + * necessary/useful for shutdown. + */ + + status = ssam_notifier_disable_registered(c); + if (status) { + ssam_err(c, "pm: failed to disable notifiers for shutdown: %d\n", + status); + } + + status = ssam_ctrl_notif_display_off(c); + if (status) + ssam_err(c, "pm: display-off notification failed: %d\n", status); + + status = ssam_ctrl_notif_d0_exit(c); + if (status) + ssam_err(c, "pm: D0-exit notification failed: %d\n", status); +} + +#ifdef CONFIG_PM_SLEEP + +static int ssam_serial_hub_pm_prepare(struct device *dev) +{ + struct ssam_controller *c = dev_get_drvdata(dev); + int status; + + /* + * Try to signal display-off, This will quiesce events. + * + * Note: Signaling display-off/display-on should normally be done from + * some sort of display state notifier. As that is not available, + * signal it here. + */ + + status = ssam_ctrl_notif_display_off(c); + if (status) + ssam_err(c, "pm: display-off notification failed: %d\n", status); + + return status; +} + +static void ssam_serial_hub_pm_complete(struct device *dev) +{ + struct ssam_controller *c = dev_get_drvdata(dev); + int status; + + /* + * Try to signal display-on. This will restore events. + * + * Note: Signaling display-off/display-on should normally be done from + * some sort of display state notifier. As that is not available, + * signal it here. + */ + + status = ssam_ctrl_notif_display_on(c); + if (status) + ssam_err(c, "pm: display-on notification failed: %d\n", status); +} + +static int ssam_serial_hub_pm_suspend(struct device *dev) +{ + struct ssam_controller *c = dev_get_drvdata(dev); + int status; + + /* + * Try to signal D0-exit, enable IRQ wakeup if specified. Abort on + * error. + */ + + status = ssam_ctrl_notif_d0_exit(c); + if (status) { + ssam_err(c, "pm: D0-exit notification failed: %d\n", status); + goto err_notif; + } + + status = ssam_irq_arm_for_wakeup(c); + if (status) + goto err_irq; + + WARN_ON(ssam_controller_suspend(c)); + return 0; + +err_irq: + ssam_ctrl_notif_d0_entry(c); +err_notif: + ssam_ctrl_notif_display_on(c); + return status; +} + +static int ssam_serial_hub_pm_resume(struct device *dev) +{ + struct ssam_controller *c = dev_get_drvdata(dev); + int status; + + WARN_ON(ssam_controller_resume(c)); + + /* + * Try to disable IRQ wakeup (if specified) and signal D0-entry. In + * case of errors, log them and try to restore normal operation state + * as far as possible. + * + * Note: Signaling display-off/display-on should normally be done from + * some sort of display state notifier. As that is not available, + * signal it here. + */ + + ssam_irq_disarm_wakeup(c); + + status = ssam_ctrl_notif_d0_entry(c); + if (status) + ssam_err(c, "pm: D0-entry notification failed: %d\n", status); + + return 0; +} + +static int ssam_serial_hub_pm_freeze(struct device *dev) +{ + struct ssam_controller *c = dev_get_drvdata(dev); + int status; + + /* + * During hibernation image creation, we only have to ensure that the + * EC doesn't send us any events. This is done via the display-off + * and D0-exit notifications. Note that this sets up the wakeup IRQ + * on the EC side, however, we have disabled it by default on our side + * and won't enable it here. + * + * See ssam_serial_hub_poweroff() for more details on the hibernation + * process. + */ + + status = ssam_ctrl_notif_d0_exit(c); + if (status) { + ssam_err(c, "pm: D0-exit notification failed: %d\n", status); + ssam_ctrl_notif_display_on(c); + return status; + } + + WARN_ON(ssam_controller_suspend(c)); + return 0; +} + +static int ssam_serial_hub_pm_thaw(struct device *dev) +{ + struct ssam_controller *c = dev_get_drvdata(dev); + int status; + + WARN_ON(ssam_controller_resume(c)); + + status = ssam_ctrl_notif_d0_entry(c); + if (status) + ssam_err(c, "pm: D0-exit notification failed: %d\n", status); + + return status; +} + +static int ssam_serial_hub_pm_poweroff(struct device *dev) +{ + struct ssam_controller *c = dev_get_drvdata(dev); + int status; + + /* + * When entering hibernation and powering off the system, the EC, at + * least on some models, may disable events. Without us taking care of + * that, this leads to events not being enabled/restored when the + * system resumes from hibernation, resulting SAM-HID subsystem devices + * (i.e. keyboard, touchpad) not working, AC-plug/AC-unplug events being + * gone, etc. + * + * To avoid these issues, we disable all registered events here (this is + * likely not actually required) and restore them during the drivers PM + * restore callback. + * + * Wakeup from the EC interrupt is not supported during hibernation, + * so don't arm the IRQ here. + */ + + status = ssam_notifier_disable_registered(c); + if (status) { + ssam_err(c, "pm: failed to disable notifiers for hibernation: %d\n", + status); + return status; + } + + status = ssam_ctrl_notif_d0_exit(c); + if (status) { + ssam_err(c, "pm: D0-exit notification failed: %d\n", status); + ssam_notifier_restore_registered(c); + return status; + } + + WARN_ON(ssam_controller_suspend(c)); + return 0; +} + +static int ssam_serial_hub_pm_restore(struct device *dev) +{ + struct ssam_controller *c = dev_get_drvdata(dev); + int status; + + /* + * Ignore but log errors, try to restore state as much as possible in + * case of failures. See ssam_serial_hub_poweroff() for more details on + * the hibernation process. + */ + + WARN_ON(ssam_controller_resume(c)); + + status = ssam_ctrl_notif_d0_entry(c); + if (status) + ssam_err(c, "pm: D0-entry notification failed: %d\n", status); + + ssam_notifier_restore_registered(c); + return 0; +} + +static const struct dev_pm_ops ssam_serial_hub_pm_ops = { + .prepare = ssam_serial_hub_pm_prepare, + .complete = ssam_serial_hub_pm_complete, + .suspend = ssam_serial_hub_pm_suspend, + .resume = ssam_serial_hub_pm_resume, + .freeze = ssam_serial_hub_pm_freeze, + .thaw = ssam_serial_hub_pm_thaw, + .poweroff = ssam_serial_hub_pm_poweroff, + .restore = ssam_serial_hub_pm_restore, +}; + +#else /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops ssam_serial_hub_pm_ops = { }; + +#endif /* CONFIG_PM_SLEEP */ + + +/* -- Device/driver setup. -------------------------------------------------- */ + +static const struct acpi_gpio_params gpio_ssam_wakeup_int = { 0, 0, false }; +static const struct acpi_gpio_params gpio_ssam_wakeup = { 1, 0, false }; + +static const struct acpi_gpio_mapping ssam_acpi_gpios[] = { + { "ssam_wakeup-int-gpio", &gpio_ssam_wakeup_int, 1 }, + { "ssam_wakeup-gpio", &gpio_ssam_wakeup, 1 }, + { }, +}; + +static int ssam_serial_hub_probe(struct serdev_device *serdev) +{ + struct acpi_device *ssh = ACPI_COMPANION(&serdev->dev); + struct ssam_controller *ctrl; + acpi_status astatus; + int status; + + if (gpiod_count(&serdev->dev, NULL) < 0) + return -ENODEV; + + status = devm_acpi_dev_add_driver_gpios(&serdev->dev, ssam_acpi_gpios); + if (status) + return status; + + /* Allocate controller. */ + ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + + /* Initialize controller. */ + status = ssam_controller_init(ctrl, serdev); + if (status) + goto err_ctrl_init; + + ssam_controller_lock(ctrl); + + /* Set up serdev device. */ + serdev_device_set_drvdata(serdev, ctrl); + serdev_device_set_client_ops(serdev, &ssam_serdev_ops); + status = serdev_device_open(serdev); + if (status) + goto err_devopen; + + astatus = ssam_serdev_setup_via_acpi(ssh->handle, serdev); + if (ACPI_FAILURE(astatus)) { + status = -ENXIO; + goto err_devinit; + } + + /* Start controller. */ + status = ssam_controller_start(ctrl); + if (status) + goto err_devinit; + + ssam_controller_unlock(ctrl); + + /* + * Initial SAM requests: Log version and notify default/init power + * states. + */ + status = ssam_log_firmware_version(ctrl); + if (status) + goto err_initrq; + + status = ssam_ctrl_notif_d0_entry(ctrl); + if (status) + goto err_initrq; + + status = ssam_ctrl_notif_display_on(ctrl); + if (status) + goto err_initrq; + + status = sysfs_create_group(&serdev->dev.kobj, &ssam_sam_group); + if (status) + goto err_initrq; + + /* Set up IRQ. */ + status = ssam_irq_setup(ctrl); + if (status) + goto err_irq; + + /* Finally, set main controller reference. */ + status = ssam_try_set_controller(ctrl); + if (WARN_ON(status)) /* Currently, we're the only provider. */ + goto err_mainref; + + /* + * TODO: The EC can wake up the system via the associated GPIO interrupt + * in multiple situations. One of which is the remaining battery + * capacity falling below a certain threshold. Normally, we should + * use the device_init_wakeup function, however, the EC also seems + * to have other reasons for waking up the system and it seems + * that Windows has additional checks whether the system should be + * resumed. In short, this causes some spurious unwanted wake-ups. + * For now let's thus default power/wakeup to false. + */ + device_set_wakeup_capable(&serdev->dev, true); + acpi_dev_clear_dependencies(ssh); + + return 0; + +err_mainref: + ssam_irq_free(ctrl); +err_irq: + sysfs_remove_group(&serdev->dev.kobj, &ssam_sam_group); +err_initrq: + ssam_controller_lock(ctrl); + ssam_controller_shutdown(ctrl); +err_devinit: + serdev_device_close(serdev); +err_devopen: + ssam_controller_destroy(ctrl); + ssam_controller_unlock(ctrl); +err_ctrl_init: + kfree(ctrl); + return status; +} + +static void ssam_serial_hub_remove(struct serdev_device *serdev) +{ + struct ssam_controller *ctrl = serdev_device_get_drvdata(serdev); + int status; + + /* Clear static reference so that no one else can get a new one. */ + ssam_clear_controller(); + + /* Disable and free IRQ. */ + ssam_irq_free(ctrl); + + sysfs_remove_group(&serdev->dev.kobj, &ssam_sam_group); + ssam_controller_lock(ctrl); + + /* Remove all client devices. */ + ssam_remove_clients(&serdev->dev); + + /* Act as if suspending to silence events. */ + status = ssam_ctrl_notif_display_off(ctrl); + if (status) { + dev_err(&serdev->dev, "display-off notification failed: %d\n", + status); + } + + status = ssam_ctrl_notif_d0_exit(ctrl); + if (status) { + dev_err(&serdev->dev, "D0-exit notification failed: %d\n", + status); + } + + /* Shut down controller and remove serdev device reference from it. */ + ssam_controller_shutdown(ctrl); + + /* Shut down actual transport. */ + serdev_device_wait_until_sent(serdev, 0); + serdev_device_close(serdev); + + /* Drop our controller reference. */ + ssam_controller_unlock(ctrl); + ssam_controller_put(ctrl); + + device_set_wakeup_capable(&serdev->dev, false); +} + +static const struct acpi_device_id ssam_serial_hub_match[] = { + { "MSHW0084", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, ssam_serial_hub_match); + +static struct serdev_device_driver ssam_serial_hub = { + .probe = ssam_serial_hub_probe, + .remove = ssam_serial_hub_remove, + .driver = { + .name = "surface_serial_hub", + .acpi_match_table = ssam_serial_hub_match, + .pm = &ssam_serial_hub_pm_ops, + .shutdown = ssam_serial_hub_shutdown, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, +}; + + +/* -- Module setup. --------------------------------------------------------- */ + +static int __init ssam_core_init(void) +{ + int status; + + status = ssam_bus_register(); + if (status) + goto err_bus; + + status = ssh_ctrl_packet_cache_init(); + if (status) + goto err_cpkg; + + status = ssam_event_item_cache_init(); + if (status) + goto err_evitem; + + status = serdev_device_driver_register(&ssam_serial_hub); + if (status) + goto err_register; + + return 0; + +err_register: + ssam_event_item_cache_destroy(); +err_evitem: + ssh_ctrl_packet_cache_destroy(); +err_cpkg: + ssam_bus_unregister(); +err_bus: + return status; +} +subsys_initcall(ssam_core_init); + +static void __exit ssam_core_exit(void) +{ + serdev_device_driver_unregister(&ssam_serial_hub); + ssam_event_item_cache_destroy(); + ssh_ctrl_packet_cache_destroy(); + ssam_bus_unregister(); +} +module_exit(ssam_core_exit); + +MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>"); +MODULE_DESCRIPTION("Subsystem and Surface Serial Hub driver for Surface System Aggregator Module"); +MODULE_LICENSE("GPL"); |